Projector
P525UL/P525WL
User’s Manual
Please visit our web site for User’s Manual in the latest version.
https://www.nec-display.com/dl/en/pj_manual/lineup.html
Model No.
NP-P525UL/NP-P525WL
Table of Contents
5. Making Connections ........................................................................................................................ 81
5-1. Connecting Your Computer ........................................................................................................... 81
5-2. Connecting to a DVD player and other AV devices ............................................................... 84
5-3. Connecting to a Wired LAN ............................................................................................................ 86
5-4. Connecting to a Wireless LAN (Optional: NP05LM series) ................................................... 87
5-5. Connecting to a HDBaseT transmission device (sold commercially) .............................. 90
5-6. Portrait projection (vertical orientation) ................................................................................... 92
6. Using the VIEWER ............................................................................................................................. 95
6-1. Things you can do with the VIEWER ............................................................................................ 95
6-2. Projecting the pictures on a USB memory (basic operation) ............................................. 96
6-3. Slide screen operations .................................................................................................................. 100
6-4. File list screen operations .............................................................................................................. 101
6-5. Option menu ..................................................................................................................................... 103
6-6. Changing the logo data (background image) ....................................................................... 104
7. Connecting to a Network ........................................................................................................... 106
7-1. Things you can do by connecting the projector to a network ........................................ 106
7-2. Connecting to MultiPresenter ..................................................................................................... 107
7-3. NETWORK SETTINGS ....................................................................................................................... 109
7-4. HTTP server function ...................................................................................................................... 115
8. Maintenance .................................................................................................................................... 119
8-1. Cleaning the Lens ............................................................................................................................ 119
8-2. Cleaning the Cabinet ...................................................................................................................... 120
9. Appendix ............................................................................................................................................ 121
9-1. Setting Up the Screen and the Projector ................................................................................. 121
9-2. Compatible Input Signal List ........................................................................................................ 125
9-3. Specifications .................................................................................................................................... 127
9-4. Cabinet Dimensions ........................................................................................................................ 130
9-5. Pin assignments and signal names of main terminals ........................................................ 131
9-6. PC Control Codes and Cable Connection ................................................................................ 133
9-7. About the ASCII Control Command .......................................................................................... 135
9-8. Troubleshooting ............................................................................................................................... 137
9-9. Indicator Message ............................................................................................................................ 140
9-10. Setting the date and time in the projector .......................................................................... 144
9-11. Troubleshooting Check List ....................................................................................................... 146
9-12. REGISTER YOUR PROJECTOR! (for residents in the United States, Canada, and
Mexico) ................................................................................................................................................... 148
ii
Introduction
Thank you for purchasing the NEC projector.
This projector can be connected to computers, video devices, etc. to project images sharply onto
a screen.
Please read this manual carefully before using your projector and keep the manual handy for future
reference.
Read this user’s manual if you have any doubts about operation or if you believe the projector may
be faulty.
NOTES
(1) The contents of this user’s manual may not be reprinted in part or whole without permission.
(2) The contents of this user’s manual are subject to change without notice.
(3) Great care has been taken in the preparation of this user’s manual; however, should you notice
any questionable points, errors or omissions, please contact us.
(4) Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or other
matters deemed to result from using the Projector.
Ver. 2 12/18
iii
Important Information
About the symbols
To ensure safe and proper use of the product, this manual uses a number of symbols to prevent
injury to you and others as well as damage to property.
The symbols and their meanings are described below. Be sure to understand them thoroughly
before reading this manual.
Failing to heed this symbol and handling the product erroneously
could result in accidents leading to death or major injury.
WARNING
Failing to heed this symbol and handling the product erroneously
could result in personal injury or damage to surrounding property.
CAUTION
Examples of symbols
This symbol indicates you should be careful of electric shocks.
This symbol indicates you should be careful of high temperatures.
This symbol indicates something that must be prohibited.
This symbol indicates something that must not be got wet.
This symbol indicates you should not touch with wet hands.
This symbol indicates something that must not be disassembled.
This symbol indicates things you must do.
This symbol indicates that the power cord should be unplugged from the power outlet.
iv
Important Information
Safety Cautions
WARNING
Handling the power cord
• Please use the power cord supplied with this projector. If the supplied power
cord does not satisfy requirements of your country’s safety standard, and
voltage and current for your region, make sure to use the power cord that
conforms to and satisfies them.
BE SURE TO DO
• The power cord you use must be approved by and
comply with the safety standards of your country.
Please refer to the page 128 about the power cord
specification.
Rated voltage by country is listed below for your refer-
ence. For selecting an appropriate power cord, please
check rated voltage for your region by yourself.
AC 230 V
AC 120 V
European countries
North America
• The power cord included with this projector is exclusively for use with this
projector. For safety, do not use it with other devices.
PROHIBITION
• Handle the power cord with care. Damaging the cord could lead to fire or
electric shock.
- Do not place heavy objects on the cord.
- Do not place the cord under the projector.
- Do not cover the cord with a rug, etc.
HAZARDOUS
VOLTAGE
- Do not scratch or modify the cord.
- Do not bend, twist or pull the cord with excessive force.
- Do not apply heat to the cord.
Should the cord be damaged (exposed core wires, broken wires, etc.), ask
your dealer to replace it.
• Do not touch the power plug should you hear thunder. Doing so could result
in electric shock.
v
Important Information
Installing the Projector
• This projector is designed to be used with a 100–240 V AC, 50/60 Hz power
supply. Before using the projector, check that the power supply to which the
projector is to be connected meets these requirements.
• Use a power outlet as the projector’s power supply. Do not connect the
projector directly to electrical light wiring. Doing so is dangerous.
• Do not use in places such as those described below. Doing so could lead to
fire or electric shock.
- Shaky tables, inclined surfaces or other unstable places
- Near heating appliances or places with heavy vibrations
- Outdoors or humid or dusty places
BE SURE TO DO
PROHIBITION
- Places exposed to soot or steam
- Near cooking appliances, humidifiers, etc.
• Do not use in places such as those described below where the projector could
get wet. Doing so could lead to fire or electric shock.
- Do not use in the rain or snow, on a seashore or waterfront, etc.
- Do not use in a bathroom or shower room.
DO NOT WET
- Do not place vases or potted plants on the projector.
- Do not place cups, cosmetics or medicines on the projector.
Should water, etc. get inside the projector, first turn off the projector’s power,
then unplug the power cord from the power outlet and contact your dealer.
• Do not insert or drop metal or combustible objects or other foreign materials
into the projector from the vents. Doing so could lead to fire or electric shock.
Be particularly careful if there are children in the home. Should a foreign object
get inside the projector, first turn off the projector’s power, then unplug the
power cord from the power outlet and contact your dealer.
UNPLUG THE
POWER CORD
Unplug the power cord if the projector malfunctions.
• Should the projector emit smoke or strange odors or sounds, or if the projector
has been dropped or the cabinet broken, turn off the projector’s power, then
unplug the power cord from the power outlet. Failure to do so could not only
lead to fire or electric shock, it could also result in vision impairment. Contact
your dealer for repairs.
UNPLUG THE
POWER CORD
Never try to repair the projector on your own. Doing so is dangerous.
Do not disassemble the projector.
• Do not remove or open the projector’s cabinet.
Also, do not modify the projector.There are high voltage areas in the projector.
Modifying the projector could lead to fire, electric shock or leakage of laser
beams.
Have qualified service personnel perform inspection, adjustments and repairs
of the interior.
DO NOT
DISASSEMBLE
vi
Important Information
Installing suspended from the ceiling
• Should special works be required, for example to suspend the projector from
the ceiling, consult your dealer.
Never try to install the projector yourself in such cases. The projector could
drop and cause injury.
CAUTION
Suspending the projector from the ceiling requires sufficient ceiling strength
to support the projector, and the building standards laws in your particular
country must be followed.
It is also necessary to take measures to prevent the projector from dropping
in anticipation of a malfunction occurring in the projector, ceiling mounting
device and installation location.
• When installed suspended from the ceiling, etc. do not hang from the projec-
tor. The projector could drop and cause injury.
• When installing suspended from the ceiling, use a power outlet that is within
reach so the power cord can be easily plugged and unplugged.
Do not place objects in front of the lens while the projector is
operating.
• Do not leave the lens cap on the lens while the projector is operating. The
lens cap could get hot and be warped.
• Do not place objects in front of the lens that obstruct the light while the
projector is operating. The object could get hot and be broken or catch fire.
• The below pictogram indicated on the cabinet means the precaution for
avoiding to place objects in front of the projector lens.
PROHIBITION
CAUTION
FOR HIGH
TEMPERATURE
vii
Important Information
About the projector’s light source
• Do not look into the projector’s lens.
Strong light that could damage your eyes is projected when the projector is
operating. Be especially careful when children are around.
• Do not look at the projected light using optical devices (magnifying glasses,
reflectors, etc.). Doing so could result in vision impairment.
PROHIBITION
• Check that there is no one looking at the lens within the projection range
before turning on the projector.
• Do not allow children to operate the projector alone.When a child is operating
the projector an adult should always be present and watch the child carefully.
• The below pictogram, that is indicated near the lens on the cabinet, describes
this projector is categorized in the risk group 2 of IEC 62471-5:2015. As with
any bright light source, do not stare into the beam, RG2 IEC 62471-5:2015.
When cleaning the projector
• Do not use flammable gas sprays to remove dust from the lens, cabinet, etc.
Doing so could lead to fire.
PROHIBITION
viii
Important Information
CAUTION
Connecting the power cord to earth
• This equipment is designed to be used in the condition of the power cord
connected to earth. If the power cord is not connected to the earth, it may
cause electric shock. Please make sure the power cord is earthed properly.
Do not use a 2-core plug converter adapter.
BE SURE TO DO
BE SURE TO DO
Handling the power cord
• When connecting the power cord to the projector’s AC IN terminal, make sure
the connector is fully and firmly inserted. Loose connection of the power cord
could lead to fire or electric shock.
• Do not connect or disconnect the power cord with wet hands. Doing so could
result in electric shock.
DO NOT TOUCH
WITH WET
HANDS
• When cleaning the projector, for safety purposes unplug the power cord from
the power outlet beforehand.
• When moving the projector, first be sure to turn off the power, unplug the
power cord from the power outlet and check that all connection cables con-
necting the projector to other devices have been disconnected.
• When planning not to use the projector for long periods of time, always
unplug the power cord from the power outlet.
UNPLUG THE
POWER CORD
Do not use on networks subject to overvoltage.
• Connect the projector’s Ethernet/HDBaseT port and LAN port to a network
for which there is no risk of overvoltage being applied.
Overvoltage applied to the Ethernet/HDBaseT or LAN port could result in
electric shock.
PROHIBITION
BE SURE TO DO
Lens shift, focus and zoom operations
• When shifting the lens or adjusting the focus or zoom, do so from either
behind or to the side of the projector. If these operations are performed from
the front, your eyes could be exposed to strong light and get injured.
• Keep your hands away from the lens area when performing the lens shift op-
eration. If not, your fingers could get caught in the gap between the cabinet
and the lens.
ix
Important Information
Handling batteries
• Handle batteries with caution. Failure to do so could lead to fire, injury or
contamination of the surroundings.
- Do not short-circuit or take apart batteries or dispose of them in flames.
- Do not use batteries other than those specified.
PROHIBITION
- Do not use new batteries together with old ones.
- When inserting batteries, pay attention to the polarities (+ and − directions),
and be sure to insert them as indicated.
• Contact your dealer or local authorities when disposing of batteries.
About the vents
• Do not obstruct the projector’s vents. Also, do not place such soft objects as
paper or cloths underneath the projector. Doing so could lead to fire.
Leave sufficient space between the place where the projector is installed and
its surroundings (as a general rule, at least 10 cm/4 inches for the intake vent,
20 cm/8 inches for the exhaust vent).
PROHIBITION
• Do not touch the exhaust vent area while projecting or immediately after
projecting images. The exhaust vent area may be hot at this time and touch-
ing it could cause burns.
CAUTION
FOR HIGH
TEMPERATURE
Moving the projector
• When moving the projector, do not hold the lens section. The focus ring
could turn, causing the projector to drop and resulting in injury. Also, if you
put your hand on the gap between the cabinet and the lens, the projector
may be damaged, falling and causing injury.
PROHIBITION
BE SURE TO DO
Inspecting the projector and cleaning the inside
• Consult with your dealer about once per year for cleaning of the inside of the
projector. Dust could accumulate inside of the projector if it is not cleaned
for extended periods of time, leading to fires or malfunction.
x
Important Information
Laser Safety Caution
WARNING
CLASS 2 OF IEC 60825-1 SECOND EDITION LASER PRODUCT
• LASER RADIATION - DO NOT STARE INTO BEAM.
• Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
•
For USA
This product is classified as Class 2 of IEC 60825-1 Second edition 2007-03.
Complies with FDA performance standards for laser products except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007.
For other regions
This product is classified as Class 1 of IEC 60825-1 Third edition 2014-05 and RG2 of IEC 62471-5
First edition 2015-06.
Obey the laws and regulations of your country in relation to the installation and management of
the device.
• Outline of laser emitted from the built-in light module:
• Wave length: 449–461 nm
• Maximum power: 95 W
• Radiation pattern from the protective housing:
• Wave length: 449–461 nm
• Maximum laser radiation output: 66.6 mW
• The laser module is equipped in this product. Use of controls or adjustments of procedures other
than those specified herein may result in hazardous radiation exposure.
Light Module
• A light module containing multiple laser diodes is equipped in the product as the light source.
• These laser diodes are sealed in the light module. No maintenance or service is required for the
performance of the light module.
• End user is not allowed to replace the light module.
• Contact qualified distributor for light module replacement and further information.
xi
Important Information
• The caution and the explanatory labels of the LASER PRODUCT in CLASS 2 conforming to IEC
60825-1 Second edition, and in Class 1 conforming to IEC 60825-1 Third edition are stuck on the
below indicated positions.
For USA
Label
For other regions
xii
Important Information
Laser light radiation range
The figure below shows the maximum radiation range of the laser light.
Horizontal angle (unit: degree)
Lens position
Zoom
Right most
HR
Center (Reference value)
Left most
HL
HC
Wide
Tele
33.0
22.3
14.2
33.0
21.8
21.8
Right
HR
HC
HC
HL
Left
Vertical angle (unit: degree)
Zoom
Lens position
Upper most
Center (Reference value)
VU
VC
14.4
9.0
Wide
Tele
29.5
19.2
Upper
VU
VC
VC
xiii
Important Information
Cable information
Use shielded cables or cables attached ferrite cores so as not to interfere with radio and television
reception.
For details, please refer to “5. Making Connections”in this user’s manual.
FCC Information (for USA only)
WARNING
• The Federal Communications Commission does not allow any modifications or changes to the
unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure
to comply with this government regulation could void your right to operate this equipment.
• This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio / TV technician for help.
Supplier’s declaration of conformity (for USA only)
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions.
(1)This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
U.S.Responsible Party:
Address:
NEC Display Solutions of America, Inc.
3250 Lacey Rd, Ste 500
Downers Grove, IL 60515
630-467-3000
Telephone Number:
Type of Product:
Projector
Equipment Classification:
Model Number:
Class B Peripheral
NP-P525UL/NP-P525WL
xiv
Important Information
Disposing of your used product
In the European Union
EU-wide legislation as implemented in each Member State requires that used electrical
and electronic products carrying the mark (left) must be disposed of separately from
normal household waste. This includes projectors and their electrical accessories. When
you dispose of such products, please follow the guidance of your local authority and/or
ask the shop where you purchased the product.
After collecting the used products, they are reused and recycled in a proper way. This
effort will help us reduce the wastes as well as the negative impact to the human health
and the environment at the minimum level.
The mark on the electrical and electronic products only applies to the current European
Union Member States.
Outside the European Union
If you wish to dispose of used electrical and electronic products outside the European
union, please contact your local authority and ask for the correct method of disposal.
For EU: The crossed-out wheeled bin implies that used batteries should not be put to
the general household waste! There is a separate collection system for used batteries,
to allow proper treatment and recycling in accordance with legislation.
According the EU directive 2006/66/EC, the battery can’t be disposed improperly.The battery
shall be separated to collect by local service.
(for Germany only)
Machine Noise Information Regulation - 3. GPSGV,
The highest sound pressure level is less than 70 dB (A) in accordance with EN ISO 7779.
Information of the AUDIO OUT mini jack
The AUDIO OUT mini jack does not support earphone/headphone terminal.
xv
Important Information
Cautions for ensuring the projector’s performance
• Do not install in places subject to vibrations or shocks.
If installed in places where the vibrations from power sources and the like are conveyed, or in
vehicles or on vessels, etc. the projector could be affected by vibrations or shocks that may dam-
age internal parts and lead to malfunction.
Install in a place not subject to vibrations or shocks.
• Do not install near high voltage power lines or power sources.
The projector may be affected by interference if it is installed near a high voltage power line or
a power source.
• Do not install or store in such places as those described below. Doing so could lead to malfunc-
tion.
- Places where strong magnetic fields are generated
- Places where corrosive gases are generated
• If intense light like laser beams enters from the lens, it could lead to malfunction.
• Consult your dealer before using in places where much cigarette smoke or dust is present.
• When the same still image is projected for a long period of time with a computer, etc. the pattern
of the image may remain on the screen after the projection is stopped, but it will disappear after
a while. This happens due to the properties of liquid crystal panels, and is not a malfunction. We
recommend using a screensaver on the computer side.
• When using the projector at altitudes of about 1,700 m/5,500 feet or higher, be sure to set the [FAN
MODE] to [HIGH ALTITUDE]. If not, the inside of the projector may get hot, leading to malfunction.
• When the projector is used at high altitudes (places where the atmospheric pressure is low), it
may be necessary to replace the optical parts (light source, etc.) sooner than usual.
• About moving the projector
- Be sure to mount the included lens cap to protect the lens from scratches.
- Do not subject the projector to vibrations or strong shocks.
The projector could be damaged otherwise.
• Do not use the tilt feet for purposes other than adjusting the projector’s tilt.
Improper handling, such as carrying the projector by the tilt feet or using it leaned against a wall,
could lead to malfunction.
• Do not touch the surface of the projection lens with bare hands.
Fingerprints or dirt on the surface of the projection lens will be enlarged and projected on the
screen. Do not touch the surface of the projection lens.
• Do not unplug the power cord from the projector or the power outlet while projecting. Doing so
could cause deterioration of the projector’s AC IN terminal or power plug contact. To interrupt
the AC power supply while images are being projected, use a power strip switch, a breaker, etc.
• About handling of the remote control
- The remote control will not work if the projector’s remote signal sensor or the remote control’s
signal transmitter is exposed to strong light or if there are obstacles between them that obstruct
the signals.
- Operate the remote control from within 7 meters from the projector, pointing it at the projec-
tor’s remote signal sensor.
- Do not drop the remote control or handle it improperly.
- Do not let water or other liquids get on the remote control. Should the remote control get wet,
wipe it off immediately.
- Avoid using in hot and humid places as far as possible.
- When planning not to use the remote control for long periods of time, remove both batteries.
xvi
Important Information
• Take measures to prevent external light from shining on the screen.
Make sure only the light from the projector shines on the screen. The less external light on the
screen, the higher the contrast and the more beautiful the images.
• About screens
Images will not be clear if there is dirt, scratches, discoloration, etc. on your screen. Handle the
screen with care, protecting it from volatile substances, scratches and dirt.
Clearance for Installing the Projector
When installing the projector, keep sufficient space around it, as described below. If not, the hot
exhaust emitted from the projector may be taken back in.
Also, make sure no wind from an air-conditioner hits the projector.
The projector’s heat control system may detect an abnormality (temperature error) and automati-
cally shut off the power.
20 cm/8" or greater
Wall
Exhaust vent
NOTE:
•
In the above figure, it is assumed that there is sufficient space above the projector. There is also an intake vent on the back. Leave
enough space behind to install the cables.
xvii
Important Information
About Copyright of original projected pictures:
Please note that using this projector for the purpose of commercial gain or the attraction of public
attention in a venue such as a coffee shop or hotel and employing compression or expansion of the
screen image with the following functions may raise concern about the infringement of copyrights
which are protected by copyright law.
[ASPECT RATIO], [KEYSTONE], Magnifying feature and other similar features.
Power management function
The projector has power management functions. To reduce power consumption, the power man-
agement functions (1 and 2) are factory preset as shown below. To control the projector from an
external device via a LAN or serial cable connection, use the on-screen menu to change the settings
for 1 and 2.
1. STANDBY MODE (Factory preset: NORMAL)
To control the projector from an external device, select [NETWORK STANDBY] or [SLEEP] for
[STANDBY MODE]. (→ page 74)
2. AUTO POWER OFF (Factory preset: 1 hour)
To control the projector from an external device, select [OFF] for [AUTO POWER OFF]. (→
page 76)
Model Number of Wireless LAN unit
Wireless LAN unit is an optional item.
To find the appropriate model to your area, please visit the company website:
URL: https://www.nec-display.com/global/support/index.html
xviii
Important Information
Trademarks
• MultiPresenter is a trademark or registered trademark of NEC Display Solutions, Ltd. in Japan and
other countries.
• Apple, Mac, MacBook, and iMac are trademarks of Apple Inc. registered in the U.S. and other
countries.
• Microsoft, Windows, and PowerPoint are either a registered trademark or trademark of Microsoft
Corporation in the United States and/or other countries.
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trade-
marks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and
other countries.
• HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
• PJLink trademark and logo are trademarks applied for registration or are already registered in
Japan, the United States of America and other countries and areas.
• Wi-Fi® is a registered trademark of the Wi-Fi Alliance®. WPA™, WPA2™ are trademarks of the Wi-Fi
Alliance®.
• Blu-ray is a trademark of Blu-ray Disc Association
• CRESTRON and CRESTRON ROOMVIEW are trademarks or registered trademarks of Crestron
Electronics, Inc. in the United States and other countries.
• Extron and XTP are registered trademarks of RGB Systems, Inc. in the United States.
• Ethernet is either a registered trademark or trademark of Fuji Xerox Co., Ltd.
• Other product names and company logos mentioned in this user’s manual may be the trademarks
or registered trademarks of their respective holders.
• GPL/LGPL Software Licenses
The product includes software licensed under GNU General Public License (GPL), GNU Lesser
General Public License (LGPL), and others.
For more information on each software, see“readme.pdf”inside the“about GPL&LGPL”folder on
the supplied CD-ROM.
xix
1. Check the product overview, supplied items and part names
1-1. Introduction to the Projector
This section introduces you to your new projector and describes the features and controls.
General
•
Liquid crystal type high brightness/high resolution projector
Model name
P525UL
Brightness
5,000 lm
Resolution
Aspect ratio
16:10
WUXGA
(1920 × 1200 pixels)
WXGA
(1280 × 800 pixels)
P525WL
5,000 lm
16:10
•
•
A proprietary sealed structure that achieves highly dust-proof performance
Due to its excellent dust-proof performance, the projector is not equipped with a filter. Filter
replacement is therefore unnecessary.
Silent design utilizing a sealed structure
A silent design with no irritating fan noise even in a quiet conference room or classroom.
Light source · Brightness
•
•
•
A long-life laser diode is equipped in the light module
The product can be operated at low cost because the laser light source can be used for a long
time without requiring replacement or maintenance.
Brightness can be adjusted within a wide range
Unlike with ordinary light sources, the brightness can be adjusted from 30 to 100% in 1% incre-
ments.
[CONSTANT BRIGHTNESS] mode
Brightness normally decreases with use, but by selecting [CONSTANT BRIGHTNESS] mode, the
projector automatically controls the output from the light module according to the light module
used time for maintaining constant brightness.
Installation
•
360° installation and portrait projection
The projector can be installed at any angle from 0° to 360° in both the vertical and horizontal
direction. When installing the projector in a tilted position, use brackets of sufficient strength.
Portraits can also be projected with the projection screen tilted 90°. Be sure to assemble and
install a dedicated stand.
•
Lens shift mechanism for adjusting the position of the projected image easily
The position of the projected image is moved by turning the two dials on the projector cabinet
top, one for the vertical direction and another for the horizontal direction.
1
1. Check the product overview, supplied items and part names
Videos
•
•
•
•
Wide range of input terminals (HDMI × 2, HDBaseT, etc.)
The projector is equipped with a variety of input terminals: HDMI (× 2), Computer (analog),Video,
HDBaseT, etc. HDMI input terminal on this product supports HDCP. HDBaseT is a connection
standard for home appliances that is established by the HDBaseT Alliance.
Simultaneous display of 2 images (PIP)
With this projector, it is possible to project 2 images with a single projector, by displaying a
small sub-display within the main display. Furthermore, the sub-display display position can
be changed and the main display and sub-display images can be swapped.
[VIEWER] function to project still images saved in a USB memory
When you insert a commercially available USB memory containing the picture into the USB port
of the projector (Type A), the images on the USB can be projected by the unit. By doing this,
you can make a presentation without using a personal computer.
Seamless switch function for smoother screen changes when switching the signal
When the input connector is switched, the image displayed before switching is held so that that
the new image can be switched to without a break due to absence of a signal.
Network
•
Compatible with wired LAN / wireless LAN
Equipped with a LAN port (RJ-45), the projector can be connected to a wired LAN to transmit
images from a computer to this unit or to control this unit from the computer. In addition, when
a wireless LAN unit sold separately is attached to the unit, the unit can be connected to a wire-
less LAN.
•
•
CRESTRON ROOMVIEW and Extron XTP compatibility
The projector supports CRESTRON ROOMVIEW and Extron XTP, allowing multiple devices con-
nected in the network to be managed and controlled from a computer. Moreover, it enables to
output and control image via an Extron XTP transmitter connected with the projector.
Compatible with the MultiPresenter application
This projector is compatible with the NEC MultiPresenter application, so multi-screen projection
is possible via the network (wired LAN/wireless LAN).
Energy-saving
•
0.13 W (100-130 V AC)/0.19 W (200-240 V AC) in standby condition with energy saving
technology
Selecting [NORMAL] for [STANDBY MODE] from the menu can put the projector in power-saving
mode.
NORMAL: 0.13 W (100-130 V AC)/0.19 W (200-240 V AC)
NETWORK STANDBY: 1.4 W (100-130 V AC)/1.6 W (200-240 V AC)
2
1. Check the product overview, supplied items and part names
•
[ECO MODE] for low power consumption and [CARBON METER] display
The projector is equipped with a [ECO MODE] for reducing power consumption during use.
Furthermore, the power-saving effect when the [ECO MODE] is set is converted into the amount
of reductions of CO2 emissions and this is indicated on the confirmation message displayed
when the power is turned off and at [INFO.] on the on-screen menu ([CARBON METER]).
3
1. Check the product overview, supplied items and part names
1-2. What’s in the Box?
Make sure your box contains everything listed. If any pieces are missing, contact your dealer.
Please save the original box and packing materials if you ever need to ship your projector.
Projector
Remote control
Batteries (AAA × 2)
(7N901171)
Power cord
Computer cable (VGA)
Lens cap strap
(US: 7N080236/7N080242)
(EU: 7N080022/7N080028)
(7N520089)
NEC Projector CD-ROM
(7N952802)
•
•
Important Information
(7N8N9291)
Quick Setup Guide
(For North America: 7N8N9301)
(For Other countries than North America: 7N8N9301 and 7N8N9311)
Security Sticker
•
(Use this sticker when security password is set on.)
For North America only
•
Limited warranty
For customers in Europe:
You will find our current valid Guarantee Policy on our Web Site:
https://www.nec-display-solutions.com
4
1. Check the product overview, supplied items and part names
1-3. Part Names of the Projector
Front
1
6
7
8
9
2
3
4
5
10
11
12
1. Lens shift cover
11. Security chain opening
(→ page 23)
Attach an anti-theft device.
The security chain opening accepts security
wires or chains up to 0.18 inch/4.6 mm in
diameter.
2. Zoom Lever
(→ page 26)
3. Lens
12. Tilt Foot
4. Focus Ring
(→ page 27)
(→ page 25)
TIP:
•
5. Lens Cap
Security and theft protection lock compatible with
Kensington security cables/equipment. For products, visit
Kensington's website.
6. Indicators
(→ page 8, 140)
7. Remote Sensor
(→ page 14)
8. Monaural Speaker
9. Controls
(→ page 8)
10. Security Slot (
)
5
1. Check the product overview, supplied items and part names
Mounting the lens cap strap
1. Insert the tip of the strap into the lens cap
mount hole and pass the knot through.
Lens cap mount hole
2. Insert the knot into the strap mount hole
(large) on the bottom of the projector, then
press it into the narrow (small) hole.
6
1. Check the product overview, supplied items and part names
Rear
1
4
5
3
2
1. Terminal Panel
(→ page 9)
2. AC Input
Connect the supplied power cord’s three-
pin plug here, and plug the other end into
an active wall outlet.
(→ page 16)
3. Intake Vent
4. Remote Sensor
(→ page 14)
5. Exhaust Vent
7
1. Check the product overview, supplied items and part names
Controls/Indicators
4 3 2
1
7
5
6
8
9
1.
(POWER) Button
(→ page 18, 31)
2. POWER Indicator
(→ page 16, 18, 31, 140)
3. STATUS Indicator
(→ page 140)
4. LIGHT Indicator
(→ page 140)
5. INPUT Button
(→ page 20)
6. MENU Button
(→ page 47)
7. EXIT Button
(→ page 47)
8. ▲▼◀▶ / Volume Buttons ◀▶ / Keystone Button ▼
(→ page 28, 30, 47)
9. ENTER Button
(→ page 47)
8
1. Check the product overview, supplied items and part names
Terminal Panel Features
10
8
3
1
2
6
7
4 5
9
1. HDMI 1 IN Terminal (Type A)
8. USB Port (Type A)
(→ page 81, 83, 85)
Connect the USB memory. When picture
data is saved in a USB memory, the picture
can be projected with the [VIEWER] of the
projector.
2. HDMI 2 IN Terminal (Type A)
(→ page 81, 83, 85)
3. COMPUTER IN/ Component Input Termi-
nal (Mini D-Sub 15 Pin)
(→ page 95)
In addition, a 5V/2.0 A power supply can be
supplied for expansion use.
(→ page 81, 84)
4. AUDIO IN Mini Jack (Stereo Mini)
9. PC CONTROL Port (D-Sub 9 Pin)
(→ page 81, 84)
Use this port to connect a PC or control
system. This enables you to control the pro-
jector using serial communication protocol.
If you are writing your own program, typical
PC control codes are on page 133.
5. AUDIO OUT Mini Jack (Stereo Mini)
Audio signal of the image projected from
the projector is output.
When audio equipment is connected, the
projector speaker is disabled.
10. Wireless LAN cover (
)
6. Ethernet/HDBaseT Port (RJ-45)
There are two terminals behind the cover.
(→ page 90)
•
•
USB (Wireless LAN) Port
(→ page 88)
SERVICE Port (USB Type B)
(for service purpose only)
7. LAN Port (RJ-45)
(→ page 86)
9
1. Check the product overview, supplied items and part names
1-4. Part Names of the Remote Control
1. Infrared Transmitter
1
2
3
4
(→ page 14)
2. POWER ON Button
(→ page 18)
6
7
5
8
3. POWER STANDBY Button
(→ page 31)
10 4. SOURCE Button
9
(→ page 20)
11
5. HDMI1 Button
(→ page 20)
6. HDMI2 Button
(→ page 20)
7. HDBaseT Button
(→ page 20)
8. DisplayPort Button
(This button does not work in this series of projec-
tors)
9. COMPUTER Button
(→ page 20)
10. AUTO ADJ. Button
(→ page 30)
11. VIDEO Button
(This button does not work in this series of projec-
tors)
10
1. Check the product overview, supplied items and part names
12. USB-A Button
(→ page 20, 96)
13. USB-B Button
16
14
(This button does not work in this series of projec-
tors)
12
13
14. APPS Button
17
18
15
19
(→ page 20, 107)
15. ID SET Button
21
22
(→ page 70)
20
16. Numeric Keypad Button/CLEAR Button
(→ page 70)
17. PIP Button
(→ page 44)
18. FREEZE Button
(→ page 33)
19. AV-MUTE Button
(→ page 33)
20. MENU Button
(→ page 47)
21. EXIT Button
(→ page 47)
22. ▲▼◀▶ Button
(→ page 34, 47)
11
1. Check the product overview, supplied items and part names
23. ENTER Button
(→ page 47)
24. D-ZOOM (+)(−) Button
(→ page 34)
25. MOUSE L-CLICK Button
(This button does not work in this series of projec-
tors)
26. MOUSE R-CLICK Button
(This button does not work in this series of projec-
tors)
23
24
27. PAGE ▽/△ Button
27
(→ page 100, 102)
29
26
30
28. ECO Button
(→ page 35)
25
28
29. KEYSTONE Button
(→ page 28, 37)
31
30. PICTURE Button
34
32
33
(→ page 54, 57)
31. VOL. (+)(−) Button
(→ page 30)
32. ASPECT Button
(→ page 60)
33. FOCUS/ZOOM Button
(This button does not work in this series of projec-
tors)
34. HELP Button
(→ page 78)
12
1. Check the product overview, supplied items and part names
Battery Installation
1. Press firmly and slide the battery cover off.
OPEN
2. Install new batteries (AAA). Ensure that you have
the batteries’ polarity (+/−) aligned correctly.
3. Slip the cover back over the batteries until it snaps
into place. Do not mix different types of batteries or
new and old batteries.
OPEN
Remote Control Precautions
•
•
•
•
•
•
•
•
•
Handle the remote control carefully.
If the remote control gets wet, wipe it dry immediately.
Avoid excessive heat and humidity.
Do not short, heat, or take apart batteries.
Do not throw batteries into fire.
If you will not be using the remote control for a long time, remove the batteries.
Ensure that you have the batteries’polarity (+/−) aligned correctly.
Do not use new and old batteries together, or use different types of batteries together.
Dispose of used batteries according to your local regulations.
13
1. Check the product overview, supplied items and part names
Operating Range for Wireless Remote Control
30°
30°
30°
30°
Remote control
23 feet/7 m
23 feet/7 m
Remote sensor on
projector cabinet
30°
30°
30°
30°
•
•
The infrared signal operates by line-of-sight up to a distance of about 23 feet/7 m and within a
60-degree angle of the remote sensor on the projector cabinet.
The projector will not respond if there are objects between the remote control and the sensor,
or if strong light falls on the sensor. Weak batteries will also prevent the remote control from
properly operating the projector.
14
2. Projecting an Image (Basic Operation)
This section describes how to turn on the projector and to project a picture onto the screen.
2-1. Flow of Projecting an Image
Step 1
•
Connecting your computer / Connecting the power cord (→ page 16)
Step 2
•
Turning on the projector (→ page 18)
Step 3
•
Selecting a source (→ page 20)
Step 4
•
Adjusting the picture size and position (→ page 22)
Correcting keystone distortion [KEYSTONE] (→ page 28)
•
Step 5
•
Adjusting a picture and sound
-
-
Optimizing a computer signal automatically (→ page 30)
Turning up or down volume (→ page 30)
Step 6
•
Making a presentation
Step 7
•
Turning off the projector (→ page 31)
Step 8
•
When Moving the Projector (→ page 32)
15
2. Projecting an Image (Basic Operation)
2-2. Connecting Your Computer/Connecting the Power Cord
1. Connect your computer to the projector.
This section will show you a basic connection to a computer. For information about other con-
nections, see “5. Making Connections”on page 81.
Connect the computer cable (VGA) between the projector’s COMPUTER IN terminal and the
computer’s port (mini D-Sub 15 Pin). Turn two thumb screws of both terminals to fix the com-
puter cable (VGA).
2. Connect the supplied power cord to the projector.
First connect the supplied power cord’s three-pin plug to the AC IN terminal of the projector,
and then connect another plug of the supplied power cord directly in the wall outlet. Do not
use any plug converter.
CAUTION:
This equipment is designed to be used in the condition of the power cord connected to
earth. If the power cord is not connected to the earth, it may cause electric shock. Please
make sure the power cord is earthed properly.
When the power cord is connected, the POWER indicator of this projector flashes orange and
the unit goes into the standby mode. (In the state, [STANDBY MODE] is [NORMAL].)
COMPUTER IN
Computer cable (VGA)
(supplied)
Make sure that the prongs are fully inserted
into both the AC IN and the wall outlet.
To wall outlet
16
2. Projecting an Image (Basic Operation)
CAUTION:
Parts of the projector may become temporarily heated if the projector is turned off with the
POWER button. Be careful to handle the projector.
17
2. Projecting an Image (Basic Operation)
2-3. Turning on the Projector
WARNING
The projector produces a strong light. When turning on the power, make sure no one within
projection range is looking at the lens.
1. Remove the lens cap.
With the lens cap’s stopper pressed up, pull
forward and off.
Stopper
2. Press the (POWER) button on the projec-
tor cabinet or the POWER ON button on the
remote control.
The POWER indicator lights blue and the image
is projected on the screen.
TIP:
Standby
Blinking
Power On
•
When the message “PROJECTOR IS LOCKED ! ENTER YOUR
KEYWORD.”is displayed, it means that the [SECURITY] feature
is turned on. (→ page 42)
After you turn on your projector, ensure that the
computer or video source is turned on.
Blinking orange light
Blinking blue Steady blue light
light
NOTE:
•
When no input signal is present, the no-signal guidance is dis-
played (factory menu setting).
18
2. Projecting an Image (Basic Operation)
Note on Startup screen (Menu Language Select screen)
When you first turn on the projector, you will get the Startup menu. This menu gives you the op-
portunity to select one of the 30 menu languages.
To select a menu language, follow these steps:
1. Use the ▲, ▼, ◀ or ▶ button to select one of
the 30 languages from the menu.
2. Press the ENTER button to execute the selec-
tion.
After this has been done, you can proceed to
the menu operation.
If you want, you can select the menu language
later.
(→ [LANGUAGE] on page 50 and 65)
NOTE:
•
If one of the following things happens, the projector will not turn on.
-
If the internal temperature of the projector is too high, the projector detects abnormal high temperature. In this condition the
projector will not turn on to protect the internal system. If this happens, wait for the projector’s internal components to cool
down.
-
If the STATUS indicator lights orange with the power button pressed, it means that the [CONTROL PANEL LOCK] is turned on.
Cancel the lock by turning it off. (→ page 69)
•
While the POWER indicator is blinking blue in short cycles, the power cannot be turned off by using the power button.
19
2. Projecting an Image (Basic Operation)
2-4. Selecting a Source
Selecting the computer or video source
NOTE:
•
Turn on the computer or video source equipment connected to the projector.
Detecting the Signal Automatically
Press the INPUT button once. The projector will
search for the available input source and display it.
The input source will change as follows:
[HDMI1] → [HDMI2] → [COMPUTER] → [HDBaseT]
→ [USB-A] → [LAN]
•
With the [INPUT] screen displayed, you can press
the INPUT button a few times to select the input
source.
•
Press the SOURCE button when using the re-
mote control.
TIP:
If no input signal is present, the input will be skipped.
•
Using the Remote Control
Press any one of the HDMI1, HDMI2, HDBaseT,
COMPUTER, USB-A, or APPS buttons.
20
2. Projecting an Image (Basic Operation)
Selecting Default Source
You can so that it will be displayed each time the projector is turned on.
1. Press the MENU button.
The menu will be displayed.
2. Press the ▶ button twice to select [SETUP] and the ▼ button or the ENTER button to select
[GENERAL].
3. Press the
▶
button four times to select [OPTIONS(2)].
4. Press the ▼ button five times to select [DEFAULT INPUT SELECT] and press the ENTER
button.
The [DEFAULT INPUT SELECT] screen will be displayed.
5. Select a source as the default source, and press the ENTER button.
6. Press the EXIT button a few times to close the menu.
7. Restart the projector.
The source you selected in step 5 will be projected.
TIP:
•
•
When the projector and computer are connected and the projector is in standby, it is possible to turn on the projector’s power and
project the computer’s screen automatically by detecting the computer signals or HDMI signals issued from the computer.
([AUTO POWER ON] → page 75)
On Windows 7, a combination of the Windows and P keys allows you to set up external display easily and quickly.
21
2. Projecting an Image (Basic Operation)
2-5. Adjusting the Picture Size and Position
Use the lens shift dial, the adjustable tilt foot lever, the zoom lever/zoom ring and the focus ring to
adjust the picture size and position.
In this chapter drawings and cables are omitted for clarity.
Adjusting the projected image’s vertical and Adjusting the focus [Focus ring]
horizontal position [Lens shift]
(→ page 23)
(→ page 25)
Finely adjusting the size of an image [Zoom Adjusting the projected image’s height and
lever]
horizontal tilt [Tilt foot]
(→ page 26)
(→ page 27)
Correcting the keystone distortion [Keystone]
(→ page 28)
22
2. Projecting an Image (Basic Operation)
Adjusting the vertical position of a projected image (Lens shift)
CAUTION
Perform the adjustment from behind or from the side of the projector. Adjusting from the front
could expose your eyes to strong light which could injure them.
1. Open the lens shift cover.
Open with the cover’s stopper pushed forward.
•
The lens shift cover cannot be removed.
Stopper
2. Turn the lens shift dials clockwise or counterclockwise.
Vertical dial
Turn this clockwise or counterclockwise to adjust the projection position in the vertical direction.
Horizontal dial
Turn this clockwise or counterclockwise to adjust the projection position in the horizontal
direction.
Lens shift dial
(Horizontal)
Lens shift dial
(Vertical)
Rightward
Leftward
Upward
Downward
23
2. Projecting an Image (Basic Operation)
NOTE:
•
The dials can be turned more than one full turn, but the projection position cannot be moved more than the range indicated on
the following page. Do not force to turn the dials. Doing so may damage the dials.
•
•
If the lens is shifted to the maximum in the diagonal direction, the edges of the screen will be dark or shaded.
The vertical shift adjustment must be finished with an image shifted upward. If you finish the vertical shift adjustment with an
image shifted down, the zoom/focus adjustments or strong shaking may cause a projected image to slightly shift down.
3. Close the lens shift cover.
Insert the cover’s 2 (two) hooks into the grooves
in the projector, then close the cover.
Hook
Groove
TIP:
•
•
The diagram below shows the lens shift adjustment range ([ORIENTATION]: [DESKTOP FRONT]).
For the lens shift adjustment range regarding the [CEILING FRONT] projection, see page 124.
29%H
100%H
29%H
Width of projected
image
60%V
100%V
Height of pro-
jected image
Description of symbols: V indicates vertical (height of the projected image), H indicates horizontal (width of the projected image).
24
2. Projecting an Image (Basic Operation)
Focus
Use the FOCUS ring to obtain the best focus.
Focus ring
NOTE:
•
Recommend to perform the focus adjustment after leaving the projector under the state the TEST PATTERN has been projected for
over 30 minutes.
Please refer to page 71 about the TEST PATTERN.
25
2. Projecting an Image (Basic Operation)
Zoom
Turn the zoom lever clockwise and counterclockwise.
Zoom lever
26
2. Projecting an Image (Basic Operation)
Adjusting the tilt (Tilt foot)
Adjusting the left and right tilt.
1. Turn the left and right tilt feet to adjust.
The tilt feet lengthen and shorten when turned.
The height of the projected image is adjusted
by turning the left and right tilt feet.
If the projected image is tilted, turn one of the
tilt feet to adjust the image so that it is level.
•
If the projected image is distorted, see“2-6
Correcting Keystone Distortion [KEYSTONE]”
(→ page 28).
•
•
The tilt feet can be lengthened by a maxi-
mum of 15 mm/0.6".
The tilt feet can be used to tilt the projector
by a maximum of 2°.
Tilt foot
Up
Down
NOTE:
•
Do not lengthen the tilt feet any more than 15 mm/0.6". Doing so will make the tilt feet’s mount section unstable and could cause
the tilt feet to come off the projector.
•
Do not use the tilt feet for any purpose other than adjusting the projector’s projection angle.
Handling the tilt feet improperly, such as carrying the projector by grasping the tilt feet or hooking it onto a wall using the tilt feet,
could damage the projector.
27
2. Projecting an Image (Basic Operation)
2-6. Correcting Keystone Distortion [KEYSTONE]
When the projector is not exactly perpendicular to the screen, keystone distortion occurs. For cor-
recting this distortion, you can use the“Keystone”function, a digital technology that can adjust for
keystone-type distortion, resulting in a crisp, square image.
The following procedure explains how to use the [KEYSTONE] screen from the menu to correct
trapezoidal distortions when the projector is placed diagonally to the screen.
Before performing KEYSTONE correction
The [KEYSTONE] correction has four features, [KEYSTONE HORIZONTAL], [KEYSTONE VERTICAL],
[PINCUSHION LEFT/RIGHT], [PINCUSHION TOP/BOTTOM], and [CORNERSTONE]. If the value of
either [CORNERSTONE] or [PINCUSHION] has corrected, [KEYSTONE HORIZONTAL] and [KEYSTONE
VERTICAL] are disabled. In this case, RESET the corrected values and restart to correct distortion.
1. Press the ▼button on the projector cabinet.
The [KEYSTONE] screen will be displayed on
the screen.
•
Press the KEYSTONE button when using
the remote control.
•
•
•
See page 39 for [PINCUSHION].
See page 37 for [CORNERSTONE].
See page 29 for [RESET].
Projected area
2. Press the ▼ button to select [KEYSTONE
VERTICAL] and then use the ◀ or ▶ so that
the left and right sides of the projected
image are parallel.
Screen frame
•
Adjust the vertical keystone distortion.
3. Align the left (or right) side of the screen
with the left (or right) side of the projected
image.
•
Use the shorter side of the projected im-
age as the base.
•
In the right example, use the left side as
the base.
Align left side
28
2. Projecting an Image (Basic Operation)
4. Press the ▲ button to select [KEYSTONE
HORIZONTAL] and then use the ◀ or ▶ so
that the top and bottom sides of the pro-
jected image are parallel.
•
Adjust the horizontal keystone distortion.
5. Repeat steps 2 and 4 to correct keystone
distortion.
6. After completing Keystone correction,
press the EXIT button.
The Keystone screen will disappear.
•
To perform Keystone correction again,
press the ▼button to display the Keystone
screen and repeat above steps 1 to 6.
To return the keystone adjustments to default:
1. Press the ▼ button to select [RESET] and press the ENTER button.
2. Press the ◀ or ▶ button to select [YES] and press the ENTER button.
The adjustments will be reset.
All the adjustments for all the five items will be reset at the same time.
•
The KEYSTONE feature can cause an image to be slightly blurred because the correction is
made electronically.
29
2. Projecting an Image (Basic Operation)
2-7. Optimizing Computer Signal Automatically
Adjusting the Image Using Auto Adjust
Optimizing a computer image automatically. (COMPUTER)
Press the AUTO ADJ. button on the remote control
to optimize a computer image automatically.
This adjustment may be necessary when you con-
nect your computer for the first time.
Poor picture
Normal picture
NOTE:
Some signals may take time to display or may not be displayed correctly.
•
If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and [PHASE]
manually. (→ page 58, 59)
2-8. Turning Up or Down Volume
Sound level from the speaker or audio output can be adjusted.
When no menus appear, the ◀ and ▶ buttons on
the projector cabinet work as a volume control.
•
On the remote control, press the VOL. (+) or (−)
button.
NOTE:
•
Volume control is not available with the ◀or ▶button when an
image is magnified by using the D-ZOOM (+) button, when the
menu is displayed, or when the LAN is displayed.
Increase volume
Decrease volume
TIP:
The [BEEP] sound volume cannot be adjusted.To turn off the [BEEP]
•
sound, from the menu, select [SETUP] →[OPTIONS(1)] →[BEEP]
→ [OFF].
30
2. Projecting an Image (Basic Operation)
2-9. Turning off the Projector
To turn off the projector:
1. First, press the
(POWER) button on the
projector cabinet or the STANDBY button on
the remote control.
The confirmation message will be displayed.
•
The confirmation message displayed when
the power is turned off indicates the amount
of CO2 reduction this session (→ page 36).
2. Secondly, press the ENTER button or press
Power On
Standby
the
(POWER) or the STANDBY button
again.
When the light source turns off, the power turns
off too (standby mode).
Steady blue light
Blinking orange light
When the projector goes into the standby
mode, the POWER indicator of the unit flashes
orange. (In the state, [STANDBY MODE] is
[NORMAL].)
3. Mount the lens cap.
Insert the cap’s 2 (two) hooks into the grooves
of the projector, then press at the bottom of the
lens cap.The stopper is secured to the projector.
Hook
Stopper
31
2. Projecting an Image (Basic Operation)
CAUTION:
Parts of the projector may become temporarily heated if the projector is turned off with the
POWER button.
Be careful to handle the projector.
NOTE:
•
•
•
While the POWER indicator is blinking blue in short cycles, the power cannot be turned off.
You cannot turn off the power for 60 seconds immediately after turning it on and displaying an image.
Do not unplug the power cord from the projector or from the power outlet while an image is being projected. Doing so could
deteriorate the projector’s AC IN terminal or the power plug’s contact. To turn off the AC power while an image is being projected,
use the power strip’s switch, the breaker, etc.
•
Do not disconnect the AC power supply to the projector within 10 seconds of making adjustment or setting changes and closing
the menu. Doing so can cause loss of adjustments and settings.
2-10. When Moving the Projector
Preparation: Make sure that the projector is turned off.
1. Unplug the power cord.
2. Disconnect any other cables.
•
Remove the USB memory if it is inserted into the projector.
32
3. Convenient Features
3-1. Turning off the Image and Sound
Press the AV-MUTE button to turn off the image
and sound for a short period of time. Press again
to restore the image and sound.
NOTE:
•
Even though the image is turned off, the menu still remains on the screen.
3-2. Freezing a Picture
Press the FREEZE button. If the image of a DVD
player, etc., is being projected, the video switches
to a still image. Press the FREEZE button again to
resume the video.
NOTE:
•
The image is frozen but the original video is still playing back.
33
3. Convenient Features
3-3. Magnifying a Picture
You can enlarge the picture up to four times.
NOTE:
•
The maximum magnification may be less than four times depending on the signal.
To do so:
1. Press the D-ZOOM (+) button to magnify the picture.
To move the magnified image, use the ▲,▼,◀ or ▶ button.
2. Press the ▲▼◀▶ button.
The area of the magnified image will be moved
3. Press the D-ZOOM (−) button.
Each time the D-ZOOM (−) button is pressed, the image is reduced.
NOTE:
•
•
The image will be magnified or demagnified at the center of the screen.
Displaying the menu will cancel the current magnification.
34
3. Convenient Features
3-4. Changing Eco Mode/Checking Energy-Saving Effect
Using Eco Mode [ECO MODE]
Two eco modes can be selected according to the purpose of use for the projector.
[ECO MODE]
Icon at the bottom of
the menu
Description
Status of LIGHT indicator
[OFF]
100% brightness
Steady green
The screen will be brightly lit.
light
[ECO]
Brightness will be at about 60%.
The cooling fan will also slow down accordingly.
Lower power consumption
Blinking green
light
[LONG LIFE]
Brightness will be at about 50%.
This setting accords priority to prolonging the
life of the light module.
To turn on the [ECO MODE], do the following:
1. Press the ECO Button on the remote control
to display [ECO MODE] screen.
2. Use the ▼▲ buttons to select, then press
the ENTER button.
The [ECO MODE] selection screen turns off and
the projector switches to the selected mode.
NOTE:
•
The [ECO MODE] can be changed by using the menu.
Select [SETUP] → [GENERAL] → [LIGHT MODE] → [ECO MODE].
The [LIGHT HOURS USED] can be checked in [USAGE TIME]. Select [INFO.] → [USAGE TIME].
After a lapse of 1 minute from when the projector displays no-signal guidance, a blue, black or logo screen, the projector goes into
[LONG LIFE] automatically. The projector will return to its original setting once a signal is accepted.
•
•
•
If the projector inside temperature becomes high caused on the high room temperature, the projector may decrease the brightness
temporarily for protecting itself. This is a protective function called [FORCED ECO MODE]. When the projector is in the [FORCED ECO
MODE], the thermometer symbol [ ] is indicated at the right bottom of the screen. When the projector inside temperature goes
down by cooling the room, the [FORCED ECO MODE] will be released and the projector will be back to the original setting state.
During the [FORCED ECO MODE], it disables to change the state by changing the setting of the [ECO MODE].
35
3. Convenient Features
Checking Energy-Saving Effect [CARBON METER]
This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projec-
tor’s [ECO MODE] is set to [ECO] or [LONG LIFE]. This feature is called as [CARBON METER].
There are two messages: [TOTAL CARBON SAVINGS] and [CARBON SAVINGS-SESSION]. The [TOTAL
CARBON SAVINGS] message shows the total amount of CO2 emission reduction from the time of
shipment up to now. You can check the information on [USAGE TIME] from [INFO.] of the menu.
(→ page 78)
The [CARBON SAVINGS-SESSION] message shows the amount of CO2 emission reduction between
the time of changing to ECO MODE immediately after the time of power-on and the time of power-
off. The [CARBON SAVINGS-SESSION] message will be displayed in the [POWER OFF / AREYOU SURE
?] message at the time of power-off.
TIP:
•
The formula as shown below is used to calculate the amount of CO2 emission reduction.
Amount of CO2 emission reduction = (Power consumption in [OFF] for [ECO MODE] − Power consumption in [ECO]/[LONG LIFE] for
[ECO MODE]) × CO2 conversion factor.
*
Calculation for amount of CO2 emission reduction is based on an OECD publication“CO2 Emissions from Fuel Combustion, 2008
Edition”.
•
•
The [TOTAL CARBON SAVINGS] is calculated based on savings recorded in 15 minutes intervals.
This formula will not apply to the power consumption which is not affected by whether [ECO MODE] is turned on or off.
36
3. Convenient Features
3-5. Using 4-Point Corner to Correct Keystone Distortion
[CORNERSTONE]
Use the [CORNERSTONE] and [PINCUSHION] features to correct keystone (trapezoidal) distortion
to make the top or bottom and the left or right side of the screen longer or shorter so that the
projected image is rectangular.
Before performing correction
The [KEYSTONE] correction has features, [KEYSTONE HORIZONTAL], [KEYSTONE VERTICAL], [PIN-
CUSHION LEFT/RIGHT], [PINCUSHION TOP/BOTTOM], and [CORNERSTONE]. If the value of either
[CORNERSTONE] or [PINCUSHION] has corrected, [KEYSTONE HORIZONTAL] and [KEYSTONE VERTI-
CAL] are disabled. In this case, RESET the corrected values and restart to correct distortion
Cornerstone
1. Press the ▼button with no menu displayed.
The [KEYSTONE] screen will be displayed.
•
Press the KEYSTONE button when using
the remote control.
2. Press the ▼ button to select [CORNER-
STONE] and press the ENTER button.
The [CORNERSTONE] screen will be displayed.
*
The drawing shows the upper left icon (
is selected.
)
Projected image
3. Project an image so that the screen is
smaller than the area of the raster.
4. Pick up any one of the corners and align
the corner of the image with a corner of the
screen.
*
The drawing shows the upper right corner.
37
3. Convenient Features
5. Use the ▲▼◀▶ button to select one icon
(▲) which points in the direction you wish
to move the projected image frame.
TIP:
•
If either [CORNERSTONE] or [PINCUSHION] is adjusted, the
options [KEYSTONE VERTICAL] and [KEYSTONE HORIZON-
TAL] become unavailable. In this case, RESET the corrected
values and restart to correct distortion.
6. Press the ENTER button.
7. Use the ▲▼◀▶button to move the project-
ed image frame as shown on the example.
8. Press the ENTER button.
9. Use the ▲▼◀▶ button to select another
icon which points in the direction.
On the Cornerstone adjustment screen, select
[EXIT] or press the EXIT button on the remote
control.
The confirmation screen is displayed.
10. Press the ◀ or ▶ button to highlight the
[OK] and press the ENTER button.
This completes the Cornerstone correction.
Selecting [CANCEL] will return to the adjustment screen without saving changes (Step 3).
Selecting [RESET] will return to the factory default.
Selecting [UNDO] will exit without saving changes.
38
3. Convenient Features
Pincushion
By this feature, it enables to adjust left and right side or top and bottom side independently for
reforming pincushion distortion.
1. Press the ▼button with no menu displayed.
The [KEYSTONE] screen will be displayed.
•
Press the KEYSTONE button when using
the remote control.
2. Press the ▼or ▲button to select [PINCUSH-
ION LEFT/RIGHT] or [PINCUSHION TOP/
BOTTOM].
3. Press the ◀ or ▶ button to correct distor-
tion.
NOTE:
•
The [PINCUSHION LEFT/RIGHT] or [PINCUSHION TOP/BOT-
TOM] item is not available when [KEYSTONE HORIZONTAL],
[KEYSTONE VERTICAL] or [CORNERSTONE] is activated.
Before performing correction, set the lens shift to the
center position.
•
4. Press the EXIT when [PINCUSHION] adjust-
ment is completed.
NOTE:
•
•
Even when the projector is turned on, the last used correction values are applied.
[PINCUSHION] and [CORNERSTONE] corrections can cause the image to be slightly blurred because the correction is made electroni-
cally.
39
3. Convenient Features
Reset the keystone and pincushion adjustment to the default value
1. Press the ▼ button with no menu displayed.
ON the displayed [KEYSTONE] menu, set the cursor at [RESET] using the ▼ button and press
ENTER button.
•
Confirmation message is displayed on.
2. Move the cursor onto [YES] using either ◀ or ▶ button and then press the ENTER.
NOTE:
•
All adjusted values set in the [KEYSTONE] adjustment are reset to initial values
40
3. Convenient Features
3-6. Preventing the Unauthorized Use of the Projector [SECURITY]
A keyword can be set for your projector using the Menu to avoid operation by an unauthorized
user. When a keyword is set, turning on the projector will display the Keyword input screen. Unless
the correct keyword is entered, the projector cannot project an image.
•
The [SECURITY] setting cannot be cancelled by using the [RESET] of the menu.
To enable the Security function:
1. Press the MENU button.
The menu will be displayed.
2. Press the ▶ button twice to select [SETUP] and press the ▼ button or the ENTER button
to select [GENERAL].
3. Press the ▶ button to select [INSTALLATION].
4. Press the ▼ button three times to select [SECURITY] and press the ENTER button.
The [OFF/ON] menu will be displayed.
5. Press the ▼ button to select [ON] and press the ENTER button.
The [SECURITY KEYWORD] screen will be displayed.
6. Type in a combination of the four ▲▼◀▶ buttons and press the ENTER button.
NOTE:
•
A keyword must be 4 to 10 digits in length.
The [CONFIRM KEYWORD] screen will be displayed.
41
3. Convenient Features
7. Type in the same combination of ▲▼◀▶ buttons and press the ENTER button.
The confirmation screen will be displayed.
8. Select [YES] and press the ENTER button.
The [SECURITY] function has been enabled.
To turn on the projector when [SECURITY] is enabled:
1. Press the POWER button.
The projector will be turned on and display a message to the effect that the projector is locked.
2. Press the MENU button.
3. Type in the correct keyword and press the ENTER button. The projector will display an
image.
NOTE:
•
The security disable mode is maintained until the main power is turned off or unplugging the power cord.
42
3. Convenient Features
To disable the [SECURITY] function:
1. Press the MENU button.
The menu will be displayed.
2. Select [SETUP] → [INSTALLATION] → [SECURITY] and press the ENTER button.
The [OFF/ON] menu will be displayed.
3. Select [OFF] and press the ENTER button.
The [SECURITY KEYWORD] screen will be displayed.
4. Type in your keyword and press the ENTER button.
When the correct keyword is entered, the [SECURITY] function will be disabled.
NOTE:
•
If you forget your keyword, contact your dealer. Your dealer will provide you with your keyword in exchange for your request code.
Your request code is displayed in the Keyword Confirmation screen. In this example [K992-45L8-JNGJ-4XU9-1YAT-EEA2] is a request
code.
43
3. Convenient Features
3-7. Displaying Two Pictures at the Same Time
The projector has a feature that allows you to view two different signals simultaneously.
The projection video in the first screen display is known as the main display while the projection
video that is called out subsequently is known as the sub-display. A small sub-display is displayed
inside the main display.
Main Display
Sub-Display
Input terminals that can be used for the main display and sub-display.
The main display and sub-display can provide the following input terminals.
Sub-Display
HDMI1
HDMI2
No
HDBaseT
No
No
COMPUTER
LAN
No
No
No
No
USB-A
No
No
No
No
HDMI1
HDMI2
HDBaseT
COMPUTER
LAN
Yes
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
Main Display
Yes
Yes
No
Yes
No
No
USB-A
No
NOTE:
•
Some signals may not appear depending on the resolution.
44
3. Convenient Features
Projecting two screens
1. Press the PIP button on the remote control.
This displays the [PIP] screen in the on-screen menu.
2. Select [SUB INPUT] using the ▼/▲ buttons, and press the ENTER button.
This displays the [SUB INPUT] screen.
3. Select the input signal using the ▼/▲ buttons, and press the ENTER button.
The image of the selected signal is displayed in the sub-display.
•
When the signal name is displayed in grey, this means that it cannot be selected.
4. Press the MENU button.
The on-screen menu will disappear.
5. When returning to single screen, display the [PIP] screen one more time and select [OFF]
in the [SUB INPUT] screen of the Step 3.
TIP:
•
During dual-screen projection, if the selected input is not supported by the sub-screen, the sub-screen will appear as a blue or
black screen.
•
The sub-display can be set up and adjusted as follows. (→ page 63)
-
-
Select whether to display the sub-display at the top right, top left, bottom right or bottom left of the screen (the size of the
sub-display can be selected and the position can be fine-tuned)
Switch the main display with the sub-display
45
3. Convenient Features
Restrictions
• The following functions are invalid when projecting 2 screens.
- DYNAMIC CONTRAST
- TEST PATTERN
- Video magnification / compression using the partial D-ZOOM +/− buttons.
- Video pause (FREEZE)
• The following operations are enabled only for the main display.
- Audio-visual adjustments
• The following operations are enabled for both the main display and sub-display.These operations
cannot be applied individually.
- Momentary deletion of video / audio (AV-MUTE)
46
4. Using On-Screen Menu
4-1. Using the Menus
NOTE:
•
The on-screen menu may not be displayed correctly while interlaced motion video image is projected.
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
NOTE:
•
The commands such as ENTER, EXIT, ▲▼, ◀▶ in the bottom show available buttons for your operation.
2. Press the ◀▶ buttons on the remote control or the projector cabinet to display the sub-
menu.
3. Press the ENTER button on the remote control or the projector cabinet to highlight the
top item or the first tab.
4. Use the ▲▼ buttons on the remote control or the projector cabinet to select the item you
want to adjust or set.
You can use the ◀▶ buttons on the remote control or the projector cabinet to select the tab
you want.
5. Press the ENTER button on the remote control or the projector cabinet to display the
submenu window.
6. Adjust the level or turn the selected item on or off by using the ▲▼◀▶ buttons on the
remote control or the projector cabinet.
Changes are stored until adjusted again.
7. Repeat steps 2–6 to adjust an additional item, or press the EXIT button on the remote
control or the projector cabinet to quit the menu display.
NOTE:
•
When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings.
8. Press the MENU button to close the menu.
To return to the previous menu, press the EXIT button.
47
4. Using On-Screen Menu
Menu Elements
Tab
Slide bar
Solid triangle
Available buttons
Source
Highlight
Radio button
Wireless symbol
Menu mode
ECO mode symbol
Off Timer remaining time
Key Lock symbol
Thermometer symbol
Menu windows or dialog boxes typically have the following elements:
Highlight
Indicates the selected menu or item.
Solid triangle
Tab
Radio button
Source
Indicates further choices are available. A highlighted triangle indicates the item is active.
Indicates a group of features in a dialog box. Selecting on any tab brings its page to the front.
Use this round button to select an option in a dialog box.
Indicates the currently selected source.
Off Timer remaining time
Slide bar
Indicates the remaining countdown time when the [OFF TIMER] is preset.
Indicates settings or the direction of adjustment.
ECO mode symbol
Key Lock symbol
Thermometer symbol
Wireless symbol
Menu mode
Indicates [ECO MODE] is set.
Indicates the [CONTROL PANEL LOCK] is enabled.
Indicates the projector is in the state of the [FORCED ECO MODE].
Indicate the wireless LAN connection is enabled.
Indicate the [ADVANCED] menu or [BASIC] menu.
48
4. Using On-Screen Menu
4-2. List of Menu Items
Some menu items are not available depending on the input source. The below listed menu items
are on the advanced menu. The mark (B) is added to the items on the basic menu.
Shaded characters ( ) represent default settings.
Menu Item
Options
INPUT
HDMI1
HDMI2
COMPUTER
HDBaseT
USB-A
(B)
(B)
(B)
(B)
(B)
(B)
LAN
ADJUST
PICTURE
PRESET
1–7
DETAIL SETTINGS GENERAL
REFERENCE
HIGH-BRIGHT, PRESENTATION, VIDEO, MOVIE, GRAPHIC, sRGB,
DICOM SIM.
GAMMA CORRECTION
SCREEN SIZE
DYNAMIC, NATURAL, BLACK DETAIL
LARGE, MEDIUM, SMALL
COLOR TEMPERATURE
DYNAMIC CONTRAST
IMAGE MODE
OFF, ON
STILL, MOVIE
COLOR ENHANCEMENT
CONTRAST R
OFF, LOW, MEDIUM, HIGH
WHITE
BALANCE
CONTRAST G
CONTRAST B
BRIGHTNESS R
BRIGHTNESS G
BRIGHTNESS B
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
(B)
(B)
(B)
(B)
(B)
(B)
HUE
RESET
IMAGE OPTIONS
CLOCK
PHASE
HORIZONTAL
VERTICAL
OVERSCAN
ASPECT RATIO
VOLUME
AUTO, 0[%], 5[%], 10[%]
AUTO, 4:3, 16:9, 15:9, 16:10, LETTERBOX, NATIVE
AUDIO
(B)
49
4. Using On-Screen Menu
Menu Item
KEYSTONE
Options
SETUP
GENERAL
(B) KEYSTONE HORIZONTAL
KEYSTONE VERTICAL
PINCUSHION LEFT/RIGHT
PINCUSHION TOP/BOTTOM
CORNERSTONE
RESET
PIP
(B) SUB INPUT
OFF, HDMI1, HDMI2, COMPUTER, HDBaseT
SUB INPUT POSITION
PICTURE SWAP
TOP-LEFT, TOP-RIGHT, BOTTOM-LEFT, BOTTOM-RIGHT
WALL COLOR
LIGHT MODE
(B) OFF, WHITEBOARD, BLACKBOARD, BLACKBOARD (GRAY), LIGHT
YELLOW, LIGHT GREEN, LIGHT BLUE, SKY BLUE, LIGHT ROSE, PINK
(B) ECO MODE
ADJUST
OFF, ECO, LONG LIFE
CONSTANT BRIGHTNESS
OFF, ON
OFF TIMER
(B) OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00
DATE AND TIME SETTINGS
ADMINISTRATOR MODE
(B) MENU MODE
NOT SAVE SETTING VALUES
KEYWORD
ADVANCED, BASIC
OFF, ON
OFF, ON
LANGUAGE
(B) ENGLISH, DEUTSCH, FRANÇAIS, ITALIANO, ESPAÑOL, SVENSKA,
日本語
DANSK, PORTUGUÊS, ČEŠTINA, MAGYAR, POLSKI, NEDERLANDS,
SUOMI
NORSK, TÜRKÇE, РУССКИЙ,
한국어, TIẾNG ViỆT
, ΕΛΛΗΝΙΚΆ, 简体中文,
ROMÂNĂ, HRVATSKI, БЪЛГАРСКИ, INDONESIA, हिन्दी, ไทย,
, 繁體中文
MENU
COLOR SELECT
INPUT DISPLAY
ID DISPLAY
COLOR, MONOCHROME
OFF, ON
OFF, ON
ECO MESSAGE
DISPLAY TIME
BACKGROUND
ORIENTATION
OFF, ON
MANUAL, AUTO 5 SEC, AUTO 15 SEC, AUTO 45 SEC
BLUE, BLACK, LOGO
INSTALLATION
AUTO, DESKTOP FRONT, CEILING REAR, DESKTOP REAR, CEILING
FRONT
CONTROL PANEL LOCK
SECURITY
OFF, ON
OFF, ON
COMMUNICATION SPEED
SERIAL PORT
4800bps, 9600bps, 19200bps, 38400bps
PC CONTROL, HDBaseT
ALL, FRONT/BACK, FRONT, BACK, HDBaseT
1–254
REMOTE SENSOR
CONTROL ID
CONTROL ID NUMBER
CONTROL ID
OFF, ON
TEST PATTERN
NETWORK SETTINGS
50
4. Using On-Screen Menu
Menu Item
SEAMLESS SWITCHING
FAN MODE
Options
SETUP
OPTIONS(1)
OFF, ON
AUTO, HIGH ALTITUDE
SIGNAL SELECT
WXGA MODE
COMPUTER
RGB/COMPONENT, RGB, COMPONENT
OFF, ON
DEINTERLACE
OFF, ON
VIDEO LEVEL
HDMI1
HDMI2
HDBaseT
AUTO, NORMAL, ENHANCED
AUTO, NORMAL, ENHANCED
AUTO, NORMAL, ENHANCED
OFF, ON
BEEP
OPTIONS(2)
STANDBY MODE
DIRECT POWER ON
AUTO POWER ON
AUTO POWER OFF
DEFAULT INPUT SELECT
CARBON CONVERT
CURRENCY
NORMAL, NETWORK STANDBY, SLEEP
OFF, ON
OFF, ON
OFF, 0:05, 0:10, 0:15, 0:20, 0:30, 1:00
LAST, AUTO, HDMI1, HDMI2, COMPUTER, HDBaseT, USB-A, LAN
$, €, JP¥, RMB¥
CURRENCY CONVERT
STATIC CONVERGENCE*
HORIZONTAL R
HORIZONTAL G
HORIZONTAL B
VERTICAL R
VERTICAL G
VERTICAL B
INFO.
USAGE TIME
SOURCE(1)
(B) LIGHT HOURS USED
TOTAL CARBON SAVINGS
TOTAL COST SAVINGS
(B) SOURCE NAME
SOURCE INDEX
HORIZONTAL FREQUENCY
VERTICAL FREQUENCY
SYNC TYPE
SYNC POLARITY
SCAN TYPE
SOURCE(2)
HDBaseT
(B) SIGNAL TYPE
VIDEO TYPE
BIT DEPTH
VIDEO LEVEL
SIGNAL QUALITY
OPERATION MODE
LINK STATUS
HDMI STATUS
WIRED LAN
IP ADDRESS
SUBNET MASK
GATEWAY
MAC ADDRESS
*
This function is not available for P525WL.
51
4. Using On-Screen Menu
Menu Item
IP ADDRESS
Options
INFO.
WIRELESS LAN
SUBNET MASK
GATEWAY
MAC ADDRESS
SSID
NETWORK TYPE
SECURITY
CHANNEL
SIGNAL LEVEL
VERSION(1)
VERSION(2)
OTHERS
(B) FIRMWARE
DATA
(B) FIRMWARE2
DATA2
(B) DATE TIME
(B)
(B)
(B)
(B)
(B)
PROJECTOR NAME
HOST NAME
MODEL NO.
SERIAL NUMBER
LAN UNIT TYPE
CONTROL ID (when [CONTROL ID] is set)
INTAKE TEMPERATURE
EXHAUST TEMPERATURE
INSTALLATION POSITION
X-AXIS
(B)
CONDITIONS
Y-AXIS
Z-AXIS
RESET
CURRENT SIGNAL
ALL DATA
52
4. Using On-Screen Menu
4-3. Menu Descriptions & Functions [INPUT]
HDMI1 and HDMI2
Selects the HDMI compatible equipment connected to your HDMI 1 IN or HDMI 2 IN terminal.
COMPUTER
Selects the computer connected to your COMPUTER IN terminal signal.
NOTE:
•
When the component input signal is connected to the COMPUTER IN terminal, select [COMPUTER].
HDBaseT
Projects the signal transmitted from the terminals supported HDBaseT.
USB-A
Start the [VIEWER].
Project the data of the USB memory set in this machine.
LAN
Display the start-up screen of MultiPresenter.
Selects a signal from the LAN port (RJ-45) or the installed USB wireless LAN unit (optional).
53
4. Using On-Screen Menu
4-4. Menu Descriptions & Functions [ADJUST]
[PICTURE]
[PRESET]
This function allows you to select optimized settings for your projected image.
You can adjust neutral tint for yellow, cyan or magenta.
There are seven factory presets optimized for various types of images. You can also use [DETAIL
SETTINGS] to set user adjustable settings to customize each gamma or color.
Your settings can be stored in [PRESET 1] to [PRESET 7].
HIGH-BRIGHT
PRESENTATION
VIDEO
Recommended for use in a brightly lit room.
Recommended for making a presentation using a PowerPoint file.
Recommended for typical TV program viewing.
Recommended for movies.
MOVIE
GRAPHIC
sRGB
Recommended for graphics.
Standard color values
DICOM SIM.
Recommended for DICOM simulation format.
NOTE:
•
•
The [DICOM SIM.] option is for training/reference only and should not be used for actual diagnosis.
DICOM stands for Digital Imaging and Communications in Medicine. It is a standard developed by the American College of Radiology
(ACR) and the National Electrical Manufacturers Association (NEMA).
The standard specifies how digital image data can be moved from system to system.
54
4. Using On-Screen Menu
[DETAIL SETTINGS]
This function allows you to store your customized settings in [PRESET 1] to [PRESET 7].
First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION], [SCREEN SIZE],
[COLOR TEMPERATURE], [DYNAMIC CONTRAST], [IMAGE MODE], and [COLOR ENHANCEMENT].
Storing Your Customized Settings [REFERENCE]
Select a mode to serve as the basis for the [DETAIL SETTINGS].
Selecting Gamma Correction Mode [GAMMA CORRECTION]
Each mode is recommended for:
DYNAMIC
Creates a high-contrast picture.
NATURAL
BLACK DETAIL
Natural reproduction of the picture.
Emphasizes detail in dark areas of the picture.
NOTE:
•
This function is not available when [DICOM SIM.] is selected for [DETAIL SETTINGS].
Selecting Screen Size for DICOM SIM. [SCREEN SIZE]
This function will perform gamma correction appropriate for the screen size.
LARGE
MEDIUM
SMALL
For screen size of 150"
For screen size of 100"
For screen size of 50"
NOTE:
•
This function is available only when [DICOM SIM.] is selected for [DETAIL SETTINGS].
55
4. Using On-Screen Menu
Adjusting Color Temperature [COLOR TEMPERATURE]
Adjust the balance of the colors (R, G, B) to optimize the color reproducibility.
A color temperature with a high numerical value becomes bluish white while one with a low nu-
merical value becomes reddish white.
A value between 5000 K and 10500 K can be set in 100 K units.
NOTE:
•
When [PRESENTATION] or [HIGH-BRIGHT] is selected in [REFERENCE], this function is not available.
Adjusting Brightness and Contrast [DYNAMIC CONTRAST]
If [ON] is selected, the most optimal contrast ratio is used according to the picture.
NOTE:
•
When [CONSTANT BRIGHTNESS] is activated, [DYNAMIC CONTRAST] cannot be selected.
Selecting Still Image Mode or Movie Mode [IMAGE MODE]
This function allows you to select the still image mode or the movie mode.
STILL
MOVIE
This mode is for a still image.
This mode is for a movie.
NOTE:
•
This function is available only when [HIGH-BRIGHT] is selected for [REFERENCE].
Enhancing the Color [COLOR ENHANCEMENT]
This allows you to adjust the color density of the image.
The color of the image will become deeper in the order of [LOW], [MEDIUM], and [HIGH] as the
displayed image will become darker.
With [OFF] selected, the [COLOR ENHANCEMENT] function will not work.
NOTE:
•
This function is available only when [PRESENTATION] is selected [REFERENCE].
Adjusting White Balance [WHITE BALANCE]
This allows you to adjust the white balance. Contrast for each color (RGB) to adjust the white level
of the screen; Brightness for each color (RGB) is used to adjust the black level of the screen.
NOTE:
•
When [WHITE BALANCE] is in operation, the actual color tone differs from the value of the [COLOR TEMPERATURE].
56
4. Using On-Screen Menu
[CONTRAST]
Adjusts the intensity of the image according to the incoming signal.
[BRIGHTNESS]
Adjusts the brightness level or the back raster intensity.
[SHARPNESS]
Controls the detail of the image.
[COLOR]
Increases or decreases the color saturation level.
[HUE]
Varies the color level from +/− green to +/− blue. The red level is used as reference.
Input signal
COMPUTER/HDMI/HDBaseT
(RGB)
CONTRAST
Yes
BRIGHTNESS
Yes
SHARPNESS
Yes
COLOR
No
HUE
No
COMPUTER/HDMI/HDBaseT
(COMPONENT)
USB-A, LAN
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes = Adjustable, No = Not adjustable
[RESET]
The settings and adjustments for [PICTURE] will be returned to the factory settings with the excep-
tion of the following; Preset numbers and [REFERENCE] within the [PRESET] screen.
The settings and adjustments under [DETAIL SETTINGS] within the [PRESET] screen that are not
currently selected will not be reset.
57
4. Using On-Screen Menu
[IMAGE OPTIONS]
Adjusting Clock and Phase [CLOCK/PHASE]
This allows you to manually adjust [CLOCK] and [PHASE].
CLOCK
Use this item to fine tune the computer image or to remove any vertical banding that might appear.
This function adjusts the clock frequencies that eliminate the horizontal banding in the image.
This adjustment may be necessary when you connect your computer for the first time.
PHASE
Use this item to adjust the clock phase or to reduce video noise, dot interference or cross talk. (This
is evident when part of your image appears to be shimmering.)
Use [PHASE] only after the [CLOCK] is complete.
58
4. Using On-Screen Menu
Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL]
Adjusts the image location horizontally and vertically.
NOTE:
•
•
An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction.
The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the current signal.The next time
you project the signal with the same resolution, horizontal and vertical frequency, its adjustments will be called up and applied.
To delete adjustments stored in memory, from the menu, you select [RESET] → [CURRENT SIGNAL] or [ALL DATA] and reset the
adjustments.
Selecting Overscan Percentage [OVERSCAN]
This allows you to set the appropriate overscan for an incoming signal.
When [AUTO] is selected, the over-scan that is most suitable for the input signal is carried out and
displayed.
Projected image
Overscaned by 10%
NOTE:
•
The [OVERSCAN] item cannot be selected when VIDEO signals are used or when [NATIVE] is selected for [ASPECT RATIO].
59
4. Using On-Screen Menu
Selecting Aspect Ratio [ASPECT RATIO]
The term “aspect ratio”refers to the ratio of width to height of a projected image.
The projector automatically determines the incoming signal and displays it in its appropriate aspect
ratio.
Options
Function
AUTO
The projector will automatically determine the incoming signal and display it in its aspect ratio.
The projector may erroneously determine the aspect ratio depending on its signal. If this occurs,
select the appropriate aspect ratio from the following.
4:3
The image is displayed in 4:3 aspect ratio.
16:9
15:9
16:10
The image is displayed in 16:9 aspect ratio.
The image is displayed in 15:9 aspect ratio.
The image is displayed in 16:10 aspect ratio.
LETTERBOX
The image of a letterbox signal is stretched equally in the horizontal and vertical directions to fit
the screen. Parts of the displayed image are cropped at the top and bottom edges and therefore not
visible.
NATIVE
The projector displays the current image in its true resolution when the incoming computer signal
has a lower resolution than the projector’s native resolution.
[Example] When the incoming signal with the resolution
of 800 × 600 is displayed:
NOTE:
•
•
When a non-computer signal is displayed, the [NATIVE] is not available.
When a signal with a higher resolution than the projector’s native resolution is displayed, [NATIVE]
is not available.
TIP:
•
This table shows typical resolutions and aspect ratios that most computers support.
Resolution
640 × 480
Aspect Ratio
VGA
SVGA
XGA
4:3
4:3
4:3
15:9
16:10
16:10
5:4
4:3
4:3
16:9
16:10
16:9
800 × 600
1024 × 768
1280 × 768
1280 × 800
1440 × 900
1280 × 1024
1400 × 1050
1600 × 1200
1920 × 1080
1920 × 1200
3840 × 2160
WXGA
WXGA
WXGA+
SXGA
SXGA+
UXGA
Full HD
WUXGA
4K
60
4. Using On-Screen Menu
[AUDIO]
Turning Up or Down Sound
Adjusts the volume of the projector speaker and AUDIO OUT (Stereo Mini Jack).
TIP:
•
When no menus appear, the ◀and ▶buttons on the projector cabinet and the VOL. +/− buttons on the remote control work as
a volume control. (→ page 30)
61
4. Using On-Screen Menu
4-5. Menu Descriptions & Functions [SETUP]
[GENERAL]
Correcting Keystone Distortion Manually [KEYSTONE]
You can correct horizontal or vertical keystone, pincushion LEFT/RIGHT or TOP/BOTTOM, or corner-
stone distortion manually.
NOTE:
•
•
•
•
[KEYSTONE HORIZONTAL] and [KEYSTONE VERTICAL] can be adjusted at once.
To change from one item to another item, reset the first item.
Adjustment values will be overwritten. They will not be deleted even when the projector is turned off.
Using [KEYSTONE], [PINCUSHION] and [CORNERSTONE] correction can cause the image to be slightly blurred because the correction
is made electronically.
KEYSTONE HORIZONTAL
Corrects horizontal keystone distortion. (→ page 28)
KEYSTONE VERTICAL
Corrects vertical keystone distortion. (→ page 28)
PINCUSHION LEFT/RIGHT
Corrects pincushion distortion at the left or right side. (→ page 39)
PINCUSHION TOP/BOTTOM Corrects pincushion distortion at the top or bottom side. (→ page
39)
62
4. Using On-Screen Menu
CORNERSTONE
Fits a projected image within the border of the screen easily by align
the four corner of an image to the ones of the screen. (→ page 37)
RESET
TIP:
Returns all the above items to the factory preset values.
•
Adjustable range of the KEYSTONE and the CORNERSTONE:
Horizontal Direction
Approx. 30° (Max)
Vertical Direction
Approx. 30° (Max)
Adjustable range may be narrower depending on input signal.
Simultaneous display of 2 images [PIP]
Two images are projected by a single projector.
SUB INPUT
Select the input signal to be displayed in the sub-display.
Please refer to “3-7 Displaying Two Pictures at the Same Time”(→ page 44) for details on the
operation.
SUB INPUT POSITION
Select the display position of the sub-screen from 4 locations.
(TOP-LEFT)
(TOP-RIGHT)
Sub-display
Main display
(BOTTOM-LEFT)
(BOTTOM-RIGHT)
PICTURE SWAP
The videos in the main display and sub-display will be switched.
Sub-display video
Main display video
Main display
video
Sub-display
video
When turned “OFF” When turned “ON”
NOTE:
When the input terminal of the main display is set to LAN, the display position cannot be switched.
•
63
4. Using On-Screen Menu
Using the Wall Color Correction [WALL COLOR]
This function allows for quick adaptive color correction in applications where the screen material
is not white.
NOTE:
•
Selecting [WHITEBOARD] reduces lamp brightness.
Eco mode selection and brightness adjustment [LIGHT MODE]
Adjusting the energy savings settings and the brightness of each projector in multi-screen projection.
For energy savings settings, see page 35“3-4 Changing Eco Mode/Checking Energy-Saving Effect”.
ECO MODE
OFF
The light module luminance (brightness) will be at the setup brightness for
[ADJUST].
ECO
By controlling the brightness and fan speed, energy can be saved and motion noise
and the power consumption can be lowered.
LONG LIFE
The mode optimizes the service life of the light module.
Brightness can be adjusted in 1% increments from 30 to 100%.
When several projectors are used for multi-screen projection, the brightness can be
adjusted individually on each projector.
ADJUST
The adjustment is valid when [ECO MODE] is set to [OFF].
[CONSTANT BRIGHTNESS] mode will be canceled.
Maintains the brightness that is in effect at the time [ON] is selected. Unless [OFF] is
selected, the same settings will remain in effect even when the projector is turned
off.
CONSTANT BRIGHTNESS OFF
ON
•
To re-adjust the brightness, first turn this setting OFF before making further
adjustments.
NOTE:
•
[CONSTANT BRIGHTNESS] mode is a function used to maintain the brightness at a
constant level. Color will not be fixed.
NOTE:
•
When [CONSTANT BRIGHTNESS] is set to [ON], [ECO MODE] and [ADJUST] cannot be selected.
TIP:
•
Brightness normally decreases with use, but by selecting [CONSTANT BRIGHTNESS] mode, the projector automatically adjust the
output based on the projector used time, thereby maintaining a constant brightness throughout the life of the light module.
However, if output is already at its maximum, brightness will decrease with use.
64
4. Using On-Screen Menu
Using Off Timer [OFF TIMER]
1. Select your desired time between 30 minutes and 16 hours: OFF, 0:30, 1:00, 2:00, 4:00,
8:00, 12:00, 16:00.
2. Press the ENTER button on the remote control.
3. The remaining time starts counting down.
4. The projector will turn off after the countdown is complete.
NOTE:
•
•
To cancel the preset time, set [OFF] for the preset time or turn off the power.
When the remaining time reaches 3 minutes before the projector is turned off, the [THE PROJECTOR WILL TURN OFF WITHIN 3
MINUTES.] message will be displayed on the bottom of the screen.
Setting the date and time [DATE AND TIME SETTINGS]
Display the start-up screen of MultiPresenter (→ page 144)
Configuring the menu settings [ADMINISTRATOR MODE]
This allows you to select [MENU MODE], save settings, and set a [KEYWORD] for the [ADMINISTRA-
TOR MODE].
MENU MODE
NOT SAVE SETTING VALUES When [ON] is selected, the values of the items configured in the on-screen menu will not be saved.
KEYWORD Assign a password for the administrator mode. (Up to 10 alphanumeric characters)
Select either [BASIC] or [ADVANCED] menu. (→ page 49)
Selecting Menu Language [LANGUAGE]
You can choose one of 30 languages for on-screen instructions.
NOTE:
•
Your setting will not be affected even when [RESET] is done from the menu.
65
4. Using On-Screen Menu
[MENU]
Selecting Menu Color [COLOR SELECT]
You can choose between two options for menu color: [COLOR] and [MONOCHROME].
Turning On / Off Input Display [INPUT DISPLAY]
This option turns on or off input name display such as [COMPUTER] to be displayed on the top
right of the screen.
When no input signal is present, the no-signal guidance prompting you to check for an available
input will be displayed at the center of the screen. When the [USB-A] or [LAN] item is selected for
[INPUT], the no-signal guidance will not be displayed.
Turning On/Off Control ID [ID DISPLAY]
This option turns on or off the ID number which is displayed when the ID SET button on the remote
control is pressed.
Turning On/Off Eco Message [ECO MESSAGE]
This option turns on or off the following messages when the projector is turned on.
The [ECO MESSAGE] prompts the user to save energy. When [OFF] is selected for [ECO MODE], you
will get a message to prompt you to set [ECO MODE].
To close the message, press any one of the buttons. The message will disappear if no button opera-
tion is done for 30 seconds.
Selecting Menu Display Time [DISPLAY TIME]
This option allows you to select how long the projector waits after the last touch of a button to turn
off the menu. The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC].
The [AUTO 45 SEC] is the factory preset.
66
4. Using On-Screen Menu
Selecting a Color or Logo for Background [BACKGROUND]
When the HDMI1, HDMI2, COMPUTER or HDBaseT input terminal is selected, select the desired
background when there is no input signal.
BLUE
BLACK
LOGO
The background color is blue
The background color is black
Display an image as the background
NOTE:
•
When [INPUT DISPLAY] is turned on, the no-signal guidance prompting you to check for an available input will be displayed at the
center of the screen regardless of its selection.
•
•
To change the background image to be displayed as a [LOGO], see Page 104.
Your setting will not be affected even when [RESET] is done from the menu.
67
4. Using On-Screen Menu
[INSTALLATION]
Selecting Projector Orientation [ORIENTATION]
This reorients your image for your type of projection. The options are: desktop front projection,
ceiling rear projection, desktop rear projection, and ceiling front projection.
WARNING
• Should special works be required, for example to suspend the projector from the ceiling,
consult your dealer.
Never try to install the projector yourself in such cases. The projector could drop and cause
injury.
AUTO
When the light module is turned ON, the inner sensor of the projector detects its installation state
either [DESKTOP FRONT] or [CEILING FRONT] and then switch its projection method
DESKTOP FRONT
CEILING REAR
DESKTOP REAR
68
4. Using On-Screen Menu
CEILING FRONT
Disabling the Cabinet Buttons [CONTROL PANEL LOCK]
This option turns on or off the [CONTROL PANEL LOCK] function.
NOTE:
•
•
This [CONTROL PANEL LOCK] does not affect the remote control functions.
How to release the [CONTROL PANEL LOCK]
1. When the projector is projecting image or in the sleep mode, press and hold the INPUT button on the projector cabinet for about
10 seconds. The [CONTROL PANEL LOCK] will be released.
2. When the projector is in the standby mode, press and hold the POWER button on the projector cabinet. It enables to power on
the projector. After checking the projector is projecting image, perform the previous step 1.
TIP:
•
When the [CONTROL PANEL LOCK] is turned on, a key lock icon [ ] will be displayed at the bottom right of the menu.
Enabling Security [SECURITY]
This feature turns on or off the [SECURITY] function.
Unless the correct keyword is entered, the projector cannot project an image. (→ page 41)
NOTE:
•
Your setting will not be affected even when [RESET] is done from the menu.
Selecting Communication Speed [COMMUNICATION SPEED]
This feature sets the baud rate of the PC Control port (D-Sub 9P). It supports data rates from 4800 to
38400 bps.The default is 38400 bps. Select the appropriate baud rate for your equipment to be con-
nected (depending on the equipment, a lower baud rate may be recommended for long cable runs).
NOTE:
•
Your selected communication speed will not be affected even when [RESET] is done from the menu.
Selecting the serial port [SERIAL PORT]
This sets which terminal on the projector will receive the serial control signals when operating the
projector by remote control from a commercially available HDBaseT transmitter (control signals
for turning the power on and off, etc.). There is no need to make this setting if not operating the
projector by remote control (only sending video and audio).
PC CONTROL
HDBaseT
Control signals (RS232C serial communications) are received at the PC CONTROL terminal.
The video/audio and control signals (RS232C serial communications) are received at the Ethernet/
HDBaseT port.
69
4. Using On-Screen Menu
NOTE:
•
When [HDBaseT] is set, the projector goes into the [SLEEP] mode regardless the setting for the standby mode (→page 74) on the
on-screen menu is [NORMAL] or [NETWORK STANDBY]. Based on this, the projector can be powered ON by an HDBaseT transmission
device that is connected to the projector when the projector is in the standby mode. However, the standby mode setting cannot
be changed when [HDBaseT] is set.
•
While [HDBaseT] is set for the [SERIAL PORT], power consumption in the standby mode becomes not to satisfy the energy saving
regulation.
TIP:
•
When controlling the projector using the LAN port, this works with either setting.
Turning On or Off Remote Sensor [REMOTE SENSOR]
Set the remote control sensors on the projector’s front and rear panels and the HDBaseT remote
control sensor.
The options are: [ALL], [FRONT/BACK], [FRONT], [BACK], and [HDBaseT].
TIP:
•
If the remote control system does not function when direct sunlight or strong illumination strikes the remote control sensor of the
projector, change another option.
•
The remote control sensor on the back of the projector cannot be used when the separately sold cable cover is mounted on the
projector.
Setting ID to the Projector [CONTROL ID]
You can operate multiple projectors separately and independently with the single remote control
that has the [CONTROL ID] function. If you assign the same ID to all the projectors, you can conve-
niently operate all the projectors together using the single remote control. To do so, you have to
assign an ID number to each projector.
CONTROL ID NUMBER
CONTROL ID
Select a number from 1 to 254 you wish to assign to your projector.
Select [OFF] to turn off the [CONTROL ID] setting and select [ON] to turn on the [CONTROL ID]
setting.
NOTE:
•
When [ON] is selected for [CONTROL ID], the projector cannot be operated by using the remote control that does not support the
CONTROL ID function. (In this case the buttons on the projector cabinet can be used.)
•
•
Your setting will not be affected even when [RESET] is done from the menu.
Pressing and holding the ENTER button on the projector cabinet for 10 seconds will display the menu for canceling the Control ID.
70
4. Using On-Screen Menu
Assigning or Changing the Control ID
1. Turn on the projector.
2. Press the ID SET button on the remote control.
The [CONTROL ID] screen will be displayed.
If the projector can be operated with the current remote control ID, the
[CONTROL ID (ACTIVE)] will be displayed. If the projector cannot be op-
erated with the current remote control ID, the [CONTROL ID (INACTIVE)]
will be displayed.To operate the inactive projector, assign the [CONTROL
ID] used for the projector by using the following procedure (Step 3).
3. Press one of numeric keypad buttons while pressing and holding
the ID SET button on the remote control.
Example:
To assign “3”, press the “3”button on the remote control.
No ID means that all the projectors can be operated together with a
single remote control. To set “No ID”, enter “000” or press the CLEAR
button.
TIP:
•
The range of IDs is from 1 to 254.
4. Release the ID SET button.
The updated [CONTROL ID] screen will be displayed.
NOTE:
•
•
The IDs can be cleared in a few days after the batteries are run down or removed.
Accidentally pressing any one of the buttons of the remote control will clear currently speci-
fied ID with batteries removed.
Using Test Pattern [TEST PATTERN]
Displays the test pattern for adjusting distortion on the screen and the focus at the time of the pro-
jector setup. Once the [TEST PATTERN] on the onscreen menu is selected, the pattern for adjustment
will be displayed on. If you find distortion on the pattern, adjust the projector installation angle
or correct distortion by pressing the KEYSTONE button on the remote. If the focus adjustment is
required, control the focus lever. Recommend to perform the focus adjustment after leaving the
projector under the state the TEST PATTERN has been projected for over 30 minutes. Press EXIT
button to close the test pattern and return to the menu.
Setting the network [NETWORK SETTINGS]
This function display the [NETWORK SETTINGS] menu. (→ page 109)
71
4. Using On-Screen Menu
[OPTIONS(1)]
Switching the displayed image smoothly [SEAMLESS SWITCHING]
When the input connector is switched, the image displayed before switching is held to switch to
the new image without a break due to absence of a signal.
Selecting Fan Mode [FAN MODE]
[FAN MODE] is used to set the speed of the internal cooling fan.
AUTO
HIGH ALTITUDE
The built-in fans automatically run at a variable speed according to the internal temperature.
The built-in fans run at a high speed. Select this option when using the projector at altitudes ap-
proximately 5500 feet/1700 meters or higher.
NOTE:
•
•
Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1700 meters or higher.
Using the projector at altitudes approximately 5500 feet/1700 meters or higher without setting to [HIGH ALTITUDE] can cause the
projector to overheat and the protector could shut down. If this happens, wait a couple minutes and turn on the projector.
Using the projector at altitudes approximately 5500 feet/1700 meters or higher can shorten the life of optical components such
as the light module.
•
•
Your setting will not be affected even when [RESET] is done from the menu.
Selecting Signal Format [SIGNAL SELECT]
This selects the signal to be input in the COMPUTER IN Terminal. Normally, this is set to [RGB/COM-
PONENT]. Change the setting if the color of the picture is unnatural.
RGB/COMPONENT
RGB
Automatically distinguishes RGB and component signals.
Switches to the RGB input.
COMPONENT
Switches to the component input.
Enabling or Disabling WXGA Mode [WXGA MODE]
Selecting [ON] will give priority to WXGA (1280 × 768)/WUXGA (1920 × 1200) signals in recognizing
an input signal.
When [WXGA MODE] is set to [ON], XGA (1024 × 768)/UXGA (1600 × 1200) signals may not be
recognized. In this case, select [OFF].
NOTE:
•
The [ON] is selected at the time of shipment.
72
4. Using On-Screen Menu
Enabling the deinterlace [DEINTERLACE]
Turns on or off the deinterlace function for a telecine signal.
OFF
ON
Select this option if there is any jitter or artifacts in video.
Default standard setting.
NOTE:
•
This function is not available for HDTV (progressive) and computer signals.
Setting HDMI1, HDMI2, or HDBaseT [VIDEO LEVEL]
Make the settings for each video level when connecting HDMI equipment and Ethernet/HDBaseT
terminal.
Select [AUTO] to automatically detect video level. If automatic detection may not work well, select
[NORMAL] to disable the [ENHANCED] feature of your HDMI equipment or select [ENHANCED] to
improve image contrast and increase detail in the dark areas.
Enabling Key Sound and Error Sound [BEEP]
This feature turns on or off the button sound or alarm when an error occurs or the following opera-
tions are performed.
TIP:
•
Volume control for [BEEP] is disabled. AV-MUTE button is not effective to stop beeping sound. If you want to activate BEEP function, set [BEEP] to
[OFF].
73
4. Using On-Screen Menu
[OPTIONS(2)]
Selecting Power-saving in [STANDBY MODE]
Set the mode after turning off the power of the projector.
NORMAL
The projector will go into the standby mode, lowering the power con-
sumption. The POWER indicator flashes in orange.
Power consumption:
Low
When [NORMAL] is selected, only the following buttons and feature will
work:
POWER button on the projector cabinet and the remote control, powering
on from PC Control command, and AUTO POWER ON.
The projector goes into the network standby mode. The power supply of
the projector can be turned on using a wired LAN (LAN port).
The POWER indicator lights up in orange.
NETWORK STANDBY
Power consumption:
Medium
When [NETWORK STANDBY] is selected, only the following buttons,
terminals, and features will work:
POWER button on the projector cabinet and the remote control, powering
on from PC Control command, [AUTO POWER ON], [NETWORK SERVICE].
SLEEP
The projector is maintained in the sleep mode. In addition to the buttons, Power consumption:
terminals and functions that operate in the network standby mode, you
can operate the projector with a HDBaseT-compatible transmission device
connected to the Ethernet/HDBaseT port.
High
POWER indicator lights up in green.
74
4. Using On-Screen Menu
Important:
•
•
•
When [NETWORK STANDBY] has been set for [STANDBY MODE] and the LAN has been in link-down condition for 3 minutes, [STANDBY
MODE] will transit into [NORMAL] automatically for the purpose to save the consumption power.
When [NETWORK STANDBY] is selected, [AUTO POWER OFF] will turn in grey and be disabled and [0:15] will be selected automati-
cally for [AUTO POWER OFF].
In the below conditions, setting of the [STANDBY MODE] is disabled and the projector will go into the SLEEP mode*.
*
Sleep mode refers the mode without functional restrictions by the [STANDBY MODE].
When [STANDBY MODE] → [NETWORK STANDBY] is selected
-
-
-
-
-
When [NETWORK SERVICE] → [AMX BEACON] → [ON] is selected
When [NETWORK SERVICE] → [Extron XTP] → [ON] is selected
When [NETWORK SERVICE] → [CRESTRON] → [Crestron Control] → [ON] is selected
When [NETWORK SETTINGS] →[WIRELESS LAN] →Except for [DISABLE] and mounting the wireless LAN unit to the projector
When the signal is input to the computer, HDMI 1 IN or HDMI 2 IN terminals
TIP:
•
Even when [NORMAL] is selected for [STANDBY MODE], power on or off can be done by using the PC CONTROL port. However, in the
[NORMAL] mode, ASCII CONTROL COMMAND cannot be used.When using ASCII CONTROL COMMAND, set it to [NETWORK STANDBY]
or [SLEEP].
•
•
The power consumption in the standby mode will not be included in calculating CO2 emission reduction.
Your setting will not be affected even when [RESET] is done from the menu.
Enabling Direct Power On [DIRECT POWER ON]
Turns the projector on automatically when the power cord is inserted into an active power outlet.
This eliminates the need to always use the POWER button on the remote control or projector cabinet.
Turning On the Projector By Applying Computer Signal [AUTO POWER ON]
When the projector is in Standby mode, applying a computer or HDMI signal from a computer
connected to the COMPUTER IN input, HDMI 1 IN, or HDMI 2 IN input will power on the projector
and simultaneously project the image.
This functionality eliminates the need to always use the POWER button on the remote control or
the projector cabinet to power on the projector.
To use this function, first connect a computer to the projector and the projector to an active AC input.
NOTE:
•
This function will not be available under the following conditions:
-
-
when a component signal is applied to the COMPUTER IN terminal
when a Sync on Green RGB signal or composite sync signal is applied
•
To enable the [AUTO POWER ON] after changing to the sleep mode turning off the projector, wait 5 seconds and input a computer
or HDMI signal.
If a computer or HDMI signal is still present when the projector is turned off, the [AUTO POWER ON] will not work and the projector
remains in standby mode.
•
•
When multiple devices are connected to the projector, the signal of the devices different from the input signal may be projected
by the AUTO POWER ON.
In this case, please use the AUTO POWER ON after turning off unnecessary devices among the devices connected to the projector.
Depending on the projector in use, the AUTO POWER ON may not work properly.
In this case, set [STANDBY MODE] to [NETWORK STANDBY].
75
4. Using On-Screen Menu
Enabling Power Management [AUTO POWER OFF]
When this option is selected you can enable the projector to automatically turn off (at the selected
time: 0:05, 0:10, 0:15, 0:20, 0:30, 1:00) if there is no signal received by any input or if no operation
is performed.
Selecting Default Source [DEFAULT INPUT SELECT]
You can set the projector to default to any one of its inputs each time the projector is turned on.
LAST
AUTO
Sets the projector to default to the previous or last active input each time the projector is turned on.
Searches for an active source in order of [HDMI1] → [HDMI2] → [COMPUTER] → [HDBaseT] →
[USB-A] → [LAN] and displays the first found source.
HDMI1
HDMI2
COMPUTER
HDBaseT
USB-A
Displays the digital source from the HDMI 1 IN terminal every time the projector is turned on.
Displays the digital source from the HDMI 2 IN terminal every time the projector is turned on.
Displays the computer signal from the COMPUTER IN terminal every time the projector is turned on.
Projects the signal transmitted from the terminals supported HDBaseT.
Display the [VIEWER].
LAN
Displays a signal from LAN port (RJ-45) or the USB Wireless LAN Unit.
Setting carbon footprint factor [CARBON CONVERT]
Adjusts the carbon footprint factor in the carbon saving calculation. The initial setting is 0.505[kg-
CO2/kWh] based on the CO2 Emissions from Fuel Combustion (2008 Edition) published by OECD.
Selecting your currency [CURRENCY]
Displays electricity pricing (available in 4 currency units).
$
US Dollar
€
EU Euro
JP¥
RMB¥
Japanese Yen
Chinese Yuan
Changing currency setting and currency convert setting [CURRENCY CONVERT]
Changes currency setting and currency convert setting for CARBON METER.
The initial setting are as follows:
US Dollar
EU Euro
Japanese Yen
Chinese Yuan
0.11 [$/kWh]
0.19 [€/kWh]
20 [¥/kWh]
0.48 [¥/kWh]
The initial settings for US dollar, EU Euro, and Japanese Yen are based on “Energy Prices and Taxes
(second quarter 2010”published by OECD.
The initial setting for Chinese Yuan is based on “Chinese Data File (2010)”published by JETRO.
76
4. Using On-Screen Menu
Adjusting the color shift of the screen [STATIC CONVERGENCE]
This features allows you to adjust for color deviation in the picture.
This can be adjusted in units of 1 pixel in the horizontal direction for HORIZONTAL R, G and B, in
the vertical direction for VERTICAL R, G and B.
NOTE:
•
This function is not available for P525WL.
77
4. Using On-Screen Menu
4-6. Menu Descriptions & Functions [INFO.]
Displays the status of the current signal and light module usage. This item has nine pages. The
information included is as follows:
TIP:
•
Pressing the HELP button on the remote control will show the [INFO.] menu items.
[USAGE TIME]
[LIGHT HOURS USED] (H)
[TOTAL CARBON SAVINGS] (kg-CO2)
[TOTAL COST SAVINGS]
•
[TOTAL CARBON SAVINGS]
This displays the estimated carbon saving information in kg. The carbon footprint factor in the
carbon saving calculation is based on the OECD (2008 Edition). (→ page 36)
[SOURCE(1)]
[SOURCE NAME]
[HORIZONTAL FREQUENCY]
[SYNC TYPE]
[SOURCE INDEX]
[VERTICAL FREQUENCY]
[SYNC POLARITY]
[SCAN TYPE]
[SOURCE(2)]
[SIGNAL TYPE]
[BIT DEPTH]
[VIDEOTYPE]
[VIDEO LEVEL]
[HDBaseT]
[SIGNAL QUALITY]
[LINK STATUS]
[OPERATION MODE]
[HDMI STATUS]
[WIRED LAN]
[IP ADDRESS]
[GATEWAY]
[SUBNET MASK]
[MAC ADDRESS]
[WIRELESS LAN]
[IP ADDRESS]
[GATEWAY]
[SSID]
[SUBNET MASK]
[MAC ADDRESS]
[NETWORKTYPE]
78
4. Using On-Screen Menu
[SECURITY]
[CHANNEL]
[SIGNAL LEVEL]
[VERSION(1)]
[FIRMWARE] Version
[DATA] Version
[DATA2] Version
[VERSION(2)]
[FIRMWARE2] Version
[OTHERS]
[DATE TIME]
[HOST NAME]
[PROJECTOR NAME]
[MODEL NO.]
[SERIAL NUMBER]
[LAN UNITTYPE]
[CONTROL ID] (when [CONTROL ID] is set)
[CONDITIONS]
[INTAKE TEMPERATURE]
[INSTALLATION POSITION]
[Y-AXIS]
[EXHAUSTTEMPERATURE]
[X-AXIS]
[Z-AXIS]
About the X-AXIS, Y-AXIS and Z-AXIS CONDITIONS
(NOTE) Arrow direction of the Z-AXIS in the figure represents the top of the projector.
X-AXIS
Y-AXIS
Z-AXIS
Display the projector image at an angle of −100 – +100
degrees to the horizontal in the X-axis direction.
X-AXIS value of
the projector
Horizontal plane
X-axis
Gravity direction
Display the projector image at an angle of −100 – +100
degrees to the horizontal in the Y-axis direction.
Y-AXIS value of
the projector
Horizontal plane
Y-axis
Gravity direction
Display the projector image at an angle of −100 – +100
degrees to the vertical in the Z-axis direction.
Z-AXIS value of the projector
Horizontal
plane Z-axis
Gravity direction
79
4. Using On-Screen Menu
4-7. Menu Descriptions & Functions [RESET]
Returning to Factory Default [RESET]
The [RESET] feature allows you to change adjustments and settings to the factory preset for a (all)
source(s) except the following:
[CURRENT SIGNAL]
Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS],
[ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and [OVERSCAN].
[ALL DATA]
Reset all the adjustments and settings for all the signals to the factory preset.
All items can be reset EXCEPT [KEYSTONE HORIZONTAL], [KEYSTONEVERTICAL], [PINCUSHION], [DATE
AND TIME SETTINGS], [ADMINISTRATOR MODE], [LANGUAGE], [ECO MESSAGE], [BACKGROUND],
[ORIENTATION], [SECURITY], [COMMUNICATION SPEED], [SERIAL PORT], [CONTROL ID], [NETWORK
SETTINGS], [SEAMLESS SWITCHING], [FAN MODE], [SIGNAL SELECT], [DEINTERLACE], [STANDBY
MODE], [CARBON CONVERT], [CURRENCY], [CURRENCY CONVERT], [STATIC CONVERGENCE], [LIGHT
HOURS USED], [TOTAL CARBON SAVINGS], [TOTAL COST SAVINGS], [PROJECTOR NAME], [WIRED
LAN], and [WIRELESS LAN].
80
5. Making Connections
NOTE:
•
Use the attached specified cables with this monitor so as not to interfere with radio and television reception.
For HDMI, LAN, RS232C and AUDIO, please use a shielded signal cable.
For 15-pin mini D-SUB, please use a shielded signal cable with ferrite core.
Use of other cables and adapters may cause interference with radio and television reception.
5-1. Connecting Your Computer
Computer cables and HDMI can be used to connect to a computer. The HDMI cable is not enclosed
with the projector. Please get ready a suitable cable for the connection.
NOTE:
•
Signals supported by Plug & Play (DDC2)
INPUT
HDMI 1 IN
digital
Yes
COMPUTER IN
analog
HDMI 2 IN
digital
Yes
Yes
NOTE:
•
•
The projector is not compatible with video decoded outputs of the NEC ISS-6020 switcher.
An image may not be displayed correctly when a Video source is played back via a commercially available scan converter.
This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following.
*
When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly:
Project an image to fill the screen and then press the AUTO ADJ. button on the remote control.
81
5. Making Connections
HDMI cable (not supplied)
Use High Speed HDMI® Cable.
HDMI 1 IN
HDMI 2 IN
COMPUTER IN
AUDIO IN
Stereo mini-plug audio cable
(not supplied)
Computer cable (VGA) (supplied)
To mini D-Sub 15-pin terminal on the projector. It is recommended that you use a commercially
available distribution amplifier if connecting a signal cable longer than the cable supplied.
NOTE:
•
For Mac, use a commercially available pin adapter (not supplied) to connect to your Mac’s video port.
• Select the source name for its appropriate input terminal after turning on the projector.
Input terminal
HDMI 1 IN
INPUT button on the projector cabinet
Button on the remote control
HDMI1
HDMI2
HDMI1
HDMI2
HDMI 2 IN
COMPUTER IN
COMPUTER
COMPUTER
82
5. Making Connections
Cautions when using a DVI signal
• When the computer has a DVI output terminal, use a commercially available converter cable
to connect the computer to the projector’s HDMI 1 IN or HDMI 2 IN terminal (only digital video
signals can be input).
- Only digital video signals can be input.
- Audio input is not supported.
HDMI 2 IN
HDMI 1 IN
NOTE:
When Viewing a DVI Digital Signal
•
•
•
Turn off the power of the computer and projector before connecting.
When a video deck is connected via a scan converter, etc., the display may not be correct during fast-forwarding and rewinding.
Use a DVI-to-HDMI cable compliant with DDWG (Digital DisplayWorking Group) DVI (DigitalVisual Interface) revision 1.0 standard.
The cable should be within 197"/5 m long.
•
•
Turn off the projector and the PC before connecting the DVI-to-HDMI cable.
To project a DVI digital signal: Connect the cables, turn the projector on, then select the HDMI input. Finally, turn on your PC.
Failure to do so may not activate the digital output of the graphics card resulting in no picture being displayed. Should this happen,
restart your PC.
•
Do not disconnect the DVI-to-HDMI cable while the projector is running. If the signal cable has been disconnected and then recon-
nected, an image may not be correctly displayed. Should this happen, restart your PC.
The COMPUTER video input terminals support Windows Plug and Play.
•
•
A Mac signal adapter (commercially available) may be required to connect a Mac computer.
83
5. Making Connections
5-2. Connecting to a DVD player and other AV devices
Connecting Component Input
Connection for component signal. Signal from the color difference signal output terminal on DVD
players (DVD video output) and the YPbPr output terminal on the Hi-vision video can be projected.
Recommend to connect the terminal for audio output on the DVD player to the audio components.
COMPUTER IN
AUDIO IN
15-pin - to - RCA (female) × 3
cable adapter (ADP-CV1E)
Stereo mini plug - to - RCA audio cable (not
supplied)
Audio Equipment
Component video RCA × 3
cable (not supplied)
Audio cable (not supplied)
DVD player
• Select the source name for its appropriate input terminal after turning on the projector.
Input terminal
COMPUTER IN
INPUT button on the projector cabinet
COMPUTER
Button on the remote control
COMPUTER
NOTE:
•
Refer to your DVD player’s owner’s manual for more information about your DVD player’s video output requirements.
84
5. Making Connections
Connecting HDMI Input
You can connect the HDMI output of your DVD player, hard disk player, Blu-ray player, or notebook
type PC to the HDMI IN terminal of your projector.
HDMI 1 IN
HDMI 2 IN
HDMI cable (not supplied)
Use High Speed HDMI® Cable.
Audio cable (not supplied)
• Select the source name for its appropriate input terminal after turning on the projector.
Input terminal
HDMI 1 IN
INPUT button on the projector cabinet
Button on the remote control
HDMI1
HDMI2
HDMI1
HDMI2
HDMI 2 IN
• When connecting the HDMI 1 IN terminal (or HDMI 2 IN terminal) of the projector to the DVD
player, the projector’s video level can be made settings in accordance with the DVD player’s video
level. In the menu select [HDMI SETTINGS] → [VIDEO LEVEL] and make necessary settings.
85
5. Making Connections
5-3. Connecting to a Wired LAN
When the projector is connected to a wired LAN, you can use the web browser on a computer to
control the projector using the HTTP server function.
For more information, see “7. Connecting to a Network”(→ page 106).
Example of LAN connection
Example of wired LAN connection
Server
Hub
LAN cable (not supplied)
NOTE:
•
Use a Category 5 or higher LAN cable.
LAN
86
5. Making Connections
5-4. Connecting to a Wireless LAN (Optional: NP05LM series)
The USB Wireless LAN Unit also provides a wireless LAN connection. To use a wireless LAN connec-
tion, you are required to assign an IP address to the projector.
For more information, see “7. Connecting to a Network”(→ page 106).
Important:
•
If you use the projector with the USB Wireless LAN Unit in the area where the use of wireless LAN equipment is prohibited, remove
the USB Wireless LAN Unit from the projector.
•
Buy the appropriate USB Wireless LAN Unit for your country or area.
NOTE:
•
•
Do not press the button on the USB Wireless LAN Unit. The button does not work with this model.
Your computer’s wireless LAN adapter (or unit) must be complied with Wi-Fi (IEEE802.11a/b/g/n) standard.
Example of wireless LAN connection
PC with wireless LAN card
inserted
PC with built-in wireless LAN
function
USB Wireless LAN Unit
Wireless access point
Wired LAN
87
5. Making Connections
Attaching the USB Wireless LAN Unit
NOTE:
•
The USB Wireless LAN Unit must be inserted into the USB Wireless LAN Unit port in the correct direction. It cannot be inserted in
the reverse direction. If the USB Wireless LAN Unit is inserted in the reverse direction with excessive force applied, the USB port
may break.
•
•
Before touching the USB Wireless LAN Unit, touch a metallic object (such as a door knob or aluminum window frame) to discharge
the static electricity from your body.
Always insert or remove the USBWireless LAN unit when the main power is turned off. Failure to do so may cause projector malfunc-
tion or damage to the USB wireless LAN unit. If the projector will not work correctly, turn off the projector, disconnect the power
cord, and then connect it again.
•
Do not insert other USB devices into the USB (wireless LAN) port in the wireless LAN cover. Do not insert the USB Wireless LAN unit
into the USB port.
NOTE:
•
When the cable cover is attached, remove it before inserting the USB Wireless LAN Unit.
1. Press the POWER button to turn off the pro-
jector and set it into standby condition, and
disconnect the power cord.
2. Remove the wireless LAN cover.
(1) Turn the screw counterclockwise until it
turns freely.
(2) Hold the head of the screw and remove.
88
5. Making Connections
3. Insert the wireless LAN unit into the USB
(wireless LAN) port with the side containing
the indicator facing up.
•
Slowly slide the wireless LAN unit left and
right, up and down, checking the insertion
slot as you push the unit in.
W
I
R
E
L
E
S
S
S
S
E
L
E
R
I
W
NOTE:
Do not force to insert the USB Wireless LAN Unit.
•
4. Mount the wireless LAN cover.
Hook
(1) Insert the hook on the back of the cover
into the groove in the projector and close
the wireless LAN cover.
Groove
(2) Turn the screw clockwise to tighten it.
*
To remove the USB Wireless LAN Unit, dis-
connect the power cord and use the above
procedure.
89
5. Making Connections
5-5. Connecting to a HDBaseT transmission device (sold commercially)
HDBaseT is a connection standard for home appliances that is established by the HDBaseT Alliance.
Use a LAN cable sold commercially to connect the Ethernet/HDBaseT port of the projector (RJ-45)
to a HDBaseT transmission device sold commercially.
The Ethernet/HDBaseT port of the projector supports HDMI signals (HDCP) from transmission de-
vices, control signals from external devices (serial, LAN) and remote control signals (IR commands).
Connection example
Computer (for output use)
Computer (for control use)
Remote control
Example of a transmission device
HDMI output video device
Ethernet/HDBaseT
90
5. Making Connections
NOTE:
•
•
•
•
Please use a shielded twisted pair (STP) cable of Category 5e or higher for the LAN cable (sold commercially).
The maximum transmission distance over the LAN cable is 100 m.
Short cable such as 0.5 m is not applicable in HDBaseT Projector installations.
Please do not use other transmission equipment between the projector and transmission equipment. The picture quality may be
deteriorated as a result.
•
This projector is not guaranteed to work with all HDBaseT transmission devices sold commercially.
91
5. Making Connections
5-6. Portrait projection (vertical orientation)
Portrait screens from a computer can be projected
by installing the projector in a vertical orientation.
Precautions during installation
•
•
Please do not install the projector in a vertical orientation on top of the floor or table on its
own. The intake vent or the exhaust vent may be obstructed, resulting in the projector get-
ting warm and the possibility of fire and malfunction occurring.
A stand for supporting the projector needs to be made for this purpose. In this case, the stand
must be designed such that the center of gravity of the projector is located well within the
legs of the stand. If not, the projector may fall over and result in injury, damage and malfunc-
tion.
•
Take measures to prevent the projector from falling in anticipation of a malfunction occurring
in the projector or stand.
92
5. Making Connections
Design and manufacturing conditions for the stand
Please engage an installation service provider for the design and manufacture of the customized
stand to be used for portrait projection. Please ensure that the following are complied with when
designing the stand.
1. Installation facing the exhaust vent downward, maintain a distance of at least 200 mm between
the projector exhaust vent and the floor.
Do not obstruct the intake vent at the rear of the projector.
2. Use the four screw holes on the bottom face of the projector to secure it to the stand.
Screw hole center dimension: 200 × 250 mm
Screw hole dimension on the projector: M4 with a maximum depth of 8 mm.
*
Please design the stand such that the rear legs on the bottom face of the projector do not
contact the stand. The tilt foot can be turned and removed.
3. Horizontal adjustment mechanism (for example, bolts and nuts in four locations)
4. Please design the stand such that it does not topple over easily.
93
5. Making Connections
Reference drawings
* The drawing showing the dimensional requirements is not an actual stand design drawing.
(Unit: mm)
200
Screw holes for 4 - M4 use
Notch
Intake vent
Exhaust Vent
[Front View]
[Side View]
Horizontal adjuster
Installation facing the exhaust vent downward, maintain a distance of at
least 200 mm between the projector Exhaust vent and the floor.
94
6. Using the VIEWER
6-1. Things you can do with the VIEWER
The [VIEWER] has the following features.
• When you insert a commercially available USB memory containing the picture into the USB port
of the projector (Type A), the images on the USB can be projected by the unit. By doing this, you
can make a presentation without using a personal computer.
• The types of images that can be projected in the [VIEWER] are JPEG and PNG.
• Thumbnails can be displayed in the [VIEWER], allowing you to quickly select a picture to be
projected.
• When projecting multiple pictures continuously ([SLIDESHOW]), the pictures may be switched
manually (manual playback) or automatically ([AUTO PLAY]).The interval for changing the pictures
can also be modified during [AUTO PLAY].
• The projection order can be specified by the picture file name, file type, date and size, and the
ascending/descending order can be selected.
• The orientation of the picture can be rotated in units of 90°.
• You can change the screen of the input terminal in a signal-less state (background logo) or the
background image of the MultiPresenter start-up screen (MultiPresenter logo). You can also set
a password to prohibit third parties from changing the pictures. (→ page 104)
NOTE:
•
When the [VIEWER] (slide screen, file list screen) is being displayed, keystone correction using the ▼/▲ buttons is not possible.
To perform keystone correction when the [VIEWER] is being displayed, press the MENU button 2 times to display the on-screen
menu.
•
•
When the [VIEWER] is being displayed, the FREEZE button on the remote controller does not work.
When you select [RESET] → [ALL DATA] in the on-screen menu, the option menu settings of the [VIEWER] return to the default
state when shipped from the factory.
•
•
About USB memory
Format the USB memory used by the [VIEWER] of the projector in the FAT32 format or FAT16 format.
-
-
-
-
The projector cannot recognize a USB memory that has been formatted in the NTFS format.
Check the file system format if the USB memory inserted into the projector is not recognized.
Refer to the instruction manual or the help file of the Windows you are using for details on how to format a USB memory.
The USB port of the projector does not guarantee that all USB memories commercially available will work.
About compatible images
The following pictures can be projected by the [VIEWER].
-
JPEG
Extension
Format
jpg, jpe, jpeg (case insensitive)
Baseline, progressive
Color
RGB, grayscale
Resolution
Baseline: Maximum 10000 × 10000 (pixel)
Progressive: Maximum 2000 × 2000 (pixel)
EXIF information (rotation/thumbnail, etc.) is not supported.
png (case insensitive)
Normal, interlace
RGB, index color, grayscale
EXIF
PNG
Extension
Format
Color
Resolution
Normal: Maximum 10000 × 10000 (pixel)
Interlace: Maximum 2000 × 2000 (pixel)
95
6. Using the VIEWER
6-2. Projecting the pictures on a USB memory (basic operation)
This section explains the basic operations of the [VIEWER].This is the operating procedure when the
option menu (→ page 103) of the [VIEWER] is in the default state when shipped from the factory.
① Start the [VIEWER]
1. Turn on the projector.
USB
2. Insert a USB memory into the USB-A port of
the projector.
NOTE:
•
To remove a USB memory from the projector, press the
MENU button in the file list screen or [DRIVE LIST] screen and
select [REMOVE USB DEVICE]. (→Page 98“Remove the USB
memory”)
3. Press the INPUT button.
The [INPUT] screen is displayed.
•
Press the SOURCE button when using the
remote control.
4. Press the INPUT button a few times and move
the cursor to [USB-A].
•
Every time the INPUT button is pressed
briefly, the cursor moves to the next input
terminal.
•
Move the cursor to [USB-A] and wait for
a while for the [VIEWER] to start and the
[DRIVE LIST] screen on the USB memory to
be projected.
5. Check that the cursor is moved to [USB 1] and
press the ENTER button.
The file list screen will be displayed.
96
6. Using the VIEWER
6. Move the cursor to the folder or image file
with the ▲▼◀▶ buttons and press the EN-
TER button.
•
When a folder is selected, the file list screen
for the folder is displayed.
•
If an image file is selected, the slide screen
will be displayed.
7. Move the cursor to the image file in the file
list screen, then press the ENTER button.
The slide screen will be displayed.
8. Press the ▶ button.
The next image will be projected.
9. Press the ◀ button.
The previous image will be projected.
10. Press the MENU button.
The control bar will be displayed.
•
Press the MENU button while the control
bar is being displayed to display the [INPUT]
screen. When you press the MENU button
again, the [INPUT] screen disappears.
•
When you press the EXIT button while the
control bar is being displayed, the control
bar disappears.
97
6. Using the VIEWER
11. Press the ▶button to move the cursor to
,
then press the ENTER button.
The picture will rotate clockwise by 90°.
•
Every time you press the ENTER button in
this state, the picture rotates 90° clockwise.
12. Press the ▶button to move the cursor to
,
then press the ENTER button.
The control bar disappears.
13. Press the EXIT button.
The display changes to the file list screen.
•
You can also move the cursor to
with
the control bar of the step 10 and press the
ENTER button to change the file list screen.
•
To return to the slide screen from the file
list screen, move the cursor to the picture
to be displayed in the slideshow and press
the ENTER button.
② Remove the USB memory
1. Press the MENU button in the file list screen.
A pop-up menu will be displayed at the bottom
left of the screen.
•
Press the MENU button while the pop-up
menu is being displayed to display the
[INPUT] screen. When you press the MENU
button again, the [INPUT] screen disap-
pears.
•
When you press the EXIT button while the
pop-up menu is being displayed, the pop-
up menu disappears.
2. Move the cursor to [REMOVE USB DEVICE]
and press the ENTER button.
A confirmation message will be displayed in the
center of the screen.
3. To remove the USB memory, press the ◀
button to move the cursor to [OK] and press
the ENTER button.
The message displayed in the center of the
screen changes.
4. Press the ENTER button.
98
6. Using the VIEWER
5. Remove the USB memory from the projector.
NOTE:
•
If you remove a USB memory from the projector without
executing [REMOVE USB DEVICE] in the menu, the operation
of the unit may become unstable. In that case, turn off the
power of the unit once and unplug the power cord from the
outlet.
USB
Subsequently, wait for about 3 minutes before connecting
the power cord to the socket and turning on the power of
the unit.
③ End the [VIEWER]
1. Press the MENU button in the slide screen or
file list screen.
A control bar or a pop-up menu will be dis-
played.
2. Press the MENU button again.
The [INPUT] screen is displayed.
3. Move the cursor to an input terminal other
than [USB-A] and press the ENTER button.
The [VIEWER] will end.
TIP:
•
When using the remote controller, press the HDMI1 button etc. to end the [VIEWER].
99
6. Using the VIEWER
6-3. Slide screen operations
The following operations can be performed on the slide screen.
Button name
▶, PAGE ▽
◀, PAGE △
Description
Project the next picture.
Project the previous picture.
ENTER
Display the pointer (→). The pointer moves when you press the ▼▲◀▶ button. If
you press the ENTER button again, the pointer disappears.
Switch to the file list screen.
EXIT
MENU
Display the control bar.
On the control bar, press the ◀ / ▶ button to move the yellow cursor and press the ENTER button
at the desired item. The function of each item is as follows.
①
②
③
④
⑤
⑥
⑦
Items on the control bar
①Back
Description
Project the previous picture.
Start automatic playback of the slideshow. Or stop the slide show.
Project the next picture.
②Play / Stop
③Next
Rotate the picture clockwise by 90°.
Rotate the picture counter-clockwise by 90°.
Turn off the control bar.
④Rotate 90° to the right
⑤Rotate 90° to the left
⑥End
Switch to the thumbnail screen.
⑦Return to the file list screen
100
6. Using the VIEWER
6-4. File list screen operations
How to view the file list screen
②
①
③
④
⑤
Display name
Description
Display the path of the projected folder.
①Path
When a USB memory is inserted, the drive name is displayed as [USB].
Return to the folder at the upper (parent) level.
②To the upper level
Display pictures and folders as icons or thumbnails (zoom out).
③Picture or folder (icon display
or) thumbnail display
④Filename of the selected
picture
Display the file name of the picture corresponding to the cursor
•
When the cursor is on a picture, the order of the picture (the number
out of all the pictures), the latest date and time the picture was up-
dated, and the file size are displayed.
⑤Information display
•
•
When the cursor is on a folder, the update date and time of the folder is
displayed.
When the cursor is on a drive, the free space of the drive is displayed.
101
6. Using the VIEWER
File list screen operations
Button name
Description
▼▲◀▶
ENTER
Move the cursor.
•
If the cursor is on a picture, the display switches to the slide screen.
If the cursor is on a folder, the files in the folder are displayed.
If the cursor is on [UP DIRECTORY], the display returns to the folder in
the upper (parent) level.
•
•
EXIT
Return to the folder at the upper (parent) level.
Display the following pop-up menu.
Display the next file list screen.
MENU
PAGE ▽
PAGE △
Display the previous file list screen.
Menu item
Description
PLAY
Start the slideshow.
LOGO
Change the screen of the input terminal in a signal-less state (background
logo) or the background image of the MultiPresenter start-up screen
(MultiPresenter logo).
REMOVE USB DEVICE
OPTIONS
Disable the use of the USB memory inserted in the projector. Execute this
menu item before removing the USB memory from the projector.
Display the option menu. (→ next page)
102
6. Using the VIEWER
6-5. Option menu
When shipped from the
factory
Menu item
PLAY MODE
Description
Select the display mode of the slide screen.
MANUAL: Switch the picture manually.
AUTOMATIC: Switch the picture automatically according
to the interval setting.
MANUAL
INTERVAL
REPEAT
Set the display interval when playing a slideshow auto-
matically.
Selectable range: Set the interval from 5–300 (seconds)
by 1 second increment.
5 (seconds)
OFF
Repeat the slideshow.
•
OFF: Do not repeat. End the slideshow after the last
picture is displayed.
•
ON: Repeat. Return to the first picture after the last
picture is displayed.
START
Set the screen to be displayed when the USB-A terminal
is selected.
SLIDE
OFF
•
•
SLIDE: Display the slide screen.
THUMBNAILS: Display the list screen.
THUMBNAILS
Set whether to display the thumbnails of picture files
displayed in the file list screen.
•
•
OFF: Display as icons.
ON: Display as thumbnails.
Example
SORT
Set the sort order when the file list is displayed.
NAME (ABC..)
•
•
•
•
NAME (ABC..)/NAME (ZYX..): Display in the order of the
character codes of the files and folder names.
EXT. (ABC..)/EXT. (ZYX..): Display in the order of the
character codes of the extensions.
DATE (NEW)/DATE (OLD): Display the file update date/
time in ascending or descending order.
SIZE (BIG)/SIZE (SMALL): Display in ascending or
descending order of file size.
TIP:
•
About “Save Setting”
Save each setting immediately after pressing the Confirm button. However, the value set in [SORT] is maintained until the power
is turned off, returning to [NAME (ABC..)] the next time the power is turned on.
103
6. Using the VIEWER
6-6. Changing the logo data (background image)
• You can change the screen of the input terminal in a signal-less state (background logo) or the
background image of the MultiPresenter start-up screen (MultiPresenter logo).
• You can also set a password to prohibit third parties from changing the pictures.
• You can set pictures that satisfy all of the following conditions.
Format
Resolution
JPEG or PNG pictures that can be displayed with the [VIEWER]
Below the panel resolution of the projector
P525UL: WUXGA (1920 × 1200)
P525WL: WXGA (1280 × 800)
File size
1 megabyte or less
1. Display the file list screen.
2. Move the cursor to the picture to set
in the background logo or the Multi-
Presenter logo and press the MENU
button.
The pop-up menu will be displayed.
3. Move the cursor to [LOGO] and press
the ENTER button.
The sub-menu will be displayed.
① Setting the background logo or MultiPresenter logo
1. Move the cursor to [SET TO BACKGROUND LOGO] or [SET TO MultiPresenter LOGO] in the
sub-menu and press the ENTER button.
•
If a [LOGO PASSWORD] has been set, enter the [LOGO PASSWORD] when the [LOGO PASS-
WORD] input screen appears.
•
A screen to confirm whether to change the logo or not is displayed.
2. Move the cursor to [YES] and press the ENTER button.
② Initializing the background logo or MultiPresenter logo
1. Move the cursor to [RESET BACKGROUND LOGO] or [RESET MultiPresenter LOGO] and
press the ENTER button.
•
If a [LOGO PASSWORD] has been set, enter the [LOGO PASSWORD] when the [LOGO PASS-
WORD] input screen appears.
•
A screen to confirm whether to initialize the logo or not is displayed.
2. Move the cursor to [YES] and press the ENTER button.
104
6. Using the VIEWER
③ Set a password so that the logo will not be changed without authorization
This section explains the procedure for setting the password for the first time.
1. Move the cursor to [LOGO PASSWORD] in the sub-menu and press the ENTER button.
The [PASSWORD SETTINGS] screen is displayed.
2. Move the cursor to [NEW PASSWORD] and press the ENTER button.
•
The character input screen will be displayed. Enter the password using the ▲▼◀▶ buttons
and press the ENTER button.
•
•
Only 1–10 alphanumeric characters are allowed to be used in the password.
When the password is entered, it will be indicated by asterisks in the entry field.
3. Move the cursor to [CONFIRM NEW PASSWORD] and press the ENTER button.
Enter the same password again.
•
4. Move the cursor to [OK] on the password setting screen and press the ENTER button.
The [LOGO PASSWORD] will be set.
TIP:
•
How to erase the set [LOGO PASSWORD]
①
②
③
Move the cursor to [LOGO PASSWORD] in the sub-menu and press the ENTER button.
Press the ENTER button in the [ENTER PASSWORD] screen.
Enter the password, move the cursor to [OK] and press the ENTER button.
The [PASSWORD SETTINGS] screen will be displayed.
④
⑤
⑥
Move the cursor to [NEW PASSWORD] and press the ENTER button.
•
Move the cursor to [OK] without entering anything in the character input screen and press the ENTER button.
Move the cursor to [CONFIRM NEW PASSWORD] and press the ENTER button.
Move the cursor to [OK] without entering anything in the character input screen and press the ENTER button.
•
Move the cursor to [OK] in the password setting screen and press the ENTER button.
The set [LOGO PASSWORD] will now be deleted.
105
7. Connecting to a Network
7-1. Things you can do by connecting the projector to a network
•
You can send screen images via a wired LAN/wireless LAN from a terminal installed with our
MultiPresenter app to the projector and project them onto a screen.
See our company’s website for more details about MultiPresenter.
https://www.nec-display.com/dl/en/soft/multipresenter/index.html
A
C
B
D
Simultaneous display
Simultaneous connection
C
A
B
E
D
Send
Send
Send
Send
Stop
•
When connecting the projector using a wireless LAN, you can set the following 3 profiles under
the [NETWORK SETTINGS] in the menu.
Profile name
Description
INTELLIGENT CONNECTION
Easily connect computers or tablet terminals installed with Multi-
Presenter to the projector in a peer-to-peer connection.
INFRASTRUCTURE
Connect the projector to an existing access point and connect
computers or tablet terminals installed with MultiPresenter to the
projector.
SIMPLE ACCESS POINT
Turn the projector into the [SIMPLE ACCESS POINT] to connect
computers or tablet terminals installed with MultiPresenter to the
projector.
•
•
•
Multiple computers or tablet terminals can be connected at the same time. A maximum of 16
units can be connected in the [FREE] mode and a maximum of 50 units can be connected in
the [MANAGED] mode.
Using the web browser of a computer and tablet terminal connected to a wired LAN/wireless
LAN, you can connect to the projector's HTTP server to control the projector or configure the
[NETWORK SETTINGS].
By configuring the network service settings of the projector, AMX beacon, Extron XTP, HTTP
server logon password, PJLink, ALERT MAIL, CRESTRON, etc., can be used.
106
7. Connecting to a Network
7-2. Connecting to MultiPresenter
Preparations:
•
•
When connecting the projector to a wired LAN, connect a LANcable to the unit. (→ page 86)
When connecting the projector to a wireless LAN, install a separately-sold LAN unit in the unit.
(→ page 88)
•
•
Configure the [NETWORK SETTINGS] of the projector. (→ page 109)
Install the MultiPresenter app in the computer or tablet terminal.
https://www.nec-display.com/dl/en/soft/multipresenter/index.html
The procedure is described here for each wireless LAN profile [INTELLIGENT CONNECTION], [INFRA-
STRUCTURE], and [SIMPLE ACCESS POINT].
① When connecting with an [INTELLIGENT CONNECTION]
1. Turn on the power of the projector and press the APPS button on the remote controller.
The start-up screen of MultiPresenter is displayed.
2. Start MultiPresenter.
The target device screen is displayed.
3. Enter the 4-digit PIN code displayed in the start-up screen in the target device screen.
When connection with the projector is completed, the screen of the computer or tablet terminal
is projected on the screen.
107
7. Connecting to a Network
② When connecting with [INFRASTRUCTURE]
1. Turn on the power of the projector and press the APPS button on the remote controller.
The start-up screen of MultiPresenter is displayed.
2. Connect the projector and your computer or tablet terminal to the same network.
NOTE:
•
Check with the network administrator for the “connection information”of the network to be connected.
3. Start MultiPresenter.
The target device screen is displayed.
4. Enter the 4-digit PIN code displayed in the start-up screen in the target device screen.
When connection with the projector is completed, the screen of the computer or tablet terminal
is projected on the screen.
③ When connecting with a [SIMPLE ACCESS POINT]
1. Turn on the power of the projector and press the APPS button on the remote controller.
The start-up screen of MultiPresenter is displayed.
2. Connect your computer or tablet terminal to the access point matching the“SSID”displayed
in the start-up screen.
3. Start MultiPresenter.
The target device screen is displayed.
4. Enter the 4-digit PIN code displayed in the start-up screen in the target device screen.
When connection with the projector is completed, the screen of the computer or tablet terminal
is projected on the screen.
108
7. Connecting to a Network
7-3. NETWORK SETTINGS
Move the cursor to [ NETWORK SETTINGS] at the bottom right of the start-up screen and press
the ENTER button to display the [NETWORK SETTINGS] screen.
①
②
③
④
⑤
⑥
① INFORMATION
Displays information regarding the wired LAN and wireless LAN of the projector.
• To return to the [NETWORK SETTINGS] screen, press the EXIT button.
② NAME
Sets the [PROJECTOR NAME] and [HOST NAME].
Item name
Description
PROJECTOR NAME
Set the [PROJECTOR NAME].
•
Initial value: “PJ-XXXXXXXXXX”
The initial value “PJ-XXXXXXXXXX”represents the “PJ-”+ “Serial Number”.
Allowable characters: Alphanumeric symbols (including space)
Number of characters: 1–16 characters
•
•
HOST NAME
Set the [HOST NAME].
•
Initial value: “pj-XXXXXXXXXX”
The initial value “pj-XXXXXXXXXX”represents the “pj-”+ “Serial Number”.
Allowable characters: Alphanumeric, “-”
•
NOTE:
•
You can not enter “-”at the beginning or end of the [HOST NAME].
•
Number of characters: 1–16 characters
③ WIRED LAN
Configure the profile of the wired LAN, DHCP, IP address, subnet mask, gateway, DNS and so on.
• When using a wired LAN, set the profile to [ENABLE] and configure the necessary settings.
• If you are not using a wired LAN, set the profile to [DISABLE].
• Once you have configured the settings, move the cursor to [OK] and press the ENTER button.
109
7. Connecting to a Network
④ WIRELESS LAN
Configure the wireless LAN settings.
Item name
PROFILE
Description
There are 4 wireless LAN profiles as shown below.
•
•
•
•
DISABLE (initial value)
INTELLIGENT CONNECTION
SIMPLE ACCESS POINT
INFRASTRUCTURE
The settings of profiles are different from each other. This will be explained later.
[DISABLE]
Disable the [WIRELESS LAN] of the projector.
[INTELLIGENT CONNECTION]
Compared to connecting with [INFRASTRUCTURE] or the [SIMPLE ACCESS POINT], it is easier to
connect computers or tablet terminals installed with MultiPresenter to the projector.
Item name
PROFILE
MODE
Description
INTELLIGENT CONNECTION
Select the wireless mode (IEEE802.11b/g/n or IEEE802.11a/n).
Initial value: IEEE802.11b/g/n
Set the wireless channel.
Initial value: AUTOMATIC
Set the [SECURITY TYPE] ([DISABLE] or [WPA2-PSK]).
Initial value: DISABLE
•
CHANNEL
SECURITY TYPE
•
•
NOTE:
•
When the [PIN TYPE] set in the MultiPresenter settings is a [ONE-TIME], the [SECURITY TYPE]
cannot be specified as it will be applied automatically.
SECURITY KEY
Set the encryption key.
•
•
•
Initial value: Blank
Allowable characters: Alphanumeric symbols (including space)
Number of characters: 8–63 characters
When a [SECURITY KEY] is set, a number of asterisks “*”equivalent to the num-
ber of characters is displayed.
NOTE:
•
When the [PINTYPE] set in the MultiPresenter settings is a [ONE-TIME], the [SECURITY KEY] cannot
be set as it will be set automatically.
110
7. Connecting to a Network
[SIMPLE ACCESS POINT]
Turn the projector into the [SIMPLE ACCESS POINT] to connect computers or tablet terminals installed
with MultiPresenter to the projector.
Item name
PROFILE
Description
SIMPLE ACCESS POINT
Select the wireless mode (IEEE802.11b/g/n or IEEE802.11a/n).
Initial value: IEEE802.11b/g/n
Set the wireless channel.
Initial value: AUTOMATIC
Set the SSID.
MODE
CHANNEL
SSID
•
•
•
Initial value: “AP-XXXXXXXXXX”
The initial value “AP-XXXXXXXXXX”represents the “AP-”+ “Serial Number”.
Allowable characters: Alphanumeric symbols (including space)
Number of characters: 1–32 characters
•
•
SECURITY TYPE
SECURITY KEY
Set the [SECURITY TYPE] ([DISABLE] or [WPA2-PSK]).
Initial value: DISABLE
Set the encryption key.
•
•
•
•
Initial value: Blank
Allowable characters: Alphanumeric symbols (including space)
Number of characters: 8–63
When the character [SECURITY KEY] is set, a number of asterisks “*”equivalent
to the number of characters is displayed.
[INFRASTRUCTURE]
Connect the projector to an existing access point.
Item name
Description
PROFILE
INFRASTRUCTURE
DHCP, IP ADDRESS,
SUBNET MASK, GATE-
WAY, AUTO DNS, DNS
ADDRESS
Set the [DHCP], [IP ADDRESS], [SUBNET MASK], [GATEWAY], [AUTO DNS], and [DNS
ADDRESS].
SITE SURVEY
Perform a site survey to search for access points.
The [SSID] and [SECURITY TYPE] are set according to the selected access point.
Set the SSID.
SSID
•
•
•
Initial value: NECPJ
Allowable characters: Alphanumeric symbols (including space)
Number of characters: 1–32 characters
SECURITY TYPE
SECURITY KEY
Set the [SECURITY TYPE] ([DISABLE], [WPA2-PSK], or [WPA/WPA2-PSK]).
Initial value: DISABLE
Set the encryption key.
•
•
•
•
Initial value: Blank
Allowable characters: Alphanumeric symbols (including space)
Number of characters: 8–63 characters
When a [SECURITY KEY] is set, a number of asterisks “*”equivalent to the num-
ber of characters is displayed.
111
7. Connecting to a Network
⑤ MultiPresenter
Set the MultiPresenter operation.
Item name
Description
Select [FREE] mode or [MANAGED] mode.
MODE
When you are in the [MANAGED] mode, you can change the split pattern of the
screen by pressing the ENTER button on the remote controller of the projector
while projecting the MultiPresenter screen.
•
Initial value: FREE
NOTE:
The [MODE] setting is applied when all connections are cut off.
•
PIN TYPE
PIN CODE
Select [ONE-TIME] or [STATIC].
•
•
Initial value: ONE-TIME
A [ONE-TIME] PIN code will be generated automatically, so the [PIN CODE] can-
not be entered for the next item.
•
For [STATIC], enter an arbitrary PIN code.
Enter a PIN code for [STATIC].
•
•
•
Initial value: 4-digit random number
Allowable characters: Numeral
Number of characters: 4 characters (0000–9999)
UTILIZE PIN CODE AS
CONNECTION PASS-
WORD
Select not to use the PIN code as a password ([OFF]), or to use the PIN code as a
password ([ON]).
•
Initial value: ON
COMMUNICATION
SPEED LIMIT
Set the upper limit of the communication speed that MultiPreseter uses for trans-
mission.
•
Initial value: DISABLE
START-UP SCREEN
GET APPS GUIDE
Select whether or not to display the [GET MultiPresenter] display on the start-up
screen.
•
Initial value: ON (display)
Select whether or not to display the connection procedure on the start-up screen.
Initial value: ON (display)
STEP TO CONNECT
•
CONNECTION INFOR-
MATION
Select whether or not to display the connection information on the start-up
screen.
•
Initial value: ON (display)
MultiPresenter SCREEN
CONNECTION INFOR-
MATION
Select whether or not to display the connection information in the screen when
MultiPresenter is connected.
•
Initial value: ON (display)
112
7. Connecting to a Network
⑥ NETWORK SERVICE
Configure the [AMX BEACON], [Extron XTP], [HTTP SERVER], [PJLink], [ALERT MAIL], [CRESTRON]
and other settings.
Item name
AMX BEACON
Description
Select whether or not to transmit AMX beacons.
•
Initial value: OFF (do not transmit)
Choose whether to enable or disable the connection with the Extron XTP device.
Initial value: OFF (disable)
Set the password to log into the projector’s HTTP server.
Extron XTP
•
HTTP SERVER
•
•
•
Initial value: Blank
Allowable characters: Alphanumeric symbols
Number of characters: 0–10 characters
When a password is set, a number of asterisks “*”equivalent to the number of
characters is displayed.
PJLink
Set the PJLink password.
PASSWORD SETTINGS
Set the PJLink password.
•
•
•
Initial value: Blank
Allowable characters: Alphanumeric characters
Number of characters: 0–32 characters
When a password is set, a number of asterisks “*”equiva-
lent to the number of characters is displayed.
ALERT MAIL
Set alert mail and perform a transmission test.
ALERT MAIL
Select whether or not to send an alert mail when an alert
target event occurs in the projector.
Initial value: OFF (do not transmit)
•
SENDER'S ADDRESS
Set the sender’s address when sending E-mail from the
projector.
•
•
Initial value: Blank
Allowable characters: Alphanumeric characters, sym-
bols
•
Number of characters: 0–60 characters
SMTP SERVER NAME
Set the SMTP server of the network to connect to the
projector.
•
•
Initial value: Blank
Allowable characters: Alphanumeric characters, sym-
bols
•
Number of characters: 0–60 characters
RECIPIENT'S ADDRESS Set the destination address to send E-mail from the
1/2/3
projector (maximum 3).
•
•
Initial value: Blank
Allowable characters: Alphanumeric characters, sym-
bols
•
Number of characters: 0–60 characters
TEST MAIL
Send a test mail according to the settings.
113
7. Connecting to a Network
Item name
CRESTRON
Description
Set the CRESTRON function.
Crestron Room View
Crestron Room View
Select whether to use Crestron Room View or not.
•
Initial value: OFF (do not use)
Crestron Control
Crestron Control
IP ADDRESS
Select whether to use Crestron Control or not.
Initial value: OFF (do not use)
Set the Crestron Control’s IP address.
•
•
•
•
Initial value: 192.168.0.100
Allowable characters: Alphanumeric, period
Number of characters: 7–15 characters
IP ID
Set the Crestron Control’s IP ID.
•
•
•
•
Initial value: 5
Allowable characters: Alphanumeric
Input character range: 3–65535
Number of characters: 1–5 characters
114
7. Connecting to a Network
7-4. HTTP server function
Overview
The HTTP Server function provides settings and operations for:
•
Setting for wired/wireless network (NETWORK SETTINGS)
To use wireless LAN connection, the optional USB Wireless LAN Unit is required. (→ page 88)
To use wired/wireless LAN connection, connect the projector to the computer with a commer-
cially available LAN cable. (→ page 86)
•
Setting Alert Mail (ALERT MAIL)
When the projector is connected to a wired/wireless network, the light source usage time or
error messages will be sent via e-mail.
•
•
Operating the projector
Power on/off, selecting input, volume control and picture adjustments are possible.
Configure the [AMX BEACON], [Extron XTP], [HTTP SERVER], [PJLink], [ALERT MAIL], [CRESTRON]
and other settings.
How to access to the HTTP server:
•
Start the Web browser on the computer via the network connected to the projector and
enter the following URL :
http://<the projector’s IP address>/index.html
TIP:
The factory setting IP address is [DHCP: ON].
•
NOTE:
•
•
To use the projector in a network, consult with your network administrator about network settings.
The display’s or button’s response can be slowed down or operation may not be accepted depending the settings of your network.
Should this happen, consult your network administrator.The projector may not respond if its buttons are repeatedly pressed in rapid
intervals. Should this happen, wait a moment and repeat. If you still can’t get any response, turn off and back on the projector.
If the [NETWORK SETTINGS] screen does not appear in the web browser, press the Ctrl+F5 keys to refresh your web browser (or
clear the cache).
•
•
This device uses “JavaScript”and “Cookies”and the browser should be set to accept these functions. The setting method will vary
depending on the version of browser. Please refer to the help files and the other information provided in your software.
Preparation before Use
Connect the projector to a commercially available LAN cable before engaging in browser opera-
tions. (→ page 86)
Operation with a browser that uses a proxy server may not be possible depending on the type of
proxy server and the setting method. Although the type of proxy server will be a factor, it is possible
that items that have actually been set will not be displayed depending on the effectiveness of the
cache, and the contents set from the browser may not be reflected in operation. It is recommended
that a proxy server not be used unless it is unavoidable.
115
7. Connecting to a Network
Handling of the Address for Operation via a Browser
Regarding the actual address that is entered for the address or entered to the URL column when
operation of the projector is via a browser, the host name can be used as it is when the host name
corresponding to the IP address of the projector has been registered to the domain name server
by a network administrator, or the host name corresponding to the IP address of the projector has
been set in the “HOSTS”file of the computer being used.
Example 1: When the host name of the projector has been set to “pj.nec.co.jp”, access is gained to
the network setting by specifying
http://pj.nec.co.jp/index.html
for the address or the entry column of the URL.
Example 2: When the IP address of the projector is “192.168.73.1”, access is gained to the network
setting by specifying
http://192.168.73.1/index.html
for the address or the entry column of the URL.
PROJECTOR ADJUSTMENT
POWER
This controls the power of the projector.
ON
OFF
Power is switched on.
Power is switched off.
VOLUME
AV-MUTE
This controls the volume of the projector.
▲
▼
Increases the volume adjustment value.
Decreases the volume adjustment value.
This controls the mute function of the projector.
PICTURE ON
PICTURE OFF
SOUND ON
SOUND OFF
ALL ON
Mutes the video.
Cancels the video muting.
Mutes the audio.
Cancels the audio muting.
Mutes each of the video, and audio functions.
Cancels the muting of each of the video, and audio functions.
ALL OFF
116
7. Connecting to a Network
PICTURE
Controls the video adjustment of the projector.
CONTRAST ▲
CONTRAST ▼
BRIGHTNESS ▲
BRIGHTNESS ▼
SHARPNESS ▲
SHARPNESS ▼
COLOR ▲
Increases the contrast adjustment value.
Decreases the contrast adjustment value.
Increases the brightness adjustment value.
Decreases the brightness adjustment value.
Increases the sharpness adjustment value.
Decreases the sharpness adjustment value.
Increases the color adjustment value.
Decreases the color adjustment value.
Increases the hue adjustment value.
COLOR ▼
HUE ▲
HUE ▼
Decreases the hue adjustment value.
•
The functions that can be controlled will vary depending on the signal being input to the projec-
tor. (→ page 57)
This switches the input terminal of the projector.
SOURCE SELECT
HDMI1
Switches to the HDMI 1 IN terminal
HDMI2
COMPUTER
HDBaseT
Switches to the HDMI 2 IN terminal.
Switches to the COMPUTER IN terminal.
Switch to image input sent from a transmission device that supports
HDBaseT.
USB-A
LAN
Switches to the data on the USB memory device.
Switches to a LAN signal.
PROJECTOR STATUS
LOG OFF
This displays the condition of the projector.
LIGHT HOURS USED
ERROR STATUS
Displays how many hours the light module has been used.
Displays the status of errors occurring within the projector.
Logging off your projector and returning to the authentication screen (LOGON screen).
117
7. Connecting to a Network
NETWORK SETTINGS
For details on each of the [NETWORK SETTINGS], see “7-3. NETWORK SETTINGS”(→ page 109).
118
8. Maintenance
8-1. Cleaning the Lens
•
•
•
•
Turn off the projector before cleaning.
The projector has a plastic lens. Use a commercially available plastic lens cleaner.
Do not scratch or mar the lens surface as a plastic lens is easily scratched.
Never use alcohol or glass lens cleaner as doing so will cause damage to the plastic lens surface.
WARNING
•
Do not use a spray containing flammable gas to remove dust attached to the lens, etc. Doing
so may result in fire.
119
8. Maintenance
8-2. Cleaning the Cabinet
Turn off the projector, and unplug the projector before cleaning.
•
Use a dry soft cloth to wipe dust off the cabinet.
If heavily soiled, use a mild detergent.
•
•
Never use strong detergents or solvents such as alcohol or thinner.
When cleaning the ventilation slits or the speaker using a vacuum cleaner, do not force the
brush of the vacuum cleaner into the slits of the cabinet.
Vacuum the dust off the ventilation slits or the speaker.
•
Poor ventilation caused by dust accumulation in ventilation openings can result in overheating
and malfunction. These areas should be cleaned regularly.
•
•
Do not scratch or hit the cabinet with your fingers or any hard objects
Contact your dealer for cleaning the inside of the projector.
NOTE:
•
Do not apply volatile agent such as insecticide on the cabinet, the lens, or the screen. Do not leave a rubber or vinyl product in
prolonged contact with it. Otherwise the surface finish will be deteriorated or the coating may be stripped off.
120
9. Appendix
9-1. Setting Up the Screen and the Projector
Use this to get a general idea of what the screen size will be when set in a certain position, what
size screen you will need, and what distance you will need to project images of the desired size.
The projection distance range at which focusing is possible is 0.78 m to 12.89 m. Install within this
range.
(inch)
When zoom lever turned to wide
300
When zoom
lever turned to
telescopic
240
200
180
150
120
100
80
60
40
30
0
1
2
3
4
5
6
7
8
9
10
11
12
13 (m)
[Projection distance]
With tilt feet tilted 4° when set to wide
When zoom lever
turned to wide
(m)
5
When zoom lever turned to telescopic
4
3
2
1
Screen center line
(telescopic)
1
2
3
4
5
6
7
8
9
10
11
12
13 (m)
0
Projector lens center
Screen center line (wide)
*
The figures indicated for “height of screen from projector lens center” on the projection distance table are
for a lens shift of 60% V.
Reading the Table
From the upper table on this page, to project wide images on a 150 screen, install at about 4.0 m
from the front.
Also, from the lower table we can see that about 2.2 m are required from the projector’s lens center
to the upper edge of the screen. Use this to see whether or not enough height can be provided
from the projector to the ceiling and for installing the screen. The diagram shows the projection
distance when the projector is installed horizontally. The projected image can be moved up and
down, left and right using the lens shift function. (→ page 23)
121
9. Appendix
Tables of screen sizes and dimensions
Screen size
(diagonal)
Screen height
Screen width
Screen width
Screen height
Size (inches)
(cm)
64.6
86.2
(inches)
25.4
33.9
(cm)
40.4
53.8
(inches)
15.9
21.2
30
40
50
60
80
100
120
150
200
250
300
107.7
129.2
172.3
215.4
258.5
323.1
430.8
538.5
646.2
42.4
50.9
67.8
84.8
101.8
127.2
169.6
212.0
254.4
67.3
80.8
26.5
31.8
42.4
53.0
63.6
79.5
106.0
132.5
159.0
107.7
134.6
161.5
201.9
269.2
336.5
403.9
122
9. Appendix
Example of installation on a desktop
The diagram below shows an example of when the projector is used on a desktop.
Horizontal projection position: Equal distance to the left and right from the center of the lens
Vertical projection position: (see table below)
Screen surface
Lens center
Lower edge of screen with 61.6% V
Measurement +H
Measurement -H
Approximately 78 to 87 mm
Lower edge of screen with 0% V
Projection distance L
(NOTE) Height from lens center to lower edge of screen (with tilt feet screwed in)
Throw distance L
Height H
Screen size
(inches)
(m)
(inches)
(cm)
–
–
–
–
–
–
–
–
–
–
–
–
–
–
(inches)
Wide
0.77
1.03
1.56
2.10
2.36
2.63
3.16
3.96
4.76
5.30
6.36
7.16
7.96
Tele
1.26
1.69
2.55
3.41
3.84
4.27
5.13
6.43
7.72
8.58
10.30
11.59
12.89
Wide
30.1
40.6
61.6
82.6
Tele
49.5
66.5
0%V
−20.2
−26.9
−40.4
−53.8
−60.6
−67.3
−80.8
−101.0
−121.2
−134.6
−161.5
−181.7
−201.9
60%V
0%V
–
–
–
–
–
–
–
–
–
–
–
–
–
–
60%V
30
40
60
80
90
100
120
150
180
200
250
270
300
+4.0
+5.4
+8.1
−7.9
−10.6
−15.9
−21.2
−23.8
−26.5
−31.8
−39.7
−47.7
−53.0
−63.6
−71.5
−79.5
+1.6
+2.1
+3.2
+4.2
+4.8
+5.3
+6.4
+7.9
+9.5
+10.6
+12.7
+14.3
+15.9
100.4
134.3
151.3
168.2
202.1
253.0
303.8
337.8
405.6
456.4
507.3
+10.8
+12.1
+13.5
+16.2
+20.2
+24.2
+26.9
+32.3
+36.3
+40.4
93.1
103.6
124.6
156.1
187.6
208.6
250.5
282.0
313.5
123
9. Appendix
Lens shifting range
This projector is equipped with a lens shift function (→ page 23) for adjusting the image position
using dials. Lens shifting is possible within the range shown below.
NOTE:
•
In case lens shifted volume exceeds the below illustrated range, blur and shade may appear around ends of projected image.
Legend: V “Vertical” refers to the screen height and H “Horizontal” refers to the screen width. The
lens shift range is expressed as a ratio of height and width, respectively.
Lens shifting range:
Vertical direction: +60%, −0%
Horizontal direction: 29%
DESKTOP FRONT, DESKTOP REAR
29%H
100%H
29%H
Width of projected
image
60%V
100%V
Height of projected
image
CEILING FRONT, CEILING REAR
100%V
60%V
Height of projected
image
Width of projected
image
29%H
100%H
29%H
(Example) When using to project on a 150" screen
According to the “Table of screen sizes and dimensions” (→ page 122), H = 127.2"/323.1 cm, V =
79.5"/201.9 cm.
Adjustment range in the vertical direction: the projected image can be moved upwards 0.60 ×
79.5"/201.9 cm ≈ 47.7"/121 cm (when the lens is at the center position).
Adjustment range in the horizontal direction: the projected image can be moved to the left 0.29 ×
127.2"/323.1 cm ≈ 36.9"/94 cm, to the right approximately 36.9"/94 cm.
*
Figures differ by several % because the calculation is approximate.
124
9. Appendix
9-2. Compatible Input Signal List
Analog RGB
Resolution
Refresh Rate
Signal
(dots)
Aspect Ratio
(Hz)
VGA
SVGA
XGA
640 × 480
800 × 600
4:3
4:3
4:3
15:9
16:10
16:9
16:9
4:3
60/72/75/85/iMac
56/60/72/75/85/iMac
60/70/75/85/iMac
1024 × 768
1280 × 768
1280 × 800
1360 × 768
1366 × 768
1280 × 960
1280 × 1024
1400 × 1050
1440 × 900
1600 × 900
1600 × 1200
1680 × 1050
1280 × 720
1920 × 1080
1920 × 1200 *4 *5
640 × 480
832 × 624
1024 × 768
1152 × 870
1280 × 1024
1
1
2
2
WXGA
*
*
*
*
60
60
60
60
Quad-VGA
SXGA
SXGA+
WXGA+
WXGA++
UXGA
WSXGA+
HD
Full HD
WUXGA
MAC 13"
MAC 16"
MAC 19"
MAC 21"
MAC 23"
60/75
60/75
60
60
60
60
60
60
60
60
67
75
75
75
65
5:4
4:3
16:10
16:9
4:3
16:10
16:9
16:9
16:10
4:3
4:3
4:3
4:3
5:4
2
3
*
*
Component
Refresh Rate
(Hz)
Signal
Format
Aspect Ratio
HDTV (1080p)
HDTV (1080i)
HDTV (720p)
SDTV (480p)
SDTV (576p)
SDTV (480i)
SDTV (576i)
1920 × 1080
1920 × 1080
1280 × 720
720 × 480
720 × 576
720 × 480
720 × 576
16:9
16:9
16:9
4:3/16:9
4:3/16:9
4:3/16:9
4:3/16:9
50/60
50/60
50/60
60
50
60
50
125
9. Appendix
HDMI
Resolution
(dots)
Refresh Rate
Signal
Aspect Ratio
(Hz)
VGA
SVGA
XGA
640 × 480
800 × 600
1024 × 768
1280 × 768
1280 × 800
1366 × 768
1280 × 960
1280 × 1024
1400 × 1050
1440 × 900
1600 × 900
1680 × 1050
1920 × 1200
3840 × 2160
1920 × 1080
1920 × 1080
1280 × 720
720 × 480
720 × 576
720 × 480
720 × 576
4:3
4:3
4:3
15:9
16:10
16:9
4:3
5:4
4:3
16:10
16:9
16:10
16:10
16:9
16:9
16:9
60
60
60
60
60
60
60
60
60
60
60
60
1
1
WXGA
*
*
Quad-VGA
SXGA
SXGA+
WXGA+
WXGA++
WSXGA+
WUXGA
4
*
60
4K
23.98/24/25/29.97/30
HDTV (1080p)
HDTV (1080i)
HDTV (720p)
SDTV (480p)
SDTV (576p)
SDTV(480i)
SDTV(576i)
50/60
50/60
50/60
60
50
60
16:9
4:3/16:9
4:3/16:9
4:3/16:9
4:3/16:9
50
*1 Native resolution on P525WL
*2 The projector may fail to display these signals correctly when [AUTO] is selected for [ASPECT RATIO] in the
on-screen menu.
The factory default is [AUTO] for [ASPECT RATIO]. To display these signals, select [16:9] for [ASPECT RATIO].
*3 WXGA MODE: OFF
*4 Native resolution on P525UL
*5 WXGA MODE: ON
Depending on your player or disc, the projected image may not be displayed correctly.
The projector does not support HDCP 2.2, 4K/60p or HDR.
126
9. Appendix
9-3. Specifications
This section provides technical information about projector’s performance.
Model name
P525UL
P525WL
Method
Three primary color liquid crystal shutter projection method
Specifications of main parts
Liquid crystal
panel
Size
Pixels (*1)
0.64" (with MLA) × 3 (aspect ratio: 16:10)
2,304,000 (1920 dots × 1200
lines)
1,024,000 (1280 dots × 800 lines)
Projection lenses
F = 2.0, f = 18.2–31.1 mm
Manual (Zoom Ratio = 1.7)
Manual
Zoom
Focus
Lens shifting
H: 29%, V: +60%, −0%
Blue Laser Diode
Light source
Optical device
Light output (*2) (*3)
Optical isolation by dichroic mirror, combining by dichroic prism
5,000 lm
Contrast ratio (*2) (all white/all black)
Screen size (throw distance)
Projection Angle
500,000:1 with dynamic contrast
30 to 300 inches (0.8–12.9 m)
From 0 to 17.2 deg at 60"
Color reproducibility
Scanning frequency
10-bit color processing (approx. 1.07 billion colors)
Analog: 15 to 100 kHz (24 kHz or greater for RGB inputs), conform-
ing to VESA standards
Digital: 15 kHz, 24 to 153 kHz, conforming to VESA standards
Analog: 48 Hz, 50 to 85 Hz, 100, 120 Hz conforming to VESA stan-
dards
Horizontal
Vertical
Digital: 24, 25, 30, 48 Hz, 50 to 85 Hz, 100, 120 Hz conforming to
VESA standards
Main adjustment functions
Manual zoom, manual focus, manual lens shift, input signal switch-
ing (HDMI1/HDMI2/COMPUTER/HDBaseT/USB-A/LAN), auto image
adjustment, picture maginification, muting (video), power on/
standby, on-screen display/selection, etc.
Max. display resolution (horizontal ×
vertical)
Analog: 1920 × 1200 (handled with Advanced AccuBlend)
Digital: 3840 × 2160 (handled with Advanced AccuBlend)
Input signals
R,G,B,H,V
RGB: 0.7 Vp-p/75 Ω
Y: 1.0 Vp-p/75 Ω (with Negative Polarity Sync)
Cb, Cr (Pb, Pr): 0.7 Vp-p/75 Ω
H/V Sync: 4.0 Vp-p/TTL
Composite Sync: 4.0 Vp-p/TTL
Sync on G: 1.0 Vp-p/75 Ω (with Sync)
Y: 1.0 Vp-p/75 Ω (with Sync)
Component
Cb, Cr (Pb, Pr): 0.7 Vp-p/75 Ω
DTV: 480i, 480p, 720p, 1080i, 1080p (60 Hz)
576i, 576p, 720p, 1080i, 1080p (50 Hz)
DVD: Progressive signal (50/60 Hz)
Stereo L/R: 0.5 Vrms/22 kΩ or over
Audio
Input/output terminals
Computer/Com- Video input
Mini D-Sub 15-pin × 1
ponent
Audio
Audio input
Output
Stereo mini Jack × 1
Stereo mini Jack × 1 (Selected from: Computer/HDMI)
127
9. Appendix
Model name
P525UL
P525WL
HDMI
Video input
HDMI® Terminal type A × 2
Deep Color (color depth): 8-/10-/12-bit compatible
Colorimetry: RGB, YcbCr444 and YcbCr422 compatible
LipSync compatible, HDCP compatible (*4)
Audio input
Video input
HDMI: Sampling frequency – 32/44.1/48 kHz, Sampling bits –
16/20/24 bits
RJ-45 × 1, 100BASE-TX compatible
Deep Color (color depth): Support 8/10/12 bits
Colorimetry: Support RGB, YCbCr444 and YCbCr422
Support LipSync , HDCP (*4)
Ethernet/
HDBaseT port
Audio input
Sampling frequency: 32/44.1/48 kHz
Sampling bit: 16/20/24 bit
USB port
LAN port
USB type A × 1, 5.0 V/2.0 A power supply
RJ-45 × 1, Supports 100BASE-TX
USB type A × 1
Wireless LAN Port (Optional)
Control Terminals
RS-232C terminal (PC control)
Built-in Speaker
Usage environment
D-Sub 9-pin × 1
20 W (monaural)
Operating temperature: 5 to 40°C (*5)
Operating humidity: 20 to 80% (with no condensation)
Storage temperature: −10 to 50°C (*5)
Storage humidity: 20 to 80% (with no condensation)
Operating altitude: 0 to 2600 m/8500 feet
(Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at
altitudes approximately 5500 feet/1700 meters or higher.)
100–240 V AC, 50/60 Hz
Power supply
Power ECO
consump- MODE
tion
OFF
330 W (100–130 V) /
320 W (200–240 V)
240 W (100–130 V) /
238 W (200–240 V)
242 W (100–130 V) /
240 W (200–240 V)
320 W (100–130 V) /
312 W (200–240 V)
232 W (100–130 V) /
230 W (200–240 V)
234 W (100–130 V) /
232 W (200–240 V)
ECO
LONG LIFE
STANDBY NORMAL
0.13 W (100–130 V) / 0.19 W (200–240 V)
1.4 W (100–130 V) / 1.6 W (200–240 V)
MODE
NETWORK
STANDBY
Rated input current
5.1 A (100–130 V AC) –
2.1A (200–240 V AC)
10 A or higher (*6)
5.0 A (100–130 V AC) –
2.1A (200–240 V AC)
Power cord specification
External dimensions
18.9" (width) × 4.8" (height) × 16" (depth)/
480 (width) × 122 (height) × 407 (depth) mm (not including protru-
sions)
18.9" (width) × 5.6" (height) × 16" (depth)/
480 (width) × 142.5 (height) × 407 (depth) mm (including protru-
sions)
Weight
21.4 lbs (9.7 kg)
*1 Effective pixels are more than 99.99%.
*2 Compliance with ISO21118-2012
128
9. Appendix
*3 This is the light output value (lumens) when the [ECO MODE] is set to [OFF] and [PRESET] is set to [HIGH-
BRIGHT]. The brightness decreases when [ECO MODE] is set to [ECO] or [LONG LIFE] ([ECO]: About 60%,
[LONG LIFE]: About 50%). If any other mode is selected as the [PRESET] mode, the light output value may
drop slightly.
*4 If you are unable to view material via the HDMI input and HDBaseT input, this does not necessarily mean the
projector is not functioning properly. With the implementation of HDCP technology, there may be cases in
which certain content is protected with HDCP and might not be displayed due to the decision/intention of
the HDCP community (Digital Content Protection, LLC).
Video: Deep Color; 8/10/12-bit, LipSync
Audio: LPCM; up to 2 ch, sample rate 32/44.1/48 KHz, sample bit; 16/20/24-bit
*5 35 to 40°C – “Forced eco mode”
*6 In UK, use a BS-approved power cord with molded plug having a black (15 A) fuse installed for use with this
projector.
•
These specifications and the product’s design are subject to change without notice.
For additional information visit:
US: https://www.necdisplay.com/
Europe: https://www.nec-display-solutions.com/
Global: https://www.nec-display.com/global/index.html
For information on our optional accessories, visit our website or see our brochure.
The specifications are subject to change without notice.
129
9. Appendix
9-4. Cabinet Dimensions
Unit: mm (inch)
480 (18.9)
Lens center
149.7 (5.9)
Lens center
149.7 (5.9)
110 (4.3)
250 (9.8)
130
9. Appendix
9-5. Pin assignments and signal names of main terminals
COMPUTER IN Terminal (Mini D-Sub 15 Pin)
Connection and signal level of each pin
Pin No.
RGB Signal (Analog)
YCbCr Signal
11 12 13 14 15
10
1
2
3
Red
Cr
Y
6
7
8
9
1
2
3
4
5
Green or Sync on Green
Blue
Cb
4
Ground
Signal Level
Video signal : 0.7Vp-p (Analog)
Sync signal : TTL level
5
6
7
8
Ground
Red Ground
Green Ground
Blue Ground
Cr Ground
Y Ground
Cb Ground
9
Hot Plug
10
11
12
13
Sync Signal Ground
No Connection
Bi-directional DATA (SDA)
Horizontal Sync or Composite
Sync
14
15
Vertical Sync
Data Clock
HDMI 1 IN/HDMI 2 IN Terminal (Type A)
Pin No.
Signal
TMDS Data 2+
TMDS Data 2 Shield
TMDS Data 2−
TMDS Data 1+
TMDS Data 1 Shield
TMDS Data 1−
TMDS Data 0+
TMDS Data 0 Shield
TMDS Data 0−
TMDS Clock +
TMDS Clock Shield
TMDS Clock−
2
4
6
8 10 12 14 16 18
7 9 11 13 15 17 19
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
1
3
5
CEC
Disconnection
SCL
SDA
DDC/CEC grounding
+5 V power supply
Hot plug detection
131
9. Appendix
Ethernet/HDBaseT/LAN Port (RJ-45)
Pin No.
Signal
1
2
3
4
5
6
7
8
TxD+/HDBT0+
TxD−/HDBT0−
RxD+/HDBT1+
Disconnection/HDBT2+
Disconnection/HDBT2−
RxD−/HDBT1−
1
2
3
4
5
6
7
8
Disconnection/HDBT3+
Disconnection/HDBT3−
USB Port (Type A)
Pin No.
Signal
1
2
3
4
VBUS
D−
D+
Grounding
1
2
3
4
PC CONTROL Port (D-Sub 9 Pin)
Pin No.
Signal
9
8
7
6
1
2
3
4
5
6
7
8
9
Unused
RxD reception data
TxD transmission data
Unused
Grounding
5
4
3
2
1
Unused
RTS transmission request
CTS transmission allowed
Unused
132
9. Appendix
9-6. PC Control Codes and Cable Connection
PC Control Codes
Function
Code Data
00H
POWER ON
POWER OFF
02H
02H
02H
02H
02H
02H
02H
02H
02H
02H
02H
02H
00H
01H
03H
03H
03H
03H
03H
03H
10H
11H
12H
13H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
02H
02H
02H
02H
02H
02H
00H
00H
00H
00H
02H
03H
01H
01H
01H
01H
01H
01H
12H
13H
14H
15H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
00H
INPUT SELECT COMPUTER
INPUT SELECT HDMI1
INPUT SELECT HDMI2
INPUT SELECT HDBaseT
INPUT SELECT USB-A
INPUT SELECT LAN
PICTURE MUTE ON
PICTURE MUTE OFF
SOUND MUTE ON
SOUND MUTE OFF
01H
09H
A9H
AAH
C7H
27H
28H
A1H
A2H
BFH
1FH
20H
NOTE:
•
Contact your local dealer for a full list of the PC Control Codes if needed.
Cable Connection
Communication Protocol
Baud rate
Data length
Parity
Stop bit
X on/off
38400 bps
8 bits
No parity
One bit
None
Communications procedure
Full duplex
NOTE:
•
Depending on the equipment, a lower baud rate may be recommended for long cable runs.
133
9. Appendix
PC Control Terminal (D-SUB 9P)
To TxD of PC
To RxD of PC
To GND of PC
1
2
3
4
5
6
7
8
9
To RTS of PC
To CTS of PC
NOTE:
•
•
•
Pins 1, 4, 6 and 9 are no used.
Jumper “Request to Send”and “Clear to Send”together on both ends of the cable to simplify cable connection.
For long cable runs it is recommended to set communication speed within projector menus to 9600 bps.
134
9. Appendix
9-7. About the ASCII Control Command
This device supports the common ASCII Control Command for controlling our projector and monitor.
Please visit our web site for detailed information about the command.
https://www.nec-display.com/dl/en/pj_manual/lineup.html
How to connect with an external device
There are two methods to connect the projector with an external device such as a computer.
1. Connection thru the serial port.
Connects the projector to a computer by a serial cable (a cross cable).
2. Connection via network (LAN)
Connects the projector to a computer by a LAN cable.
Concerning to the type of LAN cable, please ask to your network administrator.
Connection interface
1. Connection thru the serial port.
Communication Protocol
Item
Information
38400/19200/9600/4800 bps
Baud rate
Data length
Parity bit
8 bits
No parity
1 bit
Stop bit
Flow control
None
Communications procedure
Full duplex
2. Connection via network
Communication Protocol (Connection via LAN)
Item
Information
Communication speed
Supported standard
Set automatically (10/100 Mbps)
IEEE802.3 (10BASE-T)
IEEE802.3u (100BASE-TX, Auto-Negotiation)
Use the TCP port number 7142 for transmitting and receiving command.
Parameters for this device
Input command
Input terminal
HDMI1
HDMI2
COMPUTER
HDBaseT
USB-A
Response
hdmi1
hdmi2
computer
hdbaset
usb-a
Parameter
hdmi1 or hdmi
hdmi2
One among computer, computer1, vga, vga1, rgb, and rgb1
hdbaset or hdbaset1
usb-a or usb-a1
lan or lan1
LAN
lan
135
9. Appendix
Status command
Response
Error Status
error:temp
error:fan
Temperature error
Fan trouble
error:light
error:system
Light source trouble
System trouble
136
9. Appendix
9-8. Troubleshooting
This section helps you resolve problems you may encounter while setting up or using the projector.
Common Problems & Solutions
Problem
Check These Items
Does not turn on or shut
down
•
Check that the power cord is plugged in and that the power button on the projector cabinet or the
remote control is on. (→ pages 16, 18)
•
Check to see if the projector has overheated. If there is insufficient ventilation around the projector
or if the room where you are presenting is particularly warm, move the projector to a cooler location.
The light module may fail to light. Wait a full minute and then turn on the power again.
Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500
feet/1700 meters or higher. Using the projector at altitudes approximately 5500 feet/1700 meters
or higher without setting to [HIGH ALTITUDE] can cause the projector to overheat and the projector
could shut down. If this happens, wait a couple minutes and turn on the projector. (→ page 72)
If you turn on the projector immediately after the light module is turned off, the fans run without
displaying an image for some time and then the projector will display the image.Wait for a moment.
In case it’s hard to think the trouble is not caused on the above mentioned conditions, unplug the
power cord from the outlet. Then wait 5 minutes before plugging it in again. (→ page 31)
•
•
•
Will turn off
No picture
•
•
Ensure that the [OFF TIMER] or [AUTO POWER OFF] is off. (→ page 65, 76)
Check if the appropriate input is selected. (→ page 20) If there is still no picture, press the SOURCE
button or one of the source buttons again.
•
•
•
•
Ensure your cables are connected properly.
Use menus to adjust the brightness and contrast. (→ page 57)
Check that the AV-MUTE (image off) buttons are not pressed.
Reset the settings or adjustments to factory preset levels using the [RESET] in the Menu. (→ page
80)
•
•
Enter your registered keyword if the Security function is enabled. (→ page 41)
If the HDMI 1 IN or the HDMI 2 IN signal cannot be displayed, try the following.
-
Reinstall your driver for the graphics card built in your computer, or use the updated driver.
For reinstalling or updating your driver, refer to the user guide accompanied with your computer
or graphics card, or contact the support center for your computer manufacturer.
Install the updated driver or OS on your own responsibility.
We are not liable for any trouble and failure caused by this installation.
•
•
Signals may not be supported depending on the HDBaseT transmission device. IR and RS232C cannot
be used in certain cases as well.
Be sure to connect the projector and notebook PC while the projector is in standby mode and before
turning on the power to the notebook PC.
In most cases the output signal from the notebook PC is not turned on unless connected to the
projector before being powered up.
*
If the screen goes blank while using your remote control, it may be the result of the computer’s
screen-saver or power management software.
•
•
See also the page 139.
Picture suddenly becomes
dark
Check if the projector is in the Forced ECO mode because of too high ambient temperature.
137
9. Appendix
Problem
Check These Items
Color tone or hue is unusual
•
Check if an appropriate color is selected in [WALL COLOR]. If so, select an appropriate option. (→
page 64)
•
Adjust [HUE] in [PICTURE]. (→ page 57)
Image isn’t square to the
screen
•
•
Reposition the projector to improve its angle to the screen. (→ page 22)
Use the Keystone correction function to correct the trapezoid distortion. (→ page 28)
Picture is blurred
•
•
•
Adjust the focus. (→ page 25)
Reposition the projector to improve its angle to the screen. (→ page 22)
Ensure that the distance between the projector and screen is within the adjustment range of the
lens. (→ page 121)
•
•
Has the lens been shifted by an amount exceeding the guaranteed range? (→ page 124)
Condensation may form on the lens if the projector is cold, brought into a warm place and is then
turned on. Should this happen, let the projector stand until there is no condensation on the lens.
Image is scrolling vertically,
horizontally or both
•
•
Check the computer’s resolution and frequency. Make sure that the resolution you are trying to display
is supported by the projector. (→ page 125)
Adjust the computer image manually with the [HORIZONTAL]/[VERTICAL] in the [IMAGE OPTIONS].
(→ page 59)
Remote control does not
work
•
•
•
•
Install new batteries.(→ page 13)
Make sure there are no obstacles between you and the projector.
Stand within 23 feet (7 m) of the projector. (→ page 14)
The remote control sensor on the back of the projector cannot be used when the cable cover is mounted
on the projector.
•
When performing remote control operations via a transmission device compatible with HDBaseT, set
the [REMOTE SENSOR] to [HDBaseT] and the [STANDBY MODE] to [SLEEP].
Indicator is lit or blinking
Cross color in RGB mode
•
See the POWER/STATUS/LIGHT Indicator. (→ page 140)
•
•
Press the AUTO ADJ. button on the remote control. (→ page 30)
Adjust the computer image manually with [CLOCK]/[PHASE] in [IMAGE OPTIONS] in the menu. (→
page 58)
For more information contact your dealer.
138
9. Appendix
If there is no picture, or the picture is not displayed correctly.
• Power on process for the projector and the PC.
Be sure to connect the projector and notebook PC while the projector is in standby mode and
before turning on the power to the notebook PC.
In most cases the output signal from the notebook PC is not turned on unless connected to the
projector before being powered up.
NOTE:
•
You can check the horizontal frequency of the current signal in the projector’s menu under Information. If it reads “0kHz”, this
means there is no signal being output from the computer. (→ page 78 or go to next step)
• Enabling the computer’s external display.
Displaying an image on the notebook PC’s screen does not necessarily mean it outputs a signal
to the projector. When using a PC compatible laptop, a combination of function keys will enable/
disable the external display. Usually, the combination of the “Fn” key along with one of the 12
function keys gets the external display to come on or off. For example, NEC laptops use Fn + F3,
while Dell laptops use Fn + F8 key combinations to toggle through external display selections.
• Non-standard signal output from the computer
If the output signal from a notebook PC is not an industry standard, the projected image may
not be displayed correctly. Should this happen, deactivate the notebook PC’s LCD screen when
the projector display is in use. Each notebook PC has a different way of deactivate/reactivate the
local LCD screens as described in the previous step. Refer to your computer’s documentation for
detailed information.
• Image displayed is incorrect when using a Mac
When using a Mac with the projector, set the DIPswitch of the Mac adapter (not supplied with
the projector) according to your resolution. After setting, restart your Mac for the changes to take
affect.
For setting display modes other than those supported by your Mac and the projector, changing
the DIP switch on a Mac adapter may bounce an image slightly or may display nothing. Should
this happen, set the DIP switch to the 13" fixed mode and then restart your Mac. After that, restore
the DIP switches to a displayable mode and then restart the Mac again.
NOTE:
•
A Video Adapter cable manufactured by Apple Inc. is needed for a MacBook which does not have a mini D-Sub 15-pin terminal.
• Mirroring on a MacBook
* When using the projector with a MacBook, output may not be set to the display resolution of
the projector unless“mirroring”is off on your MacBook. Refer to owner’s manual supplied with
your Mac computer for mirroring.
• Folders or icons are hidden on the Mac screen
Folders or icons may not be seen on the screen. Should this happen, select [View] → [Arrange]
from the Apple menu and arrange icons.
139
9. Appendix
9-9. Indicator Message
Feature of each indicator
① POWER indicator
③ ② ①
This indicator informs the power status of the projector.
② STATUS indicator
Lights up/flashes when a button is pressed with the [CONTROL PANEL
LOCK] enabled, or when an error occurs in the projector.
③ LIGHT indicator
This indicator informs the state of light source, used time of the light
source.
Indicator Message (Status message)
POWER
STATUS
LIGHT
Projector status
Power is off
Off
Off
Off
Off
In the state of Standby ([STANDBY MODE] is [NORMAL])
In the state of Standby ([STANDBY MODE] is [NETWORK STANDBY])
In the state of Sleep
Orange
(Blink*1)
Off
Orange
(Light)
Off
Off
Off
Off
Off
Off
Off
Green
(Light)
Powered state ([ECO MODE] is [OFF])
Blue
(Light)
Green
(Light)
Powered state ([ECO MODE] is [ECO] or [LONG LIFE])
[OFF TIMER] is activated (Powered state)
Blue
(Light)
Green
(Blink*2)
Blue
(Blink*2)
Status varies
140
9. Appendix
POWER
STATUS
LIGHT
Projector status
Preparing for powering ON
Blue
(Blink*3)
Off
Off
*1 Repetition to light on for 1.5 seconds / off for 7.5 seconds
*2 Repetition to light on for 2.5 seconds / off for 0.5 seconds
*3 Repetition to light on for 0.5 seconds / off for 0.5 seconds
141
9. Appendix
Indicator Message (Error message)
POWER
STATUS
LIGHT
Projector status
Procedure
A button has been pressed while
the [CONTROL PANEL LOCK] is
Status varies activated.
The projector’s keys are locked.
The setting must be canceled to
operate the projector. (→ page
69)
Blue
(Light)
Orange
(Light)
ID numbers for the projector and
Check the control IDs (→ page 70)
the remote control do not match.
Network conflict
Both the built-in wired LAN and
the wireless LAN cannot be con-
nected to the same network at
the same time.
Blue
(Light)
Orange
(Blink*4)
Status varies
To use both built-in wired LAN
and wireless LAN at the same
time, connect them to different
networks.
NOTE: In the Standby condition,
the status indicator on the cabi-
net does not blink in orange even
if the network conflicts.
Temperature problem (In the
Forced ECO mode)
Ambient temteprature is high.
Lower the room temperature.
Blue
(Light)
Off
Off
Off
Orange
(Light)
Temperature problem
Hardware problem
Ambient temperature is out of
the operation temperature. Check
if any obstruction stays near the
exhaust vent.
Red
(Blink*3)
Off
Problem with the hardware.
Contact your dealer.
Status varies
Red
(Blink*3)
Error requiring service support
Contact your dealer or service
personnel. Make sure to check
and inform indicator status for
asking to repair.
Red
Status varies Status varies
(Light)
*3 Repetition to light on for 0.5 seconds / off for 0.5 seconds
*4 Repetition to light on for 0.5 seconds / off for 2.5 seconds
142
9. Appendix
When the thermal protector is activated:
When inside temperature of the projector becomes too high or low, the POWER indicator start to
red blink in a short cycle. After this happened, the thermal protector will activate and the projector
may be turned off.
In this case, please take the below measures:
• Pull out the power plug from the wall inlet.
• Place the projector in cool place if it has been placed in high ambient temperature.
• Clean the exhaust vent if dust has accumulated on.
• Leave the projector for about one hour until inside temperature gets lower.
143
9. Appendix
9-10. Setting the date and time in the projector
Set the current date and time and daylight saving time in the projector. When set, the date and time
appear in the upper right corner of the MultiPresenter start-up screen.
There are 2 ways of displaying the screen for [DATE AND TIME SETTINGS] as shown below.
1. Display the on-screen menu and select [SETUP] → [GENERAL] → [DATE AND TIME SETTINGS].
(NOTE: At this point, the input terminal switches to [LAN]. )
2. Switch the input terminal to [LAN], display the“MultiPresenter start-up screen”and select [TOOLS]
→ [DATE AND TIME].
Item name
TIME ZONE SETTINGS
Description
Set the time difference between the region where the projector is used and the UTC (Universal
Time, Coordinated).
•
•
Initial value: +00:00
When using the projector in Japan, set the time as [+09:00].
DATE AND TIME SETTINGS
SUMMER TIME SETTINGS
Sets the current date and time.
•
When shipped from the factory, the time is set to the UTC (Universal Time, Coordinated). By
setting the time zone of your area, the current date and time will be displayed.
When synchronizing the time with the NTP server on the network to obtain the correct time, set
[SYNCHRONIZE TO INTERNET TIME SERVER.] to [ENABLE]. Then enter the IP address of the NTP
server or the [HOST NAME] and perform [UPDATE].
•
Set the daylight saving time.
•
•
Set the daylight saving time setting to [ENABLE].
Set the start and end of the daylight saving time, as well as each item of the time difference.
144
9. Appendix
Important:
•
When a period of about 5 or more months has passed after disconnecting the power cord of the projector, the time will be initial-
ized and the clock function will stop. When initialized, the date becomes [01/01/2018] and the time becomes [00:00]. If the clock
function has stopped, configure the [DATE AND TIME SETTINGS] again.
NOTE:
When the [SUMMER TIME SETTINGS] is enabled, the same start date or end date specified in the daylight saving time cannot be
set for [DATE AND TIME SETTINGS].
•
145
9. Appendix
9-11. Troubleshooting Check List
Before contacting your dealer or service personnel, check the following list to be sure repairs are
needed also by referring to the“Troubleshooting”section in your user’s manual.This checklist below
will help us solve your problem more efficiently.
* Print this page and the next page for your check.
Frequency of occurrence:
□always □sometimes (How often? _________________________ ) □other ( _____________________ )
Power
□
□
No power (POWER indicator does not light blue). See also “Status
Indicator (STATUS)”.
Shut down during operation.
□
Power cord’s plug is fully inserted into the wall outlet.
□
□
□
Power cord’s plug is fully inserted into the wall outlet.
Main power switch is pressed to the ON position.
No power even though you press and hold the POWER button.
□
[AUTO POWER OFF] is turned off (only models with the [AUTO
POWER OFF] function).
□
[OFF TIMER] is turned off (only models with the [OFF TIMER]
function).
Video and Audio
□
□
□
No image is displayed from your PC or video equipment to the
projector.
Parts of the image are lost.
□
Still unchanged even though you press the AUTO ADJ. button.
□
Still no image even though you connect the projector to the PC
first, then start the PC.
□
Still unchanged even though you carry out [RESET] in the
projector’s menu.
□
Enabling your notebook PC’s signal output to the projector.
Image is shifted in the vertical or horizontal direction.
□
□
□
•
A combination of function keys will enable/disable the
external display. Usually, the combination of the “Fn” key
along with one of the 12 function keys turns the external
display on or off.
Horizontal and vertical positions are correctly adjusted on a
computer signal.
Input source’s resolution and frequency are supported by the
projector.
Some pixels are lost.
□
□
□
No image (blue or black background, no display).
Still no image even though you press the AUTO ADJ. button.
Still no image even though you carry out [RESET] in the projec-
tor’s menu.
Signal cable’s plug is fully inserted into the input terminal
A message appears on the screen.
( _____________________________________ )
The source connected to the projector is active and available.
Still no image even though you adjust the brightness and/or
the contrast.
Input source’s resolution and frequency are supported by the
projector.
□
Image is flickering.
□
□
Still unchanged even though you press the AUTO ADJ. button.
Still unchanged even though you carry out [RESET] in the
projector’s menu.
Image shows flickering or color drift on a computer signal.
Still unchanged even though you change [FAN MODE] from [HIGH
ALTITUDE] to [AUTO].
□
□
□
□
□
□
□
□
Image appears blurry or out of focus.
□
Still unchanged even though you checked the signal’s resolution
on PC and changed it to projector’s native resolution.
Still unchanged even though you adjusted the focus.
□
□
No sound.
□
□
□
Image is too dark.
□
Remains unchanged even though you adjust the brightness
and/or the contrast.
Image is distorted.
Audio cable is correctly connected to the audio input of the
projector.
Still unchanged even though you adjusted the volume level.
AUDIO OUT is connected to your audio equipment (only models
with the AUDIO OUT terminal).
□
□
□
Image appears to be trapezoidal (unchanged even though you
carry out the [KEYSTONE] adjustment).
Other
□
□
Remote control does not work.
Buttons on the projector cabinet do not work (only models with the
[CONTROL PANEL LOCK] function)
□
□
□
No obstacles between the sensor of the projector and the
□
remote control.
[CONTROL PANEL LOCK] is not turned on or is disabled in the
menu.
Projector is placed near a fluorescent light that can disturb the
infrared remote controls.
ID for the projector and for the remote are same.
□
Still unchanged even though you press and hold the INPUT
button over 10 seconds.
146
9. Appendix
In the space below please describe your problem in detail.
Information on application and environment where your projector is used
Projector
Installation environment
Screen size:
Model number:
inch
Serial No.:
Screen type: □White matte □ Beads □ Polarization
□Wide angle □ High contrast
Date of purchase:
Light module operating time (hours):
ECO MODE:
Throw distance:
feet/inch/m
Orientation: □ Ceiling mount □ Desktop
Power outlet connection:
□ OFF □ ECO
□ LONG LIFE
□
□
Connected directly to wall outlet
Connected to power cord extender or other (the number of
connected equipment ______________ )
Information on input signal:
Horizontal synch frequency
Vertical synch frequency
Synch polarity
[
[
] kHz
] Hz
□
Connected to a power cord reel or other (the number of
connected equipment ______________ )
H □ (+) □ (−)
V □ (+) □ (−)
Synch type
□ Separate □ Composite
□ Sync on Green
Computer
Manufacturer:
Model number:
Notebook PC □ / Desktop □
Native resolution:
Refresh rate:
STATUS Indicator:
Steady light
Flashing light
□ Orange □ Green
[
] cycles
Remote control model number:
Video adapter:
Other:
PC
Video equipment
VCR, DVD player, Video camera, Video game or other
Manufacturer:
Projector
DVD player
Model number:
Signal cable
NEC standard or other manufacturer’s cable?
Model number:
Distribution amplifier
Model number:
Switcher
Length:
inch/m
Model number:
Adapter
Model number:
147
9. Appendix
9-12. REGISTER YOUR PROJECTOR! (for residents in the United States,
Canada, and Mexico)
Please take time to register your new projector. This will activate your limited parts and labor war-
ranty and InstaCare service program.
Visit our web site at www.necdisplay.com, click on support center/register product and submit
your completed form online.
Upon receipt, we will send a confirmation letter with all the details you will need to take advantage
of fast, reliable warranty and service programs from the industry leader, NEC Display Solutions of
America, Inc.
148
© NEC Display Solutions, Ltd. 2018
7N952802
|