Oki Office 87 User Manual

Warranty and  
Regulatory Information  
Contents  
Overview  
Year 2000 Compliance ............................................ 4  
ENERGY STAR ............................................................ 4  
Limited Warranty: U.S. & Canada .............................. 5  
Overnight Exchange: U.S. & Canada ........................ 7  
Limited Warranty: LatinAmerica ............................ 10  
Oki Data Service Centers ........................................ 11  
Specifications.......................................................... 12  
Safety Information................................................... 13  
Installation Hints ................................................... 13  
Operation and Maintenance .................................. 13  
Toner Cartridge and Image Drum Unit Handling ..... 14  
Emergency First Aid ............................................. 14  
Regulatory Information ........................................... 15  
Federal Communications Commission (FCC) ........ 15  
Industry Canada (IC) ............................................. 18  
European Union Council of the European  
Communities Statements ................................... 19  
Material Safety Data Sheet ...................................... 20  
Warranty, Regulatory Information, and Specifications  
3
|
®
Year 2000 Compliance  
ENERGY STAR  
The OKIOFFICE 87 is Year 2000 Compliant. It contains  
information technology that accurately processes date  
and time data between the years 1999 and 2000, and  
carries no issue for the September 9, 1999 (9999) pro-  
gramming concern. These products, when used in combi-  
nation with products purchased from other manufactur-  
ers, whose products properly exchange data and time  
information, will accurately process the date and time.  
As an ENERGY STAR Partner, Oki Data has determined that  
this product meets the ENERGY STAR guidelines for energy  
efficiency.  
Warranty, Regulatory Information, and Specifications  
4
|
Limited Warranty: U.S. & Canada  
Overview  
Oki Data Americas, Inc. (Oki Data) warrants this  
OKIOFFICE 87 to be free from defect in material and  
workmanship and will remedy any such defect according  
to the terms of this Limited Warranty.  
Canada only; see Overnight Exchange) or return the  
OKIOFFICE product, shipping prepaid, in the original  
shipping container or equivalent, to Oki Data or an  
authorized Oki service center and assume the risk of  
loss or damage in transit. A written receipt for the  
product, showing the date and location of purchase, and  
both the model and serial numbers of this printer must  
accompany any request or claim for work or exchange to  
be performed under this Limited Warranty.  
Oki Data will repair (or at its option, replace) at no  
charge, any defective component(s) of the OKIOFFICE  
87 for one (1) year from the date of purchase except for  
the printhead (LED imaging array), which is warranted for  
a period of five (5) years from date of purchase. This  
Limited Warranty extends to the original purchaser only.  
This Limited Warranty does not extend to consumable  
items.  
This Limited Warranty shall not apply if the product has  
been damaged due to abuse, misuse, misapplication,  
accident, or as a result of service or modification by any  
other than an authorized Oki service center.  
To make request or claim for service under this Limited  
Warranty the original purchaser has the option to imple-  
ment the overnight exchange procedure (U.S. and  
Warranty, Regulatory Information, and Specifications  
5
|
THEREARE NO EXPRESS WARRANTIES OTHER  
THAN THOSE ON THE FACE HEREOFAND DE-  
SCRIBEDABOVE. NO WARRANTIES WHETHER  
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIM-  
ITED TO,ANY IMPLIED WARRANTIES OF MERCHANT-  
ABILITY OR FITNESS FOR A PARTICULAR PUR-  
POSE, SHALL EXTEND BEYOND THE RESPECTIVE  
WARRANTY PERIOD DESCRIBEDABOVE. Some  
states do not allow limitations on how long an implied  
warranty lasts, so the above limitation may not apply to  
you.  
Additional information on obtaining service under this  
Limited Warranty is available by contacting the Oki  
dealer from whom the product was purchased, by  
contacting Oki Data directly at 1-800-OKI-DATA  
(1-800-654-3282; U.S. and Canada, English only) or  
1-856-222-7496 (Spanish only), or by contacting one of  
the service depots listed on page11.  
This Limited Warranty applies to this OKIOFFICE 87.  
However, the procedure for obtaining service may vary  
outside the continental United States. Contact your Oki  
dealer for such warranty service information.  
OKI DATA SHALL NOT BE RESPONSIBLE OR LIABLE  
FORANY SPECIAL, INCIDENTALOR CONSEQUEN-  
TIAL DAMAGES OR LOSS ARISING FROM THE USE  
OF THIS PRODUCT. Some states do not allow the  
exclusion or limitation of incidental or consequential  
damages, so the above exclusion may not apply to you.  
This warranty gives you specific legal rights, and you  
may also have other rights which vary from state to  
state.  
Warranty, Regulatory Information, and Specifications  
6
|
Overnight Exchange: U.S. & Canada  
Overview  
Note: Available in the United States and Canada.  
in your being charged the full price of the exchange unit.  
Before you ship the OKIOFFICE 87, remove the image  
drum and toner cartridge to prevent damage to the  
OKIOFFICE 87 during shipment: failure to do so may  
result in a fee for cleaning/repairs, which will be charged  
to your account.  
If you choose to use our Overnight Exchange service,  
call 1-800-OKI-DATA(1-800-654-3282): our trained per-  
sonnel will try to solve your problem over the phone. If  
they determine that your OKIOFFICE 87 hardware is  
defective, an exchange unit will be shipped to you via air  
express. Have your credit card available, as our repre-  
sentative will be asking for this information. You will  
receive the exchange unit the next business day—or no  
later than the second business day.  
When Overnight Exchange is used, the returned machine  
becomes the property of Oki Data. Exchange units may  
be new or repaired/reconditioned, at the option of Oki  
Data: the exchange unit becomes the property of the  
customer when the returned machine has been picked up  
by Oki Data’s designated carrier. The exchange  
OKIOFFICE 87 will be warranted for thirty (30) days or  
the remaining warranty period of the originally purchased  
OKIOFFICE 87, whichever is longer.  
Return the original product to Oki Data by using the  
same packaging materials you received with the ex-  
change OKIOFFICE 87. You must pack the unit accord-  
ing to the instructions on the package. The OKIOFFICE  
87 to be returned must be made available for pickup by  
Oki Data’s representative within 2 business days of your  
receipt of the exchange unit: failure to do so may result  
Warranty, Regulatory Information, and Specifications  
7
|
Overnight Exchange of the OKIOFFICE 87 for a print-  
head failure is limited to one year from date of purchase.  
For the remaining printhead warranty period, replacement  
will be at an authorized service center or authorized third  
party service organization. Call 1-800-OKI-DATA  
(1-800-654-3282) for authorized service locations using  
our depot repair program.  
• Major credit card number and information, to  
secure the return and condition of the returned  
unit. (U.S.: Visa, MasterCard, American Express;  
Canada: Visa, American Express; this program is  
not available outside the U.S. & Canada.)  
Note: This information is kept confidential, and will  
only be used if the returned unit is not received,  
if no receipt is supplied confirming that the Oki  
Data carrier has picked up the package, or if  
the unit has been damaged due to improper  
repackaging. You will receive a phone call or  
letter within two to four weeks of the exchange  
date before any charge is initiated.  
How to activate your OKIOFFICE 87  
Overnight Exchange Warranty  
Follow these simple steps to take advantage of your  
OKIOFFICE 87 Overnight Exchange Warranty:  
1 Call us. If you are having problems with your  
OKIOFFICE 87, first contact our support staff at  
800-654-3282. (See your User’s Handbook or  
forms of support.) Our trained personnel will try to  
solve your problem over the phone.  
Note: If you cannot supply a credit card number, you  
may still have your unit serviced by an  
authorized Oki Data service center or service  
depot under the terms of the warranty.  
2 If they determine that your OKIOFFICE 87 is  
3 Fax or mail us the sales receipt for your  
OKIOFFICE 87, showing date and location of  
purchase, and model and serial number of the unit.  
defective, they will ask you for this information:  
• The address to send the replacement unit to:  
name, company, street address (not P.O. box),  
state, ZIP code, and phone number.  
Warranty, Regulatory Information, and Specifications  
8
|
4 We will ship a replacement OKIOFFICE 87 up to  
midnight ET and you should receive it the next  
business day—or Saturday if requested on Friday  
orders—and no later then two business days. The  
replacement will be a repaired/reconditioned “as  
new” machine and will require replacement of  
consumables—image drum and toner cartridge—  
from the original unit.  
5 Return the original unit—reuse the packing  
material from the exchange unit. Follow the en-  
closed instructions to schedule the return ship-  
ment—there is no additional cost.  
If you have any questions about this process and the  
complete warranty coverage and responsibilities please  
refer to page 5. If you need more help, contact our  
support professionals at 800-654-3282.  
Warranty, Regulatory Information, and Specifications  
9
|
Limited Warranty: Latin America  
Overview  
Oki Data warrants this multifunction printer (hereinafter  
Product) to be free in defect in material and workman-  
ship and will remedy any such defect according to the  
terms of this Limited Warranty. This Limited Warranty  
does not extend to consumable items, including but not  
limited to toner cartridges, fuses, etc.  
all transportation charges to the repair center. A written  
receipt for the Product, showing the date of purchase,  
dealer’s name, and both the model and serial numbers of  
the Oki Data Product must accompany any request or  
claim for work to be performed under this Limited War-  
ranty.  
Oki Data will repair (or at its option replace) at no  
charge, any defective component(s) of the Product for  
one (1) year from the date of purchase except for the  
printhead (LED imaging array), which is warranted for a  
period of five (5) years from date of purchase. This  
Limited Warranty extends to the original purchaser only.  
This shall not apply if the Product has been damaged  
due to abuse, misuse, misapplication, accident, or as a  
result of service or modification by any other than an  
authorized Oki Data service center.  
THEREARE NO EXPRESS WARRANTIES OTHER  
THAN THOSE ON THE FACE HEREOFAND DE-  
SCRIBEDABOVE. NO WARRANTIES EXPRESS OR  
APPLIED, INCLUDING, BUT NOT LIMITED TO, ANY  
PARTICULAR PURPOSE, SHALL EXTEND BEYOND  
THE RESPECTIVE WARRANTY PERIODS NOTED  
ABOVE.  
To make a request or claim for service under this  
Limited Warranty the original purchaser must return the  
Oki Data Product to Oki Data or an authorized Oki Data  
service center within the country purchased. The  
purchaser returning the Product for repair must pay for  
Warranty, Regulatory Information, and Specifications  
10  
|
Oki Data Service Centers  
Overview  
For the most up-to-date listing of Oki Data Service  
Centers:  
Mexico  
Oki Data de Mexico, S.A. de C.V.  
Mariano Escobedo No. 748-8 Piso  
Col Anzures, E. P 11590  
Mexico. DF  
• Consult our web site at www.okidata.com  
• In the U.S. and Canada, call 1-800-OKI-DATA  
(1-800-654-3282)  
Tel: 525-263-8780  
Fax: 525-263-8785  
• In Latin America, contact the Latin America Service  
Coordinator at Oki Data's Corporate Headquarters at  
856-222-7496 (Spanish only)  
Brazil  
Oki Data do Brasil, Ltda.  
United States  
Rua Alexandre Dumas, 22220-8 andar  
Chácara Sto Antonio  
São Paulo 04717-004, Brasil  
Oki Data Americas, Inc.  
2020 Bishops Gate Blvd.  
Mt. Laurel, NJ 08054  
Tel: 5511-3444-3500  
Fax: 5511-3444-3501  
Tel: 1-800-654-3282  
Fax: 1-856-222-5247  
Canada  
Oki Data Americas, Inc.  
2735 Matheson Blvd. East. Unit 1  
Mississauga, Ontario, Canada, L4W 4M8  
Tel: 800-654-3282  
Fax: 905-238-4427  
Warranty, Regulatory Information, and Specifications  
11  
|
Specifications  
Overview  
For additional specifications, see the on-line User’s  
Guide.  
Environmental  
Temperature  
Electrical  
Operating: 50 to 90°F (10 to 32°C)  
Power Off: 32 to 110°F (0 to 43°C)  
Storage: 14 to 110°F (-10 to +43°C)  
Voltage  
120 volts +6%/-15% (102-127V), 50/60 Hz, ±2%  
230 volts, +15%/-14% (198-264V), 50/60 Hz, ±2%  
Relative Humidity  
Operating: 20 to 80% RH  
Power Off: 10 to 90% RH  
Storage: 10 to 90% RH  
Maximum Power  
157W  
Warranty, Regulatory Information, and Specifications  
12  
|
Safety Information  
Overview  
• The TEL port on the back of the unit is only suitable for  
2-wire devices. Not all standard telephones will respond  
to incoming ringing when connected to an extension  
socket.  
Installation Hints  
• Install your OKIOFFICE 87 MFP in a dust-free  
location away from direct sunlight.  
• Do not plug your MFP into a power source shared by  
equipment which produces electrical noise (i.e., air  
conditioners, etc.).  
• This equipment may not necessarily provide for the  
effective hand-over of a call from a telephone  
connected to the same line.  
• Leave electronic adjustments to authorized service  
personnel.  
Operation and Maintenance  
• The LINE terminal connects your fax machine to a  
standard telephone line. To avoid damage to your  
telephone system or to the MFP, do not plug your fax  
machine into anything other than a standard RJ-11C  
jack.  
• Use a dry cloth to clean the control panel and the main  
body of the unit.  
Aside from replacing the toner and image drum car-  
tridge, do not disassemble or attempt to service this  
unit yourself. Refer to a qualified technician for service.  
Your MFP is intended to be grounded electrically and  
is equipped with a three-wire grounded power cord. For  
your safety, do not attempt to defeat your power cord’s  
grounding plug.  
• Disconnect the power cord before trying to remove any  
objects that may have fallen into the machine.  
• When relocating your MFP, always disconnect the  
telephone line before disconnecting the power cord,  
then reconnect the power cord first.  
• The power outlet should be located near the equipment  
and should be easily accessible.  
Warranty, Regulatory Information, and Specifications  
13  
|
• This unit is not intended to be used in parallel with any  
other telephone devices.  
• Do not expose these components to light for more than  
five minutes. Never expose the green drum (inside the  
image drum unit) to direct sunlight.  
• If anything happens that indicates that the MFP is not  
working properly or has been damaged, unplug it  
immediately and follow the instructions in the “Service  
and Support” section of your Setup Guide for having  
your MFP serviced. These are some of the things to  
look for:  
• Always hold the image drum unit by the ends—never  
by the middle. Never touch the surface of the green  
drum inside the image drum unit.  
• Exercise care when removing the toner cartridge. Do  
not let it touch your clothing or porous materials. The  
toner powder causes permanent stains.  
- The power cord or plug is frayed or damaged.  
• Small amounts of toner spilled on skin or clothing can be  
readily removed with soap and cold water. Using heated  
water will make removing the stain much more difficult.  
- Liquid has been spilled into the printer, or it has been  
exposed to water.  
- The MFP has been dropped, or the cabinet is dam-  
aged.  
Emergency First Aid  
- The MFP does not function properly when you’re  
following the operating instructions.  
If toner is swallowed: Dilute by giving two glasses of  
water and induce vomiting by administering Syrup of  
Ipecac (follow manufacturer’s instructions). Seek medi-  
cal attention. Never attempt to induce vomiting or give  
anything by mouth to a person who is unconscious.  
Toner Cartridge & Image Drum Handling  
• Leave unused toner cartridges and image drum units in  
their packages until needed. When replacing a toner  
cartridge or image unit, re-use the packaging to  
dispose of the old toner cartridge or image drum unit.  
Be sure to dispose of it in an environmentally sound  
manner.  
If toner is inhaled: Take person to an open area for  
fresh air. Seek medical attention.  
If toner gets in the eyes: Flush eyes with large  
quantities of cool water for 15 minutes, keeping eyelids  
open with fingers. Seek medical attention.  
• See the Material Safety Data Sheet in the back of this  
booklet for more information.  
Warranty, Regulatory Information, and Specifications  
14  
|
Regulatory Information  
Overview  
3 The REN is used to determine the quantity of  
devices which may be connected to the telephone  
line. Excessive REN’s on the telephone line may  
result in the devices not ringing in response to an  
emergency call. In most, but not all areas, the sum  
of the REN’s should not exceed five (5.0). To be  
certain of the number of devices that may be  
connected to the line, as determined by the total  
REN’s, contact the telephone company to deter-  
mine the maximum REN for your calling area.  
Federal Communications Commission  
(FCC) Requirements for End Users  
This device has been granted a registration number by  
the Federal Communications Commission, under Part 68  
rules and regulations for direct connection to the tele-  
phone lines. In order to comply with these FCC rules, the  
following instructions must be carefully read and appli-  
cable portions followed completely.  
1 This equipment complies with Part 68 of FCC rules.  
On the back of the equipment is a label that con-  
tains, among other information, the FCC registra-  
tion number and ringer equivalence number (REN)  
for this equipment. If requested, this information  
must be provided to the telephone company.  
4 If the equipment causes harm to the telephone  
network, the telephone company will notify you in  
advance. But if advance notice isn’t practical, the  
telephone company will notify the customer as  
soon as possible. Also, you will be advised of your  
right to file a complaint with the FCC if you believe  
it is necessary.  
2 The following USOC jacks may be used with this  
equipment: RJ11C.  
Warranty, Regulatory Information, and Specifications  
15  
|
5 The telephone company may make changes in its  
facilities, equipment, operations, or procedures that  
could affect the operation of the equipment. If this  
happens, the telephone company will provide  
advance notice in order for you to make the neces-  
sary modifications to maintain uninterrupted ser-  
vice.  
tariffs. Contact your state Public Utility Commis-  
sion, Public Service Commission, or Corporate  
Commission for information.  
9 This equipment is hearing-aid compatible.  
FCC Telephone Consumer Protection Act  
The Federal Communications Commission Telephone  
Consumer Protection Act of 1991 makes it unlawful for  
any person to use a computer or other electronic device  
to send any message via a telephone fax machine  
unless such message clearly contains in a margin at the  
top or bottom of each transmitted page or on the first  
page of the transmission, the date and time it is sent and  
an identification of the business or other entity, or other  
individual sending the message, and the telephone  
number of the sending machine or such business, other  
entity, or individual.  
6 If trouble is experienced with this equipment,  
please contact the following for repair and/or  
warranty information:  
Oki Data Americas, Inc.  
2020 Bishops Gate Blvd  
Mount Laurel, N.J. 08054  
Telephone:(856) 235-2600 or  
(800)-OKI-DATA(800-654-3282)  
If the trouble is causing harm to the telephone  
network, the telephone company may request that  
you remove the equipment from the network until  
the problem is resolved.  
To comply with this law, you must enter the following  
information in your fax unit:  
• Date and time: see the Setup Guide for instructions on  
doing this.  
7 This equipment contains no user serviceable parts.  
Please contact Oki Data for service.  
• Name and telephone number which identify the source  
of your fax transmission: see the Setup Guide for  
instructions on doing this.  
8 This equipment cannot be used on public coin  
service provided by the telephone company. Con-  
nection to Party Line Service is subject to state  
Warranty, Regulatory Information, and Specifications  
16  
|
A properly shielded interface cable must be used in order  
to ensure compliance of this equipment with FCC regula-  
tions.  
FCC Radio Frequency Interference  
Statements  
Changes or modifications not expressly approved by Oki  
Data may void your authority to operate this device.  
120-Volt Models  
This equipment has been tested and found to comply with  
the limits for a Class B digital device, pursuant to Part 15  
of the FCC rules. These limits are designed to provide  
reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses and  
can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause  
harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or  
more of the following measures:  
230/240-Volt Models  
WARNING: This equipment has been tested and found to  
comply with the limits for a Class A digital device,  
pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harm-  
ful interference when the equipment is operated in a  
commercial environment. This equipment generates,  
uses and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions,  
may cause harmful interference to radio communications.  
Operation of this equipment in a residential area is likely  
to cause harmful interference in which case the user will  
be required to correct the interference at his own ex-  
pense.  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and  
the receiver.  
It is the responsibility of the user to obtain the required  
shielded cable in order to ensure compliance of this  
equipment with FCC regulations.  
• Plug the unit into an outlet on a circuit different from  
that to which the receiver is connected.  
Changes or modifications not expressly approved by Oki  
Data may void your authority to operate this device.  
• Consult the dealer or an experienced radio television  
technician for help.  
Warranty, Regulatory Information, and Specifications  
17  
|
Repairs to certified equipment should be made by an  
authorized Canadian maintenance facility designated by  
the supplier. Any repairs or alterations made by the user  
to this equipment, or equipment malfunctions, may give  
the telecommunications company cause to request the  
user to disconnect the equipment.  
Industry Canada (IC) Requirements for End  
Users  
The Industry Canada label identifies certified equipment.  
This certification means that the equipment meets  
certain telecommunications network protective, opera-  
tional and safety requirements. The Department does not  
guarantee the equipment will operate to the user’s satis-  
faction.  
Users should ensure for their own protection that the  
electrical ground connections of the power utility, tele-  
phone lines and internal metallic water pipe system, if  
present, are connected together. This precaution may be  
particularly important in rural areas.  
Before installing this equipment, users should ensure  
that it is permissible to be connected to the facilities of  
the local telecommunications company. The equipment  
must also be installed using an acceptable method of  
connection. In some cases, the company’s inside wiring  
associated with a single line individual service may be  
extended by means of a certified connector assembly  
(telephone extension cord). The customer should be  
aware that compliance with the above conditions may not  
prevent degradation of service in some situations.  
• Users should not attempt to make such connections  
themselves, but should contact the appropriate electric  
inspection authority, or electrician, as appropriate.  
The Load Number assigned to each terminal device  
denotes the percentage of the total load to be connected  
to a telephone loop which is used by the device, to  
prevent overloading. The termination of a loop may  
consist of any combination of devices subject only to the  
requirement that the total of the Load Numbers of all the  
devices does not exceed 100.  
Warranty, Regulatory Information, and Specifications  
18  
|
IC Radio Interference Statements  
120-Volt Models  
European Union Council of the European  
Communities Statements for 230/240-Volt  
Models  
This OKI apparatus complies with Class B limits for radio  
interference as specified in the Industry Canada Radio  
Interference Regulations.  
Electromagnetic Conformance Statement  
This product complies with the requirements of the  
Council Directive 89/336/EEC on the approximation of  
the laws of the member states relating to electromag-  
netic compatibility.  
230/240-Volt Models  
This OKI apparatus complies with the Class A limits for  
radio interference as specified in the Industry Canada  
Radio Interference Regulations.  
Safety Conformance Statement  
This product is in conformity with Directive 73/23/EEC on  
the harmonization of the laws of Member States relating  
to electrical equipment designed for use within certain  
voltage limits.  
Warranty, Regulatory Information, and Specifications  
19  
|
Material Safety Data Sheet  
Overview  
Emergency First Aid Procedures  
OKIOFFICE 87 Toner (Type 6),  
P/N 52111701, MSDS #58331801  
For more information, contact Oki Data at:  
Toner swallowed (ingested)  
Dilute by giving two glasses of water and induce vomit-  
ing by administering Syrup of Ipecac (follow  
manufacturer’s instructions). Seek medical attention.  
NEVER give anything by mouth or attempt to induce  
vomiting in a person who is unconscious.  
2000 Bishops Gate Boulevard  
Mount Laurel, NJ 08054-4620  
Emergency Information:  
call 1-800-OKI-DATA(1-800-654-3282)  
Toner inhaled  
Remove person to fresh air. Seek medical attention.  
Toner gets in the eyes  
Flush eyes with large quantities of cool water for 15  
minutes, keeping the eyelids open with fingers. Seek  
medical attention.  
Note: Small amounts of toner on skin or clothing can  
easily be removed with soap and cold water.  
Hot water makes toner harder to remove.  
Current as of 5/12/01  
Warranty, Regulatory Information, and Specifications  
20  
|
Hazardous Ingredients  
Physical Data  
Styrene-Butyl Acrylate Copolymer (91% by weight)  
Melting Point: 110°C (230°F)  
CAS# 25767-47-9  
Boiling Point: Not applicable  
OSHA TWA 15 mg/m3 for total dust  
ACGIH TLV 10 mg/m3 for total dust  
Vapor Pressure: Not applicable  
Vapor Density (Air=1): Not applicable  
Evaporation Rate (Butyl Acetate=1): Not applicable  
Specific Gravity (H2O=1): 1.15  
Solubility in water: Negligible  
Carbon Black (5-7% by weight)  
CAS# 1333-86-4  
OSHA TWA 3.5 mg/m3  
ACGIH TLV 3.5 mg/m3  
Appearance and odor: Black granules, no odor  
Polypropylene (less than 3% by weight)  
CAS# 9003-07-0  
OSHA TWA 15 mg/m3 for total dust  
ACGIH TLV 10 mg/m3 for total dust  
Amorphous Fumed Silica (less than 1% by weight)  
CAS# 67762-90-7  
OSHA PEL 15.0 mg/m3 for total dust  
ACGIH TLV 10.0 mg/m3 for total dust  
Note: This product is not regulated under Section 313  
of SARA, Title III.  
Warranty, Regulatory Information, and Specifications  
21  
|
2 Carbon black  
Fire and Explosion Hazard Data  
Flash Point (Method Used): Not applicable  
Flammable Limits  
(Group 2B “Possible Carcinogen”; IARC)  
Overexposure to carbon black is associated with  
causing irritation, conjunctivitis, and corneal hypo-  
plasia of the eyes; minor irritation and eczema of  
the skin; and irritation and bronchitis. Long-term  
inhalation exposure may be associated with caus-  
ing lung cancer.  
Lower Explosive Limit: Not applicable  
Upper Explosive Limit: Not applicable  
Extinguishing Media: Water, CO2, Dry Chemical, or  
Foam  
Special Fire Fighting Procedures: Do not use methods  
that may create a dust cloud, such as high pressure  
water and/or steam  
3 Polypropylene  
(Group 3 “Not Classifiable”; IARC)  
Subcutaneous implantation of polypropylene  
powder in rats has induced tumors at the site of  
implantation.  
Unusual Fire and Explosion Hazards:  
– Organic components decompose at 200-455°C (392-  
851°F).  
4 Amorphous Fumed Silica  
– Material may explosively combust when finely  
suspended in air.  
(Group 3 “Not Classifiable”; IARC)  
Overexposure to amorphous silica has been asso-  
ciated with causing irritation of the lungs and  
pneumoconiosis. Long-term inhalation exposure  
may be associated with producing tumors in labora-  
tory animals.  
– Thermal decomposition of organic components may  
result in release of oxides of carbon and nitrogen.  
Health Hazards Data  
Routes of Entry: Inhalation, Ingestion, Eyes, Skin.  
1 Styrene-Butyl Acrylate Copolymer  
Subcutaneous implantation of polymeric styrene  
powder in rats has induced tumors at the site of  
implantation.  
Warranty, Regulatory Information, and Specifications  
22  
|
Reactivity Data  
Spill Cleanup and Disposal  
Spill Cleanup  
Stability: Stable  
Polymerization: Will not occur.  
Small Spills  
Hazardous Decomposition Products: Thermal decom-  
position may result in release of oxides of carbon and  
nitrogen.  
1 Remove sources of ignition.  
2 Clean up spill with wet cloth.  
Large Spills  
Temperature: Do not expose to temperatures above  
200°C (392°F).  
1 Remove sources of ignition.  
2 Wear protective gear: respirator, rubber gloves,  
Incompatibility: Avoid exposure to strong oxidizers.  
goggles (see below)  
3 Clean up spill with scoop, being careful not to  
generate a lot of dust.  
Waste Disposal  
Follow appropriate federal, state and local regulations.  
Warranty, Regulatory Information, and Specifications  
23  
|
Safe Handling and Use  
To the best of the manufacturer’s knowledge, the  
information contained herein is accurate. However,  
neither the manufacturer, nor any of its affiliates,  
make any representations or warranties (expressed or  
implied), nor assumes any liability (including liability  
for any direct, incidental, consequential, or other  
damages) with respect to the accuracy or complete-  
ness of the information contained herein. Such infor-  
mation may be (without limitation) invalid if the speci-  
fied material is used in combination with another, in a  
particular process, or under unusual conditions.  
Determination of suitability of any material for any  
given purpose is the sole responsibility of the user  
who assumes all risk and responsibility therefor. All  
materials may present unknown hazards and should  
be used with appropriate caution. The manufacturer  
cannot and does not guarantee that the hazards  
described herein are the only ones that exist.  
Respiratory Protection: Not normally required. For large  
spills, use NIOSH-approved full face-piece respirator  
with HEPAcartridge during cleanup.  
Protective Gloves and/or Eye Protection: Not normally  
required. For large spills, use rubber gloves and chemi-  
cal worker’s goggles during cleanup.  
Ventilation: Outside of normal ventilation, not normally  
required.  
Other Protective Equipment and/or Hygienic Prac-  
tices: None  
Special Precautions  
Precautions for Handling or Storage: Protect from high  
heat. Avoid making dust.  
Other Precautions: None  
Warranty, Regulatory Information, and Specifications  
24  
|

Samsung Sh12ya9 User Manual
Revolutionary Cooling Systems Puron 704b024 User Manual
Planar Bat24si User Manual
Motorola B801 User Manual
Lexmark 7300 Series User Manual
DEZCTOP DA DBMONT BK1 User Manual
CRAFTSMAN 917.272440 User Manual
CRAFTSMAN 917.272246 User Manual
BROTHER HL L2305W User Manual
ACER E131D User Manual