담
당
관 리 자
User’s Guide Specification
KANG
KWANG SUK
07.06.29
Park SY
07.06.29
1. Model Description
32/37/42LC7D-UK
42/50PC5D-UL
MODEL
SUFFIX
LG
BRAND
Part No. MFL34797033
(0807-REV04)
32/37/42LC7D,
42/50PC5D
USA
Product Name
2. Printing Specification
1. Trim Size (Format) : 185mm x 260 mm
2. Printing Colors
• Cover : 1 COLOR (BLACK)
• Inside : 1 COLOR (BLACK)
3. Stock (Paper)
• Cover : Coated paper , S/White 150 g/㎡
• Inside : Uncoated paper , 백상지60 g/㎡
4. Printing Method : Off set
5. Bindery : Saddle stitch
6. Language : English (1)
7. Number of pages : 32
“This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specification.
(1)Eco-hazardous substances test report should be submitted
N
O
T
E
S
when Part certification test and First Mass Production.
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
3. Special Instructions
(1) Origin Notification
* LGEMX : Printed in Mexico
* LGERS : Printed in Mexico
* LGEAZ : Printed in Brazil
* LGESP : Printed in Brazil
* LGESY : Printed in China
* LGENT : Printed in China
* LGENP : Printed in China
* LGEIL : Printed in India
* LGEDI : Printed in Indonesia * LGERA : Printed in Russia
* LGEIN : Printed in Indonesia * LGEAK : Printed in Kazakhstan
* LGEMA : Printed in Poland * LGETH : Printed in Thailand
* LGEWA : Printed in U.K.
* LGEEG : Printed in Egypt
* LGEVN : Printed in Vietnam
4.
Changes
9
8
7
6
5
4
3
Added the model name and corrected the safety instruchions
Jul./01/08 Yang Hyo-Mi S8-24394
Jan./09/07 Park sun young S8-05245
Changed inch form.
Changed antenna contents and Simplink function.
Applied PQ test results.
2
1
Nov./01/07 Park sun young S7-97591
Sep./14/07 Park sun young S7-95015
REV.
NO.
MM/DD/YY
CHANGE NO.
CHANGE CONTENTS
SIGNATURE
MFL34797033-en-simple 1/20/04 12:34 AM Page 1
LCD TV PLASMA TV
OWNER’S MANUAL
LCD TV MODELS
PLASMA TV MODELS
32LC7D
32LC7DC
37LC7D
42LC7D
32LG10
42PC5D
42PC5DC
50PC5D
50PC5DC
Please read this manual carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer
when you require service.
ENERGY STAR is a set of power-saving
guidelines issued by the U.S.
Environmental Protection Agency(EPA).
An extended owner’s manual that contains information
on the advanced features of these LG TV sets is located
on the CD-ROM provided in an electronic version.
To read these files, you will need to use personal computer
(PC) equipped with a CD-ROM drive.
As an ENERGY STAR
Partner LGE U. S. A.,Inc.
has determined that this
product meets the
ENERGY STAR guidelines
for energy efficiency.
P/NO : MFL34797033 (0807-REV04)
Printed in Korea
MFL34797033-en-simple 1/20/04 12:34 AM Page 2
WARNING / CAUTION
WARNING / CAUTION
To prevent fire or shock hazards, do not expose
this product to rain or moisture.
FCC NOTICE
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.
Class B digital device
This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not
occur in a particular installation. If this equipment
does cause harmful interference to radio or televi-
sion reception, which can be determined by turning
the equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and main-
tenance (servicing) instructions in the literature
accompanying the appliance.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment to an outlet on a circuit
different from that to which the receiver is con-
nected.
WARNING/CAUTION
- Consult the dealer or an experienced radio/TV
technician for help.
TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
Any changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding sys-
tem of the building, as close to the point of the cable
entry as practical.
CAUTION
Do not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user’s
authority to operate this product
2
MFL34797033-en-simple 1/20/04 12:34 AM Page 3
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus com-
bination to avoid injury from tip-over.
Do not use this apparatus near water.
1
8
Clean only with dry cloth.
2
Unplug this apparatus during lighting storms
or when unused for long periods of time.
9
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
3
4
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-
supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
10
Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers)that produce heat.
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a
third grounding prong, The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
5
Never touch this apparatus or antenna during
a thunder or lighting storm.
11
12
When mounting a TV on the wall, make sure
not to install the TV by the hanging power and
signal cables on the back of the TV.
Do not allow an impact shock or any objects to
fall into the product, and do not drop onto the
screen with something.
13
14
Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
6
7
CAUTION concerning the Power Cord:
It is recommend that appliances be placed
upon a dedicated circuit; that is, a single
outlet circuit which powers only that appliance
and has no additional outlets or branch
circuits. Check the specification page of this
owner's manual to be certain.
Do not connect too many appliances to the
same AC power outlet as this could result in
fire or electric shock.
Only use attachments/accessories specified by
the manufacturer.
3
MFL34797033-en-simple 1/20/04 12:34 AM Page 4
SAFETY INSTRUCTIONS
Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or
cracked wire insulation are dangerous. Any of
these conditions could result in electric shock
or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced with
an exact replacement part by an authorized
servicer. Protect the power cord from physical
or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the
appliance.
ANTENNAS
Outdoor antenna grounding
20
If an outdoor antenna is installed, follow the
precautions below. An outdoor antenna system
should not be located in the vicinity of over-
head power lines or other electric light or
power circuits, or where it can come in contact
with such power lines or circuits as death or
serious injury can occur.
Be sure the antenna system is grounded so as
to provide some protection against voltage
surges and built-up static charges.
Section 810 of the National Electrical Code
(NEC) in the U.S.A. provides information with
respect to proper grounding of the mast and
supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of
grounding conductors, location of antenna dis-
charge unit, connection to grounding electrodes
and requirements for the grounding electrode.
Do not make the TV with the power cord
plugged in. Do not use a damaged or loose
power cord. Be sure do grasp the plug when
unplugging the power cord. Do not pull on the
power cord to unplug the TV.
Antenna grounding according to the
National Electrical Code, ANSI/NFPA 70
Ground Clamp
Antenna Lead in Wire
WARNING - To reduce the risk of fire or elec-
trical shock, do not expose this product to rain,
15
Antenna Discharge Unit
(NEC Section 810-20)
moisture or other liquids. Do not touch the TV
with wet hands. Do not install this product near
flammable objects such as gasoline or candles
or expose the TV to direct air conditioning.
Grounding Conductors
(NEC Section 810-21)
Electric Service
Equipment
Ground Clamps
Power Service Grounding
Electrode System (NEC
Art 250, Part H)
NEC: National Electrical Code
Cleaning
21
When cleaning, unplug the power cord and
scrub gently with a soft cloth to prevent
scratching. Do not spray water or other liquids
directly on the TV as electric shock may occur.
Do not clean with chemicals such as alcohol,
thinners or benzene.
Do not expose to dripping or splashing and do
16
17
not place objects filled with liquids, such as
vases, cups, etc. on or over the apparatus (e.g.
on shelves above the unit).
Moving
22
23
Make sure the product is turned off,
unplugged and all cables have been removed. It
may take 2 or more people to carry larger TVs.
Do not press against or put stress on the front
panel of the TV.
GROUNDING
Ensure that you connect the earth ground wire
to prevent possible electric shock (i.e. a TV
with a three-prong grounded AC plug must be
connected to a three-prong grounded AC out-
let). If grounding methods are not possible,
have a qualified electrician install a separate
circuit breaker.
Ventilation
Install your TV where there is proper ventila-
tion. Do not install in a confined space such as
a bookcase. Do not cover the product with
cloth or other materials (e.g.) plastic while
plugged in. Do not install in excessively dusty
places.
Do not try to ground the unit by connecting it
to telephone wires, lightening rods, or gas pipes.
Power
Supply
If you smell smoke or other odors coming from
the TV or hear strange sounds, unplug the
power cord contact an authorized service center.
24
Short-circuit
Breaker
DISCONNECTING DEVICE FROM MAINS
Mains plug is the disconnecting device. The
plug must remain readily operable.
18
19
On Disposal (Only Hg lamp used LCD TV)
The fluorescent lamp used in this product contains a
small amount of mercury. Do not dispose of this
product with general household waste. Disposal of
this product must be carried out in accordance to the
regulations of your local authority.
Keep the product away from direct sunlight.
4
MFL34797033-en-simple 1/20/04 12:34 AM Page 5
CONTENTS
VCR Setup
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
20
WARNING / CAUTION
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
3
PC Setup
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SAFETY INSTRUCTIONS
. . . . . . . . . . . . . . . . . . . . . . . . . .
WATCHING TV
PREPARATION
Turning On TV
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21
21
21
22
23
Channel Selection
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessories
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
Volume Adjustment
Front Panel Information
Back Panel Information
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Channel Search
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
10
12
14
14
15
15
16
On-Screen Menus Selection
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote Control Functions
Back Cover for Wire Arrangement
Attaching the TV to a wall
Desktop Pedestal Installation
Stand Installation
VESA Wall Mounting
Antenna or Cable Connection
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
APPENDIX
Troubleshooting
Maintenance
Product Specifications
Open Source Software Notice
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
26
28
29
30
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup
DVD Setup
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
18
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HOW TO USE THE OWNER'S MANUAL ON THE CD-ROM
To view the Owner's Manual on the CD-ROM, Adobe Acrobat Reader must be installed on your PC.
The “ACRORD" folder on the CD-ROM contains the installation programs for them.
If you want to install those programs, Open the “My Computer” Open the “LG” Open the
“ACRORD” double-click your language.
TO VIEW THE OWNER'S MANUAL ON THE CD-ROM
The Owner's Manual files are included in the supplied CD-ROM.
Load the supplied CD-ROM into the CD-ROM drive of your PC.
After a while, the web page of the CD-ROM will open automatically. (for Window only)
When you select your product,
display the PDF file.
You can find the desired contents
easily using the bookmark.
G If the web page does not appear automatically, open the Owner's Manual file directly.
Open the “My computer” Open the “LG” Open the “index.htm” file.
!
NOTE
5
MFL34797033-en-simple 1/20/04 12:34 AM Page 6
PREPARATION
ACCESSORIES
Ensure that the following accessories are included with your product. If an accessory is missing, please con-
tact the dealer where you purchased the product.
User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard
compliance for the product.
The accessories can be different from the figures shown here.
For further information, see the the Owner's Manual files supplied CD-ROM.
A
U
D
IO
B
R
IG
H
T
-
1.5V 1.5V
Copyright© 2007 LGE,
All Rights Reserved.
Owner’s Manual
CD Manual
(Refer to p.5)
Remote Control,
Batteries
Power Cord
* Slightly wipe stained spot on the exterior only with the polishing
cloth for the product exterior if there is stain or fingerprint on
surface of the exterior.
75ohm Round Cable
(This feature is not available for
all models)
* Do not wipe roughly when removing stain. Please be cautions of
that excessive pressure may cause scratch or discoloration.
Polishing Cloth
For Plasma TV models
Option Extras
This feature is not available for all models
2-Eye-bolts
(Refer to p.14)
2-Wall brackets
(Refer to p.14)
D-sub 15 pin Cable
For LCD TV models
32LC7D/7DC, 37LC7D,
32LG10 only
This feature is not available for all models
2- TV Bracket Bolts 2- TV Brackets,
Cable
Management
Twist Holder
Arrange the wires with
the twist holder.
4-Bolts for stand assembly
(Refer to p.15)
(Refer to p.14)
2- Wall Brackets
(Refer to p.14)
6
MFL34797033-en-simple 1/20/04 12:34 AM Page 7
FRONT PANEL INFORMATION
I
Here shown may be somewhat different from your TV.
I
NOTE: If your product has a protection tape attached, remove the tape.
And then wipe the product with a cloth (If a polishing cloth is included with your product, use it).
Front Panel Controls
Plasma TV Model
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates green when the set is switched on.
Remote Control Sensor
INPUT
MENU
ENTER
VOL
CH
INPUT
Button
MENU
Button
POWER
Button
ENTER
Button
VOLUME
(F,G)Buttons
CHANNEL
(E,D)Buttons
LCD TV Model
CH
CHANNEL(
D,E)Buttons
VOL
VOLUME(F,G)Buttons
ENTER Button
MENU Button
ENTER
MENU
Remote Control Sensor
INPUT
INPUT Button
POWER Button
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates green when the set is switched on.
7
MFL34797033-en-simple 1/20/04 12:34 AM Page 8
PREPARATION
BACK PANEL INFORMATION
I
Here shown may be somewhat different from your TV.
Plasma TV Model
AV IN 2
10
11
ANTENNA/
CABLE IN
6
3
5
4
RGB IN
AUDIO
REMOTE
DIGITAL AUDIO OUT
OPTICAL
RGB(PC)
1
SERVICE
(RGB/DVI)
CONTROL IN
7
8
HDMI IN
RS-232C IN
(CONTROL & SERVICE)
COMPONENT IN
9
2
1
2
1
AUDIO OUT
10
(
)
MONO
AUDIO
AUDIO
VIDEO
VIDEO
HDMI/DVI IN
2
LCD TV Model
S-VIDEO
10
11
AV IN 2
6
ANTENNA/
CABLE IN
3
5
1
4
RGB IN
DIGITAL
AUDIO OUT
AUDIO
REMOTE
HDMI IN
RGB(PC)
SERVICE
OPTICAL
(RGB/DVI)
CONTROL IN
7
8
RS-232C IN
(CONTROL & SERVICE)
COMPONENT IN
9
2
1
2
AUDIO OUT
10
1
(
)
MONO
AUDIO
AUDIO
VIDEO
S-VIDEO
VIDEO
HDMI/DVI IN
2
8
MFL34797033-en-simple 1/20/04 12:34 AM Page 9
1
HDMI/DVI IN 1, HDMI IN 2
Connect a HDMI (DVI) connection to either input.
10 AV (Audio/Video) IN
Connect audio/video output from an external
device to these jacks.
S-VIDEO
2
COMPONENT IN
Connect a component video/audio device to these
jacks.
Connect S-Video out from an S-VIDEO device.
Power Cord Socket
For operation with AC power.
Caution: Never attempt to operate the TV on DC
power.
11
3
RGB (PC)
Connect the output from a PC.
AUDIO (RGB/DVI)
Connect the audio from a PC or DTV.
4
SERVICE
5
Remote Control Port
Connect a wired remote control.
6
ANTENNA/CABLE IN
Connect over-the air signals to this jack.
Connect cable signals to this jack.
DIGITAL AUDIO OUT
Connect digital audio from various types of equipment.
Note: In standby mode, these ports do not work.
7
RS-232C IN (CONTROL & SERVICE) PORT
For external control devices.
8
9
AUDIO OUT
Connect analog audio to various types of equipment.
9
MFL34797033-en-simple 1/20/04 12:34 AM Page 10
PREPARATION
REMOTE CONTROL FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
INPUT
TV INPUT
Select the remote’s operating mode. TV, DVD, VCR,
AUDIO, CABLE, or STB.
MODE
POWER
DVD
MODE
CABLE
VCR/DVD
control buttons
Control video cassette recorders or DVD players.
UDIO
A
Displays the main menu.
MENU
Adjust the brightness on screen.
BRIGHT -/ +
MENU
BRIGHT -
THUMBSTICK
(Up/Down/Left
Right/ENTER)
Navigate the on-screen menus and adjust the system set-
tings to your preference.
ENTER
EXIT Clear all on-screen displays and return to TV viewing
from any menu.
TIMER Select the amount of time before your TV turns off auto-
matically.
RATIO Change the aspect ratio.
MUTE
FAV
VOL
CH
See a list of AV devices connected to TV. When you tog-
gle this button, the SimpLink menu appears at the screen.
SIMPLINK
1
2
3
VOLUME UP
/DOWN
Increase/decrease the sound level.
Switch the sound on or off.
4
7
5
8
0
6
9
MUTE
FAV
Scroll through the programmed Favorite channels.
Select available channels.
BACK
CHANNEL
UP/DOWN
NUMBER button
— (DASH)
Used to enter a program number for multiple program
channels such as 2-1, 2-2, etc.
BACK
Tune to the last channel viewed.
10
MFL34797033-en-simple 1/20/04 12:34 AM Page 11
POWER Turns your TV or any other programmed equipment on or off, depending on the mode.
TV INPUT In AV 1-2, Component 1-2, RGB-PC, HDMI1, and HDMI2 input sources, screen returns to the
last TV channel.
INPUT
External input modes rotate in regular sequence: TV, AV1-2, Component 1-2, RGB-PC, HDMI1 and
HDMI2.
(AV 1-2, Component 1-2, RGB-PC, HDMI1, and HDMI2 input sources are linked automatically,
only if a device is connected.)
Inside the Sliding Cover
Selects the factory preset picture depend on
the viewing environment.
PICTURE
SOUND
SAP
1
4
7
2
3
6
Selects the factory preset sound for type of
program.
5
8
0
Analog mode: Selects MTS sound (Mono,
Stereo, or a SAP)
9
DTV mode: Changes the audio language.
BACK
CC
Select a closed caption.
PICTURE
ADJUST
SOUND
SAP
CC
Adjust the screen resolution, position, size and
phase.
ADJUST
Installing Batteries
Remote control effective range
TV INPUT
INPUT
POWER
TV INPUT
INPUT
DVD
MODE
CABLE
POWER
O
DVD
MODE
CABLE
AUDI
IO
AUD
-
MENU
HT
IG
BR
I
-
MENU
HT
IG
BR
Open the battery compartment cover on the back
side and install the batteries matching correct
I
I
Use a remote control up to 7 meters distance
and 30 degree (left/right) within the receiving
unit scope.
(
polarity + with +, - with - .
)
I
I
Install two 1.5V AA batteries. Don’t mix old or
used batteries with new ones.
Dispose of used batteries in a recycle bin to
preserve environment.
Close cover.
11
MFL34797033-en-simple 1/20/04 12:34 AM Page 12
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
I
Here shown may be somewhat different from your TV.
Plasma TV Model
Hold the CABLE MANAGEMENT with both hands and pull it backward as shown.
1
CABLE MANAGEMENT
Connect the cables as necessary.
2
To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section.
Install the CABLE MANAGEMENT as shown.
3
12
MFL34797033-en-simple 1/20/04 12:34 AM Page 13
LCD TV Model
Connect the cables as necessary.
1
To connect an additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
Install the CABLE MANAGEMENT as shown.
2
CABLE MANAGEMENT
Bundle the cables using the supplied TWISTER HOLDER.
(This feature is not available for all models.)
3
!
NOTE
G Do not hold the CABLE MANAGEMENT when moving
the product.
TWISTER HOLDER
- If the product is dropped, you may be injured or the
product may be broken.
How to remove the CABLE MANAGEMENT
G Hold the CABLE MANAGEMENT with both hands and
pull it backward.
13
MFL34797033-en-simple 1/20/04 12:34 AM Page 14
PREPARATION
ATTACHING THE TV TO A WALL
I
This feature is not available for all models.
Here shown may be somewhat different from your TV.
I
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,
potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.
Plasma TV Model
LCD TV Model
I
Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.
*If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) to
the wall. Match the height of the bracket that is mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
I
Use a sturdy rope (not provided as parts of the product, must pur-
chase separately) to tie the product. It is safer to tie the rope so it
becomes horizontal between the wall and the product.
DESKTOP PEDESTAL INSTALLATION
For proper ventilation, allow a clearance of 4inches on all four sides from the wall.
Plasma TV Model
LCD TV Model
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
G Ensure adequate ventilation by following the clearance recommendations.
CAUTION
14
MFL34797033-en-simple 1/1/04 6:57 AM Page 15
STAND INSTALLATION (Only 32LC7D/7DC, 37LC7D, 32LG10)
Carefully place the product screen side down on
a cushioned surface that will protect product and
screen from damage.
1
Assemble the product stand with the product as
shown.
2
Securely install the 4 bolts provided.
3
VESA WALL MOUNTING
This product accepts a VESA-compliant mounting interface pad. (optional)
There 4 threaded holes are available for attaching the bracket.
Plasma TV Model
LCD TV Model
600 mm
600 mm
(32LC7D/7DC,32LG10 only: 200 mm)
400 mm
400 mm
(32LC7D/7DC,32LG10 only:
100 mm)
!
NOTE
Screw length needed depends on the wall mount used. For further information, refer to the VESA
Wall Mounting Instruction Guide.
G
15
MFL34797033-en-simple 1/20/04 12:34 AM Page 16
PREPARATION
ANTENNA OR CABLE CONNECTION
1. Antenna (Analog or Digital)
Wall Antenna Socket or Outdoor Antenna without a Cable Box
Connections.
For optimum picture quality, adjust antenna direction if needed.
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Wall
Antenna
Socket
ANTENNA/
CABLE IN
RF Coaxial Wire (75 ohm)
Outdoor
Antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
(VHF, UHF)
Copper Wire
Be careful not to bend the bronze wire
when connecting the antenna.
2. Cable
ANTENNA/
CABLE IN
Cable TV
Wall Jack
RF Coaxial Wire (75 ohm)
ANTENNA/
CABLE IN
UHF
Signal
Amplifier
Antenna
VHF
I
I
I
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.
If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.
If the antenna is not installed properly, contact your dealer for assistance.
G The TV will let you know when the analog, cable, and digital channel scans are complete.
!
NOTE
16
MFL34797033-en-simple 1/20/04 12:34 AM Page 17
EXTERNAL EQUIPMENT SETUP
I
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
I
This part of EXTERNAL EQUIPMENT SETUP mainly use picture for LCD TV model.
HD RECEIVER SETUP
This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do
receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
When connecting Component cable
AUDIO
R
MI IN
RGB(PC)
SERVICE
(RGB/DVI)
CON
1. How to connect
R
COMPONENT IN
(CONT
(
)
Connect the video outputs Y, PB, PR of the digital set
2
1
1
top box to the COMPONENT IN VIDEO 1 jacks on
the set. Match the jack colors (Y = green, PB = blue, and
PR = red).
S-
AUDIO
VIDEO
/DVI IN
Connect the audio output of the digital set-top box to
the COMPONENT IN AUDIO 1 jacks on the set.
2
1
2
2. How to use
I
Turn on the digital set-top box.
(
)
Refer to the owner’s manual for the digital set-top box. operation
I
I
Select Component 1 input source by using the INPUT
button on the remote control.
Y
PB
PR
L
R
If connected to COMPONENT IN2 input, select
Component 2 input source.
Y, CB/PB, CR/PR
HDMI1/DVI,
HDMI2
Signal
Component 1/2
Horizontal
Vertical
Resolution
(
Frequency KHz
)
(
Frequency Hz
)
480i
480p
720p
1080 i
1080 p
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
15.73
15.73
59.94
60.00
720x480i
720x480p
1280x720p
1920x1080i
31.47
31.50
59.94
60.00
44.96
45.00
59.94
60.00
33.72
33.75
59.94
60.00
26.97
27.00
33.71
33.75
67.432
67.50
23.976
24.00
29.97
30.00
59.94
60.00
1920x1080p
17
MFL34797033-en-simple 1/20/04 12:34 AM Page 18
EXTERNAL EQUIPMENT SETUP
DVD SETUP
When connecting Component cable
1. How to connect
(
)
Connect the video outputs Y, PB, PR of the DVD to the
R
1
2
COMPONENT IN
COMPONENT IN VIDEO1 jacks on the set.
(CONT
2
1
Match the jack colors
(
)
Y = green, PB = blue, and PR = red .
S-
AUDIO
VIDEO
I/DVI IN
Connect the audio outputs of the DVD to the
COMPONENT IN AUDIO1 jacks on the set.
2. How to use
1
2
I
Turn on the DVD player, insert a DVD.
I
I
I
Select Component 1 input source by using the INPUT
button on the remote control.
Y
PB
PR
L
R
If connected to COMPONENT IN 2 input, select
Component 2 input source.
Refer to the DVD player's manual for operating instructions.
When connecting HDMI cable
1. How to connect
RGB IN
HDMI IN
AUD
RGB(PC)
(RGB/
Connect the HDMI output of the DVD to the
HDMI/DVI IN 1 or HDMI IN 2 jack on the set.
COMPONENT I
1
2
1
2
No separated audio connection is necessary.
2
1
VIDEO
HDMI supports both audio and video.
HDMI/DVI IN
2. How to use
I
Select HDMI1 or HDMI2 input source by using the
1
INPUT button on the remote control.
I
Refer to the DVD player's manual for operating instructions.
HDMI-DVD OUTPUT
18
MFL34797033-en-simple 1/20/04 12:34 AM Page 19
VCR SETUP
L
R
ANT IN
S-VIDEO
VIDEO
When connecting with a RCA cable
1. How to connect
ANT OUT OUTPUT
SWITCH
Connect the AUDIO/VIDEO jacks between TV and
VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red)
1
ANTENNA/
CABLE IN
DIGITAL
AUDIO OUT
UDIO
REMOTE
OPTAL
GB/DVI) SERVICE
1
CONTROL IN
2. How to use
I
Insert a video tape into the VCR and press PLAY on the
)
RS-232C IN
(CONTROL & SERVE)
T IN
(
VCR. Refer to the VCR owner’s manual.
ADIO O
I
I
Select AV1 input source by using the INPUT button on
the remote control.
(
)
MONO
AUDIO
AUDIO
VIDEO
S-VIDEO
If connected to AV IN2, select AV2 input source.
G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO
jack of the set.
!
NOTE
L
R
ANT IN
S-VIDEO
VIDEO
When connecting with an S-Video cable
1. How to connect
ANT OUT OUTPUT
SWITCH
Connect the S-VIDEO output of the VCR to the
S -VIDEO input on the set.
1
ANTENNA/
CABLE IN
Connect the audio outputs of the VCR to the AUDIO
2
input jacks on the set.
1
2
DIGITAL
AUDIO OUT
OPTICAL
UDIO
REMOTE
SERVICE
B/DVI)
CONTROL IN
2. How to use
R232C IN
(CONT& SERVICE)
T IN
I
Insert a video tape into the VCR and press PLAY on the VCR.
(
)
Refer to the VCR owner’s manual.
AIO O
I
I
Select AV1 input source by using the INPUT button on the
remote control.
(
)
MONO
AUDIO
AUDIO
VIDEO
S-VIDEO
If connected to AV IN2, select AV2 input source.
CAUTION
G Do not connect to both Video
and S-Video at the same time. In
the event that you connect both
Video and the S-Video cables,
only the S-Video will work.
!
NOTE
G The picture quality is improved: compared to normal
composite (RCA cable) input.
19
MFL34797033-en-simple 1/20/04 12:34 AM Page 20
EXTERNAL EQUIPMENT SETUP
PC SETUP
When connecting D-sub 15pin cable
1. How to connect
RGB IN
AUDIO
HDMI IN
REMOTE
RGB(PC)
(RGB/DVI) SERVICE
CONTROL IN
RS-232C IN
(CONTROL & SERV
OMPONENT IN
2
1
2
1
(
)
)
Connect the RGB output of the PC to the RGB PC
jack on the set.
1
2
AUDIO
S-VIDEO
VIDEO
VI
HDMI/DVI IN
(
Connect the PC audio output to the AUDIO RGB/DVI
jack on the set.
1
2
2. How to use
I
Turn on the PC and the TV.
I
Select RGB-PC input source by using the INPUT button
on the remote control.
RGB OUTPUT
AUDIO
When connecting HDMI to DVI cable
1. How to connect
ANTENNA/
CABLE IN
Connect the DVI output of the PC to the HDMI/DVI
IN 1 jack on the set.
DIGITAL
RGB IN
AUDIO OUT
OPTICAL
1
2
HDMI IN
AUDIO
REMOTE
RGB(PC)
SERVICE
(RGB/DVI)
CONTROL IN
RS-232C IN
COMPONENT IN
(CONTROL & SERVICE)
Connect the PC audio output to the AUDIO
2
1
2
AUDIO
(
)
RGB/DVI jack on the set.
1
(
)
AUDIO
S-VIDEO
MONO
A
VIDEO
VIDEO
HDMIIN
2. How to use
I
2
Turn on the PC and the TV.
1
I
Select HDMI1 input source by using the INPUT button on
the remote control.
Supported Display Specifications
RGB-PC, HDMI1/DVI-PC mode
DVI-PC OUTPUT
AUDIO
Horizontal
(
Frequency KHz
Vertical
(
Frequency Hz
Resolution
)
)
640x350
31.469
31.469
31.469
37.879
48.363
47.776
47.720
47.130
70.08
70.08
59.94
60.31
60.00
59.87
59.799
59.65
!
NOTE
* RGB-PC mode only
720x400
640x480
800x600
1024x768
1280x768
1360x768
1366x768
G Depending on graphic
card and signal status,
there can be some
shaking to find best
picture in a little time.
* LCD TV only
20
MFL34797033-en-simple 1/20/04 12:34 AM Page 21
WATCHING TV
TURNING ON TV
INPUT
TV INPUT
POWER
DVD
MODE
First, connect power cord correctly.
1
At this moment, the TV switches to standby mode.
I
In standby mode to turn TV on, press the
, INPUT, CH (D or E
)
button on the TV or press the POWER, INPUT, TV INPUT, CH(D or
VOL
MUTE
FAV
CH
E), Number (0~9) button on the remote control.
1
4
7
2
3
6
Select the viewing source by using the TV INPUT, INPUT button on the
remote control.
2
3
5
8
0
9
I
This TV is programmed to remember which power state it was last set to,
even if the power cord is out.
BACK
PICTURE
SOUND
SAP
CC
When finished using the TV, press the POWER button on the remote con-
trol. The TV reverts to standby mode.
!
NOTE
G If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
CHANNEL SELECTION
VOL
MUTE
FAV
CH
Press the CH (D or E) or NUMBER buttons to select a channel number.
1
1
2
3
6
4
7
5
8
0
9
BACK
PICTURE
SOUND
SAP
CC
VOLUME ADJUSTMENT
Adjust the volume to suit your personal preference.
Press the VOL (D or E) button to adjust the volume.
1
VOL
MUTE
FAV
CH
If you want to switch the sound off, press the MUTE button.
2
1
4
2
5
3
6
You can cancel the Mute function by pressing the MUTE or VOL (D or E
button.
)
3
21
MFL34797033-en-simple 1/20/04 12:34 AM Page 22
WATCHING TV
CHANNEL SEARCH
INPUT
TV INPUT
POWER
DVD
Auto Scan (Auto Tuning)
MODE
CABLE
UDIO
A
Automatically finds all channels available through antenna
or cable inputs, and stores them in memory on the channel
list.
MENU
HT -
RIG
B
Run Auto Tuning again after any Antenna/Cable connection
changes.
ENTER
A password is required to gain access to Auto Tuning menu
if the Lock System is turned on.
Auto Tuning
Manual Tuning
Channel Edit
Press the MENU button and then use D or E button
to select the SETUP menu.
1
Press the G button and then use D or E button to
select Auto Tuning.
2
1
Press the ENTER button to begin the channel search.
Allow Auto Tuning to complete the channel search
3
Auto Tuning
Manual Tuning
Channel Edit
G
cycle for ANTENNA and CABLE.
Selection ( or ) leads you to
G
the Auto Tuning screen.
!
NOTE
2
Auto Tuning
Manual Tuning
Channel Edit
Processing Auto Tuning...
Selection (
DTV Ch.23
you to the
Found Channel(s): 16
screen.
Press to stop the current
scan and start ANALOG
ANTENNA channel scan.
Analog TV antenna
Digital DTV antenna
Analog CATV cable
Next
MENU Prev
Digital CADTV cable
3
22
MFL34797033-en-simple 1/20/04 12:34 AM Page 23
ON-SCREEN MENUS SELECTION
(
Your TV's OSD On Screen Display may differ slightly from what is shown in this manual.
)
Press the MENU button and then use D or E button to select the each menu.
1
Press the G button and then use D E F G button to display the available menus.
2
SETUP
I
Auto Tuning
Manual Tuning
Channel Edit
All available TV channels are searched and stored
automatically.
Auto Tuning
I
I
User can do manual channel selection and add or
delete individual channels.
Manual Tuning
Channel Edit
You can add or delete in the channel list.
I
PICTURE
Select the preset value in the Picture Mode menu
based on the program category: Dynamic, Standard,
Mild, User1, User2.
Picture Mode
Picture Mode
Color Temperature
XD
: User1
: Cool
I
I
Choose one of three automatic color adjustments
: Cool, Medium, Warm, User
Color Temperature
Advanced
Aspect Ratio
Picture Reset
Screen
: 16:9
It is LG Electronic’s unique picture improving tech-
nology to display a real HD source through an
advanced digital signal processing algorithm.
XD
I
I
Select Auto or Manual (XD Contrast, XD Color, XD Noise).
Cinema 3:2 Mode (On, Off)
Set up the TV for the best picture appearance for
viewing movies.
Black Level (Low, High)
Advanced
I
Adjusting the contrast and the brightness of the
screen using the black level of the screen.
I
I
I
Select the desired picture format.
: Set by program, 4:3, 16:9, Zoom1, Zoom2, Just Scan.
Aspect Ratio
Use to quickly reset all the Picture menu options to
their original factory preset values.
Picture Reset
Screen
Adjust the screen Resolution, Position, Size, Phase,
Reset.
23
MFL34797033-en-simple 1/20/04 12:34 AM Page 24
WATCHING TV
AUDIO
Sound Mode
Auto Volume
Balance
: Standard
: On
I
I
Sound Mode lets you enjoy the best sound with-
out any special adjustment.
: Standard, Music, Movie, Sports and User
Sound Mode
Auto Volume
: 0
TV Speaker
: On
Scans for changes in sound levels during commer-
cials, then adjusts the sound to match the specified
audio level.
I
Balance
Adjust the left/right sound of speaker.
Turn the TV speaker On or off.
I
TV Speaker
TIME
Clock
: Oct 19, 2006, 03:44 AM
I
Auto: The time is set automatically from a digital
channel signal.
Select your viewing area time zone.
Select Auto, Off, On depending on whether or
not your viewing area observes Daylight Saving
time.
Off Time
On Time
Sleep Time
Auto Sleep
: Off
: Off
: Off
: Off
Clock
I
Manual: Set the clock manually.
Select On or Off.
Off Time
On Time
I
I
I
Select On or Off.
Select the amount of time before your TV turns off
automatically: Off, 10, 20, 30, 60, 90, 120, 180,
240.
Sleep Time
Auto Sleep
I
TV will be automatically turned off, in case of no sig-
nal for 10 minutes.
24
MFL34797033-en-simple 1/20/04 12:34 AM Page 25
OPTION
I
Language
Input Label
SimpLink
Key Lock
Caption
: English
Select your desired language for on screen menus
: English, Spanish, French.
Language
: Off
: Off
: Off
: Orbiter
: Off
: 1
I
I
Input Label
Set a label to each input source.
Control and play other AV devices connected to the
TV through HDMI cable without additional cables
and settings.
ISM Method
Low Power
Set ID
SimpLink
key Lock
I
I
This feature can be used to prevent unauthorized
viewing by locking out the front panel controls.
Plasma TV model only
Mode: When selecting Off, Submenus for Analog,
DTV, and Digital Option become disabled.
Analog: CC1~ CC4 , Text1~ Text4.
Digital: Service1~ Service6
Digital Option: Customize the DTV/CADTV captions
that appear on your screen.
I
I
I
Caption
I
Use it to minimize any fixed image on the screen.
: Normal, Orbiter, Inversion, White Wash.
ISM Method
Low Power
Set ID
I
I
Reduces the plasma display power consumption.
Choose the desired TV ID number.
LOCK
For USA
Lock System
: Off
I
I
I
I
Lock System
Set Password
Block Channel
Select On or Off.
Set Password
Change the password.
Block Channel
Movie Rating
Select a channel number that you wish to block.
TV Rating-Children
TV Rating-General
Blocks movies according to the movie ratings limits
specified.
Movie Rating
Downloadable Rating
Input Block
I
I
Prevents children from watching certain children's
TV programs, according to the ratings limit set.
TV Rating-Children
TV Rating-General
For Canada
Based on the ratings, blocks certain TV programs
that you and your family do not want to view.
Lock System
: Off
Set Password
TV Rating-English
TV Rating-French
I
I
I
Selecting canadian english language rating system.
Selecting canadian french language rating system.
Block Channel
TV Rating-English
TV Rating-French
Downloadable Rating
Input Block
Downloadable
Rating
This function may become available in the future and
will be available only for digital channel signal.
I
Enables you to select a source to block from the
external source devices you have hooked up.
Input Block
25
MFL34797033-en-simple 1/20/04 12:34 AM Page 26
APPENDIX
TROUBLESHOOTING
The operation does not work normally.
I
Check to see if there is any object between the product and the remote control
causing obstruction. Ensure you are pointing the remote control directly at the TV.
Ensure that the batteries are installed with correct polarity (+ to +, - to -).
Ensure that the correct remote operating mode is set: TV, VCR etc.
Install new batteries.
The remote control
doesn’t work
I
I
I
I
I
I
Is the sleep timer set?
Power is suddenly
turned off
Check the power control settings. Power interrupted.
No broadcast on station tuned with Auto off activated.
The video function does not work.
I
Check whether the product is turned on.
I
I
I
I
Try another channel. The problem may be with the broadcast.
Is the power cord inserted into wall power outlet?
Check your antenna direction and/or location.
No picture &No sound
Test the wall power outlet, plug another product’s power cord into the outlet
where the product’s power cord was plugged in.
I
Picture appears slowly
after switching on
This is normal, the image is muted during the product startup process. Please
contact your service center, if the picture has not appeared after five minutes.
I
I
I
I
I
Adjust Color in menu option.
Keep a sufficient distance between the product and the VCR.
Try another channel. The problem may be with the broadcast.
Are the video cables installed properly?
No or poor color
or poor picture
Activate any function to restore the brightness of the picture.
Horizontal/vertical bars
or picture shaking
I
Check for local interference such as an electrical appliance or power tool.
I
I
I
Station or cable product experiencing problems, tune to another station.
Station signal is weak, reorient antenna to receive weaker station.
Check for sources of possible interference.
Poor reception on
some channels
Lines or streaks
in pictures
I
Check antenna (Change the direction of the antenna).
26
MFL34797033-en-simple 1/20/04 12:34 AM Page 27
The audio function does not work.
I
Press the VOL or VOLUME button.
I
I
I
Sound muted? Press MUTE button.
Picture OK & No sound
Try another channel. The problem may be with the broadcast.
Are the audio cables installed properly?
No output from one
of the speakers
I
I
Adjust Balance in menu option.
A change in ambient humidity or temperature may result in an unusual noise
when the product is turned on or off and does not indicate a fault with the
product.
Unusual sound from
inside
the product
There is a problem in PC mode. (Only PC mode applied)
I
Adjust resolution, horizontal frequency, or vertical frequency.
The signal is out of range
I
Check the input source.
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
I
Work the Auto configure or adjust clock, phase, or H/V position. (Option)
I
I
Check the signal cable.
Screen color is unstable
or single color
Reinstall the PC video card.
27
MFL34797033-en-simple 1/20/04 12:34 AM Page 28
APPENDIX
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can
enjoy your new TV.
Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then
use it to wipe the screen.
1
2
Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.
Cleaning the Cabinet
I
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
I
Please be sure not to use a wet cloth.
Extended Absence
CAUTION
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.
G
28
MFL34797033-en-simple 1/20/04 12:34 AM Page 29
PRODUCT SPECIFICATIONS
42PC5D (42PC5D-UL)
42PC5DC (42PC5DC-UL)
50PC5D (50PC5D-UL)
50PC5DC (50PC5DC-UL)
MODELS
41.3 x 30.2 x 12.2 inches
1048.0 x 766.0 x 310.0 mm
41.3 x 28.1 x 3.3 inches
1048.0 x 713.0 x 83.5 mm
48.9 x 34.9 x 14.6 inches
1242.0 x 887.6 x 370.0 mm
48.9 x 32.6 x 3.5 inches
1242.0 x 827.2 x 88.0 mm
Including stand
Dimensions
(Width x Height x Depth)
Excluding stand
61.7 pounds / 28.0 kg
54.2 pounds / 24.6 kg
86.6 pounds / 39.3 kg
76.3 pounds / 34.6 kg
Weight
including stand
excluding stand
AC100-240V ~ 50/60Hz
Power requirement
NTSC-M, ATSC, 64 & 256 QAM
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
75 ohm
Television System
Program Coverage
External Antenna Impedance
32 ~ 104°F (0 ~ 40°C)
Less than 80%
Operating Temperature
Operating Humidity
Environment condition
-4 ~ 140°F (-20 ~ 60°C)
Less than 85%
Storage Temperature
Storage Humidity
32LC7D (32LC7D-UK)
32LC7DC (32LC7DC-UK)
32LG10 (32LC7D-UK
37LC7D
(37LC7D-UK)
42LC7D
(42LC7D-UK)
MODELS
)
31.8 x 23.9x 9.8 inches 36.5 x 27.3 x 11.0 inches 40.7 x 29.5 x 11.3 inches
806.6 x 606.5 x 249.0mm 927.0 x 692.8 x 280.5 mm 1033.4 x 750.0 x 287.6 mm
31.8 x 21.7 x 3.1 inches 36.5 x24.8 x 3.5 inches 40.7 x 27.0x 3.5 inches
806.6 x 552.3 x 79.0 mm 927.0 x 630.0 x 88.0 mm 1033.4 x 686.8 x 88.5 mm
Including stand
Excluding stand
Dimensions
(Width x Height x Depth)
30.2 pounds / 13.7 kg 44.1 pounds / 20.0 kg 54.9 pounds / 24.9 kg
24.7 pounds / 11.2 kg 35.3 pounds / 16.0 kg 45.0 pounds / 20.4 kg
Weight
including stand
excluding stand
AC100-240V ~ 50/60Hz
NTSC-M, ATSC, 64 & 256 QAM
Power requirement
Television System
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
75 ohm
Program Coverage
External Antenna Impedance
32 ~ 104°F (0 ~ 40°C)
Less than 80%
Operating Temperature
Operating Humidity
Environment condition
-4 ~ 140°F (-20 ~ 60°C)
Less than 85%
Storage Temperature
Storage Humidity
I
The specifications shown above may be changed without prior notice for quality improvement.
29
MFL34797033-en-simple 1/20/04 12:34 AM Page 30
APPENDIX
OPEN SOURCE SOFTWARE NOTICE
The following GPL executables and LGPL/MPL libraries used in this product are subject to the GPL/LGPL/MPL
License Agreements:
GPL EXECUTABLES:
I
Linux kernel 2.6.12
I
busybox
LGPL LIBRARIES:
I
uclibc
MPL LIBRARIES:
I
Nanox
LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing
such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at:
This offer is valid for a period of three(3) years from the date of the distribution of this product by LG
Electronics.
You can obtain a copy of the GPL, LGPL and MPL licenses on the CD-ROM provided with this product.
I
This software is based in part on the work of the Independent JPEG Group.
I
This software includes the Zlib compression library, developed by Jean-loup Gailly and Mark Adler.
Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
30
MFL34797033-en-simple 1/20/04 12:34 AM Page 31
MFL34797033-en-simple 1/20/04 12:34 AM Page 32
|