Motorola Mbp11 User Manual

User’s Guide  
MBP11  
Baby Monitor  
The features described in this user's  
guide are subject to modifications  
without prior notice.  
1
Sound Level LED  
Overview of your Parent unit  
3 GREEN and 2 RED LEDs turn on and off in real  
time to indicate the noise level in baby's room.  
When audio is being picked up by microphone of  
baby unit, the LEDs light up to in indicate audio level  
with reference to the sensitivity setting. The more  
LEDs light up, the stronger the sound is.  
1
2
If no LED lights up it means the sound level in baby's  
room does not exceed the thresholds set through the  
parent unit.  
The LEDs are also used for indicating the speaker  
volume setting on parent unit. The louder you set the  
speaker volume, the more LEDs light up.  
2
Link Indicator  
On when the parent unit is powered on and linked to  
the baby unit.  
Flashes when the parent unit is out of range from  
baby unit.  
6
5
Off when the parent unit is powered off.  
3
4
3
4
5
6
Power  
Press and hold to power on/off the parent unit.  
Volume +  
Press to increase the speaker volume.  
Volume -  
Press to decrease the speaker volume.  
Charging Indicator  
On steadily when in charging mode.  
Flashes when low battery is detected.  
NOTE  
Off even if connected with power adapter but without  
battery pack installed.  
Important guidelines for installing our Baby  
Monitor  
Overview of your Baby unit  
To use your baby unit and parent unit together, you  
must be able to establish a radio link between them,  
and the range will be affected by environmental  
conditions.  
Any large metal object, like a refrigerator, a mirror, a  
filing cabinet, a metallic doors or reinforced concrete,  
between the baby and parent unit may block the radio  
signal.  
The signal strength may also be reduced by other solid  
structures, like walls, or by radio or electrical  
equipment, such as TV's, computers, cordless or  
mobile phones, fluorescent lights or dimmer switches.  
1
2
If the signal is poor, try moving the parent and/or the  
baby unit to different positions in the rooms.  
1
2
Power Indicator  
On when the baby unit is switched on.  
Off when the baby unit is switched off.  
Power  
Press and hold to power on/off the baby unit.  
1. SAFETY INSTRUCTIONS ..................................6  
2. GETTING STARTED...........................................7  
2.1 Baby unit power supply.....................................7  
2.2 Parent unit battery installation...........................7  
2.3 Belt clip on parent unit and baby unit................8  
3. USING YOUR BABY MONITOR.........................9  
3.1 Power on/off the parent unit..............................9  
3.2 Power on/off the baby unit ................................9  
3.3 Adjust speaker volume......................................9  
4. DISPOSAL OF THE DEVICE  
(ENVIRONMENT)..............................................10  
5. CLEANING........................................................10  
6. TROUBLESHOOTING......................................11  
7. GENERAL INFORMATION...............................12  
8. TECHNICAL SPECIFICATIONS.......................15  
EC DECLARATION OF CONFORMITY ...........16  
5
• Adult assembly is required. Keep small parts away  
from children when assembling.  
1. SAFETY INSTRUCTIONS  
• This product is not a toy. Don't allow children to play  
with it.  
• This baby monitor is not a substitute for responsible  
adult supervision.  
WARNING:  
STRANGULATION HAZARD - Keep the adapter cord  
out of baby's reach.  
• Keep this User's Guide for future reference.  
• Do not cover the baby monitor with a towel or blanket.  
• Never use extension cords with power adapters. Only  
use the power adapters provided.  
NEVER place the baby monitor or its cord within the cot.  
Secure the cord some distance away from baby's reach.  
Never use extension cords with AC Adapters. Only  
use the AC Adapters provided.  
Test this monitor and all its functions so that you are  
familiar with it prior to actual use.  
This baby monitor is compliant with all relevant standards  
regarding electromagnetic fields and is, when handled as  
described in the User's Guide, safe to use. Therefore,  
always read the instructions in this User's Guide carefully  
before using the device.  
• Do not use the baby monitor near water.  
• Do not install the baby monitor near a heat source.  
• Only use the chargers and power adapters provided.  
Do not use other chargers or power adapters as this  
may damage the device and battery pack.  
• Only insert battery pack of the same type.  
• Do not touch the plug contacts with sharp or metal  
objects.  
• Determine a location for the baby monitor that will  
provide the best audio reception of your baby in his  
cot.  
• Place the baby monitor on a flat surface, such as a  
dresser, bureau, or shelf.  
• NEVER place the baby monitor or its cord within the  
cot.  
• Secure the cord to the wall to keep cord away from the  
baby's reach.  
CAUTION  
Risk of explosion if battery is replaced by an incorrect  
type. Dispose of used batteries according to the  
instructions. Use only battery pack with rating: 2.4V  
400mAh.  
6
SAFETY INSTRUCTIONS  
   
2.2 Parent unit battery installation  
The parent unit comes with a battery pack. Charge the  
parent unit before you use it for the first time or when the  
parent unit indicates that the battery is low.  
2. GETTING STARTED  
2.1 Baby unit power supply  
Battery JACK  
Battery PLUG  
DC JACK  
DC PLUG  
1. Insert the small plug of the power adapter into the  
1. Turn the belt clip so that it is in the hanging position.  
side of the baby unit.  
2. Slide off the battery compartment cover.  
2. Connect the other end of the power adapter to the  
3. Insert the battery plug of the supplied battery pack  
mains socket.  
into the battery jack inside the compartment.  
NOTE  
4. Reattach the battery compartment cover.  
Only use the provided power adapter.  
GETTING STARTED  
7
     
5. Insert the small plug of the power adapter into the  
2.3 Belt clip on parent unit and baby unit  
side of the parent unit.  
6. Connect the other end of the power adapter to the  
mains socket.  
7. The Charging Indicator comes on.  
NOTE  
Only use the provided power adapter.  
1. Belt clip mode: applicable for parent unit only.  
2. Support stand mode: lift up and turn the belt clip  
by half turn to convert into support stand mode.  
8
GETTING STARTED  
 
3.3 Adjust speaker volume  
3. USING YOUR BABY MONITOR  
Please read these instructions carefully, and be reminded  
that this baby monitor is just intended as an aid. It is not a  
substitute for responsible, correct parental supervision.  
There are 6 volume levels on the parent unit, including  
VOLUME OFF  
.
1. Press  
or  
on the parent unit to access the  
current volume level.  
2. Press to increase or  
of the parent unit respectively.  
3.1 Power on/off the parent unit  
1. Provided the parent unit is off, press and hold 0 until  
the Link Indicator is on. The parent unit is now  
powered on and the parent unit will search for and link  
itself to the baby unit.  
to decrease the volume  
2. Provided the parent unit is on, press and hold 0 until  
the Link Indicator is off. The parent unit is now  
powered off.  
3.2 Power on/off the baby unit  
Provided the baby unit is off, press and hold 0 until the  
Power Indicator is on. The baby unit is now powered on.  
Provided the baby unit is on, press and hold 0 until the  
Power Indicator is off. The baby unit is now powered off.  
NOTE  
If you place the parent and baby units too close together,  
you will hear a high pitched noise, this is normal. The units  
are designed to be located at a distance from one  
another, e.g. in separate rooms.  
USING YOUR BABY MONITOR  
9
       
4. DISPOSAL OF THE DEVICE  
(ENVIRONMENT)  
5. CLEANING  
Clean MBP11 with a slightly damp cloth or with an anti-  
static cloth. Never use cleaning agents or abrasive  
solvents.  
At the end of the product lifecycle, you  
should not dispose of this product with  
normal household waste. Take this product  
to a collection point for the recycling of  
electrical and electronic equipment. The  
symbol on the product, user's guide and/or box indicates  
this.  
Cleaning and care  
• Do not clean any part of the product with thinners or  
other solvents and chemicals - this may cause  
permanent damage to the product which is not  
covered by the warranty.  
Some of the product materials can be re-used if you take  
them to a recycling point. By reusing some parts or raw  
materials from used products you make an important  
contribution to the protection of the environment.  
• Keep your MBP11 away from hot, humid areas or  
strong sunlight, and don't let it get wet.  
• Every effort has been made to ensure high standards  
of reliability for your MBP11. However, if something  
does go wrong, please do not try to repair it yourself -  
contact Customer Service for assistance.  
Please contact your local authorities in case you need  
more information on the collection points in your area.  
Dispose of the battery pack in an environmentally-friendly  
manner according to your local regulations.  
10  
DISPOSAL OF THE DEVICE (ENVIRONMENT)  
   
• Battery pack in parent unit is running low. Connect the  
parent unit to the mains power with the supplied power  
adaptor for recharging.  
6. TROUBLESHOOTING  
Link light on the parent unit does not come on  
• Check whether the parent unit is powered on.  
• Check whether the supplied battery pack is correctly  
installed and that it is not drained.  
• Recharge the parent unit by connecting it to the power  
supply.  
Cannot hear sound or baby cry from the parent unit  
• The volume level in the parent unit may be set too low,  
increase the volume level of the parent unit. Refer to  
section 3.3 for volume level settings.  
• The parent unit and the baby unit may be out of range  
with each other. Reduce the distance between the  
units, but not closer than 1.5 metre.  
Link light on the parent unit flashes  
• The parent unit and the baby unit may be out of range  
with each other. Reduce the distance between the  
units, but not closer than 1.5 metre.  
• The baby unit may be switched off. Press and hold 0  
key to switch on the baby unit.  
The baby monitor system produces a high-  
pitched noise  
• The parent unit and the baby unit are too close to each  
other. Make sure the parent unit and baby unit are at  
least 1.5 metre away from each other.  
• The speaker volume of the parent unit maybe set too  
high. Decrease the volume of the parent unit.  
Low battery light on the parent unit flashes  
• Battery pack in the parent unit is running low. Connect  
the parent unit to the mains power with the supplied  
power adaptor for recharging.  
Battery pack in the parent unit is running low  
quickly  
• The volume level of the parent unit may be set too high  
The parent unit beeps  
• Lost connection with the baby unit. Reduce the  
distance between the parent unit and the baby unit, but  
not closer than 1.5 metre.  
• The baby unit may be switched off. Press and hold 0  
key to switch on the baby unit.  
which consumes power. Decrease the volume level of  
the parent unit. Refer to section 3.3 for volume level  
settings.  
TROUBLESHOOTING  
11  
 
What will BINATONE do?  
7. GENERAL INFORMATION  
If your product is not working properly...  
1. Read this User's Guide.  
3. Contact Customer Service at  
BINATONE or its authorized distributor at its option and  
within a commercially reasonable time, will at no charge  
repair or replace any Products or Accessories that does  
not conform to this Warranty. We may use functionally  
equivalent reconditioned/ refurbished/ pre-owned or new  
Products, Accessories or parts.  
UK  
0845 218 0890  
ROI  
08187 62092  
What Other Limitations Are There?  
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT  
LIMITATION THE IMPLIED WARRANTIES OF  
To order a replacement battery pack for parent unit,  
contact customer service.  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, SHALL BE LIMITED TO THE DURATION OF  
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR  
OR REPLACEMENT PROVIDED UNDER THIS EXPRESS  
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF  
THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL  
OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO  
EVENT SHALL MOTOROLA OR BINATONE BE LIABLE,  
WHETHER IN CONTRACT OR TORT (INCLUDING  
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE  
PURCHASE PRICE OF THE PRODUCT OR  
Consumer Products and Accessories  
Limited Warranty ("Warranty")  
Thank you for purchasing this Motorola branded product  
manufactured under license by Binatone Electronics  
International LTD ("BINATONE")  
What Does this Warranty Cover?  
Subject to the exclusions contained below, BINATONE  
warrants that this Motorola branded product ("Product") or  
certified accessory ("Accessory") sold for use with this  
product that it manufactured to be free from defects in  
materials and workmanship under normal consumer  
usage for the period outlined below. This Warranty is your  
exclusive warranty and is not transferable.  
ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL,  
SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY  
KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF  
BUSINESS, LOSS OF INFORMATION OR OTHER  
Who is covered?  
This Warranty extends only to the first consumer  
purchaser, and is not transferable.  
12  
GENERAL INFORMATION  
 
FINANCIAL LOSS ARISING OUT OF OR IN  
CONNECTION WITH THE ABILITY OR INABILITY TO  
USE THE PRODUCTS OR ACCESSORIES TO THE FULL  
EXTENT THESE DAMAGES MAY BE DISCLAIMED BY  
LAW.  
Exclusions  
Normal Wear and Tear. Periodic maintenance, repair  
and replacement of parts due to normal wear and tear are  
excluded from coverage.  
Batteries. Only batteries whose fully charged capacity  
falls below 80% of their rated capacity and batteries that  
leak are covered by this Warranty.  
Some jurisdictions do not allow the limitation or exclusion  
of incidental or consequential damages, or limitation on  
the length of an implied warranty, so the above limitations  
or exclusions may not apply to you. This Warranty gives  
you specific legal rights, and you may also have other  
rights that vary from one jurisdiction to another.  
Abuse & Misuse. Defects or damage that result from: (a)  
improper operation, storage, misuse or abuse, accident or  
neglect, such as physical damage (cracks, scratches,  
etc.) to the surface of the product resulting from misuse;  
(b) contact with liquid, water, rain, extreme humidity or  
heavy perspiration, sand, dirt or the like, extreme heat, or  
food; (c) use of the Products or Accessories for  
commercial purposes or subjecting the Product or  
Accessory to abnormal usage or conditions; or (d) other  
acts which are not the fault of MOTOROLA or  
Products Covered  
Length of Coverage  
Consumer Products One (1) year from the date of the  
products original purchase by the  
first consumer purchaser of the  
product.  
Consumer  
Accessories  
Ninety (90) days from the date of  
the accessories original purchase  
by the first consumer purchaser  
of the product.  
BINATONE, are excluded from coverage.  
Use of Non-Motorola branded Products and  
Accessories. Defects or damage that result from the use  
of Non-Motorola branded or certified Products or  
Accessories or other peripheral equipment are excluded  
from coverage.  
Consumer Products The balance of the original  
and Accessories that warranty or for ninety (90) days  
are Repaired or  
Replaced  
from the date returned to the  
consumer, whichever is longer.  
GENERAL INFORMATION  
13  
Unauthorized Service or Modification. Defects or  
damages resulting from service, testing, adjustment,  
installation, maintenance, alteration, or modification in  
any way by someone other than MOTOROLA,  
BINATONE or its authorized service centers, are  
excluded from coverage.  
You will receive instructions on how to ship the Products  
or Accessories at your expense and risk, to a BINATONE  
Authorized Repair Center. To obtain service, you must  
include: (a) the Product or Accessory; (b) the original  
proof of purchase (receipt) which includes the date, place  
and seller of the Product; (c) if a warranty card was  
included in your box, a completed warranty card showing  
the serial number of the Product; (d) a written description  
of the problem; and, most importantly; (e) your address  
and telephone number.  
Altered Products. Products or Accessories with (a) serial  
numbers or date tags that have been removed, altered or  
obliterated; (b) broken seals or that show evidence of  
tampering; (c) mismatched board serial numbers; or (d)  
nonconforming or non-Motorola branded housings, or  
parts, are excluded from coverage.  
These terms and conditions constitute the complete  
warranty agreement between you and BINATONE  
regarding the Products or Accessories purchased by you,  
and supersede any prior agreement or representations,  
including representations made in any literature  
publications or promotional materials issued by  
BINATONE or representations made by any agent  
employee or staff of BINATONE, that may have been  
made in connection with the said purchase.  
Communication Services. Defects, damages, or the  
failure of Products or Accessories due to any  
communication service or signal you may subscribe to or  
use with the Products or Accessories is excluded from  
coverage.  
How to Obtain Warranty Service or Other  
Information?  
To obtain service or information, please call:  
UK  
0845 218 0890  
ROI  
08187 62092  
14  
GENERAL INFORMATION  
8. TECHNICAL SPECIFICATIONS  
RF frequency band 1881.792 MHz - 1897.344 MHz  
Channels  
10  
Operating  
5ºC to 45ºC  
temperature  
Baby unit voltage  
(Adapter output)  
6V DC, 450mA <Tenpao  
S004LB0600045; Salcomp VT0601>  
Parent unit voltage 2.4V 400mAh Ni-MH battery pack  
<BYD H-2/3AAA400X2-LD25; GP  
GPRHC043M027>  
Parent unit voltage 6V DC, 450mA <Tenpao  
(Adapter output)  
S004LB0600045; Salcomp VT0601>  
TECHNICAL SPECIFICATIONS  
15  
 
BINATONE TELECOM PLC  
1 Apsley Way London NW2 7HF,United Kingdom.  
Tel: +44(0) 20 8955 2700 Fax: +44(0) 20 8344 8877  
________________________________________  
.
EC Declaration of Conformity  
The product is labelled with the European Approval Marking CE as  
show. Any Unauthorized modification of the product voids this  
Declaration.  
We the manufacturer / Importer : Binatone Telecom Plc  
1 Apsley Way London  
NW2 7HF, United Kingdom.  
Declare under our sole responsibility that the following product  
Type of equipment:  
Model Name:  
Country of Origin:  
Brand:  
Digital Baby Monitor  
MBP 11  
China  
Manufacturer / Importer  
(Signature of authorized person)  
Motorola  
complies with the essential protection requirements of R&TTE  
Directive 1999/5/EC on the approximation of the laws of the Member  
States relating to Radio Spectrum Matters, the Council Directive  
2004/108/EC on the approximation of the laws of the Member States  
relating to electromagnetic compatibility (EMC) and the European  
Community Directive 2006/95/EC relating to Electrical Safety.  
Assessment of compliance of the product with the requirements  
relating to the essential requirements according to Article 3 R&TTE  
was based on Annex III of the Directive 1999/5/EC and the following  
standard:  
London, 10 Apr 11  
Signature: (Paul Tsui/ Product Operation  
Director)  
Place & Date :  
Radio Spectrum:  
EMC:  
EN301406 V2.1.1 (2009-07)  
EN301489-6 V1.3.1 (2008-08)  
EN301489-1 V1.8.1 (2008-04)  
Electrical Safety:  
EN60950-1:2006+A11:2009+A1:2010  
16  
EC DECLARATION OF CONFORMITY  
Manufactured, distributed or sold by Binatone  
Electronics International LTD., official licensee  
for this product. MOTOROLA and the Stylized  
M Logo are trademarks or registered  
trademarks of Motorola Trademark Holdings,  
LLC. and are used under license. All other  
trademarks are the property of their respective  
owners.  
© 2011 Motorola Mobility, Inc. All rights  
reserved.  
Version 4.0  
Printed in China  

York Sunline Magnum Dy 060 User Manual
Trane Ss Prc003 En User Manual
Sonic Alert Rh100 User Manual
Radio Shack Tad 1007 User Manual
Philips Se155 User Manual
JVC AV 32X35HKE User Manual
CRAFTSMAN 917.388620 User Manual
CRAFTSMAN 315.228410 User Manual
BROTHER HL L2360DW 02 User Manual
BLACK DECKER HNV115B User Manual