Telewizor LED LCD HD
LED40-H9825M
Instrukcja obsługi
Polski
LED LCD HD Fernseher
Bedienungsanleitung
Deutsch
Magyar
LED LCD HD tévé
Használati Utasítás
Televizor LED LCD HD
Manualul utilizatorului
Român
LED LCD HD televizor
Uživatelská příručka
Čeština
LED LCD HD televízia
Príručka používateľa
Slovenčina
Français
Eesti keel
Latviešu
Lietuviškai
English
Téléviseur LED LCD HD
Manuel du propriétaire
LED LCD HD teler
Kasutusjuhend
LED LCD HD televizors
Lietotāja rokasgrāmata
LED LCD HD televizorius
Instrukcija
LED LCD HD Television
Owner’s Manual
Светодиодный ЖК телевизор HD
Руководство для пользователя
Русский
Бъларскиг
Українська
LED LCD HD телевизия
Упътване на потребителя
HD РК-телевізор зі світодіодним
Інструкція для власника пристрою
INTRODUCTION
Contents
PRECAUTIONS ......................................................................2
INTRODUCTION..................................................................3
Supplied Accessories................................................................................4
Symbols Used in this Manual...............................................................4
Attaching the Base.....................................................................................4
Adjusting the Swivel Angles..................................................................4
Installing the Batteries...............................................................................4
Remote Control..........................................................................................4
Your TV...........................................................................................................5
PREPARATION FOR USE....................................................6
Antenna Connection................................................................................6
External Connection.................................................................................6
Plug In the AC Power Cord.................................................................7
Initial Setup.....................................................................................................7
OPERATIONS.........................................................................8
Watching a TV Programme..................................................................8
Channel List...................................................................................................8
Sleep Timer....................................................................................................8
ECO Mode.....................................................................................................8
Sound Select..................................................................................................8
TV Screen Information............................................................................9
EPG (Electronic Programme Guide)...............................................9
Switching the Input Mode......................................................................9
Photo / Music / Video Playback.......................................................10
Changing the TV Screen Display Mode .....................................14
OTHER SETTINGS ............................................................. 15
Picture Adjustment.................................................................................15
Advanced Picture Adjustment.........................................................15
PC Settings..................................................................................................16
Sound Adjustment..................................................................................16
TV Settings..................................................................................................17
Channel Settings.......................................................................................17
Setup Adjustment....................................................................................19
Subtitle Settings........................................................................................19
Teletext.........................................................................................................20
Common Interface (CI).......................................................................20
DivX® VOD..............................................................................................20
Software Download...............................................................................21
Demo.............................................................................................................21
Reset Default .............................................................................................21
Parental Lock..............................................................................................21
fun-Link..........................................................................................................22
TROUBLESHOOTING GUIDE........................................ 23
OTHER INFORMATIONS................................................ 24
Specifications..............................................................................................24
Trademark Information........................................................................24
Declaration of Conformity.................................................................25
Servicing........................................................................................................25
Cabinet Cleaning......................................................................................25
Panel Cleaning...........................................................................................25
License...........................................................................................................25
Pb, Hg, Cd
License Statement.............................................. end of book
3
EN
Supplied Accessories
• Remote Control
Adjusting the Swivel Angles
You can adjust the viewing angle of your TV.
• Batteries (R03 / AAA, 1.5 V x 2)
• Owner's Manual
• Screw kit for attaching the base
• AC power cord
Top of the unit
approx.
15°
approx.
15°
approx.
15°
approx.
15°
Symbols Used in this Manual
The followings are the description for the symbols used in
this manual.
• While adjusting the swivel angle of your TV, hold the base firmly
to prevent the TV from tipping over and falling down.
If neither symbol appears, the operation is applicable to
both.
Installing the Batteries
Install the batteries (R03 / AAA, 1.5 V x 2) matching the
polarity indicated inside battery compartment of the
remote control.
DTV
ATV
Digital TV operation
Analogue TV operation
Attaching the Base
You must attach the base to the unit to have it as a table
top unit. Be sure the front and rear of the base match the
proper direction.
• When attaching the base, ensure that all screws are tightly
fastened. If the base is not properly attached, it could cause the
unit to fall, resulting in injuries as well as damage to the unit.
• Make sure the table is in a stable location.
Remote Control
1
2
15
16
17
1
Insert the main unit into metal neck of the base.
Make sure not to put the AC power cord between
the base and the unit.
At least 2 people are required for this step.
3
2
Drive Phillips head screws into the 4 threaded holes
at the rear of this unit until they are tight.
4
5
18
19
6
7
8
9
20
21
10
11
12
To remove the base from this unit
13
14
Unscrew the Phillips head screws on step 2. After the
screws are removed, move the unit up from the base.
Be careful not to drop the unit when you remove it.
22
4
EN
12. RED / GREEN / YELLOW / BLUE (p. 8, 9, 10, 11,
20, 22)
Your TV
26
Uses for EPG / teletext / fun-Link.
23
24
25
26
13.
14.
buttons (p. 22)
Functionally useful for fun-Link.
10
21
(expand) /
(text) /
(subpage) /
(reveal) /
(p. 9)
(hold) /
(index) (p. 20)
15. SOURCE
SOURCE (control panel) works same function as
OK to determine the setting menu.
16. PICTURE MODE (p. 15)
17. SOUND MODE (p. 16)
18. GUIDE (p. 9)
15
8
1
34 33
19. ECO
(p. 8)
20. I (information) (p. 9)
21. PROG. Î / ï (control panel) /
29
31
28
32
J / K (remote control) (p. 8)
PROG. Î / ï (control panel) works same function
as Î / ï (cursor) on the menu.
30
27
22.
(subtitle) (p. 19)
Terminals
23. PC (VGA) Input jack (p. 7)
24. USB terminal (p. 10)
• Data input from USB flash memory only.
• User should not connect any devices to the USB terminal such
as digital camera, keyboard, mouse, etc. (because these will not
work.)
• The software update is, in most cases, handled by an authorized
service person or in some circumstances the user may be asked
to do the software update themselves.
35 36 37
Q (power) (p. 6, 7)
25. CI slot (p. 20)
26. HDMI (HDMI 1 / HDMI 2 / HDMI 3) Input jack
(p. 6)
1.
Turns the unit on and go into the standby mode.
SLEEP (p. 8)
27. Headphone Audio Output jack
2.
3.
28.
(aerial) Input jack (p. 6)
Number buttons (p. 8)
Selects the desired channel in TV mode and enters
the password in the PIN code input field.
29. Audio Input jack for PC connection (p. 7)
30. Coaxial Digital Audio Output jack (p. 6)
31. Component Video, Composite Video and Audio
(L/R) Input jacks (p. 6)
4.
5.
ASPECT
(p. 14)
BACK (p. 8)
32. SCART jack (p. 6)
Returns to the previous display.
Î / ï / Í / Æ (cursor) (p. 7)
OK
• The Audio (L) jack is for monaural input. The sound is heard
from both speakers. Use this jack for a monaural audio devices.
6.
7.
33. AC power cord Inlet
34. Main power switch
8.
MENU (control panel) / MENU (remote
control) (p. 15)
Turns this unit's main power on and off.
35. Illuminance sensor window
Alter the brightness of the TV screen automatically
by detecting your room lighting level. Do not block
anything in front of its window to work properly.
36. Standby / Power indicator
Lights up red when the unit goes into standby
mode.
9.
AUDIO (p. 8)
10. VOL. X / Y (control panel) /
+/– (remote control) (p. 8)
VOL. X works same function as Æ (cursor) and
VOL. Y works same function as Í (cursor) on the
menu.
11.
(mute) (p. 8)
Light off when power is on.
37. Infrared sensor window
Receives the infrared rays transmitted from the
remote control.
5
EN
SCART Connection
PREPARATION FOR USE
Read this first
• No supplied cables are used with these connection. Please
purchase the necessary cables at your local store.
Your device
Your TV
• Illustration in the following connection are example. Read the
manual accompanying your device for more detail.
• Before you connect, be sure your antenna or other device is
connected properly before plugging in the AC power cord.
SCART cable
Output
Input
Antenna Connection
Audio
(L/R)
S-Video
Yes
CVBS RGB Video and Audio (L/R)
UHF
VHF
Outputs the RF input
Yes Yes signal converted as CVBS
signal.
Yes
Your TV
VHF/UHF
MIXER
Component / Composite video Connection
RF cable
1
Connect an RF cable to
rear of this unit.
(aerial) Input jack at the
Your device
Your TV
2
3
4
Plug this unit into an AC outlet.
Turns on the main power switch.
COMPONENT
VIDEO OUT
COMPONENT
/
VIDEO IN
audio
cable
Y
AUDIO
OUT
/
VIDEO
L
AUDIO
R
Pb
When the Standby / Power indicator on the front
panel lights red, then press Q to turn on the unit.
Pr
• If you like to connect an active DVB-T antenna, the antenna
must have its own power supply.
component video cable
• It is not possible to power the antenna from the TV.
• This unit accepts 480i / 480p / 576i / 576p / 720p / 1080i video
signals for component connection.
External Connection
HDMI Connection (HDMI 1 / HDMI 2 / HDMI 3 )
Your device
Your TV
composite video
cable
Your device
Your TV
Y
HDMI cable
/
VIDEO
L
AUDIO
R
Pb
Pr
• This unit accepts 480i / 480p / 576i / 576p / 720p / 1080i /
1080p video signals and 32 kHz / 44.1 kHz / 48 kHz only 2
channel audio signals (LPCM).
• You need to select “PCM” for the digital audio output of the
device you connect. Make sure the device outputs the digital
audio. Audio sometimes makes no sound if you select
“Bitstream”, etc.
audio cable
• Make sure the rest of Component Video jacks (Pb/Pr) are
unplugged completely when you plug the Composite Video
jack to Y / VIDEO terminal.
DTV
Audio Output connection
For digital broadcasting only
Dear Customer,
digital audio
coaxial cable
By connecting an HDMI cable to your Funai LCD TV,
you have to use only a certified HDMI cable to guarantee
a sufficient immunity against parasitic frequency radiation.
A certified HDMI cable can be identified by the HDMI
logo on the cable or the cable package.
DIGITAL
AUDIO
COAXIAL IN
DIGITAL
AUDIO
OUT
COAXIAL
Your device
Your TV
6
EN
PC Connection
Initial Setup
This section will guide you through the unit's initial setting
which includes selecting a language for your on-screen
menu and auto scan, which automatically scans and
memorises viewable channels.
VGA cable with
ferrite core
1
After making all the necessary connections, turns on
the unit using the main power switch, then press Q.
RGB
PC-IN
2
Use Î / ï repeatedly to select the menu language,
then press OK.
PC-IN
AUDIO
AUDIO
LINE OUT
Your device
Your TV
Initial Setup
Language
Български
Please select your language.
Česky
Dansk
Deutsch
Eesti
Mini-plug audio cable
Ελληνικά
English
The following signals can be displayed.
Format
VGA
Resolution
640 x 480
Refresh rate
Select
Exit
SVGA
800 x 600
3
Use Î / ï to select the location, then press OK.
XGA
1,024 x 768
1,360 x 768
1,440 x 900
1,280 x 1,024
1,400 x 1,050
1,680 x 1,050
1,920 x 1,080
WXGA
WXGA+
SXGA
• Select [at Home], this unit is set to maximise the energy
efficiency for home setting and it can be adjusted through a
choice of picture and sound quality according to your
preference.
• Select [Retailstore], this unit will be set up with predefined
setting for retail displays. If you select [Retailstore], the settings
of picture and sound quality you adjusted will not be
memorised after the unit goes to the standby mode.
• When “Initial Setup” (p. 7) is completed, you cannot change the
location setting unless you restore this unit to “Factory Reset”
(p. 22) and that restarts all over again such as channel scanning.
60 Hz
SXGA+
WSXGA+
HDTV
• Other formats or non-standard signals will not be displayed
correctly.
• Please use the VGA cable that has a ferrite core.
4
Use Î / ï repeatedly to select the country, then
press OK.
Plug In the AC Power Cord
Make sure that the AC power cord must be plugged to an
AC outlet after all the necessary connections are
completed.
• Scan confirmation menu will appear.
• You can also set regions at “Region” (p. 19), when you select
[Spain] or [Portugal].
5
When below display appear, then use Î / ï to
select [Scan] and press OK to start scanning.
AC outlet
Your TV
Initial Setup
Auto Scan
Auto Scan
First, please connect antenna.
Start channel scan now?
Scan
Skip
If you skip this step, the channel
scan could be performed in Menu.
Back
Select
OK
Exit
• If you press MENU during channel scanning, this operation will
be paused, then press MENU again to exit the initial setup.
7
EN
Sleep Timer
OPERATIONS
The sleep timer can be set the unit to go to the standby
mode after an incremental period of time.
Read this first
1
Press SLEEP repeatedly to change the sleep time
period.
These operations are accessible by remote control. Some
may also be accessible by controls on the main unit.
• Each time you press SLEEP, the timer increases from
10 minutes up to 120 minutes.
• Press SLEEP repeatedly until [Off] appears to cancel the sleep
Watching a TV Programme
To select a channel
timer.
• If the unit goes into standby mode, the sleep timer will be
cancelled.
Use J / K repeatedly to select your desired channel,
or use the Number buttons to enter a channel number,
then press OK for quicker access.
(e.g.) If you want to select the channel 24 without pressing
OK, press 2 first, then press 4 within 3 seconds.
ECO Mode
When you set [ECO Mode] to [On], backlight brightness
will be reduced automatically which may save on power
consumption.
To adjust the volume
Press ECO
repeatedly to select [On] or [Off].
Use
+/– to adjust the audio volume.
On The illuminance sensor senses the brightness of
the environment and, darkens the backlight
automatically when the room gets dark.
Press
to turn on or off the sound right away.
• You can recover the original volume by pressing
again or
+/–.
Off The illuminance sensor is not effect, and the
backlight level gets back the value you adjusted.
Channel List
You can easily find a channel you want.
Sound Select
1
2
Press OK while watching a programme.
DTV
Use Î / ï to select the channel you want to watch,
then press OK.
Press AUDIO to display currently selected audio language
with the number of available ones and press repeatedly to
cycle through them.
Channel List
• The display image can be found on the “TV Screen Information”
(p. 9).
Dolby Digital sound
Dolby Digital Plus sound
HE-AAC sound
no icon
MPEG sound
Prev Page
Next Page
ATV
1
Radio Channel
Press AUDIO to display currently selected audio mode
and press repeatedly to cycle through the available audio
mode.
(e.g.)
2
Analogue Channel
• Use RED / GREEN to move to the previous or next page.
Nicam Stereo
Mono
3
Press BACK to exit.
Nicam
Dual1
Nicam
Dual2
Mono
• You can edit the channel list at “Channel Settings” (p. 17).
Nicam Mono
Mono
Stereo
Dual1
Mono
Dual2
Mono
8
EN
TV Screen Information
EPG (Electronic Programme Guide)
You can see the broadcasting information.
DTV
1
Press I to display fewer information and press again
more information will appear.
You can easily find a channel or see the detailed channel
information. EPG gives you scheduled information of the
TV programmes.
1
Press GUIDE and use Î / ï to select a channel.
Programme Guide
Viewing date: Tue
English
Dual 1
English
Feb
Current time:Tue
Feb
1
2
Channel name
Present programme name / Use Í / Æ to switch the present
time
and next programme. (if
available)
Music
3
4
5
6
7
8
Current time
Channel number
Resolution / Format / TV aspect ratio
Audio language (DTV) / Audio Mode (ATV)
Audio mode (DTV)
Prev Page
Next Page
• Press RED or GREEN to move the channel list to the
previous or next page.
• Press OK to watch the selected channel.
Subtitle (p. 19)
is displayed if the subtitle of
the TV programme is available.
2
Press Æ (cursor), then use Î / ï to select a
programme.
is displayed if the subtitle of
the TV programme is for hearing
impaired.
• Press RED or GREEN to move the programme list to the
previous or next day.
9
Programme information When the programme
• Press OK to watch the selected programme if it is
currently available.
information consists of more
than 3 lines, use Î / ï to scroll.
3
4
Press YELLOW to display more detailed
programme information.
10 Audio Description (p. 17)
is displayed when the TV
programme provides additional
audio description for visually
impaired.
• When the programme information consists of more than
2 pages, use RED or GREEN to move to the previous or
next page.
11 Teletext (p. 20)
is displayed if the teletext of
TV programme is available.
Press GUIDE to exit.
12 Scrambled programme
is displayed, when you are
watching the scrambled
programme.
Switching the Input Mode
You can switch the input mode to
TV mode or external input mode.
13 Parental rating (p. 21)
14 Lock status (p. 21)
Select Input
TV
is displayed if the parental
rating of TV programme is
available.
* The icon may differ depending
on the ratings.
SCART
VIDEO
HDMI 1
HDMI 2
HDMI 3
PC
1
2
Press SOURCE
.
Use Î / ï to select the input
mode you want, then press
OK.
is displayed when you are
watching the TV programme
which you set the parental lock
or channel lock.
USB
15 ATV broadcast
DTV broadcast
Radio service
• [COMPONENT] will be displayed if you connected
component video cables to this unit.
is displayed when it receives
analogue TV broadcast.
is displayed when it receives
digital TV broadcast.
is displayed when it receives
digital audio broadcast.
2
Press BACK to exit.
9
EN
Photo
Photo / Music / Video Playback
This unit can play JPEG picture and MP3 / WAVE music
and DivX® video files. Use the USB flash memory contains
those files.
Photo
Before you begin: You must insert the USB flash memory to
USB terminal of this unit (shown below) and select [USB] at
[Select Input]. Refer to “Switching the Input Mode” (p. 9).
Sort
Media Type
Thumbnail Size
Display all files
Your TV
• The USB flash memory is not supplied with this unit.
• The unit recognise a USB flash memory only.
Do not use a USB hub and an extension cord between the USB
flash memory and the unit.
Select
Menu
Play/Enter
Back
• The sort order: [Date] or [Name].
Always insert the USB flash memory to this unit directly.
• We do not guarantee the all USB flash memory can be
supported on this unit.
Operation in Slideshow
B (PLAY) / F
1
2
3
4
Press SOURCE
and use Î / ï to select [USB], and then press OK.
to appear the select input mode
Press to play or pause the slideshow.
J / K
Use Í / Æ to select [Photo], [Music] or [Video],
and then press OK.
Press J to skip forward the file.
Press K to skip backward the file.
BACK
Press GUIDE to toggle between the play list and the
thumbnail to select the desired display method.
In the play list, use Î / ï to select the desired file,
then press OK or Æ (cursor).
In the thumbnail, use Î / ï / Í / Æ to select the
desired file, then press OK.
Press to go back to the previous screen.
Show details (I) :
Press MENU and then use Î / ï to select [Show
details], and press OK.
• [Name], [Date], [Resolution], [Size] and [Next].
While the menu is not displayed, the first press I to show
toolbar. The second press I to show details.
The third press I to remove the details.
Operation in List and Thumbnail view
Before adjust each setting, press MENU to display the
menu.
Repeat (RED) :
Sort :
Press MENU and then use Î / ï to select [Repeat], and
press OK, then use Î / ï to select the repeat mode;
none or all repeat, and then press OK.
While the menu is not displayed, press RED to change
the repeat mode in order.
Use Î / ï to select [Sort], and then press OK, then use
Î / ï to select the sort order.
Media Type :
Use Î / ï to select [Media Type], and then press OK,
then use Î / ï to select the media type; [Photo] or
[Music].
Shuffle (BLUE) :
Press MENU and then use Î / ï to select [Shuffle], and
press OK then use Î / ï to select the shuffle mode; on
or off, and then press OK.
While the menu is not displayed, press BLUE to playback
the slideshow randomly. To return to the normal
playback, press BLUE again.
Thumbnail Size :
Use Î / ï to select [Thumbnail Size], and then press
OK, then use Î / ï to select the thumbnail size; [Small],
[Middle] or [Large].
Display all files :
Use Î / ï to select [Display all files], then press OK to
display all files.
• All files may not be displayed even if you select [Display
all files] due to the amount of files / folders, the length
of their file / folder name or the capacities.
When you want to display each folder or file, select
[Display current folder files], and then press OK.
10
EN
Playing Operation
Operation in Playback
Transition (GREEN) :
B (PLAY) / F
Press MENU and then use Î / ï to select [Transition],
and press OK, then use Î / ï to select the way of
transition mode below, and then press OK.
• [None], [Dissolve], [Wipe right], [Wipe left], [Wipe
up], [Wipe down], [Box in], [Box out] and [Random].
While the menu is not displayed, press GREEN
repeatedly to change transition of the slideshow in order.
Press to play or pause the playback.
H / G
Press to skip backward or forward the file.
J / K
J works same function as G.
K works same function as H.
Í / Æ (cursor)
Slide time (YELLOW) :
Press MENU and then use Î / ï to select [Slide time],
and press OK, then use Î / ï to select the display time
below, and then press OK.
While holding Æ, fast-forward the file.
While holding Í, rewind the file.
• [7 seconds], [12 seconds] and [16 seconds].
While the menu is not displayed, press YELLOW to
change the slide time in order.
E / D
Press to rewind or fast-forward the file.
Every press on E / D will rewind or fast-forward
faster up to five.
Pausing Operation
Repeat (GREEN) :
Rotate (GREEN) :
Press MENU and use Î / ï to select [Repeat], then
press OK. Use Î / ï to select the following repeat
mode; [None], [Single] or [All], and press OK.
You can also set those repeat mode or none by pressing
GREEN while the menu is not displayed.
Press MENU and then use Î / ï to select [Rotate], and
then press OK. And then every press on OK will turn the
picture clockwise by 90 degrees.
While the menu is not displayed, every press on GREEN
will turn the picture clockwise by 90 degrees.
Shuffle (YELLOW) :
Zoom (YELLOW) :
Press MENU and use Î / ï to select [Shuffle On] or
[Shuffle Off] then, press OK to determine the shuffle
mode on or off.
You can also set the shuffle mode on or off by pressing
YELLOW while the menu is not displayed.
Press MENU and then use Î / ï to select [Zoom], and
then press OK, then use Î / ï to select the zoom factor:
1x, 2x and 4x, and then press OK.
While the menu is not displayed, press YELLOW to
change the zoom factor in order.
Show details (I) :
Press MENU and use Î / ï to select [Show details],
then press OK.
Music
• [Title], [Artist], [Album], [Genre], [Year], [Duration]
and [Next].
You can also call up or turn off the details by pressing I
while the menu is not displayed.
Title:
Artist:
Album:
Genre:
Year:
Audio only :
Press MENU and use Î / ï to select [Audio only], to be
undisplayed all informations.
Duration:
Next:
• Press any button (except Q) to return the normal
display.
Music
Select
Menu
Play/Pause
Back
• The sort order: [Name], [Genre], [Artist] or [Album].
11
EN
Video
AUDIO
Press to change the audio track.
• This operation is available, if the file contains more than
one audio track.
Title:
Repeat :
Director:
Copyright:
Date:
Press MENU and use Î / ï to select [Repeat], then
press OK. Use Î / ï to select the following repeat
mode; [None], [Single] or [All], and press OK.
Genre:
Duration:
Next:
Show details (I) :
Video
Off
Press MENU and use Î / ï to select [Show details],
then press OK.
Select
Menu
Play/Pause
Back
• [Title], [Director], [Copyright], [Date], [Genre],
[Duration] and [Next].
• The sort order: [Type], [Date] or [Name].
You can also call up or turn off the details by pressing I
while the menu is not displayed.
Operation in Playback
Picture Mode :
B (PLAY) / F
Press MENU and use Î / ï to select [Picture Mode]
then press OK. Use Î / ï to select the following picture
mode, and press OK.
• [Standard], [Dynamic], [Movie] and [Game].
• PICTURE MODE on the remote control does not
work in this mode.
Press to play or pause the playback.
C
Press to stop the playback, and then press B to resume
from the point at which playback was stopped, or press
again to finish the playback.
H / G
Screen Mode :
Press to skip backward or forward the file.
Press MENU and use Î / ï to select [Screen Mode],
then press OK. Use Î / ï to select the following screen
mode; [Normal] or [Dot by Dot], and press OK.
• These screen mode are described as PC input signal at
“Changing the TV Screen Display Mode” (p. 14).
J / K
J works same function as G.
K works same function as H.
E / D
• ASPECT
on the remote control does not work in
this mode.
Press to rewind or fast-forward the file.
Every press on E / D will rewind or fast-forward
faster up to five.
5
Press SOURCE
to exit this mode.
and select input mode you want
(subtitle)
Press to change the subtitle track.
• This operation is available, if the file contains subtitle
track.
12
EN
• Funai can not be held responsible if your USB flash memory is
not supported, nor will Funai accept any liability for damage or
loss of stored data.
It is supported that files to be played back in this unit are
recorded under the following specifications:
• A USB flash memory that required its own driver or the device
with a special system such as fingerprint recognition are not
supported.
<JPEG>
Baseline
17,000 x 10,000
4,000 x 4,000
Progressive
<MP3>
• Be sure to keep a backup copy of the original files on your
device before you play them back on this unit. We have no
responsibilities for damage or loss of your stored data.
• To avoid damaging the USB flash memory and the unit always
turn off the unit before you remove the USB flash memory.
• This unit is not allowed to use the USB flash memory which
requires external power supply (500 mA or more).
• This unit can be recognised up to 3,000 files in the USB flash
memory.
• This unit may not be recognised if the length of the file names
is too long. Only English characters can be recognised.
• This unit does not support MTP(Media Transfer Protocol) or
the file other than FAT, FAT32 and NTFS file system. If the file
is not supported, error message appears.
Sampling frequency
32 kHz, 44.1 kHz or 48 kHz
16 kHz, 22.05 kHz or 24 kHz
8 kHz, 11.025 kHz or 12 kHz
Constant bit rate
<WAVE>
32 kbps - 320 kbps
Sampling frequency
Constant bit rate
32 kHz, 44.1 kHz or 48 kHz
16 bit PCM (big / little endian),
24 bit PCM (big endian)
<DivX®>
Resolution
Up to 1,920 x 1,080
• When the unit does not recognise the USB flash memory, try
reconnecting it.
• When playing back the files recorded in high bit rates, the
images can be interrupted in some occasions.
• The resume information will be kept until finish the playback
definitely.
• This unit does not support external subtitle.
• This unit cannot play back a file which go over the limit of file
restriction.
• This unit can play back the bought-out file with the registration
code of this unit only.
• A DivX® file with an extension of “.avi” and “.divx” is only
supported.
Constant bit rate
16 kbps - 320 kbps
(MPEG audio)
32 kbps - 448 kbps
(AC3 audio)
Sampling frequency
Channel type
16 kHz - 48 kHz
1-channel / mono
2-channel / stereo
6-channel / surround
Internal subtitle type
XSUB, XSUB+
• Although DivX® logo has been obtained for this unit, it may
not be able to play back some data, depending on the
characteristics, bit rates, or audio format settings, etc.
• If a large-sized DivX® file is selected, it may take a while to start
the playback (over 20 seconds sometimes).
• For more information for DivX®, please visit
• ABOUT DIVX VIDEO: DivX® is a digital video format created
by DivX, LLC. This is an official DivX Certified® device that
plays DivX video. Visit divx.com for more information and
software tools to convert your files into DivX video.
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified®
device must be registered in order to play purchased DivX
Video on-Demand (VOD) movies. To obtain your registration
code, locate the DivX VOD section in your device setup menu.
Go to vod.divx.com for more information on how to complete
your registration.
• Official DivX® Certified product; Plays only DivX® 3, 4, 5 and
6 versions with standard playback of DivX® media files.
• USB flash memory containing the DivX® files with the DivX®
GMC (Global Motion Compensation) playback feature, which
is DivX® supplemental function, cannot be played back on this
unit.
13
EN
Changing the TV Screen Display Mode
You can select your favourite TV screen size. Press ASPECT
repeatedly to switch the TV screen display mode.
For 16:9 video signal
[Auto]
[4:3]
Selects the TV screen display mode automatically.
Displays a 16:9 picture at a 4:3 size; the picture is shortened
horizontally. Sidebars appear on both edge of the TV screen.
Displays a 16:9 picture that is stretched horizontally and
vertically.
[Full]
Auto
Full
4:3
[Zoom]
[Cinema]
[Expand]
[Unscaled]
Displays a 16:9 picture at its enlarged size without changing its
horizontal and vertical ratio.
Displays a 16:9 picture that is vertically stretched. This only
crops out the top of the picture.
Displays a horizontally stretched picture. This crops out the left
and right sides of the picture.
Displays a 16:9 picture at its original size.
Zoom
• You can set [Unscaled] in HD picture mode. (720p / 1080i / 1080p)
Cinema
Expand
Unscaled
For 4:3 video signal
[Auto]
[4:3]
Selects the TV screen display mode automatically.
Displays a 4:3 picture at its original size. Sidebars appear on both
edge of the TV screen.
[14:9]
Displays a 4:3 picture at a 14:9 size. Sidebars appear on both
edge of the TV screen. This crops out the top and bottom of
the picture.
Displays a 4:3 picture at a 16:9 size; the picture is stretched
horizontally to fill the TV screen.
Displays a 4:3 picture at a 16:9 size; at its enlarged size without
changing its horizontal and vertical ratio. This crops out the top
and bottom of the picture.
Auto
14:9
4:3
[Full]
Full
[Zoom]
[Cinema]
[Wide]
Displays a 4:3 picture at a 16:9 size; the picture is stretched
more vertically at the top of the TV screen. This crops out the
top of the picture.
Displays the picture with its centre at the original size and the
edges stretched horizontally to fill the screen.
Zoom
Wide
Cinema
For PC input signal
[Normal]
[Full]
Displays a proportionally stretched picture. Mainly sidebars
appear on both edges of the TV screen.
Displays the picture with its centre at the original size and the
edges stretched horizontally to fill the screen.
Displays a picture at its original size.
Normal
Full
[Dot by Dot]
Dot by Dot
14
EN
Colour Temperature
OTHER SETTINGS
You can change the colour tone of the picture.
Read this first
2
Use Î / ï to select [Colour Temperature] and
then select [Warm], [Normal] or [Cool] using Í /
Æ.
Before adjust each setting, press MENU to display the
menu.
To exit the menu, press MENU.
Press MENU and no input for 1 minute, then the menu
disappears automatically.
Advanced Picture Adjustment
You can adjust the detailed picture settings according to
your personal preference.
Picture Adjustment
1
2
Use Î / ï to select [Picture], then press OK.
You can adjust the picture settings according to your
personal preference. These settings are automatically
stored after exiting the picture menu.
Use Î / ï to select [Features], then press OK.
DNR
Mid
Mid
On
Picture
Sound
TV
1
Use Î / ï to select [Picture], then press OK.
CTI
Flesh Tone
Adaptive Luma Control
Backlight
On
Picture Mode
Dynamic
Picture
Sound
TV
Brightness
Contrast
Colour
Others
Parental
Hue
Sharpness
100Hz
Others
On
Colour Temperature
Features
Cool
Features
Select
Back
Parental
DNR (Digital Noise Reduction)
Picture
Select
Back
You can adjust to reduce the appearance of digitizing error
caused by the compression.
Picture Mode
3
Use Î / ï to select [DNR] and then select [Mid],
[High] or [Low] using Í / Æ.
2
Use Î / ï to select [Picture Mode], then select
[Standard], [Dynamic], [Movie], [Game] or
[Personal] using Í / Æ.
CTI (Colour Transient Intensity)
You can adjust the picture for colour errors.
• You can change picture mode easily using PICTURE MODE.
Press PICTURE MODE repeatedly to select picture mode you
want. In this function, you can set also assign the picture mode
individually to each input mode.
3
Use Î / ï to select [CTI] and then select [Mid],
[High] or [Low] using Í / Æ.
Flesh Tone
Brightness / Contrast / Colour / Hue / Sharpness
You can set to activate the flesh colour or not.
2
Use Î / ï to select the item you want, and then or
after Press OK to appear the setting display, adjust
the setting using Í / Æ.
3
Use Î / ï to select [Flesh Tone] and then select
[On] or [Off] using Í / Æ.
Adaptive Luma Control
• If you adjust the settings in other than [Personal] mode,
You can adjust changes in the luminance of the picture.
[Picture Mode] will be changed to [Personal].
3
Use Î / ï to select [Adaptive Luma Control] and
then select [On] or [Off] using Í / Æ.
100Hz
When the picture is blurred while viewing fast moving
scenes may be corrected using the 100Hz (100 frames per
second) resolution feature.
Backlight
You can adjust backlight brightness.
3
2
Use Î / ï to select [100Hz] and then select [On]
or [Off] using Í / Æ.
Use Î / ï to select [Backlight] and then adjust the
setting using Í / Æ.
• When you set [Game] in [Picture Mode], the function will not
effect.
• After press OK and appear the setting display, you can adjust it.
• When you set [ECO Mode] to [On] at “ECO Mode” (p. 8),
this function will not work even if you adjust the setting due to
the ECO Mode has priority.
15
EN
SRS TruSurround HD
PC Settings
You can adjust the PC screen position, clock and phase.
Before you begin: You must connect your PC to this unit
and select [PC] at [Select Input].
You can set to the sound modes for more spatial or
surround sound reproduction.
2
Use Î / ï to select [SRS TruSurround HD] and
then select [On] or [Off] using Í / Æ.
Refer to “Switching the Input Mode” (p. 9).
1
2
Use Î / ï to select [Picture], then press OK.
Sound Mode
Use Î / ï to select [PC Settings], then press OK.
2
Use Î / ï to select [Sound Mode] and then select
[Standard], [Movie], [Music] or [Game] using Í / Æ.
Auto Adjustment
Horizontal Position
Vertical Position
Phase
Picture
Sound
• You can change sound mode easily using SOUND MODE.
• Press SOUND MODE repeatedly to select sound mode you
want.
Others
Clock
Parental
Digital Audio Output
2
Use Î / ï to select [Digital Audio Output] and
then select [Auto] or [PCM] using Í / Æ.
PC Settings
OK
Select
Back
Auto
PCM
Dolby Digital (if available)
PCM
Auto Adjustment
3
Use Î / ï to select [Auto Adjustment], then press
OK.
Auto Volume Control
If set to [On], sudden changes in volume will be reduced
automatically, for example, during commercials or when
switching channels.
• Each setting will be adjusted automatically.
Horizontal Position / Vertical Position / Phase / Clock
2
Use Î / ï to select [Auto Volume Control], and
then select [On] or [Off] using Í / Æ.
3
Use Î / ï to select the item you want, then adjust
the settings according to your personal preference.
• After press OK and appear the settings display, you can adjust
them.
• You can select your favourite PC screen size at “Changing the
TV Screen Display Mode” (p. 14).
TV Speakers
Select the audio output from the unit’s speakers, or not. If
your amplifier is HDMI link function compatible and
connected by an HDMI cable to this unit, some sound
operations such as volume up can be changed by using this
unit’s remote control. Make sure [fun-Link Control] is set
to [On] (p. 22).
Sound Adjustment
You can adjust the sound settings according to your
personal preferences.
1
Use Î / ï to select [Sound], then press OK.
2
Use Î / ï to select [TV Speakers], then select
[On], [Off] or [Ext.Amp] using Í / Æ.
Balance
Picture
Bass
On
Off
The sound will be output from the unit’s
speakers.
Sound
TV
Treble
SRS TruSurround HD
Sound Mode
Off
Standard
The sound will not be output from the unit’s
speakers.
PCM
Digital Audio Output
Auto Volume Control
TV Speakers
Others
Off
On
Ext.Amp You can control audio output from your
connected HDMI link devices by using this
unit’s remote control.
Parental
Audio Type
Audio Description
Sound
Adjust
Select
Back
Balance / Bass / Treble
You can set left / right speaker setting.
2
Use Î / ï to select the item you want, and then
adjust the setting using Í / Æ.
16
EN
Audio Type
Audio Channel
You can adjust the audio type.
ATV
2
Use Î / ï to select [Audio Type], and then select
[-], [Hearing Impaired] or [Visually Impaired] using
Í / Æ.
You can select the audio mode.
2
Use Î / ï to select [Audio Channel], and then
select [Stereo], [Mono], [Dual 1] or [Dual 2] using
Í / Æ.
Hearing Impaired:
Provides audio service for hearing impaired.
Visually Impaired:
• While watching a programme, you can change the audio
language easily using AUDIO when it is available.
Provides additional audio description for visually impaired.
Audio Description
Channel Settings
You can edit the channels.
You can adjust audio output setting and volume for
[Visually Impaired].
1
2
Use Î / ï to select [TV], then press OK.
2
After select [Visually Impaired], use Î / ï to select
[Audio Description], and then select adjust the
setting using Í / Æ.
Use Î / ï to select [Channel], then press OK.
Auto Scan
Picture
Manual Scan (ATV)
Sound
• After OK and appear the mixing level display, you can adjust it.
Manual Scan (DTV)
• Only MPEG sound is available for this function.
Update Scan
TV
Channel Skip
TV Settings
Channel Sort
Others
Channel Edit
You can select the country and audio language.
Channel Decode
Parental
1
Use Î / ï to select [TV], then press OK.
Fine Tune
Country
France
English
English
Picture
Sound
TV
Channel
Search
Select
Back
Main Audio Language
Sub Audio Language
Channel
Auto Scan
You can scan the DTV and ATV channel in your area
automatically.
Others
• When the scanning is completed, the lowest memorised digital
or analogue channel will be displayed.
Parental
• If you press MENU during the scanning, this operation will be
stopped and the lowest memorised channel will be displayed.
• Please note that after tuning, the analogue channels will be
stored in the order that they are broadcast by your local
transmitter. This may not be in the same order in which you
would like them to be stored. If this is the case, you can change
the order according to your preference at “Channel Settings”
(p. 17).
TV
Select
Back
Country
You can set the country you want.
2
Use Î / ï to select [Country], and then select the
country you want using Í / Æ.
3
Use Î / ï to select [Auto Scan] and then press OK
to start scanning.
Main Audio Language / Sub Audio Language
Manual Scan (ATV)
DTV
You can search ATV channel manually in your area.
You can select the main or sub audio language.
3
Use Î / ï to select [Manual Scan (ATV)], then
2
Use Î / ï to select [Main Audio Language] or [Sub
Audio Language], and then select each language you
want using Í / Æ.
press OK.
4
Use Î / ï to select [Start Frequency (MHz)] for
section of the 3-digit frequency using the Number
buttons.
5
Use Î / ï to select [Scan Up] or [Scan Down],
then press OK to start scanning greater than or less
than the adjusted frequency.
17
EN
Manual Scan (DTV)
You can search DTV channel manually in your area.
3
Use Î / ï to select [Manual Scan (DTV)], then
press OK.
4
Use Í / Æ to select [Channel Number], and then
press OK to start scanning.
Update Scan
Search and register unreceived ATV and DTV channels.
ATV
3
Use Î / ï to select [Update Scan], then press OK.
7
8
Use Î / ï to select [Frequency (MHz)] and enter
frequency you want using the Number buttons,
then press OK.
Channel Skip
When using
skipped.
/
, the channel you selected will be
Use Î / ï to select [Colour System] or [Sound
System], and then select the system you want using
Í / Æ.
3
4
Use Î / ï to select [Channel Skip], then press OK.
Use Î / ï to select channel you want, then press
OK.
Channel Decode
•
will appear on the right of the channel.
ATV
• Press OK again to cancel, and
will disappear.
Some TV stations transmit encoded TV signals which can
only be viewed with a purchased or hired decoder. You
can connect such a decoder to SCART jack of the unit.
This function will automatically activate the connected
decoder for the channel.
Channel Sort
3
4
Use Î / ï to select [Channel Sort], then press OK.
Use Î / ï to select channel you want and press OK
to determine, then select another one and press
OK to change the order.
3
Use Î / ï to select [Channel Decode], then press
OK.
4
Use Î / ï to select channel you want, then press
OK.
Channel Edit
You can set the channel number and name.
• Press OK again to cancel, and
will disappear.
3
4
Use Î / ï to select [Channel Edit], then press OK.
Use Î / ï to select channel you want, then press
OK.
Fine Tune
ATV
5
6
Use Î / ï to select [Channel Number] and enter
the number you want using the Number buttons,
then press OK.
3
4
Use Î / ï to select [Fine Tune], then press OK.
Use Î / ï to select the channel you want, then
press OK.
Use Î / ï to select [Name] and enter the character
using the Number buttons, then press OK.
5
Use Í / Æ to adjust the setting you want, then press
OK.
• Using alphabet by the Number buttons, correspondence table
shown below.
• Using Í to erase 1 character.
18
EN
Setup Adjustment
Subtitle Settings
You can change other setting.
You can change the subtitle settings used for TV
programmes.
Menu Language
Picture
English
1
2
Use Î / ï to select [Others], then press OK.
Time Setup
Sound
TV
Subtitle
Use Î / ï to select [Subtitle], then press OK.
Teletext
Common Interface
DivX(R) VOD
Software
Demo
Subtitle (ATV)
Others
3
Use Î / ï to select [Subtitle (ATV)], and then
select [Muting], [On] or [Off] using Í / Æ.
Parental
Reset
Subtitle (ATV)
Picture
Sound
TV
Off
English
English
Others
Select
Back
1st Subtitle Language
2nd Subtitle Language
Subtitle Type
Menu Language
1
2
Use Î / ï to select [Others], then press OK.
Others
Use Î / ï to select [Menu Language], then press
OK.
Parental
Time Setup
Subtitle
Select
Back
1
2
Use Î / ï to select [Others], then press OK.
Use Î / ï to select [Time Setup], then press OK.
1st Subtitle Language / 2nd Subtitle Language
You can set 1st and 2nd subtitle language.
3
Use Î / ï to select [1st Subtitle Language] or [2nd
Subtitle Language], and then select the language you
want using Í / Æ.
Time Zone
You can set the time zone according to the resident area.
3
Use Î / ï to select [Time Zone], and then select
[Auto] or the time you want using Í / Æ.
• While watching a programme, you can change the subtitle
language easily using when it is available.
• To hide the subtitle, select [Off] in [1st Subtitle Language].
Auto : Automatically selects the time zone of your
area to ensure the proper performance of the
time.
Subtitle Type
You can select the preferred subtitle type.
3
Use Î / ï to select [Subtitle Type], and choose [-]
• Although you select [Auto], the correct time may not be
displayed on the “TV Screen Information” (p. 9) depending on
DTV broadcasting.
or [Hearing Impaired] using Í / Æ.
Hearing Impaired : Provides subtitle commentary for
Region
hearing impaired.
In Spain or Portugal, you can select region where you live.
3
Use Î / ï to select [Region], and choose the
region you want using Í / Æ.
Auto Power Off
You can set the unit to go into standby mode automatically
if no activity is detected after the power is turned on for 4
hours.
In spite of this setting, the unit goes into standby mode
automatically if there is no signal input from the antenna
terminal and no user operation for 15 minutes.
3
Use Î / ï to select [Auto Power Off], and then
select [On] or [Off] using Í / Æ.
19
EN
Teletext
Common Interface (CI)
You can change the teletext settings.
DTV
1
2
Use Î / ï to select [Others], then press OK.
This unit is equipped with a CI slot. You can enjoy
additional services with this function, for example Pay TV.
The access restrictions menu will appear on the TV screen
when a CI module is installed.
Use Î / ï to select [Teletext], then press OK.
Teletext Language
Decoding Page Language WEST EUR
Presentation Level Level 2.5
English
Picture
Sound
TV
1
Go into standby mode and unplug from an AC
outlet.
2
Insert the CI module straight to the CI slot of this
unit.
Others
Parental
• Some CI modules may be a two-piece design consisting of a
card reader with the viewing card. When using this kind of card,
insert the card reader firmly into the CI slot on the unit first.
Then, insert the viewing card into the reader.
Teletext
Select
Back
3
Plug this unit into an AC outlet and press Q to turn
on the unit.
Press MENU to display the menu.
Teletext Language
You can select the preferred teletext language.
4
5
6
3
Use Î / ï to select [Teletext Language], then select
the language you want using Í / Æ.
Use Î / ï to select [Others], then press OK.
Use Î / ï to select [Common Interface], then
press OK.
Decoding Page Language
You can switch to the appropriate language group.
7
Follow the instructions on the TV screen.
• You must select [RUSSIA] if you select the countries that use
the Cyrillic alphabet at “Country” (p. 17).
• CI may not available in some countries or region.
• In case of failure, you need to call your CI service provider.
• Menu operations may vary depending on the viewing card.
Refer to the manual accompanying the viewing card.
3
Use Î / ï to select [Decoding Page Language],
then select the language area you want using Í / Æ.
Presentation Level
DivX® VOD
You can adjust the teletext presentation level. Level 2.5
offers more colours and better graphics than Level 1.5.
When you purchase or rent a DivX® file through the
official site of DivX® video which is called DivX® VOD
(Video-On-Demand) services, a registration code is
required every time you get the new file from the DivX®
VOD services.
3
Use Î / ï to select [Presentation Level], then
select [Level 1.5] or [Level 2.5] using Í / Æ.
To show the teletext
1
Press
to turn on the teletext decoder.
1
2
Use Î / ï to select [Others], then press OK.
Use Î / ï to select [DivX(R) VOD], then press
OK.
• [Teletext] information will appear.
2
Press
repeatedly to show the teletext in
transparent mode or picture and teletext mode.
DivX(R) Registration
You can set the registration of DivX® VOD code to this
unit.
• If you want to select other pages, use the Number buttons or
Î / ï.
• To enlarge fonts, press
.
3
Use Î / ï to select [DivX(R) Registration], then
press OK.
• To select the teletext subpages, press
.
• To directly select the page numbers shown at the bottom of
the TV screen, use RED / GREEN / YELLOW / BLUE.
DivX(R) Deactivation
• To call up the hidden information, press
.
• To hold the current page, press
• To go back to the start page, press
• To hide the teletext, press SLEEP.
.
You can deactivate registration code of this unit and get
new registration code and deactivation code in order to
download the DivX® VOD files from the Internet.
.
3
Press BACK to turn off the teletext decoder.
3
Use Î / ï to select [DivX(R) Deactivation], then
press OK and, if a confirmation message appears,
select and press OK.
• During the DivX® playback, you can not enter this setting.
20
EN
Software Download
Reset Default
Reset
Software download complies in specified countries only.
You may not use this function depending on where you
live.
You can restore the all settings except channel setting and
parental lock settings.
1
2
Use Î / ï to select [Others], then press OK.
1
Use Î / ï to select [Others] by pressing OK, and
select [Reset], then press OK.
Use Î / ï to select [Software], then press OK.
Auto Update Search
2
Use Í / Æ to select [OK], then press OK.
When you set to [On], this unit into standby mode detects
and update a new version of software automatically.
Parental Lock
You can proceed Parental setting, if you enter your PIN
code.
3
Use Î / ï to select [Auto Update Search], and
then select [On] or [Off] then using Í / Æ.
1
2
Use Î / ï to select [Parental], then press OK.
• Power indicator lights up while the unit searches or updates the
software.
• Software updating will start automatically.
Use theNumber buttons to enter the 4-digit
PIN Code you set.
Search for new software
• If you have not set up your PIN code, enter 1234.
• When you enter correct PIN Code, settings display will appear
automatically.
You can search for new version of software in TV mode
only.
3
Use Î / ï to select [Search for new software],
Channel Lock
Picture
then press OK.
Maturity Rating
Sound
TV
Change PIN Code
Factory Reset
• When this unit found a new version of software, software
update confirmation menu will appear.
• This process may take up to 60 minutes.
Others
4
After the software update is completed, press Q to
restart this unit.
Parental
Demo
Parental
OK
Select
Back
When you select [Location] to [Retailstore], you can
check and change demonstration settings.
Channel Lock
You can set particular channels to be invisible.
E-pop
E-pop can be set to off or position you want in this
function.
• When you select the locked channel, you need to enter the PIN
Code to watch.
• If you want to unlock the locked channel, select [OK] by using
Î / ï, then the PIN Code again.
1
Use Î / ï to select [Others] by pressing OK, and
select [Demo], then press OK.
3
Use Î / ï to select [Channel Lock], then press
OK.
2
Use Î / ï to select [E-pop], and then select [Top],
[Bottom] or [Off] using Í / Æ.
4
Use Î / ï to select the channel you want, then
press OK.
100Hz Demo
You can check differences of between 50Hz and 100Hz
refresh rate with this demonstration mode.
•
will appear on the right of the channel.
• Press OK again to cancel, and
will disappear.
1
Use Î / ï to select [Others] by pressing OK, and
select [Demo], then press OK.
Maturity Rating
You can set the parental rating to avoid watching an
inappropriate programme for your children.
2
Use Î / ï to select [100Hz Demo], and then press
OK.
3
Use Î / ï to select [Maturity Rating], then press
OK.
4
Use Í / Æ to select the age restriction.
21
EN
Change PIN Code
Auto TV On
You can set your own PIN Code.
This unit will turn on detected when the power on signal
is sent from your connected fun-Link device.
3
Use Î / ï to select [Change PIN Code], then press
OK.
3
Use Î / ï to select [Auto TV On], then select
[On] or [Off] by pressing OK.
4
Use the Number buttons to enter the new 4-digit
number.
On : This unit turns on automatically when you turn on
your connected fun-Link device.
5
Use the Number buttons to enter the same 4-digit
number again.
Off : This unit stays the standby mode even if you turn
on your connected fun-Link device.
Factory Reset
Device Control
You can restore this unit to factory settings.
You can operate some functions such as disc playback or
call up the menu of the connected devices, by using this
unit’s remote control.
3
Use Î / ï to select [Factory Reset], then press
OK.
4
Use Í / Æ to select [OK], then press OK.
3
Use Î / ï to select [Device Control], then select
[On] or [Off] by pressing OK.
• All the settings are restored to the default even memorised
channels, picture settings, and sound settings.
On : B / C / H / G / F / E / D /
/ Î / ï / Í / Æ / OK /
fun-Link
BACK / the Number buttons / RED / GREEN /
YELLOW / BLUE can be used to control your
connected fun-Link devices by this unit’s remote
control.
This function allows you to operate the linked functions
between our brand devices with a fun-Link feature and this
unit connecting through an HDMI cable.
• The set with fun-Link will interoperate without any problems
with other Funai devices which comply with fun-Link.
Off : Disables the device control.
1
2
Press
to display the menu.
Device List Update
Use Î / ï to select [Setup], then press OK.
This function lets you see the product model number or
name of connected devices.
fun-Link Control
3
Use Î / ï to select [Device List Update], then
press OK.
You can set the fun-Link function On or Off.
To show the menu of connected your devices
Make sure [fun-Link Control] and [Device Control] is set
to [On].
3
Use Î / ï to select [fun-Link Control], then select
[On] or [Off] by pressing OK.
On
Off
: Selects if you have connected an external device
that is compatible with the fun-Link function.
1
2
Press
to display the menu.
Use Î / ï to select device you want, then press
OK.
: Disables all fun-Link functions.
• The following additional settings will be greyed out when you
set to [Off].
3
Use Î / ï to select the item you want, then press
OK.
Auto Device Off
Device - Menu
: This function allows you to control
the menu of your connected fun-
Link device.
You can set your device to turn off by interlocking from
this unit’s power.
3
Use Î / ï to select [Auto Device Off], then select
Device -
: This function allows you to control
the top menu of your DVD or Blu-
ray™ discs.
[On] or [Off] by pressing OK.
Contents
On
: Your connected fun-Link device turns off
automatically when the unit goes into the
standby mode.
Device -
Favourite
: This function allows you to control
the pop-up menu of your Blu-ray™
discs.
Off
: Your connected fun-Link device stays on even if
the unit goes into the standby mode.
• Some of fun-Link functions may not be available depending on
your fun-Link devices or discs.
• We do not guarantee 100 % interoperability with other brands
of HDMI link compliant devices.
4
Use Î / ï / Í / Æ / OK on this unit’s remote
control to operate the desired functions for your
devices or discs.
22
EN
TROUBLESHOOTING GUIDE
Sometimes a performance problem can be easily solved by checking seemingly apparent but often
overlooked possibilities.
Before arranging for service, check these items. It could save you time and money.
Possible Remedy
Problem
• Is unit plugged in?
• Power at outlet?
• Check batteries in remote control.
Remote Control Doesn’t Work
• If outside antenna is being used, check for broken wire.
Bars On TV Screen
Picture Distorted
• Check for local interference.
• Try a new channel, if OK, then possibly due to poor channel reception.
• If outside antenna is being used, check for broken wire.
• Surrounding temperature is too low.
• Try a new channel, if OK, then possibly due to poor channel reception.
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possibly due to poor channel reception.
• Is antenna connected to terminal on the back of the unit?
• If outside antenna is being used, check for broken wire.
• Adjust [Colour] control.
Picture Rolls Vertically
No Colour
• Try a new channel, if OK, then possibly due to poor channel reception.
• Is antenna connected to terminal on the back of the unit?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
Poor Reception on Some Channels
• Try a new channel, if OK, then possibly due to poor channel reception.
• Is antenna connected to terminal on the back of the unit?
• If outside antenna is being used, check for broken wire.
• Adjust [Contrast] and [Brightness] control.
Weak Picture
• Surrounding temperature is too low.
• Try a new channel, if OK, then possibly due to poor channel reception.
• If outside antenna is being used, check for broken wire.
• Check for local interference.
Lines or Streaks in Picture
• Try a new channel, if OK, then possibly due to poor channel reception.
• Is antenna connected to terminal on the back of the unit?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possibly due to poor channel reception.
• If outside antenna is being used, check for broken wire.
Ghosts in picture
Picture Blurred
• Try a new channel, if OK, then possibly due to poor channel reception.
• Is antenna connected to terminal on the back of the unit?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
Sound OK, Picture Poor
Picture OK, Sound Poor
• Adjust [Contrast] and [Brightness] control.
• Try a new channel, if OK, then possibly due to poor channel reception.
• Check for local interference.
• Try a new channel, if OK, then possibly due to poor channel reception.
• Is unit plugged in?
• Power at outlet?
• Is unit’s power on?
No Picture or Sound
• Is antenna connected to terminal on the back of the unit?
• If outside antenna is being used, check for broken wire.
• Unplug the AC power cord and wait for about 1 minute, then plug the AC power
cord and turn on the unit again.
• Try a new channel, if OK, then possibly due to poor channel reception.
Different colour marks on TV screen
Black or Luminous point on TV screen
Forget the PIN Code
• It is quality of the LCD Panel.
• Enter 4737, then set your desired password again.
23
EN
OTHER INFORMATIONS
Specifications
Model
LCD
LED40-H9825M
40 inches
Television system
DVB-T(MPEG2/H.264), PAL-B/G, D/K, SECAM-B/G, D/K, L
UHF/VHF 75 ohm
Terminals
Antenna
Audio Input
RCA jack (L/R) x 2
Composite Video Input
RCA jack (shared terminal with Y of components) ×1
Component Video
Input
RCA jack (Y/Pb/Pr) ×3
HDMI Input
PC Input
SCART
HDMI 19pin x 3
D-Sub 15pin x 1 (RGB) / Mini jack Ø3.5 mm x 1 (Audio)
SCART x 1
Headphone Audio
Output
Mini jack Ø3.5 mm x 1
RCA jack × 1
Coaxial digital audio
Output
USB Input
USB × 1
CI Slot × 1
Common Interface
Sound Output
Remote control
10 W, 8 ohm × 2
Digital encoded infrared light system
5 °C to 40 °C
Operating temperature range
Power requirements
AC 220-240 V ~ , 50 Hz
105 W (standby: less than 0.5 W)
Power consumption
Dimensions
*Protruding parts
excluded.
without base
H:577.0 / W:961.0 / D:42.0
H:621.0 / W:961.0 / D:236.0
with base
Weight
without base
with base
13.4 kg
16.1 kg
Trademark Information
• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
• DVB is a registered trademark of the DVB Project.
• The “HD TV 1080p” qualifier Logo is a trademark of
DIGITALEUROPE.
• HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other
countries.
• DivX®, DivX Certified® and associated logos are
trademarks of DivX, LLC. and are used under license.
SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience
from two speakers, complete with rich bass, high frequency detail and clear dialog.
is a trademark of SRS Labs, Inc. TruSurround HD technology is incorporated under
license from SRS Labs, Inc.
“Tuxera NTFS Interoperability”
Used for licensee products which include Tuxera NTFS
24
EN
Declaration of Conformity
This product complies with the requirement of the related
directives.
Servicing
• Should your unit become inoperative, do not try to
correct the problem by yourself. There are no user-
serviceable parts inside. Take the unit to a Service Centre
for servicing.
We: FUNAI ELECTRIC EUROPE Sp. z o.o.
ul. Inżynierska 1, 67-100 Nowa Sól, Poland
declare that the following product:
LCD Television
Cabinet Cleaning
• Wipe the front panel and other exterior surfaces of the
unit with a soft cloth.
Model LED40-H9825M
Trade Name: Funai
• Never use a solvent or alcohol. Do not spray insecticide
liquid near the unit. Such chemicals may cause damage
and discoloration to the exposed surfaces.
is in compliance with the related regulations.
Panel Cleaning
• If the LCD panel should require cleaning, wipe it with a
cotton or soft cloth. Before cleaning the panel,
disconnect the power cord.
License
This product uses some open source software:
• FreeType
• ICU License
“License Statement” is written at the end of book.
If you are interested in obtaining GPL source code used in
this product, please contact FUNAI ELECTRIC EUROPE
Sp. z o.o. ul. Inżynierska 1, 67-100 Nowa Sól, Poland.
Printed in EU
25
EN
License Statement
FreeType
ICU
ICU License - ICU 1.8.1 and later
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1995-2003 International Business Machines Corporation and others All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation
files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify,
merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do
so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both
the above copyright notice(s) and this permission notice appear in supporting documentation.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS
INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL
DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the
sale, use or other dealings in this Software without prior written authorization of the copyright holder.
I
|