Linak Medline La32 User Manual

P R O D U C T D ATA S H E E T  
ACTUATOR  
LA32  
Features:  
• 24 V DC permanent magnet motor  
• Thrust up to 6000 N (with ball screw)  
• Stainless steel piston rod  
• High-strength plastic housing protects motor  
and gears  
• Elegant and compact design with small  
installation dimensions  
• Protection class: IPX1  
• Colour: black  
• 2250 mm straight cable with 6.3 mm jack plug  
• Low noise level: 46 dB (A); measuring method  
DS/EN ISO 3746, actuator not loaded  
• LA32K with ball screw and double-acting brake  
(i.e. push and pull / both directions)  
Options:  
• Protection class: IPX5 or IPX6  
• Reed-switch for exact positioning (8 pulses per  
spindle revolution)  
• LA32 with 5 mm pitch F: Manual quick release  
• LA32 with 5 mm pitch FH: Manual quick release  
with dampened movement  
• Mechanical splines function (push only)  
• Electrical splines function, built-in micro-switch in  
back fixture, the actuator can therefore only be  
used for push. (Only with 01 and 02 back fixture)  
• LA32K with ball screw and double-acting brake  
(i.e. push and pull/both directions)  
• LA32KAS with ball screw and safety nut  
• LA32KSM with ball screw, safety nut and  
mechanical splines  
• Available with 0.2 m or 0.4 m coiled cable  
• LA32JKSM available with 2-speed facility for the  
LINAK JUMBO SYSTEM  
• CS32; electronic limit switch (built-in)  
Usage:  
• Duty cycle: Max. 10% or 2 minutes continuous use  
followed by 18 min. not in use  
The LA32 is a powerful actuator that can be supplied  
with a ball screw spindle to give outstanding perfor-  
mance. The ideal choice for a wide range of applica-  
tions including adjustment of hospital beds.  
• Ambient temperature +5° to +40° C  
• For use with LINAK control boxes CB8, CB12, CB14  
and CS16 PCB or internal CS32 PCB  
• Should LA32 be used with a non LINAK control  
unit, please ask the nearest LINAK representative  
for further details  
The LA32 has many special options including a safety  
nut, splines, quick release (F) and an optional protec-  
tion class up to IPX6 standard.  
Accessories::  
• CS16; electronic limit switch  
• Optical encoder  
• SLS: safety limit switch  
Dimension  
+0.1  
0
30  
Ø10.1  
+0.2  
Ø10.1  
0
11  
51  
24.5  
13  
204  
30  
S
S + 173  
28  
+0.2  
0
Ø12.1  
18  
36  
LINAK A/S  
LA32001B  
01  
S + 173: (with/without safety nut)  
02  
05  
06  
Installation dimensions:  
(Min. install dim. 273 mm) S + 181: (LA323. with/without safety nut)  
S + 184: with splines  
S + 198: with splines and safety nut  
S + 210: LA32K, LA32KAS, LA32 with safety nut  
S + 215: with brake  
3D view of the back fi xture.  
(here type “01” is shown.  
Drawing no.: 0321200  
S + 267: LA32KSM  
LA32 with quick release:  
05  
01  
02  
06  
Drawing no.: LA32F001C  
Install. dimensions:  
S + 173: LA32.F  
S + 196: LA32FH  
Technical specifications:  
Type  
Push  
321xxx+00xxx4xx  
322xxx+00xxx4xx  
3000  
3000  
(2000N)  
13.6/8.5  
(2000N)  
4.5  
322xxx+40xxx4xx  
32Kxxx+x0xxx4xx  
32Kxxx+10xxx4xx  
32Kxxx+30xxx4xx  
3000  
#
#
328xxF+x0xxx4xx  
32Kxxx+30xxx3xx  
9.5  
15/6.5  
7500  
(7500N)  
(7500N)  
The above measurements are made in connection with a CB12, the LA32JKSM with a CBJ1 high speed.  
P
= Stroke lengths where potentiometer is possible as standard  
* LINAK control boxes are designed so that they will short-circuit the motor terminals (poles) of the actuator(s) when the actuator(s) are not  
running. This solution gives the actuator(s) a higher self-locking ability. If the actuator(s) are not connected to a LINAK control box the termi-  
nals of the motor must be short-circuited to achieve the above mentioned self-locking ability.  
# = Not with spindle potentiometer (stroke length max. 220 mm)  
K
= Ball screw  
KAS = Ball screw with safety nut  
KSM = Ball screw with splines and safety nut  
R
= Reed-switch  
F
= Manual quick release  
FH  
= Manual quick release with dampened movement  
KAS and KSM are only available on LA32K (with ball screw)  
Graphs:  
LA32 current v´s load  
LA32 speed v´s load  
16  
5
4,5  
4
6mm pitch  
14  
6mm pitch  
Ball screw  
5mm pitch  
3mm pitch  
12  
3,5  
3
10  
8
5mm pitch  
3mm pitch  
Ball screw  
2,5  
2
1,5  
1
0,5  
0
6
4
2
0
1000  
2000  
3000  
4000  
5000  
6000  
0
0
1000  
2000  
3000  
4000  
5000  
6000  
Thrust (N)  
Thrust (N)  
Measurements are made in connection with a CB12  
Terms of use  
The user is responsible for determining the suitability of LINAK products for specific application.  
LINAK takes great care in providing accurate and up-to-date information on its products.  
However, due to continuous development in order to improve its products, LINAK products are  
subject to frequent modifications and changes without prior notice. Therefore, LINAK cannot  
guarantee the correct and actual status of said information on its products.  
While LINAK uses its best efforts to fulfil orders, LINAK cannot, for the same reasons as  
mentioned above, guarantee the availability of any particular product. Therefore, LINAK reserves  
the right to discontinue the sale of any product displayed on its website or listed in its catalogues  
or other written material drawn up by LINAK.  
All sales are subject to the Standard Terms of Sale and Delivery for LINAK. For a copy hereof,  
please contact LINAK.  

Source Technologies 1352 Micr 40 User Manual
Sears Kenmore 66162463 User Manual
Samsung Ast18s0gb User Manual
NEC NP 24LU01 User Manual
Mitsubishi Electronics Mitsubishi Digital Electronics Air Conditioner Msz Fdna User Manual
HITACHI 42HDS69 User Manual
GE 15079 User Manual
DELL S2721NX User Manual
DELL S2318HN User Manual
BROTHER FAX 1820C User Manual