26730
4. After charging, plug
the telephone line
CHANNEL BUTTON
DIALING A CALLER ID NUMBER
INTRODUCTION
INSTALLATION
CALLER ID FEATURES
25-Channel Caller ID with Call
Waiting Cordless Telephone
User's Guide
cord into the wall jack.
While talking, you might need to manually change the
channel in order to get rid of static. Press and release the
CHANNEL button to advance to the next clear channel.
1. Make sure the phone is OFF.
Your Caller ID phone stores and displays specific
information, provided by your local telephone company, to
subscribers of Caller ID or similar caller identification
services. You must subscribe to one of these services in
order to use this unit.
This unit receives and displays information transmitted by
your local phone company. This information can include
the phone number, date, and time; or the name, phone
number, date, and time. The unit can store up to 40 calls
for later review.
5. Attach the mounting
bracket by inserting
the two tabs at the top
and then snapping the
tab at the bottom into
place.
2. Use the arrow (* and #) buttons to display the desired
Caller ID record.
DESKTOP INSTALLATION
NOTE: For desktop charging only, the handset is able
7
6
3. Press CALL BACK. The number dials automatically.
to charge facing up or down.
TEMPORARY TONE
Your Caller ID phone enables you to:
This feature enables pulse (rotary) service phone users to
access touch-tone services offered by banks, credit card
companies, etc., by pressing the TONE button to
temporarily make the phone touch-tone compatible. To get
information about your bank account, for example, you
would:
4
CHANGING THE NUMBER FORMAT
CALLER ID WITH CALL WAITING
•
•
•
•
Identify callers before you answer the phone.
View the time and date of each incoming call.
Record up to 40 Caller ID messages sequentially.
Know who called while you were away.
1
6. Slip the mounting
holes over the wall
plate posts and slide
the unit down firmly
into place. (Wall plate
not included.)
The FORMAT button lets you change the format of the
displayed number. The available formats are as follows.
Provided you subscribe to Caller ID with Call Waiting
service from your phone company, you are able to see who
is calling when you hear the call waiting beep. The caller
identification information appears in the display after you
hear the tone.
2
5
7-digit
7-digit telephone number.
5
1. Call the bank’s information line.
10-digit
3-digit area code + 7-digit telephone
number.
2. Press the TONE button (*) after your call is answered.
•
Press the FLASH button to put the current person on
hold so that you can answer the incoming call.
7. Raise the base
antenna.
To get the most from your new phone, we suggest that you
take a few minutes right now to read through this user's
guide.
3. Follow the voice instructions to complete your
transaction.
NOTE : The phone automatically defaults to touch-
tone dialing. To change to pulse (rotary) dialing, see
“Tone/Pulse Dialing”. If you don’t know which type of
service you have, check with the phone company.
11-digit
long distance code “1” + 3-digit area code+
7-digit telephone number.
3
IMPORTANT: In order to use this feature, you must
subscribe to either the standard Name/Number Caller
ID Service or Caller ID with Call Waiting Service. To
know who is calling while you are on the phone, you
must subscribe to Caller ID with Call Waiting Service.
IMPORTANT: In order to use this feature, you must
subscribe to either the standard Name/Number Caller
ID Service or Caller ID with Call Waiting Service. To
know who is calling while you are on the phone, you
must subscribe to Caller ID with Call Waiting Service.
4. Hang up when finished. The phone returns to pulse
(rotary) service.
4
1. Use the arrow buttons (* and #) to scroll to the number
you want to call back.
FINDING THE HANDSET
2. If the number will not dial as shown, press the FORMAT
button. Repeat if necessary, until the correct number of
digits are shown.
CORDLESS PHONE BASICS
This feature helps to locate a misplaced handset.
IMPORTANT: Because cordless phones operate on
electricity, you should have at least one phone in your
home that isn’t cordless, in case the power in your
home goes out.
1. Place the handset in the base.
2. Raise the base antenna.
Press the PAGE/FIND button on the base. The handset
beeps continuously for about 2 minutes or until you press
any button on the handset.
RECEIVING AND STORING CALLS
3. Press CALL BACK. The number dials automatically.
When you receive a call, the information is transmitted by
the phone company to your Caller ID telephone between
the first and second ring.
3. Plug the power supply cord into an AC outlet. The
CHARGE/IN USE indicator comes on indicating that the
battery is charging.
NOTE: To clear the local area code, press and hold
CHANNEL until AREA CODE appears. Then enter
"000".
RINGER SWITCH
The RINGER switch must be ON for the handset to ring
during incoming calls.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
When the memory is full, a new call automatically replaces
the oldest call in memory. NEW appears in the display for
calls received that have not been reviewed.
Allow the phone to charge for 12 hours before
using the first time. If you don't charge the phone
properly (for 12 hours) when you first set up the
phone, performance of the battery will be
compromised.
THE LIGHTNINGCAUTION: TO REDUCE THE
THE EXCLAMATIO
FLASH AND ARROW-
RISK OF ELECTRIC SHOCPKO,INT WITHIN TH
HEAD WITHIN THE
DO NOT REMOVE COVETRR I A N G L E I S
A
TRIANGLE IS
A
WARNING SIG
(OR BACK). NO USER-
WARNING SIGN
ALERTING YOU
O
SERVICEABLE PARTS IN-
ALERTING YOU OF
I
M
P
O
R
T
A
N
T
SIDE. REFER SERVICING
WARNING:TO PREVENT FIRE
OR ELECTRICAL SHOCK HAZARD,
DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
"
D
A
N
G
E
R
O
U
S
I N S T R U C T I O N
A C C O M PA N Y I N
T H E P R O D U C T
TO QUALIFIED SERVICE
VOLTAGE" INSIDE
PERSONNEL.
TONE/PULSE DIALING
This adjustment allows you to select tone (touch-tone) or
pulse (rotary) mode dialing. The phone is automatically set
for touch-tone use.
THE PRODUCT.
NOTE: Check with your local phone company
regarding name service availability.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
MEMORY
4. After charging, connect the telephone line cord to the
wall jack.
Store up to ten 24-digit numbers in memory for quick
dialing. This memory feature is in addition to the 40 Caller
ID records that can be stored in the Caller ID memory log.
5. Set the RINGER switch on the handset to ON.
BEFORE YOU BEGIN
REDIAL
button
CALL
Number of calls
Time
Date
NOTE : The phone automatically defaults to touch-
tone dialing. To change to pulse (rotary) dialing, see
“Tone/Pulse Dialing”. If you don’t know which type of
service you have, check with the phone company.
TONE
1. Make sure the phone is OFF.
PARTS CHECKLIST
VOLUME
BACK
We bring good things to life.
STORING A NUMBER IN MEMORY
2. Press and hold the CHANNEL button for 2 seconds until
the phone beeps.
button
button
CALL
NEW
REPT MEMO
REDIAL
CALL BACK
1
VOLUME
A.M.
#
Make sure your package includes the items shown here.
8/11
10:51
25
1. Make sure the phone is OFF.
TALK
DELETE
DELETE
button
2. Press the MEMORY button.
3. Press TONE*
ABC
DEF
2
3
TALK
button
IMPORTANT INFORMATION
3175554231
SMITH JOHN
WALL MOUNT INSTALLATION
3. Press the memory location number (0-9).
4. Press MEMORY again. The display shows ENTER NAME.
GHI
JKL
MNO
PULSE
CHARGE/
IN USE
4
5
6
NOTICE: The Industry Canada label identifies certified equipment. This
certification means that the equipment meets certain telecommunications
network protective, operational and safety requirements. The Industry Canada
does not guarantee the equipment will operate to the user’s satisfaction.
PA
G
E
/
F
I
N
D
Because it is necessary to charge the handset for 12 hours
prior to connecting the phone for use the first time, it is
better to leave the unit on a flat surface during initial
charge before attempting to hang it on the wall.
1. Make sure the phone is OFF.
PQRS
TUV
WXYZ
9
7
8
TONE
button
2. Press and hold the CHANNEL button for 2 seconds until
the phone beeps.
NOTE: If you don't want to enter the name, skip step 5.
TONE
OPER
0
Caller ID phone number
#
Before installing this equipment, users should ensure that it is permissible to
be connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection.
The customer should be aware that compliance with the above conditions
may not prevent degradation of service in some situations.
REDIAL
CALL BACK
1
VOLUME
DELETE
Caller ID name
TALK
CHANNEL FORMAT MEMORY FLASH
ABC
JKL
DEF
2
5
8
0
3
3. Press #.
5. Use the keypad to store a name (up to 15 characters).
More than one letter or character is stored in each of the
number keys. For example, to enter Joe Smith, press 5
for J; press 6 three times for O; press 3 two times for E;
press 1 to enter a space before you start entering the
last name; press 7 four times for S; press 6 for M; press
4 three times for I; press 8 for T; and 4 two times for H.
GHI
MNO
4
6
CHANNEL
button
FLASH
button
PQRS
TUV
WXYZ
7
9
ON
RINGER
OFF
TONE
OPER
#
CHANNEL FORMAT MEMORY FLASH
Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs or alterations
made by the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the
equipment.
VOLUME
OFF
ON
RINGER
REVIEWING MESSAGES
The VOLUME button controls the volume of the handset's
earpiece.
RINGER
switch
As calls are received and stored, the display is updated to
let you know how many calls have been received.
1
Base
Mounting bracket
Handset
3
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic water
pipe systems, if present, are connected together. This precaution may be
particularly important in rural areas.
FORMAT
button
MEMORY
button
•
Press the arrow down (*) button to scroll through the
call records from the most recent to the oldest.
MODULAR JACK REQUIREMENTS
If you're using two letters consecutively that are stored
in the same number key, you must press FORMAT
between the letters. For example, if you enter Barb,
press 2 two times for B; press FORMAT; press 2 for A; 7
three times for R; and 2 two times for B. You need to
press FORMAT between the B and the A since they are
stored within the same number key.
VOICE MESSAGING
CAUTION: Users should not attempt to make such connections themselves,
but should contact the appropriate electric inspection authority, or electrician,
as appropriate.
You need an RJ11 (CA11A) type modular
jack, which is the most common type of
phone jack and might look like the one
pictured here. If you don’t have a modular
jack, call your local phone company to find
out how to get one installed.
Provided your phone
•
Press the arrow up (#) button to scroll through the call
records from the oldest to the newest.
2
CHARGE/IN USE indicator
RECEIVING A CALL
company offers voice
messaging service and
NOTES: This equipment may not be used on coin service provided by the
1. Check the display to see who is calling.
2. Press the TALK button.
telephone company.
you subscribe to it, the
CHARGE/IN USE
CHARGE/
IN USE
DELETING RECORDS
PAGE/
FIND
Party lines are subject to telephone company tariffs and, therefore, you may
not be able to use your own telephone equipment if you are on a party line.
1. Place the handset in the base.
indicator on the base
flashes when the
Use the DELETE button to erase the record currently
shown in the display or all records.
Check with your local telephone company.
6. Press MEMORY. The display shows ENTER TEL NUMBER.
2. Plug the power supply into an AC outlet.
INSTALLATION NOTE: Some cordless telephones
operate at frequencies that may cause interference to
nearby TVs and VCRs. To minimize or prevent such
interference, the base of the cordless telephone
should not be placed near or on top of a TV or VCR. If
such interference continues, move the cordless
telephone farther away from the TV or VCR.
MAKING A CALL
To make a call, press the TALK button before you dial and
press it again to hang up.
phone is not in use to
indicate there is a
message waiting. It
stops flashing after the
message has been
reviewed.
7. Use the keypad to enter the number you want to store
(up to 24 digits). To add a pause, See “Inserting a Pause
in the Dialing Sequence”.
The CHARGE/IN USE indicator comes on indicating that
the battery is charging.
INTERFERENCE INFORMATION
DELETING THE CURRENT RECORD
1. Make sure the phone is OFF.
This equipment generates and uses radio frequency energy which may
interfere with residential radio and television reception if not properly
installed and used in accordance with instructions contained in this manual.
Reasonable protection against such interference is ensured, although there is
no guarantee this will not occur in a given installation. If interference is
suspected and verified by switching this equipment on and off, the user is
encouraged to try to correct the interference by one or more of the following
measures: Reorient the radio/television receiver’s antenna, relocate the
equipment with respect to the receiver, plug the equipment and receiver into
separate circuit outlets. The user may also wish to consult a qualified radio/
television technician for additional suggestions. This equipment has been
fully tested and complies with all limits for Class B computing devices
pursuant to part 15 FCC Rules and Regulations. This device complies with
RSS-210 of Industry Canada. Operation is subject to the following two
conditions: (1) This device may not cause interference, and (2) This device
must accept any interference, including interference that may cause
undesired operation of the device.
Allow the phone to charge for 12 hours before
using the first time. If you don't charge the
phone properly (for 12 hours) when you first set
up the phone, performance of the battery will be
compromised.
8. Press MEMORY again to store the number.
2. Press DELETE. The display shows ERASE CALL ID?
REDIAL
9. Record whose number is stored in the location on the
memory label provided. You will also be able to view
the name and number in the display.
3. Press DELETE again to erase the record.
Press the REDIAL button to redial the last number you
dialed, (up to 32 digits).
DELETING ALL RECORDS
DIGITAL SECURITY SYSTEM
3. Set the RINGER switch on the handset to ON.
1. Make sure the phone is OFF.
FLASH
Your cordless phone uses a digital security system to
provide protection against false ringing, unauthorized
access, and charges to your phone line.
2. Press and hold DELETE. The display shows ERASE ALL?
3. Press DELETE again to erase all records.
Use the FLASH button to activate custom calling services
such as call waiting or call transfer, which
are available through your local phone company.
When you place the handset in the base, the unit verifies
its security code. After a power outage or battery
replacement, you should place the handset in the base for
about 20 seconds to reset the code.
TIP: Don’t use the TALK button to activate custom
calling services such as call waiting, or you’ll hang up
the phone.
ATLINKS Communications Canada, Inc.
(An Alcatel/Thomson Multimedia Joint Venture)
© 2000 ATLINKS Communications Canada, Inc.
Trademark(s) ® Registered
Model 26730D
15575670 (Rev. 1 CAN E)
00-33
Marque(s) ® déposée(s)
Printed in China
|