MAYTAG MSF25D4MD User Manual

Side by Side Refrigerator  
PRODUCT MODEL NUMBERS  
MSF21D4MD MSF25D4MD  
PRODUCT DIMENSIONS  
A
Electrical: A 115-Volt, 60-Hz., AC-only 15- or  
20-amp fused, grounded electrical supply is  
required. It is recommended that a separate circuit  
serving only your refrigerator be provided. Use an  
outlet that cannot be turned off by a switch. Do not  
use an extension cord.  
not incl.  
handle  
D
overall  
B
C
top of  
incl.  
NOTE: Before performing any type of installation,  
cleaning, or removing a light bulb, turn the control  
(Thermostat, Refrigerator or Freezer control  
depending on the model) to OFF and then  
disconnect the refrigerator from the electrical  
source. When you are finished, reconnect the  
refrigerator to the electrical source and reset the  
control (Thermostat, Refrigerator or Freezer  
control depending on the model) to the desired  
setting.  
cabinet  
handle  
E
F
90˚  
90˚  
Water: A cold water supply with water pressure  
between 30 and 120 psi (207 and 827 kPa) is  
required for the ice maker.  
Handle and door style will vary  
with model.  
Dimensions “C” and “D” include  
rollers extended ³⁄₄" (1.9 cm).  
IMPORTANT: The pressure of the water supply  
coming out of a reverse osmosis system going to  
the water inlet valve of the refrigerator needs to be  
between 30 and 120 psi (207 and 827 kPa).  
Depth  
Depth “F”  
with Doors  
Model  
Size  
Depth  
“A”  
w/Handle  
“B”  
Cab.  
Overall  
Cab.  
Model #  
Height “C” Height “D” Width “E” Open 90°  
If a reverse osmosis water filtration system is  
connected to your cold water supply, the water  
pressure to the reverse osmosis system needs to  
be a minimum of 40 to 60 psi (276 to 414 kPa).  
3238  
"
35"  
6578 6618 4678  
"
"
33"  
"
21.3  
cu. ft.  
MSF21D4MD  
MSF25D4MD  
(82.2 cm) (88.9 cm) (167.3 cm) (168.0 cm) (83.8 cm) (119.1 cm)  
3238 3458 6878 6918 4978  
"
"
"
"
36"  
"
24.6  
cu. ft.  
(82.2 cm) (87.9 cm) (174.9 cm) (175.6 cm) (91.4 cm) (126.7 cm)  
LOCATION REQUIREMENTS  
1
To ensure proper ventilation for your refrigerator, allow for 2" (1.25 cm) of space on  
each side and at the top. Allow for 2" (5.08 cm) of space behind the refrigerator. If  
your refrigerator has an ice maker, allow extra space at the back for the water line  
connections. When installing your refrigerator next to a fixed wall, leave a 2"  
(5.08 cm) minimum space on each side (depending on your model) to allow the  
doors to swing open.  
Normal minimum cabinet cut-out width required for product installation is 36"  
(91.44 cm). However, if the product is placed against an extended wall and the  
ability to remove the crisper pans is desired, an additional 18" (45.72 cm) of cabinet  
width is required, so a total cabinet opening width of 54" (137.16 cm) is  
recommended.  
1
/
2" (1.25 cm)  
NOTE: This refrigerator is intended for use in a location where the temperature  
ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The  
preferred room temperature range for optimum performance, which reduces  
electricity usage and provides superior cooling, is between 60°F (15°C) and 90°F  
(32°C). It is recommended that you do not install the refrigerator near a heat source,  
such as an oven or radiator.  
2" (5.08 cm)  
Because Whirlpool Corporation policy includes a continuous commitment to improve  
our products, we reserve the right to change materials and specifications without notice.  
Dimensions are for planning purposes only. For complete details, see Installation  
Instructions packed with product. Specifications subject to change without notice.  
Ref. W10611006B  
6/11/14  

Toshiba Ras 13gavp E User Manual
Toshiba E Studio 855 User Manual
Samsung As24cm1n User Manual
Samsung As07s8ge User Manual
MAYTAG RTD1900 User Manual
Manual Syphon Pump User Manual
DELL D2421DS User Manual
DELL 24 P2421 User Manual
BLACK DECKER DUST BUSTER CHV1688 User Manual
22 Quart Mirro Pressure Cooker User Manual