R
+
SWRGM-49N
Radio Replacement Interface with Steering Wheel Control
Retention for Select GM LAN Bus Vehicles 2010-2017
RADIO REPLACEMENT
SWC RETENTION
INTERFACING SOLUTIONS
PRODUCT FEATURES:
- Retains factory features in select GM LAN Bus vehicles while funcꢀoning with an aſtermarket radio.
- Retains chime funcꢀons.
- Retains factory Steering Wheel Controls.
- Supports Bose amplified, Premium Y-91 and non-amplified audio systems.
- Retains RAP (Retained Accessory Power).
- Includes factory backup camera retenꢀon harness.
- Includes antenna adapter.
PARTS INCLUDED:
SWRGM-49N Module SWRGM-49N Harness
SWC Cables
Camera Retenꢀon
Antenna Adapter
Harness
INSTALLATION DIAGRAM:
AFTERMARKET
RADIO SELECTOR
(See Chart)
Reverse Gear
Illumina�on (+)
+12V Constant
+12V ACC
Red/White
Orange
AFTERMARKET
RADIO
Yellow
Red
Black
ON
Ground
1
2
3
Right Front (+)
Right Front (-)
Le� Front (+)
Le� Front (-)
Le� Rear (+)
Le� Rear (-)
Right Rear (+)
Right Rear (-)
Gray
Gray/Black
White
White/Black
Green
Green/Black
Violet
3.5MM SWC CABLE
Plug in the 3.5MM SWC cable to the 4-pin port
on the module. See “DIP SWITCH SETTINGS”section.
Chime volume
adjustment
Violet/Black
Option B:
16-Pin Black
Connector
To aftermarket
Radio SWC Input
44-PIN
CONNECTOR
OR
Non Bose
Bose
TO FACTORY
HARNESS
Option A:
Insulate with tape
if not being used
See page 2 for Audio
connection options
BLUE / YELLOW
(for Kenwood or JVC)
Gray 16-Pin
Connector
To Aftermarket
Radio Rear Camera Input
To OEM Camera
Harness
Vehicle Speed Sense
(Green/White)
1 of 2
rev.020921
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
|