FUJITSU LIFBOOK U749 User Manual

User Manual  
LIFBOOK U729  
LIFBOOK U759  
LIFBOOK U749  
Copyright  
Copyright  
Fujitsu Limited has made every effort to Other product names are trademarks or  
ensure the accuracy and completeness of this registered trademarks of their respective  
document. However, as ongoing development companies.  
efforts are continually improving the capabilities  
of our products, we cannot guarantee the Copyright Fujitsu Limited© 2019. All rights  
accuracy of the contents of this document. We reserved. No part of this publication may be  
disclaim liability for errors, omissions or future copied, reproduced or translated, without the  
changes.  
prior written consent of Fujitsu Limited. No part  
of this publication may be stored or transmitted  
in any electronic form without the written  
consent of Fujitsu Limited.  
LIFEBOOK is a trademark of Fujitsu Limited.  
Microsoft, Windows, MS, Windows 10 are  
registered trademarks of the Microsoft This device complies with Part 15 of the FCC  
Corporation of the United States in the United rules. Operations are subject to the following  
States and other countries.  
two conditions:  
Phoenix is a registered trademark of Phoenix (1) This device may not be allowed to cause  
Technologies Corporation of the United States.  
harmful interference.  
(2) This device must accept any interference  
received, including interference that may  
cause undesired  
Copyright© Microsoft Corporation 2019. All  
rights reserved.  
Copyright© Phoenix Technologies, Ltd. 2019.  
All rights reserved.  
The terms HDMI and HDMI High-Definition  
Multimedia Interface, and the HDMI Logo are  
trademarks or registered trademarks of HDMI  
Licensing, LLC in the United States and other  
countries.  
DECLARATION OF CONFORMITY  
according to FCC Part 15  
i
9. If an extension cord is used with this product,  
make sure that the total ampere rating of the  
equipment plugged into the extension cord  
does not exceed the extension cord ampere  
rating. Also make sure that the total rating of  
all products plugged into the wall outlet does  
not exceed 15 amperes.  
IMPORTANT SAFETY  
INSTRUCTIONS  
1. Read these instructions carefully. Save  
these instructions for future reference.  
2.  
Follow all warnings and instructions marked  
on the product.  
10.Never push objects of any kind into this  
product through cabinet slots as they may  
touch dangerous voltage points that could  
result in a fire or electric shock. Never spill  
liquid of any kind on the product.  
3.  
Unplug this product from the wall outlet  
before cleaning. Do not use liquid cleaners  
or aerosol cleaners. Use a damp cloth for  
cleaning.  
11. Do not attempt to service this product  
yourself, as opening or removing covers  
may expose you to dangerous voltage points  
or other risks. Refer all servicing to qualified  
service personnel.  
4.  
Do not use this product near water.  
5. Do not place this product on an unstable  
cart, stand or table. The product may drop,  
causing serious damage to the product.  
12.Unplug this product from the wall outlet and  
refer servicing to qualified service personnel  
under the following conditions:  
6.  
Slots and openings in the cabinet and the  
back or bottom are provided for ventilation;  
to ensure reliable operation of the product  
and to protect it from overheating, these  
openings must not be blocked or covered.  
The openings should never be blocked by  
placing the product on a bed, sofa, rug or  
other similar surface. This product should  
never be placed near or over a radiator  
or heat register or in a built-in installation  
unless proper ventilation is provided.  
a.  
When the power cord or plug is damaged  
or frayed.  
b.  
c.  
If liquid has been spilled into the product.  
If the product has been exposed to rain or  
water.  
d. If the product dose not operate normally  
when the operating instructions are  
followed. Adjust only those controls that  
are covered by the operating instructions  
since improper adjustment of other controls  
may result in damage and will often require  
extensive work by a qualified technician to  
restore the product to normal condition.  
7.  
This product should be operated from the  
type of power indicated on the marking  
label. If you are not sure of the type of power  
available, consult your dealer or local power  
company.  
e.  
If the product has been dropped or the  
cabinet has been damaged.  
8. Do not allow anything to rest on the power  
cord. Do not locate this product where  
persons will walk on the cord.  
f.  
If the product exhibits a distinct change in  
performance, indicating a need for service.  
ii  
Copyright  
13.CAUTION: When replacing the battery,  
be sure to install it with the polarities in  
the correct position. There is a danger of  
explosion if the battery is replaced with  
an incorrect type or is mistreated. Do  
not recharge, disassemble or dispose  
of in fire. Replace only with the same  
or equivalent type recommended by  
the manufacturer. Dispose of the used  
battery according to the manufacturer’s  
instructions.  
Proper Disposal of Battery  
Under federal, state or local law, it may be illegal  
to dispose of batteries by putting them in the  
rubbish bin or trash cans. Please take care of our  
environment and dispose of batteries properly.  
Check with your local government authority  
for details regarding recycling or disposing of  
unwanted batteries.  
14.  
Use only the proper type of power cord set  
(provided in the accessories box) for this  
unit. It should be detachable type and with  
respective certification.  
P O I N T  
The point icon highlights information that  
will enhance your understanding of the  
subject material.  
C A U T I O N  
The caution icon highlights information  
that is important to the sae operation of  
your computer, or to the integrity of your  
files. Please read all caution information  
carefully.  
W A R N I N G  
The warning icon highlights information  
that can be hazardous to either you, your  
computer, or your files. Please read all  
warning information carefully.  
iii  
among other information. If requested the user  
must provide their telephone company with the  
following information:  
C A U T I O N  
Changes or modifications not expressly  
approved by Fujitsu could void this user’s  
authority to operate the equipment.  
1. The telephone number to which the  
Tablet PC is connected.  
2. The Ringer Equivalence Number (REN)  
for this equipment.  
3. That the equipment requires a standard  
modular jack type USOC RJ-11C which is  
FCC Part 68 compliant.  
FCC NOTICES  
Notice to Users of Radios and Television  
These limits are designed to provide reasonable  
protection against harmful interference in  
a residential installation. This equipment  
generates, uses, and can radiate radio  
frequency energy and, if not installed and used  
in accordance with the instructions, may cause  
harmful interference to radio communications.  
However, there is no guarantee that interference  
will not occur in a particular installation. If this  
equipment does cause harmful interference  
to radio or television reception, which can be  
determined by turning the equipment off and  
on, the user is encouraged to try to correct the  
interference by one or more of the following  
measures:  
4. The FCC Registration Number.  
This equipment is designed to be connected  
to the telephone network or premises wiring  
using a standard modular jack type USOC  
RJ-11C which is FCC Part 68 68 compliant  
and a line cord between the modem and the  
telephone network with a minimum of 26AWG.  
The REN is used to determine the number  
of devices that you may connect to your  
telephone line and still have all of those  
devices ring when your number is called. Too  
many devices on one line may result in failure  
to ring in response to an incoming call. In  
most, but not all, areas the sum of the RENs  
of all of the devices should not exceed five (5).  
To be certain of the number of devises you  
may connect to your line, as determined by the  
RENs, contact your local telephone company.  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the  
equipment and receiver.  
• Connect the equipment into an outlet that is  
on a different circuit than the receiver.  
• Consult the dealer or an experienced radio/  
TV technician for help.  
If this equipment cause harm to the telephone  
network your telephone company may  
discontinue your service temporarily. If  
possible, they will notify you in advance. If  
advance notice is not practical they will notify  
you as soon as possible. You will also be  
advised of your right to file a complaint with  
the FCC.  
Shielded interconnect cables must be employed  
with this equipment to ensure compliance with  
the pertinent RF emission limits governing this  
device.  
Notice to Users of the US Telephone Network*  
This fax modem also complies with fax branding  
requirements per FCC Part 68.  
Your Stylistic maybe supplied with an internal  
modern which complies with Part 68 of the FCC  
rules. On this Tablet PC is a label that contains  
the FCC Registration Number and the Ringer  
Equivalence Number (REN) for this equipment  
Your telephone company will probably ask  
you to disconnect this equipment from the  
telephone network until the problem is  
corrected and you are sure that the equipment  
is not malfunctioning.  
*For model with modern only  
iv  
Copyright  
This equipment may not be used on telephone  
provided by your telephone company. Connection  
to party lines is subject to state tariffs. Contact  
your state’s public utility commission, public  
service commission or corporation commission for  
more information.  
This equipment includes automatic dialing capability.  
When programming and/or making test calls to  
emergency numbers:  
• Remain on the line and briefly explain to the  
dispatcher the reason for the call.  
• Perform such activities in off-peak hours,  
such as early morning or late evening.  
FCC rules prohibit the use of non-hearing aid  
compatible telephones in the following locations  
or applications:  
• All public or semipublic coin-operated or  
credit card telephones.  
• Elevators, highways, tunnels (automobile,  
subway, railroad or pedestrian) where a  
person with impaired hearing might be  
isolated in an emergency.  
• Places where telephones are specifically  
installed to alert emergency authorities  
such as fire, police or medical assistance  
personnel.  
• Hospital rooms, residential health care  
facilities, convalescent homes and prisons.  
• Workstations for the hearing impaired.  
• Hotel, motel or apartment lobbies.  
• Stores where telephones are used by patrons  
to order merchandise.  
• Public transportation terminals where telephones  
are used to call taxis or to reserve lodging or  
rental cars.  
• In hotel and motel rooms as at least ten percent  
of the rooms must contain hearing aid  
compatible telephones or jacks for plug-in  
hearing aid compatible telephones which will  
be provided to hearing impaired customers  
on request.  
v
ENERGY STAR®  
Compliance  
Notice to Users of Radios and  
Television  
(The following is pending  
certification a time of publication). Your Fujitsu  
system is an ENERGY STAR ® qualified  
mobile PC. By choosing a computer with  
the latest energy saving technology, you’re  
helping to preserve our environment for future  
generations. ENERGY STAR is a joint program  
of the U.S. Environmental Protection Agency,  
U.S. Department of Energy, Natural Resources  
Canada, and other governments around the  
world helping us save money while protecting  
the environment through energy efficient  
products and practices. With energy costs and  
global warming top-of-mind for consumers,  
Fujitsu is committed to offering solutions that  
help consumers conserve energy and improve  
the quality of our environment.  
Sleep Mode:  
You will notice that your computer is initially set  
so that the display turns off after no more than  
10 minutes of user inactivity, and the computer  
goes into system sleep mode after no more  
than 30 minutes of user inactivity. When going  
into Sleep mode, the computer also reduces the  
speed of any active Ethernet network links. To  
“wake” the computer from Sleep mode, press  
the Suspend/ Resume Button.  
Energy saving benefits:  
Fujitsu ENERGY STAR qualified mobile PCs  
use about half as much electricity as standard  
equipment – saving half inutility costs. But  
more than that, ENERGY STAR also makes a  
difference for the environment. Did you know  
that the average house can be responsible  
for twice the greenhouse gas emissions as  
the average car? That’s because every time  
you flip on a light switch, run your dishwasher,  
or turn on your PC, you use energy, which  
means more greenhouse gas emissions from  
power plants. So the more energy we can  
save through energy efficiency, the more we  
help to reduce greenhouse gases and the  
risks of global warming. To learn more about  
the important ENERGY STAR program, visits:  
vi  
Copyright  
For Authorized Repair Technicians Only  
C A U T I O N  
C A U T I O N  
For safety, users should ensure that the  
electrical ground of the power utility, the  
telephone lines and the metallic water  
pipes are connected together.  
Users should NOT attempt to make such  
connections themselves but should contact  
the appropriate electric inspection authority  
or electrician. This may be particularly  
important in rural areas.  
For continued protection against risk of fire,  
replace only with the same type and rating  
fuse.  
W A R N I N G  
Danger of ecplosion if Lithium (CMOS)  
battery is incorrectly replaced. Replace  
only with the same or equivalent type  
UL Notice  
This unit requires an AC adapter to operate. Use  
only UL Listed adapter, output rating 19VDC,  
3.42A/ 4.74A*. Refer to the illustration below for the  
correct AC Adapter output polarity:  
recommended by the manufacturer.  
.
Dispose of used batteries according to the  
manufacturer’s instruction.  
* Please check with local distributor for actual  
bundling.  
Proper Disposal of Battery  
Under federal, state or local law, it may be illegal  
to dispose of batteries by putting them in the  
rubbish bins or trash cans. Please take care of  
our environment and dispose of batteries properly  
for details regarding recycling or disposing of  
unwanted batteries.  
C A U T I O N  
To reduce the risk of fire, use only #26  
AWG or larger telecommunications line  
cord.  
Operation Temperature: 35°C  
vii  
NOTE ON USE REQUIRED HIGH NOTE ON BACKUP DATA  
SAFETY  
Please make a backup of the Operating  
System, any software programs, and created  
files (and update regularly).  
Notice to Users of Radios and Television  
This product is designed and manufactured  
for general use, household use and ordinary  
industrial use.  
If you send this product to Fujitsu, or any of  
its affiliates, suppliers, service providers or  
resellers for repair, Fujitsu does not guarantee  
the data integrity. It is your responsibility to  
back data up beforehand.  
This product is not designed for or intended for  
use under dangerous (fatal) conditions, unless  
extreme safety precautions are implemented.  
Do not use this product without implementing  
high-level safety precautions.  
Failure to follow this warning may result in  
death. Personal injury severs physical damage  
or other loss, if used in or near any or more of  
the following:  
Fujitsu dose not assume any obligation for  
compensation for damages, data integrity,  
or restoration, etc., if your data is lost for any  
reason, except as written in the warranty.  
• Nuclear reaction control system in a nuclear  
facility  
• Automatic flight control system in an airplane  
or other flight control system  
• Mass transport control system  
• Medical instruments for life support system  
• Missile launching control for weapon system  
Contents  
Table of Contents  
GETTING TO KNOW YOUR  
LIFEBOOK  
NAMES OF THE PARTS  
AND THEIR FUNCTIONS  
Front features of LIFEBOOK...........................  
Exterior features: Side view of LIFEBOOK.....  
Exterior features: Bottom view of LIFEBOOK.  
POWER SOURCES  
Connecting the Power Adapter.......................20  
Power On.......................................................21  
Power Off.......................................................21  
Warranty Registering for Your Fujitsu LIFEBOOK..21  
1
4
10  
STATUS INDICATOR LED  
EXPLICIT SELF-INSTALL  
13  
13  
13  
13  
13  
13  
13  
13  
13  
Power Indicator...............................................  
Battery Charging Indicator..............................  
Battery Level Indicator....................................  
Storage Drive Access Indicator.......................  
Wireless/ Bluetooth Indicator..........................  
Function Lock Indicator...................................  
Num Lock Indicator.........................................  
Caps Lock Indicator........................................  
Scroll Lock Indicator........................................  
Charging the Battery.......................................22  
Adding Memory..............................................23  
PORT REPLICATOR  
Port Replicator ..............................................26  
USB Type-CTM Port Replicator ..........................28  
TROUBLESHOOTING  
Identifying the Problem ..................................33  
USING YOUR LIFEBOOK  
RUNNING LIFEBOOK ON ITS BATTERY  
Recharging the Battery....................................  
Running LIFEBOOK on its Battery..................  
Checking the power level of the Battery.........  
Low Battery Condition....................................  
14  
15  
15  
16  
NOTE:  
A copy of LIFEBOOK User Manual is located in  
your Microsoft Windows OS or you can find it  
in Fujitsu website at  
selectioninterface/selection.html  
POWER MANAGEMENT  
17  
17  
18  
19  
19  
Power/Suspend/Resume Button ....................  
Suspend Mode ..............................................  
Hibernation (Save-To-Disk) Feature...............  
Windows Power Management ........................  
Power Off .......................................................  
You can use this LIFEBOOK User’s Manual to  
find out more information about the functions  
and features of your notebook.  
ix  
Getting to Know Your LIFEBOOK  
NAMES OF THE PARTS AND  
THEIR FUNCTIONS  
Front features of LIFEBOOK  
LIFEBOOK U729  
1
2
3
4
5
8
9
5
6
10  
11  
7
(This picture is for illustration purpose only and may look different from the actual unit)  
6. Keyboard  
1. HD Camera  
A full-function keyboard with dedicated  
Windows keys.  
The location of the high definition camera.  
2. Display Panel  
7. Fingerprint Sensor/ Palm vein Sensor*  
The Fingerprint Sensor/ Palm vein Sensor  
provide an alternative way to Windows  
login authentication and homepage login  
authentication.  
The display screen of the notebook.  
3. Status Indicator LED  
This indicator displays operating status  
symbols that corresponed to specific  
componets of your notebook.  
(*Optional)  
4.  
5.  
Power and Suspend/Resume Button  
This button allows you to power on or off the  
notebook. You can use also this button to  
suspend notebook activity without turning off  
the power to it and to resume the notebook  
from suspend mode.  
8. Touch Pad  
It allows you to control the display cursor  
(mouse pointer).  
9. Status Indicator LED  
This indicator displays operating status  
symbols that corresponed to specific  
componets of your notebook.  
Stereo Speaker  
The built-in dual speakers provide stereo  
sound.  
10.Touch Stick*  
It allows you to control the display cursor  
(Mouse point).  
(*Optional)  
P O I N T  
11. SD card slot  
Some applications may not allow you to  
scroll up and down a document.  
1
LIFEBOOK U749  
1
2
3
4
5
8
9
5
6
10  
11  
7
(This picture is for illustration purpose only and may look different from the actual unit)  
1. HD Camera  
6. Keyboard  
The location of the high definition camera.  
A full-function keyboard with dedicated  
Windows keys.  
2. Display Panel  
The display screen of the notebook.  
7. Fingerprint Sensor/ Palm vein Sensor*  
The Fingerprint Sensor/ Palm vein Sensor  
provide alternative way to Windows  
login authentication and homepage login  
authentication.  
3. Status Indicator LED  
This indicator displays operating status  
symbols that corresponed to specific  
componets of your notebook.  
(*Optional)  
4.  
5.  
Power and Suspend/Resume Button  
This button allows you to power on or off the  
notebook. You can use also this button to  
suspend notebook activity without turning off  
the power to it and to resume the notebook  
from suspend mode.  
8. Touch Pad  
It allows you to control the display cursor  
(Mouse pointer).  
9. Status Indicator LED  
This indicator displays operating status  
symbols that corresponed to specific  
componets of your notebook.  
Stereo Speaker  
The built-in dual speakers provide stereo  
sound.  
10.Touch Stick*  
It allows you to control the display cursor  
(mouse point).  
(*Optional)  
P O I N T  
11. SD card slot  
Some applications may not allow you to  
scroll up and down a document.  
2
Getting to Know Your LIFEBOOK  
LIFEBOOK U759  
1
2
3
4
5
8
9
5
6
10  
11  
7
(This picture is for illustration purpose only and may look different from the actual unit)  
1. HD Camera  
6. Keyboard  
The location of the high definition camera.  
A full-function keyboard with dedicated  
Windows keys.  
2. Display Panel  
The display screen of the notebook.  
7. Fingerprint Sensor/ Palm vein Sensor*  
The Fingerprint Sensor/ Palm vein Sensor  
provide alternative way to Windows  
login authentication and homepage login  
authentication.  
3. Status Indicator LED  
This indicator displays operating status  
symbols that corresponed to specific  
componets of your notebook.  
(*Optional)  
4.  
5.  
Power and Suspend/Resume Button  
This button allows you to power on or off the  
notebook. You can use also this button to  
suspend notebook activity without turning off  
the power to it and to resume the notebook  
from suspend mode.  
8. Touch Pad  
It allows you to control the display cursor  
(mouse pointer).  
9. Status Indicator LED  
This indicator displays operating status  
symbols that corresponed to specific  
componets of your notebook.  
Stereo Speaker  
The built-in dual speakers provide stereo  
sound.  
10.Touch Stick*  
It allows you to control the display cursor  
(mouse point).  
(*Optional)  
P O I N T  
11. SD card slot  
Some applications may not allow you to  
scroll up and down a document.  
3
Side view of LIFEBOOK  
Right view  
LIFEBOOK U729  
1
2
3
4
(This picture is for illustration purpose only and may look different from the actual unit)  
1. USB 3.1 (Gen 1) Connector  
The USB 3.1 (Gen 1) connector allows you  
to connect Universal Serial Bus devices and  
backward compatible with USB 2.0 devices.  
2. HDMI Connector  
LAN (RJ45)  
3.  
This allows you to connect to a LAN (local  
area network) using an optional LAN cable.  
The port is compatible with 1000/100/10  
Base-T networks.  
Kensington lock  
4.  
It allows you to attach an optional physical  
lock down device.  
4
Getting to Know Your LIFEBOOK  
LIFEBOOK U749  
1
2
3
4
5
(This picture is for illustration purpose only and may look different from the actual unit)  
1. HD Audio-in/out  
2. USB 3.1 (Gen 1) Connector  
It allows jack sensing of the following audio  
input/output devices.  
The USB 3.1 (Gen 1) connector allows you  
to connect Universal Serial Bus devices and  
backward compatible with USB 2.0 devices.  
• Headphone  
It allows you to connect a Ø3.5mm  
headphone to it. There are commercially  
available headphones with different types  
of connector. Please check the compatibility  
of these headphones before purchase.  
3. HDMI Connector  
4. LAN (RJ45)  
This allows you to connect to a LAN (local  
area network) using an optional LAN cable.  
The port is compatible with 1000/100/10  
Base-T networks.  
• Microphone  
Connect an external microphone. The  
internal microphone is disabled,when you  
plug in an external microphone.  
5. Kensington lock  
It allows you to attach an optional physical  
lock down device.  
• Line-in  
It allows you to connect an external audio  
source to it e.g. an external CD player or  
a MP3 player.  
5
LIFEBOOK U759  
1
2
3
4
5
6
(This picture is for illustration purpose only and may look different from the actual unit)  
1. HD Audio-in/out  
2. USB 3.1 (Gen 1) Connector  
The USB 3.1 (Gen 1) connector allows you  
to connect Universal Serial Bus devices  
and backward compatible with USB 2.0  
devices.  
It allows jack sensing of the following audio  
input/output devices.  
• Headphone  
It allows you to connect a Ø3.5mm  
headphone to it. There are commercially  
available headphones with different  
types of connector. Please check the  
compatibility of these headphones before  
purchase.  
3. DisplayPort  
4. HDMI connector  
5. LAN (RJ45)  
It allows you to connect to a LAN (local area  
network) using an optional LAN cable. The  
port is compatible with 1000/100/10 Base-T  
networks.  
• Microphone  
Connect an external microphone. The  
internal microphone is disabled,when you  
plug in an external microphone.  
6. Kensington lock  
• Line-in  
It allows you to attach an optional physical  
lock down device.  
It allows you to connect an external audio  
source to it e.g. an external CD player or  
a MP3 player.  
6
Getting to Know Your LIFEBOOK  
Side view of LIFEBOOK  
Left view  
LIFEBOOK U729  
3
5
1
4
6
(This picture is for illustration purpose only and may look different from the actual unit)  
1. DC-in  
4. HD Audio-in/out  
It allows jack sensing of the following audio  
input/output devices.  
2. ThunderboltTM 3 Connector  
The ThunderboltTM 3 connector is for a small  
24-pin reversible-plug connector for USB  
devices and USB cabling. This connector has  
power output of 5V/3A and charging input  
function.  
• Headphone  
It allows you to connect a Ø3.5mm  
headphone to it. There are commercially  
available headphones with different  
types of connector. Please check the  
compatibility of these headphones before  
purchase.  
3. USB 3.1 (Gen 1) Connector  
The USB 3.1 (Gen 1) connector with anytime  
charging function allows you to connect  
Universal Serial Bus devices and is backward  
compatible with USB 2.0 devices.  
• Microphone  
Connect an external microphone. The  
internal microphone is disabled,when you  
plug in an external microphone.  
• Line-in  
It allows you to connect an external audio  
source to it e.g. an external CD player or  
a MP3 player.  
5. Smartcard Slot (Optional)  
7
LIFEBOOK U749  
3
4
5
1
2
(This picture is for illustration purpose only and may look different from the actual unit)  
4. USB 3.1 (Gen 1) Connector  
1. DC-in  
The USB 3.1 (Gen 1) connector with  
anytime charging function allows you to  
connect Universal Serial Bus devices and is  
backward compatible with USB 2.0 devices.  
2. VGA Connector  
This port allows you to connect external  
display devices.  
3. ThunderboltTM 3 Connector  
5. Smartcard Slot (Optional)  
The ThunderboltTM 3 connector is for a small  
24-pin reversible-plug connector for USB  
devices and USB cabling. This connector has  
power output of 5V/3A and charging input  
function.  
8
Getting to Know Your LIFEBOOK  
LIFEBOOK U759  
3
4
5
1
2
(This picture is for illustration purpose only and may look different from the actual unit)  
4. USB 3.1 (Gen 1) Connector  
1. DC-in  
The USB 3.1 (Gen 1) connector with anytime  
charging function allows you to connect  
Universal Serial Bus devices and is backward  
compatible with USB 2.0 devices.  
2. VGA Connector  
This port allows you to connect external  
display devices.  
3. ThunderboltTM 3 Connector  
5. Smartcard Slot (Optional)  
The ThunderboltTM 3 connector is for a small  
24-pin reversible-plug connector for USB  
devices and USB cabling. This connector has  
power output of 5V/3A and charging input  
function.  
9
Bottom view of LIFEBOOK  
LIFEBOOK U729  
1
5
2
2
3
4
(This picture is for illustration purpose only and may look different from the actual unit)  
1. Battery Bay  
The location of the battery pack.  
2. Battery Lock Latch  
This latch secures the battery pack in the  
battery bay.  
3. Port Replicator Connector  
4. Expansion RAM Slot  
The location of the expansion memory slot.  
5. SSD Slot  
The location of the M.2 Solid-State Drives  
slot.  
10  
Getting to Know Your LIFEBOOK  
LIFEBOOK U749  
5
1
2
2
3 4  
(This picture is for illustration purpose only and may look different from the actual unit)  
1. Battery Bay  
The location of the internal battery pack.  
2. Battery Lock Latch  
This latch secures the battery pack in the  
battery bay.  
3. Port Replicator Connector  
4. Expansion RAM Slot  
The location of the expansion memory slot.  
5. SSD Slot  
The location of the M.2 Solid-State Drives  
slot.  
11  
电源  
管理  
LIFEBOOK U759  
5
1
2
2 3 4  
(This picture is for illustration purpose only and may look different from the actual unit)  
1. Battery Bay  
The location of the internal battery pack.  
2. Battery Lock Latch  
This latch secures the battery pack in the  
battery bay.  
3. Port Replicator Connector  
4. Expansion RAM Slot  
The location of the expansion memory slot.  
5. Storage Drive  
12  
Getting to Know Your LIFEBOOK  
STATUS INDICATOR LED  
1
2
3
4
5
6
7
8
9
(This picture is for illustration purpose only and may look different from the actual unit)  
1. Power Indicator (  
)
P O I N T  
This indicator turns on when there is power to  
the notebook. It turns off when the notebook  
is powered off. This indicator will blink if the  
notebook is put in suspend mode.  
Do not power off the notebook when the  
storage drive access indicator is shown.  
Failture to do so corrupt data on the  
storage drive as well as the installed  
operating system.  
2. Battery Charging Indicator(  
)
This indicator turns on when internal battery  
is being charged.  
3. Battery Level Indicator (  
)
The Battery Level Indicator states the  
presence of stardard Li-ion battery and show  
the remaining power of the battery.  
7. Num Lock Indicator (  
)
The keyboard is locked in Num Lock mode.  
(You can use the keyboard as a ten-digit  
keyboard when the Num Lock mode is  
turned on). Toggle the Num Lock mode by  
4. Storage Drive Access Indicator (  
)
This indicator turns on when storage drive is  
being accessed.  
using the [  
] key.  
8. Caps Lock Indicator (  
)
5. Wireless LAN / Bluetooth* Indicator (  
)
Toggle the Caps Lock mode by using the  
] key.  
This indicator turns on when the wireless  
LAN of the notebook is being activated by,  
user.  
[
9.  
Scroll Lock Indicator (  
)
* For model with Bluetooth  
This indicator turns on when the lock mode  
is turned on. You can toggle the Scroll Lock  
button by using the [  
down the[ ] key.  
6. Function Lock Indicator (  
This indicator turns on when the function  
key are locked. (You can press [ ]+[F1-  
F12] to activate the multimedia controls.)  
Press [ ]+[ ], and it locks it for that  
)
] key while holding  
session. When the computer reboots, this is  
reset back to the default.  
13  
RUNNING THE NOTEBOOK  
ON ITS BATTERY  
P O I N T  
When the battery is very hot, for  
example, immediately after long usage  
of the notebook, the battery protection  
feature may be activated to prevent  
the battery from being recharged.  
When the temperature decreases,  
the notebook automatically begins to  
charge the battery.  
Recharging the battery  
1. Connect the AC adapter to your notebook  
The moment you connect an AC adapter  
to your notebook, the notebook begins to  
charge the internal standard battery pack.  
The charging status (  
Indicator LED turns on.  
) on the Status  
When an optional modular bay battery  
is installed, it is charged along with  
the internal standard battery. (Optional  
modular bay battery is applicable to  
selected models only.)  
2. When the indicator turns off after the  
battery is completely charged, disconnect  
the AC adapter from the notebbok.  
Do not power off the notebook when  
the storage drive access indicator is  
shown. Failure to do so corrupt data  
on the storage drive as well as the  
installed operating system.  
P O I N T  
Before using the supplied battery pack  
for the very first time after purchase,  
remember to charge it fully. If a charged  
battery has not been recharged for more  
than a month, charge it fully before using  
it.  
Battery Charging Indicator (  
)
This lamp indicates charging status of built in  
battery when AC adaptor is connected to PC.  
When the battery is fully charged while  
the notebook is in power off mode, the  
Battery Charging Indicator turns off.  
Green lamp is lit  
Charging completed or not charging due to  
no built-in battery installed.  
Amber lamp is lit  
Charging.  
P O I N T  
Amber lamp flashes  
Charging stopped  
(due to battery temperature alarm, etc.)  
When the battery is 90% or more  
charged, it cannot be recharged even  
if the AC adapter is connected. The  
battery can be recharged when its  
power level (i.e. remaining battery life) is  
89% or less.  
OFF  
No charging due to disconnect AC adapter.  
When a notebook is turned off, the  
Battery Level LED indicator goes off  
immediately if the battery is completely  
charged.  
P O I N T  
When the power is turned off, the status  
display LEDs are all OFF except for  
during battery charging.  
The chargeability of the battery  
degrades when it is used in an  
extremely hot or cold place.  
14  
Getting to Know Your LIFEBOOK  
Checking the power level  
of the battery  
When the notebook is turned on or when the  
battery is being charged, the Battery Level  
Running LIFEBOOK on its Battery  
This section describes the steps to run the  
notebook on its internal standard battery.  
indicators  
show the power level of the battery.  
turns on with different color to  
Disconnect the AC adapter from your notebook  
and press the power button.  
■ Different power level of the battery  
• White lamp is lit  
Remaining battery level: 100% – 51%  
• Amber lamp is lit  
Remaining battery level: 50 – 13%  
• Red lamp is lit  
Remaining battery level: 12% or below  
Red lamp flashes  
Abnormal battery condition.  
• OFF  
Battery pack disconnected.  
Power Button  
(This picture is for illustration purpose only and  
may look different from the actual unit)  
P O I N T  
P O I N T  
The power level of the battery decreases  
faster when it is used in a cold place.  
Due to certain characteristics of battery,  
the Battery Level Indicators may not  
correctly show the remaining power of  
the battery, especially under extreme  
temperature conditions.  
The chargeability of the battery decreases  
after it has been used over a long period  
of time. If the battery runs down very fast,  
replace it with a new battery.  
When an optional modular bay battery  
is installed, it is charged along with the  
internal standard battery.  
15  
Low battery condition  
If the battery level indicator on the status  
indicator LED  
turns red. If it turns red,  
connect the AC adapter to your notebook  
immediately to recharge the battery.  
P O I N T  
The use of a weak battery may result  
in lost of data you are currently working  
on. When the battery runs low, connect  
the AC adapter to your notebook as  
soon as an external power source is  
available or immediately save the data  
you are working on, exit all applications  
and turn off the notebook.  
Accessing data on the storage drive  
consumes a lot of power. Therefore  
when the battery is weak, connect an  
AC adapter to the notebook before  
accessing data on the storage drive .  
If a battery is weak and there is no  
system activity, the notebook may  
go into standby(i.e. suspend) mode.  
However, if there is system activity, the  
notebook will go into standby mode  
only after the system activity has  
completed its processing.  
The notebook will go into standby  
mode when the indicator reaches  
3%. This is the default setting if the  
notebook.  
NOTE 1:  
Battery temperature alarm is to stop charging  
with battery protection function when  
temperature of built-in battery pack or extended  
built-in battery unit becomes too high or too  
low due to battery heat or cooling down of the  
battery.  
16  
Using Your LIFEBOOK  
POWER MANAGEMENT  
Your Fujitsu LIFEBOOK has many options and  
features for conserving battery power. Some  
of these features are automatic and need no  
user intervention, such as those for the internal  
modem. However, others depend on the  
parameters you set to best suit your operating  
conditions, such as those for the display  
brightness. Internal power managements for  
your notebook mat be controlled from settings  
made in your operating system, pre-bundled  
power management application, or from  
settings made in BIOS setup utility.  
Suspend Mode  
Suspend or Standby mode in Windows saves  
the contents of your notebook's system  
memory during periods of inactivity by  
maintaining power to critical parts. This mode  
will turn off the CPU, the display, the storage  
drive, and all of the other internal components  
except those necessary to maintain system  
memory and allow for restarting. Your notebook  
can be put in Suspend mode by:  
• Pressing the Power/Suspend/Resume  
button when your system is turned on.  
Besides the options available for conserving  
battery power, there are also some things that  
you can do to prevent your battery from running  
down as quickly. For example you can create  
as appropriate power saving profile, put your  
notebook into Suspend mode when it is not  
performing as operation, and you can limit the  
use of high power devices. As with all mobile,  
battery power computers, there is a trade-off  
between performance and power savings.  
• Selecting Standby from the Windows Shut  
Down menu.  
• Timing out from lack of activity.  
• Allowing the battery to reach the Dead  
Battery warning condition.  
Your notebook's system memory typically  
stores the file on which you are working you  
are working, open application information, and  
any other data required to support operation  
from Suspend mode, your notebook will return  
to the point where it left off. You must see the  
Power. Suspend/Resume button to resume  
operation, and there must be as adequate  
power source available, or your notebook will  
not resume.  
Power/Suspend/Resume Button  
When you LIFEBOOK is active, the Power/  
Suspend/Resume button can be used to  
manually out your notebook into Suspend  
mode. Push the Power/Suspend/Resume  
button when your notebook is active, but not  
actively accessing anything, and immediately  
release the button. You will hear two short  
beeps* and your system will enter Suspend  
mode.  
P O I N T  
If you are running your LIFEBOOK  
on battery power, be aware that the  
battery continues to discharge while  
your notebook is in Suspend mode,  
though not as fast as when fully  
operational.  
If your LIFEBOOK is suspended, pushing the  
Power/Suspend/Resume button returns your  
notebook to active operation. You can tell  
whether the system is Suspended by looking at  
the Power indicator. If the indicator is visible and  
not flashing, your notebook is fully operational.  
If the indicator is visible and fl ashing, your  
notebook is in Suspend mode. If the indicator is  
not visible, the power is off or your notebook is  
in Hibernation mode.(See Hibernation Feature)  
The main advantage of using the  
Hibernation(Save-to-Disk) function is  
that power is not required to maintain  
your data. This is particularly important  
if you wil be leaving your LIFEBOOK  
in a suspended state for a prolonged  
period of time. The drawback of using  
Hibernation mode is the it lengthens the  
power down and power up sequences  
and resets peripheral devices.  
* Only applicable for some models  
17  
Hibernation (Save-To-Disk) Feature  
The Hibernation feature saves the contents of  
your LIFEBOOK notebook’s system memory  
to the storage drive as a part of the Suspend/  
Resume mode. You can enable or disable this  
feature.  
Enable or Disable the Hibernation Feature  
Windows 10:  
1. Visit Control Panel.  
2. Select "System and Security" and then  
select "Power Options"  
3. Select "Change what power button  
do", and click "Change settings that are  
currently unavailable".  
4. Under "Shutdown Setting", select the  
Hibernate tab. Select the box to enable or  
disable this feature and click "Save changes"  
to apply.  
18  
Using Your LIFEBOOK  
Windows Power Management  
Power Off  
The Power Options icon located in the  
Windows Control Panel allows you to configure  
some of the power management settings. For  
example, you can use the Power Options to  
set the timeout values for turning off the display  
and storage drive whether you are running  
the notebook on battery power or one of the  
adapters.  
Before turning off power, check that the storage  
drive access indicator is off. If you turn off the  
power while accessing storage drive there is a  
risk of data loss. To ensure that your notebook  
shuts down without error, use the Windows  
shut down procedure.  
Restarting the System  
C A U T I O N  
If your system is on and you need to restart it,  
be sure that you use the following procedure.  
Be sure to close all files, exit all  
applications, and shut down your operating  
system prior to turning off the power. If  
files are open when you turn the power off,  
you will lose any changes that have not  
been saved, and may cause storage drive  
errors.  
Windows 10  
1. Click the Windows icon  
2. Click the Power, and select Restarting  
from the list.  
Using the correct procedure to shut down from  
Windows allows your notebook to complete  
its operations and turn off power in the  
proper sequence to avoid errors. The proper  
sequence is:  
I M P O R TA N T  
Turning off your notebook without exiting  
Windows or turning on your notebook  
within 10 seconds of the notebook being  
shut off may cause an error when you  
start the next time.  
Windows 10  
1. Click the Windows icon  
2. Click the Power, and select Shut down  
from the list.  
If you are going to store your notebook for a  
month or more see Care and Maintenance  
Section.  
19  
POWER SOURCES  
DC-in  
DC Output Cable  
AC Adapter  
AC Cable  
(This picture is for illustration purpose only and may look different from the actual unit)  
Connecting the AC Adapter  
The AC adapter provides power for operating  
your notebook and charging the batteries.  
Connecting the AC Adapter  
1. Plug the DC output cable into the DC-in of  
your notebook.  
2. Plug the AC adapter into an AC electrical  
outlet. (Above Figure)  
P O I N T  
The battery is not charged at the point  
of purchase. Remember to connect an  
AC adapter to your notebook to charge  
it when you use it for the first time.  
20  
Using Your LIFEBOOK  
Power on  
Power off  
Power/Suspend/Resume button  
Before turning off the power, check that the  
storage drive access indicator is off. If you  
power off the notebook when it is acessing the  
storage drive, data may be lost or corrupted.  
To power off the notebook, always shut down  
the notebook properly using the Windows  
shutdown procedure.  
You can use the Power/Suspend/Resume  
button to turn on your notebook. Once you have  
connected an AC adapter to the notebook or  
charged the battery, you can power on your  
notebook.  
P O I N T  
When you turn on your notebook,  
be sure you have a power source  
connected to it. This means that at  
least battery is installed and charged or  
that the AC adapter is connected and  
has power.  
C A U T I O N  
Remember to close all files, exit all  
applications and shut down the operating  
system prior to turning off the power using  
the power button. If documents are opened  
when the notebook is turned off, data may  
be lost and this may result in storage drive  
errors.  
You can press the Power/Suspend/Resume  
button to turn off the notebook. After you have  
finished working on the notebook, you can  
either leave it in Standby (i.e. suspend) mode  
or turn it off.  
Remember to use the correct procedure to  
shut down the notebook. The proper procedure  
is:  
C A U T I O N  
Windows 10  
Do not carry the notebook around when  
it is still powered on. Do not subject the  
notebook to shocks and vibrations. Failure  
to do so may damage the notebook.  
1. Click the Windows icon  
2. Click the Power, and select Shut down  
from the list.  
Warranty Registering for Your  
Fujitsu LIFEBOOK  
When you power on your notebook, it will  
perform a Power On Self Test (POST) to check  
the internal parts and configuration for normal  
functionality. If an error is found, your notebook  
will emit an audio warning and/or show an error  
message.  
How do I register?  
You can register your LIFEBOOK by going to  
our website:  
After satisfactory completion of the Power On  
Self Test (POST), your notebook will load your  
operating system.  
21  
4. Take the battery from battery bay  
CHANGING THE BATTERY  
C A U T I O N  
Before changing battery bay, remember to  
power off the notebook and disconnect the  
AC adapter from it.  
Keep small objects, such as a cover,  
caps and screws, out of the reach of  
babies and children. These small objects  
may suffocate a baby or child if they are  
swallowed accidentally. Should such  
an accident happen, consult a doctor  
immediately.  
5. Put a new battery into the battery bay.  
You can install an optional battery module.  
1. Turn off the notebook and disconnect the  
AC adapter from it.  
2. Close the panel and place the notebook  
upside down.  
3. Unlock Battery Lock Latch and release the  
battery cover as shown in Fig.  
I M P O R TA N T  
1
After removing the battery, please take  
necessary precautions to prevent it from  
being shorted. For example, you can  
seal the connector ends with insulating  
tape. After removing the battery pack,  
do not mix it with other types of battery.  
The internal battery pack contains  
recyclable material.  
2
I M P O R TA N T  
Close the panel gently. Do not exert  
excessive pressure to it. Failure to do  
so may damage the panel.  
22  
Explicit Self-instal  
ADDING MEMORY  
Total capacity  
Slot 1  
4GB  
Slot 2  
4GB  
8GB  
Where to install memory  
This LIFEBOOK has two RAM slot, it has a  
maximum capacity of 32GB (16GB x 2).  
4GB  
4GB  
8GB  
8GB  
Preparing necessary items  
16GB  
16GB  
32GB  
8GB  
8GB  
• Philips screwdriver  
Use a screwdriver of appropiate size to remove  
the screws on the cover. Failure to do so may  
damage the head of the screws.  
16GB  
16GB  
16GB  
Memory compartment cover  
P O I N T  
Memory Module Configuration Table.  
The table below shows combinations  
of memory size modules that can be  
installed on your notebook.  
The installation of any combination of memory  
size modules other than the combinations  
shown below can impair the functioning of your  
notebook.  
This LIFEBOOK is capable of operating in dual  
channel memory mode. To realized the full  
performance benefits, the two memory slots  
must be installed with two DDR4-2400 memory  
modules of the same capacity and specification.  
We strongly recommend you to use only Fujitsu  
approved memory modules.  
23  
1. Turn off the notebook and disconnect  
the AC adapter from it.  
Installing memory module  
To install memory, perform these steps.  
2. Close the panel and place the notebook  
upside down.  
W A R N I N G  
3. Remove the screw securing the memory  
compartment slot cover and remove it.  
Before installing any memory module,  
remember to power off the notebook and  
disconnect the AC adapter from it.  
Remove the battery compartment cover at  
the bottom of the notebook.  
Keep small objects, such as a cover,  
caps and screws, out of the reach of  
babies and children. These small objects  
may suffocate a baby or child if they are  
swallowed accidentally. Should such  
an accident happen, consult a doctor  
immediately.  
Memory compartment cover  
C A U T I O N  
Certain components around the memory  
slots are very hot when the notebook is  
powerd on for a long period of time.  
To avoid possible burns, do not install or  
remove memory module immediately after  
turning off the notebook. Wait for a while  
until its internal components cool down.  
4. Install the memory module  
Insert the memory module into the slot with  
the notch in the memory module aligned  
with the projection on the connector, and  
push the memory module down unit it locks  
in place with a click sound.  
To install or remove a memory module,  
hold it by the edge and be careful not to  
touch any component and IC chip.  
Memory module is made of materials  
sensitive to human body static charges.  
Before handling a memory module,  
always touch an appropiate metal object to  
discharge static charges from your body.  
Please remember to turn off the notebook  
before you begin to install or remove a  
memory module. If the notebook is placed  
in standby or hibernate mode while the  
memory is removed, data may be lost  
or corrupted. This may also damage the  
memory module.  
Notch in the module  
24  
Explicit Self-instal  
5. Attach the memory compartment cover and  
secure it with screws.  
Attach the cover removed in step 3.  
Memory compartment cover  
25  
PORT REPLICATOR  
Mechanical Port Replicator*  
(Optional)  
1
10  
9
8
7
6
12  
5
4
3
2
11  
1.  
2.  
3.  
4.  
5.  
6.  
Power Button  
7. DisplayPort  
Audio-in and out  
8. USB 3.1 (Gen 1) Connector  
9. USB 3.1 Type-CTM Connector  
10. DC-in  
Port Replicator Lock  
LAN (RJ45)  
VGA Connector  
DVI Connector  
11. Cylindrical Keyloack for notebook*  
(Option)  
12.  
Port Replicator Connector for notebook  
26  
Explicit Self-instal  
Connecting the Port Replicator  
C A U T I O N  
Disconnecting the Port Replicator  
1. Unlock the port replicator.  
2. Pull the slide lock as shown.  
Before docking or undocking your  
notebook with the port replicator, be  
sure to touch a grounded metal object  
to prevent electrostatic discharge from  
affecting the computer components.  
1. Align your notebook to the Port Replicator  
connector.  
3. Disconnect your notebook from the port  
replicator.  
Port Replicator Connector  
2. Place your notebook to the port replicator  
and press both sides of your notebook until  
a "click" sound occurs. Your notebook is now  
connected to the port replicator.  
3. You can lock the port replicator with notebook  
by Cylindrical Keylock for security.  
Cylindrical Keylock  
for notebook  
27  
USB TYPE-CTM PORT REPLICATOR*  
(Optional)  
Your Port Replicator is a device that helps you to quickly connect your notebook to your  
peripheral devices, such as a monitor, printer, etc.  
The features offered by the Port Replicator include standard ports for monitor, audio and other  
USB devices, such as mouse and keyboard.  
You need only connect the notebook to the Port Replicator in order to work with your peripheral  
devices.  
8
7
2
6
5
4
1
3
2
(This picture is for illustration purpose only and may look different from the actual unit)  
Ports on the Port Replicator  
Left  
1. Combined Headphones / Microphone Port  
5. DisplayPort  
2. USB 3.1 (Gen 1) Connector  
6. LAN Port  
The USB 3.1 (Gen 1) connector allows you  
to connect Universal Serial Bus devices  
and backward compatible with USB 2.0  
devices.  
7. USB 3.1 Type-CTM Connector  
8. ON/OFF Switch with Power-on Indicator  
3.  
VGA Monitor Port  
This port allows you to connect external  
display devices.  
4. HDMI  
You can use this port connect to a TV with  
HDMI-Out port for high quality video output.  
The HDMI-Out port supports both video  
and audio output.  
28  
Explicit Self-install  
8
9
10  
(This picture is for illustration purpose only and may look different from the actual unit)  
Ports on the Port Replicator  
Right  
8. ON/OFF Switch with Power-on Indicator  
9. DC Input Connector (DC-in)  
Input: 19V / 4.74A  
USB 3.1 Type-CTM Connector for Data  
10.  
Connection  
This Connector for data connection  
and power supply for the notebook.  
Output: 5V, 9V, 12V, 15V, 20V / 3A.  
29  
TM  
Connecting the Mains Adapter to  
the Port Replicator  
Setting Up  
Port Replicator  
USB TYPE-C  
C A U T I O N  
Select a suitable location for the Port  
Replicator before setting it up.  
3
Follow the instructions below when  
doing so:  
2
Never please the Port Replicator on a  
soft surface (e.g. carpeting, upholstered  
furniture, bed). This can block the air vents  
of the notebook and cause overheating  
and damage.  
1
Place the Port Replicator on a stable,  
flat and non-slip surface. Please note  
that the Port Replicator's rubber feet  
may mark certain types of surface.  
1. Connect the power cable to the mains  
adapter (1).  
Never place the Port Replicator to  
extreme environmental conditions.  
2. Plug the power cable into the mains  
sockets (2).  
Protect the port Replicator from dust,  
humidity and heat.  
3. Connect the mains adapter cable to the  
DC-in of the Port Replicator (3).  
30  
Explicit Self-install  
Connecting LIFEBOOK to the Port  
Replicator  
1
2
(This picture is for illustration purpose only and may look different from the actual unit)  
1. Disconnect the mains adapter cable from  
the DC socket (DC-in) of the notebook.  
2. Connect one end of the USB Type-CTM  
cable to ThunderboltTM 3 Connector with  
power delivery function on the notebook  
(1).  
3. Connect the other end of the USB cable  
(USB Type-CTM) to the USB 3.1 (Gen 1)  
Connector Port for Data connection and  
power supply (USB Type-CTM) on the Port  
Replicator (2).  
31  
Switching on LIFEBOOK via the Switching off LIFEBOOK via the  
Port Replicator  
Port Replicator  
Press the ON/ OFF button on the port replicator  
to switch the notebook on.  
Close all applications and shut down your  
operating system (please refer to the manual  
for the operating system).  
P O I N T  
P O I N T  
You can configure the function of the  
ON/ OFF switch under Windows. The  
setting apply both to ON/ OFF switch  
of the notebook and to the ON/ OFF  
switch of the Port Replicator.  
If the notebook cannot be shut down  
properly press the ON/OFF switch on  
the notebook for about four seconds.  
The notebook will switch itself off. Any  
data not saved may be lost.  
Disconnecting LIFEBOOK from  
the Port Replicator  
Disconnect the supplied USB cable (USB  
Type-CTM) from the ThunderboltTM 3 Connector  
on the notebook.  
32  
Troubleshooting  
Troubleshooting  
Before you place the call, you should have  
the following information ready so that the  
customer support representative can provide  
you with the fastest possible solution:  
Your Fujitsu LIFEBOOK is sturdy and subject  
to few problems in the field. However, you may  
encounter simple setup or operating problems  
that you can solve on the spot, or problems  
with peripheral devices, that you can solve by  
replacing the device. The information in this  
section helps you isolate and resolve some of  
these straightforward problems and identify  
failures that require service.  
• Product name  
• Product configuration number  
• Product serial number  
• Purchase date  
• Conditions under which the problem  
occurred  
Identifying the Problem  
If you encounter a problem that you are  
having difficulty in solving, go through the  
following procedure before pursuing further  
troubleshooting.  
• Any error messages that have occurred  
• Hardware configuration  
• Type of device connected, if any  
1. Turn off your notebook.  
See the Configuration Label on the bottom  
of your notebook for configuration and serial  
number.  
2. Make sure the AC adapter is plugged into  
your notebook and to an active AC power  
source.  
3. Make sure that any devices connected to the  
external connectors are plugged in properly.  
You can also disconnect such devices, thus  
eliminating them as possible causes of  
failure.  
4. Turn on your notebook. Make sure it has  
been off at least 10 seconds before you turn  
it on.  
5. Go through the boot sequence.  
P O I N T  
If you keep notes about what you have  
tried, your support representative may  
be able to help you more quickly by  
giving additional suggestions over the  
phone.  
Do not return a failed notebook to  
your supplier until you have talked to a  
support representative.  
33  

Zebra Technologies 17080100000 User Manual
York Gf9s Dh User Manual
Sears Aerocool Pd6231 User Manual
Sanyo Spw Umr164exh56 User Manual
Omega Engineering Fl900 User Manual
Nutone 9198nt User Manual
FUJITSU TWAIN 32 02 User Manual
EPSON BRIGHTLINK PRO 1430WI 02 User Manual
CROSLEY XCM22DMWW User Manual
ASUS RT N600RU User Manual