LG DF22BV2SR User Manual

OWNER'S MANUAL  
DRYER  
Read this owner’s manual thoroughly before operating the appliance and keep it  
handy for reference at all times.  
ENGLISH  
DF22BV2SR, DF22BV2SGR  
DF22VV2SR, DF22VV2SGR  
DF22WV2SR, DF20WV2R  
DF22WV2BR, DF22VV2R  
MFL70442661  
Rev.01_110521  
Copyright © 2021 LG Electronics Inc. All Rights Reserved.  
PRODUCT FEATURES  
3
PRODUCT FEATURES  
Easy-to-Use Control Panel  
Rotate the cycle selector knob to select the desired dry cycle. Add cycle options or adjust settings with the  
touch of a button.  
Easy-Access Reversible Door  
The wide-opening door provides easy access for loading and unloading. The door hinge can be reversed to  
adjust for installation location.  
Steam Functions (Steam Models)  
LG’s steam technology allows you to inject fabrics with a swirling jet of hot steam to refresh clothes, reduce  
static, and make ironing easier. Simply select the Steam Fresh™ cycle, or you can add a Steam option to  
selected cycles.  
Flow Sense™ Duct Blockage Sensing System Indicator  
The Flow Sense™ duct blockage sensing system detects and alerts you to restrictions in the installed  
household ductwork that reduce exhaust airflow through the dryer. If you see the alert: Clean or repair the  
ducts to remove the restrictions. Keep your ducts clean to help increase efficiency and reduce long drying  
times caused by blocked ducts.  
Smart Diagnosis™  
Should you experience any technical difficulty with your dryer, it has the capability of transmitting data via your  
telephone to the Customer Information Center. The call center agent records the data transmitted from your  
machine and uses it to analyze the issue, providing a fast and effective diagnosis.  
LG ThinQ  
Download the new LG smart phone app to set options, self-diagnose and troubleshoot problems with the  
appliance, and other useful features. This function uses Wi-Fi.  
4
SAFETY INSTRUCTIONS  
SAFETY INSTRUCTIONS  
READ ALL INSTRUCTIONS BEFORE USE  
Your safety and the safety of others are very important.  
We have provided many important safety messages in this manual and on your appliance. Always read and  
follow all safety messages.  
This is the safety alert symbol.  
This symbol alerts you to potential hazards that can kill or injure you and others.  
All safety messages will follow the safety alert symbol and either the word WARNING or CAUTION.  
These words mean:  
WARNING  
You may be killed or seriously injured if you do not follow instructions.  
CAUTION  
You may be slightly injured or cause damage to the product if you do not follow instructions.  
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and  
tell you what may happen if the instructions are not followed.  
WARNING- Risk of Fire  
Install the clothes dryer according to the manufacturer’s instructions and local codes.  
Clothes dryer installation must be performed by a qualified installer.  
Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is installed,  
it must be of a specific type identified by the appliance manufacturer as suitable for use with clothes dryers.  
Flexible venting materials are known to collapse, be easily crushed, and trap lint. These conditions will obstruct  
clothes dryer airflow and increase the risk of fire.  
To reduce the risk of severe injury or death, follow all installation instructions.  
Save these instructions.  
WARNING  
FIRE OR EXPLOSION HAZARD  
Failure to follow safety warnings exactly could result in serious injury, death or property damage.  
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other  
appliance.  
WHAT TO DO IF YOU SMELL GAS  
- Do not try to light any appliance.  
- Do not touch any electrical switch; do not use any phone in your building.  
- Clear the room, building or area of all occupants.  
- Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.  
- If you cannot reach your gas supplier, call the fire department.  
Installation and service must be performed by a qualified installer, service agency or your gas supplier.  
SAFETY INSTRUCTIONS  
5
IMPORTANT SAFETY INSTRUCTIONS  
WARNING  
To reduce the risk of explosion, fire, death, electric shock, scalding or injury  
to persons when using this product, follow basic precautions, including the  
following:  
INSTALLATION  
Before use, the appliance must be properly installed as described in this manual.  
Connect to a properly rated, protected, and sized power circuit to avoid electrical overload.  
To reduce the risk of severe injury or death, follow all installation instructions.  
The appliance must be installed and electrically grounded by qualified service personnel in accordance with  
local codes.  
Disconnect the power cord, house fuse or circuit breaker before installing or servicing the appliance.  
When moving or installing the product in a different location, call qualified service personnel for installation  
and service.  
Keep packing materials out of the reach of children. Packaging material can be dangerous for children.  
There is a risk of suffocation.  
Moving or installation of the appliance requires two or more people.  
This appliance is not designed for maritime use or for mobile installations such as in RVs, trailers, or aircraft.  
Store and install the appliance where it will not be exposed to temperatures below freezing or exposed to  
outdoor weather conditions.  
This appliance must be positioned near to an electrical power supply.  
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.  
When installing or moving the appliance, be careful not to pinch, crush, or damage the power cord.  
Do not install the appliance in humid spaces.  
Destroy the carton, plastic bag, and other packing materials after the appliance is unpacked. Children might  
use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers.  
Adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety  
glasses.  
Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has  
missing or broken parts, including a damaged cord or plug.  
Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is  
installed, it must be of a specific type identified by the appliance manufacturer as suitable for use with  
clothes dryers. Flexible venting materials are known to collapse, be easily crushed, and trap lint. These  
conditions will obstruct clothes dryer airflow and increase the risk of fire.  
6
SAFETY INSTRUCTIONS  
Place the dryer at least 18 inches above the floor for a garage installation.  
Do not use sheet metal screws or other fasteners which extend into the duct that could catch lint and reduce  
the efficiency of the exhaust system. Secure all joints with duct tape.  
Use only rigid, semi-rigid or flexible metal 4-inch diameter duct inside the dryer cabinet or for exhausting to  
the outside. Use of plastic or other combustible ductwork may cause a fire. Punctured ductwork may cause  
a fire if it collapses or becomes otherwise restricted in use or during installation.  
The exhaust duct must be 4 inches (10.2 cm) in diameter with no obstructions. The exhaust duct should be  
kept as short as possible. Make sure to clean any old ducts before installing your new dryer.  
Rigid, semi-rigid or flexible metal ducting is recommended for use between the dryer and the wall. All non-  
rigid metal transition duct must be UL-listed. Use of other materials for transition duct could affect drying  
time.  
Ductwork is not provided with the dryer, and you should obtain the necessary ductwork locally. The end cap  
should have hinged dampers to prevent backdraft when the dryer is not in use.  
Gas dryers MUST be exhausted to the outside.  
The dryer exhaust system must be exhausted to the outside of the dwelling. If the dryer is not exhausted  
outdoors, some fine lint and large amounts of moisture will be expelled into the laundry area. An  
accumulation of lint in any area of the home may create a health and fire hazard.  
Do not install near another heat source such as a stove, oven or heater.  
Keep area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint,  
dust, and dirt.  
The appliance must not be supplied through an external switching device, such as a timer, or connected to  
a circuit that is regularly switched on and off by a utility.  
OPERATION  
If the power cord is damaged, it must be repaired by the manufacturer or its authorized service agent. Do  
not use a cord that shows cracks or abrasion damage along its length or at either end.  
If you detect a strange sound, a chemical or burning smell, or smoke coming from the appliance, unplug it  
immediately, and contact an LG Electronics customer information center.  
Never unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull straight out  
from the outlet.  
Do not use an extension cord or adapter with this appliance.  
Do not grasp the power cord or touch the appliance controls with wet hands.  
Do not modify or extend the power cord.  
If the product has been submerged, contact an LG Electronics customer information center for instructions  
before resuming use.  
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other  
appliance.  
Keep the area underneath and around your appliances free of combustible materials (lint, paper, rags, etc.),  
gasoline, chemicals and other flammable vapors and liquids.  
This appliance is not intended for use by persons (including children) with reduced physical, sensory or  
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or  
instruction concerning the use of the appliance by a person responsible for their safety.  
SAFETY INSTRUCTIONS  
7
Read all instructions before using the appliance and save these instructions.  
Use this appliance only for its intended purpose.  
Do not abuse, sit on, or stand on the door of the appliance.  
Do not allow children to play on, in or with the appliance. Close supervision of children is necessary when  
the appliance is used near children.  
Do not tamper with controls.  
In the event of a gas leak (propane gas, LP gas, etc.) do not operate this or any other appliance. Open a  
window or door to ventilate the area immediately.  
Under certain conditions, hydrogen gas may be produced in a hot-water system that has not been used  
for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been used for  
such a period, before using the appliance turn on all hot water faucets and let the water flow from each for  
several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or  
use an open flame during this time.  
Fix the drain hose securely in place.  
Do not put oily or greasy clothing, candles or flammable materials on top of the appliance.  
Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the  
fabric softener or product.  
Do not reach into the appliance if the drum is moving.  
Do not dry articles that have been previously cleaned in, washed in, soaked in, soiled with or spotted with  
gasoline, dry cleaning solvents, vegetable oil, cooking oil or other flammable or explosive substances, as  
they give off vapors that could ignite or explode.  
Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials.  
Do not store plastic, paper, or clothing that may burn or melt on top of the dryer during operation.  
Always check the inside of the appliance for foreign objects.  
Gas appliances can cause minor exposure to four potentially hazardous substances, namely benzene,  
carbon monoxide, formaldehyde, and soot, caused primarily by the incomplete combustion of natural gas or  
LP fuels.  
Properly adjusted dryers will minimize incomplete combustion. Exposure to these substances can be  
minimized further by properly venting the dryer to the outdoors.  
Do not place items exposed to cooking oils in your dryer. Items contaminated with cooking oils may  
contribute to a chemical reaction that could cause a load to catch fire.  
To reduce the risk of fire due to contaminated loads, the final part of a tumble dryer cycle occurs without  
heat (cool down period). Avoid stopping a tumble dryer before the end of the drying cycle unless all items  
are quickly removed and spread out so that the heat is dissipated.  
Do not let children or pets climb inside the dryer drum.  
Do not put living animals such as pets inside the product.  
Do not put any part of your body, such as your hands or feet, or metal objects under the product.  
Do not let your hand get pinched when opening or closing the dryer door.  
This appliance is intended to be used in household only.  
Do not dry unwashed items in the appliance.  
STEAM (Steam Models)  
Do not open the dryer door during steam cycles.  
Do not touch the steam nozzle in the drum during or after a steam cycle.  
8
SAFETY INSTRUCTIONS  
MAINTENANCE  
Do not repair or replace any part of the appliance. All repairs and servicing must be performed by qualified  
service personnel unless specifically recommended in this Owner’s Manual. Use only authorized factory  
parts.  
Do not disassemble or repair the appliance by yourself.  
Remove any dust or foreign matter from the power plug pins.  
Disconnect this appliance from the power supply before cleaning and attempting any user maintenance.  
Turning the controls to the OFF position does not disconnect this appliance from the power supply.  
Remove the door before the appliance is removed from service or discarded to avoid the danger of children  
or small animals getting trapped inside.  
Unplug the appliance before cleaning to avoid the risk of electric shock.  
Clean the lint filter before or after each load.  
The interior of the appliance and exhaust duct should be cleaned periodically by qualified service personnel.  
GROUNDING INSTRUCTIONS  
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with  
a qualified electrician or service personnel if you are in doubt whether the appliance is properly grounded.  
Do not modify the plug provided with the appliance; if it will not fit the outlet, have a proper outlet installed by  
a qualified electrician.  
The appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk  
of electric shock by providing a path of least resistance for electric current. The appliance is equipped with  
a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an  
appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.  
This dryer must be plugged into a properly grounded outlet. Electrical shock may result if the dryer is not  
properly grounded. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet  
is properly grounded. Failure to follow these instructions may create an electric shock hazard and/or a fire  
hazard.  
WARNING  
Fire Hazard  
Failure to follow safety warnings exactly could result in serious injury, death or  
property damage.  
Do not install a booster fan in the exhaust duct.  
Install all clothes dryers in accordance with the installation instructions of the manufacturer of the dryer.  
SAVE THESE INSTRUCTIONS  
PRODUCT OVERVIEW  
9
PRODUCT OVERVIEW  
Parts  
Power  
Cord  
(gas  
Terminal  
Block  
Access  
Panel  
Reversible  
door  
Control  
models)  
panel  
(electric  
models)  
Lint  
filter  
Gas  
Leveling  
connection  
feet  
Exhaust Duct Outlet  
(gas  
models)  
Accessories  
Included Accessories  
Drying Rack  
Inlet Hose-short  
(Steam Models)  
Inlet Hose-Long  
(Steam models)  
Optional Accessories  
Pedestal  
(sold separately)  
Stacking kit  
(sold separately)  
Side vent kit  
(sold separately)  
Kit No. 383EEL9001B  
NOTE  
For your safety and extended product life, use only authorized components. The manufacturer is not  
responsible for product malfunction or accidents caused by the use of unauthorized components or parts.  
The images in this manual may be different from the actual components and accessories which are subject to  
change by the manufacturer without prior notice for product improvement purposes.  
10 INSTALLATION  
INSTALLATION  
Installation Overview  
Please read the following installation instructions first after purchasing this product or transporting it to another location.  
Check and choose the  
proper location  
Level the dryer  
Vent the dryer  
Connect the inlet hose  
(steam models)  
Connect the Gas dryer  
Connect the Electric dryer  
DF22BV2SR, DF22BV2SGR,  
DF22VV2SR, DF22VV2SGR, DF22WV2BR  
DF22WV2SR, DF20WV2R, DF22VV2R  
Gas dryer  
Plug in the power cord  
Electric dryer  
Installation test  
Test run  
Product Specifications  
The appearance and specifications listed in this manual may vary due to constant product improvements.  
DF22WV2SR,  
DF22VV2R  
DF22BV2SR, DF22BV2SGR,  
DF22VV2SR, DF22VV2SGR, DF22WV2BR  
Dryer Models  
Description  
DF20WV2R  
Non-steam Dryer  
Steam Dryer  
Electrical requirements 120 V~ 60 Hz 400 W  
NG: 4 - 10.5-inch (10.2 - 26.7 cm) WC  
LP: 8 - 13-inch (20.4 - 33.1 cm) WC  
Gas requirements  
Dimensions  
27” (W) X 30 1/8” (D) X 39” (H), 51 3/8” (D with door open)  
68.6 cm (W) X 76.5 cm (D) X 99 cm (H), 130.5 cm (D with door open)  
Gas : 136.03 lb (61.7kg) - 139.34 lb (63.2kg)  
Electric : 121.9 lb (55.3kg) - 125.3 lb (56.8kg)  
Net weight  
Steam Cycle  
Normal Cycle  
-
IEC 7.4 cu.ft. (8 lb/3.6 kg)  
IEC 7.4 cu.ft. (24.3 lb/11kg)  
Drying  
capacity  
IEC 7.4 cu.ft.  
(22.5 lb/10.2kg)  
NOTE  
Model numbers can be found on the cabinet inside the door.  
The images in this manual may be different from the actual components and accessories which are  
subject to change by the manufacturer without prior notice for product improvement purposes.  
INSTALLATION 11  
Installation Location Requirements  
WARNING  
Read all installation instructions completely before installing and operating your dryer. It is important that  
you review this entire manual before installing and using your dryer. Detailed instructions concerning  
electrical connections, gas connections, and exhaust requirements are provided on the following pages.  
WARNING  
To reduce the risk of serious injury or death, follow basic precautions, including the following:  
Use long-sleeved gloves and safety glasses.  
The appliance is heavy. Two or more people are required when installing the dryer.  
The installation requires:  
A location that allows for proper exhaust installation. A gas dryer must be exhausted to the outdoors. See  
Venting the Dryer.  
A grounded electrical outlet located within 2 ft. (61 cm) of either side of the dryer. See Connecting Electric  
Dryers.  
A sturdy floor to support the total dryer weight of 200 lb (90.7 kg). The combined weight of a companion  
appliance should also be considered.  
No other fuel-burning appliance can be installed in the same closet as a dryer.  
Additional clearances might be required for wall, door and floor moldings.  
Companion appliance spacing should also be considered.  
NOTE  
The floor must be level, with a maximum slope of 1 inch (2.5 cm) under the entire dryer. Clothes may not  
tumble properly, and automatic sensor cycles may not operate correctly if the dryer is not level.  
For garage installation, you will need to place the dryer at least 18 inches (45.7 cm) above the floor. The  
standard pedestal height is 15 inches (38 cm). You will need 18 inches (45.7 cm) from the garage floor to the  
bottom of the dryer.  
Do not operate your dryer at temperatures below 45 °F (7 °C). At lower temperatures, the dryer might not shut  
off at the end of an automatic cycle. This can result in longer drying times.  
The dryer must not be installed or stored in an area where it will be exposed to water and/or weather.  
Check code requirements that limit, or do not permit, installation of the dryer in garages, mobile homes or  
sleeping quarters. Contact your local building inspector.  
12 INSTALLATION  
Clearances  
14" max.*  
(356 mm)  
14" max.*  
(356 mm)  
18" min.*  
(457 mm)  
18" min.*  
(457 mm)  
1"*  
(25 mm)  
30 - 30  
5"**  
(127 mm)  
1"*  
(25 mm)  
30 - 30  
5"**  
1/8"  
1/8"  
(127 mm)  
(761 - 765mm)  
(761 - 765mm)  
3"  
*
(76 mm)  
2*  
48 in.  
(310 cm2)  
0"  
(0 mm)  
39"  
(990 mm)  
2*  
24 in.  
(155 cm2  
1"  
27"  
(686 mm)  
1"  
)
3"  
*
(25 mm)  
(25 mm)  
(76 mm)  
1"  
(25 mm)  
27"  
1"  
(686 mm)  
(25 mm)  
Closet Door  
Vent Requirements  
Installation Spacing for Recessed Area or Closet Installation  
The following clearances are recommended for this dryer. This dryer has been tested for clearances of 1 inch  
(2.5 cm) on the sides and rear. Recommended clearances should be considered for the following reasons:  
Additional clearances should be considered for ease of installation and servicing.  
Additional clearances should be considered on all sides of the dryer to reduce noise transfer. For closet  
installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered  
doors with equivalent ventilation openings are acceptable.  
Closet Ventilation Requirements  
Closets with doors must have both an upper and lower vent to prevent heat and moisture buildup in the closet.  
One upper vent opening with a minimum opening of 48 sq. in. (310 cm2) must be installed no lower than 6 feet  
above the floor. One lower vent opening with a minimum opening of 24 sq. in. (155 cm2) must be installed no  
more than one foot above the floor. Install vent grilles in the door or cut down the door at the top and bottom to  
form openings. Louvered doors with equivalent ventilation openings are also acceptable.  
NOTE  
There should be at least a little space around the dryer (or any other appliance) to eliminate the transfer of  
vibration from one appliance to another. If there is enough vibration, it could cause appliances to make noise or  
come into contact, causing paint damage and further increasing noise.  
The images in this manual may be different from the actual components and accessories which are subject to  
change by the manufacturer without prior notice for product improvement purposes.  
INSTALLATION 13  
Installation Spacing for Recessed Area or Closet, with Stacked Washer and  
Dryer  
*
6"  
3"  
(76 m m )  
*
(152 m m )  
48 in.2*  
(310 cm2  
)
77 ½ "  
(1968 m m )  
24 in.2*  
(155 cm2  
)
3"  
*
(76 m m )  
1"  
(25 m m )  
*
5 ½ " **  
(140 m m )  
1"  
(25 m m )  
27"  
(686 m m )  
1"  
(25 m m )  
* Required spacing  
** For side or bottom venting, 2-inch (5.1 cm) of spacing is allowed.  
Installation Spacing for Cabinet  
For cabinet installation with a door, minimum ventilation openings in the top of the cabinet are required.  
* Required spacing  
7" *  
7" *  
(178 mm)  
(178 mm)  
9" *  
(229 mm)  
30 - 30 1/8"  
(127 mm) (761 - 765mm) (25 mm)  
5"*  
1"*  
1"  
27"  
1"  
(25 mm) (686 mm) (25 mm)  
NOTE  
The images in this manual may be different from the actual components and accessories which are  
subject to change by the manufacturer without prior notice for product improvement purposes.  
14 INSTALLATION  
Use an adjustable wrench to turn the leveling  
feet. Unscrew the legs to raise the dryer or  
screw in the legs to lower it. Adjust the leveling  
feet until the dryer is level from side to side and  
front to back. Make sure that all four leveling feet  
are in firm contact with the floor.  
Leveling the Dryer  
2
NOTE  
Adjust the leveling feet only as far as necessary  
to level the dryer. Extending the leveling feet more  
than necessary may cause the dryer to vibrate.  
To ensure that the dryer provides optimal drying  
performance, it must be level. To minimize vibration,  
noise, and unwanted movement, the floor must be a  
perfectly level, solid surface.  
Position the dryer in the final location. Place a  
level across the top of the dryer.  
1
Level  
Leveling Feet  
• All four leveling feet must rest solidly on the  
floor. Gently push on the top corners of the  
dryer to make sure that the dryer does not rock  
from corner to corner.  
NOTE  
If you are installing the dryer on the optional  
pedestal, you must use the leveling feet on the  
pedestal to level the dryer. The dryer leveling feet  
should be fully retracted.  
INSTALLATION 15  
While supporting the door, remove the 2 screws  
on the door hinge. Remove the door.  
Reversing the Door  
2
3
Tools Required  
Phillips screwdriver  
Large flat blade screwdriver (recommended for  
hinge screws if they are tight or your Phillips  
screwdriver is worn)  
Small flat blade screwdriver (for lifting out parts)  
WARNING  
Turn the door upside down and line up the holes  
in the hinge with the holes on the opposite side  
of the cabinet. Reinstall the door with the screws  
removed in step 2.  
To reduce the risk of damage to the dryer,  
property damage or personal injury, follow  
basic precautions, including the following:  
Support the door with a stool or box that fits  
under the door, or have an assistant support the  
weight of the door.  
Avoid dropping the door.  
Unplug the dryer or turn off power at the main  
circuit breaker before beginning door reversal.  
Always reverse the door BEFORE stacking the  
dryer on top of the washer.  
Door Reversal Instructions  
WARNING  
The instructions here are for changing the door swing  
from a right to a left side hinge. If the door has been  
reversed, and it is necessary to change it back, use  
care when following these instructions. Some of  
the illustrations and the left/right references will be  
reversed, and you will need to read the instructions  
carefully.  
Be sure to support the weight of the door before  
installing the hinge screws.  
Install the two decorative screws, the latch,  
4
and two latch screws removed in step 1 on the  
opposite side from which they were removed.  
WARNING  
Be sure to support the weight of the door before  
removing the hinge screws.  
Open the door and remove the two decorative  
screws, two latch screws, and the latch on the  
catch side with a screwdriver. Save these for  
step 4.  
1
Check that the door closes properly.  
5
16 INSTALLATION  
Preassemble a 4-inch (10.2 cm) elbow to the  
next 4-inch (10.2 cm) duct section, and secure  
all joints with duct tape. Be sure that the male  
end of the elbow faces AWAY from the dryer.  
Insert the elbow/duct assembly through the  
side opening and press it onto the adapter duct.  
Secure it in place with duct tape. Be sure that  
the male end of the duct protrudes 1.5 inches  
(3.8 cm) to connect the remaining ductwork.  
Attach the cover plate to the back of the dryer  
with the included screw.  
Installing the Side Vent Kit  
3
WARNING  
To reduce the risk of serious injury, death or  
property damage, follow basic precautions,  
including the following:  
Use long-sleeved gloves and safety glasses.  
Use a heavy metal vent.  
Do not use plastic or thin foil ducts.  
Clean old ducts before installing this dryer.  
Your new dryer is configured to vent to the rear. It can  
also vent to the bottom or side (right-side venting is  
not available on gas models).  
Cover Plate  
An adapter kit, part number 383EEL9001B, may be  
purchased from your LG retailer. This kit contains  
duct components necessary to change the dryer vent  
location.  
Elbow  
1½" (38 mm)  
Remove the rear exhaust duct retaining screw.  
Pull out the exhaust duct.  
1
Option 2: Bottom Venting  
Press the adapter duct onto the blower housing  
and secure it to the base of the dryer as shown.  
2
Retaining Screw  
Adapter Duct  
Rear Exhaust Duct  
Option 1: Side Venting  
Bracket  
Press the tabs on the knockout and carefully  
remove the knockout for the desired vent  
2
Insert the 4-inch (10.2 cm) elbow through the  
rear opening and press it onto the adapter duct.  
Be sure that the male end of the elbow faces  
down through the hole in the bottom of the  
dryer. Secure it in place with duct tape. Attach  
the cover plate to the back of the dryer with the  
included screw.  
opening (right-side venting is not available on  
gas models). Press the adapter duct onto the  
blower housing and secure to the base of the  
dryer as shown.  
3
Adapter Duct  
Bracket  
Knockout  
Cover Plate  
Elbow  
INSTALLATION 17  
To ensure safe and secure installation, please  
Stacking the Dryer  
observe the following instructions.  
Stacking Kit Installation  
Make sure the surface of the washer is clean  
and dry. Remove paper backing from the tape  
on one of the stacking kit side brackets.  
1
This stacking kit includes:  
Two (2) side rails  
One (1) front rail  
Four (4) screws  
Fit the side bracket to the side of the washer top  
as shown in the below illustration. Firmly press  
2
Tools Needed for Installation:  
the adhesive area of the bracket to the washer  
surface. Secure the side bracket to the washer  
with a screw on the back side of the bracket.  
Repeat steps 1 and 2 to attach the other side  
bracket.  
Phillips screwdriver  
WARNING  
To reduce the risk of electrical shock, fire,  
explosion, property damage, serious injury or  
death, follow basic precautions, including the  
following:  
Place the dryer on top of the washer, fitting the  
dryer feet into the side brackets as illustrated.  
Avoid finger injuries; do not allow fingers to be  
pinched between the washer and dryer.  
3
The weight of the dryer and the height of  
installation make this stacking procedure too  
risky for one person. Two or more people are  
required when installing the stacking kit.  
Slowly slide the dryer toward the back of the  
washer until the side bracket stoppers catch the  
dryer feet.  
Do not use the stacking kit with a gas dryer in  
potentially unstable conditions such as a mobile  
home.  
Place the washer on a solid, stable, level  
floor capable of supporting the weight of both  
appliances.  
Do not stack the washer on top of the dryer.  
If appliances are already installed, disconnect  
them from all power, water, or gas lines and from  
draining or venting connections.  
Insert the front rail between the bottom of the  
dryer and the top of the washer. Push the front  
rail toward the back of the washer until it comes  
in contact with the side rail stoppers.  
4
Install the two remaining screws to secure the  
front rail to the side rails.  
18 INSTALLATION  
Venting the Dryer  
WARNING  
Ductwork is not provided with the dryer. You  
should obtain the necessary ductwork locally.  
The vent hood should have hinged dampers to  
prevent backdraft when the dryer is not in use.  
WARNING  
To reduce the risk of fire or explosion, electric  
shock, property damage, injury to persons or  
death when using this appliance, follow basic  
safety precautions, including the following:  
The total length of flexible metal duct must not  
exceed 8 ft. (2.4 m).  
Do not crush or collapse ductwork.  
Ductwork  
Do not allow ductwork to rest on or contact sharp  
objects.  
Maximum  
Number  
If connecting to existing ductwork, make sure it is  
length of 4-inch  
suitable and clean before installing the dryer.  
Wall Cap Type  
of 90°  
diameter rigid  
metal duct  
Elbows  
Venting must conform to local building codes.  
Gas dryers MUST exhaust to the outdoors.  
Recommended  
0
1
2
3
65 ft.(19.8 m)  
55 ft.(16.8 m)  
47 ft.(14.3 m)  
36 ft.(11.0 m)  
Use only 4-inch (10.2 cm) rigid, semi-rigid or  
flexible metal ductwork inside the dryer cabinet  
and for venting outside.  
a
To reduce the risk of fire, combustion, or  
accumulation of combustible gases, DO  
NOT exhaust dryer air into an enclosed and  
unventilated area, such as an attic, wall, ceiling,  
crawl space, chimney, gas vent, or concealed  
space of a building.  
a
4
28 ft.(8.5 m)  
a: 4" (10.2 cm)  
Use only for short  
run installations  
0
1
2
3
55 ft.(16.8 m)  
47 ft.(14.3 m)  
41 ft.(12.5 m)  
30 ft.(9.1 m)  
To reduce the risk of fire, DO NOT exhaust the  
dryer with plastic or thin foil ducting.  
The exhaust duct must be 4-inch (10.2 cm) in  
diameter with no obstructions. The exhaust duct  
should be kept as short as possible. Make sure  
to clean any old ducts before installing your new  
dryer.  
b
4
22 ft.(6.7 m)  
b: 2.5" (6.35 cm)  
Rigid, semi-rigid or flexible metal ducting is  
recommended for use between the dryer and  
the wall. All non-rigid metal transition duct must  
be UL-listed. Use of other materials for transition  
duct could affect drying time.  
NOTE  
Deduct 6 ft. (1.8 m) for each additional elbow. Do  
not use more than four 90° elbows.  
In Canada, only those foil-type flexible ducts, if any,  
specifically identified for use with the appliance by  
the manufacturer should be used. In the United  
States, only those foil-type flexible ducts, if any,  
specifically identified for use with the appliance by  
the manufacturer and that comply with the Outline  
for Clothes Dryer Transition Duct, Subject 2158A,  
should be used.  
DO NOT use sheet metal screws or other  
fasteners which extend into the duct that could  
catch lint and reduce the efficiency of the  
exhaust system. Secure all joints with duct tape.  
Do not exceed the recommended duct length  
limitations noted in the chart. Failure to follow  
these instructions may result in extended drying  
times, fire or death.  
INSTALLATION 19  
Routing and Connecting Ductwork  
Correct Venting  
NOTE  
Follow the guidelines below to maximize drying  
performance and reduce lint buildup and  
condensation in the ductwork. Ductwork and  
fittings are NOT included and must be purchased  
separately.  
Use 4-inch (10.2 cm) diameter rigid, semi-rigid or  
flexible metal ductwork.  
The exhaust duct run should be as short as  
possible.  
Use as few elbow joints as possible.  
Incorrect Venting  
The male end of each section of exhaust duct must  
point away from the dryer.  
Use duct tape on all duct joints.  
Insulate ductwork that runs through unheated areas  
in order to reduce condensation and lint buildup on  
duct surfaces.  
Incorrect or inadequate exhaust systems are not  
covered by the dryer warranty. Dryer failures or  
service required because of such exhaust systems  
will not be covered by the dryer warranty.  
20 INSTALLATION  
WITHOUT WASHER: If the dryer does not share  
the cold water tap with a washer.  
Connecting the Inlet Hose  
(Steam Models)  
The dryer must be connected to the cold water tap using  
the new water supply hose. Do not reuse old hoses.  
a. Connect the straight end of the long hose to the  
cold water faucet.  
NOTE  
NOTE  
Before connecting the water line to the dryer,  
flush several gallons of water into a drain or  
bucket. This will help prevent foreign particles  
such as sand and scale from clogging the dryer  
inlet valve.  
Water supply pressure must be between 20  
and 120 psi (138—827 kPa) .  
Do not strip or cross-thread when connecting  
the inlet hose to the valve.  
Do not overtighten. Damage to the coupling  
may result.  
If the water supply pressure is more than 800  
kPa, a pressure-reducing valve should be  
installed.  
Connect the hose to the dryer. Connect the  
Periodically check the condition of the hose  
3
water supply hose to the dryer inlet valve tightly  
by hand and then tighten another 2/3 turn with  
pliers.  
Make sure that there are no kinks in the hoses  
and that they are not crushed.  
and replace the hose if necessary.  
Replace inlet hoses after 5 years of use to  
reduce the risk of hose failure.  
Record hose installation or replacement dates  
on the hoses for future reference.  
Check the rubber seal at each end of the inlet hoses.  
1
Two rubber seals are supplied with each inlet hose.  
They are used for preventing water leaks. Make sure  
the connection to the cold water tap is tight.  
Hose  
connector  
Rubber  
seal  
Turn on the cold water faucet.  
4
Y connector  
Check the installation type.  
2
Check for leaks at the Y-connector (if used) and  
in all hoses.  
5
Short  
hose  
Long  
hose  
Y-connector  
WITH WASHER  
WITHOUT WASHER  
Connect all water supply hoses tightly by hand  
and then tighten another 2/3 turn with pliers.  
WITH WASHER: When connecting the dryer to the  
same faucet as a washer.  
NOTE  
a. Shut off the cold water tap and remove the washer  
hose.  
If any leaks are found, shut off the water faucet,  
remove the hose and check the condition of the  
rubber seal.  
b. Connect the short hose to the Y-connector using  
one of the rubber seals.  
c. Connect the other end of the short hose to the cold  
water faucet.  
d. Connect the long dryer hose to one side of the  
Y-connector and connect the washer hose to the  
other side.  
INSTALLATION 21  
Connecting Gas Dryers  
WARNING  
Gas Supply Requirements (continued)  
WARNING  
Supply line requirements: Your laundry room  
must have a rigid gas supply line to your dryer.  
In the United States, an individual manual shutoff  
valve MUST be installed within at least 6 ft. (1.8  
m) of the dryer, in accordance with the National  
Fuel Gas Code ANSI Z223.1 or Canadian gas  
installation code CSA B149.1. A 1/8-inch NPT  
pipe plug must be installed.  
To reduce the risk of fire or explosion, electric  
shock, property damage, injury to persons,  
or death when using this appliance, follow  
requirements including the following:  
Electrical Requirements for Gas  
Models Only  
Do not, under any circumstances, cut or remove  
the third (ground) prong from the power cord.  
If using a rigid pipe, the rigid pipe should be  
0.5-inch IPS. If acceptable under local codes and  
ordinances and when acceptable to your gas  
supplier, 3/8-inch approved tubing may be used  
where lengths are less than 20 ft. (6.1 m). Larger  
tubing should be used for lengths in excess of 20  
ft. (6.1 m).  
For personal safety, this dryer must be properly  
grounded.  
This dryer must be plugged into a 120-VAC,  
60-Hz. grounded outlet protected by a  
15-ampere fuse or circuit breaker.  
To prevent contamination of the gas valve,  
purge the gas supply of air and sediment before  
connecting the gas supply to the dryer. Before  
tightening the connection between the gas  
supply and the dryer, purge remaining air until  
the odor of gas is detected.  
Where a standard 2-prong wall outlet is  
encountered, it is your personal responsibility  
and obligation to have it replaced with a properly  
grounded 3-prong wall outlet.  
DO NOT use an open flame to inspect for gas  
leaks. Use a noncorrosive leak detection fluid.  
ELECTRIC SHOCK HAZARD  
Use only a new AGA- or CSA-certified  
gas supply line with flexible stainless steel  
connectors.  
Failure to follow safety warnings could result  
in serious injury  
This dryer is equipped with a three-prong  
grounding plug for protection against shock  
hazard and should be plugged directly into a  
properly grounded three-prong receptacle. Do  
not cut or remove the grounding prong from this  
plug.  
Use Teflon tape or a pipe-joint compound that is  
insoluble in propane (LP) gas on all pipe threads.  
Connecting the Gas Supply  
Installation and service must be performed by  
a qualified installer, service agency, or the gas  
supplier.  
Gas Supply Requirements  
As shipped from the factory, this dryer is  
configured for use with natural gas (NG). It can  
be converted for use with propane (LP) gas.  
Gas pressure must not exceed 8-inch (20.4 cm)  
water column for NG, or 13-inch (33.1 cm) water  
column for LP.  
Use only a new stainless steel flexible connector  
and a new AGA-certified connector.  
A gas shutoff valve must be installed within 6 ft.  
(1.8 m) of the dryer.  
The dryer is configured for natural gas when  
shipped from the factory. Make sure that the  
dryer is equipped with the correct burner nozzle  
for the type of gas being used (natural gas or  
propane gas).  
A qualified service or gas company technician  
must connect the dryer to the gas service.  
Isolate the dryer from the gas supply system by  
closing its individual manual shutoff valve during  
any pressure testing of the gas supply.  
If necessary, the correct nozzle (for the LP  
nozzle kit, order part number 383EEL3002D)  
should be installed by a qualified technician and  
the change should be noted on the dryer.  
DO NOT attempt any disassembly of the dryer;  
disassembly requires the attention and tools of  
an authorized and qualified service technician or  
company.  
All connections must be in accordance with  
local codes and regulations. Gas dryers MUST  
exhaust to the outdoors.  
Securely tighten all gas connections.  
Connect the dryer to the type of gas shown on  
the nameplate.  
22 INSTALLATION  
NOTE  
NOTE  
In the Commonwealth of Massachusetts: This  
product must be installed by a licensed plumber  
or gas fitter. When using ball-type gas shut off  
valves, they shall be T-handle-type. A flexible gas  
connector, when used, must not exceed 3 feet.  
DO NOT use old connectors.  
Securely tighten all connections between the  
dryer and your laundry room’s gas supply.  
4
Turn on your laundry room’s gas supply.  
5
6
This dryer is configured from the factory for natural  
gas (NG). If the dryer is to be used with propane  
(LP) gas, it must be converted by a qualified service  
technician.  
Check all pipe connections (both internal and  
external) for gas leaks with a noncorrosive leak-  
detection fluid.  
Proceed to Venting the Dryer.  
Make sure that the gas supply to the laundry  
room is turned OFF and the dryer is unplugged.  
Confirm that the type of gas available in your  
laundry room is appropriate for the dryer.  
7
1
3/8" NPT gas  
Connection  
Remove the shipping cap from the gas fitting at  
the back of the dryer. Be careful not to damage  
the threads of the gas connector when removing  
the shipping cap.  
2
1/8" NPT Pipe Plug  
Gas Supply Shutoff  
AGA/CSA-Certified  
Stainless Steel Flexible  
Connector  
Valve  
Connect the dryer to your laundry room’s gas  
supply using a new flexible stainless steel  
connector with a 3/8-inch NPT fitting.  
3
High-Altitude Installations  
The BTU rating of this dryer is AGA-certified for  
elevations below 10,000 feet.  
If your gas dryer is being installed at an elevation  
above 10,000 feet, it must be derated by a qualified  
technician or gas supplier.  
INSTALLATION 23  
Connecting Electric Dryers  
WARNING  
WARNING  
Do not modify the plug and internal wire provided  
with the dryer.  
To reduce the risk of fire or explosion, electric  
shock, property damage, injury to persons,  
or death when using this appliance, follow  
requirements including the following:  
The dryer should be connected to a 4-hole outlet.  
If the plug does not fit the outlet, a proper outlet  
will need to be installed by a qualified electrician.  
Connect the power cord to the terminal block.  
Each colored wire should be connected to  
the same color screw. Wire color indicated on  
manual is connected to the same color screw in  
the block.  
Electrical Requirements for  
Electric Models Only  
The wiring and grounding must conform to  
the latest edition of the National Electrical  
Code, ANSI/NFPA 70 and all applicable local  
regulations. Please contact a qualified electrician  
to check your home’s wiring and fuses to ensure  
that your home has adequate electrical power to  
operate the dryer.  
Grounding through the neutral conductor is  
prohibited for: (1) new branch-circuit installations,  
(2) areas where local codes prohibit grounding  
through the neutral conductor.  
This dryer is supplied with the neutral wire  
grounded. This white ground wire MUST BE  
MOVED to the neutral terminal when a 4-wire  
cord is to be used, or where grounding through  
the neutral conductor is prohibited.  
This dryer must be connected to a grounded  
metal, permanent wiring system, or an  
equipment-grounding conductor must be run  
with the circuit conductors and connected to the  
equipment-grounding terminal or lead on the  
dryer.  
The dryer has its own terminal block that must  
be connected to a separate 240 VAC, 60-Hertz,  
single-phase circuit, fused at 30 amperes (the  
circuit must be fused on both sides of the line).  
ELECTRICAL SERVICE FOR THE DRYER  
SHOULD BE OF THE MAXIMUM RATE  
VOLTAGE LISTED ON THE NAMEPLATE. DO  
NOT CONNECT THE DRYER TO 110-, 115-, OR  
120-VOLT CIRCUIT.  
If the branch circuit to dryer is 15 ft. (4.5  
m) or less in length, use UL (Underwriters  
Laboratories) listed No.-10 AWG wire (copper  
wire only), or as required by local codes. If over  
15 ft. (4.5 m), use UL-listed No.-8 AWG wire  
(copper wire only), or as required by local codes.  
Allow sufficient slack in wiring so the dryer  
can be moved from its normal location when  
necessary.  
The power cord (pigtail) connection between the  
wall receptacle and the dryer terminal block IS  
NOT supplied with the dryer. Type of pigtail and  
gauge of wire must conform to local codes and  
with instructions on the following pages.  
24 INSTALLATION  
Tighten all screws securely.  
Four-Wire Power Cord  
8
9
A UL-listed strain relief is required.  
Use a 30-amp, 240-volt, 4-wire,  
UL-listed power cord with #10 AWG-  
minimum copper conductor and closed  
loop or forked terminals with upturned  
ends.  
Reinstall the terminal block access cover.  
Hot (Black)  
Neutral (White)  
Hot (Red)  
Ground Screw  
White Wire  
moved from  
Ground Screw  
Power Cord Ground  
Wire  
Remove the terminal block access cover on the  
upper back of the dryer.  
1
Install a UL-listed strain relief into the power  
cord through-hole.  
2
Thread a 30-amp, 240-volt, 4-wire, UL-listed  
power cord with #10 AWG-minimum copper  
conductor through the strain relief.  
3
Terminal Block  
UL-Listed Strain Relief  
UL-Listed 4-Wire Power  
Cord  
Transfer the dryer’s ground wire from behind the  
green ground screw to the center screw of the  
terminal block.  
4
Attach the two hot leads of the power cord to the  
outer terminal block screws.  
5
Attach the white neutral wire to the center screw  
of the terminal block.  
6
Attach the power cord ground wire to the green  
ground screw.  
7
INSTALLATION 25  
Attach the two hot leads of the power cord to the  
outer terminal block screws.  
Four-Wire Direct Wire  
6
7
8
9
A UL-listed strain relief is required.  
Use UL-listed 4-wire #10 AWG-  
minimum copper conductor cable.  
Allow at least 5 ft. (1.5 m) of wire to  
allow for removal and reinstallation of  
the dryer.  
Attach the white neutral wire to the center screw  
of the terminal block.  
Attach the power cord ground wire to the green  
ground screw.  
Tighten all screws securely.  
10 Reinstall the terminal block access cover.  
Remove 5-inch (12.7 cm) of the outer covering  
from the wire. Remove 5-inch of insulation from  
1
Hot (Black)  
Neutral (White)  
the ground wire. Cut off approximately 1.5-inch  
(3.8 cm) from the other three wires and strip 1  
inch (2.5 cm) insulation from each wire. Bend  
the ends of the three shorter wires into a hook  
shape.  
Hot (Red)  
Ground Screw  
White Wire  
moved from  
Ground Screw  
1" (2.5 cm)  
Power Cord Ground  
Wire  
Ground Wire  
5" (12.7 cm)  
Remove the terminal block access cover on the  
upper back of the dryer.  
2
Install a UL-listed strain relief into the power  
cord through-hole.  
3
Thread the 4-wire #10 AWG-minimum copper  
power cable prepared in step 1 through the  
strain relief.  
4
Terminal Block  
UL-Listed Strain Relief  
UL-Listed 4-Wire Power  
Cord  
Transfer the dryer’s ground wire from behind the  
green ground screw to the center screw of the  
terminal block.  
5
26 INSTALLATION  
Reinstall the terminal block access cover.  
Three-Wire Power Cord  
A 3-wire connection is NOT permitted  
on new construction after January 1,  
1996.  
8
Hot (Black)  
Neutral (White)  
Hot (Red)  
Ground Screw  
A UL-listed strain relief is required.  
Use a 30-amp, 240-volt, 3-wire,  
UL-listed power cord with #10 AWG-  
minimum copper conductor and closed  
loop or forked terminals with upturned  
ends.  
White Wire from Dryer  
harness  
External Ground Wire (If  
required by local codes)  
Remove the terminal block access cover on the  
upper back of the dryer.  
1
Install a UL-listed strain relief into the power  
cord through-hole.  
2
Thread a 30-amp, 240-volt, 3-wire, UL-listed  
power cord with #10 AWG-minimum copper  
conductor through the strain relief.  
3
Terminal Block  
UL-Listed Strain  
Relief  
UL-Listed 3-Wire Power  
Cord  
Attach the two hot leads (black and red) of the  
power cord to the outer terminal block screws.  
4
Attach the neutral (white) wire to the center  
terminal block screw.  
5
Connect the external ground (if required by local  
codes) to the green ground screw.  
6
Tighten all screws securely.  
7
INSTALLATION 27  
Attach the neutral (white) wire to the center  
Three-Wire Direct Wire  
A 3-wire connection is NOT permitted  
on new construction after January 1,  
1996.  
6
7
terminal block screw.  
Connect the external ground (if required by local  
codes) to the green ground screw.  
A UL-listed strain relief is required.  
Use UL-listed 3-wire, #10 AWG-  
minimum copper conductor cable.  
Allow at least 5 ft. (1.5 m) length to  
allow for removal and installation of  
dryer.  
Tighten all screws securely.  
8
9
Reinstall the terminal block access cover.  
Hot (Black)  
Neutral (White)  
Hot (Red)  
Remove 3.5-inch (8.9 cm) of the outer covering  
from the wire. Strip 1 inch (2.5 cm) insulation  
from each wire. Bend the ends of the three wires  
into a hook shape.  
Ground Screw  
1
1" (2.5 cm)  
White Wire from Dryer  
harness  
External Ground Wire (If  
required by local codes)  
Remove the terminal block access cover on the  
upper back of the dryer.  
2
Install a UL-listed strain relief into the power  
cord through-hole.  
3
Thread the 3-wire, #10 AWG-minimum copper  
conductor power cable prepared in step 1  
through the strain relief.  
4
Terminal Block  
UL-Listed Strain  
Relief  
UL-Listed 3-Wire Power  
Cord  
Attach the two hot leads (black and red) of the  
power cord to the outer terminal block screws.  
5
28 INSTALLATION  
Final Installation Check  
Once you have completed the installation of the dryer  
and it is in its final location, confirm proper operation  
with the following tests and Installation Test (Duct  
Check).  
Testing Dryer Heating  
GAS MODELS  
Close the dryer door and press the Encendido/  
Apagado(Power) button to turn the dryer on. Press  
the Time Dry and Inicio/Pausa(Start/Pause) buttons  
to start the test. When the dryer starts, the igniter  
should ignite the main burner.  
NOTE  
If all air is not purged from the gas line, the gas  
igniter may turn off before the main burner ignites. If  
this happens, the igniter will reattempt gas ignition  
after approximately two minutes.  
ELECTRIC MODELS  
Close the dryer door and press the Encendido/  
Apagado(Power) button to turn the dryer on. Press  
the Time Dry and Inicio/Pausa(Start/Pause) buttons  
to start the test. The exhaust air should be warm after  
the dryer has been operating for 3 minutes.  
Checking Airflow  
Effective dryer operation requires proper airflow.  
The adequacy of the airflow can be measured by  
evaluating the static pressure. Static pressure in the  
exhaust duct can be measured with a manometer,  
placed on the exhaust duct approximately 2 ft.  
(60.9 cm) from the dryer. Static pressure in the  
exhaust duct should not exceed 0.6 inch (1.5 cm).  
The dryer should be checked while the dryer is  
running with no load.  
Checking Levelness  
Once the dryer is in its final location, recheck the  
dryer to be sure it is level. Make sure it is level front  
to back and side to side, and that all four leveling feet  
are in firm contact with the floor.  
INSTALLATION 29  
Press the Inicio/Pausa(Start/Pause) button.  
Installation Test (Duct Check)  
3
4
The dryer will start the test, which will last a  
few minutes. The heat will be turned on and the  
temperatures in the drum will be measured.  
Once you have completed the installation of the  
dryer, use this test to make sure the condition of the  
exhaust system is adequate for proper operation of  
the dryer. This test should be performed to alert you  
to any serious problems in the exhaust system of  
your home.  
Check the display for results.  
(DF22BV2SR, DF22BV2SGR,  
DF22VV2SR, DF22VV2SGR, DF22WV2BR)  
During the test cycle, monitor the Flow Sense™  
display on the control panel. If the Flow Sense™  
LED has not turned on, when the cycle ends,  
the exhaust system is adequate. If the exhaust  
system is severely restricted, the Flow Sense™  
LED will turn on. Other problems may also be  
shown with error codes. See the chart on the  
next page for error code details and solutions.  
Your dryer features Flow Sense™, an innovative  
sensing system that automatically detects  
blockages and restrictions in dryer ductwork.  
Keeping ductwork clean of lint buildup and free of  
restrictions allows clothes to dry faster and reduces  
energy use.  
NOTE  
The dryer should be cool before starting this test. If  
the dryer was warmed up during installation, run the  
Secado Con Aire(Air Dry) cycle for a few minutes to  
reduce the interior temperature.  
LED turned on:  
RESTRICTED  
Activating the Installation Test  
The Flow Sense™ LED indicates that the  
exhaust system is severely restricted. Have the  
system checked immediately, as performance  
will be poor.  
Remove the drying rack and literature, and  
then close the door.  
1
Do not load anything in the drum for this test, as  
it may affect the accuracy of the results.  
(DF22WV2SR, DF20WV2R, DF22VV2R)  
During the test cycle, monitor the Flow Sense™  
display on the control panel. If no bars are  
displayed, when the cycle ends, the exhaust  
system is adequate. If the exhaust system is  
severely restricted, the display will show four  
bars. Other problems may also be shown with  
error codes. Refer to the next page for error  
code details and solutions.  
(DF22BV2SR, DF22BV2SGR, DF22VV2SR,  
DF22VV2SGR, DF22WV2BR) Press and hold  
Señal(Signal) and Temp.  
2
NO BARS:  
OK  
FOUR BARS:  
RESTRICTED  
(DF22WV2SR, DF20WV2R, DF22VV2R) Press  
and hold Ahorro de Energía (Energy Saver)  
and Temp.  
Four bars indicates that the exhaust system is  
severely restricted. Have the system checked  
immediately, as performance will be poor.  
Then press the Encendido/Apagado (Power)  
button.  
End of cycle.  
5
(On models with a glass touch control panel, press  
the Encendido/Apagado (Power) button then  
IMMEDIATELY press and hold the other 2 buttons.  
(DF22BV2SR, DF22BV2SGR, DF22VV2SR,  
DF22VV2SGR, DF22WV2BR)  
At the end of the test cycle,  
The test cycle will end and the dryer will shut off  
automatically after a short delay.  
will display.  
This button sequence activates the installation  
test. The code  
is successful.  
will display if the activation  
(DF22BV2SR,  
DF22BV2SGR,  
DF22VV2SR,  
DF22VV2SGR  
DF22WV2BR)  
(DF22WV2SR, DF20WV2R, DF22VV2R)  
At the end of the test cycle,  
will display. The  
test cycle will end and the dryer will shut off  
automatically after a short delay.  
(DF22WV2SR,  
DF20WV2R,  
DF22VV2R)  
30 INSTALLATION  
Check the Duct Condition  
Restricted or Blocked Airflow  
If the Flow Sense™ Display is turned on, check the  
exhaust system for restrictions and damage. Repair  
or replace the exhaust system as needed.  
Avoid long runs or runs with multiple elbows or  
bends.  
NOTE  
When the dryer is first installed, this test should be  
performed to alert you to any existing problems with  
the exhaust duct in your home. However, since the  
test performed during normal operation provides  
more accurate information on the condition of the  
exhaust duct than the installation test, the number  
of bars displayed during the two tests may not be  
the same.  
Too many elbows or  
exhaust too long  
Excess or crushed  
transition duct  
Do not interrupt the test cycle, as this could result in  
inaccurate results.  
Even if the Flow Sense display does not light up  
during the test cycle, some restrictions may still be  
present in the exhaust system. Refer to the Venting  
the Dryer section of this manual for complete  
exhaust system and venting requirements.  
Check for blockages and lint buildup.  
Lint buildup or blockage  
Error Codes  
Check the error code before you call for service.  
Error  
Code  
Possible  
Causes  
Solutions  
tE1 or  
tE2  
Temperature  
sensor failure.  
Turn off the dryer and call  
for service.  
Humidity sensor Turn off the dryer and call  
HS  
failure.  
for service.  
Make sure the ductwork is not crushed or restricted.  
Check the power supply  
or the connection of  
the power cord to the  
terminal block. Refer to  
the Connecting Electric  
Dryers section of this  
manual for complete  
instructions.  
Electric dryer  
power cord is  
not connected  
correctly, or  
house power  
supply is  
incorrect.  
PS,  
PF, or  
nP  
Reset circuit breaker  
or replace fuse. Do  
not increase the fuse  
capacity.  
If the problem is a  
circuit overload, have it  
corrected by a qualified  
electrician.  
Crushed or damaged  
exhaust  
House fuse is  
blown, circuit  
breaker has  
tripped, or  
power outage  
has occurred.  
Gas supply or  
service turned  
off. (Gas Model  
only.)  
Confirm that house gas  
shutoff and the dryer  
gas shutoff are both fully  
open.  
gAS  
OPERATION 31  
OPERATION  
WARNING  
To reduce the risk of fire, electric shock, or injury to persons, read the SAFETY INSTRUCTIONS before  
operating this appliance.  
Using the Dryer  
Clean the Lint Filter  
1
If the lint filter has not already been cleaned, lift out the filter and remove the  
lint from the last load. This will help ensure the fastest and most efficient drying  
performance. Make sure to reinstall the filter, pressing down until it clicks firmly  
into place.  
Load the Dryer  
2
Load the dryer with the wet laundry from the washer. If the load is extra large,  
you may need to divide it into smaller loads for proper performance and fabric  
care.  
Turn on the Dryer  
3
Press the Encendido/Apagado (Power) button to turn on the dryer. The cycle  
LEDs will illuminate and a chime will sound.  
Select a Cycle  
4
Turn the cycle selector knob in either direction until the LED for the desired  
cycle is on. The preset temperature, dry level, and option settings for that cycle  
will be shown. Default settings for the selected cycle can now be changed if  
desired. Refer to the Cycle Setting and Options page for details.  
NOTE  
Not all options or modifiers are available on all cycles. Refer to the Cycle  
Guide page for default settings and available options. A different chime will  
sound and the LED will not come on if the selection is not available.  
Begin Cycle  
5
Press the Inicio/Pausa(Start/Pause) button to begin the cycle. The cycle can  
be paused at any time either by opening the door or by pressing the Inicio/  
Pausa(Start/Pause) button. If the cycle is not restarted within 14 minutes of  
being paused, the dryer will shut off and the settings will be lost.  
End of Cycle  
6
When the cycle is finished, the chime will sound. Immediately remove your  
clothing from the dryer to reduce wrinkling. If Anti Arrugas(Wrinkle Care) is  
selected, the dryer will tumble briefly every few minutes to help prevent wrinkles  
from setting in the clothes.  
32 OPERATION  
Grouping Similar Items  
For best results, sort clothes into loads that can be  
dried with the same drying cycle.  
Check the Lint Filter Before  
Every Load  
Always make sure the lint filter is clean before  
starting a new load; a clogged lint filter will increase  
drying time. To clean, pull the lint filter straight up and  
roll any lint off the filter with your fingers. Push the lint  
filter firmly back into place. See Regular Cleaning  
for more information.  
Different fabrics have different care requirements,  
and some fabrics will dry more quickly than others.  
Loading the Dryer  
Always ensure the lint filter is properly installed  
before running the dryer. Running the dryer with a  
loose or missing lint filter will damage the dryer and  
articles in the dryer.  
WARNING  
To reduce the risk of fire, explosion, electric  
shock, injury to persons, and death when  
using this appliance, follow basic precautions,  
including the following:  
Check all pockets to make sure that they are  
empty. Items such as clips, pens, coins, and  
keys can damage both the dryer and your  
clothes. Flammable objects such as lighters or  
matches could ignite, causing a fire.  
Never dry clothes that have been exposed to  
oil, gasoline, or other flammable substances.  
Washing clothes will not completely remove oil  
residues.  
Lint Filter  
Sorting Laundry  
NOTE  
Loading Tips  
Fabric Care Labels  
Many articles of clothing include a fabric care label.  
Using the chart below, adjust the cycle and option  
selections to care for your clothing according to the  
manufacturer’s recommendations.  
Combine large and small items in the same load.  
Damp clothes will expand as they dry. Do not  
overload the dryer; clothes require room to tumble  
and dry properly.  
Tumble dry  
Use mesh laundry bags to separate clothes with  
zippers, hooks, straps, and drawstrings to prevent  
them from catching on or tangling with other clothes  
or damaging the lint filter.  
Dry  
Gentle/delicate  
Do not tumble  
dry  
Normal  
Permanent  
Press/ wrinkle  
resistant  
Do not dry (used  
with do not wash)  
Heat setting  
High  
Low  
Medium  
No heat/air  
OPERATION 33  
Control Panel  
Non-Steam Models (DF22WV2SR, DF20WV2R, DF22VV2R)  
Steam Models (DF22BV2SR, DF22BV2SGR, DF22VV2SR, DF22VV2SGR, DF22WV2BR)  
NOTE  
Model numbers can be found on the cabinet inside the door.  
34 OPERATION  
Time and Status Display  
Encendido/Apagado (Power) Button  
f
a
Press the button to turn the dryer Encendido(On)  
Press again to turn the dryer Apagado(off).  
The display shows the settings, estimated time  
remaining, options, and status messages for the  
dryer.  
NOTE  
Pressing the Encendido/Apagado (Power) button  
during a cycle will cancel that cycle and any load  
settings will be lost.  
Cycle Option Buttons  
g
Press each of these buttons to select additional cycle  
options. Press and hold any button marked with an  
asterisk for 3 seconds to activate a special function.  
Cycle Selector Knob  
b
Turn this knob to select the desired cycle. Once  
the desired cycle has been selected, the standard  
presets will be shown in the display. On Secado  
Manual (Manual Dry) cycles, these settings can be  
adjusted using the cycle modifier buttons anytime  
before starting the cycle.  
Steam Functions  
h
LG’s steam technology allows you to inject fabrics  
with a swirling jet of steam to refresh clothes, reduce  
static, and make ironing easier. Simply select the  
Steam Fresh™ or Steam Sanitary™ cycle or add a  
Steam option to selected cycles.  
Inicio/Pausa(Start/Pause) Button  
c
Press this button to start the selected cycle. If the  
dryer is running, use this button to pause the cycle  
without losing the current settings.  
NOTE  
If you do not press the Inicio/Pausa(Start/Pause)  
button to resume a cycle within 14 minutes, the  
dryer turns off automatically and all cycle settings  
are lost.  
Cycle Modifier Buttons  
d
Use these buttons to select the desired cycle settings  
for the selected cycle. The current settings are shown  
in the display. Press the button for that option to view  
and select other settings.  
Más Tiempo/Menos Tiempo (More Time/Less  
Time) Buttons  
e
e
Use these buttons with the Tiempo de Secado(Time  
Dry) and other Secado Manual (Manual Dry) cycles  
to adjust the drying time. Press the Más Tiempo  
(More Time) button to increase the selected manual  
cycle time by 5 minutes; press the Menos Tiempo  
(Less Time) button to decrease the cycle time by 5  
minutes.  
OPERATION 35  
DF22BV2SR, DF22BV2SGR,  
DF22WV2SR, DF20WV2R, DF22VV2R  
DF22VV2SR, DF22VV2SGR, DF22WV2BR  
AI Sensor Dry Indicator  
Cycle Completion Indicator  
i
n
o
AI Sensor Dry optimizes drying times and  
temperatures by detecting the laundry’s  
characteristics.  
This portion of the display shows which stage  
of the drying cycle is currently underway  
(Secado(Dry) or Enfriado(Cool)).  
The indicator lights up when the Normal cycle  
is selected with the Normal dry level, except  
when the Ahorro de Energía(Energy Saver)  
option is turned on.  
Limpieza de Filtro(Clean Filter) Reminder  
The display will show Limpieza de Filtro(Clean  
Filter) when the dryer is turned on as a  
reminder to clean the filter. It turns off when the  
Inicio/Pausa(Start/Pause) button is pressed.  
Bloqueo de Panel(Control Lock) Indicator  
j
k
When Bloqueo de Panel(Control Lock) is set,  
the Bloqueo de Panel(Control Lock) indicator  
appears and all buttons are disabled except  
the Encendido/Apagado (Power) button. This  
prevents children from changing settings while  
the dryer is operating.  
Flow Sense Duct Blockage Sensing System  
Indicator  
p
The Flow Sense™ duct blockage sensing  
system detects and alerts you to blockages  
in the ductwork that reduce exhaust flow from  
the dryer. Maintaining a clean exhaust system  
improves operating efficiency and helps  
minimize service calls, saving you money.  
WI-FI Indicator  
When the appliance is connected to the Internet  
through a home Wi-Fi network, this indicator  
appears.  
Inicio Remoto(Remote Start) Indicator  
l
m
This indicator lights up when the Inicio  
Remoto(Remote Start) feature is activated.  
Estimated Time Remaining  
This display shows the estimated time  
remaining for Sensor de Secado (Sensor Dry)  
cycles or the actual time remaining for Tiempo  
de Secado (Time Dry) or Secado Manual  
(Manual Dry) cycles.  
NOTE  
The cycle time on Sensor de Secado (Sensor  
Dry) cycles may fluctuate as the dryer  
recalculates drying time for optimal results.  
36 OPERATION  
Cycle Guide  
Sensor de Secado (Sensor Dry)  
Cycles  
Sensor de Secado (Sensor Dry) cycles utilize LG’s  
unique dual sensor system to detect and compare  
the moisture level in clothes and in the air and adjust  
the drying time as needed to ensure superior results.  
The dryer automatically sets the dryness level and  
temperature at the recommended setting for each  
cycle. The estimated time remaining will be shown in  
the display.  
NOTE  
To protect your garments not every dryness level,  
temperature, or option is available with every cycle.  
See the Cycle Guide for details.  
Secado Manual (Manual Dry) Cycles  
Use Secado Manual (Manual Dry) cycles to select  
a specific amount of drying time and a drying  
temperature. When a Secado Manual (Manual Dry)  
cycle is selected, the Estimated Time Remaining  
display shows the actual time remaining in your  
cycle. You can change the actual time in the cycle by  
pressing the Más Tiempo (More Time) or Menos  
Tiempo (Less Time) buttons.  
NOTE  
The Ahorro de Energía(Energy Saver) option is  
turned on by default in the Normal Cycle. Turn off  
the Ahorro de Energía(Energy Saver) option for  
a faster Normal cycle which begins with heated  
drying. To turn the Ahorro de Energía(Energy Saver)  
default off, press the Ahorro de Energía(Energy  
Saver) button. Encendido(On) or Apagado(off)  
appears in the display.  
OPERATION 37  
Non-Steam Models (DF22WV2SR, DF20WV2R, DF22VV2R)  
= default setting  
= allowable option  
* = Ahorro de Energía (Energy Saver)  
on by default  
Nivel de  
Secado(Dry  
Level)  
Alerta Secado  
Anti Arrugas  
Cycle  
Fabric Type  
Temp.  
Húmedo(Damp  
(Wrinkle Care)  
Dry Signal)  
SENSOR DE SECADO(SENSOR DRY)  
Normal  
Media Alta  
(Med.High)  
(between  
Medium and  
High)  
Work clothes,  
corduroys, etc.  
Normal*  
Adj.  
Normal  
Adj.  
Carga  
Pesada  
(Heavy  
Duty)  
Jeans, heavyweight  
items  
Alta(High)  
Normal  
Adj.  
Ropa de  
cama  
(Bedding)  
Comforters, Pillows,  
Shirts  
Media(Medium)  
Normal  
Media Alta  
(Med.High)  
(between  
Medium and  
High)  
Toallas  
(Towels)  
Denim, towels, heavy  
cottons  
Adj.  
Normal  
Adj.  
Cargas  
Pequeñas  
(Small  
Only normal & cotton/  
towels fabric type (Max.  
3 lb)  
Alta(High)  
Load)  
Normal  
Adj.  
Planchado  
Permanente  
(Perm.  
Permanent press,  
synthetic items  
Media(Medium)  
Press)  
Normal  
Adj.  
Baja(Low)  
(between  
Medium and  
Ultra Low)  
Delicados  
(Delicates)  
Lingerie, sheets,  
blouses  
Secado Manual (Manual Dry)  
Alta(High)  
Secado  
Rápido  
(Speed Dry)  
For small loads with  
short drying times  
Off  
Adj.  
Secado Con  
Aire (Air  
Dry)  
For items that require  
heat-free drying such  
as plastics or rubber  
Off  
No Heat  
38 OPERATION  
Steam Models (DF22BV2SR, DF22BV2SGR, DF22VV2SR,  
DF22VV2SGR , DF22WV2BR)  
= default setting  
= allowable option  
* = Ahorro de Energía (Energy Saver)  
on by default  
Alerta  
Secado Reducir  
Anti  
Nivel de  
Secado(Dry  
Level)  
Arrugas Húmedo Estática  
Cycle  
Fabric Type  
Temp.  
(Wrinkle  
Care)  
(Damp  
Dry  
(Reduce  
Static)  
Signal)  
SENSOR DE SECADO(SENSOR DRY)  
Normal  
Media Alta  
(Med.High)  
(between  
Medium and  
High)  
Work clothes,  
corduroys, etc.  
Normal*  
Adj.  
Normal  
Adj.  
Carga Pesada  
(Heavy Duty)  
Jeans, heavyweight  
items  
Alta(High)  
Normal  
Adj.  
Ropa de cama  
(Bedding)  
Comforters, pillows,  
shirts  
Meida  
(Medium)  
Normal  
Cargas  
Pequeñas  
(Small Load)  
Only normal & cotton/  
towels fabric type (Max.  
3 lb)  
Alta(High)  
Alta(High)  
Adj.  
Do not use this cycle  
with delicate fabrics  
Antibacterial  
Muy Seco(Very)  
Normal  
Adj.  
Planchado  
Permanente  
(Perm. Press)  
Permanent press,  
synthetic items  
Meida  
(Medium)  
Normal  
Baja (Low)  
(between  
Medium and  
Ultra Low)  
Delicados  
(Delicates)  
Lingerie, sheets,  
blouses  
Adj.  
Ropa Deportiva  
(Sportswear)  
Sportswear  
Off  
Normal  
Media Alta  
(Med.High)  
(between  
Medium and  
High)  
Toallas  
(Towels)  
Denim, towels, heavy  
cottons  
Adj.  
SECADO MANUAL(MANUAL DRY)  
Alta(High)  
Secado  
Rápido (Speed  
Dry)  
For small loads with  
short drying times  
Off  
Adj.  
For items that require  
heat-free drying such  
as plastics or rubber  
Secado Con  
Aire (Air Dry)  
Off  
No Heat  
CICLO DE VAPOR(STEAM CYCLE)  
Steam  
Sanitary™  
Comforters, bedding,  
children's clothing  
Off  
Off  
Alta(High)  
Media Alta  
(Med.High)  
(between  
Medium and  
High)  
Comforters, shirts,  
trousers (except  
especially delicate  
fabrics)  
Steam Fresh™  
Adj.  
OPERATION 39  
Cycle Modifier Buttons  
Option Buttons  
Sensor de Secado (Sensor Dry) cycles have preset  
settings that are selected automatically. Secado  
Manual (Manual Dry) cycles have default settings, but  
you may also customize the settings using the cycle  
modifier buttons. Press the button for that option to  
view and select other settings.  
The dryer features several additional cycle options to  
customize cycles to meet individual needs. Certain  
option buttons also feature a special function that  
can be activated by pressing and holding that option  
button for 3 seconds.  
Adding Cycle Options to a Cycle  
Nivel de Secado (Dry Level)  
Use this button to select the level of dryness for the  
cycle. Press the Nivel de Secado (Dry Level) button  
repeatedly to scroll through available settings.  
Turn on the dryer and turn the cycle selector  
knob to select the desired cycle.  
1
Use the cycle modifier buttons to adjust the  
settings for that cycle.  
This option is only available with Sensor de Secado  
(Sensor Dry) cycles.  
2
The dryer will automatically adjust the cycle time.  
Selecting dry levels above Normal will increase the  
cycle time. Selecting dry levels below Normal will  
decrease the cycle time.  
Press the cycle option button(s) to add the  
desired options. A confirmation message is  
shown in the display.  
3
Use the dry level between Normal and Húmedo  
(Damp) or the Damp dry level for items that you  
wish to iron.  
Press the Inicio/Pausa(Start/Pause) button to  
start the cycle. The dryer starts automatically.  
4
Temp.  
Use this button to adjust the temperature setting.  
This allows precise care of fabrics and garments.  
Press the Temp. button repeatedly to scroll through  
available settings.  
Anti Arrugas(Wrinkle Care)  
Selecting this option will tumble the load periodically  
for up to 3 hours after the selected cycle, or until the  
door is opened. This is helpful in preventing wrinkles  
when you are unable to remove items from the dryer  
immediately.  
Tiempo de Secado (Time Dry)  
Use this button to manually select the drying time,  
from 20 to 60 minutes, in 10-minute increments.  
Use this for small loads or to remove wrinkles. Use  
the Más Tiempo/Menos Tiempo (More Time/Less  
Time) buttons to add or reduce the drying time in  
5-minute increments.  
Alerta Secado Húmedo(Damp Dry  
Signal)  
When this option is selected, the dryer signals when  
the load is approximately 80% dry. This allows you  
to remove faster-drying lightweight items or items  
that you would like to iron or hang while they are still  
slightly damp.  
Señal(Signal)  
The appliance plays a melody when the drying cycle  
is finished. the buttons make a sound each time a  
button is pressed. Use this button to turn the melody  
and button tones on or off.  
(DF22BV2SR, DF22BV2SGR, DF22VV2SR,  
DF22VV2SGR , DF22WV2BR)  
To turn Apag./Enc. (On/Off), press the Alerta  
Secado Húmedo(Damp Dry Signal) button.  
(DF22BV2SR, DF22BV2SGR, DF22VV2SR,  
DF22VV2SGR , DF22WV2BR)  
(DF22WV2SR, DF20WV2R, DF22VV2R)  
To turn Apag./Enc. (On/Off), press and hold the  
Nivel de Secado(Dry Level) button for 3 seconds.  
To turn on/off, press the Señal(Signal) button.  
When this function is turned on, the Apag./Enc. (On/  
Off) LED on the display lights up.  
Ahorro de Energía(Energy Saver)  
(DF22WV2SR, DF20WV2R, DF22VV2R)  
This option helps to reduce the energy consumption  
of the Normal Cycle, depending on the load size.  
When the Ahorro de Energía(Energy Saver) option is  
selected, the cycle begins with an air dry section and  
the drying time is increased.  
To turn Apag./Enc. (On/Off), press and hold the Anti  
Arrugas(Wrinkle Care) button for 3 seconds.  
40 OPERATION  
Special Functions  
Some cycle option buttons also activate secondary  
functions. These special functions are marked with an  
asterisk (*). Press and hold the option button marked  
with the special function to activate it.  
Steam Functions  
(Steam Models)  
LG’s new steam technology injects fabrics with a  
swirling jet of hot steam to refresh clothes, reduce  
static, and make ironing easier.  
Simply select the Steam Fresh™ or Steam  
Sanitary™ cycle, or add a steam option to selected  
cycles.  
Bloqueo de Panel(Control Lock)  
Use this option to prevent unwanted use of the dryer  
or to keep cycle settings from being changed while  
the dryer is operating.  
WARNING  
Activating the Control Lock Function  
To reduce the risk of serious injury, death,  
explosion, or fire, follow basic safety  
precautions, including the following:  
Press and hold the below button(s) for 3 seconds.  
Alerta Secado Húmedo(Damp Dry Signal)  
(DF22BV2SR, DF22BV2SGR, DF22VV2SR,  
DF22VV2SGR , DF22WV2BR)  
Do not open the dryer door during steam cycles.  
Do not touch the steam nozzle in the drum  
during or after the steam cycle.  
Tiempo de Secado(Time Dry) and Ahorro de  
Energía(Energy Saver) (DF22WV2SR, DF20WV2R,  
DF22VV2R)  
The Steam Sanitary™ Cycle  
The Steam Sanitary™ cycle is ideal for sanitizing  
non-washable items quickly and easily using the  
power of steam.  
When the controls are locked, CL and the remaining  
time are alternately shown on the display during the  
dry cycle. All controls will be disabled except the  
Encendido/Apagado (Power) button.  
Use this cycle for cotton and polyester material.  
(Do NOT use for urethane foam, down feathers or  
delicate items).  
Deactivating the Bloqueo de Panel(Control Lock)  
Function  
Press and hold the below button(s) for 3 seconds.  
The Steam Fresh™ Cycle  
Alerta Secado Húmedo(Damp Dry Signal)  
(DF22BV2SR, DF22BV2SGR, DF22VV2SR,  
DF22VV2SGR , DF22WV2BR)  
Steam Fresh™ uses the power of steam to quickly  
reduce wrinkles and odors in fabrics. It brings new  
life to wrinkled clothes that have been stored for an  
extended time and makes heavily wrinkled clothes  
easier to iron. Steam Fresh™ can also be used to  
help reduce odors in fabrics.  
Tiempo de Secado(Time Dry) and Ahorro de  
Energía(Energy Saver) (DF22WV2SR, DF20WV2R,  
DF22VV2R)  
Once set, Bloqueo de Panel(Control Lock)  
remains active until it is manually deactivated.  
Bloqueo de Panel(Control Lock) must be turned off  
to run another cycle.  
NOTE  
The cycle time depends on the load (number of  
items). Press the Más Tiempo (More Time) or  
Menos Tiempo (Less Time) button to change the  
display to reflect the number of items in the load.  
The display will show 1, 3, 5 or  
fewer items, 5 is for 4 or 5 items, and  
a large load such as a comforter.  
Luz Del Tambor(Drum Light)  
(DF22BV2SR, DF22BV2SGR,  
DF22VV2SR, DF22VV2SGR ,  
DF22WV2BR)  
The drum is equipped with a blue LED that  
illuminates when the dryer is turned on. This light  
automatically turns off when the door is closed  
and the cycle starts. To turn on the light during a  
cycle, press and hold the Anti Arrugas(Wrinkle  
Care) button for three seconds. The drum light will  
illuminate and then turn off automatically after four  
minutes.  
. 3 means 3 or  
indicates  
Using the Steam Fresh™ Cycle  
Turn on the dryer and turn the cycle selector  
knob to select the Steam Fresh™ cycle.  
1
2
3
To add an option, select Anti Arrugas  
(Wrinkle Care).  
The display shows the load size (number of  
items). Change the steam time by pressing the  
Más Tiempo (More Time) or Menos Tiempo  
(Less Time) buttons to fit the size of the load.  
Press Inicio/Pausa(Start/Pause) to start the cycle.  
4
OPERATION 41  
The Steam Options  
The Reducir Estática(Reduce Static) option injects  
steam late in the drying cycle to reduce the static  
electricity caused by dry fabrics rubbing together.  
NOTE  
When Sensor de Secado(Sensor Dry) is selected  
with the Reducir Estática(Reduce Static) option, the  
dry levels below Normal cannot be selected.  
The Reducir Estática(Reduce Static) option can  
also be selected during Tiempo de Secado(Time  
Dry) cycles.  
After the Steam option is selected in Tiempo de  
Secado(Time Dry), the Más Tiempo (More Time)  
or Menos Tiempo (Less Time) buttons will change  
the steam time ONLY.  
Press the Más Tiempo (More Time) or Menos  
Tiempo (Less Time) button to adjust the cycle time  
depending on the size of the load (7, 9, 11, 14, 16,  
or 18 items).  
Adding Steam to a Standard Cycle  
Turn on the dryer and turn the cycle selector  
knob to select the desired cycle.  
1
Use the cycle setting buttons to adjust the  
settings for that cycle.  
2
Press Turbo Steam to add steam. If desired,  
select the Reducir Estática(Reduce Static) or  
3
Anti Arrugas(Wrinkle Care) options. Then adjust  
for the load size using the Más Tiempo (More  
Time) or Menos Tiempo (Less Time) buttons.  
Press Inicio/Pausa(Start/Pause) to start the  
cycle.  
4
NOTE  
Steam may not be clearly visible during the steam  
cycles. This is normal.  
Do not use Steam Fresh™ with items such as wool,  
wool blankets, leather jackets, silk, wet clothes,  
lingerie, foam products, or electric blankets.  
For best results, load articles of similar size and  
fabric type. Do not overload.  
When the filter/duct is clogged, the steam option  
may not have optimal results.  
When the steam function is operating, the drum will  
stop to allow steam to stay in the drum.  
42 OPERATION  
= default setting  
Steam Cycle Guide  
= allowable option  
Default  
Time  
Dry  
Level  
Fabric  
State  
Fabric  
Type  
Maximum  
Amount  
Steam  
Temp.  
Comforter  
Bedding  
Single  
(1 each)  
Steam  
Turbo  
Steam  
31 minutes  
10 minutes  
Alta(High)  
Dry  
SanitaryTM  
Children’s  
clothing  
3 lbs.  
Media  
Alta(Med.  
High)  
Single  
(1 each)  
Comforter  
Shirts*  
Steam  
Turbo  
Steam  
Dry  
FreshTM  
Adj.  
5 each  
Reducir  
Estática  
(Reduce  
Static)  
Follows  
Selected  
Cycle  
Varies by  
selected  
cycle  
8 lbs.  
(18 Items.)  
Wet  
Wet  
Wet  
Steam  
Option  
Follows  
Selected  
Cycle  
Varies by  
selected  
cycle  
Turbo  
Steam  
8 lbs.  
(18 Items.)  
Reducir  
Estática  
(Reduce  
Static)  
Alta(High)  
Adj.  
Tiempo de  
Secado  
(Time Dry)  
Varies by  
selected  
cycle  
8 lbs.  
(18 Items.)  
38 minutes  
* Shirt: 70% cotton, 30% poly blend. Except especially delicate fabrics  
SMART FUNCTIONS 43  
If the appliance is having trouble connecting to the  
Wi-Fi network, it may be too far from the router.  
Purchase a Wi-Fi repeater (range extender) to  
improve the Wi-Fi signal strength.  
SMART FUNCTIONS  
LG ThinQ Application  
The LG ThinQ application allows you to communicate  
with the appliance using a smartphone.  
The network connection may not work properly  
depending on the Internet service provider.  
The Wi-Fi connection may not connect or may  
be interrupted because of the home network  
environment.  
Before Using LG ThinQ  
If the appliance cannot be registered due to  
problems with the wireless signal transmission,  
unplug the appliance and wait about a minute  
before trying again.  
Use a smartphone to check the strength of  
the wireless router (Wi-Fi network) near the  
appliance.  
1
• If the distance between the appliance and the  
wireless router is too far, the signal strength  
becomes weak. It may take a long time to  
register or installation may fail.  
If the firewall on your wireless router is enabled,  
disable the firewall or add an exception to it.  
The wireless network name (SSID) should be a  
combination of English letters and numbers. (Do not  
use special characters.)  
Turn off the Mobile data or Cellular Data on  
your smartphone.  
2
Smartphone user interface (UI) may vary depending  
on the mobile operating system (OS) and the  
manufacturer.  
If the security protocol of the router is set to WEP,  
network setup may fail. Change the security  
protocol (WPA2 is recommended), and register the  
product again.  
Connect your smartphone to the wireless router.  
3
Installing the LG ThinQ Application  
Search for the LG ThinQ application from the Google  
Play Store or Apple App Store on a smart phone.  
Follow instructions to download and install the  
application.  
NOTE  
To verify the Wi-Fi connection, check that Wi-Fi  
icon on the control panel is lit.  
The appliance supports 2.4 GHz Wi-Fi networks  
only. To check your network frequency, contact your  
Internet service provider or refer to your wireless  
router manual.  
LG ThinQ is not responsible for any network  
connection problems or any faults, malfunctions, or  
errors caused by network connection.  
The surrounding wireless environment can make  
the wireless network service run slowly.  
44 SMART FUNCTIONS  
LG ThinQ Application Features  
Dryer Cycle  
Using Inicio Remoto(Remote Start)  
Use a smart phone to control the appliance remotely  
or check to see how much time is left in the cycle.  
Download new and specialized cycles that are not  
included in the standard cycles on the appliance.  
Press the Encendido/Apagado (Power)  
button.  
1
Appliances that have been successfully connected  
can download a variety of specialty cycles specific to  
the appliance.  
Load the laundry.  
2
Only one cycle can be stored on the appliance at a  
time.  
Press and hold the Inicio Remoto(Remote  
Start) button for 3 seconds to enable the Inicio  
Remoto(Remote Start) function.  
3
Once cycle download is completed in the appliance,  
the appliance keeps the downloaded cycle until a  
new cycle is downloaded.  
Start a cycle from the LG ThinQ application on  
your smart phone.  
4
Venting Tips  
Provides venting tips.  
NOTE  
Smart Diagnosis™  
Once the Inicio Remoto(Remote Start) mode is  
enabled, you can start a cycle from the LG ThinQ  
smartphone application. If the cycle is not started,  
the machine will wait to start the cycle until it is  
turned off remotely from the application or the Inicio  
Remoto(Remote Start) mode is disabled.  
This function provides useful information for  
diagnosing and solving issues with the appliance  
based on the pattern of use.  
Energy Monitoring  
The dryer energy usage is affected by the cycles and  
options, so you may see some changes in energy  
usage from one cycle to another.  
If the door is opened, Inicio Remoto(Remote Start)  
is disabled.  
Disabling Inicio Remoto(Remote Start)  
Push Alerts  
When Remote Start is activated, press and hold the  
When the cycle is complete or the appliance has  
problems, you have the option of receiving push  
notifications on a smart phone.  
Inicio Remoto(Remote Start) button for 3 seconds.  
The operation is subject to the following two  
conditions:  
Settings  
Set the product nickname and delete product.  
1) this device may not cause harmful interference  
and  
NOTE  
2) this device must accept any interference received,  
including interference that may cause undesired  
operation of the device.  
To verify the Wi-Fi connection, check that the Wi-Fi  
f icon on the control panel is lit.  
LG ThinQ is not responsible for any network  
connection problems or any faults, malfunctions, or  
errors caused by network connection.  
Open Source Software Notice  
Information  
To obtain the source code under GPL, LGPL, MPL,  
and other open source licenses, that is contained in  
In addition to the source code, all referred license  
terms, warranty disclaimers and copyright notices are  
available for download.  
The machine supports 2.4 GHz Wi-Fi networks only.  
If the appliance is having trouble connecting to the  
Wi-Fi network, it may be too far from the router.  
Purchase a Wi-Fi repeater (range extender) to  
improve the Wi-Fi signal strength.  
The Wi-Fi connection may not connect or may  
be interrupted because of the home network  
environment.  
LG Electronics will also provide open source code  
to you on CD-ROM for a charge covering the cost  
of performing such distribution (such as the cost of  
media, shipping, and handling) upon email request  
to [email protected]. This offer is valid for three  
(3) years from the date on which you purchased the  
product.  
The network connection may not work properly  
depending on the internet service provider.  
The surrounding wireless environment can make  
the wireless network service run slowly.  
This information is current at the time of publication.  
The application is subject to change for product  
improvement purposes without notice to users.  
SMART FUNCTIONS 45  
Press and hold the Temp. button for 3  
seconds or longer while continuing to hold  
your phone near the logo.  
3
4
Smart Diagnosis™ Function  
This feature is only available on models with the c  
or d logo.  
Use this feature to help you diagnose and solve  
problems with your appliance.  
Keep the phone in place untill the tone  
transmission has finished. The display will  
count down the time. Once the countdown  
is over and the tones have stopped, the  
diagnosis will be displayed in the application.  
NOTE  
For reasons not attributable to LGE’s  
negligence, the service may not operate due to  
external factors such as, but not limited to, Wi-Fi  
unavailability, Wi-Fi disconnection, local app  
store policy, or app unavailability.  
NOTE  
For best results, do not move the phone while  
the tones are being transmitted.  
The feature may be subject to change without  
prior notice and may have a different form  
depending on where you are located.  
Using LG ThinQ to Diagnose Issues  
If you experience a problem with your Wi-Fi  
equipped appliance, it can transmit troubleshooting  
data to a smartphone using the LG ThinQ  
application.  
Launch the LG ThinQ application and select the  
Smart Diagnosis™ feature in the menu. Follow  
the instructions provided in the LG ThinQ  
application.  
Using Audible Diagnosis to  
Diagnose Issues  
Follow the instructions below to use the audible  
diagnosis method.  
Launch the LG ThinQ application and select the  
Smart Diagnosis™ feature in the menu. Follow  
the instructions for audible diagnosis provided in  
the LG ThinQ application.  
Press the Encendido/Apagado (Power)  
button to turn on the appliance.  
1
Do not press any other buttons.  
Hold the mouthpiece of your phone in front of  
the c or d logo.  
2
46 MAINTENANCE  
Maintaining Ductwork  
MAINTENANCE  
Regular Cleaning  
Vent ductwork should be checked for lint buildup  
once per month and cleaned at least once per  
year. If any noticeable reduction in airflow or drying  
performance occurs, immediately check ductwork  
for obstructions and blockages. Contact a qualified  
technician or service provider.  
WARNING  
To reduce the risk of fire, electric shock,  
injury to persons, or death when using this  
appliance, follow basic precautions, including  
the following:  
Cleaning the Lint Filter  
Always clean the lint from the filter after every cycle.  
Unplug the dryer before cleaning.  
Never use harsh chemicals, abrasive cleaners,  
or solvents to clean the washer. They will  
damage the finish.  
Cleaning the Exterior  
Lint Filter  
Proper care of your dryer can extend its life. The  
outside of the machine can be cleaned with warm  
water and a mild, nonabrasive household detergent.  
Immediately wipe off any spills with a soft, damp  
cloth.  
To clean the lint filter, open the dryer door and pull  
the lint filter straight up. Then:  
For everyday cleaning, roll any lint off the filter  
1
with your fingers, or  
NOTE  
Do not use methylated spirits, solvents, or similar  
products.  
Never use steel wool or abrasive cleansers; they  
can damage the surface.  
Cleaning the Interior  
Wipe around the door opening and seal with a soft,  
damp cloth to prevent lint and dust buildup that could  
damage the door seal.  
Vacuum the lint filter.  
2
Clean the window with a soft cloth dampened with  
warm water and a mild, nonabrasive household  
detergent, then wipe dry.  
The stainless steel drum can be cleaned with a  
conventional stainless steel cleaner, used according  
to the manufacturer’s specifications. Never use steel  
wool or abrasive cleansers; they may scratch or  
damage the surface.  
If the lint filter has become very dirty or clogged  
with fabric softener, wash the lint filter in warm,  
soapy water and allow it to dry thoroughly before  
reinstalling.  
3
Cleaning Around and Under the  
Dryer  
Vacuum lint and dust from around the dryer and  
underneath it regularly. Vent ductwork should be  
checked for lint buildup and cleaned at least once per  
year. If any noticeable reduction in airflow or drying  
performance occurs, immediately check ductwork for  
obstructions and blockages.  
NOTE  
NEVER operate the dryer without the lint filter in  
place.  
TROUBLESHOOTING 47  
TROUBLESHOOTING  
FAQs: Frequently Asked Questions  
Q:  
When I press a button, why does my dryer beep and then nothing happens?  
A:  
The Bloqueo de Panel(Control Lock) feature is turned on. To turn off  
Bloqueo de Panel(Control Lock), turn the dryer on, then press and hold the button that has  
*Bloqueo de Panel(Control Lock) on or under it for 3 seconds.  
Q:  
Why does my dryer take so long to dry clothes?  
A:  
Proper airflow is critical to the efficient operation of clothes dryers. A lint filter which is full of lint or  
clogged with fabric softener sheet residue can reduce the airflow to the point that the time required  
to dry clothing will be greatly increased. Another factor affecting dry time is your home exhaust  
system. An exhaust system which is dirty and clogged with lint, or is excessively long, needs to be  
professionally cleaned or repaired.  
Q:  
Why does my dryer start by itself every few minutes?  
A:  
This is how the Anti Arrugas(Wrinkle Care) feature works. The dryer runs briefly every few minutes  
for up to 3 hours after the cycle finishes. This feature is designed to help prevent wrinkles from  
setting in when the dryer is not unloaded immediately after the cycle is finished.  
Q:  
Why does my dryer show 3 minutes when I select the Steam Fresh™ cycle?  
A:  
When the Steam Fresh™ cycle is selected, the dryer displays the recommended number of garments  
for the cycle, not the estimated cycle time, until the cycle is started. Use the Más Tiempo(More  
Time) or Menos Tiempo(Less Time) buttons to adjust the load size setting for the number of  
garments you desire. For a large load or single bulky item use the  
(big) setting.  
User Support Videos  
For further assistance, there are videos and tutorials available  
through the LG.com website.  
On the lg.com/us home page, click on the Support menu tab  
to bring up the menu selections. Select Video Tutorials.  
1
Scan this QR code to quickly access the  
video search page on the LG website.  
Type Dryer in the search box on the new page and click the  
Search button.  
2
48 MAINTENANCE  
Before Calling for Service  
This dryer is equipped with an automatic error-monitoring system to detect and diagnose problems at an early  
stage. If the dryer does not function properly or does not function at all, check the following before you call for  
service.  
Operation  
Problem  
Possible Cause  
Solutions  
After clearing the restriction,  
the Flow Sense™ system  
requires multiple, consecutive If the Flow Sense™ indicator remains active for more  
The Flow Sense™  
indicator remains  
active after clearing cycles to determine that  
than five cycles after the restriction has been cleared,  
call for service.  
the restriction in  
the venting.  
the performance value has  
improved before the Flow  
Sense™ indicator is reset.  
Power cord is not properly  
plugged in.  
Make sure that the plug is securely plugged into a  
grounded outlet matching the dryer’s rating plate.  
Dryer will not turn  
on  
House fuse is blown, circuit  
breaker has tripped, or power  
outage has occurred.  
Reset circuit breaker or replace fuse. Do not increase  
fuse capacity. If the problem is a circuit overload, have  
it corrected by a qualified electrician.  
Reset circuit breaker or replace fuse. Do not increase  
fuse capacity. If the problem is a circuit overload, have  
it corrected by a qualified electrician.  
House fuse is blown, circuit  
breaker has tripped, or power  
outage has occurred.  
NOTE: Due to the design of electric dryers, it is  
possible for a circuit problem to allow an electric dryer  
to run without heat.  
Confirm that the house gas shutoff and the dryer gas  
shutoff valves are both fully open. Even if gas is not  
supplied to the dryer, it will run and no error codes will  
display. Verify that other gas appliances in the home  
are working normally.  
Gas supply or service is  
turned off.  
Dryer does not heat  
If using the Normal cycle, deselect the Ahorro de  
Energía (Energy Saver) option. The Ahorro de Energía  
(Energy Saver) option is selected by default. This  
option reduces energy use by adding an air dry section  
to the beginning of the cycle. It is normal to feel no heat  
at the beginning of the cycle while in Ahorro de Energía  
(Energy Saver) mode.  
AHORRO DE ENERGÍA  
(ENERGY SAVER) option  
selected (on some models)  
Confirm that the exhaust duct is properly configured  
and free of debris, lint, and obstructions. Make sure that  
outside wall dampers can open properly and are not  
blocked, jammed, or damaged.  
Exhaust ducts are blocked,  
dirty, or duct run is too long.  
Clothes take too  
long to dry  
Separate heavy items from lightweight items. Larger  
and heavier items take longer to dry. Light items in a  
load with heavy items can fool the sensor because the  
light items dry faster.  
Load is not properly sorted.  
Electric dryer power cord  
Display shows error is not connected correctly,  
Check the power supply or the connection of the power  
code nP  
or house power supply is  
incorrect.  
cord to the terminal block.  
Display shows error Gas supply or service turned  
code gAS off (gas models only).  
Confirm that house gas shutoff and the dryer gas  
shutoff are both fully open.  
MAINTENANCE 49  
Problem  
Possible Cause  
Solutions  
Heavy fabrics take longer to dry because they tend  
to retain more moisture. To help reduce and maintain  
more consistent drying times for large and heavy  
fabrics, separate these items into smaller loads of a  
consistent size.  
Large load of heavy fabrics.  
Use the appropriate control settings for the type of load  
you are drying. Some loads may require an adjustment  
of the dry level setting for proper drying.  
Dryer controls are not set  
properly.  
Remove the lint from the filter before every load. With  
the lint removed, hold the filter up to a light to see if it  
is dirty or clogged. With some loads that produce high  
amounts of lint, such as new bath towels, it may be  
necessary to pause the cycle and clean the filter during  
the cycle.  
Lint filter needs to be cleaned.  
Reset circuit breaker or replace fuse. Do not increase  
fuse capacity. If the problem is a circuit overload, have  
it corrected by a qualified electrician.  
Clothes take too  
long to dry  
House fuse is blown, circuit  
breaker has tripped, or power  
outage has occurred.  
NOTE: Due to the design of electric dryers, it is  
possible for a circuit problem to allow an electric dryer  
to run without heat.  
Divide extra large loads into smaller loads for better  
drying performance and efficiency.  
Dryer is overloaded.  
Dryer is underloaded.  
If you are drying a very small load, add a few extra  
items to ensure proper tumbling action. If the load  
is very small and you are using SENSOR DE  
SECADO(SENSOR DRY) cycles, the electronic control  
cannot properly sense the dryness of the load and may  
shut off too soon. Use Tiempo de Secado(TIME DRY)  
or add some extra wet clothes to the load.  
If using the Normal cycle, deselect the Ahorro de  
Energía (Energy Saver) option. This option reduces  
energy use by adding an air dry section to the  
beginning of the cycle.  
AHORRO DE ENERGÍA  
(ENERGY SAVER) option  
selected (on some models)  
The drying time for a load will vary depending on the  
type of heat used (electric, natural gas, or LP gas),  
the size of the load, the type of fabrics, the wetness of  
the clothes, and the condition of the exhaust duct and  
lint filter. Even an unbalanced load in the washer can  
cause poor spinning, resulting in wetter clothes which  
will take longer to dry.  
Heat settings, load size, or  
dampness of clothing is not  
consistent.  
Drying time is not  
consistent  
50 MAINTENANCE  
Performance  
Problem  
Possible Cause  
Solutions  
Fabric softener used  
incorrectly.  
Confirm and follow the instructions provided with your  
fabric softener.  
Use your dryer to dry only clean items. Soil from dirty  
clothes can transfer to the clean clothes in the same or  
later loads.  
Clean and dirty clothes are  
being dried together.  
Greasy or dirty  
Stains on dried clothes could be stains that were not  
removed during the washing process. Make sure  
that clothes are being completely cleaned or rinsed  
according to the instructions for your washer and  
detergent. Some difficult soils may require pre-treating  
prior to washing.  
spots on clothes  
Clothes were not properly  
cleaned or rinsed before being  
placed in the dryer.  
Over drying a load of laundry can lead to wrinkled  
clothes. Try a shorter drying time or Menos Seco(Less  
Dry) setting and remove items while they still retain a  
slight amount of moisture.  
Clothes dried too long (over  
dried).  
Clothes are  
wrinkled  
Use the Anti Arrugas(Wrinkle Care) option. This feature  
will tumble the clothes briefly every few minutes for up  
to 3 hours to help prevent wrinkling.  
Clothes left in dryer too long  
after cycle ends.  
To avoid shrinking your clothes, always consult and  
follow fabric care instructions. Some fabrics will  
naturally shrink when washed. Other fabrics can be  
washed but will shrink when dried in a dryer. Use a low  
or no heat setting.  
Clothes are  
shrinking  
Garment care instructions are  
not being followed.  
Remove the lint from the filter before every load. With  
the lint removed, hold the filter up to a light to see if it  
is dirty or clogged. If it looks dirty, follow the cleaning  
instructions. With some loads that produce high  
amounts of lint, it may be necessary to clean the filter  
during the cycle.  
Lint filter not cleaned properly.  
Laundry not sorted properly.  
Some fabrics are lint producers (i.e., a fuzzy white  
cotton towel) and should be dried separately from  
clothes that are lint trappers (i.e., a pair of black linen  
pants).  
Lint on clothes  
Use a fabric softener to reduce static electricity. Be sure  
to follow the manufacturer’s instructions. Overdrying a  
load of laundry can cause a buildup of static electricity.  
Adjust settings and use a shorter drying time, or use  
SENSOR DE SECADO(SENSOR DRY) cycles.  
Excess static in clothes.  
Dryer is overloaded.  
Divide extra large loads into smaller loads for drying.  
Tissue, paper, etc., left in  
pockets.  
Check pockets thoroughly before washing and drying  
clothes.  
MAINTENANCE 51  
Problem  
Possible Cause  
Solutions  
Use a fabric softener or the Reducir Estática(Reduce  
Static) option, if equipped, to reduce static electricity.  
Be sure to follow the manufacturer’s instructions.  
Fabric softener is not used or  
used incorrectly.  
Overdrying a load of laundry can cause a buildup of  
static electricity. Adjust settings and use a shorter  
drying time, or use SECADO MANUAL(MANUAL DRY)  
cycles. Select a Menos Seco setting on SENSOR DE  
SECADO(SENSOR DRY) cycles, if necessary.  
Excess static in  
clothes after drying (overdried).  
Clothes dried too long  
These fabrics are naturally more prone to static buildup.  
Try using fabric softener, or use LESS DRY and/or  
shorter Tiempo de Secado(TIME DRY) time settings.  
Drying synthetics, permanent  
press, or synthetic blends.  
If items are too tightly packed or too sparse the sensor  
may have trouble reading the dryness level of the load.  
Use a Tiempo de Secado(TIME DRY) cycle for very  
small loads.  
Large, bulky items such as blankets or comforters can  
sometimes wrap themselves into a tight ball of fabric.  
The outside layers will dry and register on the sensors,  
while the inner core remains damp. When drying a  
single bulky item, it may help to pause the cycle once  
or twice and rearrange the item to unwrap and expose  
any damp areas.  
Clothes have  
damp spots after a  
Sensor Dry cycle.  
Very large load or very small  
load.Single large item such as  
a blanket or comforter.  
To dry a few remaining damp items from a very large  
load or a few damp spots on a large item after a sensor  
cycle has completed, empty the lint trap, then set a  
Tiempo de Secado(TIME DRY) cycle to finish drying  
the item(s).  
The password for the Wi-  
Fi network was entered  
incorrectly.  
Delete your home Wi-Fi network and begin the  
registration process again.  
Mobile data for your  
Turn off the Mobile data on your smartphone before  
smartphone is turned on.  
registering the appliance.  
The wireless network name (SSID) should be a  
combination of English letters and numbers. (Do not  
use special characters.)  
The wireless network name  
Trouble connecting (SSID) is set incorrectly.  
appliance and  
Only a 2.4 GHz router frequency is supported. Set the  
wireless router to 2.4 GHz and connect the appliance  
to the wireless router. To check the router frequency,  
check with your Internet service provider or the router  
manufacturer.  
smartphone to Wi-  
Fi network  
The router frequency is not 2.4  
GHz.  
If the appliance is too far from the router, the signal  
may be weak and the connection may not be  
configured correctly. Move the router closer to the  
appliance or purchase and install a Wi-Fi repeater.  
The appliance is too far from  
the router.  
52 MAINTENANCE  
Steam Functions (Steam Models)  
Problem  
Possible Cause  
Solutions  
This is steam condensation. The  
dripping water will stop after a short  
time.  
Water drips from nozzle when  
STEAM CYCLE starts  
This is normal.  
Small loads of 1 to 5 items work best.  
Load fewer garments. Load similar  
types of garments.  
Garments still wrinkled after Steam  
Fresh™  
Too many or overly different  
types of garments in dryer.  
Creases or pleats are gone from  
garments after Steam Fresh™  
The function of this cycle is to Use an iron to replace creases and  
remove wrinkles from fabric.  
pleats in garments.  
The amount of static experienced will  
depend on the individual moisture  
level in the skin.  
Garments have static after using the  
Reduce Static option  
This is normal.  
Select the load weight manually  
before starting the Reducir  
Estática(Reduce Static) option.  
Garments are too damp or too dry  
after using the Reduce Static option selected.  
Correct drying options not  
Steam does not generate, but no  
error code is shown  
Water level error.  
Unplug dryer and call for service.  
Condensation will normally form on  
the inside of the dryer door during  
steam operation. Some condensation  
may drip out the bottom of the door.  
Water drips from door during  
STEAM CYCLE  
This is normal.  
This is normal.  
Steam vapor is difficult to see  
when the door is closed. However,  
condensation will normally form on  
the inside of the dryer door if the  
steam system is operating normally.  
Steam is not visible during STEAM  
CYCLE  
The drum is turned off so that the  
steam vapor remains in the drum.  
The drum will normally turn for about  
2 seconds once a minute.  
Drum does not turn during STEAM  
CYCLE  
This is normal.  
This is normal.  
Cannot see steam vapor at the  
beginning of cycle  
Steam is released at different stages  
of the cycle for each option.  
Odors remain in clothing after  
Steam Fresh™  
Steam Fresh™ did not remove Fabrics containing strong odors  
odor completely. should be washed in a normal cycle.  
MAINTENANCE 53  
Error Codes  
Problem  
Possible Cause  
Solutions  
Turn off the dryer and call for service.  
Temperature sensor  
failure.  
Error code: tE1 through tE7  
Display shows error code: PS  
Power cord is connected Check the connection of the power cord to  
incorrectly.  
the terminal block.  
Exhaust system is too  
long or has too many  
turns/restrictions.  
Install a shorter or straighter duct run. See  
the Installation Instructions for details.  
*Flow Sense™ indicator shows  
four bars during the drying cycle  
or the display shows "d80" after  
drying  
Partial blockage of the  
ductwork due to lint  
buildup or other foreign  
object.  
Ductwork should be checked/cleaned  
immediately. Dryer can be used in this  
condition, but drying times will be longer and  
energy consumption will increase.  
* This warning light is not a dryer  
failure and is not covered by the  
dryer warranty. Contact a duct  
cleaning service to set up an  
appointment to have your exhaust  
system cleaned and inspected.  
If exhaust restrictions are sensed by the Flow  
Sense™ system, the indicator will remain  
on for 2 hours after the end of the cycle.  
Opening the door or pressing the Encendido/  
Apagado (Power) button will turn off the  
display.  
The appliance has  
detected a restriction  
in the external dryer  
venting.  
After clearing the  
restriction, the Flow  
Sense™ system requires  
multiple, consecutive  
cycles to determine that  
the performance value  
has improved before the  
Flow Sense™ indicator  
is reset.  
The Flow Sense™ indicator  
remains active after clearing the  
restriction in the venting.  
If the Flow Sense™ indicator remains active  
for more than five cycles after the restriction  
has been cleared, call for service.  
This display indicates that the steam option  
has been set for a “big” item such as a  
comforter.  
Press the Menos tiempo(Less Time) button to  
reduce the indicated load size.  
Más tiempo(More Time)  
button was pressed.  
The display shows  
Do not use the dryer until the exhaust system  
has been cleaned and/or repaired. Using the  
dryer with a severely restricted exhaust is  
dangerous and could result in a fire or other  
property damage.  
Check the outside dryer vent while the dryer  
is operating to make sure there is strong  
airflow.  
The duct work is about  
80% - 95% blocked.  
(“d80”, “d90” or “d95”  
error code is displayed  
for 2 hours only)  
The display shows  
If the exhaust system is extremely long, have  
it repaired or rerouted.  
Keep the area around the dryer clean and  
free of clutter.  
Check vent hood for damage or lint clogging.  
Make sure the area around the vent hood is  
clear.  
House exhaust system  
blocked.  
Remove the lint from the filter before every  
load. With the lint removed, hold the filter up  
to a light to see if it is dirty or clogged. If it  
looks dirty, follow the cleaning instructions.  
With some loads that produce high amounts  
of lint, it may be necessary to clean the filter  
during the cycle.  
Limpieza de Filtro(Check Filter)  
indicator is on during the drying  
cycle  
Lint filter not cleaned  
properly.  
54 MEMO  
MEMO 55  

Toshiba Mmk Ap0122h User Manual
Savin 2245 User Manual
LG LG P999 User Manual
FUJITSU FI 5000N User Manual
D LINK AC3200 DIR 890L User Manual
DELL C5522QT User Manual
CRAFTSMAN 315.275000 User Manual
BROTHER FAX 202 User Manual
ASUS ZX752V User Manual
ASUS TUF Z390M PRO GAMING User Manual