HITACHI 42PD6000TA User Manual
HITACHI MODEL 42PD6000TA  
USER'S MANUAL  
Thank you very much for purchasing the HITACHI PDP TV.  
Before using your TV, please carefully read the "SAFETY  
INSTRUCTIONS" and this "USER'S MANUAL" so you will  
know how to operate the PDP TV properly. Keep this  
manual in a safe place. You will find it useful in the future.  
Notes on Installation Work:  
This product is marketed assuming that it is installed by  
qualified personnel with enough skill and competence.  
Always have an installation specialist or your dealer install  
and set up the product. HITACHI cannot assume liabilities  
for damage caused by mistake in installation or mounting,  
misuse, modification or a natural disaster.  
Note for Dealers:  
After installation, be sure to deliver this manual to the  
customer and explain to the customer how to handle the  
product.  
1
HITACHI MODEL 42PD6000TA  
FEATURES  
Large-screen, high-definition plasma display panel  
The 42-inch color plasma display panel, with a resolution of 1024 (H) x 1024(V) pixels, creates a high-definition,  
large-screen (aspect ratio : 16:9) and low-profile flat display. Free from electromagnetic interferences from geomagnetic  
sources and ambient power lines, the panel produces high-quality display images free from color misconvergence and  
display distortion.  
High Performance Digital Processor  
A
wide range of input signals can be handled, including composite, component, and HDMI.  
High Definition Digital Processor creates the fine-textured image with dynamic contrast.  
In addition, it corresponds to a broad array of personal computer signals, from 640 x 400 and 640 x 480 VGA to 1280 x  
1024 XGA.(PC RGB Input)  
Easy-to-use remote control and on screen display system  
The remote control included eases the work of setting display controls. Further, the on-screen display system, displays the  
status of signal reception and display control settings in an easy-to-view fashion.  
Power saving system  
The power saver feature saves power consumption automatically when input signals are not available. When connected to a  
VESA DPMS-compliant PC, the PDP TV cuts its power consumption while it is idle.  
Connecting to an Audio Visual Device  
•
One S-Video terminal, one composite terminal, one component terminals, a HDMI terminal and a PC RGB input terminal  
have been added.  
•
•
A video output terminal is also provided as a monitoring output.  
A wide range of devices can also be connected besides personal computers.  
Options  
TV stand or wall mount  
3
HITACHI MODEL 42PD6000TA  
CONTENTS  
IMPORTANT SAFETY INSTRUCTIONS …………2  
FEATURES .....................................................3  
SAFETY INSTRUCTIONS ...............................5  
OTHER FUNCTIONS .....................................34  
Audio Switching ...................................................................34  
Signal Check .....................................................................35  
Power Save Mode.................................................................36  
TROUBLESHOOTING ....................................37  
Symptoms That Seemingly Appear to be Failures .............37  
Actions to Correct Abnormal Displays .................................39  
PRODUCT SPECIFICATIONS ........................40  
Recommended Signal List ...................................................41  
IMAGE RETENTION OF PLASMA DISPLAY ..9  
COMPONENT NAMES.....................................10  
Main Unit ...............................................................................10  
Remote control ....................................................................11  
Loading Batteries ..............................................................11  
Handling the Remote Control............................................11  
Function Buttons.........................................................12  
INSTALLATION INSTRUCTIONS ................17  
Installation.............................................................................17  
Connecting to an Audio Visual Device..............................18  
Connecting to a PC..............................................................22  
Power Cord Connection .......................................................23  
OPERATING INSTRUCTIONS.......................24  
T
urning Power On and Off ..................................................24  
Input Switching ....................................................................25  
olume Adjustment .............................................................25  
V
Audio Mute ..........................................................................25  
Input Signal Screen Display ................................................26  
Using the Menu Screen (On-screen display system) ........27  
Video Menu...........................................................................28  
Image Menu.........................................................................29  
Audio Menu ..........................................................................30  
Language Menu ...................................................................30  
System Menu .......................................................................31  
Notes about This Manual  
• The information in this manual is subject to change without notice.  
• While meticulous care has been taken in the preparation of this manual, you are requested to notify your dealer or us  
should you have any comments, views or questions about our product.  
• Fully understand the prerequisites to using the product, such as hardware and software specifications and  
constraints, in using the product. We are not held liable for damages caused by improper handling of the product.  
• Reproduction of this manual in whole or in part without our prior written permission is prohibited.  
• The product names mentioned in this manual may be trademarks or registered trademarks of their respective  
owners.  
4
HITACHI MODEL 42PD6000TA  
SAFETY INSTRUCTIONS  
This PDP TV has been designed and manufactured to meet international safety standards, but like any electrical  
equipment, care must be taken if you are to obtain the best results and safety is to be assured.  
Before using this product, please read and understand the Safety Instructions thoroughly to ensure correct usage, and  
follow all the instructions.  
About the Symbols  
Various symbols are used in this manual, the user’s manual and on the product itself to ensure correct usage, to prevent  
danger to the user and others, and to prevent property damage. The meanings of these symbols are described below. It is  
important that you read these descriptions thoroughly and fully understand the contents.  
This symbol indicates information that, if ignored, could possibly result in personal injury or even  
death due to incorrect handling.  
This symbol indicates information that, if ignored, could result possibly in personal injury or  
physical damage due to incorrect handling.  
Typical Symbols  
This symbol indicates an additional warning (including cautions). An illustration is provided to clarify the contents.  
This symbol indicates a prohibited action. The contents will be clearly indicated in an illustration or nearby (the  
symbol to the left indicates that disassembly is prohibited).  
This symbol indicates a compulsory action. The contents will be clearly indicated in an illustration or nearby (the  
symbol to the left indicates that the power plug should be disconnected from the power outlet)  
WARNING  
Never use the PDP TV if a problem should occur.  
Abnormal operations such as smoke, strange odor, no image, no sound, excessive sound, damaged casing, elements,  
cables, penetration of liquids or foreign matter, etc. can cause a fire or electrical shock.  
In such case, immediately turn off the power switch and then disconnect the power plug from the power outlet. After making  
sure that the smoke or odor has stopped, contact your dealer. Never attempt to make repairs yourself because this could be  
dangerous.  
Disconnect  
the plug  
from the  
power outlet.  
Do not insert liquids or foreign objects.  
Penetration of liquids or foreign objects could result in fire or electrical shock. Use special caution in households where  
children are present.  
If liquids or foreign objects should enter the television, immediately turn off the power switch, disconnect the power plug from  
the power outlet and contact your dealer.  
• Do not place the television in a bathroom.  
• Do not expose the television to rain or moisture.  
• Do not place flower vases, pots, cups, cosmetics, liquids such as water, etc on or around the television.  
• Do not place metals, combustibles, etc on or around the television.  
Never disassemble or modify the PDP TV.  
The television contains high voltage components. Modification could result in fire or electrical shock.  
• Never remove any fixed cover.  
Do not  
disassemble.  
Do not give the PDP TV any shock or impact.  
If the television should be shocked and/or broken, it could result in an injury, and continued use could result in fire or  
electrical shock. If the glass panel is broken or damaged, immediately turn off the power switch, disconnect the power plug  
from the power outlet and contact your dealer.  
Do not place the PDP TV on an unstable surface.  
If the television should be dropped and/or broken, it could result in an injury, and continued use could result in fire or  
electrical shock.  
• Do not place the television on an unstable, slant or vibrant surface such as a wobbly or inclined stand.  
Do not obstruct the ventilation of the PDP TV.  
If the ventilation is obstructed during the operation of the television or just after switching off the power, it could result in  
damage and shorten the lifespan of your television due to overheating. Make sure there is ample ventilation.  
• Keep a space of 100mm (10cm) or more between the sides, rear and top of the television and other objects such as walls.  
• Do not place anything around ventilation openings of the television.  
• Never block ventilation openings.  
• Do not put the LCD panel side up.  
• Do not cover the television with a tablecloth, etc.  
• Do not place the television on a carpet or bedding, or near a curtain.  
Use only the correct power outlet.  
Incorrect power supply could result in fire or electrical shock. Use only the correct power outlet depending on the indication  
on the television and the safety standard.  
• The enclosed power cord must be used depending on the power outlet to be used.  
5
HITACHI MODEL 42PD6000TA  
SAFETY INSTRUCTIONS (continued)  
About the Symbols (continued)  
WARNING  
Be cautious of the power cord connection.  
Incorrect connection of the power cord could result in fire or electrical shock.  
• Do not touch the power cord with a wet hand.  
• Check that the connecting portion of the power cord is clean (with no dust), before using. Use a soft and dry  
cloth to clean the power plug.  
• Insert the power plug into a power outlet firmly. Avoid using a loose, unsound outlet or contact failure.  
• Do not cut off the fitted power plug, the removal of which could lead to impaired performance. If you wish to  
extend the lead, obtain an appropriate extension lead or consult your dealer.  
• Should you require replacing the fuse in the molded plug with a new fuse, then please replace with new one of  
the same value, type and approval as the original. Ensure the fuse cover is returned to its original position.  
Be sure to keep safety ground connection.  
Connect the ground terminal of AC inlet of this television with the ground terminal provided at the power outlet  
using the enclosed power cord. If the provided plug does not fit your outlet, consult an electrician for  
replacement of the obsolete outlet.  
Surely connect  
the ground wire.  
Be careful in handling the power cord and external connection cables.  
If you keep using a damaged the power cord or cables, it can cause a fire or electrical shock. Do not apply too  
much heat, pressure or tension to the power cord and cables.  
If the power cord or cables are damaged (exposed or broken core wires, etc.), contact your dealer.  
• Do not place the television or heavy objects on the power cord and cables. Also, do not place a spread, cover,  
etc, over them because this could result in the inadvertent placing of heavy objects on the concealed power  
cord or cables.  
• Do not pull the power cord and cables. When connecting and disconnecting the power cord or cables, do it  
with your hand holding the plug or connector.  
• Do not place the cord near the heater.  
• Do not touch the power plug just after disconnecting it from the power outlet to prevent electric shock.  
• Do not touch the power plug when lightening is close to you.  
• Avoid coiling the power cord and bending it sharply.  
• Protect the power cord from being walked on, pinched particularly at plugs, conveniences receptacles, and the  
point where they exit from the apparatus.  
• Do not modify the power cord.  
Be careful in handling the battery of the remote control.  
Incorrect handling of the battery could result in fire or personal injury. The battery may explode if not handled  
properly.  
• Keep the battery away from children and pets. If swallowed consult a physician immediately for emergency  
treatment.  
• Do not allow the battery to be exposed to fire or water.  
• Avoid fire or high-temperature environment.  
• Do not hold the battery with metallic tweezers.  
• Keep the battery in a dark, cool and dry place.  
• Do not short circuit the battery.  
• Do not recharge, disassemble or solder the battery.  
• Do not physically impact the battery.  
• Use only the battery specified in the manual of this television.  
• Make sure the plus and minus terminals are correctly aligned when loading the battery.  
• If you observe a leakage of the battery, wipe out the liquid and then replace the battery. If the liquid adheres  
your body or clothes, rinse well with water.  
• Obey the local laws on disposing the battery.  
6
HITACHI MODEL 42PD6000TA  
SAFETY INSTRUCTIONS (continued)  
About the Symbols (continued)  
CAUTION  
Be careful in moving the PDP TV  
Neglect could result in an injury or damage.  
• Do not move the television during use. Before moving, disconnect the power plug and all external connections.  
• You are advised to move the television with two persons.  
• Avoid any impact or shock to the television; particularly take care of glass screen.  
Do not put anything on top of the PDP TV.  
Placing anything on the television could result in loss of balance or falling, and cause an injury or damage. Use special  
caution in households where children are present.  
Avoid a humid or dusty place.  
Placing the television in a smoke, a highly humid, dusty place, oily soot or corrosive gas could result in fire or electrical  
shock.  
• Do not place near the kitchen, a humidifier or other place where there is oil, smoke or humidity.  
Avoid a high temperature environment.  
The heat could have adverse influence on the television and other parts, and could result in transformation, melting or  
fire.  
• Do not place the television, the remote control and other parts in direct sunlight or near a hot object such as heater, etc.  
• Do not put the television in a place where the temperature is widely changing.  
Remove the power cord for complete separation.  
• For safety purposes, disconnect the power cord if the television is not to be used for prolonged periods of time.  
• Before cleaning, turn off and unplug the television. Neglect could result in fire or electrical shock.  
Disconnect the  
plug from the  
power outlet.  
PRECAUTIONS  
Installation environment  
Do not obstruct a ventilation hole.  
Do not put the television on carpet or blanket, or near a curtain which has a possibility of obstructing a ventilation hole of the  
television. Do not put the television in the following places.  
• Hot places such as near heater, place exposed to the direct rays of the sun.  
• A place where the temperature is widely changing.  
• Places with soot, dust or high humidity.  
• Poor air ventilation place.  
• Place near fire.  
• A wet place such as bathroom, or shower room.  
• Place where you can trip over it.  
• Always vibrating or strongly vibrating places.  
• Distorted or unstable places.  
How to view the PDP TV  
If you use the television in too dark a room, your eyes may become tired. Please use it in a reasonably bright room.  
Avoid direct rays of the sun to the screen in order to prevent eye fatigue. Your eyes will get fatigued after viewing the television for  
long period of time. Relax your eyes by viewing away from the television from time to time.  
Please watch the television in downward direction.  
Note on image retention  
The plasma PDP TV illuminates phosphor to display images. The phosphor has a finite illumination life. After extended periods of  
illumination, the brightness of the phosphor will be degraded to such extent that stationary images would burn-in that part of the  
screen as grayed-out images.  
Tips to prevent such image retention are:  
• Do not display images having sharp brightness differences or high-contrast images, such as monochrome characters and  
graphic patterns, for long.  
• Do not leave stationary images appearing for long, but try to refresh them at appropriate intervals of time, or try to move them  
using screen saver function.  
• Turn down the contrast and brightness controls.  
How to clean the plasma screen panel of the PDP TV  
Before cleaning the television, turn off the television and disconnect the power plug from the power outlet.  
To prevent scratching or damaging the LCD screen face, do not knock or rub the surface with sharp or hard objects. Clean the  
screen with a soft cloth moistened with warm water and dry with a soft cloth. If it is not enough, then use a cloth with mild detergent.  
Do not use harsh or abrasive cleaners.  
How to clean the cabinet of the PDP TV  
Use a soft cloth to clean the cabinet and control panel of the television. When excessively soiled dilute a neutral detergent in water,  
wet and wring out the soft cloth and afterward wipe with a dry soft cloth.  
Never use acid/alkaline detergent, alcoholic detergent, abrasive cleaner, powder soap, OA cleaner, car wax, glass cleaner, etc.  
especially because they would cause discoloration, scratches or cracks.  
7
HITACHI MODEL 42PD6000TA  
SAFETY INSTRUCTIONS (continued)  
About the Symbols (continued)  
Prevention of an obstacle to Radio receivers  
This television has been designed pursuant to the international EMI standards. This is to prevent a problem to Radio  
receivers.  
• Keep the television away from Radio.  
• Adjust Radio antennas in order for the television not to receive interference.  
• The antenna cable of Radio should be kept away from the television.  
• Use a coaxial cable for antenna.  
You can check if this television influences Radio receivers by turning off all other equipment other than the television. If you  
find a problem receiving Radio when using the television, check the instructions mentioned above.  
Precautions for the cable connection  
• Do ensure that all connections, (including the power plug, extension leads and interconnections between the pieces of  
equipment), are properly made and in accordance with the manufacturers instructions. Switch off and withdraw the  
power plug before making or changing connections.  
• Confirm the connector is fixed tightly when the signal cable is connected. Also confirm the screws on the connector are  
tightened.  
• Plug the power cord of the television into a different socket from that for other equipment, such as Radio etc.  
• Use a plug with ground terminal and make sure that it connects to the ground.  
Precaution during transportation  
Please pay attention when you transport this television because it is heavy.  
Furthermore, use the original carton box and its packaging materials when the television is transported. Failure to transport  
the television in any carton except the original carton may result in damage to the television. Save the original carton box  
and all packing material.  
Do not physically impact the remote control.  
A physical impact could cause damage or malfunction of the remote control.  
• Take care not to drop the remote control.  
• Do not place heavy objects on the remote control.  
Avoid strong rays.  
Any strong rays (such as direct sun rays or room lighting) onto the remote control sensors could invalidate the remote  
control.  
Avoid radio interference.  
Any interfering radiation could cause distorted images or noises.  
• Avoid radio generator such as a mobile telephone, transceiver, etc. around the television.  
Set the sound volume at a suitable level.  
It is better to keep the volume level low and close the windows at night to protect the neighborhood environment.  
Precautions for the installation  
• Do not use makeshift stands and NEVER fix legs with wood screws - to ensure complete safety, always fit the  
manufacturers approved stand or legs with the fixings provided according to the instructions.  
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a  
cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.  
• This product is designed to comply with the recommended safety standards for tilt and stability. Do not apply excessive  
pulling force to the front, or top, of the cabinet that could cause the product to overturn resulting in product damage  
and/or personal injury.  
• Follow instructions for wall, shelf or ceiling mounting as recommended by the manufacturer.  
• Only use the attachments/accessories specified by the manufacturer.  
• Consult your dealer if you are in any doubt about installation, operation or safety of your equipment.  
Other precautions  
• Do not leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended  
operation or has a stand-by mode. Switch off using the switch on the equipment and show your family how to do this.  
Make special arrangements for infirm or handicapped people.  
• Disposal of this product may require specific instructions pertaining to your resident region.  
• Never guess or take any chances with electrical equipment of any kind - it is better to be safe than sorry!  
8
HITACHI MODEL 42PD6000TA  
I
MAGE RETENTION OF PLASMA DISPLAY  
There are different characteristics that result in panel image retention depending on how the plasma display is  
used. Situations and effective usage methods related to ghosting are provided below.  
Image retention characteristics of a plasma display  
The image retention phenomenon of a plasma panel occurs due to partial phosphor degradation arising from partial character and  
figur display.  
e
For example, when the character image as shown in Fig. A at the  
right is continuously displayed for a long period of time, the only  
part of the phosphor (Red, Green, Blue) that will degrade will be  
the color of the applicable character display portion.  
Consequently, when a white image is displayed on the entir  
e
screen as shown in Fig. a, the character marks displayed up to  
that time will become a color difference visible to the eye, but the  
phosphor will never burn.  
［Fig. A］  
［Fig. a］  
■
The degree of image retention is proportional to the brightness of the characters and figures displayed as well as the display time.  
•
The tendency of the phosphor is to degrade more the  
brighter the characters and figures are displayed. When  
images of figures with different levels of brightness, as  
shown in Fig. B, are continuously displayed for a long  
period of time, it becomes easier for image marks at  
locations when the brighter figures are displayed to be  
noticeable.  
［Fig. B］  
［Fig. b］  
* The image retention images in this document are exaggerated for the purpose of explanation. The actual manner in which the image  
etention is seen differs depending on the operation time and brightness.  
r
Methods to Reduce the Occurrence of Image Retention  
• Lower the Contrast and Brightness settings of the plasma display as much as possible.  
A function is provided in the display that controls the brightness of the screen to reduce degradation of the panel. Using this function  
makes it possible to reduce image retention.  
• Set the PDP TV to a “Move Screen” display  
Move Screen function works to reduce image retention when displaying images on the four corners, such as TV station logos and  
clock display  
.
.
(Settings can be made using Move Screen from Function MENU shown on  
31 .)  
• Using in combination with moving images  
Since the degradation of the fluorescent material progresses comparatively uniform for moving images, the occurr  
image etention can be controlled. We recommend to use in combination with moving images such as a DVD.  
* Please be careful since image retention will occur if display is left in PIP display state for a long period of time  
elevision broadcasts include images displayed for long periods of time in which the left and right or top and bottom of the image  
ence of partial  
r
.
*
T
are cut and broadcast station name or time are displayed for a long period of time at the same portion of the screen. Image retention  
in these portions can be expected to occur, so please be aware.  
Notes  
About screen defects  
•
High precision technology is used in the making of plasma panels but there may be dark spots (points that do not illuminate) and  
bright spots (points that are too bright) in some cases. These do not indicate a malfunction.  
About residual images  
•
In some cases, residual images may remain after the short-term display of still images and another image is displayed, but  
these will disappear and return to normalcy. This is not a malfunction.  
About the panel screen  
•
Plasma displays display images by means of electrical discharges inside the panel. Because of this, the temperature of the panel  
surface may rise in some cases. Also, plasma displays are made of finely processed glass. A reinforced glass filter is installed over  
the panel surface but avoid strong impact because there is still danger of glass breakage.  
9
HITACHI MODEL 42PD6000TA  
COMPONENT NAMES  
Main Unit  
Front  
Control panel  
•
•
Adjustment buttons ar  
located on the bottom.  
The front bezel is provided  
with indications to distinguish  
the adjustment buttons.  
e
Indicating lamp 24  
Remote-control 11  
receiver  
Main power switch  
24  
① POWER  
② CHANNELS/UPS  
③ CHANNELT/DOWNT  
④ VOLUMEX/RIGHTX  
⑤ VOLUMEW/LEFTW  
⑥ INPUT/EXIT  
⑦ MENU/ENTER  
•
The main power switch is located at the back, on  
the right side.  
•
Normal button action/Button action when MENU engaged  
Rear  
Caution when moving the main unit  
•
As this product is heavy, whenever it is moved, two people  
are required to transport it safely.  
•
Whenever the unit is moved it should be lifted forwards  
using the two handgrips at the back, and the unit should  
then be held at the base on both sides for stability  
.
Main power switch  
24  
Power cord  
Power cord connector  
External device connection terminals  
* Input terminals from 18 to 22.  
10  
HITACHI MODEL 42PD6000TA  
COMPONENT NAMES (continued)  
Remote control  
Loading Batteries  
Handling the Remote Control  
Use the remote control within about 5 m from front of the unit’s  
remote control sensor and within 30 degrees on both sides.  
1. Open the battery cover of the remote control by pressing the  
notched part of the cover with your fingers and pulling the  
cover off.  
2. Insert two new “AAA” size batteries for the remote control.  
When replacing old batteries, push them towards the springs  
and lift them out.  
3. Match the batteries to the (+) and (-) marks in the battery  
compartment.  
4. Replace the cover.  
BOTTOM VIEW  
(Remote Control)  
Press and pull the back cover  
to remove  
ATTENTION  
• Do not drop or impact the remote control.  
• Do not splash the remote control with water or put it on a wet  
object to avoid possible failures.  
• Before leaving the remote control out of use for an extended  
period of time, remove the batteries from it.  
• If the remote control begins to lack responsiveness, replace  
the batteries.  
• Strong light such as direct sunlight impinging on the  
photoreceptor of the remote control can cause operational  
failure. Position this unit to avoid direct contact with such  
light.  
• Do not use new and old batteries together. The batteries  
could explode or leak, resulting in fires, physical injury, or  
stains.  
• When loading batteries, observe their correct polarities as  
marked on the product. If loaded in the wrong direction, the  
batteries could explode or leak, resulting in fires, physical  
injury, or stains.  
11  
HITACHI MODEL 42PD6000TA  
COMPONENT NAMES (continued)  
Remote control (continued)  
Function Buttons  
12  
HITACHI MODEL 42PD6000TA  
COMPONENT NAMES (continued)  
Remote control (continued)  
1. POWER button  
Press this button to turn the TV set on or standby.  
2. I/II button  
Press to select sound mode: Mono ▼, Stereo  
, Language A［I］, Language B［II］, Language A/B［I/II］.  
3.  
(MUTE) button  
Press to mute the volume. Press again to restore the volume.  
4. RECALL button  
Press to display source input signal on the display. When the PIP function is working, press to display audio source.  
Then press ▲ ▼ buttons to select between the sound of your main picture or PIP.  
5. PC button  
Press to switch directly to PC mode.  
6. TV/VIDEO button  
Shortcut to access the TV, Composite Video, S-Video, Y/CB/CR and Y/PB/PR mode. Press repeatedly to circle through  
the selections.  
7. HDMI button  
Press to switch directly to the HDMI mode.  
8. SLEEP button  
Press the sleep button repeatedly to set the sleep timer to 30, 60, 90, and 120 minutes  
9. --/--- button  
Press this button to choose specific number channel for two or three code upper channel. For example when select “--",  
you can only choose one or two code channel. When select “---", you can choose one, two or three code channel.  
10. NUMBER buttons  
Use Number buttons with --/--- button to choose specific channel.  
11. RTN (RETURN) button  
Press this button to toggle between the current and last channel viewed and press jump back to last page of OSD.  
12. EXIT button  
This button will exit all On-Screen Displays.  
13. MENU button  
The MENU button will start the OSD.  
14. ▲▼W X buttons  
Press Up/Down/Left/Right buttons to adjust the options under OSD menu.  
15. ENTER button  
Press ENTER button to select the functions under OSD menu.  
16. CHANNEL POSITION+/- buttons  
Press Channel +/ Channel - buttons to change channels under TV mode.  
17. VOLUME+/- buttons  
Press Vol+ / Vol- buttons to increase and decrease the volume.  
18. SORT button  
Press to access the TV channel list table.  
13  
HITACHI MODEL 42PD6000TA  
COMPONENT NAMES (continued)  
Remote control (continued)  
19. SORT EDIT button  
Press SORT EDIT button to enter function menu for editing, channel name, system, fine tune channel frequency, and  
delete the channel from list table.  
20. P. MODE button  
Press to select Natural, Cinema and Dynamic picture mode. Press repeatedly to circle through the selections.  
21. P. SIZE button  
Press repeatedly to change image to different size. Sizes include 4:3 Standard, Panoramic, 4:3 Zoom1, 4: 3 Zoom2,  
Full, 16:9 Zoom.  
4:3 Standard  
Use this side mode to display conventional (4:3) images. Side panels (gray areas) are placed to  
the left and right of the image to preserve the original aspect ratio of the source. Note: Use this  
mode for only 15% of your total viewing time to prevent uneven aging of the phosphors.  
Phosphors in the lighted area of the picture will age more rapidly than the gray areas.  
Use this side mode to display conventional (4:3) sources by linearly increasing image expansion  
from the center towards the edges of the display area in order to fill it.  
Panoramic  
4:3 Zoom1/Zoom2  
Full  
Use these side modes to zoom in on conventional (4:3) sources.  
Use this side mode to display 16:9 sources like HDTV and DVD’s preserving the original 16:9 side  
ratio.  
16:9 Zoom  
Use this side to Zoom-in once while in 16:9 side.  
Depending on the input signal format received, the picture format ratio allows you to adjust the images through the  
following options.  
(1) TV/480i/480p/576i/576p/HDMI Input  
Panoramic  
4:3 Standard  
16:9 Zoom  
4:3 Zoom1  
4:3 Zoom2  
Input  
Full  
(2) 720P/1080i/HDMI Input  
16:9 Zoom  
Panoramic  
Input  
Full  
(3) RGB Input  
Auto adjust to full size. (Aspect ratio is not changeable.)  
ATTENTION  
Using a wide picture size.  
• This TV has a picture size selection feature. If an incompatible size is selected to play certain software, such as a TV program, the  
image would appear different from original. Take this into consideration when making picture size choices.  
• Use of this TV in its enlarged display mode with the wide feature enabled in coffee shops and other establishments for commercial  
or public viewing purposes could infringe on the copyright holders right protected by Copyright Law.  
• When a normal 4:3 image is displayed over the entire picture in the Panoramic mode, parts of the periphery of the image may  
disappear and appear distorted in some cases. Use the 4:3 mode to view image, which were created in 4:3 mode.  
14  
HITACHI MODEL 42PD6000TA  
COMPONENT NAMES (continued)  
Remote control (continued)  
22. ZOOM +/- buttons  
Zoom in on the image by pressing Zoom + button and press Zoom – button to zoom out.  
23. PIP SWAP button  
Press to exchange the main video signal source with PIP video signal source.  
24. PIP INPUT button  
Activate PIP by pressing PIP Input button to select desired video input. To turn off PIP by keep pressing PIP Input  
button until the PIP window disappear. PIP source cannot be the same with main video source. (Component YCBCR  
/YPBPR, HDMI and PC RGB are not accessible to PIP)  
Main  
TV  
Composite S-Video  
Y/CB/CR  
Y/PB/PR  
HDMI  
PC RGB  
Sub  
TV  
○
○
○
○
○
○
○
○
○
×
○
○
○
×
×
○
○
○
×
×
×
Composite  
S-Video  
Y/CB/CR  
Y/PB/PR  
HDMI  
○
○
×
×
×
×
○
×
×
×
×
×
×
×
×
×
×
×
×
×
PC RGB  
×
NOTE  
For changing TV channel under PIP function, Press directly channel+/-, number and return buttons on remote control to change  
the channel.  
25. QUICK button  
Shortcut to access the Brightness, Contrast, Volume, Treble, Bass, and Balance adjustment. Press repeatedly to circle  
through the selections.  
15  
HITACHI MODEL 42PD6000TA  
COMPONENT NAMES (continued)  
Remote control (continued)  
Teletext Function Buttons  
A. TV/TEXT button  
Press to switches between the TV mode and the Teletext mode.  
B. BLUE button  
Press to operate the Teletext function in Teletext pattern. (Function depends on the Teletext pattern.)  
C. YELLOW button  
Press to operate the Teletext function in Teletext pattern. (Function depends on the Teletext pattern.)  
D. GREEN button  
Press to operate the Teletext function in Teletext pattern. (Function depends on the Teletext pattern.)  
E. RED button  
Press to operate the Teletext function in Teletext pattern. (Function depends on the Teletext pattern.)  
F. REVEAL button  
Press this allows hidden information (found on some Teletext pages) to be displayed on the screen.  
G. SUB PAGE button  
Use this to access a subtitle service directly rather than through a Teletext service (subject to subtitle service  
broadcasting).  
H. CANCEL button  
This allows the screen to return to the TV mode temporarily while searching for a required text page. When the required  
text page has been received, the page number will be displayed at the top left of the screen. Press the CANCEL button  
again to display the Teletext screen.  
I. INDEX button  
Press this button to select the index page that displays the list of Teletext contents.  
NOTE  
• Certain pages do not show linked pages at the bottom of the screen. To display linked pages, press the INDEX button.  
• Refer to Teletext Language shown on 32  
.
16  
HITACHI MODEL 42PD6000TA  
INSTALLATION INSTRUCTIONS  
Installation  
• If you have purchased the model without the stand attached:  
When installing the monitor, use the optional stand CMPAD42T.  
The desktop stand has been used for the installation in this manual.  
• Use one of the special mount units to install this product. A mount of insufficient strength or inadequate design can  
cause overturning or dropping and result in fire, electrical shock or injury. Please note that our company assumes  
absolutely no responsibility for personal injuries or property damage caused by use of other mount units or  
improper installation.  
• Have this unit mounted in a stable place. Take measures to prevent it from tumbling down to avoid possible.  
10cm (4 inches) or more*  
• In order to prevent an internal temperature increase, maintain a space of 10cm  
(4 inches: For a desktop set-up) or more between the sides and other objects such  
as walls, etc., so that the ventilation holes are not blocked.(*)  
PRECAUTIONS  
Please avoid installing the TV directly on the wooden floor. Depending on the quality and condition of the floor, the  
desktop stand may stick to the floor face, and the surface could come off when the TV is lifted up.  
Read SAFETY INSTRUCTIONS ( 5 to 8 ) carefully to ensure maximum safety before proceeding to  
these steps:  
•
Choose an appropriate site and install the product on a level table where the stand is secure.  
•
Install the PDP TV to have ready access to a power socket available.  
•
Make sure that the power switch of this device is turned off.  
17  
HITACHI MODEL 42PD6000TA  
INSTALLATION INSTRUCTIONS (continued)  
Connecting to an Audio Visual Device  
(1) Make sure that the signal of the audio visual device to be used is compatible with the specifications of this  
device. See “PRODUCT SPECIFICATIONS” concerning the specifications of this device. 40 ~ 42  
(2) Make sure that the power switch of the PDP TV is turned off.  
(3) Make sure that the power switch of the audio visual device is turned off.  
(4) Use a commercially available cable and connector to connect the signal input terminal on the rear panel of  
this device and the signal output terminal of the audio visual device.  
CONNECTING AN ANALOG TV CABLE OR AN ANALOG ANTENNA WITHOUT A TV CABLE BOX  
1. Use an antenna cable connects to an outdoor antenna.  
2. Connect all power sources before activating the PDP TV.  
3. Turn on the PDP TV.  
4. To use the TV, press TV/VIDEO button on the remote.  
5. When operating the TV at first time, its TV system is at “default  
factory mode” and this mode cannot display the image normally  
on the screen. In order to watch the TV program without problem,  
please execute “TV Channel Setup” menu 31 for normally display.  
Precautions when connecting the antenna  
‧
‧
Please use a coaxial cable which is free from interference to connect the antenna.  
Avoid using a parallel flat feeder wire as interference may occur, causing reception to be unstable and stripe noise to  
appear on the screen.  
‧
‧
‧
Avoid using indoor antenna as this may be affected by interference. Please use CATV net or outdoor antenna.  
Keep the power cord as far away from the antenna wire as possible.  
For safety, install an external antenna conforming to AS1417.1(applicable for Australia only)  
If there are noise appearance in the picture of VHF-Low band channel, please use the double-shielded cable (not provided) for RF  
LEADS to reduce the noise  
18  
HITACHI MODEL 42PD6000TA  
INSTALLATION INSTRUCTIONS (continued)  
Connecting to an Audio Visual Device (continued)  
CONNECTING HDTV SOURCES  
HDTV input sources, such as a digital cable box, digital satellite receiver, or digital terrestrial receiver box, can be  
connected as desired, using the appropriate cable system.  
1. Connect the HDTV source device using the appropriate cable pair, in the following order of preference:  
HDMI cable or Component cable and audio cable  
2. Connect all power sources before activating the PDP TV.  
3. Turn on the PDP TV.  
4. Press the button corresponding to the appropriate signal source (HDMI, or Component Video-YCBCR/YPBPR)  
CONNECTING A TV CABLE BOX OR SATELLITE RECEIVER  
1. Connect the TV Cable Box or Satellite Receiver device using:  
Component cable and Audio cable or S-Video cable and Audio cable or Composite cable and Audio cable.  
2. Connect all power sources before activating the PDP TV.  
3. Turn on the PDP TV.  
4. Press the button corresponding to the appropriate signal source (Component Video, YCBCR/YPBPR, S-Video or Composite Video)  
19  
HITACHI MODEL 42PD6000TA  
INSTALLATION INSTRUCTIONS (continued)  
Connecting to an Audio Visual Device (continued)  
CONNECTING A DVD PLAYER  
1. Connect the DVD player using:  
HDMI cable or Component cable and Audio cable or S-Video cable and Audio cable or Composite cable and Audio cable.  
2. Connect all power sources before activating the PDP TV.  
3. Turn on the PDP TV.  
4. Press the button corresponding to the appropriate signal source (HDMI, Component Video, YCBCR/YPBPR, S-Video or Composite  
Video)  
CONNECTING A AUDIO RECEIVER  
For improved sound quality, you may want to play the audio of the PDP through your stereo system.  
1. Use an audio cable and Subwoofer cable to connect the PDP’s audio output jacks to the line input jacks on the A/V  
receiver.  
2. Connect all power sources before activating the PDP TV.  
3. Turn on the PDP TV.  
4. Press the MENU to display the menu, then press ▲ ▼ to select Audio.  
5. Press Enter, then press ▲ ▼ to select subwoofer and press W X to select On/Off.  
20  
HITACHI MODEL 42PD6000TA  
INSTALLATION INSTRUCTIONS (continued)  
Connecting to an Audio Visual Device (continued)  
NOTES:  
• If the Video OUTPUT (Monitor) terminal is connected to an external monitor with a 75 Ohm terminal, it is possible to  
view the same image as on the main unit. But it is possible to monitor only the TV signal, Composite Video signal or  
the S-Video signal that is displayed on the screen at the time.  
• If a Video equipment with an S-Video output terminal is used, cabling by the S-Video cable is recommended to provide  
finer Video quality.  
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI  
Licensing LLC.  
• HDMI (High-Definition Multimedia Interface) is a digital interface based on DVI (Digital Visual Interface), which is an  
added function for audio visual equipment.  
– It does not have degradation by transmission since it is digital.  
– With only one cable, it is possible to transmit both picture signals and audio signals.  
• In case of using analog audio, when connecting with DVI-HDMI transformation connector, use analog RGB audio  
terminal for input.  
21  
HITACHI MODEL 42PD6000TA  
I
INSTALLATION INSTRUCTIONS (continued)  
Connecting to a PC  
(1) Make sure that the display signal of the personal computer to be used is compatible with the specifications of  
this device. See "PRODUCT SPECIFICATIONS" concerning the specifications of this device 40  
(2) Make sure that the power switch of the personal computer is turned off.  
~
42  
.
(3) Connect the signal input terminal (PC RGB INPUT) on the rear panel of this device to the display signal output  
terminal of the personal computer.  
• Use a cable that fits the input terminal of this device and the output terminal of the personal computer.  
• Depending on the type of personal computer being connected, the use of an optional conversion adapter or the  
adapter provided with the personal computer may be necessary in some cases. For details, refer to the instruction  
manual of the personal computer or ask the personal computer manufacturer or your local retail dealer.  
CONNECTING PC  
1. Connect the PC using:  
D-Sub cable and 3.5mm Audio cable  
2. Connect all power sources before activating the PDP TV.  
3. Turn on the PDP TV.  
4. Press the button corresponding to the appropriate signal source (PC RGB)  
NOTE  
• This PDP TV can automatically defect and display the signal format. Please refer to “Recommended Signal List” on  
42  
22  
HITACHI MODEL 42PD6000TA  
INSTALLATION INSTRUCTIONS (continued)  
Power Cord Connection  
Connect the power cord, after completing all other connections.  
①
②
③
① Connect the power cord to this device.  
② Use the binders to fix the power cord.  
③ Connect the power cord plug to the power outlet.  
(The type of plug is different from this drawing for some countries.)  
• Use only the power cord provided. (Ask your local retail dealer about the power cord for AV monitor)  
• Do not use a power supply voltage other than that indicated (AC100-240V, 50/60Hz) as this may cause fire or electric  
shock.  
Be cautious of the power cord connection.  
Incorrect connection of the power cord could result in fire or electrical shock.  
• Do not touch the power cord with a wet hand.  
• Check that the connecting portion of the power cord is clean (with no dust), before using. Use a soft and dry cloth to  
clean the power plug.  
• Insert the power plug into a power outlet firmly. Avoid using a loose, unsound outlet or contact failure.  
• Do not cut off the fitted power plug, the removal of which could lead to impaired performance. If you wish to extend the  
lead, obtain an appropriate extension lead or consult your dealer.  
• Should you require replacing the fuse in the molded plug with a new fuse, then please replace with new one of the same  
value, type and approval as the original. Ensure the fuse cover is returned to its origin position.  
23  
HITACHI MODEL 42PD6000TA  
OPERATING INSTRUCTIONS  
Turning Power On and Off  
Indicating lamp  
• To turn the PDP TV power ON, press the main  
power switch on the PDP TV main unit to ON, and  
then press the POWER button of control panel or  
the POWER button on the remote control.  
Remote-control receiver  
Main power switch  
• To turn the TV power OFF, press the POWER  
button of control panel or the POWER button on  
the remote control, and then press the main power  
switch on the PDP TV main unit to OFF.  
• During normal use, the main power switch is set in the  
ON position, and the monitor can then be turned  
ON/OFF using the POWER button or the POWER  
button on the remote control.  
•
The main power switch is located at the back, on the  
right side.  
Indicating lamp  
Indicating Lamp Power Status  
Operating  
When the main power  
switch is set to OFF.  
When the main power  
switch is ON, and the  
POWER button is OFF.  
When the main power  
switch is ON, and the  
power button is ON.  
When the main power  
switch is ON, and the  
power button is ON.  
Off  
Off  
Off  
(Stand-by)  
Lights Red  
Off  
Lights Orange  
Lights Green  
(Power Save)  
Power button  
On  
POWER button  
When the indicating lamp lights in orange or the  
message “No Input Signal” or “Power Save” appears on  
the screen, there is something unusual about the status  
of reception. See “Power Save Mode” or “Symptoms  
That Seemingly Appear to be Failures.” 36  
~
39  
ATTENTION  
• Avoid repeatedly turning the PDP TV on and off at  
short time intervals. Failures might result from such  
operation.  
• Turn off the main power switch before leaving the  
PDP TV out of use for an extended period of time.  
• If a power failure occurs while the main unit is  
running, it would be powered on upon recovery from  
the failure. Turn off the unit main power switch  
before leaving the main unit.  
24  
HITACHI MODEL 42PD6000TA  
OPERATING INSTRUCTIONS (continued)  
MUTE button  
INPUT/EXIT  
button  
CHANNEL S/T  
buttons  
INPUT SELECT  
button  
Input Switching  
• Input can be switched in the sequence of Analog RGB ➝  
HDMI ➝ Composite-Video ➝ S-Video ➝ YCBCR ➝ YPBPR  
➝ TV by pressing the INPUT button of the control panel.  
RGB  
TV  
HDMI  
YPBPR  
Composite-Video  
YCBCR S-Video  
VOLUME  
UP/DOWN  
button  
CHANNEL  
UP/DOWN  
button  
• Input can be switched to TV by pressing CHANNEL S/T  
buttons or NUMBER buttons of the remote control.  
• Input can be switched by pressing the PC, TV/VIDEO or  
HDMI buttons of the remote control.  
Volume Adjustment  
• The volume can be adjusted by pressing the VOLUME S/T  
of the control panel or Vol+ and Vol- buttons of the remote  
control.  
• When a button is pressed, the volume adjustment status guide  
will be displayed.  
• The volume will increase when the volume S or Vol+ buttons are  
pressed while the guide is being displayed.  
• The volume will decrease when the volume T or Vol- buttons are  
pressed while the guide is being displayed.  
Volume setting value  
Volume 32  
Adjustment status guide display  
Audio Mute  
• The audio volume can be temporarily muted by pressing the  
MUTE button of the remote control.  
• The muting can be cancelled by pressing the volume S/T,  
Vol+/- buttons or MUTE button while the audio is mute.  
25  
HITACHI MODEL 42PD6000TA  
OPERATING INSTRUCTIONS (continued)  
Input Signal Screen Display  
The input signal status can be displayed on the screen by pressing the RECALL button of the remote control.  
• The display will go out in approximately 3 seconds.  
TV  
RECALL button  
TV position  
Channel name  
Sound mode  
1
ABCDE  
［I］  
VIDEO/PC RGB  
Signal mode  
Analog RGB  
1024X768 60Hz  
Input frequency  
26  
HITACHI MODEL 42PD6000TA  
OPERATING INSTRUCTIONS (continued)  
Using the Menu Screen (On-screen display system)  
Control panel：  
1. Press MENU of the control panel to display the OSD on your Plasma TV.  
2. Use the CHANNEL ▲▼ and VOLUMEW X to navigate to different menu item.  
3. Use the VOLUME W X to adjust functions.  
4. Press ENTER of the control panel to select functions.  
5. Press EXIT of the control panel to quickly exit from a menu.  
Remote control：  
1. Press MENU on the remote control to display the OSD on your Plasma TV.  
2. Use the ▲▼W X to navigate to different menu item.  
3. Use the W X to adjust functions.  
4. Press ENTER on the remote control to select functions.  
5. Press EXIT on the remote control to quickly exit from a menu.  
THERE ARE TWO DIFFERENT MODES FOR THE OSD AS BELOW:  
TV/Video Mode: Displays when the TV, Composite, S-video, Y-CBCR, Y-PBPR or HDMI is selected.  
PC Mode: Displays when the Analog RGB input is selected.  
TV/Video Mode  
PC Mode  
Video  
Picture Mode  
Brightness  
Contrast  
Video  
Brightness  
Contrast  
H Position  
V Position  
Color Temperature  
Reset  
Color  
Tint  
Sharpness  
Color Temperature  
Reset  
Image  
Audio  
Clock Phase  
Horizontal Clock  
Auto Adjust  
Mute  
Image  
Audio  
P. SIZE  
Border Color Set  
Noise Reduction  
3:2 Pull Down  
Mute  
Volume  
Balance  
Treble  
Volume  
Bass  
Balance  
Subwoofer  
SRS WOW  
Language  
Signal Format  
Advance  
Treble  
Bass  
Language  
System  
Subwoofer  
SRS WOW  
Language  
Signal Format  
Advance  
Language  
System  
PIP Set  
Power Save  
System Reset  
PIP Set  
TV Channel Setup (TV mode only)  
System Reset  
27  
HITACHI MODEL 42PD6000TA  
OPERATING INSTRUCTIONS (continued)  
Video Menu  
TV/Video Mode  
Selected characters  
W
X
Setup hint  
Natural: This setting is for normal lighting conditions.  
Cinema: This setting is best for watching movie.  
Natural  
Cinema  
Dynamic  
Picture Mode  
Brightness  
Dynamic: This setting is best for very bright ambient lighting.  
Black is subdued for Black is set off for  
increased overall  
darkness.  
increased overall  
brightness.  
Adjust to preference.  
Narrows the gap  
Broadens the gap  
Contrast  
Color  
Tint  
between brightness between brightness Adjust for maximum visibility to suit the ambient brightness.  
and darkness.  
Decrease color  
intensity.  
and darkness.  
Increase color  
intensity.  
Adjust to preference.  
Enhances red and  
weakens green.  
Enhances green and This is not available to adjust when receiving PAL/SECAM signal.  
weakens red.  
Then the character will be grayed out.  
Adjust for most realistic skin color.  
Sharpness  
Soft  
Sharp  
Shift to the minus (-) side for a softer effect and plus (+) for sharper picture.  
Cool  
User  
Normal  
Warm  
Color Temperature  
Normally set to Cool.  
Black & White  
The original factory settings for the items of this Menu page can be restored by  
pressing the ENTER button.  
Reset  
(off the function)  
-
PC Mode  
Selected characters  
W
X
Setup hint  
Black is subdued for Black is set off for  
Brightness  
Contrast  
increased overall  
darkness.  
increased overall  
brightness.  
Adjust to preference.  
Narrows the gap  
Broadens the gap  
Adjust for maximum visibility to suit the ambient brightness.  
(Not available for 480p/576p/720p/1080i signals)  
between brightness between brightness  
and darkness. and darkness.  
Moves the horizontal Moves the horizontal  
Adjust the left-side display position.  
position to left  
position to right  
H Position  
V Position  
(Not available for 480p/576p/720p/1080i signals)  
Moves down the  
vertical position.  
Moves up the vertical  
position.  
Adjust for maximum character clarity.  
(Not available for 480p/576p/720p/1080i signals)  
Cool  
User  
Normal  
Warm  
Color Temperature  
Reset  
Normally set to Cool.  
Black & White  
The original factory settings for the items of this Menu page can be restored by  
pressing the ENTER button.  
(off the function)  
-
28  
HITACHI MODEL 42PD6000TA  
OPERATING INSTRUCTIONS (continued)  
Image Menu  
TV/Video Mode  
Selected characters  
W
X
Setup hint  
Panoramic  
4:3 Standard  
16:9 Zoom  
Full  
4:3 Zoom1  
4:3 Zoom2  
Adjust to preference. (Please refer to 14 for more detail.)  
P. SIZE  
(Available for TV/480i/480p/576i/576p/HDMI  
signals.)  
Panoramic  
Full  
16:9 Zoom  
(Available for 720p/1080i/HDMI signals.)  
Adjust to when display 4:3 video.  
Black  
Gray  
This turns the gray sidebars to the black sidebars when watching normal mode  
screen size area. It is always set to Off when the monitor powered On. It is  
recommended to set to Gray to reduce the panel image retention.  
(Not available for 720p/1080i/HDMI signals.)  
Border Color Setting  
Noise Reduction  
Adjust to when display static image  
Off  
Level 1  
Level 2  
Level 3 If this is set to On, it helps to reduce the noise interference visible on the static  
image, especially in the weaker signal reception areas.  
(Not available for YPBPR/HDMI signals.)  
PC Mode  
Selected characters  
W
X
Setup hint  
Slows the dot clock  
phase (shifts slightly clock phase (shifts  
to left). slightly to right).  
Advances the dot  
Clock Phase  
Adjust for clear character visibility.  
Reduces the dot clock Increases the dot  
frequency (shrinks the clock frequency  
right side).  
(expands the right  
side).  
Horizontal Clock  
Auto Adjust  
Adjust for maximum character clarity.  
Pressing the ENTER button, automatic regulation is started.  
Horizontal Position, Vertical Position, Horizontal Clock and Clock Phase are  
adjusted automatically.  
(off the function)  
-
(Not available for 480p/576p/720p/1080i signals)  
29  
HITACHI MODEL 42PD6000TA  
OPERATING INSTRUCTIONS (continued)  
Audio Menu  
Selected characters  
W
X
Setup hint  
Disable  
Enable  
Mute  
Adjust to turn off the sound.  
Turns down the  
volume.  
Volume  
Balance  
Treble  
Turns up the volume. This is to set the volume for speaker.  
Suppresses right-side Suppresses left-side  
Adjust to preference.  
sound.  
sound.  
Adjust to preference.  
Suppresses treble.  
Suppresses bass.  
Enhances treble.  
Enhances bass.  
(When SRS WOW select “On”, this function is not available)  
Adjust to preference.  
Bass  
(When SRS WOW select “On”, this function is not available)  
On  
On  
Off  
Off  
Subwoofer  
SRS WOW  
Adjust to preference.  
Adjust to preference.  
SRS WOW is an audio enhancement technology from SRS Labs that provides deep, rich bass on any speaker system without the need  
for a subwoofer or additional extra physical components. For systems with a subwoofer, SRS WOW complements and enhances the  
bass performance. This feature can be set to On or Off.  
NOTES:  
WOW, SRS and the  
symbol are trademarks of SRS Labs, Inc. SRS WOW technology is incorporated under  
license from SRS Labs, Inc.  
Language Menu  
Selected characters  
W
X
Setup hint  
English  
繁體中文  
Language  
简体中文  
Adjust to preference.  
Русский  
日本語  
30  
HITACHI MODEL 42PD6000TA  
OPERATING INSTRUCTIONS (continued)  
System Menu  
TV/Video Mode  
NOTES: When operating the TV at first time, its TV system is at “default factory mode” and this mode cannot display the image  
normally on the screen. In order to watch the TV program without problem, please execute “TV Channel Setup” menu for  
normally display..  
Selected characters  
Signal Format  
W
X
Setup hint  
(off the function)  
-
Press the ENTER button to show the information of the current input signal.  
Advanced  
Press ENTER button to select the following functions  
On  
Off  
Use only for the NTSC system. Improve the quality as good as Super-video  
input. (Available for TV/Component signals.)  
3D Comb  
Gamma  
AFC  
2.2  
2.6  
2.8  
Adjust to preference. (Available for TV signal.)  
On  
On  
Off  
Off  
Auto Frequency Control. Auto tuning the channel frequency to the correct  
location.  
This is for locking out the control panel function.  
Panel Lock  
Adjust to prevent children from touching.  
Adjust to preference.  
Off  
Mode 1  
Mode 2  
The moves the picture around the screen to reduce the panel image retention.  
This is where stationary objects, such as screen logos, leave a slight image  
visible after they should have disappeared.  
Mode  
Move Screen  
Time  
Adjust to preference.  
This moves the picture around the screen in small amounts, at set intervals, to  
reduce the panel image retention. This is where stationary objects, such as  
screen logos, leave a slight image visible after they should have disappeared.  
5 ~ 255 sec  
PIP Set  
Source  
Press ENTER button to select the following functions  
TV  
AV  
SV  
Adjust to preference.  
Adjust to preference.  
Small  
Medium  
Large  
Size  
9 positions for selection:  
Upper Left, Upper Center, Upper Right,  
Middle Left, Middle Center, Middle Right,  
Lower Left, Lower Center, Lower Right  
Position  
Audio Source  
Adjust to preference.  
Main  
PIP  
Adjust to preference.  
Adjust to preference.  
Black is subdued for Black is set off for  
Brightness increased overall  
increased overall  
brightness.  
darkness.  
Narrows the gap  
Broadens the gap  
PIP Display  
Contrast  
between brightness between brightness Adjust for maximum visibility to suit the ambient brightness.  
and darkness.  
Decrease color  
intensity.  
and darkness.  
Increase color  
intensity.  
Color  
Adjust to preference.  
Adjust to preference.  
Main  
PIP  
Swap  
TV Channel Setup  
Press ENTER button to select the following functions (only available under TV mode)  
Select the channel entry method between position setting or direct setting. And  
press the ENTER button in SEARCH function to fix it. Please use auto search  
when you first use your TV.  
Position  
Direct  
• [Position] search the channel by frequency from 48.25~863.25MHz. We  
suggest to use these function for the channel setting  
• [Direct] search the channel by CCIR PAL B/G table. Provide the faster  
speed than position mode, but some channels which are not in the table  
may be lost.  
Channel Auto Mode  
Search  
Search  
(off the function)  
-
Press the ENTER button and it starts the auto tuning.  
31  
HITACHI MODEL 42PD6000TA  
OPERATING INSTRUCTIONS (continued)  
System Menu (continued)  
TV/Video Mode  
Selected characters  
W
X
Setup hint  
This is used to input the channel number for the channel you would like to  
insert in the sort list after you found the channel form “Channel Frequency”  
function.  
Channel  
Number  
Decrease channel  
number  
Increase channel  
number  
NTSC  
SECAM DK  
SECAM BG  
PAL B/G  
PAL I  
System  
Select the system through the 6 different settings.  
Channel  
PAL D/K  
Manual  
This is used to input the name for the channel you would like to insert in the  
sort list. After fixing the cursor on the first digit, select a letter by W, X, ▲,  
▼and ENTER buttons.  
Search  
Channel  
Name  
(Use to add  
the channel  
by manual)  
(off the function)  
-
• Selectable letters are “0”~”9”, ”A”~”Z”, “_”, “-”, ”□” and ”,”(comma).  
• Press the ENTER buttons to enter this function, then press W X to search  
the channel.  
Frequency  
Auto  
(off the function)  
(off the function)  
-
-
Search  
• Press ENTER or Exit buttons to stop searching.  
Channel  
Frequency  
Channel  
Insert  
This is used to search the channel frequency directly.  
This is used to add the channel to the sort list.  
(off the function)  
West Europe  
-
East Europe  
Teletext Language  
Select the language depends on your country or area.  
Turkish  
Decrease channel  
number  
Cyrillic  
Increase channel  
number  
Channel  
Show the channel position number which you want to edit.  
Number  
This is used to input the name for the channel you would like to insert in the  
sort list. After fixing the cursor on the first digit, select a letter by W, X, ▲,  
▼and ENTER buttons.  
Channel  
Name  
(off the function)  
-
• Selectable letters are “0”~”9”, ”A”~”Z”, “_”, “-”, ”□” and ”,”(comma).  
NTSC  
PAL B/G  
PAL I  
Sort  
(Press SORT  
EDIT button to  
modify the list)  
System  
SECAM DK  
Select the system through the 6 different settings.  
SECAM BG  
PAL D/K  
Decreasing the  
Increasing the  
Fine Tune frequency data for the frequency data for the After completing the fine tune, press the ENTER button to exit this mode.  
main tuner  
main tuner.  
-
Erase  
Channel  
Name  
(off the function)  
This is used to delete the channel from the sort list.  
The original factory settings for the items of this Menu page can be restored by  
pressing the ENTER button.  
System Reset  
(off the function)  
-
32  
HITACHI MODEL 42PD6000TA  
OPERATING INSTRUCTIONS (continued)  
System Menu (continued)  
PC Mode  
Selected characters  
W
X
Setup hint  
Signal Format  
Advanced  
(off the function)  
-
Press the ENTER button to show the information of the current input signal.  
Press ENTER button to select the following functions  
2.2  
2.6  
2.8  
Gamma  
Adjust to preference.  
On  
Off  
This is for locking out the control panel function.  
Panel Lock  
Adjust to prevent children from touching.  
Adjust to preference.  
Off  
Mode 1  
Mode 2  
The moves the picture around the screen to reduce the panel image retention.  
This is where stationary objects, such as screen logos, leave a slight image  
visible after they should have disappeared.  
Mode  
Time  
Move Screen  
Adjust to preference.  
This moves the picture around the screen in small amounts, at set intervals, to  
reduce the panel image retention. This is where stationary objects, such as  
screen logos, leave a slight image visible after they should have disappeared.  
5 ~ 255 sec  
PIP Set  
Source  
Press ENTER button to select the following functions  
TV  
AV  
SV  
Adjust to preference.  
Adjust to preference.  
Small  
Medium  
Large  
Size  
9 positions for selection:  
Upper Left, Upper Center, Upper Right,  
Middle Left, Middle Center, Middle Right,  
Lower Left, Lower Center, Lower Right  
Position  
Audio Source  
Adjust to preference.  
Main  
PIP  
Adjust to preference.  
Adjust to preference.  
Black is subdued for Black is set off for  
Brightness increased overall  
darkness.  
increased overall  
brightness.  
Narrows the gap  
Broadens the gap  
PIP Display  
Adjust for maximum visibility to suit the ambient brightness.  
Contrast  
Color  
between brightness between brightness  
For normal viewing we recommend that the Contrast is set to [46].  
and darkness.  
Decrease color  
intensity.  
and darkness.  
Increase color  
intensity.  
Adjust to preference.  
Adjust to preference.  
Main  
PIP  
Swap  
On  
Off  
This is used to reduce power consumption when there is no signal. Setting it  
On will lead the PDP TV to the standby mode when the PC input no signal.  
Power Save  
System Reset  
The original factory settings for the items of this Menu page can be restored by  
pressing the ENTER button.  
(off the function)  
-
33  
HITACHI MODEL 42PD6000TA  
OTHER FUNCTIONS  
Audio Switching  
1
ABCDE  
▼
A2 / NICAM / Sound Multiplex (TV mode)  
• The I/II button in remote control is useful for NICAM and sound multiplex signals.  
Otherwise pressing this button will have no effect.  
BILINGUAL / DUAL sound broadcast  
When bilingual program is received, sound mode display appears as shown on right.  
Press the I/II button to select the sound to be heard.  
Each time the button is pressed, ［I］Language A, ［II］Language B, ［I/II］Language A/B or ▼ Mono appear cyclically on the screen.  
When receiving NICAM signals, NICAM display will appear as below.  
Green  
Yellow  
Sound multiplex signal received  
Yellow  
Yellow  
▼
［I］  
［II］  
［I/II］  
Green  
Yellow  
Yellow  
Yellow  
NICAM signal received  
NICAM ▼  
NICAM［I］  
NICAM［II］  
NICAM［I/II］  
STEREO sound broadcast  
When a stereo program is received, sound mode display will appear, and you can press the I/II button to select between stereo and  
mono sound.  
Each time the button is pressed, ▼ Mono or  
Stereo appear cyclically on the screen.  
When receiving NICAM signals, NICAM display will appear as below.  
Red  
Green  
Sound multiplex signal received  
▼
Red  
Indicatin  
NICAM signal received  
NICAM ▼  
NICAM  
Monaural sound broadcast  
When a monaural program is received, sound mode display will appear.  
NOTE  
• If sound signal is not strong enough for quality reception, press the I/II button until ▼ appears on the screen to receive a  
clear mono sound.  
• If sound has hiss noise or keep switching between stereo and mono mode due to signal condition, press the I/II button until  
▼ appears on the screen to receive a clear mono sound.  
34  
HITACHI MODEL 42PD6000TA  
OTHER FUNCTIONS (continued)  
Signal Check (Analog RGB mode)  
Changes in the signal status are displayed on the screen as they arise.  
Status  
Display  
Action  
When Mode Display is set to A guide is displayed for the  
ON, the input signal is  
switched or when the  
RECALL button is pressed. frequency.  
input terminal and the  
horizontal and vertical sync  
Analog RGB  
1024X768 60Hz  
When the sync signal is no • A guide displays No Input  
Recheck the personal  
computer power switch  
status and the  
longer detected.  
Signal, and Power Save  
(for approx. 5 sec.)  
• When the condition  
connection status.  
continues where the sync  
signal cannot be detected,  
indicator lamp of power  
source changes in orange  
and the mode switches to  
power save mode.  
No Input Signal  
Going to suspend  
(Going to standby)  
When the input signal does A guide displays No Input  
Recheck the input  
not match the monitor  
specifications or is in an  
unstable status.  
Signal.  
signal specifications.  
No Input Signal  
Going to sleep  
Signal Check (TV/Video mode)  
Changes in the signal status are displayed on the screen as they arise.  
Mode  
Status  
Display  
Action  
TV  
When the TV signal • A guide is displayed for  
• Recheck the antenna  
2 : 0 0  
No Input Signal  
Searching  
is no longer  
detected.  
searching and counting down connection status.  
2 minutes.  
• Reception other than  
• If the TV signal cannot be  
those of broadcasting  
detected after 2 minutes, the stations can be  
PDP TV will turn off directly  
and indicator lamp is going to  
red.  
considered.  
Video When the sync.  
• A guide displays No Sync.  
• Recheck the device  
power switch status  
and the connection  
status.  
signal is no longer Signal in orange.  
detected.  
(Video source name)  
No Sync. Signal  
• Recheck the device  
connection status.  
• Recheck the input  
signal specifications.  
35  
HITACHI MODEL 42PD6000TA  
OTHER FUNCTIONS (continued)  
Power Save Mode  
When the Analog RGB input is selected  
• When this unit is connected to a VESA DPMS computer, the Power Save (Off) mode can be set to be activated automatically when the  
computer is not being used to reduce power consumption by this unit.  
RGB sync  
signal  
Horizontal  
Vertical  
Yes  
No  
Yes  
No  
No  
No  
Yes  
Active (normal display)  
On  
Yes  
PC signal  
Blank (no display)  
Off  
Operation mode  
Indicating lamp  
Lights green  
350 W  
Lights orange  
3W (100V~240V)  
Power consumption  
Returning to operating status  
• Operate the personal computer, or press either the INPUT button of the main unit or the PC button of the remote control.  
36  
HITACHI MODEL 42PD6000TA  
TROUBLESHOOTING  
Symptoms That Seemingly Appear to be Failures  
Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact  
your dealer.  
Customer servicing can be hazardous.  
Symptom  
Point to check  
See page  
• No picture with the power-indicating  
lamp off.  
• Check the way the power cord is connected.  
• Press the power switch.  
23  
24  
• The message “No Input Signal. Going to  
suspend” or “Power Save” is displayed.  
• No picture with the power indicating lamp  
lights in orange.  
No input signal is detected.  
• Check the way the signal cable is connected.  
• Make sure that the switch of the computer, imaging  
equipment, etc., is turned on.  
No Input Signal  
22  
• Make sure the computer is not in the power-save mode.  
• Check to see if the input selection matches the connection  
terminal.  
• The message “No Input Signal. Going to  
sleep” is displayed.  
An input signal is not received normally.  
• Check to see if the input signal matches the  
specifications.  
22  
40  
No Input Signal  
• Check the way the signal cable is connected.  
• Check the contrast and brightness settings (adjust them for  
higher contrast and brightness).  
• Check the way the signal cable is connected.  
• Adjust the dot clock frequency and phase. (Adjust the dot  
clock frequency first, the dot clock phase next.)  
(PC RGB input)  
• The power indicating lamp is normally lit  
but no picture.  
19  
28  
• The display image appears flowing  
slantwise.  
• Text displayed across the screen  
appears vertically streaked, with the  
characters in vertical columns blurred.  
29  
41  
• Text displayed across the screen  
appears blurred.  
• A fine pattern flickers when displayed on  
the screen.  
• Adjust the dot clock phase for the clearest viewing.  
(PC RGB input)  
29  
41  
• Check to see if the batteries are loaded in the remote  
control in opposite direction.  
• The remote control does not work.  
11  
• Check to see if the batteries in the remote control are OK.  
• Check to see if the displayed input signal match the PDP  
TV specification by pressing RECALL button.  
• Turn off the Move screen.  
• The display image does not appear in  
the normal position.  
31  
40  
• The display has lack of picture around  
the screen.  
(PC RGB input)  
• Turn off the Move screen.  
31  
-
• The temperature of the display panel surface is high.  
• The plasma display panel is lighting the phosphors by the  
discharge of internal radiation. In some cases, this may  
cause the temperature of the panel surface to increase.  
Please note that this is not a malfunction.  
37  
HITACHI MODEL 42PD6000TA  
TROUBLESHOOTING (continued)  
Symptoms That Seemingly Appear to be Failures (continued)  
Symptom  
• There are locations on the screen that are different from the • High-precision technology is used to manufacture the  
periphery (*). plasma display panel, However in some cases, there are  
Point to check  
See page  
*Points that do not light, points with brightness different from minor defects in some parts of the screen. Please note that  
that of the periphery, points with color different from that of this is not a malfunction.  
the periphery, etc.  
-
• Vertical stripes appear, depending on the screen contents. • The plasma display panel is lighting the phosphors by the  
discharge of internal radiation. Depending on the screen  
contents, in rare cases this may cause vertical stripes to  
-
appear because of failure to light. Please note that this is  
not a malfunction.  
• Coarse horizontal stripes appear in FULL display.  
• Adjusting the Clock Phase will reduce the horizontal  
stripes.  
29  
(PC RGB input)  
• Flickering in the form of horizontal lines oscillating up and • If the direct frequency from the computer is below 85Hz, try  
down. (PC RGB input only)  
a higher frequency (upper limit 85Hz). There may be a  
slight attenuation of the current image.  
42  
-
• The top of the monitor heats up.  
• When used for long periods of time, the top of the monitor  
may heat up. This is not a malfunction.  
• Text characters are displayed with varying thicknesses.  
• The thicknesses of characters and lines may vary if images  
with a vertical resolution greater than 512 lines are  
displayed; however, this is not a malfunction.  
-
• The screen becomes dark and the images can not be seen • This sometimes occurs when a component output VTR  
during VTR special playback (fast forward, rewind)  
such as the 480i is connected.  
This is not a malfunction; therefore, please take note that  
this may occur. When it does occur, change to composite  
output, or S-video output.  
-
• During PIP mode, sub pictures are not displayed.  
• Sub pictures image might not be able to be displayed,  
depending on the combination.  
15  
-
(Refer to the table of PIP input table)  
• The screen display sizes are not switched.  
• Images from HDMI are not displayed.  
• The screen display size is fixed at “Full” as receiving VGA  
signal.  
• Check the cable and output format of connecting device.  
(Refer to “Connecting to an Audio Visual Device”.)  
19  
20  
21  
41  
38  
HITACHI MODEL 42PD6000TA  
TROUBLESHOOTING (continued)  
Actions to Correct Abnormal Displays  
Depending on the kind of system equipment used, images may not be displayed normally. In this case, make the  
adjustments suggested below. (only for PC RGB)  
Text displayed across the screen appears vertically streaked, with some characters blurred (Figure 1).  
(PC RGB input).  
Symptom 1  
Figure 1  
Example  
1) Press the MENU button. The Main Menu will be displayed.  
2) Press the ▼ button and select “IMAGE”.  
3) Press the ENTER button. The “IMAGE” Menu will be displayed.  
4) Press the ▼ button and select “Auto Adjust”.  
When adjustment is not possible with Auto Adjust  
5) Press the MENU button. The Main Menu will be displayed.  
Adjustment  
6) Press the ▼ button and select “IMAGE”.  
Procedure  
7) Press the ENTER button. The Setup Menu will be displayed.  
8) Press the ▼ button and select “Horizontal Clock”.  
(Display fine patterns as characters or a vertical striped pattern over the entire screen during Horizontal Clock  
adjustment.)  
9) Press the W or X buttons and search for clear characters over the entire screen.  
10) Perform adjustment for symptom 2 below, when the characters are blurred on the entire screen.  
• The display image may be momentarily disturbed during clock adjustment but this is not a failure.  
Text displayed across the screen appears blurred in its entirety (Figure 2).  
Symptom 2  
A fine pattern flickers when displayed on the screen (Figure 3).  
Figure 2  
Figure 3  
Example  
1) Press the MENU button. The Main Menu will be displayed.  
2) Press the ▼ button and select “IMAGE”.  
3) Press the ENTER button. The Setup Menu will be displayed.  
4) Press the ▼ button and select “Auto Adjust”.  
When adjustment is not possible with Auto Adjust  
Adjustment  
procedure  
5) Press the MENU button. The Main Menu will be displayed.  
6) Press the ▼ button and select “IMAGE”.  
7) Press the ENTER button. The Setup Menu will be displayed.  
8) Press the ▼ button and select “Clock Phase”.  
(Display fine patterns as characters or a vertical striped pattern over the entire screen during Clock Phase adjustment.)  
9) Press W or X buttons to make the text appear clean  
9) Press W or X buttons to make the text appear without  
across the screen.  
flickering.  
39  
HITACHI MODEL 42PD6000TA  
PRODUCT SPECIFICATIONS  
Display dimensions  
Resolution  
Approx. 42 inches (926 (H) x 525 (V) mm, diagonal 1064mm)  
1024(H) x 1024 (V) pixels  
Panel  
Net dimensions  
Net weight  
1036 (W) x 713 (H) x 93 (D) mm  
35 kg  
Ambient  
conditions  
Temperature  
Operating : 5°C to 35°C, Storage : 0°C to 40°C  
Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)  
AC100 - 240V, 50/60Hz  
Relative humidity  
Power supply  
Power consumption/at standby  
Audio output  
350W / <3W  
speaker 10W + 10W (8Ω)  
(RGB input)  
D-Sub input terminal (D-sub 15-pin)  
PC audio input terminal (3.5mm Stereo Mini Jack)  
Input terminals  
Input signals  
0.7Vp-p, analog RGB (Recommended Signal)  
H/V Separate, TTL level[2kΩ]  
H/V Composite, TTL level[2kΩ]  
Sync on green, 0.3Vp-p[75Ω]  
Sync signals  
Recommended signal  
(Video input)  
19 modes 42  
Composite video input terminal (RCA)  
Composite video L/R audio input terminal (RCA)  
S-Video input terminal  
Input terminals  
S-Video L/R audio input terminal (RCA)  
Component - YCBCR/YPBPR video input terminal (RCA)  
Component - YCBCR/YPBPR L/R audio input terminal (RCA)  
HDMI input terminal  
Composite video: PAL, SECAM, NTSC3.58, NTSC4.43  
Component - YCBCR/YPBPR video: 480i, 576i, 480p, 576p, 1080i/50, 1080i/60,  
720p/50, 720p/60  
S-Video: PAL, SECAM, NTSC4.43, NTSC3.58  
HDMI: HDMI input signal  
Input signals  
Output Signal  
Video Output: TV/Composite video/S-Video output terminal (RCA)  
Audio Output: L/R audio output terminal (RCA)/Subwoofer output terminal(RCA)  
Recommended signal  
(RF input)  
19 modes 41  
Input terminals  
ANT : 75Ω Unbalanced  
PAL B,G/ I / D,K  
NTSC-M  
RF Video System  
SECAM B,G / D,K  
This monitor takes at least 30 minutes to attain the status of optimal picture quality.  
40  
HITACHI MODEL 42PD6000TA  
PRODUCT SPECIFICATIONS (continued)  
Recommended Signal List  
With composite input and S-Video input.  
Signal mode  
Horizontal  
frequency (kHz)  
Dot clock  
frequency (MHz)  
No.  
Remarks  
Vertical frequency  
(Hz)  
Signal Name  
Resolution  
525  
NTSC4.43  
NTSC3.58  
PAL  
1
2
59.94  
50.00  
15.734  
15.625  
—
—
625  
SECAM  
With YCBCR/YPBPR input  
Signal mode  
Resolution  
Horizontal  
frequency (kHz)  
Dot clock  
frequency (MHz)  
No.  
Remarks  
Vertical frequency  
(Hz)  
Signal Name  
1
2
3
4
5
6
7
8
576i  
480i  
576  
480  
50.00  
15.63  
15.73  
31.26  
31.47  
28.13  
33.75  
37.00  
45.00  
—
—
—
—
—
—
—
—
59.94  
576p  
576  
50.00  
480p  
480  
59.94  
1080i/50  
1080i/60  
720p/50  
720p/60  
1080  
1080  
720  
50.00  
60.00  
50.00  
720  
60.00  
With HDMI input  
No.  
Signal mode  
Resolution  
Horizontal  
frequency (kHz)  
Dot clock  
frequency (MHz)  
Remarks  
Vertical frequency  
(Hz)  
Signal Name  
1
2
3
4
5
6
7
8
9
VGA  
640 x 480  
720(1440) x 576  
720(1440) x 480  
720 x 576  
59.94  
31.47  
31.25  
15.73  
31.25  
31.47  
28.13  
33.75  
37.50  
45.00  
25.18  
54.00  
27.00  
27.00  
27.00  
74.25  
74.25  
74.25  
74.25  
VESA  
576i  
480i  
50.00  
EIA-861B  
EIA-861B  
EIA-861B  
EIA-861B  
EIA-861B  
EIA-861B  
EIA-861B  
EIA-861B  
59.94  
576p  
480p  
1080i  
1080i  
720p  
720p  
50.00  
720 x 480  
59.94  
1920 x 1080  
1920 x 1080  
1280 x 720  
50.00  
60.00  
50.00  
1280 x 720  
60.00  
41  
HITACHI MODEL 42PD6000TA  
PRODUCT SPECIFICATIONS (continued)  
Recommended Signal List (continued)  
With Analog RGB signal input  
Signal mode  
Horizontal  
frequency (kHz)  
Dot clock  
frequency (MHz)  
No.  
Remarks  
Vertical frequency  
(Hz)  
Signal Name  
Resolution  
1
2
VGA  
VGA  
640 x 400  
640 x 480  
640 x 480  
640 x 480  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
1024 x 768  
1024 x 768  
1024 x 768  
1024 x 768  
1280 x 720  
1280 x 960  
1280 x 1024  
1280 x 1024  
70.09  
31.47  
31.47  
35.00  
37.86  
37.50  
43.27  
35.16  
37.88  
48.08  
46.88  
53.67  
48.36  
56.48  
60.02  
68.68  
45.11  
60.00  
63.98  
79.98  
25.18  
25.18  
30.24  
31.50  
31.50  
36.00  
36.00  
40.00  
50.00  
49.50  
56.25  
65.00  
75.00  
78.75  
94.50  
76.50  
108.00  
108.00  
135.00  
59.94  
3
Macintosh  
VGA  
66.67  
4
72.81  
5
VGA  
75.00  
6
VGA  
85.01  
7
SVGA  
SVGA  
SVGA  
SVGA  
SVGA  
XGA  
56.25  
8
60.32  
9
72.19  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
75.00  
85.06  
60.00  
XGA  
70.07  
XGA  
75.03  
XGA  
85.00  
XGA  
60.14  
XGA  
60.00  
XGA  
60.02  
XGA  
75.03  
．The type of video board or connecting cable used may not allow for correct displays adjustment of Horizontal Position,  
Vertical Position, Horizontal Clock and Clock Phase.  
．The monitor may fail to display an animation image correctly when a signal having a vertical frequency of 85Hz or  
higher is input to it.  
．The monitor differentiates the signal modes according to the horizontal an vertical frequencies and the horizontal and  
vertical sync signal polarities. Note that different signals having all these elements alike may be handled as the same  
signal.  
．Displaying images with more than 512 lines of vertical resolution at Full display(compressed display) can result in the  
interpolation of stripes.  
42  

York Affinity Czh024 Thru 060 User Manual
Xerox Docushare 60 User Manual
Swann Sw231 Flo User Manual
Sanyo 24khs72 User Manual
Samsung As07a1 A2 Va User Manual
Panasonic Kx Tem824 User Manual
MAKITA XAG10 User Manual
HP DESKJET D4368 User Manual
HP A7173A User Manual
ASUS VP229DA User Manual