LG 27BP450Y User Manual

OWNER’S MANUAL  
LED LCD MONITOR  
(LED Monitor*)  
* LG LED Monitor applies LCD screen with LED backlights.  
Please read this manual carefully before operating your set and  
retain it for future reference.  
24BP450S  
24BP450Y  
27BP450Y  
Copyright © 2021 LG Electronics Inc. All Rights Reserved.  
NOTE  
ASSEMBLING AND PREPARING  
The components may look different from those illustrated here.  
Without prior notice, all product information and specifications contained in this manual are subject to change  
to improve the performance of the product.  
CAUTION  
To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer  
from which you purchased the product.  
The power cord provided may differ depending upon the region.  
Always use genuine LG components to ensure safety and product performance.  
The product warranty will not cover damage or injury caused by the use of unauthorized components.  
It is recommended that use the supplied components.  
If you use generic cables not certified by LG, the screen may not display or there may be image noises.  
Illustrations in this document represent typical procedures, so they may look different from the actual product.  
Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing  
so may damage the product.)  
Supported Drivers and Software  
You can download and install the latest version from the LGE website (www.lg.com).  
Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this  
way will not be covered by the product warranty.  
Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand  
and could result in personal injury.  
When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen  
may cause damage to it.  
Drivers and Software  
Monitor Driver  
Installation Priority  
Recommended  
Recommended  
OnScreen Control  
3
Product and Button Description  
Moving and Lifting the Monitor  
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or  
damaged and to ensure safe transportation, regardless of its shape or size.  
Place the monitor in the original box or packing material before attempting to move it.  
Before moving or lifting the monitor, disconnect the power cord and all other cables.  
Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.  
When holding the monitor, the screen should face away from you to prevent it from being scratched.  
When transporting the monitor, do not expose the monitor to shock or excessive vibration.  
When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.  
Joystick Button  
How to Use the Joystick Button  
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right/up/  
down with your finger.  
Basic Functions  
CAUTION  
Press the joystick button once with your finger  
to turn on the monitor.  
Power on  
Avoid touching the monitor screen as much as possible.  
- This may result in damage to the screen or some of the pixels used to create images.  
Press and hold the joystick button once more  
Power off  
than 3 seconds with your finger to turn off the  
monitor.  
You can control the volume by moving the  
joystick button left/right.(for HDMI/DP only)  
/
Volume control  
If you use the monitor panel without the stand base, its joystick button may cause the monitor to become  
unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick  
button to malfunction.  
NOTE  
The joystick button is located at the bottom of the monitor.  
4
Installing on a Table  
Adjusting the Stand Height  
Lift the monitor and place it on the table in an upright position. Place the monitor at least 100 mm away from  
the wall to ensure sufficient ventilation.  
1
2
Place the monitor mounted on the stand base in an upright position.  
Handle the monitor with both hands for safety.  
Max. 130.0 mm  
100 mm  
100 mm  
100 mm  
100 mm  
WARNING  
When adjusting the screen height, do not place your hand on the stand body to avoid injury to your fingers.  
CAUTION  
Unplug the power cord before moving or installing the monitor. There is risk of electric shock.  
Make sure to use the power cord that is provided in the product package and connect it to a grounded power  
outlet.  
If you need another power cord, please contact your local dealer or the nearest retail store.  
5
Adjusting the Angle  
Pivot Feature  
1
2
Place the monitor mounted on the stand base in an upright position.  
Adjust the angle of the screen.  
The angle of the screen can be adjusted forward or backward from -5° to 35° for a comfortable viewing  
experience.  
The pivot feature allows the monitor to rotate 90° clockwise.  
Head  
WARNING  
To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as  
illustrated below.  
Be careful not to touch or press the screen area when adjusting the angle of the monitor.  
Stand  
Swivel stand  
Image shown may differ from your Monitor set.  
1
Swivel 355 degrees and adjust the angle of the Monitor set to suit your view.  
6
Using the Kensington Lock  
Installing the Wall Mount Plate  
The Kensington security system connector is located at the back of the Monitor set.  
This monitor meets the specifications for the wall mount plate or other compatible devices.  
For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website  
NOTE  
The wall mount plate is sold separately.  
For more information on installation, refer to the wall mount plate’s installation guide.  
Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the  
screen.  
Connect the monitor to a table using the Kensington security system cable.  
Remove the stand before installing the monitor on a wall mount by performing the stand attachment in  
reverse.  
Installing on the Wall  
Install the monitor at least 100 mm away from the wall and leave about 100 mm of space at each side of the  
monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail  
store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.  
100 mm  
100 mm  
100 mm  
NOTE  
The Kensington security system is optional. You can obtain optional accessories from most electronics stores.  
100 mm  
7
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.  
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.  
CAUTION  
Unplug the power cord before moving or installing the monitor to avoid electric shock.  
Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead  
to injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.  
Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this  
way will not be covered by the product warranty.  
Use the wall mounting bracket and screws that conform to VESA standards. Damage caused by the use or  
misuse of inappropriate components will not be covered by the product warranty.  
Wall Mount (mm)  
75 x 75  
M4 x L10  
4
Standard screw  
Number of screws  
Wall Mount Plate (Optional)  
LSW 149  
When measured from the back of the monitor, the length of each installed screw must be 8 mm or less.  
Wall Mount Plate  
Back of the Monitor  
NOTE  
A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable  
for any accidents relating to the use of non-standard screws.  
Wall Mount Plate  
The wall mount kit includes the installation guide and all necessary parts.  
The wall mounting bracket is optional. You can obtain optional accessories from your local dealer.  
The length of the screw may differ for each wall mounting bracket. If you use screws longer than the standard  
length, it may damage the inside of the product.  
For more information, please refer to the user manual for the wall mounting bracket.  
Back of the Monitor  
Standard screw:  
M4 x L10  
Max. 8 mm  
8
HDMI Connection  
Transmits digital video and audio signals from your PC to the monitor.  
USING THE MONITOR  
Illustrations in this manual may differ from the actual product.  
CAUTION  
Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.  
Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not  
display or a connection error may occur.  
Recommended HDMI cable types  
- High-Speed HDMI®/TM cable  
- High-Speed HDMI®/TM cable with Ethernet  
CAUTION  
Do not press the screen for a prolonged time. This may cause image distortion.  
Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a PC  
screensaver if possible.  
When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power  
outlet.  
The monitor may flicker when turned on in an area where the temperature is low. This is normal.  
Sometimes red, green, or blue spots may appear on the screen. This is normal.  
DisplayPort Connection  
Transmits digital video and audio signals from your PC to the monitor.  
Connecting to a PC  
This monitor supports the *Plug and Play feature.  
NOTE  
* Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure  
anything or install any manual drivers.  
There may be no video or audio output depending on the DP (DisplayPort) version of the PC.  
If you are using a Mini DisplayPort output graphics card, use a Mini DP to DP (Mini DisplayPort to DisplayPort)  
cable or gender that supports DisplayPort1.4. (sold separately)  
D-SUB connection  
Transmits analog video from your PC to the Monitor set.  
NOTE  
When using a D-Sub signal input cable connector for Macintosh  
Mac adapter  
For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA  
connector on the supplied cable to a 15 pin 2 row connector.  
9
Connecting AV Devices  
Connecting Peripherals  
HDMI Connection  
Connecting Headphones  
HDMI transmits digital video and audio signals from your AV device to the monitor.  
Connect peripherals to the monitor via the headphones port.  
NOTE  
NOTE  
Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.  
Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not  
display or a connection error may occur.  
Peripheral devices are sold separately.  
If you use angled earphones, it may cause a problem with connecting another external device to the monitor.  
Therefore, it is recommended to use straight earphones.  
Recommended HDMI cable types  
- High-Speed HDMI®/TM cable  
- High-Speed HDMI®/TM cable with Ethernet  
Angled  
Straight  
(Recommend)  
Depending on the audio settings of the PC and external device, headphones and speaker functions may be  
limited.  
10  
USER SETTINGS  
NOTE  
Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.  
Activating the Main Menu  
1
2
3
Press the joystick button on the bottom of the monitor.  
Move the joystick up/down and left/right to set the options.  
Press the joystick button once more to exit the main menu.  
Joystick Button  
Button  
Menu Status  
Description  
Main menu disabled  
Enables the main menu.  
Exits the main menu.  
Main menu enabled  
(Holding down the button more than 3 seconds to turn off the monitor. You can turn off the monitor this way at any time, including when the OSD is on.)  
Main menu disabled  
Adjusts the monitor volume level.(for HDMI/DP only)  
Enters the Input features.  
Main menu enabled  
Main menu disabled  
Main menu enabled  
Main menu disabled  
Main menu enabled  
Main menu disabled  
Main menu enabled  
Adjusts the monitor volume level.(for HDMI/DP only)  
Enters the Settings feature.  
Displays the information on the current input.  
Turns off the monitor.  
Displays the information on the current input.  
Enters the Picture Mode feature. (for HDMI/DP only)  
11  
Main Menu Features  
Power Off  
Exit  
Power Off  
Exit  
Input  
Settings  
Input  
Settings  
Auto Configuration  
Picture Mode  
(for HDMI/DP only)  
(for D-SUB only)  
Main Menu  
Description  
Input  
Sets input mode.  
Power Off  
Settings  
Turns off the monitor.  
Configures the screen settings.  
Sets the picture mode.  
Exits the main menu.  
Picture Mode  
Exit  
Auto Configuration  
Operate the Auto configuration for optimal display in D-SUB.  
12  
Menu Settings  
1
2
3
4
To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Settings.  
Move the joystick up/down and left/right to set the options.  
To return to the upper menu or set other menu items, move the joystick to or pressing ( ) it.  
If you want to exit the OSD menu, move the joystick to until you exit.  
24BP450Y  
27BP450Y  
Quick Settings  
Quick Settings  
Input  
Input  
Picture  
Picture  
General  
Sound  
24BP450S  
General  
13  
Customizing settings  
Quick Settings  
Settings > Quick Settings  
Brightness  
Description  
Adjusts the color contrast and brightness of the screen.  
Adjusts the volume level.  
Contrast  
Volume  
No  
Cancel the select.  
Auto Configuration  
for 24/27BP450Y only  
Yes  
Operate the Auto configuration for optimal display in D-SUB.  
Input  
Settings > Input  
Input List  
Description  
Selects the input mode.  
Adjusts the aspect ratio of the screen.  
Full Wide  
Displays the video in wide-screen, regardless of the video signal input.  
Displays video according to the aspect ratio of the video signal input.  
Aspect Ratio  
Original  
NOTE  
The options may disabled at the recommended resolution (1920 x 1080).  
14  
Picture  
Settings > Picture  
Description  
Custom  
Reader  
Photo  
Allows the user to adjust each element. The color mode of the main menu can be adjusted.  
Optimizes the screen for viewing documents. You can brighten the screen in the OSD menu.  
Optimizes the screen to view photos.  
Picture Mode  
Cinema  
Optimizes the screen to improve the visual effects of a video.  
This mode is for users who cannot distinguish between red and green. It enables users with color weakness to easily distinguish  
between the two colors.  
Color Weakness  
Game  
Optimizes the screen for gameplay.  
NOTE  
If the Picture Mode is changed, the screen may flicker or the resolution of your PC screen may be affected.  
This is subsidiary for color weakness user. Therefore if you feel uncomfortable with the screen, please turn off this function.  
This function can’t distinguish some colors in some images.  
15  
Settings > Picture  
Description  
Adjusts the brightness of the screen.  
Brightness  
Contrast  
Adjusts the contrast of the screen.  
Adjusts the sharpness of the screen.  
Sharpness  
Off  
Select this option for everyday viewing. SUPER RESOLUTION+ is turned off in this mode.  
Optimized picture quality is displayed when a user wants crystal clear images. It is effective for high  
quality video or game.  
High  
The optimized picture quality is displayed when a user wants images between low and high modes  
for comfortable viewing. It is effective for UCC or SD video.  
Middle  
Low  
SUPER RESOLUTION+  
The optimized picture quality is displayed when a user wants smooth and natural images. It is  
effective for slow-moving pictures or still images.  
Picture Adjust  
NOTE  
Because this is a function to increase the sharpness of low resolution pictures, it is not recommended to use the function for  
normal text or for desktop icons. Doing so may result in unnecessarily high sharpness.  
Sets the offset level (for HDMI only).  
Offset: as a reference for a video signal, this is the darkest color the monitor can display.  
Black Level  
DFC  
High  
Low  
On  
Keeps the current contrast ratio of the screen.  
Lowers the black levels and raises the white levels from the current contrast ratio of the screen.  
Adjusts the brightness automatically according to the screen.  
Disables the DFC feature.  
Off  
16  
Sets a response time for displayed pictures based on the speed of the screen.  
For a normal environment, it is recommended that you use Fast.  
For a fast-moving picture, it is recommended that you use Faster.  
Once Faster Mode is selected, Motion Blur may occur depending on the content.  
Response Time  
Faster  
Fast  
Sets the response time to faster.  
Sets the response time to fast.  
Normal  
Off  
Sets the response time to normal.  
Does not use the response time improvement feature.  
Game Adjust  
You can control the black contrast to have better visibility in dark scenes.  
Increasing the Black Stabilizer value brightens the low gray level area on the screen. (You can easily distinguish objects on dark  
game screens.)  
Reducing the Black Stabilizer value darkens the low gray level area and increases the dynamic contrast on the screen.  
Black Stabilizer  
Crosshair  
Crosshair provides a mark on the center of the screen for First Person Shooter (FPS) games. Users can select the Crosshair that fits  
their gaming environment among four different cross hairs.  
17  
Mode 1, Mode 2,  
Mode 3  
The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the  
lighter the image becomes.  
Gamma  
Mode 4  
If you do not need to adjust the gamma settings, select Mode 4.  
Selects the factory default picture color.  
Custom: The user can adjust it to red, green or blue by customization.  
Warm: Sets the screen color to a reddish tone.  
Medium: Sets the screen color between a red and blue tone.  
Cool: Sets the screen color to a bluish tone.  
Color Temp  
Color Adjust  
Red  
Green  
You can customize the picture color using Red, Green, and Blue colors.  
Blue  
Horizontal  
To move image left and right.  
Vertical  
Clock  
To move image up and down.  
Configuration Adjust  
(D-SUB only)  
To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change.  
To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.  
Phase  
User can set the desired resolution.This option is enabled only when the screen resolution on your computer is set to the following(D-SUB only).  
NOTE  
The function is enabled only when the screen resolution on your computer is set to the following, except that the PC output wrong resolution.  
Resolution  
(D-SUB only)  
1024 x 768, 1280 x 768, 1360 x 768, 1366 x 768, Off  
1280 x 960, 1600 x 900, Off  
1440 x 900, 1600 x 900, Off  
No  
Cancel the select.  
Picture Reset  
Do you want to reset your settings?  
Yes  
Returns to the default settings.  
18  
Sound  
24BP450S  
Settings > Sound  
Volume  
Description  
Description  
To adjust the Volume of headphone or speaker.  
General  
Settings > General  
Language  
To choose the language in which the control names are displayed.  
High  
Low  
Off  
Enables SMART ENERGY SAVING you can save energy with this energy- high efficient.  
Enables SMART ENERGY SAVING you can save energy with this energy- low efficient.  
Disables SMART ENERGY SAVING .  
SMART ENERGY SAVING  
Automatic Standby  
* SMART ENERGY SAVING : Conserve energy by using luminance compensation algorithm.  
Feature that automatically turns off the monitor when there is no movement on the screen for a period of time. You can set a timer for the auto-off function. (8H, 6H, 4H and Off)  
Prevents incorrect key input.  
On  
Key input is disabled.  
OSD Lock  
NOTE  
All function except for the OSD Lock mode, brightness, Contrast, Input, Information and Volume are disabled.  
Off Key input is enabled.  
The display information will be shown the Model, Total Power On Time, Serial Number, Resolution.  
Information  
Reset  
No  
Cancel the select.  
Do you want to reset your settings?  
Yes  
Returns to the default settings.  
NOTE  
The value of energy saving data may differ depending on panel and panel suppliers.  
If you select the option of SMART ENERGY SAVING is High or Low, monitor luminance become lower or higher depend on source.  
19  
TROUBLESHOOTING  
Check the following before calling for service.  
No image appears  
Is the power cord of the display connected?  
Check and see if the power cord is connected properly to the power outlet.  
Do you see an "Out of Range" message on the screen?  
This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this  
manual and configure your display again.  
Do you see a "NO SIGNAL" message on the screen?  
After the monitor is on "NO SIGNAL", the monitor goes to DPM mode.  
This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it.  
Can 't you control some functions in OSD?  
Can't you select some menu in OSD?  
You can unlock the OSD controls at any time by entering the OSD lock menu and changing items to off.  
CAUTION  
Check Control Panel Display Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.  
If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.  
The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card  
manufacturer.  
Display image is incorrect  
The screen color is mono or abnormal.  
Check if the signal cable is properly connected and use a screwdriver to fasten if necessary.  
Make sure the video card is properly inserted in the slot.  
Set the color setting higher than 24 bits (true color) at Control Panel Settings.  
Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.  
The screen blinks.  
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?  
Have you installed the display driver?  
Be sure to install the display driver from our web site: http://www.lg.com.  
Make sure to check if the video card supports Plug&Play function.  
The screen is flickering.  
Did you select the recommended resolution?  
If the selected resolution is HDMI 1080i 60/50 Hz, the screen may be flickering. Change the resolution to the recommended resolution 1080P.  
20  
PRODUCT SPECIFICATION  
24BP450Y 24BP450S  
Color Depth  
8-bit color is supported.  
1920 x 1080 @ 75 Hz (HDMI/DP)  
1920 x 1080 @ 60 Hz (D-Sub)  
Max Resolution  
Resolution  
Recommended Resolution  
Power Rating  
1920 x 1080 @ 60 Hz  
19 V  
1.3 A  
On mode: 13.5 W Typ. (ENERGY STAR® standard)*(24BP450S)  
On mode: 13.2 W Typ. (ENERGY STAR® standard)*(24BP450Y)  
Sleep Mode (Standby Mode) ≤ 0.3 W **  
Power Sources  
Power Consumption  
Off Mode ≤ 0.3 W  
Type ADS-25SFA-19-3 19025E, manufactured by SHENZHEN HONOR ELECTRONIC,  
or Type AD10560LF, manufactured by PI Electronics (H.K.) Ltd.,  
AC/DC adaptor  
Output: 19 V  
1.3 A  
Operating Conditions  
Temperature  
Humidity  
0 °C to 40 °C  
Less than 80 %  
-20 °C to 60 °C  
Less than 85 %  
Environmental Conditions  
Storing Conditions  
Temperature  
Humidity  
Monitor Size (Width x Height x Depth)  
With Stand  
539.9 x 506 x 249.5 (mm)  
539.9 x 321.4 x 56.2 (mm)  
4.3 kg  
Dimensions  
Without Stand  
With Stand  
Weight (Without Packaging)  
Without Stand  
2.3 kg  
Specifications are subject to change without notice.  
The ~ symbol means alternating current, and the symbol  
means direct current.  
The power consumption level can be different by operating condition and monitor setting.  
* The On mode power consumption is measured with ENERGY STAR® test standard.  
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).  
21  
PRODUCT SPECIFICATION  
27BP450Y  
Color Depth  
8-bit color is supported.  
1920 x 1080 @ 75 Hz (HDMI/DP)  
1920 x 1080 @ 60 Hz (D-Sub)  
Max Resolution  
Resolution  
Recommended Resolution  
Power Rating  
1920 x 1080 @ 60 Hz  
19 V  
1.3 A  
On mode: 14.5 W Typ. (ENERGY STAR® standard)*  
Sleep Mode (Standby Mode) ≤ 0.3 W **  
Off Mode ≤ 0.3 W  
Power Sources  
AC/DC adaptor  
Power Consumption  
Type ADS-25SFA-19-3 19025E, manufactured by SHENZHEN HONOR ELECTRONIC,  
or Type AD10560LF, manufactured by PI Electronics (H.K.) Ltd.,  
Output: 19 V  
1.3 A  
Operating Conditions  
Temperature  
Humidity  
0 °C to 40 °C  
Less than 80 %  
-20 °C to 60 °C  
Less than 85 %  
Environmental Conditions  
Dimensions  
Storing Conditions  
Temperature  
Humidity  
Monitor Size (Width x Height x Depth)  
With Stand  
612 x 526.4 x 249.5 (mm)  
612 x 362.5 x 56.2 (mm)  
5.1 kg  
Without Stand  
With Stand  
Weight (Without Packaging)  
Without Stand  
3.1 kg  
Specifications are subject to change without notice.  
The ~ symbol means alternating current, and the symbol  
means direct current.  
The power consumption level can be different by operating condition and monitor setting.  
* The On mode power consumption is measured with ENERGY STAR® test standard.  
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).  
22  
Factory Support Mode (Preset Mode, PC)  
D-SUB  
Preset Mode  
Horizontal Frequency (kHz)  
Vertical Frequency (Hz)  
Polarity (H/V)  
Remarks  
720 x 400  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
1024 x 768  
1024 x 768  
31.468  
31.469  
37.5  
70.08  
59.94  
75  
-/+  
-/-  
-/-  
37.879  
46.875  
48.363  
60.023  
60.317  
75  
+/+  
+/+  
-/-  
60  
75.029  
+/+  
1152 x 864  
1280 x 1024  
1280 x 1024  
1680 x 1050  
1920 x 1080  
67.500  
63.981  
79.976  
65.290  
67.500  
75  
+/+  
+/+  
+/+  
-/+  
60.023  
75.035  
59.954  
60  
+/+  
Recommend Mode  
23  
HDMI/DisplayPort  
Preset Mode  
Horizontal Frequency (kHz)  
Vertical Frequency (Hz)  
Polarity (H/V)  
Remarks  
720 x 400  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
1024 x 768  
1024 x 768  
1152 x 864  
1280 x 1024  
31.468  
31.469  
37.5  
70.08  
59.94  
75  
-/+  
-/-  
-/-  
37.879  
46.875  
48.363  
60.023  
67.500  
63.981  
60.317  
75  
+/+  
+/+  
-/-  
60  
75.029  
75  
+/+  
+/+  
+/+  
60.023  
1280 x 1024  
1680 x 1050  
1920 x 1080  
1920 x 1080  
79.976  
65.290  
67.500  
83.89  
75.035  
59.954  
60  
+/+  
-/+  
+/+  
+/+  
Recommend Mode  
74.97  
24  
HDMI Timing (Video)  
Factory support mode  
Horizontal Frequency(kHz)  
Vertical Frequency(Hz)  
HDMI  
(Preset Mode)  
480P  
576P  
720P  
720P  
31.50  
31.25  
37.50  
45.00  
60  
50  
50  
60  
O
O
O
O
1080P  
1080P  
56.25  
67.50  
50  
60  
O
O
Recommend Mode  
25  
This Product qualifies for ENERGY STAR®  
Changing the factory default configuration and settings or enabling certain optional features  
and functionalities may increase energy consumption beyond the limits required for ENERGY  
The model and serial number of the product are located on the back and on one side of the product.  
Record them below in case you ever need service.  
STAR®certification.  
Model  
Refer to ENERGYSTAR.gov for more information on the ENERGY STAR®program.  
Serial No.  

Universal Power Group 12v 4a User Manual
Samsung Aqt24w6wb User Manual
Samsung Aq24a1 2 Rcd User Manual
Philips Sbc Sc450 User Manual
NEC P350W User Manual
JORJIN WA6800 00 User Manual
HITACHI 36UX59B User Manual
FURRION CHILL FACR14SA BL User Manual
EPSON BRIGHTLINK PRO 1470UI 02 User Manual
ATLAS SOUND MPA1202 User Manual