NEC NP ME361X User Manual

Projector

ME401W/ME361W/ME331W/ME301W

ME401X/ME361X/ME331X/ME301X

User’s Manual

Please visit our web site for User’s Manual in the latest version:

http//www.nec-display.com/dl/en/pj_manual/lineup.html

Model No.

NP-ME401W/NP-ME361W/NP-ME331W/NP-ME301W/NP-ME401X/NP-ME361X/NP-ME331X/NP-ME301X

Important Information

Safety Cautions

Precautions

Please read this manual carefully before using your NEC projector and keep the manual handy for future reference.

CAUTION

To turn off main power, be sure to remove the plug from power outlet.

The power outlet socket should be installed as near to the equipment as possible, and should be easily

accessible.

CAUTION

TO PREVENT SHOCK, DO NOT OPEN THE CABINET.

THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns the user that uninsulated voltage within the unit may be sufficient to cause electrical

shock. Therefore, it is dangerous to make any kind of contact with any part inside of the unit.

This symbol alerts the user that important information concerning the operation and maintenance of this

unit has been provided.

The information should be read carefully to avoid problems.

WARNING: TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

DO NOT USE THIS UNIT’S PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THE PRONGS

CAN BE FULLY INSERTED.

DOC Compliance Notice (for Canada only)

This Class B digital apparatus complies with Canadian ICES-003.

Machine Noise Information Regulation - 3. GPSGV,

The highest sound pressure level is less than 70 dB (A) in accordance with EN ISO 7779.

CAUTION

Avoid displaying stationary images for a prolonged period of time.

Doing so can result in these images being temporarily sustained on the surface of the LCD panel.

If this should happen, continue to use your projector. The static background from previous images will

disappear.

Disposing of your used product

In the European Union

EU-wide legislation as implemented in each Member State requires that used electrical and electronic prod-

ucts carrying the mark (left) must be disposed of separately from normal household waste. This includes

projectors and their electrical accessories or lamps. When you dispose of such products, please follow the

guidance of your local authority and/or ask the shop where you purchased the product.

After collecting the used products, they are reused and recycled in a proper way. This effort will help us

reduce the wastes as well as the negative impact such as mercury contained in a lamp to the human health

and the environment at the minimum level.

The mark on the electrical and electronic products only applies to the current European Union Member States.

Outside the European Union

If you wish to dispose of used electrical and electronic products outside the European union, please contact

your local authority and ask for the correct method of disposal.

For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household

waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in

accordance with legislation.

According the EU directive 2006/66/EC, the battery can’t be disposed improperly. The battery shall

be separated to collect by local service.

Important Information

WARNING TO CALIFORNIA RESIDENTS:

Handling the cables supplied with this product will expose you to lead, a chemical known to the State of California

to cause birth defects or other reproductive harm. WASH HANDS AFTER HANDLING.

RF Interference (for USA only)

WARNING

The Federal Communications Commission does not allow any modiﬁcations or changes to the unit EXCEPT those

speciﬁed by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regu-

lation could void your right to operate this equipment. This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in

a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio / TV technician for help.

For UK only: In UK, a BS approved power cord with moulded plug has a Black (ﬁve Amps) fuse installed for use with

this equipment. If a power cord is not supplied with this equipment please contact your supplier.

Important Safeguards

These safety instructions are to ensure the long life of your projector and to prevent ﬁre and shock. Please read them

carefully and heed all warnings.

Installation

• Do not place the projector in the following conditions:

- on an unstable cart, stand, or table.

- near water, baths, or damp rooms.

- in direct sunlight, near heaters, or heat radiating appliances.

- in a dusty, smoky or steamy environment.

- on a sheet of paper or cloth, rugs or carpets.

• If you wish to have the projector installed on the ceiling:

- Do not attempt to install the projector yourself.

- The projector must be installed by qualiﬁed technicians in order to ensure proper operation and reduce the risk

of bodily injury.

- In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance

with any local building codes.

- Please consult your dealer for more information.

• Do not install and store the projector in the below circumstances. Failure to do so may cause of malfunction.

- In powerful magnetic ﬁelds

- In corrosive gas environment

- Outdoors

Important Information

WARNING

•

Do not cover the lens with the lens cap or equivalent while the projector is on. Doing so can lead to melting of

the cap due to the heat emitted from the light output.

•

Do not place any objects, which are easily affected by heat, in front of the projection window. Doing so could

lead to the object melting from the heat that is emitted from the light output.

•

Do not use a spray containing flammable gas to get rid of accumulated dust and dirt on the filters and the

projection window. It may cause of fire.

Place the projector in a horizontal position

The tilt angle of the projector should not exceed 10 degrees, nor should the projector be installed in any way other

than the desktop and ceiling mount, otherwise lamp life could decrease dramatically.

10˚

Fire and Shock Precautions

• Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside your

projector. Allow at least 4 inches (10cm) of space between your projector and a wall.

• Do not try to touch the exhaust vent as it can become heated while the projector is turned on and immediately after

the projector is turned off. Parts of the projector may become temporarily heated if the projector is turned off with

the POWER button or if the AC power supply is disconnected during normal projector operation.

Use caution when picking up the projector.

• Prevent foreign objects such as paper clips and bits of paper from falling into your projector. Do not attempt to retrieve

any objects that might fall into your projector. Do not insert any metal objects such as a wire or screwdriver into your

projector. If something should fall into your projector, disconnect it immediately and have the object removed by a

qualiﬁed service personnel.

• Do not place any objects on top of the projector.

• Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or ﬁre.

• The projector is designed to operate on a power supply of 100-240V AC 50/60 Hz. Ensure that your power supply

ﬁts this requirement before attempting to use your projector.

• Do not look the lens while the projector is on. Serious damage to your eyes could result. The following label, that

is indicated near the lens-mounting-section on the projector cabinet, describes this projector is categorized in the

risk group 2 of IEC 62471-5: 2015. As with any bright source, do not stare into the beam, RG2 IEC 62471-5: 2015.

• Keep any items such as magnifying glass out of the light path of the projector. The light being projected from the

iii

Important Information

lens is extensive, therefore any kind of abnormal objects that can redirect light coming out of the lens, can cause

unpredictable outcome such as ﬁre or injury to the eyes.

• Do not place any objects, which are easily affected by heat, in front of a projector exhaust vent.

Doing so could lead to the object melting or getting your hands burned from the heat that is emitted from the exhaust.

• Do not splash water over the projector. Doing so can cause electrical shock or ﬁre. If the projector gets wet, turn

off the projector, unplug the power cord and have the projector serviced by a qualiﬁed service personnel.

• Handle the power cord carefully. A damaged or frayed power cord can cause electric shock or ﬁre.

- Do not use any power cord other than the one supplied with the projector.

- Do not bend or tug the power cord excessively.

- Do not place the power cord under the projector, or any heavy object.

- Do not cover the power cord with other soft materials such as rugs.

- Do not heat the power cord.

- Do not handle the power plug with wet hands.

• Turn off the projector, unplug the power cord and have the projector serviced by a qualiﬁed service personnel under

the following conditions:

- When the power cord or plug is damaged or frayed.

- If liquid has been spilled into the projector, or if it has been exposed to rain or water.

- If the projector does not operate normally when you follow the instructions described in this user’s manual.

- If the projector has been dropped or the cabinet has been damaged.

- If the projector exhibits a distinct change in performance, indicating a need for service.

• Disconnect the power cord and any other cables before carrying the projector.

• Turn off the projector and unplug the power cord before cleaning the cabinet or replacing the lamp.

• Turn off the projector and unplug the power cord if the projector is not to be used for an extended period of time.

• When using a LAN cable:

For safety, do not connect to the terminal for peripheral device wiring that might have excessive voltage.

CAUTION

• Do not use the adjustable tilt foot for purposes other than originally intended. Misuses such as gripping the tilt-

foot or hanging on the wall can cause damage to the projector.

• Select [HIGH] in Fan mode if you continue to use the projector for consecutive days. (From the menu, select

[SETUP] → [OPTIONS(1)] → [FAN MODE] → [HIGH].)

• Do not turn off the AC power for 60 seconds after the lamp is turned on and while the POWER indicator is blink-

ing blue. Doing so could cause premature lamp failure.

Remote Control Precautions

•

Handle the remote control carefully.

If the remote control gets wet, wipe it dry immediately.

Avoid excessive heat and humidity.

Do not short, heat, or take apart batteries.

Do not throw batteries into ﬁre.

If you will not be using the remote control for a long time, remove the batteries.

Ensure that you have the batteries’ polarity (+/−) aligned correctly.

Do not use new and old batteries together, or use different types of batteries together.

Dispose of used batteries according to your local regulations.

Note for Canadian Environmental Protection Act, 1999

The lamp(s) in this product contains mercury. Please dispose according to your local authority law.

FOR MORE INFORMATION, CONTACT:

NEC Display Solutions of America, Inc.

500 Park Boulevard, Suite 1100, Itasca, Illinois 60143-1248

TELEPHONE 800-836-0655

www.necdisplay.com

Important Information

Note for US Residents

The lamp in this product contains mercury. Please dispose according to Local, State or Federal Laws.

Lamp Replacement

• Use the speciﬁed lamp for safety and performance.

• To replace the lamp, follow all instructions provided on page 103.

• Be sure to replace the lamp and ﬁlter when the message [THE LAMP HAS REACHED THE END OF ITS USABLE

LIFE. PLEASE REPLACE THE LAMP AND FILTER.] appears. If you continue to use the lamp after the lamp has

reached the end of its usable life, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case.

Do not touch them as the pieces of glass may cause injury.

If this happens, contact your dealer for lamp replacement.

A Lamp Characteristic

The projector has a discharge lamp for special purposes as a light source.

A lamp has a characteristic that its brightness gradually decreases with age. Also repeatedly turning the lamp on

and off will increase the possibility of its lower brightness.

The actual lamp life may vary depending upon the individual lamp, the environmental conditions and usage.

CAUTION:

• DO NOT TOUCH THE LAMP immediately after it has been used. It will be extremely hot. Turn the projector off

and then disconnect the power cord. Allow at least one hour for the lamp to cool before handling.

• When removing the lamp from a ceiling-mounted projector, make sure that no one is under the projector. Glass

fragments could fall if the lamp has been burned out.

About High Altitude mode

•

Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1700 meters

or higher.

Using the projector at altitudes approximately 5500 feet/1700 meters or higher without setting to [HIGH ALTITUDE]

can cause the projector to overheat and the protector could shut down. If this happens, wait a couple minutes and

turn on the projector.

•

Using the projector at altitudes less than approximately 5500 feet/1700 meters and setting to [HIGH ALTITUDE]

can cause the lamp to overcool, causing the image to ﬂicker. Switch [FAN MODE] to [AUTO].

Using the projector at altitudes approximately 5500 feet/1700 meters or higher can shorten the life of optical com-

ponents such as the lamp.

About Copyright of original projected pictures:

Please note that using this projector for the purpose of commercial gain or the attraction of public attention in a venue

such as a coffee shop or hotel and employing compression or expansion of the screen image with the following func-

tions may raise concern about the infringement of copyrights which are protected by copyright law.

[ASPECT RATIO], [KEYSTONE], Magnifying feature and other similar features.

Turkish RoHS information relevant for Turkish market

EEE Yonetmeliğine Uygundur.

This device is not intended for use in the direct ﬁeld of view at visual display workplaces. To avoid incommoding

reﬂections at visual display workplaces this device must not be placed in the direct ﬁeld of view.

Important Information

Power management function

The projector has power management functions. To reduce power consumption, the power management functions (1

and 2) are factory preset as shown below. To control the projector from an external device via a LAN or serial cable

connection, use the on-screen menu to change the settings for 1 and 2.

1. STANDBY MODE (Factory preset: NORMAL)

To control the projector from an external device, select [NETWORK STANDBY] for [STANDBY MODE].

NOTE:

• When [NORMAL] is selected for [STANDBY MODE], the following terminals and functions will not work:

MONITOR OUT terminal, AUDIO OUT terminal, USB(PC) port, LAN functions, Mail Alert function, DDC/CI (Virtual Remote Tool).

Please refer to page 75 about details.

• When [NETWORK STANDBY] has been set for [STANDBY MODE] and the LAN has been in link-down condition for 3 minutes,

[STANDBY MODE] will transit into [NORMAL] automatically for the purpose to save the consumption power.

2. AUTO POWER OFF (Factory preset: 1 hour)

To control the projector from an external device, select [OFF] for [AUTO POWER OFF].

NOTE:

• When [1:00] is selected for [AUTO POWER OFF], you can enable the projector to automatically turn off in 60 minutes if there is

no signal received by any input or if no operation is performed.

Table of Contents

Important Information............................................................................................i

1. Introduction.......................................................................................................... 1

❶ What’s in the Box?......................................................................................................... 1

❷ Introduction to the Projector........................................................................................... 2

Features you’ll enjoy: ............................................................................................... 2

About this user’s manual.......................................................................................... 3

❸ Part Names of the Projector .......................................................................................... 4

Front/Top.................................................................................................................. 4

Rear ......................................................................................................................... 5

Top Features ............................................................................................................ 6

Terminal Panel Features .......................................................................................... 7

❹ Part Names of the Remote Control................................................................................ 8

Battery Installation ................................................................................................... 9

Remote Control Precautions .................................................................................... 9

Operating Range for Wireless Remote Control ........................................................ 9

2. Projecting an Image (Basic Operation)...............................................10

❶ Flow of Projecting an Image .........................................................................................10

❷ Connecting Your Computer/Connecting the Power Cord ..............................................11

❸ Turning on the Projector................................................................................................12

Note on Startup screen (Menu Language Select screen).......................................13

❹ Selecting a Source .......................................................................................................14

Selecting the computer or video source..................................................................14

❺ Adjusting the Picture Size and Position ........................................................................15

Adjust the Tilt Foot ..................................................................................................16

Zoom.......................................................................................................................17

Focus ......................................................................................................................17

❻ Correcting Keystone Distortion [KEYSTONE]...............................................................18

❼ Optimizing Computer Signal Automatically.................................................................. 20

Adjusting the Image Using Auto Adjust .................................................................. 20

❽ Turning Up or Down Volume ........................................................................................ 20

❾ Turning off the Projector............................................................................................... 21

❿ When Moving the Projector.......................................................................................... 22

3. Convenient Features..................................................................................... 23

❶ Turning off the Image and Sound................................................................................. 23

❷ Freezing a Picture........................................................................................................ 23

❸ Magnifying a Picture.................................................................................................... 23

❹ Changing Eco Mode/Checking Energy-Saving Effect ................................................. 24

Using Eco Mode [ECO MODE].............................................................................. 24

Checking Energy-Saving Effect [CARBON METER].............................................. 25

❺ Using 4-Point Corner to Correct Keystone Distortion [CORNERSTONE].................... 26

Cornerstone ........................................................................................................... 26

Pincushion ............................................................................................................. 28

❻

Preventing the Unauthorized Use of the Projector [SECURITY]....................................... 30

vii

Table of Contents

Operating Your Computer’s Mouse Functions from the Projector’s Remote Control

via the USB Cable (Remote Mouse Function)...........................................................33

❼

❽ Projecting Your Computer’s Screen Image from the Projector via the USB Cable

(USB Display) ........................................................................................................ 34

❾ Controlling the Projector by Using an HTTP Browser.................................................. 36

❿ Projecting an Image from an Angle (Geometric Correction Tool in Image Express

Utility Lite) .............................................................................................................. 43

What you can do with GCT.................................................................................... 43

Projecting an Image from an Angle (GCT)............................................................. 43

4. Using the Viewer............................................................................................. 45

❶ What you can do with the Viewer................................................................................. 45

❷ Projecting images stored in a USB memory device..................................................... 47

5. Using On-Screen Menu................................................................................ 53

❶ Using the Menus.......................................................................................................... 53

❷ Menu Elements............................................................................................................ 54

❸ List of Menu Items ....................................................................................................... 55

❹ Menu Descriptions & Functions [SOURCE]................................................................. 58

HDMI1 and HDMI2................................................................................................. 58

COMPUTER .......................................................................................................... 58

VIDEO.................................................................................................................... 58

USB-A.................................................................................................................... 58

LAN........................................................................................................................ 58

USB-B.................................................................................................................... 58

❺ Menu Descriptions & Functions [ADJUST] .................................................................. 59

[PICTURE] ............................................................................................................. 59

[IMAGE OPTIONS] ................................................................................................ 62

[AUDIO].................................................................................................................. 66

❻ Menu Descriptions & Functions [SETUP].................................................................... 67

[GENERAL]............................................................................................................ 67

[MENU] .................................................................................................................. 69

[INSTALLATION] .................................................................................................... 71

[OPTIONS(1)] ........................................................................................................ 73

[OPTIONS(2)] ........................................................................................................ 75

Setting up the Projector for a Wired LAN Connection [WIRED LAN] ..................... 78

Setting up the Projector for a Wireless LAN Connection (with the optional USB

Wireless LAN Unit equipped) [WIRLESS LAN]...................................................... 79

❼ Menu Descriptions & Functions [INFO.] ...................................................................... 81

[USAGE TIME] ....................................................................................................... 81

[SOURCE(1)] ......................................................................................................... 82

[SOURCE(2)] ......................................................................................................... 82

[WIRED LAN]......................................................................................................... 82

[WIRELESS LAN] .................................................................................................. 83

[CONNECTION]..................................................................................................... 83

[VERSION]............................................................................................................. 83

[OTHERS] .............................................................................................................. 84

❽ Menu Descriptions & Functions [RESET].................................................................... 85

Returning to Factory Default [RESET] ................................................................... 85

viii

Table of Contents

6. Installation and Connections................................................................... 86

❶ Setting Up the Screen and the Projector ..................................................................... 86

Selecting a Location............................................................................................... 86

Throw Distance and Screen Size........................................................................... 88

❷ Making Connections.................................................................................................... 90

Connecting Your Computer .................................................................................... 90

Connecting an External Monitor............................................................................. 92

Connecting Your DVD Player or Other AV Equipment............................................ 93

Connecting Component Input ................................................................................ 94

Connecting HDMI Input.......................................................................................... 95

Connecting to a Wired LAN.................................................................................... 96

Connecting to a Wireless LAN (Optional: NP05LM series) .................................... 97

7. Maintenance .....................................................................................................100

❶ Cleaning the Filters.....................................................................................................100

❷ Cleaning the Lens.......................................................................................................102

❸ Cleaning the Cabinet..................................................................................................102

❹ Replacing the Lamp and the Filters............................................................................103

8. Appendix..............................................................................................................108

❶ Troubleshooting ..........................................................................................................108

Indicator Messages...............................................................................................108

Common Problems & Solutions ............................................................................109

If there is no picture, or the picture is not displayed correctly................................110

❷ Speciﬁcations ............................................................................................................. 111

❸ Cabinet Dimensions ...................................................................................................113

❹ Pin Assignments of D-Sub COMPUTER Input Terminal.............................................114

❺ Compatible Input Signal List.......................................................................................115

❻ PC Control Codes and Cable Connection ..................................................................116

❼ Using the Computer Cable (VGA) to Operate the Projector (Virtual Remote Tool) .....117

❽ Troubleshooting Check List.........................................................................................119

❾ REGISTER YOUR PROJECTOR! (for residents in the United States, Canada, and

Mexico) .................................................................................................................121

1. Introduction

❶ What’s in the Box?

Make sure your box contains everything listed. If any pieces are missing, contact your dealer.

Please save the original box and packing materials if you ever need to ship your projector.

Projector

Batteries (AAA × 2)

Remote control

(7N901053)

Lens cap (24F53711)

Power cord

(US: 7N080236/7N080242)

(EU: 7N080022/7N080028)

Computer cable (VGA)

(7N520089)

Strap × 1

(24J41711)

For North America only

Limited warranty

For customers in Europe:

You will ﬁnd our current valid

Guarantee Policy on our Web

Site:

NEC Projector CD-ROM

User’s manual (PDF)

(7N952531)

www.nec-display-solutions.com

• Important Infomation (7N8N7551)

• Quick Setup Guide (7N8N7561)

Unless otherwise described in the user’s manual, the drawings for the projector cabinet show examples of the ME361W.

1. Introduction

❷ Introduction to the Projector

This section introduces you to your new projector and describes the features and controls.

Features you’ll enjoy:

•

Quick start (6 seconds*¹), Quick Power Off, Direct Power Off

6 seconds*¹after turning on the power, the projector is ready to display PC or video images.

The projector can be put away immediately after the projector is powered down. No cool down period is required

after the projector is turned off from the remote control or cabinet control panel.

The projector has a feature called “Direct Power Off”. This feature allows the projector to be turned off (even when

projecting an image) by using the Main Power Switch or disconnecting the AC power supply.

To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and

a breaker.

The quick start time is only when [STANDBY MODE] is set to [NETWORK STANDBY] in the on-screen mes-

sage.

•

0.23W(100-130 V AC)/0.45W (200-240 V AC) in standby condition with energy saving technology

Selecting [NORMAL] for [STANDBY MODE] from the menu can put the projector in power-saving mode that

consumes only 0.23W(100-130 V AC)/0.45W (200-240 V AC).

Carbon Meter

This feature will show energy-saving effect in terms of CO₂emission reduction (kg) when the projector’s [ECO

MODE] is set to [AUTO ECO], [NORMAL], or [ECO].

The amount of CO₂emission reduction will be displayed in the conﬁrmation message at the time of power-off and

in the INFO of the on-screen menu.

•

Lamp life up to 9000 hours*²

Using in Eco Mode (ECO) allows you to prolong the projector’s lamp life up to 9000 hours (up to 4000 hours in

ECO MODE OFF).

•

Two HDMI inputs support digital signals

The two HDMI inputs provide HDCP compatible digital signals. The HDMI input also supports audio signal.

Integrated RJ-45 terminal for wired networking capability along with wireless networking capabilities

An RJ-45 terminal is standard. An optional USB Wireless LAN Unit is required for wireless LAN connection.

Smart Connection

It enables easily to connect your projector to computers or smartphones, on which the application software, Mul-

tiPresenter, has been installed, by inputting PIN code.

•

20 W built-in speaker for an integrated audio solution

Powerful 20 watt monaural speaker provides volume need for large rooms.

The supplied remote control allows you to assign a CONTROL ID to the projector

Multiple projectors can be operated separately and independently with the same single remote control by assigning

an ID number to each projector.

•

USB Display

Using a commercially available USB cable (compatible with USB 2.0 speciﬁcations) to connect the computer with

the projector allows you to send your computer screen image to the projector without the need of a traditional

computer cable (VGA).

1. Introduction

•

Convenient utility software (User Supportware)

This projector supports our utility software (NaViSet Administrator 2, Virtual Remote Tool, etc.) NaViSet Admin-

istrator 2 helps you control the projector by a computer via wired LAN connection. Virtual Remote Tool helps you

perform operations by a virtual remote control such as projector's power on or off and signal selection via wired

LAN connection. Moreover, it has function to send an image to the projector and register it as the logo data.

Image Express Utility Lite (for Windows) can be started from a commercially available USB memory or SD card

without the need of installing on your computer.

Please visit our web site for downloading each software.

URL: http://www.nec-display.com/dl/en/index.html

AUTO POWER ON and AUTO POWER OFF features

•

The DIRECT POWER ON, AUTO POWER ON, AUTO POWER OFF, and OFF TIMER features eliminate the need

to always use the POWER button on the remote control or projector cabinet.

Preventing unauthorized use of the projector

Enhanced smart security settings for keyword protection, cabinet control panel lock, security slot, and security

chain opening to help prevent unauthorized access, adjustments and theft deterrence.

High resolution up to WUXGA*³

High resolution display - up to WUXGA compatible, XGA (ME401X/ME361X/ME331X/ME301X)/WXGA (ME401W/

ME361W/ME331W/ME301W) native resolution.

•

An image with higher or lower resolution than the projector’s native resolution (ME401W/ME361W/ME331W/

ME301W: 1280 × 800 / ME401X/ME361X/ME331X/ME301X: 1024 × 768) will be displayed with Advanced

AccuBlend.

When WXGA MODE is set to ON.

•

CRESTRON ROOMVIEW compatibility

The projector supports CRESTRON ROOMVIEW, allowing multiple devices connected in the network to be man-

aged and controlled from a computer or controller.

About this user’s manual

The fastest way to get started is to take your time and do everything right the ﬁrst time. Take a few minutes now to

review the user’s manual. This may save you time later on. At the beginning of each section of the manual you’ll ﬁnd

an overview. If the section doesn’t apply, you can skip it.

1. Introduction

❸ Part Names of the Projector

Front/Top

Zoom Lever

(→ page 17)

Controls

(→ page 6)

Focus Ring

(→ page 17)

Exhaust Vent

Heated air is exhausted from here.

Intake Vent / Filter Cover

(→ page 100, 106)

Lens

Remote Sensor

(→ page 9)

Adjustable Tilt Foot Lever

(→ page 16)

Adjustable Tilt Foot

(→ page 16)

Lens Cap

For protecting lens.

Make sure to take it off during

projection.

1. Introduction

Rear

As the theft and dropping-off

Lamp Cover (→ page 103)

prevention measure, ﬁx on the sup-

plied strap.

Monaural Speaker (20 W)

Terminal Panel (→ page 7)

Built-in Security Slot ( )*

Rear Foot (→ page 16)

AC Input

Connect the supplied power cord’s

three-pin plug here, and plug the

other end into an active wall outlet.

(→ page 11)

Security chain opening

Attach an anti-theft device.

The security chain opening ac-

cepts security wires or chains up to

0.18 inch/4.6 mm in diameter.

* This security slot supports the MicroSaver ^®Security System.

1. Introduction

Top Features

1, 2

(POWER) Button

(→ page 12, 21)

2. POWER Indicator

(→ page 11, 12, 21, 108)

3. STATUS Indicator

(→ page 108)

4. LAMP Indicator

(→ page 103, 108)

5. ECO Button

(→ page 24)

6. SOURCE Button

(→ page 14)

7. AUTO ADJ. Button

(→ page 20)

8. MENU Button

(→ page 53)

9. ▲▼◀▶ / Volume Buttons ◀▶ / Keystone Buttons

(→ page 18, 20, 26, 53)

10. ENTER Button

(→ page 53)

11. EXIT Button

(→ page 53)

1. Introduction

Terminal Panel Features

1. COMPUTER IN/ Component Input Terminal (Mini

D-Sub 15 Pin)

(→ page 90, 92, 94)

2. COMPUTER AUDIO IN Mini Jack (Stereo Mini)

(→ page 90, 91, 93)

3. HDMI 1 IN Terminal (Type A)

(→ page 90, 91, 95)

4. HDMI 2 IN Terminal (Type A)

(→ page 90, 91, 95)

5. USB (PC) Port (Type B)

(→ page 90)

6. MONITOR OUT (COMPUTER) Terminal (Mini D-

Sub 15 Pin)

(→ page 92)

7. AUDIO OUT Mini Jack (Stereo Mini)

(→ page 92)

8. VIDEO IN Terminal (RCA)

(→ page 93)

9. VIDEO AUDIO IN L/MONO, R (RCA)

(→ page 93)

10. LAN Port (RJ-45)

(→ page 96)

11. USB Port (Type A)

For USB memory or optional Wireless LAN unit

(→ page 97)

12. PC CONTROL Port (D-Sub 9 Pin)

(→ page 116)

Use this port to connect a PC or control system.

This enables you to control the projector using serial

communication protocol. If you are writing your own

program, typical PC control codes are on page 116.

1. Introduction

❹ Part Names of the Remote Control

1. Infrared Transmitter

19. MENU Button

(→ page 9)

(→ page 53)

2. POWER ON Button

20. EXIT Button

(→ page 12)

(→ page 53)

3. POWER STANDBY Button

21. ▲▼◀▶ Button

(→ page 21)

(→ page 53)

4. SOURCE Button

22. ENTER Button

(→ page 14)

(→ page 53)

5. COMPUTER 1 Button

23. D-ZOOM (+)(–) Button

(→ page 14)

(→ page 23, 24)

6. COMPUTER 2 Button

(This button does not work in this

series of projectors)

24. MOUSE L-CLICK Button*

(→ page 33)

25. MOUSE R-CLICK Button*

7. AUTO ADJ. Button

(→ page 33)

(→ page 20)

26. PAGE ▽/△ Button

8. HDMI 1 Button

(→ page 33)

(→ page 14)

27. ECO Button

9. HDMI 2 Button

(→ page 24)

(→ page 14)

28. KEYSTONE Button

10. DisplayPort Button

(This button does not work in this

series of projectors)

(→ page 18, 26)

29. PICTURE Button

(→ page 59, 61)

11. VIDEO Button

30. VOL. (+)(–) Button

(→ page 14)

(→ page 20)

12. USB-A Button

31. ASPECT Button

(→ page 14, 47, 58)

(→ page 64)

13. USB-B Button

32. FOCUS/ZOOM Button

This does not work on this series

of projectors.

(→ page 14, 33, 58, 90)

14. LAN Button

(→ page 14)

33. HELP Button

15. ID SET Button

(→ page 81, 85, 105)

(→ page 72)

16. Numeric Keypad Button/

CLEAR Button

(→ page 72)

17. FREEZE Button

(→ page 23)

18. AV-MUTE Button

(→ page 23)

The MOUSE L-CLICK and MOUSE R-CLICK buttons work only when a USB cable is connected with your computer.

1. Introduction

Battery Installation

1. Press ﬁrmly and slide the bat-

tery cover off.

2. Install new batteries (AAA). En-

sure that you have the batteries’

polarity (+/−) aligned correctly.

3. Slip the cover back over the bat-

teries until it snaps into place.

Do not mix different types of

batteries or new and old batter-

ies.

OPEN

Remote Control Precautions

•

Handle the remote control carefully.

If the remote control gets wet, wipe it dry immediately.

Avoid excessive heat and humidity.

Do not short, heat, or take apart batteries.

Do not throw batteries into ﬁre.

If you will not be using the remote control for a long time, remove the batteries.

Ensure that you have the batteries’ polarity (+/−) aligned correctly.

Do not use new and old batteries together, or use different types of batteries together.

Dispose of used batteries according to your local regulations.

Operating Range for Wireless Remote Control

22 feet/7 m

30°

Remote control

Remote sensor on projector cabinet

Remote control

30°

22 feet/7 m

•

The infrared signal operates by line-of-sight up to a distance of about 22 feet/7 m and within a 60-degree angle of

the remote sensor on the projector cabinet.

The projector will not respond if there are objects between the remote control and the sensor, or if strong light falls

on the sensor. Weak batteries will also prevent the remote control from properly operating the projector.

2. Projecting an Image (Basic Operation)

This section describes how to turn on the projector and to project a picture onto the screen.

❶ Flow of Projecting an Image

Step 1

• Connecting your computer / Connecting the power cord (→ page 11)

Step 2

• Turning on the projector (→ page 12)

Step 3

• Selecting a source (→ page 14)

Step 4

• Adjusting the picture size and position (→ page 15)

• Correcting keystone distortion [KEYSTONE] (→ page 18)

Step 5

• Adjusting a picture and sound

Optimizing a computer signal automatically (→ page 20)

Turning up or down volume (→ page 20)

Step 6

• Making a presentation

Step 7

• Turning off the projector (→ page 21)

Step 8

• When Moving the Projector (→ page 22)

2. Projecting an Image (Basic Operation)

❷ Connecting Your Computer/Connecting the Power Cord

1. Connect your computer to the projector.

This section will show you a basic connection to a computer. For information about other connections, see “6.

Installation and Connections” on page 90.

Connect the computer cable (VGA) between the projector’s COMPUTER IN terminal and the computer’s port

(mini D-Sub 15 Pin). Turn two thumb screws of both terminals to ﬁx the computer cable (VGA).

2. Connect the supplied power cord to the projector.

First connect the supplied power cord’s three-pin plug to the AC IN of the projector, and then connect the other

plug of the supplied power cord in the wall outlet.

The projector’s power indicator will ﬂash for a few seconds and then will light red* (standby mode).

* This will apply for both indicators when [NORMAL] is selected for [STANDBY MODE]. See the Power Indicator

section.(→ page 108)

COMPUTER IN

Make sure that the prongs are fully

inserted into both the AC IN and the

wall outlet.

To wall outlet ←

CAUTION:

Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if the

AC power supply is disconnected during normal projector operation.

Be careful to handle the projector.

2. Projecting an Image (Basic Operation)

❸ Turning on the Projector

1. Remove the lens cap.

Press and hold the two dent part on the lens cap and pull

it toward you.

2. Press the

(POWER) button on the projector cabinet

or the POWER ON button on the remote control.

The POWER indicator will blink and the projector will

become ready to use.

TIP:

• When the message “Projector is locked! Enter your password.”

is displayed, it means that the [SECURITY] feature is turned on.

(→ page 31)

Standby

Blinking

Power On

After you turn on your projector, ensure that the computer

or video source is turned on.

Steady red light

Blinking blue

light

Steady blue

light

NOTE: When no input signal is present, the no-signal guidance is

displayed (factory menu setting).

(→ page 108)

2. Projecting an Image (Basic Operation)

Note on Startup screen (Menu Language Select screen)

When you ﬁrst turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one

of the 30 menu languages.

To select a menu language, follow these steps:

1. Use the ▲, ▼, ◀ or ▶ button to select one of the 30

languages from the menu.

2. Press the ENTER button to execute the selection.

After this has been done, you can proceed to the menu

operation.

If you want, you can select the menu language later.

(→ [LANGUAGE] on page 55 and 69)

NOTE:

• If the projector is shut off by DIRECT POWER OFF (pulling out the power cord) during projection, wait for 1 second at least for

reconnect the power cord for turning on the projector.

Failing to do so could result in no power to the projector. (There will be no stand-by LED)

Should this happen, unplug the power cord and plug it in again. Turn on the main power.

• If one of the following things happens, the projector will not turn on.

- If the internal temperature of the projector is too high, the projector detects abnormal high temperature. In this condition the

projector will not turn on to protect the internal system. If this happens, wait for the projector’s internal components to cool

down.

- When the lamp reaches its end of usable life, the projector will not turn on. If this happens, replace the lamp.

- If the STATUS indicator lights orange with the power button pressed, it means that the [CONTROL PANEL LOCK] is turned on.

Cancel the lock by turning it off. (→ page 71)

- If the lamp fails to light, and if the STATUS indicator ﬂashes on and off in a cycle of six times, wait a full minute and then turn

on the power.

• While the POWER indicator is blinking blue in short cycles, the power cannot be turned off by using the power button.

• Immediately after turning on the projector, screen ﬂicker may occur. This is normal. Wait 3 to 5 minutes until the lamp lighting is

stabilized.

• When the projector is turned on, it may take some time before the lamp light becomes bright.

• If you turn on the projector immediately after the lamp is turned off or when the lamp temperature is high, the fans run without

displaying an image for some time and then the projector will display the image.

2. Projecting an Image (Basic Operation)

❹ Selecting a Source

Selecting the computer or video source

NOTE: Turn on the computer or video source equipment connected to the projector.

Detecting the Signal Automatically

Press the SOURCE button once. The projector will search for the avail-

able input source and display it. The input source will change as follows:

HDMI1 → HDMI2 → COMPUTER → VIDEO → USB-A → LAN → USB-B

•

With the SOURCE screen displayed, you can press the SOURCE

button a few times to select the input source.

TIP: If no input signal is present, the input will be skipped.

Using the Remote Control

Press any one of the COMPUTER 1, HDMI1, HDMI2, VIDEO, USB-A,

USB-B, or LAN buttons.

Selecting Default Source

You can so that it will be displayed each time the projector is turned on.

1. Press the MENU button.

The menu will be displayed.

2. Press the ▶ button twice to select [SETUP] and the ▼ button or

the ENTER button to select [GENERAL].

3. Press the

▶

button four times to select [OPTIONS(2)].

4. Press the ▼ button ﬁve times to select [DEFAULT SOURCE SELECT]

and press the ENTER button.

The [DEFAULT SOURCE SELECT] screen will be displayed.

(→ page 77)

5. Select a source as the default source, and press the ENTER button.

6. Press the EXIT button a few times to close the menu.

7. Restart the projector.

The source you selected in step 5 will be projected.

TIP:

• When the projector is in Standby mode, applying a computer signal from a

computer connected to the COMPUTER IN input will power on the projector

and simultaneously project the computer’s image.

([AUTO POWER ON] → page 76)

• On Windows 7, a combination of the Windows and P keys allows you to set up

external display easily and quickly.

2. Projecting an Image (Basic Operation)

❺ Adjusting the Picture Size and Position

Use the adjustable tilt foot, the zoom function or the focus ring to adjust the picture size and position.

In this chapter drawings and cables are omitted for clarity.

Adjusting the throw angle (the height of an image)

Adjusting the left and right tilt of an image

[Tilt foot] (→ page 16)

[Rear foot] (→ page 16)

Finely adjusting the size of an image

Adjusting the focus

[Zoom lever] (→ page 17)

[Focus ring] (→ page 17)

Adjusting the keystone correction [KEYSTONE]* (→ page 18)

Automatic Keystone Correction function is turned on at the time of shipment.

To perform keystone correction manually, see “6. Correcting Keystone Distortion Manually” on page 18.

2. Projecting an Image (Basic Operation)

Adjust the Tilt Foot

1. Lift the front edge of the projector.

CAUTION:

Do not try to touch the exhaust vent during Tilt Foot adjustment as it can

become heated while the projector is turned on and after it is turned off.

2. Push up and hold the Adjustable Tilt Foot Lever on the front of

the projector to extend the adjustable tilt foot.

3. Lower the front of the projector to the desired height.

Adjustable Tilt

Foot Lever

Adjustable Tilt Foot

4. Release the Adjustable Tilt Foot Lever to lock the Adjustable tilt

foot.

The tilt foot can be extended up to 1.6 inch/40 mm.

There is approximately 10 degrees (up) of adjustment for the front of

the projector.

Rotate the rear foot to the desired height in order to square the image

on the projection surface.

CAUTION:

• Do not use the tilt-foot for purposes other than originally intended.

Misuses such as using the tilt foot to carry or hang (from the wall or

ceiling) the projector can cause damage to the projector.

Adjusting the left and right tilt of an image [Rear foot]

• Rotate the rear foot.

The rear foot can be extended up to 0.5 inch/12 mm. Rotating the

rear foot allows the projector to be placed horizontally.

NOTE:

• Do not extend the rear foot beyond its height limit (0.5 inch/12 mm). Doing so

may cause the rear foot to come out of the projector.

Rear foot

Down

2. Projecting an Image (Basic Operation)

Zoom

Use the ZOOM lever to adjust the image size on the screen.

Zoom Lever

Focus

Use the FOCUS ring to obtain the best focus.

Focus Ring

2. Projecting an Image (Basic Operation)

❻ Correcting Keystone Distortion [KEYSTONE]

When the projector is not exactly perpendicular to the screen, keystone distortion occurs. For correcting this distor-

tion, you can use the “Keystone” function, a digital technology that can adjust for keystone-type distortion, resulting

in a crisp, square image.

The function of Automatic Keystone Correction is ON as the default factory setting.

The following procedure explains how to use the [KEYSTONE] screen from the menu to correct trapezoidal distortions

when the projector is placed diagonally to the screen.

• Before performing KEYSTONE correction

The KEYSTONE correction has four features, KEYSTONE HORIZONTAL, KEYSTONE VERTICAL, PINCUSH-

ION LEFT/RIGHT, PINCUSHION TOP/BOTTOM, and CORNERSTONE. If the value of either CONERSTONE or

PINCUSHION has corrected, KEYSTONE HORIZONTAL and KEYSTONE VERTICAL are disabled. In this case,

RESET the corrected values and restart to correct distortion.

1. Press the ▼ button on the projector cabinet.

The Keystone screen will be displayed on the screen.

• Press the KEYSTONE button when using the remote control.

• See page for PINCUSHION.

• See page for CORNERSTONE.

• See page for RESET.

Projected area

2. Press the ▼ button to select [VERTICAL] and then use the ◀ or ▶

Screen frame

so that the left and right sides of the projected image are parallel.

Adjust the vertical keystone distortion.

3. Align the left (or right) side of the screen with the left (or right)

side of the projected image.

• Use the shorter side of the projected image as the base.

• In the right example, use the left side as the base.

Align left side

2. Projecting an Image (Basic Operation)

4. Press the ▲ button to select [HORIZONTAL] and then use the ◀

or ▶ so that the top and bottom sides of the projected image are

parallel.

• Adjust the horizontal keystone distortion.

5. Repeat steps 2 and 4 to correct keystone distortion.

6. After completing Keystone correction, press the EXIT button.

The Keystone screen will disappear.

• To perform Keystone correction again, press the ▼ button to display

the Keystone screen and repeat above steps 1 to 6.

To return the keystone adjustments to default:

1. Press the ▼ button to select [RESET] and press the ENTER button.

2. Press the ◀ or ▶ button to select [YES] and press the ENTER button.

The adjustments will be reset.

All the adjustments for all the ﬁve items will be reset at the same time.

• The KEYSTONE feature can cause an image to be slightly blurred because the correction is made electroni-

cally.

2. Projecting an Image (Basic Operation)

❼ Optimizing Computer Signal Automatically

Adjusting the Image Using Auto Adjust

Optimizing a computer image automatically. (COMPUTER)

Press the AUTO ADJ. button to optimize a computer image automatically.

This adjustment may be necessary when you connect your computer

for the ﬁrst time.

[Poor picture]

[Adjusted picture]

NOTE:

Some signals may take time to display or may not be displayed correctly.

• If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and [PHASE]

manually. (→ page 62, 63)

❽ Turning Up or Down Volume

Sound level from the speaker or audio output can be adjusted.

Increase volume

Decrease volume

TIP: When no menus appear, the ◀ and ▶ buttons on the projector

cabinet work as a volume control.

NOTE:

• Volume control is not available with the ◀ or ▶ button when an

image is magniﬁed by using the D-ZOOM (+) button or when the

menu is displayed.

• Volume control is not available with the ◀ or ▶ button when

VIEWER is used.

TIP: The [BEEP] sound volume cannot be adjusted. To turn off the

[BEEP] sound, from the menu, select [SETUP] → [OPTIONS (1)] →

[BEEP] → [OFF].

2. Projecting an Image (Basic Operation)

❾ Turning off the Projector

To turn off the projector:

1. First, press the

(POWER) button on the projector

cabinet or the STANDBY button on the remote control.

The conﬁrmation message will be displayed.

Power On

Standby

2. Secondly, press the ENTER button or press the

(POWER) or the STANDBY button again.

The lamp will turn off and the projector will go into standby

mode. When in standby mode, the POWER indicator will

light red and the STATUS indicator will turn off when

[NORMAL] is selected for [STANDBY MODE].

Steady blue light

Steady red light

CAUTION:

Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if the

AC power supply is disconnected during normal projector operation.

Use caution when picking up the projector.

NOTE:

• While the power indicator is blinking blue in short cycles, the power cannot be turned off.

• You cannot turn off the power for 60 seconds immediately after turning it on and displaying an image.

• Do not disconnect the AC power supply to the projector within 10 seconds after making adjustment or setting changes and closing

the menu. Doing so can cause loss of adjustments and settings.

2. Projecting an Image (Basic Operation)

❿ When Moving the Projector

Preparation: Make sure that the projector is turned off.

1. Put on the lens cap.

2. Unplug the power cord.

3. Disconnect any other cables.

• Remove the USB memory or the wireless LAN Unit if it is inserted into the projector.

(→ page 49, 98)

3. Convenient Features

❶ Turning off the Image and Sound

Press the AV-MUTE button to turn off the image and sound for a short period of

time. Press again to restore the image and sound.

The projector’s power-saving function will work 10 seconds after the image is turned

off.

As a result, the lamp power will be reduced.

NOTE:

• Even though the image is turned off, the menu still remains on the screen.

• Sound from the AUDIO OUT jack (Stereo mini) can be turned off.

• Even when the power-saving function works, the lamp power may be restored to its original

level temporarily.

• To restore the image, even if you press the AV-MUTE button immediately after the start of

the power-saving function, the lamp brightness may not be restored to its original level.

❷ Freezing a Picture

Press the FREEZE button to freeze a picture. Press again to resume motion.

NOTE: The image is frozen but the original video is still playing back.

• This feature can not be used when USB-A is selected as the input terminal.

❸ Magnifying a Picture

You can enlarge the picture up to four times.

NOTE:

• The maximum magniﬁcation may be less than four times depending on the signal.

• This feature can not be used when LAN, and USB-B is selected as the input terminal.

To do so:

1. Press the D-ZOOM (+) button to magnify the picture.

To move the magniﬁed image, use the ▲,▼,◀ or ▶ button.

3. Convenient Features

2. Press the ▲▼◀▶ button.

The area of the magniﬁed image will be moved

3. Press the D-ZOOM (−) button.

Each time the D-ZOOM (−) button is pressed, the image is reduced.

NOTE:

• The image will be magniﬁed or demagniﬁed at the center of the screen.

• Displaying the menu will cancel the current magniﬁcation.

❹ Changing Eco Mode/Checking Energy-Saving Effect

Using Eco Mode [ECO MODE]

The ECO MODE (NORMAL and ECO) increases lamp life, while lowering power consumption and cutting down on

CO₂emissions.

Four brightness modes of the lamp can be selected: [OFF], [AUTO ECO], [NORMAL] and [ECO] modes.

[ECO MODE]

[OFF]

Description

Status of LAMP indicator

Off

The lamp brightness is 100%.

[AUTO ECO]

Lamp power consumption will be changed between

[OFF] and [NORMAL] automatically according to

picture level

NOTE: A bright gradation may be less visible depending

on the image.

[NORMAL]

[ECO]

Lamp power consumption: approx.80% brightness.

The lamp life will extend by lowering the lamp power.

Steady Green

light

Lamp power consumption (approx. 60% brightness).

The lamp life will extend longer than the one on

NORMAL mode by controlling power appropriate for

the lamp. The maximum power becomes equivalent

to the power in NORMAL.

To turn on the [ECO MODE], do the following:

1. Press the ECO Button on the remote control to display [ECO MODE] screen.

2. Press the ECO button again to select a mode you wish.

• Each time the ECO button is pressed, the choices will be changed:

OFF → AUTO ECO → NORMAL → ECO → OFF

TIP:

• The leaf symbol at the bottom of the menu shows the current selection of ECO mode.

3. Convenient Features

NOTE:

• The [ECO MODE] can be changed by using the menu.

Select [SETUP] → [GENERAL] → [ECO MODE].

• The lamp life remaining and lamp hours used can be checked in [USAGE TIME]. Select [INFO.] →[USAGE TIME].

• The projector is always in [NORMAL] for 90 seconds after the lamp is turned on and while the POWER indicator is blinking green.

The lamp condition will not be affected even when [ECO MODE] is changed.

• After a lapse of 1 minute from when the projector displays no-signal guidance, a blue, black or logo screen, [ECO MODE] will

automatically switch to [ECO]. The projector will return to its original setting once a signal is accepted.

• If the projector is overheated in [OFF] mode, there may be a case where the [ECO MODE] automatically changes to [NORMAL]

mode to protect the projector. When the projector is in [NORMAL] mode, the picture brightness decreases. When the projector

comes back to normal temperature, the [ECO MODE] returns to its original setting.

Thermometer symbol [ ] indicates the [ECO MODE] is automatically set to [NORMAL] mode because the internal temperature

is too high.

• Immediately after [ECO MODE] is changed from [ECO] to one of [OFF], [AUTO ECO], or [NORMAL], the lamp brightness may

decrease temporarily. This is not a malfunction.

Checking Energy-Saving Effect [CARBON METER]

This feature will show energy-saving effect in terms of CO₂emission reduction (kg) when the projector’s [ECO MODE]

is set to [AUTO ECO], [NORMAL], or [ECO]. This feature is called as [CARBON METER].

There are two messages: [TOTAL CARBON SAVINGS] and [CARBON SAVINGS-SESSION]. The [TOTAL CARBON

SAVINGS] message shows the total amount of CO₂emission reduction from the time of shipment up to now. You can

check the information on [USAGE TIME] from [INFO.] of the menu. (→ page 81)

The [CARBON SAVINGS-SESSION] message shows the amount of CO₂emission reduction between the time of

changing to ECO MODE immediately after the time of power-on and the time of power-off. The [CARBON SAVINGS-

SESSION] message will be displayed in the [POWER OFF/ ARE YOU SURE?] message at the time of power-off.

TIP:

• The formula as shown below is used to calculate the amount of CO₂emission reduction.

Amount of CO₂emission reduction = (Power consumption in OFF for ECO MODE − Power consumption in AUTO ECO/NORMAL/

ECO for ECO MODE) × CO₂conversion factor.* When the image is turned off with the AV-MUTE button, the amount of CO₂em-

mission reduction will also increase.

* Calculation for amount of CO₂emission reduction is based on an OECD publication “CO₂Emissions from Fuel Combustion, 2008

Edition”.

• The [TOTAL CARBON SAVINGS] is calculated based on savings recorded in 15 minutes intervals.

• This formula will not apply to the power consumption which is not affected by whether [ECO MODE] is turned on or off.

3. Convenient Features

❺ Using 4-Point Corner to Correct Keystone Distortion

[CORNERSTONE]

Use the [CORNERSTONE] and [PINCUSHION] features to correct keystone (trapezoidal) distortion to make the top

or bottom and the left or right side of the screen longer or shorter so that the projected image is rectangular.

Before performing correction

The KEYSTONE correction has features, KEYSTONE (HORIZONTAL/VERTICAL), PINCUSHION (LEFT/RIGHT, TOP/

BOTTOM), and CORNERSTONE. If the value of either CONERSTONE or PINCUSHION has corrected, KEYSTONE

HORIZONTAL and KEYSTONE VERTICAL are disabled. In this case, RESET the corrected values and restart to

correct distortion

Cornerstone

1. Press the KEYSTONE button with no menu displayed.

The KEYSTONE screen will be displayed.

• Press the KEYSTONE button when using the remote control.

• See page for PINCUSHION.

2. Press the ▼ button to select [CORNERSTONE] and press the ENTER button.

The drawing shows the upper left icon ( ) is selected.

The CORNERSTONE screen will be displayed.

3. Project an image so that the screen is smaller than the area of the raster.

4. Pick up any one of the corners and align the corner of the image with a corner of the screen.

Projected image

The drawing shows the upper right corner.

TIP: If either CORNERSTONE or PINCUSION is adjusted, the options KEYSTONE VERTICAL and KEYSTONE HORIZONTAL become

unavailable. In this case, RESET the corrected values and restart to correct distortion.

3. Convenient Features

5. Use the ▲▼◀▶ button to select one icon (▲) which points in the direction you wish to move the projected

image frame.

6. Press the ENTER button.

7. Use the ▲▼◀▶ button to move the projected image frame as shown on the example.

8. Press the ENTER button.

9. Use the ▲▼◀▶ button to select another icon which points in the direction.

On the Cornerstone adjustment screen, select [EXIT] or press the EXIT button on the remote control.

The conﬁrmation screen is displayed.

10.Press the ◀ or ▶ button to highlight the [OK] and press the ENTER button.

This completes the Cornerstone correction.

Selecting [CANCEL] will return to the adjustment screen without saving changes (Step 3).

Selecting [RESET] will return to the factory default.

Selecting [UNDO] will exit without saving changes.

3. Convenient Features

Pincushion

By this feature, it enables to adjust left and right side or top and bottom side independently for reforming pincushion

distortion.

1. Press the KEYSTONE button with no menu displayed.

The KEYSTONE screen will be displayed.

• Press the KEYSTONE button when using the remote control.

2. Press the ▼ or ▲ button to select [PINCUSHION LEFT/RIGHT]

or [PINCUSHION TOP/BOTTOM].

3. Press the ◀ or ▶ button to correct distortion.

NOTE:

• The [PINCUSHION LEFT/RIGHT] or [PINCUSHION TOP/BOTTOM] item is

not available when [KEYSTONE HORIZONTAL], [KEYSTONE VERTICAL]

or [CORNERSTONE] is activated.

• Before performing correction, set the lens shift to the center position.

4. Press the EXIT when PINCUSHION adjustment is completed.

NOTE:

• Even when the projector is turned on, the last used correction values are applied.

• [PINCUSHION] and [CORNERSTONE] corrections can cause the image to be slightly blurred because the correction is made

electronically.

3. Convenient Features

Reset the keystone and pincushion adjustment to the default value

1. Press the KEYSTONE button with no menu displayed.

ON the displayed KEYSTONE menu, set the cursor at RESET using the ▼ button and press ENTER button.

• Conﬁrmation message is displayed on.

2. Move the cursor onto YES using either ◀ or ▶ button and then press the ENTER.

NOTE:

• All adjusted values set in the KEYSTONE adjustment are reset to initial values

TIP:

Adjustable range of the KEYSTONE and the CORNERSTONE:

Horizontal Direction

Vertical Direction

CORNERSTONE

KEYSTONE

Approx. ±30° (Max)

Adjustable range may be narrower depending on input signal.

3. Convenient Features

❻

Preventing the Unauthorized Use of the Projector [SECURITY]

A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user. When a keyword

is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is entered, the pro-

jector cannot project an image.

•

The [SECURITY] setting cannot be cancelled by using the [RESET] of the menu.

To enable the Security function:

1. Press the MENU button.

The menu will be displayed.

2. Press the ▶ button twice to select [SETUP] and press the ▼ button or the ENTER button to select [GENERAL].

3. Press the ▶ button to select [INSTALLATION].

4. Press the ▼ button three times to select [SECURITY] and press the ENTER button.

The OFF/ON menu will be displayed.

5. Press the ▼ button to select [ON] and press the ENTER button.

The [SECURITY KEYWORD] screen will be displayed.

6. Type in a combination of the four ▲▼◀▶ buttons and press the ENTER button.

NOTE: A keyword must be 4 to 10 digits in length.

The [CONFIRM KEYWORD] screen will be displayed.

3. Convenient Features

7. Type in the same combination of ▲▼◀▶ buttons and press the ENTER button.

The conﬁrmation screen will be displayed.

8. Select [YES] and press the ENTER button.

The SECURITY function has been enabled.

To turn on the projector when [SECURITY] is enabled:

1. Press the POWER button.

The projector will be turned on and display a message to the effect that the projector is locked.

2. Press the MENU button.

3. Type in the correct keyword and press the ENTER button. The projector will display an image.

NOTE: The security disable mode is maintained until the main power is turned off or unplugging the power cord.

3. Convenient Features

To disable the SECURITY function:

1. Press the MENU button.

The menu will be displayed.

2. Select [SETUP] → [INSTALLATION] → [SECURITY] and press the ENTER button.

The OFF/ON menu will be displayed.

3. Select [OFF] and press the ENTER button.

The SECURITY KEYWORD screen will be displayed.

4. Type in your keyword and press the ENTER button.

When the correct keyword is entered, the SECURITY function will be disabled.

NOTE: If you forget your keyword, contact your dealer. Your dealer will provide you with your keyword in exchange for your request

code. Your request code is displayed in the Keyword Conﬁrmation screen. In this example [NB52-YGK8-2VD6-K585-JNE6-EYA8]

is a request code.

3. Convenient Features

❼

Operating Your Computer’s Mouse Functions from the

Projector’s Remote Control via the USB Cable (Remote Mouse

Function)

The built-in remote mouse function enables you to operate your computer’s mouse functions from the supplied remote

control when the projector is connected to a computer via a commercially available USB cable (compatible with USB

2.0 speciﬁcations).

Press the USB-B button on the remote control, or select [USB-B] for the source on the On-screen menu.

•

Using the USB cable to connect the projector and the computer will also start USB Display function.

•

When you connect your computer and the projector by a USB cable for the ﬁrst time, your computer will read in

the software. It will take few minutes for starting up the USB display.

USB cable (not supplied)

NOTE:

• A USB cable must support the USB 2.0 Speciﬁcations.

• The mouse function can be used with the following operating systems:

Windows 7, Windows XP, Windows Vista

• Wait at least 5 seconds after disconnecting the USB cable before reconnecting it and vice versa. The computer may not identify

the USB cable if it is repeatedly connected and disconnected in rapid intervals.

• Connect the projector to the computer with a USB cable after starting the computer. Failure to do so may fail to start the computer.

Operating your computer’s mouse from the remote control

You can operate your computer’s mouse from the remote control.

PAGE ▽/△ Button ��scrolls the viewing area of the window or to move to the previous or next slide in PowerPoint

on your computer�

▲▼◀▶ Buttons��moves the mouse cursor on your computer�

MOUSE L-CLICK/ENTER Button ��works as the mouse left button�

MOUSE R-CLICK Button��works as the mouse right button�

NOTE:

• When you operate the computer using the ▲▼◀ or ▶ button with the menu displayed, both the menu and the mouse pointer

will be affected. Close the menu and perform the mouse operation.

TIP: You can change the Pointer speed on the Mouse Properties dialog box on the Windows. For more information, see the user

documentation or online help supplied with your computer.

3. Convenient Features

❽ Projecting Your Computer’s Screen Image from the

Projector via the USB Cable (USB Display)

Using a commercially available USB cable (compatible with USB 2.0 speciﬁcations) to connect the computer with the

projector allows you to send your computer screen image to the projector for displaying. Power On/Off and source

selection of the projector can be done from your computer without connecting a computer cable (VGA).

The USB Display utilizes the function of Image Express Utility Lite which is pre-installed software on the projector.

NOTE:

• To make the USB-Display available on Windows XP, the Windows user account must have “Administrator” privilege.

• USB Display will not work in [NORMAL] of [STANDBY MODE]. (→ page 75)

1. Start the computer.

2. Connect the projector’s power cord to the wall outlet and put the projector into standby condition.

3. Use the USB cable to connect the computer with the projector.

USB cable (not supplied)

→ To wall outlet

Power cord (supplied)

The message “The projector is in standby mode. Connect it?” will be displayed on the computer screen.

• The control window of Image Express Utility Lite will be displayed on the top of the screen.

NOTE: Depending on the computer setting, the “AutoPlay” window may be displayed when the com-

puter detects the connection to the projector. If this happens, click the “Start USB Display” window.

4. Click “Yes”.

The projector will turn on and the message “The projector is getting ready. Please wait.” will be displayed on the

computer screen. This message will disappear in a few seconds.

3. Convenient Features

5. Operate the control window.

(6)

(1)

(2)

(3)

(4)

(5)

(1)

(2)

(3)

(4)

(Source)�� Selects an input source of the projector�

(Picture) �� Turns on or off AV-MUTE (Picture mute), and turns on or off FREEZE (Freeze a picture)�

(Sound) �� Turns on or off AV-MUTE (Sound mute), play the sound and turns up or down the volume�

(Others)�� Uses “Update”, “HTTP Server”*, “Settings” and “Information”�

* The HTTP Server cannot be selected when a USB cable is connected�

(5)

(Projection) Enables to change screen size for presentation, menu indication (hide/indicate), interruption prohibition/

accept interruption�

(6) (Help)�� Displays the help of Image Express Utility Lite�

3. Convenient Features

❾ Controlling the Projector by Using an HTTP Browser

Overview

The HTTP Server function provides settings and operations for:

1. Setting for wired/wireless network (NETWORK SETTINGS)

To use wireless LAN connection, the optional USB Wireless LAN Unit is required. (→ page 97)

To use wired/wireless LAN connection, connect the projector to the computer with a commercially available LAN

cable. (→ page 96)

2. Setting Alert Mail (ALERT MAIL)

When the projector is connected to a wired/wireless network, lamp replace time or error messages will be sent

via e-mail.

3. Operating the projector

Power on/off, selecting input, volume control and picture adjustments are possible.

4. Setting PJLink PASSWORD, AMX BEACON, and CRESTRON

How to access to the HTTP server:

• Start the Web browser on the computer via the network connected to the projector and enter the following

URL :

http://<the projector’s IP address> /index.html

TIP: The factory setting IP address is [DHCP ON].

NOTE:

• To use the projector in a network, consult with your network administrator about network settings.

• The display’s or button’s response can be slowed down or operation may not be accepted depending the settings of your network.

Should this happen, consult your network administrator. The projector may not respond if its buttons are repeatedly pressed in

rapid intervals. Should this happen, wait a moment and repeat. If you still can’t get any response, turn off and back on the projec-

tor.

• If the PROJECTOR NETWORK SETTINGS screen does not appear in the web browser, press the Ctrl+F5 keys to refresh your web

browser (or clear the cache).

• This device uses “JavaScript” and “Cookies” and the browser should be set to accept these functions. The setting method will

vary depending on the version of browser. Please refer to the help ﬁles and the other information provided in your software.

Preparation before Use

Connect the projector to a commercially available LAN cable before engaging in browser operations. (→ page 96)

Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the

setting method. Although the type of proxy server will be a factor, it is possible that items that have actually been set

will not be displayed depending on the effectiveness of the cache, and the contents set from the browser may not be

reﬂected in operation. It is recommended that a proxy server not be used unless it is unavoidable.

3. Convenient Features

Handling of the Address for Operation via a Browser

Regarding the actual address that is entered for the address or entered to the URL column when operation of the

projector is via a browser, the host name can be used as it is when the host name corresponding to the IP address

of the projector has been registered to the domain name server by a network administrator, or the host name cor-

responding to the IP address of the projector has been set in the “HOSTS” ﬁle of the computer being used.

Example 1: When the host name of the projector has been set to “pj.nec.co.jp”, access is gained to the network

setting by specifying

http://pj.nec.co.jp/index.html

for the address or the entry column of the URL.

Example 2: When the IP address of the projector is “192.168.73.1”, access is gained to the network setting by

specifying

http://192.168.73.1/index.html

for the address or the entry column of the URL.

PROJECTOR ADJUSTMENT

POWER: This controls the power of the projector.

ON �� Power is switched on�

OFF �� Power is switched off�

VOLUME: This controls the volume of the projector.

▲�� Increases the volume adjustment value�

▼�� Decreases the volume adjustment value�

AV-MUTE: This controls the mute function of the projector.

PICTURE ON�� Mutes the video�

PICTURE OFF�� Cancels the video muting�

SOUND ON �� Mutes the audio�

SOUND OFF �� Cancels the audio muting�

ALL ON�� Mutes each of the video, and audio functions�

ALL OFF�� Cancels the muting of each of the video, and audio functions�

3. Convenient Features

PICTURE: Controls the video adjustment of the projector.

CONTRAST ▲�� Increases the contrast adjustment value�

CONTRAST ▼�� Decreases the contrast adjustment value�

BRIGHTNESS ▲ �� Increases the brightness adjustment value�

BRIGHTNESS ▼ �� Decreases the brightness adjustment value�

SHARPNESS ▲ �� Increases the sharpness adjustment value�

SHARPNESS ▼ �� Decreases the sharpness adjustment value�

COLOR ▲ �� Increases the color adjustment value�

COLOR ▼ �� Decreases the color adjustment value�

HUE ▲�� Increases the hue adjustment value�

HUE ▼�� Decreases the hue adjustment value�

•

The functions that can be controlled will vary depending on the signal being input to the projector. (→ page 61)

SOURCE SELECT: This switches the input terminal of the projector.

HDMI1�� Switches to the HDMI 1 IN terminal

HDMI2�� Switches to the HDMI 2 IN terminal�

COMPUTER �� Switches to the COMPUTER IN terminal�

VIDEO�� Switches to the VIDEO IN terminal�

USB-A�� Switches to the data on the USB memory device�

LAN�� Switches to a LAN signal�

USB-B�� Switches to the USB Port (PC)�

PROJECTOR STATUS: This displays the condition of the projector.

LAMP LIFE REMAINING ��Displays the remaining life of the lamp as a percentage�

LAMP HOURS USED��Displays how many hours the lamp has been used�

FILTER HOURS USED��Displays how many hours the ﬁlter has been used�

ERROR STATUS��Displays the status of errors occurring within the projector�

LOG OFF: Logging off your projector and returning to the authentication screen (LOGON screen).

3. Convenient Features

NETWORK SETTINGS

• SETTINGS

PIN TYPE

Select type of PIN code.

ONE-TIME

The PIN CODE is automatically created every time powering

ON the projector. Created PIN CODE is kept unchanged until

the projector is powered OFF.

STATIC

Enables to set up random number for the PIN CODE.

PIN CODE

For the case ONE-TIME is selected as PIN TYPE, automatically created PIN CODE

is displayed on (disabled to input).

For the case STATIC is selected as PIN TYPE, input random 4 digits number as PIN

CODE.

USE PIN CODE AS PASS- Select if you use the PIN CODE as a security password for connecting to the Multi-

WORD FOR MultiPres- Presenter application. For using the PIN code as a security password, add a check

enter CONNECTIONG

mark into the square.

□ �� USE PIN CODE AS PASSWORD FOR CONNECTING TO MultiPresenter�

APPLY

Make the settings for PIN effective.

WIRED LAN

ENABLE

Turn on wired LAN connection

Turn off wired LAN connection

Set for wired LAN.

DISABLE

SETTING

DHCP ON

Automatically IP ADDRESS, SUBNET MASK, and GATEWAY are assigned to the

projector by your DHCP server.

DHCP OFF

Set IP ADDRESS, SUBNET MASK, and GATEWAY to the projector assigned by your

network administrator.

IP ADDRESS

SUBNET MASK

GATEWAY

Set your IP ADDRESS of the network connected to the projector.

Set your SUBNET MASK number of the network connected to the projector.

Set the default GATEWAY of the network connected to the projector.

3. Convenient Features

AUTO DNS ON

AUTO DNS OFF

DHCP server will automatically assign IP ADDRESS of DNS server connected to the

projector.

Set your IP ADDRESS of DNS server connected to the projector.

Make the settings for wired LAN effective.

APPLY

WIRELESS LAN

SMART CONNECTION

Easily connect to a computer or a smart phone utilizing the application software, Mul-

tiPresenter, installed on them.

SIMPLE ACCESS POINT Set the projector as a simple access point for connecting to a computer or a smart phone.

INFRASTRUCTURE

DISABLE

Connect this device to an access point.

Turn off wireless LAN connection

Set for wireless LAN.

SETTING

APPLY

Connect to the network wirelessly by the selected option among SMART CONNEC-

TION, SIMPLE ACCESS POINT, and INFRASTRUCTURE.

WIRELESS LAN (SMART CONNECTION)

CONNEC-

TION

MODE

Select wireless frequency band.

Select wireless channel.

CHANNEL

SECURITY SECURITY Select if you use the PIN CODE as a security password when STATIC is selected for

TYPE PIN TYPE.

SECURITY When SECURITY is enabled, set a SECURITY KEY. SECURITY KEY must be 8 to

KEY 63 alphanumeric characters (including a space).

WIRELESS LAN (SIMPLE ACCESS POINT)

CONNEC-

SSID

Set SSID as an access point. SSID must be 1 to 32 alphanumeric characters (includ-

TION

ing a space).

MODE

Select wireless frequency band.

Select wireless channel.

CHANNEL

SECURITY SECURITY Select security type.

TYPE

SECURITY Set a SECURITY KEY. SECURITY KEY must be 8 to 63 alphanumeric characters

KEY (including a space).

WIRELESS LAN (INFRASTRUCTURE)

IP AD-

DRESS

DHCP ON

Automatically IP ADDRESS, SUBNET MASK, and GATEWAY are assigned to the

projector by your DHCP server.

DHCP OFF Set IP ADDRESS, SUBNET MASK, and GATEWAY to the projector assigned by your

network administrator.

IP AD-

Set your IP ADDRESS of the network connected to the projector.

DRESS

SUBNET

MASK

Set your SUBNET MASK number of the network connected to the projector.

GATEWAY Set the default GATEWAY of the network connected to the projector.

AUTO DNS DHCP server will automatically assign IP ADDRESS of DNS server connected to the

projector.

AUTO DNS Set your IP ADDRESS of DNS server connected to the projector.

OFF

3. Convenient Features

CONNEC-

TION

SSID

Enter an identiﬁer (SSID) as an access point. SSID must be 1 to 32 alphanumeric

characters (including a space).

SECURITY SECURITY Select security type.

INDEX When WEP 64bit or WEP 128bit is selected for SECURITY, activate the INDEX. The

value for this is ﬁxed at “1”.

SECURITY Set a SECURITY KEY. SECURITY KEY must be 8 to 63 alphanumeric characters

KEY

(including a space).

• NAME

PROJECTOR NAME

HOST NAME

Enter a name for your projector so that your computer can identify the projector. A

projector name must be 16 characters or less.

TIP: Projector name will not be affected even when [RESET] is done from the menu.

Enter the hostname of the network connected to the projector. A host name must be

16 or less.

• ALERT MAIL

ALERT MAIL (English

only)

This option will notify your computer of lamp replace time or error messages via e-mail

when using wireless or wired LAN.

Placing a checkmark will turn on the Alert Mail feature.

Clearing a checkmark will turn off the Alert Mail feature.

Sample of a message to be sent from the projector:

The lamp and ﬁlters are at the end of its usable life. Please replace the lamp and

ﬁlters.

Projector Name: NEC Projector

Lamp Hours Used: 100 [H]

SENDER’S ADDRESS

SMTP SERVER NAME

Enter sender’s address.

Enter the SMTP server name to be connected to the projector.

RECIPIENT’S ADDRESS Enter your recipient’s address. Up to three addresses can be entered.

1,2,3

TEST MAIL

Send a test mail to check whether your settings are correct or not

NOTE:

• If you execute a test, you may not receive an Alert mail. Should this happen, check if network

settings are correct.

• If you entered an incorrect address in a test, you may not receive an Alert mail. Should this

happen, check if the Recipient’s Address is correct.

SAVE

Click this button to save the above settings on the projector.

3. Convenient Features

• NETWORK SERVICE

PJLink PASSWORD

Set a password for PJLink*. A password must be 32 characters or less. Do not forget

your password. However, if you forget your password, consult with your dealer.

HTTP PASSWORD

AMX BEACON

Set a password for HTTP server. A password must be 10 characters or less.

Turn on or off for detection from AMX Device Discovery when connecting to the network

supported by AMX’s NetLinx control system.

TIP:

When using a device that supports AMX Device Discovery, all AMX NetLinx control system will

recognize the device and download the appropriate Device Discovery Module from an AMX server.

Placing a checkmark will enable detecting the projector from AMX Device Discovery.

Clearing a checkmark will disable detecting the projector from AMX Device Discovery.

*What is PJLink?

PJLink is a standardization of protocol used for controlling projectors of different manufacturers. This standard

protocol is established by Japan Business Machine and Information System Industries Association (JBMIA) in 2005.

The projector supports all the commands of PJLink Class 1.

Setting of PJLink will not be affected even when [RESET] is done from the menu.

CRESTRON ROOMVIEW compatibility

The projector supports CRESTRON ROOMVIEW, allowing multiple devices connected in the network to be managed

and controlled from a computer or a controller.

For more information, visit http://www.crestron.com

Access to the HTTP server, and make necessary settings for [CRESTRON] in [NETWORK SETTINGS].

• ROOMVIEW for managing from the computer.

DISABLE

ENABLE

Disables ROOMVIEW.

Enables ROOMVIEW.

• CRESTRON CONTROL for managing from the controller.

DISABLE

ENABLE

IP ADDRESS

IP ID

Disables CRESTRON CONTROL.

Enables CRESTRON CONTROL.

Set your IP address of CRESTRON SERVER.

Set your IP ID of CRESTRON SERVER.

TIP: The CRESTRON settings are required only for use with CRESTRON ROOMVIEW.

For more information, visit http://www.crestron.com

• INFORMATION

WIRED LAN

WIRELESS LAN

UPDATE

Display a list of settings of wired LAN connection.

Display a list of settings of wireless LAN connection.

Reﬂect settings when they are changed.

3. Convenient Features

❿ Projecting an Image from an Angle (Geometric Correction

Tool in Image Express Utility Lite)

The Geometric Correction Tool (GCT) that is a function of the pre-installed software on the projector “Image Express

Utility Lite” allows you to correct distortion of images projected even from an angle.

What you can do with GCT

•

The GCT feature includes the following three functions

•

4-point Correction: You can ﬁt a projected image within the border of the screen easily by align the four

corners of an image to the ones of the screen.

Multi-point Correction: You can correct a distorted image on the corner of a wall or irregular shaped screen

by using many separated screens to correct the image as well as 4-point Correction.

Parameters Correction: You can correct a distorted image by using a combination of transformational rules

prepared in advance.

This section will show an example for use with 4-point Correction.

For information about “Multi-point Correction” and “Parameters Correction”, see the help ﬁle of Image Express

Utility Lite.

•

Your correction data can be stored in the projector or your computer which can be restored when necessary.

Projecting an Image from an Angle (GCT)

Preparation:

(1) Connect the projector to a computer by a USB cable. (→ page 34, USB Display)

(2) Adjust the projector position or the zoom so that the projected image can cover the whole screen area.

1. Click the “

” (Picture) icon and then the “

” button.

The “4-point Correction” window will be displayed.

2. Click the “Start Correction” button and then “Start 4-point Correction” button.

A green frame and a mouse pointer ( ) will be displayed.

• Four [ • ] marks will be appeared at four corners.

3. Use the mouse to click the [ • ] mark of which corner you wish to move.

The currently selected [ • ] mark will turn red.

3. Convenient Features

(In the above example,Windows screens are omitted for clariﬁcation.)

4. Drag the selected [ • ] mark to the point you wish to correct and drop it.

• When you click somewhere within the project image area, the nearest corner will go to the position where the

mouse cursor is.

5. Repeat Step 3 and 4 to correct the distortion of the projected image.

6. After completing, right-click the mouse.

The green frame and the mouse pointer will disappear from the projected image area. This will complete the

correction.

7. Click the “X” (close) button on the “4-point Correction” window.

The “4-point Correction” window will disappear and the 4-point correction will take effect.

8. Click the “

9. Click “Yes”.

”(Projection) icon and then the “

”(Exit) button.

TIP:

• After performing the 4-point correction, you can save the 4-point correction data to the projector by clicking “File” → “Export to

the projector…” on the “4-point Correction” window.

• See the Help of Image Express Utility Lite for operating “4-point Correction” window and other functions than GCT.

4. Using the Viewer

❶ What you can do with the Viewer

The Viewer has the following features.

•

When a commercially available USB memory that stores image ﬁles is inserted into the USB port (Type A) of the

projector, the Viewer allows you to view the image ﬁles on the USB memory.

Even if no computer is available, presentations can be conducted simply with the projector.

Supported graphic format is JPEG.

•

The Viewer displays the thumbnail screen (JPEG Exif only) on which you can jump to any speciﬁc image you wish

to project.

•

There are two ways of playback for slideshow: manual playback and auto playback. The interval time can be

changed in auto playback.

•

The order of displaying images can be set by name, date or size. Ascending or descending order can be selected.

Images can be rotated by 90 degrees during playback.

4. Using the Viewer

NOTE

• The USB port of the projector does not support USB hub.

• The USB port of the projector is common use for the wireless LAN unit. When the wireless LAN unit is installed on, you can not

utilize the VIEWER.

• The following operations by using the buttons on the projector are not possible when the VIEWER screen such as the slide screen

and the thumbnail screen is displayed.

Buttons on the cabinet

- Keystone correction by using the ▲/▼ button

- Auto Adjustment by using the AUTO ADJ. button

- Volume control with the ◀ or ▶ button

To perform Keystone correction or Source selection during display of the Viewer, press the MENU button twice to display the

menu and operate Viewer from the menu.

Remote control

- Auto Adjustment button

- Freeze button

• Executing [RESET] → [ALL DATA] from the menu will return the settings for the Viewer toolbar to the factory default.

• USB memory

- Be sure to use a USB memory device formatted with the FAT32 or FAT16 ﬁle system.

The projector does not support NTFS formatted USB memory.

If the projector does not recognize your USB memory, check if the format is supported.

To format your USB memory in your computer, refer to the document or help ﬁle that comes with your Windows.

- We do not warrant that the USB port of the projector will support all USB memories in the market.

• Supported images

- Supported ﬁle format for Viewer are as follows.

We do not warrant all the images are supported for Viewer.

Images other than mentioned in the table may not be supported.

Image type

JPEG

Extension

Description

Baseline/Exif are supported

JPG/JPEG

- Image can be displayed at a resolution up to 10000 × 10000 pixels.

- Even if images are met by the above conditions, there may be some images which cannot be played back.

- More than 200 icons (total number of image ﬁle icons and folder icons) cannot be displayed in a thumbnail screen.

- Long ﬁle/folder name will be limited to the speciﬁed length. This can be shown by bracket added.

- If one folder has many ﬁles, it takes some time to play back.

• If a single folder contains too many ﬁles, switching images will take time. To shorten switching time, reduce the number of images

contained in a single folder.

TIP:

• Exchangeable image ﬁle format (Exif) is a standard image ﬁle format used by digital cameras with the addition of speciﬁc shooting

data.

4. Using the Viewer

❷ Projecting images stored in a USB memory device

This section explains the basic operation of the Viewer.

The explanation provides the operational procedure when the Viewer toolbar (→ page 51) is set to the factory default.

- Starting the Viewer.......................................................................below

- Removing the USB memory from the projector ....................... page 49

- Exiting the Viewer .................................................................... page 49

Preparation: Before starting the Viewer, store images to the USB memory using your computer.

Starting the Viewer

1. Turn on the projector. (→ page 12)

2. Insert the USB memory into the USB port of the projec-

tor.

• Do not remove the USB memory from the projector while

it’s LED ﬂashes. Doing so may corrupt the data.

3. Press the SOURCE button on the projector cabinet.

The Viewer start screen will be displayed.

• Press the USB-A button on the remote control.

4. Using the Viewer

4. Press the ENTER button.

The thumbnail screen will be displayed. (→ page 50)

5. Use the ▲▼◀ or ▶ button to select an icon.

• The → (arrow) symbol on the right indicates there are more

pages. pressing the PAGE ▽ (page down) button will show

the next page: pressing the PAGE △ (page up) will show

the previous page.

6. Press the ENTER button.

The selected slide will be displayed.

• When a folder icon is selected, icons contained in the folder

will be displayed.

7. Press the ▶ button to select the next slide.

The slide on the right will be displayed.

• The ◀ or ▶ button can be used to select the next (right)

slide or the previous (left) slide in the thumbnail screen.

• Pressing the MENU button during display of the thumb-

nail screen, the slide screen, or the slideshow screen will

display the toolbar. The toolbar is used to select or rotate

an slide.(→ page 52)

8. Press the EXIT button when the toolbar is not displayed.

The thumbnail screen will be displayed.

• Another way to display the thumbnail screen is to press

the ENTER button.

• To close the toolbar, press the MENU button to return to the

SOURCE list, and press the MENU button again to close

the SOURCE list.

4. Using the Viewer

Removing the USB memory from the projector

1. Select the VIEWER start screen.

Press the EXIT button with no menu displayed.

2. Remove the USB memory from the projector.

Make sure that the LED on the USB memory is not ﬂashing

before removing the USB memory.

USB

NOTE: If you remove the USB memory from the projector with a slide

displayed, the projector may not operate correctly. If this happens,

turn off the projector and unplug the power cord. Wait 3 minutes, then

connect the power cord, and turn on the projector.

Exiting the Viewer

1. Press the MENU button with the slide screen or the

thumbnail screen displayed.

The control bar or the pop-up menu will be displayed.

2. Press the MENU button again.

The on-screen menu will be displayed.

3. Select a source other than [USB-A] and press the ENTER

button.

The Viewer will be exited.

TIP: To exit the Viewer using the remote control, select a source other

than [USB-A].

4. Using the Viewer

Parts of each screen

The Viewer has four screens.

(1) Viewer start screen

(3) Thumbnail screen

(6) (4)

(9) Slide screen/

(11) Slideshow screen

(5)

(7)

(2)

(8)

(10) (12)

Name

Description

(1) Viewer start screen

(2) USB icon

This screen will be displayed ﬁrst when you select the Viewer.

This icon indicates that the USB memory is inserted into the projector.

(3) Thumbnail screen

This screen will show a list of folders and image ﬁles stored in the USB memory. The

JPEG Exif ﬁles will be displayed in thumbnail screen only.

• The maximum number of image ﬁles or folders within one page is different depending

on the model.

ME401W/ME361W/ME331W/ME301W are (6 × 4 lateral by longitudinal)

ME401X/ME361X/ME331X/ME301X are (5 × 4 lateral by longitudinal)

(4) Cursor

The cursor is used to select (highlight) the folder or image ﬁle by using ▲▼◀▶ button.

This icon is used to return to the upper (parent) folder.

(5) Back icon

(6) Folder icon

This icon shows that the USB memory has folders.

(7) Page up (Page down) This icon shows further folders or image ﬁles are available in the next (previous) page.

icon

Use the ▶ button to go to the next (previous) row. The PAGE ▽ or PAGE △ on the

remote control is used to go to the next or previous page directly.

(8) Thumbnail toolbar

(9) Slide screen

(10) Slide toolbar

This toolbar is used in the thumbnail screen. Pressing the MENU button will display

this toolbar. (→ page 51)

This screen is used for manual playback. The selected image will be displayed in full

screen.

This toolbar is used in the slide screen. Pressing the MENU button will display this

toolbar. (→ page 52)

(11) Slideshow screen

(12) Slideshow toolbar

This screen is used for auto playback. The slides will be changed automatically.

This toolbar is used in the slideshow screen. Pressing the MENU button will display

this toolbar. (→ page 52)

4. Using the Viewer

Using the toolbar

1. Press the MENU button.

The toolbar will be displayed.

The SOURCE screen will be displayed as Viewer connection screen.

2. Use the ◀ or ▶ button to select an item and use the ▲ or ▼ button to select its available option.

When the cursor is placed, the selected item will be changed to yellow.

The ▲ or ▼ shows more available choices.

3. Press the ENTER button.

The selected item will be displayed.

4. Press the MENU button two times.

The toolbar will be closed and the SOURCE list will be displayed. Press the MENU button again to close the

SOURCE list.

Thumbnail toolbar

(1)

(2)

(3)

(4)

Options

Description

(1) Back

—

Goes back to the previous image. When the cursor reaches the top left of

the screen, it will go to the previous page.

(2) Forward

(3) Display

—

Goes to the next image. When the cursor reaches the bottom right of the

screen, it will go to the next page.

Closes the menu and returns to the thumbnail screen.

Closes the menu and starts the slideshow from the highlighted item.

Closes the menu and displays the slide screen.

(4) Order

Displays the icons alphabetically by name. (number before alphabet)

Displays the icons in descending order of ﬁle size.

Displays the icons in the order of creation date

4. Using the Viewer

Slide toolbar

(1)

(2)

(3)

(4)

Options

Description

Closes the menu and switches to the slide screen.

(1) Display

Closes the menu and displays the thumbnail screen.

Closes the menu and starts the slideshow from the highlighted item.

Closes the menu and displays the image in its actual size.

(2) Image

display

Closes the menu and displays the image in the projector’s maximum reso-

lution.

(3) Clockwise

—

Close the menu and rotate the image 90°clockwise

rotation

(4) Counter-

clockwise

rotation

Close the menu and rotate the image 90°counter clockwise

Slideshow toolbar

(1)

(2)

(3)

(4)

(5)

Options

Description

(1) Stop

—

Closes the menu and changes to the slide screen.

(2) Back

—

Goes back to the previous image.

(3) Forward

(4) Interval

(5) Repeat

Goes to the next image.

Speciﬁes interval time when playing back the slides.

Repeats to play back the images in the folder.

Returns to the thumbnail screen.

TIP:

• A picture icon at the center of the screen shows that the ﬁle cannot be displayed in the slide screen or thumbnail screen.

• Slide toolbar setting for rotation will be cancelled if the folder is moved from one place to another.

5. Using On-Screen Menu

❶ Using the Menus

NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected.

1. Press the MENU button on the remote control or the projector cabinet to display the menu.

NOTE: The commands such as ENTER, EXIT, ▲▼, ◀▶ in the bottom show available buttons for your operation.

2. Press the ◀▶ buttons on the remote control or the projector cabinet to display the submenu.

3. Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the ﬁrst

tab.

4. Use the ▲▼ buttons on the remote control or the projector cabinet to select the item you want to adjust or

set.

You can use the ◀▶ buttons on the remote control or the projector cabinet to select the tab you want.

5. Press the ENTER button on the remote control or the projector cabinet to display the submenu window.

6. Adjust the level or turn the selected item on or off by using the ▲▼◀▶ buttons on the remote control or the

projector cabinet.

Changes are stored until adjusted again.

7. Repeat steps 2 -6 to adjust an additional item, or press the EXIT button on the remote control or the projec-

tor cabinet to quit the menu display.

NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings.

8. Press the MENU button to close the menu.

To return to the previous menu, press the EXIT button.

5. Using On-Screen Menu

❷

Menu Elements

Tab

Slide bar

Solid triangle

Available buttons

Source

Highlight

Radio button

Wireless symbol

ECO mode symbol

High Altitude symbol

Off Timer remaining

time

Thermometer symbol

Key Lock symbol

Menu windows or dialog boxes typically have the following elements:

Highlight��Indicates the selected menu or item�

Solid triangle ��Indicates further choices are available� A highlighted triangle indicates the item is active�

Tab��Indicates a group of features in a dialog box� Selecting on any tab brings its page to the front�

Radio button��Use this round button to select an option in a dialog box�

Source ��Indicates the currently selected source�

Off Timer remaining time��Indicates the remaining countdown time when the [OFF TIMER] is preset�

Slide bar ��Indicates settings or the direction of adjustment�

ECO mode symbol��Indicates ECO MODE is set�

Key Lock symbol ��Indicates the [CONTROL PANEL LOCK] is enabled�

Thermometer symbol ��Indicates the [ECO MODE] is forcibly set to [NORMAL] mode because the internal temperature is

too high�

High Altitude symbol ��Indicates the [FAN MODE] is set to [HIGH ALTITUDE] mode�

Wireless symbol ��Indicate the wireless LAN connection is enabled�

5. Using On-Screen Menu

❸ List of Menu Items

Some menu items are not available depending on the input source.

Menu Item

Default

Options

HDMI1

HDMI2

COMPUTER

VIDEO

SOURCE

USB-A

LAN

USB-B

PRESET

1–7

GENERAL

REFERENCE

HIGH-BRIGHT, PRESENTATION, VIDEO, MOVIE, GRAPHIC, sRGB, DICOM SIM.

GAMMA CORRECTION

SCREEN SIZE

COLOR TEMPERATURE

DYNAMIC CONTRAST

IMAGE MODE

DYNAMIC, NATURAL, BLACK DETAIL

LARGE, MEDIUM, SMALL

5000, 6500, 7800, 8500, 9300, 10500

OFF, ON

STILL, MOVIE

OFF, ON

COLOR ENHANCEMENT

DETAIL SETTINGS

WHITE BALANCE

CONTRAST R

CONTRAST G

CONTRAST B

PICTURE

BRIGHTNESS R

BRIGHTNESS G

BRIGHTNESS B

CONTRAST

BRIGHTNESS

SHARPNESS

COLOR

ADJUST

HUE

RESET

CLOCK

PHASE

HORIZONTAL

VERTICAL

OVERSCAN

AUTO, 0[%], 5[%], 10[%]

IMAGE OPTIONS

ME401W/ME361W/ME331W/ME301W: AUTO, 4:3, 16:9, 15:9, 16:10,

LETTERBOX, NATIVE

ME401X/ME361X/ME331X/ME301X: AUTO, 4:3, 16:9, 15:9, 16:10, WIDE

ZOOM, NATIVE

ASPECT RATIO

POSITION (Not available on ME401W/ME361W/

ME331W/ME301W)

AUDIO

VOLUME

0–31

OFF, ON

AUTO KEYSTONE

KEYSTONE HORIZONTAL

KEYSTONE VERTICAL

PINCUSHION LEFT/RIGHT

PINCUSHION TOP/

BOTTOM

CORNERSTONE

RESET

KEYSTONE

OFF, WHITEBOARD, BLACKBOARD, BLACKBOARD (GRAY), LIGHT YELLOW,

LIGHT GREEN, LIGHT BLUE, SKY BLUE, LIGHT ROSE, PINK

OFF, AUTO ECO, NORMAL, ECO

OFF, CAPTION1, CAPTION2, CAPTION3, CAPTION4, TEXT1, TEXT2, TEXT3,

TEXT4

OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00

WALL COLOR

ECO MODE

OFF

AUTO ECO

OFF

SETUP

GENERAL

CLOSED CAPTION

OFF TIMER

OFF

ENGLISH, DEUTSCH, FRANÇAIS, ITALIANO, ESPAÑOL, SVENSKA, 日本語

DANSK, PORTUGUÊS, EŠTINA, MAGYAR, POLSKI, NEDERLANDS, SUOMI

LANGUAGE

ENGLISH

NORSK, TÜRKÇE, РУССКИЙ,

, Ελληνικά, 中文, 한국어, TIẾNG ViỆT

, 繁體中文

ROMÂNĂ, HRVATSKI, БЪЛГАРСКИ, INDONESIA, हिन्दी, ไทย,

The asterisk (*) indicates that the default setting varies depending on the signal.

5. Using On-Screen Menu

Menu Item

Default

COLOR

OFF

Options

COLOR SELECT

SOURCE DISPLAY

ID DISPLAY

ECO MESSAGE

DISPLAY TIME

COLOR, MONOCHROME

OFF, ON

AUTO 45 SEC MANUAL, AUTO 5 SEC, AUTO 15 SEC, AUTO 45 SEC

BACKGROUND

BLUE

BLUE, BLACK, LOGO

FILTER MESSAGE

ORIENTATION

5000(H)

OFF, 100[H], 500[H], 1000[H], 2000[H], 5000[H]

DESKTOP FRONT DESKTOP FRONT, CEILING REAR, DESKTOP REAR, CEILING FRONT

CONTROL PANEL LOCK

SECURITY

OFF

OFF, ON

COMMUNICATION SPEED

38400bps

OFF

4800bps, 9600bps, 19200bps, 38400bps

1–254

OFF, ON

INSTALLATION

CONTROL ID NUMBER

CONTROL ID

TEST PATTERN

AUTO ADJUST

FAN MODE

NORMAL

AUTO

OFF, NORMAL, FINE

AUTO, HIGH, HIGH ALTITUDE

RGB/

COMPONENT

AUTO

COMPUTER

VIDEO

RGB/COMPONENT, RGB, COMPONENT

SIGNAL SELECT

AUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM

ME401W/ME361W/

ME331W/ME301W:

ME401X/ME361X/

ME331X/ME301X:

OFF

WXGA MODE

DEINTERLACE

OFF, ON

OPTIONS(1)

SETUP

AUTO

HDMI1

HDMI2

LAN

OFF, ON

AUTO, NORMAL, ENHANCED

HDMI1, COMPUTER

HDMI2, COMPUTER

LAN, COMPUTER

HDMI1

HDMI2

HDMI1

HDMI2

LAN

VIDEO LEVEL

HDMI

SETTINGS

AUDIO SELECT

USB-B

USB-B, COMPUTER

OFF, ON

BEEP

STANDBY MODE

NORMAL

OFF

1:00

LAST

NORMAL, NETWORK STANDBY

OFF, ON

OFF, 0:05, 0:10, 0:15, 0:20, 0:30, 1:00

LAST, AUTO, HDMI1, HDMI2, COMPUTER, VIDEO, USB-A, LAN, USB-B

DIRECT POWER ON

AUTO POWER ON

AUTO POWER OFF

DEFAULT SOURCE SELECT

CARBON CONVERT

CURRENCY

OPTIONS(2)

$, €, JP¥, RMB¥

CURRENCY CONVERT

WIRED LAN

ENABLE

DISABLE, ENABLE

DHCP: ON

AUTO DNS: ON

SETTINGS

DHCP, IPADDRESS, SUBNET MASK, GATEWAY, AUTO DNS, DNS

WIRED LAN

RECONNECT

PROFILE

DISABLE

DISABLE, SIMPLE ACCESS POINT, SMART CONNECTION, INFRASTRUCTURE

WIRELESS LAN

RECONNECT

The asterisk (*) indicates that the default setting varies depending on the signal.

5. Using On-Screen Menu

Menu Item

Default

Options

LAMP LIFE REMAINING

LAMP HOURS USED

FILTER HOURS USED

TOTAL CARBON SAVINGS

TOTAL COST SAVINGS

SOURCE NAME

USAGE TIME

SOURCE INDEX

HORIZONTAL FREQUENCY

SOURCE(1)

VERTICAL FREQUENCY

SYNC TYPE

SEPARATE SYNC, COMPOSITE SYNC, SYNC ON GREEN, SYNC ON VIDEO

SYNC POLARITY

SCAN TYPE

SIGNAL TYPE

VIDEO TYPE

BIT DEPTH

SOURCE(2)

WIRED LAN

8[bits], 10[bits], 12[bits]

VIDEO LEVEL

IP ADDRESS

SUBNET MASK

GATEWAY

MAC ADDRESS

IP ADDRESS

SUBNET MASK

GATEWAY

INFO.

MAC ADDRESS

SSID

WIRELESS LAN

NETWORK TYPE

SECURITY

CHANNEL

SIGNAL LEVEL

PROJECTOR NAME

PIN CODE

WIRED LAN

IP ADDRESS

SSID

CONNECTION

VERSION

WIRELESS LAN

SECURITY KEY ^(*1)

FIRMWARE

DATA

PROJECTOR NAME

HOST NAME

MODEL NO.

OTHERS

SERIAL NUMBER

LAN UNIT TYPE

CONTROL ID (when [CONTROL ID] is set)

CURRENT SIGNAL

ALL DATA

RESET

CLEAR LAMP HOURS

CLEAR FILTER HOURS

The asterisk (*) indicates that the default setting varies depending on the signal.

*1 Display when [ONE-TIME] is selected as [PIN TYPE] for [SMART CONNECTION] in [PROFILE] of [WIRELESS LAN].

5. Using On-Screen Menu

❹ Menu Descriptions & Functions [SOURCE]

HDMI1 and HDMI2

Selects the HDMI compatible equipment connected to your HDMI1 or 2 IN terminal.

COMPUTER

Selects the computer connected to your COMPUTER input terminal signal.

NOTE: When the component input signal is connected to the COMPUTER IN terminal, select [COMPUTER].

VIDEO

Selects what is connected to your VIDEO input-VCR, DVD player or document camera.

USB-A

This feature enables you to make presentations using a USB memory that contains slides.

(→ page 45 “4. Using the Viewer”)

LAN

Selects a signal from the LAN port (RJ-45) or the installed USB wireless LAN unit (optional).

USB-B

Selects the computer connected to the USB(PC) port (type B) by using a commercially available USB cable.

(→ page 34)

5. Using On-Screen Menu

❺ Menu Descriptions & Functions [ADJUST]

[PICTURE]

[PRESET]

This function allows you to select optimized settings for your projected image.

You can adjust neutral tint for yellow, cyan or magenta.

There are seven factory presets optimized for various types of images. You can also use [DETAIL SETTINGS] to set

user adjustable settings to customize each gamma or color.

Your settings can be stored in [PRESET 1] to [PRESET 7].

HIGH-BRIGHT�� Recommended for use in a brightly lit room�

PRESENTATION�� Recommended for making a presentation using a PowerPoint ﬁle�

VIDEO�� Recommended for typical TV program viewing�

MOVIE �� Recommended for movies�

GRAPHIC�� Recommended for graphics�

sRGB �� Standard color values

DICOM SIM� �� Recommended for DICOM simulation format�

NOTE:

• The [DICOM SIM.] option is for training/reference only and should not be used for actual diagnosis.

• DICOM stands for Digital Imaging and Communications in Medicine. It is a standard developed by the American College of Radiol-

ogy (ACR) and the National Electrical Manufacturers Association (NEMA).

The standard speciﬁes how digital image data can be moved from system to system.

[DETAIL SETTINGS]

5. Using On-Screen Menu

[GENERAL]

Storing Your Customized Settings [REFERENCE]

This function allows you to store your customized settings in [PRESET 1] to [PRESET 7].

First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERA-

TURE].

HIGH-BRIGHT�� Recommended for use in a brightly lit room�

PRESENTATION�� Recommended for making a presentation using a PowerPoint ﬁle�

VIDEO�� Recommended for typical TV program viewing�

MOVIE �� Recommended for movies�

GRAPHIC�� Recommended for graphics�

sRGB �� Standard color values�

DICOM SIM� �� Recommended for DICOM simulation format�

Selecting Gamma Correction Mode [GAMMA CORRECTION]

Each mode is recommended for:

DYNAMIC �� Creates a high-contrast picture�

NATURAL�� Natural reproduction of the picture�

BLACK DETAIL�� Emphasizes detail in dark areas of the picture�

NOTE: This function is not available when [DICOM SIM.] is selected for [DETAIL SETTINGS].

Selecting Screen Size for DICOM SIM [SCREEN SIZE]

This function will perform gamma correction appropriate for the screen size.

LARGE�� For screen size of 110"

MEDIUM�� For screen size of 90"

SMALL�� For screen size of 70"

NOTE: This function is available only when [DICOM SIM.] is selected for [DETAIL SETTINGS].

Adjusting Color Temperature [COLOR TEMPERATURE]

This option allows you to select the color temperature of your choice.

NOTE: When [PRESENTATION] or [HIGH-BRIGHT] is selected in [REFERENCE], this function is not available.

Adjusting Brightness and Contrast [DYNAMIC CONTRAST]

This function allows you to adjust the contrast ratio optically using the built-in iris.

To increase the contrast ratio, select [ON].

Selecting Still Image Mode or Movie Mode [IMAGE MODE]

This function allows you to select the still image mode or the movie mode.

STILL�� This mode is for a still image�

MOVIE �� This mode is for a movie�

NOTE: This function is available only when [HIGH-BRIGHT] is selected for [REFERENCE].

5. Using On-Screen Menu

Enhancing the Color [COLOR ENHANCEMENT]

This function allows you to enhance the color of image.

ON �� Enhances the color�

NOTE: This function is available only when [PRESENTATION] is selected [REFERENCE].

Adjusting White Balance [WHITE BALANCE]

This allows you to adjust the white balance. Contrast for each color (RGB) to adjust the white level of the screen;

Brightness for each color (RGB) is used to adjust the black level of the screen.

[CONTRAST]

Adjusts the intensity of the image according to the incoming signal.

[BRIGHTNESS]

Adjusts the brightness level or the back raster intensity.

[SHARPNESS]

Controls the detail of the image.

[COLOR]

Increases or decreases the color saturation level.

[HUE]

Varies the color level from +/− green to +/− blue. The red level is used as reference.

Input signal

CONTRAST

Yes

BRIGHTNESS

SHARPNESS

COLOR

HUE

COMPUTER/HDMI (RGB)

COMPUTER/HDMI (COMPONENT)

USB-B

Yes

VIDEO

Yes

USB-A/LAN

Yes

Yes = Adjustable, No = Not adjustable

[RESET]

The settings and adjustments for [PICTURE] will be returned to the factory settings with the exception of the following;

Preset numbers and [REFERENCE] within the [PRESET] screen.

The settings and adjustments under [DETAIL SETTINGS] within the [PRESET] screen that are not currently selected

will not be reset.

5. Using On-Screen Menu

[IMAGE OPTIONS]

Adjusting Clock and Phase [CLOCK/PHASE]

This allows you to manually adjust CLOCK and PHASE.

CLOCK�� Use this item to ﬁne tune the computer image or to remove any vertical banding that might appear� This

function adjusts the clock frequencies that eliminate the horizontal banding in the image�

This adjustment may be necessary when you connect your computer for the ﬁrst time�

PHASE�� Use this item to adjust the clock phase or to reduce video noise, dot interference or cross talk� (This is

evident when part of your image appears to be shimmering�)

Use [PHASE] only after the [CLOCK] is complete�

5. Using On-Screen Menu

Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL]

Adjusts the image location horizontally and vertically.

An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction.

The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the

current signal. The next time you project the signal with the same resolution, horizontal and vertical frequency,

its adjustments will be called up and applied.

To delete adjustments stored in memory, from the menu, you select [RESET] → [CURRENT SIGNAL] or [ALL

DATA] and reset the adjustments.

Selecting Overscan Percentage [OVERSCAN]

Select overscan percentage (AUTO, 0%, 5% and 10%) for signal.

Projected image

Overscaned by 10%

NOTE:

• The [0[%]] cannot be selected when VIDEO signal is used.

• The [OVERSCAN] item is not available:

- when [NATIVE] is selected for [ASPECT RATIO].

5. Using On-Screen Menu

Selecting Aspect Ratio [ASPECT RATIO]

The term “aspect ratio” refers to the ratio of width to height of a projected image.

The projector automatically determines the incoming signal and displays it in its appropriate aspect ratio.

•

This table shows typical resolutions and aspect ratios that most computers support.

Resolution

640 × 480

Aspect Ratio

4:3

VGA

SVGA

XGA

800 × 600

1024 × 768

1280 × 768

1280 × 800

1440 × 900

1280 × 1024

1400 × 1050

1600 × 1200

1920 × 1200

4:3

WXGA

WXGA+

SXGA

SXGA+

UXGA

WUXGA

15:9

16:10

5:4

4:3

16:10

Options

Function

AUTO

The projector will automatically determine the incoming signal and display it in its aspect

ratio. (→ next page)

The projector may erroneously determine the aspect ratio depending on its signal. If this

occurs, select the appropriate aspect ratio from the following.

4:3

The image is displayed in 4:3 aspect ratio.

The image is displayed in 16:9 aspect ratio.

The image is displayed in 15:9 aspect ratio.

The image is displayed in 16:10 aspect ratio.

16:9

15:9

16:10

WIDE ZOOM

The image is stretched left and right.

(ME401X/ME361X/

ME331X/ME301X)

Parts of the displayed image are cropped at the left and right edges and therefore not

visible.

LETTERBOX

(ME401W/ME361W/

ME331W/ME301W)

The image of a letterbox signal is stretched equally in the horizontal and vertical direc-

tions to ﬁt the screen. Parts of the displayed image are cropped at the top and bottom

edges and therefore not visible.

NATIVE

The projector displays the current image in its true resolution when the incoming computer

signal has a lower resolution than the projector’s native resolution.

[Example 1] When the incoming

signal with the resolution of 800 ×

600 is displayed on the ME401W/

ME361W/ME331W/ME301W:

[Example 2] When the incoming

signal with the resolution of 800 ×

600 is displayed on the ME401X/

ME361X/ME331X/ME301X:

NOTE:

• When a non-computer signal is displayed, the [NATIVE] is not available.

• When a signal with a higher resolution than the projector’s native resolution is displayed, [NA-

TIVE] is not available.

5. Using On-Screen Menu

Sample image when the appropriate aspect ratio is automatically determined

ME401X/ME361X/ME331X/ME301X

[Computer signal]

Aspect ratio of incoming signal

4:3

5:4

16:9

15:9

16:10

Sample image when the appro-

priate aspect ratio is automati-

cally determined

[Video signal]

Aspect ratio of incoming signal

4:3

Letterbox

Squeeze

Sample image when the aspect

ratio is automatically determined

NOTE: To display a squeezed signal prop-

erly, select [16:9] or [WIDE ZOOM].

ME401W/ME361W/ME331W/ME301W

[Computer signal]

Aspect ratio of incoming signal

4:3

5:4

16:9

15:9

16:10

Sample image when the appro-

priate aspect ratio is automati-

cally determined

[Video signal]

Aspect ratio of incoming signal

4:3

Letterbox

Squeeze

Sample image when the aspect

ratio is automatically determined

NOTE: To display a letterbox signal prop- NOTE: To display a squeezed signal prop-

erly, select [LETTERBOX]. erly, select [16:9].

TIP:

• Image position can be adjusted vertically using [POSITION] when the [16:9], [15:9], or [16:10] aspect ratios are selected.

• The term “letterbox” refers to a more landscape-oriented image when compared to a 4:3 image, which is the standard aspect

ratio for a video source.

The letterbox signal has aspect ratios with the vista size “1.85:1” or cinema scope size “2.35:1” for movie ﬁlm.

• The term “squeeze” refers to the compressed image of which aspect ratio is converted from 16:9 to 4:3.

Adjusting the Vertical Position of Image [POSITION] (not available on ME401W/ME361W/

ME331W/ME301W)

(only when [16:9], [15:9], or [16:10] is selected for [ASPECT RATIO])

When [16:9], [15:9], or [16:10] is selected in [ASPECT RATIO], the image is displayed with black borders on the top

and bottom.

You can adjust the vertical position from the top to the bottom of the black area.

5. Using On-Screen Menu

[AUDIO]

Turning Up or Down Sound

Adjusts the volume of the projector speaker and AUDIO OUT (Stereo Mini Jack).

TIP:

• When no menus appear, the ◀ and ▶ buttons on the projector cabinet and the VOL. +/− buttons on the remote control work as

a volume control. (→ page 20)

5. Using On-Screen Menu

❻ Menu Descriptions & Functions [SETUP]

[GENERAL]

Enabling Auto Keystone [AUTO KEYSTONE]

This feature allows the projector to detect its tilt and correct vertical distortion automatically.

To turn on the AUTO KEYSTONE feature, select [ON]. To adjust the KEYSTONE feature manually, select [OFF].

NOTE:

• The [AUTO KEYSTONE] function is not available when an orientation type such as [CEILING REAR], [DESKTOP REAR], [CEILING

FRONT] other than [DESKTOP/FRONT] is selected for [ORIENTATION].

• While the [AUTO KEYSTONE] is [ON], the following functions are not available, [PINCUSHION LEFT/RIGHT], [PIN CUSHION TOP/

BOTTOM], and [CORNERSTONE].

TIP

• Adjustable angle range by the [AUTO KEYSTONE] is approx. 30 degrees in vertical direction.

• During projecting image, [AUTO KEYSTONE] will be started to perform approx. 2 seconds after ﬁxing the throw angle .

Correcting Keystone Distortion Manually [KEYSTONE]

You can correct horizontal or vertical keystone, pincushion LEFT/RIGHT or TOP/BOTTOM, or cornerstone distortion

manually.

NOTE:

• [KEYSTONE HORIZONTAL] and [KEYSTONE VERTICAL] can be adjusted at once.

• To change from one item to another item, reset the ﬁrst item.

• Adjustment values will be overwritten. They will not be deleted even when the projector is turned off.

• Using [KEYSTONE], [PINCUSHION] and [CORNERSTONE] correction can cause the image to be slightly blurred because the

correction is made electronically.

• When the [AUTO KEYSTONE] has been [ON]. it automatically performs vertical keystone correction every time the projector is

powered on.

KEYSTONE HORIZONTAL �� Corrects horizontal keystone distortion� (→ page 18)

KEYSTONE VERTICAL�� Corrects vertical keystone distortion� (→ page 18)

PINCUSHION LEFT/RIGHT�� Corrects pincushion distortion at the left or right side� (→ page 28)

PINCUSHION TOP/BOTTOM�� Corrects pincushion distortion at the top or bottom side� (→ page 28)

CORNERSTONE�� Fits a projected image within the border of the screen easily by align the four corner of an image

to the ones of the screen� (→ page 26)

RESET�� Returns all the above items to the factory preset values�

5. Using On-Screen Menu

TIP:

• Adjustable angle range in horizontal and vertical direction in the cornerstone and the keystone corrections: Approx. 30 degrees

(Max)

- Depending on input signal, the adjustable range may be narrower.

Using the Wall Color Correction [WALL COLOR]

This function allows for quick adaptive color correction in applications where the screen material is not white.

NOTE: Selecting [WHITEBOARD] reduces lamp brightness.

Setting Eco Mode [ECO MODE]

The ECO MODE increases lamp life, while lowering power consumption and cutting down on CO₂emissions.

Four brightness modes of the lamp can be selected: [OFF], [AUTO ECO], [NORMAL] and [ECO] modes.

(→ page 24)

5. Using On-Screen Menu

Setting Closed Caption [CLOSED CAPTION]

This option sets several closed caption modes that allow text to be superimposed on the projected image of Video.

OFF �� This exits the closed caption mode�

CAPTION 1-4 �� Text is superimposed�

TEXT 1-4�� Text is displayed�

NOTE:

• The closed caption is not available under the following conditions:

- when messages or menus are displayed.

- when an image is magniﬁed, frozen, or muted.

• Portions of superimposed text or closed caption may be truncated. If that happens, try to place the superimposed text or

closed caption within the screen.

Using Off Timer [OFF TIMER]

1. Select your desired time between 30 minutes and 16 hours: OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.

2. Press the ENTER button on the remote control.

3. The remaining time starts counting down.

4. The projector will turn off after the countdown is complete.

NOTE:

• To cancel the preset time, set [OFF] for the preset time or turn off the power.

• When the remaining time reaches 3 minutes before the projector is turned off, the [THE PROJECTOR WILL TURN OFF WITHIN 3

MINUTES] message will be displayed on the bottom of the screen.

Selecting Menu Language [LANGUAGE]

You can choose one of 30 languages for on-screen instructions.

NOTE: Your setting will not be affected even when [RESET] is done from the menu.

[MENU]

Selecting Menu Color [COLOR SELECT]

You can choose between two options for menu color: COLOR and MONOCHROME.

Turning On / Off Source Display [SOURCE DISPLAY]

This option turns on or off input name display such as HDMI1, HDMI2, COMPUTER, VIDEO, USB-A, LAN, USB-B,

to be displayed on the top right of the screen.

When no input signal is present, the no-signal guidance prompting you to check for an available input will be displayed.

When the [USB-A] or [LAN] item is selected for [SOURCE], the no-signal guidance will not be displayed.

5. Using On-Screen Menu

Turning ON/OFF Control ID [ID DISPLAY]

This option turns on or off the ID number which is displayed when the ID SET button on the remote control is pressed.

Turning On / Off Eco Message [ECO MESSAGE]

This option turns on or off the following messages when the projector is turned on.

The Eco Message prompts the user to save energy. When [OFF] is selected for [ECO MODE], you will get a message

to prompt you to select [AUTO ECO], [NORMAL], or [ECO] for [ECO MODE].

When [AUTO ECO], [NORMAL], or [ECO] is selected for [ECO MODE]

To close the message, press any one of the buttons. The message will disappear if no button operation is done for

30 seconds.

When [OFF] is selected for [ECO MODE]

Pressing the ENTER button will display the [ECO MODE] screen. (→ page 24)

To close the message, press the EXIT button.

Selecting Menu Display Time [DISPLAY TIME]

This option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The

preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is the

factory preset.

Selecting a Color or Logo for Background [BACKGROUND]

Use this feature to display a blue/black screen or logo when no signal is available. The default background is [BLUE].

NOTE:

• If the [LOGO] item is selected for [BACKGROUND] with the [LAN] or [USB-B] source selected, the [BLUE] item will be selected

regardless of its selection.

• When [SOURCE DISPLAY] is turned on, the no-signal guidance prompting you to check for an available input will be displayed

at the center of the screen regardless of its selection.

• Your setting will not be affected even when [RESET] is done from the menu.

Selecting Interval Time for Filter Message [FILTER MESSAGE]

This option allows you to select the time preference between displaying the message for cleaning the ﬁlters. Clean

the ﬁlter when you get the message “PLEASE CLEAN THE FILTER.” (→ page 100)

Six options are available:

OFF, 100[H], 500[H], 1000[H], 2000[H], 5000[H]

NOTE: Your setting will not be affected even when [RESET] is done from the menu.

5. Using On-Screen Menu

[INSTALLATION]

Selecting Projector Orientation [ORIENTATION]

This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection,

desktop rear projection, and ceiling front projection.

DESKTOP FRONT

CEILING REAR

DESKTOP REAR

CEILING FRONT

Disabling the Cabinet Buttons [CONTROL PANEL LOCK]

This option turns on or off the CONTROL PANEL LOCK function.

NOTE:

• This CONTROL PANEL LOCK does not affect the remote control functions.

• When the control panel is locked, pressing and holding the EXIT button on the projector cabinet for about 10 seconds will change

the setting to [OFF].

TIP: When the [CONTROL PANEL LOCK] is turned on, a key lock icon [

] will be displayed at the bottom right of the menu.

Enabling Security [SECURITY]

This feature turns on or off the SECURITY function.

Unless the correct keyword is entered, the projector cannot project an image. (→ page 30)

NOTE: Your setting will not be affected even when [RESET] is done from the menu.

5. Using On-Screen Menu

Selecting Communication Speed [COMMUNICATION SPEED]

This feature sets the baud rate of the PC Control port (D-Sub 9P). It supports data rates from 4800 to 38400 bps.

The default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending on the

equipment, a lower baud rate may be recommended for long cable runs).

NOTE: Your selected communication speed will not be affected even when [RESET] is done from the menu.

Setting ID to the Projector [CONTROL ID]

You can operate multiple projectors separately and independently with the single remote control that has the CONTROL

ID function. If you assign the same ID to all the projectors, you can conveniently operate all the projectors together

using the single remote control. To do so, you have to assign an ID number to each projector.

CONTROL ID NUMBER��Select a number from 1 to 254 you wish to assign to your projector�

CONTROL ID��Select [OFF] to turn off the CONTROL ID setting and select [ON] to turn on the CONTROL ID setting�

NOTE:

• When [ON] is selected for [CONTROL ID], the projector cannot be operated by using the remote control that does not support

the CONTROL ID function. (In this case the buttons on the projector cabinet can be used.)

• Your setting will not be affected even when [RESET] is done from the menu.

• Pressing and holding the ENTER button on the projector cabinet for 10 seconds will display the menu for canceling the Control

ID.

Assigning or Changing the Control ID

1. Turn on the projector.

2. Press the ID SET button on the remote control.

The CONTROL ID screen will be displayed.

If the projector can be operated with the current remote control ID, the [ACTIVE] will

be displayed. If the projector cannot be operated with the current remote control

ID, the [INACTIVE] will be displayed. To operate the inactive projector, assign the

control ID used for the projector by using the following procedure (Step 3).

3. Press one of numeric keypad buttons while pressing and holding the ID SET

button on the remote control.

Example:

To assign “3”, press the “3” button on the remote control.

ID SET

No ID means that all the projectors can be operated together with a single remote

control. To set “No ID”, enter “000” or press the CLEAR button.

TIP: The range of IDs is from 1 to 254.

4. Release the ID SET button.

The updated CONTROL ID screen will be displayed.

NOTE:

• The IDs can be cleared in a few days after the batteries are run down or removed.

• Accidentally pressing any one of the buttons of the remote control will clear currently speci-

ﬁed ID with batteries removed.

5. Using On-Screen Menu

Using Test Pattern [TEST PATTERN]

Displays the test pattern to check for image distortion at the time of the projector setup. Press the ENTER button to

display the test pattern; press the EXIT button to close the test pattern and return to the menu. Menu operation and

corrections for keystone, cornerstone and pincushion are not available when the test pattern is displayed.

[OPTIONS(1)]

Setting Auto Adjust [AUTO ADJUST]

This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted for

noise and stability. You can automatically make adjustment in two ways: [NORMAL] and [FINE].

OFF �� The computer signal will not be automatically adjusted� You can manually optimize the computer signal�

NORMAL�� Default setting� The computer signal will be automatically adjusted� Normally select this option�

FINE�� Select this option if ﬁne adjustment is needed� It takes more time to switch to the source than when [NOR-

MAL]is selected�

Selecting Fan Mode [FAN MODE]

This option allows you to select three modes for fan speed: Auto mode, High speed mode, and High Altitude mode.

AUTO�� The built-in fans automatically run at a variable speed according to the internal temperature�

HIGH�� The built-in fans run at high speed�

HIGH ALTITUDE�� The built-in fans run at a high speed� Select this option when using the projector at altitudes approximately

5500 feet/1700 meters or higher�

When you wish to cool down the temperature inside the projector quickly, select [HIGH].

NOTE:

• It is recommended that you select High speed mode if you use the projector non-stop for consecutive days.

• Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1700 meters or higher.

• Using the projector at altitudes approximately 5500 feet/1700 meters or higher without setting to [HIGH ALTITUDE] can cause

the projector to overheat and the protector could shut down. If this happens, wait a couple minutes and turn on the projector.

• Using the projector at altitudes less than approximately 5500 feet/1700 meters and setting to [HIGH ALTITUDE] can cause the

lamp to overcool, causing the image to ﬂicker. Switch [FAN MODE] to [AUTO].

• Using the projector at altitudes approximately 5500 feet/1700 meters or higher can shorten the life of optical components such

as the lamp.

• Your setting will not be affected even when [RESET] is done from the menu.

TIP:

• When [HIGH ALTITUDE] is selected, an icon [

] is displayed at the bottom of the on-screen menu.

5. Using On-Screen Menu

Selecting Signal Format [SIGNAL SELECT]

[COMPUTER]

Allows you to choose [COMPUTER] for an RGB source such as a computer, or [COMPONENT] for a component

video source such as a DVD player. Normally select [RGB/COMPONENT] and the projector automatically detects

a component signal. However there may be some component signals that the projector is unable to detect. If this is

the case, select [COMPONENT].

[VIDEO]

This feature enables you to select composite video standards automatically or manually.

Factory default setting is [AUTO] and the projector will automatically detect the video standard.

In the case where the projector has difficulty detecting the video standard, select the appropriate video standard from

the menu.

Enabling or Disabling WXGA Mode [WXGA MODE]

Selecting [ON] will give priority to WXGA (1280 × 768)/WUXGA (1920 × 1200) signals in recognizing an input signal.

When [WXGA MODE] is set to [ON], XGA (1024 × 768)/UXGA (1600 × 1200) signals may not be recognized on

ME401X/ME361X/ME331X/ME301X. In this case, select [OFF].

NOTE:

• [OFF] is selected at the time of shipment of ME401X/ME361X/ME331X/ME301X.

• [ON] is selected at the time of shipment of ME401W/ME361W/ME331W/ME301W.

Enabling the deinterlace [DEINTERLACE]

Turns on or off the deinterlace function for a telecine signal.

OFF �� Select this option if there is any jitter or artifacts in video�

ON �� Default standard setting�

NOTE: This feature is not available for HDTV (progressive) and computer signals.

Setting HDMI1 & HDMI2 [HDMI SETTINGS]

Make the settings for each video level when connecting HDMI1 equipment such as a DVD player.

VIDEO LEVEL�� Select [AUTO] to automatically detect video level� If automatic detection may not work well, select [NOR-

MAL] to disable the [ENHANCED] feature of your HDMI equipment or select [ENHANCED] to improve image

contrast and increase detail in the dark areas�

Setting Audio [AUDIO SELECT]

Make the settings for each audio level when connecting HDMI equipment, your network, and USB (PC) terminal.

Select between each equipment and computer.

HDMI1, HDMI2�� Select [HDMI1] or [HDMI2] to switch the HDMI1 IN or HDMI 2 IN digital audio signal or select [COMPUTER]

to switch the COMPUTER input audio signal�

LAN�� Select [LAN] or [COMPUTER] to switch the source connected to the network�

USB-B�� Select [USB-B] or [COMPUTER] to switch the source connected over the USB cable (USB-B)�

5. Using On-Screen Menu

Enabling Key Sound and Error Sound [BEEP]

This feature turns on or off the button sound or alarm when an error occurs or the following operations are performed.

- Displaying the main menu

- Switching sources

- Resetting data by using [RESET]

- Pressing POWER ON or STANDBY button

TIP:

• Volume control for {BEEP] is disabled. AV-MUTE button is not effective to stop beeping sound. If you want to activate BEEP func-

tion, set [BEEP] to [OFF].

[OPTIONS(2)]

Selecting Power-saving in [STANDBY MODE]

The projector has two standby modes: [NORMAL] and [NETWORK STANDBY].

The NORMAL mode is the mode that allows you to put the projector in the power-saving condition which consumes

less power than the NETWORK STANDBY mode.

NORMAL��POWER indicator: Red light/STATUS indicator: Off

When [NORMAL] is selected, only the following buttons and feature will work:

POWER buttons on the projector cabinet and the remote control, AUTO POWER ON, and powering

on from PC Control command�

NETWORK STANDBY��POWER indicator: Orange light/STATUS indicator: Off

When [NETWORK STANDBY] is selected, the projector can be turned on over a wired LAN connec-

tion and only the following buttons, port, and features will work:

POWER buttons on the projector cabinet and the remote control, powering on from PC Control com-

mand, AUTO POWER ON, LAN port, wireless LAN unit (optional), operation by User Supportware,

LAN feature, and Mail Alert feature�

IMPORTANT:

• When [NETWORK STANDBY] has been set for [STANDBY MODE] and the LAN has been in link-down condition for 3 minutes,

[STANDBY MODE] will transit into [NORMAL] automticially for the purpose to save the consumption power.

• When [NETWORK STANDBY] has been selected, [AUTO POWER OFF] becomes ineffective (displayed in grey) and [0:15] is selected

automatically.

NOTE:

• Even when [NORMAL] is selected for [STANDBY MODE], power on or off can be done by using the PC CONTROL port.

• The power consumption in the standby mode will not be included in calculating CO₂emission reduction.

• Your setting for [STANDBY MODE] will not be affected even when [RESET] is done from the menu.

5. Using On-Screen Menu

Enabling Direct Power On [DIRECT POWER ON]

Turns the projector on automatically when the power cord is inserted into an active power outlet. This eliminates the

need to always use the POWER button on the remote control or projector cabinet.

Turning On the Projector By Applying Computer Signal [AUTO POWER ON]

When the projector is in Standby mode, applying a computer or HDMI signal from a computer connected to the COM-

PUTER IN input, HDMI1, or HDMI2 input will power on the projector and simultaneously project the image.

This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet

to power on the projector.

To use this function, ﬁrst connect a computer to the projector and the projector to an active AC input.

NOTE:

• Disconnecting a computer signal from the computer will not power off the projector. We recommend using this function in com-

bination of the AUTO POWER OFF function.

• This function will not be available under the following conditions:

- when a component signal is applied to the COMPUTER IN terminal

- when a Sync on Green RGB signal or composite sync signal is applied

• To enable the AUTO POWER ON after turning off the projector, wait 5 seconds and input a computer or HDMI signal.

If a computer or HDMI signal is still present when the projector is turned off, the AUTO POWER ON will not work and the projector

remains in standby mode.

• Depending on the projector in use, the AUTO POWER ON may not work properly. In this case, set [STANDBY MODE] to [NETWORK

STANDBY].

Enabling Power Management [AUTO POWER OFF]

When this option is selected you can enable the projector to automatically turn off (at the selected time: 0:05, 0:10,

0:15, 0:20, 0:30, 1:00) if there is no signal received by any input or if no operation is performed.

5. Using On-Screen Menu

Selecting Default Source [DEFAULT SOURCE SELECT]

You can set the projector to default to any one of its inputs each time the projector is turned on.

LAST�� Sets the projector to default to the previous or last active input each time the projector is turned on�

AUTO�� Searches for an active source in order of HDMI1 → HDMI2 → COMPUTER → VIDEO → USB-A → COM-

PUTER and displays the ﬁrst found source�

HDMI1�� Displays the digital source from the HDMI 1 IN terminal every time the projector is turned on�

HDMI2�� Displays the digital source from the HDMI 2 IN terminal every time the projector is turned on�

COMPUTER �� Displays the computer signal from the COMPUTER IN terminal every time the projector is turned on�

VIDEO�� Displays the Video source from the VIDEO IN terminal every time the projector is turned on�

USB-A�� Displays slides or plays back movie ﬁles from the USB memory device every time the projector is turned

on�

LAN�� Displays a signal from LAN port (RJ-45) or the USB Wireless LAN Unit�

USB-B�� Displays the computer signal from the USB (PC) terminal every time the projector is turned on�

The projector does not search signal from USB-B in AUTO� For projecting image from the USB-B port, select

either USB-B or LAST�

Setting carbon footprint factor [CARBON CONVERT]

Adjusts the carbon footprint factor in the carbon saving calculation. The initial setting is 0.505[kg-CO2/kWh] based on

the CO2 Emissions from Fuel Combustion (2008 Edition) published by OECD.

Selecting your currency [CURRENCY]

Displays electricity pricing (available in 4 currency units).

$ �� US Dollar

€ �� EU Euro

JP¥ �� Japanese Yen

RMB¥ �� Chinese Yuan

Changing currency setting and currency convert setting [CURRENCY CONVERT]

Changes currency setting and currency convert setting for CARBON METER.

The initial setting are as follows:

US Dollar �� 0�11 [$/kWh]

EU Euro �� 0�19 [€/kWh]

Japanese Yen�� 20 [¥/kWh]

Chinese Yuan�� 0�48 [¥/kWh]

The initial settings for US dollar, EU Euro, and Japanese Yen are based on “Energy Prices and Taxes (second quarter

2010” published by OECD.

The initial setting for Chinese Yuan is based on “Chinese Data File (2010)” published by JETRO.

5. Using On-Screen Menu

Setting up the Projector for a Wired LAN Connection [WIRED LAN]

Important

• Consult with your network administrator about these settings.

• When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the pro-

jector. (→ page 96)

TIP: The network settings you make will not be affected even when [RESET] is done from the menu.

[WIRED LAN]

[SETTINGS]

[DISABLE]

[ENABLE]

[DHCP]

Wired LAN connection will be turned off.

Wired LAN connection will be turned on.

ON��IP address, subnet mask, and gateway will

be automatically assigned to the projector

from your DHCP server�

OFF��Specify IP address, subnet mask, and gate-

way assigned by your network administrator�

[IP ADDRESS]

[SUBNET MASK]

[GATEWAY]

Set your IP address of the network connected to the

projector.

Set your subnet mask number of the network connected

to the projector.

Set the default gateway of the network connected to the

projector.

[AUTO DNS]

ON��DHCP server will automatically assign IP

address of DNS server connected to the

projector�

OFF��Set your IP address of DNS server connected

to the projector�

[RECONNECT]

Retry to connect the projector to a network.

5. Using On-Screen Menu

Setting up the Projector for a Wireless LAN Connection (with the optional USB Wireless

LAN Unit equipped) [WIRLESS LAN]

Important

• Consult with your network administrator about these settings.

• When using a wireless LAN connection, attach the optional USB Wireless LAN to the projector. (→ page 97)

• Perform detail settings for wireless LAN on the HTTP server screen.

[PROFILE]

[DISABLE]

Wireless LAN connection will be turned off

[SIMPLE ACCESS

POINT]

Set the projector as [SIMPLE ACCESS POINT] for con-

necting to a computer and a smart phone.

[SMART CONNECTION]

Easily connect to a computer and a smart phone utilizing

the application software, MultiPresenter, installed on them.

[INFRASTRUCTURE]

Connect the projector to an access point.

[RECONNECT]

Retry to connect the projector to a network. Try this if you have changed [PROFILE].

When you connect with your computer to save your proﬁle and select "Automatically connect when within range"

from the Properties tab of Wireless Network in Windows for your selected proﬁle, your wireless LAN will be accessed

under the following conditions:

• at the time of turning on the computer or the projector

• when the notebook type is within the range of the projector's wireless LAN can be achieved.

Data transmission between wireless LAN and wired LAN is not possible.

When [SIMPLE ACCESS POINT] or [SMART CONNECTION] is set, up to 20 units can be connected simultaneously.

Recommend to connect approx. 10 units for normal operation.

5. Using On-Screen Menu

Hints on How to Set Up LAN Connection

To connect a DHCP server:

From the projector menu, select [SETUP] → [WIRED LAN] → [SETTINGS] → [DHCP] → [ON] and press the ENTER

button. To specify IP address without using the DHCP server, use the HTTP server. (→ page 39)

To set only for wireless LAN (NETWORK TYPE and WPA2 PSK):

Access the HTTP server to display the web browser (→ page 36) and select [NETWORK SETTINGS] → [SET-

TINGS] → [WIRELESS LAN] → [INFRASTRUCTURE] and then click [APPLY].

Make necessary settings for [SETTINGS], click [SAVE] for storing set values and then click [APPLY] to reﬂect

these values to wireless LAN connection.

To select an SSID:

Access the HTTP server to display the web browser (→ page 36) and select [NETWORK SETTINGS] → [SET-

TINGS] → [WIRELESS LAN] → [INFRASTRUCTURE] and then click [APPLY]. After completion of these steps,

click [SETTING] for the INFRASTRUCTURE and then click [SITE SURVEY] on the [CONNECTION] page, ﬁnally

select the SSID you want to connect on the list.

If you do not use [SITE SURVEY], type the SSID in [CONNECTION]. (→ page 40)

To receive lamp replacement time or error messages via e-mail:

Access the HTTP server to display the web browser (→ page 36) and select [NETWORK SETTINGS] → [ALERT

MAIL], and set [SENDER’S ADDRESS], [SMTP SERVER NAME], and [RECIPIENT’S ADDRESS]. Last, click

[SAVE]. (→ page 41)

5. Using On-Screen Menu

❼ Menu Descriptions & Functions [INFO.]

Displays the status of the current signal and lamp usage. This item has six pages. The information included is as follows:

TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.

[USAGE TIME]

[LAMP LIFE REMAINING] (%)*

[LAMP HOURS USED] (H)

[FILTER HOURS USED] (H)

[TOTAL CARBON SAVINGS] (kg-CO2)

[TOTAL COST SAVINGS]

The progress indicator shows the percentage of remaining bulb life.

The value informs you of the amount of lamp usage. When the remaining lamp time reaches 0, the LAMP LIFE

REMAINING bar indicator changes from 0% to 100 Hours and starts counting down.

If the remaining lamp time reaches 0 hours, the projector will not turn on.

•

The message to the effect that the lamp or the ﬁlters should be replaced will be displayed for one minute when

the projector is turned on and when the POWER button on the projector or the remote control is pressed.

To dismiss this message, press any button on the projector or the remote control.

Lamp life(H)

ECO MODE

NORMAL

5000

Replacement lamp

OFF/AUTO ECO

ECO

4000

9000

NP43LP

•

[TOTAL CARBON SAVINGS]

This displays the estimated carbon saving information in kg. The carbon footprint factor in the carbon saving

calculation is based on the OECD (2008 Edition). (→ page 25)

5. Using On-Screen Menu

[SOURCE(1)]

[SOURCE NAME]

[HORIZONTAL FREQUENCY]

[SYNC TYPE]

[SOURCE INDEX]

[VERTICAL FREQUENCY]

[SYNC POLARITY]

[SCAN TYPE]

[SOURCE(2)]

[SIGNAL TYPE]

[BIT DEPTH]

[VIDEO TYPE]

[VIDEO LEVEL]

[WIRED LAN]

[IP ADDRESS]

[GATEWAY]

[SUBNET MASK]

[MAC ADDRESS]

5. Using On-Screen Menu

[WIRELESS LAN]

[IP ADDRESS]

[GATEWAY]

[SSID]

[SECURITY]

[SIGNAL LEVEL]

[SUBNET MASK]

[MAC ADDRESS]

[NETWORK TYPE]

[CHANNEL]

[CONNECTION]

[PROJECTOR NAME]

[WIRED LAN]

[WIRELESS LAN]

[SSID]

[PIN CODE]

[IP ADDRESS]

[SECURITY KEY]

[VERSION]

[FIRMWARE] Version

[DATA] Version

5. Using On-Screen Menu

[OTHERS]

[PROJECTOR NAME]

[HOST NAME]

[MODEL NO.]

[SERIAL NUMBER]

[LAN UNIT TYPE]

[CONTROL ID] (when [CONTROL ID] is set)

5. Using On-Screen Menu

❽ Menu Descriptions & Functions [RESET]

Returning to Factory Default [RESET]

The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except

the following:

[CURRENT SIGNAL]

Resets the adjustments for the current signal to the factory preset levels.

The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS],

[ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and [OVERSCAN].

[ALL DATA]

Reset all the adjustments and settings for all the signals to the factory preset.

All items can be reset EXCEPT [LANGUAGE], [BACKGROUND], [ORIENTATION], [FILTER MESSAGE], [SECU-

RITY], [COMMUNICATION SPEED], [CONTROL ID], [STANDBY MODE], [FAN MODE], [CARBON CONVERT],

[CURRENCY], [CURRENCY CONVERT], [LAMP LIFE REMAINING], [LAMP HOURS USED], [FILTER HOURS

USED], [TOTAL CARBON SAVINGS], [WIRED LAN], and [WIRELESS LAN].

To reset the lamp usage time, see “Clearing Lamp Hour Meter [CLEAR LAMP HOURS]” below.

Clearing Lamp Hour Meter [CLEAR LAMP HOURS]

Resets the lamp clock back to zero. Selecting this option displays submenu for a conﬁrmation. Select [YES] and

press the ENTER button.

NOTE: Elapsed time of the lamp use will not be affected even when [RESET] is done from the menu.

NOTE: The projector will turn off and go into standby mode when you continue to use the projector for another 100 hours after the

lamp has reached the end of its life. In this condition you cannot clear the lamp hour meter on the menu. If this happens, press

the HELP button on the remote control for 10 seconds to reset the lamp clock back to zero. Do this only after replacing the lamp.

Clearing the Filter Usage Hours [CLEAR FILTER HOURS]

Resets the ﬁlter usage back to zero. Selecting this option displays submenu for a conﬁrmation. Select [YES] and

press the ENTER button.

NOTE: Elapsed time of the ﬁlter use will not be affected even when [RESET] is done from the menu.

6. Installation and Connections

This section describes how to set up your projector and how to connect video and audio sources.

Your projector is simple to set up and use. But before you get started, you must ﬁrst:

①

②

Set up a screen and the projector.

Connect your computer or video equip-

ment to the projector.

(→ page 90, 92, 93, 94, 95, 96, 97)

③

Connect the supplied power cord.

(→ page 11)

NOTE: Ensure that the power cord and any other

cables are disconnected before moving the pro-

jector. When moving the projector or when it is not

in use, cover the lens with the sliding lens cover.

To the wall outlet.

❶ Setting Up the Screen and the Projector

Selecting a Location

[ME401W/ME361W/ME331W/ME301W]

The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is ap-

proximately 25" (0.64 m) measured diagonally when the projector is roughly 37 inches (0.9 m) from the wall or screen.

The largest the image can be is 300" (7.6 m) when the projector is about 459 inches (11.7 m) from the wall or screen.

Screen Size (Unit: cm/inch)

646�2(W) × 403�9(H) / 254(W) × 159(H)

Screen Size

300"

516�9(W) × 323�1(H) / 204(W) × 127(H)

240"

430�8(W) × 269�2(H) / 170(W) × 106(H)

200"

387�7(W) × 242�3(H) / 153(W) × 95(H)

80"

323�1(W) × 201�9(H) / 127(W) × 79(H)

50"

258�5(W) × 161�5(H) / 102(W) × 64(H)

20"

00"

80"

60"

40"

215�4(W) × 134�6(H) / 85(W) × 53(H)

172�3(W) × 107�7(H) / 68(W) × 42(H)

129�2(W) × 80�8(H) / 51(W) × 32(H)

86�2(W) × 53�8(H) / 34(W) × 21(H)

64�6(W) × 40�4(H) / 25(W) × 16(H)

30"

53�8(W) × 33�7(H) / 21(W) × 13(H)

25"

Lens center

9.3/367

7.8/306

11.7/459

7.0/275

0.9/

5.8/229

1.1/

4.6/183

2.3/90

3.9/152

3.1/121

1.5/60

Distance (Unit: m/inch)

TIP:

• The distances are indicated by intermediate values between tele and wide. Use as a rule of thumb.

• For more details on throw distance, see page 88.

6. Installation and Connections

[ME401X/ME361X/ME331X/ME301X]

The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is ap-

proximately 25" (0.64 m) measured diagonally when the projector is roughly 35 inches (0.9 m) from the wall or screen.

The largest the image can be is 300" (7.6 m) when the projector is about 435 inches (11.0 m) from the wall or screen.

Screen Size (Unit: cm/inch)

609�6(W) × 457�2(H) / 240(W) × 180(H)

Screen Size

300"

487�7(W) × 365�8(H) / 192(W) × 144(H)

240"

406�4(W) × 304�8(H) / 160(W) × 120(H)

200"

365�8(W) × 274�3(H) / 144(W) × 108(H)

80"

304�8(W) × 228�6(H) / 120(W) × 90(H)

50"

243�8(W) × 182�9(H) / 96(W) × 72(H)

20"

00"

80"

60"

40"

203�2(W) × 152�4(H) / 80(W) × 60(H)

162�6(W) × 121�9(H) / 64(W) × 48(H)

121�9(W) × 91�4(H) / 48(W) × 36(H)

81�3(W) × 61�0(H) / 32(W) × 24(H)

61�0(W) × 45�7(H) / 24(W) × 18(H)

30"

50�8(W) × 38�1(H) / 20(W) × 15(H)

25"

Lens center

8.8/348

7.3/289

11.0/435

6.6/260

0.9/

5.5/216

1.1/

4.4/173

2.2/86

3.6/144

2.9/115

1.4/57

Distance (Unit: m/inch)

TIP:

• The distances are indicated by intermediate values between tele and wide. Use as a rule of thumb.

• For more details on throw distance, see page 88.

6. Installation and Connections

Throw Distance and Screen Size

The following shows the proper relative positions of the projector and screen. Refer to the table to determine the

position of installation.

Distance Chart

B = Vertical distance between lens center and

screen center

C = Throw distance

D = Vertical distance between lens center and

screen bottom (top of screen for ceiling ap-

plication)

Screen center

α = Throw angle

Lens center

NOTE: The values in the tables are design values and

may vary.

Screen bottom

[ME401W/ME361W/ME331W/ME301W]

Screen Size

Diagonal

Width

Height

wide

tele

wide

degree

11�4

11�3

11�2

11�0

10�9

10�8

tele

degree

6�8

6�7

6�6

6�5

inch

635

inch

538

inch

337

inch

139

inch

686

833

inch

-1

-29

1171

1415

1902

2876

3460

3850

4045

4337

4824

5798

7259

8720

9694

762

646

404

167

-1

-35

1016

1524

1829

2032

2134

2286

2540

3048

3810

4572

5080

5334

6096

6858

7620

862

538

222

1126

1712

2063

2298

2415

2591

2884

3470

4349

5228

5814

6107

6986

7865

8744

-2

-47

1292

1551

1723

1809

1939

2154

2585

3231

3877

4308

4523

5169

5816

6462

808

333

113

136

152

159

171

190

228

286

343

382

401

458

516

573

-3

-71

969

400

-3

-85

1077

1131

1212

1346

1615

2019

2423

2692

2827

3231

3635

4039

444

-4

-94

466

-4

-99

500

102

114

137

171

206

229

240

275

310

344

-4

-106

-118

-141

-177

-212

-236

-247

-283

-318

-353

100

120

150

180

200

210

240

270

300

555

-5

102

127

153

170

178

204

229

254

666

-6

833

-7

1000

1111

1166

1333

1499

1666

-8

106

111

127

143

159

-9

10181

11642

13103

14564

-10

-11

-13

-14

[ME401X/ME361X/ME331X/ME301X]

Screen Size

Diagonal

Width

Height

wide

tele

wide

degree

11�4

11�3

11�1

11�0

10�9

10�8

10�7

tele

degree

6�7

6�6

6�5

inch

635

inch

508

inch

381

inch

131

inch

649

inch

1106

1337

1798

2720

3273

3642

3826

4103

4564

5486

6869

8252

9174

9635

11018

12401

13784

inch

-2

-60

762

610

457

157

788

-3

-71

1016

1524

1829

2032

2134

2286

2540

3048

3810

4572

5080

5334

6096

6858

7620

813

610

210

1066

1622

1955

2178

2289

2456

2734

3290

4124

4958

5514

5792

6626

7460

8294

-4

-95

1219

1463

1626

1707

1829

2032

2438

3048

3658

4064

4267

4877

5486

6096

914

314

107

129

143

151

162

180

216

270

325

361

379

434

488

543

-6

-143

-171

-191

-200

-214

-238

-286

-357

-429

-476

-500

-572

-643

-714

1097

1219

1280

1372

1524

1829

2286

2743

3048

3200

3658

4115

4572

377

-7

419

-8

440

-8

471

-8

100

120

150

180

200

210

240

270

300

524

108

130

162

195

217

228

261

294

327

-9

629

-11

-14

-17

-19

-20

-23

-25

-28

120

144

160

168

192

216

240

786

108

120

126

144

162

180

943

1048

1100

1257

1414

1572

6. Installation and Connections

WARNING

* Installing your projector on the ceiling must be done by a qualiﬁed technician. Contact your NEC dealer for more

information.

* Do not attempt to install the projector yourself.

• Only use your projector on a solid, level surface. If the projector falls to the ground, you can be injured and the

projector severely damaged.

• Do not use the projector where temperatures vary greatly. The projector must be used at temperatures between

41°F (5°C) and 104°F (40°C) (Eco mode selected automatically at 95°F to 104°F/35°C to 40°C).

• Do not expose the projector to moisture, dust, or smoke. This will harm the screen image.

• Ensure that you have adequate ventilation around your projector so heat can dissipate. Do not cover the vents on

the side or the front of the projector.

Reﬂecting the Image

Using a mirror to reﬂect your projector’s image enables you to enjoy a much larger image when a smaller space is

required. Contact your NEC dealer if you need a mirror system. If you’re using a mirror system and your image is

inverted, use the MENU and ▲▼◀▶ buttons on your projector cabinet or your remote control to correct the orienta-

tion. (→ page 71)

6. Installation and Connections

❷ Making Connections

Connecting Your Computer

Computer cables, HDMI and USB can be used to connect to a computer. The connection cable is not enclosed with

the projector. Please get ready a suitable cable for the connection.

NOTE: Signals supported by Plug & Play (DDC2)

INPUT

COMPUTER IN

analog

HDMI 1 IN

digital

HDMI 2 IN

digital

Yes

HDMI cable (not supplied)

Use High Speed HDMI® Cable.

HDMI 1 IN

HDMI 2 IN

COMPUTER IN

AUDIO IN

NOTE: For Mac, use a commercially available

pin adapter (not supplied) to connect to your

Mac’s video port.

Type B

A commercially available

USB cable

(compatible with USB 2.0

speciﬁcations)

Stereo mini-plug audio cable (not supplied)

Computer cable (VGA) (supplied)

To mini D-Sub 15-pin terminal on the

projector. It is recommended that you use a

commercially available distribution ampliﬁer

if connecting a signal cable longer than the

cable supplied.

Type A

• Select the source name for its appropriate input terminal after turning on the projector.

Input terminal

COMPUTER IN

HDMI 1 IN

SOURCE button on the projector cabinet

Button on the remote control

(COMPUTER 1)

(HDMI 1*)

COMPUTER

HDMI1

HDMI 2 IN

HDMI2

(HDMI 2*)

USB (PC)

USB-B

(USB-B)

6. Installation and Connections

NOTE: The projector is not compatible with video decoded outputs of the NEC ISS-6020 switcher.

NOTE: An image may not be displayed correctly when a Video source is played back via a commercially available scan converter.

This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following.

* When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly:

Project an image to ﬁll the screen and then press the AUTO ADJ. button on the remote control or the projector cabinet.

Enabling the computer’s external display

Displaying an image on the notebook PC’s screen does not necessarily mean it outputs a signal to the projector.

When using a PC compatible laptop, a combination of function keys will enable/disable the external display.

Usually, the combination of the “Fn” key along with one of the 12 function keys gets the external display to come on or off. For

example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through external display selections.

Cautions when using a DVI signal

• When the computer has a DVI output terminal, use a commercially available converter cable to connect the computer

to the projector’s HDMI 1 or HDMI 2 input terminal (only digital video signals can be input).

HDMI 1 IN

HDMI 2 IN

AUDIO IN

NOTE: When Viewing a DVI Digital Signal

• Turn off the power of the computer and projector before connecting.

• When a video deck is connected via a scan converter, etc., the display may not be correct during fast-forwarding and rewinding.

• Use a DVI-to-HDMI cable compliant with DDWG (Digital Display Working Group) DVI (Digital Visual Interface) revision 1.0 stan-

dard.

The cable should be within 197"/5 m long.

• Turn off the projector and the PC before connecting the DVI-to-HDMI cable.

• To project a DVI digital signal: Connect the cables, turn the projector on, then select the HDMI input. Finally, turn on your PC.

Failure to do so may not activate the digital output of the graphics card resulting in no picture being displayed. Should this happen,

restart your PC.

• Do not disconnect the DVI-to-HDMI cable while the projector is running. If the signal cable has been disconnected and then

reconnected, an image may not be correctly displayed. Should this happen, restart your PC.

• The COMPUTER video input terminals support Windows Plug and Play.

• A Mac signal adapter (commercially available) may be required to connect a Mac computer.

6. Installation and Connections

Connecting an External Monitor

AUDIO OUT

MONITOR OUT (COMP.)

Computer cable (VGA) (supplied)

Computer cable (VGA) (not supplied)

Stereo mini-plug audio cable (not supplied)

You can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer

analog image you’re projecting.

NOTE:

• The AUDIO OUT jack does not support headphone terminal.

• When audio equipment is connected, the projector speaker is disabled.

• The signal output from the MONITOR OUT (COMPUTER) of this projector is for projecting image on exclusive one display.

• When no signal is applied over 3 minutes in the condition of projector standby when NETWORK STANDBY is set in the Standby

mode, output from the MONITOR OUT or AUDIO OUT terminal will be stopped. In this case pull out the computer cable and set

it back after inputting video signal

Monitor out and sleep mode:

• The MONITOR OUT (COMP.) terminal will not work when [NORMAL] is selected for [STANDBY MODE].

The MONITOR OUT (COMP.) terminal will work only in the sleep mode.

Applying a signal from the COMPUTER IN terminal will put the projector in the sleep mode, which allows you to use the MONITOR

OUT(COMP.) terminal and the AUDIO OUT mini jack.

The sleep mode is one of the standby modes. The sleep mode cannot be selected from the menu.

• In the network standby mode, sound for the last viewed computer or video source will be heard.

BNC-to- COMPUTER IN terminal converted signal will not be output in the standby mode and sleep mode.

6. Installation and Connections

Connecting Your DVD Player or Other AV Equipment

Connecting Video Input

VIDEO IN

AUDIO IN

Audio cable (not supplied)

Video cable (not sup-

plied)

Audio equipment

Audio cable (not supplied)

• Select the source name for its appropriate input terminal after turning on the projector.

SOURCE button on the projector

Input terminal

Button on the remote control

cabinet

VIDEO IN

(VIDEO)

VIDEO

NOTE: Refer to your VCR owner’s manual for more information about your equipment’s video output requirements.

NOTE: An image may not be displayed correctly when a Video source is played back in fast-forward or fast-rewind via a scan converter.

6. Installation and Connections

Connecting Component Input

COMPUTER IN

AUDIO IN

15-pin - to - RCA (female) × 3 cable adapter

(ADP-CV1E)

Stereo mini plug - to - RCA audio cable (not supplied)

Audio Equipment

Component video RCA ×

3 cable (not supplied)

DVD player

Audio cable (not supplied)

A component signal will be automatically displayed. If not, from the menu, select [SETUP] → [OPTIONS(1)] →

[SIGNAL SELECT] → [COMPUTER], and then place a check mark in the Component radio button.

• Select the source name for its appropriate input terminal after turning on the projector.

SOURCE button on the projector

Input terminal

Button on the remote control

cabinet

COMPUTER IN

COMPUTER

(COMPUTER 1)

NOTE: Refer to your DVD player’s owner’s manual for more information about your DVD player’s video output requirements.

6. Installation and Connections

Connecting HDMI Input

You can connect the HDMI output of your DVD player, hard disk player, Blu-ray player, or notebook type PC to the

HDMI IN terminal of your projector.

HDMI 1 IN

HDMI 2 IN

HDMI cable (not supplied)

Use High Speed HDMI® Cable.

Audio cable (not supplied)

•

Select the source name for its appropriate input terminal after turning on the projector.

SOURCE button on the projector

Input terminal

Button on the remote control

cabinet

HDMI1

HDMI2

HDMI 1 IN

HDMI 2 IN

(HDMI1*)

(HDMI2*)

•

When connecting the HDMI1 IN terminal (or HDMI2 terminal) of the projector to the DVD player, the projector’s

video level can be made settings in accordance with the DVD player’s video level. In the menu select [HDMI SET-

TINGS] → [VIDEO LEVEL] and make necessary settings.

If the HDMI input sound cannot be heard, in the menu select [AUDIO SELECT] → [HDMI1] or [HDMI2]. (→ page

74)

6. Installation and Connections

Connecting to a Wired LAN

The projector comes standard with a LAN port (RJ-45) which provides a LAN connection using a LAN cable.

To use a LAN connection, you are required to set the LAN on the projector menu. Select [SETUP] → [WIRED LAN].

(→ page 78).

Example of LAN connection (1)

Server

Hub

LAN cable (not supplied)

NOTE: Use a Category 5 or higher LAN

cable.

Example of LAN connection (2)

Via an wireless LAN access point, it enables to easily connect to terminals by SMART CONNECTION.

Wireless access point

Wired LAN

6. Installation and Connections

Connecting to a Wireless LAN (Optional: NP05LM series)

The USB Wireless LAN Unit also provides a wireless LAN connection. To use a wireless LAN connection, you are

required to assign an IP address to the projector.

Important:

•

If you use the projector with the USB Wireless LAN Unit in the area where the use of wireless LAN equipment is

prohibited, remove the USB Wireless LAN Unit from the projector.

•

Buy the appropriate USB Wireless LAN Unit for your country or area.

NOTE:

• The green LED on the USB Wireless LAN Unit ﬂashes to show that the USB Wireless LAN Unit is working.

• Your computer’s wireless LAN adapter (or unit) must be complied with Wi-Fi (IEEE802.11b/g/n) standard.

Attaching the USB Wireless LAN Unit

NOTE:

• The USB Wireless LAN Unit must be inserted into the USB Wireless LAN Unit port in the correct direction. It cannot be inserted

in the reverse direction. If the USB Wireless LAN Unit is inserted in the reverse direction with excessive force applied, the USB

port may break.

• Before touching the USB Wireless LAN Unit, touch a metallic object (such as a door knob or aluminum window frame) to discharge

the static electricity from your body.

• Always insert or remove the USB Wireless LAN unit when the main power is turned off. Failure to do so may cause projector

malfunction or damage to the USB wireless LAN unit. If the projector will not work correctly, turn off the projector, disconnect

the power cord, and then connect it again.

• The USB port of the projector is common use for the VIERWER. When the USB memory is installed and activate the VIEWER,

you can not utilize wireless LAN.

1. Press the POWER button to turn off the projector and set

it into standby condition, and disconnect the power cord.

2. Slowly insert the USB Wireless LAN Unit into the USB port.

Remove the cap from the USB Wireless LAN Unit, and then

insert it with the surface (side of indicator) facing down. Keep

the cap for later use.

NOTE:

• Do not force to insert the USB Wireless LAN Unit.

• Set the supplied strap onto the strap ﬁxing hole for the measure of

anti-theft and dropping-off.

Strap ﬁxing hole

To remove the USB Wireless LAN Unit, disconnect the power cord

and use the above procedure.

USB

NOTE:

• The green LED on the USB Wireless LAN Unit ﬂashes to show that Wire-

less LAN Unit is working. If the USB Wireless LAN Unit is incorrectly

attached, the blue LED will not ﬂash.

• Do not press the button on the USB Wireless LAN Unit. The button will

not work with this model.

6. Installation and Connections

Connection Example (1) [SMART CONNECTION]

Easily connect the projector to multiple terminals as computers

and smart phones by PIN code.

1. Download the application software, “MultiPresenter” from our company web site and install it onto each

terminal as a computer.

http://www.nec-display.com/dl/en/soft/multipresenter/index.html

2. Power ON the projector and display on the on-screen menu and then select as the bellows in order:

[SETUP] → [WIRELESS LAN] → [SMART CONNECTION] for [PROFILE]

3. Switch the source of the projector to [LAN].

The stand-by screen will be displayed on.

4. Launch the application software “MultiPresenter” on each terminal and input PIN CODE that is shown on

the stand-by screen.

For iOS, select SSID in advance and input the SECURITY KEY.

• Perform detail settings for the SMART CONNECTION activating the HTTP Server function. (→ page 40)

• About details of the MultiPresenter application, please refer to the manual of MultiPresenter uploaded on our com-

pany web site.

Connection Example (2) [SIMPLE ACCESS POINT]

Set the projector as SIMPLE ACCESS POINT for connecting to terminals as computers and smart phones.

6. Installation and Connections

Connection Example (3) [INFRASTRUCTURE]

Connect the projector to wired/wireless LAN via wireless LAN access point.

Wireless access point

Wired LAN

1. Connect a computer to the projector via wired LAN. (→ page 96)

2. Use the computer’s browser to display the projector’s HTTP server. (→ page 36)

3. Use an HTTP server to set the wireless LAN. (→ page 40)

Select either [SIMPLE ACCESS POINT] or [INFRASTRUCTURE] for [WIRELESS] in [SETTINGS] of [NETWORK

SETTINGS] and then perform detail settings in [SETTING].

4. Click [APPLY] to connect to the wireless LAN.

NOTE:

• To use the HTTP server function, the projector must be connected to a network. First, connect the projector to a network by the

wired LAN and then perform required settings for the wireless LAN on the HTTP server.

• If network conﬂict is occurred, the STATUS Indicator starts to blink in orange. In this case, change the IP address.

If you want to change the wireless LAN setting on the projector after setting it on the HTTP server, perform setting

change on the on-screen menu. (→ page 79)

7. Maintenance

This section describes the simple maintenance procedures you should follow to clean the ﬁlters, the lens, the cabinet,

and to replace the lamp and the ﬁlters.

❶ Cleaning the Filters

The air-ﬁlter sponge keeps dust and dirt from getting inside the projector and should be frequently cleaned. If the ﬁlter

is dirty or clogged, your projector may overheat.

WARNING

•

Please do not use a spray containing ﬂammable gas to remove dust attached to the ﬁlters, etc. Doing so may

result in ﬁres.

NOTE: The message for ﬁlter cleaning will be displayed for one minute after the projector is turned on or off. When the message is

displayed, clean the ﬁlters. The time to clean the ﬁlters is set to [5000 H] at time of shipment.

To cancel the message, press any button on the projector cabinet or the remote control.

The two-layer ﬁlter on the projector improves cooling and dust-proof capabilities compared with the conventional models.

The outsides (intake side) of the ﬁrst and second layer ﬁlters remove dust.

To clean the ﬁlter, detach the ﬁlter unit and the ﬁlter cover.

CAUTION

•

Before cleaning the ﬁlters, turn off the projector, disconnect the power cord and then allow the cabinet to cool.

Failure to do so can result in electric shock or burn injuries.

1. Push two buttons to release the ﬁlter unit and pull it out.

TIP:

The following explanation uses ﬁlters (ﬁne-texture sponge and coarse-

texture sponge) attached to the projector at the time of purchase as an

example.

Button

2. Remove the ﬁlter cover.

Notch

The ﬁlter cover is ﬁxed at six separate mounting points.

Bow the ﬁlter cover by pushing the notch slightly until it releases.

Filter unit

Filter cover

Fine-texture

sponge

3. Remove the four ﬁlters and use a vacuum cleaner to vacuum

all the dust inside.

Get rid of dust in the sponge ﬁlter.

NOTE:

• Whenever you vacuum the ﬁlter, use the soft brush attachment to

vacuum. This is to avoid damage to the ﬁlter.

• Do not wash the ﬁlter with water. Doing so can result in ﬁlter clogging.

Coarse-texture sponge

100

7. Maintenance

4. Remove dust from the ﬁlter unit and the ﬁlter cover.

Clean both outside and inside.

Coarse-texture

sponge

5. Attach the four ﬁlters to the ﬁlter unit and the ﬁlter cover.

Filter unit: Attach two coarse-texture sponge ﬁlters (large and

small) to the ﬁlter unit.

Filter cover: Attach two ﬁne-texture sponge ﬁlters (large and small)

to the ﬁlter cover.

The ﬁne-texture sponge ﬁlter has slits on it. Align these slits with

the protrusions of the ﬁlter cover.

Fine-texture

sponge

6. Attach the ﬁlter cover back to the ﬁlter unit

Align the ﬁlter unit with the ﬁlter cover and push the six protrusions

into place.

• Make sure all six mounting points are aligned properly.

7. Put the ﬁlter unit back to the projector cabinet.

Insert two catches of the tip of the ﬁlter unit into the groove of the

cabinet, and push the button to close the ﬁlter unit.

• Push the ﬁlter unit until it clicks into place.

8. Clear the ﬁlter usage hours.

Plug the power cord into the wall outlet, and then turn on the

projector.

From the menu, select [RESET] → [CLEAR FILTER HOURS]. (→

page 85)

The interval time to clean the ﬁlters is set to [OFF] at time of ship-

ment. When using the projector as it is, you do not clear the ﬁlter

usage

Groove

Button

101

7. Maintenance

❷ Cleaning the Lens

•

Turn off the projector before cleaning.

The projector has a plastic lens. Use a commercially available plastic lens cleaner.

Do not scratch or mar the lens surface as a plastic lens is easily scratched.

Never use alcohol or glass lens cleaner as doing so will cause damage to the plastic lens surface.

WARNING

•

Please do not use a spray containing ﬂammable gas to remove dust attached to the lens, etc. Doing so may

result in ﬁres.

❸ Cleaning the Cabinet

Turn off the projector, and unplug the projector before cleaning.

•

Use a dry soft cloth to wipe dust off the cabinet.

If heavily soiled, use a mild detergent.

•

Never use strong detergents or solvents such as alcohol or thinner.

When cleaning the vents or the speaker using a vacuum cleaner, do not force the brush of the vacuum cleaner

into the slits of the cabinet.

Vacuum the dust off the vents.

•

Clogged vents may cause a rise in the internal temperature of the projector, resulting in malfunction.

Do not scratch or hit the cabinet with your ﬁngers or any hard objects

Contact your dealer for cleaning the inside of the projector.

NOTE: Do not apply volatile agent such as insecticide on the cabinet, the lens, or the screen. Do not leave a rubber or vinyl product

in prolonged contact with it. Otherwise the surface ﬁnish will be deteriorated or the coating may be stripped off.

102

7. Maintenance

❹ Replacing the Lamp and the Filters

When the lamp reaches the end of its life, the LAMP indicator in the cabinet will blink red and the message “THE

LAMP HAS REACHED THE END OF ITS USABLE LIFE. PLEASE REPLACE THE LAMP AND FILTER.” will appear

(*). Even though the lamp may still be working, replace the lamp to maintain the optimal projector performance. After

replacing the lamp, be sure to clear the lamp hour meter. (→ page 85)

CAUTION

•

DO NOT TOUCH THE LAMP immediately after it has been used. It will be extremely hot. Turn the projector off

and then disconnect the power cord. Allow at least one hour for the lamp to cool before handling.

•

Use the speciﬁed lamp for safety and performance.

To order the replacement s, specify your lamp type, NP43LP. NP16LP is also available If you have.

The replacement lamp comes with ﬁlters.

•

DO NOT REMOVE ANY SCREWS except one lamp cover screw and two lamp housing screws. You could receive

an electric shock.

Do not break the glass on the lamp housing.

Keep ﬁnger prints off the glass surface on the lamp housing. Leaving ﬁnger prints on the glass surface might cause

an unwanted shadow and poor picture quality.

•

The projector will turn off and go into standby mode when you continue to use the projector for another 100 hours

after the lamp has reached the end of its life. If this happens, be sure to replace the lamp. If you continue to use

the lamp after the lamp reaches the end of its life, the lamp bulb may shatter, and pieces of glass may be scattered

in the lamp case. Do not touch them as the pieces of glass may cause injury. If this happens, contact your NEC

dealer for lamp replacement.

*NOTE: This message will be displayed under the following conditions:

• for one minute after the projector has been powered on

• when the

(POWER) button on the projector cabinet or the POWER OFF button on the remote control is pressed

To turn off the message, press any button on the projector cabinet or the remote control.

Optional lamp and tools needed for replacement:

•

Phillips screwdriver (plus-head)

Replacement lamp

Flow of Replacing the Lamp and the Filters

Step 1. Replace the lamp

Step 2. Replace the ﬁlters (→ page 106)

Step 3. Clear the lamp usage hours and the ﬁlter usage hours (→ page 107)

103

7. Maintenance

To replace the lamp:

1. Remove the lamp cover.

(1)Loosen the lamp cover screw

• The lamp cover screw is not removable.

(2)Push and slide the lamp cover off.

2. Remove the lamp housing.

(1)Loosen the two screws securing the lamp housing until the phillips screwdriver goes into a freewheeling condi-

tion.

• The two screws are not removable.

• There is an interlock on this case to prevent the risk of electrical shock. Do not attempt to circumvent this

interlock.

(2)Remove the lamp housing by holding it.

CAUTION:

Make sure that the lamp housing is cool enough before removing it.

Interlock

104

7. Maintenance

3. Install a new lamp housing.

(1)Insert a new lamp housing until the lamp housing is plugged into the socket.

(2)Push the top center of the lamp housing to secure it.

(3)Secure it in place with the two screws.

• Be sure to tighten the screws.

4. Reattach the lamp cover.

(1)Slide the lamp cover back until it snaps into place.

(2)Tighten the screw to secure the lamp cover.

• Be sure to tighten the screw.

This completes the lamp replacement.

Go on to the ﬁlter replacement.

NOTE: When you continue to use the projector for another 100 hours after the lamp has reached the end of its life, the projector

cannot turn on and the menu is not displayed.

If this happens, press the HELP button on the remote control for 10 seconds to reset the lamp clock back to zero.

When the lamp time clock is reset to zero, the LAMP indicator goes out.

105

7. Maintenance

To replace the ﬁlters:

Four ﬁlters are packaged with the replacement lamp, NP43LP.

Coase texture sponge ﬁlter: Large and small sizes (attached to the ﬁlter unit)

Fine texture sponge ﬁlter: Large and small sizes (attached to the ﬁlter cover)

The ﬁlter supplied with NP16LP is differed from ones’ material supplied with NP43LP and that material is non-woven

material.

For reading the ﬁlter replacement procedures, replace the words “ﬁne-texture sponge and coarse-texture sponge”

with “accordion soft and honeycomb hard” respectively.

NOTE:

• Replace all four ﬁlters at the same time.

• Before replacing the ﬁlters, wipe off dust and dirt from the projector cabinet.

• The projector is precision equipment. Keep out dust and dirt during ﬁlter replacement.

• Do not wash the ﬁlters with soap and water. Soap and water will damage the ﬁlter membrane.

• Put ﬁlters into place. Incorrect attachment of a ﬁlter may cause dust and dirt to get into the inside of the projector.

TIP:

While the material of ﬁlters attached to the projector at the time of purchase is different from the material of ﬁlters included with the

optional lamp, there is no difference in performance between these two types.

Before replacing the ﬁlters, replace the lamp. (→ page 103)

1. Push the catch to release the ﬁlter unit and pull it out.

2. Detach the ﬁlter cover from the ﬁlter unit.

Notch

The ﬁlter cover is ﬁxed at six separate mounting points.

Bow the ﬁlter cover by pushing it slightly until it releases.

Filter unit

Filter cover

3. Replace the four (4) ﬁlters

1. Remove the ﬁlters, and then clean the ﬁlter unit and the ﬁlter

cover.

106

7. Maintenance

2. Attach new ﬁlters.

Filter unit: Attach two coarse texture sponge ﬁlters to the

ﬁlter unit.

Filter cover: Attach two ﬁne texture sponge ﬁlters to the ﬁlter

cover.

The accordion ﬁlter has slits on it. Align these slits with the

protrusions of the ﬁlter cover.

4. Attach the ﬁlter cover back to the ﬁlter unit

Align the ﬁlter unit with the ﬁlter cover and push the protrusions

into place.

• Make sure all six mounting points are aligned properly.

5. Put the ﬁlter unit back to the projector cabinet.

Insert two catches of the tip of the ﬁlter unit into the groove of

the cabinet.

Push the ﬁlter unit until it clicks into place.

This completes the ﬁlter replacement.

Go on to the clearing lamp and ﬁlter hour meters.

To clear the lamp usage hours and the ﬁlter usage hours:

1. Place the projector where you use it.

2. Plug the power cord into the wall outlet, and then turn on the projector.

3. Clear the lamp usage hours and the ﬁlter usage hours.

1. From the menu, select [RESET] → [CLEAR LAMP HOURS] and reset the lamp usage hours.

2. Select [CLEAR FILTER HOURS].and reset the ﬁlter usage hours. (→ page 85)

107

8. Appendix

❶ Troubleshooting

This section helps you resolve problems you may encounter while setting up or using the projector.

Indicator Messages

Power Indicator

Indicator Condition

Projector Condition

The main power is off

Note

Off

–

Blinking light

Blue

0�5 sec On,

The projector is getting ready to turn on�

Wait for a moment�

0�5 sec Off

2�5 sec On,

0�5 sec Off

Off Timer is enabled�

–

Orange 0�5 sec On,

0�5 sec Off

Blue

Cooling

Wait for a moment

Steady light

The projector is turned on�

In Standby condition [NETWORK STANDBY] is –

selected for [STANDBY MODE]

–

Orange

Red

In Standby condition [NORMAL] is selected for –

[STANDBY MODE]

Status Indicator

Indicator Condition

Off

Red

Projector Condition

Note

Normal or Standby

1 cycle (0�5 sec Lamp cover error or lamp housing error

On, 2�5 sec Off)

–

Blinking light

Mount the lamp cover or lamp housing correctly�

2 cycle (0�5 sec Temperature error

On, 0�5 sec Off)

3 cycle (0�5 sec Power error

On, 0�5 sec Off)

The projector is overheated� Move the projector to

a cooler location�

Power unit is not working properly� Contact your

dealer�

4 cycle (0�5 sec Fan error

On, 0�5 sec Off)

6 cycle (0�5 sec Lamp error

On, 0�5 sec Off)

Fans will not work correctly�

Lamp fails to light� Wait a full minute and then turn

on again�

Green 1 cycle (0�5 sec Re-ﬁring the lamp (The projector is cooling down�) The projector is re-ﬁring�

On, 0�5 sec Off)

Orange 1 cycle (0�5 sec Network conﬂict

On, 2�5 sec Off)

Wait for a moment�

Both the built-in wired LAN and the wireless LAN cannot

be connected to the same network at the same time�

To use both built-in wired LAN and wireless LAN at the

same time, connect them to different networks�

NOTE: In the Standby condition, the status indicator

on the cabinet does not blink in orange even if the

network conﬂicts

Steady light

Green

Sleep mode

–

Orange

CONTROL PANEL LOCK is on�

You have pressed cabinet button when Control

Panel Lock is on�

CONTROL ID error

Remote control ID and projector ID are not matched�

Lamp Indicator

Indicator Condition

Off

Red

Projector Condition

Note

Normal

–

Blinking light

Steady light

Lamp has reached its end of life� Lamp replace- Replace the lamp�

ment message will be displayed�

Lamp has been used beyond its limit� The projector Replace the lamp�

will not turn on until the lamp is replaced�

Red

Green

In the state of [ECO MODE] ([AUTO ECO], [NOR- –

MAL], OR [ECO])

Over-Temperature Protection

If the temperature inside the projector rises too high, the over-temperature protector will automatically turn off the lamp

with the STATUS indicator blinking (2-cycle On and Off.)

Should this happen, do the following:

• Unplug the power cord after the cooling fans stop.

• Move the projector to a cooler location if the room where you are presenting is particularly too warm.

• Clean the vents if they are clogged with dust.

• Wait about 60 minutes until the inside of the projector becomes cool enough.

108

8. Appendix

Common Problems & Solutions

(→ “Power/Status/Lamp Indicator” on page 108.)

Problem

Check These Items

Does not turn on or

shut down

•

Check that the power cord is plugged in and that the power button on the projector cabinet or the remote control

is on� (→ pages 11, 12)

•

Ensure that the lamp cover is installed correctly. (→ page 105)

Check to see if the projector has overheated. If there is insufﬁcient ventilation around the projector or if the room

where you are presenting is particularly warm, move the projector to a cooler location�

Check to see if you continue to use the projector for another 100 hours after the lamp has reached the end of its

life� If so, replace the lamp� After replacing the lamp, reset the lamp hours used� (→ page 85)

The lamp may fail to light. Wait a full minute and then turn on the power again.

Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1700 meters

or higher� Using the projector at altitudes approximately 5500 feet/1700 meters or higher without setting to [HIGH

ALTITUDE] can cause the projector to overheat and the projector could shut down� If this happens, wait a couple

minutes and turn on the projector� (→ page 73)

•

If you turn on the projector immediately after the lamp is turned off, the fans run without displaying an image for

some time and then the projector will display the image� Wait for a moment�

Will turn off

No picture

•

Ensure that the [OFF TIMER] or [AUTO POWER OFF] is off. (→ page 69, 76)

Use the COMPUTER1, HDMI1, HDMI2, VIDEO, USB-A, USB-B or LAN button on the remote control to select your

source (COMPUTER, HDMI1, HDMI2, VIDEO, USB-A, LAN or USB-B)� (→ page 14) If there is still no picture,

press the button again�

•

Ensure your cables are connected properly.

Use menus to adjust the brightness and contrast. (→ page 61)

Reset the settings or adjustments to factory preset levels using the [RESET] in the Menu. (→ page 85)

Enter your registered keyword if the Security function is enabled. (→ page 30)

Be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on

the power to the notebook PC�

In most cases the output signal from the notebook PC is not turned on unless connected to the projector before

being powered up�

* If the screen goes blank while using your remote control, it may be the result of the computer’s screen-saver

or power management software�