HITACHI CP BX301WN User Manual

Projector  
CP-BX301WN/CP-BW301WN  
User's Manual (detailed)  
Operating Guide  
Thank you for purchasing this projector.  
WARNING ►Before using this product, please read all manuals for this  
product. Be sure to read “Safety Guide” first. After reading them, store them in a  
safe place for future reference.  
About this manual  
Various symbols are used in this manual. The meanings of these symbols are  
described below.  
WARNING This symbol indicates information that, if ignored, could possibly  
result in personal injury or even death due to incorrect handling.  
CAUTION This symbol indicates information that, if ignored, could possibly  
result in personal injury or physical damage due to incorrect  
handling.  
NOTICE  
This entry notices of fear of causing trouble.  
Please refer to the pages written following this symbol.  
NOTE • The information in this manual is subject to change without notice.  
• The illustrations in this manual are for illustrative purposes. They may differ  
slightly from your projector.  
• The manufacturer assumes no responsibility for any errors that may appear in  
this manual.  
• The reproduction, transfer or copy of all or any part of this document is not  
permitted without express written consent.  
1
Introduction  
Introduction  
Features  
The projector provides you with the broad use by the following features.  
ü The unique optics system produces a large projected image in a short  
distance, which provides you with various ways of use.  
ü This projector has a variety of I/O ports that supposedly cover for any  
business scene.  
ü The HDMI port can support various image equipment which have digital  
interface to get clearer pictures on a screen.  
ü Has an HDCR and an ACCENTUALIZER features which are Hitachi's original  
image stabilizer for a clearer image.  
ü This projector can be controlled and monitored via LAN connection.  
Furthermore, you can use the designated USB wireless adapter (optional) to  
establish wireless LAN connection.  
ü The built-in 16W speaker can deliver sufficient sound volume in a large  
space like a classroom without external speakers.  
ü This projector's network supports the PJLink™ standard.PJLink™ is a unified  
standard for operating and controlling data projectors.For specifications of  
PJLink™, see the web site of the PJLink™.  
Equipped with IMAGE OPTIMIZER which is Hitachi's original function to  
maintain visibility by automatic image correction in accordance with lamp  
deterioration.  
ü
Checking the contents of package  
Please see the Contents of package section in the User’s Manual (concise)  
which is a book. Your projector should come with the items shown there. Require  
of your dealer immediately if any items are missing.  
NOTE • Keep the original packing materials, for future reshipment. Be sure  
to use the original packing materials when moving the projector. Use special  
caution for the lens.  
3
Introduction  
Fastening the lens cover  
To avoid losing the cover, please fasten the lens  
cover to the projector using the included strap.  
Lens cover  
Strap hole  
Strap slit  
Fasten the strap to the strap hole as shown  
in the figure for step 1. Please note that the  
knot on the strap is used to fasten it to the  
lens cover in step 2.  
1.  
1
2
Put the strap end into the slit of the lens  
2.  
cover with the knot on the side of the lens.  
Make sure that the strap is inserted to the  
end of the slit.  
Strap  
Insert the upper tab (1 part) of the lens cover  
between the upper case and lens as shown  
in the figure for step 3. Then, fit the right/left  
tabs (2 parts) to attach the lens cover.  
Lens Upper case  
3.  
CAUTION  
►Do not hang the  
lens cover in front of the lens when the  
projector is mounted upside down such as  
when mounted on the ceiling. Otherwise,  
the lens cover may block the light from the  
projector or hit the lens, which may cause  
damage to it. When mounting the projector  
upside down, hang the lens cover on the  
side of the projector or place it on the  
projector. For instance, let the strap put  
through the concave portion around the  
security bar to hang the lens cover (refer  
to the figure).  
3
Upper tab  
Right/Left tabs  
►Be careful not to damage the lens while  
handling the lens cover.  
4
Introduction  
Part names  
Projector  
(2)  
(1)  
HOT!  
(3)  
(4)  
(1) Control panel (6)  
(2) Lamp cover (96)  
The lamp unit is inside.  
(3) Remote sensor (18)  
(4) Lens (101)  
(6)  
(5)  
(7)  
HOT!  
(5) AC (AC inlet) (16)  
(6) Ports (6)  
(7) Exhaust vent  
(13)  
(8) Speaker (13, 22, 50)  
(9) Elevator feet (x 2) (24)  
(10) Spacer (24)  
(16)  
(12)  
(8)  
(11)  
(17)  
(11) Security slot (16)  
(12) Security bar (16)  
(13) Strap hole (4)  
(14) FOCUS ring (25)  
(15) Filter cover (98)  
The air filter and intake  
vent are inside.  
(10)  
(9)  
(14)  
(16) Intake vents  
(17) Battery Cover (100)  
(16)  
(15)  
WARNING HOT! : Do not touch around the lamp cover and the exhaust  
vents during use or just after use, since it is too hot.  
►Do not look into the lens or vent while the lamp is on, since the projection ray  
may cause a trouble on your eyes.  
►Do not use the security bar and slot to prevent the projector from falling down,  
since it is not designed for it.  
►Keep any object away from concentrated projection light beam. Blocking the  
beam by something causes high temperature and could result in fire or smoke.  
CAUTION ►Maintain normal ventilation to prevent the projector from  
heating up. Do not cover, block or plug up the vents. Do not place anything that  
can stick or be sucked to the vents, around the intake vents. Clean the air filter  
periodically.  
5
Introduction  
Part names (continued)  
Control panel  
(1) STANDBY/ON button (20)  
(2) INPUT button (23)  
(4) (5)  
(3) POWER indicator (20, 104)  
(4) TEMP indicator (104)  
(5) LAMP indicator (104)  
Buttons ◄/►/▲/▼  
(6) MENU / Cursor button (30)  
when no menu is displayed (30), or  
Cursor ▲/▼ buttons  
(3)  
(6)  
(1)  
(2)  
when a menu is displayed (30).  
The ◄/►/▲/▼ buttons on the projector work only as the cursor buttons while  
the template is displayed (56).  
Ports (10 ~ 15)  
(1) USB TYPE A port (x2)  
(2) LAN port  
(3) HDMI port (x2)  
(4) USB TYPE B port  
(5) MIC port  
(8) AUDIO OUT (L,R) ports  
(9) COMPUTER IN1 port  
(10) COMPUTER IN2/MONITOR OUT port  
(11) VIDEO IN port  
(12) CONTROL port  
(6) AUDIO IN1 port  
(7) AUDIO IN2(L,R) ports  
(6)  
(1)  
(4)  
(3)  
(9)  
(2)  
(7)  
(11)  
(5) (12) (8)  
(10)  
6
Introduction  
Part names (continued)  
Remote control  
(1) INPUT button (23)  
(2) IWB button *  
(3) CALIBRATION button *  
(4) STANDBY/ON button (20)  
(5) ASPECT button (23)  
(6) AUTO button (25)  
(7) ACCENTUALIZER button (26)  
(8) HDCR button (26)  
(9) D-ZOOM - button (24)  
(10) D-ZOOM + button (24)  
(11) PAGE UP button (19)  
(12) MAGNIFY - ON button (28)  
(13) MY BUTTON - 1 button (60)  
(14) VOLUME + button (22)  
(15) PAGE DOWN button (19)  
(16) MAGNIFY - OFF button (28)  
(17) MY BUTTON - 2 button (60)  
(18) VOLUME - button (22)  
(19) KEYSTONE button (27)  
(20) TEMPLATE button (26)  
(21) FREEZE button (29)  
(22) AV MUTE button (22)  
(23) ESC button (30)  
(2)  
(1)  
(6)  
(5)  
(3)  
(4)  
(7)  
(8)  
INPUT  
IWB  
CALIBRATION  
ASPECT  
AUTO  
ACCENTUALIZER HDCR  
D-ZOOM  
(9)  
-
+
(10)  
(14)  
(13)  
(18)  
(17)  
(22)  
(21)  
(24)  
(25)  
(27)  
PAGE  
UP  
VOLUME  
MAGNIFY  
ON  
MYBUTTON  
1
(11)  
(12)  
(15)  
(16)  
(19)  
(20)  
(23)  
(28)  
(26)  
2
DOWN  
OFF  
KEYSTONE  
ESC  
TEMPLATE  
FREEZE  
AV MUTE  
MENU  
ENTER  
POSITION  
RESET  
(29)  
(24) MENU button (30, 31)  
(25) ENTER button (30, 31)  
(26) POSITION button (27, 31)  
(27) RESET button (30)  
(28) ▲/▼/◄/► cursor buttons (30)  
(29) Battery cover (17)  
Back of  
the remote control  
• Any button marked with “*” is not supported on this projector (103).  
NOTE  
7
Setting up  
Setting up  
Install the projector according to the environment and manner the projector will be  
used in.  
Arrangement  
Refer to table T-1 or T-2 and figures F-1 and F-2 at the end of User’s Manual (concise) to  
determine the screen size and projection distance.  
The values shown in the table are calculated for a full size screen.  
a
b
c1 c2  
Screen height (±8%)  
Screen size (diagonal)  
Projection distance (±8%)  
,
• For the case of installation in special conditions such as on the wall or ceiling, the  
specified mounting accessories and service may be required. Tabletop use must be  
setup with the designated optional accessories. Before installing the projector, consult  
your dealer about your installation.  
The screen position may shift after installation if the projector is mounted on locations  
such as the wall or ceiling, due to the flexibility of the plastic projector body. If readjustment  
is necessary, consult with your dealer or service personnel.  
• The projected image position and/or focus may change during warm-up (approx. 30  
minutes after the lamp is turned on) or when the ambient conditions change. Readjust  
the image position and/or focus as necessary.  
• Since the projector features an ultra short throw, be aware that it is required to select a  
screen carefully to have better performance.  
- A soft screen such as a pull-down screen may cause serious distortion of a projected  
image. A hard screen such as a board screen is recommended for use with this  
projector.  
- A high-gain screen such as a bead screen that has narrow viewing angle is not suitable  
for this projector. A low-gain screen (around 1.0) such as a matte screen that has wide  
viewing angle is recommended for use with this projector.  
-
A screen with a weave pattern may cause moiré on the projected image, which is not a  
failure of the projector. A screen that has less moiré effects is recommended for use with this  
projector.  
WARNING Place the projector in a stable horizontal position. If the  
projector falls or is knocked over, it could cause injury and/or damage to the  
projector. Using a damaged projector could then result in fire and/or electric shock.  
• Do not place the projector on an unstable, slanted or vibrational surface such  
as a wobbly or inclined stand.  
• Do not place the projector on its side or front position. To place the projector  
on its rear position for the table top use, it is required to use the designated  
optional parts. Consult with your dealer.  
• Consult with your dealer before a special installation such as on the wall or  
ceiling.  
(continued on next page)  
8
Setting up  
Arrangement (continued)  
►Place the projector in a cool place, and ensure that there is  
sufficient ventilation. The high temperature of the projector could  
WARNING  
cause fire, burns and/or malfunction of the projector.  
• Do not stop-up, block or otherwise cover the projector's vents.  
• Keep a space of 30 cm or more between the sides of the projector and other  
objects such as walls.  
• Do not place or attach anything that would block the projection window or vent  
holes.  
• Do not place the projector on metallic thing or anything weak in heat.  
• Do not place the projector on carpet, cushions or bedding.  
• Do not place the projector in direct sunlight or near hot objects such as heaters.  
Do not place the projector where the air from an air conditioner or similar unit  
will blow on it directly.  
Do not place anything near the projection window or vents, or on top of the  
projector.  
Do not place anything that may be sucked into or stick to the vents on the  
bottom of the projector. This projector has some intake vents also on the bottom.  
►Do not place the projector anyplace where it may get wet. Getting the projector  
wet or inserting liquid into the projector could cause fire, electric shock and/or  
malfunction of the projector.  
• Do not place the projector in a bathroom or the outdoors.  
• Do not place anything containing liquid near the projector.  
Do not place the projector where any oils, such as cooking or machine oil, are used.  
Use only the mounting accessories the manufacturer specified, and leave installing  
and removing the projector with the mounting accessories to the service personnel.  
• Read and keep the user’s manual of the mounting accessories used.  
CAUTION ►Avoid placing the projector in smoky, humid or dusty place.  
Placing the projector in such places could cause fire, electric shock and/or  
malfunction of the projector.  
• Do not place the projector near humidifiers, smoking spaces or a kitchen. Also  
do not use an ultrasonic humidifier near the projector. Otherwise chlorine and  
minerals contained in tap water are atomized and could be deposited in the  
projector causing image degradation or other problems.  
Position the projector to prevent light from directly hitting the projector's remote sensor.  
►Do not place the product in a place where radio interference may be caused.  
►Do not place this product in a magnetic field.  
If the projector is used at an altitude of about 1600 m or higher, set ALTITUDE  
of the SERVICE item in the OPTION menu to HIGH (64). Otherwise, set it to  
NORMAL.  
If the projector is used with a wrong setting, it may cause damage to the projector  
itself or the parts inside.  
(continued on next page)  
9
Setting up  
Arrangement (continued)  
NOTE  
• The projector may make a rattling sound when tilted, moved or  
shaken, since a flap to control the air flow inside of the projector has moved. Be  
aware that this is not a failure or malfunction.  
• The incoming light to the screen from the projector has a large angle. While  
the white image is on the screen, you may see it with colors, but this is because  
of the type of the screen used or the angles viewed, and it is not a malfunction.  
• When the ambient temperature is around 35 to 40°C, the brightness of lamp  
is reduced automatically.  
Connecting with your devices  
Before connecting the projector to a device, consult the manual of the device to  
confirm that the device is suitable for connecting with this projector and prepare  
the required accessories, such as a cable in accord with the signal of the device.  
Consult your dealer when the required accessory did not come with the product or  
the accessory is damaged.  
After making sure that the device and projector are turned off, connect them  
following the instructions below.  
WARNING Use only the appropriate accessories. Otherwise it could cause  
a fire or damage to the device and the projector.  
- Use only the accessories specified or recommended by the projector’s  
manufacturer. Consult your dealer when the required accessory did not come  
with the product or the accessory is damaged. It may be regulated under some  
standard.  
- For a cable with a core at only one end, connect the end with the core to the  
projector. That may be required by EMI regulations.  
- Neither disassemble nor modify the projector and the accessories.  
- Do not use the damaged accessory. Be careful not to damage the accessories.  
Route a cable so that it is neither stepped on nor pinched out.  
CAUTION ►Do not turn on or off the projector while connected to a device  
in operation, unless that is directed in the manual of the device. Otherwise it may  
cause malfunction in the device or projector.  
►Be careful not to mistakenly connect a connector to a wrong port. Otherwise it  
may cause malfunction in the device or projector.  
- When connecting a connector to a port, make sure that the shape of the  
connector fits the port.  
- Tighten the screws to connect a connector equipped with screws to a port.  
- Use the cables with straight plugs, not L-shaped ones, as the input ports of the  
projector are recessed.  
(continued on next page)  
10  
Setting up  
Connecting with your devices (continued)  
About Plug-and-Play capability  
• Plug-and-Play is a system composed of a computer, its operating system  
and peripheral equipment (i.e. display devices). This projector is VESA DDC  
2B compatible. Plug-and-Play can be used by connecting this projector to a  
computer that is VESA DDC (display data channel) compatible.  
- Take advantage of this feature by connecting a computer cable to the  
COMPUTER IN1 port (DDC 2B compatible). Plug-and-Play may not work  
properly if any other type of connection is attempted.  
-
Please use the standard drivers in your computer as this projector is a Plug-and-  
Play monitor.  
• When AUTO is selected for the COMPUTER IN1 or COMPUTER IN2 port in  
COMPUTER IN of the INPUT menu, that port will accept component video  
signals (42).  
When the USB TYPE B port and the computer's type A USB port are connected,  
you can use the remote control as a simple mouse and keyboard of the computer.  
(19).  
Computer  
VCR/DVD/Blu-ray Disc  
player  
(continued on next page)  
11  
Setting up  
Connecting with your devices (continued)  
NOTE • Before connecting the projector to a computer, consult the computer’s  
manual and check the compatibility of the signal level, the synchronization  
methods and the display resolution output to the projector.  
- Some signal may need an adapter to input this projector.  
- Some computers have multiple screen display modes that may include some  
signals which are not supported by this projector.  
- Although the projector can display signals with resolution up to UXGA  
(1600X1200), the signal will be converted to the projector’s panel resolution  
before being displayed. The best display performance will be achieved if the  
resolutions of the input signal and the projector panel are identical.  
• If you connect this projector and a notebook computer, you need output the  
display to an external monitor, or output simultaneously to the internal display  
and an external monitor. Consult the computer's manual for the setting.  
• Depending on the input signal, the automatic adjustment function of this  
projector may take some time and not function correctly.  
- Note that a composite sync signal or sync-on-green signal may confuse the  
automatic adjustment function of this projector (42).  
- If the automatic adjustment function does not work correctly, you may not see  
the dialog to set the display resolution. In such a case, use an external display  
device. You may be able to see the dialog and set an appropriate display  
resolution.  
(continued on next page)  
12  
Setting up  
Connecting with your devices (continued)  
• If you insert a USB storage device, such as a USB memory, into the USB TYPE  
A port and select the port as the input source, you can view images stored in the  
device (78).  
You can connect a dynamic microphone to the MIC port with a 3.5 mm mini-plug.  
In that case, the built-in speaker outputs the sound from the microphone, even  
while the sound from the projector is output. You can input line level signal to the  
MIC port from equipment such as wireless microphone. In the normal mode, the  
volume of the microphone can be adjusted separately from the volume of the  
projector using the menu. (51)  
In the standby mode, the volume of the microphone is adjustable with the  
VOLUME +/- buttons on the remote control, in synchronization with the volume of  
the projector. (22)  
Even when the sound of projector is set to mute mode by the AUDIO SOURCE  
function (50), the volume of the microphone is adjustable.  
In both modes (standby or normal), the AV MUTE button on the remote control  
works on the sounds of the microphone and the projector. (22)  
Microphone  
system  
Speakers  
(with an amplifier)  
Monitor  
RGB IN  
R
L
NOTE  
• If a loud feedback noise is produced from the speaker, move the  
microphone away from the speaker.  
• This projector doesn't support plug-in power for the microphone.  
(continued on next page)  
13  
Setting up  
Connecting with your devices (continued)  
To use network functions of the projector, connect the LAN port with the  
computer's LAN port, or with an access point that is connected to the computer  
with wireless LAN, using a LAN cable. To use NETWORK BRIDGE function,  
also connect the CONTROL port and an RS-232C port of the external device to  
communicate as a network terminal. See the User's Manual - Network Guide for  
details of the network functions.  
External  
Access point  
Computer  
Device  
RS-232C  
RS-232C  
LAN  
USB TYPE A  
USB  
wireless  
adapter  
(optional)  
USB storage  
device  
CAUTION  
to obtain the consent of the administrator of the network.  
Do not connect the LAN port to any network that might have the excessive voltage.  
►Before connecting the projector to a network system be sure  
►The designated USB wireless adapter that is sold as an option is required to  
use the wireless network function of this projector.  
►Before removing the USB storage device from the port of the projector, be  
sure to use the REMOVE USB function on the thumbnail screen to secure your  
data (81).  
►Do not use any extension cable or device when connecting the adapter to  
the projector. Before you insert or pull out the USB wireless adapter from the  
projector, turn off the power of the projector and pull out the power cord’s plug  
from the outlet. Do not touch the USB wireless adapter while the projector is  
receiving AC power.  
To connect both the LAN cable and USB device to the projector, use a LAN  
cable that is flat on the side where the plug’s wire is visible. Otherwise, both of  
them cannot be connected correctly, or the wire may break (malfunction).  
(continued on next page)  
14  
Setting up  
Connecting with your devices (continued)  
NOTE • If an oversized USB storage device blocks the LAN port, use a USB  
extension cable to connect the USB storage device.  
• The HDMI port of this model is compatible with HDCP (High-bandwidth Digital  
Content Protection) and therefore capable of displaying a video signal from  
HDCP compatible DVD players or the like.  
- The HDMI supports the following signals.  
Video signal : 480i@60, 480p@60, 576i@50, 576p@50, 720p@50/60,  
1080i@50/60, 1080p@50/60  
Audio signal : Format Linear PCM  
Sampling frequency 48kHz / 44.1kHz / 32kHz  
- This projector can be connected with another equipment that has HDMITM  
connector, but with some equipment the projector may not work properly,  
something like no video.  
- Be sure to use an HDMITM cable that has the HDMITM logo.  
- Use a Category 2-certified HDMITM cable to input 1080p@50/60 signal to the  
projector.  
- When the projector is connected with a device having DVI connector, use a  
DVI to HDMITM cable to connect with the HDMI input.  
• Up to one USB wireless adapter (optional) can be connected to a projector.  
15  
Setting up  
Connecting to a power supply  
Put the connector of the power cord into the  
AC (AC inlet) of the projector.  
1.  
Firmly plug the power cord’s plug into the  
outlet. In a couple of seconds after the  
power supply connection, the POWER  
2.  
indicator will light up in steady orange.  
Please remember that when the DIRECT POWER  
ON function activated (58), the connection of the  
power supply make the projector turn on.  
AC  
Power cord  
WARNING ►Please use extra caution when connecting the power cord, as  
incorrect or faulty connections may result in fire and/or electrical shock.  
• Do not touch the power cord with a wet hand.  
• Only use the power cord that came with the projector. If it is damaged, consult  
your dealer to get a new one. Never modify the power cord.  
• Only plug the power cord into an outlet whose voltage is matched to the power  
cord. The power outlet should be close to the projector and easily accessible.  
Remove the power cord for complete separation.  
• Do not distribute the power supply to multiple devices. Doing so may overload  
the outlet and connectors, loosen the connection, or result in fire, electric shock  
or other accidents.  
• Do not press the main body of projector on the power cord.  
Using the security bar and slot  
Security slot  
A commercial anti-theft chain or wire up to  
10 mm in diameter can be attached to the  
security bar on the projector.  
Also this product has the security slot for  
the Kensington lock.  
For details, see the manual of the security  
Security bar  
tool.  
Anti-theft chain or wire  
WARNING ►Do not use the security bar and slot to prevent the projector  
from falling down, since it is not designed for it.  
CAUTION ►Do not place anti-theft chain or wire near the exhaust vents.  
It may become too hot.  
NOTE • The security bar and slot is not comprehensive theft prevention  
measures. It is intended to be used as supplemental theft prevention measure.  
16  
Remote control  
Remote control  
Installing the batteries  
Please insert the batteries into the remote control before using it. If the remote control  
starts to malfunction, try to replace the batteries. If you will not use the remote control for  
long period, remove the batteries from the remote control and store them in a safe place.  
1. Remove the battery cover.  
Align and insert the two AA batteries (HITACHI MAXELL ,  
Part No.LR6 or R6P) according to their plus and minus  
terminals as indicated in the remote control.  
2.  
3. Put the battery cover back to the former state.  
WARNING ►Always handle the batteries with care and use them only as  
directed. Improper use may result in battery explosion, cracking or leakage,  
which could result in fire, injury and/or pollution of the surrounding environment.  
• Be sure to use only the batteries specified. Do not use batteries of different  
types at the same time. Do not mix a new battery with used one.  
Make sure the plus and minus terminals are correctly aligned when loading a battery.  
• Keep a battery away from children and pets.  
• Do not recharge, short circuit, solder or disassemble a battery.  
Do not place a battery in a fire or water. Keep batteries in a dark, cool and dry place.  
• If you observe battery leakage, wipe out the leakage and then replace a battery.  
If the leakage adheres to your body or clothes, rinse well with water immediately.  
• Obey the local laws on disposing the battery.  
17  
Remote control  
Remote  
sensor  
About the remote control signal  
The remote control works with the projector’s remote  
sensor. This projector has a remote sensor on the front.  
The sensor senses the signal within the following range  
when the sensor is active:  
60 degrees (30 degrees to the left and right of the sensor)  
within 3 meters about.  
30º  
30º  
Approx.  
3 m  
NOTE The remote control signal reflected in the screen or the like may be available.  
If it is difficult to send the signal to the sensor directly, attempt to make the signal reflect.  
• The remote control uses infrared light to send signals to the projector (Class 1  
LED), so be sure to use the remote control in an area free from obstacles that  
could block the remote control’s signal to the projector.  
The remote control may not work correctly if strong light (such as direct sun  
light) or light from an extremely close range (such as from an inverter fluorescent  
lamp) shines on the remote sensor of the projector. Adjust the position of  
projector avoiding those lights.  
Changing the frequency of remote control signal  
The accessory remote control has the two choices on signal  
INPUT  
IWB  
CALIBRATION  
frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote  
control does not function properly, attempt to change the  
signal frequency.  
ASPECT  
AUTO  
ACCENTUALIZER HDCR  
D-ZOOM  
-
+
PAGE  
UP  
VOLUME  
MAGNIFY  
ON  
MYBUTTON  
1
2
DOWN  
OFF  
In order to set the Mode, please keep pressing the  
combination of two buttons listed below simultaneously for  
about 3 seconds.  
(2)  
(1)  
KEYSTONE  
ESC  
TEMPLATE  
FREEZE  
AV MUTE  
MENU  
ENTER  
(1) Set to Mode 1:NORMAL... VOLUME - and RESET buttons  
POSITION  
RESET  
(2) Set to Mode 2:HIGH... MAGNIFY OFF and ESC buttons  
Please remember that the REMOTE FREQ. in the SERVICE  
item of the OPTION menu  
(66) of the projector to be  
controlled should be set to the same mode as the remote  
control.  
18  
Remote control  
Using as a simple PC mouse & keyboard  
The accessory remote control works as a simple mouse  
and keyboard of the computer, when the projector’s USB  
TYPE B port and the computer’s type A USB port are  
connected.  
(1) PAGE UP key: Press PAGE UP button.  
(2) PAGE DOWN key: Press PAGE DOWN button.  
(3) Mouse left button: Press ENTER button.  
(4) Move pointer: Use the cursor buttons ▲, ▼, ◄ and ►.  
(5) ESC key: Press ESC button.  
(6) Mouse right button: Press RESET button.  
INPUT  
IWB  
CALIBRATION  
(1)  
(2)  
ASPECT  
AUTO  
ACCENTUALIZER HDCR  
D-ZOOM  
USB TYPE B  
port  
-
+
PAGE  
UP  
VOLUME  
MAGNIFY  
ON  
MYBUTTON  
1
2
DOWN  
OFF  
KEYSTONE  
ESC  
TEMPLATE  
FREEZE  
AV MUTE  
(5)  
(3)  
(4)  
(6)  
MENU  
►Improper use of the simple mouse & keyboard  
NOTICE  
ENTER  
function could damage your equipment. While using this  
function, please connect this product only to a computer. Be  
sure to check your computer’s manuals before connecting this  
product to the computer.  
POSITION  
RESET  
NOTE  
•When the simple mouse & keyboard function of this product does not work  
correctly, please check the following.  
• When a USB cable connects this projector with a computer having a built-in pointing  
device (e.g. track ball) like a laptop PC, open BIOS setup menu, then select the external  
mouse and disable the built-in pointing device, because the built-in pointing device may  
have priority to this function.  
Windows XP SP3 or higher is required for this function. And also this function may not work  
depending on the computer’s configurations and mouse drivers. This function can work with the  
computer which can operate general USB mouse or keyboard.  
You cannot do things like press two buttons at once (for instance, pressing two buttons  
at the same time to move the mouse pointer diagonally).  
This function is activated only when the projector is working properly. This function is not  
available in any of the following cases:  
- While the lamp is warming up. (The POWER indicator blinks in green.)  
- When either USB TYPE A or USB TYPE B port is selected.  
- While displaying BLANK (22  
- When any menu is displayed on the screen.  
While using the cursor buttons to operate the sound or screen functions such as adjusting the  
), TEMPLATE (56) or MY IMAGE screen.  
-
sound volume, correcting the keystone, correcting the picture position and magnifying the screen.  
19  
Power on/off  
Power on/off  
Turning on the power  
STANDBY/ON button  
POWER indicator  
Make sure that the power cord is firmly  
1.  
and correctly connected to the projector  
and the outlet.  
STANDBY/ON  
INPUT  
MENU  
Make sure that the POWER indicator is  
steady orange (104).Then, remove the  
lens cover.  
LAMP  
2.  
TEMP  
POWER  
Press STANDBY/ON button on the  
projector or the remote control. The  
3.  
projection lamp lights up, and the POWER  
indicator begins to blink green. When the  
power is completely on, the indicator will  
stop blinking and light in steady green  
(104).  
INPUT  
IWB  
CALIBRATION  
ASPECT  
AUTALIZER HDCR  
D-ZOOM  
-
+
MAGNIFY  
ON  
MYBUTTON  
1
VOLUME  
DOWN  
OFF  
2
EYSTONE  
ESC  
TEMPLATE  
FREEZE  
AV MUTE  
MENU  
ENTER  
POSITION  
RESET  
To display the picture, select an input signal according to the section Selecting an  
input signal (23).  
The INITIAL SETTING Menu will be displayed by factory default upon startup.  
Once the INITIAL SETTING Menu is set, it will not appear until FACTORY RESET  
(71) is executed. If you wish to change the settings, refer to the LANGUAGE  
(52) and ALTITUDE (64) menu.  
(1) LANGUAGE: Use the ▲/▼/◄/►  
buttons to select the desired language  
and press the ENTER button of the  
remote control or the INPUT button of  
the projector to execute.  
(2) ALTITUDE: Use the ▲/▼ buttons to  
select NORMAL for altitude below 1600  
m (5250 feet), otherwise select HIGH  
and press the ENTER button of the  
remote control or the INPUT button of  
the projector to execute.  
(continued on next page)  
20  
Power on/off  
Turning off the power  
Press the STANDBY/ON button on the projector or the remote control.  
The message “Power off?” will appear on the screen for about 5 seconds.  
1.  
2.  
Press the STANDBY/ON button again while the message appears.  
The projector lamp will go off, and the POWER indicator will begin blinking in  
orange. Then POWER indicator will stop blinking and light in steady orange  
when the lamp cooling is complete (104).  
Do not turn the projector on for about 10 minutes or more after turning it off.  
Also, do not turn the projector off shortly after turning it on. Such operations might  
cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.  
WARNING ►A strong light is emitted when the projector’s power is on.  
Do not look into the lens of the projector or look inside of the projector through  
any of the projector’s openings, since the projection ray may cause a trouble on  
your eyes.  
►Do not touch around the lamp cover and the exhaust vents during use or just  
after use, since it is too hot.  
►Remove the power cord for complete separation. The power outlet should be  
close to the projector and easily accessible.  
NOTE  
•Turn the power on/off in right order. Please power on the  
projector prior to the connected devices.  
This projector has the function that can make the projector  
automatically turn on/off. Please refer to the DIRECT POWER ON  
(58) and AUTO POWER OFF (59) items of the OPTION menu.  
21  
Operating  
Operating  
VOLUME +/- button  
Adjusting the volume  
INPUT  
IWB  
CALIBRATION  
ASPECT  
AUTO  
ACCENTUALIZER HDCR  
D-ZOOM  
Use the VOLUME +/VOLUME - buttons to adjust the volume.  
-
+
1.  
A dialog will appear on the screen to aid you in adjusting the  
PAGE  
UP  
VOLUME  
MAGNIFY  
ON  
MYBUTTON  
1
volume. If you do not do anything, the dialog will automatically  
disappear after about ten seconds.  
2
DOWN  
OFF  
● When is selected for current picture input port, the volume adjustment is  
disabled. Please see AUDIO SOURCE item of AUDIO menu (50).  
● Even if the projector is in the standby mode, the volume is adjustable when  
both of the following conditions are true:  
- An option other than is selected for STANDBY in the AUDIO SOURCE  
item of the AUDIO menu (50).  
-
NORMAL is selected in the STANDBY MODE item of the SETUP menu (49).  
● In the standby mode, the volume of the microphone is adjustable with the  
VOLUME +/- buttons on the remote control, in synchronization with the volume  
of the projector (11).  
Temporarily turning off the screen and audio output  
AV MUTE button  
INPUT  
IWB  
CALIBRATION  
Press AV MUTE button on the remote control.  
1. The BLANK screen will be displayed instead of the screen of  
ASPECT  
AUTO  
ACCENTUALIZER HDCR  
D-ZOOM  
-
+
input signals and the sound from the AUDIO OUT port will be  
muted. Please refer to the BLANK item in SCREEN menu about  
the BLANK screen (52).  
To exit from the AV MUTE mode and restore the screen and  
audio, press AV MUTE button again.  
PAGE  
UP  
VOLUME  
MAGNIFY  
ON  
MYBUTTON  
1
2
DOWN  
OFF  
KEYSTONE  
ESC  
TEMPLATE  
FREEZE  
AV MUTE  
MENU  
NOTE  
• The projector automatically exits from the AV MUTE mode  
when some control buttons are pressed.  
The audio is output from the external audio system connected to  
the AUDIO OUT port.  
CAUTION  
►If you wish to have a blank screen while the projector's lamp  
is on, use the AV MUTE function above . Taking any other action may cause the  
damage on the projector.  
22  
Operating  
INPUT button  
Selecting an input signal  
INPUT button  
Press INPUT button on the projector.  
STANDBY/ON  
INPUT  
MENU  
1.  
Each time you press the button, the  
projector switches its input port from  
the current port as below.  
LAMP  
INPUT  
IWB  
CALIBRATION  
TEMP  
POWER  
ASPECT  
AUTO  
ACCENTUALIZER HDCR  
D-ZOOM  
-
+
PAGE  
UP  
VOLUME  
MAGNIFY  
ON  
MYBUTTON  
1
COMPUTER IN1 COMPUTER IN2  
VIDEO IN  
LAN  
HDMI  
2
USB TYPE A  
HDMI 1  
USB TYPE B  
While ON is selected for AUTO SEARCH item in OPTION menu (58), the projector  
will keep checking the ports in above order repeatedly till an input signal is detected.  
It may take several seconds to project the images from the USB TYPE B port.  
Selecting an aspect ratio  
ASPECT button  
Press ASPECT button on the remote control.  
Each time you press the button, the projector switches the  
mode for aspect ratio in turn.  
1.  
INPUT  
IWB  
CALIBRATION  
ASPECT  
AUTO  
ACCENTUALIZER HDCR  
For a computer signal  
D-ZOOM  
-
+
NORMAL 4:3 16:9 16:10 NATIVE  
PAGE  
UP  
MAGNIFY  
ON  
MYBUTTON  
1
VOLUME  
2
DOWN  
OFF  
For an HDMITM signal  
KEYSTONE  
TEMPLATE  
FREEZE  
AV MUTE  
NORMAL 4:3 16:9 16:10 14:9 NATIVE  
For a video signal or component video signal  
4:3 16:9 16:10 14:9 NATIVE  
For an input signal from the LAN, USB TYPE A or USB TYPE B port, or  
if there is no signal  
CP-BX301WN: 4:3 (fixed)  
CP-BW301WN: 16:10 (fixed)  
ASPECT button does not work when no proper signal is inputted.  
● NORMAL mode keeps the original aspect ratio setting.  
● The on-screen menu might be displayed outside of the image display  
area depending on the adjustment value of the ASPECT, D-ZOOM and  
KEYSTONE. Changing the values of ASPECT, D-ZOOM and  
KEYSTONE may fix the symptom.  
23  
Operating  
Adjusting the projector's elevator  
The projector has Front foot for inclinations and Rear foot for horizontals. Spacers  
on the each elevator foot are installed at the time of shipment, and projector is in a  
condition to be able to just project. If necessary, detach the spacer, and the elevator  
feet can be manually twisted to make more precise adjustments.  
0~2°  
Front foot  
Front foot  
Rear foot  
Spacer  
-1~1°  
Spacer  
Rear foot  
WARNING ►Keep the spacers away from children and pets. Be careful not  
to let them swallow the spacers. If swallowed, consult a physician immediately  
for emergency treatment.  
NOTE The Front foot can be adjusted within 0~2°, while the Rear foot can  
be adjusted within -1~1°  
After the foot is adjusted, it is possible to return it to the state of the shipment with a spacer.  
If change the setting place of the projector, it will recommend keep and reuse the  
spacers.  
Adjusting the zoom and focus  
Press the D-ZOOM + or D-ZOOM - button on the remote  
D-ZOOM - button  
control to display D-ZOOM dialog on screen.  
INPUT  
IWB  
CALIBRATION  
Use the D-ZOOM + and D-ZOOM - buttons to adjust the  
picture size.  
ASPECT  
AUTO  
ACCENTUALIZER HDCR  
D-ZOOM  
-
+
PAGE  
UP  
VOLUME  
MAGNIFY  
ON  
MYBUTTON  
1
To nish the operation, do not touch these buttons for about  
ten seconds until the dialog is disappeared.  
● If you want to expand a part of the image, use the magnify  
function (28).  
2
DOWN  
OFF  
KEYSTONE  
ESC  
TEMPLATE  
FREEZE  
AV MUTE  
MENU  
D-ZOOM + button  
(continued on next page)  
24  
Operating  
Use the focus ring to focus the picture.  
FOCUS ring  
Using the automatic adjustment feature  
AUTO button  
Press AUTO button on the remote control.  
1.  
Pressing this button performs the following.  
INPUT  
IWB  
CALIBRATION  
For a computer signal  
ASPECT  
AUTO  
ACCENTUALIZER HDCR  
D-ZOOM  
The vertical position, the horizontal position and the horizontal  
phase will be automatically adjusted.  
-
+
PAGE  
UP  
VOLUME  
MAGNIFY  
ON  
MYBUTTON  
1
Make sure that the application window is set to its maximum size  
prior to attempting to use this feature. A dark picture may still be  
incorrectly adjusted. Use a bright picture when adjusting.  
2
DOWN  
OFF  
KEYSTONE  
TEMPLATE  
FREEZE  
AV MUTE  
For a video signal  
The video format best suited for the respective input signal will be selected  
automatically. This function is available only when the AUTO is selected for  
the VIDEO FORMAT item in the INPUT menu (41). The vertical position and  
horizontal position will be automatically set to the default.  
For a component video signal  
The vertical position and horizontal position will be automatically set to the default.  
The horizontal phase will be automatically adjusted.  
● The automatic adjustment operation requires approx. 10 seconds. Also please  
note that it may not function correctly with some input.  
● When this function is performed for a video signal, a certain extra such as a line  
may appear outside a picture.  
● When this function is performed for a computer signal, a black frame may be  
displayed on the edge of the screen, depending on the PC model.  
The items adjusted by this function may vary when the FINE or DISABLE is selected  
for the AUTO ADJUST item of the SERVICE item in the OPTION menu (64).  
25  
Operating  
Using the TEMPLATE feature  
Press TEMPLATE button on the remote control.  
Each time you press the button, the projector switches the  
mode for TEMPLATE in turn.  
INPUT  
IWB  
CALIBRATION  
1.  
ASPECT  
AUTO  
ACCENTUALIZER HDCR  
D-ZOOM  
-
+
PAGE  
UP  
VOLUME  
MAGNIFY  
ON  
MYBUTTON  
1
TEST PATTERN DOT-LINE1 DOT-LINE2 DOT-LINE3  
2
DOWN  
OFF  
   
MAP1 CIRCLE2  
KEYSTONE  
TEMPLATE  
FREEZE  
AV MUTE  
MAP2  
CIRCLE1  
DOT-LINE4  
TEMPLATE button  
TEMPLATE button does not work when no proper signal is inputted.  
Other buttons  
HDCR: Displays the HDCR menu (34).  
ACCENTUALIZER: Displays the ACCENTUALIZER menu (34).  
INPUT  
IWB  
CALIBRATION  
ASPECT  
AUTO  
ACCENTUALIZER HDCR  
D-ZOOM  
-
+
PAGE  
UP  
VOLUME  
MAGNIFY  
ON  
MYBUTTON  
1
button  
ACCENTUALIZER  
2
DOWN  
OFF  
KEYSTONE  
TEMPLATE  
FREEZE  
AV MUTE  
HDCR button  
26  
Operating  
Adjusting the position  
ESC  
MENU  
Press the POSITION button on the remote control while no menu  
1.  
ENTER  
is on screen, to display the D-SHIFT (44) dialog on screen.  
POSITION  
RESET  
Use the ▲, ▼, ◄ and ► buttons to adjust the picture position.  
Press the POSITION button again to finish this operation.  
2.  
POSITION button  
● This is a function to shift the position of the shrunken picture by the D-ZOOM (44)  
function.  
● When an OSD (On Screen Display) menu is displayed, this operation moves the  
position of the OSD menu, but not the position of the picture (31)  
.
● The D-SHIFT adjustment values are not valid when the D-ZOOM is set to 256 (full  
screen). (CP-BX301WN)  
● The D-SHIFT adjustment values are not valid when the D-ZOOM is set to 320 (full  
screen). (CP-BW301WN)  
KEYSTONE button  
Correcting the keystone distortions  
ASPECT  
AUTO  
ACCENTUALIZER HDCR  
Press the KEYSTONE button on the remote control.  
A dialog will appear on the screen to aid you in correcting the  
distortion.  
D-ZOOM  
-
+
1.  
PAGE  
UP  
VOLUME  
MAGNIFY  
ON  
MYBUTTON  
1
2
DOWN  
OFF  
Use the ◄/► cursor buttons for adjustment.  
KEYSTONE  
ESC  
TEMPLATE  
FREEZE  
AV MUTE  
2.  
To close the dialog and complete this operation, press the  
KEYSTONE button again. Even if you do not do anything, the  
dialog will automatically disappear after about ten seconds.  
MENU  
● The adjustable range of this function varies for each input signal. For some input,  
this function may not work well.  
● When the projector is inclined to near ±5 degrees or over, this function may not  
work well.  
● The OSD menu might be displayed outside of the image display area depending  
on the adjustment value of the ASPECT, D-ZOOM and KEYSTONE. Changing  
the values of ASPECT, D-ZOOM and KEYSTONE may fix the symptom.  
27  
Operating  
Using the magnify feature  
MAGNIFY  
Press the MAGNIFY ON button on the remote control.  
The picture will be magnified, and the MAGNIFY dialog will  
appear on the screen. When the MAGNIFY ON button is  
pressed for the first time after the projector is turned on, the  
picture will be zoomed by 1.5 times. On the dialog, triangle  
marks to show each direction will be displayed.  
1.  
ON/OFF button  
INPUT  
IWB  
CALIBRATION  
ASPECT  
AUTO  
ACCENTUALIZER HDCR  
D-ZOOM  
-
+
PAGE  
UP  
VOLUME  
MAGNIFY  
ON  
MYBUTTON  
1
2
DOWN  
OFF  
The display magnification of the projector switches in order  
2.  
with every press of the MAGNIFY ON button.  
For computer signals, HDMITM (RGB) signals, input signals from the  
LAN, USB TYPE A or USB TYPE B port  
1.5 times 2 times 3 times 4 times 1 time  
For video signals, component video signals or HDMITM (Component)  
signals  
1.5 times 2 times 1 time  
While the triangles are displayed on the dialog, use the ▲/▼/◄/► cursor  
buttons to shift the magnifying area.  
3.  
4. Press the MAGNIFY OFF button on the remote control to exit magnification.  
● The MAGNIFY dialog will automatically disappear in several seconds with no  
operation. The dialog will appear again if the MAGNIFY ON button is pressed  
when the dialog has automatically disappeared.  
● The magnification is automatically disabled when the displaying signal or its  
display condition is changed.  
● While the magnification is active, the keystone distortion condition may vary.  
It will be restored when the magnification is disabled.  
● Some horizontal stripes might be visible on the image while magnification is  
active.  
● This function is not available in the following cases:  
- A sync signal in the range not supported is input.  
- There is no input signal.  
28  
Operating  
Temporarily freezing the screen  
FREEZE button  
Press the FREEZE button on the remote control.  
1.  
The “FREEZE” indication will appear on the screen (however,  
INPUT  
IWB  
CALIBRATION  
the indication will not appear when the OFF is selected for  
the MESSAGE item in the SCREEN menu (54), and the  
projector will go into the FREEZE mode, which the picture is  
frozen.  
ASPECT  
AUTO  
ACCENTUALIZER HDCR  
D-ZOOM  
-
+
PAGE  
UP  
VOLUME  
MAGNIFY  
ON  
MYBUTTON  
1
2
DOWN  
OFF  
To exit the FREEZE mode and restore the screen to normal,  
press the FREEZE button again.  
KEYSTONE  
TEMPLATE  
FREEZE  
AV MUTE  
● The projector automatically exits from the FREEZE mode when some control  
buttons are pressed.  
● If the projector continues projecting a still image for a long time, the LCD  
panel might possibly be burned in. Do not leave the projector in the FREEZE  
mode for too long.  
● Images might appear degraded when this function is operated, but it is not a  
malfunction.  
29  
Operating  
Using the menu function  
This projector has the following menus:  
PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK,  
SECURITY and EASY MENU.  
EASY MENU consists of functions often used, and the other menus are classified  
into each purpose and brought together as the ADVANCED MENU.  
Each of these menus is operated using the same methods. While the projector  
is displaying any menu, the MENU button on the projector works as the cursor  
buttons. The basic operations of these menus are as follows.  
STANDBY/ON  
INPUT  
MENU  
MENU button  
ESC button  
Cursor buttons  
LAMP  
TEMP  
ESC  
MENU  
INPUT  
IWB  
CALIBRATION  
POWER  
ASPECT  
AUTO ACCENTUALIZER HDCR  
D-ZOOM  
-
+
PAGE  
UP  
MAGNIFY  
ON  
MYBUTTON  
1
VOLUME  
ENTER  
2
DOWN  
OFF  
KEYSTONE  
ESC  
TEMPLATE  
FREEZE  
AV MUTE  
MENU  
ENTER  
MENU button  
(Cursor buttons)  
POSITION  
RESET  
POSITION  
RESET  
RESET button  
ENTER button  
To start the MENU, press the MENU button. The MENU you last used (EASY  
or ADVANCED) will appear. EASY MENU has priority to appear just after  
powered on.  
1.  
2. In the EASY MENU  
(1) Use the ▲/▼ cursor buttons to select an item to  
operate. If you want to change it to the ADVANCED  
MENU, select the ADVANCED MENU.  
(2) Use the ◄/► cursor buttons to operate the item.  
In the ADVANCED MENU  
(1) Use the ▲/▼ cursor buttons to select a menu.  
If you want to change it to the EASY MENU, select  
the EASY MENU.  
The items in the menu appear on the right side.  
(2) Press the ► cursor button or ENTER button to  
move the cursor to the right side. Then use the  
▲/▼ cursor buttons to select an item to operate and press the ► cursor  
button or ENTER button to progress. The operation menu or dialog of the  
selected item will appear.  
(3) Use the buttons as instructed in the OSD to operate the item.  
(continued on next page)  
30  
Operating  
Using the menu function (continued)  
To close the MENU, press the MENU button again or select EXIT and press  
the ◄ cursor button or ENTER button. Even if you do not do anything, the  
dialog will automatically disappear after about 30 seconds.  
3.  
If you want to move the menu position, use the cursor buttons after pressing the  
POSITION button.  
● Some functions cannot be performed when a certain input port is selected, or  
when a certain input signal is displayed.  
● When you want to reset the operation, press RESET button on the remote  
control during the operation. Note that some items (ex. LANGUAGE, VOLUME)  
cannot be reset.  
● In the ADVANCED MENU, when you want to return to the previous display,  
press the ◄ cursor button or ESC button on the remote control.  
Indication in OSD (On Screen Display)  
The meanings of the general words on the OSD are as follows.  
Indication  
EXIT  
Meaning  
Selecting this word finishes the OSD menu. It's the same as  
pressing the MENU button.  
RETURN  
Selecting this word returns the menu to the previous menu.  
Selecting this word cancels the operation in the present  
menu and returns to the previous menu.  
CANCEL or NO  
Selecting this word executes the prepared function or shifts  
the menu to the next menu.  
OK or YES  
31  
EASY MENU  
EASY MENU  
From the EASY MENU, items shown in the table  
below can be performed.  
Select an item using the ▲/▼ cursor buttons. Then  
perform it according to the following table.  
Item  
Description  
Using the ◄/► buttons switches the mode for aspect ratio.  
ASPECT  
See the ASPECT item in IMAGE menu ( 37).  
Using the ◄/► cursor buttons adjusts the magnification ratio.  
Small  
Large  
ó
See the D-ZOOM item in the SETUP menu ( 44).  
• The on-screen menu might be displayed outside of the image  
display area depending on the adjustment value of the ASPECT,  
D-ZOOM  
D-ZOOM and  
D-ZOOM and  
KEYSTONE . Changing the values of ASPECT,  
KEYSTONE may fix the symptom.  
Using the ◄/► buttons corrects the vertical keystone distortion.  
See the KEYSTONE item in SETUP menu ( 45).  
KEYSTONE  
(continued on next page)  
32  
EASY MENU  
Item  
Description  
Using the ◄/► buttons switches the picture mode.  
The picture modes are combinations of GAMMA and COLOR TEMP  
settings. Choose a suitable mode according to the projected source.  
NORMAL  
CINEMA  
DYNAMIC  
BOARD(BLACK)  
ó
ó
ó
 
PICTURE MODE  
PHOTO  
DAYTIME  
WHITEBOARD  
BOARD(GREEN)  
ó
ó
ó
• When the combination of GAMMA and COLOR TEMP differs  
from pre-assigned modes above, the display on the menu for the  
PICTURE MODE is “CUSTOM”. Please refer to the GAMMA and  
COLOR TEMP ( 34, 35) items in PICTURE menu.  
• Lines or other noise might appear on the screen when this function  
is operated, but it is not a malfunction.  
Using the ◄/► buttons changes the eco mode setting.  
See the ECO MODE item of the LAMP & FILTER item in SETUP  
ECO MODE  
menu ( 46).  
• When the ambient temperature is around 35 to 40°C, the  
brightness of lamp is reduced automatically.  
Pressing the ► button displays the INSTALLATION dialog.  
INSTALLATION  
RESET  
See the INSTALLATION item in SETUP menu ( 48).  
Performing this item resets all of the EASY MENU items except the  
FILTER TIME and LANGUAGE.  
A dialog is displayed for confirmation. Selecting the OK using the ►  
button performs resetting.  
The usage time of the air filter is shown in the menu.  
Performing this item resets the filter time which counts usage time  
of the air filter.  
A dialog is displayed for confirmation. Selecting the OK using the ►  
button performs resetting.  
FILTER TIME  
LANGUAGE  
See the FILTER TIME item of the LAMP & FILTER item in SETUP  
menu ( 47).  
Using the ◄/► buttons changes the display language.  
See the LANGUAGE item in SCREEN menu ( 52).  
Press the ► or ENTER button to use the menu of PICTURE,  
ADVANCED MENU IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK or  
SECURITY.  
EXIT  
Press the ◄ or ENTER button to finish the OSD menu.  
33  
PICTURE menu  
PICTURE menu  
From the PICTURE menu, items shown in the table  
below can be performed.  
Select an item using the ▲/▼ cursor buttons, and press  
the ► cursor button or ENTER button to execute the  
item. Then perform it according to the following table.  
Item  
Description  
Using the ◄/► buttons adjusts the brightness.  
BRIGHTNESS  
Dark  
Light  
ó
Using the ◄/► buttons adjusts the contrast.  
Weak Strong  
CONTRAST  
HDCR  
ó
A function to show a clear picture in a bright room.  
Using the◄/► buttons adjusts the contrast.  
• This function may not work properly when IMAGE OPTIMIZER is  
enabled.  
ACCENTUALIZER is a function to improve the legibility.  
Using the ◄/► buttons adjusts the sharpness.  
Weak  
Strong  
ó
ACCENTUALIZER • There may be some noise and/or the screen may flicker for a  
moment when an adjustment is made. This is not a malfunction.  
• This function may not work properly when IMAGE OPTIMIZER is  
enabled.  
Using the ▲/▼ buttons switches the gamma mode.  
To adjust CUSTOM  
Selecting a mode whose name includes CUSTOM and then  
pressing the ► button or the ENTER button displays  
a dialog to aid you in adjusting the mode.  
This function is useful when you want to  
change the brightness of particular tones.  
Choose an item using the ◄/► buttons,  
and adjust the level using the ▲/▼ buttons.  
You can display a test pattern for checking the effect of your  
adjustment by pressing the ENTER button.  
Each time you press the ENTER button, the  
GAMMA  
pattern changes as below.  
No pattern Gray scale of 9 steps  
ð
Ramp Gray scale of 15 steps  
The eight equalizing bars correspond to eight tone levels of the test  
pattern (Gray scale of 9 steps) except the darkest in the left end. If you  
want to adjust the 2nd tone from left end on the test pattern, use the  
equalizing adjustment bar “1”. The darkest tone at the left end of the  
test pattern cannot be controlled with any of equalizing adjustment bar.  
• Lines or other noise might appear on the  
screen when this function is operated, but it  
is not a malfunction.  
34  
PICTURE menu  
Item  
Description  
Using the ▲/▼ buttons switches the color temperature mode.  
To adjust CUSTOM  
Selecting a mode whose name includes  
CUSTOM and then pressing the ► button  
or the ENTER button displays a dialog  
to aid you in adjusting the OFFSET and  
GAIN of the selected mode.  
OFFSET adjustments change the color intensity on the whole tones  
of the test pattern.  
GAIN adjustments mainly affect color intensity on the brighter tones  
of the test pattern.  
COLOR TEMP  
Choose an item using the ◄/► buttons, and adjust the level using  
the ▲/▼ buttons.  
You can display a test pattern for checking the effect of your  
adjustment by pressing the ENTER button.  
Each time you press the ENTER button, the pattern changes as below.  
No pattern Gray scale of 9 steps  
ð
Ramp Gray scale of 15 steps  
• Lines or other noise might appear on the screen  
when this function is operated, but it is not a  
malfunction.  
Using the ◄/► buttons adjusts the strength of whole color.  
Weak  
Strong  
ó
• This item can be selected only for a video and component video  
signal.  
COLOR  
For an HDMITM signal, this item can also be selected if either (1) or (2) applies.  
(1) HDMI FORMAT item in the INPUT menu is set to VIDEO.  
(2) HDMI FORMAT item in the INPUT menu is set to AUTO, and the  
projector recognizes that it receives video signals.  
Using the ◄/► buttons adjusts the tint.  
Reddish  
Greenish  
ó
• This item can be selected only for a video and component video  
signal.  
TINT  
For an HDMITM signal, this item can also be selected if either (1) or (2) applies.  
(1) HDMI FORMAT item in the INPUT menu is set to VIDEO.  
(2) HDMI FORMAT item in the INPUT menu is set to AUTO, and the  
projector recognizes that it receives video signals.  
(continued on next page)  
35  
PICTURE menu  
Item  
Description  
Using the ◄/► buttons adjusts the sharpness.  
Weak  
Strong  
ó
SHARPNESS  
• There may be some noise and/or the screen may flicker for a  
moment when an adjustment is made. This is not a malfunction.  
Using the ▲/▼ cursor buttons changes the active iris control mode.  
PRESENTATION  
THEATER  
OFF  
ó
ó
PRESENTATION : The active iris displays the best presentation  
image for both bright and dark scenes.  
THEATER : The active iris displays the best theater image for  
both bright and dark scenes.  
ACTIVE IRIS  
OFF : The active iris is always open.  
• The screen may flicker when the PRESENTATION or THEATER  
modes are selected. If this occurs select OFF.  
This projector has 4 memories for adjustment data (for all the items  
of the PICTURE menu).  
Selecting a function using the ▲/▼ buttons and pressing the ► or  
ENTER button performs each function.  
SAVE-1  
SAVE-2  
SAVE-3  
SAVE-4  
ó
ó
ó
ó
ó
LOAD-4 LOAD-3  
LOAD-2  
LOAD-1  
ó
SAVE-1, SAVE-2, SAVE-3, SAVE-4  
Performing a SAVE function saves the current adjustment data into  
the memory linked in the number included in the function’s name.  
• Remember that the current data being stored of a memory will be  
lost by saving new data into the memory.  
MY MEMORY  
LOAD-1, LOAD-2, LOAD-3, LOAD-4  
Performing a LOAD function loads the data from the memory linked  
in the number included in the function’s name, and adjusts the  
picture automatically depending on the data.  
• The LOAD functions whose linked memory has no data are  
skipped.  
• Remember that the current adjusted condition will be lost by  
loading data. If you want to keep the current adjustment, please  
save it before performing a LOAD function.  
• There may be some noise and the screen may flicker for a  
moment when loading data. This is not malfunction.  
You can perform the LOAD function using MY BUTTON. Please  
see MY BUTTON item in OPTION menu ( 60).  
36  
IMAGE menu  
IMAGE menu  
From the IMAGE menu, items shown in the table  
below can be performed.  
Select an item using the ▲/▼ cursor buttons, and  
press the ► cursor button or ENTER button to  
execute the item. Then perform it according to the  
following table.  
Item  
Description  
Using the ▲/▼ buttons switches the mode for aspect ratio.  
For a computer signal  
NORMAL 4:3 16:9  
16:10  
ó ó ó ó  
NATIVE  
For an HDMITM signal  
NATIVE  
ó ó ó ó ó  
NORMAL  
4:3 16:9 16:10 14:9  
ASPECT  
For a video signal or component video signal  
4:3 16:9 16:10 14:9 NATIVE  
ó ó ó ó  
For an input signal from the LAN, USB TYPE A or USB TYPE B  
port, or if there is no signal  
CP-BX301WN: 4:3 (fixed)  
CP-BW301WN: 16:10 (fixed)  
• The NORMAL mode keeps the original aspect ratio of the signal.  
Using the ◄/► buttons adjusts the over-scan ratio.  
Small (It magnifies picture)  
Large (It reduces picture)  
ó
• This item can be selected only for a video and component video  
signal.  
• For an HDMITM signal, this item can also be selected if either (1) or  
(2) applies.  
OVER SCAN  
(1) HDMI FORMAT item in the INPUT menu is set to VIDEO.  
(2) HDMI FORMAT item in the INPUT menu is set to AUTO, and the  
projector recognizes that it receives video signals.  
(continued on next page)  
37  
IMAGE menu  
Item  
Description  
Using the ◄/► buttons adjusts the vertical position.  
Down  
Up  
ó
• Over-adjusting the vertical position may cause noise to appear on  
the screen. If this occurs, please reset the vertical position to the  
default setting. Pressing the RESET button when the V POSITION  
is selected will reset the V POSITION to the default setting.  
• When this function is performed on a video signal, the range of  
V POSITION  
this adjustment depends on OVER SCAN ( 37) setting. It is not  
possible to adjust when OVER SCAN is set to 10.  
This function is unavailable for a signal from the LAN, USB TYPE A,  
USB TYPE B or HDMI 1/2 port.  
Using the ◄/► buttons adjusts the horizontal position.  
Right  
Left  
ó
Over-adjusting the horizontal position may cause noise to appear on  
the screen. If this occurs, please reset the horizontal position to the  
default setting. Pressing the RESET button when the H POSITION is  
selected will reset the H POSITION to the default setting.  
H POSITION  
• When this function is performed on a video signal, the range of  
this adjustment depends on OVER SCAN ( 37) setting. It is not  
possible to adjust when OVER SCAN is set to 10.  
This function is unavailable for a signal from the LAN, USB TYPE A,  
USB TYPE B or HDMI 1/2 por  
t.  
(continued on next page)  
38  
IMAGE menu  
Item  
Description  
Using the ◄/► buttons adjusts the horizontal phase to eliminate flicker.  
Right Left  
ó
H PHASE  
• This item can be selected only for a computer signal or a  
component video signal. This function is unavailable for a signal  
from the LAN, USB TYPE A, USB TYPE B or HDMI 1/2 port.  
Using the ◄/► buttons adjusts the horizontal size.  
Small  
Large  
ó
• This item can be selected only for a computer signal. This function  
is unavailable for a signal from the LAN, USB TYPE A, USB TYPE  
B or HDMI 1/2 port.  
• When this adjustment is excessive, the picture may not be  
displayed correctly. In such a case, please reset the adjustment  
by pressing the RESET button on the remote control during this  
operation.  
H SIZE  
• Images might appear degraded when this function is operated, but  
it is not a malfunction.  
Selecting this item performs the automatic adjustment feature.  
For a computer signal  
The vertical position, the horizontal position and the horizontal  
phase will be automatically adjusted.  
Make sure that the application window is set to its maximum size  
prior to attempting to use this feature. A dark picture may still be  
incorrectly adjusted. Use a bright picture when adjusting.  
For a video signal  
The video format best suited for the respective input signal will  
be selected automatically. This function is available only when  
the AUTO is selected for the VIDEO FORMAT item in the INPUT  
menu ( 41).  
The vertical position and horizontal position will be  
automatically set to the default.  
For a component video signal  
The vertical position and horizontal position will be automatically  
set to the default. The horizontal phase will be automatically  
adjusted.  
AUTO ADJUST  
EXECUTE  
• The automatic adjustment operation requires approx. 10 seconds.  
Also please note that it may not function correctly with some input.  
• When this function is performed for a video signal, a certain extra  
such as a line may appear outside a picture.  
• When this function is performed for a computer signal, a black  
frame may be displayed on the edge of the screen, depending on  
the PC model.  
• The items adjusted by this function may vary when the FINE or  
DISABLE is selected for the AUTO ADJUST item of the SERVICE  
item in the OPTION menu ( 64).  
39  
INPUT menu  
INPUT menu  
From the INPUT menu, items shown in the table  
below can be performed.  
Select an item using the ▲/▼ cursor buttons, and  
press the ► cursor button or ENTER button to  
execute the item. Then perform it according to the  
following table.  
Item  
Description  
Using the ▲/▼ buttons switches the progress mode.  
TV FILM OFF  
ó ó  
This function works only for a video signal, component video signal  
(of 480i@60 or 576i@50 or 1080i@50/60) and an HDMITM signal (of  
480i@60 or 576i@50 or 1080i@50/60)  
PROGRESSIVE  
.
• When TV or FILM is selected, the screen image will be sharp.  
FILM adapts to the 2-3 Pull-Down conversion system. But these  
may cause a certain defect (for example, jagged line) of the picture  
for a quick moving object. In such a case, please select OFF, even  
though the screen image may lose sharpness.  
Using the ▲/▼ buttons switches the noise reduction mode.  
HIGH  
MID LOW  
ó ó  
VIDEO NR  
• This function works only for a video signal, component video signal  
(of 480i@60 or 576i@50 or 1080i@50/60) and an HDMITM signal (of  
480i@60 or 576i@50 or 1080i@50/60).  
Using the ▲/▼ buttons switches the mode for color space.  
AUTO  
RGB  
ó ó  
SMPTE240  
REC709  
REC601  
ó
ó
• This item can be selected only for a computer signal, component  
video signal(except for signals from the LAN, USB TYPE A and  
USB TYPE B ports) or an HDMI™ signal.  
COLOR SPACE  
• The AUTO mode automatically selects the optimum mode.  
• The AUTO operation may not work well at some signals. In such a  
case, it might be good to select a suitable mode except AUTO.  
(continued on next page)  
40  
INPUT menu  
Item  
Description  
The video format for VIDEO IN port can be set.  
Using the ◄/► buttons switches  
the mode for video format.  
AUTO  
NTSC  
PAL SECAM  
ó ó  
ó
VIDEO FORMAT  
N-PAL  
M-PAL NTSC4.43  
ó
ó
This item is performed only for a video signal from the VIDEO IN port.  
• The AUTO mode automatically selects the optimum mode.  
• The AUTO operation may not work well for some signals. If the  
picture becomes unstable (e.g. an irregular picture, lack of color),  
please select the mode according to the input signal.  
The video format of HDMITM input signals from the HDMI 1 and 2  
ports can be set.  
(1) Use the ▲/▼ buttons to  
select the HDMI port to be  
set.  
(2) Use the ◄/►buttons to select the video format.  
AUTO  
VIDEO  
COMPUTER  
ó
ó
HDMI FORMAT  
AUTO: automatically sets the optimum mode.  
VIDEO: sets the suitable mode for DVD signals.  
COMPUTER: sets the suitable mode for computer signals.  
• When the COMPUTER is selected, the functions COLOR  
(PICTURE menu), TINT (PICTURE menu) and OVER SCAN  
(IMAGE menu) are unavailable.  
The digital range of HDMITM input signals from the HDMI 1 and 2  
ports can be set.  
(1) Use the ▲/▼ buttons to  
select the HDMI port to be  
set.  
(2) Use the ◄/►buttons to select the digital range.  
HDMI RANGE  
AUTO  
NORMAL  
ENHANCED  
ó
ó
AUTO: automatically sets the optimum mode.  
NORMAL: sets the suitable mode for DVD signals. (16-235)  
ENHANCED: sets the suitable mode for computer signals. (0-255)  
• If the contrast of the screen image is too strong or too weak, try  
finding a more suitable mode.  
(continued on next page)  
41  
INPUT menu  
Item  
Description  
The computer input signal type for COMPUTER IN1 and IN2 ports  
can be set.  
(1) Use the ▲/▼ buttons to select the COMPUTER IN port to be  
set.  
(2) Use the ◄/► buttons to select  
the computer input signal type.  
(COMPUTER IN1)  
AUTO  
SYNC ON G OFF  
ó
COMPUTER IN  
(COMPUTER IN2)  
AUTO SYNC ON G OFF  
MONITOR OUT  
ó
ó
• Selecting the AUTO mode allows you to input a sync on G signal  
or component video signal from the port ( 13).  
• In the AUTO mode, the picture may be distorted with certain  
input signals. In such a case, remove the signal connector so that  
no signal is received and select the SYNC ON G OFF, and then  
reconnect the signal.  
Set the frame lock function on/off for each port.  
(1) Use the ▲/▼ buttons to select  
the input ports.  
(2) Use the ◄/► buttons to turn the  
frame lock function on/off .  
ON  
OFF  
ó
FRAME LOCK  
• This item can be performed only on a signal with a vertical  
frequency of 49 to 51Hz, 59 to 61 Hz.  
• When ON is selected, moving pictures are displayed more  
smoothly.  
• This function is unavailable for a signal from the HDMI (of  
480i@60 or 576i@50 or 1080i@50/60) port.  
(continued on next page)  
42  
INPUT menu  
Item  
Description  
The resolution for the COMPUTER IN1 and COMPUTER IN2 input  
signals can be set on this projector.  
(1) In the INPUT menu select the RESOLUTION using the ▲/▼  
buttons and press the ► button.  
The RESOLUTION menu will be  
displayed.  
(2) In the RESOLUTION menu select the  
resolution you wish to display using  
the ▲/▼ buttons.  
Selecting AUTO will set a resolution  
appropriate to the input signal.  
(3) Pressing the ► or ENTER button when  
selecting a STANDARD resolution will  
automatically adjust the horizontal and  
STANDARD  
vertical positions, clock phase and  
horizontal size.  
The INPUT_INFORMATION dialog will be  
displayed.  
(4) To set a custom resolution use the ▲/▼ buttons to select  
the CUSTOM and the RESOLUTION_CUSTOM box will be  
RESOLUTION  
displayed.  
CUSTOM  
Set the horizontal (HORZ) and  
vertical (VERT) resolutions using  
the ▲/▼/◄/► buttons.  
This function may not support all  
resolutions.  
(5) Move the cursor to OK on screen and press the ► or ENTER  
button. The message "ARE YOU SURE YOU WISH TO  
CHANGE RESOLUTION?" appears. To save the setting, press  
the ► button.  
The horizontal and vertical positions, clock phase and horizontal  
size will be automatically adjusted.  
The INPUT_INFORMATION dialog  
will be displayed.  
(6) To revert back to the previous resolution without saving changes,  
move the cursor to CANCEL on screen and press the ◄ or  
ENTER button.  
The screen will then return to the RESOLUTION menu displaying  
the previous resolution.  
• For some pictures, this function may not work well.  
43  
SETUP menu  
SETUP menu  
From the SETUP menu, items shown in the table  
below can be performed.  
Select an item using the ▲/▼ cursor buttons, and  
press the ► cursor button or ENTER button to  
execute the item. Then perform it according to the  
following table.  
Item  
Description  
Using the ◄/► cursor buttons adjusts the magnification ratio.  
Small Large  
ó
• The on-screen menu might be displayed outside of the image  
display area depending on the adjustment value of the ASPECT,  
D-ZOOM  
D-ZOOM and  
D-ZOOM and  
KEYSTONE. Changing the values of ASPECT,  
KEYSTONE may fix the symptom.  
Using the ◄/►/▲/▼ cursor buttons adjusts the picture position.  
• The D-SHIFT adjustment values are not valid when the D-ZOOM  
is set to 256 (full screen). (CP-BX301WN)  
D-SHIFT  
• The D-SHIFT adjustment values are not valid when the D-ZOOM  
is set to 320 (full screen). (CP-BW301WN)  
Using the ▲/▼ cursor buttons selects the vertical picture position.  
TOP  
MID BOTTOM  
ó ó  
The PICTURE POSITION is not changed if any of the following  
cases apply.  
• The ASPECT is set to 4:3.  
• The input signal has an aspect ratio of 4:3 or vertically larger than  
PICTURE POSITION 4:3, while the ASPECT is set to NORMAL.  
(CP-BX301WN) • Vertical size of the displayed image is full on the effective display  
area, while the ASPECT is set to NATIVE.  
• One of the following messages is displayed on the screen:  
"NO INPUT IS DETECTED"  
"SYNC IS OUT OF RANGE"  
"INVALID SCAN FREQ."  
• The BLANK or TEMPLATE function is selected.  
(continued on next page)  
44  
SETUP menu  
Item  
Description  
Using the ▲/▼ cursor buttons selects the horizontal picture  
position.  
LEFT  
MID RIGHT  
ó ó  
The PICT. POSIT. H is not changed if any of the following cases  
apply.  
• The ASPECT is set to 16:9 or 16:10.  
• The input signal has an aspect ratio of 16:9, 16:10 or verticallly  
smaller than 16:10, while ASPECT is set to NORMAL.  
• Horizontal size of the displayed image is full on the effective  
display area, while the ASPECT is set to NATIVE.  
• One of the following messages is displayed on the screen:  
"NO INPUT IS DETECTED"  
PICT. POSIT. H  
(CP-BW301WN)  
"SYNC IS OUT OF RANGE"  
"INVALID SCAN FREQ."  
• The BLANK or TEMPLATE function is selected.  
Using the ◄/► buttons corrects the vertical keystone distortion.  
Shrink the bottom of the image  
Shrink the top of the image  
ó
KEYSTONE  
• The adjustable range of this function will vary among inputs. For  
some input, this function may not work well.  
(continued on next page)  
45  
SETUP menu  
Item  
Description  
Using the ▲/▼ buttons turns on/off the AUTO ECO MODE.  
ON  
OFF  
ó
• When ON is selected, the projector will always be set to Eco-  
AUTO ECO  
MODE  
2 mode at start-up regardless of the ECO MODE ( 46) setting.  
An OSD message “AUTO ECO MODE” will be displayed for  
tens of seconds when the projector starts with this function  
activated.  
Using the ▲/▼ buttons switches the ECO MODE.  
OFF  
ECO-1  
ECO-2<=>INTELLIGENT ECO SAVER  
ó
ó
ó
• When the ECO-1/2 is selected, acoustic noise and screen  
brightness are reduced.  
• When INTELLIGENT ECO is selected, the brightness of the  
lamp changes according to the level of the input signal. The  
lamp becomes brighter when the input signal level is high  
and darker when the level is low. If dark images are projected  
continuously, the brightness of the lamp may increase to  
maintain its performance.  
LAMP &  
FILTER  
• When SAVER is selected, you can select the time within 1  
to 30 min. for SAVER MODE using the ► button. If the image  
signal level doesn’t change more than the period set, the  
lamp brightness is reduced and electric power consumption  
decreased. If the image signal level changes or any buttons  
are operated, the lamp will brighten again. If dark images are  
projected continuously, the brightness of the lamp may increase  
to maintain its performance.  
ECO MODE  
• When AUTO ECO MODE ( above) is set to ON, the projector  
will always be set to Eco-2 mode at start-up regardless this  
setting.  
• When the ambient temperature is around 35 to 40°C, the  
brightness of lamp is reduced automatically.  
(continued on next page)  
46  
SETUP menu  
Item  
Description  
The lamp time is the usage time of the lamp, counted after the  
last resetting.  
Pressing the RESET button on the remote control or the ►  
button of the projector displays a dialog.  
To reset the lamp time, select the OK using the ► button.  
CANCEL OK  
ð
LAMP TIME  
• Please reset the lamp time only when you have replaced the  
lamp, for a suitable indication about the lamp.  
• For the lamp replacement, see the section "Replacing the  
lamp" ( 96).  
• The IMAGE OPTIMIZER function does not work properly  
unless  
LAMP TIME is initialized when replacing a lamp.  
The filter time is the usage time of the air filter, counted after the  
last resetting.  
Pressing the RESET button on the remote control or the ►  
button of the projector displays a dialog.  
To reset the filter time, select the OK using the ► button.  
FILTER  
TIME  
CANCEL OK  
ð
LAMP &  
FILTER  
• Please reset the filter time only when you have cleaned or  
replaced the air filter, for a suitable indication about the air filter.  
• For the air filter cleaning, see the section “Cleaning and  
replacing the air filter” ( 98).  
FILTER MESSAGE  
Use the ▲/▼ button to set the timer for notifying by the message  
when to replace the filter unit  
100h  
• • •  
ó ó  
5000h  
OFF  
ó
After choosing an item except OFF, the message “REMINDER  
*** HRS PASSED ....” will appear after the timer reaches the  
interval time set by this feature ( 103).  
When the OFF is chosen, the message will not appear. Utilize  
this feature to keep the air filter clean, setting the suitable time  
according to your environment of this projector.  
FILTER  
MESSAGE  
• Please take care of the filter unit periodically, even if there is no  
message. If the air filter becomes to be blocked by dust or other  
matter, the internal temperature will rise, which could cause  
malfunction, or reduce the lifetime of the projector.  
• Please be careful with the operating environment of the  
projector and the condition of the filter unit.  
(continued on next page)  
47  
SETUP menu  
Item  
Description  
When this function is enabled, automatic image correction  
is performed to maintain visibility in accordance with lamp  
deterioration.  
• This function may not work properly when HDCR/  
ACCENTUALIZER is set to other than 0.  
IMAGE  
OPTIMIZER  
• This function does not work properly unless LAMP TIME is  
initialized when replacing a lamp.  
Pressing the ►button displays the dialog for changing the  
INSTALLATION setting.  
INSTALLATION  
Use the ▲/▼ buttons to select the desired setting on the  
INSTALLATION dialog.  
(continued on next page)  
48  
SETUP menu  
Item  
Description  
Using ▲/▼ buttons switches the standby mode setting between  
NORMAL and SAVING.  
NORMAL  
SAVING  
ó
When SAVING is selected, the power consumption in the standby  
mode is lowered with some functional restriction as below:  
• When SAVING is selected, the RS-232C communication control  
except to turn the projector on and the network function are disabled  
while the projector is in the standby mode. If the COMMUNICATION  
TYPE in the COMMUNICATION menu is set to NETWORK  
BRIDGE, all of the RS-232C commands are disabled ( 67).  
• When SAVING is selected, STANDBY setting of AUDIO SOURCE  
STANDBY MODE  
(
50) is invalid, no signal is output from AUDIO OUT port and no  
sound from a built-in speaker.  
• When SAVING is selected, STANDBY setting of MONITOR OUT  
is invalid, and no signal is output from MONITOR OUT port in the  
standby mode.  
• The USB connection is disabled while the projector is in standby  
mode if the STANDBY MODE item in the SETUP menu of the  
projector is set to SAVING.  
• When SAVING is selected, CLONING load function is invalid while  
in STANDBY MODE.  
49  
AUDIO menu  
AUDIO menu  
From the AUDIO menu, items shown in the table below  
can be performed. Select an item using the ▲/▼ cursor  
buttons, and press the ► cursor button or the ENTER  
button to execute the item. Then perform it according to  
the following table.  
Item  
Description  
Using the ◄/► buttons adjusts the volume.  
VOLUME  
Low  
High  
ó
Using the ▲/▼ buttons turns on/off the built-in speaker.  
ON OFF  
SPEAKER  
ó
When OFF is selected, the built-in speaker does not work.  
While the image signal from the input port chosen in step (1) is  
projected, the audio signal from the input port selected in step  
(2) is output to both the AUDIO OUT port and built-in speaker of  
this projector. However, the built-in speaker does not work when  
SPEAKER is set to OFF.  
(1) Choose a picture input port using the  
▲/▼ buttons.  
Choose STANDBY to select the sound  
output in the standby mode.  
(2) Select an audio input port or the mute  
icon using the ◄/► buttons.  
The icons indicate the following;  
AUDIO SOURCE  
No.1: AUDIO IN1 port  
No.2: AUDIO IN2 port  
No.3: LAN port  
No.4: USB TYPE A port  
No.5: USB TYPE B port No.6: HDMI 1 port  
No.7: HDMI 2 port : mutes the sound  
• Audio input from port nos 3 to 7 can only be selected by each of  
the picture input ports.  
• Even if the projector is in the standby mode, cooling fans may work  
and make noises when the built-in speaker is in operation.  
• C.C. (Closed Caption) is automatically activated when is selected  
and an input signal containing C.C. is received. This function is  
available only when the signal is NTSC for VIDEO or 480i@60 for  
COMPUTER IN1 or COMPUTER IN2, and when AUTO is selected  
for DISPLAY in the C.C. menu under the SCREEN menu ( 57).  
(continued on next page)  
50  
AUDIO menu  
Item  
Description  
Using the ▲/▼ buttons switches the input level to match that of the  
microphone connected to the MIC port.  
MIC LEVEL  
HIGH óLOW  
HIGH: for a microphone with an amplifier.  
LOW: for a microphone without an amplifier.  
Using the ◄/► buttons adjusts the volume of the microphone  
connected to the MIC port.  
MIC VOLUME  
Low  
High  
ó
51  
SCREEN menu  
SCREEN menu  
From the SCREEN menu, items shown in the table  
below can be performed.  
Select an item using the ▲/▼ cursor buttons, and  
press the ► cursor button or ENTER button to  
execute the item. Then perform it according to the  
following table.  
Item  
Description  
Using the ▲/▼/◄/► buttons switches the OSD (On Screen  
Display) language.  
ENGLISH  
FRANÇAIS  
DEUTSCH  
ó
ESPAÑOL  
ó
ó
LANGUAGE  
(shown in the LANGUAGE dialog)  
Press the ENTER or INPUT button to save the language setting.  
Using the ▲/▼/◄/► buttons adjusts the menu position.  
MENU POSITION To quit the operation, press the MENU button on the remote control  
or keep no operation for about 10 seconds.  
Using the ▲/▼ buttons switches the mode for the blank screen.  
The blank screen is a screen for the temporarily blanking feature  
(
22). It is displayed by pressing the AV MUTE button on the  
remote control.  
MyScreen  
ORIGINAL  
BLUE  
WHITE  
BLACK  
ó
ó
ó
ó
BLANK  
MyScreen : Screen can be registered by the MyScreen item ( 53).  
ORIGINAL : Screen preset as the standard screen.  
BLUE, WHITE, BLACK : Plain screens in each color.  
To avoid remaining as an afterimage, the MyScreen or ORIGINAL  
screen will change to the plain black screen after several minutes.  
Using the ▲/▼ buttons switches the mode for the AUTO BLANK  
screen.  
BLUE  
WHITE  
BLACK  
ó
ó
AUTO BLANK  
To avoid remaining as an afterimage, displayed image will change  
to the designated blank color screen by AUTO BLANK after several  
minutes at the following conditions.  
- When MyScreen or ORIGINAL is displayed as BLANK screen.  
- When start-up screen is displayed.  
(continued on next page)  
52  
SCREEN menu  
Item  
Description  
Using the ▲/▼ buttons switches the mode for the start-up screen.  
The start-up screen is a screen displayed when no signal or an  
unsuitable signal is detected.  
MyScreen  
ORIGINAL  
OFF  
ó
ó
MyScreen : Screen can be registered by the MyScreen item ( 53).  
ORIGINAL : Screen preset as the standard screen.  
START UP  
OFF : Plain black screen.  
To avoid remaining as an afterimage, the MyScreen or ORIGINAL  
screen will change to the BLANK screen ( above) after several  
minutes. If also the BLANK screen is the MyScreen or ORIGINAL,  
the plain black screen is instead used.  
• When the ON is selected to the MyScreen PASSWORD item in  
the SECURITY menu ( 74), the START UP is fixed to MyScreen.  
This item allows you to capture an image for use as a MyScreen  
image which can be used as the BLANK screen and START UP  
screen. Display the image you want to capture before executing the  
following procedure.  
Selecting this item displays a dialog  
titled “MyScreen”. It will ask you if  
you start capturing an image from the  
current screen.  
Please wait for the target image to be displayed, and press the  
ENTER or INPUT button to start registration.  
To restore the screen and return to the previous dialog, press the  
RESET button on the remote control.  
MyScreen  
Registration may take several minutes.  
When the registration is completed, the registered screen and the  
following message is displayed for several seconds:  
“MyScreen registration is finished.”  
If the registration failed, the following message is displayed:  
“A capturing error has occurred. Please try again.”  
• This function cannot be selected when the ON is selected to the  
MyScreen Lock item ( 54).  
• This function cannot be selected when the ON is selected to the  
MyScreen PASSWORD item in SECURITY menu ( 74).  
This function is unavailable for a signal from the LAN, USB TYPE A,  
USB TYPE B or HDMI 1/2 port.  
(continued on next page)  
53  
SCREEN menu  
Item  
Description  
Using the ▲/▼ buttons turns on/off the MyScreen lock function.  
ON  
OFF  
ó
When the ON is selected, the item MyScreen is locked. Use this  
function for protecting the current MyScreen.  
MyScreen Lock  
• This function cannot be selected when the ON is selected to the  
MyScreen PASSWORD item in SECURITY menu ( 74).  
Using the ▲/▼ buttons turns on/off the message function.  
ON  
OFF  
ó
When the ON is selected, the following message function works.  
“AUTO IN PROGRESS” while automatically adjusting  
“NO INPUT IS DETECTED”  
“SYNC IS OUT OF RANGE”  
“INVALID SCAN FREQ.”  
“NOT AVAILABLE”  
“Searching….” while searching for the input  
“Detecting….” while an input signal is detected  
“AUTO ECO MODE” while starting up with AUTO ECO MODE  
The indication of the input signal displayed by changing  
The indication of the aspect ratio displayed by changing  
The indication of the PICTURE MODE displayed by changing  
The indication of the ACTIVE IRIS displayed by changing  
The indication of the MY MEMORY displayed by changing  
The indication of “FREEZE” and “II” while freezing the screen by  
pressing the FREEZE button.  
MESSAGE  
The indication of the TEMPLATE displayed by changing.  
The indication of the ECO MODE displayed by changing.  
The D-ZOOM dialog displayed by changing  
• When the OFF is selected, please remember if the picture is  
frozen. Do not mistake freezing for a malfunction ( 29).  
(continued on next page)  
54  
SCREEN menu  
Item  
Description  
Each input port for this projector can have a name applied to it.  
(1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE  
NAME and press the ► or ENTER button.  
The SOURCE NAME menu will be displayed.  
(2) Use the ▲/▼ buttons on the SOURCE  
NAME menu to select the port to be  
named and press the ► button. The  
SOURCE NAME dialog will be displayed.  
Right side of the menu is blank until a  
name is specified.  
(3) Select an icon you would like to assign to  
the port in the SOURCE NAME dialog.  
The name assigned to the port will also be  
automatically switched according to your  
icon selection. Press the ENTER or INPUT  
button to determine your icon selection.  
SOURCE NAME  
(4) Select a number you would like to assign  
to the port along with the icon. You can  
select the number either from blank  
(no number assigned), 1, 2, 3, or 4. Then  
press the ENTER or INPUT button.  
(5) If you would like to modify the name assigned  
to the port, select CUSTOM NAME and  
press the ENTER or INPUT button.  
(continued on next page)  
55  
SCREEN menu  
Item  
Description  
(6) The current name will be displayed on  
the first line. Use the ▲/▼/◄/► buttons  
and the ENTER or INPUT button to  
select and enter characters. To erase 1  
character at one time, press the RESET  
button or press the ◄ and INPUT button  
at the same time. Also if you move the  
cursor to DELETE or ALL CLEAR on  
screen and press the ENTER or INPUT  
button, 1 character or all characters will  
be erased. The name can be a maximum  
of 16 characters.  
SOURCE NAME  
(Continued)  
(7) To change an already inserted character,  
press the ▲ button to move the cursor to  
the first line, and use the ◄/► buttons to  
move the cursor on the character to be  
changed.  
After pressing the ENTER or INPUT button, the character is  
selected. Then, follow the same procedure as described at the  
item (6) above.  
(8) To nish entering text, move the cursor to the OK on screen and  
press the ►, ENTER or INPUT button. To revert to the previous  
name without saving changes, move the cursor to the CANCEL  
on screen and press the ◄, ENTER or INPUT button.  
Using the ▲/▼ cursor buttons switches the mode for the template  
screen.  
Press the ► cursor (or the ENTER) button to display the selected  
template, and press the ◄ cursor button to close the displayed  
screen.  
TEST PATTERN  
DOT-LINE1  
DOT-LINE2 DOT-LINE3  
ó
ó
ó
TEMPLATE  
MAP2  
MAP1  
CIRCLE2  
CIRCLE1  
DOT-LINE4  
ó
ó
ó
ó
You can turn a map upside down and scroll it horizontally when  
MAP1 or MAP2 is selected. To invert or scroll the map, display  
the guidance by pressing the RESET button on the remote three  
seconds or more when MAP1 or MAP2 appears.  
(continued on next page)  
56  
SCREEN menu  
Item  
Description  
The C.C. is the function that displays a  
transcript or dialog of the audio portion of  
a video, files or other presentation or other  
relevant sounds. It is required to have NTSC  
format video or 480i@60 format component  
video source supporting C.C. feature to  
utilize this function.  
It may not work properly, depending on equipment or signal source.  
In this case, please turn off the Closed Caption.  
DISPLAY  
Select Closed Caption DISPLAY setting from following options using  
▲/▼ buttons.  
AUTO  
ON OFF  
ó ó  
AUTO : Closed Caption automatically appears when the input  
signal (C.C. compatible) from the port with the mute icon  
set at AUDIO SOURCE is selected.  
ON : Closed Caption is on.  
OFF : Closed Caption is off.  
• The caption is not displayed when the OSD menu is active.  
• The Closed Caption is the function to display the dialogue,  
narration, and / or sound effects of a television program or other  
video sources. The Closed Caption availability is depending upon  
broadcaster and/or content.  
C.C.  
(Closed Caption)  
MODE  
Select Closed Caption MODE setting from following options using  
▲/▼ buttons.  
CAPTIONS  
TEXT  
ó
CAPTIONS : Display Closed Caption.  
TEXT : Display Text data, which is for additional information such  
as news reports or a TV program guide. The information  
covers the entire screen. Not all of the C.C. program has  
Text information.  
CHANNEL  
Select Closed Caption CHANNEL from following options using ▲/▼  
buttons.  
1
2
3
4
ó ó ó  
1: Channel 1, primary channel / language  
2: Channel 2  
3: Channel 3  
4: Channel 4  
The channel data may vary, depending on the content. Some  
channel might be used for secondary language or empty.  
57  
OPTION menu  
OPTION menu  
From the OPTION menu, items shown in the table  
below can be performed.  
Select an item using the ▲/▼ cursor buttons, and  
press the ► cursor button or ENTER button to execute  
the item. Then perform it according to the following  
table.  
Item  
Description  
Using the ▲/▼ buttons turns on/off the automatic signal search  
function.  
ON  
OFF  
ó
When the ON is selected, detecting no signal automatically cycles  
through input ports in the following order. The search is started from  
AUTO SEARCH the current port. Then when an input is found, the projector will stop  
searching and display the image.  
COMPUTER IN1 COMPUTER IN2 LAN USB TYPE A  
ð ð  
ð
VIDEO HDMI 2 HDMI 1 USB TYPE B  
• It may take several seconds to project the images from the  
USB TYPE B port.  
Using the ▲/▼ buttons turns on/off the DIRECT POWER ON  
function.  
ON  
OFF  
ó
When set to the ON, the lamp in projector will be automatically turned  
on without the usual procedure ( 20), only when the projector is  
supplied with the power after the power was cut while the lamp was on.  
• This function does not work as long as the power has been  
supplied to the projector while the lamp is off.  
DIRECT POWER  
ON  
After turning the lamp on by the DIRECT POWER ON function,  
if neither input nor operation is detected for about 30 minutes, the  
projector is turned off, even though the AUTO POWER OFF function  
(
59) is disabled.  
(continued on next page)  
58  
OPTION menu  
Item  
Description  
Using the ▲/▼ buttons adjusts the time to count down to  
automatically turn the projector off.  
Long (max. 99 minutes)  
Short (min. 0 minute = DISABLE)  
ó
When the time is set to 0, the projector is not turned off automatically.  
When the time is set to 1 to 99, and when the passed time with no-  
signal or an unsuitable signal reaches at the set time, the projector  
lamp will be turned off.  
AUTO POWER  
OFF  
If one of the projector's buttons or the remote control buttons  
is pressed or one of the commands (except get commands) is  
transmitted to the CONTROL port during the corresponding time,  
projector will not be turned off.  
Please refer to the section “Turning off the power” ( 21).  
(continued on next page)  
59  
OPTION menu  
Item  
Description  
This item is to assign one of the following functions to MY BUTTON  
1/2 on the remote control ( 7).  
(1) Use the ▲/▼ buttons on the MY BUTTON menu to select a MY  
BUTTON - (1/2) and press the ► or ENTER button to display the  
MY BUTTON setup dialog.  
(2) Then using the ▲/▼/◄/► buttons sets one of the following  
functions to the chosen button. Press the ENTER or INPUT  
button to save the setting.  
• COMPUTER IN1: Selects the input from COMPUTER IN1 port.  
• COMPUTER IN2: Selects the input from COMPUTER IN2 port.  
• LAN: Selects input from LAN port.  
• USB TYPE A: Selects input from USB TYPE A port.  
• USB TYPE B: Selects input from USB TYPE B port.  
• HDMI1: Selects input from HDMI 1 port.  
• HDMI2: Selects input from HDMI 2 port.  
• VIDEO: Selects the input from VIDEO IN port.  
• SLIDESHOW: Selects the input from USB TYPE A port, and starts  
a Slideshow.  
• MY IMAGE: Displays the MY IMAGE menu.  
• MESSENGER: Turns the messenger text displayed on the screen on/off  
MY BUTTON  
(
Messenger Function in the User's Manual - Network Guide).  
When there is no transferred text data to display, the message ”NO  
MESSENGER DATA" appears.  
• INFORMATION: Displays SYSTEM_INFORMATION,  
INPUT_INFORMATION ( 71), WIRELESS INFORMATION,  
WIRED INFORMATION or nothing.  
• MY MEMORY: Loads one of adjustment data stored ( 36).  
When more than one data are saved, the adjustment  
changes every time the MY BUTTON is pressed.  
When no data is saved in memory, the  
dialog "No saved data" appears.  
When the current adjustment is not  
saved to memory, the dialog as shown in  
the right appears.  
If you want to keep the current adjustment, please press  
the ► button to exit. Otherwise loading a data will overwrite the  
current adjusted condition.  
(continued on next page)  
60  
OPTION menu  
Item  
Description  
• ACTIVE IRIS: Changes the active iris mode.  
• PICTURE MODE: Changes the PICTURE MODE ( 33).  
FILTER RESET: Displays the filter time reset confirmation dialogue  
( 47).  
MY BUTTON  
(Continued)  
• RESOLUTION: Turns on/off the RESOLUTION dialog ( 43).  
• MIC VOLUME: Turns on/off the MIC VOLUME dialog ( 51).  
• ECO MODE: Changes the ECO MODE ( 46).  
• SAVER MODE: Turns on/off the SAVER MODE ( 46).  
How to setup the item  
1. Use the ▲/▼/◄/► cursor buttons to select or adjust.  
2 Select OK to finish the settings.  
• Please refer to the actual on-screen display(OSD)  
for appropriate operation.  
NOTE  
Item  
Description  
Set the DATE(Year/Month/Date) and Time(24-  
hour scale).  
DATE AND TIME  
SPECIFIC DATE Set specific date from 1 to 10.  
The TIME and EVENT for Program 1 to 16  
can be editted.  
PROGRAM EDIT  
How to activate(DATE AND TIME / SPECIFIC DATE)  
Place a check mark in the box.  
SCHEDULE  
Date and first setup  
info could be seen  
with the check mark.  
Check mark  
in the box  
1/2 page (Set the DATE(Year/Month/Date) and Time(24-hour scale).)  
(continued on next page)  
61  
OPTION menu  
Item  
Description  
Date and  
first setup  
info could be  
seen with the  
check mark.  
Check mark  
in the box  
SCHEDULE  
(Continued)  
2/2 page (Set specific date from 1 to 10.)  
Press the ▼ cursor button to move from 1/2 page to 2/2 page with  
the state of selecting "SATURDAY".  
PROGRAM EDIT  
The TIME and EVENT for Program 1 to 16 can be editted.  
RETURN  
Select this to go back  
to the top menu of the  
SCHEDULE.  
SELECT  
Select from PROGRAM-01  
to 16 to edit.  
Each PROGRAM can be  
setup up to 20 settings  
COPY TO  
The selected program (with the settings of TIME and EVENT)  
can be copied to other program.  
APPLY  
Select this to apply and save all adjustments and settings.  
(continued on next page)  
62  
OPTION menu  
Item  
Description  
How to edit the selected PROGRAM  
1. Select from 1 to 20 events.  
Use the ▲/▼ cursor buttons to select.  
Press ► cursor button to set the TIME and EVENT.  
2. Use the ◄/► cursor  
buttons to select.  
3. Use the ◄/► cursor  
buttons to adjust.  
EVENT can be selected as listed below.  
◦ POWER − ON, STANDBY  
◦ INPUT SOURCE − "input source"channel  
◦ MY IMAGE − IMAGE-1 to 4, IMAGE OFF  
◦ MESSENGER − TEXT-1 to 12, TEXT OFF  
SCHEDULE  
(Continued)  
ECO MODE − OFF, ECO-1, ECO-2, INTELLIGENT ECO,  
SAVER  
◦ BLANK − ON, OFF  
◦ SLIDESHOW - START, STOP  
4. Press ► cursor button to finish the settings.  
5. Select APPLY to save the settings.  
• Please refer to the actual on-screen display(OSD)  
for appropriate operation.  
NOTE  
(continued on next page)  
63  
OPTION menu  
Item  
Description  
Selecting this item displays the SERVICE  
menu.  
Select an item using the ▲/▼ buttons, and  
press the ► button or the ENTER button  
on the remote control to execute the item.  
ALTITUDE  
Using the ▲/▼ buttons switches the rotation speed of the cooling  
fans. If the projector is used at an altitude of about 1600 m or higher,  
select HIGH. Otherwise, select NORMAL. Note that the projector is  
noisier when the HIGH is selected.  
HIGH  
NORMAL  
ó
AUTO ADJUST  
Using the ▲/▼ buttons to select one of the mode. When the  
DISABLE is selected, the automatic adjustment feature is disabled.  
SERVICE  
FINE  
FAST DISABLE  
ó ó  
FINE: Finer tuning including H.SIZE adjustment.  
FAST: Faster tuning, setting H.SIZE to prearranged data for the  
input signal.  
• Depending on conditions, such as input image, signal cable to  
the projector, environment around the projector, etc., the automatic  
adjustment may not work correctly. In such a case, please  
choose DISABLE to disable the automatic adjustment, and make  
adjustment manually.  
GHOST  
Adjust the settings using the ▲/▼ buttons to eliminate ghosting.  
(continued on next page)  
64  
OPTION menu  
Item  
Description  
KEY LOCK  
(1) Use the ▲/▼ buttons to select CONTROL PANEL or REMOTE  
CONTROL.  
(2) Use the ◄/► buttons to turn the key lock function on/off.  
SERVICE  
(continued)  
When ON is selected, all buttons on the projector or remote control  
except the STANDBY/ON button are locked.  
• Please use this function to prevent tampering or accidental  
operation.  
• It is not possible to set both CONTROL PANEL and REMOTE  
CONTROL to ON.  
(continued on next page)  
65  
OPTION menu  
Item  
Description  
REMOTE FREQ.  
(1) Use the ▲/▼ button to change the projector's remote sensor  
frequency setting ( 18).  
1:NORMAL  
2:HIGH  
ó
(2) Use the ◄/► button to change the  
projector's remote sensor on or off.  
ON  
OFF  
ó
The factory default setting is for both 1:NORMAL and 2:HIGH to be  
on. If the remote control does not function correctly, disable either of  
them.  
It's not possible to disable both options at the same time.  
Selecting this item displays COMMUNICATION  
menu.  
In this menu, you can configure the serial  
communication settings of the projector using the  
CONTROL port.  
SERVICE  
(continued)  
• Select an item using the cursor buttons ▲/▼.  
COMMUNICATION  
Then pressing the ► button opens the submenu  
for the setting item you selected. Or, pressing  
the ◄ button instead of the ► button makes the  
menu back to the previous one without changing  
the setup. Each submenu can be operated as  
described above.  
• When COMMUNICATION TYPE (67) is set to  
OFF, the other items in COMMUNICATION menu  
are invalid.  
• For the function of serial communication, refer to  
the User's Manual - Network Guide.  
(continued on next page)  
66  
OPTION menu  
Item  
Description  
COMMUNICATION TYPE  
Select the communication type for transmission via  
the CONTROL port.  
NETWORK BRIDGE: Select this type, if it is required  
to control an external device as a network terminal,  
via this projector from the computer.  
The CONTROL port doesn't accept RS-232C  
commands ( Network Bridge Function in the  
User’s Manual - Network Guide  
)
OFF: Select this mode to receive RS-232C  
commands using the CONTROL port.  
OFF is selected as the default setting.  
• When you select the NETWORK BRIDGE, check  
the item, TRANSMISSTION METHOD ( below).  
SERIAL SETTINGS  
Select the serial communication condition for the  
CONTROL port.  
BAUD RATE  
4800bps  
9600bps  
19200bps  
38400bps  
ó
ó
ó
SERVICE  
(continued)  
COMMUNICATION  
(continued)  
PARITY  
NONE  
ODD EVEN  
ó ó  
The BAUD RATE is fixed to 19200bps and PARITY  
is fixed NONE when the COMMUNICATION TYPE  
is set to OFF above).  
(
TRANSMISSION METHOD  
Select the transmission method for communication by  
the NETWORK BRIDGE from the CONTROL port.  
HALF-DUPLEX  
FULL-DUPLEX  
ó
HALF-DUPLEX: This method lets the projector  
make two way communication, but only one  
direction, either transmitting or receiving data, is  
allowed at a time.  
FULL-DUPLEX: This method lets the projector  
make two way communication, transmitting and  
receiving data at the same time.  
• HALF-DUPLEX is selected as the default setting.  
• If you select HALF-DUPLEX, check the setting of  
the item RESPONSE LIMIT TIME ( 68).  
(continued on next page)  
67  
OPTION menu  
Item  
Description  
RESPONSE LIMIT TIME  
Select the time period to wait for receiving  
response data from other device communicating by  
the NETWORK BRIDGE and the HALF-DUPLEX  
through the CONTROL port.  
OFF  
1s 3s  
2s  
ó ó ó  
OFF: Select this mode if it is not required to check  
the responses from the device that the projector  
sends data to. In this mode, the projector can  
send out data from the computer continuously.  
COMMUNICATION  
(continued)  
1s /2s /3s: Select the time period to keep the  
projector waiting for response from the device  
that the projector sends data to. While waiting the  
response, the projector does not send out any  
data from the CONTROL port.  
SERVICE  
(continued)  
• This menu is available only when the NETWORK  
BRIDGE is selected for the COMMUNICATION  
TYPE and the HALF-DUPLEX is selected for the  
TRANSMISSION METHOD ( 67).  
• OFF is selected as the default setting.  
The setttings of the projector can be coppied via USB  
memory.  
SAVE:Saves each settings of the projector to USB  
memory.  
LOAD:Loads each settings of the projector from  
USB memory. Message will be displayed  
after loading, and power will turn off after five  
min. or by pressing ► button. (A message is  
displayed for a few seconds if loading fails.)  
CLONING  
After saving / loading, you can remove the USB  
storage device.  
(continued on next page)  
68  
OPTION menu  
Item  
Description  
The following items are exempted.  
SETUP: LAMP TIME, FILTER TIME  
OPTION: SERVICE(GHOST)  
NETWORK: WIRELESS AND WIRED SETUP  
(IP ADDRESS, SUBNET MASK,  
DEFAULT GATEWAY, DATE AND  
TIME), MY IMAGE, PRESENTATION  
SECURITY: MY TEXT DISPLAY  
• Operation is not available if SECURITY_  
CLONNING LOCK is turned ON.  
• The Screen_MyScreen can only be loaded.  
CLONING load function on STANDBY MODE  
• While the projector is in STANDBY MODE, push  
the INPUT button of control panel together with ►  
button, and then press ▲ button to start operating  
the CLONING load function.  
• During loading process, the three indicators of  
control panel (POWER (orange), TEMP, LAMP)  
will remain on.  
• After the loading process, the three indicators  
(POWER (orange), TEMP, LAMP) will turn off.  
Then, you can remove the USB storage device.  
• If the loading fails, the three indicators (POWER  
(orange), TEMP, LAMP) will blink at the same  
time.  
SERVICE  
(continued)  
CLONING  
(continued)  
• CLONING is invalid with the following conditions.  
- CLONING LOCK is turned ON.  
With this condition, the three indicators (POWER  
(orange), TEMP, LAMP) will blink at approximately  
three seconds intervals.  
- If the STANDBY MODE is set to SAVING.  
- If there is no USB memory inserted into USB  
TYPE A port.  
- If PIN LOCK is not being released.  
- If a system error occurs.  
• Please operate one of the following after loading.  
- Press INPUT button and  
button of the control  
panel at the same time.  
- Wait at least five min. after loading.  
- Restart the projector after re-plugging the AC  
cable.  
(continued on next page)  
69  
OPTION menu  
Item  
Description  
Load MyScreen data  
• Please save the image data as "pj_logo.bmp" or  
"pj_logo.gif" into USB memory.  
• Please note that the only compatible formats are  
as follows.  
-File format  
Windows BMP bit/pixel: 4/8/16/24/32bit  
Compression format :  
Without compression/RLE/GIF  
-Image size: more than 36x36, less than 1280x800  
• If two kinds of file format are saved, "pj_logo.  
bmp" will be registered into MyScreen data.  
• If MyScreen LOCK or MyScreen PASSWORD  
is turned ON, the data of MyScreen cannot be  
loaded.  
SERVICE  
(continued)  
CLONING  
(continued)  
Setting the data  
• Operating the SAVE function under CLONING  
will name the file as "pj_data.bin" into the USB  
memory. Please do not attempt to change the file  
name or the folder structure.  
• If a file with the same name already exists, it will  
be overwritten by operating the SAVE function.  
Loading function  
• Please note that saved data from other model  
cannot be loaded.  
Please note that, if any of the following functions:  
MyScreen PASSWORD, PIN LOCK, MY TEXT  
PASSWORD under SECURITY menu or  
MyScreen Lock under SCREEN menu is ON, the  
respective saved data cannot be loaded.  
(continued on next page)  
70  
OPTION menu  
Item  
Description  
Loading function (continued)  
Please note that the saved data of START UP  
and MyScreen Lock under SCREEN menu cannot  
be loaded if MyScreen PASSWORD under  
SECURITY menu is ON.  
CLONING  
(continued)  
Please note that the saved data of MY TEXT  
WRITING cannot be loaded if MY TEXT  
PASSWORD under SECURITY menu is ON.  
INFORMATION  
Selecting this item displays a dialog titled “INPUT_INFORMATION”.  
It shows the information about the current input.  
SERVICE  
(continued)  
• The “FRAME LOCK” message on the dialog means the frame lock  
function is working.  
• This item can't be selected for no signal and sync out.  
• When the MY TEXT DISPLAY is set to ON, the MY TEXT is  
displayed together with the input information in the INPUT_  
INFORMATION box ( 77).  
FACTORY RESET  
Selecting OK using the ► button performs this function. By  
this function, all the items in all of menus will collectively return  
to the initial setting. Note that the items LAMP TIME, FILTER  
TIME, LANGUAGE, FILTER MESSAGE, STANDBY MODE,  
SCHEDULE,AUTO BLANK, NETWORK and SECURITY settings are  
not reset.  
CANCEL OK  
ð
Be sure to set ALTITUDE after resetting all the settings ( 64).  
71  
NETWORK menu  
NETWORK menu  
See the Network Guide for details of NETWORK operation.  
Remember that incorrect network settings on this projector may cause trouble on  
the network. Be sure to consult with your network administrator before connecting  
to an existing access point on your network.  
72  
SECURITY menu  
SECURITY menu  
This projector is equipped with security functions.  
From the SECURITY menu, items shown in the table  
below can be performed.  
To use SECURITY menu: User registration is required  
before using the security functions.  
Enter to the SECURITY menu  
1. Press the ► button. The ENTER PASSWORD box will be displayed.  
2. Use the ▲/▼/◄/► buttons to enter the registered password. The  
factory default password is as follows.  
CP-BX301WN: 9830  
CP-BW301WN : 8230  
This password can be changed  
the right side of the ENTER PASSWORD box and press the ►  
button to display the SECURITY menu.  
. Move the cursor to  
below)  
(
• It is strongly recommended the factory default password to be  
changed as soon as possible.  
• If an incorrect password is input, the ENTER PASSWORD box  
will be displayed again. If incorrect password is input 3 times, the  
projector will turn off. Afterwards the projector will turn off every time  
an incorrect password is input.  
3. Items shown in the table below can be performed.  
If you have forgotten your password  
(1). While the ENTER PASSWORD box is displayed, press and hold  
the RESET button on the remote control for about 3 seconds or  
press and hold the INPUT button for 3 seconds while pressing the  
► button on the projector.  
(2). The 10 digit Inquiring Code will be displayed. Contact your dealer  
with the 10 digit Inquiring Code. Your password will be sent after  
your user registration information is confirmed.  
• If there is no key input for about 55 seconds while the Inquiring Code is displayed, the menu will  
close. If necessary, repeat the process from (1).  
Item  
Description  
(1) Use the ▲/▼ buttons on the SECURITY menu  
to select SECURITY PASSWORD CHANGE  
and press the ► button to display the ENTER  
NEW PASSWORD box.  
(2) Use the ▲/▼/◄/► buttons to enter the new password.  
(3) Move the cursor to the right side of the ENTER  
NEW PASSWORD box and press the ► button  
to display the NEW PASSWORD AGAIN box,  
enter the same password again.  
(4) Move the cursor to the right side of the NEW  
PASSWORD AGAIN box and press the ►  
button and the NOTE NEW PASSWORD box  
will be displayed for about 30 seconds, please  
make note of the password during this time.  
SECURITY  
PASSWORD  
CHANGE  
Pressing the ENTER button on the remote control or  
button on the  
projector will close the NOTE NEW PASSWORD box.  
• Please do not forget your password.  
(continued on next page)  
73  
SECURITY menu  
Item  
Description  
The MyScreen PASSWORD function can be used to prohibit access to the  
MyScreen function and prevent the currently registered MyScreen image  
from being overwritten.  
1 Turning on the MyScreen PASSWORD  
1-1 Use the ▲/▼ buttons on the SECURITY menu to  
select MyScreen PASSWORD and press the ►  
button to display the MyScreen PASSWORD on/  
off menu.  
1-2 Use the ▲/▼ buttons on the MyScreen  
PASSWORD on/off menu to select ON.  
The ENTER NEW PASSWORD box (small)  
will be displayed.  
ENTER NEW PASSWORD  
box (small)  
1-3 Use the ▲/▼/◄/► buttons to enter the  
password. Move the cursor to the right side  
of the ENTER NEW PASSWORD box (small)  
and press the ► button to display the NEW  
PASSWORD AGAIN box, enter the same  
PASSWORD again.  
1-4 Move the cursor to the right side of the  
NEW PASSWORD AGAIN box and press  
the ► button to display the NOTE NEW  
PASSWORD box for about 30 seconds,  
please make note of the password during  
this time.  
Pressing the ENTER button on the remote control or ► button on the  
MyScreen  
PASSWORD  
projector will return to MyScreen PASSWORD on/off menu.  
When a password is set for MyScreen:  
The MyScreen registration function (and menu) will be unavailable.  
The MyScreen Lock menu will be unavailable.  
The START UP setting will be locked on MyScreen (and the menu will be  
unavailable).  
Turning the MyScreen PASSWORD off will allow normal operation of these  
functions.  
Please do not forget your MyScreen PASSWORD.  
2 Turning off the MyScreen PASSWORD  
2-1 Follow the procedure in 1-1 to display the MyScreen PASSWORD on/off  
menu.  
2-2 Select OFF to display the ENTER  
PASSWORD box (large). Enter the registered  
password and the screen will return to the  
MyScreen PASSWORD on/off menu.  
ENTER PASSWORD box  
(large)  
If an incorrect PASSWORD is input, the menu will  
close. If necessary, repeat the process from 2-1.  
3 If you have forgotten your password  
3-1 Follow the procedure in 1-1 to display the MyScreen PASSWORD on/off  
menu.  
3-2 Select OFF to display the ENTER PASSWORD box (large). The 10 digit  
Inquiring Code will be displayed inside the box.  
3-3 Contact your dealer with the 10 digit Inquiring Code. Your password will  
be sent after your user registration information is confirmed.  
(continued on next page)  
74  
SECURITY menu  
Item  
Description  
PIN LOCK is a function which prevents the projector from being used unless  
a registered Code is input.  
1 Turning on the PIN LOCK  
1-1 Use the ▲/▼ buttons on the SECURITY menu  
to select PIN LOCK and press the ► button or  
the ENTER button to display the PIN LOCK on/off  
menu.  
1-2 Use the ▲/▼ buttons on the PIN LOCK on/  
off menu to select ON and the Enter PIN  
Code box will be displayed.  
1-3 Input a 4 part PIN code using the ▲/▼/◄/►,  
COMPUTER or INPUT button.  
The PIN Code again box will appear.  
Reenter the same PIN code. This will complete  
the PIN code registration.  
If there is no key input for about 55 seconds  
while the Enter PIN Code box or the PIN Code again box is displayed,  
the menu will close. If necessary, repeat the process from 1-1.  
Afterwards, anytime the projector is restarted after AC power is turned off  
the Enter PIN Code box will be displayed. Enter the registered PIN code.  
The projector can be used after entering the registered PIN code. If an  
incorrect PIN code is input, the Enter PIN code box will be displayed again.  
If an incorrect PIN code is input 3 times, the projector will turn off. Afterwards  
the projector will turn off every time an incorrect PIN code is input. The  
projector will also turn off if there is no key input for about 5 minutes while  
the Enter PIN code box is displayed.  
PIN LOCK  
This function will activate only when the projector is started after AC power  
is turned off.  
Please do not forget your PIN code.  
2 Turning off the PIN LOCK  
2-1 Follow the procedure in 1-1 to display the PIN LOCK on/off menu.  
2-2 Use the ▲/▼ buttons to select OFF and the Enter PIN Code box will be  
displayed.  
Enter the registered PIN code to turn the PIN LOCK function off.  
If an incorrect PIN code is input 3 times, the projector will turn off.  
3 If you have forgotten your PIN code  
3-1 While the Enter PIN code box is displayed, press and hold the RESET  
button for 3 seconds or press and hold the INPUT button for 3 seconds  
while pressing the ► button on the projector.  
The 10 digit Inquiring Code will be displayed.  
If there is no key input for about 5 minutes  
while the Inquiring Code is displayed, the  
projector will turn off.  
3-2 Contact your dealer with the 10 digit Inquiring Code. Your PIN code will  
be sent after your user registration information is confirmed.  
(continued on next page)  
75  
SECURITY menu  
Item  
Description  
The MY TEXT PASSWORD function can prevent the MY TEXT from being  
overwritten. When the password is set for the MY TEXT;  
• The MY TEXT DISPLAY menu will be unavailable, which can prohibit  
changing the DISPLAY setting.  
• The MY TEXT WRITING menu will be unavailable, which can prevent the  
MY TEXT from being overwritten.  
1 Turning on the MY TEXT PASSWORD  
1-1 Use the ▲/▼ buttons on the SECURITY menu to  
select the MY TEXT PASSWORD and press the  
► button to display the MY TEXT PASSWORD  
on/off menu.  
1-2 Use the ▲/▼ buttons on the MY TEXT  
PASSWORD on/off menu to select ON. The  
ENTER NEW PASSWORD box (small) will  
be displayed.  
1-3 Use the ▲/▼/◄/► buttons to enter the  
password. Move the cursor to the right side  
of the ENTER NEW PASSWORD box (small)  
and press the ► button to display the NEW  
PASSWORD AGAIN box, and then enter the  
same password again.  
ENTER NEW PASSWORD  
box (small)  
1-4 Move the cursor to the right side of the NEW  
PASSWORD AGAIN box and press ► button  
to display the NOTE NEW PASSWORD box  
for about 30 seconds, then please make note  
of the password during this time.  
MY TEXT  
PASSWORD  
Pressing the ENTER button on the remote control or ► button on the  
projector will return to the MY TEXT PASSWORD on/off menu.  
2 Turning off the MY TEXT PASSWORD  
2-1 Follow the procedure in 1-1 to display the MY TEXT PASSWORD on/off  
menu.  
2-2 Select OFF to display the ENTER  
PASSWORD box (large). Enter the registered  
password and the screen will return to the  
MY TEXT PASSWORD on/off menu.  
ENTER PASSWORD box  
(large)  
If an incorrect password is input, the menu will close.  
If necessary, repeat the process from 2-1  
3 If you have forgotten your password  
3-1 Follow the procedure in 1-1 to display the MY TEXT PASSWORD on/off  
menu.  
3-2 Select OFF to display the ENTER PASSWORD box (large). The 10 digit  
inquiring code will be displayed inside the box.  
3-3 Contact your dealer with the 10 digit inquiring code. Your password will  
be sent after your user registration information is confirmed.  
(continued on next page)  
76  
SECURITY menu  
Item  
Description  
(1) Use the ▲/▼ buttons on the SECURITY menu to  
select the MY TEXT DISPLAY and press the ► or  
ENTER button to display the MY TEXT DISPLAY  
on/off menu.  
(2) Use the ▲/▼ buttons on the MY TEXT DISPLAY on/off menu to select  
on or off.  
ON  
OFF  
ó
MY TEXT  
DISPLAY  
When it is set ON, the MY TEXT will be displayed  
on the START UP screen and the INPUT_  
INFORMATION when the INFORMATION on the  
SERVICE menu is chosen.  
• This function is available only when the MY TEXT  
PASSWORD function is set to the OFF.  
(1) Use the ▲/▼ buttons on the  
SECURITY menu to select the MY  
TEXT WRITING and press the ►  
button. The MY TEXT WRITING dialog  
will be displayed.  
(2) The current MY TEXT will be displayed  
on the first 3 lines. If not yet written, the  
lines will be blank.  
Use the ▲/▼/◄/► buttons and the  
ENTER or INPUT button to select and  
enter characters. To erase 1 character  
at one time, press the RESET button or  
press the ◄ and INPUT button at the  
same time. Also if you move the cursor  
to DELETE or ALL CLEAR on screen  
and press the ENTER or INPUT button,  
1 character or all characters will be  
MY TEXT  
WRITING  
erased. The MY TEXT can be input up  
to 24 characters on each line.  
(3) To change an already inserted  
character, press the ▲/▼ button to  
move the cursor to one of the first 3  
lines, and use the ◄/► buttons to  
move the cursor on the character to be  
changed.  
After pressing the ENTER or INPUT button, the character is selected.  
Then, follow the same procedure as described at the item (2) above.  
(4) To nish entering text, move the cursor to the OK on screen and press  
the ►, ENTER or INPUT button. To revert to the previous MY TEXT  
without saving changes, move the cursor to the CANCEL on screen and  
press the ◄, ENTER or INPUT button.  
The MY TEXT WRITING function is available only when the MY TEXT  
PASSWORD function is set to OFF.  
The CLONING operation under OPTION_SERVICE menu is not available if  
ON is selected.  
CLONING LOCK  
77  
Presentation tools  
Presentation tools  
The projector has the following convenient tools that enable on-screen  
presentations easily and quickly:  
- PC-LESS Presentation (below)  
- Drawing function  
Drawing function enables you to draw on the projector’s screen with  
USBmouse or tablets connected to the USB TYPE A ports. For details, refer to  
the manual for peripheral equipment.  
- USB Display (88, 92)  
PC-LESS Presentation  
The PC-LESS Presentation reads image and audio data from the storage media  
inserted into the USB TYPE A port and displays the image in the following modes.  
The PC-LESS Presentation can be started by selecting the USB TYPE A port as  
the input source.  
This feature allows you to make your presentations without using your computer.  
- Thumbnail mode (79)  
- Full Screen mode (83)  
- Slideshow mode (85)  
[Supported storage media]  
• USB memory (USB memory type, USB hard disk and USB card reader type)  
NOTE • USB readers (adapters) that have more than one USB slot may not  
work (if the adapter is acknowledged as multiple devices connected).  
• USB devices with security software may not work.  
• Be careful when inserting or removing a USB device. (14, 81)  
[Supported format]  
• FAT12, FAT16 and FAT32  
NOTE • NTFS is not supported.  
78  
Presentationtools  
PC-LESS Presentation (continued)  
[Supported file format and its extension]  
• JPEG (.jpeg, .jpg)  
• Bitmap (.bmp)  
• PNG (.png)  
* Progressive is not supported.  
* 16bit mode and compressed bitmap is not supported.  
* Interlace PNG is not supported.  
• GIF (.gif)  
• Movie (.avi, .mov)  
*
Supported video format: Motion-JPEG  
Supported audio format: WAV (Linear PCM, Stereo 16bit),  
IMA-ADPCM  
NOTE • Files with a resolution larger than the following are not supported.  
CP-BX301WN : 1024 x 768 (Still)768 x 576 (Movie)  
CP-BW301WN : 1280 x 800 (Still)768 x 576 (Movie)  
(* Some computers may not support 1280 x 800.)  
• Files with a resolution smaller than 36 x 36 are not supported.  
• Files with a resolution smaller than 100 x 100 may not be displayed.  
• Movie images with a frame rate higher than 15 fps cannot be displayed.  
• Movie images with a bit rate higher than 20 Mbps cannot be displayed.  
• Some supported files may not be displayed.  
• Only a frame appears when the content of image data cannot be displayed in  
the Thumbnail mode.  
• Even with the file format and audio format combinations described above,  
playback of some files may fail.  
Thumbnail mode  
The Thumbnail mode displays the images stored in a USB storage device on the  
Thumbnail screen. Maximum 20 images are displayed in a screen.  
If you wish, you can jump into the Full Screen mode or Slideshow mode, after you  
select some images in the Thumbnail mode.  
The Thumbnail mode will be started as the primary function of the PC-LESS  
Presentation after selecting the USB TYPE A port as the input source.  
Selected image  
Thumbnail menu  
Thumbnail images  
79  
Presentation tools  
PC-LESS Presentation (continued)  
Operating by buttons or keys  
You can control the images on the Thumbnail screen with the remote control,  
control panel or Web Remote Control. The following functions can be supported  
while the Thumbnail is displayed.  
Button operation  
Functions  
Web Remote  
Control  
The remote  
control  
Control panel  
▲/▼/◄/►  
▲/▼/◄/►  
[▲]/[▼]/[◄]/[►] Move cursor  
PAGE UP  
PAGE DOWN  
[PAGE UP]  
-
Switches pages  
[PAGE DOWN]  
• Displays the selected image  
on the Full Screen mode when a  
cursor is on a thumbnail image.  
• Displays the setup menu  
ENTER  
INPUT  
[ENTER]  
(
below) for the selected image  
when a cursor is on a thumbnail  
image number.  
The setup menu for the selected image  
Use the ◄/► cursor buttons to switch each setting or use the ► cursor button to execute  
the functions as follows.  
Item  
Functions  
RETURN Press the ► cursor button or ENTER to return to the Thumbnail screen.  
Switch to ON to set the selected image as the first image in the  
Slideshow. This setting information will be saved in the “playlist.txtfile  
START  
(87).  
Switch to ON to set the selected image as the last image in the  
Slideshow. This setting information will be saved in the “playlist.txtfile  
(87).  
STOP  
SKIP  
Switch to ON to skip the selected image in the Slideshow. This setting  
information will be saved in the “playlist.txtfile (87).  
Press the ► cursor or ENTER button to rotate the selected still image  
ROTATE 90 degrees clockwise. This setting information will be saved in the  
“playlist.txtfile (87).  
80  
Presentation tools  
PC-LESS Presentation (continued)  
Operating by the menu on the Thumbnail screen  
You can also control the images by using the menu on the Thumbnail screen.  
Item  
Functions  
Moves to an upper folder.  
SORT  
Allows you to sort files and folders as following.  
Press the ► cursor button or ENTER to return to the Thumbnail  
screen.  
RETURN  
NAME UP  
Sorts in ascending order by file name.  
NAME DOWN Sorts in descending order by file name.  
DATE UP  
Sorts in ascending order by file date.  
Sorts in descending order.by file date.  
Go to previous / next page.  
DATE DOWN  
▲/▼  
SLIDESHOW  
RETURN  
Configures and starts the Slideshow ( 85).  
Press the ► cursor button or ENTER to return to the Thumbnail  
screen.  
PLAY  
Press the ► cursor button or ENTER to start the Slideshow.  
Sets the beginning number of the Slideshow.  
Sets the end number of the Slideshow.  
START  
STOP  
Sets the interval time for displaying still images during the  
Slideshow.  
INTERVAL  
PLAY MODE  
INPUT  
Selects the Slideshow mode.  
Switches the input port.  
Displays the menu.  
MENU  
Be sure to use this function before removing USB storage device  
from the projector. After that, the projector will not recognize a  
USB storage device until you insert it again into the USB TYPE A  
input port.  
REMOVE USB  
Turns the sound on/off for files that contain audio data.  
/
81  
Presentation tools  
PC-LESS Presentation (continued)  
NOTE These operations are not accessible while the projector OSD is displayed.  
• The Thumbnail mode is able to display up to 20 files in one page.  
• It is not possible to change the input port by using the INPUT button when the  
Thumbnail screen, Slideshow, or Full Screen is displayed.  
• The image quality may deteriorate when playing back audio data included in  
a movie. If you want to give priority to the image quality, turn off the sound by  
setting ♪ to off.  
• If one of the AUDIO IN ports is selected or is selected for USB TYPE A in  
AUDIO SOURCE of the AUDIO menu (50), ♪ cannot be operated.  
• Some error icons will be displayed in the Thumbnail.  
This file seems to be broken or not supported format.  
A file that cannot be displayed on the  
thumbnail screen is indicated by a file  
format icon.  
82  
Presentation tools  
PC-LESS Presentation (continued)  
Full Screen Mode  
The Full Screen mode shows a full display image. To display in Full Screen mode,  
select an image in the Thumbnail screen. Then press the ENTER button on the  
remote control, the INPUT button on the control panel or click [ENTER] on the  
Web Remote Control.  
Full screen display  
Operations for still images  
The following operations are enabled in the Full Screen mode while a still image  
is displayed.  
Button operation  
Functions  
Web Remote  
Control  
The remote  
control  
Control panel  
or  
[▼]  
[►]  
or  
or  
Shows the next file.  
PAGE DOWN  
[PAGE DOWN]  
or  
[▲]  
[◄]  
or  
or  
Shows the previous file.  
Displays Thumbnail.  
PAGE UP  
[PAGE UP]  
ENTER  
INPUT  
[ENTER]  
83  
Presentation tools  
PC-LESS Presentation (continued)  
Operations for movie  
A remote control icon and a progress bar are  
displayed when one of the cursor buttons, ENTER  
button or INPUT button on the remote control, control  
panel or Web Remote Control is pressed or clicked while a movie is playing in the  
Full Screen mode. The following operations are enabled while the remote control  
icon and progress bar are displayed.  
Button operation  
Functions  
Web Remote  
Control  
The remote  
control  
Control panel  
[▲]  
(Play) /  
(Pause) toggle  
[►]  
(FF) Fast-forward  
[◄]  
(REW) Fast-rewind  
ENTER  
INPUT  
[ENTER]  
(Stop), Displays Thumbnail.  
PAGE DOWN  
PAGE UP  
[PAGE DOWN] Shows the next file.  
[PAGE UP] Shows the previous file.  
NOTE These operations are not accessible while the projector OSD is displayed.  
• It is not possible to change the input port by using the INPUT button when the  
Thumbnail screen, Slideshow, or Full Screen is displayed.  
84  
Presentation tools  
PC-LESS Presentation (continued)  
Slideshow mode  
The Slideshow mode displays images in full screen and switches the images at  
intervals set in INTERVAL on the Thumbnail screen menu (80).  
You can start this function from the Slideshow menu. To display the Slideshow  
menu, select the SLIDESHOW button in the Thumbnail mode and press the  
ENTER button on the remote control, INPUT button on the control panel, or click  
[ENTER] on the Web Remote Control.  
While the Slideshow is displayed, the following button operations are enabled  
when still images are displayed, and the same button operations in the Full  
Screen mode are enabled when movies are displayed.  
Button operation  
Functions  
Displays thumbnail  
Web Remote  
Control  
The remote  
control  
Control panel  
ENTER  
INPUT  
[ENTER]  
NOTE • These operations are not accessible while the projector OSD is  
displayed.  
• It is not possible to change the input port by using the INPUT button when the  
Thumbnail screen, Slideshow, or Full Screen is displayed.  
• When the Slideshow mode is set to ONE TIME and the last file is a still image,  
the last slide of the presentation will remain displayed until the ENTER button  
on the remote control or Web Remote Control, or the INPUT button on the  
control panel is pressed.  
85  
Presentation tools  
PC-LESS Presentation (continued)  
You can play the Slideshow at your desired configuration.  
Configure the Slideshow items in the Thumbnail.  
1) RETURN  
2) PLAY  
: Returns to the thumbnail mode.  
: Play the Slideshow.  
3) START  
:
Set the beginning number of the  
Slideshow.  
4) STOP  
5) INTERVAL  
: Set the end number of the Slideshow.  
: Sets the interval time for displaying still  
images during the Slideshow.  
It is not recommend to set the interval  
time very short something like several  
seconds, because it may take more than  
several seconds to read and display an  
image file if it is stored in very deep layer  
directory or if so many files are stored in  
the same directory.  
6) PLAY MODE : Select the Slideshow mode.  
ONE TIME : Play the Slideshow one time.  
ENDLESS : Play the Slideshow endless.  
NOTE • The settings of the Slideshow are saved to the “playlist.txt” file  
that is stored in the storage media. If the file is not existed, it is generated  
automatically.  
• The settings for the START, STOP, INTERVAL, and PLAY MODE are saved to  
the Playlist.  
• If the storage media is under the write protection or the “playlist.txt” is the  
read only type file, it is impossible to change the settings of the Slideshow.  
86  
Presentation tools  
PC-LESS Presentation (continued)  
Playlist  
The Playlist is a DOS format text file, which decides the order of displayed still  
image files in the Thumbnail or Slideshow.  
The playlist file name is “playlist.txt” and it can be edited on a computer.  
It is created in the folder that contains the selected image files when the PC-LESS  
Presentation is started or the Slideshow is configured.  
[Example of playlist.txtfiles]  
START setting : STOP setting : INTERVAL setting : PLAY MODE setting :  
img001.jpg: : : :  
img002.jpg:600: : :  
img003.jpg:700:rot1: :  
img004.jpg: : :SKIP:  
img005.jpg:1000:rot2:SKIP:  
The “playlist.txt” file contains the following information.  
Each piece of information requires to be separated by “:”, and “:” at the end of  
each line.  
1st line: START, STOP, INTERVAL and PLAY MODE settings (86).  
2nd line and after: file name, interval time, rotation setting and skip setting.  
interval time: It can be set from 0 to 999900 (ms) with an increment of  
100 (ms).  
rotation setting: “rot1” means a rotation at 90 degrees clockwise; “rot2”  
and “rot3” increase another 90 degrees in order.  
skip setting: “SKIP” means that the image will not be displayed in the  
Slideshow.  
NOTE The maximum length in a line on the "playlist.txt" file is 255 characters  
including linefeed. If any line exceeds the limit, the "playlist.txt" file becomes invalid.  
Up to 999 files can be registered to the Playlist. However, if some folders exist in  
the same directory the limit number is decreased by the number of folders.  
Any files over the limit will not be shown in the Slideshow.  
If the storage device is protected or does not have sufficient space, the “playlist.txt”  
file cannot be created.  
• For the Slideshow settings, refer to the section Slideshow mode (85).  
87  
Presentation tools  
USB Display(Windows computer)  
The projector can display images transferred from a computer via an USB cable (11).  
Hardware and software requirement for computer  
OS: One of the following.  
Windows ® XP Home Edition /Professional Edition  
Windows Vista ® Home Basic /Home Premium /Business /Ultimate /Enterprise  
Windows ® 7 Starter /Home Basic /Home Premium /Professional / Ultimate /  
Enterprise  
CPU: Pentium 4 (2.8 GHz or higher)  
Graphic card: 16 bit, XGA or higher  
Memory: 512 MB or higher  
Hard disk space: 30 MB or higher  
USB Port  
USB cable : 1 piece  
Starting USB Display  
When you connect your computer to the USB TYPE B port on the projector  
using a USB cable, the projector will be recognized as a CD-ROM drive on your  
computer. Then, the software in the projector, “LiveViewerLiteForUSB.exe”, will  
run automatically and the application, “LiveViewer Lite for USB”, will be ready on  
your computer for the USB Display. The application, “LiveViewer Lite for USB”, will  
close automatically when the USB cable is unplugged. However, it may remain  
displayed at times.  
NOTE • If the software does not start automatically (this is typically because  
CD-ROM autorun is disabled on your OS), follow the instructions below.  
(1) Click on the [Start] button on the toolbar and select the “Run”  
(2) Enter F:\LiveViewerLiteForUSB.exe and then press the [OK]  
If your CD-ROM drive is not drive F on your computer, you will  
need to replace F with the correct drive letter assigned to your  
CD-ROM drive.  
• CD-ROM autorun is disabled while the screen saver is running.  
• The image transmission from the computer is suspended while the password-  
protected screen saver is running. To resume the transmission, exit the screen  
saver.  
If "Waiting for connection." remains displayed while the USB cable is connected,  
remove the USB cable and reconnect after a while.  
• Check our web site for the latest version of the software and its manual.  
(User's Manual (concise))  
Follow the instructions that can be obtained at the site for updating.  
(continued on next page)  
88  
Presentation tools  
USB Display(Windows computer) (continued)  
This application will appear in the Windows  
notification area once it starts. You can quit the  
application from your computer by selecting “Quit” on  
the menu.  
NOTE • The “LiveViewer” (refer to the  
Network Guide) and this application cannot  
be used at the same time. If you connect your  
computer to the projector by using a USB cable  
while the “LiveViewer” is running, the following message will be displayed.  
• Depending on the software installed on your computer, images on your  
computer cannot be transferred using “LiveViewer Lite for USB”.  
• If any application software having the firewall function is installed into your  
computer, make the firwall function invalid with following the user's manual.  
• Some security software may block image transmission. Please change the  
security software setting to allow the use of "LiveViewer Lite for USB".  
• When the audio input from USB TYPE B is selected, if the sound level is still  
low even after raising the volume level in the projector to the maximum, check  
whether your computer outputs audio and raise the volume level accordingly.  
• If the computer in use is equipped with HDMI port, the audio setting will be  
changed and sound interruption or noise may occur when the HDMI cable is  
connected or disconnected during USB Display. Restart USB Display for this  
case.  
• Image distortion or sound interruption may occur when “LiveVieweris  
connected to LAN (wireless or wired) during USB Display. The above decline in  
performance is noticeable especially when multiple computers are connected to  
“LiveViewer.  
89  
Presentation tools  
USB Display(Windows computer) (continued)  
Right-Click menu  
The menu shown in the right will be displayed  
when you right-click the application icon in the  
Windows notification area.  
Display : The Floating menu is displayed, and the icon disappears from the  
Windows notification area.  
Quit  
: The application is closed, and the icon disappears from the Windows  
notification area.  
NOTE • If you wish to restart the application, you need to unplug the USB  
cable and plug it again.  
Floating menu  
If you select “Display” on the Right-Click  
menu, the Floating menu shown in the right  
will appear on your computer screen.  
Start capture button  
The transmission to the projector is started  
and the images will be displayed.  
Stop button  
The image transmission is stopped.  
Hold button  
The image on the projector’s screen is temporally frozen. The last image before  
the button is clicked is remained on the screen. You can revise the image data  
on your computer without showing it on the projector's screen.  
Option button  
The Options window is displayed.  
Minimize button  
The Floating menu is closed, and the icon reappears in the Windows notification  
area.  
NOTE • If you click the Start capture button and/or Stop button repeatedly,  
images may not be displayed on the screen.  
90  
Presentation tools  
USB Display(Windows computer) (continued)  
Options window  
If you select the Option button on the Floating  
menu, the Options window is displayed.  
Optimize Performance  
The “LiveViewer Lite for USB” captures  
screenshots in JPEG data and sends them to  
the projector. The “LiveViewer Lite for USB” has  
two options that have different compression rate  
of JPEG data.  
Transmission speed  
Speed takes priority over Image quality.  
It makes JPEG compression rate higher.  
The screen on the projector is rewritten quicker because the transferred  
data is smaller, but the image quality is worse.  
Image quality  
Image quality takes priority over Speed.  
It makes JPEG compression rate lower.  
The screen on the projector is rewritten slower because the transferred  
data is larger, but the image quality is better.  
Keep PC resolution  
If you remove the check mark from the [Keep PC resolution] box, the screen  
resolution of your computer will be switched as follows, and the display speed  
may be faster.  
CP-BX301WN: 1024 x 768 (XGA)  
CP-BW301WN: 1280 x 800 (WXGA)  
If your computer does not support the display resolution specified above, a  
smaller resolution that is the largest among the resolutions that are supported by  
the computer will be selected.  
Sound  
Turns the sound on/off. The image quality may deteriorate when you play back  
audio data transferred together with the image data. To give priority to the image  
quality, turn off the sound by selecting the checkbox.  
Display LiveViewer Lite for USB  
If you want to display the "LiveViewer Lite for USB" application window on the  
screen, please check the box.  
About  
The version information of the “LiveViewer Lite for USB”.  
NOTE • When the resolution is changed, the arrangement of icons on  
computer desktop screen may be changed.  
• If one of the AUDIO IN ports is selected or is selected for USB TYPE B  
in AUDIO SOURCE of the AUDIO menu (50), audio sound operation in the  
Options window will be disabled.  
91  
Presentation tools  
USB Display(Mac computer)  
The projector can display images transferred from a computer via an USB cable (11).  
Hardware and software requirement for computer  
OS: Mac OSX 10.5(Intel)  
Mac OSX 10.6(Intel)  
Mac OSX 10.7(Intel)  
This application is not compatible with Power PC.  
Graphic card: 16 bit, XGA or higher  
Memory: 512 MB or higher  
Hard disk space: 30 MB or higher  
Starting USB Display  
When you connect your computer to the USB TYPE B port on the projector  
using a USB cable, the projector will be  
recognized as a CD-ROM drive on your  
computer. Double click the CD-ROM, then  
double click  
"LiveViewerLiteForUSB_MacOS.app.".  
The application, “LiveViewer Lite for USB”,  
will close automatically when the USB cable is unplugged. However, it may remain  
displayed at times.  
NOTE • The image transmission from the computer is suspended while the  
password-protected screen saver is running. To resume the transmission, exit  
the screen saver.  
If "Waiting for connection." remains displayed while the USB cable is connected,  
remove the USB cable and reconnect after a while.  
• Check our web site for the latest version of the software and its manual.  
(User's Manual (concise))  
Follow the instructions that can be obtained at the site for updating.  
(continued on next page)  
92  
Presentation tools  
USB Display(Mac computer) (continued)  
NOTE • The “LiveViewer” (refer to the  
Network Guide) and this application cannot be used  
at the same time. If you connect your computer  
to the projector by using a USB cable while the  
“LiveViewer” is running, the following message will  
be displayed.  
• Depending on the software installed on your computer, images on your  
computer cannot be transferred using “LiveViewer Lite for USB”.  
• If any application software having the firewall function is installed into your  
computer, make the firwall function invalid with following the user's manual.  
• Some security software may block image transmission. Please change the  
security software setting to allow the use of "LiveViewer Lite for USB".  
• When the audio input from USB TYPE B is selected, if the sound level is still  
low even after raising the volume level in the projector to the maximum, check  
whether your computer outputs audio and raise the volume level accordingly.  
• If the computer in use is equipped with HDMI port, the audio setting will be  
changed and sound interruption or noise may occur when the HDMI cable is  
connected or disconnected during USB Display. Restart USB Display for this  
case.  
• Image distortion or sound interruption may occur when “LiveVieweris  
connected to LAN (wireless or wired) during USB Display. The above decline in  
performance is noticeable especially when multiple computers are connected to  
“LiveViewer.  
93  
Presentation tools  
USB Display(Mac computer) (continued)  
Menu  
   
If you select “Display” on the Right-Click menu, the Floating menu shown in the  
right will appear on your computer screen.  
Start capture button  
The transmission to the projector is started  
and the images will be displayed.  
Stop button  
The image transmission is stopped.  
Hold button  
The image on the projector’s screen is temporally frozen. The last image before  
the button is clicked is remained on the screen. You can revise the image data  
on your computer without showing it on the projector's screen.  
Option button  
The Options window is displayed.  
Minimize button  
The Floating menu is closed, and the icon reappears in the Windows notification  
area.  
Exit button  
The Floating menu is closed.  
NOTE • If you click the Start capture button and/or Stop button repeatedly,  
images may not be displayed on the screen.  
94  
Presentation tools  
USB Display(Mac computer) (continued)  
Options window  
If you select the Option button on the Floating  
menu, the Options window is displayed.  
Optimize Performance  
The “LiveViewer Lite for USB” captures  
screenshots in JPEG data and sends them to  
the projector. The “LiveViewer Lite for USB” has  
two options that have different compression rate  
of JPEG data.  
Transmission speed  
Speed takes priority over Image quality.  
It makes JPEG compression rate higher.  
The screen on the projector is rewritten quicker because the transferred  
data is smaller, but the image quality is worse.  
Image quality  
Image quality takes priority over Speed.  
It makes JPEG compression rate lower.  
The screen on the projector is rewritten slower because the transferred  
data is larger, but the image quality is better.  
Keep PC resolution  
If you remove the check mark from the [Keep PC resolution] box, the screen  
resolution of your computer will be switched as follows, and the display speed  
may be faster.  
CP-BX301WN: 1024 x 768 (XGA)  
CP-BW301WN: 1280 x 800 (WXGA)  
If your computer does not support the display resolution specified above, a  
smaller resolution that is the largest among the resolutions that are supported by  
the computer will be selected.  
Sound  
Turns the sound on/off. The image quality may deteriorate when you play back  
audio data transferred together with the image data. To give priority to the image  
quality, turn off the sound by selecting the checkbox.  
About  
The version information of the “LiveViewer Lite for USB”.  
NOTE • When the resolution is changed, the arrangement of icons on  
computer desktop screen may be changed.  
• If one of the AUDIO IN ports is selected or is selected for USB TYPE B  
in AUDIO SOURCE of the AUDIO menu (50), audio sound operation in the  
Options window will be disabled.  
95  
Maintenance  
Maintenance  
Replacing the lamp  
A lamp has finite product life. Using the lamp for long periods of time could cause  
the pictures darker or the color tone poor. Note that each lamp has a different  
lifetime, and some may burst or burn out soon after you start using them.  
Preparation of a new lamp and early replacement are recommended. To prepare  
a new lamp, make contact with your dealer and tell the lamp type number.  
Type number : DT01511 <CP-BX301WN>  
Type number : DT01411 <CP-BW301WN>  
Replacing the lamp  
lamp cover  
Turn the projector off, and unplug the power cord.  
Allow the projector to cool for at least 45 minutes.  
1.  
Prepare a new lamp. If the projector is mounted on  
a ceiling, or if the lamp has broken, also ask the  
dealer to replace the lamp.  
2.  
In case of replacement by yourself, follow the following procedure.  
Loosen the screw (marked by arrow) of the lamp  
3.  
cover and then slide and lift the lamp cover to the  
side to remove it.  
Loosen the 2 screws (marked by arrow) of the lamp,  
and slowly pick up the lamp by the handle. Never  
loosen any other screws.  
4.  
Insert the new lamp, and retighten firmly the 2  
screws of the lamp that are loosened in the previous  
process to lock it in place.  
5.  
While putting the interlocking parts of the lamp cover  
and the projector together, slide the lamp cover back in  
place. Then firmly fasten the screw of the lamp cover.  
6.  
Turn the projector on and reset the lamp time using  
the LAMP TIME item in the SETUP menu.  
(1) Press the MENU button to display a menu.  
(2) Point at the ADVANCED MENU in the menu using  
the ▼/▲ button, then press the ► button.  
7.  
(3) Point at the SETUP in the left column of the menu  
using the ▼/▲button, then press the ► button.  
Handle  
(4) Point at the LAMP TIME using the ▼/▲ button, then press the ► button. A dialog will appear.  
(5) Press the ► button to select “OK” on the dialog. It performs resetting the lamp time.  
CAUTION ►Do not touch any inner space of the projector, while the lamp  
is taken out.  
NOTE • Please reset the lamp time only when you have replaced the lamp,  
for a suitable indication about the lamp.  
96  
Maintenance  
Replacing the lamp (continued)  
Lamp warning  
HIGH TEMPERATURE  
HIGH PRESSURE  
HIGH VOLTAGE  
WARNING The projector uses a high-pressure mercury glass lamp. The lamp  
can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or  
worn over time. Note that each lamp has a different lifetime, and some may burst or  
burn out soon after you start using them. In addition, if the bulb bursts, it is possible  
for shards of glass to fly into the lamp housing, and for gas containing mercury and  
dust containing fine particles of glass to escape from the projector’s vent holes.  
About disposal of a lamp: This product contains a mercury lamp; do not put  
it in a trash. Dispose of it in accordance with environmental laws.  
• For lamp recycling, go to www.lamprecycle.org (in the US).  
• For product disposal, consult your local government agency  
or www.eiae.org (in the US) or www.epsc.ca (in Canada).  
For more information, call your dealer.  
• If the lamp should break (it will make a loud bang when it does),  
unplug the power cord from the outlet, and make sure to request a  
replacement lamp from your local dealer. Note that shards of glass  
could damage the projector’s internals, or cause injury during handling,  
so please do not try to clean the projector or replace the lamp yourself.  
If the lamp should break (it will make a loud bang when it does), ventilate the  
Disconnect  
the plug  
from the  
power  
room well, and make sure not to inhale the gas or fine particles that come out  
from the projector's vent holes, and not to get them into your eyes or mouth.  
• Before replacing the lamp, turn the projector off and unplug the power  
cord, then wait at least 45 minutes for the lamp to cool sufficiently.  
Handling the lamp while hot can cause burns, as well as damaging the lamp.  
outlet  
• Never unscrew except the appointed (marked by an arrow) screws.  
• Do not open the lamp cover while the projector is mounted on a wall  
or ceiling. This is dangerous, since if the lamp’s bulb has broken, the  
shards will fall out when the cover is opened. In addition, working in  
high places is dangerous, so ask your local dealer to have the lamp  
replaced even if the bulb is not broken.  
• Do not use the projector with the lamp cover removed. At the lamp  
replacing, make sure that the screws are screwed in firmly. Loose  
screws could result in damage or injury.  
• Use only the lamp of the specified type. Use of a lamp that does not  
meet the lamp specifications for this model could cause a fire, damage or  
shorten the life of this product.  
• If the lamp breaks soon after the first time it is used, it is possible  
that there are electrical problems elsewhere besides the lamp. If this  
happens, consult your local dealer or a service representative.  
Handle with care: jolting or scratching could cause the lamp bulb to burst during use.  
Using the lamp for long periods of time, could cause it dark, not to light up or to burst.  
When the pictures appear dark, or when the color tone is poor, please replace the  
lamp as soon as possible. Do not use old (used) lamps; this is a cause of breakage.  
97  
Maintenance  
Cleaning and replacing the air filter  
The air filter unit of this projector consists of a filter cover, two kinds of filters, and  
a filter frame. The new double large filters system is expected to function longer.  
However, please check and clean it periodically to keep ventilation needed for  
normal operation of the projector.  
When the indicators or a message prompts you to clean the air filter, comply with  
it as soon as possible. Replace the filters when they are damaged or too soiled.  
To prepare new filters, make contact with your dealer and tell the following type  
number.  
Type number : UX37191 (Filter set)  
When you replace the lamp, please replace the air filter. An air filter of specified  
type will come together with a replacement lamp for this projector.  
Turn the projector off, and unplug the power cord.  
Allow the projector to sufficiently cool down.  
3.  
1.  
2. Use a vacuum cleaner on and around the filter cover.  
Filter cover  
Slide the filter unit upward to take it off from the  
3.  
projector.  
Use a vacuum cleaner for the filter vent of the  
projector.  
4.  
Intake vent  
Take the fine meshed filter out while holding the  
filter cover. It is recommended to leave the coarse  
meshed filter in the filter cover as it is.  
Filter unit  
5.  
Filter cover  
7.  
Use a vacuum cleaner on both sides of the fine  
meshed filter while holding it so it will not be sucked  
in. Use a vacuum cleaner for the inside of the filter  
cover to clean up the coarse meshed filter. If the  
filters are damaged or heavily soiled, replace them  
with new ones.  
6.  
Filter  
(coarse meshed)  
Filter (fine meshed)  
Put the fine meshed filter on the coarse meshed  
one,turning its plastic band side up.  
Plastic  
band  
7.  
8. Put the filter unit back into the projector.  
(continued on next page)  
98  
Maintenance  
Cleaning and replacing the air filter (continued)  
Turn the projector on and reset the filter time using the FILTER TIME item in  
the EASY MENU.  
9.  
(1) Press the MENU button to display a menu.  
(2) Point at the FILTER TIME using the ▼/▲ button, then press the ► button.  
A dialog will appear.  
(3) Press the ► button to select “OK” on the dialog. It performs resetting the  
filter time.  
WARNING ►Before taking care of the air filter, make sure the power cable  
is not plugged in, then allow the projector to cool sufficiently. Taking care of the  
air filter in a high temperature state of the projector could cause an electric shock,  
a burn or malfunction to the projector.  
►Use only the air filter of the specified type. Do not use the projector without the  
air filter or the filter cover. It could result in a fire or malfunction to the projector.  
►Clean the air filter periodically. If the air filter becomes clogged by dust or the  
like, internal temperatures rise and could cause a fire, a burn or malfunction to  
the projector.  
NOTE • Please replace the air filter when it is damaged or heavily soiled.  
• When you replace the projection lamp, please replace the air filter. An air filter  
of specified type will come together with a replacement lamp for this projector.  
• Please reset the filter time only when you have cleaned or replaced the air  
filter, for a suitable indication about the air filter.  
• The projector may display the message such as “CHECK THE AIR FLOW” or  
turn off the projector, to prevent the internal heat level rising.  
99  
Maintenance  
Replacing the internal clock battery  
Installing the battery is required in some cases. (  
Event Scheduling in the User's  
Manual - Network Guide) A battery is not contained at the time of factory shipment.  
Please replace a battery according to the following procedure.  
Battery Cover  
Turn the projector off, and unplug the power cord. Allow the  
projector to cool sufficiently.  
1.  
After making sure that the projector has cooled adequately,  
slowly turn over the projector, so that the bottom is facing.  
2.  
Turn the battery cover fully in the direction indicated “OPEN”  
using a coin or the like, and pick the cover up to  
3.  
remove it.  
90°  
N  
CLOSE  
Pry up the battery using a flathead screwdriver or the like  
4.  
to take it out. While prying it up, put a finger lightly on the  
battery since it may pop out of the holder.  
OPEN  
CLOSE  
Replace the battery with a new HITACHI MAXELL,  
Part No.CR2032 or CR2032H.  
Slide the battery in under the plastic claw, and push it  
5.  
OPEN  
CLOSE  
into the holder until it clicks.  
Replace the battery cover in place, then turn it in the  
6.  
direction indicated “CLOSE” using such as coins, to fix.  
90°  
WARNING ►Always handle the batteries with care and use them only as  
directed. Battery may explode if mistreated. Do not recharge, disassemble or  
dispose of in fire.  
And also improper use may result in cracking or leakage, which could result in  
fire, injury and/or pollution of the surrounding environment.  
Be sure to use only the batteries specified.  
Make sure the plus and minus terminals are correctly aligned when loading a battery.  
Keep a battery away from children and pets. If swallowed consult a physician  
immediately for emergency treatment.  
Do not short circuit or solder a battery.  
Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry place.  
If you observe battery leakage, wipe out the leakage and then replace a battery. If the  
leakage adheres to your body or clothes, rinse well with water immediately.  
Obey the local laws on disposing a battery.  
NOTE • The internal battery is required to be replaced when the time is off  
soon after setting date and time.  
100  
Maintenance  
Other care  
Inside of the projector  
In order to ensure the safe use of your projector, please have it cleaned and  
inspected by your dealer about once every year.  
Caring for the lens  
• If the lens is flawed, soiled or fogged, it can cause deterioration in display quality.  
Handle the projector carefully to prevent the lens from being scratched or soiled.  
• If the lens is soiled or fogged, please take care of the lens by following steps  
below.  
Turn the projector off, and unplug the power cord. Allow the projector to cool  
sufficiently.  
1.  
After making sure that the projector is cool adequately, lightly wipe the lens  
with a commercially available lens-cleaning wipe. Do not touch the lens  
directly with your hand.  
2.  
Caring for the cabinet and remote control  
Incorrect care could have adverse influence such as discoloration, peeling paint,  
etc.  
Turn the projector off, and unplug the power cord. Allow the projector to cool  
sufficiently.  
1.  
After making sure that the projector is cool adequately, lightly wipe with gauze  
or a soft cloth.  
If the projector is extremely dirty, dip soft cloth in water or a neutral cleaner  
diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a  
soft, dry cloth.  
2.  
WARNING ►Before caring, make sure the power cord is not plugged in,  
and then allow the projector to cool sufficiently. The care in a high temperature  
state of the projector could cause a burn and/or malfunction to the projector.  
►Never try to care for the inside of the projector personally. Doing is so  
dangerous.  
►Avoid wetting the projector or inserting liquids in the projector. It could result in  
a fire, an electric shock, and/or malfunction to the projector.  
• Do not put anything containing water, cleaners or chemicals near the projector.  
• Do not use aerosols or sprays.  
CAUTION ►Please take right care of the projector according to the  
following. Incorrect care could cause not only an injury but adverse influence  
such as discoloration, peeling paint, etc.  
►Do not use cleaners or chemicals other than those specified in this manual.  
►Do not polish or wipe with hard objects.  
NOTICE ►Do not directly touch the projection window surface with hands.  
101  
Troubleshooting  
Troubleshooting  
If an abnormal operation should occur, stop using the projector immediately.  
WARNING  
Never use the projector if abnormal operations such as smoke,  
strange odor, excessive sound, damaged casing or elements or cables, penetration  
of liquids or foreign matter, etc. should occur. In such cases, immediately disconnect  
the power plug from the power outlet. After making sure that the smoke or odor has  
stopped, contact to your dealer or service company.  
Otherwise if a problem occurs with the projector, the following checks and measures are  
recommended before requesting repair.  
If this does not resolve the problem, please contact your dealer or service company. They  
will tell you what warranty condition is applied.  
Related messages  
When some message appears, check and cope with it according to the following table.  
Although these messages will be automatically disappeared around several minutes, it will  
be reappeared every time the power is turned on.  
Message  
Description  
There is no input signal.  
Please confirm the signal input connection, and the status  
of the signal source.  
Projector is waiting for an image file.  
Check the hardware connection, settings on the projector  
and network-related settings.  
The computer-Projector network connection might be  
disconnected. Please re-connect using “Connect button” of  
the “LiveViewer”.  
(continued on next page)  
102  
Troubleshooting  
Related messages (continued)  
Message  
Description  
The horizontal or vertical frequency of the input signal is  
not within the specified range.  
Please confirm the specs for your projector or the signal  
source specs.  
An improper signal is input.  
Please confirm the specs for your projector or the signal  
source specs.  
The internal temperature is rising.  
Please turn the power off, and allow the projector to cool  
down at least 20 minutes. After having confirmed the  
following items, please turn the power ON again.  
• Is there blockage of the air passage aperture?  
• Is the air filter dirty?  
• Does the peripheral temperature exceed 40°C?  
• Is the projector used at an altitude of about 1600 m or  
higher? If the projector is used at an altitude of about 1600  
m or higher, set ALTITUDE of the SERVICE item in the  
OPTION menu to HIGH ( 64). If the projector is used with  
a wrong setting, it may cause damage to the projector itself  
or the parts inside.  
A note of precaution when cleaning the air filter.  
Please immediately turn the power off, and clean or change  
the air filter referring to the “Cleaning and replacing the  
air filter” section of this manual. After you have cleaned or  
changed the air filter, please be sure to reset the filter time  
(
47, 98).  
The button operation is not available.  
103  
Troubleshooting  
Regarding the indicator lamps  
When operation of the LAMP, TEMP and POWER indicators differs from usual,  
check and cope with it according to the following table.  
POWER  
indicator indicator indicator  
LAMP  
TEMP  
Description  
Lighting  
In Orange  
Turned  
off  
Turned  
off  
The projector is in a standby state.  
Please refer to the section “Power on/off”.  
Blinking  
In Green  
Turned  
off  
Turned  
off  
The projector is warming up.  
Please wait.  
Lighting  
In Green  
Turned  
off  
Turned  
off  
The projector is in an on state.  
Ordinary operations may be performed.  
Blinking  
In Orange  
Turned  
off  
Turned  
off  
The projector is cooling down.  
Please wait.  
The projector is cooling down. A certain error  
has been detected.  
Please wait until POWER indicator finishes blinking,  
and then perform the proper measure using the item  
descriptions below.  
Blinking  
In Red  
(discre- (discre-  
tionary) tionary)  
The lamp does not light, and there is a possibility  
that interior portion has become heated.  
Please turn the power off, and allow the projector to  
cool down at least 20 minutes. After the projector has  
sufficiently cooled down, please make confirmation of  
Blinking  
In Red  
or  
Lighting  
In Red  
Lighting Turned the following items, and then turn the power on again.  
In Red  
off  
• Is there blockage of the air passage aperture?  
• Is the air filter dirty?  
• Does the peripheral temperature exceed 40°C?  
If the same indication is displayed after the remedy,  
please change the lamp referring to the section  
“Replacing the lamp”.  
The lamp cover has not been properly fixed.  
Please turn the power off, and allow the projector to  
cool down at least 45 minutes. After the projector has  
Blinking  
In Red  
or  
Lighting  
In Red  
Blinking Turned sufficiently cooled down, please make confirmation of  
In Red  
off  
the attachment state of the lamp cover. After performing  
any needed maintenance, turn the power on again.  
If the same indication is displayed after the remedy,  
please contact your dealer or service company.  
The cooling fan is not operating.  
Please turn the power off, and allow the projector to  
cool down at least 20 minutes. After the projector has  
Turned Blinking sufficiently cooled down, please make confirmation  
Blinking  
In Red  
or  
Lighting  
In Red  
off  
In Red that no foreign matter has become caught in the fan,  
etc., and then turn the power on again.  
If the same indication is displayed after the remedy,  
please contact your dealer or service company.  
(continued on next page)  
104  
Troubleshooting  
Regarding the indicator lamps (continued)  
POWER  
indicator indicator indicator  
LAMP  
TEMP  
Description  
There is a possibility that the interior portion  
has become heated.  
Please turn the power off, and allow the projector to cool down at least  
20 minutes. After the projector has sufficiently cooled down, please make  
confirmation of the following items, and then turn the power on again.  
• Is there blockage of the air passage aperture?  
• Is the air filter dirty?  
• Does the peripheral temperature exceed 40°C?  
• Is the projector used at an altitude of about 1600 m or  
higher? If the projector is used at an altitude of about  
1600 m or higher, set ALTITUDE of the SERVICE item  
Blinking  
In Red  
or  
Lighting  
Turned Lighting  
off  
In Red  
In Red  
in the OPTION menu to HIGH  
.
64)  
(
It is time to clean the air filter.  
Please immediately turn the power off, and clean or  
change the air filter referring to the section “Cleaning  
and replacing the air filter”. After cleaning or changing  
the air filter, please be sure to reset the filter time.  
After the remedy, reset the power to ON.  
Lighting  
In Green  
Simultaneous  
blinking in Red  
There is a possibility that the interior portion  
has become overcooled.  
Please use the unit within the usage temperature  
parameters (0°C to 40°C).  
Lighting  
In Green  
Alternative  
blinking in Red  
After the treatment, reset the power to ON.  
Blinking In  
At least 1 "Power ON" schedule is saved to the  
Green for Turned  
Turned projector.  
approx. 3  
seconds.  
off  
off  
Please refer to Schedule Settings section of User’s  
Manual - Network Guide.  
(continued on next page)  
105  
Troubleshooting  
Regarding the indicator lamps (continued)  
POWER  
indicator indicator indicator  
Lighting  
Lighting Lighting Loading the saved data of CLONING on STANDBY  
In Orange In Red  
In Red MODE.  
LAMP  
TEMP  
Description  
Loading the saved data of CLONING has failed on  
STANDBY MODE.  
Please refer to CLONING ( 68 ~ 71).  
Blinking  
In Orange In Red  
Blinking Blinking  
In Red  
Turned  
off  
Turned  
off  
Turned Loading the saved data of CLONING has  
off succeeded on STANDBY MODE.  
NOTE • When the interior portion has become overheated, for safety purposes,  
the projector is automatically shut down, and the indicator lamps may also be  
turned off. In such a case, disconnect the power cord, and wait at least 45 minutes.  
After the projector has sufficiently cooled down, please make confirmation of the  
attachment state of the lamp and lamp cover, and then turn the power on again.  
106  
Troubleshooting  
Resetting all settings  
When it is hard to correct some wrong settings, the FACTORY RESET function  
of SERVICE item in OPTION menu (71) can reset all settings (except settings  
such as LANGUAGE, LAMP TIME, FILTER TIME, FILTER MESSAGE, STANDBY  
MODE,SCHEDULE,AUTO BLANK,SECURITY and NETWORK) to the factory  
default. Be sure to set ALTITUDE after resetting all the settings(64).  
Phenomena that may be easy to be mistaken for machine defects  
About the phenomenon confused with a machine defect, check and cope with it  
according to the following table.  
Reference  
page  
Phenomenon  
Cases not involving a machine defect  
The electrical power cord is not plugged in.  
Correctly connect the power cord.  
14  
The main power source has been interrupted during  
operation such as by a power outage (blackout), etc.  
Please disconnect the power plug from the power outlet,  
and allow the projector to cool down at least 10 minutes,  
then turn the power on again.  
14, 20  
Power does not  
come on.  
Either there is no lamp and/or lamp cover, or either  
of these has not been properly fixed.  
Please turn the power off and disconnect the power  
plug from the power outlet, and allow the projector to  
cool down at least 45 minutes. After the projector has  
sufficiently cooled down, please make confirmation of  
the attachment state of the lamp and lamp cover, and  
then turn the power on again.  
96  
The signal cables are not correctly connected.  
Correctly connect the connection cables.  
10~ 15  
Signal source does not correctly work.  
Correctly set up the signal source device by referring to  
the manual of the source device.  
Neither sounds  
nor pictures are  
outputted.  
The input changeover settings are mismatched.  
Select the input signal, and correct the settings.  
23  
The BLANK function for pictures and the MUTE  
function for sounds are working.  
AV MUTE may be active.  
22  
Refer to the item “Sound does not come out” and “No  
pictures are displayed” on the next page to turn off the  
MUTE and BLANK functions.  
(continued on next page)  
107  
Troubleshooting  
Phenomena that may be easy to be mistaken for machine defects (continued)  
Reference  
page  
Phenomenon  
Cases not involving a machine defect  
The signal cables are not correctly connected.  
Correctly connect the audio cables.  
10 ~ 15  
The MUTE function is working.  
22  
Restore the sound pressing VOLUME +/- button on the  
remote control.  
The volume is adjusted to an extremely low level.  
Adjust the volume to a higher level using the menu function  
or the remote control.  
22, 50,  
51  
Sound does not  
come out.  
The AUDIO SOURCE/SPEAKER setting is not correct.  
Correctly set the AUDIO SOURCE/SPEAKER in AUDIO menu.  
50  
The Sound button (♪) or checkbox is disabled.  
If you have selected USB TYPE A, turn the sound on from  
the Thumbnail menu.  
If you have selected USB TYPE B, put a check mark on the  
Sound checkbox in the Options window of “LiveViewer Lite  
for USB”.  
82, 91,  
95  
If you have selected LAN, put a check mark on the Sound  
checkbox in the Option menu of “LiveViewer”.  
(continued on next page)  
108  
Troubleshooting  
Phenomena that may be easy to be mistaken for machine defects (continued)  
Reference  
page  
Phenomenon  
Cases not involving a machine defect  
The signal cables are not correctly connected.  
Correctly connect the connection cables.  
10 ~ 15  
The brightness is adjusted to an extremely low level.  
Adjust BRIGHTNESS to a higher level using the menu function.  
34  
11  
22  
The computer cannot detect the projector as a plug-  
and-play monitor.  
Make sure that the computer can detect a plug-and-play  
monitor using another plug-and-play monitor.  
The BLANK screen is displayed.  
Press AV MUTE button on the remote control.  
No pictures are  
displayed.  
The projector does not recognize the USB storage  
device inserted into USB TYPE A port.  
Before removing the USB storage device, be sure to use  
the REMOVE USB function on the thumbnail screen, which  
appears when the USB TYPE A port is selected as the input  
source.  
14  
11  
"Waiting for connection." remains displayed even  
though the USB TYPE B port is selected.  
Remove the USB cable and reconnect after a while.  
The projector is not receiving a signal from the remote  
control. (frequency)  
See "REMOTE FREQ." under the SERVICE item in the  
OPTION menu and Changing the frequency of remote  
control signal. Set either of the following settings.  
1. Set 1. NORMAL to ON and 2. HIGH to OFF. On the  
remote control, set the signal frequency mode to NORMAL.  
2. Set 2. HIGH to ON and 1. NORMAL to OFF. On the  
remote control, set the signal frequency mode to HIGH.  
The remote  
control is not  
operating.  
18,66  
(continued on next page)  
109  
Troubleshooting  
Phenomena that may be easy to be mistaken for machine defects (continued)  
Reference  
page  
Phenomenon  
Cases not involving a machine defect  
The FREEZE function is working.  
Video screen  
display freezes.  
29  
Press FREEZE button to restore the screen to normal.  
Color settings are not correctly adjusted.  
Perform picture adjustments by changing the COLOR TEMP, COLOR,  
TINT and/or COLOR SPACE settings, using the menu functions.  
Colors have a  
faded- out  
appearance, or  
Color tone is  
poor.  
35, 40  
COLOR SPACE setting is not suitable.  
Change the COLOR SPACE setting to AUTO, RGB,  
SMPTE240, REC709 or REC601.  
40  
The brightness and/or contrast are adjusted to an  
extremely low level.  
Adjust BRIGHTNESS and/or CONTRAST settings to a  
higher level using the menu function.  
34  
The projector is operating in Eco mode.  
Set ECO MODE to OFF, and set AUTO ECO MODE to OFF,  
in the SETUP menu.  
46  
Pictures appear  
dark.  
The lamp is approaching the end of its product lifetime.  
Replace the lamp.  
96, 97  
When the internal temperature is high (even if the  
ambient temperature is lower than 35°C), the brightness  
of lamp might be reduced automatically.  
98  
25, 39  
46  
Please clean or replace the air filter.  
Either the focus and/or horizontal phase settings are  
not properly adjusted.  
Adjust the focus using the FOCUS ring, and/or H PHASE  
Pictures appear  
blurry.  
using the menu function.  
When the projector is operating in Eco mode, flickering  
may appear on screen.  
Set ECO MODE to OFF, and set AUTO ECO MODE to OFF,  
in the SETUP menu.  
Some kind  
of image  
degradation  
such as  
The OVER SCAN ratio is too big.  
Adjust OVER SCAN in the IMAGE menu smaller.  
37  
40  
flickering or  
stripes appear  
on screen.  
Excessive VIDEO NR.  
Change the setting of VIDEO NR in the INPUT menu.  
The FRAME LOCK function cannot work on the current  
input signal.  
42  
Set FRAME LOCK in the INPUT menu to OFF.  
(continued on next page)  
110  
Troubleshooting  
Phenomena that may be easy to be mistaken for machine defects (continued)  
Reference  
page  
Phenomenon  
Cases not involving a machine defect  
The sound  
or image  
is unstable  
or is output  
intermittently.  
When LAN, USB TYPE A or USB TYPE B port is  
selected, some ports of the output may be missing  
due to signal processing delay.  
23, 50  
Change the signal or use another port.  
The computer  
The computer cannot start up in the current hardware  
connected to the configuration.  
USB TYPE B port  
of the projector  
11  
Disconnect the USB cable from the computer, then  
reconnect it after starting up the computer.  
does not start up.  
The SAVING function is working.  
Select NORMAL for STANDBY MODE item in the SETUP menu.  
49  
67  
49  
RS-232C does  
not work.  
The COMMUNICATION TYPE for the CONTROL port is  
set to NETWORK BRIDGE.  
Select OFF for COMMUNICATION TYPE item in the  
OPTION - SERVICE - COMMUNICATION menu.  
The SAVING function is working.  
Select NORMAL for STANDBY MODE item in the SETUP menu.  
Network does  
not work.  
The same network address is set for both wireless and wired  
LAN.  
Change the network address setting for wireless or wired  
LAN.  
NETWORK  
BRIDGE  
function does  
not work.  
The NETWORK BRIDGE function is turned off.  
Select NETWORK BRIDGE for COMMUNICATION TYPE  
item in the OPTION - SERVICE - COMMUNICATION menu.  
67  
49  
The SAVING function is working.  
Select NORMAL for STANDBY MODE item in the SETUP menu.  
The internal clock has been reset.  
Schedule function  
does not work.  
When you do not install the battery, once you turn off the  
projector in the SAVING mode or the AC power, the current  
date and time setting is reset. Check the DATE AND TIME  
setting for WIRELESS SETUP or WIRED SETUP in the  
NETWORK menu or install the batteries.  
(continued on next page)  
111  
Troubleshooting  
Phenomena that may be easy to be mistaken for machine defects (continued)  
Reference  
page  
Phenomenon  
Cases not involving a machine defect  
When the  
projector is  
connected to  
wired LAN, it  
powers off and  
on as described  
below.  
Disconnect the LAN cable and check that the projector  
is working properly.  
If this phenomenon occurs after connecting to the network,  
there may be a loop between two Ethernet switching hubs  
within the network, as explained below.  
-
There are two or more Ethernet switching hubs in a network.  
- Two of the hubs are doubly connected by LAN cables.  
This double connection forms a loop between the two hubs.  
Powers off  
-
Such a loop may have an adverse effect on the projector  
as well as the other network devices.  
Check the network connection and remove the loop by  
disconnecting the LAN cables such that there is only one  
connecting cable between two hubs.  
POWER indicator  
blinks in orange a  
few times  
Goes into  
standby mode  
USB memory is out of memory.  
Please delete unnecessary files to free up memory.  
At least 1MB of memory is needed.  
USB memory is write-protected.  
Unable to save  
the CLONING  
.
data  
Unlock the USB memory.  
Unable to find the saved data from USB memory.  
Execute SAVE then LOAD by going through the procedure.  
File name of USB memory doesn't match.  
68 ~ 71  
Please assign "pj_data.bin" for setting data, and for  
MyScreen "pj_logo.bmp" or "pj_logo.gif".  
STANDBY mode is set to SAVING.  
Unable to load  
the CLONING  
.
saved data  
Switch the SAVING to NORMAL in STANDBY MODE  
under SETUP menu beforehand to load the CLONING  
data using control panel on the projector while the lamp  
is in standby state.  
NOTE • Although bright spots or dark spots may appear on the screen, this  
is a unique characteristic of liquid crystal displays, and it does not constitute or  
imply a machine defect.  
112  
Specifications  
Specifications  
Please see the Specifications in the User’s Manual (concise) which is a book.  
End User License Agreement for the Projector Software  
• Software in the projector consists of the plural number of independent software  
modules and there exist our copyright or/and third party copyrights for each of  
such software modules.  
• Be sure to read “End User License Agreement for the Projector Software” which  
is separated document. (in the CD)  
Trademark acknowledgment  
• Mac® is a registered trademark of Apple Inc.  
• Windows®, DirectDraw® and Direct3D® are registered trademarks of Microsoft Corporation  
in the U.S. and/or other countries.  
• VESA and DDC are trademarks of the Video Electronics Standard Association.  
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered  
trademarks of HDMI Licensing LLC in the United States and other countries.  
• Trademark PJLink is a trademark applied for trademark rights  
in Japan, the United States of America and other countries and  
areas.  
• Blu-ray DiscTM and Blu-rayTM are trademarks of Blu-ray Disc Association.  
All other trademarks are the properties of their respective owners.  
113  

Sharp Ar M700u User Manual
Ricoh Aficio Ld270 User Manual 3
Ricoh Aficio Ld260 User Manual
Panasonic Kx Tg5651 User Manual
Netgear Printer Ps101 User Manual
NEC NP PH1000U User Manual
MAKITA UB1100 User Manual
HP ELITEDESK 800 G4 User Manual
CRAFTSMAN 113.206891 User Manual
ACER CWX1139 L320 User Manual