LG 55UP7000PUA User Manual

OWNER’S MANUAL  
Safety and Reference  
LED TV*  
* LG LED TV applies LCD screen with LED backlights.  
Please read this manual carefully before operating your set and retain it for  
future reference.  
43UP7000PUA  
50UP7000PUA  
55UP7000PUA  
65UP7000PUA  
*MFL71790121*  
Printed in Korea  
(2101-REV00)  
Copyright © 2021 LG Electronics Inc. All Rights Reserved.  
Title  
Warning! Safety instructions  
Connections  
Preparing  
Troubleshooting  
Specifications  
- Lifting and moving the TV  
- Mounting on the Table  
- Mounting to the Wall  
- Antenna/Cable  
- Open Source Software Notice Information  
- Licenses  
Starting TV  
Regulatory  
- Turning on the TV  
Using Remote Control  
- Using Remote Control  
Before reading this manual  
Read this manual thoroughly before operating your TV, and keep it for future reference.  
On the website you can download the manual including installation, using, troubleshooting, specifications, license etc and view its  
contents on your PC or mobile device.  
User Guide  
For more information about this TV, read the USER GUIDE embedded in the product.  
To open the USER GUIDE [Support] [User Guide]  
Separate Purchase  
Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these  
items. These devices only work with certain models.  
The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.  
A cable to connect antennas and external devices must be purchased separately.  
Product specifications or contents of this manual may be changed without prior notice due to upgrade of product  
Note  
functions.  
The items supplied with your product may vary depending on the model.  
Image shown may differ from your TV.  
3
Warning! Safety instructions  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO  
QUALIFIED SERVICE PERSONNEL.  
This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage”within the product’s enclosure that may be of  
sufficient magnitude to constitute a risk of electric shock to persons.  
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature  
accompanying the appliance.  
WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.  
Ventilation  
TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER  
ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT  
ALL TIMES.  
Do not place the TV and/or remote control in the  
following environments:  
- Keep the product away from direct sunlight.  
- An area with high humidity such as a bathroom.  
- Near any heat source such as stoves and other devices that  
produce heat.  
- Install your TV where there is proper ventilation. Do not  
install in a confined space such as a bookcase.  
- Do not install the product on a carpet or cushion.  
- Do not block or cover the product with cloth or other  
materials while unit is plugged in.  
Take care not to touch the ventilation openings. When  
watching the TV for a long period, the ventilation openings  
may become hot.  
- Near kitchen counters or humidifiers where they can easily  
be exposed to steam or oil.  
- An area exposed to rain or wind.  
- Do not expose to dripping or splashing and do not place  
objects filled with liquids, such as vases, cups, etc. on or  
over the apparatus (e.g., on shelves above the unit).  
- Near flammable objects such as gasoline or candles, or  
expose the TV to direct air conditioning.  
Protect the power cord from physical or mechanical abuse,  
such as being twisted, kinked, pinched, closed in a door, or  
walked upon. Pay particular attention to plugs, wall outlets,  
and the point where the cord exits the device.  
Do not move the TV whilst the Power cord is plugged in.  
Do not use a damaged or loosely fitting power cord.  
Be sure to grasp the plug when unplugging the power cord.  
Do not pull on the power cord to unplug the TV.  
Do not connect too many devices to the same AC power  
outlet as this could result in fire or electric shock.  
- Do not install in excessively dusty places.  
Otherwise, this may result in fire, electric shock, combustion/  
explosion, malfunction or product deformation.  
4
Disconnecting the Device from the Main Power  
- The power plug is the disconnecting device. In case of an  
emergency, the power plug must remain readily accessible.  
If any of the following occur, unplug the product  
immediately and contact your local customer service.  
- The product has been damaged.  
- If water or another substance enters the product (like an AC  
adapter, power cord, or TV).  
Do not let your children climb or cling onto the TV. Otherwise,  
the TV may fall over, which may cause serious injury.  
- If you smell smoke or other odors coming from the TV.  
- When lightning storms or when unused for long periods  
of time.  
Even the TV is turned off by remote control or button, AC  
power source is connected to the unit if not unplugged in.  
Outdoor Antenna Grounding (Can differ by country):  
- If an outdoor antenna is installed, follow the precautions  
below. An outdoor antenna system should not be located in  
the vicinity of overhead power lines or other electric light  
or power circuits, or where it can come in contact with such  
power lines or circuits as death or serious injury can occur.  
Do not use high voltage electrical equipment near the TV  
(e.g., a bug zapper). This may result in product malfunction.  
Be sure the antenna system is grounded to provide some  
protection against voltage surges and built-up static  
charges.  
Do not attempt to modify this product in any way without  
written authorization from LG Electronics. Accidental fire or  
electric shock can occur. Contact your local customer service  
for service or repair. Unauthorized modification could void the  
user’s authority to operate this product.  
Use only an authorized attachments / accessories approved  
by LG Electronics. Otherwise, this may result in fire, electric  
shock, malfunction, or product damage.  
Section 810 of the National Electrical Code (NEC) in  
the U.S.A. provides information with respect to proper  
grounding of the mast and supporting structure, grounding  
of the lead-in wire to an antenna discharge unit, size of  
grounding conductors, location of antenna discharge unit,  
connection to grounding electrodes and requirements for  
the grounding electrode. Antenna grounding according to  
the National Electrical Code, ANSI/NFPA 70  
Never disassemble the AC adapter or power cord. This may  
result in fire or electric shock.  
Grounding (Except for devices which are not grounded.)  
- TV with a three-prong grounded AC plug must be  
connected to a three-prong grounded AC outlet. Ensure  
that you connect the earth ground wire to prevent possible  
electric shock.  
Handle the adapter carefully to avoid dropping or striking it.  
An impact could damage the adapter.  
To reduce the risk of fire or electrical shock, do not touch  
the TV with wet hands. If the power cord prongs are wet or  
covered with dust, dry the power plug completely or wipe  
dust off.  
Never touch this apparatus or antenna during a lightning  
storm. You may be electrocuted.  
Make sure the power cord is connected securely to the TV and  
wall socket if not secured damage to the Plug and socket may  
occur and in extreme cases a fire may break out.  
Do not insert metallic or inflammable objects into the  
product. If a foreign object is dropped into the product,  
unplug the power cord and contact the customer service.  
Do not touch the end of the power cord while it is plugged in.  
You may be electrocuted.  
5
Batteries  
- Store the accessories (battery, etc.) in a safe location out of  
the reach of children.  
- Do not short circuit, disassemble, or allow the batteries  
to overheat. Do not dispose of batteries in a fire. Batteries  
should not be exposed to excessive heat.  
- Caution: Risk of fire or explosion if the battery is replaced  
by an incorrect type.  
Moving  
- When moving, make sure the product is turned off,  
unplugged, and all cables have been removed. It may take  
2 or more people to carry larger TVs. Do not press or put  
stress on the front panel of the TV. Otherwise, this may  
result in product damage, fire hazard or injury.  
Keep the packing anti-moisture material or vinyl packing out  
of the reach of children.  
Do not allow an impact shock, any objects to fall into the  
product, and do not drop anything onto the screen.  
Do not press strongly upon the panel with a hand or a sharp  
object such as a nail, pencil, or pen, or make a scratch on it. It  
may cause damage to screen.  
Cleaning  
- When cleaning, unplug the power cord and wipe gently  
with a soft/dry cloth. Do not spray water or other liquids  
directly on the TV. Do not clean your TV with chemicals  
including glass cleaner, any type of air freshener,  
insecticide, lubricants, wax (car, industrial), abrasive,  
thinner, benzene, alcohol etc., which can damage the  
product and/or its panel. Otherwise, this may result in  
electric shock or product damage.  
6
Preparing  
Lifting and moving the TV  
When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its  
type and size.  
It is recommended to move the TV in the box or packing material that the TV originally came in.  
Before moving or lifting the TV, disconnect the power cord and all cables.  
When holding the TV, the screen should face away from you to avoid damage.  
Hold the side and bottom of the TV frame firmly. Make sure not to hold the transparent part,  
speaker, or speaker grill area.  
Use at least two people to move a large TV.  
When transporting the TV by hand, hold the TV as shown in the following illustration.  
When transporting the TV, do not expose the TV to jolts or excessive vibration.  
When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.  
When handling the TV, be careful not to damage the protruding buttons.  
Avoid touching the screen at all times, as this may result in damage to the screen.  
Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the  
screen.  
When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from  
scratches.  
7
Mounting on the Table  
1
Lift and tilt the TV into its upright position on a table.  
Leave a minimum of 10 cm (4 inches) space from the wall for proper  
ventilation.  
10 cm  
(4 inches)  
2
Connect the power cord to a wall outlet.  
(Depending on model)  
Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the  
product.)  
If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over,  
which may cause injury.  
Do not use any unapproved items to ensure the safety and lifespan of the product.  
Any damages or injuries by using unapproved items are not covered by the warranty.  
Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)  
Do not fasten the screws with excessive force otherwise they may strip and become loose.  
8
Securing TV to the Wall  
1
2
3
Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.  
If there are bolts inserted at the eye-bolts position, remove the bolts first.  
Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the  
eye-bolts on the rear of the TV.  
Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable. Make sure to keep  
the rope parallel to the flat surface.  
Use a platform or cabinet that is strong and large enough to support the TV securely.  
Brackets, bolts and ropes are optional. You can obtain additional accessories from your local  
dealer.  
(Depending on model)  
Mounting to the Wall  
Attach an optional wall mount bracket at the rear of the TV carefully and  
install the wall mount bracket on a solid wall perpendicular to the floor.  
When you attach the TV to other building materials, please contact qualified  
personnel. LG recommends that wall mounting be performed by a qualified  
professional installer. Please use a wall mount bracket where the device is  
adequately secured to the wall with enough space to allow connectivity to  
external devices. It is advised to connect all the cables before installing fixed  
wall mounts.  
10 cm  
(4 inches)  
(Depending on model)  
Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.  
For more information of screws and wall mount bracket, refer to the Separate Purchase.  
If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product.  
When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.  
When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.  
When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and  
insects. (Depending on model)  
Stand hole  
(Depending on model)  
9
Wall Mounting Bracket  
(Depending upon model)  
Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the  
following table.  
A
B
Model  
43/50/55UP70*  
65UP70*  
400 x 300  
M6  
VESA (A x B) (mm)  
Standard screw  
300 x 300  
M6  
4
Number of screws  
Wall mount bracket (optional)  
4
Buy a suitable wall mount kit in the market by referring to this table for each model.  
Antenna/Cable  
Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF  
cable is optional.  
Make sure not to bend the copper wire of the RF cable.  
Copper wire  
Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.  
Use a signal splitter to use 2 TVs or more.  
DTV Audio Supported Codec: MPEG, Dolby Digital  
This TV cannot receive Ultra HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed.  
10  
Starting TV  
Turning on the TV  
You can simply operate the TV functions, using the button.  
Using button  
Power On (Press)  
1) All running apps will close.  
2) You can access and adjust the menu by pressing the button when TV is on.  
3) You can use the function when you access menu control.  
Power Off1) (Press and Hold)  
Menu Control (Press2))  
Menu Selection (Press and Hold3))  
When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take  
Note  
approximately one minute.  
Adjusting the menu  
When the TV is turned on, press the button one time. You can adjust the Menu items using the button.  
Turns the power off.  
Changes the input source.  
Adjusts the volume level.  
Scrolls through the saved channels.  
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.  
The available menus and options may differ from the input source or product model that you are using.  
New features may be added to this TV in the future.  
Note  
The device must be easily accessed to a location outlet near the access. Some devices are not made by turning on / off  
button, turning off the device and unplugging the power cord.  
11  
Inserting the battery  
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and  
ends to the label inside the compartment, and close the battery cover.  
Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak.  
Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient  
pollution.  
This apparatus uses batteries. In your community there might be regulations that require you to dispose of these batteries properly due  
to environmental considerations. Please contact your local authorities for disposal or recycling information.  
Batteries inside or inside the product shall not be exposed to excessive heat such as sunshine, fire or the like.  
12  
Using Remote Control  
Using Remote Control  
(Depending on model)  
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.  
Power Turns the TV on or off  
Number buttons Enters numbers.  
Dash Inserts a between numbers  
such as 2-1 and 2-2.  
Accesses the [Quick Help].  
More actions Displays more remote control  
functions.  
Accesses the saved channel list  
Displays the program event according  
to time scheduler.  
Mute Mutes all sounds.  
Shows information on the current  
program.  
Mute Accesses the [Accessibility] menu.  
Recalls your preferred subtitle in  
digital mode.  
Navigation button (up / down / left / right)  
Scrolls through menus or options.  
,
,
,
Enables SAP (Secondary Audio  
Program) Feature.  
Q. Settings Accesses the Quick Settings  
Back Returns to the previous screen  
Search Check for recommended content.  
(Some recommended services may not be  
available in some countries.)  
Accesses the [Edit Quick Access].  
1
1
1
1
- [Edit Quick Access] is a feature that  
allows you to enter a specified app  
or Live TV directly by pressing and  
holding the number buttons.  
Volume buttons Adjusts the volume  
level.  
Channel buttons Scrolls through the  
saved channels.  
Home Accesses the Home menu..  
Shows the search mode.  
You can watch TV or LG Channels.  
Clears on-screen displays and returns to last  
input viewing.  
Control buttons Control buttons for media  
contents.  
,
,
,
,
Home Launches the last used apps.  
Input Changes the input source.  
These access special functions in some menus.  
OK Selects menus or options and  
confirms your input.  
OK Accesses the [Magic Explorer].  
When using [TV Guide], [Settings],  
[Sports Alert], or [Art Gallery], press  
and hold down on the text.  
Starts to record. (Only Time MachineReady  
supported model)  
Streaming Service buttons Connects to the  
Video Streaming Service.  
1
(Some buttons and services may not be provided depending upon models or regions.)  
To use the button, press and hold for more than 1 second.  
Note  
13  
Connections  
Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection,  
refer to the manual provided with each device.  
When connecting the HDMI cable, the product and external devices should be turned off and unplugged.  
HDMI  
Supported HDMI Audio format (Depending on model):  
True HD (48 kHz),  
Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz),  
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)  
If the device connected to Input Port also supports HDMI Deep color, your picture may be clearer. However, if the  
device doesn’t support it, it may not work properly. In that case, connect the device to a different HDMI port or  
change the TV’s [HDMI Deep Color] setting to off.  
Note  
[General] [Devices] [HDMI Settings] [HDMI Deep Color]  
- On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)  
- Off: Support 4K @ 50/60 Hz (4:2:0)  
Use a certified cable with the HDMI logo attached.  
If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.  
Recommended HDMI cable types (3 m (9.84 feet) or less)  
- Ultra High Speed HDMI®/™ cable  
Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB  
port on the TV directly.  
USB  
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches)  
Note  
thick and 18 mm (0.7 inches) width.  
Use an extension cable that supports  
if the USB cable or USB flash drive does not fit into your TV’s USB  
port.  
B
<
* A 10 mm (0.39 inches)  
B
=
A
A
* B 18 mm (0.7 inches)  
=
14  
Supported external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage  
devices, PC, gaming devices, and other external devices.  
External  
Devices  
If you record a TV program on a Blu-ray/DVD recorder or VCR, make sure to connect the TV signal input  
cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual  
provided with the connected device.  
Note  
The external device connections shown may differ slightly from illustrations in a manual.  
Connect external devices to the TV regardless about the order of the TV port.  
If you connect a gaming device to the TV, use the cable supplied with the gaming device.  
Refer to the external equipment’s manual for operating instructions.  
In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If  
noise is present, change the PC output to another resolution, change the refresh rate to another rate or  
adjust the brightness and contrast on the [Picture] menu until the picture is clear. Depending upon the  
graphics card, some resolution settings may not allow the image to be positioned on the screen properly.  
Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it  
directly to the USB port on the TV.  
When connecting via a wired LAN, it is recommended to use a CAT 7 cable.  
The TV may be capable of operating without a set-top-box from a multichannel video programming  
distributor (MVPD).  
To obtain the RS-232C external control setup information, please visit www.lg.com. Download and read the  
manual, (Depending upon model).  
Remote  
RS-232C  
setup  
Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in  
injury or damage to the product.  
When connecting external devices such as video game consoles, make sure the connecting cables are long  
enough. Otherwise, the product may fall over, which may cause injury or damage the product.  
15  
Troubleshooting  
Cannot control the  
TV with the remote  
control.  
Check if anything such as tape has been placed over the receiver.  
Check if there is any obstacle between the product and the remote control.  
Replace the batteries with new fresh ones.  
No image display and  
no sound is produced.  
Check if the product is turned on.  
Check if the power cord is connected to a wall outlet.  
Check if there is a problem in the wall outlet by connecting other products.  
The TV turns off  
suddenly.  
Check the power control settings. The power supply may be interrupted.  
Check if the auto-off function is activated in the settings menu.  
If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.  
Abnormal Display  
Generated Sound  
If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is  
nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green,  
or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the screen or  
holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion  
effects on the screen.  
This panel is an advanced product that contains millions of pixels. In a very few cases, you could see fine  
dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the  
performance and reliability of the TV.  
Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic  
thermal contraction due to temperature and humidity. This noise is common for products where thermal  
deformation is required.  
Electrical circuit humming/panel buzzing A low level noise is generated from a high-speed switching circuit,  
which supplies a large amount of current to operate a product. It varies depending upon the product. This  
generated sound does not affect the performance and reliability of the product.  
When cleaning the product, be careful not to allow any liquid or foreign objects to  
enter the gap between the upper, left or right side of the panel and the guide panel,  
(Depending upon model).  
Make sure to wring any excess water or cleaner from the cloth.  
Do not spray water or cleaner directly onto the TV screen.  
Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.  
16  
Specifications  
Product specifications may be changed without prior notice due to upgrade of product functions.  
Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only).  
The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.).  
For information of the power supply and power consumption, refer to the label attached to the product.  
- The typical power consumption is measured in accordance with IEC 62087 or each country’s energy regulations.  
* On some models, the label is inside the external device connection terminal cover.  
* Depending upon the model or country, the typical power consumption may not be on label.  
Broadcasting Specifications  
Television system  
Program coverage  
ATSC / NTSC-M, 64 & 256 QAM  
VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, CADTV 1-135  
75 Ω  
External antenna impedance  
Wireless module(LGSBWAC03) Specifications  
Wireless LAN (IEEE 802.11a/b/g/n/ac)  
Frequency range  
Output Power (Max.)  
20 dBm  
2,400 to 2,483.5 MHz  
5,150 to 5,725 MHz  
5,725 to 5,850 MHz  
18.5 dBm  
18 dBm  
Bluetooth  
Frequency range  
Output power(Max.)  
9 dBm  
2,400 to 2,483.5 MHz  
As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional  
frequency table.  
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device and  
the body.  
FCC ID: BEJLGSBWAC03 / IC: 2703H-LGSBWAC03  
Environment condition  
Operating Temperature  
Operating Humidity  
Storage Temperature  
Storage Humidity  
0 °C to 40 °C (32 °F to 104 °F)  
Less than 80 %  
-20 °C to 60 °C (-4 °F to 140 °F)  
Less than 85 %  
17  
Open Source Software Notice Information  
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.  
com.  
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.  
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of  
media, shipping, and handling) upon email request to [email protected].  
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.  
Licenses  
(Magic Remote supported models only)  
18  
Regulatory  
-
-
-
-
19  
(1)  
(2)  
(3)  
(4)  
NOTE TO CABLE/TV INSTALLER  
(For USA and Canada)  
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides  
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as  
close to the point of the cable entry as practical.  
WARNING! (STABILITY HAZARD)  
A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions  
such as:  
- ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.  
- ALWAYS use furniture that can safely support the television set.  
- ALWAYS ensure the television set is not overhanging the edge of the supporting furniture.  
- ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls.  
- ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed.  
- NEVER place a television set in an unstable location.  
- NEVER place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television  
set to a suitable support.  
- NEVER place the television set on cloth or other materials that may be located between the television set and supporting furniture.  
- NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the  
television is placed.  
If the existing television set is going to be retained and relocated, the same considerations as above should be applied.  
20  
Symbols  
Refers to alternating current (AC).  
Refers to stand-by.  
Refers to direct current (DC).  
Refers to class II equipment.  
Refers to “ON”(power).  
Refers to dangerous voltage.  
21  
22  
CHILD SAFETY:  
PROPER TELEVISION PLACEMENT MATTERS  
THE CONSUMER TECHNOLOGY INDUSTRY CARES  
Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you  
enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the  
manufacturer’s recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests,  
carts, etc., may fall over, resulting in injury.  
TUNE IN TO SAFETY  
NEVER allow children to climb on or play on the television or the furniture on which the  
television is placed.  
NEVER place the television on furniture that can easily be used as steps, such as a chest of  
drawers.  
ALWAYS follow the manufacturer’s recommendations for the safe installation of your  
television.  
ALWAYS read and follow all instructions for proper use of your television.  
ALWAYS install the television where it cannot be pushed, pulled over or knocked down.  
ALWAYS route cords and cables connected to the television so that they cannot be tripped  
over, pulled or grabbed.  
WALL OR CEILING MOUNT YOUR TELEVISION  
ALWAYS contact your retailer about professional installation if you have any doubts about  
your ability to safely mount your television.  
ALWAYS use a mount that has been recommended by the television manufacturer and has a  
safety certification by a Nationally Recognized Testing Laboratory (NRTL).  
ALWAYS follow all instructions supplied by the television and mount manufacturers.  
ALWAYS make sure that the wall or ceiling where you are mounting the television is  
appropriate. Use proper anchoring systems for different wall or ceiling types (e.g. wood,  
concrete, metal, etc.). If you are unsure, contact a professional installer.  
Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount  
installation.  
MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME  
REMEMBER Special care should be made in the placement of older CRT/flat-panel televisions.  
Many new television buyers move their older CRT/flat-panel televisions into a secondary room  
after the purchase of a flat-panel television.  
NEVER place your older CRT/flat-panel television on a dresser where children may be tempted  
to use the drawers to climb.  
ALWAYS place your older CRT/flat-panel television on furniture that is sturdy and appropriate  
for its size and weight.  
ALWAYS make sure your older CRT/flat-panel television does not hang over the edge of your  
furniture.  
CTA.tech  
Supplier`s Declaration of Conformity  
Trade Name  
LG  
Responsible Party  
Address  
LG Electronics USA, Inc.  
111 Sylvan Avenue, North  
Building, Englewood Cliffs,  
NJ 07632  
E-mail  
LG Customer Information Center  
call;  
The model and serial number of the product are located  
on the back and on one side of the product. Record  
them below in case you ever need service.  
1-800-243-0000  
1-888-865-3026  
1-888-542-2623  
USA, Consumer User  
USA, Commercial User  
CANADA  
Register your product Online!  
Model  
Serial No.  

Xerox Phaser 340 User Manual
Whirlpool Ace184pt0 User Manual
Solio Mono User Manual
Omega Fl46300 User Manual
NEC MULTISYNC LT84 User Manual
KENWOOD KDC 361U User Manual
GARLAND SDG 1 User Manual
FUJITSU FI 7460 02 User Manual
EPSON DM D30 User Manual
EMERSON QUIET KOOL EAPC12RD1 User Manual