EPSON 1060 User Manual

Home Cinema 660/760HD/1060  
Connect audio  
Built-in speaker  
The projector has a built-in speaker that can play audio from a video source  
(DVD player, streaming device, etc.) connected by an HDMI cable. If you do not  
use an HDMI connection, you must connect your device’s audio output to the  
projector’s audio input.  
Quick Setup  
Before using the projector, make sure you read the safety instructions in the  
online User’s Guide.  
Note: Your product may differ from the illustrations on this sheet, but the  
instructions are the same.  
Home Cinema 660/760HD  
Connect the projector  
HDMI cable  
Choose from the following connections. See the sections below or the online  
User’s Guide for details.  
RCA audio cable  
Video device  
Connect multiple video devices and use the Source Search button on the  
projector or the remote control to switch between them.  
Home Cinema 1060  
Home Cinema 660/760HD  
HDMI cable  
Component video  
to VGA cable  
RCA audio cable  
External speakers  
HDMI cable  
Connect your device’s audio output to your home theater receiver or powered  
speakers.  
RCA video cable  
(composite video)  
Note: The internal speaker is disabled when an external device is connected.  
If you are using an HDMI connection to the projector, you may need to reduce  
the projector speaker volume to zero (0), or make sure that the correct audio  
output is selected on your device.  
Home Cinema 1060  
HDMI cable  
Home theater system  
Component video  
to VGA cable  
Video source  
RCA video cable  
(composite video)  
Mobile media device (Home Cinema 1060)  
Connect tablets, smartphones, and other devices that support the MHL  
Video cable  
standard to the HDMI2/MHL port.  
Surround sound  
Receiver  
Projector  
Powered speakers  
MHL cable  
Streaming device  
Video cable  
Some devices may require an adapter or may not require an MHL cable. Not all  
features or functions may be supported. Check your device’s documentation for  
more information.  
External speakers  
Video source  
Projector  
Note: See your home theater receiver documentation for more information  
on connections.  
Computer  
Connect one end of an HDMI cable to one of the projector’s HDMI ports shown  
above and the other end to an HDMI port on your computer.  
Turn on your equipment  
Turn on your video source or computer.  
1
Note: For more information on connecting the projector to your computer or  
other devices (camera, USB flash drive, etc.), see the online User’s Guide.  
Plug in the projector. The  
power light on the projector turns blue.  
2
Open the A/V Mute slide all the way.  
To sharpen the image, turn the focus ring.  
3
4
4
5
Home Cinema 660  
Home Cinema  
760HD/1060  
If your image looks like  
or  
, you may have placed the projector  
Press the  
power button on the projector or remote control. The  
off to one side of the screen at an angle. Place the projector directly in  
front of the center of the screen, facing the screen squarely. If you can’t  
move the projector, use the horizontal keystone slider on the projector  
to correct the image shape.  
projector beeps, the Status light flashes blue, and then stays on.  
Home Cinema 660  
Home Cinema  
760HD/1060  
Your projector automatically adjusts images that look like  
or  
,
Note: To shut down the projector, press the  
power button twice.  
6
but if necessary you can press the  
correct it.  
or  
button on the projector to  
Use the arrow buttons on the remote control to highlight any options on  
the Home screen that appears, then press to select it. You can switch  
5
between projection sources and quickly access various adjustment options  
from this screen.  
Using the remote control  
Install the batteries as shown (two AA batteries).  
The default language of the menu system is English. To select another  
language, press the Menu button on the projector or the remote  
6
Turn projector  
on and off  
Choose which source  
to display  
control. Select Extended and press  
Select your language and press  
menu system.  
. Select Language and press  
. Press the Menu button to exit the  
.
Adjust the image  
If you don’t see an image, press the Source Search button on the  
projector or the remote control to select the image source.  
1
Note: If you still see a blank screen or have other display problems, see  
the tips in “Troubleshooting” on the back of this sheet.  
Access projector  
menus  
Navigate projector  
menus  
To raise the image, press the foot release button and lift the front of the  
projector. Release the button to lock the foot in position.  
2
Turn off projector  
display  
Access the Home  
screen  
Home Cinema 660: To reduce or enlarge the image, press the T (reduce)  
or W (enlarge) button on the projector.  
3
For more information on using the remote control, see the online  
User’s Guide.  
Home Cinema 760HD/1060: To reduce or enlarge the image, turn the  
zoom ring.  
Home Cinema 660  
Home Cinema  
760HD/1060  
Troubleshooting  
Notices  
Declaration of Conformity  
According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or  
CPU Boards and Power Supplies used with Class B Personal Computers.  
If you see a blank screen or the No signal message after turning on your  
computer or video device, check the following:  
Make sure the Status light on the projector is blue and not flashing,  
and the A/V Mute slide is open.  
We:  
Located at:  
Telephone:  
Epson America, Inc.  
3840 Kilroy Airport Way, MS: 3-13, Long Beach, CA 90806  
(562) 981-3840  
Press the Source Search button on the projector or remote control to  
switch to the correct image source, if necessary.  
Declare under sole responsibility that the product identified herein, complies with  
47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed,  
is identical to the representative unit tested and found to be compliant with the  
standards. Records maintained continue to reflect the equipment being produced can  
be expected to be within the variation accepted, due to quantity production and testing  
on a statistical basis as required by 47CFR 2.909. Operation is subject to the following  
two conditions: (1) this device may not cause harmful interference, and (2) this device  
must accept any interference received, including interference that may cause undesired  
operation.  
Press the Home button on the projector or remote control to verify the  
source input and settings.  
On Windows® 7 or later, hold down the Windows key and press P at the  
same time, then click Duplicate.  
If you’re using a Windows laptop, press the function key on your  
keyboard that lets you display on an external monitor. It may be labeled  
Trade Name:  
Type of Product:  
Model:  
Epson  
LCD Projector  
H847A/H848A/H849A  
Home Cinema 660/760HD/1060  
CRT/LCD or have an icon such as  
. You may have to hold down the  
Marketing Name:  
Fn key while pressing it (such as Fn + F7). Wait a moment for the display  
to appear.  
Wireless LAN Safety and Specifications  
If you’re using a Mac laptop, open System Preferences and select  
Displays. Click the Arrangement tab and select the Mirror Displays  
checkbox.  
Contains wireless LAN module model: WN7122BEP (Home Cinema 1060)  
This document provides safety instructions and describes the specifications. Read this  
document carefully before use to ensure your safety and product performance.  
Data transmission is always initiated by software, which is the passed down through  
the MAC, through the digital and analog baseband, and finally to the RF chip. Several  
special packets are initiated by the MAC. These are the only ways the digital baseband  
portion will turn on the RF transmitter, which it then turns off at the end of the packet.  
Therefore, the transmitter will be on only while one of the aforementioned packets is  
being transmitted. In other words, this device automatically discontinue transmission in  
case of either absence of information to transmit or operational failure.  
Where to get help  
Manual  
For more information about using the projector, click the icon on your desktop  
to access the online manual (requires an Internet connection). If you don’t have  
a User’s Guide icon, you can install it from the projector CD or go to the Epson  
website, as described below.  
This equipment is restricted to indoor operation only.  
U.S. FCC Notices  
Contains FCC ID: BKMAE-7122  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following  
two conditions: (1) This device may not cause harmful interference, and (2) this device  
must accept any interference received, including interference that may cause undesired  
operation.  
Telephone support services  
To use the Epson® PrivateLine® Support service, call (800) 637-7661. This service  
is available for the duration of your warranty period. You may also speak with  
a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).  
This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in  
a particular installation. If this equipment does cause harmful interference to radio  
or television reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one of the following  
measures:  
Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and  
7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to  
change without notice. Toll or long distance charges may apply.  
Internet support  
(Canada) for solutions to common problems. You can download utilities and  
documentation, get FAQs and troubleshooting advice, or e-mail Epson.  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
Registration  
Register today to get product updates and exclusive offers. You can use the CD  
• Consult the dealer or an experienced radio/TV technician for help.  
included with your projector or register online at www.epson.com/webreg.  
Caution: Changes or modifications not expressly approved by the party responsible for  
compliance could void the user’s authority to operate this equipment. Properly shielded  
and grounded cables and connectors must be used for connection to host computers and  
/ or peripherals in order to meet FCC emission limits.  
Optional accessories  
This transmitter must not be co-located or operating in conjunction with any other  
antenna or transmitter.  
For a list of optional accessories, see the online User’s Guide.  
This equipment complies with FCC radiation exposure limits set forth for an  
uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines.  
This equipment should be installed and operated keeping the radiator at least 7.8 inches  
(20 cm) or more away from person’s body.  
You can purchase screens or other accessories from an Epson authorized  
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).  
Or you can purchase online at www.epsonstore.com (U.S. sales) or  
www.epsonstore.ca (Canadian sales).  
Industry Canada (IC) Notices  
Contains IC: 1052D-7122  
CAN ICES-3 (B)/NMB-3 (B)  
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject  
to the following two conditions: (1) This device may not cause interference; and (2) This  
device must accept any interference, including interference that may cause undesired  
operation of the device.  
This equipment complies with IC radiation exposure limits set forth for an uncontrolled  
environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This  
equipment should be installed and operated keeping the radiator at least 7.8 inches  
(20 cm) or more away from person’s body.  
Epson America, Inc. Limited Warranty  
Two-Year Projector Limited Warranty and 90-Day Lamp Limited Warranty  
What Is Covered: Epson America, Inc. (“Epson”) warrants to the original retail purchaser  
of the Epson projector product enclosed with this limited warranty statement that the  
product, if purchased new and operated in the United States, Canada, or Puerto Rico will  
be free from defects in workmanship and materials for a period of two years from the  
date of original purchase. This limited warranty applies only to the projector and not to  
the projector lamp, which carries a limited warranty period of ninety days from the date  
of original purchase. For warranty service, you may be required to provide proof of the  
date of original purchase.  
What Epson Will Do To Correct Problems: If your product requires service during the  
limited warranty period, please call Epson at the number on the bottom of this statement  
and be prepared to provide the model, serial number, and, if required, date of original  
purchase. If Epson confirms that warranty service is required, Epson will, at its option,  
repair or replace the defective unit, without charge for parts or labor. If Epson authorizes  
an exchange for the defective unit, Epson will ship a replacement product to you, freight  
prepaid, so long as you use an address in the United States, Canada, or Puerto Rico. You  
are responsible for securely packaging the defective unit and returning it to Epson within  
five working days of receipt of the replacement. Epson requires a debit or a credit card  
number to secure the cost of the replacement product in the event that you fail to return  
the defective one. If Epson authorizes repair instead of exchange, Epson will direct you  
to send your product to Epson or its authorized service center, where the product will  
be repaired and sent back to you. You are responsible for packing the product and for  
all postage or shipping costs to and from the Epson authorized service center. When  
warranty service involves the exchange of the product or of a part, the item replaced  
becomes Epson property. The exchanged product or part may be new or refurbished  
to the Epson standard of quality. If service cannot be provided on the product for any  
reason and Epson no longer sells the same model, Epson will replace your product with a  
model of equal or superior value. Replacement products or parts assume the remaining  
warranty period of the original product. If Epson replaces the lamp as part of the  
warranty service, the replacement lamp carries the limited 90-day warranty stated above.  
What This Warranty Does Not Cover: This warranty covers only normal use in the United  
States, Canada, or Puerto Rico.  
This warranty does not cover the following:  
• Excessive continual use  
• Consumables such as filters  
• Installation or removal  
• Cosmetic damage caused by handling or normal wear and tear during usage  
• Damage caused by failure to properly maintain the projector (see your online User’s  
Guide for details)  
• Damage caused by interaction with non-Epson products, such as add-in cards or cables  
• Any problem resulting from misuse, abuse, improper installation, neglect, improper  
shipping, disasters such as fire, flood, and lightning, improper electrical current,  
software problems, exposure to chemical smoke, or excessive humidity  
• Any problem resulting from service by other than Epson or an Epson Authorized  
Servicer  
Epson is not responsible for warranty service should the Epson label or logo or the  
rating label or serial number be removed. This warranty is not transferrable. Epson is  
not responsible for your data or applications, which cannot be restored and should be  
backed up by you. Postage, insurance, or shipping costs incurred in presenting your Epson  
product for carry-in warranty service are your responsibility. If a claimed defect cannot be  
identified or reproduced in service, you will be held responsible for costs incurred.  
DISCLAIMER OF OTHER WARRANTIES: THE WARRANTY AND REMEDY PROVIDED  
ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,  
NONINFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. SOME LAWS DO NOT  
ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN  
ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD  
IDENTIFIED ABOVE. UNLESS STATED HEREIN, ANY STATEMENTS OR REPRESENTATIONS  
MADE BY ANY OTHER PERSON OR FIRM ARE VOID.  
EXCLUSION OF DAMAGES; EPSON’S MAXIMUM LIABILITY: IN NO EVENT SHALL EPSON OR  
ITS AFFILIATES BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES  
OR ANY LOST PROFITS RESULTING FROM THE USE OR INABILITY TO USE THE EPSON  
PRODUCT, WHETHER RESULTING FROM BREACH OF WARRANTY OR ANY OTHER LEGAL  
THEORY. IN NO EVENT SHALL EPSON OR ITS AFFILIATES BE LIABLE FOR DAMAGES OF ANY  
KIND IN EXCESS OF THE ORIGINAL RETAIL PURCHASE PRICE OF THE PRODUCT.  
Arbitration, Governing Laws: Any dispute, claim or controversy arising out of or relating  
to this warranty shall be determined by arbitration in Los Angeles County, California  
before a single arbitrator. The arbitration shall be administered by JAMS pursuant to  
its Comprehensive Arbitration Rules and Procedures. Judgment on the award may be  
entered in any court having jurisdiction. Any action must be brought within three months  
of the expiration of the warranty. This clause shall not preclude parties from seeking  
provisional remedies in aid of arbitration from a court of appropriate jurisdiction. This  
warranty shall be construed in accordance with the laws of the State of California,  
except this arbitration clause which shall be construed in accordance with the Federal  
Arbitration Act.  
Other Rights You May Have: This warranty gives you specific legal rights, and you may  
also have other rights which vary from jurisdiction to jurisdiction. Some jurisdictions do  
not allow limitations on how long an implied warranty lasts, or allow the exclusion or  
limitation of incidental or consequential damages, so the above limitations or exclusions  
may not apply to you.  
In Canada, warranties include both warranties and conditions.  
EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko  
Epson Corporation. PrivateLine is a registered trademark and Epson Connection is a service mark of  
Epson America, Inc.  
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.  
To find the Epson Customer Care Center nearest you, please visit  
General Notice: Other product names used herein are for identification purposes only and may be trademarks  
of their respective owners. Epson disclaims any and all rights in those marks.  
SM, please call (800) 637-7661 or (562) 276-4394 in  
To contact the Epson Connection  
the U.S. and (905) 709-3839 in Canada or write to Epson America, Inc., P.O. Box 93012,  
Long Beach, CA 90809-3012.  
This information is subject to change without notice.  
© 2017 Epson America, Inc., 4/17  
Printed in XXXXXX  
CPD-53626  

Snapper 098900 User Manual
Sharp All In One Printer Mx B400p User Manual
Schumacher Mc 1 1 Amp User Manual
Ricoh Aficio 3235c User Manual
MAKITA UC3030A User Manual
LG LAC3715R User Manual
FUJITSU MHA2021AT User Manual
CRAFTSMAN 315.11690 User Manual
CRAFTSMAN 172.10856 User Manual
BLU LSEAT 003 User Manual