LG 24TQ520S User Manual

OWNER’S MANUAL  
Safety and Reference  
(LED TV*)  
* LG LED TV applies LCD screen with LED backlights.  
Please read this manual carefully before operating your TV and retain it for future  
reference.  
24TQ510S  
24TQ520S  
27TQ615S  
27TQ625S  
Copyright 2022 LG Electronics Inc. All Rights Reserved.  
y Install the product in a neat and dry place.  
SAFETY PRECAUTIONS  
Please read these safety precautions carefully before using the  
product.  
Dust or moisture can cause electrical shock, fire or product  
damage.  
y If you can smell smoke or other odors or hear a strange sound  
unplug the power cord and contact the service center.  
WARNING  
If you continue to use without taking proper measures,  
electrical shock or fire can occur.  
y If you dropped the product or the case is broken, turn off the  
product and unplug the power cord.  
If you continue to use without taking proper measures,  
If you ignore the warning message, you may be seriously injured  
or there is a possibility of accident or death.  
CAUTION  
electrical shock or fire can occur. Contact the service center.  
y Do not drop an object on or apply impact to the product. Do not  
If you ignore the caution message, you may be slightly injured or  
the product may be damaged.  
throw any toys or objects on the product screen.  
It can cause injury to human, problem to product and damage  
Precautions in installing the product  
the display.  
WARNING  
y Do not let the product fall or drop when connecting it with an  
external device.  
y Keep away from heat sources like electrical heaters.  
This may cause injury and/or damage to the product.  
Electrical shock, fire, malfunction or deformation may occur.  
y When connecting it with a game device, keep a distance of four  
times as long as the diagonal measurement of the screen from  
the device.  
y Keep the packing anti-moisture material or vinyl packing out of the  
reach of children.  
Anti-moisture material is harmful if swallowed. If swallowed  
by mistake, force the patient to vomit and visit the nearest  
hospital. Additionally, vinyl packing can cause suffocation.  
Keep it out of the reach of children.  
If the product falls because of the short cable, this may cause  
injury and/or damage to the product.  
y Leaving a fixed image on the screen for a long time may cause  
damage to the screen and cause image burn-in. To use the product  
for a long period of time, use a screen saver on the PC or utilize  
the residual image prevention function on the product, and when  
the product is not used, turn off the power. Burn-in and related  
problems are not covered by the warranty on this product.  
y Do not put heavy objects on the product or sit upon it.  
If the product collapses or is dropped, you may be injured.  
Children must pay particular attention.  
y Do not leave the power or signal cable unattended on the pathway.  
The passerby can falter, which can cause electrical shock, fire,  
product breakdown or injury.  
y Do not install this product on a wall if it could be exposed to oil or  
oil mist.  
This may damage the product and cause it to fall.  
3
Precautions to the AC adapter and electrical power  
CAUTION  
y Make sure the product ventilation hole is not blocked. Install the  
product in a suitably wide place (more than 100 mm from the  
wall).  
WARNING  
y If water or any foreign substance goes inside the product (TV,  
monitor, power cord, or AC adapter), disconnect the power cord  
immediately and contact the service center.  
If you install the product too close to the wall, it may be  
deformed or fire can break out due to internal heat.  
Otherwise, this may cause a fire or electric shock due to  
damage to the product.  
y Do not block the ventilation hole of the product by a tablecloth or  
curtain.  
y Do not touch the power plug or AC adapter with wet hands. If the  
pins of the plug are wet or dusty, wipe and dry them before use.  
The product can be deformed or fire can break out due to  
overheating inside the product.  
Otherwise, this may cause a fire or electric shock.  
y Install the product on a flat and stable place that has no risk of  
dropping the product.  
y Make sure to completely insert the power cord into the AC adapter.  
If the product is dropped, you may be injured or the product  
If loosely connected, the poor connection may cause a fire or  
may be broken.  
electric shock.  
y Install the product where no EMI occurs.  
y Keep the product away from direct sunlight.  
The product can be damaged.  
y Be sure to use power cords and AC adapters provided or approved  
by LG Electronics, Inc.  
The use of non-approved products may cause a fire or electric  
shock.  
y When unplugging the power cord, always pull it by the plug. Do  
not bend the power cord with excessive force.  
y If you install the product in a place that does not meet the  
recommended conditions, this may cause serious damage to the  
product’s picture quality, life cycle and appearance. Please check  
with LG or a qualified installer before installing. This caution  
applies to a place where there is an abundance of fine dust or oil  
mist, chemical substances are used, the temperature is very high  
or low, the humidity is very high, or the product is likely to remain  
turned on for a long period of time (airport and train station),  
failure to do so will invalidate the warranty.  
The power line can be damaged, which may cause electric  
shock or fire.  
y Be careful not to step or place heavy objects (electronic appliances,  
clothing, etc.) on the power cord or AC adapter. Be careful not to  
damage the power cord or AC adapter with sharp objects.  
Damaged power cords may cause a fire or electric shock.  
y Never disassemble, repair or modify the power cord or AC adapter.  
This may cause a fire or electric shock.  
y Do not install the product in an area with poor ventilation (e.g.on  
a bookshelf, in a closet) or outside and avoid placing on cushions  
or carpets.  
y In addition, do not install it where there are heating objects such as  
lighting equipment.  
4
y Make sure to connect the power cable to the grounded current.  
You may be electrocuted or injured.  
y Use the rated voltage only.  
The product can be damaged, or you may be electrocuted.  
y In the presence of thunder and lightning, never touch the power  
cord and signal cable because it can be very dangerous.  
It can cause electric shock.  
y Do not connect several extension cords, electrical appliances  
or electrical heaters to a single outlet. Use a power bar with a  
grounding terminal designed for exclusive use with the computer.  
CAUTION  
y Be sure to keep the outlet, AC adapter, and pins of the power plug  
clean from dust and etc.  
This may cause a fire.  
y Do not unplug the power cord while the product is in use.  
Electrical shock can damage the product.  
y Use only the power cord supplied with the unit. If you use another  
power cord, make sure that it is certified by the applicable national  
standards when not provided by the supplier. If the power cable is  
faulty in any way, please contact the manufacturer or the nearest  
authorised repair service provider for a replacement.  
A fire can break out due to overheating.  
y Do not touch the power plug with wet hands. Additionally, if the  
cord pin is wet or covered with dust, dry the power plug completely  
or wipe dust off.  
Precautions in moving the product  
You may be electrocuted due to excess moisture.  
y If you don’t intend to use the product for a long time, unplug the  
WARNING  
power cable from the product.  
y Make sure to turn off the product.  
Covering dust can cause a fire, or insulation deterioration can  
cause electric leakage, electric shock or fire.  
y Fix the power cable completely.  
You may be electrocuted or the product can be damaged.  
y Make sure to remove all cables before moving the product.  
You may be electrocuted or the product can be damaged.  
y Make sure the panel faces forward and hold it with both hands to  
move. If you drop the product, the damaged product can cause  
electric shock or fire. Contact an authorised the service center for  
repair.  
y Make sure the product is turned off, unplugged and all cables  
have been removed. It may take 2 or more people to carry larger  
apparatus. Do not press against or put stress on the front panel of  
the apparatus.  
If the power cable is not fixed completely, a fire can break out.  
y Do not insert a conductor (like a metal chopstick) into one end  
of the power cable while the other end is connected to the input  
terminal on the wall. Additionally, do not touch the power cable  
right after plugging into the wall input terminal.  
You may be electrocuted.  
y The AC Cord is the disconnecting device.  
y Please make sure the device is installed near the wall outlet to  
which it is connected and that the outlet is easily accessible.  
y As long as this unit is connected to the AC wall outlet, it is not  
disconnected from the AC power source even if the unit is turned  
off.  
CAUTION  
y Do not shock the product when moving it.  
You may be electrocuted or the product can be damaged.  
y Do not dispose the product-packing box. Use it when you move.  
5
y Set the appropriate resolution and clock by referring to the User’s  
Guide.  
Precautions in using the product  
Your vision can be impaired.  
WARNING  
y Use authorised detergent only when cleaning the product. (Do not  
use benzene, thinner or alcohol.)  
y Do not disassemble, repair or modify the product at your own  
discretion.  
Fire or electric shock accident can occur.  
Contact the service center for check, calibration or repair.  
y When the display is to be left unattended for an extended period of  
time, unplug it from the wall outlet.  
y Keep the product away from water.  
Fire or electric shock accident can occur.  
y Do not shock or scratch the front and sides of the screen with  
metallic objects.  
Otherwise, it may cause damage to the screen.  
y Avoid high temperatures and humidity.  
Product can be deformed.  
y Do not expose to dripping or splashing and do not place objects  
filled with liquids, such as vases, cups, etc. on or over the apparatus  
(e.g. on shelves above the unit).  
y For models using a battery, This device is equipped with a portable  
battery or accumulator. Risk of fire or explosion if the battery is  
replaced by an incorrect type.  
y Batteries should not be exposed to excessive heat. For example,  
keep away from direct sunlight, open fireplace and electric heaters.  
y Do NOT place non-rechargeable batteries in charging device.  
y Using headsets (earphones) for a long time or listening loudly can  
cause damage to your hearing.  
y Spray water onto a soft cloth 2 to 4 times, and use it to clean the  
front frame; wipe in one direction only. Too much moisture may  
cause staining.  
CAUTION  
y Do not put or store inflammable substances near the product.  
There is a danger of explosion or fire due to careless handling  
of the inflammable substances.  
y When cleaning the product, unplug the power cord and scrub  
gently with a soft cloth to prevent scratching. Do not clean with  
a wet cloth or spray water or other liquids directly onto the  
product. An electric shock may occur. (Do not use chemicals such as  
benzene, paint thinners or alcohol)  
CHEMICALS  
WATER  
y Do not use products using high voltage around the Monitor. (ex.  
Electrical Swatter)  
y Take a rest from time to time to protect your vision.  
Monitor may have malfunction as its electrical shock.  
y Keep the product clean at all times.  
y Take a comfortable and natural position when working with a  
product to relax the muscles.  
Mounting on a wall  
y Take a regular break when working with a product for a long time.  
y Do not press strongly upon the panel with a hand or a sharp object  
such as a nail, pencil or pen, or make a scratch on it.  
y Do NOT install this product by yourself as you may injure yourself  
or cause damage to product. Please contact Service personnel  
authorised by Manufacturer.  
y Keep the proper distance from the product.  
Your vision may be impaired if you look at the product too  
closely.  
6
LICENSES  
PREPARING  
Supported licenses may differ by model. For more information about  
NOTE  
licenses, visit www.lg.com.  
y Image shown may differ from your TV.  
y Your TV’s OSD (On Screen Display) may differ slightly from that  
shown in this manual.  
y The available menus and options may differ from the input source  
or product model that you are using.  
y New features may be added to this TV in the future.  
y The TV can be placed in standby mode in order to reduce the power  
consumption. And the TV should be turned off if it will not be  
watched for some time, as this will reduce energy consumption.  
y The energy consumed during use can be significantly reduced if the  
level of brightness of the picture is reduced, and this will reduce  
the overall running cost.  
y The items supplied with your product may vary depending on the  
model.  
y Product specifications or contents of this manual may be changed  
without prior notice due to upgrade of product functions.  
y For an optimal connection, HDMI cables and USB devices should  
have bezels less than 10 mm thick and 18 mm width. Use an  
extension cable that supports USB 2.0 if the USB cable or USB  
memory stick does not fit into your TV’s USB port.  
OPEN SOURCE SOFTWARE  
NOTICE INFORMATION  
To obtain the source code under GPL, LGPL, MPL, and other open  
source licenses that have the obligations to disclose source code, that  
is contained in this product, and to access all referred license terms,  
copyright notices and other relevant documents please visit https://  
LG Electronics will also provide open source code to you on CD-ROM  
for a charge covering the cost of performing such distribution (such  
as the cost of media, shipping, and handling) upon email request to  
This offer is valid to anyone in receipt of this information for a period  
of three years after our last shipment of this product.  
B
<
*A 10 mm  
=
B
*B 18 mm  
=
A
A
y Use a certified cable with the HDMI logo attached. If you do not use  
a certified HDMI cable, the screen may not display or a connection  
error may occur.  
y Recommended HDMI cable types  
- Ultra High Speed HDMI®/™ cable (3 m or less)  
CAUTION  
y Do not use any unapproved items to ensure the safety and product  
life span.  
y Any damage or injuries caused by using unapproved items are not  
covered by the warranty.  
7
SEPARATE PURCHASE  
Separate purchase items can be changed or modified for quality  
improvement without any notification. Contact your dealer to buy  
these items. These devices only work with certain models.  
The model name or design may be changed depending on the  
upgrade of product functions, manufacturer’s circumstances or  
policies.  
LIFTING AND MOVING THE  
TV  
Please note the following advice to prevent the TV from being  
scratched or damaged and for safe transportation regardless of its  
type and size.  
y It is recommended to move the TV in the box or packing material  
that the TV originally came in.  
Magic Remote Control  
y Before moving or lifting the TV, disconnect the power cord and all  
cables.  
y When holding the TV, the screen should face away from you to  
avoid damage.  
Check whether your TV model supports Bluetooth in the Wireless  
Module Specification to verify whether it can be used with the Magic  
Remote.  
y Hold the top and bottom of the TV frame firmly. Make sure not to  
hold the transparent part, speaker, or speaker grill area.  
y When transporting the TV, do not expose the TV to jolts or excessive  
vibration.  
y When transporting the TV, keep the TV upright, never turn the TV  
on its side or tilt towards the left or right.  
y Do not apply excessive pressure to cause flexing/bending of frame  
chassis as it may damage screen.  
8
CAUTION  
USING THE BUTTON  
y You can operate your TV by pressing the button.  
y Avoid touching the screen at all times, as this may result in damage  
to the screen.  
y Image shown may differ from your TV.  
y Do not carry the TV upside-down by holding the stand body (or  
stand base) as this may cause it to fall off, resulting in damage or  
injury.  
y When handling the TV, be careful not to damage the protruding  
joystick button. (Depending on model)  
Basic functions  
Power On (Press)  
Power Off1 (Press and Hold)  
Menu Control (Press2)  
Menu Selection (Press and Hold3)  
1
2
All running apps will close.  
You can access and adjust the menu by pressing the button when  
TV is on.  
SETTING UP THE TV  
3
You can use the function when you access menu control.  
CAUTION  
Adjusting the menu  
y When attaching the stand to the TV set, place the screen facing  
down on a cushioned table or flat surface to protect the screen  
from scratches.  
When the TV is turned on, press the button one time. You can adjust  
the Menu items using the button.  
y Do not apply foreign substances (oils, lubricants, etc.) to the screw  
parts when assembling the product. (Doing so may damage the  
product.)  
Turns the power off.  
Changes the input source.  
NOTE  
Adjusts the volume level.  
y Remove the stand before installing the TV on a wall mount by  
performing the stand attachment in reverse.  
Scrolls through the saved programmes.  
9
Using the kensington security system (optional)  
MOUNTING ON A TABLE  
y Image shown may differ from your TV.  
(This is not available for all models.)  
y Image shown may differ from your TV.  
1
Lift and tilt the TV into its upright position on a table.  
- Leave a 100 mm (minimum) space from the wall for proper  
ventilation.  
The Kensington security system connector is located at the rear of  
the TV. For more information of installation and using, refer to the  
manual provided with the Kensington security system or visit http://  
www.kensington.com. Connect the Kensington security system cable  
between the TV and a table.  
100 mm  
100 mm  
100 mm  
100 mm  
NOTE  
2
Connect the AC-DC Adapter and power cord to a wall outlet.  
y The Kensington security system is optional. You can obtain  
additional accessories from most electronics stores.  
CAUTION  
y Do not place the TV near or on sources of heat, as this may result in  
fire or other damage.  
y Please be sure to connect the TV to the AC/DC power adapter before  
connecting the TV’s power plug to a wall power outlet.  
10  
CAUTION  
MOUNTING ON A WALL  
For proper ventilation, allow a clearance of 100 mm on each side and  
from the wall. Detailed installation instructions are available from  
your dealer, see the optional Tilt Wall Mounting Bracket Installation  
and Setup Guide.  
y Must use the enclosed screw in the box. (Depending on model)  
y Disconnect the power first, and then move or install the TV.  
Otherwise electric shock may occur.  
y If you install the TV on a ceiling or slanted wall, it may fall and  
result in severe injury.  
y Use an authorised LG wall mount and contact the local dealer or  
qualified personnel.  
y Do not over tighten the screws as this may cause damage to the TV  
and void your warranty.  
y Use the screws and wall mounts that meet the VESA standard. Any  
damages or injuries by misuse or using an improper accessory are  
not covered by the warranty.  
100 mm  
100 mm  
100 mm  
100 mm  
y Screw length from outer surface of back cover should be under  
8 mm.  
100 mm  
Wall mount Pad  
If you intend to mount the TV to a wall, attach Wall mounting  
interface (optional parts) to the back of the TV.  
When you install the TV using the wall mounting interface (optional  
parts), attach it carefully so it will not drop.  
Back Cover  
1
If you use screw longer than standard, the TV might be damaged  
internally.  
2
If you use improper screw, the product might be damaged and  
drop from mounted position. In this case, LG Electronics is not  
responsible for it.  
Wall mount Pad  
Back Cover  
Standard screw:  
M4 x L10  
Separate purchase (Wall mounting bracket)  
Max.8 mm  
24TQ510S  
24TQ520S  
27TQ615S  
27TQ625S  
Model  
Wall mount (A x B) (mm)  
NOTE  
A
75 x 75  
B
y Use the screws that are listed on the VESA standard screw  
specifications.  
Standard screw  
M4 x L10  
4
y The wall mount kit includes an installation manual and necessary  
parts.  
y The wall mount bracket is optional. You can obtain additional  
accessories from your local dealer.  
Number of screws  
Wall mount bracket  
(optional)  
LSW149  
y The length of screws may differ depending on the wall mount. Be  
sure to use the proper length.  
y For more information, refer to the instructions supplied with the  
wall mount.  
11  
Antenna connection  
CONNECTIONS  
Connect the TV to a wall antenna socket with an RF cable (75 Ω) (Not  
Provided).  
(NOTIFICATIONS)  
y Use a signal splitter to use more than 2 TVs.  
y If the image quality is poor, install a signal amplifier properly to  
improve the image quality.  
y If the image quality is poor with an antenna connected, try to  
realign the antenna in the correct direction.  
y An antenna cable and converter are not supplied.  
Connect various external devices to the TV and switch input modes  
to select an external device. For more information about an external  
device’s connection, refer to the manual supplied with each device.  
Available external devices are: Blu-ray player, HD receivers, DVD  
players, VCRs, audio systems, USB storage devices, PC, gaming  
devices, and other external devices.  
NOTE  
Satellite dish connection  
y The external device connection may differ from the model.  
y Connect external devices to the TV regardless of the order of the  
TV port.  
y If you record a TV program on a Blu-ray/DVD recorder or VCR, make  
sure to connect the TV signal input cable to the TV through a DVD  
recorder or VCR. For more information of recording, refer to the  
manual provided with the connected device.  
(Only satellite models)  
Connect the TV to a satellite dish to a satellite socket with a satellite  
RF cable (75 Ω).  
CI module connection  
(Depending on model)  
y Refer to the external equipment’s manual for operating  
View the encrypted (pay) services in digital TV mode.  
instructions.  
y Check if the CI module is inserted into the COMMON INTERFACE port  
in the right direction. If the module is not inserted properly, this  
can cause damage to the TV and the COMMON INTERFACE port.  
y If you connect a gaming device to the TV, use the cable supplied  
with the gaming device.  
y In PC mode, there may be noise associated with the resolution,  
vertical pattern, contrast or brightness. If noise is present, change  
the PC output to another resolution, change the refresh rate to  
another rate or adjust the brightness and contrast on the [Picture]  
menu until the picture is clear.  
y If the TV does not display any video and audio when CI+ CAM is  
connected, please contact to the Terrestrial/Cable/Satellite Service  
Operator.  
Other connections  
y In PC mode, some resolution settings may not work properly  
depending on the graphics card.  
y When connecting via a wired LAN, it is recommended to use a CAT  
Connect your TV to external devices. For the best picture and audio  
quality, connect the external device and the TV with the HDMI cable.  
Some separate cable is not provided.  
7 cable. (Only when  
port is provided.)  
y USB port supports 0.5 A electric current. If you need more electric  
current in case of HDD, use the separate power adaptor.  
y Ethernet only supports 100 Base-T.  
NOTE  
y Supported HDMI Audio format (Depending on model):  
Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz), PCM  
(32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)  
12  
(Some buttons and services may not be provided depending on  
models or regions.)  
1 To use the button, press and hold for more than 3 seconds.  
REMOTE CONTROL  
The descriptions in this manual are based on the buttons on the  
remote control. Please read this manual carefully and use the TV  
correctly.  
(Power) Turns the TV on or off.  
(Input) Changes the input source.  
To replace batteries, open the battery cover, replace batteries  
(1.5 V AAA) matching the and ends to the label inside the  
compartment, and close the battery cover. To remove the batteries,  
perform the installation actions in reverse.  
(Teletext buttons) These buttons are used for teletext.  
(CC/SUB) Recalls your preferred subtitle in digital mode.  
(Q. Settings) Accesses the Quick Settings.  
Number buttons Enters numbers.  
CAUTION  
1
Accesses the [Quick Help].  
Shows programme guide.  
y Do not mix old and new batteries, as this may damage the remote  
control.  
y The remote control will not be included for all sales market.  
Make sure to point the remote control toward the remote control  
sensor on the TV.  
(More actions) Displays more remote control functions.  
1
Edits QUICK ACCESS.  
- QUICK ACCESS is a feature that allows you to enter a specified app  
or Live TV directly by pressing and holding the number buttons.  
Adjusts the volume level.  
Scrolls through the saved programmes.  
(Mute) Mutes all sounds.  
(Mute)1 Accesses the [Accessibility] menu.  
(Search) Check for recommended content. (Some recommended  
services may not be available in some countries.)  
Search for content such as TV programmes, movies and other videos,  
or perform a web search by entering text in the search bar.  
You can watch TV or LG Channels.  
#
#
#
#
#
#
#
#
13  
#
Streaming Service buttons Connects to the Video Streaming  
Service.  
USER GUIDE  
For more information about this TV, read the USER GUIDE embedded  
in the product. (Depending on model)  
(HOME) Accesses Home menu.  
(HOME)1 Launches the last used apps.  
Navigation buttons (up/down/left/right) Scrolls through menus  
or options.  
y To open the USER GUIDE  
[Support] [User Guide]  
(OK) Selects menus or options and confirms your input.  
(OK)1 Accesses the [Magic Explorer]. When using [TV Guide],  
[Settings], [Sports Alert], or [Art Gallery], press and hold down on  
the text.  
(Back) Returns to the previous level.  
(Exit) Clears on-screen displays and returns to TV viewing.  
,
,
,
,
Control buttons for media contents.  
Accesses the saved programmes list.  
Set the sleep timer.  
(REC) Starts to record and displays record menu. This TV does not  
support recording function.  
,
,
,
These access special functions in some menus.  
14  
MAINTENANCE  
TROUBLESHOOTING  
Cannot control the TV with the remote control.  
Cleaning your TV  
y Check the remote control sensor on the product and try again.  
Clean your TV regularly to keep the best performance and to extend  
the product lifespan.  
y Check if there is any obstacle between the product and the remote  
control.  
y Check if the batteries are still working and properly installed (  
y Make sure to turn the power off and disconnect the power cord and  
to  
,
to ).  
all other cables first.  
No image display and no sound is produced.  
y When the TV is left unattended and unused for a long time,  
disconnect the power cord from the wall outlet to prevent possible  
damage from lightning or power surges.  
y Check if the product is turned on.  
y Check if the power cord is connected to a wall outlet.  
y Check if there is a problem in the wall outlet by connecting other  
products.  
Screen, frame, cabinet and stand  
To remove dust or light dirt, wipe the surface with a dry, clean, and  
soft cloth.  
To remove major dirt, wipe the surface with a soft cloth dampened  
in clean water or a diluted mild detergent. Then wipe immediately  
with a dry cloth.  
The TV turns off suddenly.  
y Check the power control settings. The power supply may be  
interrupted.  
y Check if the auto-off function is activated on the settings related  
time.  
y If there is no signal while the TV is on, the TV will turn off  
automatically after 15 minutes of inactivity.  
When connecting to the PC (HDMI), no signal is detected.  
y Avoid touching the screen at all times, as this may result in damage  
to the screen.  
y Do not push, rub, or hit the screen surface with your fingernail or a  
sharp object, as this may result in scratches and image distortions.  
y Do not use any chemicals as this may damage the product.  
y Do not spray liquid onto the surface. If water enters the TV, it may  
result in fire, electric shock, or malfunction.  
y Turn the TV off/on using the remote control.  
y Reconnect the HDMI cable.  
y Restart the PC with the TV on.  
Power cord  
Remove the accumulated dust or dirt on the power cord regularly.  
Preventing “Image burn” or “Burn-in” on your TV  
screen  
y If a fixed image displays on the TV screen for a long period of time,  
it will be imprinted and become a permanent disfigurement on  
the screen. This is “image burn”or “burn-in”and not covered by  
the warranty.  
y If the aspect ratio of the TV is set to 4:3 for a long period of time,  
image burn may occur on the letterboxed area of the screen.  
y Avoid displaying a fixed image on the TV screen for a long period of  
time (2 or more hours for LCD) to prevent image burn.  
15  
SPECIFICATIONS  
Product specifications may be changed without prior notice due to upgrade of product functions.  
Dimensions (W x D x H) (mm)  
With stand Without stand  
24TQ510S 563.1 x 148.6 x 393.8 563.1 x 58 x 340.9  
Weight (kg)  
Power consumption  
(Outgoing condition) requirement  
Power  
Models  
With stand Without stand  
3.6  
3.3  
3.25  
3.25  
3.5  
28 W  
28 W  
32 W  
32 W  
19 V  
19 V  
19 V  
19 V  
2.0 A  
2.0 A  
2.0 A  
2.0 A  
24TQ520S 563.1 x 150.1 x 367  
27TQ615S 612 x 152.5 x 423.1  
27TQ625S 612 x 150 x 394.8  
563.1 x 58 x 340.9  
612 x 73.9 x 368.5  
612 x 73.9 x 368.5  
3.75  
3.55  
3.5  
Manufacturer: PI  
Model: AD2137S20, AD10530LF  
Manufacturer: Honor  
AC/DC Adapter  
Model: ADS-45FSQ-19 19040EPG-1, ADS-45SQ-19-3 19040E, ADS-45FSN-19 19040GPG  
In: AC 100 – 240 V~ 50/60 Hz  
(Depending on country)  
Out: DC 19 V  
2.1 A  
Operating Temperature  
Operating Humidity  
Storage Temperature  
Storage Humidity  
0 °C to 40 °C  
Less than 80 %  
-20 °C to 60 °C  
Less than 85 %  
Environment condition  
16  
Broadcasting Specifications  
(Depending on country)  
Digital TV  
DVB-S/S2  
DVB-C  
Analogue TV  
PAL/SECAM B/G/I/D/K,  
SECAM L  
Television system  
DVB-T/T2  
DVB-S/S2  
DVB-C  
DVB-T/T2  
VHF III: 174 ~ 230 Mhz  
UHF IV: 470 ~ 606 Mhz  
UHF V: 606 ~ 862 Mhz  
S Band II: 230 ~ 300 Mhz  
S Band III: 300 ~ 470 Mhz  
Programme coverage  
46 ~ 862 Mhz  
950 ~ 2,150 Mhz  
46 ~ 890 Mhz  
Maximum number of storable  
programmes  
6,000  
3,000  
75 Ω  
External antenna impedance  
CI module Size (W x H x D)  
100.0 mm x 55.0 mm x 5.0 mm  
Wireless module specification  
Wireless module (LGSBWAC03) specifications  
Wireless LAN (IEEE 802.11a/b/g/n/ac)  
Frequency Range  
Output Power (Max.)  
18.5 dBm  
2,400 to 2,483.5 MHz  
5,150 to 5,725 MHz  
5,725 to 5,850 MHz  
19.5 dBm  
11.5 dBm  
Bluetooth  
Frequency Range  
Output Power (Max.)  
9 dBm  
2,400 to 2,483.5 MHz  
As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional  
frequency table.  
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the  
body.  
17  
Service  
WARNING! (STABILITY HAZARD)  
A television set may fall, causing serious personal injury or death.  
Many injuries, particularly to children, can be avoided by taking  
simple precautions such as:  
Unplug the monitor from the wall outlet and refer servicing to  
qualified service personnel when:  
y The power cord or plug is damaged or frayed.  
y Liquid has been spilled into the monitor.  
y The monitor has been exposed to rain or water.  
y The monitor does not operate normally following the operating  
instructions. Adjust only those controls that are covered in the  
operating instructions. An improper adjustment of other controls  
may result in damage and often requires extensive work by a  
qualified technician to restore the monitor to normal operation.  
y The monitor has been dropped or the cabinet has been damaged.  
y The monitor exhibits a distinct change in performance.  
y Snapping or popping from the monitor is continuous or frequent  
while the monitor is operating. It is normal for some monitors to  
make occasional sounds when being turned on or off, or when  
changing video modes.  
-
-
-
-
-
ALWAYS use cabinets or stands or mounting methods  
recommended by the manufacturer of the television set.  
ALWAYS use furniture that can safely support the television  
set.  
ALWAYS ensure the television set is not overhanging the edge  
of the supporting furniture.  
ALWAYS educate children about the dangers of climbing on  
furniture to reach the television set or its controls.  
ALWAYS route cords and cables connected to your television so  
they cannot be tripped over, pulled or grabbed.  
NEVER place a television set in an unstable location.  
NEVER place the television set on tall furniture (for example,  
cupboards or bookcases) without anchoring both the furniture  
and the television set to a suitable support.  
-
-
-
-
NEVER place the television set on cloth or other materials that  
may be located between the television set and supporting  
furniture.  
NEVER place items that might tempt children to climb, such  
as toys and remote controls, on the top of the television or  
furniture on which the television is placed.  
Do not attempt to service the monitor yourself, as opening or  
removing covers may expose you to dangerous voltage or other  
hazards. Refer all servicing to qualified service personnel.  
If the existing television set is going to be retained and relocated,  
the same considerations as above should be applied.  
Symbols  
Refers to alternating current (AC).  
Refers to direct current (DC).  
Refers to class II equipment.  
Refers to stand-by.  
Refers to “ON”(power).  
Refers to dangerous voltage.  
18  
The model and serial number of the product are located on the back  
and on one side of the product.  
Record them below in case you ever need service.  
Model  
Serial No.  

Sharp Air Cleaner Fp A40u User Manual
Panasonic Cwc52ru User Manual
Olympus Digital Bcm 1 User Manual
Mitsubishi Electronics Mitsubishi Digital Electronics Air Conditioner R410a User Manual
MCCULLOCH ROB S400 02 User Manual
MAYTAG WM277B User Manual
LG 17HK701G W User Manual
JVC C 13310 User Manual
BROTHER HL L2370DW 02 User Manual
BLACK DECKER GSL75 User Manual