Enter all or part of the search term.
Suggested search terms appear below the search bar.
Select an option:
Select an option:
3
4
4
•
•
•
•
•
•
To view trucking alerts, select
.
To zoom in or out, select
or
.
•
•
•
•
To search for a type of business, enter a category name
(for example, "movie theaters").
To rotate the map view, select
.
To switch between North Up and 3-D views, select
To add or remove map layers, select
To view specific categories when not navigating a route,
select
To center the map on your current location, select
.
To search for a business name, enter all or part of the
name.
.
To search for an address near you, enter the street
number and street name.
.
•
•
.
To search for an address in another city, enter the street
number, street name, city, and state.
To view shortcuts for map and navigation features, select
.
•
•
To search for a city, enter the city and state.
To search for coordinates, enter latitude and longitude
coordinates.
About Hours of Service
NOTICE
Select an option:
5
6
Although this device is enabled to record hours-of-service
information, this device is NOT an approved substitute for paper
logbook recording requirements under Federal Motor Carrier
Safety Administration regulations. Drivers should comply with all
applicable federal and state paper logbook requirements.
•
To search using a suggested search term, select the
term.
•
To search using the text you entered, select
.
If necessary, select a location.
Finding Trucking Points of Interest
NOTE: This feature is not available in all areas.
The detailed maps loaded in your device contain trucking points
of interest, such as truck stops, rest areas, and weigh stations.
Before you can use Hours of Service, you must be in Truck
mode, and you must create a driver profile (page 3).
Select Where To? > Trucking.
You can use Hours of Service to record your working hours,
which may help you comply with safety regulations.
Your Route on the Map
About Drivers
If you work for more than one carrier in a 24-hour period, you
must record each carrier.
NOTICE
The speed limit feature is for information only and does not
replace your responsibility to abide by all posted speed limit
signs and to use safe driving judgment at all times. Garmin will
not be responsible for any traffic fines or citations you receive
for failing to follow all applicable traffic laws and signs.
You must record the time zone of your home terminal even if
you cross other time zones.
Adding Drivers
Select Apps > Hours of Service.
1
2
3
The route is marked with a magenta line. A checkered flag
marks your destination.
Select
.
Follow the on-screen instructions.
As you travel, the device guides you to the destination with
voice prompts, arrows on the map, and directions at the top of
the map. If you depart from the original route, the device
recalculates the route and provides new directions.
Recording Your Duty Status
Select Apps > Hours of Service.
1
2
3
4
Select a driver.
An icon displaying the current speed limit may appear as you
travel on major roadways.
Select Duty Status.
Select an option:
Truck speed limits may appear when you are driving in Truck
mode based on truck configuration data and applicable laws for
the state or province.
•
•
Select Off Duty to record the time you are off duty.
Select Sleeper to record the time you are resting in a
sleeper berth.
When you are driving in Truck or RV mode, a tone may sound
and
may appear, indicating that truck suitability for this
•
•
•
Select Driving to record the time you are driving a
commercial motor vehicle in operation.
roadway is unknown. Always obey posted signs and
regulations.
Select On Duty to record the time you are on duty, but
not driving a commercial motor vehicle.
NOTE: Truck speed limits are not available for all areas.
Select to record the time a second driver is in the
passenger seat but is not on duty.
NOTE: A driver can be in passenger seat status for up to
two hours immediately after or before eight consecutive
hours in the sleeper berth.
Select Save.
5
Using Driving Logs
Select Apps > Hours of Service.
1
2
3
4
Select a driver.
Using the Navigation Map
Select View Log.
From the main menu, select View Map.
1
Select an option:
If the zoom controls are hidden, select the map to display the
zoom controls.
2
•
To view a different date, select the date at the top of the
screen.
Select the map.
3
3
