OwnEr’s ManUaL
LED LCD MOnITOr
(LED Monitor*)
* LG LED Monitor applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and
retain it for future reference.
32UL500
Copyright © 2018 LG Electronics Inc. all rights reserved.
NoTE
opEN SourCE SofTwarE NoTICE INforma-
TIoN
•
•
The components may look different from those illustrated here.
without prior notice, all product information and specifications contained in this manual are subject to change
to improve the performance of the product.
To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer
from which you purchased the product.
The power cord provided may differ depending upon the region.
•
•
To obtain the source code under GpL, LGpL, MpL, and other open source licenses, that is contained in this product,
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available
for download.
LG Electronics will also provide open source code to you on CD-rOM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping, and handling) upon email request to [email protected].
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in
Supported Drivers and Software
receipt of this information.
Drivers and Software
Monitor Driver
Installation priority
recommended
recommended
Optional
OnScreen Control
Dual Controller
aSSEmbLING aND prEparING
CauTIoN
•
•
•
•
•
•
Always use genuine LG components to ensure safety and product performance.
The product warranty will not cover damage or injury caused by the use of unauthorized components.
It is recommended that use the supplied components.
If you use generic cables not certified by LG, the screen may not display or there may be image noises.
Illustrations in this document represent typical procedures, so they may look different from the actual product.
Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing
so may damage the product.)
•
•
•
Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand
and could result in personal injury.
when lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen
may cause damage to it.
• for wave pattern on appearance, unlike the general method of coating, it’s applied to added glittering material
in raw material.with no peeled-off appearance, it has good durability. please use it with confidence because
there is no problem in using the product at all.
3
product and button Description
moving and Lifting the monitor
when moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or
damaged and to ensure safe transportation, regardless of its shape or size.
•
•
•
•
•
•
place the monitor in the original box or packing material before attempting to move it.
Before moving or lifting the monitor, disconnect the power cord and all other cables.
Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
when holding the monitor, the screen should face away from you to prevent it from being scratched.
when transporting the monitor, do not expose the monitor to shock or excessive vibration.
when moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.
Joystick button / power LED
How to use the Joystick button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right/up/
down with your finger.
basic functions
CauTIoN
press the joystick button once with your finger
to turn on the monitor.
power on
•
•
Avoid touching the monitor screen as much as possible.
- This may result in damage to the screen or some of the pixels used to create images.
If you use the monitor panel without the stand base, its joystick button may cause the monitor to become
unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick
button to malfunction.
press and hold the joystick button once more
than 5 seconds with your finger to turn off the
monitor.
power off
You can control the volume by moving the
joystick button left/right.
/
Volume control
NoTE
The joystick button is located at the bottom of the monitor.
•
4
Installing on aTable
adjusting the angle
•
Lift the monitor and place it on the table in an upright position. place the monitor at least 100 mm away from
the wall to ensure sufficient ventilation.
1
2
place the monitor mounted on the stand base in an upright position.
Adjust the angle of the screen.
The angle of the screen can be adjusted forward or backward from -5° to 15° for a comfortable viewing
experience.
warNING
100 mm
100 mm
•
•
To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as
illustrated below.
Be careful not to touch or press the screen area when adjusting the angle of the monitor.
100 mm
100 mm
CauTIoN
• unplug the power cord before moving or installing the monitor. There is risk of electric shock.
•
Make sure to use the power cord that is provided in the product package and connect it to a grounded power
outlet.
•
If you need another power cord, please contact your local dealer or the nearest retail store.
5
using the Kensington Lock
Installing the wall mount plate
The connector for the Kensington security system is located at the bottom of the monitor.
This monitor meets the specifications for the wall mount plate or other compatible devices.
for more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website
Connect the monitor to a table using the Kensington security system cable.
NoTE
•
The wall mount plate is sold separately.
• for more information on installation, refer to the wall mount plate’s installation guide.
•
Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the
screen.
• remove the stand before installing the monitor on a wall mount by performing the stand attachment in
reverse.
Installing on the wall
Install the monitor at least 100 mm away from the wall and leave about 100 mm of space at each side of the
monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail
store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.
100 mm
NoTE
•
The Kensington security system is optional. You can obtain optional accessories from most electronics stores.
100 mm
100 mm
100 mm
6
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
CauTIoN
• unplug the power cord before moving or installing the monitor to avoid electric shock.
•
Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead
to injury. use an authorized LG wall mount and contact the local dealer or qualified personnel.
Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
wall mount (mm)
100 x 100
M4 x L10
4
Standard screw
•
Number of screws
wall mount plate (optional)
LSw 149
• use the wall mounting bracket and screws that conform to VESA standards. Damage caused by the use or
misuse of inappropriate components will not be covered by the product warranty.
•
when measured from the back of the monitor, the length of each installed screw must be 8 mm or less.
wall Mount plate
Back of the Monitor
NoTE
•
A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable
for any accidents relating to the use of non-standard screws.
The wall mount kit includes the installation guide and all necessary parts.
wall Mount plate
•
•
•
Back of the Monitor
The wall mounting bracket is optional. You can obtain optional accessories from your local dealer.
The length of the screw may differ for each wall mounting bracket. If you use screws longer than the standard
length, it may damage the inside of the product.
• for more information, please refer to the user manual for the wall mounting bracket.
Standard screw:
M4 x L10
Max. 8 mm
7
Displayport Connection
Transmits digital video and audio signals from your pC to the monitor.
uSING THE moNITor
•
Illustrations in this manual may differ from the actual product.
NoTE
press the joystick button, go to Settings Input, and then select the input option.
•
•
There may be no video or audio output depending on the Dp (Displayport) version of the pC.
Make sure to use the supplied Displayport cable of the product. Otherwise, this may cause the device to
CauTIoN
malfunction.
•
•
Do not press the screen for a prolonged time. This may cause image distortion.
Do not display a still image on the screen for a prolonged time. This may cause image retention. use a pC
•
If you are using a Mini Displayport output graphics card, use a Mini Dp to Dp (Mini Displayport to Displayport)
cable or gender that supports Displayport1.4. (Sold separately)
screensaver if possible.
•
when connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power
outlet.
•
•
The monitor may flicker when turned on in an area where the temperature is low. This is normal.
Sometimes red, green, or blue spots may appear on the screen. This is normal.
Connecting to a pC
•
This monitor supports the *plug and play feature.
* plug and play: A feature that allows you to add a device to your computer without having to reconfigure
anything or install any manual drivers.
HDmI Connection
Transmits digital video and audio signals from your pC to the monitor.
CauTIoN
• using a DVI to HDMI / Dp (Displayport) to HDMI cable may cause compatibility issues.
• use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
• recommended HDMI cable types
- High-Speed HDMI®/TM cable
- High-Speed HDMI®/TM cable with Ethernet
8
Connecting aV Devices
HDmI Connection
HDMI transmits digital video and audio signals from your AV device to the monitor.
NoTE
• using a DVI to HDMI / Dp (Displayport) to HDMI cable may cause compatibility issues.
• use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
• recommended HDMI cable types
- High-Speed HDMI®/TM cable
- High-Speed HDMI®/TM cable with Ethernet
Connecting peripherals
Headphones Connection
Connect peripherals to the monitor via the headphones port.
NoTE
•
•
peripheral devices are sold separately.
Depending on the audio settings of the pC and external device, headphones and speaker functions may be
limited.
•
If you use angled earphones, it may cause a problem with connecting another external device to the monitor.
Therefore, it is recommended to use straight earphones.
Angled
Straight
(recommend)
9
uSEr SETTINGS
NoTE
•
Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.
activating the main menu
1
2
3
press the joystick button on the bottom of the monitor.
Move the joystick up/down and left/right to set the options.
press the joystick button once more to exit the main menu.
Joystick button
button
menu Status
Description
main menu disabled
Enables the main menu.
Exits the main menu.
main menu enabled
(Holding down the button more than 5 seconds to turn off the monitor. You can turn off the monitor this way at any time, including when the OSD is on.)
main menu disabled
Adjusts the monitor volume level.
Enters the Input features.
main menu enabled
main menu disabled
main menu enabled
main menu disabled
main menu enabled
main menu disabled
main menu enabled
Adjusts the monitor volume level.
Enters the Settings feature.
Displays the information on the current input.
Turns off the monitor.
Displays the information on the current input.
Enters the Game features.
10
main menu features
main menu
Description
Input
Sets input mode.
power off
power off
Settings
Game
Turns off the monitor.
Configures the screen settings.
Sets the game mode for gaming.
Exits the main menu.
Exit
Input
Settings
Exit
Game
menu Settings
1
2
3
4
To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Settings.
Move the joystick up/down and left/right to set the options.
To return to the upper menu or set other menu items, move the joystick to or pressing ( ) it.
If you want to exit the OSD menu, move the joystick to until you exit.
Quick Settings
Input
picture
General
11
Quick Settings
Settings > Quick Settings
brightness
Description
Adjusts the color contrast and brightness of the screen.
Contrast
Adjusts the volume level.
Volume
NoTE
•
You can adjust mute / unmute by moving the joystick button to in the Volume menu.
The user can adjust it to red, green, or blue by customization.
Sets the screen color to a reddish tone.
Custom
warm
medium
Cool
Sets the screen color between a red and blue tone.
Sets the screen color to a bluish tone.
ColorTemp
manual
The user can fine-tune the color temperature.
Input
Settings > Input
Description
Input List
Selects the input mode.
Adjusts the aspect ratio of the screen.
full wide
original
1:1
Displays the video in widescreen, regardless of the video signal input.
Displays video according to the aspect ratio of the video signal input.
The aspect ratio is not adjusted from the original.
aspect ratio
NoTE
•
•
The display may look the same for full wide , Original, and 1:1 options at the recommended resolution (3840 x 2160).
There is no 1:1 menu on freeSync Mode. ( Go to picture → Game Adjust → freeSync, to set from freeSync Basic or Extended to Off)
12
picture
NoTE
•
The picture mode that can be set depends on the Input signal.
[picture mode on SDr (Non-HDr) signal]
Settings > picture
Description
Custom
Allows the user to adjust each element. The color mode of the main menu can be adjusted.
reader
Optimizes the screen for viewing documents. You can brighten the screen in the OSD menu.
photo
Optimizes the screen for photos.
Cinema
HDr Effect
Optimizes the screen for video.
Optimizes the screen for high dynamic range.
Dark room 1
Dark room 2
Color weakness
This mode adjusts the brightness to the optimal level for working in a dark environment.
This mode sets the brightness to a lower level than Dark room 1.
This mode is for users who cannot distinguish between red and green. It enables users with color weakness to easily distinguish
between the two colors.
fpS Game 1
fpS Game 2
rTS Game
This mode is optimized for fpS games.
picture mode
It has a higher Black Stabilizer value than fpS Game 1. It is suitable for very dark fpS games.
This mode is optimized for rTS Game.
Custom (Game)
In this mode, users can customize various elements including game-related options.
Ebu
A standard TV pAL color space for broadcasting.
A standard HDTV color space for broadcasting.
A standard TV NTSC color space for broadcasting.
rEC709
SmpTE-C
NoTE
•
If the picture mode is changed, the screen may flicker or the resolution of your pC screen may be affected.
13
[picture mode on HDr signal]
Settings > picture
Description
Optimized the screen for HDr vivid colors.
HDr Vivid
HDr Standard
HDr Game
Optimized the screen for HDr.
Optimized the screen for HDr Games.
Optimized the screen for HDr video.
HDr Cinema
picture mode
NoTE
•
•
•
HDr content may not be operated properly depending on the windows10 OS setting. please check the HDr On / Off setting of windows.
when the HDr function is turned on, the characters or picture quality may be poor according to Graphic card performance.
while the HDr function is on, screen flickering or cracking may occur when changing the monitor input or power on/off according to Graphic card performance.
14
Settings > picture
Description
Adjusts the brightness of the screen.
brightness
Contrast
Adjusts the contrast of the screen.
Sharpness
Adjusts the sharpness of the screen.
Optimized picture quality is displayed when a user wants crystal clear images. It is effective for high quality
video or game.
High
The optimized picture quality is displayed when a user wants images between low and high modes for
comfortable viewing. It is effective for uCC or SD video.
middle
The optimized picture quality is displayed when a user wants smooth and natural images. It is effective for
slow-moving pictures or still images.
Low
SupEr rESoLuTIoN+
picture adjust
off
Select this option for everyday viewing. SupEr rESoLuTIoN+ is turned off in this mode.
NoTE
•
Because this is a function to increase the sharpness of low resolution pictures, it is not recommended to use the function for
normal text or for desktop icons. Doing so may result in unnecessarily high sharpness.
Sets the offset level (for HDMI only).
Offset: as a reference for a video signal, this is the darkest color the monitor can display.
•
black Level
High
Keeps the current contrast ratio of the screen.
Low
Lowers the black levels and raises the white levels from the current contrast ratio of the screen.
15
Settings > picture
Description
provides sharper images when connected to a device supporting uLTrA HD Deep Color.
4K@60 Hz Support format (HDmI uLTra HD Deep Color on)
Color Depth / Chroma Sampling
8 bit 10 bit
resolution
frame rate (Hz)
YCbCr 4:2:0
YCbCr 4:2:2
59.94
60.00
3840 x 2160
YCbCr 4:4:4
-
-
rGB
4K@30 Hz Support format (HDmI uLTra HD Deep Color off)
HDmI uLTra HD Deep Color
Color Depth / Chroma Sampling
8 bit 10 bit
resolution
frame rate (Hz)
picture adjust
YCbCr 4:2:2
29.97
30.00
3840 x 2160
YCbCr 4:4:4
-
-
rGB
NoTE
•
•
•
•
If the connected device does not support uLTrA HD Deep Color, the feature may not work properly.
If a problem occurs, set the HDMI uLTrA HD Deep Color option to Off.
HDMI uLTrA HD Deep Color option must be set for each HDMI port (HDMI IN 1, HDMI IN 2) separately.
HDMI uLTrA HD Deep Color option can be changed with SET OSD Menu.
(Settings - picture - picture Adjust - HDMI uLTrA HD Deep Color Off / On)
on
Adjusts the brightness automatically according to the screen.
DfC
off
Disables the DfC feature.
16
Settings > picture
Description
Sets a response time for displayed pictures based on the speed of the screen.
for a normal environment, it is recommended that you use fast.
for a fast-moving picture, it is recommended that you use faster.
Setting to faster may cause image sticking.
response Time
faster
fast
Sets the response time to faster.
Sets the response time to fast.
Normal
off
Sets the response time to normal.
Does not use the response time improvement feature.
provides seamless and natural images by synchronizing the vertical frequency of the input signal with that of the output signal.
CauTIoN
Game adjust
•
•
•
Supported Interface: Displayport,HDMI.
Supported Graphic Card : A graphic card that supports AMD’s freeSync is necessary.
Supported Version : Make sure to update the graphic card to the latest driver.
freeSync
• for more information and requirement, refer to AMD website at http://www.amd.com/freeSync
Extended
Enable wider frequency range of freeSync function than basic mode.
The screen may flicker during the game play.
basic
Enable basic frequency range of freeSync function.
off
freeSync function off.
You can control the black contrast to have better visibility in dark scenes.
Increasing the black Stabilizer value brightens the low gray level area on the screen. (You can easily distinguish objects on dark
game screens.)
black Stabilizer
reducing the black Stabilizer value darkens the low gray level area and increases the dynamic contrast on the screen.
17
Settings > picture
Description
The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma
value, the lighter the image becomes.
mode 1, mode 2, mode 3
Gamma
If you do not need to adjust the gamma settings, select Mode 4.
The user can adjust it to red, green, or blue by customization.
Sets the screen color to a reddish tone.
mode 4
Custom
warm
Sets the screen color between a red and blue tone.
Sets the screen color to a bluish tone.
ColorTemp
medium
Cool
The user can fine-tune the color temperature.
manual
Color adjust
red
Green
blue
You can customize the picture color using red, Green, and blue colors.
Meets the user requirements for colors through adjusting the color and saturation of the six colors(red_Hue, red_Saturation,
Green_Hue, Green_Saturation, blue_Hue, blue_Saturation, Cyan_Hue, Cyan_Saturation, magenta_Hue, magenta_
Saturation, Yellow_Hue, Yellow_Saturation) and saving the settings.
Six Color
Adjusts the tone of the screen colors.
Hue
Adjusts the saturation of the screen colors. The lower the value, the less saturated and brighter the
colors become. The higher the value, the more saturated and darker the colors become.
Saturation
Do you want to reset your picture settings?
picture reset
No
Cancel the select.
Yes
returns to the default settings.
18
General
Settings > General
Language
Description
sets the menu screen to the desired language.
High
saves energy using the high-efficiency sMarT Energy saving feature.
Low
saves energy using the low-efficiency sMarT Energy saving feature.
off
Disables the sMarT Energy saving feature.
SmarT ENErGY SaVING
NoTE
• saving Data depends on the Panel. so, these values may be different from each panel and/or panel vendor. If the sMarT EnErGY saVInG option is High or Low, monitor luminance
become higher or lower depending on the source.
Turns the power LED on the bottom of the monitor on or off.
power LED
on
The power LED turns on automatically.
The power LED turns off.
off
automatic Standby
feature that automatically turns off the monitor when there is no movement on the screen for a period of time. You can set a timer for the auto-off function. (Off, 4 H, 6 H, and 8 H)
Enables or disables DisplayPort 1.2.
Displayport 1.2
NoTE
•
Be sure to configure this option according to the DisplayPort version supported by your graphics card. set this option to Disable if your graphics card does not support DisplayPort 1.2.
This feature lets you set the sound generated from Buzzer when your monitor powers on.
on
Enables your monitor's buzzer.
buzzer
off
Disables your monitor's buzzer.
19
Settings > General
Description
oSD Lock
This feature disables the configuration and adjustment of menus.
on
Enables OsD Lock.
Disables OsD Lock.
off
NoTE
• all features are disabled except Brightness, Contrast, Volume, Input List, aspect ratio, OsD Lock and Information.
oSD Size
Information
reset
User can select OsD size to Large or small.
The display information will be shown the Model, serial number, Total Power On Time, resolution.
Do you want to reset your settings?
No
Cancel the select.
Yes
returns to the default settings.
20
TroubLESHooTING
Nothing is displayed on the screen.
Is the monitor's power cord plugged in?
Is the power LED on?
•
•
•
Check if the power cord is correctly plugged into the power outlet.
Check the power cable connection and press the power button.
Check that the connected input is enabled (Settings > Input).
Is the power on and the power LED displaying white?
Does the No Signal message appear or is the screen not
displayed?
•
•
This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it.
If the screen is not displayed after reconnecting the signal cable, set as below.
- HDMI Input: set HDmI uLTra HD Deep Color to off in the monitor's General settings.
Is the out of range message being displayed?
•
This occurs when signals transferred from the PC (graphics card) are out of the horizontal or vertical frequency range of the monitor. Please see the Product
specification section of this manual to set the appropriate frequency.
Screen display is unstable and shaky. / Images displayed on the monitor leave shadow trails.
Did you select the appropriate resolution?
•
If the selected resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may be flickering. Change the resolution to 1080p or the recommended resolution.
• not setting the graphics card to the recommended (optimal) resolution may result in blurred text, a dimmed screen, a truncated display area or misalignment of the
display.
•
The setting methods may be different depending on the computer or operating system, and some resolutions may not be available depending on the performance of
the graphics card. If this is the case, contact the manufacturer of the computer or graphics card for assistance.
Does image sticking occur even when the monitor is
turned off?
•
•
Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image.
To extend the lifetime of the monitor, use a screensaver.
are there spots on the screen?
• when using the monitor, pixilated spots (red, green, blue, white, or black) may appear on the screen. This is normal for an LCD screen. It is not an error, nor is it related
to the monitor's performance.
21
Some features are disabled.
are some functions not available when you press the
•
The OsD is locked. Disable oSD Lock in General.
Menu button?
Do you see an "unrecognized monitor, plug and play (VESa DDC) monitor found" message?
Have you installed the display driver?
•
•
Make sure to check if the graphics card supports Plug and Play function.
No sound from the headphone port.
are images displayed without sound?
•
•
Make sure that the headphone port connections are made properly.
Try increasing the volume with the joystick.
• set the audio output of the PC to the monitor you are using. (The settings may differ depending on the operating system (Os) you use.)
22
proDuCT SpECIfICaTIoN
Color Depth
8-bit / 10-bit color is supported.
Max resolution
3840 x 2160 @ 60 Hz
3840 x 2160 @ 60 Hz
resolution
recommended resolution
Power rating
19 V
3.3 a
On mode: 50 wTyp. (Outgoing condition)**
sleep Mode ≤ 0.5 w
power Sources
Power Consumption
Off Mode ≤ 0.3 w
Type Da-65G19, asian Power Devices Inc. production
aC/DC adaptor
Or type LCaP39, LIEn CHanG ELECTrOnIC EnTErPrIsE production
Output: 19 V 3.42 a
Operating Conditions
Temperature
Humidity
0 °C to 40 °C
Less than 80 %
-20 °C to 60 °C
Less than 85 %
Environmental Conditions
storing Conditions
Temperature
Humidity
Monitor size (width x Height x Depth)
with stand
Dimensions
728.1 x 518.2 x 208.8 (mm)
728.1 x 424.6 x 49.9 (mm)
6.2 kg
without stand
with stand
weight (without packaging)
without stand
5.3 kg
specifications are subject to change without notice.
* The power consumption level can be different by operating condition and monitor setting.
** The On mode power consumption is measured with LGE test standard (full white pattern,Maximum resolution).
23
factory Support mode (preset mode, pC)
HDmI
Display modes (resolution)
Horizontal frequency(kHz)
Vertical frequency(Hz)
polarity(H/V)
remarks
640 x 480
800 x 600
1024 x 768
1152 x 864
31.469
37.879
48.363
54.347
59.94
60.317
60
-/-
+/+
-/-
60.05
+/+
1280 x 720
1280 x 800
1280 x 1024
1600 x 900
1920 x 1080
45
60
+/+
-/+
49.702
63.981
60
59.810
60.02
60
+/+
+/+
+/-
67.5
60
2560 x 1440
3840 x 2160
88.79
67.5
59.95
30
+/-
+/-
when HDMI ULTra HD Deep Color is set
to On
3840 x 2160
135
60
+/-
24
Displayport
Display modes (resolution)
Horizontal frequency(kHz)
Vertical frequency(Hz)
polarity(H/V)
remarks
640 x 480
800 x 600
1024 x 768
1152 x 864
31.469
37.879
48.363
54.347
59.94
60.317
60
-/-
+/+
-/-
60.05
+/+
1280 x 720
1280 x 800
1280 x 1024
1600 x 900
45
60
+/+
-/+
49.702
63.981
60
59.810
60.02
60
+/+
+/+
1920 x 1080
2560 x 1440
3840 x 2160
3840 x 2160
67.5
60
+/-
+/-
+/-
+/-
88.79
66.66
133.32
59.95
30
60
25
HDmI Timing (Video)
factory support mode(preset mode)
Horizontal frequency(kHz)
Vertical frequency(Hz)
remarks
480p
720p
31.5
45.0
60
60
1080p
2160p
67.5
135
60
60
when HDMI ULTra HD Deep Color is set to On
power LED
mode
LED Color
On Mode
white (for a few seconds)
sleep Mode
Off
Off Mode
Off
26
The model and serial number of the product are located on the back and on one side of the product.
record them below in case you ever need service.
Model
serial no.
|