Installation
Quick Install Guide
Step 9:
Zero Configuration Setup (with mydlink Cloud Router only)
Note: The Zero Configuration Setup will only work with a registered Cloud Router
and an active mydlink account. If you do not have a mydlink Cloud Router, please
skip to the Easy Setup section.
Easy Setup (all other routers)
Cloud Camera 2200
Click on the Start button to start the wizard and follow the instructions from
the Installation Wizard to finish setting up your camera.
Step 1:
camera model and then underWizard, click the link of the version (Windows or Mac)
youwanttodownload.Dependingonyourwebbrowser,youmayneedtoright-click
the link and select Save link as. Once downloaded, do not launch the wizard until
instructed.
mydlink Portal
After registering your DCS-2132L camera with mydlink, you will be able to remotely
mydlink account, you will see a screen similar to the following:
Step 1:
Attach the power supply to the power input located on the back of the DCS-2132L
and connect it to a wall outlet or power strip. Power is confirmed when the Power
LED is lit. Your Cloud Router will automatically assign your network settings (both
wired and wireless) to your camera.
Step 2:
If you have a WPS-enabled router and want to connect your camera wirelessly to
your wireless network, do not connect the Ethernet cable and continuewithStep3.
Step 1:
Thank you for purchasing the DCS-2132L Cloud Camera 2200. Follow the easy
steps in this guide to properly set up your camera. Please verify that all the package
contents below are available.
Step 2:
Connect the included Ethernet cable to the Ethernet port located on the back of
the DCS-2132L and attach it to your router. Skip to Step 7.
If using an Ethernet connection: Connect the included Ethernet cable to the
Ethernet port located on the back of the DCS-2132L and connect it to your router.
Step 2:
Select your camera from the device list, and your camera’s Live View will appear.
Step 3:
If using a wireless connection: Press and hold the WPS button on the back of the
camera for 5 seconds. The blue WPS status LED will start to blink. Then, press the
WPS button on your Cloud Router within 2 minutes.
Package Contents
DCS-2132L Cloud Camera 2200
CAT5 Ethernet Cable
Attach the power supply to the power input located on the back of the DCS-2132L
and connect it to a wall outlet or power strip. Power is confirmed when the Power
LED is lit.
Step 3:
Step 4:
into your account. Once mydlink detects your camera, a notice will appear that there
is a new device detected. Click on your camera from the New Devices list and then
click Yes to add your camera.
Press and hold the WPS button on the back of the camera for 5 seconds. The blue
WPS status LED will start to blink.
Step 5:
Press the WPS button on your wireless router within 2 minutes. On some routers,
you may need to log into the web interface and then click an on-screen button to
activate theWPS feature. Please refer to your router’s user manual if needed.
Your setup is complete!
Power Adapter
Technical Support
Having trouble installing your new product? D-Link’s website contains the latest
user documentation and software updates for D-Link products. U.S. and Canadian
customers can contact D-LinkTechnical Support through our website or by phone.
You can now unplug your camera and move it to the location of your choice.
If any of the above items are missing, please contact your reseller.
Step 6:
Once theWPS LED stops blinking and the Power LED is green, skip to Step 8.
Step 7:
United States
Telephone: (877) 453-5465
Internet: http://support.dlink.com
Canada
Telephone: (800) 361-5265
Internet: http://support.dlink.ca
System Requirements
Attach the power supply to the power input located on the back of the DCS-2132L
and connect it to your wall outlet or power strip. Power is confirmed when the
Power LED is lit.
• Computer with Microsoft Windows® 7, Vista®, or XP, Mac OS® X (10.5 or above)
• PC with 1.3GHz or above; at least 128MB RAM
• Internet Explorer 7 or above, Firefox 3.5 or above, Safari 4 or above, Chrome 8
or above
• Existing 10/100 Ethernet-based network or 802.11n/g wireless network
• A broadband Internet connection
Copyright ©2012 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries.
Other trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11g and
802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network
traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will
adversely affect wireless signal range. Product specifications, size and shape are subject to change without notice, and actual product
appearance may differ from that depicted on the packaging. Visit dlink.com (US) or dlink.ca (Canada) for more details.
Step 8:
Windows Users - Once the file is downloaded from Step 1, you will have to extract
(unzip) the files. Right-click the file and select to extract the files. Once extracted,
double-click autorun.exe to launch the setup wizard.
Mac Users - Once downloaded, double-click the file to launch the setup wizard.
Version 1.0(US) | May 18, 2012
DCS-2132L
|