Motorola Mbp35bl User Manual

USER’S GUIDE  
MBP35BL, MBP35BW  
BABY MONITOR  
USER’S GUIDE  
The features described in this user’s guide are subject to  
modifications without prior notice.  
Overview of your Parent unit  
1
12  
5
13  
2
11  
6
MENU  
TALK  
7
10  
9
8
3
4
1. Display (LCD screen)  
2. Up < / Down > keys  
Normal mode: Adjust  
7. Microphone  
8. Menu key m  
Press to open the Menu  
options  
speaker volume  
Menu mode: Adjust setting  
3. Power and Low battery LED  
9. Talk key t  
Press and hold to speak to  
your baby.  
)
)
)
4. Voice Activation  
LED  
5. Lullaby Play/Stop key i  
Press once to play lullaby.  
Press again to stop playing.  
10. Power key p  
Press and hold to turn on/off  
the unit.  
11. Antenna  
12. Battery cover  
13. Speaker  
6. Lullaby selection key j  
Press to select a lullaby  
during playback.  
Parent unit display symbols  
Indicates that the Baby Unit is out of range or not linked to the  
Parent Unit.  
Appears when setting the Temperature mode.  
Appears when the temperature goes above 26°C (79°F).  
Appears when the temperature goes below 14°C (57°F).  
Appears when setting the Night Light function.  
High  
Low  
Indicates that the Talk function is activated.  
Appears when the Lullaby function is activated.  
Appears when adjusting the Volume of the Parent Unit.  
Appears when adjusting the Brightness of the Parent Unit display.  
Parent Unit display symbols (cont’d)  
Appears when the Parent Unit is in registration mode.  
Appears when setting the Voice Activation level.  
VOX  
Overview of your Baby unit  
1
7
2
3
8
6
4
9
5
1. Photo sensor  
2. Camera lens  
3. Infrared LEDs  
4. Power LED  
5. Night lights  
6. On/Off switch  
7. Speaker  
8. Antenna  
9. Temperature sensor  
Important guidelines for installing your Baby Monitor  
To use your video monitor baby and parent unit together, you must  
be able to establish a radio link between them, and the range will be  
affected by environmental conditions.  
Any large metal object, like a refrigerator, a mirror, a filing cabinet,  
metallic doors or reinforced concrete, between the baby and parent  
unit may block the radio signal.  
The signal strength may also be reduced by other solid structures,  
like walls, or by radio or electrical equipment, such as TV's,  
computers, cordless or mobile phones, fluorescent lights or dimmer  
switches.  
Use of other 2.4GHz products, such as wireless networks,  
Bluetooth® systems or microwave ovens may cause interference  
with this product, so keep the baby monitor away from these types  
of products, or turn them off if they appear to be causing  
interference.  
If the signal is poor, try moving the parent and/or the baby unit to  
different positions in the rooms.  
Table of contents  
1. Safety Instructions.........................................................................6  
2. Getting started................................................................................7  
2.1 Baby unit battery installation...........................................................7  
2.2 Baby unit power supply ..................................................................8  
2.3 Parent unit battery Installation........................................................8  
2.4 Parent unit power supply................................................................9  
2.5 Registration ..................................................................................10  
3. Using the Baby Monitor MBP35BL, MBP35BW .........................11  
3.1 Setting up .....................................................................................11  
3.2 Night vision...................................................................................11  
3.3 Talk function .................................................................................11  
3.4 Adjusting the volume of the Parent Unit .......................................11  
3.5 Playing a lullaby for your baby......................................................12  
4. MBP35BL, MBP35BW Parent Unit Menu Options .....................13  
4.1 Brightness.....................................................................................13  
4.2 Temperature Display (ºC or ºF) ....................................................13  
4.3 Night Light ....................................................................................13  
4.4 Voice Activation............................................................................14  
5. Disposal of the device (environment) ........................................15  
6. Cleaning ........................................................................................16  
7. Help................................................................................................17  
8. General Information .....................................................................18  
Table of contents  
5
1. Safety Instructions  
WARNING  
This baby monitor is compliant with all relevant standards regarding  
electromagnetic fields and is, when handled as described in the User’s  
Guide, safe to use. Therefore, always read the instructions in this User’s  
Guide carefully before using the device.  
• Adult assembly is required. Keep small parts away from children when  
assembling.  
• This product is not a toy. Do not allow children to play with it.  
• This baby monitor is not a substitute for responsible adult supervision.  
• Keep this User’s Guide for future reference.  
• Do not place the baby unit or cables in the cot or within arm's reach of  
the baby (the unit should be at least 1 metre away).  
• Keep the cords out of reach of children.  
• Do not cover the baby monitor with a towel or blanket.  
• Never use extension cords with power adapters. Only use the power  
adapters provided.  
Test the baby monitor before use. Become familiar with its functions.  
• Do not use the baby monitor near water.  
• Do not install the baby monitor near a heat source.  
• Only use the chargers and power adapters provided. Do not use other  
chargers or power adapters as this may damage the device and  
batteries.  
• For the parent unit, only insert a rechargeable battery pack of the  
same type. For the baby unit, use non-rechargeable batteries and  
insert with the correct polarity, as indicated in the battery compartment  
and in “2.1 Baby unit battery installation”.  
• Do not touch the charger or plug contacts with sharp or metal objects.  
CAUTION  
Risk of explosion if battery is replaced by an incorrect type. Dispose of  
used batteries according to the instructions.  
6
Safety Instructions  
   
2. Getting started  
2.1 Baby unit battery installation  
The camera uses either 3 AA size batteries (non-rechargeable batteries  
recommended) or the household power mains. The Baby unit has no  
charging function!  
screw  
IMPORTANT  
The non-rechargeable batteries for the Baby unit are not supplied with  
your product. We recommend the batteries to be installed before use, so  
that the unit continues to work in the event of a mains power failure.  
1. Loosen the screw in a counterclockwise direction using a small  
screwdriver. Remove the battery cover.  
2. Install the 3 AA non-rechargeable batteries following the polarity as  
shown in the compartment. Close the battery compartment and  
tighten the screw in a clockwise direction.  
3. Slide the power switch to the ON position. The power LED will light up  
in green.  
To switch off the baby unit, slide the power switch to the OFF position.  
NOTE  
When the battery level is low, the power LED will turn orange and will flash.  
WARNING  
Do not mix old batteries with new ones.  
Keep batteries away from small children.  
Do not short-circuit batteries or dispose of in fire.  
Remove the batteries if this device is not going to be used for a long  
period of time.  
Getting started  
7
   
2.2 Baby unit power supply  
1. Connect the small plug of the power adapter to the baby unit and the  
other end to the mains socket (230V/50Hz).  
NOTE  
Only use the enclosed power adapter (6V DC / 800mA).  
2. Slide the power switch to the ON position. The power LED will light up  
in green.  
3. To switch off the baby unit, slide the power switch to OFF position.  
2.3 Parent unit battery Installation  
Black  
Red  
8
Getting started  
   
1. Loosen the screw in a counterclockwise direction using a small  
screwdriver. Remove the battery cover.  
2. Insert the wire tab of the rechargeable battery pack into the contact  
slot as shown above and fit the battery pack into the compartment.  
3. Close the battery compartment and tighten the screw in a clockwise  
direction.  
4. Press and hold p to switch ON the parent unit.  
- It will take a few seconds to start up the unit.  
5. Press and hold p to switch OFF the parent unit.  
NOTE  
When the battery level is low, the power LED will turn orange and will  
flash. Charge the battery pack for at least 15 hours before using on  
battery power only.  
NOTE  
When the unit is powered up with either the power adapter or using the  
rechargeable battery pack, the LED will light up in green. If both the  
power adapter and rechargeable battery pack are used, the LED will light  
up in red.  
2.4 Parent unit power supply  
1. Connect the small plug of the power adapter to the parent unit and  
the other end to the mains socket (230V/50Hz).  
NOTE  
Only use the enclosed power adapter (6V DC / 800mA).  
Getting started  
9
 
2. Press and hold p to switch ON the parent unit. The power LED  
will light up in green.  
3. Press and hold p to switch OFF the parent unit.  
NOTE  
Once the baby and parent units are switched on, the display on the parent  
unit will show the video captured by the baby unit. When the VOX mode  
is on, the screen will turn off after a few seconds if the sound near the  
baby unit drops below the Voice Activation threshold level of the unit.  
When there is no connection or out of range, the  
icon on the LCD  
display will flash and the parent unit will beep continuously. Move the  
parent unit closer to the baby unit until the link is re-established.  
2.5 Registration  
The Baby monitor is pre-registered to your Parent Unit. You do not need  
to register it again unless the Baby Unit loses its link with the Parent Unit.  
To re-register your Baby Unit, or register a new Baby Unit, follow the  
procedure below:  
1. Switch off the Baby Unit  
2. Press and hold the m button on the Parent Unit until  
appears on the display screen.  
3. Then press the m button to confirm the selection and enter the  
registration mode.  
seconds.  
..... will appear on the screen for up to 15  
4. Switch the Baby Unit ON to enter the registration mode. The power  
LED on the Baby Unit flashes quickly for approximately 3 seconds.  
The registration is completed when  
.....OK appears and then the  
video captured by Baby Unit’s camera appears on the display screen of  
the Parent Unit.  
If the registration fails then  
and Baby Unit return to normal mode.  
.....X appears and then both the Parent  
NOTE  
If a particular Baby Unit had been registered already, registering this  
current Baby Unit again will over-write the old registration.  
10  
Getting started  
 
3. Using the Baby Monitor MBP35BL,  
MBP35BW  
3.1 Setting up  
• Place the camera in a convenient location and point the lens of the  
camera towards the area you want to monitor.  
• Tilt the head of the baby unit up or down to your desired position until  
the parent unit gets a good reception of the baby.  
NOTE  
Do not place the camera within baby’s reach! If there is interference on  
the picture or sound, try moving the units to different locations, and  
ensure they are not close to other electrical equipment.  
3.2 Night vision  
The camera has 4 high-intensity infrared LEDs for picking up clear  
images in the dark. When the built-in photo sensor detects a low level of  
ambient light, the LEDs will automatically activate and the screen on the  
parent unit will display in black and white.  
NOTE  
If the ambient light near the Baby Unit is marginal, the screen may appear  
to flicker between colour and black and white.  
3.3 Talk function  
Press and hold t on the Parent unit to talk to your baby through the  
Baby unit loudspeaker. The symbol  
of the LCD screen.  
will be displayed in the middle  
3.4 Adjusting the volume of the Parent Unit  
1. Press < and > to adjust the volume (5 levels) of the Parent Unit  
during normal operations, and  
the display screen.  
(5 volume levels) appears on  
Using the Baby Monitor MBP35BL, MBP35BW  
11  
         
3.5 Playing a lullaby for your baby  
You can remotely activate a lullaby to be played on the Baby Unit.  
1. Press the i button on the Parent Unit to play the last set lullaby.  
2. To select another lullaby, press j during playback. There are 5  
lullabies available for selection, indicated by  
1
,
2
,
3
,
4
or  
5
.
3. To play all lullabies, press juntil  
4. Press i again to stop playback.  
TIPS  
is displayed on the display screen.  
• During the first 10 seconds of lullaby playback, pressing < or > will  
adjust the lullaby volume of the Baby Unit.  
display screen.  
appears on the  
• Pressing < or > after 10 seconds of lullaby playback will adjust the  
volume of the Parent Unit.  
appears on the display screen.  
12  
Using the Baby Monitor MBP35BL, MBP35BW  
 
4. MBP35BL, MBP35BW Parent Unit  
Menu Options  
4.1 Brightness  
1. Press m repeatedly until  
2. Press <and >to adjust the LCD brightness level to  
default setting is ). The LCD brightness will be adjusted accordingly.  
appears on the display screen.  
1,  
2,  
3,  
4
, or (the  
5
3
3. Press m repeatedly to exit.  
4.2 Temperature Display (ºC or ºF)  
1. Press m repeatedly until  
appears on the display screen.  
2. Press < and > to change the temperature display to ºC, ºF or OFF  
(the default setting is ºC). The temperature unit and reading will be  
changed accordingly.  
3. Press m repeatedly to exit.  
NOTE  
If the temperature goes above 26ºC (79ºF), High appears on the LCD  
screen.  
If the temperature goes below 14ºC (57ºF),  
screen.  
Low appears on the LCD  
4.3 Night Light  
The Baby Unit has a night light feature that provides a dim light and is  
controlled from the Parent Unit.  
1. Press m repeatedly until  
appears on the display screen.  
2. Press < to turn the Baby Unit Night Light ON or press > to turn the  
Night Light OFF. The night light on the Baby Unit will be switched on  
and off accordingly.  
3. Press m repeatedly to exit.  
MBP35BL, MBP35BW Parent Unit Menu Options  
13  
     
4.4 Voice Activation  
If you do not want the parent unit screen to be on continually, you can set  
the VOX mode so that the screen only turns on if there is a sound near  
the baby unit. The sound detection sensitivity level (VOX) of the Baby  
Monitor can be adjusted. If the baby is a quiet sleeper, the sensitivity level  
can be increased so that only minor disturbances will cause the parent  
unit screen to turn back on.  
1. Press m repeatedly until VOX appears on the LCD screen.  
Press < and > to adjust the VOX level to OFF,  
1
,
2
,
3
,
4
or  
5
(the default  
setting is OFF).  
)
)
)
When the VOX function is on (level  
1
to  
5
), the Voice Activation  
LED  
will be turned on, and the LCD screen will switch off after a few seconds  
if the detected sound is below the level selected.  
Note: Level is the most sensitive and so will need to be the quietest  
5
before the LCD will switch off.  
2. Press m repeatedly to exit.  
NOTE  
When the Voice Activation function is on, the voice Activation LED will be  
turned on (red) and the display screen will switch off after a few seconds.  
The LCD screen on the parent unit will be switched back on when the  
sound level of the baby reaches the Voice Activation threshold or when  
any key on the parent unit is pressed.  
14  
MBP35BL, MBP35BW Parent Unit Menu Options  
 
5. Disposal of the device  
(environment)  
At the end of the product lifecycle, you should not dispose  
of this product with normal household waste, but take the  
product to a collection point for the recycling of electrical  
and electronic equipment. The symbol on the product,  
user’s guide and/or box indicates this.  
Some of the product materials can be re-used if you take  
them to a recycling point. By reusing some parts or raw materials from  
used products you make an important contribution to the protection of the  
environment.  
Please contact your local authorities in case you need more information on  
the collection points in your area.  
Dispose of the batteries in an environmentally-friendly manner according  
to your local regulations.  
Disposal of the device (environment)  
15  
 
6. Cleaning  
Clean the MBP35BL, MBP35BW with a slightly damp cloth or with an anti-  
static cloth. Never use cleaning agents or abrasive solvents.  
Cleaning and care  
• Do not clean any part of the product with thinners or other solvents  
and chemicals –- this may cause permanent damage to the product  
which is not covered by the Warranty. When necessary, clean it with a  
damp cloth.  
• Keep your MBP35BL, MBP35BW away from hot, humid areas or  
strong sunlight, and don’t let it get wet.  
• Every effort has been made to ensure high standards of reliability for  
your MBP35BL, MBP35BW. However, if something does go wrong,  
please do not try to repair it yourself –- contact Customer Service for  
assistance.  
16  
Cleaning  
 
7. Help  
Display  
No display  
• Try recharging or replacing the batteries.  
• Reset the units. Unplug the units’ electrical power, including the  
batteries and both mains adapters, then plug them back in.  
• Is the unit turned on?  
Press and hold p on the parent unit to turn it on.  
Is the VOX mode on?  
• Turn the VOX off (see “4.4 Voice Activation”) to keep the screen on  
continually.  
Registration  
If the baby unit has lost its link with the parent unit  
• Try recharging or replacing the batteries.  
• If the baby unit is too far away it may be going out of range, so move  
the baby unit closer to the parent unit.  
• Reset the units by unplugging the units’ batteries and mains electrical  
power. Wait for around 15 seconds and plug it back in again. Allow up  
to one minute for the baby unit and the parent unit to synchronise.  
• See “2.5 Registration” if there is a need to re-register the units.  
Interference  
Noise interference on your parent unit  
• Your baby and parent units may be too close. Move them further away  
from each other.  
• Make sure there is at least 1 metre between the 2 units to avoid  
feedback howling.  
• If the baby unit is too far away it may be going out of range, so move  
the baby unit closer to the parent unit.  
• Make sure the baby and parent units are not near other electrical  
equipment, such as a television, computer or cordless/mobile telephone.  
Help  
17  
 
8. General Information  
If your product is not working properly....  
1. Read this User’s Guide or the Quick Start Guide.  
2. Visit our website:  
3. Contact Customer Service at:  
0845 218 0890 in the UK  
(65) 68412668 in Singapore  
To order a replacement battery, contact customer service or visit our  
website.  
Consumer Products and Accessories purchased in  
the United Kingdom and Singapore  
What Does this Warranty Cover?  
Subject to the exclusions and limitations contained below, Binatone  
Electronics International LTD. warrants the Motorola branded consumer  
products that it manufactures (“Products”) and the Motorola branded or  
certified accessories sold for use with these Products that it manufactures  
(“Accessories”) to be free from defects in materials and workmanship  
under normal consumer usage for the period(s) outlined below. This  
limited warranty is a consumer’s exclusive remedy, and only applies as  
follows to new Motorola branded Products and Accessories  
manufactured by Binatone Electronics International LTD., and purchased  
by consumers in the United Kingdom and Singapore, which are  
accompanied by this written warranty:  
Who is covered?  
This warranty covers only the first consumer purchaser, and is not  
transferable.  
18  
General Information  
 
What will BINATONE ELECTRONICS INTERNATIONAL LTD.  
do?  
BINATONE ELECTRONICS INTERNATIONAL LTD., at its sole option,  
will at no charge repair, replace or refund the purchase price of any  
Products or Accessories that does not conform to this warranty. Binatone  
Electronics International LTD. may use functionally equivalent  
reconditioned/ refurbished/ pre-owned or new Products, Accessories or  
parts in such repair or replacement and any Products, Accessories or  
parts removed or being replaced under this warranty become the  
property of Binatone Electronics International LTD.  
What Other Limitations Are There?  
ANY IMPLIED WARRANTIES OR CONDITIONS IRRESPECTIVE OF  
WHETHER THEY ARE IMPOSED BY LAW OR OTHERWISE,  
INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,  
SHALL BE LIMITED TO THE DURATION OF THIS LIMITED  
WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR  
REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY  
IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS  
PROVIDED IN LIEU OF ALL WARRANTIES AND MOTOROLA AND  
BINATONE ELECTRONICS INTERNATIONAL LTD. MAKES NO OTHER  
WARRANTIES OR CONDITIONS, EXPRESS OF IMPLIED. IN NO  
EVENT SHALL MOTOROLA OR BINATONE ELECTRONICS  
INTERNATIONAL LTD. BE LIABLE, WHETHER UNDER THIS LIMITED  
WARRANTY OR IN CONTRACT OR TORT (INCLUDING NEGLIGENCE  
OR STRICT PRODUCT LIABILITY) OR OTHERWISE FOR DAMAGES  
OR CLAIMS IN EXCESS OF THE PURCHASE PRICE OF THE  
PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL,  
SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS  
OF REVENUE, SAVINGS OR PROFITS, LOSS OF BUSINESS, LOSS OF  
PROGRAMS DATA INFORMATION (WHETHER CONFIDENTIAL  
PROPRIETARY OR PERSONAL IN NATURE OR OTHERWISE) OR  
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION  
WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR  
General Information  
19  
ACCESSORIES AND BINATONE ELECTRONICS INTERNATIONAL  
LTD. SHALL UNDER NO CIRCUMSTANCES BE LIABLE FOR ANY  
CLAIMS OR DEMANDS MADE BY ANY THIRD PARTY OR MADE BY  
YOU ON BEHALF OF ANY THIRD PARTY TO THE FULL EXTENT  
THESE DAMAGES OR CLAIMS MAY BE DISCLAIMED BY LAW.  
Some states, countries or jurisdictions do not allow the limitation or  
exclusion of incidental or consequential damages, or limitation on the  
length of an implied warranty, so the above limitations or exclusions may  
not apply to you in such states, countries or jurisdictions. This warranty  
gives you specific legal rights, and you may also have other rights that  
vary from state to state or from one country/jurisdiction to another.  
Products or Accessories  
Covered  
Length of Coverage  
Consumer Products  
One (1) year from the date of  
purchase by the first consumer  
purchaser of the product.  
Consumer Accessories  
Ninety (90) days from the date of  
purchase by the first consumer  
purchaser of the accessory.  
The balance of the original  
Consumer Products and  
Accessories that are Repaired warranty or for ninety (90) days  
or Replaced  
from the date returned to the  
consumer, whichever is longer.  
Exclusions  
Normal Wear and Tear. Periodic maintenance, repair and replacement  
of parts due to normal wear and tear are excluded from coverage.  
Batteries. Only batteries whose fully charged capacity falls below 80% of  
their rated capacity and batteries that leak are covered by this limited  
warranty. Battery life and the changes in battery capacity with time or use  
are excluded from this warranty.  
20  
General Information  
Abuse & Misuse. Defects or damage that result from: (a) improper or  
unreasonable use, operation, storage, misuse or abuse, accident or  
neglect or other external cause, such as physical damage (cracks,  
scratches, etc.) to the surface of the product resulting from misuse; (b)  
your failure to follow or operate outside the usage parameters stated in  
the user instructions that came with the Products or Accessories; (c)  
contact with liquid, water, rain, extreme humidity or heavy perspiration,  
sand, dirt or the like, extreme heat, or food; (d) use of the Products or  
Accessories for commercial purposes or subjecting the Product or  
Accessory to abnormal usage or conditions; or (e) other acts or omissions  
which are not the fault or neglect of Motorola or Binatone Electronics  
International LTD., are excluded from coverage.  
Use of Non-Motorola branded Products and Accessories. Defects or  
damage that result from the use of Non-Motorola branded or certified  
Products or Accessories or other peripheral equipment are excluded from  
coverage.  
Unauthorised Service or Modification. Defects or damages resulting  
from service, testing, adjustment, installation, maintenance, alteration, or  
modification in any way by someone other than Motorola, Binatone  
Electronics International LTD. or its authorised service centres, are  
excluded from coverage.  
Altered Products. Products or Accessories with (a) serial numbers or  
date tags that have been removed, altered or obliterated; (b) broken seals  
or that show evidence of tampering; (c) mismatched board serial  
numbers; or (d) nonconforming or non-Motorola branded housings, or  
parts, are excluded from coverage.  
Communication Services. Defects, damages, or the failure of Products  
or Accessories due to any communication service or signal you may  
subscribe to or use with the Products or Accessories is excluded from  
coverage.  
General Information  
21  
How to Obtain Warranty Service or Other Information?  
To obtain service or information, please call:  
0845 218 0890 in the UK  
(65) 68412668 in Singapore  
You will receive instructions on how to ship the Products or Accessories,  
the shipment of which shall be at your own risk and expense, to a  
BINATONE ELECTRONICS INTERNATIONAL LTD. Authorised Repair  
Centre. To obtain service, you must include: (a) a copy of your receipt, bill  
of sale or other comparable proof of purchase of the Products or  
Accessories showing the date of purchase; (b) a written description of the  
problem; and, most importantly; (c) your address and telephone number.  
These terms and conditions constitute the complete warranty agreement  
between you and BINATONE ELECTRONICS INTERNATIONAL LTD.  
regarding the Products or Accessories purchased by you, and supersede  
any prior agreement or representations, including representations made  
in any literature publications or promotional materials issued by  
BINATONE ELECTRONICS INTERNATIONAL LTD. or representations  
made by any agent employee or staff of BINATONE ELECTRONICS  
INTERNATIONAL LTD., that may have been made in connection with the  
said purchase.  
22  
General Information  
Technical Specifications  
Baby unit  
Frequency  
2.4GHz to 2.4835GHz  
Maximum range  
Extended range up to 450 feet*  
*Based on unobstructed line of sight. Actual range will  
vary depending on surroundings.  
Image sensor  
Lens  
Colour CMOS  
f 2.5mm, F 2.8  
4 pcs  
IR LED  
Power  
Adapter:  
Input — 100-240VAC, 50/60Hz (VDE/BS plug);  
Output — 6VDC, 800 mA  
(Supplier: Sure-power, Model: SW-060080EU/  
SW-060080BS)  
OR  
Battery: 3xAA non-rechargeable batteries  
(Note: Batteries are not included)  
Parent unit  
Frequency  
Display  
2.4GHz to 2.4835GHz  
3.5" TFT LCD  
Display colours  
Brightness control  
Power  
16.7M colour LCD  
5 steps  
Adapter:  
Input — 100-240VAC, 50/60Hz (VDE/BS plug);  
Output — 6VDC, 800 mA  
(Supplier: Sure-power, Model: SW-060080EU/  
SW-060080BS)  
OR  
Battery: Ni-MH rechargeable battery pack  
(Supplier: Desay, Model: AA2000; Supplier: TFL,  
Model: TFL3X49AA2000-CD99-01A)  
WARNING  
Do not use non-rechargeable batteries for the  
Parent Unit. Risk of explosion if battery is replaced  
by an incorrect type. Dispose of used batteries  
according to the instructions.  
General Information  
23  
Manufactured, distributed or sold by  
Binatone Electronics International LTD.,  
official licensee for this product.  
MOTOROLA and the Stylized M Logo,  
and other Motorola trademarks and trade  
dress are owned by Motorola, Inc. and  
are used under license from Motorola,  
Inc. MOTOROLA and the Stylized M  
Logo are registered in the US Patent &  
Trademark Office. All other product or  
service names are the property of their  
respective owners.  
© Motorola, Inc. 2010. All rights reserved.  
Version 1.0  
Printed in China  

Sharp Mx Tr11 User Manual
Samsung Avmc4 User Manual
Samsung Aq24a1 2 Rc User Manual
Opticon Crd 9723 Crd 9723 User Manual
DELL WL7022 User Manual
BROTHER EM 550 User Manual
BLACK DECKER BREW N GO DCM16 User Manual
ASUS RT AX88U User Manual
ACER EV S64H User Manual
ACER ASPIRE X3950 User Manual