* Les marquages sont inscrits en bas de l'appareil. Les précautions d'emploi sont inscrites en bas de
l'appareil.
not remove any labels or stickers from the back or bottom of the cabinet.
Note the serial number on the bottom of your radio and write this number in the
space provided on the Warranty page of this manual.
•
•
La prise du secteur ne doit pas ētre obstruée ou doit ētre facilement accessible pendant son utilisation.
Pour étre complètement déconnecté de l'alimentation d'entrée, la prise doit ētre débranchée du secteur.
Les piles ne doivent pas ētre exposées à de forte chaleur, tel qu'á la lumière du soleil, au feu ou autres
choses de semblable.
Hold the TIME ZONE button and then press either the SET + (up) or – (down)
buttons until your own time zone appears on the display, then release the buttons.
The clock display will change to the correct time in the time zone you selected.
The clock will always return to the correct time in the zone you selected after every
power interruption.
Place your radio on a level surface such as a table, desk or shelf, convenient
to an AC outlet, out of direct sunlight, and away from sources of excess heat,
La prise du secteur est utilisé pour déconnecter le système.
dirt, dust, moisture, humidity, or vibration.
La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son utilisation.
Pour être complètement déconnecté de l’alimentation d’entrée, la prise doit être débranchée du secteur.
L’adaptateur AC/AC de l’appareil est utilisé pour déconnecter le système.
L’adaptateur AC/AC de l’appareil ne doit pas être obstrué ou doit être facilement accessible pendant
son utilisation.
•
Unwind the Line cord connecting the AC adapter and extend it to its full length.
The FM antenna is built in to this cord. It must be fully extended to provide the
best FM reception.
If you move to a different time zone, simply change the default zone display to the
new zone and the SmartSet® will remember that setting for you.
Pour être complètement déconnecté de l’alimentation d’entrée, l’adaptateur AC/AC de l’appareil doit
être déconnecté du secteur.
·minimum distances 10 cm around the apparatus for sufficient ventilations.
10cm de distance minimale autour de l’appareil pour une ventilation suffisante.
·the ventilation should not be impeded by covering the ventilation openings with items such as newspaper,
table-cloths, curtains etc.
Ne pas recouvrir les entrées d’aérations avec des objets tel qu’un journal, une nappe, un rideau, etc…
·no naked flame sources such as lighted candles should be placed on the apparatus.
Aucune source de flamme nue, tel qu’une bougie, ne doit être placée sur l’appareil.
·attention should be drawn to the environmental aspects of battery disposal.
Les piles usages doivent être jetées en respectantl’environnement.
·the use of apparatus in tropical and/or moderate climates.
L’utilisation de l’appareil dans un climat tropical et/ou modéré
Protect Your Furniture
Date Display
This model is equipped with non-skid rubber 'feet' to prevent the product from
moving when you operate the controls. These 'feet' are made from non-migrating
rubber material specially formulated to avoid leaving any marks or stains on your
furniture. However certain types of oil based furniture polishes, wood preservatives,
or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a
rubber residue on the furniture. To prevent any damage to your furniture we strongly
recommend that you purchase small self-adhesive felt pads, available at hardware
stores and home improvement centers everywhere, and apply these pads to the
bottom of the rubber 'feet' before you place the product on fine wooden furniture.
To see the correct date at any time, depress the MONTH/DATE button. The display
Changes from time to Month and Date (MM/DD).
For example, May 21st will appear as “ 5.21” .
When you release the MONTH/DATE button
the display returns to the correct time.
®
SmartSet Clock Radio
Year Display
With Auto-Time Setting System,
Dual Clock Alarm,
To see the correct year, depress the MONTH/DATE and TIME buttons together.
The display changes from time to year.
When you release the MONTH/DATE and
TIME buttons the display returns to the
correct time.
Power Source
This radio is designed to operate on normal 120V 60Hz AC power only. Do not
attempt to operate the radio on any other power source. You could cause damage
to the radio that is not covered by your warranty.
This radio should be connected to an AC outlet that
PLL AM/FM Radio
4 -Level Dimmer
(U.S. Patent No. 6,567,344)
'Day of Week' Display
is always 'live'. Do not connect it to an outlet that is
WARNING
controlled by a wall switch. When the power to the
radio is interrupted, the built in lithium battery takes
over to maintain the time and alarm settings. To
maximize the life of the lithium battery keep the radio
connected to a 'live' AC outlet at all times.
3123331
If the radio or buzzer is 'Off ', to view the correct 'Day of Week', depress the
WEEK button. The display will change from Time to “Day of Week”. When
you release the WEEK button the display returns to the correct Time.
If the radio or buzzer is 'On', to view the correct 'Day of Week', press the
RADIO ON/OFF Button first to stop the radio or buzzer,
Do not ingest the battery,Chemical Burn Hazard
This product contains a coin/button cell battery.
If the coin/button is swallowed,it can cause severe internal burns
in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely,stop using the
product and keep it away from children.
If you think batteries might have been swallowed or placed inside
any part of the body,seek immediate medical attention.
then depress the WEEK button, display will change
LOCATION OF CONTROLS AND INDICATORS
Front Panel
from Time to 'Day of Week'. When you release the
WEEK button the display returns to the correct Time.
Note: From d1,d2 to d7 stand for from Monday ,Tuesday to Sunday separately.
2
1
6
5
3
7
Daylight Saving and Leap Year Adjustments
All Daylight Saving and Leap Year adjustments are made automatically by
the SmartSet® internal computer as follows:
• Start of Daylight Saving Time:
At "2:00 AM" on the 2nd Sunday in March, the clock will automatically
advance to "3:00 AM".
21
Top Panel
8
OWNER'S MANUAL
13
• End of Daylight Saving Time:
At '3:00 AM' on the 1st Sunday in November, the clock will automatically
reset to "2:00 AM".
• Leap Year:
At "12:00 Midnight" on February 28th, the calendar display will change
to "2.29".
CKS1900
10
18
9
14
19
15
12
17
11
16
4
20
2
6
4
®
Thank you for purchasing this Emerson SmartSet Dual Alarm Clock Radio.
This clock radio uses Emerson's patented SmartSet Automatic Time Setting System.
®
1.)
2.)
(Alarm 1 'Buzzer') Indicator.
(Alarm 1 'Radio') Indicator.
13.) Speaker (Top Cabinet).
1
1
Manual Time Adjustments
WARNING
14.) ALARM 1 Setting / VOLUME + Button.
15.) ALARM 2 Setting / VOLUME - Button.
16.) WEEK/ALARM MODE Button (Week-
day/ Weekends / Everyday Alarm).
17.) SET - / TUNE - Button.
The first time you connect this clock radio to your AC outlet, and after every power
interruption, within seconds the clock will automatically set itself to the correct Year,
Month, Date, Day, and Time. In addition all changes from Standard Time to Daylight
Saving Time, and back to Standard Time, are made automatically.
There are dual alarms that can be set and used independently, and both of the alarms
can be programmed for everyday operation, weekdays only, or weekends only.
There is a long life lithium battery installed in this clock radio when you buy it.
This battery can maintain the time and alarm settings for 3 to 5 years, or even longer.
We have taken every precaution to make sure this radio was in perfect working order
when it left our factory. If you encounter any problems with the set up or operation of this
item, please call the Emerson Consumer Products Corp.,
Some people like to set their clocks 5 to 10 minutes fast to make sure that they will
always be on time. Even though the SmartSet®sets the time by itself, you still have
the option of adjusting the time manually if you wish.
To manually adjust the time display depress and hold the TIME button, and press
either the SET + or - buttons to adjust the time display ahead or back as desired.
Each press of the SET + or - buttons will change the display by one minute. If you
hold the SET + or - buttons the display will continue to change. The display will
change slowly at first, one minute at a time. But if you continue holding the SET +or
- buttons the display will change rapidly.
3.) AM Indicator.
4.) Time/Date Display.
5.)
6.)
7.)
8.) AC adapter (Back Cabinet).
9.) MONTH/DATE Setting / STORE
Station Button.
AVERTISSEMENT: AFIN DE PRÉVENIR TOUT RISQUE D’INCENDIE
OU D’ÉLECTROCUTION N’EXPOSEZ PAS CET APPAREIL
(Alarm 2 'Buzzer') Indicator.
(Alarm 2 'Radio') Indicator.
LOW BATT. Indicator.
2
2
Á LA PLUIE NI À L’HUMIDITÉ.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
18.) SET + / TUNE + Button.
19.)
RADIO ON/OFF Button.
20.) SNOOZE / SLEEP OFF / DIMMER
Button.
10.) TIME Setting / BAND Select Button.
21.) Back Up Battery Compartment
(Bottom Cabinet).
NOTE: If you manually adjust the time, your new setting is entered into the
SmartSet ® memory. If the power is interrupted, the display will return to your
new setting, not the original setting, when the power is restored.
11.) TIME ZONE / MEMORY Button.
Customer Service Hotline, toll free, at 1 -800-898-9020.
12.) SLEEP Button (Sleep To Music Timer).
IMPORTANT NOTES
Note: For buttons displayed with additional INVERSED font or icons,
they have multiple function at different operation mode. Generally, the
functions displayed in INVERSED font are for operation when Radio is ON.
The lightning flash with arrow-
head symbol, within an equi-
lateral triangle is intended to
alert the user to the presence
of uninsulated 'dangerous voltage'
within the product's enclosure
t h a t m a y b e o f s u f f i c i e n t
magnitude to constitute a risk
of electric shock to persons.
The exclamation point within
an equilateral triangle is in-
tend e d to ale rt th e u se r to
the pre se n ce of i mp o rtant
operating and maintenance
(se rvi ci n g ) instructio n s i n
the lite ra ture a ccompan y-
i n g t h e a p p l i a n c e .
Adjusting The Wake Up Times
• Operate controls and switches as
described in the manual.
• Before turning on the power, make
c e r t a i n t h a t t h e A C a d a p t e r i s
properly installed.
• When moving the set, be sure to first
disconnect the AC adapter.
• Avoid installing this unit in places
exposed to direct sunlight or close to
heat radiating appliances such as
electric heaters, on top of other stereo
equipment that radiates too much
heat, places lacking ventilation or dusty
areas, places subject to constant
vibration and/or humid or moist areas.
Your SmartSet® clock radio has two separate alarms that can be set and used
independently. You may use the alarms to wake two people at different times, or
you may use one alarm for weekdays and the other for weekend wake up times.
The procedure for adjusting the wake up time is the same for both Alarm 1 and
Alarm 2.
WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOOK DO NOT REMOVE
COVER (OR BACK),NO USER SERVICEABLE
PARTS INSIDE REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
AVIS:RISQUE DE CHOC
OPERATING INSTRUCTIONS
ELECTRIQUE- NE PAS OUVRIR
This is CLASS II apparatus with double insulation, and no protective earth provided.
Setting The Time, The First Time
1.) Depress and hold either the ALARM 1 or
AM
The Caution Marking and Rating plate are located at the bottom enclosure of the apparatus.
ALARM 2 setting button. The display will
IMPORTANT: The first time you connect your new SmartSet® clock radio to the
AC outlet the internal computer will automatically set the time correctly for the
Eastern Time Zone, which is the initial default setting. The display will scan for a
few seconds and then show the correct Day and Time in the Eastern zone. If you
live in the Eastern Time zone, there's nothing else to do. Your clock is set correctly
and running.
FCC Information
IMPORTANT SAFETY INSTRUCTIONS
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
change from the correct time to the Alarm 1
1.) Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.
2.) Do not use this apparatus near water.
or Alarm 2 wake up time.
3.) Clean only with dry cloth.
2.) While holding the ALARM 1or ALARM 2 setting button, depress either the
SET + or - button to move the display ahead or back to your desired wake up time.
3.) When the desired wake up time appears on the display, release the SET + or -
buttons.
NOTE: Be sure that you have set the wake up time correctly by observing the AM
indicator. If the AM indicator is 'On ' the wake up time is "AM". If the AM indicator is
'Off', the wake up time is "PM".
4.) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
5.) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
6.) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
7.) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
If you do not live in the Eastern Time zone you must change the default zone
display to your own zone. You only do this one time and the Smart Set® will remember
the new default zone setting and will always return to that setting after a power
interruption.
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4.) When the desired wake up time (AM or PM) appears on the display, release the
ALARM 1 or ALARM 2 setting buttons.
There are 7 time zones programmed into your Smart Set® clock radio as follows :
8.) Only use attachments / accessories specified by the manufacturer.
9.) Unplug this apparatus during lightning storms or when unused for long periods of time.
10.) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
•
Consult the dealer or an experienced radio/TV technician for help.This device complies with
Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
ZONE 1 — Atlantic Time
ZONE 3 — Central Time
ZONE 5 — Pacific Time
ZONE 7 — Hawaiian Time
ZONE 2 — Eastern Time (Default Setting)
ZONE 4 — Mountain Time
ZONE 6 — Yukon Time
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Selecting The Alarm Week Mode
Your SmartSet® clock radio allows you to select from among three different alarm
operation modes for either alarm. The alarm modes are:
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
11.) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
• Everyday ― the alarm will turn on all 7 days.
To change the default time zone display,
depress the TIME ZONE button. The number
"2" will appear on the display indicating that the
default zone is ZONE 2, Eastern Time.
PREPARATION FOR USE
12.) The apparatus shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on apparatus.
13.) Mains plug is used as disconnect device and it should remain readily
operable during intended use. In order to disconnect the apparatus from the
mains completely, the mains plug should be disconnected from the mains
socket outlet completely.
• Weekdays only ― the alarm will only turn on Monday through Friday;
• Weekends only ― the alarm will only turn on Saturday and Sunday.
To check the Alarm Mode setting for Alarm1, depress the ALARM 1 setting button.
The display will show the Alarm 1 wake up time and the DAY OF WEEK indicators
will show you the alarm mode which is selected.
Unpacking And Set Up
• Remove the radio from the carton and remove all packing material from the
radio. We suggest that you save the packing material, if possible, in the unlikely
14.) Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
event that your radio ever needs to be returned for service. The original carton
and packing material is the only safe way to pack your radio to protect it from
damage in transit.
.
PRÉCAUTION: Danger d’explosion si les piles sont remplacées de facon incorrect. Remplacer
• Remove any descriptive labels or stickers on the front or top of the cabinet. Do
les piles seulement par le méme type de pile ou l’équivalent.
3
7
5
1
|