Operating Instructions
Upright Vacuum Cleaner
Dynamic U1
en - US
HS08
M.-Nr. 10 098 300
en - Contents
Guide to the vacuum cleaner
IMPORTANT SAFETY INSTRUCTIONS
Before the first use
Included accessories
Use
Power cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Rewinding the power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Release the vacuum cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Turning the vacuum cleaner On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
"Automatic" setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Vacuum hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Telescopic wand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Powerbrush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Turning the Powerbrush On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Maintenance and care
Purchasing new FilterBags and filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Which FilterBags and filters are the right ones? . . . . . . . . . . . . . . . . . . . . . . . . . . 14
When to change the FilterBag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Changing the FilterBag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
When to change the dust compartment filter (pre-motor filter) . . . . . . . . . . . . . . . 15
Changing the dust compartment filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
When to change the exhaust filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Replacing the "AirClean" filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Replacing the "Active AirClean 30" filter and the "HEPA AirClean 30" filter. . . . . . 16
Exchanging exhaust filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Service indicator with reset button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Removing hair and threads from the Powerbrush . . . . . . . . . . . . . . . . . . . . . . . . . 17
Blockages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Cleaning and care
Frequently asked questions
After sales service
Optional accessories
Caring for the environment
LIMITED WARRANTY - VACUUM CLENERS
USA . . . . . . . . . . . . . . . . . . . 21
3
Guide to the vacuum cleaner
The illustration shows the vacuum cleaner with all available options.
Options vary depending on model.
4
Guide to the vacuum cleaner
aHand piece
bOn/Off switch
cCarpet/Floor Powerbrush selector
dPower cord
eControl panel
fFilterBag
gDust compartment lid release
hAirflow indicator
iHeadlight *
jPowerbrush
kExhaust filter compartment
lExhaust filter *
mFoot pedal to recline vacuum
nTelescopic wand release button
oDust compartment filter (pre-motor filter)
pTelescopic wand
qRelease button
rVacuum hose with handle
sHose clip
tPower cord hook (upper)
The features marked * may vary or not be available on your model.
Back of vacuum cleaner
uAdjustable power cord hook (lower)
vUpholstery tool
wCarrying handle
xCrevice nozzle
yDust brush
zBracket for telescopic wand
5
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE
USING THIS APPLIANCE
WARNING-
To reduce the risk of electric shock,
~
To reduce the risk of fire, electric
shock or injury:
this appliance has a polarized plug
(one blade is wider than the other). This
plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to
install the proper outlet. Do not alter the
plug in any way.
Before using
Check the voltage rating of the
~
vacuum cleaner before connecting the
power cord to an electrical outlet. The
power source should correspond with
the voltage rating plate of the vacuum
cleaner. Use only household AC
outlets. Never use DC power sources. If
you are not sure of your home’s voltage
supply, consult a qualified electrician.
Connecting the vacuum cleaner to a
higher voltage may result in damage or
injury.
The electrical outlet must be fitted
with a 15 A fuse.
~
A damaged vacuum cleaner can be
~
dangerous. Check the packaging,
vacuum cleaner and accessories for
any signs of damage. Do not use a
damaged appliance.
Do not use with a damaged cord or
~
plug. If the appliance is not working as
it should, has been dropped, damaged,
left outdoors or submerged in water,
bring it to a service center.
6
IMPORTANT SAFETY INSTRUCTIONS
Use
Do not vacuum anything that is
~
burning or smoking such as cigarettes,
matches or hot ashes. The vacuum
cleaner could catch fire.
Do not use on people or animals.
~
Do not use outdoors or on wet
surfaces. Only dry surfaces should be
~
Do not vacuum toner dust. Toner,
such as that used in printers and
~
vacuumed.
Use only as described in this
manual with Miele recommended
accessories.
photocopiers, can conduct electricity.
~
Do not vacuum flammable or
~
combustible liquids, such as gasoline,
or use in areas where they may be
present.
This appliance is intended for
~
household use only.
Do not allow the vacuum cleaner to
be used as a toy. Close attention is
necessary when used near children.
Do not vacuum items which are
~
~
heavy, hard or have sharp edges. They
could cause a blockage and damage
the appliance.
Be aware, the cord clip can become
~
loose over time. Do not allow children to
come in contact with this small part.
Choking hazard.
Do not pull or carry by the cord, use
~
the cord as a handle, close a door on
the cord, or pull the cord around sharp
edges or corners. Do not run the
appliance over the cord. Keep the cord
away from heated surfaces.
Never use the vacuum cleaner
~
without the dustbag or filters in place. It
may cause damage.
Do not unplug the vacuum cleaner
~
by pulling on the cord. To unplug,
grasp the plug, not the cord.
If a dustbag is not inserted, the dust
~
compartment lid will not close. Do not
force it shut.
Do not handle the plug or vacuum
cleaner with wet hands.
~
Do not leave the vacuum cleaner
plugged in. Unplug it from the outlet
when not in use and before servicing.
~
Keep the power cord, hair, loose
~
clothing, fingers and other parts of the
body away from openings and moving
parts.
This vacuum cleaner should not be
~
used to entrap or retain any hazardous
materials.
Do not place anything into the
~
Do not use the vacuum cleaner to
~
openings of the vacuum cleaner. Do
not use if any openings are blocked;
keep them free of dust, lint, hair, or
anything that may reduce air flow.
pick up liquids or damp dirt. This could
impair the electrical safety of the
vacuum cleaner. Wait for freshly
shampooed carpets to dry.
7
IMPORTANT SAFETY INSTRUCTIONS
Turn off all controls before
unplugging.
Cleaning, maintenance and
repairs
~
Use extra care when cleaning on
stairs.
~
Turn the vacuum cleaner off after
~
each use and before every cleaning/
maintenance. Pull the plug from the
outlet.
The hose, wand and accessories
~
must not be used at head level to avoid
injury to eyes and ears.
Never submerge the vacuum
cleaner in water. Clean only with a dry
or slightly damp cloth when
disconnected from the mains supply. If
moisture gets into the appliance there
is a risk of electric shock.
~
Monitor the airflow indicator and
~
inspect all filters regularly. For best
performance, the FilterBags and filters
should be replaced when necessary. A
full bag or blocked filter will reduce the
vacuum cleaner’s suction power. A
temperature limiter automatically
switches the vacuum cleaner off if it
gets too hot, see "Frequently asked
questions".
Repairs must only be performed by
~
an authorized service agent in
accordance with national and local
safety regulations. Repairs by
unqualified persons could be
dangerous. The manufacturer cannot
be held responsible for unauthorized
work.
Using accessories
Unplug the vacuum cleaner when
~
changing accessories.
If the power cord is damaged it
~
should be replaced with a genuine
Miele cord by Technical Service.
To avoid the risk of injury when
~
vacuuming do not touch the beater bar.
Danger of injury.
Disposing of an old appliance
Do not use the vacuum hose or
~
Before discarding an old vacuum
~
telescopic wand without an accessory
attached. The rim could be damaged
and injuries could result from sharp
edges.
cleaner, please cut off the power cord
and render the plug useless. Ensure
the appliance presents no danger to
children while being stored for
disposal.
Miele FilterBags are disposable and
~
intended to be used only once. Do not
attempt to reuse them. An over stuffed
FilterBag will reduce the efficiency of
the vacuum cleaner.
SAVE THESE
Only use genuine Miele FilterBags
~
INSTRUCTIONS
with the Miele quality signet and
original Miele filter and accessories.
Only then can the manufacturer
guarantee its safety.
8
en
^ Press the exhaust filter change indi-
The illustrations referred to in the text
are shown on the fold-out pages at the
end of these operating instructions.
cator ~ (see fig. 5).
^ After about 10-15 seconds, a small
red marker will appear in the left-
hand side of the display (see fig. 6).
Before the first use
^ Close the lid of the exhaust filter com-
partment.
Assembly (see fig. 1)
^ Put the vacuum cleaner in an upright
position.
How the exhaust filter change indica-
tor works (see fig. 7).
^ Push the handle down into the body
of the vacuum cleaner until it
engages (see illustration).
The exhaust filter change indicator
displays the useful life of the exhaust
filter. The indicator will turn fully red
after approx. 50 hours of operation,
which is equivalent to one year of
average use.
Activating the exhaust filter change
indicator (see fig. 2-6)
Depending on the model, one of the
following standard exhaust filters is
installed (see fig. 2).
Included accessories (see fig. 8)
The following accessories are mounted
on the rear of the vacuum cleaner.
a AirClean Filter
b Active AirClean Filter SF-AA 30 (black)
c HEPA AirClean Filter SF-HA 30 (white)
a Upholstery tool
b Crevice nozzle, 12" (300 mm)
c Dust brush with natural bristles
If your vacuum cleaner is equipped
with a type b or c exhaust filter, you will
need to activate the exhaust filter
change indicator.
Attach the accessory you wish to use to
the handle on the vacuum hose or the
telescopic wand.
^ Open the lid of the exhaust filter
compartment and slightly pull the
exhaust filter out of its slot (see fig. 3).
Upholstery tool
For cleaning upholstery, mattresses,
cushions, draperies, etc.
^ Remove the marker strip and then
reinsert the exhaust filter (see fig. 4).
9
en
Crevice nozzle, 12" (300 mm)
Release the vacuum cleaner (see fig.
12)
For cleaning folds, crevices, corners
and tight spaces.
^ Briefly press the foot pedal and
recline the body of the vacuum
cleaner to a comfortable position.
Dust brush with natural bristles
For cleaning moldings, ornate and
carved articles, delicate items, etc.
Turning the vacuum cleaner On/Off
(see fig. 13)
The brush head can be turned to attain
the optimal cleaning position.
Always follow the flooring
manufacturer's cleaning and care
instructions.
Use
^ Press the On/Off button on the
handle.
Power cord (see fig. 9)
The lower cord hook can be rotated.
The vacuum cleaner turns on.
^ Rotate the hook upward to release
the power cord.
ComfortLine Models:
The "On" indicator on the control panel
lights yellow.
Rewinding the power cord (see fig. 10)
PremiumLine Models:
The suction power levels on the control
panel light yellow.
When the vacuum cleaner is not in use,
the power cord can be wound around
the two cord hooks.
Lighting (depending on model)
The headlight turns on automatically.
^ To prevent the cord from unwinding
press it into the locking groove of the
plug (see insert).
Control panels
Plug in the vacuum cleaner (see fig.
11)
Depending on the model, your vacuum
cleaner will include one of the following
control panels.
^ Guide the power cord through the
notch at the side and over the upper
cord hook (see illustration).
ComfortLine Models (see fig. 14)
aVacuum "On" indicator
This will keep the cord in an optimal
position so that it will not interfere with
vacuuming. It also keeps the power
cord from becoming caught in the
handle.
bOperation/Blockage protection
indicator
Yellow: the Powerbrush was turned
on using the Carpet/Floor button on
the hand piece.
Red: the beater bar is blocked
cRotary selector
10
en
Selecting the suction power setting
^ To select a higher power setting,
press the + button.
You can adjust the suction power to suit
your preference.
^ To select a lower power setting,
press the - button.
Rotary selector (see fig. 15)
The selected power level is displayed
^ Turn the suction power selector to the with a yellow light.
desired setting.
"Automatic" setting (see fig. 18)
PremiumLine Models (see fig. 16)
(models with +/- controls)
a"Automatic" button
If the "Automatic" setting is selected,
the vacuum cleaner will automatically
adjust the suction power level to suit
the surface being cleaned.
b+/- controls, to set the desired
suction power setting
c§ "Thermo" indicator
dBlockage protection indicator
eService indicator (reset button)
f"Carpet" indicator, the Powerbrush
^ Press the "Automatic" button.
The button lights yellow.
To deactivate the setting, press the
was turned on using the Carpet/Floor "Automatic" button again.
button on the hand piece.
,Do not use the this setting to
+/- Controls (see fig. 17)
vacuum draperies or other
lightweight fabrics. Excessive
suction may cause damage.
The symbols on the control panel
indicate what each setting is
recommended for:
Note (see fig. 19):
a
b
c
curtains, lightweight fabrics
upholstery, cushions
To adjust to changing floor heights,
e.g. carpet edges, thresholds, etc.,
briefly step on the release button to
raise the front of the vacuum cleaner.
thick pile carpets, rugs and
runners
(
energy saving, daily vacuuming
with low noise level
e
f
low pile carpets
hard flooring and intensive
cleaning of carpets.
11
en
Vacuum hose (see fig. 20 + 21)
The telescopic wand is composed of
two interlocking tubes that can be
adjusted to the desired length.
,Do not use the vacuum hose or
wand at head level. Injury can occur.
^ Press the telescopic wand release
button (see arrow) to release the tubes
and adjust to the desired height.
Do not use the vacuum hose or
telescopic wand without an
accessory attached. The rim could
be damaged and injuries could
result from sharp edges.
To store the wand, adjust the tubes
to the shortest length and place it
back into the bracket (see the upper
illustration).
When vacuuming stairs, ensure that
the vacuum is placed on a lower
step. Risk of injury.
Powerbrush
Recommended use
^ Place the vacuum in an upright
position.
Always follow the flooring
manufacturer's cleaning and care
instructions.
^ Press the release button on the
telescopic wand and pull the vacuum
hose handle upwards.
The Powerbrush is particularly suitable
for cleaning and restoring crushed
carpet pile of wall to wall carpeting and
floor coverings subject to hard wear,
especially in high traffic areas.
^ To increase the stability of the
vacuum cleaner, slip the elbow over
the vacuum hose so it engages.
For regular vacuuming, you will
need to snap the handle back into
the telescopic wand and place the
wand back into the bracket (see the
upper illustration).
,Do not use the Powerbrush to
vacuum high quality, hand knotted
rugs, for example Berber or Persian
rugs, as well as extremely long piled
area rugs and carpets, e.g. shag.
There is a danger of the threads
being pulled out. Turn the
Powerbrush off to vacuum these
types of floor coverings and use
only low suction power.
Telescopic wand (see fig. 22 + 23)
^ Place the vacuum in an upright
position.
^ To unhook the telescopic wand from
the bracket, pull upward on the
handle.
^ To increase the stability of the
vacuum cleaner, slip the elbow over
the vacuum hose so it engages (see
fig. 21).
12
en
Maintenance and care
,Do not use the Powerbrush on
floors with a variable or uneven
surface. The brush could come in
contact with the floor and cause
damage.
,Turn off and unplug the vacuum
cleaner before performing any
maintenance work.
The Miele filter system consists of the
following three components.
Turning the Powerbrush On/Off
(see fig. 24)
– FilterBag
The beater bar in the Powerbrush is
driven by a separate motor, which can
be switched on and off.
– Exhaust filter
– Dust compartment filter
Each of these components must be
changed periodically to maintain the
vacuum cleaner’s efficiency.
^ Press the "Carpet/Floor" button on the
handle.
The Powerbrush turns on. The indicator
on the control panel lights yellow.
Only use Miele FilterBags, filters and
accessories with the "Original Miele"
logo. Only then can the suction
power of the vacuum cleaner reach
its optimum potential creating the
best possible cleaning results.
You can also use the button to switch
off the Powerbrush while vacuuming,
for example when moving from carpet
to hard floors.
The Powerbrush automatically shuts
off anytime the body of the vacuum
cleaner is placed into the full upright
position.
,The use of FilterBags made of
paper or a similar material, or
FilterBags with a cardboard
^ For best results, move the
Powerbrush slowly back and forth
over the area you wish to clean.
retaining plate can lead to serious
damage to the vacuum cleaner and
possibly voiding the warranty, just
as with the use of filter bags without
the "Original Miele" logo.
Purchasing new FilterBags and filters
Original Miele FilterBags and filters can
be purchased from an authorized Miele
vacuum dealer or by visiting the Miele
13
en
Which FilterBags and filters are the
right ones?
Check the airflow indicator
^ Place the body of the vacuum
cleaner into the full upright position.
This vacuum cleaner uses Original
Miele FilterBags Type U and Original
Miele filters, the "Original Miele" Logo
will appear on the packaging or directly
on the FilterBag.
^ Use the On/Off button on the handle
to switch the vacuum cleaner on,
then select the highest suction
setting.
^ Tip the vacuum cleaner until you can
read the color marker in the indicator
window. The electrobrush will be
lifted up at the front.
If the color marker completely fills the
indicator window, the FilterBag needs
to be changed.
An "AirClean" exhaust filter and a dust
compartment filter are supplied with
every box of Miele filter bags.
How the airflow indicator works
If you would like to purchase additional
Miele filters separately, contact your
vacuum dealer or Miele, please quote
the model number of your Miele
vacuum cleaner to ensure correct parts
are ordered. These parts are also
available to order from the online Miele
store.
The airflow indicator is designed to
show when the bag is full of common
household dust. It also measures the
amount of air flow through the FilterBag.
Normal household dust is a mixture of
dust, hair, carpet fluff, threads, etc.
However, if fine dust, such as drill dust,
sand, plaster or flour is vacuumed, the
pores of the FilterBag may become
blocked. The marker will indicate that
the bag is "full" even though it does not
look "full". The FilterBag should still be
changed, as the suction power is
greatly reduced.
The exhaust filter supplied with the
vacuum cleaner can be exchanged
with another type of Original Miele filter
(see "Exchanging exhaust filters").
When to change the FilterBag (see
fig. 25)
If the bag is bulging with pet fur, hair,
carpet fluff, etc. the indicator may not
register "full". This is because the air
flow of the FilterBag may still be high
enough not to activate the marker to
show maximum. The FilterBag should
still be changed.
Change the FilterBag when the colored
marker in the airflow indicator fills the
display.
Miele FilterBags are disposable and
made to be used only once. Do not
attempt to reuse.
14
en
Changing the FilterBag (see fig. 26,
27 + 28)
Changing the dust compartment filter
(see fig. 29)
^ Place the body of the vacuum
cleaner into the full upright position.
^ Open the dust compartment lid.
^ Open the filter frame, use the clean
corner to remove the filter.
^ Lift the release button for the dust
compartment lid and open until it
clicks into place.
^ Insert a new filter.
^ Close the filter frame.
^ Pull the tab on the collar and swing
the FilterBag up and away from the
suction socket before taking it out of
the frame.
^ Close the dust compartment lid until
it clicks into place.
When to change the exhaust filter
The FilterBag has a flap that
automatically closes to prevent dust
from escaping when the bag is
removed.
Depending on the model, your vacuum
cleaner will use one of the following ex-
haust filters (see fig. 2):
^ Do not unfold the FilterBag when you a AirClean Filter
first remove it from the box. Insert the
new FilterBag as far as it will go into
the holder.
Whenever you start a new box of Miele
FilterBags, you should change this
exhaust filter. A new AirClean exhaust
filter is included in every box of Miele
FilterBags.
^ Unfold the FilterBags in the dust
compartment.
b Active AirClean Filter SF-AA 30 (black)
c HEPA AirClean Filter SF-HA 30 (white)
If the display of the exhaust filter
change indicator has turned fully red
(see fig. 7).
^ Close the dust compartment lid until
it clicks into place, taking care not to
catch the FilterBag in the lid. The
FilterBag is automatically aligned with
the vacuum hole.
The indicator light will come on after
approx. 50 hours of operation, which is
equivalent to one year of average use.
The vacuum cleaner can still be used
however, the filter performance and
suction power will be reduced.
,An empty-operation-barrier
blocks the dust compartment lid
from closing if no FilterBag is
inserted or if it is not inserted
correctly. Do not force it closed.
Be sure to have a replacement filter on
hand.
When to change the dust
compartment filter (pre-motor filter)
Whenever you start a new box of Miele
FilterBags, you should change the dust
compartment filter. A new filter is
included in every box.
15
en
Replacing the "AirClean" filter (see
fig. 30, 31 + 32)
After about 10-15 seconds, a small red
marker will appear in the left-hand side
of the display (see fig. 6).
Do not use more than one filter at a
time.
^ Close the exhaust filter compartment
lid.
^ Open the exhaust filter compartment
lid.
If you wish to use an Air Clean filter
see "Exchanging exhaust filters".
^ Remove the filter frame.
Exchanging exhaust filters
^ Open the filter frame and use one of
the two clean corners to remove the
used AirClean filter.
Depending on the model, your vacuum
cleaner will use one of the following
standard exhaust filters (see fig. 2):
^ Insert a new AirClean filter.
a AirClean
b Active AirClean 30 (black)
c HEPA AirClean (white)
If you wish to replace the AirClean
filter with an Active AirClean 30 filter
or HEPA AirClean 30 filter see
"Maintenance and care -
If you wish, you can use one of the
alternative filters instead of the
standard filter supplied with your
appliance. Each filter offers different
characteristics (see section "Optional
accessories").
Exchanging exhaust filters".
^ Close the filter frame and insert it
back into the compartment.
^ Close the exhaust filter compartment
lid.
Important
1. If you replace exhaust filter a with
exhaust filter b or c, you must be sure
to remove the filter frame before
inserting the new filter type. The
exhaust filter change indicator must
also be activated (see fig. 5).
Replacing the "Active AirClean 30"
filter and the "HEPA AirClean 30"
filter (see fig. 33)
Do not use more than one filter at a
time.
2. If you replace exhaust filter b or c
with exhaust filter a, be sure to place
the new filter in a filter frame *
(see fig. 31).
^ Open the exhaust filter compartment
lid.
^ Remove the exhaust filter.
^ Insert the new exhaust filter and
press the exhaust filter change
indicator ~ (see fig. 5).
Do not use more than one filter at a
time.
* Filter frame - see "Optional accessories"
16
en
Service indicator with reset button [ Blockages (see fig. 36 + 37)
(see fig. 34)
If there are large particles or other
blockages at the base of the suction
hose, you can open it up to clear the
passage.
The indicator light will come on after
approx. 50 hours of operation, which is
equivalent to one year of average use.
Check if the motor protection filter and
the exhaust filters need to be replaced
as well. You will need to reset the
indicator after replacing any of these
components.
^ Click the vacuum cleaner into the full
upright position.
^ Press the release button on the
telescopic wand and remove the
handle from the suction hose
To do this, the vacuum cleaner must be
turned on.
^ Guide the swivel elbow at the end of
the suction hose over the catch
hooks, to increase the stability the
vacuum cleaner (see fig. 21).
^ Press the reset button [.
The service indicator will go out and be
reset to its original position.
AUndo the suction hose in the
direction of the arrow.
The reset feature only works
properly if the indicator light has
already come on, but not if the reset
button is pressed in between filter
changes.
BPull the suction hose connector off
the swivel elbow.
^ Remove all blockages
^ Put the connector back on and click
it shut.
Removing hair and threads from the
Powerbrush (see fig. 35)
If you still have not been able to remove
the obstruction(s), there is another
method you can try.
^ Turn off the vacuum and unplug it
from the outlet.
^ Release the body of the vacuum
cleaner and lower it to the floor
(see fig. 12).
Open the service flap on the bottom
rear of the vacuum cleaner.
AUse a coin to undo the two screws
until they stop.
^ Turn the vacuum cleaner over.
^ Use scissors to cut any threads or
hair that have wound around the
roller brush. Guide the scissors along
the guide track on the beater bar.
BPry the service flap free.
^ Remove all blockages.
Put the service flap back on and screw
into place.
The trimmings will be drawn into the
vacuum cleaner by the suction once
the vacuum cleaner is turned on.
17
en
Cleaning and care
Frequently asked questions
Cleaning
What if the vacuum cleaner
automatically shuts off?
,Turn the vacuum cleaner off and
unplug it from the outlet before
performing any maintenance work.
ComfortLine Models:
The "On" indicator lights red.
PremiumLine Models:
The "§" Thermo indicator lights red.
Vacuum cleaner and accessories
A temperature sensor will turn off the
vacuum cleaner if it becomes too warm.
This problem can occur if, for example,
an object is blocking the suction tube
or the FilterBags pores have become
clogged with fine dust. The cause
could also be a heavily soiled exhaust
or dust compartment filter.
The vacuum cleaner and all plastic
accessories can be cleaned using a
damp cloth and a cleaner suitable for
plastics.
,Do not use abrasive, oil-based,
glass or all purpose cleaners!
If this happens, turn off the vacuum
cleaner and the Powerbrush and
unplug the power plug from the
electrical outlet.
Dust compartment
If the dust compartment needs to be
cleaned, use another vacuum cleaner,
a dry cloth or dusting brush.
Once the cause has been addressed,
allow the vacuum cleaner to cool for
approx. 20 - 30 minutes before
resuming vacuuming.
,Do not submerge the vacuum
cleaner in water. If moisture gets
into the appliance, there is the risk
of electric shock.
What if the Powerbrush automatically
shuts off and the indicator displays a
red light?
The blockage protection feature has
been activated. This can occur if
enough threads wrap around the beater
bar or if a large or long object has been
vacuumed up.
If this happens, turn off the Powerbrush,
then switch off and unplug the vacuum
cleaner.
Once the blockage has been removed,
the vacuum cleaner is ready for use.
18
en
What if the Powerbrush automatically You can order these and many other
shuts off and the indicator displays a products via the Miele website.
yellow light?
Attach the desired accessory onto the
handle of the vacuum hose or onto the
telescopic wand or onto the EasyLock
wand (depending on model).
The temperature limiter in the
Powerbrush has been triggered
because of overheating, for example
due to a blockage in the vacuum
hose/wand.
Turbo/Floor brushes
If this happens, turn off the Powerbrush,
then switch off and unplug the vacuum
cleaner.
Hand Turbobrush Turbo Mini / Turbo
Mini Compact (STB 101 / STB 20)
Once the vacuum hose/wand and all
filters have been inspected, plug in the
vacuum cleaner and turn it on and
vacuum for approx. 10 minutes (leave
the Powerbrush on). This helps cool off
the Powerbrush so that it can be
switched on again.
For vacuuming upholstery, mattresses
or car seats.
Floor brush Hardfloor (SBB 235-3)
To vacuum sturdy hard floors, e.g. tiles.
Floor brush Parquet
With natural bristles for use on
hardwood-type floors that may be
susceptible to scratching, such as
parquet and laminates.
After sales service
In the event of a fault which you cannot
fix yourself please contact the Miele
Service Department at the phone
number listed on the back of this
booklet.
Floor brush - Parquet Twister with
swiveling head (SBB 300-3)
^ Please quote the model type of your
appliance.
For vacuuming all hard flooring and
tight spaces.
This can be found on the data plate on
the bottom of the Powerbrush
Floor brush - Parquet Twister XL with
swiveling head (SBB 400-3)
Optional accessories
For vacuuming large areas of hard
flooring and tight spaces.
Some models come with the one or
more of the following accessories.
Other accessories
Accessory case MicroSet (SMC 20)
Always follow the flooring
manufacturer's cleaning and care
instructions.
Accessories for use on small or
hard-to-reach items (stereos,
keyboards, models, etc).
19
en
Universal brush (SUB 20)
For dusting books, shelves etc.
Radiator brush (SHB 30)
HEPA AirClean 30 filter (SF-HA 30)
Vacuum cleaners equipped with this
exhaust filter are particularly suitable for
allergy sufferers and those concerned
with a high level of hygiene because of
its ability to trap respirable particles
and allergens.
(must be used in connection with the
crevice nozzle)
For cleaning radiators, narrow shelves
and crevices.
Caring for the environment
Mattress tool (SMD 10)
Disposal of the packing material
For use on mattresses, upholstery, and
deeper crevices.
The cardboard box and packaging
protect the vacuum cleaner during
shipping. These materials are
recyclable. Please recycle.
Upholstery nozzle, 7 1/2" (190 mm)
(SPD 10)
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
Extra wide upholstery nozzle for
cleaning upholstered furniture,
mattresses and pillows.
Filter
Disposal of an old machine
Filter frame
Old vacuum cleaners may contain
materials that can be recycled. Please
contact your local recycling authority
about the possibility of recycling these
materials.
The filter frame is needed if you would
like to exchange the ActiveAirClean 30
or HEPA AirClean 30 filters with the Air
Clean filter (see "Exchanging exhaust
filters").
ActiveAirClean 30 exhaust filter
(SF-AA 30)
This special active charcoal filter
absorbs odors collected in the
FilterBag. The filter effectively controls
most odors. The ActiveAirClean 30 filter
can be exchanged with the existing
exhaust filter.
20
LIMITED WARRANTY - VACUUM CLEANERS
USA
What This Warranty Covers And For What Period The Coverage Extends
Miele, Inc. (hereinafter "Miele") warrants to the original purchaser of this product, living in the United States of
America, who purchased their vacuum from a Miele authorized distributor or dealer:
a. That this product, including all of its Miele authorized parts is free of defects in material and workmanship.
b. That this product, if found to be defective within the stated warranty period, will be repaired free of charge to the
consumer (both parts and labor) by an authorized Miele service agent.
c. The warranty period for vacuum cleaners (excepting the S8990 and RX1 Scout), and all accessories, excluding
vacuum cleaner motors, power head motors, and vacuum cleaner casings (body), is one (1) year from the date of
purchase. For the S8990, the warranty period is five (5) years from the date of purchase.
d. For vacuum cleaner casings (body), the warranty period will be as follows:
-
The structural integrity of the vacuum cleaner casing (body), will be covered for seven (7) years from the date of
purchase against defects in material and workmanship on the S2xxx, S4xxx, S5xxxx, S6xxx, S7xxx, S8xxx, S160
and S190 product series.
-
The structural integrity of the vacuum cleaner casing (body) of the S8990 will be covered for ten (10) years from
the date of purchase against defects in material and workmanship.
e. For vacuum cleaner and power head motors, the warranty period will be as follows:
-
Vacuum cleaner and power head motors will be covered for seven (7) years from the date of purchase on the
S2xxx, S4xxx, S5xxx, S6xxx, S7xxx, S8xxx, S160 and S190 product series.
-
Vacuum cleaner and power head motors for the S8990 will be covered for ten (10) years from the date of purchase.
f. For the RX1 Scout, the warranty period is two (2) years from the date of purchase for the complete vacuum,
except for the battery, which will be warranted for one (1) year from the date of purchase.
Vacuum cleaners other than the RX1 Scout used for commercial purposes, except for their motors, will be warranted
for a period of six (6) months from the date of purchase. The motors of commercially used upright vacuums will be
warranted for one (1) year and the motors of all other commercially used vacuum cleaners, except for the RX 1 Scout
will be warranted for two (2) years. There is no warranty for the RX1 Scout used for commercial purposes. Thereafter
this Limited Warranty shall be null and void.
This warranty only applies while the product remains within the United States, and shall be null and void in any other
US territories, possessions, or foreign countries.
What is not covered by this Warranty
This warranty does not cover damage or defects caused by or resulting from repairs, service or alterations to the
product or any of its parts or accessories which have been performed by service centers or repairmen not authorized
by Miele, or damage or defects caused by negligence, accident, abuse, misuse, improper or abnormal usage or
maintenance of the product, its parts or accessories. Ordinary wear and tear or cosmetic damage (scuffs, scratches,
gouges, dents, etc.) shall not be considered a defect in materials or workmanship.
Exclusion of Other Warranties
Except for the limited warranty provided herein, Miele disclaims any and all other express warranties with respect to
the product. Any warranty of merchantability or fitness for a particular purpose is limited in its duration to the term of
the limited warranty provided herein. Some states do not allow limitations on how long an implied warranty lasts, so
the above limitation may not apply to you.
Limitation of Liability for Special, Incidental or Consequential Damages
Miele will assume no liability, or other obligation with respect to any personal injury or property damage resulting from
the use of a vacuum cleaner, or its accessories, replacement parts, etc., which has not been purchased from, or serviced
by an Authorized Miele Dealer. Any purchaser who obtains a vacuum cleaner, accessories, replacement parts, etc., from
someone other than an Authorized Miele dealer proceeds at their own risk.
Miele specifically disclaims any and all liability, whether directly or by way of indemnity, for special incidental, consequential
or other damages, whether based on breach of contract, tort, strict or product liability, or any other legal theory.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may
not apply to you.
Special State Laws
This Limited Warranty gives you specific legal rights; you may have other rights, which vary, from state to state.
Service
For service under this Limited Warranty, or for information you may need about the product, please contact Miele at
Authorized Miele Dealers
Effective Date: June 1, 2014
©2014 Miele, Inc.
21
22
25
Please have the model and serial number
of your appliance available before
contacting Technical Service.
U.S.A.
Canada
Miele, Inc.
Importer
Miele Limited
National Headquarters
9 Independence Way
Princeton, NJ 08540
Headquarters and Miele Centre
161 Four Valley Drive
Vaughan, ON L4K 4V8
800-843-7231
609-419-9898
609-419-4298
Phone:
Fax:
Customer Care Centre
Phone:
800-565-6435
905-532-2272
Technical Service & Support
Nationwide
800-999-1360
888-586-8056
Phone:
Fax:
Germany
Manufacturer
Miele & Cie. KG
Carl-Miele-Straße 29
33332 Gütersloh
Alteration rights reserved
(Dynamic U1) - 4014
M.-Nr. 10 098 300 / 00
INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST
CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
|