DELV‐12GSDI‐15
User Guide
15.6” 4K 12G‐SDI Mulꢀformat Monitor
with Road Ready Case Supports 4K Quad Link
SPECIFICATIONS
Display Screen: 15.6 inch IPS LCD
Backlight: LED
Resolution: 3840x2160
Brightness: 330cd/m²
Contrast 1000:1
Aspect Ratio: 16:9
Viewing Angle: 176°/ 176°(H/V)
Input Signal: 12G-SDI, 3G-SDI, HDMI 4K 60Hz, HDMI 1.4 4K 30Hz
Output Signal: 12G-SDI, 3G-SDI Loop
Audio: Audio Level Meter (SDI only)/Headphone Jack /Speaker 1 Watt
Input Voltage: 12-24VDC (XLR)
Power Consumption: 34W
15.3x10.5x1.5 in (20.6x12x6.7 in with case)
Dimensions (LxHxD):
389×267×38mm (524 x 305 x 170mm with case)
7.1 lb (6.5 lb with case)
Weight:
3.2 kg (2 kg with case)
SUNSHADE INSTALLATION
Place the sunshade on the outside edge of the carrying case and press Velcro into place.
Delvcam DELV‐DELV‐12GSDI‐15
Page 3
MONITOR FRONT
1
2
3
4
5
6
7
8
9
10
1 Speaker
2 SDI Select:
SINGLE—12G-SDI 1, 12G-SDI 2, 3G-SDI 3, 3G-SDI 4
2SI—Dual-Link 2SI, Quad-Link 2SI
SQUARE—Quad-Link Square Division Mode
3 HDMI—Select Input
4 MENU/RETURN
5 ◄ Select options in the menu. Before entering the menu, press once to activate volume, press again to scroll
through options.
6 ► Select options in the menu.
7 EXIT Back or exit
8 F1-F4 User definable buttons Default function options:
F1 Display Mode, F2 Display Rotate, F3 Safety Marker, F4 Aspect
9 Power Indicator Light
Red: Standby, Green: Working
10 Earphone Jack
Delvcam DELV‐DELV‐12GSDI‐15
Page 4
MONITOR REAR
1
2
3
4
1 Carrying handle
2 Strain relief bar
3 USB port—FACTORY USE ONLY
4 TALLY input
5
6
5 SDI input (BNC)
6 SDI output (BNC) - corresponds to SDI input
7 HDMI input
HDMI 1: HDMI 2.0, 4K 60Hz
HDMI 2, 3, & 4: HDMI 1.4, 4K 30Hz
8 15VDC power supply XLR connector
9 Power Switch
7
Pin number
Signal
GND
①
8
9
……...
+15V
②③
④
Delvcam DELV‐DELV‐12GSDI‐15
Page 5
◄►
VOLUME OPERATION
◄►
Use the
buttons for volume control.
MENU OPERATION
Turn the power ON. Press the “MENU“ button to access first level options:
Picture
Functions
Display Mode
Display Settings
Input
Audio
System
Information
◄►
Use
buttons to highlight the desired option. Press “MENU” button to confirm. Press “EXIT” button to return / exit menu.
F1 - F4 USER DEFINABLE SHORTCUT BUTTONS
Press and hold any one of the 4 buttons until the shortcut menu appears. Current option will be highlighted in white.
◄►
Using the
buttons, cycle through the options, which will be yellow, unavailable options will be gray. Press the “MENU”
button to set the selected option.
Available options: center marker, safety marker, aspect ratio, under scan, check field, image freeze, peaking, display mode
and image flip.
Default options
F1：Display Mode
F2：Display Rotate
F3：Safety Marker
F4 : Aspect
Delvcam DELV‐DELV‐12GSDI‐15
Page 6
SETTINGS
Picture
Brightness
Contrast
0-100
0-100
Saturation
Hue
0-100
0-100
Sharpness
Temperature
Backlight
Center Marker
0-4
9300, 7500, 6500, 5800, User
0-100
ON, OFF
Safety Marker
Aspect Marker
OFF, 95%, 93%, 90%, 88%, 85%, 80%
Full，17:9, 16:9, 4:3，1.85:1，2.35:1
Aspect
Full，17:9, 16:9, 4:3，1.85:1，2.35:1
Underscan
ON, OFF
Functions
Pixel to Pixel
Check Field
ON, OFF
OFF, Red, Green, Blue
ON, OFF
Freeze Input
Peaking
ON, OFF (image edge enhancement)
ON, OFF
False Color
1P, 2P LR, 2P TB, 2P PIP, 4P
Display Mode
Display Rotate
Display Mirror
Set to region
0°, 90°, 180°, 270°, available in single display
OFF, L/R, U/D, available in dual display
Display Settings
Select Region
Input
SDI 1, SDI 2 , SDI 3 , SDI 4, 2SI, SQUARE, HDMI 1, HDMI 2, HDMI 3, HDMI 4
Volume
0-100
CH0&CH1, CH2&CH3, CH4&CH5, CH6&CH7, CH8&CH9,
CH10&CH11, CH12&CH13, CH14&CH15 (SDI ONLY)
Audio Level Meter—SDI ONLY
Audio
Reset
Resets to default
5-60s
Menu Time
OSD H Position
OSD V Position
Language
0-100
0-100
System
English, Chinese
0-255
Transparency
OSD Rotate
0°, 90°, 270°
0-10
Border Width
Border Color
Displays current information
R, G, B, W
Info
Delvcam DELV‐DELV‐12GSDI‐15
Page 7
SDI SIGNAL CONNECTION
Input Signals
Up to 2-channel, single link 12G-SDI
Up to 4-channel 3GHD-SDI
1 channel quad-link 3G-SDI
Refer to the tables below for the appropriate connectors for each signal.
12G-SDI Single Link Signal
Connector
SDI 1
Input Signal
12G-SDI
SDI 2
12G-SDI
3G-SDI Dual Link Signal
Interleave
3G-SDI Dual Link Signal
Square Division
Connector
SDI 1
Input Signal
Connector
SDI 1
Input Signal
3G-SDI Link 1
3G-SDI Link 2
Sub Image 1, Upper Left Screen/Sub Image 2, Lower Left Screen
Sub Image 3, Upper Right Screen/Sub Image 4, Lower Right Screen
SDI 2
SDI 2
12G-SDI Single Link Signal
Square Division
Quad Link 3G/HD-SDI Signal
Interleave
Square Division Screen View
Connector
SDI 1
Input Signal
Connector
SDI 1
Input Signal
Sub Image 1
Upper Left Screen Upper Right Screen
Sub Image 3
Sub Image 1, Upper Left Screen
Sub Image 2, Lower Left Screen
Sub Image 3, Upper Right Screen
Sub Image 4, Lower Right Screen
3G-SDI Link 1
3G-SDI Link 2
3G-SDI Link 3
3G-SDI Link 4
SDI 2
SDI 2
Sub Image 2
Lower Left Screen Lower Right Screen
Sub Image 4
SDI 3
SDI 3
SDI 4
SDI 4
Signal Formats
4:2:2 YCbCr 10 bits
SDI-SDI 525i, 625i
4:2:2 YCbCr 10bits
1280×720 (23.98/24/25/29.97/30/50/59.94/60p)
HD-SDI
1920×1080 / 2048×1080 (50/59.94/60i) (23.98/29.97/24/25/30p)
(23.98/29.97/24/25/30Psf)
4:2:2 YCbCr 10bits
1920×1080/2048×1080 (47.95/48/50/59.94/60p)
3G-LevelA/DL 3G-Level B
3G-LevelA/DL 3G-Level B
1920×1080/2048×1080 (50/59.94/60i) (23.98/24/25/29.97/30p)
(23.98/24/25/29.97/30Psf)
4:4:4 GBR 10bits
4:4:4 GBR+A 10bits
4:4:4 YCbCr 10bits
4:4:4 YCbCr+A 10bits
4:4:4 GBR 12bits
4:4:4 YCbCr 12bits
3G-SDI
4:4:4 GBR 10bits
3G-LevelA/DL 3G-Level B
1280×720 (23.98/24/25/29.97/30/50/59.94/60p)
4:4:4 GBR+A 10bits
4:4:4 YCbCr 10bits
4:4:4 YCbCr+A 10bits
1920×1080/2048×1080 (50/59.94/60i) (23.98/24/25/29.97/30p)
(23.98/24/25/29.97/30Psf)
4:2:2 YCbCr 10bits
DS 3G-Level B
DS 3G-Level B
4:2:2 YCbCr 10bits
1280×720 (23.98/24/25/29.97/30P
Delvcam DELV‐DELV‐12GSDI‐15
Page 8
SDI SIGNAL CONNECTION
Signal Formats
4:2:2 YCbCr 10bits
3840×2160/4096×2160 (23.98/24/25/29.97/30p)
4:4:4 GBR 10bits
4:4:4 GBR+A 10bits
4:4:4 YCbCr 10bits
4:4:4 YCbCr+A 10bits
4:4:4 GBR 12bits
4:4:4 YCbCr 12bits
4:2:2 YCbCr 12bits
1920×1080/2048×1080 (47.95/48/50/59.94/60p)
6G-SDI Single Link
3840×2160/4096×2160 (47.95/48/50/59.94/60p)
3840×2160/4096×2160 (23.98/24/25/29.97/30p)
4:2:2 YCbCr 10bits
4:4:4 GBR 10bits
4:4:4 GBR+A 10bits
4:4:4 YCbCr 10bits
4:4:4 YCbCr+A 10bits
4:4:4 GBR 12bits
4:4:4 YCbCr 12bits
4:2:2 YCbCr 12bits
3840×2160/4096×2160 (47.95/48/50/59.94/60p)
3840×2160/4096×2160 (23.98/24/25/29.97/30p)
4:2:2 YCbCr 10bits
4:4:4 GBR 10bits
4:4:4 GBR+A 10bits
4:4:4 YCbCr 10bits
4:4:4 YCbCr+A 10bits
4:4:4 GBR 12bits
4:4:4 YCbCr 12bits
4:2:2 YCbCr 12bits
12G-SDI Single Link
4:2:2 YCbCr 10bits
4:2:2 YCbCr 10bits
4:2:2 YCbCr 10bits
3840×2160/4096×2160 (23.98/24/25/29.97/30p)
3840×2160/4096×2160 (23.98/24/25/29.97/30p)
3840×2160/4096×2160 (23.98/24/25/29.97/30p)
HD-SDI Quad Link
3G-SDI Dual Link 2SI
3G-SDI Dual Link
Square Division
4:2:2 YCbCr 10bits
3840×2160/4096×2160 (47.95/48/50/59.94/60p)
3840×2160/4096×2160 (23.98/24/25/29.97/30p)
4:4:4 GBR 10bits
4:4:4 GBR+A 10bits
4:4:4 YCbCr 10bits
4:4:4 YCbCr+A 10bits
4:4:4 GBR 12bits
4:4:4 YCbCr 12bits
4:2:2 YCbCr 12bits
3G-SDI Quad Link
Square Division
4:2:2 YCbCr 10bits
3840×2160/4096×2160 (47.95/48/50/59.94/60p)
3840×2160/4096×2160 (23.98/24/25/29.97/30p)
4:4:4 GBR 10bits
4:4:4 GBR+A 10bits
4:4:4 YCbCr 10bits
4:4:4 YCbCr+A 10bits
4:4:4 GBR 12bits
4:4:4 YCbCr 12bits
4:2:2 YCbCr 12bits
3G-SDI Quad Link 2SI
Delvcam DELV‐DELV‐12GSDI‐15
Page 9
TROUBLE SHOOTING
1. No Image
- Ensure that the power is on and the cables are properly connected.
- Use the standard power adapter that is included as improper voltage
input may cause damage or injury.
2. Incorrect or Abnormal Colors
- Ensure that the cables are properly connected.
- Check the signal source video output.
- Check Saturation for appropriate setting.
- Reset image ratio.
3. Image Size Error
- Go to Menu/Function/Underscan to zoom in and out of pictures
automatically for HDMI signals
3. No Sound
- Press the HDMI button.
- Ensure that the cables are properly connected.
- Check volume control.
4. HDMI 1 No Signal
- Activate the HDMI signal by pressing the HDMI 1 button for 3 to 5 seconds
|