OWNER’S MANUAL
LG Digital
Signage
(MONITOR SIGNAGE)
Please read this manual carefully before operating your set and retain it
for future reference.
55VH7B
55VM5B
3
► This may cause injury and/or damage to the product.
Safety precautions
Please read these safety precautions carefully before using the
product.
• When connecting it to a game device, keep a distance of four times
the diagonal measurement of the screen from the device.
► If the product falls because of the short cable, this may cause injury
and/or damage to the product.
• Leaving a fixed image on the screen for a long time may cause
damage to the screen and cause image burn-in. To use the product
for a long period of time, use a screen saver on the PC or utilize
the residual image prevention function on the product, and when
the product is not used, turn off the power. Burn-in and related
problems are not covered by the warranty on this product.
• Do NOT install this product on a wall where there is high risk of
exposure to oil fumes or mist.
WARNING
If you ignore the warning message, you may be seriously injured
or there is a possibility of accident or death.
CAUTION
If you ignore the caution message, you may be slightly injured or
the product may be damaged.
► This may damage product and cause it to fail.
CAUTION
WARNING
• Indoor Use Only.
• Make sure the product ventilation holes are not blocked. Install
the product in a suitably wide place (more than 100 mm from
the wall)
► If you install the product too close to the wall, it may be deformed or
fire can break out due to internal heat.
• Do not block the ventilation hole of the product by a tablecloth
or curtain.
► The product can be deformed or fire can break out due to overheating
inside the product.
• Install the product on a flat and stable place that has no risk of
dropping the product.
► If the product is dropped, you may be injured or the product may
be broken.
• Install the product where no EMI occurs.
• Keep the product away from direct sunlight.
Precautions In Installing the
Product
WARNING
• Keep away from heat sources like electrical heaters.
► Electrical shock, fire, malfunction, or deformation may occur.
• Keep the packing anti-moisture material or vinyl packing out of
the reach of children.
► Anti-moisture material is harmful if swallowed. If swallowed by
mistake, force the patient to vomit and visit the nearest hospital.
Additionally, vinyl packing can cause suffocation. Keep it out of the
► The product can be damaged.
• If you install the product in a place that does not meet the
recommended conditions, this may cause serious damage to the
product’s picture quality, life cycle, and appearance. Please check
with LG or a qualified installer before installing. This caution
applies to a place where there is an abundance of fine dust or oil
mist, chemical substances are used, the temperature is very high
or low, the humidity is very high, or the product is likely to remain
turned on for a long period of time (airport and train station).
failure to do so will invalidate the warranty.
• Do not install the product in an area with poor ventilation (e.g.on
a bookshelf, in a closet) or outside and avoid placing on cushions
or carpets.
• In addition, do not install it where there are heating objects such
as lighting equipment.
reach of children.
• Do not put heavy objects on the product or sit upon it.
► If the product collapses or is dropped, you may be injured. Children
must pay particular attention.
• Do not leave the power or signal cable unattended on the
pathway.
► The passerby can trip or fall, which can cause electrical shock, fire,
product breakdown, or injury.
• Install the product in a neat and dry place.
► Dust or moisture can cause electrical shock, fire or product damage.
• If you can smell smoke or other odors or hear a strange sound
unplug the power cord and contact the service center.
► If you continue to use without taking proper measures, electrical
shock or fire can occur.
• If you dropped the product or the case is broken, turn off the
product and unplug the power cord.
► If you continue to use without taking proper measures, electrical
shock or fire can occur. Contact the service center.
• Do not drop an object on or apply impact to the product. Do not
throw any toys or objects on the product screen.
► It can cause injury to human, problem to product and damage the
display.
• Do not let the product fall or drop when connecting it with an
external device.
4
• As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if the unit is turned
off.
Precautions to the AC Adapter
and Electrical Power
CAUTION
WARNING
• Be sure to keep the outlet, AC adapter, and pins of the power plug
• If water or any foreign substance goes inside the product (TV,
monitor, power cord, or AC adapter), disconnect the power cord
immediately and contact the service center.
clean from dust and etc.
► This may cause a fire.
• Do not unplug the power cord while the product is in use.
► Otherwise, this may cause a fire or electric shock due to damage to
the product.
► Electrical shock can damage the product.
• Use only the power cord supplied with the unit. If you use another
power cord, make sure that it is certified by the applicable national
standards when not provided by the supplier. If the power cable is
faulty in any way, please contact the manufacturer or the nearest
• Do not touch the power plug or AC adapter with wet hands. If the
pins of the plug are wet or dusty, wipe and dry them before use.
► Otherwise, this may cause a fire or electric shock.
• Make sure to completely insert the power cord into the AC adapter.
► If loosely connected, the poor connection may cause a fire or electric
shock.
authorized repair service provider for a replacement.
• Be sure to use power cords and AC adapters provided or approved
by LG Electronics, Inc.
► The use of non-approved products may cause a fire or electric shock.
• When unplugging the power cord, always pull it by the plug. Do
not bend the power cord with excessive force.
► The power line can be damaged, which may cause electric shock
or fire.
• Be careful not to step or place heavy objects (electronic appliances,
clothing, etc.) on the power cord or AC adapter. Be careful not to
damage the power cord or AC adapter with sharp objects.
► Damaged power cords may cause a fire or electric shock.
• Never disassemble, repair or modify the power cord or AC adapter.
► This may cause a fire or electric shock.
• Make sure to connect the power cable to the grounded current.
► You may be electrocuted or injured.
• Use the rated voltage only.
► The product can be damaged, or you may be electrocuted.
• In the presence of thunder and lightning, never touch the power
cord and signal cable because it can be very dangerous.
► It can cause electric shock.
• Do not connect several extension cords, electrical appliances,
or electrical heaters to a single outlet. Use a power strip with a
grounding terminal designed for exclusive use with the computer.
► A fire can break out due to overheating.
• Do not touch the power plug with wet hands. Additionally, if
the cord pin is wet or covered with dust, dry the power plug
completely or wipe dust off.
► You may be electrocuted due to excess moisture.
• If you don't intend to use the product for a long time, unplug the
power cable from the product.
► Covering dust can cause a fire, or insulation deterioration can cause
electric leakage, electric shock or fire.
• Fix the power cable completely.
► If the power cable is not fixed completely, a fire can break out.
• Do not insert a conductor (like a metal chopstick) into one end
of the power cable while the other end is connected to the input
terminal on the wall. Additionally, do not touch the power cable
right after plugging into the wall input terminal.
► You may be electrocuted.
• The appliance coupler is used as the disconnect device.
• Please make sure the device is installed near the wall outlet to
which it is connected and that the outlet is easily accessible.
5
• Do not press strongly upon the panel with a hand or sharp object
such as nail, pencil, or pen, or make a scratch on it.
• Keep the proper distance from the product.
► Your vision may be impaired if you look at the product too closely.
• Set the appropriate resolution and clock by referring to the User’s
Guide.
Precautions In Moving the
Product
WARNING
• Make sure to turn off the product.
► Your vision can be impaired.
► You may be electrocuted or the product can be damaged.
• Make sure to remove all cables before moving the product.
• Use authorized detergent only when cleaning the product. (Do not
use benzene, thinner, or alcohol.)
► You may be electrocuted or the product can be damaged.
• Make sure the panel faces forward and hold it with both hands to
move. If you drop the product, the damaged product can cause
electric shock or fire. Contact an authorized the service center for
repair.
• Make sure the product is turned off, unplugged, and all cables
have been removed. It may take 2 or more people to carry larger
apparatus. Do not press against or put stress on the front panel of
the apparatus.
► Product can be deformed.
• Do not expose to dripping or splashing and do not place objects
filled with liquids, such as vases, cups, etc. on or over the
apparatus (e.g. on shelves above the unit).
• Batteries should not be exposed to excessive heat. For example,
keep away from direct sunlight, open fireplace, and electric
heaters.
• Do NOT place non-rechargeable batteries in charging device.
• Using headsets (earphones) for a long time or listening loudly can
cause damage to your hearing.
• Spray water onto a soft cloth 2 to 4 times, and use it to clean the
front frame; wipe in one direction only. Too much moisture may
cause staining.
CAUTION
• Do not shock the product when moving it.
► You may be electrocuted or the product can be damaged.
• Do not dispose the product-packing box. Use it when you move.
Precautions In Using the
Product
WARNING
• Do not use products using high voltage around the Monitor.
(e.g., a bug zapper)
• Do not disassemble, repair or modify the product at your own
discretion.
► Monitor may have malfunction as its electrical shock.
► Fire or electric shock accident can occur.
► Contact the service center for check, calibration or repair.
• When the display is to be left unattended for an extended period
of time, unplug it from the wall outlet.
• Keep the product away from water.
► Fire or electric shock accident can occur.
• Do not shock or scratch the front and sides of the screen with
metallic objects.
Mounting on a Wall
• Do NOT install this product by yourself as you may injure yourself
or cause damage to product. Please contact service personnel
authorised by manufacturer.
► Otherwise, it may cause damage to the screen.
• Avoid high temperatures and humidity.
CAUTION
• Do not put or store inflammable substances near the product.
► There is a danger of explosion or fire due to careless handling of the
inflammable substances.
• When cleaning the product, unplug the power cord and scrub
gently with a soft cloth to prevent scratching. Do not clean with a
wet cloth or spray water or other liquids directly onto the product.
An electric shock may occur. (Do not use chemicals such as
benzene, paint thinners, or alcohol)
• Take a rest from time to time to protect your vision.
• Keep the product clean at all times.
• Take a comfortable and natural position when working with a
product to relax the muscles.
• Take a regular break when working with a product for a long time.
6
LICENSES
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX®
video.
registration code in the DivX VOD section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p,including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are
used under license.
Covered by DivX Patents 7,295,673; 7,515,710; RE45,052; and others available at
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
Licensing Limited. DTS, DTS-HD, the Symbol, & DTS or DTS-HD and the Symbol
together are registered trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.
7
ASSEMBLY AND PREPARATION
CAUTION
• Always use genuine components to ensure safety and product performance.
• The product warranty will not cover damage or injury caused by the use of counterfeit components.
NOTE
• The accessories provided with your product may vary depending on the model or region.
• Product specifications or contents in this manual may be changed without prior notice due to upgrade of
product functions.
• SuperSign Software & Manual
- Downloading from the LG Electronics website.
- Visit the LG Electronics website (www.lgecommercial.com/supersign) and download the latest software for
your model.
• Product damage from moving or changing the installation location is not covered by warranty.
• The warranty will not cover any damage caused by using the product in an excessively dusty environment.
Optional Accessories
Without prior notice, optional accessories are subject to change to improve the performance of the product,
and new accessories may be added. The illustrations in this manual may differ from the actual product and
accessories.
AN-WF500
Wi-Fi Dongle kit
8
Connecting
Cable
KT-OPSA
Screws
Card
(Easy Setup Guide)
Power Cord
OPS kit
NOTE
• Optional accessories are available for some models. If necessary, please purchase them separately.
9
Parts and Buttons
To Install in a Portrait Layout
The image may be different according to the model.
When installing in a Portrait Layout, rotate the
monitor clockwise 90 degrees (when facing the
screen).
Remove brackets before
Installation
Make sure that the protection pads are removed
from each corner before installing the product.
Buttons
INPUT: Changes the input source.
MENU: Accesses the main menus, or saves
your input and exits the menus.
UP/DOWN: Adjust the up and down.
L/R: Moves left and right.
AUTO/SET: Displays the current signal and
mode.
y
y
y
y
y
/I: Turns the power on or off.
y
NOTE
• Keep the removed protection pads and use
them when moving the product later.
10
STORAGE METHOD FOR PANEL PROTECTION
Correct Method
Incorrect Method
Panel
Panel
If the product needs to be set upright, hold both
sides of the product, and tilt backward carefully for.
Do not let the panel to touch the floor.
If the product is tilted onto the bezel, the bottom
of the panel may be damaged.
Panel
Cushion
Panel
When laying down the product, lay a cushion on
a flat floor. Put the product on it with the panel of
the product facing down.
Panel
If the product is tilted onto the edge of the panel,
the panel may be damaged.
If there is not a cushion available, ensure the floor
is clean and then lay the product down carefully
with the panel facing either upward or downward.
At this time, be careful for objects not to fall on the
panel.
11
Installing on a Wall
To install the Monitor on a wall (optional), use the
VESA screws provided as accessories to fasten it.
CAUTION
• Disconnect the power cord before moving or
installing the monitor to avoid risk of electric
shock.
100 mm
200 mm
• If you install the monitor on a ceiling or slanted
wall, it may fall and result in injury. Use an
authorized LG wall mount and contact your local
dealer or qualified personnel to assist with the
installation.
100 mm
100 mm
• Do not over tighten the screws as this may
damage the monitor and void your warranty.
• Use only screws and wall mounting brackets
that meet the VESA standard. Any damage or
injuries caused by misuse or use of improper
accessories are not covered by the warranty.
• To prevent injury, this apparatus must be
securely attached to the wall in accordance with
the installation instructions. (This pertains only
to Australia and New Zealand.)
100 mm
Install the monitor at least 100 mm away from the
wall and leave about 200 mm of space at each side
of the monitor to ensure sufficient ventilation.
Use the wall mount plate and screws that comply
with the VESA standard.
NOTE
• Do not install the product in a place with no
ventilation (e.g., on a bookshelf or in a closet)
or on a carpet or cushion. If there is no other
option but to mount the product on the wall,
make sure that sufficient ventilation is provided
before installation.
- Failure to do so may result in a fire due to the
increase in the internal temperature.
• The illustration shows a general example of
installation and may look different from the
actual product.
12
1
Insert and tighten the eyebolts, or brackets and
bolts on the back of the monitor.
Securing the monitor to a wall (optional)
(Procedure may differ depending on the model.)
- If there are already bolts inserted in the
eyebolts’position, remove the other bolts first.
2
3
Mount the wall brackets with the bolts to the
wall. Match the location of the wall bracket and
the eyebolts on the rear of the monitor.
Connect the eyebolts and wall brackets tightly
with a sturdy cord.
Make sure the securing cord is horizontal with
the flat surface.
WARNING
• If the monitor is not positioned in a sufficiently stable location, there is a danger that it will fall. Many injuries,
particularly to children, can be avoided by taking simple precautions such as:
» Only using furniture that can safely support the monitor.
» Ensuring the monitor is not overhanging the edge of the supporting furniture.
» Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both
the furniture and the monitor to a suitable support.
» Not placing cloth or other materials between the monitor and supporting furniture.
» Educating children about the dangers of climbing on furniture to reach the monitor or its controls.
CAUTION
• Make sure that children do not climb on or hang from the monitor.
NOTE
• Use a platform or cabinet that is large and strong enough to support the monitor securely.
• Brackets, bolts, and cords are sold separately. You can obtain additional accessories from your local retail
store.
• The illustration shows a general example of installation and may look different from the actual product.
13
EXTERNAL EQUIPMENT SETUP
IR RECEIVER
This allows a remote control sensor to be placed in a custom location. Then that display can control other
displays via an RS-232C cable.
Tiling Displays
How to Mount the Set
Example of 2 x 2 Tiling
Using the screws for attaching the VESA wall mount, mount the set to the wall mount plate or the wall.
Screws for attaching the
VESA wall mount (M6)
600
14
How to Join Sets
1
Join other sets using screws for fixing the VESA wall mount in the same way as above.
Set 4 joined to the rest of the sets
(2 x 2 tiling)
2
After joining the sets, use the tiling guide to adjust the gap between the sets.
(M4 x L6)
3
Now the 2 x 2 tiling is complete.
You can tile in various combinations, such as 3 x 3.
NOTE
• The load applied to each set should be supported by the wall mount plate or the wall using a VESA wall
mount (600 x 400).
• The load applied to each set should be supported by the wall mount plate using a VESA wall mount. (Each
set must be firmly mounted to the wall mount plate or the wall.)
• You may mount the set without using the tiling guide; this does not affect the performance of the device.
• The screws are enclosed with the other components in the box, including the tiling guides.
15
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please read this manual
carefully to use the monitor correctly.
To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the
labels inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the actual
accessories.
CAUTION
• Do not mix old and new batteries, as this may
damage the remote control.
• Be sure to point the remote control toward the
remote control sensor on the monitor.
(POWER) Turns the monitor on or off.
MONITOR ON Turns the monitor on.
MONITOR OFF Turns the monitor off.
ENERGY SAVING Adjusts the brightness of the picture to reduce energy
consumption.
INPUT Selects the input mode.
3D Used for viewing 3D videos. (This model does not support this.)
1/a/A Toggles between numerical and alphabetical.
(Depending upon the model, this feature may not be supported.)
Number and Alphabet buttons
Enters numerical or alphabetical characters depending upon the setting.
(Depending upon the model, this feature may not be supported.)
CLEAR Deletes the entered numerical or alphabetical character.
(Depending upon the model, this feature may not be supported.)
Volume Up/Down Button Adjusts the volume.
ARC Selects the Aspect Ratio mode.
AUTO Automatically adjusts picture position and minimizes image
instability (available for RGB input only). (Depending upon the
model, this feature may not be supported.)
MUTE Mutes all sounds.
BRIGHTNESS Adjusts the brightness of the display. PAGE function is not
supported in this model. (Depending upon the model, this
feature may not be supported.)
16
PSM Selects the Picture Mode.
HOME Activates the Launcher.
W.BAL Enters the White Balance menu.
SETTINGS Accesses the main menus or saves your input and exit menus.
S.MENU SuperSign menu key (Depending upon the model, this feature
may not be supported.)
Navigation Buttons Scrolls through menus or options.
OK Selects menus or options and confirms your input.
BACK Allows you to move back one step in the user interaction function.
EXIT Quit all OSD tasks and applications.
Allows you to control various multimedia devices to enjoy
multimedia simply by using the remote control through
the SimpLink menu. (Depending upon the model, this
feature may not be supported.)
TILE Selects the TILE Mode.
PICTURE ID ON/OFF When the Picture ID number matches the Set ID
number, you can control whichever monitor you
want in multi-display format.
USB Menu Control Buttons Controls media playback.
17
MAKING CONNECTIONS
You can connect various external devices to your monitor. Change the input mode and select the external
device you want to connect.
For more information about external device connections, see the user manual provided with each device.
Connecting to a PC
Some of the cables are not provided.
This monitor supports the Plug and Play* feature.
* Plug and Play: a feature that enables a PC to recognize devices attached by the user without device
configuration or user intervention when powering up.
External Device Connection
Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode.
Some of the cables are not provided. For the best picture and sound quality, connecting external devices to
your monitor using HDMI cables is recommended.
Using the Input List
y
RGB, HDMI, DVI-D, DISPLAYPORT, OPS, COMPONENT, AV
18
NOTE
• For the best image quality, using the monitor with HDMI connection is recommended.
• To comply with the standard specifications of the product, use a shielded interface cable with a ferrite core,
such as a DVI-D cable.
• If you turn the monitor on when the set is cold, the screen may flicker. This is normal.
• Sometimes red, green, or blue spots may appear on the screen. This is normal.
• Use a High Speed HDMI®/TM cable.
• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may
not display or a connection error may occur.
• Recommended HDMI Cable Types
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
• If you cannot hear any sound in HDMI mode please check your PC settings. Some PCs require you to
manually change the default audio output to HDMI.
• If you want to use HDMI-PC mode, you must set your PC/DTV to PC mode.
• You may experience compatibility issues if you use HDMI-PC mode.
• Make sure the power cable is disconnected.
• If you connect a gaming device to the monitor, use the cable provided with the gaming device.
• High Speed HDMI®/TM cables transmit a HD signal up to 1080p and higher.
• Use the standard Macintosh adapter since an incompatible adapter is available in the market. (Different
signaling system)
• Apple computers may require an adapter to connect to this monitor. Call or visit their web site for more
information.
• When connecting to the component port using the shared interface, the port must match up to the input
source. Otherwise, noise may occur.
• When connecting an external audio device, use a device with audio amplifier.
CAUTION
• Connect the signal input cable and tighten it by turning the screws clockwise.
• Do not press the screen with your finger for a prolonged period as this may result in temporary distortion on
the screen.
• Avoid displaying static images on the screen for a long period of time to prevent image burn. Use a
screensaver if possible.
• A wireless communication device near your monitor can affect the image.
19
Daisy Chain Monitors
To use different products connected to each other, connect one end of the signal input cable (DP Cable) to the
DP Out connector of Monitor 1 and connect the other end to the DP In connector of the other product.
Monitor 1
Monitor 2
Monitor 3
Monitor 4
NOTE
• If the signal cable between the product and your PC is too long, make sure to use the Booster or optical
cable.
• Daisy chaining the video output may be limited depending on the performance of the input device that
supports HDCP.
20
TROUBLESHOOTING
No image is displayed.
Problem
Action
Is the product power cord connected?
y Check if the power cord is correctly plugged into the power
outlet.
Does the “Invalid Format”message
appear?
y The signal from the PC (graphics card) is out of the vertical or
horizontal frequency range of the product. Adjust the frequency
range by referring to the Specifications in this manual.
Does the “No Signal”message appear?
y The signal cable between PC and product is not connected.
Check the signal cable.
y Press the INPUT menu in the remote Control to check the input
signal.
The Unknown Product message appears when the product is connected.
Problem
Action
Did you install the driver?
y Check if the Plug and Play function is supported by referring to
the graphics card user manual.
The screen image looks abnormal.
Problem
Action
Is the screen position wrong?
y Check if the graphics card resolution and frequency are
supported by the product. If the frequency is out of range, set to
the recommended resolution in the Control Panel Display Setting
menu.
The screen is displayed abnormally.
y The proper input signal is not connected to the signal port.
Connect the signal cable that matches with the source input
signal.
After-image appears on the product.
Problem
Action
After-image appears when the
product is turned off.
y If you use a fixed image for a long time, the pixels may be
damaged. Use the screen-saver function.
y When a dark image is displayed on the screen after an image
with high contrast (black and white or gray), this may cause
image sticking. This is normal for LCD screen products.
21
The audio function does not work.
Problem
Action
No sound?
y See if the audio cable is connected properly.
y Adjust the volume of the external device.
y See if the sound is set properly.
Sound is too dull.
Sound is too low.
y Select the appropriate equalizing sound of the external device.
y Adjust the volume of the external device.
Screen color is abnormal.
Problem
Action
Screen has poor color resolution (16
colors).
y Set the number of colors to more than 24 bits (true color). Select
Control Panel - Display - Settings - Color Table menu in Windows.
Screen color is unstable or
mono-colored.
y Check the connection status of the signal cable. Or, re-insert the
PC graphics card.
Do black spots appear on the screen?
y Several pixels (red, green, white, or black color) may appear
on the screen, which can be attributable to the unique
characteristics of the LCD panel. This is not a malfunction of the
LCD.
The operation does not work normally.
Problem
Action
The power suddenly turned off.
y Is the Timer set?
y Check the power control settings. Power interrupted.
NOTE
• The software-related contents may be changed without prior notice due to upgrade of the product
functions.
22
CAUTION
• Image sticking does not occur when using constantly changing images but may occur when using a fixed
image for an extended period of time. Therefore, it is recommended that you use the instructions below
to decrease the likelihood of image sticking occurring when using a fixed image. It is recommended that
you change the screen at least once every 12 hours at the very minimum; if done more frequently, the
prevention of image sticking is more effective.
Recommended operating conditions
Change the background and the character
colors using the same time interval.
1
Change the image using the same time
interval.
2
ID: UPM 123
PW: ****
ID: UPM 123
PW: ****
When changing colors, using complementary
colors helps to prevent image sticking.
Make sure that the characters or images before
changing the image remain in the same location
after changing the image.
What is image sticking?
Glass
BM
BM
BM
When the LCD panel displays a static image for an
extended period of time, it can cause a voltage
difference between the electrodes that operate
the liquid crystals. When the voltage difference
between the electrodes builds up over time, liquid
crystals have a tendency to remain aligned in
one direction. During this process, a previously
displayed image remains visible. This phenomenon
is referred to as image sticking.
CF
CF
CF
CF
OC
PI
LC
PI
TFT Layers
Glass
ITO or MoTi Pixel Layer
23
PRODUCT SPECIFICATIONS
The product specifications below may be changed without prior notice due to upgrade of product functions.
”refers to alternating current (AC), and “ ”refers to direct current (DC).
“
LCD screen
Video signal
Screen type
Thin Film Transistor (TFT)
Liquid Crystal Display (LCD) Screen
HDMI, DISPLAYPORT: 3840 x 2160 @ 30 Hz
RGB, DVI-D, OPS: 1920 x 1080 @ 60 Hz
Maximum resolution
- This may not be supported on some OS or graphic card
types.
Recommended
resolution
1920 x 1080 @ 60 Hz
- This may not be supported on some OS or graphic card
types.
Horizontal frequency
Vertical frequency
RGB : 30 kHz to 83 kHz
HDMI/OPS/DVI-D/DISPLAYPORT : 30 kHz to 83 kHz
RGB : 50 Hz to 75 Hz
HDMI/OPS/DVI-D/DISPLAYPORT : 56 Hz to 60 Hz
3840 x 2160 24p, 25p, 30p.
Synchronization
Separate Sync, Digital
Input/ Output ports
Embedded battery
IR IN, RS-232C IN/OUT, HDMI IN, DVI-D IN, DP IN/OUT,
USB 2.0 IN, USB3.0 IN, RGB/COMPONENT/AV IN,
AUDIO IN/OUT, LAN IN/OUT
Applied
Environmental
Conditions
Operating Temperature 0 °C to 40 °C
Operating Humidity
Storage Temperature
Storage Humidity
10 % to 80 %
-20 °C to 60 °C
5 % to 95 %
24
55VH7B
LCD screen
Pixel Pitch
0.630 mm (H) x 0.630 mm (V)
AC 100-240 V~ 50/60 Hz 2.7 A
On Mode: 220 W (Typ.)
Power
Rated Voltage
Power Consumption
Sleep Mode (DISPLAYPORT): ≤ 0.7 W
Sleep Mode (HDMI, DVI-D, RGB): ≤ 1 W
Off Mode: ≤ 0.5 W
Dimensions (Width x
Height x Depth) /
1211.4 mm x 682.2 mm x 86.5 mm / 18.6 kg
Weight
55VM5B
LCD screen
Power
Pixel Pitch
0.630 mm (H) x 0.630 mm (V)
Rated Voltage
Power Consumption
AC 100-240 V~ 50/60 Hz 2.7 A
On Mode: 160 W (Typ.)
Sleep Mode (DISPLAYPORT): ≤ 0.7 W
Sleep Mode (HDMI, DVI-D, RGB): ≤ 1 W
Off Mode: ≤ 0.5 W
Dimensions (Width x
Height x Depth) /
1211.4 mm x 682.2 mm x 86.5 mm / 18.6 kg
Weight
25
DVI-D (PC) Support Mode
RGB (PC) Support mode
Horizontal
Resolution
Vertical
frequency (Hz)
Horizontal
Resolution
Vertical
frequency (kHz)
frequency (kHz) frequency (Hz)
640 x 480
31.469
37.879
48.363
53.783
45
59.94
60.317
60
640 x 480
31.469
37.5
59.94
75
800 x 600
640 x 480
1024 x 768
1152 x 864
1280 x 720
1366 x 768
1280 x 1024
1600 x 900
1680 x 1050
1920 x 1080
720 x 400
31.468
37.879
46.875
49.725
48.363
60.023
53.783
45
70.8
59.959
60
800 x 600
60.317
75
800 x 600
47.712
63.981
60
59.79
60.02
60
832 x 624
74.55
60
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 1024
1280 x 1024
1360 x 768
1600 x 900
1680 x 1050
1920 x 1080
75.029
59.959
60
65.29
67.5
59.954
60
63.981
79.98
47.712
60
60.02
75.02
60.015
60
OPS (PC) Support Mode
Horizontal
Resolution
Vertical
frequency (Hz)
65.290
67.5
59.954
60
frequency (kHz)
640 x 480
31,469
59,94
60,317
60
800 x 600
37,879
48,363
53,783
45
1024 x 768
1152 x 864
1280 x 720
1280 X 800
1366 x 768
1280 x 1024
1600 x 900
1680 x 1050
1920 x 1080
59,959
60
HDMI / DISPLAYPORT (PC) Support Mode
49,702
47,712
63,981
60
59,81
59,79
60,02
60
Horizontal
frequency (kHz) frequency (Hz)
Vertical
Resolution
640 x 480
31.469
37.879
48.363
53.783
45
59.94
60.317
60
800 x 600
1024 x 768
1152 x 864
1280 x 720
1280 X 800
1366 x 768
1280 x 1024
1600 x 900
1680 x 1050
1920 x 1080
1920 x 1200
3840 x 2160
65,29
67,5
59,954
60
59.959
60
49.702
47.712
63.981
60
59.81
59.79
60.02
60
65.29
67.5
59.954
60
74.038
67.5
59.95
30
26
HDMI / DISPLAYPORT (DTV) Support Mode
NOTE
Horizontal
frequency (kHz) frequency (Hz)
Vertical
• When the cable is connected to the DVI-D,
HDMI or the Display Port, you can select the
PC/DTV mode optionally. It is recommended
that you select PC mode when connecting to a
PC and select DTV mode when connecting to
other devices. The DTV mode refers to all modes
excluding the PC mode.
• Vertical frequency: The product display
functions by the screen image changing dozens
of times every second like a fluorescent lamp.
The vertical frequency or refresh rate is the
number of image displays per second. The unit
is Hz.
• Horizontal frequency: The horizontal interval
is the time taken to display one horizontal line.
When 1 is divided by the horizontal interval,
the number of horizontal lines displayed every
second can be tabulated as the horizontal
frequency. The unit is kHz.
Resolution
480/60p
576/50p
720/50p
720/60p
1080/50i
1080/60i
1080/50p
1080/60p
1080/60p
2160/24p
2160/25p
2160/30p
31.5
31.25
37.5
45
60
50
50
60
28.1
33.75
56.25
67.432
67.5
54
50
60
50
59.94
60
24
56.25
67.5
25
30
Component Support Mode
Horizontal
Resolution
Vertical
frequency (kHz) frequency (Hz)
720 x 576
15.625
31.25
45
50
720 x 576
50
1280 x 720
1280 x 720
1280 x 720
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
60
37.5
50
44.96
31.25
56.25
33.75
33.72
67.5
59.94
50
50
60
59.94
60
Make sure to read the Safety Precautions
before using the product.
The model and serial numbers of the SET are
located on the back and one side of the SET.
ENERGY STAR® is a set of power-saving guidelines issued
by the U.S.Environmental Protection Agency (EPA).
As an ENERGY STAR® Partner LGE U. S.
A., Inc. has determined that this product
meets the ENERGY STAR® guidelines for
energy efficiency.
WARNING -This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may be
required to take adequate measures.
Refer to ENERGYSTAR.gov for more
information on the ENERGY STAR® program.
Temporary noise is normal when powering ON
or OFF this device.
MODEL
SERIAL
|