OWNER’S MANUAL
Network 3D
Blu-ray Disc™ / DVD Player
Please read this manual carefully before operating
your set and retain it for future reference.
BP430
P/NO : MFL67475831_1.0
Getting Started
3
Safety Information
CAUTION
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
1
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
4
Getting Started
This device is equipped with a portable battery or
accumulator.
Notes on Copyrights
Because AACS (Advanced Access Content
System) is approved as content protection
system for Blu-ray Disc format, similar to use of
CSS (Content Scramble System) for DVD format,
certain restrictions are imposed on playback,
analog signal output, etc., of AACS protected
contents. The operation of this product and
restrictions on this product may vary depending
on your time of purchase as those restrictions
may be adopted and/or changed by AACS after
the production of this product.
y
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
1
Furthermore, BD-ROM Mark and BD+ are
y
additionally used as content protection systems
for Blu-ray Disc format, which imposes certain
restrictions including playback restrictions for
BD-ROM Mark and/or BD+ protected contents.
To obtain additional information on AACS, BD-
ROM Mark, BD+, or this product, please contact
an authorized Customer Service Center.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
y
y
This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Rovi Corporation.
Reverse engineering or disassembly is prohibited.
Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
y
Getting Started
5
Caution
Watching a 3D content for a long period
time may cause dizziness or tiredness.
Important Notice for TV color system >
y
y
The color system of this player differs according to
currently playing discs.
It is not recommended to watch a movie
in 3D mode for infirm, child and pregnant
woman.
For example, when the player plays the disc
recorded in the NTSC color system, the image is
output as an NTSC signal.
1
If you are experiencing headache, tiredness
or dizziness while viewing contents in 3D,
it is strongly recommended to stop the
playback and rest until you feel normal.
y
Only the multi system color TV can receive all
signals output from the player.
If you have a PAL color system TV, you will see
just distorted images when using discs or video
contents recorded in NTSC.
y
The multi system color TV changes the color
system automatically according to input signals.
In case that the color system is not changed
automatically, turn it off and then on to see
normal images on screen.
y
Even if the disc recorded in NTSC color system
are well displayed on your TV, these may not be
recorded correctly on your recorder.
y
6
Table of Contents
4
Operating
Table of Contents
28 Home Menu Display
28 – Using [HOME] menu
28 – Using the Smart Share
29 Playing the Linked Devices
29 – Playing a disc
29 – Playing Blu-ray 3D disc
30 – Playing a file on disc/USB device
31 – Playing a file on a network server
32 Using Home Network Server for PC
32 – About Nero MediaHome 4 Essentials
32 – Installing Nero MediaHome 4
Essentials
33 – Sharing files and folders
33 – System requirements
34 General Playback
34 – Basic operations for video and audio
content
1
Getting Started
3
8
8
Safety Information
Introduction
– Playable discs and symbols used in
this manual
– About the “7” symbol display
– Regional code
9
9
9
9
– System select
– LG AV Remote
10 Remote Control
11
11
Front Panel
Rear Panel
2
Connecting
34 – Basic operations for photo content
34 – Using the disc menu
35 – Resume playback
35 – Last Scene Memory
36 On-Screen Display
36 – To control video playback
37 – To control photo view
38 Advanced Playback
12
Connecting to Your TV
13 – What is SIMPLINK?
13 – Resolution setting
14
15 – Connecting to an amplifier via HDMI
output
15 – Connecting to an amplifier via digital
audio output
Connecting to an Amplifier
38 – Repeat playback
38 – Repeating a specific portion
38 – Playing from selected time
39 – Selecting a subtitle language
39 – Hearing a different audio
39 – Watching from a different angle
39 – Changing the TV Aspect Ratio
40 – Changing subtitle Code Page
40 – Changing the Picture Mode
40 – Viewing content information
41 – Changing content list view
41 – Selecting a subtitle file
42 – Listening to music during slide show
42 – Setting the [3D] option
43 Advanced Features
16
Connecting to your Home Network
16 – Wired network connection
16 – Wired network setup
3
System Setting
19
Initial Setup
20 Settings
20 – Adjust the setup settings
20 – [NETWORK] menu
21 – [DISPLAY] menu
23 – [LANGUAGE] menu
23 – [AUDIO] menu
25 – [LOCK] menu
43 – Enjoying BD-Live™
44 – Audio CD recording
26 – [OTHERS] menu
45 Using the Premium
45 Using the LG Smart World
46 – Signing in
Table of Contents
7
46 – Searching online content
47 Using the My Apps Menu
5
Troubleshooting
1
48 Troubleshooting
48 – General
49 – Network
50 – Picture
50 – Customer support
50 – Open source software notice
2
3
4
5
6
6
Appendix
51
Controlling a TV with the Supplied
Remote Control
51 – Setting up the remote to control your
TV
52 Network Software Update
52 – Network update notification
52 – Software update
54 Additional Information
54 – File requirement
55 – AVCHD (Advanced Video Codec High
Definition)
56 – About DLNA
56 – Certain system requirements
56 – Compatibility notes
57 Audio Output Specifications
59 Area Code List
60 Language Code List
61
Trademarks and Licenses
63 Specifications
64 Maintenance
64 – Handling the unit
64 – Notes on discs
65 Important Information Relating to
Network Services
Some of the content in this manual may differ from your player depending on the software of the
player or your service provider.
8
Getting Started
Introduction
1
Playable discs and symbols used in this manual
Media/Term
Logo
Symbol
Description
Discs such as movies that can be purchased or
rented.
y
e
“Blu-ray 3D”discs and“Blu-ray 3D ONLY”discs.
BD-R/RE discs that are recorded in BDAV format.
y
y
Blu-ray
BD-R/RE discs that contain Movie, Music or
Photo files.
y
y
u
i
ISO 9660+JOLIET, UDF and UDF Bridge format
y
Discs such as movies that can be purchased or
rented.
y
r
Movie mode and finalized only
Supports the dual layer disc also
y
y
DVD-ROM
DVD-R
Finalized AVCHD format
DVD-RW
DVD+R
o
DVD+RW
(8 cm, 12 cm)
DVD R/RW discs that contain Movie, Music or
Photo files.
y
y
y
u
i
ISO 9660+JOLIET, UDF and UDF Bridge format
DVD-RW (VR)
(8 cm, 12 cm)
VR mode and finalized only
Audio CD
r
t
Audio CD
(8 cm, 12 cm)
CD-R/RW discs that contain Movie, Music or
Photo files.
y
y
y
u
i
CD-R/RW
(8 cm, 12 cm)
ISO 9660+JOLIET, UDF and UDF Bridge format
Indicates special notes and operating features.
Note
–
–
,
>
Indicates cautions for preventing possible
damages from abuse.
Caution
Getting Started
9
Note
,
About the “ ” symbol display
7
Depending on the conditions of the
recording equipment or the CD-R/RW (or
DVD R/RW) disc itself, some CD-R/RW (or
DVD R/RW) discs cannot be played on the
unit.
y
“7”may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that
specific media.
1
Depending on the recording software & the
finalization, some recorded discs (CD-R/RW,
DVD R/RW, BD-R/RE) may not be playable.
y
y
Regional code
This unit has a regional code printed on the rear of
the unit. This unit can play only BD-ROM or DVD
discs labelled same as the rear of the unit or“ALL”.
BD-R/RE, DVD R/RW and CD-R/RW discs
recorded using a personal computer or a
DVD or CD Recorder may not play if the
disc is damaged or dirty, or if there is dirt or
condensation on the player’s lens.
System select
Open the disc tray using the B(OPEN/CLOSE)
button and then, press and hold M(PAUSE) for
more than five seconds to change the color system
(PAL /NTSC /AUTO).
If you record a disc using a personal
computer, even if it is recorded in a
compatible format, there are cases in which
it may not play because of the settings of
the application software used to create the
disc. (Check with the software publisher for
more detailed information.)
y
LG AV Remote
You can control this player with your iPhone
or Android phone via your home network. This
player and your phone must be connected to your
wireless network device such as access point. Visit
“Apple iTunes”or“Google Android Market (Google
Play Store)”for detailed information of“LG AV
Remote”.
This player requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality.
y
y
Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions
to ensure compatible playback.
Customers should note that permission
is required in order to download MP3 /
WMA files and music from the Internet.
Our company has no right to grant such
permission. Permission should always be
sought from the copyright owner.
y
y
You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the LG players when
formatting rewritable discs. When setting
the option to Live System, you cannot use
it on LG player. (Mastered/Live File System :
Disc format system for windows Vista)
10 Getting Started
Remote Control
• • • • • • a • • • • • •
• • • • • • d • • • • •
1
1(POWER): Switches the player Colored (R, G, Y, B) buttons: Use
ON or OFF.
to navigate BD-ROM menus. They
are also used as shortcut buttons
for specific menus.
B(OPEN/CLOSE): Opens and
closes the disc tray.
TV Control Buttons: See page
0-9 numerical buttons: Selects
numbered options in a menu.
CLEAR: Removes a number when
setting the password or network
connection.
REPEAT (h): Repeats a desired
section or sequence.
• • • • • • b • • • • •
c/v(SCAN): Searches
backward or forward.
C/V(SKIP): Goes to the
next or previous chapter / track /
file.
Z(STOP): Stops playback.
d(PLAY): Starts playback.
M(PAUSE): Pauses playback.
• • • • • • c • • • • •
HOME ( ): Displays or exits the
[Home].
Battery Installation
TITLE/POPUP: Displays the DVD
title menu or BD-ROM’s pop-up
menu, if available.
INFO/MENU (m): Displays or
exits On-Screen Display.
Direction buttons: Selects an
option in the menu.
Remove the battery cover on the
rear of the remote control, and
insert a R03 (size AAA) battery
with 4and 5matched correctly.
ENTER (b): Acknowledges menu
selection.
BACK (1): Exits the menu or
returns to the previous screen.
?: This button is not available.
DISC MENU: Accesses menu on a
disc.
Getting Started 11
Front Panel
1
a Disc Tray
e N(PLAY / PAUSE)
f Z(STOP)
b Display Window
c Remote Sensor
d B(OPEN / CLOSE)
g 1/!(POWER)
h USB Port
Rear Panel
a AC power cord
c HDMI OUT
b LAN port
d DIGITAL AUDIO OUT (COAXIAL)
12 Connecting
Additional Information for HDMI
Connecting to Your TV
If you have a HDMI TV or monitor, you can connect
it to this player using a HDMI cable (Type A, High
Speed HDMI™ Cable). Connect the HDMI jack on
the player to the HDMI jack on a HDMI compatible
TV or monitor.
When you connect a HDMI or DVI compatible
device make sure of the following:
y
-
Try switching off the HDMI/DVI device and
this player. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this player.
-
-
The connected device’s video input is set
correctly for this unit.
2
Rear of the unit
The connected device is compatible with
720x576p, 1280x720p, 1920x1080i or
1920x1080p video input.
Not all HDCP-compatible HDMI or DVI devices
will work with this player.
y
-
The picture will not be displayed properly
with non-HDCP device.
HDMI
cable
Note
,
If a connected HDMI device does not accept
y
TV
the audio output of the player, the HDMI
device’s audio sound may be distorted or
may not output.
When you use HDMI connection, you can
change the resolution for the HDMI output.
y
y
Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
Select the type of video output from the
HDMI OUT jack using [HDMI Color Setting]
option on the [Settings] menu (see page
Note
,
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make
the best connections.
Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn off the player and then turn it
on again.
y
When the HDMI connection with HDCP
is not verified, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
y
y
If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m).
Connecting 13
What is SIMPLINK?
Resolution setting
The player provides several output resolutions for
HDMI OUT jack. You can change the resolution
using [Settings] menu.
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
1. Press HOME ( ).
2. Use A/Dto select the [Settings] and press
ENTER (b). The [Settings] menu appears.
Controllable functions by LG TV’s remote control;
Play, Pause, Scan, Skip, Stop, Power Off, etc.
3. Use W/Sto select [DISPLAY] option then
press Dto move to the second level.
Refer to the TV owner’s manual for the details of
SIMPLINK function.
2
4. Use W/Sto select the [Resolution] option
then press ENTER (b) to move to the third level.
LG TV’s with SIMPLINK function has the logo as
shown above.
Note
,
Depending on the disc type or playing status,
some SIMPLINK operation may differ from your
purpose or not work.
5. Use W/Sto select the desired resolution then
press ENTER (b) to confirm your selection.
14 Connecting
Note
,
Connecting to an
Amplifier
Make one of the following connections, depending
on the capabilities of your existing equipment.
If your TV does not accept the resolution
y
you have set on the player, you can set
resolution to 576p as follows:
1. Press Bto open the disc tray.
2. Press Z(STOP) for more than 5 seconds.
If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
y
y
HDMI Audio connection (page 15)
Digital Audio connection (page 15)
y
y
Since many factors affect the type of audio output,
see“Audio Output Specifications”for details (page
2
If you select a resolution that your TV
does not accept, the warning message
will appear. After resolution change,
if you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
About Digital Multi-channel sound
A digital multi-channel connection provides the
best sound quality. For this, you need a multi-
channel Audio/Video Receiver that supports one
or more of the audio formats supported by your
player. Check the logos on the front of the Audio/
Video receiver and the manual. (PCM Stereo, PCM
Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS and/or DTS-HD)
The 1080p video output frame rate may
be automatically set to either 24 Hz or
50 Hz depending both on the capability
and preference of the connected TV and
based on the native video frame rate of the
content on the BD-ROM disc.
y
Connecting 15
Connecting to an amplifier via
HDMI output
Connect the player’s HDMI OUT jack to the
corresponding in jack on your amplifier using a
HDMI cable.
Connecting to an amplifier via
digital audio output
Connect the player’s COAXIAL OUT jack to the
corresponding in jack on your amplifier using an
optional digital audio cable.
Rear of the unit
Rear of the unit
2
Coaxial
cable
HDMI cable
Receiver/Amplifier
HDMI cable
Receiver/Amplifier
You will need to activate the player’s digital output.
TV
Connect the amplifier’s HDMI output jack to HDMI
input jack on your TV using a HDMI cable if your
amplifier has HDMI output jack. (Refer to amplifier’s
owner’s manual)
You will need to activate the player’s digital output.
16 Connecting
Connecting to your
Home Network
Broadband
service
This player can be connected to a local area
network (LAN) via the LAN port on the rear panel.
By connecting the unit to a broadband home
network, you have access to services such as
software updates, BD-Live interactivity and on-line
content services.
2
Router
Wired network connection
Using a wired network provides the best
performance, because the attached devices
connect directly to the network and are not subject
to radio frequency interference.
Please refer to the documentation for your network
device for further instructions.
DLNA certified servers
Connect the player’s LAN port to the corresponding
port on your Modem or Router using a
commercially available LAN or Ethernet cable.
Note
,
When plugging or unplugging the LAN
cable, hold the plug portion of the cable.
When unplugging, do not pull on the LAN
cable but unplug while pressing down on
the lock.
y
Rear of the unit
Do not connect a modular phone cable to
the LAN port.
y
y
Wired network setup
Since there are various connection
configurations, please follow the
specifications of your telecommunication
carrier or internet service provider.
If there is a DHCP server on the local area network
(LAN) via wired connection, this player will
automatically be allocated an IP address. After
making the physical connection, a small number of
home networks may require the player’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.
If you want to access content from DLNA
servers, this player must be connected to
the same local area network with them via a
router.
y
y
To set your PC as a DLNA server, install the
Nero MediaHome 4 on your PC. (see page
32)
Preparation
Before setting the wired network, you need to
connect the broadband internet to your home
network.
Connecting 17
1. Select [Connection Setting] option in the
Advanced Setting
If you want to set the network settings manually,
use W/Sto select [Advanced Setting] on the
[Network Setting] menu and press ENTER (b).
[Settings] menu then press ENTER (b).
1. Use W/S/A/Dto select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
2
2. Read the preparations for the network settings
and then press ENTER (b) while [Start] is
highlighted.
Note
,
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using
Network will automatically be connected to the
unit.
W/S/A/Dand numerical buttons. If you
make a mistake while entering a number, press
CLEAR to clear the highlighted part.
2. Select [Next] and press ENTER (b) to apply
network settings.
Network connection status is displayed on the
screen.
3. Press ENTER (b) while [OK] is highlighted to
finish the wired network settings.
18 Connecting
subscriber agreement with your ISP, you may not
be able to use the internet connection feature
contained in this player or you may be limited
to the number of devices you can connect at
the same time. (If your ISP limits subscription to
one device, this player may not be allowed to
connect when a PC is already connected.)
Notes on network connection
Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the player
to the home network, quickly power off and/
or disconnect the power cable of the home
network router or cable modem. Then power on
and/or connect the power cable again.
y
The use of a“Router”may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
y
Depending on the internet service provider (ISP),
the number of devices that can receive internet
service may be limited by the applicable terms
of service. For details, contact your ISP.
y
y
2
Our company is not responsible for any
malfunction of the player and/or the internet
connection feature due to communication
errors/malfunctions associated with your
broadband internet connection, or other
connected equipment.
The features of BD-ROM discs made available
through the Internet Connection feature are not
created or provided by our company, and our
company is not responsible for their functionality
or continued availability. Some disc related
material available by the Internet Connection
may not be compatible with this player. If you
have questions about such content, please
contact the producer of the disc.
y
Some internet contents may require a higher
bandwidth connection.
y
y
Even if the player is properly connected and
configured, some internet contents may not
operate properly because of internet congestion,
the quality or bandwidth of your internet service,
or problems at the provider of the content.
Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
broadband Internet connection.
y
Any fees charged by an ISP including, without
limitation, connection charges are your
responsibility.
y
y
A 10 Base-T or 100 Base-TX LAN port is required
for wired connection to this player. If your
internet service does not allow for such a
connection, you will not be able to connect the
player.
You must use a Router to use xDSL service.
y
y
A DSL modem is required to use DSL service and
a cable modem is required to use cable modem
service. Depending on the access method of and
System Setting 19
4. Check all the settings that you have set in the
previous steps.
Initial Setup
When you turn on the unit for the first time, the
initial setup wizard appears on the screen. Set the
display language and network settings on the initial
setup wizard.
1. Press 1(POWER).
The initial setup wizard appears on the screen.
Press ENTER (b) while [Finish] is highlighted
to finish the initial setup settings. If there is any
settings to be changed, use W/S/A/Dto
select 1 and press ENTER (b).
2. Use W/S/A/Dto select a display language
and press ENTER (b).
3
3. Read and prepare the preparations for the
network settings and then press ENTER (b)
while [Start] is highlighted.
If wired network is connected, the network
connection setting will automatically be
finished.
For details on network settings, refer to
“Connecting to your Home Network”on page
20 System Setting
[NETWORK] menu
The [NETWORK] settings are needed to use the
software update, BD-Live and on-line content
services.
Settings
Adjust the setup settings
You can change the settings of the player in the
[Settings] menu.
Connection Setting
If your home network environment is ready
to connect the player, the player needs to be
set the wired network connection for network
communication. (See“Connecting to your Home
1. Press HOME ( ).
Connection Status
If you want to check tshe network status on this
player, select the [Connection Status] options and
press ENTER (b) to check whether a connection
to the network and the internet have been
established.
3
2. Use A/Dto select the [Settings] and press
ENTER (b). The [Settings] menu appears.
BD-LIVE connection
You can restrict Internet access when BD-Live
functions are used.
[Permitted]
Internet access is permitted for all BD-Live
contents.
3. Use W/Sto select the first setup option, and
press Dto move to the second level.
[Partially permitted]
Internet access is permitted only for BD-
Live contents which have content owner
certificates. Internet access and AACS Online
functions are prohibited for all BD-Live contents
without a certificate.
[Prohibited]
4. Use W/Sto select a second setup option, and
Internet access is prohibited for all BD-Live
contents.
press ENTER (b) to move to the third level.
5. Use W/Sto select a desired setting, and press
ENTER (b) to confirm your selection.
System Setting 21
Smart Service Setting
[DISPLAY] menu
[Country Setting]
TV Aspect Ratio
Select a TV aspect ratio option according to your TV
type.
Select your area for displaying proper online
content service.
[Initialize]
[4:3 Letter Box]
Depending on the region, [Initialize] function
may not be available.
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars
above and below the picture.
Device Name
You can make a network name using virtual
keyboard. This player will be recognised by the
name you are entering on your home network.
[4:3 Pan Scan]
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
3
Network Play
[16:9 Original]
This function allows you to control the playback
of media streamed from DLNA media server by a
DLNA certified smartphone. Most DLNA certified
smartphone has a function to control the playback
media on your home network. Set this option to
[On] for allowing your smartphone to control this
unit. Refer to instructions of your DLNA certified
smartphone or the application for more detailed
information.
Select when a 16:9 wide TV is connected. The
4:3 picture is displayed with an original 4:3
aspect ratio, with black bars appearing at the
left and right sides.
[16:9 Full]
Select when a 16:9 wide TV is connected. The
4:3 picture is adjusted horizontally (in a linear
proportion) to fill the entire screen.
Note
,
Note
,
This unit and the DLNA Certified
Smartphone must be connected to the
same network.
y
y
You cannot select [4:3 Letter Box] and
[4:3 Pan Scan] option when the resolution is
set to higher than 720p.
To use the [Network Play] function using a
DLNA certified smartphone, press HOME
(
) to display the home menu before
connecting to this unit.
While controlling the unit using the
[Network Play] function, the remote control
may not work.
y
y
Available file formats described on page
54 are not always supported on [Network
Play] function.
22 System Setting
Resolution
HDMI Color Setting
Sets the output resolution of the HDMI video signal.
setting.
Select the type of output from the HDMI OUT jack.
For this setting, please refer to the manuals of your
display device.
[Auto]
[YCbCr]
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution best suited
to the connected TV.
Select when connecting to a HDMI display
device.
[RGB]
Select when connecting to a DVI display
device.
[1080p]
Outputs 1080 lines of progressive video.
3D Mode
[1080i]
Select the type of output mode for Blu-ray 3D disc
playback.
3
Outputs 1080 lines of interlaced video.
[720p]
[Off]
Outputs 720 lines of progressive video.
Blu-ray 3D disc playback will output as 2D
mode like a normal BD-ROM disc playback.
[576p]
Outputs 576 lines of progressive video.
[On]
Blu-ray 3D disc playback will output as 3D
mode.
1080p Display Mode
When the resolution is set to 1080p, select
[24 Hz] for smooth presentation of film material
(1080p/24 Hz) with a HDMI-equipped display
compatible with 1080p/24 Hz input.
Home Menu Guide
This function allows you to display or delete the
guide bubble on the Home Menu. Set this option
to [On] for displaying guide.
Note
,
When you select [24 Hz], you may
experience some picture disturbance when
the video switches video and film material.
In this case, select [50 Hz].
y
y
Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/24 Hz, the actual frame frequency of
the video output will be 50 Hz to match the
video source format.
System Setting 23
[LANGUAGE] menu
[AUDIO] menu
Each disc has a variety of audio output options. Set
the player’s Audio options according to the type of
audio system you use.
Display Menu
Select a language for the [Settings] menu and on-
screen display.
Note
,
Since many factors affect the type of audio
output, see“Audio Output Specifications”on
page 57 for details.
Disc Menu/Disc Audio/
Disc Subtitle
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Digital Output
[Original]
[PCM Stereo] (HDMI, COAXIAL)
Refers to the original language in which the
disc was recorded.
Select if you connect this unit’s HDMI OUT or
DIGITAL AUDIO OUT jack to a device with two-
channel digital stereo decoder.
3
[Other]
Press ENTER (b) to select another language.
Use number buttons then press ENTER (b)
to enter the corresponding 4-digit number
according to the language code list on page
[PCM Multi-Ch] (HDMI only)
Select if you connect this unit’s HDMI OUT jack
to a device with multi-channel digital decoder.
[DTS Re-Encode] (HDMI, COAXIAL)
[Off] (Disc Subtitle only)
Select if you connect this unit’s HDMI OUT or
DIGITAL AUDIO OUT jack to a device with DTS
decoder.
Turn off Subtitle.
Note
,
[BitStream] (HDMI, COAXIAL)
Depending on the disc, your language setting
may not work.
Select if you connect this unit’s DIGITAL AUDIO
OUT and HDMI OUT jack to a device with
LPCM, Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS and DTS-HD decoder.
Note
,
When [Digital Output] option is set to [PCM
Multi-Ch], the audio may output as PCM
Stereo if the PCM Multi-Ch information is
not detected from HDMI device with EDID.
y
y
If the [Digital Output] option is set to [DTS
Re-Encode], the DTS Re-Encode audio is
outputted for BD-ROM discs with secondary
audio and the original audio is outputted
for the other discs (like [BitStream]).
24 System Setting
Sampling Freq.
DRC (Dynamic Range Control)
(Digital Audio Output)
This function allows you to listen to a movie at a
lower volume without losing clarity of sound.
[192 kHz]
[Off]
Select this if your A/V Receiver or Amplifier is
capable of handling 192 kHz signals.
Turns off this function.
[96 kHz]
[On]
Select this if your A/V Receiver or Amplifier is
not capable of handling 192 kHz signals. When
this choice is made, this unit
Compress the dynamic range of the Dolby
Digital, Dolby Digital Plus or Dolby TrueHD
audio output.
automatically converts any 192 kHz signals to
96 kHz so your system can decode them.
[Auto]
The dynamic range of the Dolby TrueHD audio
output is specified by itself.
[48 kHz]
Select this if your A/V Receiver or Amplifier is
not capable of handling 192 kHz and 96 kHz
signal. When this choice is made, this unit
automatically converts any 192 kHz and 96 kHz
signals to 48 kHz so your system can decode
them.
3
And the dynamic range of the Dolby Digital
and Dolby Digital Plus are operated as same as
the [On] mode.
Note
,
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete
stop mode.
Check the documentation for your A/V Receiver or
Amplifier to verify its capabilities.
System Setting 25
DVD Rating
Blocks playback of rated DVD based on their
content. (Not all discs are rated.)
[LOCK] menu
The [LOCK] settings affect only BD-ROM and DVD
playback.
To access the any features in [LOCK] settings, you
must enter the 4-digit security code you have
created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password twice,
and press ENTER (b) to create a new password.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select [Unlock], parental control is not
active and the disc plays in full.
Password
You can create or change the password.
Blu-ray Disc Rating
Set an age limit of BD-ROM play. Use number
[None]
buttons to input an age limit for BD-ROM viewing.
3
Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
[255]
[Change]
All BD-ROM can be played.
Enter the current password and press ENTER
(b). Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
[0-254]
Prohibits play of BD-ROM with corresponding
ratings recorded on them.
If you forget your password
Note
If you forget your password, you can clear it using
the following steps:
,
The [Blu-ray Disc Rating] will be applied
only for the Blu-ray disc that containing the
Advanced Rating Control.
1. Remove any disc that might be in the player.
2. Select [Password] option in the [Settings] menu.
3. Use Number buttons to enter“210499”. The
password is cleared.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
Note
,
If you make a mistake before pressing ENTER
(b), press CLEAR. Then input the correct
password.
26 System Setting
Quick Start
[OTHERS] menu
This player can stay in standby mode with low
power consumption, so that the player can
instantly boot without delay when you turn on this
unit. Set this option to [On] for activating [Quick
Start] function.
DivX® VOD
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX Certified® device
that plays DivX video. Visit divx.com for more
information and software tools to convert your files
into DivX videos.
Note
,
If [Quick Start] option is set to [On] and an
AC power is accidently re-connected to
the player by power failure etc., the player
automatically boots itself to be the standby
status. Before operating the player, wait for a
while until the player is in standby status.
y
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX
VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete
your registration.
When [Quick Start] is set to [On], power
consumption will be higher than when
[Quick Start] is set to [Off].
y
3
[Register]
Displays the registration code of your player.
Auto Power Off
[Deregister]
The screen saver appears when you leave the
player in Stop mode for about five minutes. If
you set this option to [On], the unit automatically
turns off within 20 minutes since the Screen Saver
is displayed. Set this option to [Off] to leave the
screen saver until the unit is operated by the user.
Deactivate your player and display the
deactivation code.
Note
,
All the downloaded videos from DivX(R) VOD
with this player’s registration code can only be
played on this unit.
System Setting 27
Initialize
[Factory Set]
You can reset the player to its original factory
settings.
[Blu-ray Storage Clear]
Initializes the BD-Live contents from the
connected USB storage.
Note
,
If you reset the player to its original factory
settings using [Factory Set] option, you have
to set all the activation for the on-line services
and network settings again.
3
Software
[Information]
Displays the current software version.
[Update]
You can update the software by connecting
the unit directly to the software update server
28 Operating
Using the Smart Share
You can play video, photo and audio content on
the unit by inserting a disc, connecting an USB
device or using home network (DLNA).
Home Menu Display
Using [HOME] menu
The home menu appears when you press HOME
1. Press HOME ( ) to display the home menu.
2. Select [Smart Share] and press ENTER (b).
(
). Use W/S/A/Dto select a category and
press ENTER (b).
Note
,
4
Depending on the region, the [LG Smart
World], [My Apps] service and [Search]
function may not be available.
a
b
c
Displays all linked devices.
Displays video, photo or audio content.
Displays the file or folder on linked device.
a
b
[Smart Share] - Displays Smart Share menu.
[Premium] - Displays the Premium home
[LG Smart World] - Displays LG Apps titles
provided to the unit. (page 45)
c
[My Apps] - Displays the [My Apps] screen.
d
e
f
g
[Settings] - Adjusts the system settings.
[Search] - Searches for desired LG Apps and
other content.
[Log In] - Displays login menu.
Operating 29
Playing Blu-ray 3D disc
Playing the Linked
Devices
e
This player can play the Blu-ray 3D discs which
contains separate views for the left and right eyes.
Playing a disc
Preparation
erot
In order to playback Blu-ray 3D title in
stereoscopic 3D mode, you need to:
1. Press B(OPEN/CLOSE), and place a disc on the
disc tray.
Check your TV is 3D capable and has HDMI
input(s).
y
y
y
y
2. Press B(OPEN/CLOSE) to close the disc tray.
For the most Audio CD, BD-ROM and
DVD-ROM discs, playback starts automatically.
Wear 3D glasses to enjoy the 3D experience
if it is necessary.
3. Press HOME ( ) and then select [Smart Share].
4. Select disc icon.
Check whether the BD-ROM title is the Blu-
ray 3D disc or not.
Connect an HDMI cable (Type A, High
Speed HDMI™ Cable) between the player’s
HDMI output and TV’s HDMI input.
Note
,
Playback functions described in this manual
are not always available in every files and
media. Some functions can be restricted
depending on many factors.
y
y
4
1. Press HOME ( ), and set the [3D Mode] option
on the [Settings] menu to [On] (page 22).
Depending on the BD-ROM titles, a USB
device connection may be needed for the
proper playback.
2. Press B(OPEN/CLOSE), and place a disc on the
disc tray.
3. Press B(OPEN/CLOSE) to close the disc tray.
Unfinalized DVD-VR format discs may not
be played in this player.
y
y
The playback starts automatically.
4. Refer to the owner’s manual of your 3D-ready
TV for the further instruction.
Some DVD-VR discs are made with CPRM
data by DVD RECORDER. This unit cannot
support these kinds of discs.
You may need to adjust the display settings and
focus on your TV’s setting for the improved 3D
effect.
Caution
Watching a 3D content for a long period
time may cause dizziness or tiredness.
>
y
y
It is not recommended to watch a movie
in 3D mode for infirm, child and pregnant
woman.
If you are experiencing headache, tiredness
or dizziness while viewing contents in 3D,
it is strongly recommended to stop the
playback and rest until you feel normal.
y
30 Operating
Notes on USB device
Playing a file on disc/USB
device
yui
This player can play video, audio and photo files
contained in the disc or USB device.
This player supports USB flash drive/external
HDD formatted in FAT32 and NTFS when
accessing files (music, photo, movie). However,
for BD-Live, use the USB flash drive / external
HDD formatted in FAT32.
y
This unit can support up to 4 partitions of the
USB device.
y
y
y
1. Insert a data disc on the tray or connect an USB
device.
Do not extract the USB device during operation
(play, etc.).
An USB device which requires additional
program installation when you have connected
it to a computer, is not supported.
USB device: USB device that supports USB1.1
and USB2.0.
y
y
Video, audio and photo files can be played. For
details of operations on each file, refer to relevant
pages.
When you connect the USB device on the HOME
menu, the player plays an audio file contained in
the USB storage device automatically. If the USB
storage device is containing various types of files, a
menu for the file type selection will appear.
Regular back up is recommended to prevent
data loss.
y
y
4
If you use an USB extension cable, USB HUB or
USB Multi-reader, the USB device may not be
recognized.
File loading may takes few minutes depending on
the number of content stored in the USB storage
device. Press ENTER (b) while [Cancel] is selected
to stop loading.
Some USB device may not work with this unit.
y
y
Digital camera and mobile phone are not
supported.
2. Press HOME ( ).
USB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
y
3. Select [Smart Share] and press ENTER (b).
4. Select the desired linked device in the category.
5. Select [Movie], [Photo] or [Music].
6. Select a file using W/S/A/D, and press
d(PLAY) or ENTER (b) to play the file.
Operating 31
Note
,
Playing a file on a network
server
yui
This player can play video, audio and photo files
located in a DLNA server through your home
network.
The file requirements are described on page
y
y
The thumbnail of the unplayable files can
be displayed, but those cannot be played
on this player.
The subtitle file name and video file name
have to be the same and located at the
same folder.
y
1. Check the network connection and settings
The playback and operating quality may be
affected by your home network condition.
y
y
y
2. Press HOME ( ).
3. Select [Smart Share] and press ENTER (b).
You may experience connection problems
depending on your server’s environment.
To set your PC as a DLNA server, install the
Nero MediaHome 4 on your PC. (see page
32)
4. Select a DLNA media server in the category.
5. Select [Movie], [Photo] or [Music].
4
6. Select a file using W/S/A/D, and press
d(PLAY) or ENTER (b) to play the file.
32 Operating
Windows
1. Close all Microsoft Windows programs and exit
any anti-virus software that may be running.
Using Home Network
Server for PC
DLNA stands for Digital Living Network Alliance,
which allows users to access video, photo and
audio files stored in server and enjoy them on TV
via home networking.
2. Download the Nero MediaHome 4 Essentials
software from website as below.
-
php?id=nmhlgewin
3. Unzip and double-click“SetupX.exe”to install
Nero MediaHome 4 Essentials. The Nero
MediaHome window is opened.
Before connecting to PC to play a file, Nero
MediaHome 4 Essentials program should be
installed on your PC.
4. Click [Nero MediaHome 4 Essentials]. The
installation is prepared and the installation
wizard appears.
About Nero MediaHome 4
Essentials
Nero MediaHome 4 Essentials is a software for
sharing video, audio and photo files stored on your
computer to this unit as a DLNA-compatible digital
media server.
5. Click the [Next] button to display the serial
number input screen. Click [Next] to go to the
next step.
6. If you accept all conditions, click [I accept
the License Conditions] check box and click
[Next]. Installation is not possible without this
agreement.
4
7. Click [Typical] and click [Next]. The installation
process is started.
Installing Nero MediaHome 4
Essentials
Start up your computer, and download the Nero
MediaHome 4 Essentials software from website.
8. If you want to take part in the anonymous
collection of data, select the check box and click
the [Next] button.
An installation wizard will walk you through the
quick and uncomplicated installation process. To
download and install Nero MediaHome 4 Essentials,
proceed as follows:
9. Click the [Exit] button to complete the
installation.
MAC OS X
Note
1. Start up your computer, download the Nero
MediaHome 4 Essentials software from website
as below.
,
The Nero MediaHome 4 Essentials software
is a customized software edition only for
sharing files and folders to this player.
y
y
-
php?id=nmhlgemac
The Nero MediaHome 4 Essentials software
does not support following functions:
Transcoding, Remote UI, TV control, Internet
services and Apple iTunes.
2. Unzip and double-click“Nero MediaHome.dmg”
image file. The Nero MediaHome window is
opened.
This manual explains operations with
the English version of Nero MediaHome
4 Essentials as examples. Follow the
explanation referring to the actual
operations of your language version.
y
y
3. In the Nero MediaHome window, drag the Nero
MediaHome icon either to the Applications
folder within the window or to any other
desired location.
4. You can now start the application by double-
clicking the Nero MediaHome icon in the
location you dragged it to.
Downloading times may differ depending
on the server provider or your internet
environment.
Operating 33
Sharing files and folders
System requirements
On your computer, you must share the folder
contained video, audio and/or photo content to
play them on this player.
Windows PC
Windows® XP (Service Pack 2 or higher), Windows
Vista® (no Service Pack required), Windows® 7
(no Service Pack required), Windows® XP Media
Centre Edition 2005 (Service Pack 2 or higher),
Windows Server® 2003
y
This parts explains the procedure for selecting the
shared folders on your computer.
1. Double-click the“Nero MediaHome 4 Essentials”
icon.
Windows Vista® 64-bit edition (application runs
in 32-bit mode)
y
y
y
2. Click [Network] icon on the left and define your
network name in the [Network name] field. The
Network name you enter will be recognized by
your player.
Windows® 7 64-bit edition (application runs in
32-bit mode)
Hard drive space: 200 MB hard drive space for a
typical installation of Nero MediaHome stand-
alone
3. Click [Shares] icon on the left.
4. Click [Local Folders] tab on the [Shares] screen.
5. Click [Add] icon to open the [Browse Folder]
window.
1.2 GHz Intel® Pentium® III or AMD
Sempron™ 2200+ processors
y
6. Select the folder containing the files you want
to share. The selected folder is added to the list
of shared folders.
Memory: 256 MB RAM
y
y
Graphics card with at least 32 MB video memory,
minimum resolution of 800 x 600 pixels, and 16-
bit color settings
4
7. Click [Start Server] icon to start the server.
Note
Windows® Internet Explorer® 6.0 or higher
DirectX® 9.0c revision 30 (August 2006) or higher
Network environment: 100 Mb Ethernet
y
y
y
,
If the shared folders or files are not displayed
on the player, click the folder on the [Local
Folders] tab and click [Rescan Folder] at the
[More] button.
y
y
Macintosh
Mac OS X 10.5 (Leopard) or 10.6 (Snow Leopard)
and software tools.
y
y
y
Macintosh computer with an Intel x86 processor
Hard drive space: 200 MB hard drive space for a
typical installation of Nero MediaHome stand-
alone
Memory: 256 MB RAM
y
34 Operating
Basic operations for photo
content
General Playback
To play a slide show
Press d(PLAY) to start slide show.
Basic operations for video and
audio content
To stop a slide show
Press Z(STOP) while slide show.
To stop playback
Press Z(STOP) during playback.
To pause a slide show
Press M(PAUSE) while slide show.
Press d(PLAY) to re-start the slide show.
To pause playback
Press M(PAUSE) during playback.
Press d(PLAY) to resume playback.
To skip to the next/previous photo
While viewing a photo in full screen, press Aor D
to go to the previous or next photo.
To play frame-by-frame (Video)
Press M(PAUSE) during video playback.
Press M(PAUSE) repeatedly to play Frame-by-Frame
playback.
Using the disc menu
ero
4
To scan forward or backward
Press cor vto play fast forward or fast reverse
during playback.
To display the disc menu
You can change the various playback speeds by
pressing cor vrepeatedly.
The menu screen may be displayed first after
loading a disc which contains a menu. If you want
to display the disc menu during playback, press
DISC MENU.
To slow down the playing speed
While the playback is paused, press vrepeatedly
to play various speeds of slow motion.
Use W/S/A/Dbuttons to navigate through
menu items.
To skip to the next/previous
chapter/track/file
During playback, press Cor Vto go to the
next chapter/track/file or to return to the beginning
of the current chapter/track/file.
To display the Pop-up menu
Some BD-ROM discs contain Pop-up menu that
appears during playback.
Press TITLE/POPUP during playback, and use W/
S/A/Dbuttons to navigate through menu
items.
Press Ctwice briefly to step back to the previous
chapter/track/file.
In the file list menu of a server, there may have
many types of content in a folder together. In this
case, press Cor Vto go to the previous or
next content with same type.
Operating 35
Resume playback
Last Scene Memory
eroyt
u
er
This unit memorizes the last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
The unit records the point where you pressed the
Z(STOP) depending on the disc.
If“MZ(Resume Stop)”appears on the screen briefly,
press d(PLAY) to resume playback (from the scene
point).
If you press Z(STOP) twice or unload the disc,
“Z(Complete Stop)”appears on the screen. The unit
will clear the stopped point.
Note
,
Last Scene Memory function for a previous
disc is erased once a different disc is played.
y
y
y
y
This function may not work depending on
the disc.
Note
,
The resume point may be cleared when a
button is pressed (for example; 1(POWER),
B(OPEN/CLOSE), etc).
On BD-ROM discs with BD-J, the last scene
memory function does not work.
y
This unit does not memorize settings of
a disc if you switch off the unit before
commencing to play it.
On BD-ROM discs with BD-J, the resume
playback function does not work.
y
y
If you press Z(STOP) once during BD-ROM
interactive title playback, the unit will be in
Complete Stop mode.
4
36 Operating
Displaying content information on-
screen
On-Screen Display
You can display and adjust various information and
settings about the content.
eroy
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
To control video playback
ENTER (b).
eroy
You can control playback and set options while
watching videos.
During playback, press INFO/MENU (m).
4
a Title – Current title number/total number of
a Progress bar - Displays the current position
titles.
and total playing time.
b Chapter – Current chapter number/total
b [Disc Menu] - Accesses menu on a disc.
number of chapters.
c [Title/Popup] - Displays the DVD title menu
c Time – Elapsed playing time/total playback
or BD-ROM’s pop-up menu, if available.
time.
d [Option] - Displays playback information.
d Audio – Selected audio language or channel.
e [Repeat] - Repeats a desired section or
e Subtitle – Selected subtitle.
sequence. (page 38)
f Angle – Selected angle/total number of
angles.
g TV Aspect Ratio – Selected TV aspect ratio.
h Picture Mode – Selected picture mode.
Operating 37
Note
,
Setting the slide show option
You can use various options during viewing a
photo in full screen.
If no button is pressed for a few seconds,
the on-screen display disappears.
y
y
y
y
A title number cannot be selected on some
discs.
1. While viewing pictures, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
Available items may differ depending on
discs or titles.
ENTER (b)
If an interactive Blu-ray Disc is playing back,
some setting information is displayed on
the screen but prohibited to be changed.
To control photo view
Controls playback and sets options while viewing
pictures in full screen.
You can control playback and set options while
viewing pictures in full screen.
a [Speed] - Use A/Dto select a delaying
While viewing pictures, press INFO/MENU (m).
speed between photos in a slide show.
4
b [Effect] - Use A/Dto select a transition
effect between photos in a slide show.
c [Music Select] – Select the background music
for the slide show (page 42).
a [Slide show] - Starts or pause slide show.
b [Music] - Select the background music for the
slide show (page 42).
c [Option] - Displays slide show options.
d [Rotate] - Rotates the photo clockwise.
e [Zoom] - Displays the [Zoom] menu.
38 Operating
Repeating a specific portion
eroty
This player can repeat a portion you have selected.
Advanced Playback
Repeat playback
1. During playback, press REPEAT (h) to select
[A-B] and press ENTER (b) at the beginning of
the portion you wish to repeat.
erotu
y
2. Press ENTER (b) at the end of the portion. Your
Blu-ray Disc / DVD / Video files
selected portion will be repeated continually.
During playback, press REPEAT (h) to select a
3. To return to normal playback, press CLEAR.
desired repeat mode.
Note
,
A-B – Selected portion will be repeated continually.
You cannot select a portion less than 3
seconds.
y
y
Chapter – The current chapter will be played back
repeatedly.
This function may not work on some disc or
title.
Title – The current title will be played back
repeatedly.
All – All the titles or files will be played back
repeatedly.
Playing from selected time
eroy
1. During playback, press INFO/MENU (m).
Off – Returns to normal playback.
To return to normal playback, press CLEAR.
Audio CDs/Audio files
4
2. Select an [Option] using A/D, and press
During playback, press REPEAT (h) repeatedly to
select a desired repeat mode.
ENTER (b)
3. Select the [Time] option and then input the
required start time in hours, minutes, and
seconds from left to right.
– Selected portion will be repeated continually.
(Audio CD only)
Track– The current track or file will be played
back repeatedly.
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter“21020”.
All – All the tracks or files will be played back
repeatedly.
Press A/Dto skip the playback 60 seconds
forward or backward.
All – All the tracks or files will be played
back repeatedly in random order.
4. Press ENTER (b) to start playback from selected
time.
– The tracks or files will be played back in
random order.
Note
,
This function may not work on some disc or
titles.
y
y
To return to normal playback, press CLEAR.
This function may not work depending on
the file type and ability of the DLNA server.
Note
,
This function may not work on some disc or
title.
Operating 39
Selecting a subtitle language
eroy
1. During playback, press INFO/MENU (m).
Watching from a different
angle
er
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback.
2. Select an [Option] using A/D, and press
ENTER (b)
3. Use W/Sto select the [Subtitle] option.
1. During playback, press INFO/MENU (m).
4. Use A/Dto select desired subtitle language.
2. Select an [Option] using A/D, and press
By pressing ENTER (b), you can set various
subtitle options.
ENTER (b)
3. Use W/Sto select the [Angle] option.
4. Use A/Dto select desired angle.
5. Press BACK (1) to exit the On-Screen display.
Note
,
5. Press BACK (1) to exit the On-Screen display.
Some discs allow you to change subtitle
selections only via the disc menu. If this is the
case, press TITLE/POPUP or DISC MENU button
and choose the appropriate subtitle from the
selections on the disc menu.
Changing the TV Aspect Ratio
eoy
You can change the TV aspect ratio setting during
playback.
4
Hearing a different audio
eroy
1. During playback, press INFO/MENU (m).
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
ENTER (b)
3. Use W/Sto select the [TV Aspect Ratio]
2. Select an [Option] using A/D, and press
option.
ENTER (b)
4. Use A/Dto select desired option.
3. Use W/Sto select the [Audio] option.
5. Press BACK (1) to exit the On-Screen display.
4. Use A/Dto select desired audio language,
Note
audio track or audio channel.
,
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV
Aspect Ratio] option in the [Settings] menu is
not changed.
Note
,
Some discs allow you to change audio
selections only via the disc menu. In this
case, press TITLE/POPUP or DISC MENU
button and choose the appropriate audio
from the selections on the disc menu.
y
Immediately after you have switched sound,
there may be a temporary discrepancy
between the display and actual sound.
y
y
On BD-ROM disc, the multi audio format
(5.1CH or 7.1CH) is displayed with [MultiCH]
in the on-screen display.
40 Operating
Setting the [User setting] option
1. During playback, press INFO/MENU (m).
Changing subtitle Code Page
y
If the subtitle is displayed in broken letter, you can
change the subtitle code page to view the subtitle
file properly.
2. Select an [Option] using A/D, and press
ENTER (b)
3. Use W/Sto select the [Picture Mode] option.
4. Use A/Dto select the [User setting] option,
1. During playback, press INFO/MENU (m).
and press ENTER (b).
2. Select an [Option] using A/D, and press
ENTER (b)
3. Use W/Sto select the [Code Page] option.
4. Use A/Dto select desired code option.
5. Use W/S/A/Dto adjust the [Picture Mode]
options.
Select [Default] option then press ENTER (b) to
reset the all video adjustments.
4
6. Use W/S/A/Dto select the [Close] option,
and press ENTER (b) to finish setting.
5. Press BACK (1) to exit the On-Screen display.
Viewing content information
Changing the Picture Mode
eroy
You can change the [Picture mode] option during
playback.
y
The player can display the content information.
1. Select a file using W/S/A/D.
2. Press INFO/MENU (m) to display the option
1. During playback, press INFO/MENU (m).
menu.
2. Select an [Option] using A/D, and press
The file information appears on the screen.
ENTER (b)
During video playback, you can display the file
information by pressing TITLE/POPUP.
3. Use W/Sto select the [Picture Mode] option.
4. Use A/Dto select desired option.
Note
,
5. Press BACK (1) to exit the On-Screen display.
The information displayed on the screen
may not correct comparing actual content
information.
Operating 41
Changing content list view
Selecting a subtitle file
yui
y
On the [Smart Share] menu, you can change the
content list view.
If the subtitle file name is different from the video
file name, you need to select the subtitle file on the
[Movie] menu before playing the movie.
Press red (R) colored button repeatedly.
1. Use W/S/A/Dto select the subtitle file you
wish to play in the [Movie] menu.
2. Press ENTER (b).
Press ENTER (b) again to deselect the subtitle
file. Selected subtitle file will be displayed when
you play the video file.
4
Note
,
If you press Z(STOP) during playback, the
y
y
subtitle selection is cancelled.
This function is not available for playing file
on a server via home network.
42 Operating
Listening to music during slide Setting the [3D] option
show
i
y
This function allows you to play 3D content if the
file is encoded in 3D.
You can display photo files while listening to audio
files.
1. During playback, press INFO/MENU (m).
2. Select [3D] using A/D, and press ENTER (b)
3. Use W/S/A/Dto select desired options.
1. While viewing a photo in full screen, press INFO/
MENU (m) to display the option menu.
2. Select an [Option] using A/D, and press
You can adjust 3D’s depth and distance on the
[3D Setting] option.
ENTER (b).
3. Use W/Sto select [Music Select] option, and
press ENTER (b) to display the [Music Select]
menu.
On [3D Setting], select [Init] option then press
ENTER (b) to reset the all adjustments.
4. Use W/Sto select a device, and press ENTER
(b).
Available device may differ depending on the
location of the current photo file.
Photo location
Disc, USB
Available Device
Disc, USB
4
DLNA server
DLNA server
5. Use W/Sto select a file or a folder you wish to
play.
Select gand press ENTER (b) to display the
upper directory.
Note
,
When selecting audio file from a server, folder
selection is not available. Only file selection is
available.
6. Use Dto select [OK], and press ENTER (b) to
complete music selection.
Operating 43
Caution
>
Advanced Features
Do not extract the connected USB device
while content is being downloaded or a Blu-
ray disc is still in the disc tray. Doing so may
damage the connected USB device and BD-
Live features may not operate properly with
the damaged USB device anymore. If the
connected USB device seems damaged from
such an action, you can format the connected
USB device from the PC and reuse it with this
player.
Enjoying BD-Live™
e
BD-ROM supporting BD-Live that has a network
extension function allows you to enjoy more
functions such as downloading new movie trailers
by connecting this unit to the internet.
1. Check the network connection and settings
Note
,
Some BD-Live content may be restrictively
accessed in some territories by content
provider’s own decision.
y
2. Insert an USB storage device to the USB port on
the front panel.
An USB storage device is needed to download
bonus content.
It may take up to several minutes to load
and start enjoying BD-Live content.
y
y
3. Press HOME ( ), and set the [BD-LIVE
connection] option on the [Settings] menu
For BD-Live, use the USB flash drive /
external HDD formatted in FAT32 only.
4
Depending on a disc, the BD-Live function may
not be operated if [BD-LIVE connection] option
is set to [Partially Permitted].
4. Insert a BD-ROM with BD-Live.
The operations may differ depending on the
disc. Refer to the manual supplied with the disc.
44 Operating
Caution
The recording or copying features on this
player are provided for your personal and
non-commercial use. The making of
>
Audio CD recording
You can record one desired track or all of the tracks
in Audio CD to an USB storage device.
1. Insert an USB storage device to the USB port on
the front panel.
unauthorized copies of copy-protected
material, including computer programs, files,
broadcasts and sound recordings, may be an
infringement of copyrights and constitute a
criminal offense. This equipment should not be
used for such purposes. LG expressly disclaims
any responsibility for illegal distribution or
use of unauthorized content in commercial
purpose.
2. Insert an Audio CD into the player.
The playback starts automatically.
3. Press red (R) colored button to start [CD
Recording].
During
Stop mode
playback
Be Responsible
Recording
track
Respect Copyrights
All of the tracks
4X speed
playing track
Recording
time
normal
speed.
Note
,
4
For audio CD recording, use the USB flash
drive / external HDD formatted in FAT32
only.
y
Audio track is recorded to an audio file with
192 kbps.
y
y
y
Recording times in the table above are
approximate.
Actual recording time for USB storage
device varies depending on the USB storage
device’s ability.
Make sure that there is minimum of 50 MB
free space is needed when recording into
the USB storage device.
y
The length of the audio should be longer
than 20 seconds for the proper recording.
y
y
Do not turn off this player or extract the
connected USB storage device during Audio
CD recording.
Operating 45
Using the Premium
You can use various content services via Internet
with the Premium feature.
Using the LG Smart
World
You can use the LG application services on
this player via Internet. You can easily find and
download various applications from LG Smart
World.
1. Check the network connection and settings
2. Press HOME ( ).
3. Select the [Premium] using A/D, and press
1. Check the network connection and settings
ENTER (b).
2. Press HOME ( ).
3. Select the [LG Smart World], and press ENTER
(b).
4. Select an online service using W/S/A/D,
and press ENTER (b).
Note
,
4. Select a category using A/D, and press ENTER
For detailed information of each service,
contact to the content provider or visit
support link of the service.
y
y
4
(b).
5. Use W/S/A/Dto select an application, and
press ENTER (b) to display the information.
The content of Premium services and
service related information, including user
interface, is subject to changes. Please refer
to the web site of each service for most up-
to-date information.
6. Press ENTER (b) while [Install] icon is
highlighted. The application will be installed to
the player.
To install an application to the player, user
information of signning in.
For the first time to access [Premium] or
[LG Smart World] feature, current country
setting appears. If you want to change
the country setting, select [Edit] and press
ENTER (b).
y
7. Press yellow (Y) colored button to display the
[My Apps] screen.
8. Select the installed application and press ENTER
(b) to excute it.
Note
,
Depending on the region, the [LG Smart
World], [My Apps] service and [Search]
function may not be available.
y
y
To install a paid application, you need to be
more information.
46 Operating
Signing in
Searching online content
To use the [LG Smart World] feature, you need to
sign in with your account.
If you are having difficulties finding specific content
from online services, you can use the all-in-one
search function by entering keywords in the
[Search] menu.
1. On the [LG Smart World] or [My Apps] screen,
press red (R) colored button.
1. Press HOME ( ).
2. Fill the [ID] and [Password] field using the virtual
keyboard.
2. Select the [Search] icon on the home menu
using W/S/A/D, and press ENTER (b).
If you do not have an account, press red (R)
colored button to register.
The [Search] menu appears on the screen with
virtual keyboard.
3. Use W/S/A/Dto select [OK], and press
ENTER (b) to sign in with your account.
3. Use
W/S/A/D
to select letters then press
ENTER (b) to confirm your selection on the
virtual keyboard.
If you select the [Auto Sign In] check box,
your ID and password are remembered and
automatically signed in without entering them.
4. When you finish entering the keyword, select
[OK] and press ENTER (b) to display search
result.
Note
,
If you want to sign in with other account,
press red (R) colored button on [LG Smart
World] or [My Apps] screen, and select
[Change User] option.
y
y
5. Use W/S/A/Dto select a desired content,
and press ENTER (b) to move to the selected
content directly.
4
Note
To view the information of your account and
applications, press red (R) colored button on
[LG Apps] or [My Apps] screen, and select
[Account Setting] option.
,
Depending on the region, the [LG Smart
World], [My Apps] service and [Search]
function may not be available.
y
y
The [Search] function does not search
content in every online services. It works
only in certain online services.
Operating 47
Using the My Apps
Menu
You can move or delete an installed application in
the [My Apps] menu.
1. Press HOME ( ).
2. Select the [My Apps], and press ENTER (b).
Move an application
1. Select an application, and press green (G)
colored button to display the options.
2. Use W/Sto select [Move], and press ENTER
4
(b).
3. Use W/S/A/Dto select a position you want
to move to, and press ENTER (b).
Delete an application
1. Select an application, and press green (G)
colored button to display the options.
2. Use W/Sto select [Delete], and press
ENTER(b).
3. Use A/Dto select [Yes], and press ENTER (b)
to confirm.
Note
,
Depending on the region, the [LG Smart
World], [My Apps] service and [Search]
function may not be available.
48 Troubleshooting
Troubleshooting
General
Symptom
Cause & Solution
The Power does not turned on.
Plug the power cord into the wall outlet securely.
y
The unit does not start
playback.
Insert a playable disc. (Check the disc type, color system, and regional
code.)
y
Place the disc with the playback side down.
Place the disc on the disc tray correctly inside the guide.
Clean the disc.
y
y
y
y
Cancel the Rating function or change the rating level.
The connected USB storage
device is not recognized.
Try using different USB cable, some USB cables may not support
enough current for normal USB operation.
y
y
y
y
If you use an USB extension cable or USB HUB, the USB devices may
not be recognized.
An USB device which requires additional program installation when
you have connected it to a computer is not supported.
This unit supports only USB Flash Drive and USB External HDD with
FAT32 or NTFS format.
5
The angle cannot be changed.
Multi-angles are not recorded on the DVD Video being played.
y
Cannot play movie, photo or
music files.
The files are not recorded in a format that the unit can play.
The unit does not support the codec of the movie file.
y
y
The remote control does not
work properly.
The remote control is not pointed at the remote sensor of the unit.
The remote control is too far from the unit.
y
y
y
y
There is an obstacle in the path of the remote control and the unit.
The batteries in the remote control are exhausted.
The unit is plugged in, but the You can reset the unit as follows.
power will not turn on or off.
Unplug the power cord, wait at least five seconds, and then plug it in
y
again.
The unit is not operating
normally.
Troubleshooting 49
Network
Symptom
Cause & Solution
BD-Live feature does not work.
The connected USB storage may not have enough space. Connect
the USB storage with at least 1GB free space.
y
y
y
Ensure that the unit is correctly connected to the local area network
and can access the internet (see page 16).
Your broadband speed may not fast enough to use the BD-Live
features. Contact your Internet Service Provider (ISP) and increase the
broadband speed is recommended.
The [BD-LIVE connection] option in the [Settings] menu is set to
[Prohibited]. Set the option to [Permitted].
y
y
Streaming video services (such
as YouTube™, etc.) are often
stopped or“buffer”during
playback.
Your broadband service speed may not be fast enough to stream
video services. Contact your Internet Service Provider (ISP) and
increase the broadband speed is recommended.
Media servers are not displayed
on the device list.
The firewall or anti-virus software on your media server is running.
Turn off the firewall or anti-virus software running on your media
server.
y
y
The player is not connected to the local area network that your media
server is connected.
5
50 Troubleshooting
Picture
Symptom
Cause & Solution
There is no picture.
Select the appropriate video input mode on the TV so the picture
from the unit appears on the TV screen.
y
Connect the video connection securely.
y
y
Check the [HDMI Color Setting] in the [Settings] menu is set to the
appropriate item that conforms to your video connection.
Your TV may not support the resolution you have set on the player.
Change the resolution that your TV accepts.
y
y
The player’s HDMI OUT jack is connected to a DVI device that does
not support copyright protection.
Picture noise appears.
You are playing a disc recorded in a color system that is different from
your TV.
y
Set the resolution which your TV accepts.
y
y
Blu-ray 3D disc playback does
not output 3D views.
Connect the player to your TV with HDMI cable (Type A, High Speed
HDMI™ Cable).
Your TV may not support“HDMI 3D mandatory format”.
y
y
The [3D Mode] option in the [Settings] menu is set to [Off].
Set the option to [On].
5
Customer support
You can update the Player using the latest software to enhance the products operation and/or add new
features. To obtain the latest software for this player (if updates have been made), please visit
Open source software notice
To obtain the corresponding source code under GPL, LGPL and other open source licenses, please visit
available to download with the source code.
Appendix 51
Setting up the remote to
Controlling a TV with
the Supplied Remote
Control
control your TV
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
You can control your TV using the buttons below.
1. While holding down 1(TV POWER) button,
and press the manufacturer code for your
TV with the numerical buttons (see the table
below).
Manufacturer
LG
Code Number
1(Default), 2
Zenith
1, 3, 4
1, 2
6, 7
8, 9
4
GoldStar
Samsung
Sony
By pressing
You can
1(TV POWER)
Turn the TV on or off.
Switch the TV’s input source
between the TV and other
input sources.
INPUT
Hitachi
2. Release the 1(TV POWER) button to complete
VOL +/–
Adjust the volume of the TV
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.
Note
,
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
6
52 Appendix
Software update
Network Software
Update
You can update the player using the latest software
to enhance the products operation and/or add
new features. You can update the software by
connecting the unit directly to the software update
server.
Network update notification
Note
From time to time, performance improvements
and/or additional features or services may be
made available to units that are connected to a
broadband home network. If there is new software
available and the unit is connected to a broadband
home network, the player will inform you about the
update as follows.
,
Before updating the software in your player,
remove any disc and USB Device from the
player.
y
Before updating the software in your player,
turn the player off and then turn it back on.
y
y
During the software update procedure,
do not turn off the player or disconnect
AC power, or do not press any button.
Option 1:
1. The update menu will appear on the screen
when you turn off the player.
If you cancel the update, turn off the power
and turn it on for stable performance.
y
y
2. Use A/Dto select a desired option and then
This unit cannot be updated to previous
software version.
press ENTER (b).
1. Check the network connection and settings
2. Select [Software] option in the [Settings] menu
then press ENTER (b).
3. Select [Update] option, and press ENTER (b).
[OK]
Starts the software update.
6
Exits the update menu and turns
the power off.
[Cancel]
Option 2:
The player will check for the newest update.
If the software update is available from the update
server, the“Update”icon appears in the Home
menu. Press blue (B) colored button to start the
update procedure.
Note
,
Pressing ENTER (b) while checking for the
y
y
update will end the process.
If there is no update available, the Message,
“No update is found.”appears. Press ENTER
(b) to return to the [Home Menu].
Appendix 53
4. If newer version exists, the message“Do you
want to download it?”appears.
5. Select [OK] to start update. (Selecting [Cancel]
will end the update.)
6. The player starts downloading the newest
update from the server. (Downloading will
takes several minutes depending on your home
network condition)
7. When downloading is completed, the message,
“Download is complete. Do you want to
update?”appears.
8. Select [OK] to start updating. (Selecting [Cancel]
will end the update and downloaded file will
not be re-usable. To update software the next
time, the software update procedure has to be
started from the beginning again.)
Caution
>
Do not turn off the power during the software
update.
Note
,
If the software includes the driver update, disc
tray may open during the process.
9. When update is completed, the power will be
turned off automatically in a few seconds.
10. Turn the power back on. The system now
operates with the new version.
Note
6
,
The Software Update function may not
work properly depending on your internet
environment. In this case, you can obtain
the latest software from the authorized LG
Electronics Service Center then update your
player. Refer to“Customer Support”on page
54 Appendix
Additional Information
File requirement
Video files
File
Location
File
Extension
Audio
Format
Codec Format
Subtitle
“.avi”, “.divx”, “.mpg”,
“.mpeg”, “.mkv”,
DIVX3.11, DIVX4, DIVX5,
DIVX6 (standard playback Digital,
Dolby
SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt),
“.mp4”, “.asf”, “.wmv”,
“.m4v”(DRM free),
“.vob”, “.3gp”, “.mov”,
“.trp”, “.m2t”, “.mpe”,
“.m1v”, “.m2v”, “.wm”,
”.flv”, “.ts”, “.dat”
only),
DTS, MP3, MicroDVD (.sub/.txt), VobSub
WMA, (.sub), SubViewer 1.0 (.sub),
AAC, AC3 SubViewer 2.0 (.sub/.txt),
TMPlayer (.txt), DVD Subtitle
System (.txt)
Disc,
USB
XVID, MPEG1 SS, H.264/
MPEG-4 AVC, MPEG2
PS, MPEG2 TS, VC-1 SM
(WMV3)
“.avi”, “.divx”, “.mpg”,
“.mpeg”, “.mkv”,
DIVX3.11, DIVX4, DIVX5,
DIVX6 (standard playback Digital,
Dolby
SubRip (.srt / .txt), SAMI
(.smi), SubStation Alpha
“.mp4”, “.asf”, “.wmv”,
“.m4v”(DRM free),
“.mov”, “.trp”, “.m2t”,
“.mpe”, “.m1v”, “.m2v”, PS, MPEG2 TS, VC-1 SM
”.flv”, “.ts”
only),
DTS, MP3, (.ssa/.txt), MicroDVD (.sub/.
WMA, txt), SubViewer 1.0 (.sub),
AAC, AC3 SubViewer 2.0 (.sub/.txt),
TMPlayer (.txt), DVD Subtitle
System (.txt)
DLNA
XVID, MPEG1 SS, H.264/
MPEG-4 AVC, MPEG2
(WMV3)
Audio files
File
Location
File
Extension
Sampling Frequency
Bitrate
Note
6
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free),
“.flac”
within 32 - 48 kHz
(WMA), within 16 - 48
kHz (MP3)
within 32 - 192 kbps
(WMA), within 32 - 320 not supported on
kbps (MP3)
Some wav files are
Disc,
USB
this player.
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free)
within 32 - 48 kHz
(WMA), within 16 - 48
kHz (MP3)
within 32 - 192 kbps
(WMA), within 32 - 320 not supported on
kbps (MP3)
Some wav files are
DLNA
this player.
Photo files
File
Location
File
Extension
Recommended
Size
Note
Disc,
USB,
DLNA
“.jpg”, “.jpeg”,
“.png”, “.gif”
Less than 4,000 x 3,000 x 24 bit/pixel Progressive and lossless
Less than 3,000 x 3,000 x 32 bit/pixel compression photo image files
are not supported.
DLNA server for Macintosh edition has limitations in file compatibility, such as ASF, WMA and WMV.
y
Appendix 55
Note
Note
,
,
The file name is limited to 180 characters.
y
y
A“avi”file which is encoded“WMV 9 codec”
is not supported.
y
y
Maximum files/Folder: Less than 2000 (total
number of files and folders)
This player supports UTF-8 files even it
contains Unicode subtitle content. This
player can not support the pure Unicode
subtitle files.
Depending on the size and number of the
files, it may take several minutes to read the
content on the media.
y
Depending on the types of file or ways of
recording, it may not play back.
y
y
File compatibility may differ depending on
the server.
y
y
A disc which was recorded by multi-session
on normal PC is not supported on this
player.
Because the compatibility on DLNA
server are tested on the DLNA server
(Nero MediaHome 4 Essentials Windows
edition) environment, file requirements and
playback functions may differ depending on
media servers.
To be playback a video file, video file name
and Subtitle file name must be the same.
y
y
When you play a video file with a extension
such as“.ts”, “.m2ts”, “.mts”, “.tp”, “.Trp”or“.m2t”,
your player may not support subtitle files.
not always compatible. There may have
some restrictions by file features and media
server’s ability.
y
y
y
The total playback time of audio file
indicated on the screen may not correct for
VBR files.
y
y
Playing video subtitle files are only
available on DLNA media server created
by Nero MediaHome 4 Essentials software
downloaded from website.
Video / Audio codec compatibility may
differ depending on video file.
The files from removable media such as USB
drive, DVD-drive etc. on your media server
may not be shared properly.
AVCHD (Advanced Video
Codec High Definition)
This player can playback AVCHD format discs.
These discs are normally recorded and used in
camcorders.
This unit cannot support the ID3 Tag
embedded MP3 file.
y
y
y
The total playback time of audio file
indicated on the screen may not correct for
VBR files.
6
The AVCHD format is a high definition digital
video camera format.
y
y
HD video files contained on the CD/DVD or
USB 1.0/1.1 may not played properly.
Blu-ray Disc or USB 2.0 are recommended to
play back HD video files.
y
The MPEG-4 AVC/H.264 format is capable of
compressing images at higher efficiency than
that of the conventional image compressing
format.
This player supports H.264/MPEG-4 AVC
profile Main, High at Level 4.1. A file with
higher level may not be supported.
y
y
This player can playback AVCHD discs using
“x.v.Color”format.
y
y
This player does not support files that are
Some AVCHD format discs may not play
depending on the recording condition.
2
recorded with GMC 1 or Qpel
.
*
*
AVCHD format discs need to be finalized.
y
y
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
“x.v.Color”offers a wider color range than normal
DVD camcorder discs.
56 Appendix
About DLNA
Compatibility notes
This Player is a DLNA Certified digital media player
that can display and play video, photo and audio
content from your DLNA-compatible digital media
server (PC and Consumer Electronics).
Because BD-ROM is a new format, certain disc,
digital connection and other compatibility issues
are possible. If you experience compatibility
problems, please contact an authorized
Customer Service Center.
y
The Digital Living Network Alliance (DLNA) is a
cross-industry organization of consumer electronics,
computing industry and mobile device companies.
Digital Living provides consumers with easy sharing
of digital media through your home network.
This unit allows you to enjoy functions such
as picture-in-picture, secondary audio and
Virtual packages, etc., with BD-ROM supporting
BONUSVIEW (BD-ROM version 2 Profile 1 version
1.1). Secondary video and audio can be played
from a disc compatible with the picture-in-
picture function. For the playback method, refer
to the instructions in the disc.
y
The DLNA certification logo makes it easy
to find products that comply with the DLNA
Interoperability Guidelines. This unit complies with
DLNA Interoperability Guidelines v1.5.
Viewing high-definition content and up-
converting standard DVD content may require a
HDMI-capable input or HDCP-capable DVI input
on your display device.
y
When a PC running DLNA server software or
other DLNA compatible device is connected to
this player, some setting changes of software or
other devices may be required. Please refer to the
operating instructions for the software or device for
more information.
Some BD-ROM and DVD discs may restrict the
use of some operation commands or features.
y
y
Dolby TrueHD, Dolby Digital Plus and DTS-HD are
supported with maximum 7.1 channels if you
use HDMI connection for the audio output of the
unit.
Certain system requirements
For high definition video playback:
High definition display that has HDMI input jack.
BD-ROM disc with high definition content.
y
y
y
You can use an USB device to store some disc
related information, including downloaded
online content. The disc you are using will
control how long this information is retained.
y
HDMI or HDCP capable DVI input on your display
device is required for some content (as specified
by disc authors).
For Dolby® Digital Plus, Dolby TrueHD and DTS-HD
multi-channel audio playback:
6
An amplifier/receiver with a built-in (Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS or
DTS-HD) decoder.
y
Main, center, surround speakers and subwoofer
as necessary for chosen format.
y
Appendix 57
Audio Output Specifications
3
Jack/Setting
COAXIAL (DIGITAL AUDIO OUT)
*
Source
4
BitStream
PCM Stereo
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
DTS Re-encode
*
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
AAC
DTS
DTS
Dolby Digital
Dolby Digital
Dolby Digital
AAC
DTS 2ch
DTS
DTS
DTS
DTS
DTS-HD
DTS
DTS
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
DTS
PCM 2ch
PCM 2ch
PCM 2ch
DTS
DTS
Jack/Setting
Source
HDMI OUT
4
1
2
BitStream
* *
PCM Stereo
PCM Multi-Ch
PCM 2ch
DTS Re-encode
*
Dolby Digital
Dolby Digital Plus
Dolby TrueHD
AAC
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
DTS
DTS
Dolby Digital
PCM 2ch
Dolby Digital Plus
Dolby TrueHD
AAC
PCM 2ch
DTS 2ch
DTS
PCM 2ch
DTS
PCM 2ch
DTS
DTS
DTS-HD
PCM 2ch
DTS
DTS-HD
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
PCM 2ch
DTS
Linear PCM 2ch
Linear PCM 5.1ch
Linear PCM 7.1ch
PCM 5.1ch
PCM 7.1ch
DTS
DTS
6
*1 The secondary and interactive audio may not
be included in the output bitstream if [Digital
Output] option is set to [BitStream]. (Except
LPCM Codec : the output always include
interactive and secondary audio.)
*4 If the [Digital Output] option is set to [DTS re-
encode], the audio output is limited to 48 kHz
and 5.1Ch. If the [Digital Output] option is set
to [DTS re-encode], the DTS Re-encode audio
is outputted for BD-ROM discs, and the original
audio is outputted for the other discs (like
[BitStream]).
*2 This player automatically selects the HDMI audio
according to the decoding capability of the
connected HDMI device even though [Digital
Output] option is set to [BitStream].
If the HDMI OUT jack is connected to your TV
with High Speed HDMI™ Cable and Dolby Digital
Plus/Dolby TrueHD is outputted from HDMI OUT
jack, DIGITAL AUDIO OUT jack is limited to“PCM
2ch”(When the HDMI and DIGITAL AUDIO OUT
are connected simultaneously).
y
*3 On the PCM audio output, the sampling
frequency of DIGITAL AUDIO OUT is limited to
96 kHz.
58 Appendix
The audio is outputted as PCM 48 kHz/16 bit for
MP3/WMA file and PCM 44.1kHz/16 bit for Audio
CD during playback.
y
y
You must select a digital audio output and
a maximum sampling frequency that your
Amplifier (or AV receiver) accepts using [Digital
Output] and [Sampling Freq.] options on the
With digital audio connection (DIGITAL AUDIO
OUT or HDMI OUT), Disc Menu button sounds of
BD-ROM may not be heard if the [Digital Output]
option is set to [BitStream].
y
y
y
If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound
or no sound at all.
Multi-channel Digital Surround Sound via digital
connection can only be obtained if your receiver
is equipped with a Digital Multi-channel decoder.
6
Appendix 59
Area Code List
Choose an area code from this list.
Area
Code Area
AF Fiji
Code Area
FJ Monaco
Code Area
Code
MC
MN
MA
NP
NL
AN
NZ
NG
NO
OM
PK
Singapore
Slovak Republic
SG
Afghanistan
Argentina
Australia
Austria
FI Mongolia
FR Morocco
DE Nepal
SK
SI
AR Finland
AU France
AT Germany
BE Great Britain
BT Greece
BO Greenland
BR Hong Kong
KH Hungary
CA India
Slovenia
South Africa
South Korea
Spain
ZA
KR
Belgium
Bhutan
GB Netherlands
GR Antilles
GL New Zealand
HK Nigeria
HU Norway
IN Oman
ES
Sri Lanka
Sweden
LK
Bolivia
SE
Brazil
Switzerland
Taiwan
CH
TW
TH
TR
Cambodia
Canada
Chile
ID Pakistan
IL Panama
Thailand
Turkey
CL Indonesia
CN Israel
China
PA
IT Paraguay
JM Philippines
JP Poland
PY
Uganda
UG
UA
US
UY
UZ
VN
ZW
Colombia
Congo
CO Italy
PH
PL
Ukraine
CG Jamaica
CR Japan
United States
Uruguay
Uzbekistan
Vietnam
Costa Rica
Croatia
HR Kenya
KE Portugal
KW Romania
LY Russian
PT
Czech Republic
Denmark
Ecuador
Egypt
CZ Kuwait
DK Libya
RO
Federation
RU
SA
SN
LU
Zimbabwe
EC Luxembourg
EG Malaysia
SV Maldives
ET Mexico
Saudi Arabia
MY
6
Senegal
El Salvador
Ethiopia
MV
MX
60 Appendix
Language Code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
Language
Afar
Code Language
6565 French
6570 Frisian
Code Language
7082 Lithuanian
7089 Macedonian
7176 Malagasy
7565 Malay
Code Language
7684 Sindhi
7775 Singhalese
7771 Slovak
7783 Slovenian
7776 Spanish
7773 Sudanese
7782 Swahili
7779 Swedish
7778 Tagalog
7865 Tajik
Code
8368
8373
8375
8376
6983
8385
8387
8386
8476
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Afrikaans
Albanian
Amharic
Arabic
8381 Galician
6577 Georgian
6582 German
7289 Greek
6869 Malayalam
6976 Maori
Armenian
Assamese
Aymara
6583 Greenlandic
6588 Guarani
6590 Gujarati
6665 Hausa
7576 Marathi
7178 Moldavian
7185 Mongolian
7265 Nauru
Azerbaijani
Bashkir
Basque
6985 Hebrew
6678 Hindi
7387 Nepali
7869 Tamil
Bengali; Bangla
Bhutani
Bihari
7273 Norwegian
7285 Oriya
7879 Telugu
7982 Thai
6890 Hungarian
6672 Icelandic
6682 Indonesian
6671 Interlingua
7789 Irish
7383 Panjabi
8065 Tonga
8083 Turkish
7065 Turkmen
8076 Twi
Breton
7378 Pashto, Pushto
7365 Persian
Bulgarian
Burmese
Byelorussian
Chinese
Croatian
Czech
7165 Polish
6669 Italian
7384 Portuguese
7465 Quechua
8084 Ukrainian
8185 Urdu
9072 Japanese
7282 Kannada
6783 Kashmiri
6865 Kazakh
7876 Kirghiz
6
7578 Rhaeto-Romance 8277 Uzbek
7583 Rumanian
7575 Russian
7589 Samoan
7579 Sanskrit
7585 Scots Gaelic
7679 Serbian
7665 Serbo-Croatian
7686 Shona
8279 Vietnamese
Danish
8285 Volapük
8377 Welsh
8365 Wolof
7168 Xhosa
8382 Yiddish
8372 Yoruba
8378 Zulu
Dutch
Korean
English
6978
6979
6984
7079
7074
7073
Kurdish
Laotian
Esperanto
Estonian
Faroese
Fiji
Latin
Latvian, Lettish
Lingala
7678
Finnish
Appendix 61
Trademarks and
Licenses
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S.
and worldwide patents issued & pending. DTS,
the Symbol, & DTS and the Symbol together are
registered trademarks & DTS 2.0+Digital Out is a
trademark of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™,
BONUSVIEW™ and the logos are trademarks of
the Blu-ray Disc Association.
“DVD Logo”is a trademark of DVD Format/Logo
Licensing Corporation.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are
trademarks, service marks, or certification marks
of the Digital Living Network Alliance.
“AVCHD”and the“AVCHD”logo are trademarks of
Panasonic Corporation and Sony Corporation.
Java is a trademark of Oracle and/or its affiliates.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
DivX®, DivX Certified® and associated logos are
trademarks of Rovi Corporation or its subsidiaries
and are used under license.
6
“x.v.Color”is a trademark of Sony Corporation.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
62 Appendix
Cinavia Notice
This product uses Cinavia technology to limit the
use of unauthorized copies of some commercially-
produced film and videos and their soundtracks.
When a prohibited use of an unauthorized copy is
detected, a message will be displayed and playback
or copying will be interrupted.
More information about Cinavia technology
is provided at the Cinavia Online Consumer
request additional information about Cinavia by
mail, send a postcard with your mailing address
to: Cinavia Consumer Information Center, P.O. Box
86851, San Diego, CA, 92138, USA.
This product incorporates proprietary technology
under license from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S.
and worldwide patents issued and pending as well
as copyright and trade secret protection for certain
aspects of such technology. Cinavia is a trademark
of Verance Corporation. Copyright 2004-2012
Verance Corporation. All rights reserved by Verance.
Reverse engineering or disassembly is prohibited.
6
Appendix 63
Specifications
General
Power requirements
Power consumption
Dimensions (W x H x D)
Net Weight (Approx.)
Operating temperature
Operating humidity
Refer to main label on the rear panel.
12 W
Approx. 360 mm x 39.5 mm X 199 mm
1.4 kg
5 °C to 35 °C
5 % to 90 %
Outputs
HDMI OUT (video/audio)
19 pin (Type A, HDMI™ Connector)
0.5 V (p-p), 75 Ω, RCA jack x 1
DIGITAL AUDIO OUT (COAXIAL)
System
Laser
Semiconductor laser
wavelength
Signal system
LAN port
405 nm / 650 nm
Standard PAL/NTSC color TV system
Ethernet jack x 1, 10BASE-T / 100BASE-TX
DC 5 V 0500 mA
Bus Power Supply (USB)
Design and specifications are subject to change without notice.
y
6
64 Appendix
Notes on discs
Maintenance
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on the
disc.
Handling the unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Storing discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Cleaning discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
Keeping the exterior surfaces clean
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
Do not use volatile liquids such as insecticide
spray near the unit.
y
y
y
Wiping with strong pressure may damage the
surface.
Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Maintaining the unit
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
6
Appendix 65
Important Information
Relating to Network
Services
All information, data, documents, communications,
downloads, files, text, images, photographs,
graphics, videos, webcasts, publications, tools,
resources, software, code, programs, applets,
widgets, applications, products and other content
(“Content”) and all services and offerings (“Services”)
provided or made available by or through any
third party (each a“Service Provider”) is the sole
responsibility of the Service Provider from whom it
originated.
The availability of and access to Content and
Services furnished by the Service Provider through
the LGE Device are subject to change at any time,
without prior notice, including, but not limited to
the suspension, removal or cessation of all or any
part of the Content or Services.
Should you have any inquiry or problem related
to the Content or Services, you may refer to the
Service Provider’s website for the most up-to-
date information. LGE is neither responsible nor
liable for customer service related to the Content
and Services. Any question or request for service
relating to the Content or Services should be made
directly to the respective Content and Service
Providers.
6
Please note that LGE is not responsible for any
Content or Services provided by the Service
Provider or any changes to, removal of, or cessation
of such Content or Services and does not warrant
or guaranty the availability of or access to such
Content or Services.
|