EPSON 2100 User Manual

Home Cinema 2100/2150 User's Guide  
Contents  
3
4
5
6
7
Home Cinema 2100/2150 User's Guide  
Welcome to the Home Cinema 2100/2150 User's Guide.  
For a printable PDF copy of this guide, click here.  
9
 
Introduction to Your Projector  
Refer to these sections to learn more about your projector and this manual.  
Projector Features  
Your projector includes these special features:  
Bright, high-resolution projection system  
• Up to 2500 lumens of color brightness (color light output) and 2500 lumens of white brightness (white  
light output)  
Note: Color brightness (color light output) and white brightness (white light output) will vary depending  
on usage conditions. Color light output measured in accordance with IDMS 15.4; white light output  
measured in accordance with ISO 21118.  
• Native resolution of 1920 × 1080 pixels (1080p)  
• Images up to 300 inches (7.62 m); for projection on any wall or screen  
Full 3D projection  
• Active 3D projection with RF active shutter glasses  
• Supports side-by-side, top-and-bottom, and frame-packing 3D formats  
Flexible connectivity  
• Two HDMI ports for multiple high-definition AV devices, including MHL support  
• WiDi and Miracast screen mirroring for laptops and mobile devices (Home Cinema 2150)  
• Wireless network support (Home Cinema 2150) for projection, monitoring, and control via remote  
network computer  
• PC Free photo slide shows via connected USB memory devices  
• Audio Out port for connection to external speakers or stereo system  
10  
   
Easy-to-use setup and operation features  
• Vertical lens shift, automatic vertical keystone correction, and horizontal keystone correction slider for  
flexible projector placement  
• Epson's Instant Off and Direct Power On features for quick setup and shut down  
• 1.6× optical zoom ratio for improved zooming capability  
Product Box Contents  
Save all the packaging in case you need to ship the projector. Always use the original packaging (or  
equivalent) when shipping.  
Make sure your projector box included all of these parts:  
1
2
3
Projector  
Remote control  
Remote control batteries (two AA alkaline)  
11  
 
4
Power cord  
Parent topic: Projector Features  
Additional Components  
Depending on how you plan to use the projector, you may need to obtain additional components.  
Note: To connect a Mac that does not include a compatible video output port, you need to obtain an  
adapter that allows you to connect to an input port on the projector. Contact Apple for compatible  
adapter options. To connect a smartphone or tablet, you may need to obtain an adapter that allows you  
to connect to the projector. This allows you to mirror your smartphone or tablet screens, watch movies,  
and more. Contact your device manufacturer for compatible adapter options.  
Unless listed as available from Epson in this table, see your local computer or electronics dealer for  
purchase information.  
Signal or connection  
type  
Additional component necessary  
HDMI  
Compatible HDMI cable  
Available for purchase from Epson or an authorized Epson reseller.  
Note: Older Mac computers (2009 and earlier) may not support HDMI  
audio.  
MHL  
MHL-compatible device or device with an integrated MHL connector, MHL  
cable, or HDMI cable and MHL adapter compatible with your device  
Available for purchase from Epson or an authorized Epson reseller.  
VGA  
3D  
To connect a computer through its VGA port to the projector's VGA video  
port, you need a VGA computer cable.  
Compatible HDMI cable and active shutter 3D glasses  
Available for purchase from Epson or an authorized Epson reseller.  
Note: If your video source is a 3D Blu-ray disc, you also need a Blu-ray  
player that supports 3D playback. See your local computer or electronics  
dealer for purchase information.  
12  
 
Signal or connection  
type  
Additional component necessary  
Additional audio  
Speakers, an audio video receiver, or a video source with speaker  
connections, and the cables necessary for connecting them to the projector  
Parent topic: Projector Features  
Additional Projector Software and Manuals  
After connecting and setting up the projector, download the projector software and manuals as  
necessary.  
You can install the projector software programs listed here and view their manuals for instructions on  
using them.  
Note: If you still need help after checking this manual and the sources listed here, you can use the  
Epson PrivateLine Support service to get help fast. For details, see "Where to Get Help".  
Projector software  
Manual  
Description  
Epson iProjection  
(Windows/Mac)  
Epson iProjection  
Operation Guide  
Lets you hold interactive meetings by  
projecting the computer screens of users over  
a network.  
(Home Cinema 2150)  
You can download the latest software and  
documentation from the Epson web site. Go to  
(Canada) and select your projector.  
Epson iProjection app  
(Home Cinema 2150)  
Instructions are included  
with the app  
Lets you project from an iOS device, Android  
device, or Chromebook if your projector is  
connected to a network that includes a  
wireless access point.  
Visit epson.com/iprojection (U.S.) or  
epson.ca/iprojection (Canada) for more  
information.  
Open Source Software  
License  
You can download this document from the  
Epson web site. Go to epson.com/support  
(U.S.) or epson.ca/support (Canada) and  
select your projector.  
13  
 
Parent topic: Projector Features  
Optional Equipment and Replacement Parts  
You can purchase screens, other optional accessories, and replacement parts from an Epson authorized  
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766) in the U.S. or 800-807-7766 in  
Canada. Or you can purchase online at epsonstore.com (U.S. sales) or epsonstore.ca (Canadian sales).  
Epson offers the following optional accessories and replacement parts for your projector:  
Option or part  
Part number  
V13H010L96  
V13H134A54  
V13H134A55  
V12H548006  
V12H808001  
ELPSC80  
Genuine Epson replacement lamp (ELPLP96)  
Home Cinema 2100 replacement air filter (ELPAF54)  
Home Cinema 2150 replacement air filter (ELPAF55)  
RF 3D glasses (ELPGS03)  
Universal projector ceiling mount (ELPMBPJG)  
Accolade Duet ultra portable projector screen  
HDMI audio video cable 3 feet (0.9 m) length  
HDMI audio video cable 6 feet (1.8 m) length  
1-Year Extended Exchange Service Plan  
AV22300-03  
AV22300-06  
EPPSNVHTRE1  
Parent topic: Projector Features  
Warranty and Registration Information  
Your projector comes with a basic warranty that lets you project with confidence. For details, see the  
warranty brochure that came with your projector.  
In addition, Epson offers free Extra Care Home Service. In the unlikely event of an equipment failure,  
you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit  
anywhere in the United States, Canada, or Puerto Rico. See the Extra Care Home Service brochure for  
details.  
Register your product online at this site: epson.com/webreg  
Registering also lets you receive special updates on new accessories, products, and services.  
Parent topic: Projector Features  
14  
   
Notations Used in the Documentation  
Follow the guidelines in these notations as you read your documentation:  
Warnings must be followed carefully to avoid bodily injury.  
Cautions must be observed to avoid damage to your equipment.  
Notes contain important information about your projector.  
Tips contain additional projection information.  
Where to Go for Additional Information  
Need quick help on using your projector? Here's where to look for help:  
epson.com/support (U.S.) or epson.ca/support (Canada)  
View FAQs (frequently asked questions) and e-mail your questions to Epson technical support 24  
hours a day.  
• If you still need help after checking this manual and any other sources listed here, you can use the  
Epson PrivateLine Support service to get help fast. For details, see "Where to Get Help".  
Related references  
Projector Part Locations  
Check the projector part illustrations to learn about the parts on your projector.  
15  
     
Projector Parts - Front/Top  
1
2
3
4
5
6
7
8
9
Lamp cover  
A/V Mute slide lever  
Exhaust vent  
Lens cover  
Foot release lever  
Lens  
Remote control receiver  
Air filter/intake vent  
Air filter cover  
10 Focus slider  
11 Zoom slider  
12 Lens shift dial  
13 Horizontal keystone slider  
16  
 
14 Control panel  
Projector Parts - Rear  
1
AC input  
Speaker  
2
3
4
5
6
7
8
9
Remote control receiver  
Audio Out port  
HDMI 2 port  
HDMI 1 / MHL port  
PC port (VGA)  
Service port  
USB Type A port  
17  
 
Projector Parts - Base  
1
2
3
4
Ceiling mount holes (3)  
Security cable attachment point  
Rear feet  
Front adjustable foot  
18  
 
Projector Parts - Control Panel  
1
2
3
4
5
6
7
8
WLAN (Wireless LAN) light; non-functional for Home Cinema 2100  
Status light  
Power button  
Home button (displays the Home screen)  
Menu button (accesses projector menu system)  
Enter button (selects options)  
Esc button (cancels/exits functions)  
Vertical keystone adjustment buttons (displays the adjustment screen and adjusts screen shape)  
and arrow buttons  
9
Volume buttons (adjust speaker volume), horizontal keystone adjustment buttons (adjusts screen  
shape), and arrow buttons  
10 Source button (searches for connected video sources)  
19  
 
11 Temp (temperature) light  
12 Lamp light  
Related references  
Projector Parts - Remote Control  
20  
 
1
2
3
Power button  
Source buttons (select image source; LAN button is non-functional for the Home Cinema 2100)  
HDMI Link button (displays the settings menu for HDMI Link), Link Menu button (displays the  
main menu of the connected device), and control buttons (control playback and other features of  
connected devices that support the HDMI CEC standard)  
4
5
6
7
8
9
Menu button (accesses projector menu system)  
Arrow buttons (move through on-screen options)  
User button (customizable for different functions)  
Color Mode button (selects display modes)  
2D/3D button (cycles between 2D and 3D modes)  
3D Format button (changes the 3D format)  
10 Auto Iris button (optimizes the image based on brightness of content)  
11 Image Enh (enhancement) button (adjusts the noise, contrast, and texture of the projected image)  
12 Mute button (turns off sound only)  
13 Volume +/- buttons (adjust speaker volume)  
14 Esc button (cancels/exits functions)  
15 Enter button (selects options)  
16 Default button (returns selected setting to default value)  
17 Memory button (accesses the Memory menu)  
18 Frame Int (interpolation) button (adjusts the frame interpolation level)  
19 A/V Mute button (turns off picture and sound)  
20 Home button (displays the Home screen)  
21 Pattern button (displays a test pattern)  
21  
Setting Up the Projector  
Follow the instructions in these sections to set up your projector for use.  
Projector Placement  
You can place the projector on almost any flat surface to project an image.  
You can also install the projector in a ceiling mount if you want to use it in a fixed location.  
Keep these considerations in mind as you select a projector location:  
• Place the projector on a sturdy, level surface or install it using a compatible mount.  
• Leave plenty of space around and under the projector for ventilation, and do not place it on top of or  
next to anything that could block the vents.  
• Position the projector within reach of a grounded electrical outlet or extension cord.  
Projector Setup and Installation Options  
You can set up or install your projector in the following ways:  
Front  
22  
     
Rear  
Front Ceiling  
Rear Ceiling  
Wherever you set up the projector, make sure to position it squarely in front of the center of the screen,  
not at an angle, if possible.  
If you project from the ceiling or from the rear, be sure to select the correct Projection option in the  
projector's menu system.  
23  
Related references  
Projection Distance  
The distance at which you place the projector from the screen determines the approximate size of the  
image. The image size increases the farther the projector is from the screen, but can vary depending on  
the zoom factor, aspect ratio, and other settings.  
Use the tables here to determine approximately how far to place the projector from the screen based on  
the size of the projected image. (Conversion figures may have been rounded up or down.) You can also  
use the Projection Distance Calculator here (U.S.), here (Canada), or here (Caribbean).  
1
2
3
Projection distance  
Distance from the center of the lens to the base of the image  
Center of lens  
16:9 Aspect Ratio Image or Screen  
Screen or image size  
Projection distance (1)  
Offset from lens center (2)  
–1.6 to 2.76 inches (–4 to 7 cm)  
–2.0 to 4 inches (–5 to 10 cm)  
Wide to Tele  
60 inches  
69.3 to 112.6 inches  
(176 to 286 cm)  
92.5 to 150.4 inches  
(235 to 382 cm)  
80 inches  
24  
 
16:9 Aspect Ratio Image or Screen  
Screen or image size  
Projection distance (1)  
Offset from lens center (2)  
–2.4 to 4.7 inches (–6 to 12 cm)  
–3.5 to 7.5 inches (–9 to 19 cm)  
Wide to Tele  
100 inches  
116.1 to 188.2 inches  
(295 to 478 cm)  
150 inches  
174.4 to 283.1 inches  
(443 to 719 cm)  
Projector Connections  
See these sections to connect the projector to a variety of projection sources.  
Caution: If you will use the projector at altitudes above 4921 feet (1500 m), turn on High Altitude Mode  
to ensure the projector's internal temperature is regulated properly.  
Related references  
Connecting to Video Sources  
Follow the instructions in these sections to connect video devices to the projector.  
Connecting to an HDMI Video Source  
If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable.  
The HDMI connection provides the best image quality.  
25  
     
1. Connect the HDMI cable to your video source's HDMI output port.  
2. Connect the other end to one of the projector's HDMI ports.  
Note: The projector converts the digital audio signal sent from your video source into a mono analog  
signal for the internal speaker or a stereo analog signal if you are connecting to external speakers.  
Note: When an audio/video source that meets the HDMI CEC standard is connected to the projector's  
HDMI port, you can use the projector's remote control to control certain features of the linked device by  
pressing the HDMI Link button on the remote control and setting HDMI Link to On.  
Note: If you have problems hearing audio through the HDMI connection, make sure the Audio Out  
Device setting in the Extended menu is set correctly.  
Connecting to an MHL-Compatible Device  
If you have an MHL-compatible smartphone or tablet, you can connect it to the projector using either an  
MHL cable or an HDMI cable with a device-compatible MHL adapter. If you have a device with a built-in  
MHL connector, plug it directly into the HDMI 1/MHL port.  
Note: Some connected devices may not charge when using an MHL adapter.  
26  
 
1. Connect the MHL cable or adapter to your device's Micro-USB port.  
2. If you are using an MHL adapter, connect it to an MHL-compatible HDMI cable.  
3. Connect the other end of the cable to the projector's HDMI 1/MHL port.  
Note: The projector converts the digital audio signal sent from your video source into a mono analog  
signal for the internal speaker or a stereo analog signal if you are connecting to external speakers.  
Connecting to Computer Sources  
Follow the instructions in these sections to connect a computer to the projector.  
Connecting to a Computer for VGA Video  
You can connect the projector to your computer using a VGA computer cable.  
Note: To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for  
video output, you need to obtain an adapter that allows you to connect to the projector's VGA video port.  
Contact Apple for compatible adapter options.  
27  
   
1. If necessary, disconnect your computer's monitor cable.  
2. Connect the VGA computer cable to your computer's monitor port.  
3. Connect the other end to a PC port on the projector.  
4. Tighten the screws on the VGA connector.  
Related tasks  
Connecting to a Computer for HDMI Video and Audio  
If your computer has an HDMI port, you can connect it to the projector using an optional HDMI cable.  
Note: To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for  
video output, you need to obtain an adapter that allows you to connect to the projector's HDMI port.  
Contact Apple for compatible adapter options.  
1. Connect the HDMI cable to your computer's HDMI output port.  
28  
 
2. Connect the other end to one of the projector's HDMI ports.  
Note: The projector converts the digital audio signal sent from your computer into a mono analog signal  
for the internal speaker or a stereo analog signal if you are connecting to external speakers.  
Connecting to External Speakers or Headphones  
To enhance the sound from your presentation, you can connect the projector to external self-powered  
speakers or headphones. You can control the volume using the projector's remote control.  
You can also connect the projector to an amplifier with speakers.  
Note: The projector's built-in speaker system is disabled when you connect external speakers.  
1. Make sure your computer or video source is connected to the projector with both audio and video  
cables as necessary.  
2. Locate the appropriate cable to connect your external speakers, such as a stereo mini-jack-to-pin-  
jack cable, or another type of cable or adapter.  
3. Connect one end of the cable to your external speakers as necessary.  
29  
 
4. Connect the stereo mini-jack end of the cable to your projector's Audio Out port.  
Connecting to External USB Devices  
Follow the instructions in these sections to connect external USB devices to the projector.  
USB Device Projection  
You can project images and other content without using a computer or video device by connecting any of  
these devices to your projector:  
• USB flash drive  
• Digital camera or smartphone  
• USB hard drive  
• Multimedia storage viewer  
30  
   
Note: Digital cameras or smartphones must be USB-mounted devices, not TWAIN-compliant devices,  
and must be USB Mass Storage Class-compliant.  
Note: USB hard drives must meet these requirements:  
• USB Mass Storage Class-compliant (not all USB Mass Storage Class devices are supported)  
• Formatted in FAT or FAT32  
• Self-powered by their own AC power supplies (bus-powered hard drives are not recommended)  
• Does not have multiple partitions  
You can project slide shows from image files on a connected USB device.  
Connecting a USB Device or Camera to the Projector  
You can connect your USB device or camera to the projector's USB Type A port and use it to project  
images and other content.  
1. If your USB device came with a power adapter, plug the device into an electrical outlet.  
2. Connect the USB cable (or USB flash drive) to the projector's USB Type A port.  
Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not  
operate correctly.  
3. Connect the other end of the cable (if applicable) to your device.  
31  
 
Selecting the Connected USB Source  
You can switch the projector's display to the source you connected to the USB Type A port.  
1. Make sure the connected USB source is turned on, if necessary.  
2. Press the USB button on the remote control.  
Disconnecting a USB Device or Camera From the Projector  
When you finish presenting with a connected USB device or camera, you must prepare to disconnect the  
device from the projector.  
1. If the device has a power button, turn off and unplug the device.  
2. Disconnect the USB device or camera from the projector.  
Installing Batteries in the Remote Control  
The remote control uses the two AA batteries that came with the projector.  
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,  
or mix new and old batteries.  
1. Remove the battery cover.  
32  
     
2. Insert the batteries with the + and ends facing as shown.  
3. Replace the battery cover and press it down until it clicks into place.  
Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat  
or flame. Keep batteries out of the reach of children; they are choking hazards and are very  
dangerous if swallowed.  
33  
Opening the Lens Cover  
To open the projector's lens cover, slide the A/V Mute slide lever until it clicks into the open position.  
34  
 
Using the Projector on a Network  
Follow the instructions in these sections to set up your projector for use on a network.  
Related references  
Wireless Network Projection  
You can project over a wireless network. To do this, you must set up your projector and computer for  
wireless projection (Home Cinema 2150).  
After setting up the projector as described here, download the network software and manuals as  
necessary.  
Note: Wireless network connectivity is not recommended for video streaming.  
Using a QR Code to Connect a Mobile Device  
After you select the wireless network settings for your projector, you can display a QR code on the  
screen and use it to connect a mobile device using the Epson iProjection app (Home Cinema 2150).  
Note: Make sure you have installed the latest version of Epson iProjection on your device. Visit  
epson.com/iprojection (U.S.) or epson.ca/iprojection (Canada) for more information.  
1. Press the Menu button.  
35  
     
2. Select the Network menu and press Enter.  
3. Select Network Configuration and press Enter.  
4. Select the Basic menu and press Enter.  
5. Set the Display LAN Info setting to Text & QR Code.  
6. Select Complete and follow the on-screen instructions to save your settings and exit the menus.  
36  
7. Do one of the following:  
• Press the LAN button on the remote control.  
• Select Display the QR Code in the projector's Network menu.  
Your projector displays the QR code on the projection surface.  
Note: If you do not see the QR code after pressing the LAN button, press Enter to display it.  
8. Start Epson iProjection on your mobile device.  
9. Use the QR code reader feature to read the QR code and connect your device to the projector. Visit  
epson.com/iprojection (U.S.) or epson.ca/iprojection (Canada) for instructions.  
Selecting Wireless Network Settings Manually  
Before you can project from your wireless network, you must select the network settings for the projector  
using its menu system (Home Cinema 2150).  
1. Turn on the projector.  
2. Press the Menu button.  
3. Select the Network menu and press Enter.  
4. Make sure the Wireless LAN Power setting is set to On.  
37  
 
5. Select Network Configuration and press Enter.  
6. Select the Basic menu and press Enter.  
7. Select the following basic options as necessary:  
Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the  
projector over the network.  
Remote Password lets you enter a password up to 8 alphanumeric characters long for accessing  
the Remote or Basic Control screen in the Epson Web Control. (Default user name is  
EPSONREMOTE; default password is guest.)  
Display LAN Info lets you select how the projector displays network information. You can select  
an option to display a QR code that lets you quickly connect your iOS or Android devices using the  
Epson iProjection app.  
Note: Use the displayed keyboard to enter the name, passwords and keyword. Press the arrow  
buttons on the remote control to highlight characters and press Enter to select them.  
38  
8. Select the Wireless LAN menu and press Enter.  
9. Select the settings on the Wireless LAN menu as necessary for your network.  
10. When you finish selecting settings, select Complete and follow the on-screen instructions to save  
your settings and exit the menus.  
After you complete the wireless settings for your projector, you need to select the wireless network on  
your computer, or iOS or Android device.  
39  
Wireless LAN Menu Settings  
Setting  
Options  
Quick  
Description  
Connection Mode  
Selects the type of wireless  
connection:  
Advanced  
Quick: lets you quickly connect  
to one smartphone, tablet, or  
computer  
Advanced: lets you connect to  
multiple smartphones, tablets, or  
computers via a wireless network  
access point  
Channel  
SSID  
1ch  
Selects the frequency band  
(channel) used by the wireless  
LAN  
6ch  
11ch  
Up 32 alphanumeric characters Sets the SSID (network name) of  
the wireless LAN system the  
projector is connecting to  
Search Access Point  
IP Settings  
To Search View  
Searches for available wireless  
network access points  
Turns on DHCP if your network  
assigns addresses automatically;  
set to Off to manually enter the  
network's IP Address, Subnet  
Mask, and Gateway Address  
(see list of restricted IP  
addresses in link below)  
SSID Display  
On  
Off  
Selects whether to display the  
SSID on the network standby  
screen and the Home screen  
IP Address Display  
On  
Off  
Selects whether to display the IP  
address on the network standby  
screen and the Home screen  
40  
 
Note: You can select the Channel setting only when the Connection Mode setting is set to Quick. You  
can select the SSID, Search Access Point, and IP Settings only when the Connection Mode settings  
is set to Advanced.  
Related references  
Restricted IP Addresses  
When manually entering IP Settings, you cannot use these ranges of IP addresses:  
Setting  
Restricted IP addresses  
0.0.0.0  
IP Address  
127.x.x.x  
224.0.0.0 to 255.255.255.255  
0.0.0.0  
Subnet Mask  
255.255.255.255  
0.0.0.0  
Gateway Address  
197.x.x.x  
224.0.0.0 to 255.255.255.255  
Selecting Wireless Network Settings in Windows  
Before connecting to the projector, select the correct wireless network on your computer.  
1. To access your wireless utility software, access the Desktop and double-click the network icon on  
the Windows taskbar.  
2. Do one of the following:  
• If your projector is set up on an existing network (Advanced mode), select the network name  
(SSID).  
• If your projector is configured for Quick mode, select the projector's SSID.  
3. Click Connect.  
41  
   
Selecting Wireless Network Settings on Mac  
Before connecting to the projector, select the correct wireless network on your Mac.  
1. Click the AirPort icon on the menu bar at the top of the screen.  
2. Make sure AirPort is turned on, then do one of the following:  
• If your projector is set up on an existing network (Advanced mode), select the network name  
(SSID).  
• If your projector is configured for Quick mode, select the projector's SSID.  
Setting Up Wireless Network Security  
You can set up security for your projector to use on the wireless network (Home Cinema 2150). Set up  
one of the following security options to match the settings used on your network:  
• WPA/WPA2-PSK security (Advanced connection mode)  
• WPA2-PSK security (Advanced and Quick connection mode)  
Check with your network administrator for guidance on entering the correct information.  
1. Press the Menu button.  
2. Select the Network menu and press Enter.  
3. Select Network Configuration and press Enter.  
42  
   
4. Select the Security menu and press Enter.  
5. Select the security settings for your network.  
6. When you finish selecting settings, select Complete and follow the on-screen instructions to save  
your settings and exit the menus.  
Wireless Security Menu Settings  
Settings on the Security menu let you select the type of security and security settings that match the  
network you are connecting the projector to.  
Setting  
Options  
Description  
Security  
No  
Selects the type of security used  
on the wireless network  
WPA2-PSK  
WPA/WPA2-PSK  
Passphrase  
For the selected security, selects  
the pre-shared passphrase used  
on the network  
43  
 
Wireless Network Projection from a Mobile Device or Windows Computer  
(Screen Mirroring)  
You can send images to your projector from mobile devices such as laptops, smartphones, and tablets  
using Miracast technology or from a Windows computer (Home Cinema 2150). If your device supports  
Miracast, you do not need to install any additional software.  
Screen Mirroring Restrictions  
Note the following when using Screen Mirroring features (Home Cinema 2150):  
• You cannot project an interlaced image.  
• You cannot play audio with more than 3 channels.  
• You cannot project images with a resolution above 1920 × 1080 and a frame rate above 30 fps.  
• You cannot project 3D video.  
• You cannot use extended Miracast features on Windows 8.1.  
• You may not be able to view contents with copyright protection using a Miracast connection.  
Selecting Screen Mirroring Settings  
You can select Screen Mirroring settings for your projector and then project images from your mobile  
device or computer (Home Cinema 2150).  
1. Press the Menu button.  
44  
     
2. Select the Network menu and press Enter.  
3. Set the Screen Mirroring setting to On.  
4. Select Screen Mirroring Settings and press Enter.  
5. Select the Screen Mirroring Settings options as necessary.  
6. When you finish selecting settings, select Set and follow the on-screen instructions to save your  
settings and exit the menus.  
7. Press the Home button on the control panel or remote control.  
You see the Display Name you created on the Home screen.  
45  
Screen Mirroring Settings  
Setting  
Options  
Description  
Display Name  
Enter a name up to 32  
alphanumeric characters long to  
identify the projector from a list of  
available devices  
Operation Mode  
Basic  
Connect using either basic or  
detailed connection settings  
Extended  
1 to 4  
Adjust Image Quality  
Adjusts the balance between  
image speed and quality; higher  
values improve the speed and  
lower values improve the quality  
Extended  
Interrupt Connection  
Channel  
Additional settings that are  
available if you select Extended  
for the Operation Mode setting  
Interrupt Connection: allows  
users to switch the screen while  
projecting using Screen Mirroring  
Channel: selects the wireless  
channel to use for Screen  
Mirroring  
Connecting for Screen Mirroring with a Windows 8.x/Windows 10 Computer  
You can set up your computer to wirelessly project images and play sound using Screen Mirroring  
(Home Cinema 2150).  
1. Select the Screen Mirroring settings on your projector as necessary.  
2. Press the LAN button on the remote control to switch to the Screen Mirroring source.  
You see the Screen Mirroring standby screen.  
46  
   
3. Do one of the following:  
Windows 10: Open Action Center and select Connect.  
Windows 8.x: Select Devices > Project > Add a wireless display.  
4. Select your projector's Display Name from the list.  
5. If you see the PIN entry screen on your computer, enter the PIN code displayed on the Screen  
Mirroring standby screen or at the bottom right of the projected image.  
The projector displays the image from your computer or mobile device.  
Note: It may take some time to establish the connection. Do not disconnect the projector's power  
cord while it is connecting to your device. This may cause your device to freeze or malfunction.  
Connecting for Screen Mirroring with Miracast  
If your mobile device supports Miracast, you can connect it to the projector wirelessly and project images  
and sound (Home Cinema 2150).  
1. Select the Screen Mirroring settings on your projector as necessary.  
2. Press the LAN button on the remote control to switch to the Screen Mirroring source.  
You see the Screen Mirroring standby screen.  
3. On your mobile device, use the Miracast function to search for the projector.  
Note: See your mobile device's documentation for information on accessing the Miracast function.  
You see a list of available devices.  
4. Select your projector from the list.  
5. If you see the PIN entry screen on your mobile device, enter the PIN code displayed on the Screen  
Mirroring standby screen or at the bottom right of the projected image.  
The projector displays the image from your mobile device.  
Caution: It may take some time to establish the connection. Do not disconnect the projector's power  
cord while it is connecting to your device. Doing so may cause your device to freeze or malfunction.  
47  
 
Note: Depending on the mobile device, you may need to delete a device when connecting. Follow  
the on-screen instructions on your device.  
48  
1. Open the projector's lens cover.  
2. Connect the power cord to the projector's power inlet.  
50  
3. Plug the power cord into an electrical outlet.  
Note: With Direct Power On turned on, the projector turns on as soon as you plug it in.  
4. Press the power button on the projector or the remote control to turn on the projector.  
The status light flashes blue as the projector warms up. Once the projector is warmed up, the status  
light stops flashing and turns blue.  
Warning: Never look into the projector lens when the lamp is on. This can damage your eyes and is  
especially dangerous for children.  
If you do not see a projected image right away, try the following:  
• Verify the lens cover is open all the way.  
• Turn on the connected computer or video device.  
• Insert a DVD or other video media and press the play button, if necessary.  
• Press the button for the video source on the remote control.  
• Press the Source button on the projector to detect the video source, or press a source button on the  
remote control.  
• If the Home screen is displayed, select the source you want to project.  
Related tasks  
Using the Home Screen  
You can select input sources and other frequently used options from the Home screen.  
1. To display the Home screen, do one of the following:  
• Press the Home button on the control panel or remote control.  
• Turn on the projector with the Home Screen Auto Disp setting enabled.  
• Turn on the projector when no signal is received from the selected input source.  
51  
 
2. Press the arrow buttons on the remote control or control panel to navigate the screen, and press  
Enter to select an option.  
1
2
3
4
5
6
Select the video source you want to project  
Display the Connection Guide (Home Cinema 2150)  
Display the projector's menus  
Select customizable menu options  
Select to change the 3D settings  
Select to change the Color Mode  
Note: Your Home screen may look different from the illustration shown here. You can select the  
customizable menu options using the Custom Function 1 and Custom Function 2 settings in the  
Extended menu.  
3. Press the Home button to hide the Home screen.  
52  
Related references  
Turning Off the Projector  
Before turning off the projector, shut down any computer connected to it so you can see the computer  
display during shutdown.  
Note: Turn off this product when not in use to prolong the life of the projector. Lamp life will vary  
depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.  
Note: When using the A/V Mute feature, the projector lamp is still on. To turn off the lamp, turn off the  
projector.  
1. Press the power button on the projector or the remote control.  
The projector displays a shutdown confirmation screen.  
2. Press the power button again. (To leave it on, press any other button.)  
The projector beeps twice, the lamp turns off, and the status light turns off.  
Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the  
projector for transport right away (if necessary).  
Caution: Do not turn the projector on immediately after turning it off. Turning the projector on and off  
frequently may shorten the life of the lamp.  
53  
 
3. To transport or store the projector, make sure status light is off, then unplug the power cord.  
Caution: To avoid damaging the projector or lamp, never unplug the power cord when the status  
light is on or flashing.  
54  
4. Close the projector's lens cover.  
Related references  
Viewing 3D Images  
You can view 3D images using your projector. Viewing 3D images requires a 3D-compatible video  
device, a compatible HDMI cable, and a pair of Epson RF 3D glasses (not included with your projector).  
You can also convert 2D images to 3D using the 2D-to-3D Conversion setting in your projector's  
Signal > 3D Setup menu.  
You can purchase Epson RF 3D glasses from an Epson authorized reseller. To find the nearest reseller,  
call 800-GO-EPSON (800-463-7766) in the U.S. or 800-807-7766 in Canada. Or you can purchase  
online at epsonstore.com (U.S. sales) or epsonstore.ca (Canadian sales).  
1. Connect a 3D-compatible video device to the projector using a compatible HDMI cable.  
2. Turn on the video device, then turn on the projector.  
3. Begin playback from the video device.  
Note: Make sure you set the video device to play content in 3D mode.  
55  
 
4. Press the 2D/3D button on the remote control to activate 3D mode, if necessary.  
5. Slide the power switch on the 3D glasses to the On position.  
6. Put on the 3D glasses and view the projected image. If you do not see a 3D image, pair the glasses  
with the projector.  
Note: If you change the video source or you are not within range of your projector, the glasses enter  
standby mode and the status light flashes green. Slide the power switch on the glasses to the Off  
position and then back to the On position to resume 3D viewing.  
Note: Make sure you are within 32 ft (10 m) of the projector when using the 3D glasses or you may  
lose your connection.  
Pairing the 3D Glasses with the Projector  
Pair the glasses with the projector to establish communication between them for 3D viewing.  
1. Turn on the projector.  
56  
 
2. Set the image source on the projector to HDMI.  
3. Project a 3D image.  
4. Slide the power switch on the 3D glasses to the On position.  
5. Move the glasses within 10 feet (3 m) of the projector and hold down the Pairing button for at least  
three seconds.  
The status light on the glasses flashes green and red. If pairing is successful, the light turns green  
for 10 seconds and then turns off.  
Parent topic: Viewing 3D Images  
Charging the 3D Glasses  
Charge the glasses when the status light on the glasses flashes red to indicate a low battery.  
57  
 
1. Connect the smaller end of the charging cable to the port on the bridge of the glasses.  
Note: Make sure you connect the cable in the correct orientation or you may damage the glasses or  
cable.  
2. Connect the other end of the cable to the USB Type A port on the projector or any other device such  
as a computer that has an active USB Type A port.  
Note: The projector must be turned on to charge the glasses.  
The glasses are fully charged when the status light on the glasses stays green.  
Parent topic: Viewing 3D Images  
Selecting the Language for the Projector Menus  
If you want to view the projector's menus and messages in another language, you can change the  
Language setting.  
1. Turn on the projector.  
2. Press the Menu button.  
58  
 
3. Select the menu and press Enter.  
4. Select the Language setting and press Enter.  
5. Select the language you want to use and press Enter.  
6. Press Menu or Esc to exit the menus.  
Adjusting the Image Height  
If you are projecting from a table or other flat surface, and the image is too high or low, you can adjust  
the image height using the projector's adjustable feet.  
1. Turn on the projector and display an image.  
59  
 
2. To adjust the front foot, pull up on the foot release lever and lift the front of the projector.  
The foot extends from the projector.  
3. Release the lever to lock the foot.  
4. If the image is tilted, rotate the rear feet to adjust their height.  
If the projected image is unevenly rectangular, you need to adjust the image shape.  
Adjusting the Image Position Using Lens Shift  
If you cannot install the projector directly in front of the screen, you can adjust the position of the  
projected image using the lens shift feature.  
60  
 
Follow these guidelines when using lens shift to adjust your images:  
• When adjusting the image height, position the image lower than where you want it to be and then  
move it up using the vertical lens shift dial. This helps prevent the image from moving down after  
adjustment.  
• Keep the vertical and horizontal lens shift dials in their center positions for the clearest picture.  
Note: Wait 30 minutes after turning on the projector before setting the focus, zoom, and lens shift for  
maximum accuracy.  
1. Turn on the projector and display an image.  
2. Turn the vertical lens shift dial on the projector to adjust the position of the projected image as  
necessary.  
Image Shape  
You can project an evenly rectangular image by placing the projector directly in front of the center of the  
screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off  
to the side, you may need to correct the image shape for the best display quality.  
61  
 
When you turn on automatic keystone correction in your projector's Settings menu, your projector  
automatically corrects vertical keystone effects when you reposition the projector.  
Correcting Image Shape with the Horizontal Keystone Slider  
You can use the projector's horizontal keystone slider to correct the shape of an image that is unevenly  
rectangular horizontally, such as when the projector is placed to the side of the projection area.  
Note: To provide the best possible image quality, adjust the projector's position to correct the image  
shape. If this isn't possible, use the horizontal keystone slider on the projector to correct the image  
shape.  
1. Turn on the projector and display an image.  
Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.  
Note: You can also display the pattern by pressing the Pattern button on the remote control.  
2. Adjust the slider until the image is evenly rectangular.  
After correction, your image is slightly smaller.  
Parent topic: Image Shape  
62  
 
Correcting Image Shape with the Keystone Buttons  
You can use the projector's keystone correction buttons to correct the shape of an image that is  
unevenly rectangular on the sides.  
1. Turn on the projector and display an image.  
Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.  
Note: You can also display the pattern by pressing the Pattern button on the remote control.  
2. Press one of these keystone buttons on the control panel to display the Keystone adjustment  
screen.  
3. Press a keystone button on the projector's control panel to adjust the image shape.  
63  
 
After correction, your image is slightly smaller.  
Note: If the projector is installed out of reach, you can also correct the image shape with the remote  
control using the H/V-Keystone settings in the projector menus.  
Parent topic: Image Shape  
Related references  
Correcting Image Shape with Quick Corner  
You can use the projector's Quick Corner setting to correct the shape and size of an image that is  
unevenly rectangular on all sides.  
1. Turn on the projector and display an image.  
Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.  
Note: You can also display the pattern by pressing the Pattern button on the remote control.  
2. Press the Menu button.  
64  
 
3. Select the Settings menu and press Enter.  
4. Select the Keystone setting and press Enter.  
5. Select the Quick Corner setting and press Enter. Then press Enter again.  
You see the Quick Corner adjustment screen:  
Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a  
reset screen. Then select Yes.  
65  
6. Use the arrow buttons on the projector or the remote control to select the corner of the image you  
want to adjust. Then press Enter.  
7. Press the arrow buttons to adjust the image shape as necessary.  
8. When you are finished, press Esc.  
Parent topic: Image Shape  
Resizing the Image with the Zoom Slider  
1. Turn on the projector and display an image.  
Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.  
Note: You can also display the pattern by pressing the Pattern button on the remote control.  
2. To enlarge or reduce the image size, adjust the zoom slider.  
Focusing the Image Using the Focus Slider  
1. Turn on the projector and display an image.  
Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.  
66  
   
Note: You can also display the pattern by pressing the Pattern button on the remote control.  
2. To sharpen the image focus, adjust the focus slider.  
Remote Control Operation  
The remote control lets you control the projector from almost anywhere in the room. You can point it at  
the screen, or the front or back of the projector.  
Make sure that you aim the remote control at the projector's receivers within the distance and angles  
listed here.  
67  
 
Vertical  
1
2
15°  
19.7 feet (6 m)  
Horizontal  
1
30°  
68  
2
19.7 feet (6 m)  
Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or  
the projector may not respond to commands. If you will not use the remote control for a long time,  
remove the batteries.  
Selecting an Image Source  
If you connected multiple image sources to the projector, such as a computer and DVD player, you may  
want to switch from one image source to the other.  
Note: If you turned on the Auto Source Search setting in the Extended menu, the projector  
automatically switches to another detected image source if the signal to the current image source is lost.  
1. Make sure the connected image source you want to use is turned on.  
2. For video image sources, insert a DVD or other video media and press its play button, if necessary.  
3. Do one of the following:  
• Press the Source button on the projector until you see the image from the source you want.  
69  
 
• Press the button for the source you want on the remote control.  
1
2
3
4
HDMI port sources  
Network source (LAN)  
USB port sources (computer display and external devices)  
Computer port sources  
• Press the Home button on the remote control or projector and select your image source.  
70  
Projection Modes  
Depending on how you positioned the projector, you may need to change the projection mode so your  
images project correctly.  
Front (default setting) lets you project from a table in front of the screen.  
Front/Ceiling flips the image over top-to-bottom to project upside-down from a ceiling or wall mount.  
Rear flips the image horizontally to project from behind a translucent screen.  
Rear/Ceiling flips the image over top-to-bottom and horizontally to project from the ceiling and behind  
a translucent screen.  
Changing the Projection Mode Using the Remote Control  
You can change the projection mode to flip the image over top-to-bottom.  
1. Turn on the projector and display an image.  
2. Hold down the button on the remote control for 5 to 10 seconds.  
The image disappears briefly and reappears flipped top-to-bottom.  
3. To change projection back to the original mode, hold down the button for 5 to 10 seconds again.  
Parent topic: Projection Modes  
Changing the Projection Mode Using the Menus  
You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the  
projector menus.  
1. Turn on the projector and display an image.  
2. Press the Menu button.  
71  
     
3. Select the Extended menu and press Enter.  
4. Select the Projection setting and press Enter.  
5. Select a projection mode and press Enter.  
6. Press Menu or Esc to exit the menus.  
Parent topic: Projection Modes  
Image Aspect Ratio  
The projector can display images in different width-to-height ratios called aspect ratios. Normally the  
input signal from your video source determines the image's aspect ratio. However, for certain images  
you can change the aspect ratio to fit your screen by pressing a button on the remote control.  
If you always want to use a particular aspect ratio for a certain video input source, you can select it using  
the projector's menus.  
Changing the Image Aspect Ratio  
You can change the aspect ratio of the displayed image to resize it.  
Note: For HDMI sources, the input signal determines the image's aspect ratio.  
72  
   
1. Turn on the projector and switch to the image source you want to use.  
2. Press the Menu button.  
3. Select the Signal menu and press Enter.  
4. Select Aspect and press Enter.  
5. Select the aspect ratio you want to use for your input signal and press Enter.  
6. Press Menu or Esc to exit the menus.  
Parent topic: Image Aspect Ratio  
Related references  
Available Image Aspect Ratios  
You can select the following image aspect ratios, depending on the input signal from your image source.  
Note: When the projector is in 3D mode or projecting in Full HD resolution via an HDMI connection, the  
aspect ratio is automatically set to Normal.  
Note: Black bands and cropped images may project in certain aspect ratios, depending on the aspect  
ratio and resolution of your input signal.  
73  
 
Aspect ratio setting  
Auto  
Description  
Automatically sets the aspect ratio according to the input signal.  
Normal  
Displays images using the full projection area and maintains the  
aspect ratio of the image.  
Zoom  
Full  
Displays images using the full width of the projection area and  
maintains the aspect ratio of the image.  
Displays images using the full width of the projection area, but does  
not maintain the aspect ratio.  
Note: The Auto aspect ratio setting is available only for HDMI computer connections.  
Parent topic: Image Aspect Ratio  
Color Mode  
The projector offers different Color Modes to provide optimum brightness, contrast, and color for a  
variety of viewing environments and image types. You can select a mode designed to match your image  
and environment, or experiment with the available modes.  
If you always want to use a particular color mode for a certain video input source, you can select it using  
the projector menus.  
Changing the Color Mode  
You can change the projector's Color Mode using the remote control to optimize the image for your  
viewing environment.  
1. Turn on the projector and switch to the image source you want to use.  
2. If you are projecting from a DVD player or other video source, insert a disc or other video media and  
press the play button, if necessary.  
74  
   
3. Press the Color Mode button on the remote control to change the Color Mode.  
The image appearance changes and the name of the Color Mode appears briefly on the screen.  
4. To cycle through all the available Color Modes for your input signal, press the Color Mode button  
repeatedly.  
Parent topic: Color Mode  
Available Color Modes  
You can set the projector to use these Color Modes, depending on the input source you are using:  
2D Images  
Color Mode  
Dynamic  
Description  
Best for projecting in a bright room  
Best for projecting in a dark room  
Best for projecting in a room with closed curtains  
Best for projecting color movies in a dark room  
Natural  
Bright Cinema  
Cinema  
3D Images  
Color Mode  
3D Dynamic  
3D Cinema  
Description  
Best for projecting in a bright room  
Best for projecting movies in a dark room  
Parent topic: Color Mode  
75  
 
Turning On Auto Iris  
In certain color modes, you can turn on the Auto Iris setting to automatically optimize the image based on  
the brightness of the content you project.  
1. Turn on the projector and switch to the image source you want to use.  
2. Press the Menu button.  
3. Select the Image menu and press Enter.  
4. Select the Auto Iris setting and choose one of the following:  
High Speed to adjust brightness as soon as the scene changes.  
Normal for standard brightness adjustment.  
Note: You can set Auto Iris for each Color Mode that supports the feature.  
5. Press Menu or Esc to exit the menus.  
Parent topic: Color Mode  
Related references  
76  
 
Controlling the Volume with the Volume Buttons  
You can use the Volume buttons on the projector or the remote control to adjust the volume as you  
project a presentation with audio. The volume buttons control the projector’s internal speaker system or  
any external speakers you connected to the projector.  
You must adjust the volume separately for each connected input source.  
1. Turn on the projector and start a presentation that includes audio.  
2. To lower or raise the volume, press the Volume buttons on the remote control or these buttons on  
the control panel.  
A volume gauge appears on the screen.  
3. To set the volume to a specific level for an input source, use the projector menus.  
Related references  
Projecting a Slide Show  
You can use your projector's Slideshow feature whenever you connect a USB device that contains  
compatible files. This lets you quickly and easily display the contents of the files and control their display  
using the projector's remote control.  
77  
   
Related topics  
Supported Slideshow File Types  
You can project these types of files using the projector's Slideshow feature.  
Note: For best results, place your files on media that is formatted in FAT16/32. If you have trouble  
projecting from media formatted for non-Windows file systems, try formatting the media for Windows  
instead. You may not be able to use the security features on certain USB storage devices with  
Slideshow features. When connecting a USB-compatible hard drive, connect the AC adapter supplied  
with the drive.  
File type and  
extension  
Details  
Image (.jpg)  
Make sure the file is not:  
• CMYK format  
• Progressive format  
• Highly compressed  
• Above 8192 × 8192 resolution  
Slideshow Features  
Your projector's Slideshow feature lets you do the following:  
• Display individual images  
• Present a slide show of all images in a folder  
Starting a Slide Show  
After connecting a USB device to the projector, you can switch to the USB input source and start your  
slide show.  
Note: You can change the Slideshow operation options or add special effects by highlighting Option at  
the bottom of the screen and pressing Enter.  
78  
     
1. Press the USB button on the projector remote control.  
The Slideshow screen appears.  
2. Do the following as necessary to locate your files:  
• If you need to display files inside a subfolder on your device, press the arrow buttons to highlight  
the folder and press the Enter button.  
• To move back up a folder level on your device, highlight Back to Top and press Enter.  
• To view additional images in a folder, highlight Next page or Previous page and press Enter.  
3. Do one of the following to start your slide show:  
• To display an individual image, press the arrow buttons to highlight the image and press Enter.  
(Press the Esc button to return to the file list screen.)  
• To display a slide show of all the images in a folder, press the arrow buttons to highlight the  
Slideshow option at the bottom of the screen and press Enter.  
Note: If any file names are longer than 8 characters or include unsupported symbols, the file names  
may be shortened or changed only in the screen display.  
4. While projecting, use the following commands to control the display as necessary:  
• To rotate a displayed image, press the up or down arrow button.  
• To move to the next or previous image, press the left or right arrow button.  
79  
5. To stop the display, follow the on-screen instructions or press the Esc button.  
Related tasks  
Slideshow Display Options  
You can select these display options when using the projector's Slideshow feature.  
Setting  
Options  
Description  
Display Order  
Name Order  
Date Order  
In Ascending  
In Descending  
On  
Displays files in name order  
Displays files in date order  
Sorts files in first-to-last order  
Sorts files in last-to-first order  
Displays a slide show continuously  
Displays a slide show one time through  
Sort Order  
Continuous Play  
Off  
80  
 
Setting  
Options  
Description  
Screen Switching  
Time  
No  
Does not display the next file automatically  
1 Second to 60 Seconds  
Displays files for the selected time and  
switches to the next file automatically; high  
resolution images may switch at a slightly  
slower rate  
Effect  
Wipe  
Transitions between images with a wipe effect  
Dissolve  
Transitions between images with a dissolve  
effect  
Random  
Transitions between images using a random  
variety of effects  
81  
Adjusting Projector Features  
Follow the instructions in these sections to use your projector's feature adjustments.  
Shutting Off the Picture and Sound Temporarily  
You can temporarily turn off the projected picture and sound if you want to redirect your audience's  
attention during a presentation. Any sound or video action continues to run, however, so you cannot  
resume projection at the point that you stopped it.  
1. Press the A/V Mute button on the remote control to temporarily stop projection and mute any sound.  
Note: To mute only the audio, press the Mute button on the remote control.  
2. To turn the picture and sound back on, press the A/V Mute button again.  
Note: You can also stop projection using the A/V Mute slide lever on the projector.  
Projecting Two Images Simultaneously  
You can use the split screen feature to simultaneously project two images from different image sources  
(HDMI1/HDMI2 and Screen Mirroring) next to each other (Home Cinema 2150). You can control the split  
screen feature using the projector menus.  
82  
     
Note: While you use the split screen feature, other projector features may not be available and some  
settings may be automatically applied to both images.  
Note: You cannot project from the same input source onto both sides (left and right) of the screen. You  
also cannot use split screen with 3D images or certain input source combinations.  
1. Press the Menu button.  
2. Select the Settings menu and press Enter.  
3. Select Split Screen and press Enter.  
Images from the HDMI1 or HDMI2 source are projected on the left side of the screen, and images  
from Screen Mirroring are projected on the right side of the screen. (These are the only sources that  
can be split.)  
4. Press the Menu button on the remote control to change the Split Screen Settings.  
You see this screen:  
83  
5. To change the size and orientation of the image sent by Screen Mirroring, select the Screen Right  
Format setting, press Enter, select size and orientation options, press Enter, and press Menu to  
exit. (The image sent by Screen Mirroring is always on the right side.)  
6. To choose the audio you want to hear, select the Audio Source setting, press Enter, select an  
audio option, press Enter, and press Menu to exit.  
7. To exit the split screen feature, select Exit Split Screen or press the Esc button.  
Projector Security Features  
You can secure your projector to deter theft or prevent unintended use by setting up the following  
security features:  
• Button lock security to block operation of the projector using the buttons on the control panel.  
• Security cabling to physically cable the projector in place.  
Locking the Projector's Buttons  
You can lock the buttons on the projector's control panel to prevent anyone from using the projector.  
1. Press the Menu button.  
2. Select the Settings menu and press Enter.  
84  
   
3. Select the Lock Setting setting and press Enter.  
4. Select one of these lock types and press Enter:  
• To lock the projector's power button, select Child Lock. To turn the projector on, you must press  
the power button for longer than three seconds.  
Note: Child Lock does not prevent the projector from turning on when the power cord is  
connected and the Direct Power On Setting is set to On.  
• To lock all buttons, select Control Panel Lock > Full Lock.  
• To lock all buttons except the power button, select Control Panel Lock > Partial Lock.  
Note: The lock icon is displayed on the screen if any control panel buttons are pressed while  
this setting is enabled.  
You see a confirmation prompt.  
5. Select Yes and press Enter.  
6. Restart the projector for the lock settings to take effect.  
Related references  
Unlocking the Projector's Buttons  
If the projector's buttons have been locked, hold the Enter button on the projector's control panel for  
seven seconds to unlock them. You can also set the Control Panel Lock setting to Off in the Settings  
menu.  
Related references  
Installing a Security Cable  
You can install two types of security cables on the projector to deter theft.  
• Use the security slot on the projector to attach a Kensington lock. See your local computer or  
electronics dealer for purchase information.  
85  
   
• Use the security cable attachment point on the projector to attach a wire cable and secure it to a room  
fixture or heavy furniture.  
Note: Do not pass drop-prevention cables through the security cable attachment point when mounting  
the projector on a wall or ceiling.  
Related references  
Saving Settings to Memory and Using Saved Settings  
You can save customized settings and then select the saved settings whenever you want to use them.  
1. Turn on the projector and display an image.  
2. Press the Menu button.  
86  
 
3. Select the Settings menu and press Enter.  
4. Select the Memory setting and press Enter.  
Note: You can also access this screen by pressing the Memory button on the remote control.  
5. Select one of the following options:  
Load Memory: Overwrites your current settings with saved settings  
Save Memory: Saves your current settings to memory  
Note: A memory name that has already been used is indicated by a mark. Saving over a  
previously saved memory overwrites the settings with your current settings.  
Erase Memory: Erases the selected memory settings  
Rename Memory: Renames a saved memory  
6. Press Menu or Esc to exit.  
87  
88  
Adjusting the Menu Settings  
Follow the instructions in these sections to access the projector menu system and change projector  
settings.  
Using the Projector's Menus  
You can use the projector's menus to adjust the settings that control how your projector works. The  
projector displays the menus on the screen.  
1. Press the Menu button on the control panel or remote control.  
89  
   
You see the menu screen displaying the Image menu settings.  
2. Press the up or down arrow button to move through the menus listed on the left. The settings for  
each menu are displayed on the right.  
Note: The available settings depend on the current input source.  
3. To change settings in the displayed menu, press Enter.  
4. Press the up or down arrow button to move through the settings.  
5. Change the settings using the buttons listed on the bottom of the menu screens.  
6. To return all the menu settings to their default values, select Reset.  
7. When you finish changing settings on a menu, press Esc.  
8. Press Menu or Esc to exit the menus.  
90  
Image Quality Settings - Image Menu  
Settings on the Image menu let you adjust the quality of your image for the input source you are currently  
using. The available settings depend on the currently selected input source and resolution.  
To change settings for an input source, make sure the source is connected and select that source.  
Setting  
Options  
Description  
Color Mode  
See the list of available Color  
Modes  
Adjusts the vividness of image  
colors for various image types  
and environments  
Brightness  
Contrast  
Varying levels available  
Varying levels available  
Varying levels available  
Varying levels available  
Varying levels available  
Lightens or darkens the overall  
image  
Adjusts the difference between  
light and dark areas of the image  
Color Saturation  
Tint  
Adjusts the intensity of the image  
colors  
Adjusts the balance of green to  
magenta tones in the image  
Sharpness  
Adjusts the sharpness or  
softness of image details  
91  
 
Setting  
Options  
Description  
Color Temp. (color temperature) Varying levels available  
Sets the overall color tone;  
Higher values tint the image blue  
and lower values tint the image  
red  
Frame Interpolation  
Image Enhancement  
Off  
Smooths fast moving video by  
comparing consecutive frames  
and inserting an intermediate  
frame between them  
Weak  
Normal  
Strong  
Image Preset Mode  
Selects the image enhancement  
settings saved in advance  
Noise Reduction  
MPEG Noise Reduction  
Detail Enhancement  
Gamma  
Reduces flickering in analog  
images in two levels  
Reduces the noise or artifacts  
seen in MPEG video  
Enhances details to create clear  
outlines  
Advanced  
Adjusts the gamma levels of the  
image  
RGBCMY  
Adjusts the hue, saturation, and  
brightness for each color  
Epson Super White  
Reduces over-exposure of whites  
in your image  
Power Consumption  
Auto Iris  
Normal  
ECO  
Adjusts the brightness level,  
power usage, and fan noise  
Off  
Adjusts the projected luminance  
based on the image brightness  
when certain Color Modes are  
selected  
Normal  
High Speed  
Note: The Brightness setting does not affect lamp brightness. To change the lamp brightness mode,  
use the Power Consumption setting.  
92  
Note: You can select the Frame Interpolation and Noise Reduction settings only when the Image  
Processing setting is set to Fine.  
Input Signal Settings - Signal Menu  
Normally the projector detects and optimizes the input signal settings automatically. If you need to  
customize the settings, you can use the Signal menu. The available settings depend on the currently  
selected input source.  
To change settings for an input source, make sure the source is connected and select that source.  
93  
 
Setting  
Options  
Description  
3D Setup  
3D Display  
Enables 3D mode  
Selects the 3D format  
3D Format  
2D-to-3D Conversion  
Converts 2D images to 3D  
images  
3D Depth  
Sets the depth for the 3D image  
Diagonal Screen Size  
Selects the actual size of the  
screen to maximize the 3D effect  
3D Brightness  
Adjusts the brightness of the 3D  
image  
Inverse 3D Glasses  
Reverses the images projected  
for the left and right eyes (enable  
only if 3D images are not  
displaying correctly)  
3D Viewing Notice  
Enables the viewing notice  
displayed when 3D mode is  
activated  
Aspect  
Tracking  
Sync.  
See the list of available aspect  
ratios  
Sets the aspect ratio (width-to-  
height ratio) for the selected input  
source  
Varying levels available  
Varying levels available  
Up, down, left, right  
Adjusts signal to eliminate  
vertical stripes in computer  
images  
Adjusts signal to eliminate  
fuzziness or flickering in  
computer images  
Position  
Adjusts the image location on the  
screen  
Auto Setup  
On  
Off  
Automatically optimizes  
computer image quality (when  
On)  
94  
Setting  
Options  
Description  
Overscan  
Auto  
Changes the projected image  
ratio to make the edges visible by  
a selectable percentage or  
automatically  
Off  
4%  
8%  
Advanced  
HDMI Video Range  
Sets the video range to match  
the setting of the device  
connected to the HDMI input port  
Auto: detects the video range  
automatically  
Normal: for images from a  
device other than a computer;  
can also be selected if the black  
areas of the image are too bright  
Expanded: for images from a  
computer; can also be selected if  
the image is too dark  
Image Processing  
Adjusts how images are  
processed  
Fast: displays images more  
quickly  
Fine: displays images in higher  
quality  
Note: If you notice 3D crosstalk when watching 3D images, select Normal as the HDMI Video Range  
setting.  
95  
Projector Feature Settings - Settings Menu  
Options on the Settings menu let you customize various projector features.  
Setting  
Options  
Description  
Keystone  
H/V-Keystone  
Quick Corner  
Adjusts image shape to  
rectangular (horizontally and  
vertically)  
H/V-Keystone: lets you manually  
correct horizontal and vertical  
sides; turn on or off Auto V-  
Keystone and the H-Keystone  
Adjuster setting  
Quick Corner: select to correct  
image shape and alignment  
using an on-screen display  
Split Screen  
Splits the screen in two and  
displays images from the HDMI  
source and the Screen Mirroring  
source simultaneously  
(Home Cinema 2150)  
96  
 
Setting  
Volume  
Options  
Description  
Varying levels available  
Adjusts the volume of the  
projector’s speaker system or  
external device connected to the  
Audio Out port  
HDMI Link  
Device Connections  
HDMI Link  
Adjusts the HDMI Link options  
that allow the projector remote to  
control HDMI-connected devices  
that support the CEC standard  
Audio Out Device  
Power On Link  
Power Off Link  
Device Connections: lists the  
devices connected to the HDMI 1  
and HDMI 2 ports  
HDMI Link: enables or disables  
the HDMI Link function  
Audio Out Device: selects  
whether to output audio from the  
internal speakers or a connected  
audio/video system  
Power On Link: controls the  
projector or a linked device  
PJ -> Device or Bidirectional:  
turns on the linked device  
when the projector is turned on  
Device -> PJ or Bidirectional:  
turns on the projector when the  
linked device is turned on  
Power Off Link: controls  
whether linked devices are  
turned off when the projector is  
turned off  
97  
Setting  
Options  
Description  
Lock Setting  
Child Lock  
Controls projector button locking  
to secure the projector  
Control Panel Lock  
Child Lock: locks the power  
button  
Control Panel Lock:  
Full Lock: locks all buttons  
Partial Lock: locks all buttons  
except the power button  
User Button  
Fine/Fast  
Assigns a menu option to the  
User button on the remote  
control for one-touch access  
2D-to-3D Conversion  
Power Consumption  
Brightness Control  
Info  
Display the QR Code (Home  
Cinema 2150)  
Memory  
Load Memory  
Save Memory  
Erase Memory  
Rename Memory  
Controls memory functions for  
current projector settings  
Load Memory: lets you load a  
saved memory  
Save memory: lets you save  
current projector settings to  
memory  
Erase Memory: lets you delete a  
saved memory  
Rename Memory: lets you  
rename a saved memory using 9  
predetermined name types or up  
to 12 characters in a customized  
name  
Note: Turning off your input devices will not power down the projector even if you select On as the  
Power Off Link setting.  
98  
Projector Setup Settings - Extended Menu  
Settings on the Extended menu let you customize various projector setup features that control its  
operation.  
Setting  
Options  
Description  
Home Screen  
Home Screen Auto Disp.  
Custom Function 1  
Custom Function 2  
Selects various options for the  
projector's Home screen  
Home Screen Auto Disp.:  
controls whether the Home  
screen displays automatically  
when the projector is turned on  
Custom Function 1/Custom  
Function 2: lets you customize  
the options displayed on the  
Home screen and save your  
settings as a preset  
99  
 
Setting  
Display  
Options  
Description  
Messages  
Selects various display options  
Display Background  
Startup Screen  
Messages: controls whether  
messages are displayed on the  
screen  
Display Background: selects  
the screen color or logo to  
display when no signal is  
received  
Startup Screen: controls  
whether a special screen  
appears when the projector  
starts up  
Projection  
Operation  
Front  
Selects the way the projector  
faces the screen so the image is  
oriented correctly  
Front/Ceiling  
Rear  
Rear/Ceiling  
Direct Power On  
Turns on the projector when you  
plug it in  
Sleep Mode  
Automatically places the  
projector in standby mode after  
an interval of inactivity  
Sleep Mode Timer  
Illumination  
Sets the interval for sleep mode  
(1 to 30 minutes)  
Turns off the power and status  
lights on the projector  
High Altitude Mode  
Regulates the projector’s  
operating temperature at  
altitudes above 4921 feet  
(1500 m)  
Auto Source Search  
Detects the input signal  
automatically  
100  
Setting  
Options  
Description  
Standby Mode  
(Home Cinema 2150)  
Communication Off  
Communication On  
Selects whether or not the  
projector can be monitored over  
a network when it is in standby  
mode  
Language  
Various languages available  
Selects the language for  
projector menu and message  
displays (not changed by Reset  
option)  
Projector Network Settings - Network Menu  
Settings on the Network menu let you view network information and set up the projector for monitoring  
and control over a network (Home Cinema 2150).  
Setting  
Options  
On  
Description  
Screen Mirroring  
Turns on screen mirroring mode  
Off  
101  
 
Setting  
Options  
Description  
Screen Mirroring Info  
Display Name  
MAC Address  
Region Code  
Channel  
Displays screen mirroring status  
and details  
Connected Device  
Display Name  
Operation Mode  
Adjust Image Quality  
Extended  
Screen Mirroring Settings  
Configures your screen mirroring  
settings; only available when  
Screen Mirroring is On  
Reset  
Wireless LAN Power  
On  
Turns on wireless LAN mode  
Off  
Net. Info - Wireless LAN  
Connection mode  
Wireless LAN System  
Antenna level  
Projector Name  
SSID  
Displays wireless network status  
and details  
DHCP  
IP Address  
Subnet Mask  
Gateway Address  
MAC Address  
Region Code  
Display the QR Code  
Displays network information for  
the projection in a QR code so  
you can connect to the projector  
from the Epson iProjection app  
102  
Setting  
Options  
Description  
Network Configuration  
Accesses additional network  
menus  
Configures your network settings  
Related tasks  
Projector Information Display - Info Menu  
You can display information about the projector and input sources by viewing the Info menu. However,  
you cannot change any settings in the menu.  
Select Version to display the projector's firmware version. Select Projector Info to display the settings  
described below.  
Note: Available settings depend on the current input source. The lamp usage timer does not register any  
hours until you have used the lamp for at least 10 hours.  
103  
 
Information item  
Lamp Hours  
Description  
Displays the number of hours (H) the lamp has been used in  
Normal and ECO Power Consumption modes; if the information is  
displayed in yellow, obtain a genuine Epson replacement lamp  
soon  
Source  
Displays the name of the port to which the current input source is  
connected  
Input Signal  
Resolution  
Scan Mode  
Refresh Rate  
3D Format  
Displays the input signal setting of the current input source  
Displays the resolution of the current input source  
Displays the scan mode of the current input source  
Displays the refresh rate of the current input source  
Displays the 3D format of the current input source during 3D  
projection  
Sync Info  
Color Depth  
Status  
Displays information that may be needed by a service technician  
Displays the color depth  
Displays information about projector problems that may be needed  
by a service technician  
Serial Number  
Event ID  
Displays the projector's serial number  
Displays the Event ID number corresponding to a specific projector  
problem; see the list of Event ID codes  
(Home Cinema 2150)  
Event ID Code List  
If the Event ID option on the Info menu displays a code number, check this list of Event ID codes for the  
solution to the projector problem associated with the code (Home Cinema 2150).  
104  
 
Event ID code  
0020  
0026  
0032  
0036  
0037  
0021  
0022  
0027  
0028  
0029  
0030  
0031  
0035  
0023  
0024  
0025  
0038  
0042  
0041  
Cause and solution  
Screen Mirroring communication error occurred. Turn the projector off and then on  
again, or restart the network software.  
Screen Mirroring did not start. Turn the projector off and then on again.  
Unstable Screen Mirroring communication. Check the network communication  
status, wait a few moments, and try connecting to the network again.  
Connection failed. If you see the PIN entry screen on your computer, enter the PIN  
code displayed on the Screen Mirroring standby screen or at the bottom right of the  
projected image. If this does not solve the problem, restart the projector and  
connected devices, then check the connection settings.  
Wireless LAN system mismatch. Check the wireless LAN settings for the mobile  
device and projector, then try connecting again.  
Connection failed. Delete the recorded projector information on your computer and  
try connecting again.  
0043  
The video format is not supported. Change the resolution of the mobile device or  
select a different Adjust Image Quality setting , then try connecting again.  
0432  
0435  
0433  
The network software did not start. Turn the projector off and then on again.  
Cannot display the transferred images. Restart the network software.  
105  
Event ID code  
0434  
Cause and solution  
Unstable network communication. Check the network communication status, wait a  
few moments, and try connecting to the network again  
0481  
0482  
0485  
0484  
Communication with computer was disconnected. Restart the network software.  
0483  
The network software quit unexpectedly. Check the network communication status,  
then turn the projector off and then on again.  
04FE  
0479  
A projector system error has occurred. Turn the projector off and then on again.  
04FF  
0891  
Cannot find an access point with the same SSID. Set your computer, access point,  
and projector to the same SSID.  
0892  
0894  
0898  
0899  
The WPA/WPA2 authentication type does not match. Make sure the wireless  
network security settings are correct.  
Communication with unauthorized access point was disconnected. Contact your  
network administrator.  
Failed to acquire DHCP address. Make sure the DHCP server is operating correctly.  
If you are not using DHCP, turn off the DHCP setting in the Network menus.  
A communication error has occurred. Try restarting the networks fotware and your  
projector. If that does not solve the problem, contact Epson for help.  
Projector Reset Options - Reset Menu  
You can reset most of the projector settings to their default values using the Reset All option on the  
Reset menu.  
106  
 
You can reset the projector's lamp usage timer to zero when you replace the lamp using the Reset  
Lamp Hours option and you can also reset all memory entries using the Reset Memory option.  
You cannot reset the following settings using the Reset All option:  
• Language  
• Lamp Hours  
• Memory settings  
• All settings in the Network menu  
107  
Maintaining and Transporting the Projector  
Follow the instructions in these sections to maintain your projector and transport it from place to place.  
Projector Maintenance  
Your projector needs little maintenance to keep working at its best.  
You may need to clean the lens periodically, and clean the air filter and air vents to prevent the projector  
from overheating due to blocked ventilation.  
The only parts you should replace are the lamp, air filter, and remote control batteries. If any other part  
needs replacing, contact Epson or an authorized Epson servicer.  
Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open  
any cover on the projector, except as specifically explained in this manual. Dangerous electrical voltages  
in the projector can injure you severely.  
Warning: Do not try to service this product yourself, except as specifically explained in this manual.  
Refer all other servicing to qualified servicers.  
Related references  
Cleaning the Lens  
Clean the projector's lens periodically, or whenever you notice dust or smudges on the surface.  
• To remove dust or smudges, gently wipe the lens with lens-cleaning paper.  
108  
     
• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the  
lens. Do not spray any liquid directly on the lens.  
Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the  
projector lamp may cause a fire.  
Caution: Do not use glass cleaner or any harsh materials to clean the lens and do not subject the lens  
to any impacts; you may damage it. Do not use canned air, or the gases may leave a residue. Avoid  
touching the lens with your bare hands to prevent fingerprints on or damage to the lens surface.  
Cleaning the 3D Glasses  
To remove dust, dirt, smudges, or fingerprints from the glasses, use a soft, dry, lint-free cloth.  
Note: Unplug any charging cables from the glasses before cleaning them.  
Caution: Do not use paper towels or any other abrasive materials to clean the glasses.  
Cleaning the Projector Case  
Before cleaning the projector case, turn off the projector and unplug the power cord.  
• To remove dust or dirt, use a soft, dry, lint-free cloth.  
109  
   
• To remove stubborn dirt, use a soft cloth moistened with water and mild soap. Do not spray liquid  
directly on the projector.  
Caution: Do not use wax, alcohol, benzine, paint thinner, or other chemicals to clean the projector  
case. These can damage the case. Do not use canned air, or the gases may leave a residue.  
Air Filter and Vent Maintenance  
Regular filter maintenance is important to maintaining your projector. Your Epson projector is designed  
with an easily accessible, user-replaceable filter to protect your projector and make regular maintenance  
simple. Filter maintenance intervals will depend on the environment.  
If regular maintenance is not performed, your Epson projector will notify you when the temperature  
inside the projector has reached a high level. Do not wait until this warning appears to maintain your  
projector filter as prolonged exposure to high temperatures may reduce the life of your projector or lamp.  
Damage due to the failure to properly maintain the projector or its filter may not be covered by the  
projector or lamp Limited Warranties.  
Related references  
Cleaning the Air Filter and Vents  
Clean the projector's air filter or vents if they get dusty, or if you see a message telling you to clean them.  
1. Turn off the projector and unplug the power cord.  
110  
   
2. Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as  
a paintbrush).  
Note: You can remove the air filter so you can clean both sides of it. Do not rinse the air filter in  
water, or use any detergent or solvent to clean it.  
Caution: Do not use canned air. The gases may leave a flammable residue or push dust and debris  
into the projector's optics or other sensitive areas.  
3. If dust is difficult to remove or the air filter is damaged, replace the air filter.  
Related tasks  
Replacing the Air Filter  
You need to replace the air filter in the following situations:  
• After cleaning the air filter, you see a message telling you to clean or replace it  
• The air filter is torn or damaged  
You can replace the air filter while the projector is mounted to the ceiling or placed on a table.  
1. Turn off the projector and unplug the power cord.  
111  
 
2. Carefully open the air filter cover.  
3. Pull the air filter out of the projector.  
Note: Air filters contain ABS resin and polyurethane foam. Dispose of used air filters according to  
local regulations.  
4. Place the new air filter in the projector as shown and push gently until it clicks into place.  
5. Close the air filter cover.  
112  
Projector Lamp Maintenance  
The projector keeps track of the number of hours the lamp is used and displays this information in the  
projector's menu system.  
Replace the lamp as soon as possible when the following occurs:  
• The projected image gets darker or starts to deteriorate  
• A message appears when you turn on the projector telling you to replace the lamp  
• The projector's Lamp light is flashing orange and its power light is flashing blue  
Related references  
Replacing the Lamp  
Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.  
Warning: Let the lamp fully cool before replacing it to avoid injury.  
You can replace the lamp while the projector is mounted to the ceiling, if necessary.  
1. Turn off the projector and unplug the power cord.  
2. Allow the projector lamp to cool down for at least one hour.  
113  
   
3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp  
cover.  
Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful  
removing any broken glass to avoid injury. If the projector is installed on the ceiling, stand to the side  
of the lamp cover and not underneath it; pieces of glass could fall into your eyes or mouth when you  
open the lamp cover.  
4. Slide the lamp cover out and lift it off.  
114  
5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out.  
6. Grasp the raised section of the lamp and gently pull the lamp out of the projector.  
Note:  
The lamp(s) in this product contain mercury. Please consult your state and local  
regulations regarding disposal or recycling. Do not put in the trash.  
115  
7. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right  
way.  
Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure.  
8. Push in the lamp firmly and tighten the screws to secure it.  
Caution: Do not over-tighten the screws.  
116  
9. Replace the lamp cover and tighten the screw to secure it.  
Note: Be sure the lamp cover is securely installed or the lamp will not come on.  
Reset the lamp timer to zero to keep track of the new lamp's usage.  
Related tasks  
Resetting the Lamp Timer  
You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement  
message and to keep track of lamp usage correctly.  
Note: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage  
information.  
1. Turn on the projector.  
2. Press the Menu button.  
117  
 
3. Select the Reset menu and press Enter.  
4. Select Reset Lamp Hours and press Enter.  
You see a prompt asking if you want to reset the lamp hours.  
5. Select Yes and press Enter.  
6. Press Menu or Esc to exit the menus.  
Related tasks  
Replacing the Remote Control Batteries  
The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they  
run out.  
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,  
or mix new and old batteries.  
118  
 
1. Remove the battery cover as shown.  
2. Remove the old batteries.  
Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on  
your hands. If it gets on your hands, wash them immediately to avoid injury.  
3. Insert the batteries with the + and ends facing as shown.  
119  
4. Replace the battery cover and press it down until it clicks into place.  
Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat  
or flame. Keep batteries out of the reach of children; they are choking hazards and are very  
dangerous if swallowed.  
Related references  
Transporting the Projector  
The projector contains precision parts, some of which are glass. Follow these guidelines to transport,  
ship, or store the projector safely:  
• Remove any equipment connected to the projector.  
• When transporting the projector a long distance or as checked luggage, pack it in a firm box with  
cushioning around it and mark the box "Fragile."  
• When shipping the projector for repairs, place it in its original packing materials, if possible, or use  
equivalent materials with cushioning around the projector. Mark the box "Fragile."  
Note: Epson shall not be liable for any damages incurred during transportation.  
120  
 
Solving Problems  
Check the solutions in these sections if you have any problems using the projector.  
Projection Problem Tips  
If the projector is not working properly, try turning it off and unplugging it. Then plug it back in and turn it  
on.  
If this does not solve the problem, check the following:  
• The lights on the projector may indicate what the problem is.  
• The solutions in this manual can help you solve many problems.  
If none of these solutions help, you can contact Epson for technical support.  
Parent topic: Solving Problems  
Related references  
121  
   
Projector Light Status  
The lights on the projector indicate the projector status and let you know when a problem occurs. Check  
the status and color of the lights and look for a solution in the table here.  
1
2
3
4
5
Power light  
Status light  
WLAN (wireless LAN) light; non-functional for Home Cinema 2100  
Lamp light  
Temp (temperature) light  
Power, Status, Lamp, and Temp Lights  
Power light  
Blue  
Status light  
Blue  
Lamp light Temp light  
Status and solution  
Normal operation  
Off  
Off  
Off  
Off  
Off  
Off  
Blue  
Flashing blue  
Off  
Warming up or cooling down  
Blue  
Standby (Home Cinema 2100) or  
sleep mode  
122  
 
Power light  
Status light  
Lamp light Temp light  
Status and solution  
Flashing blue  
Varies  
Off  
Flashing  
orange  
Projector is too hot  
• Make sure that the vents and air  
filter are not clogged with dust or  
obstructed by nearby objects  
• Clean or replace the air filter  
• Make sure the environmental  
temperature is not too hot  
Flashing blue  
Varies  
Flashing  
orange  
Off  
Off  
Replace the lamp soon to avoid  
damage; do not continue using the  
projector  
Off  
Off  
Off  
Off  
Flashing blue  
Flashing blue  
Flashing blue  
Flashing blue  
Flashing  
orange  
Internal projector error; turn the  
projector off, unplug it, and contact  
Epson for help  
Off  
Flashing  
orange  
A fan or sensor has a problem; turn  
the projector off, unplug it, and  
contact Epson for help  
Flashing  
orange  
Flashing  
orange  
Auto Iris error; turn the projector off,  
unplug it, and contact Epson for  
help  
Orange  
Orange  
Power error; turn the projector off,  
unplug it, and contact Epson for  
help  
123  
Power light  
Status light  
Lamp light Temp light  
Status and solution  
Off  
Flashing blue  
Orange  
Off  
Lamp or lamp cover has a problem  
• Check to see if the lamp is burned  
out, broken, or installed  
incorrectly; reseat or replace the  
lamp as necessary  
• Check that the lamp cover is  
installed correctly  
• Clean or replace the air filter  
• If operating the projector at high  
altitude, turn on High Altitude  
Mode  
• If the problem persists, unplug the  
projector and contact Epson for  
help  
Off  
Flashing blue  
Off  
Orange  
Projector has overheated and  
turned off; leave it turned off to cool  
down for about five minutes, then do  
the following:  
• Make sure that the vents and air  
filter are not clogged with dust or  
obstructed by nearby objects  
• Clean or replace the air filter  
• If operating the projector at high  
altitude, turn on High Altitude  
Mode  
• If the problem persists, unplug the  
projector and contact Epson for  
help  
WLAN Light (Home Cinema 2150)  
WLAN light  
Status and solution  
Blue  
Wireless LAN is available  
124  
WLAN light  
Status and solution  
Flashing blue quickly  
Flashing blue slowly  
Connecting to a device  
Wireless LAN error; turn the Wireless LAN Power setting off and  
then on again  
Off  
Wireless LAN is not available; make sure the Wireless LAN Power  
setting is turned on  
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and  
contact Epson for help.  
Parent topic: Solving Problems  
Solving Image or Sound Problems  
Check the solutions in these sections if you have any problems with projected images or sound.  
Parent topic: Solving Problems  
Solutions When No Image Appears  
If no image appears, try the following solutions:  
• Make sure the lens cover is open all the way.  
• Press the A/V Mute button on the remote control to see if the image was temporarily turned off.  
• Make sure all necessary cables are securely connected and the power is on for the projector and  
connected video sources.  
125  
   
• Press the projector's power button to wake it from standby or sleep mode. Also see if your connected  
computer is in sleep mode or displaying a blank screen saver.  
• Press the Menu button. If the projector menu is able to display, there may be a problem with the  
connected video source, cable connection, or port.  
• Check the settings on the Signal menu to make sure they are correct for the current video source.  
• Adjust the Brightness setting or select the Normal Power Consumption setting.  
• Check the Display setting to make sure Messages is set to On.  
• If the projector does not respond when you press the control panel buttons, the buttons may be  
locked. Unlock the buttons. Press and hold the Enter button for 5 to 10 seconds or use the remote  
control.  
• For images projected with Windows Media Center, reduce the screen size from full screen mode.  
• For images projected from applications using Windows DirectX, turn off DirectX functions.  
• If the other solutions do not solve the problem, reset all of the projector settings using the options on  
the Reset menu.  
• The projector may not be able to project copyrighted videos that you play back on a computer. For  
details, see the manual supplied with your computer.  
Related references  
Solutions When "No Signal" Message Appears  
If the "No Signal" message appears, try the following solutions:  
• Press the Source button on the projector repeatedly to cycle through the available sources. Wait a  
few seconds for an image to appear.  
• Turn on the connected computer or video source, and press its play button to begin your presentation,  
if necessary.  
• Check the connection from the projector to your video sources.  
• If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.  
• If necessary, turn the projector and the connected computer or video source off and then on again.  
• If the other solutions do not solve the problem, reset all of the projector settings using the options on  
the Reset menu.  
126  
 
Related concepts  
Displaying From a PC Laptop  
If you see the "No Signal" message when you display from a PC laptop, you need to set up the laptop to  
display on an external monitor.  
1. Hold down the laptop's Fn key and press the key labeled with a monitor icon or CRT/LCD. (See your  
laptop manual for details.) Wait a few seconds for an image to appear. To display on both the  
laptop's monitor and the projector, try pressing the same keys again.  
Note: On Windows 7 or later, hold down the Windows key and press P at the same time, then click  
Duplicate.  
2. If the same image is not displayed by the laptop and projector, check the Windows Display utility to  
make sure the external monitor port is enabled and extended desktop mode is disabled. (See your  
computer or Windows manual for instructions.)  
3. If necessary, check your video card settings and set the multiple display option to Mirror or  
Duplicate.  
Displaying From a Mac Laptop  
If you see the "No Signal" message when you display from a Mac laptop, you need to set up the laptop  
for mirrored display. (See your laptop manual for details.)  
1. Open the System Preferences utility and select Displays, Display, or Color LCD.  
2. Click the Arrange or Arrangement tab.  
3. Select the Mirror Displays checkbox.  
127  
   
Solutions When "Not Supported" Message Appears  
If the "Not Supported" message appears, try the following solutions:  
• Make sure the computer's display resolution does not exceed the projector's resolution and frequency  
limit. If necessary, select a different display resolution for your computer. (See your computer manual  
for details.)  
• As a test, try setting the computer's display resolution to the lowest possible setting, and then  
gradually increase it as necessary.  
• Check the input resolution under Projector Info in the Info menu and make sure that the projector  
supports that resolution.  
Related references  
Solutions When Only a Partial Image Appears  
If only a partial computer image appears, try the following solutions:  
• Try adjusting the image position using the Position menu setting.  
• Select a different image aspect ratio in the Signal menu.  
• Check the cables connecting the computer or video source to the projector. Try connecting different  
cables.  
• Check your computer display settings to disable dual display and set the resolution within the  
projector's limits. (See your computer manual for details.)  
• Check the resolution assigned to your presentation files to see if they are created for a different  
resolution than you are projecting in. (See your software help for details.)  
• Make sure you selected the correct Projection setting.  
• If you are viewing a 3D image, make sure you selected the correct 3D format.  
Related references  
128  
   
Solutions When the Image is Not Rectangular  
If the projected image is not evenly rectangular, try the following solutions:  
• Turn on automatic keystone adjustments using the projector's menus.  
• Place the projector directly in front of the center of the screen, facing it squarely, if possible.  
• If you adjusted the projector height using the projector feet, press the keystone buttons on the  
projector to adjust the image shape.  
• Adjust the position of the projector's horizontal keystone slider.  
• Adjust the Quick Corner setting to correct the image shape.  
Related concepts  
Related references  
Solutions When the Image Contains Noise or Static  
If the projected image seems to contain electronic interference (noise) or static, try the following  
solutions:  
• Check the cables connecting your computer or video source to the projector. They should be:  
• Separated from the power cord to prevent interference  
• Securely connected at both ends  
• Not connected to an extension cable  
• No longer than 10 feet (3 m) for VGA/computer cables or 24 feet (7.3 m) for HDMI cables  
• Check the settings on the projector's Signal menu to make sure they match the video source. If  
available for your video source, adjust the Noise Reduction setting.  
• Select a computer video resolution and refresh rate that are compatible with the projector.  
• If you are projecting from a computer using a VGA cable, press the Auto button on the remote control  
to automatically adjust the tracking and sync. If the problem remains, display a uniformly patterned  
image on the screen and manually adjust the Tracking and Sync settings.  
• If you connected an extension power cable, try projecting without it to see if it caused interference in  
the signal.  
129  
   
Related references  
Solutions When the Image is Fuzzy or Blurry  
If the projected image is fuzzy or blurry, try the following solutions:  
• Adjust the image focus.  
• Clean the projector lens.  
Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the  
projector warm up to room temperature before using it.  
• Position the projector close enough to the screen.  
• Position the projector so the keystone adjustment angle is not so wide that it distorts the image.  
• Turn on automatic keystone adjustment in the projector's menus.  
• Adjust the Sharpness setting to improve image quality.  
• If you are projecting from a computer, press the Auto button on the remote control to automatically  
adjust the tracking and sync. If any bands or overall blurriness remain, display a uniformly patterned  
image on the screen and manually adjust the Tracking and Sync settings.  
• If you are projecting from a computer, try using a lower resolution or try to match the projector's native  
resolution.  
Related references  
Related tasks  
130  
 
Solutions When the Image Brightness or Colors are Incorrect  
If the projected image is too dark or light, or the colors are incorrect, try the following solutions:  
• Press the Color Mode button on the remote control to try different color modes for the image and  
environment.  
• Check your video source settings.  
• Adjust the available settings on the Image menu for the current input source, such as Brightness,  
Contrast, Tint, Advanced, and Color Saturation.  
• Make sure all the cables are securely connected to the projector and your video device. If you  
connected long cables, try connecting shorter cables.  
• If you are using the ECO Power Consumption setting, try selecting Normal in the projector's menus.  
• Position the projector close enough to the screen.  
• If the image has been progressively darkening, you may need to replace the projector lamp soon.  
• If the above solutions do not correct your image, try resetting all of the projector's settings using the  
Reset menu.  
Related references  
Solutions When a 3D Image Does Not Display Correctly  
If a 3D image does not display correctly, try the following solutions:  
• Make sure the 3D Display setting on the Signal menu is set to Auto or 3D.  
• Make sure your video device and media are both 3D-compatible. Refer to the documentation that  
came with your video device for more information.  
• Make sure you are using an HDMI cable that supports 3D signals.  
• Make sure you selected the correct 3D Format setting on the Signal menu. Normally this should be  
set to Auto, but in some cases you may need to select a different setting to match the 3D signal from  
your video device.  
• Make sure you are using RF 3D active shutter glasses. You can purchase them from Epson.  
131  
   
• Make sure your 3D glasses are turned on and fully charged. If the glasses have entered standby  
mode, slide the power switch on the glasses to the Off position and then back to the On position.  
• Make sure your 3D glasses are paired with the projector.  
• Adjust the 3D Depth setting on the Signal menu.  
• Make sure you are within the 3D viewing range.  
• If you see 3D crosstalk, make sure the HDMI Video Range setting in the Image menu is set to Auto or  
Normal.  
• Avoid using the projector near wireless networks, microwave ovens, 2.4 GHz cordless phones, or  
other devices that use the 2.4 GHz frequency band. These devices can interfere with the signal  
between the projector and the 3D glasses.  
• If the other solutions do not solve the problem, change the Inverse 3D Glasses setting on the Signal  
menu. Return the setting to its original value if changing it does not solve the problem as it can  
adversely affect the 3D image.  
Related references  
Related tasks  
Solutions to Sound Problems  
If there is no sound when you expect it or the volume is too low or high, try the following solutions:  
• Adjust the projector's volume settings.  
• Press the A/V Mute or Mute button on the remote control to resume video and audio if they were  
temporarily stopped.  
• Press the Source button on the projector or a source button on the remote control to switch to the  
correct input source, if necessary.  
• Check your computer or video source to make sure the volume is turned up and the audio output is set  
for the correct source.  
• Check the audio cable connections between the projector and your video source.  
• If you do not hear sound from an HDMI source, set the connected device to PCM output.  
132  
 
• Make sure any connected audio cables are labeled "No Resistance".  
• If you connected an audio device to the projector's Audio Out port, the internal speaker is disabled.  
However, you can still control the volume level via the remote control.  
• If you turn the projector on immediately after turning it off, the cooling fans may run at high speed  
momentarily and cause an unexpected noise. This is normal.  
Related concepts  
Related tasks  
Solving Projector or Remote Control Operation Problems  
Check the solutions in these sections if you have problems operating the projector or remote control.  
Parent topic: Solving Problems  
Solutions to Projector Power or Shut-Off Problems  
If the projector does not come on when you press the power button or it shuts off unexpectedly, try the  
following solutions:  
• Make sure the power cord is securely connected to the projector and to a working electrical outlet.  
• The projector's buttons may be locked for security. Unlock the buttons or use the remote control to  
turn on the projector.  
• If the projector's lamp shuts off unexpectedly, it may have entered standby mode after a period of  
inactivity. Press the power button to wake the projector and adjust the Sleep Mode Timer setting to  
change the sleep interval.  
• If the power button on the remote control does not turn on the projector, check its batteries and make  
sure the Remote Receiver setting is turned on in the projector's menu, if available.  
• The power cord may be defective. Try another power cord. If that doesn't work, disconnect the cord  
and contact Epson.  
133  
   
Related references  
Related tasks  
Solutions to Problems with the Remote Control  
If the projector does not respond to remote control commands, try the following solutions:  
• Check that the remote control batteries are installed correctly and have power. If necessary, replace  
the batteries.  
• Make sure you are operating the remote control within the reception angle and range of the projector.  
• Make sure the projector is not warming up or shutting down.  
• Check to see if a button on the remote control is stuck down, causing it to enter sleep mode. Release  
the button to wake the remote control up.  
• Strong fluorescent lighting, direct sunlight, or infrared device signals may be interfering with the  
projector's remote receivers. Dim the lights or move the projector away from the sun or interfering  
equipment.  
• If available, turn off one of the remote receivers in the projector's menu system, or check if all the  
remote receivers were turned off.  
• If you lose the remote control, you can purchase another from an authorized Epson reseller.  
Related references  
Related tasks  
134  
 
Solving Network Problems  
Check the solutions in these sections if you have problems using the projector on a network (Home  
Cinema 2150).  
Parent topic: Solving Problems  
Solutions When Wireless Authentication Fails  
If you cannot authenticate a wireless connection, try the following solutions (Home Cinema 2150):  
• Make sure the Wireless LAN Power setting is set to On.  
• Check the Security settings and passphrase in the Network Configuration menu.  
• Check the Event ID number displayed in the Info menu and check the link below to identify the  
problem.  
Related references  
Related tasks  
Solutions When You Cannot Connect Using Screen Mirroring  
If you are unable to connect to the projector using Screen Mirroring (Home Cinema 2150), try the  
following solutions:  
• Select On as the Screen Mirroring setting in the projector's Network menu.  
• Make sure the Operation Mode and Channel settings are correct for your mobile environment and try  
connecting again.  
• Make sure the mobile device settings are correct.  
• You may not be able to connect immediately after disconnecting from the projector. Wait a while and  
try connecting again.  
• Restart the mobile device.  
135  
     
• If you have previously connected to the projector using Screen Mirroring, the device may have saved  
the previous connection information. Delete the saved information and connect to the projector from  
the list of available devices.  
Related concepts  
Related references  
Solutions When the Image Contains Static During Network Projection  
If the projected image contains static during network projection, try the following solutions:  
• Check for any obstacles between the access point, the computer, the mobile device, and the projector.  
If necessary, change their positions to improve communication. Also, make sure that they are not too  
far apart. Move them closer together and try to connect again.  
• If the wireless connection is slow or your projected image contains noise, check for interference from  
other equipment, such as a Bluetooth device or microwave. Move the interfering device farther away  
or expand your wireless bandwidth.  
• If the connection speed declines, reduce the number of connected devices.  
Where to Get Help  
If you need to contact Epson for technical support services, use the following support options.  
Internet Support  
Visit Epson's support website at epson.com/support (U.S.), epson.ca/support (Canada), or  
epson.com.jm/support (Caribbean) and select your product for solutions to common problems with your  
projector. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail  
Epson with your questions.  
Speak to a Support Representative  
To use the Epson PrivateLine Support service, call (800) 637-7661. This service is available for the  
duration of your warranty period. You may also speak with a projector support specialist by dialing (562)  
276-4394 (U.S.) or (905) 709-3839 (Canada).  
136  
   
Support hours are 6 AM to 8 PM, Pacific Time, Monday through Friday and 7 AM to 4 PM, Pacific Time,  
Saturday.  
Days and hours of support are subject to change without notice. Toll or long distance charges may  
apply.  
Before you call, have the following information ready:  
• Product name  
• Product serial number (located on the bottom or rear of the projector, or in the menu system)  
• Proof of purchase (such as a store receipt) and date of purchase  
• Computer or video configuration  
• Description of the problem  
Purchase Supplies and Accessories  
You can purchase screens, other optional accessories, and replacement parts from an Epson authorized  
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766) in the U.S. or 800-807-7766 in  
Canada. Or you can purchase online at epsonstore.com (U.S. sales) or epsonstore.ca (Canadian sales).  
To purchase a replacement remote control, call (562) 276-4394 (U.S.) or (905) 709-3839 (for dealer  
referral in Canada).  
Parent topic: Solving Problems  
137  
Technical Specifications  
These sections list the technical specifications of your projector.  
General Projector Specifications  
Type of display  
Resolution  
Lens  
Poly-silicon TFT active matrix  
1920 × 1080 pixels (1080p)  
F=1.51 to 1.99  
Focal length: 18.2 to 29.2 mm  
Up to 1 billion  
Color reproduction  
Brightness  
Normal Power Consumption mode:  
White light output 2500 lumens (ISO 21118 standard)  
Color light output 2500 lumens  
ECO Power Consumption mode:  
White light output 1650 lumens (ISO 21118 standard)  
Note: Color brightness (color light output) and white brightness  
(white light output) will vary depending on usage conditions. Color  
light output measured in accordance with IDMS 15.4; white light  
output measured in accordance with ISO 21118.  
138  
   
Contrast ratio  
Home Cinema 2100:  
35000:1 with Auto Iris on, Dynamic Color Mode, Normal Power  
Consumption mode, and Wide zoom mode  
Home Cinema 2150:  
60000:1 with Auto Iris on, Dynamic Color Mode, Normal Power  
Consumption mode, and Wide zoom mode  
Image size  
30 inches (0.76 m) to 300 inches (7.62 m)  
(in native aspect ratio)  
Projection distance  
(in native aspect ratio)  
Projection methods  
Optical aspect ratio  
(width-to-height)  
34.3 inches (0.87 m) to 570.9 inches (14.5 m)  
Front, rear, ceiling-mounted  
16:9  
Focus adjustment  
Zoom adjustment  
Zoom ratio  
Manual  
Manual  
1.0 to 1.6  
(Tele-to-Wide)  
Internal sound system  
Noise level  
10 W monaural  
37 dB (Normal Power Consumption mode)  
27 dB (ECO Power Consumption mode)  
Vertical: ± 30º (manual and using Auto Keystone)  
Horizontal: ± 30º (manual)  
Keystone correction angle  
USB Type A port compatibility One USB 2.0 compliant port for USB device input  
Projector Lamp Specifications  
Type  
Power consumption  
UHE (Ultra High Efficiency)  
200 W  
139  
 
Lamp life  
Normal Power Consumption mode:  
Up to about 4500 hours  
ECO Power Consumption mode:  
Up to about 7500 hours  
Note: Turn off this product when not in use to prolong the life of the projector. Lamp life will vary  
depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.  
Remote Control Specifications  
Reception range  
Batteries  
19.7 feet (6 m)  
Two alkaline or manganese AA  
Projector Dimension Specifications  
Height (excluding feet)  
4.2 inches (107 mm)  
Width  
Depth  
Weight  
12.1 inches (309 mm)  
10.9 inches (278 mm)  
Home Cinema 2100:  
7.5 lb (3.4 kg)  
Home Cinema 2150 :  
7.7 lb (3.5 kg)  
Projector Electrical Specifications  
Rated frequency  
50/60 Hz  
140  
     
Power supply  
100 to 240 V AC ±10%  
3.2 to 1.4 A  
Power consumption  
Operating:  
(100 to 120 V)  
Normal Power Consumption mode: 312 W  
ECO Power Consumption mode: 237 W  
Standby mode (Home Cinema 2150): 2.0 W  
Sleep mode: 0.2  
Power consumption  
Operating:  
(220 to 240 V)  
Normal Power Consumption mode: 296 W  
ECO Power Consumption mode: 227 W  
Standby mode (Home Cinema 2150): 2.0 W  
Sleep mode: 0.2  
Projector Environmental Specifications  
Temperature  
Operating:  
Up to 7500 ft (2286 m): 41 to 95 °F (5 to 35 °C)  
7500 ft (2286 m) to 9843 ft (3000 m): 41 to 86 °F (5 to 30 °C)  
Storage: 14 to 140 °F (–10 to 60 °C)  
Operating: 20 to 80%  
Humidity (relative, non-  
condensing)  
Storage: 10 to 90%  
Operating altitude  
Up to 4921 feet (1500 m)  
4921 feet (1500 m) to 9843 feet (3000 m) with High Altitude Mode  
enabled  
141  
 
Projector Safety and Approvals Specifications  
United States  
FCC Part 15 Class B (DoC)  
UL60950-1 2nd edition (cTUVus Mark)  
ICES-003 Class B  
Canada  
CSA C22.2 No. 60950-1  
Supported Video Display Formats  
For best results, your computer's monitor port or video card resolution should be set to display in the  
projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other  
computer display resolutions, so your image will be resized to fit automatically.  
Your computer's monitor port or video card refresh rate (vertical frequency) must be compatible with the  
projector. (See your computer or video card manual for details.)  
The table here lists the compatible refresh rate and resolution for each compatible video display format.  
Display format  
Refresh rate (in Hz)  
Resolution (in pixels)  
Computer signals (analog RGB)  
VGA  
60  
60  
60  
60  
60  
60  
60  
60  
60  
640 × 480  
SVGA  
XGA  
800 × 600  
1024 × 768  
1280 × 960  
1280 × 1024  
1280 × 768  
1366 × 768  
1280 × 800  
1600 × 900  
SXGA  
WXGA  
WXGA++  
HDMI input signals  
SDTV (480i/480p)  
60  
720 × 480  
142  
   
Display format  
SDTV (576i/576p)  
HDTV (720p)  
Refresh rate (in Hz)  
Resolution (in pixels)  
720 × 576  
50  
50/60  
1280 × 720  
HDTV (1080i)  
50/60  
1920 × 1080  
HDTV (1080p)  
MHL input signals  
SDTV (480i/480p)  
SDTV (576i/576p)  
HDTV (720p)  
24/30/50/60  
1920 × 1080  
60  
720 × 480  
50  
720 × 576  
50/60  
50/60  
24/30  
1280 × 720  
1920 × 1080  
1920 × 1080  
HDTV (1080i)  
HDTV (1080p)  
3D HDMI input signals  
Display format  
Refresh rate (in Hz)  
Resolution (in pixels) 3D formats  
HDTV (720p)  
50/60  
1280 × 720  
Frame Packing  
Side by Side  
Top and Bottom  
Side by Side  
HDTV (1080i)  
HDTV (1080p)  
50/60  
50/60  
24  
1920 × 1080  
1920 × 1080  
1920 × 1080  
Side by Side  
Frame Packing  
Side by Side  
Top and Bottom  
3D MHL input signals  
Display format  
Refresh rate (in Hz)  
Resolution (in pixels) 3D formats  
HDTV (720p)  
50/60  
1280 × 720  
Side by Side  
Top and Bottom  
143  
Display format  
HDTV (1080i)  
HDTV (1080p)  
Refresh rate (in Hz)  
Resolution (in pixels) 3D formats  
50/60  
50/60  
24  
1920 × 1080  
1920 × 1080  
1920 × 1080  
Side by Side  
Side by Side  
Top and Bottom  
144  
Notices  
Check these sections for important notices about your projector.  
Recycling  
Epson offers a recycling program for end of life products. Please go to this site for information on how to  
return your products for proper disposal.  
Parent topic: Notices  
Important Safety Information  
Caution: Never look into the projector lens when the lamp is turned on; the bright light can damage your  
eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except  
the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you.  
Except as specifically explained in this User's Guide, do not attempt to service this product yourself.  
Refer all servicing to qualified service personnel.  
Warning: The projector and its accessories come packaged in plastic bags. Keep plastic bags away  
from small children to avoid any risk of suffocation.  
Caution: When you replace the lamp, never touch the new lamp with your bare hands; the invisible  
residue left by the oil on your hands may shorten the lamp life. Use a cloth or glove to handle the new  
lamp.  
Parent topic: Notices  
145  
     
Important Safety Instructions  
Follow these safety instructions when setting up and using the projector:  
• Do not look into the lens when the projector is on. The bright light can damage your eyes. Avoid  
standing in front of the projector so the bright light does not shine into your eyes.  
• Do not place the projector on an unstable cart, stand, or table.  
• Do not operate the projector on its side, or while tilted to one side. Do not tilt the projector more than  
11° forward or back.  
• If the projector is mounted on a ceiling or wall, it should be installed by qualified technicians using  
mounting hardware designed for use with this projector.  
• When installing or adjusting a ceiling or wall mount, do not use adhesives to prevent the screws from  
loosening and do not use oils or lubricants. This may cause the projector case to crack and the  
projector to fall from its ceiling mount. This could cause serious injury to anyone under the mount and  
could damage the projector.  
• Do not use the projector near water, sources of heat, high-voltage electrical wires, or sources of  
magnetic fields.  
• Use the type of power source indicated on the projector. Use of a different power source may result in  
fire or electric shock. If you are not sure of the power available, consult your dealer or power company.  
• Place the projector near a wall outlet where the plug can be easily unplugged.  
• Take the following precautions when handling the plug: Do not hold the plug with wet hands. Do not  
insert the plug into a dusty outlet. Insert the plug firmly into the outlet. Do not pull the power cord when  
disconnecting the plug; always be sure to hold the plug when disconnecting it. Do not overload wall  
outlets, extension cords, or power strips. Failure to comply with these precautions could result in fire or  
electric shock.  
• Do not place the projector where the cord can be walked on. This may result in fraying or damage to  
the plug.  
• Unplug the projector from the wall outlet and allow to cool before cleaning. Use a dry cloth (or, for  
stubborn dirt or stains, a moist cloth that has been wrung dry) for cleaning. Do not use liquid or aerosol  
cleaners, any sprays containing flammable gas, or solvents such as alcohol, paint thinner, or benzine.  
• Do not block the slots and openings in the projector case. They provide ventilation and prevent the  
projector from overheating. Do not operate the projector on a sofa, rug, or other soft surface, or set it  
on top of loose papers. Do not cover the projector with a blanket, curtain, or tablecloth. If you are  
setting up the projector near a wall, leave at least 7.9 inches (20 cm) of space between the wall and  
the projector.  
• Do not operate the projector in a closed-in cabinet unless proper ventilation is provided.  
146  
 
• Never allow objects of any kind to enter any openings in the projector. Do not leave objects, especially  
flammable objects, near the projector. Never spill liquid of any kind into the projector.  
• If you are using two or more projectors side-by-side, leave at least 2 feet (60 cm) of space between the  
projectors to allow for proper ventilation.  
• You may need to clean the air filter and vent. A clogged air filter or vent can block ventilation needed  
to cool the projector. Do not use canned air, or the gases may leave a residue.  
• Do not store the projector outdoors for an extended length of time.  
• Except as specifically explained in this manual, do not attempt to service this product yourself. Refer  
all servicing to qualified personnel. Opening or removing covers may expose you to dangerous  
voltages and other hazards.  
• Never open any covers on the projector except as specifically explained in this manual. Never attempt  
to disassemble or modify the projector. Refer all repairs to qualified service personnel.  
• Unplug the projector from the wall outlet and refer servicing to qualified service personnel under the  
following conditions: if it does not operate normally when you follow the operating instructions, or  
exhibits a distinct change in performance; if smoke, strange odors, or strange noises come from the  
projector; if the power cord or plug is damaged or frayed; if liquid or foreign objects get inside the  
projector, or if it has been exposed to rain or water; if it has been dropped or the housing has been  
damaged.  
• Do not touch the plug during an electrical storm. Otherwise, you may receive an electric shock.  
• Unplug the projector when it will not be used for extended periods.  
• Do not use the projector where it may be exposed to rain, water, or excessive humidity.  
• Do not use or store the projector where it may be exposed to smoke, steam, corrosive gases,  
excessive dust, vibration, or shock.  
• Do not use the projector where flammable or explosive gases may be present.  
• Do not use or store the projector or remote control in a hot location, such as near a heater, in direct  
sunlight, or in a closed vehicle.  
• If you use the projector in a country other than where you purchased it, use the correct power cord for  
that country.  
• Do not stand on the projector or place heavy objects on it.  
• Do not use the projector outside of the required temperature range below:  
41 to 95 °F (5 to 35 °C) at an altitude of 7500 feet (2286 m) or less, or 41 to 86 °F (5 to 30 °C) at a  
higher altitude  
147  
Doing so may cause an unstable display and could lead to projector damage. Do not use or store the  
projector where it may be exposed to sudden changes in temperature.  
• Do not store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) or  
in direct sunlight for long periods of time. Doing so may cause damage to the case.  
• Do not place anything that can become warped or damaged by heat near the exhaust vents. Do not  
bring your hands or face close to the vents while projection is in progress. Do not bring your face close  
to the projector while it is in use.  
• Before you move the projector, make sure its power is turned off, the plug is disconnected from the  
outlet, and all cables are disconnected.  
• Never try to remove the lamp immediately after use because it will be extremely hot. Before removing  
the lamp, turn off the power and wait at least an hour to allow the lamp to cool completely.  
• Do not disassemble the lamp or subject it to impacts.  
• Do not place the source of an open flame, such as a lit candle, on or near the projector.  
• Do not block the lens during projection using a book or any object other than the lens cover. This could  
damage the projector or cause a fire.  
• Do not modify the power cord. Do not place heavy objects on top of the power cord or bend, twist, or  
pull it excessively. Keep the power cord away from hot electrical appliances.  
• If the lamp breaks, ventilate the room to prevent gases contained in the lamp from being inhaled or  
coming in contact with your eyes or mouth. If you do inhale gases or gases come in contact with your  
eyes or mouth, seek medical advice immediately.  
• If the projector is mounted overhead and the lamp breaks, be careful to prevent pieces of glass from  
falling into your eyes or mouth when you open the lamp cover. If pieces of glass do get into your eyes  
or mouth, seek medical advice immediately.  
• Always lower the volume before turning off the projector. Turning on the projector with the volume too  
high can damage your ears.  
Note:  
The lamp(s) in this product contain mercury. Please consult your state and local regulations  
regarding disposal or recycling. Do not put in the trash.  
Parent topic: Notices  
148  
Restriction of Use  
When this product is used for applications requiring high reliability/safety such as transportation devices  
related to aviation, rail, marine, automotive; disaster prevention devices; various safety devices; or  
functional/precision devices, you should use this product only after giving consideration to including fail-  
safes and redundancies into your design to maintain safety and total system reliability.  
Because this product was not intended for use in applications requiring extremely high reliability/safety  
such as aerospace equipment, main communication equipment, nuclear power control equipment, or  
medical equipment related to direct medical care, please make your own judgment on this product's  
suitability after a full evaluation.  
List of Safety Symbols (corresponding to IEC60950-1 A2)  
The following table lists the meaning of the safety symbols labeled on the equipment.  
No.  
Symbol  
Approved Standards  
IEC60417  
Description  
1
"ON" (power)  
No.5007  
To indicate connection to the mains.  
2
3
IEC60417  
No.5008  
"OFF" (power)  
To indicate disconnection from the  
mains.  
IEC60417  
No.5009  
Stand-by  
To identify the switch or switch position  
by means of which part of the equipment  
is switched on in order to bring it into the  
stand-by condition.  
4
ISO7000  
Caution  
No.0434B,  
IEC3864-B3.1  
To identify general caution when using  
the product.  
149  
   
No.  
Symbol  
Approved Standards  
IEC60417  
Description  
5
Caution, hot surface  
No.5041  
To indicate that the marked item can be  
hot and should not be touched without  
taking care.  
6
7
IEC60417  
No.6042  
Caution, risk of electric shock  
To identify equipment that has risk of  
electric shock.  
ISO3864-B3.6  
IEC60417  
No.5957  
For indoor use only  
To identify electrical equipment designed  
primarily for indoor use.  
8
IEC60417  
No.5926  
Polarity of DC power connector  
To identify the positive and negative  
connections (the polarity) on a piece of  
equipment to which a DC power supply  
may be connected.  
9
Polarity of DC power connector  
To identify the positive and negative  
connections (the polarity) on a piece of  
equipment to which a DC. power supply  
may be connected.  
10  
11  
IEC60417  
No.5001B  
Battery, general  
On battery powered equipment. To  
identify a device for instance a cover for  
the battery compartment, or the  
connector terminals.  
IEC60417  
No.5002  
Positioning of cell  
To identify the battery holder itself and to  
identify the positioning of the cell(s)  
inside the battery holder.  
150  
No.  
Symbol  
Approved Standards  
Description  
12  
Positioning of cell  
To identify the battery holder itself and to  
identify the positioning of the cell(s)  
inside the battery holder.  
13  
IEC60417  
No.5019  
Protective earth  
To identify any terminal which is intended  
for connection to an external conductor  
for protection against electric shock in  
case of a fault, or the terminal of a  
protective earth electrode.  
14  
15  
IEC60417  
No.5017  
Earth  
To identify an earth (ground) terminal in  
cases where neither the symbol No.13 is  
explicitly required.  
IEC60417  
No.5032  
Alternating current  
To indicate on the rating plate that the  
equipment is suitable for alternating  
current only; to identify relevant  
terminals.  
16  
17  
18  
IEC60417  
No.5031  
Direct current  
To indicate on the rating plate that the  
equipment is suitable for direct current  
only; to identify relevant terminals.  
IEC60417  
No.5172  
Class II equipment  
To identify equipment meeting the safety  
requirements specified for Class II  
equipment according to IEC 61140.  
ISO 3864  
General prohibition  
To identify actions or operations that are  
prohibited.  
151  
No.  
Symbol  
Approved Standards  
Description  
19  
ISO 3864  
Contact prohibition  
To indicate injury that could occur due to  
touching a specific part of the equipment.  
20  
Never look into the optical lens while the  
projector is on.  
21  
22  
To indicate that the marked item don’t  
place anything on projector.  
ISO3864  
Caution, laser radiation  
IEC60825-1  
To indicate the equipment has a laser  
radiation part.  
23  
ISO 3864  
Disassembly prohibition  
To indicate a risk of injury, such as  
electric shock, if the equipment is  
disassembled.  
Parent topic: Notices  
FCC Compliance Statement  
For United States Users  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant  
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no guarantee that interference will not occur in  
a particular installation. If this equipment does cause interference to radio and television reception, which  
can be determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
152  
 
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
WARNING  
The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC  
Certification or Declaration of this device and may cause interference levels which exceed the limits  
established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded  
equipment interface cable with this device. If this equipment has more than one interface connector, do  
not leave cables connected to unused interfaces. Changes or modifications not expressly approved by  
the manufacturer could void the user’s authority to operate the equipment.  
For Canadian Users  
CAN ICES-3(B)/NMB-3(B)  
Parent topic: Notices  
Binding Arbitration and Class Waiver  
1. DISPUTES, BINDING INDIVIDUAL ARBITRATION, AND WAIVER OF CLASS ACTIONS AND  
CLASS ARBITRATIONS  
1.1 Disputes. The terms of this Section 1 shall apply to all Disputes between you and Epson. The term  
"Dispute" is meant to have the broadest meaning permissible under law and includes any dispute, claim,  
controversy or action between you and Epson arising out of or relating to this Agreement, Epson  
branded products (hardware and including any related software), or other transaction involving you and  
Epson, whether in contract, warranty, misrepresentation, fraud, tort, intentional tort, statute, regulation,  
ordinance, or any other legal or equitable basis. "DISPUTE" DOES NOT INCLUDE IP CLAIMS, or more  
specifically, a claim or cause of action for (a) trademark infringement or dilution, (b) patent infringement,  
(c) copyright infringement or misuse, or (d) trade secret misappropriation (an "IP Claim"). You and Epson  
also agree, notwithstanding Section 1.6,that a court, not an arbitrator, may decide if a claim or cause of  
action is for an IP Claim.  
1.2 Binding Arbitration. You and Epson agree that all Disputes shall be resolved by binding arbitration  
according to this Agreement. ARBITRATION MEANS THAT YOU WAIVE YOUR RIGHT TO A JUDGE  
OR JURY IN A COURT PROCEEDING AND YOUR GROUNDS FOR APPEAL ARE LIMITED.  
Pursuant to this Agreement, binding arbitration shall be administered by JAMS, a nationally recognized  
arbitration authority, pursuant to its code of procedures then in effect for consumer related disputes, but  
excluding any rules that permit joinder or class actions in arbitration (for more detail on procedure, see  
Section 1.6 below). You and Epson understand and agree that (a) the Federal Arbitration Act (9 U.S.C.  
§1, et seq.) governs the interpretation and enforcement of this Section 1, (b) this Agreement  
153  
 
memorializes a transaction in interstate commerce, and (c) this Section 1 shall survive termination of this  
Agreement.  
1.3 Pre-Arbitration Steps and Notice. Before submitting a claim for arbitration, you and Epson agree to  
try, for sixty (60) days, to resolve any Dispute informally. If Epson and you do not reach an agreement to  
resolve the Dispute within the sixty (60) days), you or Epson may commence an arbitration. Notice to  
Epson must be addressed to: Epson America, Inc., ATTN: Legal Department, 3840 Kilroy Airport Way,  
Long Beach, CA 90806 (the "Epson Address"). The Dispute Notice to you will be sent to the most recent  
address Epson has in its records for you. For this reason, it is important to notify us if your address  
changes by emailing us at [email protected] or writing us at the Epson Address above. Notice of  
the Dispute shall include the sender's name, address and contact information, the facts giving rise to the  
Dispute, and the relief requested (the "Dispute Notice"). Following receipt of the Dispute Notice, Epson  
and you agree to act in good faith to resolve the Dispute before commencing arbitration.  
1.4 Small Claims Court. Notwithstanding the foregoing, you may bring an individual action in the small  
claims court of your state or municipality if the action is within that court's jurisdiction and is pending only  
in that court.  
1.5 WAIVER OF CLASS ACTIONS AND CLASS ARBITRATIONS. YOU AND EPSON AGREE THAT  
EACH PARTY MAY BRING DISPUTES AGAINST THE OTHER PARTY ONLY IN AN INDIVIDUAL  
CAPACITY, AND NOT AS A PLAINTIFF OR CLASS MEMBER IN ANY CLASS OR  
REPRESENTATIVE PROCEEDING, INCLUDING WITHOUT LIMITATION FEDERAL OR STATE  
CLASS ACTIONS, OR CLASS ARBITRATIONS. CLASS ACTION LAWSUITS, CLASS-WIDE  
ARBITRATIONS, PRIVATE ATTORNEY-GENERAL ACTIONS, AND ANY OTHER PROCEEDING  
WHERE SOMEONE ACTS IN A REPRESENTATIVE CAPACITY ARE NOT ALLOWED.  
ACCORDINGLY, UNDER THE ARBITRATION PROCEDURES OUTLINED IN THIS SECTION, AN  
ARBITRATOR SHALL NOT COMBINE OR CONSOLIDATE MORE THAN ONE PARTY'S CLAIMS  
WITHOUT THE WRITTEN CONSENT OF ALL AFFECTED PARTIES TO AN ARBITRATION  
PROCEEDING.  
1.6 Arbitration Procedure. If you or Epson commences arbitration, the arbitration shall be governed by  
the rules of JAMS that are in effect when the arbitration is filed, excluding any rules that permit arbitration  
on a class or representative basis (the "JAMS Rules"), available at http://www.jamsadr.com or by calling  
1-800-352-5267, and under the rules set forth in this Agreement. All Disputes shall be resolved by a  
single neutral arbitrator, and both parties shall have a reasonable opportunity to participate in the  
selection of the arbitrator. The arbitrator is bound by the terms of this Agreement. The arbitrator, and not  
any federal, state or local court or agency, shall have exclusive authority to resolve all disputes arising  
out of or relating to the interpretation, applicability, enforceability or formation of this Agreement,  
including any claim that all or any part of this Agreement is void or voidable. Notwithstanding this broad  
delegation of authority to the arbitrator, a court may determine the limited question of whether a claim or  
cause of action is for an IP Claim, which is excluded from the definition of "Disputes" in Section 1.1  
above. The arbitrator shall be empowered to grant whatever relief would be available in a court under  
law or in equity. The arbitrator may award you the same damages as a court could, and may award  
154  
declaratory or injunctive relief only in favor of the individual party seeking relief and only to the extent  
necessary to provide relief warranted by that party's individual claim. In some instances, the costs of  
arbitration can exceed the costs of litigation and the right to discovery may be more limited in arbitration  
than in court. The arbitrator's award is binding and may be entered as a judgment in any court of  
competent jurisdiction.  
You may choose to engage in arbitration hearings by telephone. Arbitration hearings not conducted by  
telephone shall take place in a location reasonably accessible from your primary residence, or in Orange  
County, California, at your option.  
a) Initiation of Arbitration Proceeding. If either you or Epson decides to arbitrate a Dispute, both parties  
agree to the following procedure:  
(i) Write a Demand for Arbitration. The demand must include a description of the Dispute and the amount  
of damages sought to be recovered. You can find a copy of a Demand for Arbitration at  
http://www.jamsadr.com ("Demand for Arbitration").  
(ii) Send three copies of the Demand for Arbitration, plus the appropriate filing fee, to: JAMS, 500 North  
State College Blvd., Suite 600 Orange, CA 92868, U.S.A.  
(iii) Send one copy of the Demand for Arbitration to the other party (same address as the Dispute  
Notice), or as otherwise agreed by the parties.  
b) Hearing Format. During the arbitration, the amount of any settlement offer made shall not be disclosed  
to the arbitrator until after the arbitrator determines the amount, if any, to which you or Epson is entitled.  
The discovery or exchange of non-privileged information relevant to the Dispute may be allowed during  
the arbitration.  
c) Arbitration Fees. Epson shall pay, or (if applicable) reimburse you for, all JAMS filings and arbitrator  
fees for any arbitration commenced (by you or Epson) pursuant to provisions of this Agreement.  
d) Award in Your Favor. For Disputes in which you or Epson seeks $75,000 or less in damages exclusive  
of attorney's fees and costs, if the arbitrator's decision results in an award to you in an amount greater  
than Epson's last written offer, if any, to settle the Dispute, Epson will: (i) pay you $1,000 or the amount  
of the award, whichever is greater; (ii) pay you twice the amount of your reasonable attorney's fees, if  
any; and (iii) reimburse you for any expenses (including expert witness fees and costs) that your attorney  
reasonably accrues for investigating, preparing, and pursuing the Dispute in arbitration. Except as  
agreed upon by you and Epson in writing, the arbitrator shall determine the amount of fees, costs, and  
expenses to be paid by Epson pursuant to this Section 1.6d).  
e) Attorney's Fees. Epson will not seek its attorney's fees and expenses for any arbitration commenced  
involving a Dispute under this Agreement. Your right to attorney's fees and expenses under Section  
1.6d) above does not limit your rights to attorney's fees and expenses under applicable law;  
notwithstanding the foregoing, the arbitrator may not award duplicative awards of attorney's fees and  
expenses.  
155  
1.7 Opt-out. You may elect to opt-out (exclude yourself) from the final, binding, individual  
arbitration procedure and waiver of class and representative proceedings specified in this  
Agreement by sending a written letter to the Epson Address within thirty (30) days of your assent  
to this Agreement (including without limitation the purchase, download, installation of the  
Software or other applicable use of Epson Hardware, products and services) that specifies (i)  
your name, (ii) your mailing address, and (iii) your request to be excluded from the final, binding  
individual arbitration procedure and waiver of class and representative proceedings specified in  
this Section 1. In the event that you opt-out consistent with the procedure set forth above, all  
other terms shall continue to apply, including the requirement to provide notice prior to litigation.  
1.8 Amendments to Section 1. Notwithstanding any provision in this Agreement to the contrary, you  
and Epson agree that if Epson makes any future amendments to the dispute resolution procedure and  
class action waiver provisions (other than a change to Epson's address) in this Agreement, Epson will  
obtain your affirmative assent to the applicable amendment. If you do not affirmatively assent to the  
applicable amendment, you are agreeing that you will arbitrate any Dispute between the parties in  
accordance with the language of this Section 1 (or resolve disputes as provided for in Section 1.7, if you  
timely elected to opt-out when you first assented to this Agreement).  
1.9 Severability. If any provision in this Section 1 is found to be unenforceable, that provision shall be  
severed with the remainder of this Agreement remaining in full force and effect. The foregoing shall not  
apply to the prohibition against class or representative actions as provided in Section 1.5. This  
means that if Section 1.5 is found to be unenforceable, the entire Section 1 (but only Section 1)  
shall be null and void.  
Parent topic: Notices  
Trademarks  
EPSON®, Instant Off®, and Quick Corner® are registered trademarks, Epson iProjectionTM is a trademark,  
and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation.  
Accolade® and PrivateLine® are registered trademarks; DuetTM and SizeWiseTM are trademarks; and  
Epson StoreSM and Extra CareSM are service marks of Epson America, Inc.  
Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.  
AndroidTM and ChromebookTM are trademarks of Google Inc.  
HDMI and High-Definition Multimedia Interface are the trademarks or registered trademarks of HDMI  
Licensing LLC.  
Miracast® is a registered trademark of Wi-Fi Alliance®.  
156  
 
General Notice: Other product names used herein are for identification purposes only and may be  
trademarks of their respective owners. Epson disclaims any and all rights in those marks.  
Parent topic: Notices  
Copyright Notice  
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or  
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,  
without the prior written permission of Seiko Epson Corporation. The information contained herein is  
designed only for use with this Epson product. Epson is not responsible for any use of this information as  
applied to other products.  
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third  
parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of:  
accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this  
product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and  
maintenance instructions.  
Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any  
options or any consumable products other than those designated as Original Epson Products or Epson  
Approved Products by Seiko Epson Corporation.  
This information is subject to change without notice.  
Parent topic: Notices  
A Note Concerning Responsible Use of Copyrighted Materials  
Epson encourages each user to be responsible and respectful of the copyright laws when using any  
Epson product. While some countries' laws permit limited copying or reuse of copyrighted material in  
certain circumstances, those circumstances may not be as broad as some people assume. Contact your  
legal advisor for any questions regarding copyright law.  
Parent topic: Copyright Notice  
157  
   
Copyright Attribution  
© 2017 Epson America, Inc.  
8/17  
CPD-53843  
Parent topic: Copyright Notice  
158  
 

Toshiba Air Conditioner Rav Sm1102bt E User Manual
Sanyo Xs1822 User Manual
Philips Scd491 User Manual
Mitsubishi Motors Automobile Parts F5m42 User Manual
GARMIN VIVOKI User Manual
Dig Rbc 7000 User Manual
DELL SC5020 User Manual1
CUB CADET RC60 User Manual
BROTHER HL L2350DW 05 User Manual
BLACK DECKER HSVJ520JS User Manual