JENSEN JMS3 User Manual

JMS3

Owner’s Manual

JMS3

INTRODUCTION

Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow.

If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen receiver for maximum

enjoyment.

Features



Waterproof iPx6

UV and Corrosion Resistant

Dimmable Backlit LCD Control

AM/FM Tuner (US/ EURO)

24 Programmable Presets (12 AM, 12 FM)

Weather Band Tuner

Electronic Bass, Treble, Balance and Fader Controls

USB MP3/WMA Player

Rear Auxiliary Audio Input (RCA)

Rear Auxiliary Audio Output (RCA)

4-Channel Amplified Audio Output

Bluetooth (Supports A2DP and AVRCP)

Box Content



JMS3 Radio

Radio Mounting Bracket

Screw Posts (x2)

Locking Hex Nuts (x2)

Washers (x2)

Compliance with FCC Rules

Compliance with FCC Rules (U.S.A. Only)

This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against Harmful interference in a residential installation. This

equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful Interference to radio communications.

FCC WARNING



Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.



Proper connections must be used for connection to a host computer and/or peripherals in order to meet FCC emission

limits.

JMS3

Safety Information

When Boating

Keep the volume level low enough to be aware of your surroundings.

Protect from Water

Do not submerge the product in water, as this can cause electric shorts, fire or other damage.

Protect from the Elements

Use the included cover to protect the wired commander from sunlight, dust, and water while not in use.

Protect from High Temperatures

Do not mount radio within close proximity of engine compartment.

Use the Proper Power Supply

This product is designed to operate with a 12 volt DC negative ground battery system.

CAUTION:

DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF. PLEASE REFER SERVICING TO A QUALIFIED

TECHNICIAN.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND INTERFERENCE, USE ONLY THE RECOMMENDED

ACCESSORIES.

JMS3

INSTALLATION

Mounting the Radio

Choose a mounting location on the dash board or instrument panel that will allow room behind to run radio cables to the

power source. Consider how you will use the AUX IN, LINE OUT and USB connectors and route the appropriate extension

cables to an accessible area.

Cut a hole in the dash board using the template provided in the back of this manual. At least 3 ¾” depth is needed to mount

the radio.

IMPORTANT! Do not mount this unit where it can be submerged in water.

Slide the included spring washers (B) over the screw posts (A) and attach the screw posts to the back of the radio.

Place the radio in front of the dashboard opening so the wiring can be brought through the opening.

After completing the wiring connections, turn the radio on to confirm operation (vessel accessory switch must be on). If the

radio does not operate, recheck all wiring until the problem is corrected. Once proper operation is achieved, turn the

accessory switch off and proceed with final mounting of the radio. Refer to the “Wiring Diagram” on page 4.

NOTE: Before final installation, test the wiring connections to make sure the unit is connected properly and the system

works.

Insert the radio into the mounting hole.

Place the “U” bracket (C) over the screw posts and secure the radio to the dash using the included hex nuts (D). If

necessary, cut the score marks (E) on either side of the mounting bracket to custom fit the bracket length for your

application. See Figure A.

Figure A - Installation

Auxiliary Input

Connect a portable audio device to the Audio Input (AUX IN RIGHT/LEFT) on the back of the unit using RCA cables.

Line Output

The Line Out connectors (LINE OUT RIGHT/LEFT) on the back of the unit output a line-level analog signal. Use this output to

connect to an external amplifier.

JMS3

Wiring Diagram

WIRE COLOR

PURPLE

DESCRIPTION

RIGHT REAR SPEAKER (+)

RIGHT REAR SPEAKER ()

RIGHT FRONT SPEAKER (+)

RIGHT FRONT SPEAKER ()

LEFT FRONT SPEAKER (+)

LEFT FRONT SPEAKER ()

LEFT REAR SPEAKER (+)

LEFT REAR SPEAKER ()

ACC +12V

PURPLE/ BLACK

GRAY

GRAY/ BLACK

WHITE

Note: Do not connect the red wire to a

constant power connection. The red wire

should be connected to a vessel connection

with switched power such as IGN or ACC.

WHITE/ BLACK

GREEN

GREEN/ BLACK

RED

BLACK

GROUND

BLUE

POWER AMP REMOTE

JMS3

OPERATION

Basic Functions

Power

Press the

power button (1) to turn the unit on.

Press and hold the

power button (1) to enter standby mode.

Volume

Press the

button (10) to increase the volume.

button (2) to decrease the volume.

Press and hold either button to change the volume level continuously.

Pause/ Mute

Press the

level.

button (6) to silence the audio output in tuner, AUX or USB mode. Press again to restore the previous volume

Mode

Press the

button (3) to select a mode of operation: AM, FM, WX, Bluetooth, AUX IN and USB.

Dimming Control

Press the

button (1) to turn the dimmer on (Selected brightness level) and press again to turn the dimmer off (maximum

brightness level).

Audio Menu

Press

button (8) to access the audio menu. Press the

button repeatedly to adjust the following audio menu settings:

BASS, TREBLE, BALANCE, FADER and LOUD. Use the

buttons (5, 7) to choose a value for each setting.

System Menu

Press and hold

button (8) to access the system menu. Press the

button (8) once again to adjust the following system

menu settings: BT DEVICE, BT PAIR, DIMMER ON/ OFF, DIMMER LEVEL (0 – 8), REGION (USA/ EURO), PRESET VOLUME

and RESET. Use the

buttons (5, 7) to choose a value for each setting.

Reset

Press the

button to confirm factory default restore. This function will time out after 5 seconds of inactivity and the unit will

resume normal operation. After reset, the unit will default to FM mode.

JMS3

Radio Mode

USA/Europe (EURO) Tuning Mode Selection

To change from USA to European tuning mode, perform the following steps:

Press and hold the

button (8) for 3 seconds to access the system menu.

Press the button (8) repeatedly to cycle through the menu options (DIM > DIM LEVEL > REGION > PRE VOL >

RESET). (The Region setting will display REG USA (if set to USA frequency tuning mode) or REG EUR (if set to European

Frequency mode).

With the display showing the current tuning mode, press the

REG EUR).

buttons (5, 7) to change between (REG USA/

Frequency Tuning

Press the

button (5, 7) to fine tune the radio frequency.

Channel Seek

Press and hold the

buttons (5, 7) to seek strong radio frequencies.

Preset Channel Store

To manually store a favorite channel to one of the twelve preset channels, perform the following steps:

Press the

button (5, 7) to tune to the radio frequency you want to store.

Press and hold the

button (9) to access 12 presents channel list; the favorite icon & channel

flashing at display.

Press the

button (9) repeatedly to select desired favorite preset channel number (1-12).

button (6) to save the station to the chosen preset channel and exit present channel list, the favorite icon will

Press the

stop flashing.

Auto Store

Press and hold the

button (3) to access the tuner menu list (AUTO STORE & PRESET SCAN). Press

button (3)

repeatedly until “AUTO STR” appears on the display. Press the

button (6) to begin the Auto Store function and store the

strongest stations to the preset tuning channels.

NOTE: Only stations detected with sufficient signals will be stored in the preset channel automatically.

Preset Scan

Press and hold the

button (3) to access the tuner menu list (AUTO STORE & PRESET SCAN). Press

button (3)

repeatedly until “PRE SCAN” appears on the display. Press the

button (6) to begin the Preset Scan function and listen the

strongest stations to the preset tuning channels.

Favourite Preset Channel select

Press the

button (9) to select available preset channels.

USB Mode

Insert/Remove USB Device

You can connect a USB device directly to the USB interface at the rear of the radio for playback of compatible files. Playback

begins automatically.

Press the

button (3) to switch to USB mode from another source.

Play/Pause (USB)

During USB playback, press the

Next/Previous File

button (9) to play or pause the selected track.

Press the

button (5, 7) to select the previous or next track.

Track Select

Press and hold the

buttons (9) to access the MP3/WMA track navigate mode.

or button (10, 2) to select the desire track.

Press the volume

Press

button (6) to confirm to playback the track selected.

Fast Forward/Fast Reverse

Press and hold the or

buttons (5, 7) to fast forward or fast reverse.

JMS3

Playback Menu (Repeat/ Random)

Press the

button (9) to select Repeat All, Repeat One and Random playback.

Repeat Play

Repeat One: to continuously repeat the selected track

Repeat All: to repeat all tracks.

Random Play

Random Shuffle: to play all tracks in random, shuffle order

Auxiliary Input Mode

Press the

button (3) repeatedly until auxiliary input mode (AUX IN) is selected from any other modes, when a portable device

is connected to the unit.

JMS3

Bluetooth Operation

The JMS3 includes built-in Bluetooth technology that allows you to connect this unit to Bluetooth devices for streaming audio

playback.

About Bluetooth Technology

Bluetooth is a short-range wireless radio connectivity technology developed as a cable replacement for various electronic

devices. Bluetooth operates in 2.4 GHz frequency range and transmits voice and data at speeds up to 1 megabit per second.

Bluetooth was launched by a special interest group (SIG) comprised of Ericsson Inc., Intel Corp., Nokia Corp., Toshiba and IBM

in 1998, and it is currently developed by nearly 2,000 companies worldwide. The Bluetooth word mark and logos are owned by

the Bluetooth SIG, Inc. and any use of such marks is under license. Other trademarks and trade names are those of their

respective owners.

Bluetooth Menu Options

NOTE: Please note that some Bluetooth menu options are only available while the unit is in Bluetooth Audio mode.

Press and hold the

button (8) to enter the menu adjustment mode. The following additional menu options are available when

the unit is in Bluetooth mode:



BT PAIR: On the PAIR screen press the

button (6) to make pairing available for 120 seconds then connect using your

Bluetooth enabled device

BT DEVICE: Press the

button (6) to view a list of previously paired mobile phone devices. Press the

buttons (5, 7) to view devices in the list. When viewing a specific device press

LOCK/ UNLOCK, CONNECT/ DISCONNECT, and DELETE functions and press

them.

button (6) again to enable the following

buttons (5, 7) to cycle through



CONNECT/ DISCONNECT: To disconnect a paired device, press the

button (6) to temporarily remove the

Bluetooth connection. The connection can be re-established through your phone menu by selecting the JMS3 for

connection or select the phone device name on pairing list through the radio unit and press

select CONNECT for connection.

button (6) and



LOCK/ UNLOCK: The JMS3 can store up to 5 devices for Bluetooth connection. The devices are stored in a FIFO

(First In First Out) order. To prevent a device from being bumped from the list when more than 5 devices are used,

you can lock the device. To Lock/ Unlock a device, press

to change between Lock/ Unlock.

DELETE: Deleting a device removes it from the pairing list. To delete a device from the list, press the

button

(6). To reconnect with a deleted device it must be paired again.

Use

to Navigate

the List

Press

BT Device

Device 1

Device 2

Device 3

Device 4

Device 5

Device 1

Lock/Unlock

Connect/Disconnect

Delete

…

Press

…

Device 5

Lock/Unlock

Connect/Disconnect

Delete

JMS3

Pairing a Bluetooth Device

Before you begin, consult the owner's manual for the Bluetooth device you want to pair with the JMS3.

Make sure the device you intend to pair with is on and ready to pair.

Press the Bluetooth button (4) to enter Bluetooth mode.

Press and hold the Bluetooth button

button to start Bluetooth pairing process.

The JSM3 will display "PAIRING" and will be available to pair for 120 seconds.

In your device Bluetooth settings, select"JMS3" to connect.

Answering a Call

When answering a call using the connected phone, Bluetooth audio playback will pause. After hanging up from the call,

Bluetooth audio will continue on some phones. It may be necessary to press the

playback.

button (6) to resume Bluetooth audio

Bluetooth Audio (A2DP)

Selecting Tracks

During playback, press

Pausing Playback

button (5, 7) to play the previous or next track.

During playback, press

button (6) to pause the Bluetooth audio playback. “PAUSE” will appear on the LCD (10). Press

button (6) again to resume playback. If you change to another mode, playback will automatically pause. Press the

to return to Bluetooth mode and resume audio playback from your Bluetooth enabled device.

button (3)

NOTE: If a Bluetooth device is disconnected due to the power being turned off or if the device goes out of range, the

unit will automatically search for the matching Bluetooth mobile device when the power is restored.

JMS3

TROUBLESHOOTING

Table 1: Troubleshooting

Problem

Solution

No power

If the power supply is connected to the vessel accessory circuits but the engine is not on, switch

the ignition key to “ACC”

Fuse may be blown. Replace with 15 AMP ATO fuse.

Antenna cable not connected; insert antenna cable firmly.

No AM/FM Reception

No sound

Check power; make sure device is on.

Check volume level; increase volume if necessary.

Check power; make sure device is on.

Check device; press the play/pause button to ensure unit is not in Pause mode.

JMS3

SPECIFICATIONS

General

Frequency band(s) (for Bluetooth). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4~2.4835GHz

Maximum radio-frequency power transmitted (for Bluetooth). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 dBm

Power Supply Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC 12 Volts, Negative Ground

Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-16VDC

Unit Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.602” Diameter, 3.465” Deep

Mounting Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . 3.866” Wide, 4.465” Deep

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 lb.

FM Tuner

Tuning Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5 to 107.9 MHz

Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <5μV

Stereo Separation @1 kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >30 dB

AM Tuner

Tuning Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530-1710 KHz

Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <63μV

Amplifier

Max Output Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . 160 Watts Total (40 Watts, 4 Channel)

Output Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Compatible with 4-8 Ohm Speakers, 4 Ohm Load Minimum

Specifications subject to change without notice.

ASA Electronics Corporation

www.asaelectronics.com

www.jensenheavyduty.com

v. 230818

Xerox Color 550 User Manual
Xerox 5750 User Manual
Ryobi 130429004 User Manual
Ricoh Aficio Mp C2000 User Manual
LG DP181BP User Manual
Lexmark S500 User Manual
EMERSON LC220EM1 User Manual
CRAFTSMAN 580.761800 User Manual
CANON POWERSHOT G10 User Manual
ACER EXTENSA 5620Z User Manual