D LINK DES 1105 User Manual

Section 1 - Product Overview  
Product Overview  
Package Contents  
• D-Link DES-1105 5-port Switch  
• Manual and Warranty on CD  
• Four (4) Rubber Feet  
• Wall Mount Kit  
• Power Adapter  
Setup  
The setup of the DES-1105 can be performed using the following steps:  
• The power outlet should be within 1.82 meters (6 feet) of the Switch.  
• Visually inspect the DC power jack and make sure that it is fully secured to the power adapter.  
• Do not cover the ventilation holes on the sides of the Switch, and make sure there is adequate ventilation  
around it.  
• Do not place heavy objects on the switch.  
D-Link DES-1105 User Manual  
3
 
Section 1 - Product Overview  
Introduction  
Fast Ethernet Technology  
The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need  
for high performance networks.100BASE-TX (Fast Ethernet) provides a cost-effective and high-performance solution for  
small workgroups, SMBs (Small to Medium Businesses), and any network supporting bandwidth-intensive applications.  
Fast Ethernet technology operates at 10 times the speed of traditional Ethernet, offering maximum performance and  
enhanced capability for existing Ethernet-based networks.  
100Mbps Fast Ethernet is a standard specified by the IEEE 802.3 LAN committee. It is an extension of the 10Mbps  
Ethernet standard with the ability to transmit and receive data at 100Mbps, while maintaining the CSMA/CD Ethernet  
protocol. Since the 100Mbps Fast Ethernet is compatible with all other 10Mbps Ethernet environments, it provides  
a straightforward upgrade and takes advantage of the existing investment in hardware, software, and personnel  
training.  
Switching Technology  
Switching is a cost-effective way of increasing the total network capacity available to users on a LAN. If an Ethernet  
network begins to display symptoms of congestion, low throughput, slow response times, and high rates of collision,  
installing a switch to a network can preserve much or all of the existing network’s cabling and workstation interface card  
infrastructure, while still greatly enhancing the throughput for users. A switch is a viable solution even if demanding  
applications, such as multimedia production and video conferencing, are on the horizon.The most promising techniques,  
as well as the best return on investment, could well consist of installing the right mixture of Ethernet switches.  
A switch increases capacity and decreases network loading by dividing a local area network into different LAN  
segments. Dividing a LAN into multiple segments is one of the most common ways of increasing available bandwidth.  
If segmented correctly, most network traffic will remain within a single segment, enjoying the full-line speed bandwidth  
of that segment.  
D-Link DES-1105 User Manual  
4
 
Section 1 - Product Overview  
Switches provide full-line speed and dedicated bandwidth for all connections.This is in contrast to hubs, which use the  
traditional shared networking topology, where the connected nodes contend for the same network bandwidth. When  
two switching nodes are communicating, they are connected with a dedicated channel between them, so there is no  
contention for network bandwidth with other nodes. As a result, the switch reduces considerably, the likelihood of traffic  
congestion.  
For Ethernet networks, a switch is an effective way of eliminating the problem of chaining hubs beyond the “two-repeater  
limit.” A switch can be used to split parts of the network into different collision domains, making it possible to expand  
your Ethernet network beyond the 205-meter network diameter limit for 100BASE-TX networks. Switches supporting  
both 10Mbps Ethernet and 100Mbps Fast Ethernet are also ideal for bridging between existing 10Mbps networks and  
newer 100Mbps networks.  
Switching LAN technology is a marked improvement over the previous generation of network hubs and bridges, which  
were characterized by higher latencies. Routers have also been used to segment local area networks, but the cost of  
a router, the setup and maintenance required, make routers relatively impractical.Today switches are an ideal solution  
to most kinds of local area network congestion problems.  
D-Link DES-1105 User Manual  
5
Section 1 - Product Overview  
Features  
• The DES-1105 is a high performance switch designed specifically for environments where traffic on the  
network and the number of users increase continuously.  
• The DES-1105, with its small, compact size, was specifically designed for small to mid-sized workgroups.  
The DES-1105 can be installed where space is limited; moreover, it provides immediate access to a  
rapidly growing network through a wide range of user-reliable functions.  
• The DES-1105 is ideal for deployment with multiple high-speed servers for 10Mbps or 100Mbps shared-  
bandwidth workgroups. With the highest bandwidth at 200Mbps (100Mbps full-duplex mode), any port  
can provide workstations with a congestion-free data pipe for simultaneous access to the server.  
• The DES-1105 is scalable, allowing two or more DES-1105 switches to be cascaded together. Since all  
ports support 200Mbps, any one of its five ports may be used to cascade to an additional switch to open  
a Full-Duplex Fast Ethernet pipe.  
• The DES-1105 is the perfect choice for a department or office planning to upgrade to Fast Ethernet.  
The DES-1105 can accommodate 10Mbps or 100Mbps devices, providing a flexible solution for existing  
(10Mbps) Ethernet workgroups.  
The DES-1105 combines dynamic memory allocation with store-and-forward switching to ensure that the  
buffer is effectively allocated for each port; and it controls the data flow between the transmit and receive  
nodes to guarantee against possible packet loss.  
The DES-1105 is an unmanaged 10/100Mbps Fast Ethernet switch that offers solutions for the accelerating  
bandwidth needs of small Ethernet workgroups.  
D-Link DES-1105 User Manual  
6
 
Section 1 - Product Overview  
Other key features include:  
• Store-and-forward switching scheme capability. As the result of complete frame checking and error frame  
filtering, this scheme prevents error packages from transmitting among segments.  
• Auto-MDI/MDI-X function supports automatic MDI/MDI-X crossover detection, giving true ‘plug and play’  
capability—Crossover or Straight-Through CAT5 cables can be plugged into any port.  
• Nway Auto-negotiation for any port. This allows for auto-sensing of speed (10/100Mbps), providing an  
automatic and flexible solution for the network.  
• Flow control for any port.This minimizes dropped packets by sending out collision signals when the port’s  
receiving buffer is full.  
• Data filtering rate eliminates all error packets, runts, etc., per port at wire-speed for 100Mbps operation  
and 10Mbps operation.  
D-Link DES-1105 User Manual  
7
Section 1 - Product Overview  
Hardware Overview  
Front Panel (LEDs)  
Power:  
This green indicator light is on when the DES-1105 is receiving power; otherwise, it is off.  
Link/Activity (1-5):  
This LED indicator light is green when the port is connected to a 100Mbps Fast Ethernet station. The green indicator  
blinks as Ethernet data is transmitted or received.The indicator light is amber when the port is connected to a 10Mbps  
Ethernet station, or other network device. The amber indicator blinks as Ethernet data is transmitted or received.  
D-Link DES-1105 User Manual  
8
 
Section 1 - Product Overview  
Rear Panel (Connections)  
Auto MDI/MDI-X Ports:  
All ports support automatic MDI/MDI-X crossover detection. The AutoMDI/MDI-X function makes it simple to connect  
to the switch—just plug either a Crossover or Straight-Through CAT5 cable into any port.  
DC Power Jack:  
Power is supplied through an external DC power adapter. Check the technical specification section for information  
about the DC power input voltage.  
Since the DES-1105 does not require a power button, plugging its power adapter into a power outlet will immediately  
power it on.  
D-Link DES-1105 User Manual  
9
 
Section 2 - Installation  
Installation  
This section will explain how to connect Ethernet devices to your new D-Link switch and how to mount the switch.  
Connecting the Switch  
PC to DES-1105  
A computer can be connected to the DES-1105 via a two-pair Category 3, 4, 5 UTP/STP Straight-Through or Crossover  
cable. A computer equipped with a RJ-45 10/100Mbps port can be connected to any of the five DES-1105 ports.  
The LED indicators for the PC connection depend on the capability of the computer’s Ethernet card.If the LED indicators  
are not lit after making a proper connection, check the computer’s Ethernet card, the cable, and the DES-1105’s  
conditions and connections.  
Hub/Switch to DES-1105  
A hub (10 or 100BASE-TX) can be connected to the DES-1105 via a two-pair Category 3, 4, or 5 UTP/STP Straight-  
Through or Crossover cable. For 100Mbps operation a Category 5 cable must be used. The connection is accomplished  
from any port of the hub to any port of the DES-1105.  
DES-1105 to Other Devices  
The DES-1105 can be connected to another switch or other devices (routers, bridges, etc.) via a two-pair Category  
3, 4, 5 UTP/STP Straight-Through or Crossover cable. A Category 5 (or higher) cable must be used for 100Mbps  
operation. The connection can be accomplished from any (MDI-X) port on the DES-1105 to any of the 10Mbps or  
100Mbps (MDI-X) ports on another switch or other devices.  
D-Link DES-1105 User Manual  
10  
 
Section 2 - Installation  
Port Speed & Duplex Mode  
After plugging the selected cable to a specific port, the system uses auto-negotiation to determine the transmission  
mode, auto-detecting the network speed (10Mbps or 100Mbps) for any new twisted-pair connection.  
If the attached device does not support auto-negotiation or has auto-negotiation disabled, an auto-sensing process is  
initiated to select the speed and half-duplex mode is selected.  
D-Link DES-1105 User Manual  
11  
 
Section 2 - Installation  
Mounting the Switch on the Wall  
The DES-1105 can also be mounted on a wall. Two mounting slots are provided on the bottom of the switch for this  
purpose. Please make sure that the front panel is exposed in order to view the LEDs. Please refer to the illustration  
below:  
Mounting on a cement wall  
1. Mount the Nylon screw anchors into a cement wall.  
2. Drive the T3 x 15L screws into the Nylon screw anchors.  
3. Hook the mounting holes of the switch back on the screws.  
Mounting on a wood wall  
1. Drive the T3 x 15 L screws into the wood wall.  
(1) 3/4 inch minimum for wood wall  
(2) 3 inch minimum for cement wall.  
D-Link DES-1105 User Manual  
12  
 
Section 3 - Troubleshooting  
Troubleshooting  
1. Why can´t I share my Internet connection to multiple computers when using my D-Link DES-1105 switch?  
If you are connecting directly to a Cable or DSL modem, you will need a router to “share” your Internet connection or  
a computer using ICS (Internet Connection Sharing) or Proxy. Switches and hubs do not allow you to share a single  
IP address to multiple computers.  
Another alternative is to contact your ISP and purchase extra IP addresses for each additional computer.  
2. Does the DES-1105 switch have an uplink port?  
The DES-1105 has Auto-MDI ports which automatically sense the type of cable being used (e.g. Straight-through or  
Crossover) and adjust themselves accordingly to pass data over the network.  
3.What is the maximum length of Category 3, 4 or 5 twisted pair cable that can be used between the DES-1105  
and other devices such as routers, switches, computers, etc.?  
The maximum length of Category 3, 4 or 5 twisted pair cable that can be used between computers and other devices  
on a network is 100 meters or about 328 feet. Keep in mind that this is a theoretical limit. Usually, you will want to keep  
the distance between devices well below the limit.  
4. What is Store-and-Forward switching?  
Store-and-Forward switching will wait until the entire frame has arrived prior to forwarding it. This method stores the  
entire frame in memory. Once the frame is in memory, the switch checks the destination address, source address,  
and the CRC. If no errors are present, the frame is forwarded to the appropriate port. This process ensures that the  
destination network is not affected by corrupted or truncated frames.  
D-Link DES-1105 User Manual  
13  
 
Appendix A - Networking Basics  
Networking Basics  
Check your IP address  
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a  
DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.  
Click on Start > Run. In the run box type cmd and click OK.  
At the prompt, type ipconfig and press Enter.  
This will display the IP address, subnet mask, and  
the default gateway of your adapter.  
If the address is 0.0.0.0, check your adapter  
installation, security settings, and the settings  
on your router. Some firewall software programs  
may block a DHCP request on newly installed  
adapters.  
If you are connecting to a wireless network at a  
hotspot (e.g. hotel, coffee shop, airport), please contact an employee or adminstrator to verify their wireless network  
settings.  
D-Link DES-1105 User Manual  
14  
 
Appendix A - Networking Basics  
Statically Assign an IP address  
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps  
below:  
Step 1  
Windows® XP - Click on Start > Control Panel > Network Connections.  
Windows® 2000 - From the desktop, right-click My Network Places > Properties.  
Step 2  
Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties.  
Step 3  
Highlight Internet Protocol (TCP/IP) and click Properties.  
Step 4  
Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN  
IP address on your router.  
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address  
192.168.0.X where X is a number between 2 and 99. Make sure that the number  
you choose is not in use on the network. Set Default Gateway the same as the LAN  
IP address of your router (192.168.0.1).  
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1).The  
Secondary DNS is not needed or you may enter a DNS server from your ISP.  
Step 5  
Click OK twice to save your settings.  
D-Link DES-1105 User Manual  
15  
 
Appendix B - Technical Specifications  
Technical Specifications  
DES-1105 Specifications  
Standards  
IEEE 802.3 10BASE-T Ethernet  
IEEE 802.3u 100BASE-TX Fast Ethernet  
Protocol  
CSMA/CD  
Data Transfer Rate  
Ethernet:  
10Mbps (half duplex)  
20Mbps (full-duplex)  
Fast Ethernet: 100Mbps (half duplex)  
200Mbps (full- duplex)  
Topology  
Star  
Network Cables  
10BASE-T:  
2-pair UTP Cat. 3,4,5 (100 m), EIA/TIA- 568 100-ohm STP (100 m)  
100BASE-TX: 2-pair UTP Cat. 5 (100 m), EIA/TIA-568 100-ohm STP (100 m)  
Number of Ports  
DC inputs  
5 x 10/100Mbps auto-negotiation, auto MDI-X ports  
DC 5V/1.2A  
Temperature  
Operating: 0° ~ 40° C (32º to 104º F)  
Storage: -10° ~ 70° C (14ºto 158º F)  
Humidity  
Operating: 10% ~ 90% RH, Non-condensing  
Storage: 5% ~ 90% RH, Non-condensing  
D-Link DES-1105 User Manual  
16  
 
Appendix B - Technical Specifications  
Dimensions (W x H x D):  
EMI:  
(approx.) 147.5* 113* 31.5 mm (5.81* 4.45* 1.24 inch)  
FCC Class B, CE Class B  
Transmission Method:  
RAM Buffer:  
Store-and-forward  
64Kbytes per device  
Filtering Address Table:  
Packet Filtering / Forwarding Rate:  
MAC Address Learning:  
2K entries per device  
10Mbps Ethernet: 14,880/pps100Mbps Fast Ethernet: 148,800/pps  
Automatic update  
RJ-45 Pin Specifications  
The following table shows the standard RJ-45 receptacle/connector and their pin assignments.  
RJ-45 Connector pin assignment  
Contact  
Media Direct Interface Signal  
Rx +(receive)  
Rx - (receive)  
Tx + (transmit)  
Not used  
1
2
3
4
5
6
7
8
Not used  
Tx - (transmit)  
Not used  
Not used  
D-Link DES-1105 User Manual  
17  
 
Appendix C - Contacting Technical Support  
Contacting Technical Support  
D-Link provides free technical support for customers within the United States and within Canada for the duration of  
the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our  
web site or by phone.  
Before you contact technical support, please have the following ready:  
• Model number of the product (e.g. DES-1105)  
• Hardware Revision (located on the label on the bottom of the switch (e.g. rev A1))  
• Serial Number (s/n number located on the label on the bottom of the switch).  
You can find software updates and user documentation on the D-Link website as well as frequently asked questions  
and answers to technical issues.  
For customers within the United States:  
For customers within Canada:  
Phone Support:  
(877) 453-5465  
Phone Support:  
(800) 361-5265  
24 hours a day, seven days a week.  
Monday to Friday 7:30am to 9:00pm EST  
Internet Support:  
Internet Support:  
D-Link DES-1105 User Manual  
18  
 
Appendix D - Warranty  
Warranty  
Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty:  
• Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and  
• Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions  
or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.  
Limited Warranty:  
D-Link warrants that the hardware portion of the D-Link product described below (“Hardware”) will be free from material defects in  
workmanship and materials under normal use from the date of original retail purchase of the product, for the period set forth below  
(“Warranty Period”), except as otherwise stated herein.  
• Hardware (excluding power supplies and fans): Three (3) year  
• Power supplies and fans: One (1) year  
• Free Technical Support - Basic Installation: Ninety (90) days  
The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-  
Link’s option, to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund the  
actual purchase price paid. Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office.The replacement  
hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part  
thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects  
to the defective Hardware. Repaired or replacement hardware will be warranted for the remainder of the original Warranty Period or ninety  
(90) days, whichever is longer, and is subject to the same limitations and exclusions. If a material defect is incapable of correction, or if  
D-Link determines that it is not practical to repair or replace the defective Hardware, the actual price paid by the original purchaser for the  
defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware.All Hardware or part thereof that is replaced  
by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund.  
D-Link DES-1105 User Manual  
19  
 
Appendix D - Warranty  
Limited Software Warranty:  
D-Link warrants that the software portion of the product (“Software”) will substantially conform to D-Link’s then current functional specifications  
for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of ninety  
(90) days (“SoftwareWarranty Period”), provided that the Software is properly installed on approved hardware and operated as contemplated  
in its documentation. D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-Link delivers the  
Software will be free of physical defects.The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under  
this LimitedWarranty will be, at D-Link’s option, to replace the non-conforming Software (or defective media) with software that substantially  
conforms to D-Link’s functional specifications for the Software or to refund the portion of the actual purchase price paid that is attributable  
to the Software. Except as otherwise agreed by DLink in writing, the replacement Software is provided only to the original licensee, and  
is subject to the terms and conditions of the license granted by D-Link for the Software. Replacement Software will be warranted for the  
remainder of the original Warranty Period and is subject to the same limitations and exclusions. If a material non-conformance is incapable  
of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by  
the original licensee for the non-conforming Software will be refunded by D-Link;provided that the non-conforming Software (and all copies  
thereof) is first returned to D-Link. The license granted respecting any Software for which a refund is given automatically terminates.  
Non-Applicability of Warranty:  
The Limited Warranty provided hereunder for Hardware and Software portions of D-Link’s products will not be applied to and does not cover  
any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the  
sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold  
“As-Is” without any warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything  
stated herein to the contrary.  
Submitting A Claim:  
The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired  
and the product is within warranty, the customer shall submit a claim to D-Link as outlined below:  
• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software  
nonconformance in sufficient detail to allow DLink to confirm the same, along with proof of purchase of the product (such  
as a copy of the dated purchase invoice for the product) if the product is not registered.  
• The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt to assist  
the customer in resolving any suspected defects with the product.If the product is considered defective, the customer must  
obtain a Return Material Authorization (“RMA”) number by completing the RMA form and entering the assigned Case ID  
D-Link DES-1105 User Manual  
20  
Appendix D - Warranty  
• After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping  
package to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside  
of the package. Do not include any manuals or accessories in the shipping package. DLink will only replace the defective  
portion of the product and will not ship back any accessories.  
• The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products  
sent COD will either be rejected by D-Link or become the property of D-Link.Products shall be fully insured by the customer  
and shipped to D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible  
for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via  
UPS Ground or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an  
address in the United States, otherwise we will ship the product to you freight collect. Expedited shipping is available upon  
request and provided shipping charges are prepaid by the customer. D-Link may reject or return any product that is not  
packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from  
the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges  
for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by  
D-Link not to be defective or non-conforming.  
What Is Not Covered:  
The Limited Warranty provided herein by D-Link does not cover:  
Products that, in D-Link’s judgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty  
installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the  
model or serial number has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for  
repair, and shipping costs; Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage  
that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other  
products or services provided by anyone other than D-Link;and Products that have been purchased from inventory clearance or liquidation  
sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product.  
While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you use only an Authorized  
D-Link Service Office. Improper or incorrectly performed maintenance or repair voids this Limited Warranty.  
Disclaimer of Other Warranties:  
EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY  
OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A  
PARTICULAR PURPOSE AND NONINFRINGEMENT.  
D-Link DES-1105 User Manual  
21  
Appendix D - Warranty  
IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF  
SUCH IMPLIEDWARRANTY SHALL BE LIMITEDTOTHE DURATION OFTHE APPLICABLEWARRANTY PERIOD SET FORTH ABOVE.  
EXCEPT AS EXPRESSLY COVERED UNDERTHE LIMITEDWARRANTY PROVIDED HEREIN,THE ENTIRE RISK ASTOTHE QUALITY,  
SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT.  
Limitation of Liability:  
TOTHE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY  
OR OTHER LEGAL OR EQUITABLETHEORY FOR ANY LOSS OF USE OFTHE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY  
CHARACTER,WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITEDTO, DAMAGES FOR  
LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF  
OTHER EQUIPMENT OR COMPUTER PROGRAMSTOWHICH D-LINK’S PRODUCT IS CONNECTEDWITH, LOSS OF INFORMATION  
OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNEDTO D-LINK FOR WARRANTY SERVICE)  
RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF  
THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.THE SOLE REMEDY  
FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR  
NONCONFORMING PRODUCT. THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE  
PRICE OF THE PRODUCT COVERED BY THE WARRANTY.THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES  
ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY.  
Governing Law:  
This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental  
or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply.  
This Limited Warranty provides specific legal rights and you may also have other rights which vary from state to state.  
Trademarks:  
D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective  
owners.  
Copyright Statement:  
No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make  
any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as  
stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice.  
Copyright ©2005-2006 by D-Link Corporation/D-Link Systems, Inc. All rights reserved.  
D-Link DES-1105 User Manual  
22  
Appendix D - Warranty  
CE Mark Warning:  
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required  
to take adequate measures.  
FCC Statement:  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment  
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause  
harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-  
Link office.  
D-Link DES-1105 User Manual  
23  
Appendix E - Registration  
Registration  
Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty  
rights.  
Version 1.1  
01/26/2006  
D-Link DES-1105 User Manual  
24  
 

Vector Power City Vec028ac User Manual
Toshiba Air Conditioner Rav Sm1104ut E User Manual
Sanyo Upf234943l User Manual
Samsung Aw22f User Manual
Samsung Apc3240c User Manual
Panasonic Cw Xc60yu User Manual
MAYTAG MMV4205FW 02 User Manual
Masterbuilt Sportsman Elite Xl Pellet Smoker User Manual
JENSEN JHD3630BT User Manual
BLACK DECKER CM1060 User Manual