LG DM2352D User Manual

OWNER’S MANUAL  
CINEMA 3D TV /  
LED LCD TV  
Please read this manual carefully before operating your TV  
and retain it for future reference.  
CINEMA 3D TV MODEL  
LED LCD TV MODEL  
DM2352D DM2352T  
DM2752D DM2752T  
M2252D M2252T  
M2352D M2352T  
M2452D M2452T  
M2752D M2752T  
LICENSES  
3
LICENSES  
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.  
Manufactured under license from Dolby Laboratories. “Dolby “and the  
double-D symbol are trademarks of Dolby Laboratories.  
The terms HDMI and HDMI High-Definition Multimedia Interface, and the  
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC  
in the United States and other countries.  
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a  
subsidiary of Rovi Corporation. This is an official DivX Certified® device that  
plays DivX video. Visit divx.com for more information and software tools to  
convert your files into DivX videos.  
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be  
registered in order to play purchased DivX Video-on-Demand (VOD) movies.  
To obtain your registration code, locate the DivX VOD section in your device  
setup menu. Go to vod.divx.com for more information on how to complete  
your registration.  
DivX Certified® to play DivX® video up to HD 1080p, including premium  
content.  
DivX®, DivX Certified® and associated logos are trademarks of Rovi  
Corporation or its subsidiaries and are used under license.  
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;  
7,515,710; 7,519,274  
INSTALLATION PROCEDURE  
4
INSTALLATION PROCEDURE  
Open the package and make sure all the accessories are included.  
Attach the stand to the TV.  
1
2
3
Connect an external device to the TV.  
NOTE  
Image shown may differ from your TV.  
yy  
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.  
yy  
The available menus and options may differ from the input source or product model that you are  
yy  
using.  
New features may be added to this TV in the future.  
yy  
ASSEMBLING AND PREPARING  
5
ASSEMBLING AND PREPARING  
Unpacking  
Check your product box for the following items. If there are any missing accessories, contact the local  
dealer where you purchased your product. The illustrations in this manual may differ from the actual  
product and accessories.  
NOTE  
The accessories supplied with your product may vary depending on the model.  
yy  
Product specifications or contents in this manual may be changed without prior notice due to  
yy  
upgrade of product functions.  
CAUTION  
Do not use any pirated items to ensure the safety and product life span.  
yy  
Any damages or injuries by using pirated items are not covered by the warranty.  
yy  
NOTE  
The items supplied with your product may vary depending on the model.  
yy  
Product specifications or contents of this manual may be changed without prior notice due to  
yy  
upgrade of product functions.  
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick  
yy  
and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory  
stick does not fit into your TV’s USB port.  
B
B
*A 10 mm  
*B 18 mm  
A
A
ASSEMBLING AND PREPARING  
6
M2252D M2352D M2452D M2752D M2252T M2352T M2452T M2752T  
Remote control.  
Batteries (AAA).  
CD (Owner's Manual).  
Cards.  
RGB Cable.  
Power Cord.  
AC-DC Adapter.  
Cable Tie.  
Stand Base.  
Stand Body. (Only M2252D /  
M2352D / M2452D / M2252T  
/ M2352T / M2452T model)  
Stand Body. (Only M2752D  
/ M2752T model)  
- M2252D, M2352D, M2452D,  
M2252T, M2352T, M2452T:  
- M2752D, M2752T:  
Screws for Assembly.  
2 EA (Only M2752D /  
M2752T model)  
ASSEMBLING AND PREPARING  
7
DM2352D DM2752D DM2352T DM2752T  
Remote control.  
Batteries (AAA).  
CD (Owner's Manual).  
Cards.  
RGB Cable.  
Power Cord.  
AC-DC Adapter.  
Cable Tie.  
Stand Base.  
Stand Body. (Only DM2352D /  
Stand Body. (Only DM2752D  
- DM2352D, DM2352T:  
DM2352T model)  
/ DM2752T model)  
- DM2752D, DM2752T:  
Screws for Assembly.  
2 EA (Only DM2752D /  
DM2752T model)  
3D Glasses(Normal type / Clip type)  
- The number of 3D glasses may  
differ depending on the model or  
country.  
TriDef 3D Game Software CD /  
Quick Installation Guide  
- Image shown may differ from your  
TV.  
ASSEMBLING AND PREPARING  
8
Separate purchase  
Dual play glasses  
AG-F2**DP, AG-F3**DP  
NOTE  
The illustrations in this manual may differ from the actual product and accessories.  
yy  
Separate purchase items can be changed or modified for quality improvement without any  
yy  
notification.  
Contact your dealer to buying these items.  
yy  
The model name or design may be changed depending on the upgrade of product  
yy  
functions,manufacturer’s circumstances or policies.  
ASSEMBLING AND PREPARING  
9
Parts and buttons  
Remote Control Sensor  
Standby Light  
Lighting On:Turned off  
yy  
Lighting Off:Turned on  
yy  
Touch Buttons  
Connection panel (See p.23)  
M**52T models (Only UK)  
Touch button  
Description  
Scrolls through the saved programmes.  
Adjusts the volume level.  
OK  
Selects the highlighted menu option or confirms an input.  
Accesses the main menus, or saves your input and exits the menus.  
Changes the input source.  
SETTINGS  
INPUT  
/ I  
Turns the power on or off.  
NOTE  
All of the buttons are touch sensitive and can be operated through simple touch with your finger.  
ASSEMBLING AND PREPARING  
10  
When holding the TV, the screen should face  
yy  
away from you to prevent the screen from  
scratches.  
Lifting and moving the TV  
When moving or lifting the TV, read the following  
to prevent the TV from being scratched or  
damaged and for save transportation regardless of  
its type and size.  
CAUTION  
Avoid touching the screen at all times, as  
this may result in damage to the screen or  
some of the pixels used to create images.  
When transporting the TV, do not expose the  
yy  
TV to jolts or excessive vibration.  
When transporting the TV, keep the TV  
upright, never turn the TV on its side, or tilt  
towards the left or right.  
It is recommended to move the TV in the  
yy  
box or packing material that the TV originally  
came in.  
yy  
Before moving or lifting the TV, disconnect  
yy  
the power cord and all cables.  
Hold the top and bottom of the TV frame  
yy  
firmly. Make sure not to hold the transparent  
part, speaker, or speaker grill area.  
ASSEMBLING AND PREPARING  
11  
Attach the Stand Base from the Stand Body by  
turning the screw to the right with a Coin.  
3
Setting up the TV  
M2252D M2352D M2452D M2252T  
M2352T M2452T DM2352D DM2352T  
Attaching the Stand  
If you are not mounting the TV to a wall, use the  
following instructions to attach the stand.  
Place the TV with the screen side down on a  
flat and cushioned surface.  
1
CAUTION  
Tighten the screws firmly to prevent the TV  
from tilting forward. Do not over tighten.  
CAUTION  
Lay a foam mat or soft protective cloth  
yy  
on the surface to protect the screen from  
damage.  
When attaching the stand to the TV,  
yy  
place the screen facing down on a  
cushioned table or flat surface to protect  
the screen from scratches.  
Attach the Stand Body from the TV.  
2
 
ASSEMBLING AND PREPARING  
12  
CAUTION  
Do not carry the monitor upside-down as this  
yy  
may cause it to fall off its stand, resulting in  
damage or injury.  
The illustration shows a general example of  
yy  
installation and may look different from the  
actual product.  
Do not carry the monitor upside-down by  
yy  
holding the stand body as this may cause it  
to fall off, resulting in damage or injury.  
The illustration shows a general example of  
yy  
installation and may look different from the  
actual product.  
ASSEMBLING AND PREPARING  
13  
Secure the TV and the Stand Body with the  
2 screws.  
3
M2752D M2752T DM2752D DM2752T  
If you are not mounting the TV to a wall, use the  
following instructions to attach the stand.  
Place the TV with the screen side down on a  
flat and cushioned surface.  
1
WARNING  
If you don`t fasten the screw tightly, TV will  
fall down and get damaged.  
Attach the Stand Body from the TV.  
2
Attach the Stand Base from the Stand Body by  
turning the screw to the right with a Coin.  
4
Insert the two Lockers of the Stand Body right  
into the groove of the TV head and secure  
them by pressing the left and right bottom  
sides.  
Locker  
CAUTION  
Tighten the screws firmly to prevent the TV  
from tilting forward. Do not over tighten.  
 
ASSEMBLING AND PREPARING  
14  
CAUTION  
Do not carry the monitor upside-down as this  
yy  
may cause it to fall off its stand, resulting in  
damage or injury.  
The illustration shows a general example of  
yy  
installation and may look different from the  
actual product.  
Do not carry the monitor upside-down by  
yy  
holding the stand body as this may cause it  
to fall off, resulting in damage or injury.  
The illustration shows a general example of  
yy  
installation and may look different from the  
actual product.  
ASSEMBLING AND PREPARING  
15  
Mounting on a table  
WARNING  
Lift and tilt the TV into its upright position on a  
table.  
1
When you adjust the angle, do not hold the  
buttom of the TV frame as shown on the  
following illustration, as may injure your fingers.  
Leave a 10 cm (4 inches) (minimum) space  
from the wall for proper ventilation.  
10 cm  
10 cm  
10 cm  
10 cm  
CAUTION  
Disconnect the power cord first, and then move  
or install the TV. Otherwise electric shock may  
occur.  
Connect the AC-DC Adapter and Power Cord  
to a wall outlet.  
2
CAUTION  
Do not place the TV near or on sources of  
heat, as this may result in fire or other damage.  
 
ASSEMBLING AND PREPARING  
16  
Using the Kensington security  
system  
NOTE  
Tilt from +20 to -5 degrees up or down to  
adjust the angle of the TV to suit your view.  
The Kensington security system connector is  
located at the back of the TV. For more information  
of installation and using, refer to the manual  
supplied with the Kensington security system or  
-5 +20  
Connect the Kensington security system cable  
between the TV and a table.  
Front  
Rear  
Tidying cables  
Gather and bind the cables with the supplied  
cable tie.  
NOTE  
The Kensington security system is optional.  
You can obtain additional accessories from  
most electronics stores.  
 
ASSEMBLING AND PREPARING  
17  
Pull out the Stand Body from the TV.  
3
Detaching the Stand  
M2252D M2352D M2452D M2252T  
M2352T M2452T DM2352D DM2352T  
Place the TV with the screen side down on a  
flat and cushioned surface.  
1
CAUTION  
Lay a foam mat or soft protective cloth  
yy  
on the surface to protect the screen from  
damage.  
When detaching the stand to the TV,  
yy  
place the screen facing down on a  
cushioned table or flat surface to protect  
the screen from scratches.  
Turn the screw to the left, and then pull out the  
Stand Base from the Stand Body.  
2
 
ASSEMBLING AND PREPARING  
18  
Remove 2 screws and pull out the Stand Body  
from the TV.  
3
M2752D M2752T DM2752D DM2752T  
Place the TV with the screen side down on a  
flat and cushioned surface.  
1
CAUTION  
Lay a foam mat or soft protective cloth  
yy  
on the surface to protect the screen from  
damage.  
When detaching the stand to the TV,  
yy  
place the screen facing down on a  
cushioned table or flat surface to protect  
the screen from scratches.  
Turn the screw to the left, and then pull out the  
Stand Base from the Stand Body.  
2
 
ASSEMBLING AND PREPARING  
19  
Please use VESA standard as below.  
5
Mounting on a wall  
784.8 mm (30.9 inch) and under  
yy  
For proper ventilation, allow a clearance of 10  
cm on each side and from the wall. Detailed  
installation instructions are available from your  
dealer, see the optional Tilt Wall Mounting Bracket  
Installation and Setup Guide.  
* Wall Mount Pad Thickness : 2.6 mm  
* Screw : 4.0 mm x Pitch 0.7 mm x  
Φ
Length 10 mm  
787.4 mm (31.0 inch) and above  
yy  
* Please use VESA standard wall mount pad  
and screws.  
VESA (A x B)  
Standard screw  
100 x 100  
M4  
Number of screws  
Wall mount bracket  
(optional)  
4
10 cm  
RW120  
10 cm  
10 cm  
10 cm  
VESA (A x B)  
yy  
If you intend to mount the TV to a wall, attach Wall  
mounting interface (optional parts) to the back of  
the TV.  
When you install the TV using the wall mounting  
interface (optional parts), attach it carefully so it  
will not drop.  
Please, Use the screw and wall mount interface  
in accordance with VESA Standards.  
1
If you use screw longer than standard, the TV  
might be damaged internally.  
2
3
If you use improper screw, the product might  
be damaged and drop from mounted position.  
In this case, LG Electronics is not responsible  
for it.  
VESA compatible only with respect to screw  
mounting interface dimensions and mounting  
screw specifications.  
4
ASSEMBLING AND PREPARING  
20  
CAUTION  
Disconnect the power cord first, and then  
yy  
move or install the TV. Otherwise electric  
shock may occur.  
If you install the TV on a ceiling or slanted  
yy  
wall, it may fall and result in severe injury.  
Use an authorized LG wall mount and  
yy  
contact the local dealer or qualified  
personnel.  
Do not over tighten the screws as this may  
yy  
cause damage to the TV and void your  
warranty.  
Use the screws and wall mounts that meet  
yy  
the VESA standard. Any damages or injuries  
by misuse or using an improper accessory  
are not covered by the warranty.  
NOTE  
Use the screws that are listed on the VESA  
yy  
standard screw specifications.  
The wall mount kit includes an installation  
yy  
manual and necessary parts.  
The wall mount bracket is optional. You can  
yy  
obtain additional accessories from your local  
dealer.  
The length of screws may differ depending  
yy  
on the wall mount. Be sure to use the proper  
length.  
For more information, refer to the instructions  
yy  
supplied with the wall mount.  
WATCHING TV  
21  
WATCHING TV  
Turning the TV on for the first time  
When you access the TV for the first time, the initial setting screen appears. Select a language and  
customize the basic settings.  
Connect the power cord to a power outlet.  
1
Press on the TV or power button on the remote control to turn the TV on.  
2
The Standby Light is turned off.  
NOTE  
When the TV is in Power saving mode, the Standby Light turns amber.  
The initial setting screen appears if you access the TV for the first time.  
3
4
NOTE  
If you do not operate the TV within 40 seconds when the setting menu screen appears, the setting  
menus will disappear.  
Follow the on-screen instructions to customize your TV according to your preferences.  
Selects a language for the display.  
Language  
Mode Setting  
Selects Home Use for the home environment.  
Selects the Standby Light. If you select On, the TV turns on the Standby Light in  
the front panel when the TV is off.  
Power Indicator  
Country  
Selects a country to display.  
Selects the time zone and daylight saving.  
(When Russia is selected for Country)  
Time Zone  
(If there is LAN port) selects Network Setting to display. (M**52T models (Only  
UK))  
Network Setting  
Set the password.  
(When France/Italy is selected for Country)  
Set Password  
User Guide and FAQ  
Shows how to use User Guide and FAQ.  
Auto Tuning  
Scans and saves available programmes automatically.  
WATCHING TV  
22  
NOTE  
For those countries without confirmed DTV broadcasting standards, some DTV features might not  
yy  
work, depending on the DTV broadcasting environment.  
When France is selected for Country, the initial password is not ‘0, ‘0, ‘0, ‘0’ but ‘1, ‘2, ‘3, ‘4.  
yy  
To display images in the best quality for your home environment, select Home Use mode.  
yy  
Store Demo mode is suitable for the retail environment.  
yy  
If you select Store Demo mode, the previously customized settings will switch to the default  
yy  
settings of Store Demo mode in 2 minutes.  
When the basic settings are complete, press OK.  
5
6
NOTE  
If you do not complete the initial setting, it will appear whenever you access the TV.  
To turn the TV off, press  
on the TV.  
The Standby Light is turned on.  
CAUTION  
Disconnect the power cord from the power outlet when you do not use the TV for a long period of  
time.  
NOTE  
You can also switch the TV from PC mode to TV mode, press TV/PC.  
yy  
You can also access Factory Reset by accessing OPTION in the main menus.  
yy  
MAKING CONNECTIONS  
23  
MAKING CONNECTIONS  
Connect various external devices to the TV and switch input modes to select an external device. For more  
information about an external device’s connection, refer to the manual supplied with each device.  
Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC,  
camcorders or cameras, gaming devices, and other external devices.  
NOTE  
If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input  
yy  
cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the  
manual supplied with the connected device.  
The external device connection may differ from the model.  
yy  
Connect external devices to the TV regardless of the order of the TV port.  
yy  
Connecting an antenna  
Connect an antenna, cable or cable box to watch TV referring to the following. The illustrations may differ  
from the actual accessories and an RF cable is optional.  
Connect the TV to a wall antenna socket with an RF cable (75 Ω).  
(Not Provided)  
Outdoor Antenna  
VHF Antenna  
yy  
yy  
UHF Antenna  
Wall Antenna Socket  
NOTE  
CAUTION  
Use a signal splitter to use more than 2 TVs.  
yy  
Make sure not to bend the copper wire of  
yy  
the RF cable.  
If the image quality is poor, install a signal  
yy  
amplifier properly to improve the image  
quality.  
If the image quality is poor with an antenna  
yy  
Copper wire  
connected, aim the antenna to the proper  
direction.  
Complete all connections instructions  
yy  
Visit http://AntennaWeb.org for more  
yy  
between devices, and then connect the  
power cord to the power outlet to prevent  
damages to your TV.  
information about the antenna and cable  
connection.  
 
MAKING CONNECTIONS  
24  
Connecting to a HD receiver, DVD, VCR player or Gaming device  
Connect a HD receiver, DVD, VCR player or Gaming device to the TV and select an appropriate input mode.  
HDMI connection  
HDMI is the best way to connect a device.  
Transmits the digital video and audio signals from an external device to the TV. Connect the external device  
and the TV with the HDMI cable as shown on the following illustration.  
NOTE  
Use a High Speed HDMI™ Cable.  
yy  
High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.  
yy  
Supported DTV Audio: MPEG, Dolby Digital.  
yy  
Supported HDMI Audio format: Dolby Digital, PCM (Up to 192 kHz, 32 kHz / 44.1 kHz / 48 kHz /  
yy  
88 kHz / 96 kHz / 176 kHz / 192 kHz, DTS Not supported.)  
Choose any HDMI input port to connect.  
yy  
It does not matter which port you use.  
yy  
(Not Provided)  
DVD / Blu-Ray / HD Cable Box / HD STB / Gaming device  
MAKING CONNECTIONS  
25  
HDMI to DVI connection  
Transmits the digital video signal from an external device to the TV. Connect the external device and the TV  
with the HDMI to DVI cable as shown in the following illustration. To transmit an audio signal, connect an  
optional audio cable.  
NOTE  
If you do not use an optional external speaker, connect the external device to the TV with the optional  
audio cable.  
(Not Provided)  
(Not Provided)  
DVD / Blu-Ray / HD Cable Box /  
HD STB / Gaming device  
MAKING CONNECTIONS  
26  
Component connection  
Transmits the analog video and audio signals from an external device to the TV. Connect the external  
device and the TV with the component cable as shown on the following illustration. To display images by  
using progressive scan, make sure to use the component cable.  
NOTE  
If cables are installed incorrectly, it could case the image to display in black and white or with distorted  
yy  
color.  
Check to ensure the cable are matched with the corresponding color connection.  
yy  
(Not Provided)  
(Not Provided)  
DVD / Blu-Ray / HD Cable Box /  
HD STB / Gaming device  
MAKING CONNECTIONS  
27  
Composite connection  
Transmits the analog video and audio signals from an external device to the TV. Connect the external  
device and the TV with the composite cable as shown on the following illustration.  
NOTE  
Check to ensure the cable are matched with the corresponding color connection.  
(Not Provided)  
DVD / Blu-Ray / HD Cable Box /  
HD STB / Gaming device  
MAKING CONNECTIONS  
28  
Euro Scart connection  
Transmits the video and audio signals from an external device to the TV. Connect the external device  
and the TV with the Euro Scart cable as shown on the following illustration. To display images by using  
progressive scan, make sure to use the Euro Scart cable.  
Output Type AV1 (TV Out1)  
AV1 (When DTV scheduled recording is in progress using  
recording equipment.)  
Current  
input mode  
Digital TV  
Digital TV  
O
Analogue TV,  
AV  
Analogue TV  
O (The input mode is converted to DTV.)  
Component/  
RGB  
HDMI  
NOTE  
Any Euro scart cable used must be signal shielded.  
yy  
When watching digital TV in 3D imaging mode, TV out signals cannot be output through the SCART  
yy  
cable.  
If you set the 3D mode to On while a scheduled recording is performed on digital TV, monitor out  
yy  
signals cannot be output through the SCART cable, and the recording cannot be performed.  
(Not Provided)  
DVD / Blu-Ray / HD Cable Box  
MAKING CONNECTIONS  
29  
Connecting to an audio system  
Use an optional external audio system instead of the built-in speaker.  
Headphone connection  
Transmits the headphone signal from the TV to an external device. Connect the TV with the headphone as  
shown on the following illustration.  
NOTE  
AUDIO menu items are disabled when connecting a headphone.  
yy  
When changing AV MODE with a headphone connected, the change is applied to video but not to  
yy  
audio.  
Optical digital audio out is not available when connecting a headphone.  
yy  
Headphone impedance: 16  
yy  
Max audio output of headphone: 10 mW to 15 mW  
yy  
Headphone jack size: 0.35 cm  
yy  
(Not Provided)  
Headphone  
MAKING CONNECTIONS  
30  
Connecting to a USB  
Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player or a USB  
memory card reader to the TV and access the USB menu to use various multimedia files.  
or  
USB  
(Not Provided)  
Connecting to a CI Module  
View the encrypted (pay) services in digital TV mode. This feature is not available in all countries.  
NOTE  
Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not  
inserted properly, this can cause damage to the TV and the PCMCIA card slot.  
(Not Provided)  
PCMCIA Card  
MAKING CONNECTIONS  
31  
Connecting to a wired network  
M**52T models(Only UK)  
Connect the TV to a local area network (LAN) via the LAN port as shown on the following illustration  
and set up the network settings. After making a physical connection, a small number of home networks  
may require the TV network settings to be adjusted. For most home networks, the TV will connect to  
automatically without any adjustments.  
For detail information, contact your internet provider or router manual.  
CAUTION  
Do not connect a modular phone cable to the LAN port.  
yy  
Since there are various connection methods, please follow the specifications of your  
yy  
telecommunication carrier or internet service provider.  
NOTE  
[M**52T Model]  
U.K: LAN port is available. (The LAN port is added to support HD MHEG.)  
yy  
Other areas: LAN port is not available.  
yy  
MAKING CONNECTIONS  
32  
Connecting to a PC  
Your TV supports the Plug & Play* feature and has the built-in speakers with Infinite Surround that  
reproduces sound clearly with a rich bass.  
* Plug & Play: The function when a PC recognizes a connected device that users connect to a PC and turn  
on, without device configuration or user intervention.  
NOTE  
It is recommended to use the TV with the HDMI connection for the best image quality.  
yy  
If you do not use an optional external speaker, connect the PC to the TV with the optional audio  
yy  
cable.  
If you turn the TV on when the set becomes cold, the screen may flicker. This is normal.  
yy  
Use a shielded signal interface cable, such as D-sub 15 pin signal cable and HDMI to DVI cable, with  
yy  
a ferrite core to maintain standard compliance for the product.  
Some red, green, or blue spots may appear on the screen. This is normal.  
yy  
Connect the signal input cable and tighten it by turning the screws clockwise.  
yy  
Do not press the screen with your finger for a long time as this may result in temporary  
yy  
distortion on the screen.  
Avoid displaying a fixed image on the screen for a long period of time to prevent image  
yy  
burn. Use a screensaver if possible.  
NOTE  
If you want to use HDMI-PC mode, you must set the input label to PC mode.  
yy  
The OSD (On Screen Display) is displayed on the screen as shown below.  
yy  
» When turning the product on in HDMI input.  
» When switching to HDMI input.  
Is the input connected to your PC?  
Yes  
No  
Do not show message again.  
If you select "Yes" the size and image quality are optimised for your PC.  
yy  
If you select "No" the size and image quality are optimised for the AV device (DVD player, set-top  
yy  
box, gaming device).  
If you select "Do not show message again" this message does not appear until the TV is reset. You  
yy  
can change the set value in SETTINGS s INPUT s Input Label.  
The values set for HDMI1/HDMI2 are saved independently.  
yy  
MAKING CONNECTIONS  
33  
HDMI connection  
Transmits the digital video and audio signals from your PC to the TV. Connect the PC and the TV with the  
HDMI cable as shown in the following illustrations. You should set PC as an input label to connect the PC to  
the TV with an HDMI connection.  
NOTE  
Use a High Speed HDMI™ Cable.  
yy  
High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.  
yy  
If you want to use HDMI-PC mode, you must set the input label to PC mode.  
yy  
Supported DTV Audio: MPEG, Dolby Digital.  
yy  
Supported HDMI Audio format: Dolby Digital, PCM (Up to 192 kHz, 32 kHz / 44.1 kHz / 48 kHz /  
yy  
88 kHz / 96 kHz / 176 kHz / 192 kHz, DTS Not supported.)  
Choose any HDMI input port to connect.  
yy  
It does not matter which port you use.  
yy  
(Not Provided)  
PC  
MAKING CONNECTIONS  
34  
HDMI to DVI connection  
Transmits the digital video signal from your PC to the TV. Connect the PC and the TV with the HDMI to DVI  
cable as shown the following illustrations. To transmit an audio signal, connect an optional audio cable.  
NOTE  
If you want to use HDMI-PC mode, you must set the input label to PC or DVI mode.  
yy  
If you do not use an optional external speaker, connect the PC to the TV with the optional audio cable.  
yy  
(Not Provided)  
(Not Provided)  
PC  
MAKING CONNECTIONS  
35  
RGB connection  
Transmits the analog video signal from your PC to the TV. Connect the PC and the TV with the D-sub 15  
pin cable as shown the following illustrations. To transmit an audio signal, connect an optional audio cable.  
NOTE  
If you do not use an optional external speaker, connect the PC to the TV with the optional audio cable.  
(Not Provided)  
PC  
 
REMOTE CONTROL  
36  
REMOTE CONTROL  
M2252D M2352D M2452D M2752D M2252T M2352T M2452T M2752T  
The descriptions in this manual are based on the buttons of the remote control. Please read this manual  
carefully and use the TV correctly.  
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching  
label inside the compartment, and close the battery cover.  
and  
ends to the  
To remove the batteries, perform the installation actions in reverse.  
CAUTION  
Do not mix old and new batteries, as this may  
damage the remote control.  
Make sure to point the remote control to the remote control sensor on the TV.  
Image shown may differ from your TV.  
(POWER)  
Turns the TV on or off.  
TV/RAD  
Selects Radio, TV and DTV  
programme.  
(User Guide) (See p.40)  
Accesses the User Guide  
menu.  
RATIO  
Resizes an image.  
GUIDE  
Shows programme guide.  
INPUT  
Selects the input mode.  
INFO  
Views the information of the  
currently program and the  
screen.  
Number buttons  
Enters numbers.  
Q.VIEW  
Returns to the previously  
viewed programme.  
LIST  
Displays the programme  
table.  
SETTINGS  
Accesses the main menus  
or saves your input and exit  
menus.  
Q.MENU  
Accesses the quick menus.  
Navigation buttons  
Scrolls through menus or  
options.  
OK  
Selects menus or options and  
confirms your input.  
(BACK)  
Allows the user to move  
return one step in an  
interactive application, EPG  
or other user interaction  
function.  
EXIT  
Clears all on-screen displays  
and returns to TV viewing from  
any menu.  
 
REMOTE CONTROL  
37  
DM2352D DM2752D DM2352T DM2752T  
The descriptions in this manual are based on the buttons of the remote control. Please read this manual  
carefully and use the TV correctly.  
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching  
label inside the compartment, and close the battery cover.  
and  
ends to the  
To remove the batteries, perform the installation actions in reverse.  
CAUTION  
Do not mix old and new batteries, as this may  
damage the remote control.  
Make sure to point the remote control to the remote control sensor on the TV.  
Image shown may differ from your TV.  
(POWER)  
Turns the TV on or off.  
TV/RAD  
Selects Radio, TV and DTV  
programme.  
3D  
Uses for viewing 3D video.  
RATIO  
Resizes an image.  
GUIDE  
Shows programme guide.  
INPUT  
Selects the input mode.  
INFO  
Views the information of the  
currently program and the  
screen.  
Number buttons  
Enters numbers.  
Q.VIEW  
Returns to the previously  
viewed programme.  
LIST  
Displays the programme  
table.  
SETTINGS  
Accesses the main menus  
or saves your input and exit  
menus.  
Q.MENU  
Accesses the quick menus.  
3D OPTION(Only 3D Mode)  
View for 3D Mode setting.  
OK  
Selects menus or options  
and confirms your input.  
Navigation buttons  
Scrolls through menus or  
options.  
(BACK)  
Allows the user to move  
return one step in an  
interactive application, EPG  
or other user interaction  
function.  
EXIT  
Clears all on-screen displays  
and returns to TV viewing from  
any menu.  
 
REMOTE CONTROL  
38  
M2252D M2352D M2452D M2752D M2252T M2352T M2452T M2752T  
DM2352D DM2752D DM2352T DM2752T  
FAV  
Displays the selected  
favourite programme.  
AD  
Programme  
Switches the Audio  
Description On or Off.  
PIP  
Selects a programme.  
PAGE  
Moves to the previous or next  
screen.  
Turns the PIP mode on or off.  
(
VOLUME)  
Adjusts the volume level.  
MUTE  
Mutes all sounds.  
Backlight  
Adjusts the brightness of  
the screen by controlling the  
screen backlight.  
Coloured buttons  
These buttons are used for  
teletext (on TELETEXT  
models only), Programme  
edit.  
SUBTITLE  
Recalls your preferred subtitle  
in digital mode.  
USB Menu control  
buttons  
USB menu(Photo List and  
Music List or Movie List).  
Teletext buttons  
These buttons are used for  
teletext. For further details,  
see the ‘Teletext’ section.  
NOTE  
On MHEG channel, you cannot adjust the backlight with the yellow or blue key.  
 
CUSTOMIZING SETTINGS  
39  
CUSTOMIZING SETTINGS  
Accessing main menus  
Press SETTINGS to access the main menus.  
1
Press the Navigation buttons to scroll to one of the following menus and press OK.  
Press the Navigation buttons to scroll to the setting or option you want and press OK.  
When you are finished, press EXIT.  
2
3
4
When you return to the previous menu, press  
(BACK).  
PICTURE  
AUDIO  
SETUP  
TIME  
Adjusts the image size, quality or effect.  
Adjusts the sound quality, effect or volume level.  
Sets up and edit programmes.  
Sets the time, date or Timer feature.  
LOCK  
OPTION  
INPUT  
Locks or unlocks channels and programs.  
Customizes the general settings.  
Views the input sources with their labels. (Only M**52D / DM**52D model)  
Sets the network. (M**52T models (Only UK))  
Using integrated media feature.  
NETWORK  
MY MEDIA  
Press RED button to access the Customer Support menus.  
yy  
Press GREEN Button to access the FAQ menus.  
yy  
Press OK( ) to set programme settings.  
Customer Support  
Exit  
FAQ  
FAQ  
Customer Support  
Using Customer Support feature.  
Shows answers to frequently asked  
questions about TV viewing and sets  
the related menus.  
Software Update  
yy  
Picture Test  
yy  
Sound Test  
yy  
Signal Test  
yy  
Product/Service Info.  
yy  
Network Test (M**52T models (Only UK))  
yy  
User Guide  
yy  
USING THE USER GUIDE  
40  
USING THE USER GUIDE  
Image shown may differ from your TV.  
yy  
Accessing User Guide menu.  
3
User Guide  
2
Using the TV menu  
To use input device  
To use Energy Saving feature  
Press SETTINGS to access the main menus.  
1
PROGRAMME Setting  
To use SUPER Energy Saving feature  
To set time options  
PICTURE, SOUND Setting  
OPTION  
Press the RED button to access the Customer  
Support menus.  
2
To set TV lock options  
Advanced Function  
Information  
To set language  
To set country  
Press the Navigation button to scroll to User  
Guide and press OK.  
3
4
5
1
Press the Navigation buttons to scroll to the  
option you want and press OK.  
Allows to select the category you want.  
1
2
Allows to select the item you want.  
When you are finished, press EXIT.  
When you return to the previous menu, press  
(BACK).  
ꕌ ꕍ  
You can use / to move between pages.  
Allows to browse the description of the  
function you want from the index.  
3
1OPTION > To set language  
User Guide  
Using the Remote Control  
SETTING OPTION Language  
You can select the language of the menu displayed on the screen and the  
digital sound broadcasting.  
yy Menu Language : Selects a language for the display text.  
yy Audio Language [In Digital Mode Only] : Select the desired language  
when watching digital broadcasting containg several  
voice languages.  
(* Except for the 3D model)  
PROGRAMME Setting  
yy Subtitle Language [In Digital Mode Only] : Use the Subtitle function when  
two or more subtitle languages are broadcast.  
If subtitle data in a selected language is not  
broadcast, the default language subtitle will  
be displayed.  
PICTURE, SOUND Setting  
OPTION  
Advanced Function  
Information  
Zoom In  
Close  
2
SETTING OPTION Language  
You can select the language of the menu displayed on the screen and the  
digital sound broadcasting.  
yy Menu Language : Selects a language for the display text.  
yy Audio Language [In Digital Mode Only] : elect the desired language when  
watching digital broadcasting containg several voice  
languages.  
yy Subtitle Language [In Digital Mode Only] : Use the Subtitle function when  
two or more subtitle languages are broadcast.  
Press  
Guide.  
(User Guide) to access the User  
1
If subtitle data in a selected language is not broad-  
cast, the default language subtitle will be displayed.  
Press the Navigation buttons to scroll to the  
option you want and press OK.  
2
3
Zoom Out  
Close  
2
When you are finished, press EXIT.  
When you return to the previous menu, press  
(BACK).  
1
2
Shows the description of the selected menu.  
ꕌ ꕍ  
You can use / to move between pages.  
Zooms in or out the screen.  
 
3D IMAGING(ONLY CINEMA 3D TV)  
41  
3D IMAGING(ONLY CINEMA 3D TV)  
3D Technology  
This TV can display in 3D via 3D broadcasting or when the TV is connected to a compatible device, such  
as a Blu-ray 3D Player. The viewer must wear compatible 3D glasses in order to see these images in 3D  
format.  
NOTE  
After powering on the TV, a few seconds may be needed for your TV to calibrate.  
yy  
When watching digital TV in 3D imaging mode, TV out signals cannot be output through the SCART  
yy  
cable.  
If you set the 3D mode to On while a scheduled recording is performed on digital TV, TV out signals  
yy  
cannot be output through the SCART cable, and the recording cannot be performed.  
If 3D TV broadcast standard changes in the future and it is not supported by this TV, you may need a  
yy  
separate device, such as a set-top box.  
MAINTENANCE  
42  
MAINTENANCE  
Cleaning Your TV  
Clean your TV regularly to keep the best performance and to extend the product lifespan.  
CAUTION  
Make sure to turn the power off and disconnect the power cord and all other cables first.  
yy  
When the TV is left unattended and unused for a long time, disconnect the power cord from the wall  
yy  
outlet to prevent possible damage from lightning or power surges.  
Screen and frame  
To remove dust, wipe the surface with a dry and soft cloth.  
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild  
detergent. Then wipe immediately with a clean and dry cloth.  
CAUTION  
Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in  
yy  
scratches on the screen and image distortions.  
Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners,  
yy  
lubricants, as these may damage the screen’s finish and cause discolorations.  
Cabinet and stand  
To remove dust, wipe the cabinet with a dry and soft cloth.  
To remove major dirt, wipe the cabinet with a soft cloth dampened in a clean water or water containing a  
small amount of mild detergent.  
CAUTION  
Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or  
yy  
malfunction.  
Do not use any chemicals as this may deteriorate the surface.  
yy  
Power cord  
Remove the accumulated dust or dirt on the power cord regularly.  
MAINTENANCE  
43  
Preventing “Image burn” or “Burn-in” on your TV screen  
If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become  
yy  
a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the  
warranty.  
If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the  
yy  
letterboxed area of the screen.  
Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD)  
yy  
to prevent image burn.  
TROUBLESHOOTING  
44  
TROUBLESHOOTING  
General  
Problem  
Resolution  
Cannot control the TV with  
the remote control.  
Check the remote control sensor on the product and try again.  
Check if there is any obstacle between the product and the remote control.  
Check if the batteries are still working and properly installed ( to  
y
y
y
,
to ).  
No image display and no  
sound is produced.  
Check if the product is turned on.  
Check if the power cord is connected to a wall outlet.  
Check if there is a problem in the wall outlet by connecting other products.  
y
y
y
The TV turns off suddenly.  
Check the power control settings. The power supply may be interrupted.  
Check if the Auto sleep feature is activated in the Time settings.  
If there is no signal while the TV is on, the TV will turn off automatically after  
15 minutes of inactivity.  
y
y
y
Using 3D mode  
Problem  
Resolution  
If you can see a swirling oil-like  
pattern on the TV when the TV is  
turned off.  
This is caused by the interference of external light in the air layer between the  
LCD surface and 3D filter. The pattern becomes almost invisible when you turn  
on the power again.  
If you are not using the glasses  
provided with the TV.  
When you view 3D images with this TV, it is very important that you use the  
glasses provided with the TV. The glasses are designed to compensate optically  
for the 3D filter attached to the surface of the TV. If you wear third-party glasses,  
you may not see 3D images properly on the TV.  
If you view 3D images outside the  
optimal viewing angle or distance.  
The optimal viewing angle of this TV is between 12° degrees; the optimal viewing  
distance is between 50 cm to 150 cm from the TV. When you view 3D images  
outside the optimal viewing angle or viewing distance, the images may look  
overlapped or not be displayed properly in 3D.  
Notes for Viewing 3D Image with 3D Digital Brodcating  
*In Analogue Brodcating, 3D Imaging does not work.  
Problem  
Resolution  
When switching the 2D image  
display to the 3D image display  
with the 3D button on the remote  
control, the overlapped image may  
be displayed.  
Disable the 3D imaging mode with the 3D button.  
The 3D imaging mode is disabled automatically if you change the channel.  
y
y
If the screen is divided into left/right This channel supports the 3D imaging mode. Select the 3D imaging type  
or top/bottom when you change the displayed on the screen by pressing the 3D button on the remote control.  
channel  
If your eyes are sore or the screen  
looks blurry while viewing 3D  
images.  
Select Left/Right or Right/Left option, which you find better for viewing 3D  
images.  
SPECIFICATIONS  
45  
SPECIFICATIONS  
M2252D  
M2252T  
Panel  
Screen Type  
546.1 mm Wide (21.5 inch)  
Visible diagonal size : 546.1 mm  
Pixel Pitch  
0.25 mm (H) x 0.25 mm (V)  
1920 × 1080 @ 60 Hz  
Video Signal  
Max. Resolution  
Recommended Resolution 1920 × 1080 @ 60 Hz  
Horizontal Frequency  
Vertical Frequency  
30 kHz to 83 kHz  
56 Hz to 75 Hz  
Separate Sync, Digital  
M2252D  
Synchronization Type  
Input Connector  
TV, D-Sub Analog, SCART, PC Audio In, Component,  
CVBS, HDMI*2, USB, PCMCIA  
M2252T  
TV, D-Sub Analog, SCART, PC Audio In, Component,  
CVBS, HDMI*2, USB, PCMCIA, LAN JACK (Only UK)  
Power  
Rated Voltage  
19 V  
On Mode : 30 W (typ.)  
Off Mode 0.4 W  
Manufacturer: Lien Chang, Model LCAP25A  
1.6 A  
Power Consumption  
AC/DC Adapter  
Tilt  
Manufacturer: HONOR, Model ADS-40SG-19-2 19032G  
Tilt Range  
-5 to 20°  
Dimensions (Width x Depth x Height)  
Weight  
With Stand  
508.6 mm x 182.8 mm x 386.5 mm  
3.6 kg  
Without Stand  
508.6 mm x 62.9 mm x 314.8 mm  
3.1 kg  
Environmental  
conditions  
Operating Temperature  
Operating Humidity  
10 °C to 35 °C  
20 % to 80 %  
Storage Temperature  
Storage Humidity  
-10 °C to 60 °C  
5 % to 90 %  
Product specifications shown above may be changed without prior notice due to upgrade of product  
functions.  
SPECIFICATIONS  
46  
M2352D M2352T DM2352D DM2352T  
Panel  
Screen Type  
584.2 mm Wide (23 inch)  
Visible diagonal size : 584.2 mm  
Pixel Pitch  
0.27 mm (H) x 0.27 mm (V)  
1920 × 1080 @ 60 Hz  
Video Signal  
Max. Resolution  
Recommended Resolution 1920 × 1080 @ 60 Hz  
Horizontal Frequency  
Vertical Frequency  
30 kHz to 83 kHz  
56 Hz to 75 Hz  
Synchronization Type  
Separate Sync, Digital  
M2352D / DM2352D  
Input Connector  
TV, D-Sub Analog, SCART, PC Audio In, Component,  
CVBS, HDMI*2, USB, PCMCIA  
M2352T / DM2352T  
TV, D-Sub Analog, SCART, PC Audio In, Component,  
CVBS, HDMI*2, USB, PCMCIA, LAN JACK (Only UK)  
Power  
Rated Voltage  
19 V  
2.0 A  
Power Consumption  
On Mode : 33 W (typ.)  
Off Mode 0.4 W  
AC/DC Adapter  
M2352D  
Manufacturer: LITE-ON, Model PA-1650-64  
Manufacturer: LG Innotek, Model PSAB-L101A  
Manufacturer: Lien Chang, Model LCAP25B  
Manufacturer: LG Innotek, Model PSAB-L204B  
M2352T, DM2352D, DM2352T  
Manufacturer: LITE-ON, Model PA-1650-64  
Manufacturer: LG Innotek, Model PSAB-L101A  
Tilt  
Tilt Range  
-5 to 20°  
Dimensions (Width x Depth x Height)  
Weight  
With Stand  
544.1 mm x 182.8 mm x 406.2 mm  
3.9 kg  
Without Stand  
544.1 mm x 62.9 mm x 334.6 mm  
3.4 kg  
Environmental  
conditions  
Operating Temperature  
Operating Humidity  
10 °C to 35 °C  
20 % to 80 %  
Storage Temperature  
Storage Humidity  
-10 °C to 60 °C  
5 % to 90 %  
Product specifications shown above may be changed without prior notice due to upgrade of product  
functions.  
SPECIFICATIONS  
47  
M2452D  
M2452T  
Panel  
Screen Type  
609.6 mm Wide (24 inch)  
Visible diagonal size : 609.6 mm  
Pixel Pitch  
0.28 mm (H) x 0.28 mm (V)  
1920 × 1080 @ 60 Hz  
Video Signal  
Max. Resolution  
Recommended Resolution 1920 × 1080 @ 60 Hz  
Horizontal Frequency  
Vertical Frequency  
30 kHz to 83 kHz  
56 Hz to 75 Hz  
Separate Sync, Digital  
M2452D  
Synchronization Type  
Input Connector  
TV, D-Sub Analog, SCART, PC Audio In, Component,  
CVBS, HDMI*2, USB, PCMCIA  
M2452T  
TV, D-Sub Analog, SCART, PC Audio In, Component,  
CVBS, HDMI*2, USB, PCMCIA, LAN JACK (Only UK)  
Power  
Rated Voltage  
19 V  
2.0 A  
Power Consumption  
On Mode : 33 W (typ.)  
Off Mode 0.4 W  
AC/DC Adapter  
M2452D  
Manufacturer: LITE-ON, Model PA-1650-64  
Manufacturer: LG Innotek, Model PSAB-L101A  
Manufacturer: Lien Chang, Model LCAP25B  
Manufacturer: LG Innotek, Model PSAB-L204B  
M2452T  
Manufacturer: LITE-ON, Model PA-1650-64  
Manufacturer: LG Innotek, Model PSAB-L101A  
Tilt  
Tilt Range  
-5 to 20°  
Dimensions (Width x Depth x Height)  
Weight  
With Stand  
566.9 mm x 182.8 mm x 417.4 mm  
3.4 kg  
Without Stand  
566.9 mm x 62.9 mm x 345.9 mm  
2.9 kg  
Environmental  
conditions  
Operating Temperature  
Operating Humidity  
10 °C to 35 °C  
20 % to 80 %  
Storage Temperature  
Storage Humidity  
-10 °C to 60 °C  
5 % to 90 %  
Product specifications shown above may be changed without prior notice due to upgrade of product  
functions.  
SPECIFICATIONS  
48  
M2752D  
M2752T  
DM2752D  
DM2752T  
Panel  
Screen Type  
Pixel Pitch  
685.65 mm Wide (27 inch)  
Visible diagonal size : 685.65 mm  
0.31 mm (H) x 0.31 mm (V)  
1920 × 1080 @ 60 Hz  
Video Signal  
Max. Resolution  
Recommended Resolution 1920 × 1080 @ 60 Hz  
Horizontal Frequency  
Vertical Frequency  
30 kHz to 83 kHz  
56 Hz to 75 Hz  
Synchronization Type  
Separate Sync, Digital  
M2752D / DM2752D  
Input Connector  
TV, D-Sub Analog, SCART, PC Audio In, Component,  
CVBS, HDMI*2, USB, PCMCIA  
M2752T / DM2752T  
TV, D-Sub Analog, SCART, PC Audio In, Component,  
CVBS, HDMI*2, USB, PCMCIA, LAN JACK (Only UK)  
Power  
Rated Voltage  
19 V  
2.0 A  
Power Consumption  
On Mode : 35 W (typ.)  
Off Mode  
M2752D  
0.4 W  
AC/DC Adapter  
Manufacturer: LITE-ON, Model PA-1650-64  
Manufacturer: LG Innotek, Model PSAB-L101A  
Manufacturer: Lien Chang, Model LCAP25B  
Manufacturer: LG Innotek, Model PSAB-L204B  
M2752T, DM2752D, DM2752T  
Manufacturer: LITE-ON, Model PA-1650-64  
Manufacturer: LG Innotek, Model PSAB-L101A  
Tilt  
Tilt Range  
-5 to 20°  
Dimensions (Width x Depth x Height)  
Weight  
With Stand  
641.3 mm x 199.4 mm x 458.8 mm  
5.55 kg  
Without Stand  
641.3 mm x 53 mm x 391.1 mm  
4.6 kg  
Environmental  
conditions  
Operating Temperature  
Operating Humidity  
10 °C to 35 °C  
20 % to 80 %  
Storage Temperature  
Storage Humidity  
-10 °C to 60 °C  
5 % to 90 %  
Product specifications shown above may be changed without prior notice due to upgrade of product  
functions.  
SPECIFICATIONS  
Vertical  
49  
Component supported mode  
RGB (PC) / HDMI (PC) supported mode  
Horizontal  
Resolution  
Horizontal  
Vertical  
Resolution  
Frequency(kHz) Frequency(Hz)  
Frequency(kHz) Frequency(Hz)  
720 x 480  
720 x 480  
720 x 576  
15.730  
15.750  
15.625  
31.470  
31.500  
31.250  
44.960  
45.000  
37.500  
33.720  
33.750  
28.125  
56.250  
67.432  
67.500  
59.940  
60.000  
50.000  
59.940  
60.000  
50.000  
59.940  
60.000  
50.000  
59.940  
60.000  
50.000  
50.000  
59.940  
60.000  
720 x 400  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
1024 x 768  
1024 x 768  
1152 x 864  
1280 x 720  
1280 x 800  
1280 x 1024  
1280 x 1024  
1400 x 1050  
1440 x 900  
1600 x 900  
1680 x 1050  
1680 x 1050  
1920 x 1080  
31.468  
31.469  
37.500  
37.879  
46.875  
48.363  
60.023  
67.500  
45.000  
49.702  
63.981  
79.976  
65.317  
55.935  
60.000  
64.674  
65.290  
67.500  
70.080  
59.940  
75.000  
60.317  
75.000  
60.004  
75.029  
75.000  
60.000  
59.810  
60.020  
75.025  
59.978  
59.887  
60.000  
59.883  
59.954  
60.000  
720 x 480  
720 x 480  
720 x 576  
1280 x 720  
1280 x 720  
1280 x 720  
1920 x 1080  
1920 x 1080  
1920 x 1080  
1920 x 1080  
1920 x 1080  
1920 x 1080  
HDMI (DTV) supported mode  
Component port connecting information  
Horizontal  
Resolution  
Vertical  
Frequency(kHz)  
Frequency(Hz)  
Component ports on the  
Y
PB  
PR  
PR  
TV  
720 x 480  
31.469  
31.500  
59.940  
60.000  
Y
Y
Y
Y
PB  
B-Y  
Cb  
Pb  
720 x 576  
1280 x 720  
1280 x 720  
31.250  
37.500  
50.000  
50.000  
R-Y  
Cr  
Video output ports  
on DVD player  
44.960  
45.000  
59.940  
60.000  
Pr  
1920 x 1080  
33.720  
33.750  
59.940  
60.000  
1920 x 1080  
1920 x 1080  
1920 x 1080  
1920 x 1080  
1920 x 1080  
28.125  
27.000  
33.750  
56.250  
50.000  
24.000  
30.000  
50.000  
67.430  
67.500  
59.940  
60.000  
SPECIFICATIONS  
50  
NOTE  
Avoid keeping a fixed image on the set’s screen for prolonged periods of time. The fixed image may  
yy  
become permanently imprinted on the screen. Use a screen saver when possible.  
There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode.  
yy  
Change the PC mode to another resolution or change the refresh rate to another rate or adjust the  
brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic  
card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic  
card.  
The synchronization input waveform for Horizontal and Vertical frequencies are separate.  
yy  
Connect the signal cable from the TV output port of the PC to the RGB (PC) port of the TV or the  
yy  
signal cable from the HDMI output port of the PC to the HDMI/DVI IN port on the TV.  
Connect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included  
yy  
with the TV).  
If using a sound card, adjust PC sound as required.  
yy  
If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only  
yy  
one of either RGB or HDMI/DVI IN to display the PC output on the TV.  
If the graphic card on the PC does output analogue and digital RGB simultaneously, set the TV to  
yy  
either RGB or HDMI. (The other mode is set to Plug and Play automatically by the TV.)  
DOS mode may not work depending on the video card if you use an HDMI to DVI cable.  
yy  
If you use too long an RGB-PC cable that is too long, there may be interference on the screen. We  
yy  
recommend using under 5 m of cable. This provides the best picture quality.  
3D video input format supported. (Only CINEMA 3D TV)  
Signal  
Resolution  
Horizontal Vertical  
Playable 3D video format  
Frequency Frequency  
(kHz)  
(Hz)  
720p  
1280 x 720  
89.9  
90  
59.94  
60  
Frame Packing  
45  
60  
Side by Side(half), Top & Bottom  
1080i  
1920 x 1080 33.7  
60  
Side by Side(half), Top & Bottom  
Frame packing  
1080p  
1920 x 1080 53.95  
54  
23.98  
24  
HDMI  
67.5  
60  
Side by Side, Top & Bottom,  
Single Frame Sequential  
27  
33.7  
24  
30  
60  
30  
Side by Side(half), Top & Bottom  
Side by Side(half), Top &Bottom  
Side by Side, Top & Bottom  
RGB  
USB  
1080p  
1080p  
Signal  
1920 x 1080 67.5  
1920 x 1080 33.75  
Side by Side, Top & Bottom, MPO(Photo), JPS(Photo)  
Playable 3D video format  
DTV  
720p, 1080i  
Side by Side, Top & Bottom  
NOTE  
If HDMI input is received in HDMI 3D format, images are automatically converted into 3D.  
yy  
2D 3D mode is available to watch for all signals.  
yy  
If you change 2D 3D mode, the left and right edges of the screen are clipped.  
yy  
If you select HDMI 3D, 3D mode is automatically enabled, which may cause the delay of screen  
yy  
turning on.  
For some 3D content files, if a 3D file is converted into 2D, the left and right edges of the screen may  
yy  
appear truncated.  
To obtain the source code under GPL, LGPL,  
MPL and other open source licenses, that is  
contained in this product, please visit http://  
opensource.lge.com.  
In addition to the source code, all referred  
license terms, warranty disclaimers and  
copyright notices are available for download.  
LG Electronics will also provide open source  
code to you on CD-ROM for a charge covering  
the cost of performing such distribution (such  
as the cost of media, shipping and handling)  
upon email request to [email protected].  
This offer is valid for three (3) years from the  
date on which you purchased the product.  
Make sure to read the Safety Precautions  
before using the product.  
Keep the Owner’s Manual (CD) in an  
accessible place for future reference.  
The model and serial number of the TV is  
located on the back and one side of the  
TV. Record it below should you ever need  
service.  
MODEL  
SERIAL  

Vector Start It Ab121903 User Manual
Toyota 712578 User Manual
Sanyo Ch3082 User Manual
Samsung Uq24a1 2 Rc User Manual
Omega Engineering Bridgesensor Dmd 466 User Manual
LG AP C1AV55 User Manual
DELL VOSTRO 5502 02 User Manual
BLONDER TONGUE AMCM 860 User Manual
ASUS ZENWATCH 3 WI503Q User Manual
ASUS X550L User Manual