DELVCAM DELV TOUCH 10SDI User Manual
Delvcam  
DELV-TOUCH-10SDI  
User Guide  
1. PRODUCT DESCRIPTION  
1．Dial: turn up and down to adjust the value of menu option; press to confirm.  
2．INPUT: circularly switch among of VIDEO, HDMI, VGA and SDI.  
3．F1-F3: User-definable buttons.  
Default function:  
F1: Waveform  
F2: Vector  
F3：Level Meter  
（function customized to meet your needs）  
2
1. VGA interface.  
2. Battery power on/off switch: “O” is power off; “|” is power on.  
3. DC 12V power input.  
4. DC/TALLY connector.  
5. HDMI input interface.  
6. HDMI output interface (Optional).  
7. Video output interface.  
8. A / V input interface.  
9. Earphone jack.  
10. SDI output interface (Optional).  
11. SDI input interface (Optional).  
12. Speaker  
13. Slide to left to connect power cable (connecting with the battery  
plate).  
14. VESA Mounting interface  
3
3. INSTALLATION OF SUNSHADE AND BATTERY PLATE  
Installation of sunshade:  
As shown, buckle the upward side of sunshade cover on the device.  
As shown, press the under buckles of sunshade cover at the same time.  
As shown, bend sunshade panel to meet and paste with sunshade  
interlocking.  
Installation completed.  
4. DV BATTERY MOUNT PLATE  
Standard mounts process  
4
Following three types of battery plates are suitable for this device, model  
F970, QM91D, DU21 & LP-E6 (choose 2 out of 4).  
MODEL: F-970  
MODEL: QM91D  
MODEL: DU21  
MODEL: LP-E6  
DV Battery Mount Plate Specification:  
Model DU21 for battery of Panasonic DV: NV-GS/PV-GS/DZ-MV/GS/H28/H258/H288GK  
series, comply with Panasonic battery DU06/VBD140/SANYO DZhs301sw/Hitachi  
DZ-HS303SW/BZ-BP14S/DZ3200/BP07W.  
Model QM91D for battery of SONY DV:  
DSCR1/F/S/MVCCD/E/HC15E/HC1E/AE1u/DCRTRV828/E/CCD-TRV116/DCR-DVD/PS105  
K/300K/10P/1E series.  
Model F970 for battery of SONY DV: DCR-TRV series, DCR-TRV E series, VX2100E PD P  
series, GV-A700, GV-D800 FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E, HVR-Z1C,  
HVR-V1C, FX7E F330.  
Model LP-E6 for battery of Canon DSLR: 5D Mark II/5D Mark III/EOS7D/EOS60D;  
V-mount battery plate (optional): Please refer to GP-L130AB type  
battery specifications.  
5
V-mount Battery Plate  
Plate Bracket  
Anton Bauer mount battery plate (optional):  
Please refer to GP-L130B type battery specifications.  
Anton Bauer Mount Battery Plate  
Plate Bracket  
5. WIRING INSTRUCTIONS  
Composite cable  
White: audio L  
Red: audio R  
Yellow: video  
A/V signal input  
6. MENU SETTING  
Before setting the functions, please make sure the device is  
connected correctly.  
6
6-1. Touch Control Gesture  
Swipe up to activate the  
shortcut menu.  
Swipe down to hide the  
shortcut menu. (Unable to  
hide the shortcut menu  
without signal input.)  
6-2. F1-F3 3 user-definable function buttons:  
Long press any F1-F3 key for 3-5 seconds to pop-up shortcut menu  
directly. As shown in Figure (default menu button in blue font).  
Slide up and down to select the desired option.  
Finally, press the slider to confirm the selected item as default.  
Functions of FN button can also be customized: Center Marker, Screen  
Marker, Check Field, Color Bar, Aspect Ratio, Camera, PIP, Zoom,  
Pixel-to-Pixel, Freeze Input, Underscan, H/V Delay, Peaking, False  
Color, Exposure, Histogram, Level Meter, Waveform, Vector.  
FN: user-definable function button.  
Default function:  
F1: Waveform  
F2: Vector  
F3: Level Meter  
6-3. Dial Operation  
Turn down the dial to activate Brightness adjustment.  
Turn up and down to adjust the value directly.  
Press the dial to activate options switch among of “Brightness, Contrast,  
7
Saturation, Sharpness, Hue, Volume and Exit”. (Option adjusted currently  
will be default option when user press the dial next time.)  
6-4. MENU Operation  
6-4-1、Shortcut Menu Bar  
Swipe up on the display screen to activate shortcut menu, select the  
option needs to adjust on the menu bar. (Top menu bar: option values all  
shown on screen when click; Bottom menu bar: option values shown  
individually on screen when click.)  
6-4-2. Clock” ”, enter the menu options  
“ ” is return,” ” is exit.  
Main interface  
8
Picture  
ITEMS  
OPTIONS  
Brightness  
Contrast  
Saturation  
Hue  
Sharpness  
Back light  
Volume  
0 – 100  
0 – 100  
0 – 100  
0 – 100  
0 – 100  
0 – 100  
0 – 100  
Display  
9
ITEMS  
OPTIONS  
Auto  
Phase  
OFF, ON  
0 – 63  
Options under VGA  
mode.  
Clock  
0 – 100  
0 – 100  
0 – 100  
OFF, ON  
OFF, ON  
H-Position  
V-Position  
Image Flip  
Color Bar  
Color Temp  
ITEMS  
Color Temp  
OPTIONS  
6500K/ 7300K/ 9300K/ User  
R Gain  
G Gain  
B Gain  
R Offset  
G Offset  
B Offset  
0 ~ 255  
0 ~ 255  
0 ~ 255  
0 ~ 511  
0 ~ 511  
0 ~ 511  
Note: Only available under “User” mode  
to meet the color value you need.  
10  
、Marker  
ITEMS  
Center Marker  
Marker Color  
Marker Mat  
OPTIONS  
OFF, ON  
Red, Green, Blue, White, Black  
0 – 7  
1 – 8  
Thickness  
PIP  
ITEMS  
PIP Mode  
OPTIONS  
Small, Medium, Large, PBP, POP  
PIP Source  
PIP position  
PIP Swap  
Video, VGA , HDMI and SDI (SDI is optional)  
Upper Left, Upper Right, Lower Left, Lower Right  
Signal adjust & switch under PBP and POP modes.  
11  
Setting  
ITEMS  
Language  
LOGO  
OPTIONS  
English, Chinese  
ON, OFF  
Camera  
480P (5DII Mode) / 1080I (5DIII Mode)  
Red, Green, Blue, White, Black  
0 – 100  
Peaking Color  
Peaking Lever  
Exposure Lever  
Reset  
0 – 100  
Upgrade  
7. ACCESSORIES  
Standard Accessories:  
12  
1. Sun Shade Cover  
2. Gimbal bracket  
3. HDMI A/C cable  
4. Mini XLR & TALLY cable  
5. 12V DC adapter  
6. Shoe Mount (for camera only)  
7. Audio output cable  
8. Composite cable  
9. VESA Adaptor Panel  
1 Piece  
1 Piece  
1 Piece  
1 Piece  
1 Piece  
1 Piece  
1 Piece  
1 Piece  
1 Piece  
10. Battery Plate (F-970/QM91D/DU21/LP-E6) 2 Pieces (Choose 2 out of 4)  
11. Adaptor Panel  
12. Suitcase  
13. Manual  
1 Piece  
1 piece  
1 Copy  
Optional Accessories  
1. VESA folding bracket  
2. VGA cable  
3. V-mount Battery Plate  
4. Anton Bauer Mount Battery Plate  
5. Li-ion Battery  
1 Piece  
1 Piece  
1Piece  
1Piece  
1Piece  
8. PARAMETERS  
13  
9. TROUBLE SHOOTING  
1. Only black-and-white display:  
Check whether the color saturation is properly setup or not.  
2. Power on but no pictures:  
Check whether the cables of AV, VGA, HDMI and SDI are correctly connected or not.  
Panel  
Physical Resolution  
Brightness  
10.1” LED Back light  
1280×800  
350cd/㎡  
Contrast  
800: 1  
Viewing Angle  
Input Voltage  
Input Signal  
170°/ 170°(H/V)  
DC 7-24V  
AV, HDMI, VGA and SDI (SDI is optional)  
Power Consumption  
≤ 10W  
Operating Temperature -0℃~50℃  
Storage Temperature  
Dimension (LWD)  
Weight  
-20℃~60℃  
250×170×29.6mm  
735g  
Please use the standard power adapter coming with the product package. Improper  
power input may cause damage.  
3. Wrong or abnormal colors:  
Check whether the cables are correctly and properly connected or not. Broken or  
loose pins of the cables may cause a bad connection.  
4. When on the picture shows size error:  
Swipe up to activate menu, Click “Underscan” to zoom in/out pictures automatically  
when receiving HDMI signals  
5. Other problems:  
Swipe up to activate menu, Click “ →Setting→ Reset ”  
6. According to the ISP, the machine can not function properly:  
ISP for program upgrades, non-professionals do not use. Please reboot your  
device if press accidentally!  
· It is normal to see some bright lines appear on the screen when turn off the device.  
Note: due to constant effort to improve products and product  
features, specifications may change without notice.  
14  

Whirlpool Ace244pt3 User Manual
Soleus Air Sg Cac 10se User Manual
Sharp Fp N40cx User Manual
Samsung Aw0801b User Manual
Samsung Aw07lh Series User Manual
LG LMV 1620DB User Manual
Lexmark 12ez User Manual
DETROIT RADIANT SW 33 User Manual
ASUS Z9PA D8C User Manual
ACER ASPIRE 5 A515 46 User Manual