OWNER’S MANUAL
LED LCD MONITOR
(LED Monitor*)
* LG LED Monitor applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and
retain it for future reference.
24BP450S
24BP450Y
27BP450Y
Copyright © 2021 LG Electronics Inc. All Rights Reserved.
NOTE
ASSEMBLING AND PREPARING
•
•
The components may look different from those illustrated here.
Without prior notice, all product information and specifications contained in this manual are subject to change
to improve the performance of the product.
CAUTION
•
•
To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer
from which you purchased the product.
The power cord provided may differ depending upon the region.
•
•
•
•
•
•
Always use genuine LG components to ensure safety and product performance.
The product warranty will not cover damage or injury caused by the use of unauthorized components.
It is recommended that use the supplied components.
If you use generic cables not certified by LG, the screen may not display or there may be image noises.
Illustrations in this document represent typical procedures, so they may look different from the actual product.
Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing
so may damage the product.)
Supported Drivers and Software
•
•
•
Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand
and could result in personal injury.
When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen
may cause damage to it.
Drivers and Software
Monitor Driver
Installation Priority
Recommended
Recommended
OnScreen Control
3
Product and Button Description
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or
damaged and to ensure safe transportation, regardless of its shape or size.
•
•
•
•
•
•
Place the monitor in the original box or packing material before attempting to move it.
Before moving or lifting the monitor, disconnect the power cord and all other cables.
Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
When holding the monitor, the screen should face away from you to prevent it from being scratched.
When transporting the monitor, do not expose the monitor to shock or excessive vibration.
When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.
Joystick Button
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right/up/
down with your finger.
Basic Functions
CAUTION
Press the joystick button once with your finger
to turn on the monitor.
Power on
•
Avoid touching the monitor screen as much as possible.
- This may result in damage to the screen or some of the pixels used to create images.
Press and hold the joystick button once more
Power off
than 3 seconds with your finger to turn off the
monitor.
You can control the volume by moving the
joystick button left/right.(for HDMI/DP only)
/
Volume control
•
If you use the monitor panel without the stand base, its joystick button may cause the monitor to become
unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick
button to malfunction.
NOTE
The joystick button is located at the bottom of the monitor.
•
4
Installing on a Table
Adjusting the Stand Height
•
Lift the monitor and place it on the table in an upright position. Place the monitor at least 100 mm away from
the wall to ensure sufficient ventilation.
1
2
Place the monitor mounted on the stand base in an upright position.
Handle the monitor with both hands for safety.
Max. 130.0 mm
100 mm
100 mm
100 mm
100 mm
WARNING
•
When adjusting the screen height, do not place your hand on the stand body to avoid injury to your fingers.
CAUTION
•
•
Unplug the power cord before moving or installing the monitor. There is risk of electric shock.
Make sure to use the power cord that is provided in the product package and connect it to a grounded power
outlet.
•
If you need another power cord, please contact your local dealer or the nearest retail store.
5
Adjusting the Angle
Pivot Feature
1
2
Place the monitor mounted on the stand base in an upright position.
Adjust the angle of the screen.
The angle of the screen can be adjusted forward or backward from -5° to 35° for a comfortable viewing
experience.
The pivot feature allows the monitor to rotate 90° clockwise.
Head
WARNING
•
•
To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as
illustrated below.
Be careful not to touch or press the screen area when adjusting the angle of the monitor.
Stand
Swivel stand
Image shown may differ from your Monitor set.
1
Swivel 355 degrees and adjust the angle of the Monitor set to suit your view.
6
Using the Kensington Lock
Installing the Wall Mount Plate
The Kensington security system connector is located at the back of the Monitor set.
This monitor meets the specifications for the wall mount plate or other compatible devices.
For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website
NOTE
•
•
•
The wall mount plate is sold separately.
For more information on installation, refer to the wall mount plate’s installation guide.
Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the
screen.
Connect the monitor to a table using the Kensington security system cable.
•
Remove the stand before installing the monitor on a wall mount by performing the stand attachment in
reverse.
Installing on the Wall
Install the monitor at least 100 mm away from the wall and leave about 100 mm of space at each side of the
monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail
store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.
100 mm
100 mm
100 mm
NOTE
•
The Kensington security system is optional. You can obtain optional accessories from most electronics stores.
100 mm
7
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
CAUTION
•
•
Unplug the power cord before moving or installing the monitor to avoid electric shock.
Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead
to injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.
Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
Use the wall mounting bracket and screws that conform to VESA standards. Damage caused by the use or
misuse of inappropriate components will not be covered by the product warranty.
Wall Mount (mm)
75 x 75
M4 x L10
4
Standard screw
•
•
•
Number of screws
Wall Mount Plate (Optional)
LSW 149
When measured from the back of the monitor, the length of each installed screw must be 8 mm or less.
Wall Mount Plate
Back of the Monitor
NOTE
•
A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable
for any accidents relating to the use of non-standard screws.
Wall Mount Plate
•
•
•
The wall mount kit includes the installation guide and all necessary parts.
The wall mounting bracket is optional. You can obtain optional accessories from your local dealer.
The length of the screw may differ for each wall mounting bracket. If you use screws longer than the standard
length, it may damage the inside of the product.
For more information, please refer to the user manual for the wall mounting bracket.
Back of the Monitor
Standard screw:
M4 x L10
•
Max. 8 mm
8
HDMI Connection
Transmits digital video and audio signals from your PC to the monitor.
USING THE MONITOR
•
Illustrations in this manual may differ from the actual product.
CAUTION
•
•
Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
Recommended HDMI cable types
- High-Speed HDMI®/TM cable
- High-Speed HDMI®/TM cable with Ethernet
CAUTION
•
•
Do not press the screen for a prolonged time. This may cause image distortion.
Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a PC
screensaver if possible.
When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power
outlet.
•
•
•
•
The monitor may flicker when turned on in an area where the temperature is low. This is normal.
Sometimes red, green, or blue spots may appear on the screen. This is normal.
DisplayPort Connection
Transmits digital video and audio signals from your PC to the monitor.
Connecting to a PC
•
This monitor supports the *Plug and Play feature.
NOTE
* Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure
anything or install any manual drivers.
•
•
There may be no video or audio output depending on the DP (DisplayPort) version of the PC.
If you are using a Mini DisplayPort output graphics card, use a Mini DP to DP (Mini DisplayPort to DisplayPort)
cable or gender that supports DisplayPort1.4. (sold separately)
D-SUB connection
Transmits analog video from your PC to the Monitor set.
NOTE
•
•
When using a D-Sub signal input cable connector for Macintosh
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA
connector on the supplied cable to a 15 pin 2 row connector.
9
Connecting AV Devices
Connecting Peripherals
HDMI Connection
Connecting Headphones
HDMI transmits digital video and audio signals from your AV device to the monitor.
Connect peripherals to the monitor via the headphones port.
NOTE
NOTE
•
•
Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
•
•
Peripheral devices are sold separately.
If you use angled earphones, it may cause a problem with connecting another external device to the monitor.
Therefore, it is recommended to use straight earphones.
•
Recommended HDMI cable types
- High-Speed HDMI®/TM cable
- High-Speed HDMI®/TM cable with Ethernet
Angled
Straight
(Recommend)
•
Depending on the audio settings of the PC and external device, headphones and speaker functions may be
limited.
10
USER SETTINGS
NOTE
•
Your monitor’s OSD (On Screen Display) may differ slightly from that shown in this manual.
Activating the Main Menu
1
2
3
Press the joystick button on the bottom of the monitor.
Move the joystick up/down and left/right to set the options.
Press the joystick button once more to exit the main menu.
Joystick Button
Button
Menu Status
Description
Main menu disabled
Enables the main menu.
Exits the main menu.
Main menu enabled
(Holding down the button more than 3 seconds to turn off the monitor. You can turn off the monitor this way at any time, including when the OSD is on.)
Main menu disabled
Adjusts the monitor volume level.(for HDMI/DP only)
Enters the Input features.
Main menu enabled
Main menu disabled
Main menu enabled
Main menu disabled
Main menu enabled
Main menu disabled
Main menu enabled
Adjusts the monitor volume level.(for HDMI/DP only)
Enters the Settings feature.
Displays the information on the current input.
Turns off the monitor.
Displays the information on the current input.
Enters the Picture Mode feature. (for HDMI/DP only)
11
Main Menu Features
Power Off
Exit
Power Off
Exit
Input
Settings
Input
Settings
Auto Configuration
Picture Mode
(for HDMI/DP only)
(for D-SUB only)
Main Menu
Description
Input
Sets input mode.
Power Off
Settings
Turns off the monitor.
Configures the screen settings.
Sets the picture mode.
Exits the main menu.
Picture Mode
Exit
Auto Configuration
Operate the Auto configuration for optimal display in D-SUB.
12
Menu Settings
1
2
3
4
To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Settings.
Move the joystick up/down and left/right to set the options.
To return to the upper menu or set other menu items, move the joystick to or pressing ( ) it.
If you want to exit the OSD menu, move the joystick to until you exit.
24BP450Y
27BP450Y
Quick Settings
Quick Settings
Input
Input
Picture
Picture
General
Sound
24BP450S
General
13
Customizing settings
Quick Settings
Settings > Quick Settings
Brightness
Description
Adjusts the color contrast and brightness of the screen.
Adjusts the volume level.
Contrast
Volume
No
Cancel the select.
Auto Configuration
for 24/27BP450Y only
Yes
Operate the Auto configuration for optimal display in D-SUB.
Input
Settings > Input
Input List
Description
Selects the input mode.
Adjusts the aspect ratio of the screen.
Full Wide
Displays the video in wide-screen, regardless of the video signal input.
Displays video according to the aspect ratio of the video signal input.
Aspect Ratio
Original
NOTE
•
The options may disabled at the recommended resolution (1920 x 1080).
14
Picture
Settings > Picture
Description
Custom
Reader
Photo
Allows the user to adjust each element. The color mode of the main menu can be adjusted.
Optimizes the screen for viewing documents. You can brighten the screen in the OSD menu.
Optimizes the screen to view photos.
Picture Mode
Cinema
Optimizes the screen to improve the visual effects of a video.
This mode is for users who cannot distinguish between red and green. It enables users with color weakness to easily distinguish
between the two colors.
Color Weakness
Game
Optimizes the screen for gameplay.
NOTE
If the Picture Mode is changed, the screen may flicker or the resolution of your PC screen may be affected.
This is subsidiary for color weakness user. Therefore if you feel uncomfortable with the screen, please turn off this function.
This function can’t distinguish some colors in some images.
•
•
•
15
Settings > Picture
Description
Adjusts the brightness of the screen.
Brightness
Contrast
Adjusts the contrast of the screen.
Adjusts the sharpness of the screen.
Sharpness
Off
Select this option for everyday viewing. SUPER RESOLUTION+ is turned off in this mode.
Optimized picture quality is displayed when a user wants crystal clear images. It is effective for high
quality video or game.
High
The optimized picture quality is displayed when a user wants images between low and high modes
for comfortable viewing. It is effective for UCC or SD video.
Middle
Low
SUPER RESOLUTION+
The optimized picture quality is displayed when a user wants smooth and natural images. It is
effective for slow-moving pictures or still images.
Picture Adjust
NOTE
•
Because this is a function to increase the sharpness of low resolution pictures, it is not recommended to use the function for
normal text or for desktop icons. Doing so may result in unnecessarily high sharpness.
Sets the offset level (for HDMI only).
Offset: as a reference for a video signal, this is the darkest color the monitor can display.
•
Black Level
DFC
High
Low
On
Keeps the current contrast ratio of the screen.
Lowers the black levels and raises the white levels from the current contrast ratio of the screen.
Adjusts the brightness automatically according to the screen.
Disables the DFC feature.
Off
16
Sets a response time for displayed pictures based on the speed of the screen.
For a normal environment, it is recommended that you use Fast.
For a fast-moving picture, it is recommended that you use Faster.
Once Faster Mode is selected, Motion Blur may occur depending on the content.
Response Time
Faster
Fast
Sets the response time to faster.
Sets the response time to fast.
Normal
Off
Sets the response time to normal.
Does not use the response time improvement feature.
Game Adjust
You can control the black contrast to have better visibility in dark scenes.
Increasing the Black Stabilizer value brightens the low gray level area on the screen. (You can easily distinguish objects on dark
game screens.)
Reducing the Black Stabilizer value darkens the low gray level area and increases the dynamic contrast on the screen.
Black Stabilizer
Crosshair
Crosshair provides a mark on the center of the screen for First Person Shooter (FPS) games. Users can select the Crosshair that fits
their gaming environment among four different cross hairs.
17
Mode 1, Mode 2,
Mode 3
The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the
lighter the image becomes.
Gamma
Mode 4
If you do not need to adjust the gamma settings, select Mode 4.
Selects the factory default picture color.
Custom: The user can adjust it to red, green or blue by customization.
Warm: Sets the screen color to a reddish tone.
Medium: Sets the screen color between a red and blue tone.
Cool: Sets the screen color to a bluish tone.
Color Temp
Color Adjust
Red
Green
You can customize the picture color using Red, Green, and Blue colors.
Blue
Horizontal
To move image left and right.
Vertical
Clock
To move image up and down.
Configuration Adjust
(D-SUB only)
To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change.
To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.
Phase
User can set the desired resolution.This option is enabled only when the screen resolution on your computer is set to the following(D-SUB only).
NOTE
•
The function is enabled only when the screen resolution on your computer is set to the following, except that the PC output wrong resolution.
Resolution
(D-SUB only)
1024 x 768, 1280 x 768, 1360 x 768, 1366 x 768, Off
1280 x 960, 1600 x 900, Off
1440 x 900, 1600 x 900, Off
No
Cancel the select.
Picture Reset
Do you want to reset your settings?
Yes
Returns to the default settings.
18
Sound
24BP450S
Settings > Sound
Volume
Description
Description
To adjust the Volume of headphone or speaker.
General
Settings > General
Language
To choose the language in which the control names are displayed.
High
Low
Off
Enables SMART ENERGY SAVING you can save energy with this energy- high efficient.
Enables SMART ENERGY SAVING you can save energy with this energy- low efficient.
Disables SMART ENERGY SAVING .
SMART ENERGY SAVING
Automatic Standby
* SMART ENERGY SAVING : Conserve energy by using luminance compensation algorithm.
Feature that automatically turns off the monitor when there is no movement on the screen for a period of time. You can set a timer for the auto-off function. (8H, 6H, 4H and Off)
Prevents incorrect key input.
On
Key input is disabled.
OSD Lock
NOTE
All function except for the OSD Lock mode, brightness, Contrast, Input, Information and Volume are disabled.
Off Key input is enabled.
The display information will be shown the Model, Total Power On Time, Serial Number, Resolution.
•
Information
Reset
No
Cancel the select.
Do you want to reset your settings?
Yes
Returns to the default settings.
NOTE
•
•
The value of energy saving data may differ depending on panel and panel suppliers.
If you select the option of SMART ENERGY SAVING is High or Low, monitor luminance become lower or higher depend on source.
19
TROUBLESHOOTING
Check the following before calling for service.
No image appears
Is the power cord of the display connected?
•
•
Check and see if the power cord is connected properly to the power outlet.
Do you see an "Out of Range" message on the screen?
This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this
manual and configure your display again.
Do you see a "NO SIGNAL" message on the screen?
•
•
After the monitor is on "NO SIGNAL", the monitor goes to DPM mode.
This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it.
Can 't you control some functions in OSD?
Can't you select some menu in OSD?
•
You can unlock the OSD controls at any time by entering the OSD lock menu and changing items to off.
CAUTION
•
•
•
Check Control Panel ► Display ► Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card
manufacturer.
Display image is incorrect
The screen color is mono or abnormal.
•
•
•
•
Check if the signal cable is properly connected and use a screwdriver to fasten if necessary.
Make sure the video card is properly inserted in the slot.
Set the color setting higher than 24 bits (true color) at Control Panel ► Settings.
Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.
The screen blinks.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display driver?
•
•
Make sure to check if the video card supports Plug&Play function.
The screen is flickering.
Did you select the recommended resolution?
•
If the selected resolution is HDMI 1080i 60/50 Hz, the screen may be flickering. Change the resolution to the recommended resolution 1080P.
20
PRODUCT SPECIFICATION
24BP450Y 24BP450S
Color Depth
8-bit color is supported.
1920 x 1080 @ 75 Hz (HDMI/DP)
1920 x 1080 @ 60 Hz (D-Sub)
Max Resolution
Resolution
Recommended Resolution
Power Rating
1920 x 1080 @ 60 Hz
19 V
1.3 A
On mode: 13.5 W Typ. (ENERGY STAR® standard)*(24BP450S)
On mode: 13.2 W Typ. (ENERGY STAR® standard)*(24BP450Y)
Sleep Mode (Standby Mode) ≤ 0.3 W **
Power Sources
Power Consumption
Off Mode ≤ 0.3 W
Type ADS-25SFA-19-3 19025E, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type AD10560LF, manufactured by PI Electronics (H.K.) Ltd.,
AC/DC adaptor
Output: 19 V
1.3 A
Operating Conditions
Temperature
Humidity
0 °C to 40 °C
Less than 80 %
-20 °C to 60 °C
Less than 85 %
Environmental Conditions
Storing Conditions
Temperature
Humidity
Monitor Size (Width x Height x Depth)
With Stand
539.9 x 506 x 249.5 (mm)
539.9 x 321.4 x 56.2 (mm)
4.3 kg
Dimensions
Without Stand
With Stand
Weight (Without Packaging)
Without Stand
2.3 kg
Specifications are subject to change without notice.
The ~ symbol means alternating current, and the symbol
means direct current.
The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).
21
PRODUCT SPECIFICATION
27BP450Y
Color Depth
8-bit color is supported.
1920 x 1080 @ 75 Hz (HDMI/DP)
1920 x 1080 @ 60 Hz (D-Sub)
Max Resolution
Resolution
Recommended Resolution
Power Rating
1920 x 1080 @ 60 Hz
19 V
1.3 A
On mode: 14.5 W Typ. (ENERGY STAR® standard)*
Sleep Mode (Standby Mode) ≤ 0.3 W **
Off Mode ≤ 0.3 W
Power Sources
AC/DC adaptor
Power Consumption
Type ADS-25SFA-19-3 19025E, manufactured by SHENZHEN HONOR ELECTRONIC,
or Type AD10560LF, manufactured by PI Electronics (H.K.) Ltd.,
Output: 19 V
1.3 A
Operating Conditions
Temperature
Humidity
0 °C to 40 °C
Less than 80 %
-20 °C to 60 °C
Less than 85 %
Environmental Conditions
Dimensions
Storing Conditions
Temperature
Humidity
Monitor Size (Width x Height x Depth)
With Stand
612 x 526.4 x 249.5 (mm)
612 x 362.5 x 56.2 (mm)
5.1 kg
Without Stand
With Stand
Weight (Without Packaging)
Without Stand
3.1 kg
Specifications are subject to change without notice.
The ~ symbol means alternating current, and the symbol
means direct current.
The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
** The monitor goes to the Sleep Mode in a couple of minutes(Max 5 minutes).
22
Factory Support Mode (Preset Mode, PC)
D-SUB
Preset Mode
Horizontal Frequency (kHz)
Vertical Frequency (Hz)
Polarity (H/V)
Remarks
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
31.468
31.469
37.5
70.08
59.94
75
-/+
-/-
-/-
37.879
46.875
48.363
60.023
60.317
75
+/+
+/+
-/-
60
75.029
+/+
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1920 x 1080
67.500
63.981
79.976
65.290
67.500
75
+/+
+/+
+/+
-/+
60.023
75.035
59.954
60
+/+
Recommend Mode
23
HDMI/DisplayPort
Preset Mode
Horizontal Frequency (kHz)
Vertical Frequency (Hz)
Polarity (H/V)
Remarks
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
31.468
31.469
37.5
70.08
59.94
75
-/+
-/-
-/-
37.879
46.875
48.363
60.023
67.500
63.981
60.317
75
+/+
+/+
-/-
60
75.029
75
+/+
+/+
+/+
60.023
1280 x 1024
1680 x 1050
1920 x 1080
1920 x 1080
79.976
65.290
67.500
83.89
75.035
59.954
60
+/+
-/+
+/+
+/+
Recommend Mode
74.97
24
HDMI Timing (Video)
Factory support mode
Horizontal Frequency(kHz)
Vertical Frequency(Hz)
HDMI
(Preset Mode)
480P
576P
720P
720P
31.50
31.25
37.50
45.00
60
50
50
60
O
O
O
O
1080P
1080P
56.25
67.50
50
60
O
O
Recommend Mode
25
This Product qualifies for ENERGY STAR®
Changing the factory default configuration and settings or enabling certain optional features
and functionalities may increase energy consumption beyond the limits required for ENERGY
The model and serial number of the product are located on the back and on one side of the product.
Record them below in case you ever need service.
STAR®certification.
Model
Refer to ENERGYSTAR.gov for more information on the ENERGY STAR®program.
Serial No.
|