LG LAC3715R User Manual

LAC3700R_ENG_DG  
LAC3700R/ 3705R/ 3710R/ 3715R  
ENGLISH  
GERMAN  
CAR CD/MP3/WMA Receiver  
Read the manual carefully before using the unit  
Auto-CD-/MP3-/WMA-Receiver  
Lesen Sie diese Bedienungsanleitung vor Gebrauch des  
Gerätes sorgfältig durchl'appareil.  
P/NO : MFL37340927  
• A defective or soiled disc inserted into unit can cause sound to drop out  
during playback.  
• Handle the disc by holding its inner and outer edges.  
• Do not touch the surface of the unlabeled side of the disc.  
Do not stick paper or tape etc. on the surface.  
Do not expose the disc to direct sunlight or excessive heat.  
This unit cannot play 8cm disc (use 12cm disc only).  
8 cm  
• Clean the disc before playback. Wipe the disc from the center outward  
with a cleaning cloth.  
• Never use solvents such as benzine or alcohol to clean the disc.  
Periodically wipe the contacts on the back of the control panel with a  
cotton swap moistened with alcohol.  
A section whose title has one of the following symbols is applicable only to the disc  
represented by the symbol.  
CD  
MP3  
WMA  
WMA files  
Audio CDs  
MP3 files  
MP3/WMA Disc compatibility with this unit is limited as follows:  
1. Sampling Frequency / 8 - 48kHz (MP3) 22.05 - 48kHz (WMA)  
2. Bit rate / within 8 - 320kbps (include VBR) (MP3) 32 -320kbps (WMA)  
3. CD-R/CD-RW file system should be “ISO 9660”  
4. If you record MP3/WMA files using software which cannot create a FILE SYSTEM, for example  
“Direct-CD” etc., it will not be possible to playback MP3/WMA files. We recommend that you use  
“Easy-CD Creator” which creates an ISO9660 file system.  
Customers should also note that permission is required in order to download MP3/WMA files and  
music from the Internet.  
Our company has no right to grant such permission.  
Permission should always be sought from the copyright owner.  
Disposal of your old appliance  
1. When this crossed-out wheeled bin symbol is attached to a product, it means the product is  
covered by the European Directive 2002/96/EC.  
2. All electrical and electronic products should be disposed of separately from the municipal  
waste stream via designated collection facilities appointed by the  
government or the local authorities.  
3. The correct disposal of your old appliance will help prevent potential negative  
consequences for the environment and human health.  
4. For more detailed information about disposal of your old appliance, please  
contact your city office, waste disposal service or the shop where you purchased the prod-  
uct.  
This product is manufactured to comply with Directive 2005/83/EEC(ANNEX I , 3.2.9),  
72/245/EEC, and 2006/95/EC.  
3
Table of contents  
Safety note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3  
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Remote control (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-8  
Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-11  
Radio operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
RDS operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
CD/MP3/WMA operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-15  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Before use  
Detaching the control panel  
The control panel of this unit can be detached to prevent theft.  
1
2
3
4
Press the “ ” (RELEASE) to open the control panel.  
Hold the right part of the control panel.  
Pull out the control panel.  
Place the control panel in the supplied protective case.  
1
4
3
2
Control panel  
Attachable control panel  
Protective Case  
1
2
Align the left side of the panel with the stopper.  
Push the right side or panel into the unit until it clicks.  
Caution  
The control buttons may not work properly if the control  
panel is not attached properly. If this occurs, gently press  
the display.  
Do not leave the control panel in any area exposed to high  
temperatures or direct sunlight.  
Do not drop the control panel or otherwise subject it to  
strong impact.  
Do not allow such volatile agents as benzine, thinner, or  
insecticides to come into contact with the surface of the  
control panel.  
2
1
4
Control panel  
1
2
EJECT Z  
7
8
DISC SLOT  
• Folder Up/Down [F+/F-]  
Alternative frequency  
[AF(REG)]  
• Skip / Search B[ +  
• Seek/ Tune B[ +  
Display [DISP]  
MP3  
WMA  
15 Shuffle [SHF]  
16 Repeat [RPT]  
17 Intro Scan [SCAN]  
18 Play/Pause B X  
19 Extreme Dynamic Sound  
System [XDSS]  
3
4
5
Traffic Announcement [TA]  
Remote Sensor - Optional  
• Volume  
9
10 Release  
11 Select [SEL S ]  
12 • Skip / Search - [b  
• Seek/ Tune - [b  
13 Preset Station [1-6]  
14 • MP3 Track +10/-10  
• [MUTE]  
• Power [PWR]  
• Auto Store [AS]  
• Preset Scan [PS]  
• Equalizer [EQ]  
6
20 [BAND]  
21 Programme Type [PTY]  
22 SOURCE [SRC S]  
MP3  
WMA  
[F+/F-]  
Remote control (optional)  
9
[BAND]  
1
2
3
4
5
6
7
Power [POWER] / Mute  
Select [SEL]  
1
10 Volume Up  
11 Number [#]  
12 Repeat [RPT]  
13 Preset Station [1-6]  
14 Number [0 -9]  
15 • CD Skip  
/ Search M M?  
• Seek / Tune M M?  
16 Display [DISP.]  
17 • MP3 Track -10  
/ Down  
Source [SRC]  
2
3
10  
11  
Play / Pause B/X  
Intro Scan [SCAN]  
Shuffle [SHF]  
4
5
6
7
12  
13  
14  
• MP3 Track +10  
MP3  
WMA  
• Folder Up [F+]  
15  
8
MP3  
WMA  
8
• CD Skip  
16  
17  
9
MP3  
WMA  
/ Search ?m m  
• Seek / Tune ?m m  
• Folder Down [F-]  
MP3  
WMA  
5
Battery Installation  
1
2
3
Pull out the battery holder with a sharp product  
like a ball point pen.  
Put the battery with  
battery holder.  
and  
correctly on the  
Push the battery holder back into its original  
position.  
Note  
• Use only one CR2025 (3V) lithium battery.  
• Remove the battery if the remote control is not  
used for a long period of time.  
• Do not leave the product in a hot or humid place.  
• Do not handle the battery with metallic tools.  
• Do not store the battery with metallic materials.  
Installation  
Basic Installation  
Before installing, make sure that the ignition-switch is set to  
OFF and remove the terminal of the car battery to avoid  
short-circuiting.  
Bend the claws  
according to  
the thickness  
of the  
dashboard  
1
2
3
4
Remove the existing receiver unit.  
Make the necessary connections.  
Install the installation sleeve.  
Install the unit into the installation sleeve.  
Control panel  
Removing the existing receiver unit  
If there is already an installation sleeve for the receiver unit  
in the dashboard, it must be removed.  
A
1
2
3
Remove the rear support from the unit.  
Remove the control panel and trim ring from the unit.  
Insert the lever A into the hole on one side of the unit.  
Perform the same operation on the other side and pull  
the unit out from the mounting sleeve.  
A
ISO-DIN Installation  
1
2
3
4
5
6
Slide the unit into the ISO-DIN frame.  
Fit screws removed from the old unit.  
Slide the unit and frame into the dash opening.  
Install the dash panel or adapter plate.  
Install the trim ring to the unit.  
1
2
4
3
5
Install the control panel to the unit.  
6
Control panel  
6
Connection diagram  
Before connecting, make sure that the ignition switch is set to OFF, and remove the battery #  
terminal to avoid short circuits.  
B
1
2
3
4
5
6
7
8
To Speaker  
To Vehicle  
1
2
3
4
5
6
7
8
r
A
B
A
(Optional)  
(Optional)  
2
A
PHONE MUTE (ORANGE)  
8
A
GROUND(-) (BLACK)  
6
A
DIMMER (PINK)  
DIMMER SWITCH  
IGNITION SWITCH  
7
A
TO IGNITION (RED)  
4
A
TO BATTERY(+) (YELLOW)  
5
A
POWER ANTENNA (BLUE)  
1
2
BATTERY  
AMPLIFIER  
(Optional)  
C
1
A
REMOTE ON (BLUE/WHITE)  
3
4
5
6
7
8
POWER  
Antenna  
CONTROL RELAY  
B 1. Violet : Rear Right +  
B 2. Violet/ Black Stripe : Rear Right –  
B 3. Gray : Front Right +  
B 4. Gray / Black Stripe : Front Right –  
B 5. White : Front Left +  
B 6. White/Black Stripe : Front Left –  
B 7. Green : Rear Left +  
B 8. Green/ Black Stripe : Rear Left –  
7
A
B
From antenna  
To the wiring of the vehicle colors of leads.  
• BLACK:  
• ORANGE:  
• PINK:  
This lead is for the ground connection.  
This lead is for the phone line connection.  
This lead is for the dimmer line connection.  
• RED:  
This lead is for connection to the power supply terminal when the ignition  
switch is set to ACC.  
• YELLOW:  
• BLUE:  
This lead is for connection to the battery (back-up) terminal from which  
power is always supplied.  
This lead is for the power antenna connection.  
• BLUE/WHITE: This lead is for the remote amplifier on connection.  
C
Speaker Connections  
1
2
3
4
5
6
7
8
REAR  
FRONT  
REAR  
FRONT  
L
L
R
R
Connecting to Auxiliary Equipment (Optional)  
Connect the AUDIO OUTPUT jack of this unit to the AUDIO INPUT jack of the Auxiliary  
Equipment.  
RL (Rear Left)  
FL (Front Left)  
RR (Rear Right)  
FR (Front Right)  
To AUDIO OUT  
To AUDIO IN  
To AUDIO IN  
Amplifier  
8
Basic operation  
Turning the unit on  
Press MUTE/PWR (POWER on the remote control) or any other button.  
Note  
When you insert the CD in the CD slot, the unit turns on.  
Turning the unit off  
Press and hold MUTE/PWR (POWER on the remote control).  
Selecting a source  
Press SRC S repeatedly to select a source.  
The indicator lights up in the following order. TUNER CD TUNER...  
Note  
You cannot select a source if a CD is not inserted.  
Adjusting the volume  
Rotate MUTE/PWR (Press VOLUME  
on the remote control) to adjust the sound level.  
Note  
When you turn the unit off, the current volume level is automatically memorized. Whenever  
you turn the unit back on, it will operate at the memorized volume level.  
Mute  
1
2
Press MUTE/PWR (POWER  
To cancel it, press again.  
on the remote control) to cut the sound.  
Checking the clock  
You can see the clock pressing DISP (DISP. on the remote control).  
Note  
If the unit is receiving RDS broadcasting with CT (Clock Time) information,  
the clock will be shown automatically in the display window .  
Unless, “NO CLOCK” appears in the display window.  
Changing the general settings  
1
2
Press and hold SEL [S] (SEL on remote control) so that one of menu items appears.  
Press SEL [S] (SEL on remote control) to scroll between menus.  
TA ALARM t PI SOUND t DEMO OFF t BEEP 2ND  
Rotate MUTE/PWR clockwise or unclockwise to select one of the settings specified  
belows.  
3
4
(Press VOLUME  
on the remote control.)  
Press and hold SEL [S] (SEL on remote control) to finish the setting.  
9
TA(Traffic Announcement) ALARM / SEEK  
TA ALARM :  
When a newly tuned station has no TP information for 5 seconds, a double beep sound is  
output.  
TA SEEK :  
When the newly tuned station does not receive TP information for 5 seconds, the receiver  
retunes to the next station which has the same PI as the last station, but has the TP  
information.  
PI (Programme Identification) SOUND / MUTE  
PI SOUND :  
If the sound of a station with different PI is heard intermittently, the receiver mutes the  
sound after 1 second.  
PI MUTE :  
If the sound of a station with different PI is heard intermittently, the receiver mutes the  
sound right now.  
DEMO ON / OFF  
You can change the initial indication on the display to information name (function name,  
EQ name, etc...) while listen to a source.  
DEMO ON  
Displays information name while listen to source.  
DEMO OFF  
Cancels the function.  
BEEP 2ND / ALL  
Sets the beep sound every time a button is pressed.  
BEEP 2ND  
The beep is generated when a key is long pressed. (1 sec)  
BEEP ALL  
The beep is generated when any key is pressed.  
RDS AF/REG FUNCTION  
To switch on or off the AF function (Network-Tracking), shortly press the AF(REG) button. To  
switch on or off the REG function (Regional Network Tracking), press the AF(REG) button  
longer than 2 seconds.  
AF(Alternative frequency) ON / OFF  
When the reception quality worsens, the tuner automatically changes to another station in  
the network, broadcasting a better reception quality, using the PI and AF codes.  
AF ON (“AF” appears on display window) :  
Wherever you drive, you can continue to listen to the same program without interruptions.  
AF OFF (“AF” disappears on display window):  
Only station name will be displayed. In case of poor reception no alternative station can  
be used.  
REG (Region) ON / OFF  
REG ON :  
The unit switches to another station, within the same network, broadcasting the same  
program when the receiving signals from the current station become weak.  
REG OFF :  
The unit switches to another station, within the same network when the receiving signals  
from the current station become weak. (This mode, the program may differ from the one  
currently received.)  
10  
Using the EQ (Equalizer)  
Press EQ repeatedly. The indicator lights up in the following order.  
POP t CLASSIC t ROCK t JAZZ t VOCAL t SALSA t SAMBA t USER1  
t USER2 t OFF  
• POP  
: Optimized for R&B, Soul and Country music.  
• CLASSIC : Optimized for orchestral music.  
• ROCK  
• JAZZ  
: Optimized for Hard Rock and Heavy Metal music.  
: Sweet sound with soft feeling.  
• VOCAL  
• SALSA  
: Powerful realism with strong sound quality.  
: Reproduces salsa music acoustics.  
• SAMBA : Reproduces samba music acoustics.  
• USER1  
• USER2  
: Use the menu to set the sound level you want.  
: Use the menu to set the sound level you want.  
You can adjust each sound level to your preference. Once you select a USER mode and then  
make an adjustment, it automatically stored for the currently selected USER mode.  
Adjusting the sound level  
1
Press SEL [S] (SEL on the remote control) repeatedly to select the mode you want to  
adjust from volume, bass, middle, treble, balance and fader.  
The indicator lights up in the following order.  
VOL t BAS t MID t TRB t BAL t FAD  
Rotate the MUTE/PWR (Press VOLUME  
2
on the remote control) to adjust the sound  
quality.  
Turn right  
Turn left  
Indication  
Increase the volume level.  
Decrease the volume level.  
VOL  
Increase the bass level.  
Increase the middle level.  
Increase the treble level.  
Decrease the bass level.  
Decrease the middle level.  
Decrease the treble level.  
BAS  
MID  
TRB  
BAL  
Decrease the level of the  
left speaker(s).  
Decrease the level of the right  
speaker(s).  
Decrease the level of the front  
speaker(s).  
Decrease the level of the rear  
speaker(s).  
FAD  
Note  
When EQ and XDSS+ is set to “Off”, you can adjust the sound level (BAS, MID, TRB)  
settings.  
XDSS+ (Extreme Dynamic Sound System)  
1
Press XDSS  
XDSS+ : Improves the treble, bass sound.  
To cancel, press XDSS again.  
2
11  
Radio operation  
Listening to radio stations  
1
2
Press SRC S to select the tuner.  
Press the BAND repeatedly to select a band.  
The indicator lights up in the following order. FM1 t FM2 t FM3 t MW(AM)  
3
Auto Seek : Press - [b/B[ + (?m m/M M? on the remote control).  
When a station is received, searching stops.  
Manual Seek : Press and hold - [b/B[ + (?m m/M M? on the remote control) until  
“MANUAL” appears, and then press it repeatedly.  
The frequencies move up or down step by step.  
Storing and recalling broadcast frequencies  
You can easily store up to 6 broadcast frequencies for later recall at the touch of a button.  
1
2
3
Press BAND to select desired band you want to store.  
Select the desired frequency.  
Press one of preset buttons 1-6 and hold until the beep sound.  
The number you have pressed will flash in the preset number indicator and then remain  
lit. The selected radio station frequency has been stored in memory.  
Repeat steps 1-3 to preset other stations.  
4
The next time, you press the same preset button, the radio station frequency is  
recalled from the memory.  
Note  
Up to 18 FM stations, 6 for each of three FM bands and 6 MW(AM) stations can be stored  
in the memory.  
When a station is stored on the preset numbers on which another station of the same band  
has already been preset, the previously preset station is automatically erased.  
Auto search memory  
This function lets you automatically store the 6 strongest broadcast frequencies.  
1
Press AS/PS until “A/S” appears.  
The six strongest broadcast frequencies will be stored under preset button 1-6 in the order  
of their signal strength.  
2
To cancel, press AS/PS.  
To scan the preset stations  
Press AS/PS. Each preset station appears. To cancel, press AS/PS.  
To tune in the preset stations  
Press BAND to select the desired band and press the desired preset button 1-6 (preset  
button 1-6 on the remote control).  
The preset station of the preset button 1-6 is displayed and the preset station is received.  
12  
RDS operation  
RDS Display options  
In normal RDS operation the display will indicate the station name. Pressing DISP  
enables you to cycle through the various data types in the following sequence:  
CT t FREQUENCY t PTY t RT t PS  
• CT (Time controlled by the channel)  
• PTY (Programme type recognition)  
• RT (Radio text recognition)  
• PS (Programme Service name)  
• PI (Programme Identification)  
• AF (Alternative Frequencies for the actual programme)  
TP (Traffic programme Identification)  
• TA (Traffic Announcement Identification)  
PTY (Programme Type) function  
To select a certain program type out of the reception band, following procedure can be  
operated.  
1
2
Press BAND to select in FM mode.  
After, pressing PTY button one by one activated as selecting each mode.  
music grouptspeech grouptsearch off  
3
Press one of the PRESET (1-6) button shortly. Each time this button is pressed, the  
display mode changes as follow.  
No  
Music group  
No  
Speech group  
1.  
2.  
3.  
4.  
5.  
6.  
Pop M, Rock M  
Easy M, Light M.  
Classics, Other M  
Jazz, Country  
Nation M, Oldies  
Folk M  
1.  
2.  
3.  
4.  
5.  
6.  
News, Affairs, Info  
Sport, Educate, Drama  
Culture, Science, Varied  
Weather, Finance, Children  
Social, Religion, Phone In  
Travel, Leisure, Document  
TA (Traffic Announcement) function  
TA reception allows the unit to switch temporarily to a Traffic Announcement from the current  
source (another FM station, CD, or other connected components).  
To switch the TA (Traffic Announcement) function on or off, press TA.  
TA ON  
Traffic programs and announcements can be automatically received using TP/TA features.  
TA OFF  
Traffic programs and announcements can not be received using TP/TA features.  
13  
CD/MP3/WMA operation  
Playing an Audio CD and MP3/WMA Disc  
The unit can play MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs.  
Before playing MP3/WMA recordings, read the notes on MP3/WMA Recordings on page 3.  
If you change the source, CD play also stops (without ejecting the CD). Next time you select  
“CD” as the source, CD play starts from where playback has been stopped previously.  
To directly play a file, press NUMBER (#) on remote control and then press the track  
number with 0-9 number.  
Pause  
1 Press B/X during playback.  
2 To return to playback, press B/X again.  
Skip to next track/file  
Press briefly B[ + (M M? on the remote control) to select the next track or file.  
Skip to previous track/file  
Press briefly - [b (?m m on the remote control) within 3 seconds of playing time.  
Return to the beginning of the current track/file  
Press briefly - [b (?m m on the remote control) after 4 seconds of playing time.  
Search  
Press and hold - [b/B[ + (?m m/M M? on remote control) for about 1 second during  
playback and then release at the point you want.  
Intro scan  
The first 10 seconds of each tracks/files (SCAN) or each files in the current selected folder  
(
SCAN) on the disc are played.  
1
Press SCAN.  
MP3  
WMA  
CD  
SCAN  
(or SCAN  
) appears on the display window.  
Press and hold SCAN for about 2 seconds during playback.  
MP3  
WMA  
SCAN appears on the display window.  
2
Press SCAN again.  
SCAN or  
SCAN disappear from the display window and the intro scan is cancelled.  
Repeat  
The current selected tracks/files (1 RPT) or folder (  
RPT) on the disc is played repeatedly.  
1
2
3
Press RPT during playback.  
1 RPT appears on the display window.  
Press and hold RPT for about 2 seconds during playback.  
CD  
MP3  
WMA  
MP3  
WMA  
RPT appears on the display window.  
Press RPT again.  
1 RPT or  
RPT disappear from the display window and the repeat mode is cancelled.  
14  
Shuffle  
All of the tracks/files (SHF) or the current selected folder (  
SHF) on the disc is played  
randomly.  
1
Press SHF during playback.  
MP3  
WMA  
CD  
SHF  
(or SHF  
) appears on the display window.  
Press and hold SHF for about 2 seconds during playback.  
MP3  
WMA  
SHF appears on the display window.  
2
Press SHF again.  
SHF or  
SHF disappear from the display window and the random playback is  
cancelled.  
Note  
During random playback, if you press - [b (?m m on remote control), you won’t go back to  
the previous track.  
CD TEXT / ID3 TAG  
When playing a disc containing information, you can see the CD TEXT/ID3 TAG information.  
In CD TEXT, information about the disc (disc title, performer and track title) is recorded.  
In a ID3 TAG, information about the file (Alburm title/ Song title/ Performer name) is recorded.  
In a WMA Content, information about the file (Song title/ Performer name) is recorded.  
If there is no information, “NO TEXT” will be shown in the display window.  
Press DISP (DISP. on the remote control) repeatedly during MP3/WMA/CD TEXT file play-  
back.  
MP3  
WMA  
To go to a particular quickly (+10/-10 steps)  
(If there is no folder or one folder.)  
Press F+ to skip to the next 10 track, and press F- to skip to the previous 10 track.  
MP3  
WMA  
To skip to the next or previous folder  
(If there are more than two folders.)  
Press F+ to skip to the next folder, and press F- to skip to the previous folder.  
Note  
Time display appearing on the display part when playing VBR file may vary and there may be  
some difference from actual time (both progress time and VBR are displayed at the same  
time when playing file).  
15  
Troubleshooting  
Sy  
Ca  
Ca  
The loaded disc is of a type this unit  
: Symptom /  
: Cause  
Co  
: Correction  
cannot play.  
Co  
Check what type the disc.  
Sy  
Power doesn’t turn on. / The unit  
Sy  
doesn’t operate.  
No sound is heard. / The volume  
Ca  
Leads and connectors are not properly  
level will not rise.  
Ca  
connected.  
Cables are not connected correctly.  
Co  
Co  
Confirm once more that all  
Connect the cables correctly.  
connections are correct.  
Ca  
Sy  
Ca  
Co  
The fuse is blown.  
There’s no sound.  
The volume level is low.  
Adjust the volume.  
Co  
Rectify the problem that caused the  
fuse to blow, and then replace it. Be very  
sure to install the correct fuse with the same  
rate.  
Sy  
Ca  
Co  
There’s audio skipping.  
This unit is not firmly secured.  
Secure this unit firmly.  
Ca  
Noise and other factors are causing  
the built-in microprocessor to operate  
incorrectly.  
Co  
Sy  
Turn the unit off and then on.  
The unit does not operate correctly  
even when the appropriate remote  
control buttons are pressed.  
Sy  
Playback is not possible.  
The disc is dirty.  
Ca  
Ca  
Battery power is low.  
Co  
Co  
Clean disc.  
Load new battery.  
Specifications  
GENERAL  
Output Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50W x 4CH (Max.)  
Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DC 12V  
Speaker impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Ω  
Ground System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Negative  
Dimensions (W x H x D) . . . . . . . . . . . . . . . . . . . . . .181.5 x 50 x 200 mm (Without Control Panel)  
Net Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5 kg  
CD SECTION  
Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Hz-20 kHz  
S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 dB  
Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.12%  
Channel Separation (1kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 dB  
RADIO SECTION  
FM  
Frequency Range . . . . . . . . . . . . . . . . . . . . . .87.5-107.9, 87.5-108, 65-74 or 87.5-108 MHz  
S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 dB  
Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.7%  
Usable Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 dBµV  
AM (MW)  
Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .520-1720 or 522-1620 kHz  
S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 dB  
Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.0%  
Usable Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 dBµV  
Designs and specifications are subject to change without notice.  
16  

York Affinity 292443 Xtg D 0508 User Manual
Sanyo Ecoi C0705dzh8 User Manual
MAKITA LXSF01 User Manual
HP F230 User Manual
DELL ULTRASHARP U2518DR User Manual
CRAFTSMAN 917.377300 User Manual
CRAFTSMAN 580.752550 User Manual
CRAFTSMAN 315.212240 User Manual
BLACK DECKER RO100 User Manual
ACER CHROMEBOOK 514 CB514 1H User Manual