2
Set pressure controls
XCM25D Quick Start Guide
A
B
Manual Defrost
Up
Restart
Down
Press
menu. If
and
to exit the
and are
held, the control will exit
Use the or
to find the menu, then
press to select.
buttons
program mode. Use and
to return to program mode.
Power Indicator
Set/Select
Alarm Info
Pressure Parameters
Par. Description Value Range
Navigation
C
Enter program mode*
3 seconds ( flash)
+
Cut In
10-135 (psi)
0-30 (psi)
Cycle through options/adjust values
Select funtion/store function
Cut Out
Refrigerant 22, 134, 404,
(4)07A, (4)07C,
507 (may vary
Use
and
Exit program mode
+
buttons to select and
adjust pressure parameters.
*Program mode will terminate after 60 seconds of inactivity.
by model)
3 Set defrost parameters
1
Set the clock
and schedule
A
B
A
B
The unit will flash the first
time power is applied or if the
clock has lost its setting.
Press and hold
until flashes.
+
From the menu, use
and buttons to select
Press and hold
to exit program mode.
and
and adjust defrost parameters.
D
C
Defrost Parameters
Par.
Description
Interval
between defrost
Max duration
Value Range
(hours)
Use
and
Press
menu .
to select the
buttons to select and
adjust clock parameters.
(minutes)
(off), (interval),
(clock)
Defrost mode
Clock Parameters
Par. Description Value Range
1st start time
2nd start time
3rd start time
4th start time
5th start time
6th start time
Minute
Hour
Day
(not used),:
Month
Year
2015ECT-3 (3/15) Emerson is a trademark of Emerson Electric Co. ©2015 Emerson Climate Technologies, Inc. All rights reserved.
|