LG ACC98WK T User Manual

UW93_DUSALL_ENG_2913 9/17/08 12:13 PM Page 1  
Model: ACC98WK (ACC98WK-T, ACC98WK-R)  
For service/  
support Call:  
Toll Free Number  
1-800-243-0000  
© Copyright 2008, LG Electronics U.S.A., Inc.  
UW93_DUSALL_ENG_2913 9/17/08 12:13 PM Page 3  
Copyrights  
IMPORTANT SAFETY  
INSTRUCTIONS  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in  
public, or rent copyrighted material without permission. This product features  
the copy protection function developed by Macrovision. Copy protection signals  
are recorded on some discs. When recording and playing the pictures of these  
discs picture noise will appear. This product incorporates copyright protection  
technology that is protected by method claims of certain U.S. patents and other  
intellectual property rights owned by Macrovision Corporation and other rights  
owners. Use of this copyright protection technology must be authorized by  
Macrovision Corporation, and is intended for home and other limited viewing  
uses only unless otherwise authorized by Macrovision Corporation. Reverse  
engineering or disassembly is prohibited.  
1. Read these instructions.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in accordance with the  
manufacturer's instructions.  
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION  
TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND  
MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF  
525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED  
THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD  
DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV  
SET COMPATIBILITY WITH THIS MODEL 525p UNIT, PLEASE CONTACT  
OUR CUSTOMER SERVICE CENTER.  
8. Do not install near any heat sources such as radiators, heat registers,  
stoves, or other apparatus (including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A  
polarized plug has two blades with one wider than the other. A grounding  
type plug has two blades and a third grounding prong. The wide blade or  
the third prong are provided for your safety. If the provided plug does not fit  
into your outlet, consult an electrician for replacement of the obsolete  
outlet.  
10. Protect the power cord from being walked on or pinched particularly at  
plugs, convenience receptacles, and the point where they exit from the  
apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with the cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the apparatus. When a cart is used, use caution  
when moving the cart/apparatus combination to avoid injury from tip-over.  
13. Unplug this apparatus during lightning storms or when unused for long  
periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required  
when the apparatus has been damaged in any way, such as power-supply  
cord or plug is damaged, liquid has been spilled or objects have fallen into  
the apparatus, the apparatus has been exposed to rain or moisture, does  
not operate normally, or has been dropped.  
3
UW93_DUSALL_ENG_2913 9/17/08 12:13 PM Page 4  
Welcome to your new Wireless Kit  
Contents  
Setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6  
LED indicator of Wireless Transmitter . . . . . . . . . . . . .7  
LED indicator of Wireless Receiver . . . . . . . . . . . . . .7  
Setting an ID of Wireless Transmitter . . . . . . . . . . . . .7  
Specifications  
Wireless Transmitter  
External dimensions (WxHxD)  
Net Weight  
52.8x140x110.5 mm.  
0.14 kg  
Transmission  
Power Supply  
2.4 GHz  
DC 7.5V max  
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects  
filled with liquids, such as vases, should be placed on the apparatus.  
Wireless Receiver  
CAUTION concerning the Power Cord  
Most appliances should be placed on a dedicated circuit;  
Power requirements  
Power consumption  
External dimensions (WxHxD)  
Net Weight  
Reception Output  
Amplifier  
120V ~ 60Hz  
50W  
64x252.3x213.6 mm  
1.2 kg  
2.4 GHz  
155 W + 155 W  
That is, a single outlet circuit which powers only that appliance and has no additional outlets or  
branch circuits. Check the specification page of this owner's manual to be certain.  
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension  
cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these  
conditions could result in electric shock or fire. Periodically examine the cord of your appliance,  
and if its appearance indicates damage or deterioration, unplug it, discontinue use of the  
appliance, and have the cord replaced with an exact replacement part by an authorized servicer.  
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked,  
pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the  
point where the cord exits the appliance.  
Designs and specifications are subject to change without  
pior notice.  
To disconnect power from the unit, unplug the unit from the outlet. When installing the product,  
ensure that the plug is easily accessible.  
4
UW93_DUSALL_ENG_2913 9/17/08 12:13 PM Page 5  
Setting up  
Attaching the speakers to the Wireless Receiver  
a
b
Connect the power cord of the Wireless Receiver to the outlet.  
Connect the wires to the Wireless Receiver.  
Connect the Wireless Receiver and the rear speaker (right, left) with the speaker cable.  
b
Attaching the  
Wireless Transmitter  
to the DVD receiver  
a
b
Connect the adaptor to the  
outlet and transmitter.  
Connect the SOUND  
a
SIGNAL connector of the  
Wireless Transmitter and  
rear (right, left) speaker of  
the main set with the  
sound signal cable.  
c
Connect the Ground cable  
to the DVD receiver.  
Be sure to connect the ground  
cable to the rear panel of the  
unit by using the screw in rear  
panel. If this is not connected,  
the wireless system will be  
come noise.  
a
c
b
a
b
5
UW93_DUSALL_ENG_2913 9/17/08 12:13 PM Page 6  
Setting up  
Be careful of the following  
About Ferrite Core (for EMI only) (optional)  
Set the distance between this unit and Wireless Receiver within 10m.  
Optimum performance can be implemented only when the Wireless  
Transmitter and the Wireless Receiver within distance of 2m to 10m is used  
since communication failure may occur if longer distance is used.  
Be sure to match the speaker cable to the appropriate terminal on the  
components: + to + and – to –. If the cables are reversed, the sound will be  
distorted and will lack bass.  
It takes a few seconds (and may take longer) for the Wireless Transmitter and  
Wireless Receiver to communicate with each other.  
When the unit is turned off, the Wireless Transmitter is in standby mode (off)  
automatically after about 10 seconds.  
Be sure to attach the ferrite core to the speaker cables (for connecting to  
this unit).  
This ferrite core can reduce noises.  
How to attach the ferrite core (optional)  
1
2
Press the stopper [a] of the ferrite core to open.  
Wind the cable once on the ferrite core. Attach the ferrite core near the  
unit (Refer to the fig.3 and comment.).  
3
Close the ferrite core until it clicks.  
If the Wireless Transmitter is turned off, the Wireless Receiver will not  
function.  
(fig.3)  
The length  
here is as  
short as  
possible.  
6
UW93_DUSALL_ENG_2913 9/17/08 12:13 PM Page 7  
LED indicator of Wireless  
Transmitter  
Setting an ID of Wireless  
Transmitter  
Operation  
When the unit is manufactured, the ID is already set. If an interference  
occurs or you use a new Wireless Receiver, an ID is set again.  
LED color  
BLUE  
The main set is turned on, everything is connected  
and transmitting.  
ON Wireless Kit  
RED  
The wireless transmitter is in standby mode.  
The adaptor is disconnected to the outlet.  
1 Connect the SOUND SIGNAL connector of  
transmitter and the rear (right, left) speaker  
terminals of main unit with the SOUND  
OFF (No display)  
SIGNAL cable.:  
-
2 Connect the adaptor to the outlet  
and transmitter.:  
LED indicator of Wireless  
Receiver  
-
3 Turn off the Wireless Receiver:  
POWER Switch  
4 Press the ID. for more than 3 seconds:  
The Blue LED indicator will quickly flicker  
Operation  
LED color  
ID.  
BLUE  
The Wireless Receiver is receiving a signal of  
wireless transmitter  
5 Turn on the Wireless Receiver:  
POWER Switch  
.
RED  
The Wireless Receiver is in standby mode.  
The Wireless Receiver is turned off.  
Be careful of the following  
OFF (No display)  
If there is a strong electromagnetic wave product nearby, interference may  
occur. Put the unit (Wireless Receiver and main unit) away from there.(Ex:  
Microwave oven)  
If there is no audio signal for longer than 10 minutes, the Wireless Receiver  
and Wireless Transmitter will be automatically switched to standby mode. In  
power saving mode, both LEDs will turn red. LEDs will turn blue when there is  
any audio signal back.  
If you operate main unit then wireless speakers (rear speakers) sound within a  
few seconds in standby mode.  
7
UW93_DUSALL_ENG_2913 9/17/08 12:13 PM Page 8  
LG Electronics, Inc.  
Limited Warranty - USA  
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or workmanship, under normal use, during the  
warranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original consumer purchase of the product. This warranty is good  
only to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.  
WARRANTY PERIOD:  
HOW SERVICE IS HANDLED:  
LABOR: 90 days from the Date of Purchase.  
Call 1-800-243-0000 for instructions on getting the defective unit repaired or  
replaced.  
PARTS: One Year from the Date of Purchase.  
Please retain dated sales receipt and your box to return the unit to LG for  
repair or replacement.  
* Parts replaced are warranted for the remaining portion of the original  
warranty period.  
Shipping both ways will be paid by LG during the first 90 days of the Warranty  
Period. During the remainder of the Warranty Period (91-365 days), you pay  
inbound shipping charges and LG pays return shipping charges.  
Visit our website at: http://us.lgservice.com  
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN  
DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL,  
INDIRECT, SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT  
LIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER  
DAMAGE WHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential  
damages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights  
and you may also have other rights that may vary from state to state.  
THIS LIMITED WARRANTY DOES NOT APPLY TO:  
• Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration, maintenance or failure to maintain, or separate  
system components; and  
• Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside environmental specifications or contrary to the  
requirements or precautions in the Operating Guide, accident, lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical  
current or voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer software, institutional or commercial use, or  
other causes not arising out of defect in material or workmanship.  
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.  
CUSTOMER INTER-ACTIVE CENTER NUMBERS:  
For nearest Authorized Service Center, Where to buy, Product  
Assistance, or Customer Assistance  
Call 1-800-243-0000 (24 hours a day, 365 days per year) and select  
appropriate options from the menu.  
Or visit our website at http://us.lgservice.com  
LG ELECTRONICS U.S.A., INC.  
1000 SYLVAN AVENUE  
P/NO : MFL42932913  
Issue O  
ENGLEWOOD CLIFFS, NJ.  
Printed in China  

Taylor 1520 User Manual
Sterling Power Products Ab12210 User Manual
Sanyo Kms2472 User Manual
Samsung As18cm1n User Manual
Milwaukee Tools Battery Charger 48 59 0231 User Manual
LG MT58 User Manual
Lexmark 387 User Manual
Defiant Motion Security Light User Manual
CRAFTSMAN 580.325610 User Manual
CRAFTSMAN 113.206891 User Manual