LG Digital Signage
(MONITOR SIGNAGE)
55VH7B
55VM5B
AAA
(M4 x L6)
(M6 x L14)
*MFL69272303*
P/No: MFL69272303 (1708-REV04)
Source PCB
COF Cable
You can download the owner’s manual for this product at the following websites.
(Keyword: VH7B, VM5B)
ENGLISH
Руководство пользователя для данного устройства можно скачать на следующих
веб-сайтах. (Ключевое слово: VH7B, VM5B)
РУССКИЙ
Бұл өнімге арналған пайдаланушы нұсқаулығын төмендегі веб-сайттардан
жүктеп алуға болады. (Негізгі сөз: VH7B, VM5B)
ҚАЗАҚША
УКРАЇНСЬКА
O’ZBEKCHA
Завантажити посібник користувача для цього виробу можна на веб-сайтах, поданих
нижче. (Ключове слово: VH7B, VM5B)
Quyidagi veb-saytlarda ushbu mahsulot uchun foydalanuvchi qo’llanmasini yuklab olish-
ingiz mumkin. (Kalit so’z: VH7B, VM5B)
TÜRKÇE Bu ürünün kullanıcı kılavuzunu aşağıdaki web
sitelerinden indirebilirsiniz. (Anahtar sözcük: VH7B, VM5B)
1
1
2
3
5
7
4
6
8
9
2-1
HDMI OUT
DP OU
T
RGB OUT AUDIO OUT
DVI OUT
AUDIO OUT
2-2
HDMI OUT
DVI OUT
Network
3
4
2
AC-IN
1
1
2
4
3
5
1
600
2
(M6 x L14)
(M4 x L6)
3
OWNER’S MANUAL
LG Digital
Signage
(MONITOR SIGNAGE)
Please read this manual carefully before operating your set and retain it
for future reference.
55VH7B
55VM5B
2
TABLE OF CONTENTS
17 MAKING CONNECTIONS
3
SAFETY PRECAUTIONS
17
17
17
19
Connecting to a PC
3
4
Precautions In Installing the Product
External Device Connection
Using the Input List
Precautions to the AC Adapter and
Electrical Power
5
5
5
Precautions In Moving the Product
Precautions In Using the Product
Mounting on a Wall
Daisy Chain Monitors
20 TROUBLESHOOTING
6
LICENSES
23 PRODUCT SPECIFICATIONS
7
ASSEMBLY AND PREPARATION
7
Optional Accessories
9
Parts and Buttons
9
To Install in a Portrait Layout
Remove brackets before Installation
9
10
STORAGE METHOD FOR PANEL
PROTECTION
10
10
11
- Correct Method
- Incorrect Method
Installing on a Wall
13
EXTERNAL EQUIPMENT SETUP
13
13
- IR RECEIVER
Tiling Displays
13
14
- How to Mount the Set
- How to Join Sets
15 REMOTE CONTROL
3
► This may cause injury and/or damage to the product.
Safety precautions
Please read these safety precautions carefully before using the
product.
• When connecting it to a game device, keep a distance of four times
the diagonal measurement of the screen from the device.
► If the product falls because of the short cable, this may cause injury
and/or damage to the product.
• Leaving a fixed image on the screen for a long time may cause
damage to the screen and cause image burn-in. To use the product
for a long period of time, use a screen saver on the PC or utilize
the residual image prevention function on the product, and when
the product is not used, turn off the power. Burn-in and related
problems are not covered by the warranty on this product.
• Do NOT install this product on a wall where there is high risk of
exposure to oil fumes or mist.
WARNING
If you ignore the warning message, you may be seriously injured
or there is a possibility of accident or death.
CAUTION
If you ignore the caution message, you may be slightly injured or
the product may be damaged.
► This may damage product and cause it to fail.
CAUTION
WARNING
• Indoor Use Only.
• Make sure the product ventilation holes are not blocked. Install
the product in a suitably wide place (more than 100 mm from
the wall)
► If you install the product too close to the wall, it may be deformed or
fire can break out due to internal heat.
• Do not block the ventilation hole of the product by a tablecloth
or curtain.
► The product can be deformed or fire can break out due to overheating
inside the product.
• Install the product on a flat and stable place that has no risk of
dropping the product.
► If the product is dropped, you may be injured or the product may
be broken.
• Install the product where no EMI occurs.
• Keep the product away from direct sunlight.
Precautions In Installing the
Product
WARNING
• Keep away from heat sources like electrical heaters.
► Electrical shock, fire, malfunction, or deformation may occur.
• Keep the packing anti-moisture material or vinyl packing out of
the reach of children.
► Anti-moisture material is harmful if swallowed. If swallowed by
mistake, force the patient to vomit and visit the nearest hospital.
Additionally, vinyl packing can cause suffocation. Keep it out of the
► The product can be damaged.
• If you install the product in a place that does not meet the
recommended conditions, this may cause serious damage to the
product’s picture quality, life cycle, and appearance. Please check
with LG or a qualified installer before installing. This caution
applies to a place where there is an abundance of fine dust or oil
mist, chemical substances are used, the temperature is very high
or low, the humidity is very high, or the product is likely to remain
turned on for a long period of time (airport and train station).
failure to do so will invalidate the warranty.
• Do not install the product in an area with poor ventilation (e.g.on
a bookshelf, in a closet) or outside and avoid placing on cushions
or carpets.
• In addition, do not install it where there are heating objects such
as lighting equipment.
reach of children.
• Do not put heavy objects on the product or sit upon it.
► If the product collapses or is dropped, you may be injured. Children
must pay particular attention.
• Do not leave the power or signal cable unattended on the
pathway.
► The passerby can trip or fall, which can cause electrical shock, fire,
product breakdown, or injury.
• Install the product in a neat and dry place.
► Dust or moisture can cause electrical shock, fire or product damage.
• If you can smell smoke or other odors or hear a strange sound
unplug the power cord and contact the service center.
► If you continue to use without taking proper measures, electrical
shock or fire can occur.
• If you dropped the product or the case is broken, turn off the
product and unplug the power cord.
► If you continue to use without taking proper measures, electrical
shock or fire can occur. Contact the service center.
• Do not drop an object on or apply impact to the product. Do not
throw any toys or objects on the product screen.
► It can cause injury to human, problem to product and damage the
display.
• Do not let the product fall or drop when connecting it with an
external device.
4
• As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if the unit is turned
off.
Precautions to the AC Adapter
and Electrical Power
CAUTION
WARNING
• Be sure to keep the outlet, AC adapter, and pins of the power plug
• If water or any foreign substance goes inside the product (TV,
monitor, power cord, or AC adapter), disconnect the power cord
immediately and contact the service center.
clean from dust and etc.
► This may cause a fire.
• Do not unplug the power cord while the product is in use.
► Otherwise, this may cause a fire or electric shock due to damage to
the product.
► Electrical shock can damage the product.
• Use only the power cord supplied with the unit. If you use another
power cord, make sure that it is certified by the applicable national
standards when not provided by the supplier. If the power cable is
faulty in any way, please contact the manufacturer or the nearest
• Do not touch the power plug or AC adapter with wet hands. If the
pins of the plug are wet or dusty, wipe and dry them before use.
► Otherwise, this may cause a fire or electric shock.
• Make sure to completely insert the power cord into the AC adapter.
► If loosely connected, the poor connection may cause a fire or electric
shock.
authorized repair service provider for a replacement.
• Be sure to use power cords and AC adapters provided or approved
by LG Electronics, Inc.
► The use of non-approved products may cause a fire or electric shock.
• When unplugging the power cord, always pull it by the plug. Do
not bend the power cord with excessive force.
► The power line can be damaged, which may cause electric shock
or fire.
• Be careful not to step or place heavy objects (electronic appliances,
clothing, etc.) on the power cord or AC adapter. Be careful not to
damage the power cord or AC adapter with sharp objects.
► Damaged power cords may cause a fire or electric shock.
• Never disassemble, repair or modify the power cord or AC adapter.
► This may cause a fire or electric shock.
• Make sure to connect the power cable to the grounded current.
► You may be electrocuted or injured.
• Use the rated voltage only.
► The product can be damaged, or you may be electrocuted.
• In the presence of thunder and lightning, never touch the power
cord and signal cable because it can be very dangerous.
► It can cause electric shock.
• Do not connect several extension cords, electrical appliances,
or electrical heaters to a single outlet. Use a power strip with a
grounding terminal designed for exclusive use with the computer.
► A fire can break out due to overheating.
• Do not touch the power plug with wet hands. Additionally, if
the cord pin is wet or covered with dust, dry the power plug
completely or wipe dust off.
► You may be electrocuted due to excess moisture.
• If you don't intend to use the product for a long time, unplug the
power cable from the product.
► Covering dust can cause a fire, or insulation deterioration can cause
electric leakage, electric shock or fire.
• Fix the power cable completely.
► If the power cable is not fixed completely, a fire can break out.
• Do not insert a conductor (like a metal chopstick) into one end
of the power cable while the other end is connected to the input
terminal on the wall. Additionally, do not touch the power cable
right after plugging into the wall input terminal.
► You may be electrocuted.
• The appliance coupler is used as the disconnect device.
• Please make sure the device is installed near the wall outlet to
which it is connected and that the outlet is easily accessible.
5
• Do not press strongly upon the panel with a hand or sharp object
such as nail, pencil, or pen, or make a scratch on it.
• Keep the proper distance from the product.
► Your vision may be impaired if you look at the product too closely.
• Set the appropriate resolution and clock by referring to the User’s
Guide.
Precautions In Moving the
Product
WARNING
• Make sure to turn off the product.
► Your vision can be impaired.
► You may be electrocuted or the product can be damaged.
• Make sure to remove all cables before moving the product.
• Use authorized detergent only when cleaning the product. (Do not
use benzene, thinner, or alcohol.)
► You may be electrocuted or the product can be damaged.
• Make sure the panel faces forward and hold it with both hands to
move. If you drop the product, the damaged product can cause
electric shock or fire. Contact an authorized the service center for
repair.
• Make sure the product is turned off, unplugged, and all cables
have been removed. It may take 2 or more people to carry larger
apparatus. Do not press against or put stress on the front panel of
the apparatus.
► Product can be deformed.
• Do not expose to dripping or splashing and do not place objects
filled with liquids, such as vases, cups, etc. on or over the
apparatus (e.g. on shelves above the unit).
• Batteries should not be exposed to excessive heat. For example,
keep away from direct sunlight, open fireplace, and electric
heaters.
• Do NOT place non-rechargeable batteries in charging device.
• Using headsets (earphones) for a long time or listening loudly can
cause damage to your hearing.
• Spray water onto a soft cloth 2 to 4 times, and use it to clean the
front frame; wipe in one direction only. Too much moisture may
cause staining.
CAUTION
• Do not shock the product when moving it.
► You may be electrocuted or the product can be damaged.
• Do not dispose the product-packing box. Use it when you move.
Precautions In Using the
Product
WARNING
• Do not use products using high voltage around the Monitor.
(e.g., a bug zapper)
• Do not disassemble, repair or modify the product at your own
discretion.
► Monitor may have malfunction as its electrical shock.
► Fire or electric shock accident can occur.
► Contact the service center for check, calibration or repair.
• When the display is to be left unattended for an extended period
of time, unplug it from the wall outlet.
• Keep the product away from water.
► Fire or electric shock accident can occur.
• Do not shock or scratch the front and sides of the screen with
metallic objects.
Mounting on a Wall
• Do NOT install this product by yourself as you may injure yourself
or cause damage to product. Please contact service personnel
authorised by manufacturer.
► Otherwise, it may cause damage to the screen.
• Avoid high temperatures and humidity.
CAUTION
• Do not put or store inflammable substances near the product.
► There is a danger of explosion or fire due to careless handling of the
inflammable substances.
• When cleaning the product, unplug the power cord and scrub
gently with a soft cloth to prevent scratching. Do not clean with a
wet cloth or spray water or other liquids directly onto the product.
An electric shock may occur. (Do not use chemicals such as
benzene, paint thinners, or alcohol)
• Take a rest from time to time to protect your vision.
• Keep the product clean at all times.
• Take a comfortable and natural position when working with a
product to relax the muscles.
• Take a regular break when working with a product for a long time.
6
LICENSES
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX®
video.
registration code in the DivX VOD section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p,including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are
used under license.
Covered by DivX Patents 7,295,673; 7,515,710; RE45,052; and others available at
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
Licensing Limited. DTS, DTS-HD, the Symbol, & DTS or DTS-HD and the Symbol
together are registered trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.
7
ASSEMBLY AND PREPARATION
CAUTION
• Always use genuine components to ensure safety and product performance.
• The product warranty will not cover damage or injury caused by the use of counterfeit components.
NOTE
• The accessories provided with your product may vary depending on the model or region.
• Product specifications or contents in this manual may be changed without prior notice due to upgrade of
product functions.
• SuperSign Software & Manual
- Downloading from the LG Electronics website.
- Visit the LG Electronics website (http://partner.lge.com) and download the latest software for your model.
• Product damage from moving or changing the installation location is not covered by warranty.
• The warranty will not cover any damage caused by using the product in an excessively dusty environment.
Optional Accessories
Without prior notice, optional accessories are subject to change to improve the performance of the product,
and new accessories may be added. The illustrations in this manual may differ from the actual product and
accessories.
AN-WF500
Wi-Fi Dongle kit
8
Connecting
Cable
KT-OPSA
Screws
Card
(Easy Setup Guide)
Power Cord
OPS kit
NOTE
• Optional accessories are available for some models. If necessary, please purchase them separately.
• Please turn off the power before connecting or removing the Wi-Fi dongle kit.
9
Parts and Buttons
To Install in a Portrait Layout
The image may be different according to the model.
When installing in a Portrait Layout, rotate the
monitor clockwise 90 degrees (when facing the
screen).
Remove brackets before
Installation
Make sure that the protection pads are removed
from each corner before installing the product.
Buttons
INPUT: Changes the input source.
MENU: Accesses the main menus, or saves
your input and exits the menus.
UP/DOWN: Adjust the up and down.
L/R: Moves left and right.
AUTO/SET: Displays the current signal and
mode.
y
y
y
y
y
/I: Turns the power on or off.
y
NOTE
• Keep the removed protection pads and use
them when moving the product later.
10
STORAGE METHOD FOR PANEL PROTECTION
Correct Method
Incorrect Method
Panel
Panel
If the product needs to be set upright, hold both
sides of the product, and tilt backward carefully for.
Do not let the panel to touch the floor.
If the product is tilted onto the bezel, the bottom
of the panel may be damaged.
Panel
Cushion
Panel
When laying down the product, lay a cushion on
a flat floor. Put the product on it with the panel of
the product facing down.
Panel
If the product is tilted onto the edge of the panel,
the panel may be damaged.
If there is not a cushion available, ensure the floor
is clean and then lay the product down carefully
with the panel facing either upward or downward.
At this time, be careful for objects not to fall on the
panel.
11
Installing on a Wall
To install the Monitor on a wall (optional), use the
VESA screws provided as accessories to fasten it.
CAUTION
• Disconnect the power cord before moving or
installing the monitor to avoid risk of electric
shock.
100 mm
200 mm
• If you install the monitor on a ceiling or slanted
wall, it may fall and result in injury. Use an
authorized LG wall mount and contact your local
dealer or qualified personnel to assist with the
installation.
100 mm
100 mm
• Do not over tighten the screws as this may
damage the monitor and void your warranty.
• Use only screws and wall mounting brackets
that meet the VESA standard. Any damage or
injuries caused by misuse or use of improper
accessories are not covered by the warranty.
• To prevent injury, this apparatus must be
securely attached to the wall in accordance with
the installation instructions. (This pertains only
to Australia and New Zealand.)
100 mm
Install the monitor at least 200 mm away from the
wall and leave about 100 mm of space at each side
of the monitor to ensure sufficient ventilation.
Use the wall mount plate and screws that comply
with the VESA standard.
NOTE
• Do not install the product in a place with no
ventilation (e.g., on a bookshelf or in a closet)
or on a carpet or cushion. If there is no other
option but to mount the product on the wall,
make sure that sufficient ventilation is provided
before installation.
- Failure to do so may result in a fire due to the
increase in the internal temperature.
• The illustration shows a general example of
installation and may look different from the
actual product.
12
1
Insert and tighten the eyebolts, or brackets and
bolts on the back of the monitor.
Securing the monitor to a wall (optional)
(Depending on model)
- If there are already bolts inserted in the
eyebolts’position, remove the other bolts first.
2
3
Mount the wall brackets with the bolts to the
wall. Match the location of the wall bracket and
the eyebolts on the rear of the monitor.
Connect the eyebolts and wall brackets tightly
with a sturdy cord.
Make sure the securing cord is horizontal with
the flat surface.
WARNING
• If the monitor is not positioned in a sufficiently stable location, there is a danger that it will fall. Many injuries,
particularly to children, can be avoided by taking simple precautions such as:
» Only using furniture that can safely support the monitor.
» Ensuring the monitor is not overhanging the edge of the supporting furniture.
» Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both
the furniture and the monitor to a suitable support.
» Not placing cloth or other materials between the monitor and supporting furniture.
» Educating children about the dangers of climbing on furniture to reach the monitor or its controls.
CAUTION
• Make sure that children do not climb on or hang from the monitor.
NOTE
• Use a platform or cabinet that is large and strong enough to support the monitor securely.
• Brackets, bolts, and cords are sold separately. You can obtain additional accessories from your local retail
store.
• The illustration shows a general example of installation and may look different from the actual product.
13
EXTERNAL EQUIPMENT SETUP
IR RECEIVER
This allows a remote control sensor to be placed in a custom location. Then that display can control other
displays via an RS-232C cable.
Tiling Displays
How to Mount the Set
Example of 2 x 2 Tiling
Using the screws for attaching the VESA wall mount, mount the set to the wall mount plate or the wall.
Screws for attaching the
VESA wall mount (M6)
600
14
How to Join Sets
1
Join other sets using screws for fixing the VESA wall mount in the same way as above.
Set 4 joined to the rest of the sets
(2 x 2 tiling)
2
After joining the sets, use the tiling guide to adjust the gap between the sets.
(M4 x L6)
3
Now the 2 x 2 tiling is complete.
You can tile in various combinations, such as 3 x 3.
NOTE
• The load applied to each set should be supported by the wall mount plate or the wall using a VESA wall
mount (600 x 400).
• The load applied to each set should be supported by the wall mount plate using a VESA wall mount. (Each
set must be firmly mounted to the wall mount plate or the wall.)
• You may mount the set without using the tiling guide; this does not affect the performance of the device.
• The screws are enclosed with the other components in the box, including the tiling guides.
15
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please read this manual
carefully to use the monitor correctly.
To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the
labels inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the actual
accessories.
CAUTION
• Do not mix old and new batteries, as this may
damage the remote control.
• Be sure to point the remote control toward the
remote control sensor on the monitor.
(POWER) Turns the monitor on or off.
MONITOR ON Turns the monitor on.
MONITOR OFF Turns the monitor off.
ENERGY SAVING Adjusts the brightness of the picture to reduce energy
consumption.
INPUT Selects the input mode.
3D Used for viewing 3D videos. (This model does not support this.)
1/a/A Toggles between numerical and alphabetical.
(Depending upon the model, this feature may not be supported.)
Number and Alphabet buttons
Enters numerical or alphabetical characters depending upon the setting.
(Depending upon the model, this feature may not be supported.)
CLEAR Deletes the entered numerical or alphabetical character.
(Depending upon the model, this feature may not be supported.)
Volume Up/Down Button Adjusts the volume.
ARC Selects the Aspect Ratio mode.
AUTO Automatically adjusts picture position and minimizes image
instability (available for RGB input only). (Depending upon the
model, this feature may not be supported.)
MUTE Mutes all sounds.
BRIGHTNESS Adjusts the brightness of the display. PAGE function is not
supported in this model. (Depending upon the model, this
feature may not be supported.)
16
PSM Selects the Picture Mode.
HOME Activates the Launcher.
W.BAL Enters the White Balance menu.
SETTINGS Accesses the main menus or saves your input and exit menus.
S.MENU SuperSign menu key (Depending upon the model, this feature
may not be supported.)
Navigation Buttons Scrolls through menus or options.
OK Selects menus or options and confirms your input.
BACK Allows you to move back one step in the user interaction function.
EXIT Quit all OSD tasks and applications.
Allows you to control various multimedia devices to enjoy
multimedia simply by using the remote control through
the SimpLink menu. (Depending upon the model, this
feature may not be supported.)
TILE Selects the TILE Mode.
PICTURE ID ON/OFF When the Picture ID number matches the Set ID
number, you can control whichever monitor you
want in multi-display format.
USB Menu Control Buttons Controls media playback.
17
MAKING CONNECTIONS
You can connect various external devices to your monitor. Change the input mode and select the external
device you want to connect.
For more information about external device connections, see the user manual provided with each device.
Connecting to a PC
Some of the cables are not provided.
This monitor supports the Plug and Play* feature.
* Plug and Play: a feature that enables a PC to recognize devices attached by the user without device
configuration or user intervention when powering up.
External Device Connection
Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode.
Some of the cables are not provided. For the best picture and sound quality, connecting external devices to
your monitor using HDMI cables is recommended.
Using the Input List
y
RGB, HDMI, DVI-D, DISPLAYPORT, OPS, COMPONENT, AV
18
NOTE
• For the best image quality, using the monitor with HDMI connection is recommended.
• To comply with the standard specifications of the product, use a shielded interface cable with a ferrite core,
such as a DVI-D cable.
• If you turn the monitor on when the set is cold, the screen may flicker. This is normal.
• Sometimes red, green, or blue spots may appear on the screen. This is normal.
• Use a High Speed HDMI®/TM cable.
• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may
not display or a connection error may occur.
• Recommended HDMI Cable Types
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
• If you cannot hear any sound in HDMI mode please check your PC settings. Some PCs require you to
manually change the default audio output to HDMI.
• If you want to use HDMI-PC mode, you must set your PC/DTV to PC mode.
• You may experience compatibility issues if you use HDMI-PC mode.
• Make sure the power cable is disconnected.
• If you connect a gaming device to the monitor, use the cable provided with the gaming device.
• High Speed HDMI®/TM cables transmit a HD signal up to 1080p and higher.
• Use the standard Macintosh adapter since an incompatible adapter is available in the market. (Different
signaling system)
• Apple computers may require an adapter to connect to this monitor. Call or visit their web site for more
information.
• When connecting to the component port using the shared interface, the port must match up to the input
source. Otherwise, noise may occur.
• When connecting an external audio device, use a device with audio amplifier.
CAUTION
• Connect the signal input cable and tighten it by turning the screws clockwise.
• Do not press the screen with your finger for a prolonged period as this may result in temporary distortion on
the screen.
• Avoid displaying static images on the screen for a long period of time to prevent image burn. Use a
screensaver if possible.
• A wireless communication device near your monitor can affect the image.
19
Daisy Chain Monitors
To use different products connected to each other, connect one end of the signal input cable (DP Cable) to the
DP Out connector of Monitor 1 and connect the other end to the DP In connector of the other product.
Monitor 1
Monitor 2
Monitor 3
Monitor 4
NOTE
• If the signal cable between the product and your PC is too long, make sure to use the Booster or optical
cable.
• Daisy chaining the video output may be limited depending on the performance of the input device that
supports HDCP.
20
TROUBLESHOOTING
No image is displayed.
Problem
Action
Is the product power cord connected?
y Check if the power cord is correctly plugged into the power
outlet.
Does the “Invalid Format”message
appear?
y The signal from the PC (graphics card) is out of the vertical or
horizontal frequency range of the product. Adjust the frequency
range by referring to the Specifications in this manual.
Does the “No Signal”message appear?
y The signal cable between PC and product is not connected.
Check the signal cable.
y Press the INPUT menu in the remote Control to check the input
signal.
The Unknown Product message appears when the product is connected.
Problem
Action
Did you install the driver?
y Check if the Plug and Play function is supported by referring to
the graphics card user manual.
The screen image looks abnormal.
Problem
Action
Is the screen position wrong?
y Check if the graphics card resolution and frequency are
supported by the product. If the frequency is out of range, set to
the recommended resolution in the Control Panel Display Setting
menu.
The screen is displayed abnormally.
y The proper input signal is not connected to the signal port.
Connect the signal cable that matches with the source input
signal.
After-image appears on the product.
Problem
Action
After-image appears when the
product is turned off.
y If you use a fixed image for a long time, the pixels may be
damaged. Use the screen-saver function.
y When a dark image is displayed on the screen after an image
with high contrast (black and white or gray), this may cause
image sticking. This is normal for LCD screen products.
21
The audio function does not work.
Problem
Action
No sound?
y See if the audio cable is connected properly.
y Adjust the volume of the external device.
y See if the sound is set properly.
Sound is too dull.
Sound is too low.
y Select the appropriate equalizing sound of the external device.
y Adjust the volume of the external device.
Screen color is abnormal.
Problem
Action
Screen has poor color resolution (16
colors).
y Set the number of colors to more than 24 bits (true color). Select
Control Panel - Display - Settings - Color Table menu in Windows.
Screen color is unstable or
mono-colored.
y Check the connection status of the signal cable. Or, re-insert the
PC graphics card.
Do black spots appear on the screen?
y Several pixels (red, green, white, or black color) may appear
on the screen, which can be attributable to the unique
characteristics of the LCD panel. This is not a malfunction of the
LCD.
The operation does not work normally.
Problem
Action
The power suddenly turned off.
y Is the Timer set?
y Check the power control settings. Power interrupted.
NOTE
• The software-related contents may be changed without prior notice due to upgrade of the product
functions.
22
CAUTION
• Image sticking does not occur when using constantly changing images but may occur when using a fixed
image for an extended period of time. Therefore, it is recommended that you use the instructions below
to decrease the likelihood of image sticking occurring when using a fixed image. It is recommended that
you change the screen at least once every 12 hours at the very minimum; if done more frequently, the
prevention of image sticking is more effective.
Recommended operating conditions
Change the background and the character
colors using the same time interval.
1
Change the image using the same time
interval.
2
ID: UPM 123
PW: ****
ID: UPM 123
PW: ****
When changing colors, using complementary
colors helps to prevent image sticking.
Make sure that the characters or images before
changing the image remain in the same location
after changing the image.
What is image sticking?
Glass
BM
BM
BM
When the LCD panel displays a static image for an
extended period of time, it can cause a voltage
difference between the electrodes that operate
the liquid crystals. When the voltage difference
between the electrodes builds up over time, liquid
crystals have a tendency to remain aligned in
one direction. During this process, a previously
displayed image remains visible. This phenomenon
is referred to as image sticking.
CF
CF
CF
CF
OC
PI
LC
PI
TFT Layers
Glass
ITO or MoTi Pixel Layer
23
PRODUCT SPECIFICATIONS
The product specifications below may be changed without prior notice due to upgrade of product functions.
”refers to alternating current (AC), and “ ”refers to direct current (DC).
“
LCD screen
Video signal
Screen type
Thin Film Transistor (TFT)
Liquid Crystal Display (LCD) Screen
HDMI, DISPLAYPORT: 3840 x 2160 @ 30 Hz
RGB, DVI-D, OPS: 1920 x 1080 @ 60 Hz
Maximum resolution
- This may not be supported on some OS or graphic card
types.
Recommended
resolution
1920 x 1080 @ 60 Hz
- This may not be supported on some OS or graphic card
types.
Horizontal frequency
Vertical frequency
RGB : 30 kHz to 83 kHz
HDMI/OPS/DVI-D/DISPLAYPORT : 30 kHz to 83 kHz
RGB : 50 Hz to 75 Hz
HDMI/OPS/DVI-D/DISPLAYPORT : 56 Hz to 60 Hz
3840 x 2160 24p, 25p, 30p.
Synchronization
Separate Sync, Digital
Input/ Output ports
Embedded battery
IR IN, RS-232C IN/OUT, HDMI IN, DVI-D IN, DP IN/OUT,
USB 2.0 IN, USB3.0 IN, RGB/COMPONENT/AV IN,
AUDIO IN/OUT, LAN IN/OUT
Applied
Environmental
Conditions
Operating Temperature 0 °C to 40 °C
Operating Humidity
Storage Temperature
Storage Humidity
10 % to 80 %
-20 °C to 60 °C
5 % to 95 %
24
55VH7B
LCD screen
Pixel Pitch
0.630 mm (H) x 0.630 mm (V)
AC 100-240 V~ 50/60 Hz 2.7 A
On Mode: 220 W (Typ.)
Sleep Mode : ≤ 0.5 W
Off Mode: ≤ 0.5 W
Power
Rated Voltage
Power Consumption
Dimensions (Width x
Height x Depth) /
1211.4 mm x 682.2 mm x 86.5 mm / 18.6 kg
Weight
55VM5B
LCD screen
Power
Pixel Pitch
0.630 mm (H) x 0.630 mm (V)
Rated Voltage
Power Consumption
AC 100-240 V~ 50/60 Hz 2.7 A
On Mode: 160 W (Typ.)
Sleep Mode : ≤ 0.5 W
Off Mode: ≤ 0.5 W
Dimensions (Width x
Height x Depth) /
1211.4 mm x 682.2 mm x 86.5 mm / 18.6 kg
Weight
25
DVI-D (PC) Support Mode
RGB (PC) Support mode
Horizontal
Resolution
Vertical
frequency (Hz)
Horizontal
Resolution
Vertical
frequency (kHz)
frequency (kHz) frequency (Hz)
640 x 480
31.469
37.879
48.363
53.783
45
59.94
60.317
60
640 x 480
31.469
37.5
59.94
75
800 x 600
640 x 480
1024 x 768
1152 x 864
1280 x 720
1366 x 768
1280 x 1024
1600 x 900
1680 x 1050
1920 x 1080
720 x 400
31.468
37.879
46.875
49.725
48.363
60.023
53.783
45
70.8
59.959
60
800 x 600
60.317
75
800 x 600
47.712
63.981
60
59.79
60.02
60
832 x 624
74.55
60
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 1024
1280 x 1024
1360 x 768
1600 x 900
1680 x 1050
1920 x 1080
75.029
59.959
60
65.29
67.5
59.954
60
63.981
79.98
47.712
60
60.02
75.02
60.015
60
OPS (PC) Support Mode
Horizontal
Resolution
Vertical
frequency (Hz)
65.290
67.5
59.954
60
frequency (kHz)
640 x 480
31,469
59,94
60,317
60
800 x 600
37,879
48,363
53,783
45
1024 x 768
1152 x 864
1280 x 720
1280 X 800
1366 x 768
1280 x 1024
1600 x 900
1680 x 1050
1920 x 1080
59,959
60
HDMI / DISPLAYPORT (PC) Support Mode
49,702
47,712
63,981
60
59,81
59,79
60,02
60
Horizontal
frequency (kHz) frequency (Hz)
Vertical
Resolution
640 x 480
31.469
37.879
48.363
53.783
45
59.94
60.317
60
800 x 600
1024 x 768
1152 x 864
1280 x 720
1280 X 800
1366 x 768
1280 x 1024
1600 x 900
1680 x 1050
1920 x 1080
1920 x 1200
3840 x 2160
65,29
67,5
59,954
60
59.959
60
49.702
47.712
63.981
60
59.81
59.79
60.02
60
65.29
67.5
59.954
60
74.038
67.5
59.95
30
26
HDMI / DISPLAYPORT (DTV) Support Mode
NOTE
Horizontal
frequency (kHz) frequency (Hz)
Vertical
• When the cable is connected to the DVI-D,
HDMI or the Display Port, you can select the
PC/DTV mode optionally. It is recommended
that you select PC mode when connecting to a
PC and select DTV mode when connecting to
other devices. The DTV mode refers to all modes
excluding the PC mode.
• Vertical frequency: The product display
functions by the screen image changing dozens
of times every second like a fluorescent lamp.
The vertical frequency or refresh rate is the
number of image displays per second. The unit
is Hz.
• Horizontal frequency: The horizontal interval
is the time taken to display one horizontal line.
When 1 is divided by the horizontal interval,
the number of horizontal lines displayed every
second can be tabulated as the horizontal
frequency. The unit is kHz.
Resolution
480/60p
576/50p
720/50p
720/60p
1080/50i
1080/60i
1080/50p
1080/60p
1080/60p
2160/24p
2160/25p
2160/30p
31.5
31.25
37.5
45
60
50
50
60
28.1
33.75
56.25
67.432
67.5
54
50
60
50
59.94
60
24
56.25
67.5
25
30
Component Support Mode
Horizontal
Resolution
Vertical
frequency (kHz) frequency (Hz)
720 x 576
15.625
31.25
45
50
720 x 576
50
1280 x 720
1280 x 720
1280 x 720
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
60
37.5
50
44.96
31.25
56.25
33.75
33.72
67.5
59.94
50
50
60
59.94
60
Make sure to read the Safety Precautions
before using the product.
The model and serial numbers of the SET are
located on the back and one side of the SET.
ENERGY STAR® is a set of power-saving guidelines issued
by the U.S.Environmental Protection Agency (EPA).
As an ENERGY STAR® Partner LGE U. S.
A., Inc. has determined that this product
meets the ENERGY STAR® guidelines for
energy efficiency.
WARNING -This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may be
required to take adequate measures.
Refer to ENERGYSTAR.gov for more
information on the ENERGY STAR® program.
Temporary noise is normal when powering ON
or OFF this device.
MODEL
SERIAL
USER GUIDE
LG Digital
Signage
(MONITOR SIGNAGE)
Please read this manual carefully before operating your set and retain it for future
reference.
webOS 2.0
2
TABLE OF CONTENTS
3
USER SETTINGS
3
Main Menu Settings
3
8
9
11
- Picture Settings
- Sound Settings
- Network Settings
- General Settings
13 ENTERTAINMENT
13
Using My Media
13
15
18
20
20
20
21
21
- Connecting USB/SD Storage Devices
- Files Supported by My Media
- Viewing Videos
- Viewing Photos
- Listening to Music
- Settings
- Moving, Copying, or Deleting a File
SuperSign Contents
21
22
23
25
27
29
Information
Local Contents Scheduler
Screen Share
SuperSign EZ
Multi-Screen
PICTURE ID Settings
30 IR CODES
32 TO CONTROL MULTIPLE
PRODUCTS
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit
32
33
34
37
Connecting the Cable
Communication Parameter
Command Reference List
Transmission/Reception Protocol
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping, and handling)
This offer is valid for three (3) years from the
date on which you purchased the product.
3
NOTE
• The software-related contents may be changed without prior notice due to upgrade of the product
functions.
• Some features described in the Installation manual may not be supported in certain models.
• SNMP 2.0 is supported.
User Settings
Main Menu Settings
Picture Settings
To Select Picture Mode
Advanced
Picture
Picture Mode Settings
Picture Mode
Select the picture mode that is best suited to the video type.
• Vivid: adjusts the video image for a retail environment by enhancing the contrast, brightness, and
sharpness.
• Standard: adjusts the video image for a normal environment.
• APS: APS (Auto power saving ) mode reduces power consumption by dimming control.
• Cinema: optimizes the video image for watching movies.
• Sports: optimizes the video image for watching sports. Even fast actions such as kicking or throwing a ball
are rendered clearly on the screen.
• Game: optimizes the video image for playing videogames.
• Photo: Optimizes the screen for viewing photos. (This feature is available only with certain models.)
• Expert/Calibration: allows an expert, or anyone interested in high quality pictures, to manually tune the
picture for the best picture quality.
NOTE
• Depending on the input signal, the available Picture Modes may differ.
• Expert is an option that allows a picture quality expert to fine-tune the picture quality using a specific
image. Thus, it may not be effective for a normal picture.
4
To fine-tune the picture mode
Advanced Picture
Picture Mode Settings
Customize
• Backlight: adjusts the brightness of the screen by controlling the LCD backlight. The closer the value is to
100, the brighter the screen is.
• Contrast: adjusts the difference between the light and dark areas of the picture. The closer the value is to
100, the greater the difference is.
• Brightness: adjusts the overall brightness of the screen. The closer the value is to 100, the brighter the
screen is.
• Sharpness: adjusts the sharpness of the edges of objects. The closer the value is 50, the clearer and the
sharper the edge becomes.
• H Sharpness: adjusts the sharpness of the contrast edges on the screen from a horizontal point of view.
• V Sharpness: adjusts the sharpness of the contrast edges on the screen from a vertical point of view.
• Color: softens or deepens the tints on the screen. The closer the value is 100, the deeper the colors become.
• Tint: adjusts the balance between red and green levels displayed on the screen. The closer the value is to
Red 50, the deeper the color red becomes, and the closer the value is to Green 50, the deeper the color
green becomes.
• Color Temperature: adjusts the tints of the screen to evoke feelings of warmth or coolness.
• Advanced Controls/Expert Control: customizes the advanced options.
–
Dynamic Contrast:Optimizes the difference between the light and dark parts of the screen according to the
brightness of the image.
–
–
–
–
–
–
–
–
Super Resolution: Sharpens the blurry or indistinguishable parts of the picture.
Color Gamut: Selects the range of colors to display.
Dynamic Color: Adjusts the tint and saturation of the image for a more vivid and lively display.
Edge Enhancer: Provides much sharper and clearer edges to the picture.
Color Filter: Accurately adjusts color and tint by filtering a specific color area of RGB space.
Preferred Color: Adjusts the skin tint, grass tint, and sky tint to your preference.
Gamma: Adjusts the medium brightness of the image.
White Balance: Adjusts the overall tint of the picture to your preference. In Expert mode, you can fine-tune the
picture using the Method/Pattern options.
–
Color Management System: Experts use the color management system when they adjust the colors by using
the test pattern. The color management system allows you to make an adjustment
by selecting from among 6 different color spaces (Red/Yellow/Blue/Cyan/Magenta/
Green) without affecting other colors. You may not see tints change in a normal
picture even after adjustment.
5
• Picture Options: customizes the picture options.
–
–
–
–
–
Noise Reduction: Removes irregularly generated tiny dots for a clear picture.
MPEG Noise Reduction: Reduces the noise produced while creating digital video signals.
Black Level: Adjusts the black level of the picture to correct the brightness and contrast of the picture.
Real Cinema: Optimizes the video image for a cinematic look.
TruMotion: Reduces image shaking and image sticking that can occur with moving images.
• Reset: resets the picture settings.
NOTE
• You can adjust advanced settings only in the User mode.
• Depending upon the input signal or the selected picture mode, the available options may differ.
To set the aspect ratio,
(Some features may not be supported in certain models.)
Advanced
Picture
Aspect Ratio
Changes the aspect ratio to view the image in its optimal size.
• 16:9: displays the image with a 16:9 aspect ratio.
• Just Scan: displays the image in the original size without cutting off the edges.
Original is available in HDMI (720p or higher) mode. (On 58:9 models, this option can be selected
regardless of the input signal.)
• Set By Program: automatically changes the aspect ratio to 4:3 or 16:9 depending on the input video signal.
• 4:3: displays the image with a 4:3 aspect ratio.
• Zoom: expands the image to fit to the width of the screen. The top and bottom of the image may be
cropped.
• Cinema Zoom: enlarges the image to have a cinemascope ratio of 2.35:1 without distortion.
• 58:9: Displays the screen with a 58:9 aspect ratio.
CAUTION
• If a fixed image is displayed on the screen for a long period of time, it will be imprinted and become a
permanent disfigurement on the screen. This image burn or burn-in is not covered by the warranty.
• If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the
screen.
• The options may differ depending on the model.
• Depending on the input signal, the available aspect ratio may differ.
• You can select only 4:3 and 16:9 aspect ratios in HDMI-PC/ DVI-D/ DISPLAYPORT-PC/ OPS-PC/ RGB input
mode. (This does not apply to 58:9 models.)
• When you adjust Zoom or Cinema Zoom, the screen may flicker for some input signals.
6
To use the Energy Saving function
Advanced Picture
Energy Saving
Reduces power consumption by adjusting peak screen brightness.
• Auto: adjusts the brightness of the monitor according to ambient light. (This feature is available only with
certain models.)
• Off: disables the Energy Saving mode.
• Minimum/Medium/Maximum: uses the Energy Saving according to the Energy Saving level specified for
your monitor.
• Screen Off: turns off the screen. You will only hear audio. You can turn on the screen again by pressing any
button on the remote control except the power button.
To use the Smart Energy Saving function
Advanced
Picture
Smart Energy Saving
According to picture brightness, the brightness of the monitor will be adjusted automatically to save energy.
• Off: disables the Smart Energy Saving function.
• On: enables the Smart Energy Saving function.
To use the SCREEN(RGB-PC) function
(Only applies to certain models.)
Advanced
Picture
SCREEN(RGB-PC)
Customizes the PC display options in RGB mode.
• Set Automatically: Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration is in
progress.
• Resolution: Selects a proper resolution.
• Position/Size/Phase: Adjusts the options when the picture is not clear, especially when characters are
shaky, after the auto configuration.
• Reset: Restores the options to the default setting.
7
To run a Picture Test
(Only applies to certain models.)
Advanced
Picture
Picture Test
Run a Picture Test to check that picture signals are outputted normally, then solve any problems by selecting
the relevant option on the screen. If there are no problems with the Test Picture, check connected external
devices.
How to Use HDMI ULTRA HD Deep Colour
[For Ultra HD models only]
Advanced
Picture
HDMI ULTRA HD Deep Colour
If you connect an HDMI device to one of the Deep Colour adjustable ports, you can select Deep Colour On (6G)
or Off (3G) in the HDMI ULTRA HD Deep Colour settings menu.
If a compatibility issue occurs with a graphics card when the Deep Colour option is set to On at 3840 x 2160 @
60 Hz, set the Deep Colour option to Off.
• HDMI specifications may vary depending on the input port. Check the specifications of each device before
connecting.
• HDMI input port 1,2 are best suited for 4K at 60 Hz (4:4:4, 4:2:2) to enjoy high definition video. However,
video or audio may not be supported depending on the specifications of the external devices. In that case,
please connect to another HDMI port.
8
Sound Settings
• Only applies to certain models.
To select a Sound Mode
Advanced
Sound
Sound Mode
The best sound quality will be selected automatically depending on the video type currently being watched.
• Standard: this sound mode works well for content of all types.
• Cinema: optimizes sound for watching movies.
• News: optimizes sound for watching news.
• Sports: optimizes sound for watching sports.
• Music: optimizes sound for listening to music.
• Game: optimizes sound for playing videogames.
To use the Sound Effects function
Advanced
Sound
Sound Effects
• Clear Voice ll: enjoy clearer sound with the three-level adjustment.
• Equalizer: manually adjust sound by using the equalizer.
• Balance: adjust the output volume for the left speaker and the right speaker.
• Reset: reset the sound settings.
To select a Volume Increase Rate,
Advanced
Sound
Volume Increase Amount
you can set the volume range by selecting any of Low/ Medium/ High.
To sync audio with video
Advanced
Sound
AV Sync Adjustment
• Speaker: adjusts the sync between video and audio coming from external speakers, such as those
connected to the digital audio output port, LG audio equipment, or headphones. From the default
value, the closer the value is to -, the faster the sound output becomes, and the closer the value is
to +, the slower the sound output becomes.
• Bypass: audio coming from external devices without delay. Audio may be outputted earlier than video due
to the processing time for video that is inputted into the monitor.
To Run a sound test
Advanced
Sound
Sound Test
Run a sound test to check that sound signals are outputted normally, then solve any problems by selecting the
relevant option on the screen. If there are no problems with the Sound Test, check connected external devices.
9
Network Settings
To Set a Signage Monitor Name
Advanced
Network
Signage Name
You can set a name for Signage Monitor that will be used on the network by using the on-screen keyboard.
To Set Your Wired Network
Advanced
Network
Wired Connection (Ethernet)
• Connecting to a wired network: Connect your monitor to a local area network (LAN) via the LAN port,
and configure the network settings. Only wired network connections
are supported. After making a physical connection, a small number of
networks may require the display network settings to be adjusted. For
most networks, the display will automatically make a connection without
any adjustments. For detailed information, contact your Internet provider
or consult your router manual.
Setting a Wireless Network
Advanced
Network
Wi-Fi Connection
If you have set the monitor up for a wireless network, you can check and connect to the available wireless
Internet networks.
• Add a Hidden Wireless Network: If you input the name of network directly, you can add a wireless network.
• Connect via PBC: Connects easily when the button of a wireless AP supporting PBC is pressed.
• Connect via PIN: Connects easily when the PIN of the wireless AP that you wish to connect to is entered in to
the AP configuration webpage.
• Advanced Settings: If you input the information of network directly, you can enter a wireless network.
If there is no wireless network available, click Advanced Settings. You can add a
network.
Setting up a SoftAP
Advanced
Network
SoftAP
If you set up a SoftAP, you can connect many devices via a Wi-Fi connection without a wireless router and use
wireless Internet.
• To use SIGNAGE, you must have an Internet connection.
• You cannot use the SoftAP feature and the Screen Share feature at the same time.
• On models that support Wi-Fi dongles, the SoftAP menu is enabled only when a Wi-Fi dongle is connected
to the product.
• SoftAP connection information
–
–
–
SSID: A unique identifier necessary to make a wireless Internet connection
Security key: The security key you enter to connect to the desired wireless network
Number of connected devices: Shows the number of devices currently connected to your Signage device via a
Wi-Fi connection. Up to 10 devices are supported.
10
Tips for Network Setting
• Use a standard LAN cable (Cat5 or higher with a RJ45 connector) with this display.
• Many network connection problems during set-up can often be fixed by re-setting the router or modem.
After connecting the display to the home network, quickly power off and/or disconnect the power cable of
the home network router or cable modem, then power on and/or connect the power cable again.
• Depending on the Internet Service Provider (ISP), the number of devices that can receive Internet service
may be limited by the applicable terms of service. For details, contact your ISP.
• LG is not responsible for any malfunction of the display and/or the Internet connection feature due
to communication errors/malfunctions associated with your Internet connection, or other connected
equipment.
• LG is not responsible for problems with your Internet connection.
• You may experience undesired results if the network connection speed does not meet the requirements of
the content being accessed.
• Some Internet connection operations may not be possible due to certain restrictions set by the Internet
Service Provider (ISP) supplying your Internet connection.
• Any fees charged by an ISP including, without limitation, connection charges are your responsibility.
NOTE
• If you want to access the Internet directly on your display, the Internet connection should always be on.
• If you cannot access the Internet, check the network conditions from a PC on your network.
• When you use Network Setting, check the LAN cable or check if DHCP in the router is turned on.
• If you do not complete the network settings, the network may not function correctly.
CAUTION
• Do not connect a modular telephone cable to the LAN port.
• Since there are various connection methods, please follow the specifications of your telecommunication
carrier or Internet Service Provider.
• Network Setting menu will not be available until the display is connected to a physical network.
Tips for Wireless Network Setting
• Wireless networks can be subject to interference from other devices operating at a frequency of 2.4 GHz
(wireless phones, Bluetooth devices or microwave ovens). There may also be interference from devices with
a frequency of 5 GHz, same as other Wi-Fi devices.
• The surrounding wireless environment can cause the wireless network service to run slowly.
• If you do not turn off the entire local home network, network traffic may occur on some devices.
• For an AP connection, an access point device that supports wireless connection is required and the wireless
connection feature must be enabled on the device. Contact your service provider regarding availability of
wireless connection on your access point.
• Check the SSID and security settings of the AP for AP connection. Refer to the appropriate documentation
for SSID and security settings of the AP.
• Invalid settings on network devices (wired/wireless line sharer, hub) can cause the monitor to run slowly or
not operate properly. Install the devices correctly according to the appropriate manual and set the network.
• Connection method may differ according to the AP manufacturer.
11
General Settings
To configure the language
Advanced
General
Menu Language
Select one of the languages on the menu displayed on the screen.
• Menu Language: sets a language for Signage.
Setting up the keyboard language
Advanced
General
Keyboard Languages
Select the language you wish to show on the keyboard.
• Keyboard Languages: Sets the keyboard language.
To set the time/date
Advanced
General
Time & Date
You can check or change the time.
• Set Automatically : You can set Time and Date.
• Daylight Saving Time: You can set Start Time and End Time for Daylight Saving Time. The DST start/end
settings work only when you set them more than one day apart from each other.
• Time zone: You can change the settings for Continent, Country/Territory, and City.
To turn your monitor on or off automatically
Advanced
General
Timers
You can set the On/Off Timer for your monitor.
• On Timer: you can set the time when your monitor turns on.
• Off Timer: you can set the time when your monitor turns off.
• No Signal Power Off (15Min): When there is no input source, the monitor will automatically turn off after
15 minutes. If you don’t want it to turn off automatically, set No Signal Power
Off to Off.
• Auto Power Off: When there is no key input, the monitor will automatically turn off.
NOTE
• On Time/Off Time can be saved for up to seven schedules; the monitor is turned on or off at the preset time
in the schedule list. If multiple preset times are stored in the schedule list, this function works at the nearest
time from the current time.
• Once the on or off time is set, these functions operate daily at the preset time.
• The scheduled power-off function works properly only when the device time is set correctly.
• When the scheduled power-on and power-off times are the same, the power-off time has priority over the
power-on time if the set is turned on, and vice versa if the set is turned off.
12
To reset your monitor settings
Advanced
General
Reset to Initial Settings
Resets all monitor settings.
13
ENTERTAINMENT
Using My Media
Connecting USB/SD Storage Devices
Connect a USB storage device such as a USB flash memory, SD storage devices or an external hard drive to the
display and use multimedia features.
CAUTION
• Do not turn off the monitor or remove a USB storage device when the My Media screen is activated. This
could result in loss of files or damage to the USB storage device.
• Back up files you have saved on a USB storage device frequently, as loss or damage to the files may be not
covered by the warranty.
14
Tips for using USB/SD storage devices
• Only a USB storage device can be recognized.
• A USB device does not work effectively when it is connected via a USB hub.
• A USB storage device using an automatic recognition program may not be recognized.
• A USB storage device using its own driver may not be recognized.
• The recognition speed of a USB storage device may depend on each device.
• Please do not turn off the display or unplug the USB storage device when the connected device is working. If
the USB storage device is suddenly disconnected, the stored files or the device itself may be damaged.
• Please do not connect a USB storage device which was modified to work on a PC. The device may cause
the monitor to malfunction or the content fail to be played. Use only a USB storage device which contains
normal music, image or video files.
• A USB storage device formatted as a utility program not supported by Windows may not be recognized.
• A USB storage device (over 0.5 A) which requires an external power supply must be connected to a power
supply separately. If it is not, the device may not be recognized.
• Please connect the USB storage device using the cable provided by the device manufacturer.
• Some USB storage devices may not be supported or operate smoothly.
• File alignment method of USB storage devices is similar to that of Window XP and filenames can recognize
up to 100 English characters.
• Back up important files regularly as data stored on a USB storage device may be damaged. We will not be
responsible for any data loss.
• If the USB HDD does not have an external power source, the USB device may not be detected. To ensure the
device is detected, connect the external power source.
- Please use a power adapter for an external power source. We do not provide a USB cable for an external
power source.
• If your USB storage device has multiple partitions, or if you use a USB multi-card reader, you can use up to
four partitions or USB storage devices.
• If a USB storage device is connected to a USB multi-card reader, its volume data may not be detected.
• If the USB storage device does not work properly, disconnect and reconnect it.
• Detection speed differs from device to device.
• If the USB storage device is connected in Standby Mode, the specific hard disk will automatically be loaded
when the display is turned on.
• The recommended capacity is 1 TB or less for a USB external hard drive and 32 GB or less for USB memory
stick.
• Any device with more than the recommended capacity may not work properly.
• If a USB external hard drive with an “Energy Saving”function does not work, try turning the hard drive off
and on again.
• USB storage devices below USB 2.0 are also supported but may not function correctly in the Videos.
• A maximum of 999 sub-folders or files can be recognized under one folder.
• The SDHC type for SD cards is supported. To use an SDXC card, format it to the NTFS file system first.
• The exFAT file system is not supported for SD cards and USB storage devices.
15
Files Supported by My Media
Supported External Subtitle Format
(Subtitles are not supported in certain models.)
• *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX), *.dcs (DLP
Cinema)
To use Select Play
Photos/ Videos/ Music/ All
• Play Selection: plays back selected content.
To set FILTER
Photos/ Videos/ Music/ All
• FILTER: import contents from the selected device.
To set Scheduled Playing
Photos/ Videos/ Music/ All
• Scheduled Playing: You can play the selected content at the scheduled time.
16
Supported Internal Subtitle Format
• FULL HD Video
1920 x 1080: XSUB (Supports internal subtitles generated from DivX6)
• [For Ultra HD models only] Ultra HD image: Does not support internal subtitles.
Supported Video Codec
Extension
Codec
.asf
.wmv
Videos
Audio
Videos
Audio
Videos
VC-1 Simple and Main Profiles
WMA Standard, WMA 10 Professional
.divx
.avi
DivX3.11, DivX4, DivX5, DivX6, XViD, H.264/AVC, Motion Jpeg, MPEG-4 Part2
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM, DTS
H.264/AVC, MPEG-4 Part2
.mp4
.m4v
.mov
Audio
AAC, MPEG-1 Layer III (MP3)
.3gp
.3g2
Videos
Audio
Videos
Audio
Videos
H.264/AVC, MPEG-4 Part2
AAC, AMR-NB, AMR-WB
H.264/AVC
.mkv
HE-AAC, Dolby Digital
H.264/AVC, MPEG-2
.ts
.trp
.tp
.mts
.m2ts
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, Dolby Digital Plus, AAC, PCM
.mpg
.mpeg
Videos
Audio
MPEG-1, MPEG-2
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), AAC
.vob
Videos
Audio
MPEG-1, MPEG-2
Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM
17
Supported Audio File
File Format
.MP3
Item
Information
Bit rate
32 Kbps to 320 Kbps
16 KHz to 48 KHz
MPEG1, MPEG2, Layer2, Layer3
mono, stereo
Sample freq.
Support
channels
Bit rate
.ogg
64 Kbps to 500 Kbps
8 kHz to 48 kHz
Vorbis
Sample freq.
Support
channels
Bit rate
mono, stereo
.wma
~1.5 Mbps
Sample freq.
Support
8 kHz to 192 kHz
WMA
channels
up to 6 ch
Supported Photo File
File Format
Format
Item
jpeg, jpg, jpe
JPEG
y
y
Minimum : 64 x 64
Maximum
- Normal Type: 15360 (W) x 8640 (H)
- Progressive Type: 1920 (W) x 1440 (H)
.png
PNG
BMP
y
y
Minimum : 64 x 64
Maximum: 5760 (W) x 5760 (H)
.bmp
y
y
Minimum : 64 x 64
Maximum: 1920 (W) x 1080 (H)
Supported Files and Formats for Content (with SuperSign Manager)
File extension
*.cts, *.sce
Video file
extension
*.mpg, *.mpeg, *.dat, *.ts, *.trp, *.tp, *.mp4, *.mkv, *.avi, *. avi(motion JPEG), *. mp4(motion JPEG),
*.mkv(motion JPEG)
Video format
MPEG1, MPEG2, MPEG4,H.264, DivX 3.11, DivX 4, DivX 5, DivX 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid
1.03,Xvid 1.10-beta1/2, JPEG
Audio format
Web page
MP3, Dolby Digital, LPCM, AAC, HE-AAC, AMR-NB, AMR-WB
Only web pages that support iframe can be displayed.
18
Viewing Videos
Play video files on display. All of the saved video files are shown in your display.
To play video files on display
Videos
Tips for Playing Video Files
• Some user-created subtitles may not work properly.
• Some special characters in subtitles are not rendered.
• HTML tags are not supported in subtitles.
• Subtitles in languages other than the supported languages are not available.
• The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio
language is changed.
• A damaged video file may not play correctly, or some player functions may not be usable.
• Video files produced with some encoders may not be played correctly.
• If the video and audio structure of a recorded file is not interleaved, either video or audio is outputted.
• Video files other than the specified types and formats may not play correctly.
• Maximum bit rate of playable video file is 20 Mbps. (Motion JPEG: 10 Mbps only)
• We cannot guarantee smooth playback of files encoded level 4.1 or higher in H.264 / AVC.
• Video files more than 30 GB in file size are not supported.
• A DivX video file and its subtitle file must be located in the same folder.
• A video file and its subtitle file must be located in the same folder. A video file name and its subtitle file
name must be identical in order to display the subtitle properly.
• Playing a video via a USB connection that does not support high-speed connection may not function
correctly.
• Subtitles on a Network Attached Storage (NAS) device may not be supported depending on the
manufacturer and model.
• Streaming of files encoded by GMC (Global Motion Compensation) or Qpel (Quarterpel Motion Estimation)
is not supported.
• [For Ultra HD models only] Ultra HD image: 3840 X 2160
Some HEVC-encoded Ultra HD videos other than the content officially provided by LG Electronics may not
be played. Some codecs can be used after upgrading software.
Extension
Codec
.mkv
.mp4
.ts
Video
Audio
H.264/AVC, HEVC
Dolby Digital, Dolby Digital Plus, AAC, HE-AAC
• Playable file sizes may vary depending on the encoding condition.
• The AAC Main profile is not supported.
• Video files created by some encoders may not play.
19
NOTE
• Option values changed in Videos do not affect the Photos and Music. and in turn are not affected by option
values changed in Photos or Music.
• Option values changed in Photos and Music do affect each other.
• When restarting a video file after stopping it, you can play from the point at which it was stopped.
• Only 10,000 sync blocks can be supported within the subtitle file.
• When playing a video, you can adjust the picture size by pressing the ARC button.
• Korean subtitle is supported only when the OSD menu is in Korean.
• The code page options may be disabled depending on the language of the subtitle files.
• Select the appropriate code page for the subtitle files.
20
Viewing Photos
Settings
The displays on the screen may differ from the
model.
You must register your product to play a DRM-
protected DivX video.
Viewing image files
Photos
In order to register/deregister purchased or
rented DivX® VOD contents
Videos
DivX® VOD
In order to play purchased or rented DivX® VOD
contents, you should register your device with 10
digit DivX registration code from your device at
Listening to Music
Viewing music files
Music
• Registration: view the registration code of your
display.
• Deregistration: cancel the registration.
NOTE
NOTE
• Files with unsupported extensions are not
displayed.
• While you are checking the registration code,
some buttons may not work.
• If a file is invalid, a broken image and the
message "unrecognizable file" are displayed.
• Damaged music files are displayed as 00:00 and
will not be played.
• If you use the DivX registration code of another
device, you cannot play rented or purchased
DivX files. Use only the DivX registration code
assigned to your product.
• A music file downloaded from a paid service
with copyright protection will not play, and
incorrect information may be displayed during
playback.
• Video or audio files that are not converted using
the standard DivX codec may be corrupted or
not play.
• The DivX® VOD code allows you to activate up to
6 devices under one account.
• You can use
,
,
,
,
buttons on
the remote control also in this mode.
• After deregistration, you must register your
device again to see DivX® VOD contents.
• You can use the
track and the
track.
button to select the next
button to select the previous
• If you press the
button within 5 seconds
after playing the song, you will return to the
previous song; if you press the same button
after 5 seconds, you will return to the start of
the song.
21
Moving, Copying, or Deleting a
File
SuperSign Contents
Plays stored files using the Export option in
SuperSign Editor.
You can move, copy, or delete files.
To move, copy, or delete files
Devices
To play back the stored files using the Export
option
• You can move or copy files or folders from
internal to external memory.
• You can move or copy files or folders from
external to internal memory.
• You can delete files or folders from internal or
external memory.
Only contents distributed by SuperSign Manager
are displayed and selectable. If there is a USB/SD
storage device connected, the image on the USB/
SD device is outputted additionally.
NOTE
NOTE
• If there is an AutoPlay folder in the USB storage
device and its files are in supported formats,
they will be played back automatically when the
USB storage device is connected to the monitor.
• Those files bigger than internal remaining
memory aren`t allowed to be copied or moved
to the internal memory.
Information
To check the basic information of Signage
Monitor
You can see the basic information on Signage
Monitor.
You can also switch to Smart Energy Saving
Mode or configure Fail Over settings. (You can
switch to Smart Energy Saving Mode only when
Energy Saving Mode is set to Off.)
22
Local Contents Scheduler
• Only applies to certain models.
To view detailed information about a
scheduled playing
You can view or delete any scheduled playing
created in MY MEDIA.
Select Scheduled Playing
To access Local Contents Scheduler
• From list of the scheduled playing, select a
specific scheduled playing and view its detailed
information.
Go to Local Contents Scheduler to check the list
of the scheduled playing created in MY MEDIA.
To play scheduled playing instantly
NOTE
Select Scheduled Playing
Play Button
• By default, Local Contents Scheduler lists the
scheduled playing created by the currently
connected devices.
• In the detailed information page of the
scheduled playing, click the Play button above
the thumbnail to play the scheduled playing
instantly.
To add new a scheduled playing
NOTE
• NEW SCHEDULED PLAYING: In the pop-up
window, click the GO TO MY MEDIA button and
enter MY MEDIA to create new a scheduled
playing.
• To play a scheduled playing instantly rather than
at the scheduled time, the scheduled playing
must be in a playable status. In other words, the
device used for creating the scheduled playing
must be connected, and all the content included
in the scheduled playing must be valid.
To configure FILTER
Editing a Scheduled Playing
Select the desired scheduled
Playing
• FILTER: You can view the list by sorting it based
on the type of device used for creating
the scheduled playing.
• EDIT: Click the EDIT button at the top left of the
Details page of your desired scheduled
Playing, and then you will be directed to
My Media where you can edit information
about the scheduled Playing including its
content and other details.
To delete a scheduled playing
• DELETE: You can select a scheduled playing and
delete it.
NOTE
• You can edit the scheduled Playing only when
the device used for creating the scheduled
playback is connected.
23
Screen Share
• Only applies to certain models.
Allows the screen of a user's device such as a mobile or PC Windows to be shared with a display using a wireless
connection such as WiDi or Miracast.
To use Screen Share
When the Screen Share app is running, the wireless connection such as WiDi or Miracast is automatically set to
ON and the display is automatically changed to the connection ready mode. In this state, you can use Screen
Share by turning on the wireless connection on the device and selecting the display to establish a connection
between the device and the display.
NOTE
Configuring WiDi (Wireless Display)
WiDi, which is short for Wireless Display, is a system that wirelessly transmits video and sound files from a
laptop that supports Intel WiDi to the display.
This is available only in certain input modes (Composite/Component/RGB/HDMI/DP/OPS/DVI-D).
Other than these modes, LG Signage cannot be detected by your PC.
1
Connect your laptop to an AP. (This feature can be used without an AP, but it is recommended that you
connect to it for optimal performance.)
Run the Intel WiDi ( ) program on your laptop.
2
Any nearby LG Signages supporting WiDi are detected. In the list of detected displays, select a Signage to
connect to and then, click Connect.
Enter the 8-digit PIN number (a) displayed on the Signage in the input field of your laptop (b) and click
Continue.
[Intel Notebook] Connection Request
Enter the PIN below.
********
PIN********
b
a
Time remaining: 92 seconds
Cancel
Signage screen
Laptop screen
3
The laptop screen appears in the Signage screen within 10 seconds. The wireless environment may affect
the screen from displaying.
If the connection is poor, the Intel WiDi connection may be lost.
• LG Signage does not need to be registered.
• This works normally with WiDi 3.5 or later versions.
24
To select connection mode
Listen Mode
You can select between On and Off.
If it is set to On, even when the app is not running,
you can turn on a wireless connection feature such
as WiDi or Miracast and select a display to connect
the device and display. Then, Screen Share will be
available for use.
NOTE
• If the Screen Share app has been deleted from
the HOME screen, Screen Share cannot be used
even if Listen Mode is set to On.
To set the transfer speed
Transfer Speed
Transfer speed can be set to Fast or Normal. When
Screen Share is running, this option adjusts the
time difference of the image output between
the device and the display. Adjusting the transfer
speed can repair any interruptions in displays
when mirroring is used.
25
SuperSign EZ
• Only applies to certain models.
SuperSign EZ enables you to produce and play Signage content. This feature enables you to edit Signage
content based on templates and set its playback time. In addition, this feature also enables you to access
SuperSign EZ from your mobile device or PC and create/edit content.
CAUTION
• A maximum of 5,000 images stored on a USB drive/SD card can be displayed from your PC or mobile device.
Images more than 5,000 cannot be displayed from your PC or mobile device. In addition, we recommend
you store no more than 1,000 images for use on your USB drive or SD card. If you use more than 1,000
images, the images may not be displayed smoothly depending on your environment.
• Supported devices (Some features may not be available depending on the type or version of your device or
browser.)
–
–
–
Android 4.4 or later (Chromium v.38.0)
iOS 8 or later (Safari v.600.1.4 or later)
PC: Chromium v.38.0
• Content playback time: The minimum playback time is set to 5 seconds. If you set the content playback time
to less than 5 seconds, it is automatically reset to 5 seconds.
• If you play UHD videos on a UHD model, videos with a high bitrate may not play properly due to the
limitations of the processing speed.
Features
• Add/edit (images and texts)/delete Signage content/change playback times and names.
• Add images and videos on mobile devices.
• You can use images added from USB/SD storage devices and internal memory.
How to Use
• Monitors: Run the app in the Launcher bar and add/edit/delete the desired content.
• Mobile devices: Run the app in the Launcher bar and get access using the QR code or URL provided.
NOTE
• If you use a mobile device, you need to go through an authorization process using a PIN code. The default
PIN code is '0000'.
• When using a PC, use the full screen (F11) feature in 1920 x 1080 (Full HD) resolution to view the same
screen as the monitor.
Photo Supported File
File Format
Format
JPEG
Item
jpeg, jpg, jpe
y
y
Minimum : 64 x 64
Maximum
- Normal Type: 15360 (W) x 8640 (H)
- Progressive Type: 1920 (W) x 1440 (H)
.png
PNG
y
y
Minimum : 64 x 64
Maximum: 5760 (W) x 5760 (H)
26
Supported Video Codec
Extension
Codec
.asf
.wmv
Videos
Audio
Videos
Audio
Videos
VC-1 Simple and Main Profiles
WMA Standard, WMA 10 Professional
.divx
.avi
DivX3.11, DivX4, DivX5, DivX6, XViD, H.264/AVC, Motion Jpeg, MPEG-4 Part2
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM, DTS
H.264/AVC, MPEG-4 Part2
.mp4
.m4v
.mov
Audio
AAC, MPEG-1 Layer III (MP3)
.3gp
.3g2
Videos
Audio
Videos
Audio
Videos
H.264/AVC, MPEG-4 Part2
AAC, AMR-NB, AMR-WB
H.264/AVC
.mkv
HE-AAC, Dolby Digital
H.264/AVC, MPEG-2
.ts
.trp
.tp
.mts
.m2ts
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, Dolby Digital Plus, AAC, PCM
.mpg
.mpeg
Videos
Audio
MPEG-1, MPEG-2
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), AAC
.vob
Videos
Audio
MPEG-1, MPEG-2
Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM
Tips for Playing Video Files
• A damaged movie file may not play correctly, or some player features may not be usable.
• Movie files produced with some encoders may not be played correctly.
• Movie files other than the specified types and formats may not work properly.
• Max bit rate of playable movie file is 20 Mbps. (For Motion JPEG: 10 Mbps only)
• We do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264 / AVC.
• Video files larger than 50 MB may not upload properly from mobile devices. We recommend that you play
such files via USB/SD storage devices.
• [For Ultra HD models only] Ultra HD image: 3840 X 2160
Some HEVC-encoded Ultra HD videos other than the content officially provided by LG Electronics may not
be played.
Extension
Codec
.mkv
.mp4
.ts
Video
Audio
H.264/AVC, HEVC
Dolby Digital, Dolby Digital Plus, AAC, HE-AAC
• Some codecs can be used after upgrading software.
27
Multi-Screen
Changing Screen Input
Press the button on the top right of each split
Only applies to certain models.
y
This feature allows you to view multiple external
inputs and videos on a single screen.
screen to select the desired input.
Accessing Multi-Screen
NOTE
Inputs which have already been selected for
other split screens cannot be selected again.
To select them, press the RESET button to
reset the inputs for all screens first.
y
Enter Multi-screen to select the screen layout.
NOTE
Playing Videos on Split Screens
When entering Multi-screen, the screen
may flicker and the picture may appear
abnormal on certain devices while the
optimal resolution is selected automatically.
If this happens, please restart the monitor.
y
Press the
button on the upper right of each
split screen, select Video File, and then select
a storage device to view the list of videos in the
selected device. Next, select your desired video
from the list to play it.
Selecting Screen Layout
When you enter Multi-screen without having
set any screen layout, the screen layout selection
menu appears.
If the screen layout menu does not appear, you can
press the up arrow key on the remote control to go
to the screen layout menu bar and select it to show
the screen layout menu.
Closing Screen Layout Menu
From the screen layout menu, press the up arrow
key on the remote control to go to the screen
layout menu bar and select it or press the BACK
key to close the screen layout menu.
28
Tips for playing Multi-Screen files
Resolutions supported on external input split
screens
The number of split screens available may
differ by model.
Some tips on playing video files are
included.
y
y
The following resolutions are supported when
external input is selected.
Mode Resolution
Frame
Rate
Subtitles are not supported.
Audio is only supported for the main screen.
The following video types are supported in
split mode.
y
y
y
PIP
Main
2160p
30
1080p, 720p
1080p, 720p
50, 60
Codec
MPEG-2, H.264, HEVC, VP9
Progressive
Sub
Scan Type
Frame rate
Resolution
PBP
1080p, 720p
24, 25, 30
960 x 600, 1280 x 600, 1920
x 300
60
PIP mode supports 3840 x 2160
(main screen only), 1920 x 1080
and 1280 x 720.
(Only applies to the models
that support the resolutions)
PBP mode supports 1920 x 1080
and 1280 x 720.
The resolutions supported on the split
screens may differ depending on the
resolutions supported by the model being
used.
y
Certain videos may not play normally
depending on codec, resolution, frame rate
and scan type.
y
y
NOTE
Certain models may not support the
following codec combinations when playing
3840 x 2160 resolution videos on the main
screen in PIP mode.
Main (3840 x 2160)
Sub
HEVC
H.264
VP9
HEVC
HEVC
VP9
When the 4-section screen has been
selected in PBP mode, up to two H.264 and
MPEG2 codecs can be used on condition
that the HEVC codec is in use on one screen
only.
y
29
PICTURE ID Settings
NOTE
• Only applies to certain models.
• If PICTURE ID is set to 2, only the upper
right monitor, which has a Set ID of 2, can be
controlled by IR signals.
• If you press the green OFF button for PICTURE
ID, the PICTURE IDs for all monitors are turned
off. If you then press any button on the remote
control, all monitors can be controlled by IR
signals regardless of Set ID.
PICTURE ID is used to change the settings of a
specific set (display) using a single IR receiver for
multi-vision. Communication is possible between
a monitor with an IR receiver and other monitors
using RS-232C cables. Each monitor is identified
by a Set ID. If you assign the PICTURE ID using
the remote control, only displays with matching
PICTURE ID and Set ID can be controlled remotely.
1
Assign the Set ID to the installed monitors as
shown below.
IR & Light Sensor
RS-232C cables
PICTURE ID
2
3
Press the red ON button on the remote control
to assign the PICTURE ID.
Assign the Set ID to the selection of your
choice.
• A set with a different Set ID from the PICTURE
ID cannot be controlled by IR signals.
30
IR CODES
All models do not support the HDMI/USB function.
Some key codes may not be supported depending on the model.
Code (Hex)
Function
Remarks
Remote control button
08
POWER
C4
C5
95
0B
MONITOR ON
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
MONITOR OFF
Energy Saving
INPUT
10
11
Number Key 0
Number Key 1
12
13
14
15
Number Key 2
Number Key 3
Number Key 4
Number Key 5
16
17
Number Key 6
Number Key 7
18
19
02
Number Key 8
Number Key 9
Volume
Volume
03
E0
E1
DC
32
2F
7E
BRIGHTNESS (Page Up)
BRIGHTNESS (Page Down)
3D
1/a/A
CLEAR
79
ARC(MARK) (Aspect Ratio)
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
4D
09
43
99
40
41
06
07
44
28
PSM (Picture Mode)
MUTE
SETTINGS (Menu)
Auto Config.
Up
Down
Right
Left
OK
BACK
31
Code (Hex)
Function
Remarks
Remote control button
7B
5B
72
71
63
61
B1
B0
BA
8F
8E
5F
3F
7C
TILE
EXIT
Remote control button
Remote control button
Remote control button
Remote control Button
Remote control button
PICTURE ID ON (RED)
PICTURE ID OFF (GREEN)
YELLOW
BLUE
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
Remote control button
W.BAL
S.MENU
HOME
* Some key codes are not supported depending on the model.
32
TO CONTROL MULTIPLE PRODUCTS
• Only applies to certain models.
Use this method to connect several products to a single PC. You can control several products at a time by
connecting them to a single PC.
In the Option menu, the Set ID must be between 1 and 1000 without being duplicated.
Connecting the Cable
• The image may be different according to the model.
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the product on or
off, select an input source or adjust the OSD menu from your PC.
PC
Monitor 4
Monitor 3
Monitor 2
Monitor 1
RS-232C
OUT
RS-232C
IN
RS-232C
OUT
RS-232C
IN
RS-232C
OUT
RS-232C
IN
RS-232C
OUT
RS-232C
IN
RS-232C Cable
(not included)
4P Cable
(not included)
RS-232C Gender
Monitor 1
Monitor 2
Monitor 3
Monitor 4
PC
RS-232C Cable (not included)
33
Communication Parameter
Baud Rate: 9600 BPS
NOTE
• When using three-wire connections (non-
standard), an IR daisy chain cannot be used.
• Be sure to only use the provided gender to
connect properly.
• When monitors connected via Daisy Chain (that
controls multiple monitors) are turned off and
on successively, some monitors may not turn
on. In this case, you can turn those monitors on
by pressing the MONITOR ON button, not the
POWER button.
Data Length: 8 bit
Parity Bit: None
Stop Bit: 1 bit
Flow Control: None
Communication Code: ASCII code
(POWER)
MONITOR ON
34
Command Reference List
COMMAND
DATA
(Hexadecimal)
1
k
x
k
j
2
a
b
c
q
x
g
h
k
i
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Power
00 to 01
Select input
See Select Input
See Aspect Ratio
See Energy Saving
See Picture Mode
00 to 64
Aspect Ratio
Energy Saving
Picture Mode
d
k
k
k
k
k
x
k
d
k
k
f
Contrast
Brightness
00 to 64
Sharpness
00 to 32
Color
00 to 64
Tint
j
00 to 64
Color temperature
Balance
u
t
00 to 64
00 to 64
Sound Mode
y
e
f
See Sound Mode
00 to 01
Mute
Volume Control
Time 1 (year/month/day)
Time 2 (hour/minute/second)
Off time schedule
On Time Schedule
Off Timer (Repeat/Time)
On Timer (Repeat/Time)
On Timer Input
No Signal Power Off (15Min)
Auto Power Off (4 Hours)
Language
00 to 64
a
x
c
b
e
d
u
g
n
i
See Time 1
See Time 2
00 to 01
f
f
f
00 to 01
f
See Off Timer
See On Timer
Refer to On Timer Input.
00 to 01
f
f
f
m
f
00 to 01
See Language
00 to 02
Reset
f
k
n
c
l
Current Temperature
Key
d
m
d
f
FF
See Key
Time Elapsed
FF
Product Serial Number
Software Version
White Balance Red Gain
White Balance Green Gain
White Balance Blue Gain
White Balance Red Offset
White Balance Green Offset
White Balance Blue Offset
Backlight
y
z
FF
f
FF
j
m
n
o
x
y
z
00 to FE
j
00 to FE
j
00 to FE
s
s
s
m
k
00 to 7F
00 to 7F
00 to 7F
g
d
00 to 64
Screen off
00 to 01
35
COMMAND
DATA
(Hexadecimal)
1
d
d
d
d
f
2
d
z
i
40
41
42
43
44
45
46
47
48
49
50
51
Tile Mode
00 to FF
FF
Check Tile Mode
Tile ID
See Tile ID
00 to 01
00 to 07
00 to 01
00 to FA
00 to 02
Natural Mode
j
DPM Select
j
Remote Control/Local Key Lock
Power On Delay
Fail Over Select
Fail Over Input Select
IR Operation
k
f
m
h
i
m
m
t
j
See Fail Over Input Select
00 to 02
p
o
v
Local Key Operation
Check the status
t
00 to 02
s
See Check the status
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
Check Screen
Speakers
t
d
s
s
j
z
v
00 to 01
00 to 01
Daylight Saving Time
PM Mode
d
Refer to ‘Daylight Saving Time’
00 to 03
n, 0c
p
ISM Method
See ISM Method
Network Settings
Auto-adjustment
H Position
s
j
n, 80(81)(82) See Network Settings
u
q
01
f
00 to 64
00 to 64
00 to 64
00 to 02
00 to 01
00 to 01
00 to 02
00 to 01
00 to 01
00 to 01
00 to 01
00 to 01
00 to 01
00 to 02
00 to 01
00 to 01
00 to 01
00 to 01
V Position
f
r
H Size
f
s
Power On Status
Wake On LAN
Intelligent Auto
OSD Portrait Mode
Reset to Initial Settings
Time Sync
t
f
r
w
t
t
t
s
t
t
s
s
s
s
s
s
s
i
h
n
n, 16
g
Contents Sync
Pivot Mode
a
Studio Mode
n, 83
n, 84
n, 85
n, 0b
n, 87
n, 88
n, 89
LAN Daisy Chain
Content Rotation
DPM Wake up Control
Scan Inversion
Beacon
Aspect Ratio(Rotation)
36
COMMAND
DATA
(Hexadecimal)
1
2
77
78
79
80
81
82
Easy Brightness Control Mode
Easy Brightness Control Schedule
MultiScreen Mode & Input
Aspect Ratio(MultiScreen)
Screen Mute(MultiScreen)
Screen Off Always
s
m
00 to 01
s
x
x
x
s
s
c
See Easy Brightness Control Schedule
See MultiScreen Mode & Input
See Aspect Ratio(MultiScreen)
See Screen Mute(MultiScreen)
00 to 01
d
e
n, 0d
83
84
85
Screen Video Freeze
Wireless Wake On LAN
OSD Display
k
s
x
n, 90
l
00 to 01
00 to 01
00 to 01
k
* Note: Commands may not work when the external input is not used. Some commands may not be supported
depending on the model.
37
Transmission/Reception Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command1]: identifies between the factory setting and the user setting modes.
* [Command2]: controls monitor sets.
* [Set ID]: Used for selecting a set you want to control. A unique Set ID can be assigned to each set ranging
from 1 to 1000(01H~3E8H) under Settings in the OSD menu.
Selecting '00H' for Set ID allows the simultaneous control of all connected monitors.
(The maximum value may differ depending on the model.)
* [Data]: Transmits command data.
Data count may increase depending on the command.
* [Cr]: Carriage Return. Corresponds to '0x0D' in ASCII code.
* [ ]: White Space. Corresponds to '0x20' in ASCII code.
Acknowledgement
[Command2][ ][Set ID][ ][OK/NG][Data][x]
* The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At this
time, if the data is FF, it indicates the present status data. If the data is in data write mode, it returns the data of
the PC computer.
* If a command is sent with Set ID '00' (=0x00), the data is reflected to all monitor sets and each monitor set
does not send an acknowledgement (ACK).
* If the data value 'FF' is sent in control mode via RS-232C, the current setting value of a function can be
checked (only for some functions).
*Some commands are not supported depending on the model.
38
01. Power (Command: k a)
03. Aspect Ratio (Command: k c)
Adjusts the aspect ratio.
Transmission
Controls the power on/off of the set.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
[k][a][ ][Set ID][ ][Data][Cr]
Data
01: 4:3
02: 16:9
04: Zoom
06: Set by Program
09: Just Scan (720p or higher)
10 to 1F: Cinema Zoom 1 to 16
21: 58:9
30: Vertical Zoom
31: All-Direction Zoom
Data
00: Off
01: On
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
*The acknowledgement signal is returned properly only when
the monitor is fully powered on.
* There may be a delay between the transmission and
acknowledgement signals.
* Available data types differ depending on the input signal. For
more information, see the aspect ratio section of the owner’s
manual.
* The aspect ratio may differ depending on the model’s input
configuration.
02. Select Input (Command: x b)
Selects an input signal.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data
20: AV
[c][ ][Set ID][ ][OK/NG][Data][x]
40: COMPONENT
60: RGB
70: DVI-D (PC)
80: DVI-D (DTV)
90: HDMI1 (DTV)
A0: HDMI1 (PC)
91: HDMI2/OPS (DTV)
A1: HDMI2/OPS (PC)
92: OPS/HDMI3/DVI-D (DTV)
A2: OPS/HDMI3/DVI-D (PC)
95: OPS/DVI-D (DTV)
A5: OPS/DVI-D (PC)
98: OPS (DTV)
04. Energy Saving (Command: j q)
Sets the Energy Saving.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Minimum
02: Medium
03: Maximum
04: Automatic
05: Screen off
Acknowledgement
A8: OPS (PC)
C0: DISPLAYPORT (DTV)
D0: DISPLAYPORT (PC)
E0: SuperSign webOS Player
E1: Others
[q][ ][Set ID][ ][OK/NG][Data][x]
** This may not be supported depending on the model.
E2: Multi Screen
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
05. Picture Mode (Command: d x)
Selects a picture mode.
Transmission
* Some input signals may not be supported depending on the
model.
** If it is not distributed from SuperSign W, webOS Player
returns NG.
[d][x][ ][Set ID][ ][Data][Cr]
Data
00: Vivid
01: Standard
02: Cinema
03: Sports
04: Game
05: Expert 1
06: Expert 2
08: APS
09: Photos
10: Touch
11: Calibration
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
* Depending on the model, some picture modes may not be
supported.
39
06. Contrast (Command: k g)
Adjusts the screen contrast.
Transmission
10. Tint (Command: k j)
Adjusts the screen tint.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
[k][j][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Contrast 0 to 100
Acknowledgement
Data
00 to 64: Tint red 50 to green 50
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
[j][ ][Set ID][ ][OK/NG][Data][x]
07. Brightness (Command: k h)
Adjusts the screen brightness.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
11. Color Temperature (Command: x u)
Adjusts the screen color temperature.
Transmission
Data
00 to 64: Brightness 0 to 100
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
[x][u][ ][Set ID][ ][Data][Cr]
Data
00 to 64: warm 50 to cool 50
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
08. Sharpness (Command: k k)
Adjusts the screen sharpness.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data
00 to 32: Sharpness 0 to 50
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
12. Balance (Command: k t)
Adjusts the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data
00 to 64: left 50 to right 50
Acknowledgement
09. Color (Command: k i)
Adjusts the screen color.
Transmission
[t][ ][Set ID][ ][OK/NG][Data][x]
[k][i][ ][Set ID][ ][Data][Cr]
Data
00 to 64: Color 0 to 100
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
40
13. Sound mode (Command: d y)
Selects a sound mode.
Transmission
2. Setting the Auto time
Data1
00: Auto
01: Manual
* To view the set value of the Auto time, enter “fa [Set ID] 00 ff”.
Acknowledgement
[d][y][ ][Set ID][ ][Data][Cr]
Data
01: Standard
02: Music
03: Cinema
1. [a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
2. [a][ ][Set ID][ ][OK/NG][0][0][Data1][x]
04: Sports
05. Game
07: News
Acknowledgement
17. Time 2 (hour/minute/second) (Command: f x)
Adjusts the Time 2 (hour/minute/second) value.
Transmission
[y][ ][Set ID][ ][OK/NG][Data][x]
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
Data2
Data3
00 to 17: 00 to 23 hours
00 to 3B: 00 to 59 minutes
00 to 3B: 00 to 59 seconds
14. Mute (Command: k e)
Mutes/unmutes the sound.
Transmission
* Enter “fx [Set ID] ff”to view the Time 2 (hour/minute/second)
settings.
** This function is only available when Time 1 (year/month/
[k][e][ ][Set ID][ ][Data][Cr]
day) is set.
Acknowledgement
Data
00: Mute
01: Unmute
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
18. Off Time Schedule (Command: f c)
Enables/disables the Off Time Schedule.
Transmission
[f][c][ ][Set ID][ ][Data][Cr]
15. Volume Control (Command: k f)
Adjusts the playback volume.
Transmission
Data
00: Off
01: On
Acknowledgement
[k][f][ ][Set ID][ ][Data][Cr]
[c][ ][Set ID][ ][OK/NG][Data][x]
Data
00 to 64: Volume 0 to 100
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
19. On Time Schedule (Command: f b)
Enables/disables the On Time schedule.
Transmission
16. Time 1 (year/month/day) (Command: f a)
Sets the values of the Time 1 (year/month/day), or sets the Auto
[f][b][ ][Set ID][ ][Data][Cr]
time.
Data
00: Off
01: On
Transmission
1. [f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
2. [f][a][ ][Set ID][ ][0][0][ ][Data1][ ][Cr]
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
1. Setting the Time 1 (year/month/day)
Data1
Data2
Data3
04~1B: year 2014 to 2037
01 to 0C: January to December
01 to 1F: 1st to 31st
* Enter "fa [Set ID] ff" to view the Time 1 (year/month/day)
settings.
41
20. Off Timer (Repeat/Time) (Command: f e)
Configures Off Timer (Repeat/Time) settings.
Transmission
21. On timer (Repeat/Time) (Command: f d)
Configures On Timer (Repeat/Time) settings.
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
Data1
1. f1h to f7h (reading data)
F1: reads the 1st Off Timer data
F2: reads the 2nd Off Timer data
F3: reads the 3rd Off Timer data
F4: reads the 4th Off Timer data
F5: reads the 5th Off Timer data
F6: reads the 6th Off Timer data
F7: reads the 7th Off Timer data
2. e1h-e7h (delete one index), e0h (delete all indexes)
E0: erases all Off Timer settings
E1: erases the 1st Off Timer setting
E2: erases the 2nd Off Timer setting
E3: erases the 3rd Off Timer setting
E4: erases the 4th Off Timer setting
E5: erases the 5th Off Timer setting
E6: erases the 6th Off Timer setting
E7: erases the 7th Off Timer setting
3. 01h to 0Ch (sets the day of the week for the Off Timer)
01: Once
1. f1h to f7h (reading data)
F1: reads the 1st On Timer data
F2: reads the 2nd On Timer data
F3: reads the 3rd On Timer data
F4: reads the 4th On Timer data
F5: reads the 5th On Timer data
F6: reads the 6th On Timer data
F7: reads the 7th On Timer data
2. e1h-e7h (delete one index), e0h (delete all indexes)
E0: erases all On Timer settings
E1: erases the 1st On Timer setting
E2: erases the 2nd On Timer setting
E3: erases the 3rd On Timer setting
E4: erases the 4th On Timer setting
E5: erases the 5th On Timer setting
E6: erases the 6th On Timer setting
E7: erases the 7th On Timer setting
3. 01h to 0Ch (sets the day of the week for the On Timer)
01: Once
02. Daily
02. Daily
03: Mon - Fri
03: Mon - Fri
04: Mon - Sat
04: Mon - Sat
05: Sat - Sun
05: Sat - Sun
06. Every Sunday
06. Every Sunday
07. Every Monday
07. Every Monday
08. Every Tuesday
08. Every Tuesday
09. Every Wednesday
09. Every Wednesday
0A. Every Thursday
0A. Every Thursday
0B. Every Friday
0B. Every Friday
0C. Every Saturday
0C. Every Saturday
Data2
Data3
00 to 17: 00 to 23 hours
00 to 3B: 00 to 59 minutes
Data2
Data3
00 to 17: 00 to 23 hours
00 to 3B: 00 to 59 minutes
* To read or delete the Off Time Schedule list, [Data2][Data3]
must be set to FFH.
* To read or delete an On Time schedule list, [Data2][Data3]
must be set to FF.
Example 1: fe 01 f1 ff ff – reads the first index data in Off Timer.
Example 2: fe 01 e1 ff ff - deletes the first index data from Off
Timer.
Example 3: fe 01 04 02 03 - sets Off Timer to 02:03 from Monday
to Saturday.
Example 1: fd 01 f1 ff ff - reads the first index data from On
Timer.
Example 2: fd 01 e1 ff ff - deletes the first index data from On
Timer.
Example 3: fd 01 04 02 03 - sets On Timer to 02:03 from Monday
to Saturday.
* This function is only available when Time 1 (year/month/day)
and Time 2 (hour/minute/second) are set.
Acknowledgement
* This function is only available when Time 1 (year/month/day)
and Time 2 (hour/minute/second) are set.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
42
22. On Timer Input (Command: f u)
Select an external input for the current On Time setting and add
a new schedule.
23. No Signal Power Off (15Min) (Command: f g)
Sets the monitor to enter Automatic Standby mode if there is
no signal for 15 minutes.
Transmission
Transmission
[f][u][ ][Set ID][ ][Data1][Cr]
[f][g][ ][Set ID][ ][Data][Cr]
[f][u][ ][Set ID][ ][Data1][][Data2][Cr]
Data
00: Off
01: On
Data (Add schedule)
40: COMPONENT
60: RGB
Acknowledgement
70: DVI-D
A0: HDMI1
[g][ ][Set ID][ ][OK/NG][Data][x]
A1: HDMI2/OPS
A2: OPS/HDMI3/DVI-D
A5: OPS/DVI-D
A8: OPS
D0: DISPLAYPORT
Data1 (Read schedule)
1. f1h to f7h (Read data)
F1: Select the 1st schedule input
F2: Select the 2nd schedule input
F3: Select the 3rd schedule input
F4: Select the 4th schedule input
F5: Select the 5th schedule input
F6: Select the 6th schedule input
F7: Select the 7th schedule input
24. Auto Power Off (4 Hours) (Command: m n)
Sets the monitor to enter Auto Power Off after 4 hours.
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: 4 hours
Acknowledgement
Data2 (Read schedule)
FF
[n][ ][Set ID][ ][OK/NG][Data][x]
* To read the schedule input, enter FF for [Data2].
If no schedule is available for [Data1] when attempting to
read the schedule data, the text ‘NG’will be displayed and the
operation will fail.
(Example 1: fu 01 90 - Move each schedule input down one row
and save the 1st schedule input in HDMI mode.)
(Example 2: fu 01 f1 ff - Read the 1st schedule input.)
* This function is supported only when 1 (Year/Month/Day), 2
(Hour/Minute/Second), On Time (Repeat Mode/Time) are set.
** It may not be supported depending on the model.
Acknowledgement
25. Language (Command: f i)
Sets the OSD language.
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
[u][ ][Set ID][ ][OK/NG][Data][x]
Data
00: Czech
[u][ ][Set ID][ ][OK/NG][Data1][Data2][x]
01: Danish
02: German
03: English
04: Spanish (Europe)
05: Greek
06: French
07: Italian
08: Dutch
09: Norwegian
0A: Portuguese
0B: Portuguese (Brazil)
0C: Russian
0D: Finnish
0E: Swedish
0F: Korean
10: Chinese (Mandarin)
11: Japanese
12: Chinese (Cantonese)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
43
26. Reset (Command: f k)
Performs the reset function.
Screen Reset can only be performed in RGB input mode.
Transmission
29. Time Elapsed (Command: d l)
Checks the elapsed time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
[f][k][ ][Set ID][ ][Data][Cr]
Data
FF: Read status
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
Data
00: Picture Reset
01: Screen reset
02: Initial Settings
* The data received is shown as a hexadecimal value.
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.
30. Product serial number (Command: f y)
Checks the serial number of the product.
Transmission
27. Current temperature (Command: d n)
Checks the inside temperature.
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data
FF: Check product serial number
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
[d][n][ ][Set ID][ ][Data][Cr]
Data FF: Check the status
Acknowledgement
* Data is in ASCII code.
[n][ ][Set ID][ ][OK/NG][Data][x]
* Temperature is displayed as a hexadecimal value.
31. Software Version (Command: f z)
Checks the software version of the product.
Transmission
28. Key (Command: m c)
Sends a key code for the IR remote control.
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data
FF: Check software version
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
[m][c][ ][Set ID][ ][Data][Cr]
Data
IR_KEY_CODE
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
For key codes, see IR Codes.
* Some key codes are not supported depending on the model.
44
32. White balance red gain (Command: j m)
Adjusts the white balance red gain value.
Transmission
35. White Balance Red Offset (Command: s x)
Adjusts the white balance red offset value.
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
[s][x][ ][Set ID][ ][Data][Cr]
Data
00 to 7F: Red Offset 0 to 127
FF: checks the red offset value
Acknowledgement
Data
00 to FE: Red Gain 0 to 254
FF: checks the red gain value
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
[m][ ][Set ID][ ][OK/NG][Data][x]
33. White Balance Green Gain (Command: j n)
Adjusts the white balance green gain value.
Transmission
36. White Balance Green Offset (Command: s y)
Adjusts the white balance green offset value.
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
[s][y][ ][Set ID][ ][Data][Cr]
Data
00 to FE: Green Gain 0 to 254
FF: checks the green gain value
Acknowledgement
Data
00 to 7F: Green Offset 0 to 127
FF: checks the green offset value
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
[y][ ][Set ID][ ][OK/NG][Data][x]
37. White Balance Blue Offset (Command: s z)
Adjusts the white balance blue offset value.
Transmission
34. White Balance Blue Gain (Command: j o)
Adjusts the white balance blue gain value.
Transmission
[s][z][ ][Set ID][ ][Data][Cr]
[j][o][ ][Set ID][ ][Data][Cr]
Data
00 to 7F: Blue Offset 0 to 127
FF: checks the blue offset value
Data
00 to FE: Blue Gain 0 to 254
FF: checks the blue gain value
Acknowledgement
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
[o][ ][Set ID][ ][OK/NG][Data][x]
45
38. Backlight (Command: m g)
Adjusts the backlight brightness.
Transmission
41. Check Tile Mode (Command: d z)
Checks the tile mode.
Transmission
[d][z][ ][Set ID][ ][Data][Cr]
[m][g][ ][Set ID][ ][Data][Cr]
Data
FF: checks the tile mode
Data
00 to 64: Backlight 0 to 100
Acknowledgement
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
[g][][set ID][][OK/NG][Data][x]
Data1 00: tile mode off
01: tile mode on
Data2 00 to 0F: tile column
Data3 00 to 0F: tile row
42. Tile ID (Command: d i)
Sets the tile ID value of the product.
Transmission
39. Screen Off (Command: k d)
Turns the screen on or off.
Transmission
[d][i][ ][Set ID][ ][Data][Cr]
[k][d][ ][Set ID][ ][Data][Cr]
Data
01 to E1: Tile ID 1 to 225**
Data
00: turns the screen on
01: turns the screen off
FF: checks the tile ID
** The data value cannot exceed the value of row x column.
Acknowledgement
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
[i][ ][Set ID][ ][OK/NG][Data][x]
* When a data value that exceeds the value of row x column
is entered (except 0xFF),
ACK becomes NG.
43. Natural Mode (in Tile mode) (Command: d j)
When displaying the image naturally, the part of the image
that would normally be displayed in the gap between the
monitors is omitted.
40. Tile Mode (Command: d d)
Sets the Tile Mode and sets values for the tile rows and
columns.
Transmission
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
[d][j][ ][Set ID][ ][Data][Cr]
Data
00 to FF: The first byte - tile column
The second byte - tile row
Data
00: Off
01: On
* 00, 01, 10, and 11 mean that the tile mode is off
** The maximum value may differ depending on the model.
Acknowledgement
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
[d][ ][Set ID][ ][OK/NG][Data][x]
46
44. DPM Select (Command: f j)
To set the DPM (Display Power Management) function.
Transmission
47. Fail Over Select (Command: m i)
Selects an input mode for auto switch.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
[f][j][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Auto
02: Manual
Data
00: Off
01: 5 seconds
02: 10 seconds
03: 15 seconds
04: 1 minutes
05: 3 minutes
06: 5 minutes
07: 10 minutes
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
48. Fail Over Input Select (Command: m j)
Selects an input source for auto switch.
* This command is only available when the Fail Over (auto)
mode is set to Custom.
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ]
[Data4]...[ ][DataN][Cr]
Data 1 to N-1 (Input priority: 1 to N-1)
40: COMPONENT
60: RGB
45. Remote Control/Local Key Lock (Command: k m)
Adjusts the remote control/local key (front) lock.
Transmission
70: DVI-D
90: HDMI1
[k][m][ ][Set ID][ ][Data][Cr]
91: HDMI2/OPS
92: OPS/HDMI3/DVI-D
95: OPS/DVI-D
Data 00: Off (Lock Off)
01: On (Lock On)
* When the monitor is turned off, the power key works even
98: OPS
in On (01) mode.
C0: DISPLAYPORT
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
Data N: E0: INTERNAL Memory
E1: USB
E2: SD CARD
Acknowledgement
[j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4]
...[DataN] [x
]
Data 1 to N-1 (Input priority: 1 to N-1)
40: COMPONENT
60: RGB
70: DVI-D
90: HDMI1
91: HDMI2/OPS
92: OPS/HDMI3/DVI-D
95: OPS/DVI-D
98: OPS
C0: DISPLAYPORT
46. Power On Delay (Command: f h)
Sets the schedule delay when the power turns on. (unit:
seconds).
Data N: E0: INTERNAL Memory
E1: USB
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
E2: SD CARD
* Some input signals may not be available with certain
models.
** The data number (N) may vary depending on the model.
(The data number depends on the number of supported
input signals.)
Data
00 to FA: min. 0 to maximum 250 (seconds)
* The maximum value may differ depending on the model.
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x
*** Only the value of E0, E1, or E2 is acceptable for the last
data.
47
49. IR Operation (Command: t p)
Configures the IR operation settings of the product.
Transmission
52. Check Screen (Command: t z)
Sets Check Screen.
Transmission
[t][p][ ][Set ID][ ][Data][Cr]
[t][z][ ][Set ID][ ][Data][Cr]
Data
00: locks off all of the keys
01: locks on all of the keys except the Power key
Data
00: Off
02: locks on all of the keys
01: On
Acknowledgement
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
[z][ ][Set ID][ ][OK/NG][Data][x]
* When the monitor is turned off, the power key works even
in the locks on all of the keys (02) mode.
** It may not be supported depending on the model.
53. Speaker (Command: d v)
Sets the speaker function.
Transmission
50. Local Key Operation (Command: t o)
Configures the local key operation settings of the product.
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
[t][o][ ][Set ID][ ][Data][Cr]
Data
00: locks off all of the keys
Acknowledgement
01: locks on all of the keys except the Power key
02: locks on all of the keys
[v][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
* When the monitor is turned off, the power key works even
in the locks on all of the keys (02) mode.
54. Daylight Saving Time (Command: s d)
To set theDaylight Saving Time function.
Transmission
51. Status (Command: s v)
Checks the current signal status of the product.
Transmission
[s][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ][Data4]
[ ][Data5][Cr]
[s][v][ ][Set ID][ ][Data][ ][FF][Cr]
Data
00: Off (Data2~5: FFH)
01: Start Time
02: End Time
Data
02: checks whether there is a signal or not
03: check the PM mode.
10: RGB sensing OK/NG (Check Screen)
Data2 01~0C: January to December
Data3 01~06: 1 ~ 6th week
* The maximum number of [Data3] differs depending on
Date.
Data4 00~06 ( Sun. ~ Sat. )
Data5 00~17: 00 ~ 23 hours
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][Data1][x]
Data:
Data1 00: no signal
01: there is a signal
02 (when a signal is found)
* To read the Start Time/End Time, enter FFH for
[Data2]~[Data5].
Data:
03 (when checking the PM mode)
Data1 00: The PM mode is set to Screen On
01: The PM mode is set to Screen Off
(ex1: sd 01 01 ff ff ff ff - To check the Start Time
ex2: sd 01 02 ff ff ff ff - To check the End Time)
* This function is supported only when 1 (Year/Month/ Day)
and 2 (Hour/Minute/Second) are set.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][Data4]
[Data5][x]
02: The PM mode is set to Screen Off Always
Data:
10 (Check Screen)
Data1 00: Check Screen result NG
07: Check Screen result OK
* Sets to NG when Check Screen is set to Off or not supported.
** It may not be supported depending on the model.
48
* If Data1 is 81,
Data2 : DNS address
FF: Views the temporary DNS address.
* If Data1 is 82,
55. PM Mode (Command: s n, 0c)
Selects the desired PM mode option.
Transmission
[s][n][ ][Set ID][ ][0c][ ][Data][Cr]
Data2 80: Applies the temporarily saved IP mode (Auto/
Manual), subnet mask, and gateway.
81: Applies the temporary DNS address
FF: Information on the current network (IP, subnet
gateway, DNS)
Data
00: Sets the Power Off mode.
01: Sets the Sustain Aspect Ratio mode.
02: Sets the Screen Off mode.
03: Sets the Screen Off Always mode.
*** Examples of settings
Acknowledgement
1. Auto: sn 01 80 00
[n][ ][Set ID][ ][OK/NG][0c][Data][x]
2. Manual: sn 01 80 01 010177223241 255255254000
010177222001 (IP: 10.177.223.241, subnet:
255.255.254.0,
* It may not be supported depending on the model.
gateway: 10.177.222.1)
3. Network read: sn 01 80 ff
4. DNS setting: sn 01 81 156147035018
(DNS: 156.147.35.18)
5. Applying the settings: sn 01 82 80 (applies the saved IP
mode (auto/manual), subnet mask,
and gateway)
56. ISM Method (Command: j p)
Selects the ISM Method option.
Transmission
sn 01 82 81 (applies the saved
DSN)
**** Each IP address contains 12 decimal digits .
Acknowledgement
[j][p][ ][Set ID][ ][Data][Cr]
Data
01: Inversion
02: Orbiter
04: White Wash
08: Normal
[n][ ][Set ID][ ][OK/NG][Data1][Data][x]
20: Color Wash
80: Washing Bar
90: User Image
91: User Video
* It may not be supported depending on the model.
** This feature is available only for wired networks.
** The jp command works when Timer is set to Immediately.
Acknowledgement
58. Auto-adjustment (Command: j u)
Automatically corrects the position and shaking of the picture.
(Works only in RGB-PC input mode.)
[p][ ][Set ID][ ][OK/NG][Data][x]
* It may not be supported depending on the model.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data
01: Execution
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x
]
57. Network Settings (Command: s n, 80 or 81 or 82)
Configures network and DNS settings.
Transmission
* It may not be supported depending on the model.
[s][n][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ][Data4][ ]
[Data5][Cr]
Data1 80: Configures/views the temporary IP mode
(Auto/Manual), subnet mask, and gateway.
81: Configures/views the temporary DNS address.
82: Saves temporary settings and views
information about the current network.
* If Data1 is 80,
59. H Position (Command: f q)
Adjusts the horizontal position of the screen. This feature only
works when the Tile Mode is set to Off.
* The operational range varies depending on the RGB input
resolution. (Works only in RGB-PC input mode.)
Transmission
[f][q][ ][Set ID][ ][Data][Cr]
Data2 00: Auto
01: Manual
FF: Views the temporary IP mode (Auto/Manual),
subnet mask, and gateway.
Data
00-64: Min -50 (Left) to Max 50 (Right)
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
** If Data2 is 01 (Manual),
Data3 : Manual IP address
Data4 : Subnet mask address
Data5 : Gateway address
* It may not be supported depending on the model.
49
63. Wake On LAN (Command: f w)
Selects the desired Wake On LAN option.
Transmission
60. V Position (Command: f r)
Adjusts the vertical position of the screen. This feature only
works when the Tile Mode is set to Off.
* The operational range varies depending on the RGB input
resolution. (Works only in RGB-PC input mode.)
[f][w][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
Transmission
[f][r][ ][Set ID][ ][Data][Cr]
[w][ ][Set ID][ ][OK/NG][Data][x]
Data
00-64: Min -50 (Down) to Max 50 (Up)
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
* It may not be supported depending on the model.
64. Intelligent Auto (Command: t i)
Selects the desired Intelligent Auto option.
Transmission
[t][i][ ][Set ID][ ][Data][Cr]
61. H Size (Command: f s)
Adjusts the horizontal size of the screen. This feature only works
when the Tile Mode is set to Off.
Data
00: Off
01: On
* The operational range varies depending on the RGB input
resolution. (Works only in RGB-PC input mode.)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
Transmission
* It may not be supported depending on the model.
[f][s][ ][Set ID][ ][Data][Cr]
Data
00-64: Min -50 (Small) to Max 50 (Large)
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
* It may not be supported depending on the model.
65. OSD Portrait Mode (Command: t h)
Selects the desired Portrait mode option.
Transmission
[t][h][ ][Set ID][ ][Data] [Cr]
Data
00: Off
01: 90 degrees
02: 270 degrees
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data] [x]
62. Power On Status (Command: t r)
Selects the desired Power On status option.
Transmission
* It may not be supported depending on the model.
[t][r][ ][Set ID][ ][Data][Cr]
Data
00: LST (Stays in the previous status)
01: STD (Stays powered off)
02: PWR (Stays powered on)
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
50
66. Reset to Initial Settings (Command: t n)
Enables/disables the Reset to Initial settings.
Transmission
69. Pivot Mode (Command: t a)
Sets Pivot Mode to on/off.
Transmission
[t][n][ ][Set ID][ ][Data] [Cr]
[t][a][ ][Set ID][ ][Data][Cr
]
Data
00: Disables the settings.
01: Enables the settings.
Data
00: Off
01: On
Acknowledgement
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data] [x]
[a][ ][Set ID][ ][OK/NG][Data][x]
* It may not be supported depending on the model.
* This feature may not be supported in certain models.
67. Time Sync (Command: s n, 16)
Configures the Time Sync.
Transmission
70. Studio Mode (Command: s n, 83)
Sets Studio Mode to on/off.
Transmission
[s][n][ ][Set ID][ ][1][6][ ][Data][Cr]
[s][n][ ][Set ID][ ][8][3][ ][Data][Cr]
Data
00: Off
01: On
Data
00: Off
01: On
Acknowledgemen
* This feature works in the Master mode.
** This feature does not work if the current time is not set.
t
[n][ ][Set ID][ ][OK/NG][8][3][Data][x]
Acknowledgement
[n][ ][Set ID][ ][OK/NG][ ][1][6][ ][Data][x]
* This feature may not be supported in certain models.
* It may not be supported depending on the model.
71. LAN Daisy Chain (Command: s n, 84)
Sets LAN Daisy Chain to on/off.
Transmission
[s][n][ ][Set ID][ ][8][4][ ][Data][Cr]
68. Contents Sync (Command: t g)
Configures the Contents Sync.
Transmission
Data
00: Off
01: On
Acknowledgement
[t][g][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: On
[n][ ][Set ID][ ][OK/NG][8][4][Data][x]
* This feature may not be supported in certain models.
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
* It may not be supported depending on the model.
72. Content Rotation (Command: s n, 85)
Sets Content Rotation to on/off.
Transmission
[s][n][ ][Set ID][ ][8][5][ ][Data][Cr]
Data
00: Off
01: 90 degrees
02: 270 degrees
Acknowledgement
[n][ ][Set ID][ ][OK/NG][8][5][Data][x]
* This feature may not be supported in certain models.
51
73. DPM Wake up Control (Command: s n, 0b)
Sets the DPM Wake up Control Mode.
Transmission
77. Easy Brightness Control Mode (Command: s m)
Selects whether to turn on/off Easy Brightness Control Mode.
Transmission
[s][n][ ][Set ID][ ][0][b][ ][Data][Cr]
[s][m][ ][Set ID][ ][Data][Cr]
Data
00: Clock
01: Clock+DATA
Data
00: Easy Brightness Control off
01: Easy Brightness Control on
Acknowledgement
* This feature does not work if the current time is not set.
[n][ ][Set ID][ ][OK/NG][0][b][Data][x]
** This may not be supported on some models.
Acknowledgement
* This feature may not be supported in certain models.
[m][ ][Set ID][ ][OK/NG][Data][x]
74. Scan Inversion (Command: s n, 87)
Sets Scan Inversion to on/off.
Transmission
[s][n][ ][Set ID][ ][8][7][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[n][ ][Set ID][ ][OK/NG][8][7][Data][x]
* This feature may not be supported in certain models.
75. Beacon (Command: s n, 88)
Sets Beacon to on/off.
Transmission
[s][n][ ][Set ID][ ][8][8][ ][Data][Cr]
Data
00: Off
01: On
Acknowledgement
[n][ ][Set ID][ ][OK/NG][8][8][Data][x]
* This feature may not be supported in certain models.
76. Aspect Ratio (Rotation) (Command: s n, 89)
Controls the Aspect Ratio (Rotation) screen.
(This command works only when Content Rotation is on.)
Transmission
[s][n][ ][Set ID][ ][8][9][ ][Data][Cr]
Data
00: Full
01: Original
Acknowledgement
[n][ ][Set ID][ ][OK/NG][8][9][Data][x]
* This feature may not be supported in certain models.
52
79. MultiScreen Mode & Input (Command: x c)
Saves or controls the MultiScreen Mode and input.
Transmission
78. Easy Brightness Control Schedule (Command: s s)
Sets Easy Brightness Control schedules.
Transmission
[x][c][ ][Set ID][ ][Data1][ ][Data2][ ][Data3[ ][Data4]
[ ][Data5[ ]Cr]
[s][s][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
1. F1–F6 (reads data)
Data1 (sets the MultiScreen Mode)
10: PIP
22: PBP2
23: PBP3
F1: Reads the 1st data from the Easy Brightness Control
F2: Reads the 2nd data from the Easy Brightness Control
F3: Reads the 3nd data from the Easy Brightness Control
F4: Reads the 4th data from the Easy Brightness Control
F5: Reads the 5th data from the Easy Brightness Control
F6: Reads the 6th data from the Easy Brightness Control
2. FF: Reads all stored lists
24: PBP4
Data2 (sets the MultiScreen Main Input)
Data3 (sets the MultiScreen Sub1 Input)
Data4 (sets the MultiScreen Sub2 Input)
Data5 (sets the MultiScreen Sub3 Input)
20: AV
40: COMPONENT
60: RGB
80: DVI-D
90: HDMI1
91: HDMI2/OPS
92: OPS/HDMI3/DVI-D
95: OPS/DVI-D
98: OPS
C0: DISPLAYPORT
3. e1-e6 (deletes one index); e0 (deletes all indexes)
E0: Deletes all Easy Brightness Control.
E1: Deletes the 1st Easy Brightness Control.
E2: Deletes the 2nd Easy Brightness Control.
E3: Deletes the 3rd Easy Brightness Control.
E4: Deletes the 4th Easy Brightness Control.
E5: Deletes the 5th Easy Brightness Control.
E6: Deletes the 6th Easy Brightness Control.
4. 00 to 17: 00th to 23th hour
Data2
Data3
00 to 3B: 00th to 59th minute
00 to 64: Backlight, 0 to 100
Acknowledgement
[c][ ][Set ID][ ][OK/NG][ ][Data1][Data2][Data3]
[Data4] [Data5][x]
* If you want to read or delete the configured Easy Brightness
Control lists, set [Data2][Data3] to FF.
* If you want to import all the configured Easy Brightness
Control lists through FF, do not enter any values in [Data2]
[Data3].
* When all the configured Easy Brightness Control lists are
imported through FF, OK is acknowledged even if there is
no stored list.
* This feature may not be supported in certain models.
** Only the input modes supported by the model works.
Example 1: ss 01 f1 ff ff - Reads the first index data from the Easy
Brightness Control.
Example 2: ss 01 ff - Reads all index data from the Easy
Brightness Control.
Example 3: ss 01 e1 ff ff - Deletes the first index data from the
Easy Brightness Control.
Example 4: ss 01 07 1E 46 - Adds a schedule whose time is 07:30
80. Aspect Ratio (MultiScreen) (Command: x d)
Saves or controls the Aspect Ratio (MultiScreen) screen.
Transmission
[x][d][ ][Set ID][ ][Data1][ ][Data2][Cr]
Data1
01: Controls the Main input
02: Controls the Sub1 input
03: Controls the Sub2 input
04: Controls the Sub3 input
00: Full
and whose backlight is 70.
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Data2
01: Original
Acknowledgement
* This feature may not be supported in certain models.
[d][ ][Set ID][ ][OK/NG][Data1][Data2][x]
* This feature may not be supported in certain models.
53
81. Screen Mute (MultiScreen) (Command: x e)
Turns on/off each screen in MultiScreen.
Transmission
84. Wireless Wake-on-LAN (Command: s n, 90)
Sets Wireless Wake-on-LAN.
Transmission
[x][e][ ][Set ID][ ][Data1][ ][Data2][Cr]
[s][n][ ][Set ID][ ][9][0][ ][Data][Cr]
Data
00: Off
01: On
Data1
01: Controls the Main input
02: Controls the Sub1 input
03: Controls the Sub2 input
04: Controls the Sub3 input
00: Turns the screen on.
Acknowledgement
[n][ ][Set ID][ ][OK/NG][9][0][Data][x]
Data2
* This feature may not be supported in certain models.
01: Turns the screen off.
* This function works when the Multi Screen App is running.
** This function may not work properly if there is no signal.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][x]
* This feature may not be supported in certain models.
85. OSD Display (Command: k l)
Selects the desired OSD Display option.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data
00: No (Off)
01: Yes (On)
Acknowledgement
82. Screen Off Always (Command: s n, 0d)
Screen Off Always has the same effect as entering the Screen
Off menu regardless of the PM Mode setting.
[l][ ][Set ID][ ][OK/NG][Data][x]
Transmission
[s][n][ ][Set ID][ ][0][d][ ][Data][Cr]
* This feature may not be supported for certain models.
Data
00: Off
01: On
Acknowledgement
[n][ ][Set ID][ ][OK/NG][0][d][Data][x]
* This feature may not be supported in certain models.
83. Screen Video Freeze (Command: k x)
Turns on/off the video freeze function.
Transmission
[k][x][ ][Set ID][ ][Data][Cr]
Data
00: Turns on the freeze function.
01: Turns off the freeze function.
* Available in single input mode.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
* This feature may not be supported in certain models.
|
