EPSON 1080 User Manual

Warranty and Registration Information (U.S. and Canada)

Warranty and Registration Information (Latin America)

Product Box Contents

Save all the packaging in case you need to ship the projector. Always use the original packaging (or

equivalent) when shipping.

Make sure your projector boxes included all of these parts:

Projector

Remote control

Remote control batteries (two AA alkaline)

Power cord

Parent topic: Projector Features

Additional Components

Depending on how you plan to use the projector, you may need to obtain additional components.

Note: To connect a Mac that does not include a compatible video output port, you need to obtain an

adapter that allows you to connect to an input port on the projector. Contact Apple for compatible

adapter options. To connect a smartphone or tablet, you may need to obtain an adapter that allows you

to connect to the projector. This allows you to mirror your smartphone or tablet screens, watch movies,

and more. Contact your device manufacturer for compatible adapter options.

Unless listed as available from Epson in this table, see your local computer or electronics dealer for

purchase information.

Signal or connection

type

Additional component necessary

Composite video

(Home Cinema 1080)

HDMI

Composite RCA cable

Compatible HDMI cable

Available for purchase from Epson or an authorized Epson reseller.

Note: Older Mac computers (2009 and earlier) may not support HDMI

audio.

USB

Compatible USB cable

Audio from certain ports

Commercially available audio cable compatible with your device

Parent topic: Projector Features

Additional Projector Software and Manuals

After connecting and setting up the projector, install the projector software as necessary. You may need

to install it from a software CD, if included, or download the software and manuals as necessary.

You can install the projector software programs listed here and view their manuals for instructions on

using them.

Note: If you still need help after checking this manual and the sources listed here, you can use the

Epson PrivateLine Support service to get help fast (U.S. and Canada only). For details, see "Where to

Get Help."

Projector software

Manual

Description

Epson Projector

Management (Windows

only)

Epson Projector

Management Operation

Guide

Lets you monitor and control your projector

through the network.

You can download the latest software and

documentation from the Epson web site. Go to

epson.com/support (U.S.), epson.ca/support

(Canada), or latin.epson.com/support

(Caribbean) and select your projector.

Epson iProjection

(Windows/Mac)

Epson iProjection

Operation Guide

(Windows/Mac)

Lets you project the computer screens of

users over a network.

You can download the latest software and

documentation from the Epson web site. Go to

epson.com/support (U.S.), epson.ca/support

(Canada), or latin.epson.com/support

(Caribbean) and select your projector.

Epson iProjection app

Instructions are included

Lets you project from an iOS device, Android

with the app (instructions device, or Chromebook if your projector is

included with the app connected to a network that includes a

available only in English) wireless access point.

Visit epson.com/support (U.S.),

epson.ca/support (Canada), or

latin.epson.com/support (Caribbean) for more

information. (Software available only in

English.)

Projector software

Manual

Description

—

Open Source Software

License

You can download this document from the

Epson web site.

Parent topic: Projector Features

Related references

Optional Equipment and Replacement Parts

U.S. and Canada: You can purchase screens, other optional accessories, and replacement parts from

an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766) in the

U.S. or 800-807-7766 in Canada. Or you can purchase online at epsonstore.com (U.S. sales) or

epsonstore.ca (Canadian sales).

Latin America: You can purchase optional accessories and replacement parts from an Epson

authorized reseller. To find the nearest reseller, go to latin.epson.com. Or you can contact your nearest

sales office as described in "Where to Get Help."

Note: Availability of accessories varies by country.

Epson offers the following optional accessories and replacement parts for your projector:

U.S. and Canada:

Option or part

Part number

V13H010L97

V13H134A32

V12H005A02

V12H808001

V12H001K69

V12H759020

V12H757020

V12H758020

Genuine Epson replacement lamp (ELPLP97)

Replacement air filter (ELPAF32)

Wireless LAN module (ELPAP11) for Home Cinema 880

Universal projector mount (ELPMBPJG)

Soft carrying case (ELPKS69)

Epson DC-07 USB document camera (ELPDC07)

Epson DC-13 document camera (ELPDC13)

Epson DC-21 document camera (ELPDC21)

Option or part

Part number

HDMI audio video cable 6 feet (1.8 m) length

AV22300-06

In addition to the accessories listed above, extended service plans are available.

Latin America:

Option or part

Part number

Genuine Epson replacement lamp (ELPLP97)

Replacement air filter (ELPAF32)

V13H010L97

V13H134A32

V12H005A02

Wireless LAN module (ELPAP11) for Home Cinema 880

Parent topic: Projector Features

Warranty and Registration Information (U.S. and Canada)

Your projector comes with a basic warranty that lets you project with confidence. For details, see the

warranty brochure that came with your projector.

Note: Availability varies by region.

In addition, Epson offers free Extra Care Home Service. In the unlikely event of an equipment failure,

you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit

anywhere in the United States, Canada, or Puerto Rico. See the Extra Care Home Service brochure for

details.

Registering also lets you receive special updates on new accessories, products, and services.

Parent topic: Projector Features

Warranty and Registration Information (Latin America)

Your projector comes with a basic warranty that lets you project with confidence. For details, see the

warranty that came with your projector.

Registering also lets you receive special updates on new accessories, products, and services.

Parent topic: Projector Features

Notations Used in the Documentation

Follow the guidelines in these notations as you read your documentation:

• Warnings must be followed carefully to avoid bodily injury.

• Cautions must be observed to avoid damage to your equipment.

• Notes contain important information about your projector.

• Tips contain additional projection information.

Where to Go for Additional Information

Need quick help on using your projector? Here's where to look for help:

• Built-in help system

Press the Home button on the remote control or projector, select Help, and press Enter to get quick

solutions to common problems.

• epson.com/support (U.S.), epson.ca/support (Canada), or latin.epson.com/support (Caribbean)

View FAQs (frequently asked questions) and e-mail your questions to Epson technical support 24

hours a day.

• If you still need help after checking this manual and any other sources listed here, you can use the

Epson PrivateLine Support service to get help fast (U.S. and Canada only). For details, see "Where to

Get Help."

Related references

Projector Parts - Front/Top

Projector Part Locations

Check the projector part illustrations to learn about the parts on your projector.

Projector Parts - Rear

Projector Parts - Base

Projector Parts - Control Panel

Projector Parts - Remote Control

Projector Parts - Front/Top

Exhaust vent

A/V Mute slide lever

Foot release lever

Lens cover

Front adjustable foot

Lens

Remote control receiver

Horizontal keystone slider

Air filter/intake vent

10 Air filter cover

11 Kensington security lock slot

12 Control panel

13 Zoom ring (Home Cinema 1080)

14 Focus ring

15 Lamp cover

Parent topic: Projector Part Locations

Projector Parts - Rear

Home Cinema 880

AC input

Remote receiver

Audio Out port

Speaker

HDMI port

USB-B port

USB-A port

Home Cinema 1080

AC input

Remote receiver

Video port

L and R audio ports

Audio Out port

Speaker

HDMI1 and HDMI2 ports

Computer port

USB-B port

10 USB-A port

Parent topic: Projector Part Locations

Projector Parts - Base

Ceiling mount holes (3)

Security cable attachment point

Rear feet

Front adjustable foot

Note: Use M4×9mm screws for mounting the projector.

Parent topic: Projector Part Locations

Projector Parts - Control Panel

Source Search button (searches for connected video sources)

Enter button (selects options)

Vertical keystone adjustment buttons (displays the adjustment screen and adjusts screen shape)

and arrow buttons

Esc button (cancels/exits functions)

Volume buttons (adjust speaker volume), horizontal keystone adjustment buttons, and arrow

buttons

Menu button (accesses projector menu system)

Home button (displays Home screen)

Power button

Status lights

Parent topic: Projector Part Locations

Related references

Installing Batteries in the Remote Control

Projector Parts - Remote Control

Power button

HDMI button (cycles through connected HDMI sources)

Computer button (cycles through connected computer sources) (Home Cinema 1080)

Numeric buttons (enter numbers when you hold down the Num button)

Auto button (automatically adjusts position, tracking, and sync settings when projecting from a

computer using a VGA cable) (Home Cinema 1080)

Num button (when held down, switches numeric buttons to number function)

Menu button (accesses projector menu system)

Arrow buttons (move through on-screen options)

Enter button (selects options)

10 User button (customizable for different functions)

11 Color Mode button (selects display modes)

12 Aspect button (selects the image aspect ratio)

13 E-Zoom +/– buttons (zoom into and out of the image)

14 A/V Mute button (turns off picture and sound)

15 Split button (splits the screen between two image sources)

16 Home button (accesses source selection, projector help information, and other features)

17 Freeze button (stops video action)

18 Volume up/down buttons (adjust speaker volume)

19 Default button (returns a selected setting to its default)

20 Esc button (cancels/exits functions and controls wireless mouse functions)

21 ID button (selects which projector you want to control)

22 LAN button (cycles through connected network sources)

23 USB button (cycles through connected USB sources)

24 Source Search button (searches for connected sources)

25 Remote control signal emitter (emits remote control signals)

Parent topic: Projector Part Locations

Setting Up the Projector

Follow the instructions in these sections to set up your projector for use.

Projector Placement

Projector Connections

Opening the Lens Cover

Projector Placement

You can place the projector on almost any flat surface to project an image.

You can also install the projector in a ceiling mount if you want to use it in a fixed location.

Keep these considerations in mind as you select a projector location:

• Place the projector on a sturdy, level surface or install it using a compatible mount.

• Place the projector parallel to the screen.

• Leave plenty of space around and under the projector for ventilation, and do not place it on top of or

next to anything that could block the vents.

• Position the projector within reach of a grounded electrical outlet or extension cord.

Projector Setup and Installation Options

Projection Distance

Parent topic: Setting Up the Projector

Projector Setup and Installation Options

You can set up or install your projector in the following ways:

Front

Rear

Front Ceiling

Rear Ceiling

Wherever you set up the projector, make sure to position it squarely in front of the center of the screen,

not at an angle, if possible.

If you project from the ceiling or from the rear, be sure to select the correct Projection option in the

projector's menu system.

Parent topic: Projector Placement

Related references

Connecting to Computer Sources

Projection Distance

The distance at which you place the projector from the screen determines the approximate size of the

image. The image size increases the farther the projector is from the screen, but can vary depending on

the zoom factor, aspect ratio, and other settings.

Use the tables here to determine approximately how far to place the projector from the screen based on

the size of the projected image. (Conversion figures may have been rounded up or down.) You can also

use the Projection Distance Calculator here (U.S.), here (Canada), or here (Caribbean).

Projection distance

Distance from the center of the lens to the base of the image

Center of lens

Home Cinema 880

16:9 Aspect Ratio Image or Screen

Screen or image size

Projection distance (1)

Offset from lens center (2)

Wide to Tele

35 to 48 inches

(90 to 122 cm)

34 inches

–2 inches (–5 cm)

16:9 Aspect Ratio Image or Screen

Screen or image size

Projection distance (1)

Offset from lens center (2)

Wide to Tele

50 inches

52 to 71 inches

(133 to 180 cm)

63 to 85 inches

(160 to 217 cm)

74 to 100 inches

(187 to 283 cm)

84 to 114 inches

(214 to 290 cm)

105 to 143 inches

(268 to 363 cm)

159 to 215 inches

(403 to 545 cm)

212 to 287 inches

(539 to 728 cm)

319 inches

–3.2 inches (–8 cm)

60 inches

–3.5 inches (–9 cm)

–4.3 inches (–11 cm)

–4.7 inches (–12 cm)

–6.3 inches (–16 cm)

–9.1 inches (–23 cm)

–12.2 inches (–31 cm)

–18.5 inches (–47 cm)

–23.6 inches (–60 cm)

70 inches

80 inches

100 inches

150 inches

200 inches

300 inches

386 inches

(809 cm)

410 inches

(1041 cm)

Home Cinema 1080

16:9 Aspect Ratio Image or Screen

Screen or image size

Projection distance (1)

Offset from lens center (2)

Wide to Tele

30 inches

26 to 32 inches

(67 to 81 cm)

–1.2 inches (–3 cm)

40 inches

35 to 43 inches

(90 to 109 cm)

44 to 54 inches

(113 to 136 cm)

53 to 65 inches

(135 to 164 cm)

71 to 86 inches

(181 to 219 cm)

89 to 108 inches

(227 to 275 cm)

135 to 163 inches

(342 to 413 cm)

180 to 217 inches

(457 to 551 cm)

225 to 272 inches

(571 to 690 cm)

270 to 326 inches

(686 to 828 cm)

–1.2 inches (–3 cm)

–1.6 inches (–4 cm)

–2 inches (–5 cm)

50 inches

60 inches

80 inches

–2.8 inches (–7 cm)

–3.1 inches (–8 cm)

–5.1 inches (–13 cm)

–6.7 inches (–17 cm)

–8.3 inches (–21 cm)

–9.8 inches (–25 cm)

100 inches

150 inches

200 inches

250 inches

300 inches

Parent topic: Projector Placement

Projector Connections

See these sections to connect the projector to a variety of projection sources.

Caution: If you will use the projector at altitudes above 4921 feet (1500 m), turn on High Altitude Mode

to ensure the projector's internal temperature is regulated properly.

Connecting to Video Sources

Connecting to External Speakers

Connecting to External USB Devices

Connecting to a Document Camera

Parent topic: Setting Up the Projector

Related references

Connecting to a Computer for USB Video and Audio

Additional Components

Connecting to Computer Sources

Follow the instructions in these sections to connect a computer to the projector.

Connecting to a Computer for VGA Video and Audio

Connecting to a Computer for HDMI Video and Audio

Parent topic: Projector Connections

Connecting to a Computer for USB Video and Audio

If your computer meets the system requirements, you can send video and audio output to the projector

through the computer's USB port (preferably USB 2.0). Connect the projector to your computer using a

USB cable.

Note: A USB connection may cause a delay for content requiring high bandwidth, such as movies. An

HDMI connection is recommended for projecting movies, video games, and other home entertainment

content.

1. Turn on your computer.

2. Connect the cable to your projector's USB-B port.

3. Connect the other end to any available USB port on your computer.

4. Do one of the following:

• Windows 10/Windows 8.x: Click EPSON_PJ_UD when it appears on the desktop, then select

Run EMP_UDSE.EXE in the dialog box that appears to install the Epson USB Display software.

• Windows 7/Windows Vista: Select Run EMP_UDSE.EXE in the dialog box that appears to

install the Epson USB Display software.

• Mac: The USB Display setup folder appears on your screen. Select USB Display Installer and

follow the on-screen instructions to install the Epson USB Display software.

Follow any on-screen instructions. You need to install this software only the first time you connect

the projector to the computer.

The projector displays the image from your computer's desktop and outputs sound, if your presentation

contains audio.

Parent topic: Connecting to Computer Sources

Connecting to a Computer for VGA Video and Audio

You can connect the projector to your computer using a VGA computer cable (Home Cinema 1080).

Note: To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for

video output, you need to obtain an adapter that allows you to connect to the projector's VGA video port.

Contact Apple for compatible adapter options.

1. If necessary, disconnect your computer's monitor cable.

2. Connect the VGA computer cable to your computer's monitor port.

3. Connect the other end to the Computer port on the projector.

4. Tighten the screws on the VGA connector.

5. Connect an audio cable to your laptop's headphone or audio out jack, or your desktop's speaker or

audio out port.

6. Connect the other end to the projector's L and R audio ports.

Parent topic: Connecting to Computer Sources

Connecting to a Computer for HDMI Video and Audio

If your computer has an HDMI port, you can connect it to the projector using an optional HDMI cable.

Note: To connect a Mac that includes only a Mini DisplayPort, Thunderbolt port, or Mini-DVI port for

video output, you need to obtain an adapter that allows you to connect to the projector's HDMI port.

Contact Apple for compatible adapter options.

1. Connect the HDMI cable to your computer's HDMI output port.

2. Connect the other end to the projector's HDMI port.

Note: If you have problems hearing audio through the HDMI connection on the Home Cinema 1080,

connect one end of an optional RCA audio cable to the projector's L and R audio ports and the other end

to your computer's audio out port. Then select the audio port you connected to as the HDMI Audio

Output setting in the Extended menu.

Parent topic: Connecting to Computer Sources

Connecting to Video Sources

Follow the instructions in these sections to connect video devices to the projector.

Connecting to an HDMI Video Source

Connecting to a Composite Video Source

Connecting to a Video Source for Sound

Parent topic: Projector Connections

Connecting to an HDMI Video Source

If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable.

The HDMI connection provides the best image quality.

1. Connect the HDMI cable to your video source's HDMI output port.

2. Connect the other end to the projector's HDMI port.

Note: The projector converts the digital audio signal sent from your video source into a mono analog

signal for the internal speaker or a stereo analog signal if you are connecting to external speakers.

Note: If you have problems hearing audio through the HDMI connection on the Home Cinema 1080,

connect one end of an optional RCA audio cable to the projector's L and R audio ports and the other end

to your computer's audio out port. Then select the audio port you connected to as the HDMI Audio

Output setting in the Extended menu.

Parent topic: Connecting to Video Sources

Connecting to a Composite Video Source

If your video source has a composite video port, you can connect it to the projector using an optional

RCA-style video or A/V cable (Home Cinema 1080).

1. Connect the cable with the yellow connector to your video source's yellow video output port.

2. Connect the other end to the projector's Video port.

Parent topic: Connecting to Video Sources

Connecting to a Video Source for Sound

You can play sound through the projector's speaker system if your video source has audio output ports

(Home Cinema 1080). Connect the projector to the video source using an RCA audio cable.

Note: Make sure the audio cable is labeled "No Resistance."

Note: If you connected your video source to the projector using an HDMI cable, the audio signal is

transferred with the video signal; you do not need an additional cable for sound.

1. Connect the audio cable to your video source's audio-out ports.

2. Connect the other end of the cable to the projector's L and R audio ports.

Parent topic: Connecting to Video Sources

Connecting to External Speakers

You can connect the projector to external self-powered speakers and control the volume using the

projector's remote control.

You can also connect the projector to an amplifier with speakers.

If you want to output audio from the external speakers when the projector is turned off, you need to

select Always On as the A/V Output setting in the projector's Extended menu.

Note: The projector's built-in speaker system is disabled when you connect external speakers.

1. Make sure your computer or video source is connected to the projector with both audio and video

cables as necessary.

2. Locate the appropriate cable to connect your external speakers, such as a stereo mini-jack-to-pin-

jack cable, or another type of cable or adapter.

3. Connect one end of the cable to your external speakers as necessary.

4. Connect the stereo mini-jack end of the cable to your projector's Audio Out port.

Parent topic: Projector Connections

Related references

Connecting a USB Device or Camera to the Projector

Connecting to External USB Devices

Follow the instructions in these sections to connect external USB devices to the projector.

USB Device Projection

Selecting the Connected USB Source

Disconnecting a USB Device or Camera From the Projector

Parent topic: Projector Connections

USB Device Projection

You can project images and other content without using a computer or video device by connecting any of

these devices to your projector:

• USB flash drive

• Digital camera or smartphone

• USB hard drive

Note: Digital cameras or smartphones must be USB-mounted devices, not TWAIN-compliant devices,

and must be USB Mass Storage Class-compliant.

Note: USB hard drives must meet these requirements:

• USB Mass Storage Class-compliant (not all USB Mass Storage Class devices are supported)

• Formatted in FAT or FAT32

• Self-powered by their own AC power supplies (bus-powered hard drives are not recommended)

• Does not have multiple partitions

You can project slide shows from image files on a connected USB device.

Connecting a USB Device or Camera to the Projector

You can connect your USB device or camera to the projector's USB-A port and use it to project images

and other content.

1. If your USB device came with a power adapter, plug the device into an electrical outlet.

2. Connect the USB cable (or USB flash drive) to the projector's USB-A port.

Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not

operate correctly.

3. Connect the other end of the cable (if applicable) to your device.

Selecting the Connected USB Source

You can switch the projector's display to the source you connected to the port.

1. Make sure the connected USB source is turned on, if necessary.

2. Press the USB button on the remote control.

Disconnecting a USB Device or Camera From the Projector

When you finish presenting with a connected USB device or camera, you must prepare to disconnect the

device from the projector.

1. If the device has a power button, turn off and unplug the device.

2. Disconnect the USB device or camera from the projector.

Connecting to a Document Camera

You can connect a document camera to your projector to project images viewed by the camera.

Depending on your Epson document camera model, do one of the following to connect the document

camera to your projector:

• For the Epson DC-07 document camera, locate the USB cable that came with the camera and

connect it to the projector's port and to the document camera's USB Type B port.

• For the Epson DC-13 document camera, connect it to the projector's HDMI, Computer, or Video port

and to the corresponding port on the document camera. See the document camera manual for details.

• For the Epson DC-21 document camera, connect it to the projector's HDMI, Computer, or Video port

and to the corresponding port on the document camera. See the document camera manual for details.

Note: For additional features supported by software, connect your document camera to your computer

instead of the projector. See the document camera manual for details.

Parent topic: Projector Connections

Related references

Wireless Network Projection

Installing Batteries in the Remote Control

The remote control uses the two AA batteries that came with the projector.

Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,

or mix new and old batteries.

1. Remove the battery cover.

2. Insert the batteries with the + and – ends facing as shown.

Warning: Make sure the batteries are inserted in the correct positions. If the batteries are not

inserted correctly, they could explode or leak, causing a fire, injury, or damage to the product.

3. Replace the battery cover and press it down until it clicks into place.

Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat

or flame. Keep batteries out of the reach of children; they are choking hazards and are very

dangerous if swallowed.

Parent topic: Setting Up the Projector

Opening the Lens Cover

To open the projector's lens cover, slide the A/V Mute slide lever until it clicks into the open position.

Parent topic: Setting Up the Projector

Using the Projector on a Network

Follow the instructions in these sections to set up your projector for use on a network.

Setting Up Projector Network E-Mail Alerts

Setting Up Monitoring Using SNMP

Wireless Network Projection from a Mobile Device or Windows Computer (Screen Mirroring)

Controlling a Networked Projector Using a Web Browser

Registering a Digital Certificate on the Projector

Wireless Network Projection

You can project over a wireless network. To do this, you must set up your projector and computer for

wireless projection.

Note: The Epson 802.11b/g/n wireless LAN module is optional for Home Cinema 880. The wireless

module is built-in for Home Cinema 1080.

To connect wirelessly to your projector, configure the connection using the projector's Network menus.

After connecting and setting up the projector, install the projector software. You may need to install it

from a software CD, if included, or download the software and manuals as necessary.

Installing the Wireless LAN Module

Using a QR Code to Connect a Mobile Device

Selecting Wireless Network Settings Manually

Selecting Wireless Network Settings in Windows

Selecting Wireless Network Settings on Mac

Setting Up Wireless Network Security

Related references

Installing the Wireless LAN Module

To use the projector over a wireless network, install the Epson 802.11b/g/n wireless LAN module in the

projector (Home Cinema 880). Do not install any other type of wireless module.

Note: The wireless LAN module is not included with your projector and is optional.

1. Remove the wireless LAN module cover screw.

2. Insert the wireless LAN module into the USB-A port.

3. Attach the wireless LAN module cover and secure it using the screw you removed.

The light on the wireless LAN module turns on when the module is installed and operating. The light

flashes when the module is communicating over the network.

Caution: Never remove the wireless LAN module while its indicator is blue or flashing, or while you are

projecting wirelessly. This could damage the module or lose data.

Parent topic: Wireless Network Projection

Related references

Wireless LAN Menu Settings

Using a QR Code to Connect a Mobile Device

After you select the wireless network settings for your projector, you can display a QR code on the

screen and use it to connect a mobile device using the Epson iProjection app.

Note: Make sure you have installed the latest version of Epson iProjection on your device. Visit

epson.com/iprojection (U.S.), epson.ca/iprojection (Canada), or latin.epson.com/iprojection (Caribbean)

for more information.

1. Press the Menu button.

2. Select the Network menu and press Enter.

3. Select Network Configuration and press Enter.

4. Select the Basic menu and press Enter.

5. Set the Display LAN Info setting to Text & QR Code.

6. Select Complete and follow the on-screen instructions to save your settings and exit the menus.

7. Do one of the following:

• Press the LAN button on the remote control.

• Select Display the QR Code in the projector's Network menu.

Your projector displays the QR code on the projection surface.

Note: If you do not see the QR code after pressing the LAN button, press Enter to display it.

8. Start Epson iProjection on your mobile device.

9. Use the QR code reader feature to read the QR code and connect your device to the projector. Visit

epson.com/iprojection (U.S.), epson.ca/iprojection (Canada), or latin.epson.com/iprojection

(Caribbean) for instructions.

Parent topic: Wireless Network Projection

Selecting Wireless Network Settings Manually

Before you can project from your wireless network, you must select the network settings for the projector

using its menu system.

1. Turn on the projector.

2. Press the Menu button.

3. Select the Network menu and press Enter.

4. Make sure the Wireless LAN Power setting is set to On.

5. Select Network Configuration and press Enter.

6. Select the Basic menu and press Enter.

7. Select the following basic options as necessary:

• Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the

projector over the network.

• Remote Password lets you enter a password up to 8 alphanumeric characters long for accessing

the Remote or Basic Control screen in the Epson Web Control. (Default user name is

EPSONREMOTE; default password is guest.)

• Web Control Password lets you enter a password up to 8 alphanumeric characters long for

accessing the projector over the web. (Default user name is EPSONWEB; default password is

admin.)

• Moderator Password lets you enter a password up to 4 numbers long for accessing the projector

as a moderator with the Epson iProjection (Windows/Mac) software or the Epson iProjection app.

• Projector Keyword lets you turn on a security password to prevent access to the projector by

anyone not in the room with it. The projector displays a random keyword that you must enter from

a computer using the Epson iProjection (Windows/Mac) software or an iOS or Android device, or

on a Chromebook, using the Epson iProjection app.

• Display Keyword lets you display a keyword on the projected image when accessing the

projector from a computer using the Epson iProjection (Windows/Mac) software or an iOS or

Android device, or on a Chromebook, using the Epson iProjection app.

• Display LAN Info lets you select how the projector displays network information. You can select

an option to display a QR code that lets you quickly connect your iOS or Android devices with the

Epson iProjection app.

Note: Use the displayed keyboard to enter the name, passwords and keyword. Press the arrow

buttons on the remote control to highlight characters and press Enter to select them.

8. Select the Wireless LAN menu and press Enter.

9. Select the settings on the Wireless LAN menu as necessary for your network.

10. When you finish selecting settings, select Complete and follow the on-screen instructions to save

your settings and exit the menus.

After you complete the wireless settings for your projector, you need to select the wireless network on

your computer, Chromebook, or iOS or Android device.

Parent topic: Wireless Network Projection

Wireless LAN Menu Settings

Setting

Options

Quick

Description

Connection Mode

Selects the type of wireless

connection:

Advanced

Quick: lets you directly connect

to multiple devices and

computers using the projector's

wireless network; requires the

optional wireless LAN module

(Home Cinema 880)

Advanced: lets you connect to

multiple smartphones, tablets, or

computers via a wireless network

access point

Search Access Point

SSID

To Search View

Search for available wireless

network access points in

Advanced connection mode

Up 32 alphanumeric characters Sets the SSID (network name) of

the wireless LAN system the

projector is connecting to

Security

Open

Selects the type of wireless

security used in the wireless

network (some options are only

available when the Connection

Mode setting is set to

WPA2-PSK

WPA3-PSK

WPA2/WPA3-PSK

WPA3-EAP

Advanced)

WPA2/WPA3-EAP

Passphrase

Between 8 to 63 alphanumeric Enter a paraphrase for the

characters (to enter more than

32 characters, use your Web

browser)

wireless network

Setting

Options

Description

EAP Method

EAP Type

Sets the EAP for WPA2-EAP and

WPA/WPA2-EAP security

User name

Password

Client Certificate

Verify Server Cert.

CA Certificate

RADIUS Serv. Name

Various channels available

Channel

In Quick connection mode,

selects the frequency band

(channel) used by the wireless

LAN

IP Settings

DHCP

Turns on DHCP if your network

assigns addresses automatically;

set to Off to manually enter the

network's IP Address, Subnet

Mask, and Gateway Address

IP Address

Subnet Mask

Gateway Address

SSID Display

Selects whether to display the

SSID on the network standby

screen and the Home screen

Off

IP Address Display

IPv6 Settings

Off

Selects whether to display the IP

address on the network standby

screen and the Home screen

IPv6

Selects the IPv6 settings when

you connect the projector to the

network using IPv6

Auto Configuration

Use Temporary Address

Parent topic: Selecting Wireless Network Settings Manually

Selecting Wireless Network Settings in Windows

Before connecting to the projector, select the correct wireless network on your computer.

1. To access your wireless utility software, access the Desktop and double-click the network icon on

the Windows taskbar.

2. Do one of the following:

• If your projector is set up on an existing network (Advanced mode), select the network name

(SSID).

• If your projector is configured for Quick mode, select the projector's SSID.

3. Click Connect.

Parent topic: Wireless Network Projection

Selecting Wireless Network Settings on Mac

Before connecting to the projector, select the correct wireless network on your Mac.

1. Click the AirPort icon on the menu bar at the top of the screen.

2. Make sure AirPort is turned on, then do one of the following:

• If your projector is set up on an existing network (Advanced mode), select the network name

(SSID).

• If your projector is configured for Quick mode, select the projector's SSID.

Parent topic: Wireless Network Projection

Setting Up Wireless Network Security

You can set up security for your projector to use on the wireless network. Set up one of the following

security options to match the settings used on your network:

• WPA2-PSK security (Quick connection mode)

• WPA3-PSK security (Advanced connection mode)

• WPA2/WPA3-PSK security (Advanced connection mode)

• WPA3-EAP security (Advanced connection mode)

• WPA2/WPA3-EAP security (Advanced connection mode)

Check with your network administrator for guidance on entering the correct information.

1. Press the Menu button.

2. Select the Network menu and press Enter.

3. Select Network Configuration and press Enter.

4. Select the Wireless LAN menu and press Enter.

5. Select the Security setting and press Enter.

6. Select the security settings for your network.

Note: If you select an EAP security method, select EAP Method on the Wireless LAN menu and

change the settings as necessary.

7. When you finish selecting settings, select Complete and follow the on-screen instructions to save

your settings and exit the menus.

Parent topic: Wireless Network Projection

Setting Up Projector Network E-Mail Alerts

You can set up the projector to send you an e-mail alert over the network if there is a problem with the

projector.

1. Press the Menu button.

2. Select the Network menu and press Enter.

3. Select Network Configuration and press Enter.

4. Select the Notifications menu and press Enter.

5. Turn on Mail Notification.

6. Enter the IP address for the SMTP Server setting.

Note: Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a

number from 0 to 255).

7. Select a number for the SMTP server Port Number setting, from 1 to 65535 (default is 25).

8. Enter the sender's email address as the From setting.

9. Choose an Address Setting field, enter the e-mail address, and select or deselect the alerts you

want to receive there. Your e-mail address can be up to 32 alphanumeric characters long. Repeat

for up to three addresses.

10. When you finish selecting settings, select Complete and follow the on-screen instructions to save

your settings and exit the menus.

Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert.

Network Projector E-mail Alert Messages

Network Projector E-mail Alert Messages

When a problem occurs with a networked projector, and you selected to receive e-mail alerts, you

receive an e-mail containing the following information:

• The email address entered as the From setting

• Epson Projector on the subject line

• The name of the projector experiencing a problem

• The IP address of the affected projector

• Detailed information about the problem

Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert.

Parent topic: Setting Up Projector Network E-Mail Alerts

Setting Up Monitoring Using SNMP

Network administrators can install SNMP (Simple Network Management Protocol) software on network

computers so they can monitor projectors. If your network uses this software, you can set up the

projector for SNMP monitoring.

1. Press the Menu button.

2. Select the Network menu and press Enter.

3. Select Network Configuration and press Enter.

4. Select the Notifications menu and press Enter.

5. Turn on the SNMP setting.

6. Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field.

Note: To enter the IP address using the numeric keys on the remote control, press and hold the

Num button. Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x

is a number from 0 to 255).

7. Enter a community name. You can enter up to 32 single-byte alphanumeric characters.

8. If you want this projector to receive broadcasted messages over the network, select the Others

menu and turn on the Message Broadcasting setting. Administrators can broadcast messages over

the network using Epson Projector Management (Windows only).

9. When you finish selecting settings, select Complete and follow the on-screen instructions to save

your settings and exit the menus.

Screen Mirroring Restrictions

Wireless Network Projection from a Mobile Device or Windows Computer

(Screen Mirroring)

You can send images to your projector from mobile devices such as laptops, smartphones, and tablets

using Miracast technology or from a Windows computer (Home Cinema 1080). If your device supports

Miracast, you do not need to install any additional software.

Selecting Screen Mirroring Settings

Connecting for Screen Mirroring with Miracast

Connecting for Screen Mirroring with a Windows 8.x/Windows 10 Computer

Screen Mirroring Restrictions

Note the following when using Screen Mirroring features (Home Cinema 1080):

• You cannot project an interlaced image.

• You cannot play audio with more than 3 channels.

• You cannot project images with a resolution above 1920 × 1080 and a frame rate above 30 fps.

• You cannot project 3D video.

• You cannot use extended Miracast features on Windows 8.1.

• You may not be able to view contents with copyright protection using a Miracast connection.

• Do not change the projector's Screen Mirroring settings during Screen Mirroring projection. Doing so

may cause the projector to disconnect and delay reconnection.

• Do not turn off the electrical supply to the projector during Screen Mirroring projection.

Parent topic: Wireless Network Projection from a Mobile Device or Windows Computer (Screen

Selecting Screen Mirroring Settings

You can select Screen Mirroring settings for your projector and then project images from your mobile

device or computer (Home Cinema 1080).

1. Press the Menu button.

2. Select the Network menu and press Enter.

3. Set the Screen Mirroring setting to On.

4. Select Screen Mirroring Settings and press Enter.

5. Select the Screen Mirroring Settings options as necessary.

6. When you finish selecting settings, select Set and follow the on-screen instructions to save your

settings and exit the menus.

7. Press the Home button on the control panel or remote control.

You see the Display Name you created on the Home screen.

Parent topic: Wireless Network Projection from a Mobile Device or Windows Computer (Screen

Connecting for Screen Mirroring with Miracast

If your mobile device supports Miracast, you can connect it to the projector wirelessly and project images

and sound (Home Cinema 1080).

1. Select the Screen Mirroring settings on your projector as necessary.

2. Press the LAN button on the remote control to switch to the Screen Mirroring source.

You see the Screen Mirroring standby screen.

3. On your mobile device, use the Miracast function to search for the projector.

Note: See your mobile device's documentation for information on accessing the Miracast function.

You see a list of available devices.

4. Select your projector from the list.

5. If you see the PIN entry screen on your mobile device, enter the PIN code displayed on the Screen

Mirroring standby screen or at the bottom right of the projected image.

The projector displays the image from your mobile device.

Caution: It may take some time to establish the connection. Do not disconnect the projector's power

cord while it is connecting to your device. Doing so may cause your device to freeze or malfunction.

Note: Depending on the mobile device, you may need to delete a device when connecting. Follow

the on-screen instructions on your device.

Parent topic: Wireless Network Projection from a Mobile Device or Windows Computer (Screen

Selecting Screen Mirroring Settings

Related tasks

Connecting for Screen Mirroring with a Windows 8.x/Windows 10 Computer

You can set up your computer to wirelessly project images and play sound using Screen Mirroring

(Home Cinema 1080).

1. Select the Screen Mirroring settings on your projector as necessary.

2. Press the LAN button on the remote control to switch to the Screen Mirroring source.

You see the Screen Mirroring standby screen.

3. Do one of the following:

• Windows 10: Open Action Center and select Connect.

• Windows 8.x: Select Devices > Project > Add a wireless display.

4. Select your projector's Display Name from the list.

5. If you see the PIN entry screen on your computer, enter the PIN code displayed on the Screen

Mirroring standby screen or at the bottom right of the projected image.

The projector displays the image from your computer or mobile device.

Note: It may take some time to establish the connection. Do not disconnect the projector's power

cord while it is connecting to your device. This may cause your device to freeze or malfunction.

Parent topic: Wireless Network Projection from a Mobile Device or Windows Computer (Screen

Selecting Screen Mirroring Settings

Related tasks

Controlling a Networked Projector Using a Web Browser

Once you have connected your projector to your network, you can select projector settings and control

projection using a compatible web browser. This lets you access the projector remotely.

Note: The web setup and control features support Microsoft Internet Explorer 11.0 or later, Microsoft

Edge, Chrome, and Safari on networks that do not use a proxy server for connection. You cannot select

all of the projector menu settings or control all projector functions using a web browser.

Note: If you set Standby Mode to Communication On in the ECO menu, you can use a web browser to

select settings and control projection even if the projector is in standby mode.

1. Make sure the projector is turned on.

2. Start your web browser on a computer or device connected to the network.

3. Type the projector's IP address into the browser's address box and press the computer's Enter key.

Note: You may need to log in before you see the Web Control screen. If you see a log in window,

enter your user name and password. (The default user name is EPSONWEB and the default

password is admin.)

You see the Web Control screen.

4. To select projector menu settings, select Advanced to display a list of options.

Note: You may need to log in to access some of the options on the Web Control screen. If you see a

default password is admin.)

5. To control projection remotely, select the Basic Control option from the Web Control screen.

Note: If you see a log in window, enter your user name and password. (The default user name is

EPSONREMOTE and the default password is guest.)

You see a screen like this:

Power button control

Select an HDMI port source

Selects the USB Display source

Selects the USB device source

A/V Mute button contol

Freeze button control

Closed Captioning control

Displays a QR code

Volume button controls

10 Selects the network source

11 Selects the Screen Mirroring source (Home Cinema 1080)

12 Selects the Video port source (Home Cinema 1080)

13 Selects the Computer port source (Home Cinema 1080)

14 Searches for connected sources

6. Select the icon corresponding to the projector function you want to control.

Related references

Solutions When You Cannot Access the Projector Through the Web

Registering a Digital Certificate on the Projector

Follow the instructions here if you need to install a digital certificate on the projector to provide security

for your presentation files.

Note: You can register a digital certificate over a network or from a connected USB device. However, be

sure to register just once from either a USB device or network, or the certificate may not install correctly.

Importing a Web Server Certificate Using the Projector Menus

Registering Digital Certificates from a Web Browser

Digital Certificate Types

Turning Off the Projector

Importing a Web Server Certificate Using the Projector Menus

You can create your web server certificate and import it using the projector menus and a USB flash

drive.

Note: You can also register digital certificates from your web browser. Make sure to only register once,

or the certificate may not install correctly.

1. Make sure your digital certificate file is compatible with projector registration and saved in the root

directory of the USB flash drive.

2. Press the Menu button on the remote control.

3. Select the Network menu and press Enter.

4. Select the Network Configuration setting and press Enter.

5. Select the Others menu and press Enter.

6. Select On as the Secure HTTP setting.

7. Select the Web Server Cert. setting and press Enter.

8. Select Register and press Enter.

9. Remove the screw securing the wireless LAN module port cover, then remove the port cover (Home

Cinema 880).

10. Insert a USB flash drive into the projector's USB-A port. If the wireless LAN module is installed,

remove it before inserting the USB flash drive.

11. Press Enter to display the certificate list.

12. Select the certificate you want to import from the displayed list.

A message is displayed prompting you to enter the password for the certificate.

13. Enter the password and press Enter.

The certificate is imported and a completion message appears.

14. Remove the USB flash drive, then re-insert the wireless LAN module and secure the port cover

(Home Cinema 880).

Parent topic: Registering a Digital Certificate on the Projector

Registering Digital Certificates from a Web Browser

You can register the digital certificates on the projector for wireless LAN authentication.

1. Make sure your digital certificate file is compatible with projector registration.

2. Make sure the projector is turned on.

3. Start your web browser on a computer or mobile device connected to the network.

4. Type the projector's IP address into the browser's address box and press the computer's Enter key.

You see the Web Control screen:

5. Select Advanced.

Note: You may need to log in to access some of the options on the Web Control screen. If you see a

default password is admin.)

6. Under Network, select Certificate.

7. Click the Choose File button, select the certificate file, and click Open.

8. Enter a password in the Password box and click Send.

9. When you finish registering the certificate, click Apply to finalize your changes and complete the

registration.

Parent topic: Registering a Digital Certificate on the Projector

Digital Certificate Types

You can register these types of digital certificates.

Client Certificate (PEAP-TLS/EAP-TLS)

Specification

Format

Description

PKCS#12

Extension

Encryption

Hashes

PFX, P12

RSA

MD5/SHA-1/SHA-256/SHA-384/SHA-512

512/1024/2048/4096 bit

Up to 32 alphanumeric characters; required

Key length

Password

CA Certificate (PEAP/PEAP-TLS/EAP-TLS/EAP-FAST)

Specification

Format

Description

X509v3

Extension

Encryption

Hashes

DER/CER/PEM

RSA

MD5/SHA-1/SHA-256/SHA-384/SHA-512

Specification

Key length

Encoding

Description

512/1024/2048/4096 bit

BASE64/Binary

Web Server Certificate (Secure HTTP)

Specification

Format

Description

PKCS#12

Extension

Encryption

Hashes

PFX, P12

RSA

MD5/SHA-1/SHA-256/SHA-384/SHA-512

512/1024/2048/4096 bit

Network host name

Key length

Common name

Organization

Password

Optional

Up to 32 alphanumeric characters; required

Parent topic: Registering a Digital Certificate on the Projector

Using Basic Projector Features

Follow the instructions in these sections to use your projector's basic features.

Turning On the Projector

Setting the Date and Time

Selecting the Language for the Projector Menus

Adjusting the Image Height

Image Shape

Resizing the Image with the Zoom Ring

Focusing the Image Using the Focus Ring

Remote Control Operation

Selecting an Image Source

Projection Modes

Image Aspect Ratio

Color Mode

Controlling the Volume with the Volume Buttons

Projecting a Slideshow

Turning On the Projector

Turn on the computer or video equipment you want to use before you turn on the projector so it can

display the image source.

1. Open the projector's lens cover.

2. Connect the power cord to the projector's power inlet.

3. Plug the power cord into an electrical outlet.

Note: With Direct Power On turned on, the projector turns on as soon as you plug it in.

The projector's power light turns blue. This indicates that the projector is receiving power.

4. Press the power button on the projector or the remote control to turn on the projector.

The projector beeps and the Status light flashes blue as the projector warms up. Once the projector

is warmed up, the Status light stops flashing and turns blue.

Warning: Never look into the projector lens when the lamp is on. This can damage your eyes and is

especially dangerous for children.

Caution: Turning the power on and off frequently may shorten the lamp's operating life.

If you do not see a projected image right away, try the following:

• Verify the lens cover is open all the way.

• Turn on the connected computer or video device.

• Insert a DVD or other video media and press the play button, if necessary.

• Change the screen output from the computer when using a laptop.

• Press the Source Search button on the projector or remote control to detect the video source.

• Press the button for the video source on the remote control.

• If the Home screen is displayed, select the source you want to project.

Using the Home Screen

Selecting an Image Source

Related tasks

Opening the Lens Cover

Using the Home Screen

You can select input sources and other frequently used options from the Home screen.

1. To display the Home screen, do one of the following:

• Press the Home button on the remote control.

• Turn on the projector with the Home Screen Auto Disp setting enabled.

• Turn on the projector when no signal is received from the selected input source.

2. Press the arrow buttons on the remote control or control panel to navigate the screen, and press

Enter to select an option.

Select the video source you want to project

Display the Connection Guide

Display the Help screen

Display the projector's menus

Select customizable menu options

Select to project two images from different image sources simultaneously

Correct the image shape

Note: Your Home screen may look different from the illustration shown here. You can select the

customizable menu options using the Custom Function 1 and Custom Function 2 settings in the

Extended menu.

3. Press the Home button to hide the Home screen.

Parent topic: Turning On the Projector

Related references

Turning Off the Projector

Before turning off the projector, shut down any computer connected to it so you can see the computer

display during shutdown.

Note: Turn off this product when not in use to prolong the life of the projector. Lamp life will vary

depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.

Note: When using the A/V Mute feature, the projector lamp is still on. To turn off the lamp, turn off the

projector.

1. Press the power button on the projector or the remote control.

The projector displays a shutdown confirmation screen.

2. Press the power button again. (To leave it on, press any other button.)

The projector beeps twice, the lamp turns off, and the Status light turns off.

Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the

projector for transport right away (if necessary).

Caution: Do not turn the projector on immediately after turning it off. Turning the projector on and off

frequently may shorten the life of the lamp.

3. To transport or store the projector, make sure the Status light is off, then unplug the power cord.

Caution: To avoid damaging the projector or lamp, never unplug the power cord when the Status

light is on or flashing.

4. Close the projector's lens cover.

Related references

Setting the Date and Time

You can set the date and time for the projector (Home Cinema 1080).

Note: If the Schedule Protection setting in the Password Protection screen is enabled, you cannot

change the date and time settings.

1. Press the Menu button.

2. Select the Extended menu and press Enter.

3. Select the Operation setting and press Enter.

4. Select the Date & Time setting and press Enter.

You see a screen like this:

5. Select your date and time settings. Then select Set and press Enter to confirm your changes.

6. When you are finished, press the Menu button to exit.

Date and Time Settings

Date and Time Settings

Settings

Options

Description

Date & Time

Date

Adjusts the projector's date and time

settings

Time

Date and Time: sets the date and time

Time Difference (UTC)

Time Difference (UTC): sets the time

difference from Coordinated Universal

Time

Daylight Saving Time

DST Start

Adjusts the daylight saving time

settings

Daylight Saving Time: enables or

disables daylight saving time

DST End

DST Adjustment (min)

DST Start and DST End: sets the date

and time to start or end daylight saving

time

DST Adjustment (min): sets the

difference between standard and

daylight saving time

Internet Time

Automatically adjusts the time through

an Internet connection

Internet Time Server

Internet Time: turn on this setting to

update the date and time automatically

through an Internet time server

Internet Time Server: sets the IP

address for the Internet time server

Parent topic: Setting the Date and Time

Selecting the Language for the Projector Menus

If you want to view the projector's menus and messages in another language, you can change the

Language setting.

1. Turn on the projector.

2. Press the Menu button.

3. Select the Extended menu and press Enter.

4. Select the Language setting and press Enter.

5. Select the language you want to use and press Enter.

6. Press Menu or Esc to exit the menus.

Adjusting the Image Height

If you are projecting from a table or other flat surface, and the image is too high or low, you can adjust

the image height using the projector's adjustable feet.

1. Turn on the projector and display an image.

2. To adjust the front foot, pull up on the foot release lever and lift the front of the projector.

The foot extends from the projector.

3. Release the lever to lock the foot.

4. If the image is tilted, rotate the rear feet to adjust their height.

If the projected image is unevenly rectangular, you need to adjust the image shape.

Correcting Image Shape with the Horizontal Keystone Slider

Image Shape

You can project an evenly rectangular image by placing the projector directly in front of the center of the

screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off

to the side, you may need to correct the image shape for the best display quality.

When you turn on automatic keystone correction in your projector's Settings menu, your projector

automatically corrects vertical keystone effects when you reposition the projector.

Correcting Image Shape with the Keystone Buttons

Correcting Image Shape with Quick Corner

Correcting Image Shape with the Horizontal Keystone Slider

You can use the projector's horizontal keystone slider to correct the shape of an image that is unevenly

rectangular horizontally, such as when the projector is placed to the side of the projection area.

Note: To provide the best possible image quality, adjust the projector's position to correct the image

shape. If this isn't possible, use the horizontal keystone slider on the projector to correct the image

shape.

1. Turn on the projector and display an image.

Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.

2. Adjust the slider until the image is evenly rectangular.

After correction, your image is slightly smaller.

Parent topic: Image Shape

Correcting Image Shape with the Keystone Buttons

You can use the projector's keystone correction buttons to correct the shape of an image that is

unevenly rectangular on the sides.

Note: To provide the best possible image quality, adjust the projector's position to correct the image

shape. If this isn't possible, use the keystone correction buttons on the projector to correct the image

shape.

1. Turn on the projector and display an image.

Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.

2. Press one of these keystone buttons on the control panel to display the Keystone adjustment

screen.

3. Press a keystone button on the projector's control panel to adjust the image shape.

After correction, your image is slightly smaller.

Note: If the projector is installed out of reach, you can also correct the image shape with the remote

control using the H/V-Keystone settings in the projector menus.

Parent topic: Image Shape

Related references

Correcting Image Shape with Quick Corner

You can use the projector's Quick Corner setting to correct the shape and size of an image that is

unevenly rectangular on all sides.

Note: To provide the best possible image quality, adjust the projector's position to correct the image

shape. If this isn't possible, use the Quick Corner setting to correct the image shape.

1. Turn on the projector and display an image.

Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.

2. Press the Menu button.

3. Select the Settings menu and press Enter.

4. Select the Keystone setting and press Enter.

5. Select the Quick Corner setting and press Enter.

You see the Quick Corner adjustment screen:

6. Use the arrow buttons on the projector or remote control to select the corner of the image you want

to adjust. Then press Enter.

7. Press the arrow buttons to adjust the image shape as necessary.

8. When you are finished, press Esc.

Parent topic: Image Shape

Resizing the Image with the Zoom Ring

You can resize the image using the projector's zoom ring (Home Cinema 1080).

Note: You can also use the E-Zoom buttons on the remote control to resize the image.

1. Turn on the projector and display an image.

2. To enlarge or reduce the image size, rotate the projector's zoom ring.

Zooming Into and Out of Images

Related tasks

Focusing the Image Using the Focus Ring

You can correct the focus using the focus ring.

1. Turn on the projector and display an image.

Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.

2. To sharpen the image focus, rotate the projector’s focus ring.

Home Cinema 880

Home Cinema 1080

Remote Control Operation

The remote control lets you control the projector from almost anywhere in the room. You can point it at

the screen, or the front or back of the projector.

Make sure that you aim the remote control at the projector's receivers within the distance and angles

listed here.

30°

19.7 feet (6 m)

15°

Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or

the projector may not respond to commands. If you will not use the remote control for a long time,

remove the batteries.

Selecting an Image Source

If you connected multiple image sources to the projector, such as a computer and DVD player, you may

want to switch from one image source to the other.

Note: If you turned on the Auto Source Search setting in the Extended menu, the projector

automatically switches to another detected image source if the signal to the current image source is lost.

1. Make sure the connected image source you want to use is turned on.

2. For video image sources, insert a DVD or other video media and press its play button, if necessary.

3. Do one of the following:

• Press the Source Search button on the projector or the Search button on the remote control until

you see the image from the source you want.

• Press the button for the source you want on the remote control.

HDMI port sources

Computer port source (Home Cinema 1080)

USB port sources (computer display and external devices)

Network (LAN) port source

• Press the Home button on the remote control and select your image source.

Changing the Projection Mode Using the Remote Control

Projection Modes

Depending on how you positioned the projector, you may need to change the projection mode so your

images project correctly.

• Front (default setting) lets you project from a table in front of the screen.

• Front/Ceiling flips the image over top-to-bottom to project upside-down from a ceiling or wall mount.

• Rear flips the image horizontally to project from behind a translucent screen.

• Rear/Ceiling flips the image over top-to-bottom and horizontally to project from the ceiling and behind

a translucent screen.

Changing the Projection Mode Using the Menus

Changing the Image Aspect Ratio

Changing the Projection Mode Using the Remote Control

You can change the projection mode to flip the image over top-to-bottom.

1. Turn on the projector and display an image.

2. Hold down the A/V Mute button on the remote control for 5 to 10 seconds.

The image disappears briefly and reappears flipped top-to-bottom.

3. To change projection back to the original mode, hold down the A/V Mute button for 5 to 10 seconds

again.

Parent topic: Projection Modes

Changing the Projection Mode Using the Menus

You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the

projector menus.

1. Turn on the projector and display an image.

2. Press the Menu button.

3. Select the Extended menu and press Enter.

4. Select the Projection setting and press Enter.

5. Select a projection mode and press Enter.

6. Press Menu or Esc to exit the menus.

Parent topic: Projection Modes

Image Aspect Ratio

The projector can display images in different width-to-height ratios called aspect ratios. Normally the

input signal from your video source determines the image's aspect ratio. However, for certain images

you can change the aspect ratio to fit your screen by pressing a button on the remote control.

If you always want to use a particular aspect ratio for a certain video input source, you can select it using

the projector's menus.

Available Image Aspect Ratios

Changing the Image Aspect Ratio

You can change the aspect ratio of the displayed image to resize it.

1. Turn on the projector and switch to the image source you want to use.

2. Press the Aspect button on the remote control.

The shape and size of the displayed image changes, and the name of the aspect ratio appears

briefly on the screen.

3. To cycle through the available aspect ratios for your input signal, press the Aspect button

repeatedly.

Note: If you are projecting from a computer and parts of the image are cut off, set the Resolution

setting to Wide or Normal in the Signal menu.

Parent topic: Image Aspect Ratio

Related references

Available Image Aspect Ratios

You can select the following image aspect ratios, depending on the input signal from your image source.

Note: Black bands and cropped images may project in certain aspect ratios, depending on the aspect

ratio and resolution of your input signal.

Aspect ratio setting

Auto

Description

Automatically sets the aspect ratio according to the input signal and

the Resolution setting.

Normal

Full

Displays images using the full projection area and maintains the

aspect ratio of the image.

Displays images using the full width of the projection area, but does

not maintain the aspect ratio.

Zoom

Native

Displays images using the full width of the projection area and

maintains the aspect ratio of the image.

Displays images as is (aspect ratio and resolution are maintained).

Note: The Auto aspect ratio setting is available only for HDMI image sources.

Parent topic: Image Aspect Ratio

Color Mode

The projector offers different Color Modes to provide optimum brightness, contrast, and color for a

variety of viewing environments and image types. You can select a mode designed to match your image

and environment, or experiment with the available modes.

If you always want to use a particular color mode for a certain video input source, you can select it using

the projector menus.

Changing the Color Mode

Available Color Modes

Turning On Auto Iris

Changing the Color Mode

You can change the projector's Color Mode using the remote control to optimize the image for your

viewing environment.

1. Turn on the projector and switch to the image source you want to use.

2. If you are projecting from a DVD player or other video source, insert a disc or other video media and

press the play button, if necessary.

3. Press the Color Mode button on the remote control to change the Color Mode.

The image appearance changes and the name of the Color Mode appears briefly on the screen.

4. To cycle through all the available Color Modes for your input signal, press the Color Mode button

repeatedly.

Parent topic: Color Mode

Available Color Modes

You can set the projector to use these Color Modes, depending on the input source you are using:

Color Mode

Dynamic

Description

Best for prioritizing brightness (this is the brightest mode)

Best for projecting vivid images

Bright Cinema

Color Mode

Cinema

Game

Description

Best for movies projected in a dark room

Best for gaming

Parent topic: Color Mode

Turning On Auto Iris

In certain color modes, you can turn on the Auto Iris setting to automatically optimize the image based on

the brightness of the content you project.

1. Turn on the projector and switch to the image source you want to use.

2. Press the Menu button.

3. Select the Image menu and press Enter.

4. Select the Auto Iris setting and choose one of the following:

• Normal for standard brightness adjustment.

• High Speed to adjust brightness as soon as the scene changes.

Note: You can set Auto Iris for each Color Mode that supports the feature. You cannot change the

Auto Iris setting when you are using a Closed Caption setting.

5. Press Menu or Esc to exit the menus.

Parent topic: Color Mode

Related references

Controlling the Volume with the Volume Buttons

You can use the Volume buttons on the remote control or projector to adjust the volume as you project a

presentation with audio. The volume buttons control the projector’s internal speaker system or any

external speakers you connected to the projector.

You must adjust the volume separately for each connected input source.

1. Turn on the projector and start a presentation that includes audio.

2. To lower or raise the volume, press the Volume buttons on the remote control or control panel.

3. To set the volume to a specific level for an input source, use the projector menus.

Supported Slideshow File Types

Projecting a Slideshow

You can use your projector's Slideshow feature whenever you connect a USB device that contains

compatible files. This lets you quickly and easily display the contents of the files and control their display

using the projector's remote control.

Slideshow Precautions

Starting a Slideshow from an External Device

Starting a Movie from an External Device

Slideshow Display Options

Shutting Off the Picture and Sound Temporarily

Slideshow Precautions

Note the following precautions when using Slideshow features:

• You cannot use a USB key for Slideshow features.

• Do not disconnect the USB device while it is being accessed; otherwise, the Slideshow feature may

not operate correctly.

• You may not be able to use the security features on certain USB devices with Slideshow features.

• When connecting a USB device that includes an AC adapter, connect the AC adapter to an electrical

outlet when you use the USB device with your projector.

• Some commercially available USB card readers may not be compatible with your projector.

• The projector can recognize up to five cards inserted into a connected card reader at a time.

• You cannot correct keystone distortion while using the Slideshow feature, so correct the image shape

before you begin your presentation.

• You can use the following features while projecting in using the Slideshow feature:

• Freeze

• A/V Mute

• E-Zoom

Parent topic: Projecting a Slideshow

Supported Slideshow File Types

You can project these types of files using the projector's Slideshow feature.

Note: For best results, place your files on media that is formatted in FAT16/32. If you have trouble

projecting from media formatted for non-Windows file systems, try formatting the media for Windows

instead. You may not be able to use the security features on certain USB storage devices with

Slideshow features. When connecting a USB-compatible hard drive, connect the AC adapter supplied

with the drive. The Slideshow feature may not work with USB device security features.

File type and

extension

Details

Image (.jpg)

Make sure the file is not:

• CMYK format

• Progressive format

• Highly compressed

• Above 8192 × 8192 resolution

Make sure the file resolution is not above 1280 × 800

Make sure the file is not:

• Above 1280 × 800 resolution

• Animated

Image (.bmp)

Image (.gif )

• Interlaced

Image (.png)

Make sure the file resolution is not:

• Above 1920 × 1080

• Interlaced

Motion JPEG

movie (.avi)

Supports only AVI 1.0

Make sure the file is not:

• Saved with an audio codec other than PCM or ADPCM

• Above 1280 × 720 resolution

• Larger than 2GB

Parent topic: Projecting a Slideshow

Starting a Slideshow from an External Device

After connecting a USB device or digital camera to the projector, you can switch to the USB input source

and start your slideshow.

Note: You can change the slideshow operation options or add special effects by highlighting Option at

the bottom of the screen and pressing Enter.

1. Press the USB button on the projector remote control.

The PC Free screen appears.

2. Do the following as necessary to locate your files:

• If you need to display files inside a subfolder on your device, press the arrow buttons to highlight

the folder and press the Enter button.

• To move back up a folder level on your device, highlight Back to Top and press Enter.

• To view additional files in a folder, highlight Next page or Previous page and press Enter.

3. Do one of the following:

• To display an individual image, press the arrow buttons to highlight the image and press Enter.

(Press the Esc button to return to the file list screen.)

• To display a slide show of all the images in a folder, press the arrow buttons to highlight the

Slideshow option at the bottom of the screen and press Enter.

Note: If any file names are longer than 8 characters or include unsupported symbols, the file names

may be shortened or changed only in the screen display.

4. While projecting, use the following commands to control the display as necessary:

• To rotate a displayed image, press the up or down arrow button.

• To move to the next or previous image, press the left or right arrow button.

5. To stop the display, follow the on-screen instructions or press the Esc button.

Parent topic: Projecting a Slideshow

Starting a Movie from an External Device

After connecting a USB device or digital camera to the projector, you can switch to the USB input source

and start your movie.

Note: You can change the operation options by highlighting Option at the bottom of the screen and

pressing Enter.

1. Press the USB button on the projector remote control.

The PC Free screen appears.

2. Do the following as necessary to locate your files:

• If you need to display files inside a subfolder on your device, press the arrow buttons to highlight

the folder and press the Enter button.

• To move back up a folder level on your device, highlight Back to Top and press Enter.

• To view additional files in a folder, highlight Next page or Previous page and press Enter.

3. To play back a movie, press the arrow buttons to highlight the file and press Enter.

Note: If any file names are longer than 8 characters or include unsupported symbols, the file names

may be shortened or changed only in the screen display. If you want to play back all the movies in a

folder in sequence, select the Slideshow option at the bottom of the screen.

4. To stop movie playback, press the Esc button, highlight Exit, and press Enter.

Parent topic: Projecting a Slideshow

Slideshow Display Options

You can select these display options when using the projector's Slideshow feature.

Setting

Options

Description

Display Order

Name Order

Date Order

Displays files in name order

Displays files in date order

Setting

Options

Description

Sort Order

In Ascending

Sorts files in first-to-last order

Sorts files in last-to-first order

Displays a slideshow continuously

Displays a slideshow one time through

Does not display the next file automatically

In Descending

Continuous Play

Off

Screen Switching

Time

1 Second to 60 Seconds

Displays files for the selected time and

switches to the next file automatically; high

resolution images may switch at a slightly

slower rate

Effect

No effect

Wipe

Dissolve

Transitions between images with a wipe effect

Transitions between images with a dissolve

effect

Random

Transitions between images using a random

variety of effects

Parent topic: Projecting a Slideshow

Adjusting Projector Features

Follow the instructions in these sections to use your projector's feature adjustments.

Stopping Video Action Temporarily

Zooming Into and Out of Images

Projector Security Features

Projector Identification System for Multiple Projector Control

Projecting Two Images Simultaneously

Scheduling Projector Events

Copying Menu Settings Between Projectors

Shutting Off the Picture and Sound Temporarily

You can temporarily turn off the projected picture and sound if you want to redirect your audience's

attention during a presentation. Any sound or video action continues to run, however, so you cannot

resume projection at the point that you stopped it.

If you want to display an image such as a company logo or picture when the presentation is stopped, you

can set up this feature using the projector's menus.

Note: If the picture and sound are off for more than 30 minutes, the power automatically turns off. You

can turn this setting on and off using the projector's ECO menu.

Note: The lamp is still lit while using A/V Mute and the lamp hours will continue to accumulate.

1. Press the A/V Mute button on the remote control to temporarily stop projection and mute any sound.

2. To turn the picture and sound back on, press the A/V Mute button again.

100

Note: You can also stop projection using the A/V Mute slide lever on the projector.

Parent topic: Adjusting Projector Features

Related references

Saving a User's Logo Image to Display

Related tasks

Stopping Video Action Temporarily

You can temporarily stop the action in a video or computer presentation and keep the current image on

the screen. Any sound or video action continues to run, however, so you cannot resume projection at the

point that you stopped it.

1. Press the Freeze button on the remote control to stop the video action.

2. To restart the video action in progress, press Freeze again.

Parent topic: Adjusting Projector Features

101

Zooming Into and Out of Images

You can draw attention to parts of a presentation by zooming into a portion of the image and enlarging it

on the screen.

1. Press the E-Zoom + button on the remote control.

The center of the projected image is enlarged.

2. Use the following buttons on the remote control to adjust the zoomed image:

• Use the arrow buttons to position the image area you want to zoom into.

• Press the E-Zoom + button repeatedly to zoom into the image area, enlarging it as necessary.

Press and hold the E-Zoom + button to zoom in more quickly.

• To pan around the zoomed image area, use the arrow buttons.

• To zoom out of the image, press the E-Zoom – button as necessary.

• To return to the original image size, press the Default button.

Parent topic: Adjusting Projector Features

Related tasks

Resizing the Image with the Zoom Ring

102

Projector Security Features

You can secure your projector to deter theft or prevent unintended use by setting up the following

security features:

• Password security to prevent the projector from being turned on, and prevent changes to the startup

screen and other settings.

• Button lock security to block operation of the projector using the buttons on the control panel.

• Security cabling to physically cable the projector in place.

Password Security Types

Locking the Projector's Buttons

Installing a Security Cable

Parent topic: Adjusting Projector Features

Password Security Types

You can set up these types of password security using one shared password:

• Power On Protection password prevents anyone from using the projector without first entering a

password.

• User's Logo Protection password prevents anyone from changing the custom screen the projector

can display when it turns on or when you use the A/V Mute feature. The presence of the custom

screen discourages theft by identifying the projector’s owner.

• Network Protection password prevents anyone from changing the network settings in the projector

menus.

• Schedule Protection password prevents anyone from changing the projector's time or schedule

settings (Home Cinema 1080).

• Screen Mirroring Protec. password prevents anyone from changing the projector's Screen Mirroring

settings (Home Cinema 1080).

Setting a Password

Selecting Password Security Types

Entering a Password to Use the Projector

Saving a User's Logo Image to Display

Parent topic: Projector Security Features

Setting a Password

To use password security, you must set a password.

103

Note: The default password is set to 0000.

1. Hold down the Freeze button on the remote control for about five seconds or until you see this

menu.

2. Press the down arrow to select Password and press Enter.

You see the prompt "Change the password?".

3. Select Yes and press Enter.

4. Press and hold down the Num button on the remote control and use the numeric buttons to set a

four-digit password.

The password displays as **** as you enter it. Then you see the confirmation prompt.

5. Enter the password again.

You see the message "Password accepted."

6. Press Esc to return to the menu.

7. Make a note of the password and keep it in a safe place in case you forget it.

104

Parent topic: Password Security Types

Related tasks

Selecting Password Security Types

After setting a password, you see this menu, allowing you to select the password security types you want

to use.

If you do not see this menu, hold down the Freeze button on the remote control for about five seconds or

until the menu appears.

• To prevent unauthorized use of the projector, select Power On Protection, press Enter, select On,

press Enter again, and press Esc.

• To prevent changes to the User's Logo screen or related display settings, select User's Logo

Protection, press Enter, select On, press Enter again, and press Esc.

• To prevent changes to network settings, select Network Protection, press Enter, select On, press

Enter again, and press Esc.

• To prevent changes to the projector's time or schedule settings, select Schedule Protection, press

Enter, select On, press Enter again, and press Esc.

• To prevent changes to the projector's Screen Mirroring settings, select Screen Mirroring Protec.,

press Enter, select On, press Enter again, and press Esc.

Note: Be sure to keep the remote control in a safe place; if you lose it, you will not be able to enter the

password required to use the projector.

Parent topic: Password Security Types

105

Related tasks

Setting a Password

Entering a Password to Use the Projector

If a password is set up and a Power On Protection password is enabled, you see a prompt to enter a

password whenever you turn on the projector.

You must enter the correct password to use the projector.

1. Press and hold down the Num button on the remote control while you enter the password using the

numeric buttons.

Note: The default password is 0000.

The password screen closes.

106

2. If the password is incorrect, the following may happen:

• You see a "wrong password" message and a prompt to try again. Enter the correct password to

proceed.

• If you enter an incorrect password three times in succession, you see a message telling you that

the projector is locked. After the message is displayed for 5 minutes, the projector enters standby

mode. Unplug the projector, plug in the power cord, and turn on the projector. You see a prompt to

enter the password.

• If you continue to enter an incorrect password many times in succession, the projector displays a

request code and a message to contact Epson Support. Do not attempt to enter the password

again. When you contact Epson Support, provide the displayed request code and proof of

ownership for assistance in unlocking the projector.

Parent topic: Password Security Types

Related references

Unlocking the Projector's Buttons

Saving a User's Logo Image to Display

You can transfer an image to the projector and then display it whenever the projector turns on. You can

also display the image when the projector is not receiving an input signal or when you temporarily stop

projection (using the A/V Mute feature). This transferred image is called the User's Logo screen.

The image you select as the User's Logo can be a photo, graphic, or company logo, which is useful in

identifying the projector's owner to help deter theft. You can prevent changes to the User's Logo by

setting up password protection for it.

Note: When you copy the menu settings from one projector to another using the batch setup feature, the

user logo is also copied. Do not include any information in the user logo that you do not want to share

between multiple projectors.

1. Display the image you want to project as the User's Logo.

107

2. Press the Menu button, select the Extended menu, and press Enter.

3. Select the User's Logo setting and press Enter.

4. Select Start Setting and press Enter.

5. A prompt appears asking if you want to use the displayed image as the user's logo. Select Yes and

press Enter.

6. A prompt appears again asking if you want to use the displayed image as the user's logo. Select Yes

and press Enter.

You see a completion message.

7. Press Esc to return to the Extended menu.

8. Select Display and press Enter.

9. Select when you want to display the User's Logo screen:

• To display it whenever there is no input signal, select Display Background and set it to Logo.

• To display it whenever you turn the projector on, select Startup Screen and set it to On.

• To display it whenever you press the A/V Mute button, select A/V Mute and set it to Logo.

To prevent anyone from changing the User's Logo settings without first entering a password, set a

password and enable User's Logo security.

Parent topic: Password Security Types

108

Locking the Projector's Buttons

You can lock the buttons on the projector's control panel to prevent anyone from using the projector. You

can lock all the buttons or all the buttons except the power button.

Note: The projector can still be operated using the remote control.

1. Press the Menu button.

2. Select the Settings menu and press Enter.

3. Select Lock Setting and press Enter.

4. Select the Control Panel Lock setting and press Enter.

5. Select one of these lock types and press Enter:

• To lock all of the projector's buttons, select Full Lock.

• To lock all buttons except the power button, select Partial Lock.

You see a confirmation prompt.

6. Select Yes and press Enter.

Parent topic: Projector Security Features

109

Unlocking the Projector's Buttons

If the projector's buttons have been locked, hold the Enter button on the projector's control panel for

seven seconds to unlock them. You can also set the Control Panel Lock setting to Off in the Settings

menu.

Parent topic: Locking the Projector's Buttons

Installing a Security Cable

You can install two types of security cables on the projector to deter theft.

• Use the security slot on the projector to attach a Kensington lock. See your local computer or

electronics dealer for purchase information.

• Use the security cable attachment point on the projector to attach a wire cable and secure it to a room

fixture or heavy furniture.

Note: Do not pass drop-prevention cables through the security cable attachment point when mounting

the projector on a wall or ceiling.

Parent topic: Projector Security Features

Projector Identification System for Multiple Projector Control

You can operate multiple projectors using one remote control for more elaborate presentations. To do

this, you assign an identification number to each projector and to the remote control. Then you can

operate all the projectors at once or individually.

110

Setting the Projector ID

Setting the Remote Control ID

Matching Multiple-Projector Display Quality

Parent topic: Adjusting Projector Features

Setting the Projector ID

If you want to control multiple projectors from a remote control, give each projector a unique ID.

1. Press the Menu button.

2. Select the Extended menu and press Enter.

3. Select Projector ID and press Enter.

4. Press the arrow buttons on the remote control to select the identification number you want to use for

the projector. Then press Enter.

Repeat these steps for all the other projectors you want to operate from one remote control.

Note: If you don't know the projector's ID, aim the remote control at the projector and press the ID button

to temporarily display the projector's ID on the screen.

Parent topic: Projector Identification System for Multiple Projector Control

111

Setting the Remote Control ID

The remote control's ID is set to zero by default so it can operate any compatible projector. If you want to

set the remote control to operate only a particular projector, you need to set the remote control's ID to

match the projector's ID.

1. Turn on the projector you want the remote control to operate with exclusively.

2. Make sure you know the projector's ID number as set in the Extended menu Projector ID setting.

Note: If you have forgotten the projector's ID, aim the remote control at the projector and press the

ID button to temporarily display the projector's ID on the screen. If you turn off the Projector ID

setting, the remote control will operate the projector regardless of the ID selected on the remote.

3. Aim the remote control at that projector.

4. Hold down the ID button on the remote control while you press the numeric button that matches the

projector's ID. Then release the buttons.

5. Press the ID button on the remote control to check if the ID-setting process worked.

You see a message displayed by the projector.

• If the remote control is listed as On, the remote control ID is set to operate only the listed projector.

• If the remote control is listed as Off, the remote control ID is not set properly. Repeat the steps

above to set the ID to match the projector you want to control.

Parent topic: Projector Identification System for Multiple Projector Control

Matching Multiple-Projector Display Quality

You can match the display quality of multiple projectors that will project next to each other.

1. Turn on all the projectors on which you want to match the display quality.

2. Set ID numbers on each projector.

112

3. Make sure all projectors are using the same Color Mode setting.

4. Set the remote control ID to match the first projector.

5. Press the Menu button, select the Image menu, and press Enter.

6. Select settings as necessary.

7. Set the remote control ID to match the next projector, then select Image menu adjustments as

necessary to match the projectors' displays.

Note: The brightness and tint may not match exactly even after adjustments. If brightness and tint

differences become more noticeable over time, repeat the adjustments.

Parent topic: Projector Identification System for Multiple Projector Control

Related concepts

Color Mode

113

Projecting Two Images Simultaneously

You can use the split screen feature to simultaneously project two images from different image sources

next to each other. You can control the split screen feature using the remote control or the projector

menus.

Note: While you use the split screen feature, other projector features may not be available and some

settings may be automatically applied to both images.

Note: You cannot use split screen with the following input source combinations:

• Computer and Video

• HDMI1/HDMI2 and Screen Mirroring

• HDMI1 and HDMI2

114

• USB Display and USB/LAN

• USB and LAN

1. Press the Split button on the remote control.

The currently selected input source moves to the left side of the screen.

2. Press the Menu button.

You see this screen:

3. To select an input source for the other image, select the Source setting, press Enter, select the

input source, select Execute, and press Enter. (You can also change image sources, if necessary.)

4. To switch the images, select the Swap Screens setting and press Enter.

115

5. To change the image sizes, select the Screen Size setting, press Enter, select a sizing option,

press Enter, and press Menu to exit.

Note: Depending on the video input signals, the images may not appear at the same size even if you

choose the Equal setting.

6. To choose the audio you want to hear, select the Audio Source setting, press Enter, select an

audio option, press Enter, and press Menu to exit.

7. To align the projected images, select the Align setting, press Enter, select the setting, press Enter,

and press Menu to exit.

8. To exit the split screen feature, press the Split or Esc button.

Parent topic: Adjusting Projector Features

Scheduling Projector Events

You can save a projector command, such as turning the projector on or off or switching input sources, as

an "event." You can schedule when you want the projector to automatically execute the command

(Home Cinema 1080).

Caution: Do not place flammable objects in front of the lens. If you schedule the projector to turn on

automatically, flammable objects in front of the lens could catch on fire.

Note: The Schedule Protection setting in the menu must be turned off to schedule an event.

Saving a Scheduled Event

Viewing Scheduled Events

Editing a Scheduled Event

Parent topic: Adjusting Projector Features

Related tasks

Selecting Password Security Types

Saving a Scheduled Event

You can select projector commands you want to perform and schedule them as an event.

1. Set the date and time in the Date & Time menu.

2. Press the Menu button.

116

3. Select the Extended menu and press Enter.

4. Select the Schedule Settings setting and press Enter.

You see a screen like this:

5. Select the Schedule menu and press Enter.

6. Select Add New and press Enter.

You see a screen like this:

117

7. In the Event Settings section, select the events you want to have occur. (Select No Change for

events that you do not want to occur.)

8. In the Date/Time Settings section, set the date and time for the scheduled events to occur.

9. When you are finished, select Save and press Enter.

10. To schedule more events, repeat the previous steps as necessary.

11. Select Setup complete and select Yes to save your changes.

Parent topic: Scheduling Projector Events

Related tasks

Setting the Date and Time

Viewing Scheduled Events

You can view any currently scheduled events.

1. Press the Menu button.

2. Select the Extended menu and press Enter.

3. Select the Schedule Settings setting and press Enter.

You see a screen like this:

The colored boxes in the calendar indicate the following about the scheduled events:

One-time event

Recurring event

Communication is on/off

118

Event is invalid

Parent topic: Scheduling Projector Events

Editing a Scheduled Event

You can edit any currently scheduled event.

1. Press the Menu button.

2. Select the Extended menu and press Enter.

3. Select the Schedule Settings setting and press Enter.

You see a screen like this:

4. Press the left or right arrow buttons to highlight the date on the calendar containing the scheduled

event you want to edit.

5. Press the up or down arrow buttons to highlight the event you want to edit, and press Esc.

6. Select one of the following:

• On/Off to enable or disable the selected event.

• Edit to edit the settings for the selected event.

• Clear to delete the selected event.

• Add New to add a new scheduled event.

7. When you are finished, select Return and press Enter.

119

8. Select Setup complete and select Yes to save your changes.

Note: To delete all scheduled events, select Schedule Reset and select Yes.

Parent topic: Scheduling Projector Events

Copying Menu Settings Between Projectors

After you select menu settings for your projector, you can transfer them to another projector of the same

model.

Note: Copy the projector's settings before you adjust the projected image using the projector's image

adjustment settings. Any saved User's Logo setting on the projector will transfer to the other projector.

Caution: If the copy process fails due to a power failure, communication error, or for any other reason,

Epson will not be responsible for any repair costs incurred.

The following settings will not transfer between projectors:

• Info menu items

• Network menu settings other than those in the Notifications and Others menus

The following settings will not transfer between projectors if you set the Batch Setup Range setting to

Limited:

• Password Protection settings

• Network menu settings other than those in the Notifications and Others menus

Saving Settings to a USB Flash Drive

Transferring Settings from a USB Flash Drive

Saving Settings to a Computer

Transferring Settings from a Computer

Parent topic: Adjusting Projector Features

Saving Settings to a USB Flash Drive

You can save the projector settings you want to transfer to a USB flash drive.

Note: Use an empty flash drive. If the drive contains other files, the transfer may not complete correctly.

The flash drive must use the FAT format and cannot have any security features.

120

1. Turn off the projector and unplug the power cord from the projector's power inlet.

2. Insert the flash drive into the USB-A port.

Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be

saved correctly.

3. Press and hold the Esc button on the control panel or remote control as you connect the power cord

to the projector's power inlet.

121

4. When all of the projector lights turn on, release the Esc button.

The lights flash to indicate that settings are transferring to the flash drive. When the lights stop

flashing, the power light turns blue and the projector enters standby mode.

Caution: This could damage the projector.

5. Once the projector enters standby mode, remove the flash drive.

Parent topic: Copying Menu Settings Between Projectors

Transferring Settings from a USB Flash Drive

After saving projector settings to a USB flash drive, you can transfer them to another projector of the

same model.

Note: Make sure the USB flash drive contains only a single settings transfer from another projector of

the same model. The settings are contained in a file called pjconfdata.bin. If the drive contains other

files, the transfer may not complete correctly.

Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have

to repeat your adjustments.

1. Turn off the projector and unplug the power cord from the projector's power inlet.

2. Insert the flash drive into the USB-A port.

122

Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be

saved correctly.

3. Press and hold the Menu button on the control panel or remote control as you connect the power

cord to the projector's power inlet.

4. When all of the projector lights turn on, release the Menu button.

The lights flash to indicate that settings are transferring to the projector. When the lights stop

flashing, the power light turns blue and the projector enters standby mode.

Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This

could damage the projector.

5. Once the projector enters standby mode, remove the flash drive.

Parent topic: Copying Menu Settings Between Projectors

Saving Settings to a Computer

You can save the projector settings you want to transfer to a computer.

Your computer must be running one of the following operating systems:

• Windows 7

• Windows 8.x

• Windows 10

• OS X 10.11.x

123

• macOS 10.12.x

• macOS 10.13.x

• macOS 10.14.x

• macOS 10.15.x

1. Turn off the projector and unplug the power cord from the projector's power inlet.

2. Connect a USB cable to your projector's USB-B port.

3. Connect the other end to any available USB port on your computer.

4. Press and hold the Esc button on the control panel or remote control as you connect the power cord

to the projector's power inlet.

124

5. When all of the projector lights turn on, release the Esc button.

The projector shows up as a removable disk on your computer.

6. Open the removable disk and copy the pjconfdata.bin file to your computer.

7. Once the file has copied, do one of the following:

• Windows: Open the My Computer, Computer, Windows Explorer, or File Explorer utility.

Right-click the name of your projector (listed as a removable disk) and select Eject.

• Mac: Drag the removable disk icon for your projector from the desktop into the trash.

The projector enters standby mode.

Parent topic: Copying Menu Settings Between Projectors

Transferring Settings from a Computer

After saving projector settings to a computer, you can transfer them to another projector of the same

model.

Your computer must be running one of the following operating systems:

• Windows 7

• Windows 8.x

• Windows 10

• OS X 10.11.x

• macOS 10.12.x

• macOS 10.13.x

• macOS 10.14.x

• macOS 10.15.x

Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have

to repeat your adjustments.

1. Turn off the projector and unplug the power cord from the projector's power inlet.

125

2. Connect a USB cable to your projector's USB-B port.

3. Connect the other end to any available USB port on your computer.

4. Press and hold the Menu button on the control panel or remote control as you connect the power

cord to the projector's power inlet.

5. When all of the projector lights turn on, release the Menu button.

The projector shows up as a removable disk on your computer.

6. Copy the pjconfdata.bin file from your computer to the removable disk.

Note: Do not copy any other files to the removable disk.

126

7. Once the file has copied, do one of the following:

• Windows: Open the My Computer, Computer, Windows Explorer, or File Explorer utility.

Right-click the name of your projector (listed as a removable disk) and select Eject.

• Mac: Drag the removable disk icon for your projector from the desktop into the trash.

All the lights start flashing to indicate that the projector's settings are being updated. When the lights

stop flashing, the power light turns blue and the projector enters standby mode.

Caution: Do not unplug the power cord while the lights are flashing. This could damage the

projector.

Parent topic: Copying Menu Settings Between Projectors

127

Adjusting the Menu Settings

Follow the instructions in these sections to access the projector menu system and change projector

settings.

Note: Not all settings are available, depending on your projector model.

Using the Projector's Menus

Projector Network Settings - Network Menu

Projector Information Display - Info Menu

Projector Reset Options - Reset Menu

Using the Projector's Menus

You can use the projector's menus to adjust the settings that control how your projector works. The

projector displays the menus on the screen.

128

1. Press the Menu button on the control panel or remote control.

You see the menu screen.

129

2. Press the up or down arrow button to move through the menus listed on the left. The settings for

each menu are displayed on the right.

Note: The available settings depend on the current input source, resolution, your projector model, or

other menu settings.

3. To change settings in the displayed menu, press Enter.

4. Press the up or down arrow button to move through the settings.

5. Change the settings using the buttons listed on the bottom of the menu screens.

6. To return all the menu settings to their default values, select Reset.

7. When you finish changing settings on a menu, press Esc.

8. Press Menu or Esc to exit the menus.

Parent topic: Adjusting the Menu Settings

Image Quality Settings - Image Menu

Settings on the Image menu let you adjust the quality of your image for the input source you are currently

using. The available settings depend on the currently selected input source.

To change settings for an input source, make sure the source is connected and select that source.

130

Setting

Options

Description

Color Mode

See the list of available Color

Modes

Adjusts the vividness of image

colors for various image types

and environments

Brightness

Contrast

Varying levels available

Lightens or darkens the overall

image

Adjusts the difference between

light and dark areas of the image

Color Saturation

Tint

Adjusts the intensity of the

image colors

Adjusts the balance of green to

magenta tones in the image

Sharpness

White Balance

Adjusts the sharpness or

softness of image details

Color Temp.

Custom

Adjusts the overall tint of the

image

Color Temp.: Sets the color

temperature based on the Color

Mode you selected. Higher value

tints the image blue; lower value

tints the image red.

Custom: Adjusts the intensity of

individual hues in the image;

provides RGB-offset and gain

controls for professional level

color calibration

131

Setting

Options

Description

Image Enhancement

Noise Reduction

Reduces flickering in analog

images

Detail Enhancement

Deinterlacing

Creates a more textured image

Sets whether to convert

interlaced to progressive signals

for certain video image types

(for interlaced signal

480t/576t/1080t input)

Off: for fast-moving video

images

Video: for most video images

Film/Auto: for movies, computer

graphics, and animation

Auto Iris

Off

Adjusts the projected luminance

based on the image brightness

when the Dynamic or Cinema

Color Modes are selected; High

Speed sets faster luminance

correction for fast-moving

images

Normal

High Speed

Reset

—

Resets all settings in the Image

menu to their defaults

Note: The Brightness setting does not affect lamp brightness. To change the lamp brightness mode,

use the Power Consumption setting in the ECO menu.

Parent topic: Adjusting the Menu Settings

Related references

Transporting the Projector

Available Color Modes

132

Input Signal Settings - Signal Menu

Normally the projector detects and optimizes the input signal settings automatically. If you need to

customize the settings, you can use the Signal menu. The available settings depend on the currently

selected input source.

Note: You can restore the default settings of the Position, Tracking, and Sync settings by pressing the

Auto button on the remote control (Home Cinema 1080).

To change settings for an input source, make sure the source is connected and select that source.

Setting

Options

Auto

Description

Resolution

Sets the input signal resolution if

not detected automatically using

the Auto option

Wide

Normal

Aspect

See the list of available aspect

ratios

Sets the aspect ratio (width-to-

height ratio) for the selected input

source

Tracking

Varying levels available

Adjusts signal to eliminate vertical

stripes in computer images

(Home Cinema 1080)

133

Setting

Options

Description

Sync.

Varying levels available

Adjusts signal to eliminate

fuzziness or flickering in

computer images

(Home Cinema 1080)

Position

Up, down, left, right

Adjusts the image location on the

screen

(Home Cinema 1080)

Auto Setup

Automatically optimizes computer

image quality (when On)

(Home Cinema 1080)

Overscan

Off

Auto

Changes the projected image

ratio to make the edges visible by

a selectable percentage or

automatically when using an

HDMI input source

Off

Advanced

Video Range

Sets the video range to match the

setting of the device connected to

the HDMI input port.

Video Signal

Specifies the signal type from the

input sources connected to the

video ports. Select Auto to detect

signals automatically.

Reset

—

Resets all settings in the Signal

menu to their defaults

Parent topic: Adjusting the Menu Settings

134

Projector Feature Settings - Settings Menu

Options on the Settings menu let you customize various projector features. The available settings

depend on the currently selected input source.

Setting

E-Zoom

Options

Description

Varying levels available

Adjusts the size of the projected

image

Keystone

H/V Keystone

Quick Corner

Adjusts image shape to

rectangular (horizontally and

vertically)

H/V Keystone: lets you manually

correct horizontal and vertical

sides

Auto V-Keystone: turns

automatic correction on or off

H-Keystone Adjuster: turns

horizontal keystone slider feature

on or off

Quick Corner: select to correct

image shape and alignment

using an on-screen display

135

Setting

Options

Description

Split Screen

Screen Size

Divides the viewing area

horizontally and displays two

images side-by-side (press Esc

to cancel split screen display)

Source

Swap Screens

Audio Source

Align

Display the QR Code

Exit Split Screen

Varying levels available

Volume

Adjusts the volume of the

projector’s speaker system; you

can set the volume level for each

input source separately

Lock Setting

Control Panel Lock

Controls projector button locking

to secure the projector

Full Lock: locks all buttons

Partial Lock: locks all buttons

except the power button

Off: no buttons locked

Remote Receiver

Front/Rear

Front

Limits reception of remote control

signals by the selected receiver;

Off turns off all receivers

Rear

Off

136

Setting

Options

Description

User Button

Power Consumption

Info

Assigns a menu option to the

User button on the remote

control for one-touch access

Deinterlacing

Closed Caption

Test Pattern

Resolution

Pattern Display

Display the QR Code

Pattern Display

Pattern Type

User Pattern

Test Pattern

—

Pattern

Reset

Selects various pattern display

options

Resets all settings in the

Settings menu to their defaults

Parent topic: Adjusting the Menu Settings

137

Projector Setup Settings - Extended Menu

Settings on the Extended menu let you customize various projector setup features that control its

operation.

Setting

Options

Description

Home Screen

Home Screen Auto Disp.

Custom Function 1

Custom Function 2

Select various options for the projector's Home

screen

Home Screen Auto Disp.: controls whether

the Home screen displays automatically when

the projector is turned on

Custom Function 1/Custom Function 2: lets

you customize the options displayed on the

Home screen and save your settings as a

preset

138

Setting

Display

Options

Description

Messages

Selects various display options

Display Background

Startup Screen

A/V Mute

Messages: controls whether messages are

displayed on the screen

Display Background: selects the screen

color or logo to display when no signal is

received

Startup Screen: controls whether a special

screen appears when the projector starts up

A/V Mute: selects the screen color or logo to

display when A/V Mute is turned on

Closed Caption

Off

Controls use of closed captions and selects

the closed caption type (closed captions are

visible only for NTSC signals connected

through the Video port)

(Home Cinema 1080) CC1

CC2

User's Logo

Projection

—

Creates a screen that the projector displays to

identify itself and enhance security

Front

Selects the way the projector faces the screen

so the image is oriented correctly

Front/Ceiling

Rear

Rear/Ceiling

139

Setting

Options

Description

Operation

Direct Power On

High Altitude Mode

Auto Source Search

Auto Power On

HDMI EQ Setting

Advanced

Selects various operation options

Direct Power On: turns on the projector when

you plug it in

High Altitude Mode: regulates the projector’s

operating temperature at altitudes above 4921

feet (1500 m)

Auto Source Search: automatically detects

the image signal being input when the

projector is turned on

Date & Time (Home Cinema

1080)

Auto Power On: automatically turns on the

projector when it receives an image signal

(available only when Standby Mode is set to

Communication On)

HDMI EQ Setting: adjusts the HDMI input

signal level depending on the connected

device

Advanced: choose to set a location to save

error files, or copy all projector menu settings

Date & Time: adjusts the projector's system

time and date settings

A/V Settings

A/V Output

Selects the following when the projector is in

standby mode (turned off) and the Standby

Mode setting in the ECO menu is set to

Communication On:

Audio Output

A/V Output: Always On outputs sound and

images to external equipment when the

projector is turned off; images must be from an

analog signal (VGA only through the Monitor

Out port)

Audio Output: selects the audio source for

sound; Auto outputs sound from the last

selected image source; HDMI Audio Output

selects the audio source for HDMI images

140

Setting

Options

Off

Description

Projector ID

Sets the projector to a particular ID number

which allows you to use a remote control to

individually control projectors

1 through 9

Schedule Settings Schedule

(Home Cinema 1080) Schedule Reset

Setup Complete

Schedules projector events to occur

automatically at selected dates and times

Language

Various languages available

Selects the language for projector menu and

message displays (not changed by Reset

option)

Reset

—

Resets all settings in the Extended menu to

their defaults, except for the following settings:

User's Logo, Projection, High Altitude

Mode, Auto Source Search, HDMI EQ, Date

& Time, A/V Output, Projector ID, Schedule

Settings, and Language

Parent topic: Adjusting the Menu Settings

Projector Network Settings - Network Menu

Settings on the Network menu let you view network information and set up the projector for monitoring

and control over a network.

141

Setting

Options

Description

Screen Mirroring

(Home Cinema 1080)

Screen Mirroring Info

(Home Cinema 1080)

Off

Turns on screen mirroring mode

Display Name

MAC Address

Region Code

Channel

Displays screen mirroring status

and details

Connected Device

Screen Mirroring Settings

Various screen mirroring options Configures your screen mirroring

settings; only available when

Screen Mirroring On is turned

(Home Cinema 1080)

Wireless LAN Power

Turns on wireless LAN mode

Off

Net. Info - Wireless LAN

Connection mode

Wireless LAN Sys.

Antenna Level

Projector Name

SSID

Displays wireless network status

and details

DHCP

IP Address

Subnet Mask

Gateway Address

MAC Address

Region Code

IPv6

142

Setting

Options

Description

Display the QR Code

—

Displays a QR code for

connecting with iOS or Android

devices using the Epson

iProjection app

Network Configuration

Accesses additional network

menus

Configures your network settings

Parent topic: Adjusting the Menu Settings

Projector Setup Settings - ECO Menu

Settings on the ECO menu let you customize projector functions to save power. When you select a

power-saving setting, a leaf icon appears next to the menu item.

143

Setting

Options

Normal

ECO

Description

Power Consumption

Selects the brightness mode of

the projector lamp. Select ECO to

reduce lamp brightness and fan

noise, and save power and lamp

life.

Note: You cannot select these

settings when operating your

projector at high altitude or high

temperature.

Light Optimizer

Sleep Mode

Off

When Power Consumption is

set to High or Medium and Auto

Iris is turned off, the lamp

brightness is adjusted based on

the projected image; you can set

this option for each color mode

Off

Automatically places the

projector in standby mode after

an interval of inactivity

Sleep Mode Timer

Lens Cover Timer

1 to 30 minutes

Sets the interval for Sleep Mode

Off

Automatically turns off the

projector after 30 minutes if the

lens cover is closed

A/V Mute Timer

Standby Mode

Off

Automatically turns off the

projector after 30 minutes if

A/V Mute is enabled

Communication On

Communication Off

Communication On: indicates

that the projector can be

monitored and controlled over a

network when the projector is in

standby mode (available when

A/V Output is set to Always On

or While Projecting)

144

Setting

Options

Description

ECO Display

Displays a leaf icon in the bottom

left corner of the projected screen

to indicate the power-saving

status when the lamp brightness

changes

Off

Reset

—

Resets all settings in the ECO

menu to their defaults

Parent topic: Adjusting the Menu Settings

Projector Information Display - Info Menu

You can display information about the projector and input sources by viewing the Info menu. However,

you cannot change any settings in the menu.

Note: Available settings depend on the current input source. The lamp usage timer does not register any

hours until you have used the lamp for at least 10 hours.

Information item

Projector Info

Version

Description

See the table below

Displays the projector's firmware version

145

Information item

Description

Temp Warning Info

(Home Cinema 1080)

Power On/Off History

(Home Cinema 1080)

Displays various high temperature warnings

Displays the projector's power on and power off history

Projector Info menu

Information item

Lamp Hours

Description

Displays the number of hours (H) the lamp has been used in Power

Consumption modes; if the information is displayed in yellow, obtain

a genuine Epson replacement lamp soon

Source

Displays the name of the port to which the current input source is

connected

Input Signal

Resolution

Refresh Rate

Sync Info

Status

Displays the input signal setting of the current input source

Displays the resolution of the current input source

Displays the refresh rate of the current input source

Displays information that may be needed by a service technician

Displays information about projector problems that may be needed

by a service technician

Serial Number

Event ID

Displays the projector's serial number

Displays the Event ID number corresponding to a specific projector

problem; see the list of Event ID codes

Event ID Code List

Parent topic: Adjusting the Menu Settings

Event ID Code List

If the Event ID option on the Info menu displays a code number, check this list of Event ID codes for the

solution to the projector problem associated with the code.

146

Event ID code

0432

Cause and solution

The network software did not start. Turn the projector off and then on again.

0435

0433

Cannot display the transferred images. Restart the network software.

0434

Unstable network communication. Check the network communication status, wait a

few moments, and try connecting to the network again.

0481

0482

0485

0483

The network software quit unexpectedly. Check the network communication status,

then turn the projector off and then on again.

04FE

0484

Communication with computer was disconnected. Restart the network software.

A projector system error has occurred. Turn the projector off and then on again.

0479

04FF

0891

Cannot find an access point with the same SSID. Set your computer, access point,

and projector to the same SSID.

0892

0893

0894

0895

0898

The WPA/WPA2/WPA3 authentication type does not match. Make sure the wireless

network security settings are correct.

The TKIP/AES encryption type does not match. Make sure the wireless network

security settings are correct.

Communication with unauthorized access point was disconnected. Contact your

network administrator.

Communication with a connected device was disconnected. Check your device

connection status.

Failed to acquire DHCP address. Make sure the DHCP server is operating correctly.

If you are not using DHCP, turn off the DHCP setting in the Network menus.

0899

089A

A communication error has occurred.

The EAP authentication type does not match the network. Check the wireless LAN

security settings and make sure that the security certificate is installed correctly.

089B

EAP server authentication failed. Check the wireless LAN security settings and

make sure that the security certificate is installed correctly.

147

Event ID code

Cause and solution

089C

EAP client authentication failed. Check the wireless LAN security settings and make

sure that the security certificate is installed correctly.

089D

Key exchange failed. Check the wireless LAN security settings and make sure that

the security certificate is installed correctly.

Parent topic: Projector Information Display - Info Menu

Projector Reset Options - Reset Menu

You can reset most of the projector settings to their default values using the Reset All Config option on

the Reset menu.

You can also reset the projector's lamp usage timer to zero when you replace the lamp using the Reset

Lamp Hours option.

You cannot reset the following settings using the Reset All Config option:

• E-Zoom

• User's Logo

• Schedule Settings (Home Cinema 1080)

• Language

• Network menu items

148

• Lamp Hours

• Password

• Date & Time (Home Cinema 1080)

• Display Background

• Startup Screen

• A/V Mute

Parent topic: Adjusting the Menu Settings

149

Maintaining and Transporting the Projector

Follow the instructions in these sections to maintain your projector and transport it from place to place.

Projector Maintenance

Projector Maintenance

Your projector needs little maintenance to keep working at its best.

You may need to clean the lens periodically, and clean the air filter and air vents to prevent the projector

from overheating due to blocked ventilation.

The only parts you should replace are the lamp, air filter, and remote control batteries. If any other part

needs replacing, contact Epson or an authorized Epson servicer.

Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open

any cover on the projector, except as specifically explained in this manual. Dangerous electrical voltages

in the projector can injure you severely.

Warning: Do not try to service this product yourself, except as specifically explained in this manual.

Refer all other servicing to qualified servicers.

Cleaning the Lens

Cleaning the Projector Case

Air Filter and Vent Maintenance

Projector Lamp Maintenance

Replacing the Remote Control Batteries

Parent topic: Maintaining and Transporting the Projector

Cleaning the Lens

Clean the projector's lens periodically, or whenever you notice dust or smudges on the surface.

• To remove dust or smudges, gently wipe the lens with lens-cleaning paper.

150

• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the

lens. Do not spray any liquid directly on the lens.

Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the

projector lamp may cause a fire.

Caution: Do not use glass cleaner or any harsh materials to clean the lens and do not subject the lens

to any impacts; you may damage it. Do not use canned air, or the gases may leave a residue. Avoid

touching the lens with your bare hands to prevent fingerprints on or damage to the lens surface.

Parent topic: Projector Maintenance

Cleaning the Projector Case

Before cleaning the projector case, turn off the projector and unplug the power cord.

• To remove dust or dirt, use a soft, dry, lint-free cloth.

• To remove stubborn dirt, use a soft cloth moistened with water and mild soap. Do not spray liquid

directly on the projector.

Caution: Do not use wax, alcohol, benzine, paint thinner, or other chemicals to clean the projector

case. These can damage the case. Do not use canned air, or the gases may leave a flammable

residue.

Parent topic: Projector Maintenance

Air Filter and Vent Maintenance

Regular filter maintenance is important to maintaining your projector. Your Epson projector is designed

with an easily accessible, user-replaceable filter to protect your projector and make regular maintenance

simple. Filter maintenance intervals will depend on the environment.

If regular maintenance is not performed, your Epson projector will notify you when the temperature

inside the projector has reached a high level. Do not wait until this warning appears to maintain your

projector filter as prolonged exposure to high temperatures may reduce the life of your projector or lamp.

Damage due to the failure to properly maintain the projector or its filter may not be covered by the

projector or lamp Limited Warranties.

Cleaning the Air Filter and Vents

Replacing the Air Filter

Parent topic: Projector Maintenance

151

Related references

Cleaning the Air Filter and Vents

Clean the projector's air filter or vents if they get dusty, or if you see a message telling you to clean them.

1. Turn off the projector and unplug the power cord.

2. Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as

a paintbrush).

Note: You can remove the air filter so you can clean both sides of it. Do not rinse the air filter in

water or use any detergent or solvent to clean it.

Caution: Do not use canned air. The gases may leave a flammable residue or push dust and debris

into the projector's optics or other sensitive areas.

3. If dust is difficult to remove or the air filter is damaged, replace the air filter.

Parent topic: Air Filter and Vent Maintenance

Replacing the Air Filter

You need to replace the air filter in the following situations:

• After cleaning the air filter, you see a message telling you to clean or replace it

• The air filter is torn or damaged

You can replace the air filter while the projector is mounted to the ceiling or placed on a table.

1. Turn off the projector and unplug the power cord.

152

2. Carefully open the air filter cover.

153

3. Pull the air filter out of the projector.

Note: Air filters contain ABS resin and polyurethane foam. Dispose of used air filters according to

local regulations.

154

4. Place the new air filter in the projector as shown and push gently until it clicks into place.

5. Close the air filter cover.

Parent topic: Air Filter and Vent Maintenance

Related references

Projector Information Display - Info Menu

Projector Lamp Maintenance

The projector keeps track of the number of hours the lamp is used and displays this information in the

projector's menu system.

Replace the lamp as soon as possible when the following occurs:

• The projected image gets darker or starts to deteriorate

• A message appears when you turn on the projector telling you to replace the lamp

• The projector's Lamp light is flashing orange and its power light is flashing blue

155

Caution: If you continue to use the lamp after the above conditions occur, the possibility that the lamp

may explode increases. When the lamp replacement message appears, replace the lamp with a new

one as soon as possible, even if it is still working. You should always have a spare lamp unit ready in

case it is needed.

Caution: Do not repeatedly turn the projector power on and off. This may shorten the lamp's operating

life.

Note: We recommend the use of genuine Epson replacement lamps. The use of non-genuine lamps

may affect projection quality and safety. Any damage or malfunction caused by the use of non-genuine

lamps may not be covered by Epson's warranty.

Replacing the Lamp

Resetting the Lamp Timer

Parent topic: Projector Maintenance

Related references

Replacing the Lamp

Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.

Warning: Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted to the ceiling, if necessary.

1. Turn off the projector and unplug the power cord.

2. Allow the projector lamp to cool down for at least one hour.

156

3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp

cover.

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful

removing any broken glass to avoid injury. If the projector is installed on the ceiling, stand to the side

of the lamp cover and not underneath it; pieces of glass could fall into your eyes or mouth when you

open the lamp cover.

4. Slide the lamp cover out and lift it off.

157

5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out.

6. Grasp the raised section of the lamp and gently pull the lamp out of the projector.

Note:

The lamp(s) in this product contain mercury. Please consult your state and local

regulations regarding disposal or recycling. Do not put in the trash.

158

7. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right

way.

Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure.

8. Push in the lamp firmly and tighten the screws to secure it.

Caution: Do not over-tighten the screws.

159

9. Replace the lamp cover and tighten the screw to secure it.

Note: Be sure the lamp cover is securely installed or the lamp will not come on.

Reset the lamp timer to zero to keep track of the new lamp's usage.

Parent topic: Projector Lamp Maintenance

Related references

Related tasks

Resetting the Lamp Timer

You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement

message and to keep track of lamp usage correctly.

Note: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage

information.

1. Turn on the projector.

2. Press the Menu button.

160

3. Select the Reset menu and press Enter.

4. Select Reset Lamp Hours and press Enter.

You see a prompt asking if you want to reset the lamp hours.

5. Select Yes and press Enter.

6. Press Menu or Esc to exit the menus.

Parent topic: Projector Lamp Maintenance

Related tasks

Replacing the Lamp

Replacing the Remote Control Batteries

The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they

run out.

Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,

or mix new and old batteries.

161

1. Remove the battery cover as shown.

2. Remove the old batteries.

Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on

your hands. If it gets on your hands, wash them immediately to avoid injury.

3. Insert the batteries with the + and – ends facing as shown.

Warning: Make sure the batteries are inserted in the correct positions. If the batteries are not

inserted correctly, they could explode or leak, causing a fire, injury, or damage to the product.

162

4. Replace the battery cover and press it down until it clicks into place.

Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat

or flame. Keep batteries out of the reach of children; they are choking hazards and are very

dangerous if swallowed.

Parent topic: Projector Maintenance

Transporting the Projector

The projector contains precision parts, some of which are glass. Follow these guidelines to transport,

ship, or store the projector safely:

• Make sure the projector is turned off, the power indicator is blue (but not flashing), and the status

indicator is off, then unplug the power cord.

• Close the lens cover to protect the lens.

• Remove any equipment connected to the projector.

• Use a carrying case to hand-carry the projector.

• When transporting the projector a long distance or as checked luggage, place it in a carrying case.

Then pack the case in a firm box with cushioning around it and mark the box "Fragile."

• When shipping the projector for repairs, place it in its original packing materials, if possible, or use

equivalent materials with cushioning around the projector. Mark the box "Fragile."

Note: Epson shall not be liable for any damages incurred during transportation.

Parent topic: Maintaining and Transporting the Projector

163

Solving Problems

Check the solutions in these sections if you have any problems using the projector.

Projection Problem Tips

Using the Projector Help Displays

Solving Image or Sound Problems

Solving Projector or Remote Control Operation Problems

Solutions When a Battery Message Appears

Solving Network Problems

Projection Problem Tips

If the projector is not working properly, try turning it off and unplugging it. Then plug it back in and turn it

on.

If this does not solve the problem, check the following:

• The lights on the projector may indicate what the problem is.

• The Help option on the Home screen can display information about common problems, if the projector

is operating.

• The solutions in this manual can help you solve many problems.

If none of these solutions help, you can contact Epson for technical support.

Parent topic: Solving Problems

Related references

Using the Projector Help Displays

Related tasks

164

Projector Light Status

The lights on the projector indicate the projector status and let you know when a problem occurs. Check

the status and color of the lights and look for a solution in the table here.

Power light

Status light

Wireless LAN light

Lamp light

Temp (temperature) light

Projector status

Power light

Blue

Status light

Blue

Lamp light

Temp light

Status and solution

Off

Normal operation

Blue

Flashing blue

Warming up or cooling down. All

buttons are disabled.

Blue

Off

Standby or sleep mode

Flashing blue

Preparing for network monitoring

165

Power light

Status light

Lamp light

Temp light

Status and solution

Flashing blue

Light status

varies

Light status

varies

Flashing

orange

Projector is too hot

• Make sure that the vents and air

filter are not clogged with dust or

obstructed by nearby objects

• Clean or replace the air filter

• Make sure the environmental

temperature is not too hot

Off

Flashing blue

Off

Orange

Projector has overheated and

turned off; leave it turned off to cool

down for about five minutes, then

do the following:

• Make sure that the vents and air

filter are not clogged with dust or

obstructed by nearby objects

• Clean or replace the air filter

• If operating the projector at high

altitude, turn on High Altitude

Mode

• If the problem persists, unplug

the projector and contact Epson

for help

166

Power light

Status light

Lamp light

Temp light

Status and solution

Off

Flashing blue

Orange

Off

Lamp or lamp cover has a problem

• Check to see if the lamp is

burned out, broken, or installed

incorrectly; reseat or replace the

lamp as necessary

• Clean or replace the air filter

• If operating the projector at high

altitude, turn on High Altitude

Mode

• If the problem persists, unplug

the projector and contact Epson

for help

• Check that the lamp cover is

installed correctly

Flashing blue

Light status

varies

Flashing

orange

Light status

varies

Replace the lamp soon to avoid

damage; do not continue using the

projector

Off

Flashing blue

Off

Flashing

orange

A fan or sensor has a problem; turn

the projector off, unplug it, and

contact Epson for help

Flashing

orange

Off

Internal projector error; turn the

projector off, unplug it, and contact

Epson for help

Flashing

orange

Flashing

orange

Auto iris error; turn the projector off,

unplug it, and contact Epson for

help

Orange

Power error; turn the projector off,

unplug it, and contact Epson for

help

167

Wireless LAN status

Wireless LAN light

Blue

Status and solution

Wireless LAN is available

Flashing blue quickly

Flashing blue slowly

Off

Connecting to a device

An error has occurred; turn off the projector, then turn it back on

Wireless LAN is not available; make sure the wireless LAN settings are

correct

Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and

contact Epson for help.

Parent topic: Solving Problems

Related concepts

Projector Lamp Maintenance

Air Filter and Vent Maintenance

Related references

Turning Off the Projector

Related tasks

Using the Projector Help Displays

You can display information to help you solve common problems using the projector's Help system.

1. Turn on the projector.

2. Press the Home button on the projector or the remote control.

3. Press the arrow buttons to select Help.

4. Press Enter.

You see the Help menu.

5. Press the up and down arrow buttons to highlight the problem you want to solve.

168

6. Press Enter to view the solutions.

7. When you are finished, do one of the following:

• To select another problem to solve, press Esc.

• To exit the help system, press Home.

Parent topic: Solving Problems

Solving Image or Sound Problems

Check the solutions in these sections if you have any problems with projected images or sound.

Solutions When No Image Appears

Solutions When Image is Incorrect Using the USB Display Function

Solutions When "No Signal" Message Appears

Solutions When "Not Supported" Message Appears

Solutions When Only a Partial Image Appears

Solutions When the Image is Not Rectangular

Solutions When the Image Contains Noise or Static

Solutions When the Image is Fuzzy or Blurry

Solutions When the Image Brightness or Colors are Incorrect

Solutions to Sound Problems

Parent topic: Solving Problems

Solutions When No Image Appears

If no image appears, try the following solutions:

• Make sure the lens cover is open all the way.

• Press the A/V Mute button on the remote control to see if the image was temporarily turned off.

• Make sure all necessary cables are securely connected and the power is on for the projector and

connected video sources.

• Press the projector's power button to wake it from standby or sleep mode. Also see if your connected

computer is in sleep mode or displaying a blank screen saver.

• Press the Menu button. If the projector menu displays, there may be a problem with the connected

video source, cable connection, or port.

• Check the settings on the Signal menu to make sure they are correct for the current video source.

169

• Adjust the Brightness setting or select the Normal Power Consumption setting.

• Check the Display setting to make sure Messages is set to On.

• If the projector does not respond when you press the control panel buttons, the buttons may be

locked. Unlock the buttons. Press and hold the Enter button on the control panel for 7 seconds.

• If the projector does not respond when you press buttons on the remote control, make sure the remote

receivers are turned on.

• For images projected with Windows Media Center, reduce the screen size from full screen mode.

• For images projected from applications using Windows DirectX, turn off DirectX functions.

• The projector may not be able to project copyrighted videos that you play back on a computer. For

details, see the manual supplied with your computer.

Related references

Projector Reset Options - Reset Menu

Related tasks

Unlocking the Projector's Buttons

Solutions When Image is Incorrect Using the USB Display Function

If no image appears or if the image appears incorrectly using the USB Display function, try the following

solutions:

• Press the USB button on the remote control.

• Make sure the USB Display software has installed correctly. Install it manually if necessary.

• On a Mac, select the USB Display icon in the Dock or from the Applications folder.

• For images projected with Windows Media Center, reduce the screen size from full screen mode.

• For images projected from applications using Windows DirectX, turn off DirectX functions.

• If the mouse cursor flickers, select Make the movement of the mouse pointer smooth in the Epson

USB Display Settings program on your computer.

• Turn off the Transfer layered window setting in the Epson USB Display Settings program on your

computer.

170

• If you are projecting using the 1080p video format and change the computer resolution during

projection, the video quality and performance may decline.

• Make sure you are using the most recent version of the USB Display software. You can download the

latest version from the Epson web site. Go to epson.com/support (U.S.), epson.ca/support (Canada),

or latin.epson.com/support (Caribbean) and select your projector.

Displaying From a PC Laptop

Solutions When "No Signal" Message Appears

If the "No Signal" message appears, try the following solutions:

• Press the Source Search button and wait a few seconds for an image to appear.

• Press the Home button on the remote control to select from a list of available sources.

• Turn on the connected computer or video source, and press its play button to begin your presentation,

if necessary.

• Check the connection from the projector to your video sources.

• If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.

• If necessary, turn the projector and the connected computer or video source off and then on again.

• If you are projecting from an HDMI source, replace the HDMI cable with a shorter one.

• Try a different video cable.

• If the other solutions do not solve the problem, reset all of the projector settings using the options on

the Reset menu.

Displaying From a Mac Laptop

Projector Reset Options - Reset Menu

Related references

Related tasks

Selecting an Image Source

171

Displaying From a PC Laptop

If you see the "No Signal" message when you display from a PC laptop, you need to set up the laptop to

display on an external monitor.

1. Hold down the laptop's Fn key and press the key labeled with a monitor icon or CRT/LCD. (See your

laptop manual for details.) Wait a few seconds for an image to appear. To display on both the

laptop's monitor and the projector, try pressing the same keys again.

Note: On Windows 7 or later, hold down the Windows key and press P at the same time, then click

Duplicate.

2. If the same image is not displayed by the laptop and projector, check the Windows Display utility to

make sure the external monitor port is enabled and extended desktop mode is disabled. (See your

computer or Windows manual for instructions.)

3. If necessary, check your video card settings and set the multiple display option to Clone, Mirror, or

Duplicate.

Parent topic: Solutions When "No Signal" Message Appears

Displaying From a Mac Laptop

If you see the "No Signal" message when you display from a Mac laptop, you need to set up the laptop

for mirrored display. (See your laptop manual for details.)

1. Open the System Preferences utility and select Displays, Display, or Color LCD.

2. Click the Arrange or Arrangement tab.

3. Select the Mirror Displays checkbox.

Parent topic: Solutions When "No Signal" Message Appears

Solutions When "Not Supported" Message Appears

If the "Not Supported" message appears, try the following solutions:

• Make sure the correct input signal is selected on the Signal menu.

• Make sure the computer's display resolution does not exceed the projector's resolution and frequency

limit. If necessary, select a different display resolution for your computer. (See your computer manual

for details.)

• As a test, try setting the computer's display resolution to the lowest possible setting, and then

gradually increase it as necessary.

172

Related references

Solutions When Only a Partial Image Appears

If only a partial computer image appears, try the following solutions:

• Press the Auto button on the remote control to optimize the image signal.

• Make sure the Resolution setting in the Signal menu is set correctly for the input signal.

• Try adjusting the image position using the Position menu setting.

• Press the Aspect button on the remote control to select a different image aspect ratio.

• If you zoomed into or out of the image using the E-Zoom buttons, press the Esc button until the

projector returns to a full display.

• Check the cables connecting the computer or video source to the projector. Try connecting different

cables.

• Check your computer display settings to disable dual display and set the resolution within the

projector's limits. (See your computer manual for details.)

• Check the resolution assigned to your presentation files to see if they are created for a different

resolution than you are projecting in. (See your software help for details.)

• Make sure you selected the correct Projection setting.

• If the other solutions do not solve the problem, reset all of the projector settings using the options on

the Reset menu.

Related references

Solutions When the Image is Not Rectangular

If the projected image is not evenly rectangular, try the following solutions:

• Turn on automatic keystone adjustments using the projector's menus.

• Place the projector directly in front of the center of the screen, facing it squarely, if possible.

• If you adjusted the projector height using the projector feet, press the keystone buttons on the

projector to adjust the image shape.

173

• Adjust the position of the projector's horizontal keystone slider.

• Adjust the Quick Corner setting to correct the image shape.

Related concepts

Image Shape

Related references

Solutions When the Image Contains Noise or Static

If the projected image seems to contain electronic interference (noise) or static, try the following

solutions:

• Check the cables connecting your computer or video source to the projector. They should be:

• Separated from the power cord to prevent interference

• Securely connected at both ends

• Not connected to an extension cable

• No longer than 9.8 feet (3 m) for VGA/computer cables or 24 feet (7.3 m) for HDMI cables

• If you adjusted the image shape, adjust the Sharpness setting in the Image menu.

• Check the settings on the projector's Signal menu to make sure they match the video source. If

available for your video source, adjust the Deinterlacing and Noise Reduction settings.

• If available for your video source, select Auto as the Resolution setting in the Signal menu.

• Select a computer video resolution and refresh rate that are compatible with the projector.

• If you are projecting from a computer, press the Auto button on the remote control to automatically

adjust the tracking and sync. If the problem remains, display a uniformly patterned image on the

screen and manually adjust the Tracking and Sync settings.

• If you connected an extension power cable, try projecting without it to see if it caused interference in

the signal.

• If you are using the USB Display function, turn off the Transfer layered window setting in the Epson

USB Display Settings program on your computer.

• Try a different cable.

174

Related references

Solutions When the Image is Fuzzy or Blurry

If the projected image is fuzzy or blurry, try the following solutions:

• Adjust the image focus.

• Clean the projector lens.

Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the

projector warm up to room temperature before using it.

• Position the projector close enough to the screen.

• Position the projector so the keystone adjustment angle is not so wide that it distorts the image.

• Turn on automatic keystone adjustment in the projector's menus.

• Adjust the Sharpness setting to improve image quality.

• If you are projecting from a computer, press the Auto button on the remote control to automatically

adjust the tracking and sync. If any bands or overall blurriness remain, display a uniformly patterned

image on the screen and manually adjust the Tracking and Sync settings.

• If you are projecting from a computer, try using a lower resolution or try to match the projector's native

resolution.

Related concepts

Projector Placement

Related references

General Projector Specifications

Related tasks

Focusing the Image Using the Focus Ring

Cleaning the Lens

175

Solutions When the Image Brightness or Colors are Incorrect

If the projected image is too dark or light, or the colors are incorrect, try the following solutions:

• Press the Color Mode button on the remote control to try different color modes for the image and

environment.

• Check your video source settings.

• Adjust the available settings on the Image menu for the current input source, such as Brightness,

Contrast, Tint, Color Temp., and/or Color Saturation.

• Make sure you selected the correct Video Range or Video Signal setting on the Signal menu, if

available for your image source.

• Make sure all the cables are securely connected to the projector and your video device. If you

connected long cables, try connecting shorter cables.

• If you are using the ECO Power Consumption setting, try selecting Normal in the projector's menus.

Note: At high altitudes or locations subject to high temperatures, the image may become darker and

you may not be able to adjust the Power Consumption setting.

• Position the projector close enough to the screen.

• If the image has been progressively darkening, you may need to replace the projector lamp soon.

• If the above solutions do not correct your image, try resetting all of the projector's settings using the

Reset menu.

Related concepts

Color Mode

Projector Placement

Related references

Solutions to Sound Problems

If there is no sound when you expect it or the volume is too low or high, try the following solutions:

• Adjust the projector's volume settings.

176

• Press the A/V Mute button on the remote control to resume video and audio if they were temporarily

stopped.

• Check your computer or video source to make sure the volume is turned up and the audio output is set

for the correct source.

• Try disconnecting and reconnecting the audio cable.

• Check the audio cable connections between the projector and your video source.

• If you do not hear sound from an HDMI source, set the connected device to PCM output.

• Make sure any connected audio cables are labeled "No Resistance."

• If you are using the USB Display function, turn on the Output audio from the projector setting in the

Epson USB Display Settings program on your computer.

• If you are using a Mac and you do not hear sound from an HDMI source, make sure your Mac

supports audio through the HDMI port. If not, you need to connect an audio cable.

• If the volume for the computer is set to the minimum while the projector's volume is set to maximum,

the sound level may be mixed. Turn up the computer's volume and decrease the projector's volume.

• Make sure the A/V Settings options are set up correctly in the Extended menu.

• If you hear a hissing sound from your projector's speakers when projecting from a computer running

Windows 10 over a network, you may need to adjust the Windows 10 sound properties:

1. Right-click the speaker icon in the Windows taskbar and select Sounds.

2. Click the Playback tab, select the playback device, and click Properties.

3. Click the Advanced tab, set the sample rate and bit depth setting to 16 bit, 44100 Hz (CD Quality),

click Apply, and click OK.

Note: These steps may vary depending on the Windows 10 version you are using.

• If you turn the projector on immediately after turning it off, the cooling fans may run at high speed

momentarily and cause an unexpected noise. This is normal.

Related references

Solutions to Projector Power or Shut-Off Problems

177

Solving Projector or Remote Control Operation Problems

Check the solutions in these sections if you have problems operating the projector or remote control.

Solutions to Remote Control Problems

Solutions to Password Problems

Parent topic: Solving Problems

Solutions to Projector Power or Shut-Off Problems

If the projector does not come on when you press the power button or it shuts off unexpectedly, try the

following solutions:

• Make sure the power cord is securely connected to the projector and to a working electrical outlet.

• If the projector's lamp shuts off unexpectedly, it may have entered standby mode after a period of

inactivity. Press the power button to wake the projector and adjust the Sleep Mode Timer setting to

change the sleep interval.

• Make sure the A/V Mute Timer setting and the Lens Cover Timer setting are turned off in the ECO

menu.

• If the power button on the remote control does not turn on the projector, check its batteries and make

sure the Remote Receiver setting is turned on in the projector's menu, if available.

• The power cord may be defective. Try another power cord. If that doesn't work, disconnect the cord

and contact Epson.

• Make sure the lamp and lamp cover are installed correctly.

Parent topic: Solving Projector or Remote Control Operation Problems

Related references

Unlocking the Projector's Buttons

Related tasks

178

Solutions to Remote Control Problems

If the projector does not respond to remote control commands, try the following solutions:

• Check that the remote control batteries are installed correctly and have power. If necessary, replace

the batteries.

• Make sure you are operating the remote control within the reception angle and range of the projector.

• Make sure the projector is not warming up or shutting down.

• Check to see if a button on the remote control is stuck down, causing it to enter sleep mode. Release

the button to wake the remote control up.

• Strong fluorescent lighting, direct sunlight, or infrared device signals may be interfering with the

projector's remote receivers. Dim the lights or move the projector away from the sun or interfering

equipment.

• If available, turn on one of the remote receivers in the projector's menu system, or check if all the

remote receivers were turned off.

• If you assigned an ID number to the remote control to operate multiple projectors, you may need to

check or change the ID setting (feature not available with all projectors).

• If you lose the remote control, you can purchase another from an authorized Epson reseller.

Parent topic: Solving Projector or Remote Control Operation Problems

Related references

Remote Control Operation

Replacing the Remote Control Batteries

Related tasks

Solutions to Password Problems

If you cannot enter or remember a password, try the following solutions:

• You may have turned on password protection without first setting a password. Try entering 0000 using

the remote control. If you lose the remote control, you cannot enter a password. Order a new one from

Epson.

• If you have entered an incorrect password too many times and see a message displaying a request

code, write down the code and contact Epson. Do not attempt to enter the password again. Provide

the request code and proof of ownership for assistance in unlocking the projector.

179

• If you set a Epson Web Control password and forgot the user ID or password, try entering the

following:

• User ID: EPSONWEB

• Default password: admin

• If you set a Remote password (in Epson Web Control) and forgot the user ID or password, try entering

the following:

• User ID: EPSONREMOTE

• Default password: guest

Parent topic: Solving Projector or Remote Control Operation Problems

Related concepts

Password Security Types

Solutions When a Battery Message Appears

If you see a message telling you that the battery that saves your clock settings is running low, contact

Epson for help.

Parent topic: Solving Problems

Solving Network Problems

Check the solutions in these sections if you have problems using the projector on a network.

Solutions When Wireless Authentication Fails

Solutions When You Cannot Access the Projector Through the Web

Solutions When Network Alert E-Mails are Not Received

Solutions When You Cannot Connect Using Screen Mirroring

Solutions When the Image Contains Static During Network Projection

Solutions When the Image or Sound Contains Static During Screen Mirroring

Parent topic: Solving Problems

Solutions When Wireless Authentication Fails

If you cannot authenticate a wireless connection, try the following solutions:

• If the wireless settings are correct, but authentication fails, you may need to update the Date & Time

settings in the Extended menu, if available.

• Make sure the Wireless LAN Power setting is set to On.

180

• Check the Security settings and passphrase in the Network Configuration menu.

• Check the Event ID number displayed in the Info menu and check the link below to identify the

problem.

• Make sure you are using the correct Epson wireless LAN module.

Parent topic: Solving Network Problems

Related references

Projector Network Settings - Network Menu

Event ID Code List

Solutions When You Cannot Access the Projector Through the Web

If you are unable to access the projector through a web browser, make sure you are using the correct ID

and password, which are case sensitive.

Note: You cannot change the user ID.

• You may need to log in to access some options on the Web Control screen. If you see a log in window,

enter EPSONWEB as the user ID and enter the password set in the projector's Network menu as the

password. The default password is admin.

• To display the Web Remote screen, enter EPSONREMOTE as the user ID and enter the password

set in the projector's Network menu as the password. The default password is guest.

• Avoid connecting via a proxy server.

• Make sure you have access to the network the projector is on.

Note: The user ID and password are case sensitive.

Parent topic: Solving Network Problems

Solutions When Network Alert E-Mails are Not Received

If you do not receive an e-mail alerting you to problems with a projector over the network, try the

following solutions:

• Make sure the projector is turned on and connected to the network correctly. (If an error shut down the

projector, it cannot send an e-mail.)

181

• Make sure you set up the projector e-mail alert settings correctly on the projector's network menu or in

the network software.

• Set the Standby Mode setting to Communication On so the network software can monitor the

projector in standby mode. Change the Port setting according to your network environment.

Parent topic: Solving Network Problems

Related references

Solutions When You Cannot Connect Using Screen Mirroring

If you are unable to connect to the projector using Screen Mirroring (Home Cinema 1080), try the

following solutions:

• Select On as the Screen Mirroring setting in the projector's Network menu.

• Make sure the Display Name in the screen mirroring settings does not include "-" or it may not display

correctly on your mobile device.

• Make sure the Operation Mode and Channel settings are correct for your mobile environment and try

connecting again.

• Make sure no other mobile device is connected to the projector using No Interruptions settings in the

Extended menu Meeting Mode settings.

• Make sure the mobile device settings are correct.

• You may not be able to connect immediately after disconnecting from the projector. Wait a while and

try connecting again.

• Restart the mobile device.

• If you have previously connected to the projector using Screen Mirroring, the device may have saved

the previous connection information. Delete the saved information and connect to the projector from

the list of available devices.

Parent topic: Solving Network Problems

Related references

General Projector Specifications

182

Solutions When the Image Contains Static During Network Projection

If the projected image contains static during network projection, try the following solutions:

• Check for any obstacles between the access point, the computer, the mobile device, and the projector.

If necessary, change their positions to improve communication. Also make sure that they are not too

far apart; move them closer together and try to connect again.

• If the wireless connection is slow or your projected image contains noise, check for interference from

other equipment, such as a Bluetooth device or microwave. Move the interfering device farther away

or expand your wireless bandwidth.

• If the connection speed declines, reduce the number of connected devices.

Parent topic: Solving Network Problems

Solutions When the Image or Sound Contains Static During Screen Mirroring

If the projected image or sound contains static during Screen Mirroring (Home Cinema 1080), try the

following solutions:

• Avoid covering the Wi-Fi antenna of the mobile device.

• If you use a Screen Mirroring connection and an internet connection at the same time, the image may

stop or contain noise. Disconnect the internet connection to expand your wireless bandwidth and

improve the connection speed of the mobile device.

• Make sure the projection contents meet the Screen Mirroring requirements.

• Depending on the settings of the mobile device, the connection may be lost when the device enters

power saving mode. Check the electrical power saving settings on the mobile device.

• Update to the latest version of the wireless driver or firmware on the mobile device.

Parent topic: Solving Network Problems

Where to Get Help (U.S. and Canada)

If you need to contact Epson for technical support services, use the following support options.

Internet Support

Visit Epson's support website at epson.com/support (U.S.), epson.ca/support (Canada), or

latin.epson.com/support (Caribbean) and select your product for solutions to common problems with

your projector. You can download utilities and documentation, get FAQs and troubleshooting advice, or

e-mail Epson with your questions.

183

Speak to a Support Representative

To use the Epson PrivateLine Support service, call (800) 637-7661. This service is available for the

duration of your warranty period. You may also speak with a projector support specialist by dialing (562)

276-4394 (U.S.) or (905) 709-3839 (Canada).

Support hours are 6 AM to 8 PM, Pacific Time, Monday through Friday and 7 AM to 4 PM, Pacific Time,

Saturday.

Days and hours of support are subject to change without notice. Toll or long distance charges may

apply.

Before you call, have the following information ready:

• Product name

• Product serial number (located on the bottom or rear of the projector, or in the menu system)

• Proof of purchase (such as a store receipt) and date of purchase

• Computer or video configuration

• Description of the problem

Purchase Supplies and Accessories

You can purchase screens, other optional accessories, and replacement parts from an Epson authorized

reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766) in the U.S. or 800-807-7766 in

Canada. Or you can purchase online at epsonstore.com (U.S. sales) or epsonstore.ca (Canadian sales).

To purchase a replacement remote control, call (562) 276-4394 (U.S.) or (905) 709-3839 (for dealer

referral in Canada).

Parent topic: Solving Problems

Where to Get Help (Latin America)

If you need to contact Epson for technical support services, use the following support options.

Internet Support

Visit Epson's support website at latin.epson.com/support and select your product for solutions to

common problems. You can download utilities and documentation, get FAQs and troubleshooting

advice, or e-mail Epson with your questions.

184

Speak to a Support Representative

Before you call for support, please have the following information ready:

• Product name

• Product serial number (located on the bottom or rear of the projector, or in menu system)

• Proof of purchase (such as a store receipt) and date of purchase

• Computer or video configuration

• Description of the problem

Then call:

Country

Telephone

Argentina

(54 11) 5167-0300

0800-288-37766

Bolivia*

Brazil

800-100-116

0800-007-5000

Chile

(56 2) 2484-3400

Bogota: (57 1) 592-2200

Other cities: 018000-915235

800-377-6627

Colombia

Costa Rica

Dominican Republic*

Ecuador*

1-888-760-0068

1-800-000-044

El Salvador*

Guatemala*

Mexico

800-6570

1-800-835-0358

Mexico City: (52 55) 1323-2052

Other cities: 01-800-087-1080

00-1-800-226-0368

00-800-052-1376

009-800-521-0019

Nicaragua*

Panama*

Paraguay

185

Country

Telephone

Peru

Lima: (51 1) 418-0210

Other cities: 0800-10-126

00040-5210067

Uruguay

Venezuela

(58 212) 240-1111

* Contact your local phone company to call this toll-free number from a mobile phone.

Note: Toll or long distance charges may apply. If your country does not appear on the list, contact the

sales office in the nearest country.

Purchase Supplies and Accessories

You can purchase optional accessories and replacement parts from an Epson authorized reseller. To

find the nearest reseller, go to epson.com.jm. Or you can contact your nearest sales office as described

in "Where to Get Help".

Parent topic: Solving Problems

186

Technical Specifications

These sections list the technical specifications of your projector.

Projector Lamp Specifications

Remote Control Specifications

Projector Dimension Specifications

Projector Electrical Specifications

Projector Environmental Specifications

Projector Safety and Approvals Specifications (U.S. and Canada)