Quick Installation Guide
Full HD WDR Day & Night Outdoor Network Camera
This document will guide you through
the basic installation process for your new
D-Link Network Camera.
DCS-7513
Documentation also available
on CD and via the D-Link
Website
2. Hardware Overview
Ethernet Jack
RJ-45 connector for Ethernet which
can also be used to power the camera
using Power over Ethernet (PoE).
Power Connector
Connects to a 12 V DC power adapter
(not included).
Audio Out
Connects to speakers.
Audio In
Connects to a microphone.
DI/DO Wiring, 12 V DC output
I/O connectors for external devices.
24 V Power Connector
Connects to 24 V AC power.
Reset Button
Press for 10 seconds to reset the camera
back to the factory default settings.
BNC
Analog video output.
3. SD Card Installation
1
2
Disassemble the Camera
Open the camera by
loosening the two screws.
3
4
Install the SD Card
Push the SD card into the card
slot with the gold contacts
directed towards the base of
the camera. To eject the SD
card, push the SD card into the
slot and release. The SD card
will spring out.
D-Link DCS-7513 Quick Install Guide
3
4. Mounting Instructions
Mounting Installation
Refer to the User Manual for detailed instructions regarding the installation and mounting of
the camera using a mounting bracket.
Figure 2.1
Figure 2.2
Figure 2.3
Figure 2.4
4
D-Link DCS-7513 Quick Install Guide
Connection with a PoE Switch
If you are using a PoE switch, connect the camera to the switch using an Ethernet cable, which
will provide transmission of both power and data over a single cable.
General Connection Using a 12 V DC Power Adapter
1. Connect the network camera to your network using an Ethernet cable.
2. Connect a compatible 12 V power adapter (not included) from the camera to a power outlet.
General Connection Using 24 V AC Power Wiring
1. Connect the network camera to your network using an Ethernet cable.
2. Connect the supplied power cable from the camera to a power source such as your
building's emergency power.
D-Link DCS-7513 Quick Install Guide
5
5. Configuration (Setup Wizard)
InserttheDCS-7513CDintoyourcomputer'sCD-ROMdrivetobegintheinstallation. IftheAutorun
function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click
the Start button and in the box type D:\autorun.exe, where D: represents the drive letter of your
CD-ROM drive.
Click Setup Wizard to begin the installation.
After clicking Setup Wizard, the following window will open.
Click Next to continue.
Click Yes to accept the License Agreement.
To start the installation process, click Next.
Note: The installation may take several minutes to finish.
Click Finish to complete the installation.
6
D-Link DCS-7513 Quick Install Guide
Click on the D-Link Setup Wizard SE icon that was created
in your Windows Start menu.
Start > D-Link > Setup Wizard SE
The Setup Wizard will appear and display the MAC address
and IP address of your camera(s). If you have a DHCP server
on your network, a valid IP Address will be displayed. If your
network does not use a DHCP server, the network camera's
default static IP 192.168.0.20 will be displayed.
Click the Wizard button to continue.
Enter the Admin ID and password. When logging in for the
first time, the default Admin ID is admin with the password
left blank.
Click Next to continue.
Select DHCP if your camera automatically obtains an IP
address from a DHCP server such as a router. Select Static
IP if you want to manually enter the IP settings for the
camera.
Click Next to continue.
Take a moment to confirm your settings and click Restart.
D-Link DCS-7513 Quick Install Guide
7
Viewing Camera via Web Browser
Click on the D-Link Setup Wizard SE icon that was
created in your Windows Start menu.
Start > D-Link > Setup Wizard SE
Select the camera and click the Link button to access the
web configuration.
The Setup Wizard will automatically open your web browser
to the IP address of the camera.
Select admin as the username and leave the password
blank. Click OK to continue.
This section shows your camera’s live video. You can select
your video profile and view or operate the camera. For
additional information about web configuration, please
refer to the user manual included on the CD-ROM or the
D-Link website.
8
D-Link DCS-7513 Quick Install Guide
Notes
D-Link DCS-7513 Quick Install Guide
9
Notes
10
D-Link DCS-7513 Quick Install Guide
Notes
D-Link DCS-7513 Quick Install Guide
11
Technical Support
D-Link’s website contains the latest user documentation and software updates for
D-Link products.
U.S. and Canadian customers can contact D-Link Technical Support through our
website or by phone.
United States
Telephone
(877) 354-6555
World Wide Web
Canada
Telephone
(800) 361-5265
World Wide Web
Version 1.20_130x183
February 25, 2016
RMN0100746A
Copyright ©2016 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link, and the D-Link logo are registered trademarks
of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their
respective owners. Product specifications, size and shape are subject to change without notice, and actual product appearance
12
D-Link DCS-7513 Quick Install Guide
|