Pro Bar HD 100
Antenna
User’s Manual
33683
Version 01
Antenna assembly:
1. Remove contents from the box.
2. Unwind coax cable and feed coax cable through center
base.
3. After feeding coax cable through, insert antenna onto the
base ensuring that you line
up the holes on the bottom
of the antenna to the pegs
of the stand.
i. Push the coax cable
into the channel on the
bottom of the stand until
the cable is flush with the
bottom of the stand.
Wall mounting
For best reception, you will likely want to mount the antenna
above your television. Please follow the instructions below for
proper wall mounting.
1. Using the supplied adhesive strips, attach the adhesive
strips to the side of the antenna that you do not want to be
displayed (black or white).
2. Remove the covering of the adhesive strips so the adhesive
area is exposed, press the antenna against the wall in your
desired location and hold for 10 seconds.
3
Installation:
Easy Installation for Analog TVs with Set-Top Box
1. Connect the coax cable from the antenna directly
to the set-top box antenna input.
2. Connect another coax cable (not included) from
the set-top box output directly to the antenna
input on your TV.
3. Run a channel scan on your set-top box, following
your set-top box instruction manual.
Easy Installation for Today’s HDTVs
1. Connect the coax cable from the antenna directly
to the antenna input on your HDTV.
2. Run a channel scan on your television, following
your TV’s instruction manual.
DTV Reception Maps to determine the available television
stations and location of the broadcast towers in your area.
For further assistance, call 1-800-654-8483 for technical
support.
MADE IN CHINA
GE is a trademark of General Electric Company and
is under license by Jasco Products Company LLC,
10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a limited-lifetime
warranty details and product registration.
Questions? Contact us at 1-800-654-8483 between
7:30AM—5:00PM CST.
4
|