MIELE DIAMANTE G 2150 User Manual

Operating instructions  
Inspira Series  
G 2140  
Diamante  
G 2150  
To prevent accidents  
and machine damage  
read these instructions  
before  
UV  
installation or use.  
M.-Nr. 06 696 010  
Contents  
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Technical faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Problems water intake/drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
General problems with the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Sounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Poor cleaning results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
User Maintenance Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Triple filter system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Cleaning the spray arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Cleaning the water inlet filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Cleaning the drain pump and non-return valve. . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Help to protect the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
Connection to the water supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
3
IMPORTANT SAFETY INSTRUCTIONS  
WARNING –  
When using your dishwasher, follow  
basic precautions, including the  
following:  
Electrical Safety  
Before installation, make sure that  
the voltage and frequency listed on  
the data plate correspond with the  
household electrical supply. This data  
must correspond to prevent injury and  
machine damage. Consult a qualified  
electrician if in doubt.  
Read all instructions before  
installation or use of the dishwasher  
to prevent injury and machine  
damage.  
Before installation or service,  
disconnect the power supply to the  
work area by unplugging the unit,  
"tripping" the circuit breaker or  
removing the fuse.  
The manufacturer cannot be held  
responsible for damage or injury  
caused by improper use of this  
appliance.  
Do not use an extension cord to  
connect this appliance to  
electricity. Extension cords do not  
guarantee the required safety of the  
appliance (e.g. danger of overheating).  
Use the dishwasher only for its  
intended purpose. This appliance is  
intended for residential use only.  
Be certain your appliance is  
properly installed and grounded by  
a qualified technician. To guarantee the  
electrical safety of this appliance  
continuity must exist between the  
appliance and an effective grounding  
system. It is imperative that this basic  
safety requirement be met. If there is  
any doubt, have the electrical system of  
the house checked by a qualified  
electrician. The manufacturer cannot be  
held responsible for damages caused  
by the lack, or inadequacy, of an  
effective grounding system.  
Keep these operating instructions in  
a safe place and pass them on to  
any future user.  
4
IMPORTANT SAFETY INSTRUCTIONS  
Installation  
, WARNING - Fire hazard  
Do not cover or crush the plug of  
The dishwasher must be installed  
and connected in compliance with  
the installation instructions.  
the appliance. Ensure that the cabinet  
opening for the dishwasher provides  
ample space for the plug. Installing the  
dishwasher in a tight space may crimp  
the power cord or put pressure on the  
plug which could cause overheating.  
Installation and repair work should  
be performed by a Miele  
authorized service technician. Work by  
unqualified persons could be  
This dishwasher should only be  
installed under a continuous  
dangerous and may void the warranty.  
Do not install or use a damaged  
counter top secured to adjacent  
dishwasher. A damaged appliance cabinetry.  
is dangerous. Unplug the machine and  
call your Miele dealer or the Miele  
Technical Service Department.  
Do not install this dishwasher  
beneath a cooking surface, oven or  
any appliance that radiates heat.  
High temperatures from these units may  
damage the dishwasher.  
Ensure that any plastic wrappings,  
bags, etc. are disposed of safely  
and kept out of the reach of children.  
Danger of suffocation!  
When installing the dishwasher  
under a counter top and removing  
This equipment is not designed for the toekick, a build-under toekick must  
maritime use or for use in mobile  
installations such as recreational  
be installed. Use the respective  
installation kit. Danger of injuries.  
vehicles or aircraft. However, under  
certain conditions it may be possible for  
an installation in these applications.  
Please contact the nearest Miele dealer  
or the Miele Technical Service  
Do not cut the intake hose or  
submerge it in liquid. This hose  
contains electrical components that  
could cause injury or property damage  
if cut or submerged.  
Department with specific requirements.  
Only connect the dishwasher to the  
mains when all installation and  
plumbing work is complete.  
It is recommended that the  
dishwasher only be connected to  
the mains with the plug (no  
hard-wiring). The outlet must be  
accessible at all times after installation  
to disconnect the dishwasher.  
5
IMPORTANT SAFETY INSTRUCTIONS  
Use  
Only use detergents and rinse aids  
recommended for residential  
dishwashers. Keep all detergents and  
rinse aids out of the reach of children.  
To reduce the risk of injury, do not  
allow children to play in, on or near  
the dishwasher.  
Do not inhale or swallow  
detergents. Dishwasher detergents  
contain irritant and corrosive  
Only use the dishwasher if all  
panels are properly in place.  
Do not tamper  
with the controls.  
ingredients. They can cause burning in  
the mouth and throat if swallowed, or  
inhibit breathing. Consult a doctor  
immediately if detergent has been  
swallowed or inhaled.  
Do not damage, sit or stand on the  
door or baskets of the dishwasher.  
Close the door when not in use.  
Do not drink water from the  
dishwasher! Harmful residues  
could be present.  
Under certain conditions, hydrogen  
gas may be produced in a hot  
water system that has not been used  
for two weeks or more. HYDROGEN  
GAS IS EXPLOSIVE. If the hot water  
system has not been used for such a  
period, turn on all hot water faucets and  
let water flow from each for several  
minutes before using the dishwasher.  
This will release any accumulated  
hydrogen gas. Do not smoke or use an  
open flame during this time.  
Do not fill the rinse aid reservoir  
with detergent. It will damage the  
rinse aid compartment.  
If the power cord is damaged it  
must only be replaced by a Miele  
Service technician with a genuine Miele  
power cord.  
Disposal of an appliance  
Be sure that all items placed in the  
dishwasher are "dishwasher safe".  
For items not labeled, check the  
manufacturer’s recommendations.  
If the appliance is removed from its  
installation site and will not be  
used, remove the doorlock to the wash  
cabinet to prevent children from locking  
themselves in the machine.  
When loading tableware, place  
sharp items away from the door to  
prevent damage to the seal. Load  
sharp items pointing downwards to  
prevent injuries.  
SAVE THESE  
INSTRUCTIONS  
6
Guide to the dishwasher  
a Upper spray arm (not visible)  
b Cutlery tray (depending on model)  
c Upper basket  
g Filter combination  
h Data plate  
i Child Safety Lock in the door handle  
(not visible)  
d Middle spray arm  
j Rinse aid reservoir  
e Air inlet for drying  
(depending on model)  
k Dual compartment detergent  
dispenser  
f Lower spray arm  
7
Guide to the dishwasher  
Control panel  
a Program selection  
d Check / Refill indicators  
e Program cycle indicators  
f s button (On/Off button)  
b Program button  
c Start/Stop button with indicator  
8
Caring for the environment  
Energy saving washing  
This dishwasher is exceptionally  
economical in the use of water and  
electricity. For best results follow these  
tips:  
^ For lowest energy consumption and  
the gentlest washing of china and  
crystal, connect the dishwasher to a  
cold water source.  
^ For fastest possible wash times, yet  
higher energy consumption, connect  
the dishwasher to a hot water source.  
^ Make full use of the baskets without  
overloading for the most economical  
washing.  
^ Use the correct amount of detergent  
and rinse aid.  
^ When using powder or gel detergent,  
reduce the amount to 2/3 of the  
normal amount when washing a small  
load.  
^ Choose a program that best suits the  
degree of soiling and the type of  
dishes being washed.  
^ For small loads select "Short".  
9
Before using for the first time  
To open the door  
Child Safety Lock  
^ Press the release catch inside the  
door grip.  
The Child Safety Lock is designed to  
prevent children from opening the  
dishwasher.  
If the door is opened during operation,  
the dishwasher will stop running. Once  
the door is closed the program will  
restart.  
^ To lock the door, push the slider  
below the door grip to the right.  
^ To unlock the door, push the slider to  
the left.  
To close the door  
^ Push the baskets in.  
^ Lift the door and push until it clicks  
into place.  
10  
Before using for the first time  
Rinse aid  
Rinse aid is needed to prevent spotting  
on dishes and glassware.  
The rinse aid is filled in the reservoir  
and the set amount will be  
automatically dosed.  
,Filling the rinse aid reservoir with  
detergent will damage the reservoir.  
Only pour rinse aid formulated for  
residential dishwashers into the  
reservoir.  
^ Pour liquid rinse aid into the reservoir  
until it its visible on the surface of the  
screen.  
When using "2 in 1" detergents rinse  
aid is not needed.  
The rinse aid reservoir holds approx.  
3.7 oz (110 ml).  
Adding rinse aid  
^ Press on the flap until you hear it  
click shut. Failure to close it all the  
way allows water to enter the  
reservoir during the wash program.  
^ Clean any spilled rinse aid. The flap  
will remain closed during normal  
operation.  
^ Press the button in the direction of  
the arrow until the flap springs open.  
11  
Before using for the first time  
Rinse aid indicator  
Adjusting the dosage  
When the Rinse aid indicator first  
comes on, there will be enough rinse  
aid left for 2 - 3 washes.  
The dosage selector is preset to 3. This  
dispenses approximately 3 ml of rinse  
aid per program. It can be adjusted  
from 1 to 6.  
– Use a higher setting if spots appear  
on dry glassware.  
– Use a lower setting if streaking  
appears on dishes or glasses.  
^ Turn the dishwasher off "s".  
^ Press the "Start/Stop" button and at  
the same time turn the dishwasher on  
s. Hold the "Start/Stop" button until  
the "Start/Stop" indicator comes on.  
If it doesn’t come on, start over.  
^ The rinse aid indicator on the control  
panel will light when the rinse aid  
reservoir needs refilling.  
12  
Before using for the first time  
^ Press the program button three times.  
The lowest program indicator flashes  
three times in intervals.  
The "Rinse" indicator flashes three times  
in intervals.  
A rinse aid amount of 3 ml is set by  
default.  
The amount set can be recognized by  
the flashing rhythm of the "Rinse"  
indicator (see table).  
Rinse aid  
amount in ml  
Flashing  
rhythm  
0
1
2
3
4
5
6
Once  
Twice  
Three times  
Four times  
Five times  
Six times  
^ Select the desired setting with the  
"Start/Stop" button. Every touch of the  
button increases the level.  
The programmed dosage is saved.  
^ Turn the dishwasher off "s".  
13  
Loading the dishwasher  
^ The spray arms must not be blocked  
by items that are too tall or hang  
through the baskets. Check  
clearance by manually rotating the  
spray arms.  
,Do not wash items soiled with  
ash, sand, wax, grease or paint in  
the dishwasher.  
Ash and sand do not dissolve and  
will be distributed throughout the  
inside of the dishwasher.  
Wax, grease and paint will cause  
permanent discoloration and  
damage to the dishwasher.  
^ Place very small items in the cutlery  
tray or basket so they do not fall to  
the bottom of the wash cabinet.  
^ Food residue and spilled liquids  
should be cleaned from the sides of  
the dishwasher door. These are  
outside of the wash cabinet and are  
not cleaned by water from the spray  
arms.  
^ Scrape food from dishes before  
placing them in the dishwasher,  
rinsing is not necessary.  
^ Some foods contain natural dyes,  
e.g. carrots or tomatoes. Plastic items  
may discolor permanently if they  
come in contact with food dyes.  
^ All items can be placed anywhere in  
the baskets.  
^ Load dishes so that water can reach  
all surfaces. Do not place dishes or  
cutlery inside other pieces.  
^ Make sure that all items are securely  
positioned.  
^ Hollow items such as cups and  
glasses should be placed upside  
down in the baskets.  
^ To ensure good water coverage,  
tall, narrow and hollow items,  
i.e. vases or champagne glasses,  
should be placed in the center of the  
basket rather than in the corners.  
^ Concave based items such as mugs  
or bowls, should be placed at an  
angle so that water does not pool.  
14  
Loading the dishwasher  
Items not recommended for  
dishwashing  
Glassware:  
– There are no standard guidelines for  
washing glassware, when in doubt  
wash by hand.  
– Cutlery with wooden handles  
– Wooden cutting boards  
– When purchasing new dishes,  
glasses and cutlery, make sure they  
are dishwasher safe. Only wash  
items marked "dishwasher safe" in  
the dishwasher.  
– Glued items such as old knives with  
handles glued together around the  
shank of the blade  
– Handmade craft items, antique,  
metal trimmed or decorative  
glassware  
– If fine glassware is washed in the  
dishwasher select the "China &  
Crystal" program*. This will reduce  
the risk of clouding.  
– Plastic items that are not heat  
resistant  
– Copper, brass, tin or aluminum  
Silver and aluminum:  
– Dishes with color painted over the  
glaze. These dishes may fade over  
time  
– Silver or aluminum items may tarnish.  
– Silverware previously cleaned with a  
silver polish may be damp or spotted  
at the end of a program where water  
has adhered to the polish. This can  
be rubbed off with a soft, dry cloth.  
Silver that has been cleaned in an  
immersion dip is usually dry at the  
end of a program, but may tarnish.  
– Fine glassware and crystal items  
should only be washed using the  
"China & Crystal" program*.  
Otherwise clouding or etching may  
occur after frequent washing.  
– Cast iron pots and pans  
– If left to dry, foods containing sulfur  
can discolor silver. These include  
egg yolk, onions, mayonnaise,  
mustard, fish and marinades.  
* depending on model  
– Silverware may tarnish or pit if  
washed next to stainless steel.  
Leave space between these metals.  
– Clean aluminum items, e.g. grease  
filters, with domestic dishwasher  
detergent only.  
15  
Loading the dishwasher  
Cutlery tray  
(depending on model)  
Spoons with thick handles may have to  
be placed as knives and forks with their  
heads in the holders  
^ Arrange the cutlery as shown in the  
cutlery tray.  
For easier unloading cutlery should be  
grouped in zones, one for knives, one  
for forks, one for spoons, etc.  
Place knives with the cutting edge  
down and forks with the prongs  
between the holders. Spoons should be  
placed in the opposite direction with  
the handles between the holders.  
The upper spray arm must not be  
blocked by tall cutlery items.  
The cutlery tray insert is removable.  
16  
Loading the dishwasher  
Cutlery basket  
Spoon inserts for the cutlery basket  
(depending on model)  
The supplied insert is designed to wash  
heavily soiled spoons. The individual  
slots allow the water to better reach the  
surface of each spoon.  
^ For best cleaning results, cutlery  
should be placed in the basket with  
the handles down. Knives and forks  
should be loaded with the pointed  
end down to prevent injuries.  
^ Attach the insert when needed to the  
cutlery basket.  
^ Place small spoons in the individual  
slots to either side of the cutlery  
basket.  
^ Insert the cutlery with the handles  
down into the insert. Arrange the  
cutlery evenly.  
17  
Loading the dishwasher  
Upper basket  
Cup racks  
^ Raise the rack to make room for tall  
glasses. Lower it to double stack  
smaller pieces.  
,Always use the dishwasher with  
the upper and lower basket inserted.  
Coffee bar  
(depending on model)  
Glasses can be leaned against the  
coffee bar for a secure stand.  
^ Load the upper basket with small,  
lightweight, or delicate items such as  
cups, saucers, glasses, dessert  
bowls and flat pans.  
^ Long items such as soup ladles,  
mixing spoons and long knives  
should be placed lying down across  
the front of the upper basket.  
^ The bar can also be used to separate  
two rows of glasses.  
To stack wide items, flip the bar to the  
right.  
18  
Loading the dishwasher  
Adjusting the upper basket  
Depending on the setting of the upper  
basket, a variety of plate dimensions  
can be accommodated.  
The upper basket can be raised or  
lowered to accommodate tall items.  
For example: If the upper basket is in  
its highest position a plate with a  
diameter of 12 3/16" (31 cm) can be fit in  
the lower basket.  
The basket can also be angled to fit tall  
items in both, the upper and lower  
baskets. The angles should not be set  
to opposite extremes. This will block the  
middle spray arm. Take care when  
sliding the basket in and out in this  
position.  
^ Slide out the upper basket.  
^ Pull up the levers at the sides of the  
upper basket and adjust the basket  
height.  
^ Release the levers and the basket will  
lock in place.  
19  
Loading the dishwasher  
Lower basket  
Foldable spikes  
^ For larger and heavier items such as  
plates, serving platters, saucepans,  
bowls, etc.  
Two rows of spikes can be folded  
down, to create more room for larger  
dishware, e.g. pots, pans and bowls.  
Dishwashers with cutlery tray  
^ Lift the spike rows and fold them  
down on one another.  
Dishwashers with cutlery basket  
20  
Loading the dishwasher  
Vase/Bottle holder  
(depending on model)  
The vase/bottle holder, e.g. for vases  
and baby bottles, can be inserted into  
the lower basket as shown in the  
illustration.  
If placed anywhere else, water will not  
reach all surfaces. The bottle will not be  
properly cleaned.  
21  
Basket accessories  
Additional inserts for the upper and lower baskets may be purchased from your  
Miele dealer or Miele. Depending on the model some accessories come standard  
with the machine.  
Glassware insert GGO  
To wash long stemmed glassware  
attaches to the upper basket  
Vase / Bottle holder GF  
To wash baby bottles or vases  
Cappuccinatore insert GCEO  
To wash the parts of the  
Cappuccinatore  
22  
Use  
Detergent  
You can use powder, gel or tab  
detergents. Follow the dosage  
information on the detergent  
packaging.  
,Dishwasher detergents contain  
irritant and corrosive ingredients.  
Avoid inhaling or swallowing  
dishwasher detergent.  
Keep children away from detergent.  
Fill the detergent dispenser only  
when you are ready to start the  
dishwasher.  
Detergent tabs are not recommended  
for use with the program "Short". The  
tabs may not dissolve completely.  
,Only use detergents formulated  
for domestic dishwashers.  
Use only the recommended amount  
of detergent. Continued use of too  
much detergent may cause machine  
damage.  
23  
Use  
Adding detergent  
^ Add detergent to compartment II and  
close the flap.  
^ To open, press the latch on the  
detergent dispenser. The flap will  
spring open.  
^ If a Pre-rinse is desired, and available  
for your chosen program, add  
1 teaspoon (5 ml) of detergent to  
compartment I.  
The flap is always open at the end of a  
program.  
The horizontal marks in compartment II  
indicate the levels of approximately 1 ¼  
and 2 tablespoons (20 and 30 ml)  
respectively. Compartment I holds a  
maximum of 2 teaspoons (10 ml).  
24  
Use  
Turning on  
Starting a program  
^ Make sure the spray arms can rotate  
freely.  
^ Select the desired program with the  
program selector button.  
^ Close the door.  
The indicator of the selected program  
lights.  
^ Open the water supply, if it is closed.  
^ Turn the dishwasher on s.  
^ Press the "Start/Stop" button.  
The program starts. The indicators  
"Start/Stop", "Rinse" and the last  
selected program light.  
The "Start/Stop" indicator flashes and  
the indicator of the last set program  
lights.  
Cancel a program only in the first  
5 minutes. Otherwise important  
program steps could be interrupted.  
Selecting a program  
Choose your program according to the  
type of load and soiling.  
The "Program guide" describes the  
programs and use.  
Program sequence display  
After a program has been started the  
current stage of the program is  
indicated by the program cycle  
indicator.  
25  
Program guide  
Program  
When to use  
Program sequence  
Pre-  
rinse  
Main  
wash  
Interim  
rinse  
Final  
rinse  
Drying  
1
2
1
2
For normally soiled pots and  
pans with dried on food, also for  
heavily soiled dishware, use 120%  
of normal detergent dose  
Pots &  
Pans  
x
x
x
x
x
Run-time 125 min  
For normally soiled dishware  
Run-time 129 min  
Normal  
x
x
x
x
x
x
x
x
x
x
For normally soiled dishware,  
energy saving program with a long  
soaking time and a low  
temperature  
Economy  
Run-time 95 min  
Extended wash time,  
SaniWash  
Short  
x
x
x
x
x
x
x
for sanitizing normally soiled  
dishware with dried on food  
Run-time 115 min  
"Quick program" for lightly soiled  
dishware, e.g. party dishware  
includes sensor controlled  
Glasscare, not suitable for  
detergent tabs  
x
Run-time 30 min  
To rinse dishes when a complete  
program is not needed  
detergent is not recommended  
Run-time 13 min  
Rinse &  
Hold  
x
Usage:  
Electric: 0.01 - 1.23 kWh  
Water: 1.3 - 6.3 gal (5 - 24 l)  
26  
Use  
At the end of a program  
Interrupting a program  
When the program has finished the  
"End" indicator lights.  
A program is interrupted as soon as the  
door is opened. If the door is closed,  
the program will continue from where it  
was interrupted.  
Dishes tends to chip if removed still hot  
from the dishwasher.  
,Open the door with care. The  
water in the dishwasher is hot.  
Danger of scalding. Before closing  
the door again, leave it ajar for  
approx. 20 secs. This will enable the  
temperature in the wash cabinet to  
settle. Close the door firmly until it  
clicks into place.  
^ Let the dishware cool by opening the  
door slightly.  
The dishes will cool much faster.  
^ Open the dishwasher and unload the  
dishes.  
^ Turn the dishwasher off s.  
The dishwasher continues to use  
electricity until turned off with the  
s button.  
Changing a program  
^ If the dishwasher is not used for a  
longer period of time,  
e.g. vacationing, turn off the water  
supply.  
If the detergent flap is already open  
do not change the program.  
If a program has already started and  
you wish to change it:  
^ Press the "Start/Stop" button for at  
least one second.  
The program is cancelled. The  
"Start/Stop" indicator lights.  
^ Select and start the desired program.  
27  
Additional functions  
Factory default  
The "Rinse" indicator shows if a setting  
was changed.  
All settings can be reset to the factory  
default.  
– The "Rinse" indicator flashes:  
All settings are the factory default.  
^ Turn the dishwasher off s.  
– The "Rinse" indicator is off:  
^ Press the "Start/Stop" button and at  
the same time turn the dishwasher on  
s. Hold the "Start/Stop" button until  
the "Start/Stop" indicator comes on.  
At least one setting was changed.  
^ To reset the dishwasher to the default  
settings, press the "Start/Stop" button.  
If it does not come on, start over.  
^ Turn the dishwasher off s.  
^ Press the program button 12 times.  
The bottom program indicator flashes  
once long and twice short in intervals.  
28  
Frequently asked questions  
With the aid of the following guide, minor problems can be fixed without a service  
call.  
,Repairs should only be carried out by a qualified and trained person in  
accordance with local and national safety regulations. Unauthorized repairs  
could cause personal injury or machine damage.  
Technical faults  
Issue  
Possible fault  
Solution  
The Start/Stop indicator The machine is not  
Insert the plug.  
does not flash after the plugged in.  
dishwasher is turned on  
with s.  
The fuse has tripped.  
Reset the circuit breaker.  
Make sure it is a 15 A  
breaker.  
The dishwasher stops  
during a program.  
The fuse has tripped.  
Reset the circuit breaker.  
Make sure it is a 15 A  
breaker.  
The program cycle  
indicators "Rinse",  
"Drying" and "End"  
flash at the same time.  
There may be a technical Turn the dishwasher off  
fault.  
s.  
After a few seconds:  
Turn the dishwasher  
on.  
Select the desired  
program with the  
program selector  
button.  
Press the "Start/Stop"  
button.  
If the problem persists,  
call Technical Service.  
The drain pump is  
The waterproof system  
Turn off the water  
running when the door has activated.  
supply.  
is open.  
Call Miele Technical  
Service.  
29  
Frequently asked questions  
Problems water intake/drain  
Issue  
Possible fault  
Solution  
The "Intake/Drain"  
indicator flashes and closed.  
The water supply is  
Open the water supply all the  
way.  
lights alternately.  
The dishwasher stops  
running.  
The "Intake/Drain"  
Before fixing the fault:  
Turn the dishwasher off s.  
Fault in the water  
intake.  
Open the water supply all the  
indicator flashes.  
way.  
Clean the water intake filter,  
see "User Maintenance  
Instructions".  
The water pressure at the  
water connection is lower  
than 4.35 psi. Consult a  
plumber.  
Fault in the water  
drain.  
There may be water in  
the wash cabinet.  
Clean the triple filter.  
Clean the drain pump and  
the non-return valve.  
See "User Maintenance  
Instructions" for more  
information on the above.  
Remove any kinks in the  
drain hose.  
30  
Frequently asked questions  
General problems with the dishwasher  
Issue  
Possible fault  
Solution  
Detergent is left in the The dispenser was damp Dry the dispenser before  
dispenser at the end of when detergent was  
adding detergent.  
a program.  
added.  
The detergent lid  
cannot be closed  
properly.  
Detergent residue is  
blocking the catch.  
Remove the residue.  
The door and the  
This is not a fault!  
The moisture will evaporate  
interior walls are still  
It is the normal operating after a short time.  
wet after a program has mode of the drying  
finished.  
system.  
Water remains in the  
wash cabinet at the end  
of a program.  
Before fixing the fault:  
Turn the dishwasher off  
s.  
The triple filter in the  
Clean the triple filter. See  
wash cabinet is clogged. "User Maintenance  
Instructions".  
The drain pump or the  
Clean the drain pump and  
non-return valve may be the non-return valve, see  
blocked.  
maintenance instructions.  
The drain hose is kinked. Remove any kinks from the  
drain hose.  
31  
Frequently asked questions  
Sounds  
Issue  
Possible fault  
Solution  
There is a knocking  
noise in the wash  
cabinet.  
The spray arm is hitting an Interrupt the program,  
item in the basket.  
rearrange items blocking  
the spray arms.  
There is a rattling noise Items are not secure in the Interrupt the program and  
in the wash cabinet.  
wash cabinet.  
rearrange loose pieces.  
There is a knocking  
noise in the water  
pipes.  
This may be caused by  
the installation or the  
diameter of the pipe.  
This has no effect on the  
dishwasher. If in doubt  
contact a plumber.  
32  
Frequently asked questions  
Poor cleaning results  
Issue  
Possible fault  
Solution  
The dishes are not The dishes were not loaded See "Loading the  
clean.  
correctly.  
dishwasher".  
The program was not  
powerful enough.  
Select a more intensive  
program, see "Program  
Guide".  
Not enough detergent was  
dispensed.  
Use more detergent, see  
"Adding detergent".  
The spray arms are blocked Turn the spray arm and  
by items.  
rearrange the dishes if  
necessary.  
The triple filter in the base of Clean the filter and insert it  
the wash cabinet is not clean correctly.  
or not correctly inserted. The Clean the spray arm jets.  
spray arm jets might be  
clogged.  
See "User Maintenance  
Instructions".  
The drain pump or the  
Clean the drain pump and  
non-return valve is blocked. the non-return valve, see  
Wash water will run back into maintenance instructions.  
the wash cabinet.  
Glasses and  
The rinse aid dosage is set Reduce the dosage, see  
cutlery show  
streaks. There is a  
bluish sheen on  
the surface of  
glasses and a film  
that can eb wiped  
off.  
too high.  
"Before using for the first  
time".  
33  
Frequently asked questions  
Issue  
Possible fault  
Solution  
Dishes are still  
wet, glasses and  
cutlery are  
The rinse aid setting may  
be too low, or the rinse aid reservoir or switch the rinse  
reservoir is empty.  
Increase the dosage, refill the  
aid product when refilling, see  
"Before using for the first time".  
spotted.  
Dishes were taken out too Leave dishes in longer, see  
soon. "Use".  
"2 in 1" products were used. Use powder detergent and  
These products have a low add rinse aid.  
drying effect.  
White residue is  
Not enough rinse aid was  
Increase the dosage, see  
visible on cutlery used.  
"Before using for the first time".  
and dishes.  
Unsuitable "2 in 1" or "3 in 1" Use a different detergent,  
clouding occurs  
on glassware and  
film can be wiped  
off.  
products were used.  
normal tabs or normal powder  
detergent.  
34  
Frequently asked questions  
Issue  
Possible fault  
Solution  
Glasses are  
discolored and the  
Detergent ingredients have Use a different detergent.  
been deposited on the  
film cannot be wiped glassware.  
off.  
Glasses are dull and Glasses are not  
There is no remedy. Only  
wash dishwasher safe  
discolored, film  
dishwasher safe.  
cannot be wiped off.  
glasses in the dishwasher.  
Tea or lipstick stains The wash temperature of  
have not been  
completely removed. too low.  
The detergent has a low  
Select the "Economy" or  
the selected program was "Sani Wash" program.  
Use a different detergent.  
bleaching effect.  
Plastics are  
discolored.  
Natural dyes e.g. from  
vegetables may be the  
cause. Not enough  
Use more detergent, see  
"Adding detergent".  
Discoloration is permanent.  
detergent was used to  
break down natural dyes.  
There are rust stains The affected items are not There is no remedy. Only  
on cutlery.  
corrosion resistant.  
wash dishwasher safe  
cutlery in the dishwasher.  
35  
After sales service  
Repairs  
MieleCare  
In the event of a fault which you cannot  
correct yourself please contact the  
Miele Service Department at the phone  
number on the back of this booklet.  
MieleCare, our Extended Service  
Contract program, gives you the  
assurance of knowing that your  
appliance investment is covered by  
5 years of worry free ownership.  
MieleCare is the only Extended Service  
Contract in the industry that guarantees  
repairs by a Miele Authorized Service  
Provider using genuine Miele parts.  
Only genuine Miele parts installed by  
factory trained professionals can  
guarantee the safety, reliability, and  
longevity of your Miele appliance.  
^ Please quote the model type and  
number of your appliance.  
These can be found on the data plate  
along the right edge of the door.  
PC Update  
The Program Correction (PC) allows a  
technician to update the dishwasher to  
make use of new technology.  
Please note that unless expressly  
approved in writing by Miele’s Service  
department, Extended Service  
Contracts offered by other providers for  
Miele products will not be recognized  
by Miele. Our goal is to prevent  
unauthorized (and untrained) service  
personnel from working on your Miele  
products, possibly doing further  
damage to them, you and/or your  
home.  
When, for example, technological  
developments offer advanced  
modifications to your existing program  
cycles a service technician will be able  
to input these into your machine  
controls via the indicator light marked  
PC. Miele will provide information when  
such possibilities become available.  
To learn more about MieleCare  
Extended Service Contracts, please  
contact your appliance dealer or visit  
us online at:  
36  
Transport  
To transport the dishwasher, e.g. when  
moving to a new home, note the  
following:  
– Empty the dishwasher.  
– Secure any loose parts, e.g. hoses,  
cables, cutlery baskets.  
– Transport the dishwasher in the  
upright position. If unavoidable it  
may be transported on its back. Do  
not transport it on its side or on the  
door. Residual water in the machine  
could leak and cause electrical  
damage.  
37  
38  
User Maintenance Instructions  
To prevent accidents  
and machine damage,  
read these instructions  
before installation or use.  
Cleaning and Care  
Exterior  
Check and clean your dishwasher  
regularly (approx. every 4-6  
months). This will help avoid  
problems and faults.  
^ Only use a conditioner suitable for  
your kitchen cabinetry.  
^ Clean wood only with a damp cloth  
and wipe dry.  
^ Stainless steel surfaces can be  
cleaned using a non-abrasive  
stainless steel cleaner or with  
dishwashing detergent and warm  
water.  
,Abrasive cleaning agents, glass  
cleaning agents, all-purpose  
cleaners, thinner or ammonium  
cleaners should not be used on the  
dishwasher. They will damage the  
surface.  
^ To help prevent resoiling, a  
conditioner for stainless steel can  
also be used. Apply sparingly with  
even pressure.  
Wash cabinet  
Generally, the wash cabinet is self  
cleaning if the correct amount of  
detergent is used.  
Control panel  
^ Plastic control panel should only be  
wiped with a damp cloth or suitable  
cleaning agent designed for use on  
plastic.  
The wash cabinet can be cleaned with  
a dishwasher cleaner such as "Dis  
Cleaner" available from your Miele  
dealer, Miele or online at  
^ For stainless steel panels see  
information above.  
Door and the door seal  
^ Wipe the door seals regularly with a  
damp cloth to remove food deposits.  
,The stainless steel surfaces and  
controls may become discolored or  
damaged if not cleaned regularly.  
The appliance front and controls are  
not scratch proof.  
^ Food residue and spilled liquids  
should be wiped from the sides of the  
dishwasher door. These are outside  
of the wash cabinet and are not  
cleaned by water from the spray  
arms.  
Remove spills immediately.  
40  
Cleaning and Care  
Triple filter system  
The triple filter system in the base of the  
wash cabinet prevents food from being  
redeposited on dishes. It also protects  
the circulation pump from damage  
caused by foreign objects (e.g. broken  
glass, bones).  
,The machine must not be used  
without all the filters in place!  
^ Check and clean the filter system  
every 4-6 months or whenever a  
foreign object is trapped.  
^ Turn the handle counterclockwise to  
release the triple filter system.  
The level of soiling and time it takes  
before the filters need cleaning will vary  
depending on your household.  
^ Lift the filter combination out of the  
machine. Remove any solid particles  
and rinse under running water. Scrub  
with a nylon brush if necessary.  
^ Turn off the dishwasher before  
cleaning.  
41  
Cleaning and Care  
To clean the inside of the filter, the flap  
must be opened.  
^ Return the filter so it lies flat in the  
base of the wash cabinet.  
^ Push the clips together a and open  
the flap b.  
^ Lock the filter by turning the handle  
clockwise.  
^ Rinse under running water.  
,The triple filter system must be  
inserted and locked. Large particles  
could get in the circulation system  
and cause a blockage.  
^ Close the flap so that the clip  
engages.  
42  
Cleaning and Care  
Cleaning the spray arms  
Sometimes particles of food get stuck  
in the spray arm jets. The spray arms  
should be inspected and cleaned every  
4 - 6 months.  
^ Turn off the dishwasher before  
cleaning.  
Removing the spray arms  
^ Remove the cutlery tray (if present).  
^ Press the top spray arm up to  
engage the inner ratchet and  
unscrew the spray arm.  
^ Pull the lower spray arm firmly  
upwards to remove.  
^ Lift up the middle spray arm, a, to  
engage the ratchet and unscrew the  
spray arm, b.  
^ Use a pointed object such as a  
toothpick to push food particles into  
the spray arm jets.  
^ Remove the lower basket.  
^ Rinse thoroughly under running  
water.  
^ Return the spray arms and check  
that they rotate freely.  
43  
Cleaning and Care  
Cleaning the water inlet filter  
A filter is incorporated into the intake  
hose attached to the dishwasher’s shut  
off valve. If your water is hard or the  
pipes contain sediment, this filter may  
clog and prevent enough water from  
entering the wash cabinet.  
,The plastic housing of the water  
connection contains electrical  
wiring. Do not submerge the  
housing in liquid.  
Do not cut the intake hose or  
submerge it in liquid.  
^ Carefully remove the rubber seal.  
Installing an in-line water filter  
^ Remove the filter using needle nose  
pliers and rinse it under running  
water.  
If your water contains a large number of  
insoluble substances, a filter between  
the water valve and the intake hose  
connection is recommended. These  
filters can be purchased from Miele.  
^ Reinsert the filter and seal. Make sure  
they are seated correctly.  
^ Screw the intake hose back on the  
water valve, checking that it is not  
cross-threaded.  
Cleaning the filter  
^ Turn off the dishwasher and pull the  
plug.  
^ Slowly turn on the water supply and  
test for leaks.  
^ Turn off the water supply.  
^ Unscrew the intake hose.  
44  
Cleaning and Care  
Cleaning the drain pump and  
non-return valve  
If the dishwasher is not completely  
drained at the end of a program, the  
drain pump or non-return valve may be  
blocked.  
^ Turn off the dishwasher and pull the  
plug.  
^ Remove the triple filter (see "Triple  
filter system").  
^ Use a jug or bowl to scoop water out  
of the wash cabinet.  
The drain pump is beneath the  
non-return valve (see arrow).  
^ Remove all foreign objects from the  
drain pump (glass or bone splinters).  
^ Before returning the non-return valve,  
check that the drain pump is not  
blocked. Spin the propeller several  
times in both directions to check for  
obstructions.  
^ Carefully reinsert the non-return valve  
and secure it with the locking clamp.  
,Make sure the locking clamp  
clicks into place!  
^ Tilt the locking clamp to the side a.  
^ Pull out the non-return valve b and  
rinse it under running water.  
^ Remove all foreign objects from the  
non-return valve.  
45  
46  
Installation Instructions  
For installation of the dishwasher  
please refer to the Installation Sheet  
supplied with these instructions.  
Help to protect the environment  
Disposal of the packing  
material  
Disposal of an old machine  
Old appliances may contain materials  
that can be recycled. Please contact  
your local recycling authority about the  
possibility of recycling these materials.  
The cardboard box and packaging  
protect the appliance during shipping.  
These materials are biodegradable and  
recyclable. Please recycle.  
Ensure that the appliance presents no  
danger to children while being stored  
for disposal. Before discarding an old  
appliance, unplug it from the outlet, cut  
off its power cord and remove any  
doors to prevent hazards.  
Ensure that any plastic wrappings,  
bags etc. are disposed of safely and  
kept out of the reach of children.  
Danger of suffocation!  
48  
Electrical connection  
,Installation, repairs and other  
work by unqualified persons could  
be dangerous. The manufacturer  
cannot be held responsible for  
unauthorized work.  
,Improper connection of the  
equipment grounding conductor  
can result in electric shock. Do  
not modify the plug provided with  
the appliance; if it will not fit the  
outlet, have a proper outlet  
Check that the voltage, frequency  
and fuse rating shown on the data  
plate match the household mains  
supply.  
installed by a qualified electrician.  
If there is any question  
concerning the proper electrical  
connection or grounding of this  
appliance to the power supply,  
please consult a licensed  
The power outlet must be accessible  
after installation. Do not use an  
extension cord to connect the  
dishwasher to the mains. Danger of  
overheating! See data plate on the  
right side of the door.  
electrician or call Miele’s  
Technical Service Department:  
U 1-800-999-1360  
V 1-800-565-6435  
A damaged power cord must only  
be replaced with a genuine Miele  
cord by a Miele service technician.  
Specifications  
The dishwasher comes equipped with a  
4 ft (1.2 m) power cord with a molded  
plug for connection to 120 V, 60 Hz,  
15 A grounded receptacle.  
GROUNDING INSTRUCTIONS  
THIS APPLIANCE MUST BE  
GROUNDED.  
In the event of a malfunction or  
breakdown, grounding will reduce the  
risk of electric shock by providing a  
path of least resistance for the electrical  
current. This appliance is equipped  
with a cord having an equipment  
grounding conductor and a grounding  
plug. The plug must be plugged into an  
appropriate outlet that is installed and  
grounded in accordance with all local  
codes and ordinances.  
49  
Plumbing  
Connection to the water supply  
,Do not drink water from the  
dishwasher!  
– The dishwasher can heat its own  
water to the temperature required by  
the wash program. This allows for  
connection of the machine to either a  
hot or cold water source. For lowest  
energy consumption connect the  
dishwasher to a cold water source.  
For fastest possible wash times, with  
slightly higher energy consumption,  
connect the dishwasher to a hot  
water source. All programs use hot  
water in the rinse cycles.  
,Do not cut the intake hose. It  
contains electrical wiring. If the hose  
is cut, the dishwasher will not work.  
There will be a waterleak and you  
could be injured. If the hose is too  
long, coil it neatly and place it  
behind the machine.  
– The inlet hose is approx. 5 ft. (1.5 m)  
long. A 5 ft (1.5 m) flexible metal  
hose (pressure resistant up to  
2030 psi) is available.  
– The water inlet hose comes  
equipped with a 3/4" female hose  
thread connector. This can be  
directly connected to a water supply  
with 3/4" MHT (male hose thread  
ends).  
– Water pressure: Must be between  
4.5 - 145 psi (0.3 - 10 bar).  
50  
Plumbing  
Drainage  
Venting the drainage system  
– The machine comes equipped with a If the dishwasher drain hose is  
built-in non-return valve on the  
discharge side to prevent waste  
water from flowing back into the  
dishwasher.  
connected to a floor drain or to a drain  
pipe that is less than 8" (20 cm) above  
the floor, the drain must be vented.  
Otherwise the water inside the  
dishwasher may siphon out during the  
wash program.  
– The dishwasher is equipped with a  
5 ft (1.5 m) flexible drain hose with an  
internal diameter of 7/8" (22 mm).  
^ Open the dishwasher door and  
remove the lower basket.  
– Drain hose extensions and adapters  
can be ordered from Miele.  
The maximum drain hose length is  
13 ft. (4 m), max. drain height: 39"  
(1 m).  
^ Pull the lower spray arm firmly  
upwards to remove.  
– If the hose is to be directly fitted to  
the drainage outlet on site, use the  
supplied hose clip.  
– The hose can be installed to the left  
or right side.  
– The existing drain pipe for the drain  
hose is designed for various hose  
diameters. The drain pipe must be  
shortened if the drain pipe extends  
too far into the drain hose. The drain  
hose could get clogged.  
^ Cut off the vent cap located at the  
right rear of the triple filter system, as  
illustrated.  
– The drain hose must not be  
shortened.  
– Make sure the hose is installed  
without kinking, pressure or being  
pulled.  
51  
Alterations reserved/1906  
G 2140 / G 2150  
M.-Nr. 06 696 010 / 03  
en - US / CDN  

Toshiba Barcode Reader Gc10 Qm User Manual
Sunbeam Major Appliances Odor Grabber User Manual
Smc Networks Robo Cylinder Rgd4c User Manual
Sharp Fo 4700 User Manual
Sanyo Ecoi Spw Cr605gxh8b User Manual
LENOVO Z40 User Manual
HP 5253B User Manual
DELL ULTRASHARP UP2718Q User Manual
CANON TS3400 User Manual
BLUE OX BX88271 User Manual