D LINK AC2200 DECO MP PLUS User Manual

Smart Home Mesh Wi-Fi System  
Whole Home Wi-Fi | Seamless Roaming | Parental Controls | Antivirus  
User Guide  
AC2200 Smart Home Mesh Wi-Fi System  
Deco M9 Plus  
1910012364 REV1.1.0  
About This Guide  
This guide provides a brief introduction to AC2200 Smart Home Mesh Wi-Fi System and the Deco app, as well as regulatory information.  
Please note that features of Deco may vary slightly depending on the model and software version you have, and on your location, language and internet  
service provider. All images, parameters and descriptions documented in this guide are used for demonstration only.  
Conventions  
More Info  
In this guide, the following conventions are used:  
Specific product information can be found on the product page at  
.
Convention  
Description  
A Technical Support Forum is provided for you to discuss our  
products at http://forum.tp-link.com.  
Stands for AC2200 Smart Home Mesh Wi-Fi System/Unit.  
Deco  
Hyperlinks are in teal and underlined. You can click to  
Our Technical Support contact information can be found at the Help  
center of the Deco app and the Contact Technical Support page at  
Underline  
Teal  
redirect to a website or a specific section.  
Key information appears in teal, including management  
page text such as menus, items, buttons and so on.  
Ignoring this type of note might result in a malfunction  
or damage to the device.  
Note:  
Indicates important information that helps you make  
better use of your device.  
Tips:  
 
Appearance  
Each Deco has an LED that changes color according to its status, two RJ-45 Ethernet ports and a power slot. See the explanation below:  
Yellow  
Start up.  
Blue pulse  
Ethernet Ports: For connecting Deco to your modem, the  
Deco is ready for setup.  
Ethernet outlet or other internet devices.  
Blue solid  
Reset Button: Press to reset Deco to factory default settings.  
USB Port (Reserved)  
Deco is setting up.  
Power Slot: For connecting Deco to the power socket via  
the provided power adapter.  
Green  
Deco is registered and all is well.  
Red  
Deco has an issue.  
2
 
Set Up Your Deco  
Follow the steps below to set up your AC2200 Smart Home Mesh Wi-Fi System.  
1. Download and install the TP-Link Deco app  
2. Log in or sign up with TP-Link ID  
3. Connect your modem to Deco  
Scan the QR code below or go to Google Play  
or the Apple App Store to download the Deco  
app.  
Open the app. Use your TP-Link ID to log in.  
Find and power off your modem. Connect your  
Deco to the modem and power them both on.  
If you don’t have a TP-Link ID, tap SIGN UP.  
The Deco app will guide you through the rest.  
If you don't have a modem, connect the  
Ethernet outlet directly to your Deco.  
Install the app on your Android or iOS  
smartphone or tablet.  
or  
3
 
Set Up Your Deco  
Follow the steps below to set up your AC2200 Smart Home Mesh Wi-Fi System.  
4. Select a location  
5. Create your Wi-Fi network  
6. Add more Decos  
Select a location for this Deco. If its location  
is not listed, you can create a new one by  
choosing Custom.  
Set a network name and a password. These  
will be the name and password you use to  
connect your devices to Wi-Fi.  
You can add more Decos to expand Wi-Fi  
coverage. The app will guide you through the  
process of adding more Decos one by one.  
4
Dashboard  
After you successfully set up your Deco network, you will see the dashboard of the Deco app. Here you can view the working status of all Decos, test  
the internet speed, check the connected devices and manage your network.  
Deco Status & Devices  
Swipe right  
Tap MORE  
5
 
Wi-Fi Settings  
Customize the network name and password of your main network or create a separate network just for guests. You can set a guest network name and  
an easy-to-remember password. You can shake your device to share the network details easily with family and friends.  
Enable a guest network  
Create the network name and password  
Shake to share  
6
 
Set Up Smart Home Devices  
Deco M9 Plus not only delivers seamless wireless connectivity, but also acts as a smart home control point, letting you replace your older smart hubs.  
It connects Wi-Fi, ZigBee and Bluetooth devices to your network and lets you manage them from the Deco App. Whether you're on the couch or on  
the go, you're always in reach of your lights, thermostats, switches and door locks. Follow the steps below to add smart home devices to your Deco  
network.  
1. On the Dashboard page, tap  
.
2. Tap SMART DEVICES.  
3. Select the smart device type.  
7
 
Set Up Smart Home Devices  
Follow the steps below to add smart home devices to your Deco network.  
4. Select your smart device. If not listed,  
select Other Light, for example.  
5. Follow the app's guide to find your smart  
device(s).  
6. Assign a location for your device and tap  
Done.  
8
Automation  
Automation allows you to set interactions between your smart devices. For example, if the bedroom light comes on (which is a trigger), then the air  
conditioner in the bedroom will start running (which is an action). Follow the steps below to create an automation.  
1. Tap Create or  
.
2. Specify the time when this automation will  
3. Follow the app's guide to add a trigger. If you  
set a specific time for the automation, then  
a trigger is optional.  
take effect.  
9
 
Automation  
Follow the steps below to create an automation.  
4. Follow the app's guide to add an action.  
You can delay an action when triggers are fired  
by setting the delay action .  
5. Describe the automation and tap Done.  
10  
Automation  
Automation allows you to set interactions between your smart devices. For example, if the bedroom light comes on (which is a trigger), then the air  
conditioner in the bedroom will start running (which is an action).  
How trigger and action work  
The automations you created are displayed  
here.  
Tap an automation to delete, enable or disable  
it. You can also delete, edit or tap to add  
triggers and actions.  
11  
Automation  
Automation allows you to set interactions between your smart devices. For example, if the bedroom light comes on (which is a trigger), then the air  
conditioner in the bedroom will start running (which is an action).  
When multiple devices are selected for a  
trigger, then you have to specify the trigger  
type.  
12  
Shortcut  
With the tap of an icon, execute a shortcut you created. Follow the steps below to create a shortcut.  
1. Tap Create or  
.
2. Select the shortcut type.  
13  
 
Shortcut  
Follow the steps below to create a shortcut.  
3. Follow the app's guide to add an  
action.  
4. If needed, you can add more actions for one  
shortcut. And tap Done.  
5. Select an icon for the shortcut and descirbe  
it.  
14  
Shortcut  
With the tap of an icon, execute a shortcut you created.  
Shortcut executed  
15  
Parental Controls  
Create profiles for family members and specify the devices that belong to each. Set individualized parental controls including when and for how long  
each person can access the internet. Block inappropriate content and pause the internet. Follow the steps below to set up parental controls.  
1. Tap ADD PROFIE to create a new profile.  
2. Set filter level.  
3. Set time controls.  
16  
 
Parental Controls  
Follow the steps below to set parental controls.  
4. Add devices to this profile and tap Done.  
17  
Antivirus  
There are three ways Deco ensures your home network remains safe: by blocking malicious websites, by protecting the system and applications  
against external attacks and eliminating vulnerabilities, and by preventing infected devices from sending sensitive information outside your network.  
Protection enabled  
Alert history  
Protection disabled  
18  
 
QoS  
There are two ways to use the QoS (Quality of Service) function. You can prioritize the connection of a particular device for a set duration, such as a  
family member's laptop for one hour during a video call. You can also prioritize the online activity that's most important to the whole family, such as  
Streaming or Gaming.  
Prioritize a device  
Prioritize an activity  
Customize  
19  
 
Monthly Report  
Review a monthly list of usage, top 5 visited content, most frequently executed automations and shortcuts, and security threats.  
Safeguard your Deco network  
Top 5 visited content under Parental Controls  
Most frequently executed Shortcut and  
Automation  
20  
 
Switch and Create Network  
You can create, manage and switch between different Deco networks bound to your TP-Link ID.  
Swipe right and tap  
Swipe to switch a network to manage  
Swipe to create a new network  
21  
 
Friends of Deco  
TP-Link works with Alexa and IFTTT. With Alexa, you can use your voice to control functions of the AC2200 Tri-Band Mesh Wi-Fi System. With IFTTT,  
you can create useful connections between devices, apps, services and websites to make your home smarter.  
Friends of Deco  
Alexa and IFTTT  
22  
 
Advanced Features  
Additional features are available under the Advanced menu. You can modify WAN settings (IPv4 & IPv6), control Deco's LED, turn notifications off and  
on, create a domain name for your Deco, set up port forwarding rules to make your local computers accessible to other devices over the internet,  
reserve an IP address for a specific device and change the operating mode.  
IPv4  
IPv6  
LED Control  
23  
 
Register a TP-Link DDNS domain name  
Enable or disable TP-Link DDNS feature  
Set up port forwarding rules  
24  
Reserve IP addresses for specific devices  
Change the operating mode  
25  
Online Upgrade  
TP-Link is dedicated to improving product features and providing a better customer experience. Update Deco when prompted in the Deco app.  
Download new firmware  
Install new firmware  
Up-to-date  
26  
 
Managers  
Add friends and family members to help manage your network. Each manager should have their own TP-Link ID.  
Add as manager  
Manager list  
Remove a manager  
27  
 
Authentication  
COPYRIGHT & TRADEMARKS  
Specifications are subject to change without notice.  
is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product  
names are trademarks or registered trademarks of their respective holders.  
No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or  
adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2018 TP-Link Technologies Co., Ltd. All rights reserved.  
28  
FCC STATEMENT  
Product Name: AC2200 Smart Home Mesh Wi-Fi System  
Model Number: Deco M9 Plus  
Component Name  
I.T.E POWER SUPPLY  
Model  
T120200-2B4  
Responsible party:  
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.  
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821  
Tel: +1 626 333 0234  
Fax: +1 909 527 6803  
E-mail: sales.usa@tp-link.com  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio  
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by  
one or more of the following measures:  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:  
1. This device may not cause harmful interference.  
2. This device must accept any interference received, including interference that may cause undesired operation.  
29  
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the  
equipment.  
Note:ThemanufacturerisnotresponsibleforanyradioorTVinterferencecausedbyunauthorizedmodificationstothisequipment. Suchmodifications  
could void the user’s authority to operate the equipment.  
FCC RF Radiation Exposure Statement  
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be  
co-located or operating in conjunction with any other antenna or transmitter.  
To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this  
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction  
with any other antenna or transmitter.”  
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards,  
FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.  
Issue Date: 2018-03-02  
FCC compliance information statement  
Product Name: I.T.E POWER SUPPLY  
Model Number: T120200-2B4  
Responsible party:  
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.  
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821  
Tel: +1 626 333 0234  
Fax: +1 909 527 6803  
E-mail: sales.usa@tp-link.com  
30  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio  
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by  
one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/ TV technician for help.  
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:  
1)  
2)  
This device may not cause harmful interference.  
This device must accept any interference received, including interference that may cause undesired operation.  
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the  
equipment.  
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards,  
FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.  
Issue Date: 2018-03-02  
CE Mark Warning  
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take  
adequate measures.  
OPERATING FREQUENCY(the maximum transmitted power)  
2412MHz—2472MHz(20dBm)  
5180MHz—5240MHz(23dBm)  
31  
EU declaration of conformity  
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU,  
2009/125/EC and 2011/65/EU.  
RF Exposure Information  
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way  
of health protection.  
The device complies with RF specifications when the device used at 20 cm from your body.  
Restricted to indoor use.  
Canadian Compliance Statement  
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:  
1. This device may not cause interference, and  
2. This device must accept any interference, including interference that may cause undesired operation of the device.  
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux  
deux conditions suivantes :  
1. l’appareil ne doit pas produire de brouillage;  
2. l’utilisateurdel’appareildoitacceptertoutbrouillageradioélectriquesubi,memesilebrouillageestsusceptibled’encompromettrelefonctionnement  
Caution:  
1. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile  
satellite systems;  
2. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the  
equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and  
The high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars  
could cause interference and/or damage to LE-LAN devices.  
32  
Avertissement:  
1. Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de réduire les risques de  
brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;  
2. Le gain maximal d’antenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer à la  
limitation P.I.R.E spécifiée pour l’exploitation point à point et non point à point, selon le cas.  
En outre, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d.,  
qu’ils ont la priorité) pour les bandes 5745-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.  
Radiation Exposure Statement:  
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated  
with minimum distance 20cm between the radiator & your body.  
Déclaration d’exposition aux radiations:  
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être  
installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.  
Industry Canada Statement  
CAN ICES-3 (B)/NMB-3(B)  
Korea Warning Statements:  
당해 무선설비는 운용중 전파혼신 가능성이 있음.  
Продлкт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних доклментів та вимогам, що  
передбачені чинними законодавчими актами України.  
33  
Safety Information  
• Keep the device away from water, fire, humidity or hot environments.  
• Do not attempt to disassemble, repair, or modify the device.  
• Do not use damaged charger or USB cable to charge the device.  
• Do not use any other chargers than those recommended  
• Do not use the device where wireless devices are not allowed.  
• Adapter shall be installed near the equipment and shall be easily accessible.  
Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don't  
hesitate to contact us.  
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to  
improper use of the device. Please use this product with care and operate at your own risk.  
For EU/EFTA, this product can be used in the following countries:  
AT  
EE  
IS  
BE  
EL  
IT  
BG  
EF  
LI  
CH  
FI  
CY  
FR  
LU  
SE  
CZ  
HR  
LV  
SI  
DE  
HU  
MT  
SK  
DK  
IE  
LT  
NL  
UK  
NO  
PL  
PT  
RO  
Explanation of the symbols on the product label  
Symbol  
Explanation  
DC voltage  
Indoor use only  
RECYCLING  
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to  
European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.  
User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.  
34  

Soleus Air Air Conditioner Gm Ttw 10hc User Manual
Samsung Us14sggb User Manual
Samsung Ch44zax User Manual
Philips Ss211p User Manual
Panasonic Cw C240sr User Manual
Panasonic Cs F24dd1es User Manual
LG 75UL3J B User Manual
JVC AV 27MF47 User Manual
BLACK DECKER HHVJ315BMF User Manual
ASUS SABERTOOTH Z170 MARK 1 User Manual