Getting Started
ENGLISH
•
•
•
•
•
Reading this guide will help you learn to use the printer properly.
Store this guide safely so that you can use it in the future.
CEL-SV9VA210
Safety Precautions
•
•
•
Before using the product, please ensure that you read the safety precautions described
below. Always ensure that the product is used correctly.
The safety precautions noted on the following pages are intended to prevent injuries to
yourself and other persons, or damage to the equipment.
Be sure to also check the guides included with any separately sold accessories you use.
Denotes the possibility of serious injury or death.
Warning
• Store this equipment out of the reach of children and infants.
Mistakenly putting the power cord around a child’s neck could result in asphyxiation.
• Use only recommended power sources.
• Do not attempt to disassemble, alter, or apply heat to the product.
• Avoid dropping or subjecting the product to severe impacts.
• To avoid the risk of injury, do not touch the interior of the product if it has been
dropped or otherwise damaged.
• Stop using the product immediately if it emits smoke, a strange smell, or otherwise
behaves abnormally.
• Do not use organic solvents such as alcohol, benzine, or thinner to clean the
product.
• Do not let the product come into contact with water (e.g. sea water) or other liquids.
• Do not allow liquids or foreign objects to enter the product.
This could result in electrical shock or fire.
If liquid comes into contact with the product, unplug it from the outlet and consult your
retailer or a Canon Customer Support Help Desk.
• Do not touch the printer or the power plug during thunderstorms.
This could result in electrical shock or fire. Immediately stop using the equipment and
distance yourself from it.
• Unplug the power cord periodically, and using a dry cloth, wipe away any dust
or dirt that has collected on the plug, the exterior of the power outlet, and the
surrounding area.
• Do not handle the power cord with wet hands.
• Do not use the equipment in a manner that exceeds the rated capacity of the electrical
outlet or wiring accessories. Do not use if the power cord or plug are damaged, or not
fully plugged into the outlet.
• Do not allow dirt or metal objects (such as pins or keys) to contact the terminals or
plug.
• Do not cut, damage, alter, or place heavy items on the power cord.
This could result in electrical shock or fire.
• If a CD-ROM is supplied, do not play it in any CD player that does not support data
CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the loud sounds of a
CD-ROM played on a music CD player. Additionally, playing the CD-ROM(s) in an audio CD
player (music player) could damage the speakers.
3
Safety Precautions
Denotes the possibility of injury.
Caution
• Do not stick any part of your hand into the printer interior.
• Place SELPHY in a safe location where people will not trip over the power cord.
Failure to do this may lead to injury or printer damage.
• Avoid using, placing, or storing the product in the following places:
- Places subject to direct sunlight
- Places subject to temperatures above 40 °C (104 °F)
- Humid or dusty places
- Places subject to strong vibration
This may cause overheating of or damage to the printer or adapter, which may result in
electric shock, burns or other injury, or fire.
High temperature may deform the product or adapters.
Denotes the possibility of damage to the equipment.
CAUTION
• Unplug the product from the power outlet when you are not using it.
• Do not place anything, such as cloth, on top of the printer while in use.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort,
resulting in fire.
• Never reuse paper for printing, even if most of the paper is blank.
Reusing paper may damage the printer if paper jams or the ink sheet adheres to the paper.
• Do not unplug the printer while it is printing.
If you accidentally turn the printer off while printing, restart it and wait until the paper is
ejected. If paper jams and cannot be removed, contact your retailer or a Canon Customer
Support Help Desk. Do not attempt to remove jammed paper by force, which may damage
the printer.
• Do not use the printer near motors or other devices that generate strong magnetic
fields, or in dusty environments.
This may damage the printer or cause malfunction.
4
Before Use
•
•
•
Images printed with this product are to be used for personal enjoyment. Unauthorized
printing of copyrighted material is prohibited.
For information on printer warranty or Canon Customer Support, please refer to the
warranty information provided with your printer User Manual Kit.
Although the LCD monitor is produced under extremely high-precision manufacturing
conditions and more than 99.99% of the pixels meet design specifications, in rare cases
some pixels may be defective or may appear as red or black dots. This does not indicate
damage. It also does not affect printed images.
•
The LCD monitor may be covered with a thin plastic film for protection against scratches
during shipment. If so, remove the film before use.
Initial Preparations
Prepare for printing as follows. This example shows a Postcard-size Color Ink / Paper Set
(sold separately), but the same steps are followed for other sizes.
Preparing the Ink Cassette
1 Check the ink cassette and ink sheet.
zz
Holding the ink cassette without touching the ink sheet,
check the size (such as “Postcard Size” or “Card Size”) to
make sure it matches the size of paper you will print on.
zz
Make sure the ink sheet is taut. Loose ink sheets may
tear when loaded. If the sheet is loose, turn the sprocket
as shown.
Ink sheet
zz
For an ink cassette that has a lock on the bottom, press
the lock (as shown) to release it as you turn the sprocket
to make the sheet taut.
• Do not hold the ink cassette with wet hands. Avoid touching the ink sheet, and avoid
getting dust on it. Dirt or moisture may cause banding or affect print quality, tear ink
sheets and prevent printing, or damage the printer.
• When turning the sprocket, turn it gently, only until the sheet is taut. Forcing the
sprocket or overtightening it may tear ink sheets and prevent printing, or SELPHY
may run out of ink before paper.
• Never reuse ink cassettes, which may damage the printer or cause malfunction.
5
Initial Preparations
Preparing the Paper Cassette
1 Check the paper size.
zz
Check the size on the paper cassette (such as “Postcard
Size” or “Card Size”) to make sure it matches the size of
the ink cassette.
2 Open both covers.
zz
There are two layers of covers. First open the outer cover
(
), and then the inner cover ( ).
3 Load the paper.
zz
Glossy
side
Load the paper in the paper cassette.
zz
The paper cassette holds up to 18 sheets. Loading
19 or more sheets may damage the printer or cause
malfunction.
zz
Holding the paper as shown, load it with the glossy side
up. (Do not touch the glossy side of the paper, which may
affect print quality.)
zz
Remove any protective sheets from the paper, and load
only paper into the cassette.
zz
When making postcard prints with space for a stamp, load
the paper with the stamp area facing as shown.
4 Close the inner cover.
zz
Close the inner cover firmly until it clicks into place.
zz
Leave the outer cover open when printing.
6
Initial Preparations
• This product is designed to achieve excellent performance when used with genuine
Canon Color Ink / Paper Sets for SELPHY CP printers. Canon shall not be liable for
any damage to this product caused by the use of non-genuine Canon Color Ink /
Paper Sets for SELPHY CP printers.
• Never do the following. This may damage the printer or cause malfunction.
-Loading paper upside-down, with the glossy and back sides reversed
-Bending or separating paper at the perforations before printing
-Using label paper whose upper label surface is peeling off or has been partially
pulled up
-Writing on paper before printing
-Reusing paper, such as printing on blank areas
• Do not touch the springs on the paper cassette. Accidentally bending the springs
may prevent efficient paper feeding.
• Note that one spring is attached in the center on the top of card-size paper
cassettes.
• Avoid touching or rubbing the glossy, printing side of the paper. Do not handle paper
with wet hands, and keep paper free of dust. Dirt or moisture may cause banding or
affect print quality, or damage the printer.
Loading the Cassettes
1 Open the covers.
zz
Open the ink and paper compartment covers.
2 Load the ink cassette.
zz
Insert the ink cassette into the printer in the direction of
the arrow on the cassette until it clicks into place.
zz
Close the ink cassette compartment cover.
3 Load the paper cassette.
zz
Making sure the outer cover is open, insert the paper
cassette all the way into the compartment.
7
Initial Preparations
Connecting the Power
1 Plug the adapter cord into SELPHY.
zz
Insert the adapter plug fully into the power inlet on
Y
R
E
T
T
A
B
SELPHY.
2 Connect the power cord.
zz
Connect the power cord to the compact power adapter,
and then plug the other end into a power outlet.
Attaching the Dust Protection Covers
Attaching the dust protection covers will help keep paper clean and free of dust. Note that
dust protection covers are not included in some regions.
Attaching and Removing the Back Cover
zz
Insert the back dust protection cover as shown to attach it.
zz
Insert the cover fully, leaving no gaps between it and the
printer.
zz
To remove, first lift it upwards to release the tabs, and
then pull it towards you.
Attaching and Removing the Front Cover
zz
Insert the tab of the front dust protection cover as shown.
zz
To remove, pull it towards you.
• It may not be possible to keep paper free of dust outdoors or in dusty environments.
Be careful about where you use the printer.
8
Initial Preparations
Regular Cleaning
If a cleaner unit is included, you may wish to perform regular cleaning to prevent dust or dirt
from causing banding on prints. Note that the cleaner unit is not included in all regions.
Clean the printer.
zz
Remove the ink cassette if it is in the printer.
zz
With the arrow side face-up, slide the cleaner unit all the way
in and out of the ink cassette compartment 2 – 3 times.
zz
Store the cleaner unit in a bag or other container to keep
it free of dust.
• Do not touch the white strip on the cleaner. This may affect cleaning performance.
• Do not use other types of cleaners, which may damage the printer.
• If prints are affected by banding even after you use the cleaner unit, contact a
Canon Customer Support Help Desk.
Choosing the Display Language
1 Turn on SELPHY.
zz
Press the <q> button until the screen on the left is
displayed.
zz
To turn off SELPHY, hold the <q> button again until the
screen changes.
2 Raise the screen (LCD monitor).
zz
Never force the screen up more than 45°, which may
damage the printer or cause malfunction.
Approx. 45°
3 Access the setting screen.
zz
Press the <k> button.
zz
Press the <o> button.
4 Access the language setting screen.
zz
Press the <u><d> buttons to select [Language], and
then press the <o> button.
5 Choose a language.
zz
Press the <u><d><l><r> buttons to select a
language, and then press the <o> button.
9
Checking Supported Memory Cards
Supported memory cards are as follows.
•
•
•
•
•
•
SD Memory Card
•
•
•
•
•
microSDHC Memory Card*
microSDXC Memory Card*
CF (CompactFlash) Card
Microdrive
SDHC Memory Card
SDXC Memory Card
miniSD Memory Card
miniSDHC Memory Card*
microSD Memory Card*
*
xD-Picture Card*
* Requires an optional dedicated adapter.
• For memory cards that require an adapter, always insert the card into the adapter
before inserting the adapter into the card slot. If you mistakenly insert the memory
card into the card slot without an adapter, you may not be able to remove the card
from the printer.
• Use a memory card formatted with the device you shot the photos with. Images on
cards formatted with a computer may not be recognized.
Printing Images (Select & Print)
Select images and specify the number of prints as follows. Here, printing from an SD
memory card is described as an example, but you can print from other memory cards with
the same steps.
1 Turn on SELPHY and raise the screen.
zz
Follow steps 1 – 2 in “Choosing the Display Language” to
turn on SELPHY and raise the screen.
2 Insert the memory card into the slot.
zz
Insert the memory card facing as shown until it clicks into
place.
zz
To remove the card, push it in until it clicks, and then
slowly release it.
zz
displayed.
The image display screen used in the next step is
Label side
3 Choose an image.
zz
Press the <l><r> buttons to select an image to print.
zz
To jump forward or back by five images, hold down the
<l><r> buttons.
Prints of current
image
Total prints
10
Various Printing Options
4 Specify the number of prints.
zz
Press the <u><d> buttons to specify the number of
prints.
zz
To increase or decrease the quantity by five prints, hold
down the <u><d> buttons.
zz
To print other images at the same time, repeat steps 3 – 4.
5 Print.
zz
Press the <p> button to start printing.
zz
While printing, paper passes in and out of the back of
SELPHY several times. Do not touch the paper until
printing is finished and the print is ejected onto the paper
cassette.
zz
Do not allow 19 or more prints to collect in the ejection
area on the paper cassette.
zz
To cancel printing in progress, always press the <v>
button.
• Never pull out the paper cassette, open the ink cassette compartment cover, or
remove a memory card while printing or when you hear printer operation sounds
immediately after it has been turned on. This may damage the printer.
• To cancel printing in progress, always press the <v> button. Printing cannot be
canceled by pressing the <q> button, and unplugging the printer may damage it.
Various Printing Options
When using the features described here, you should always refer to the downloaded PDF
manual and read any precautions.
Printing All Images
Print all images on a memory card at once as follows.
•
Press the <k> button, and then select [Print All Images].
Cropping Images
Print only selected areas of an image as follows.
Choose an image and then press the EDIT button to perform the setting.
•
11
Various Printing Options
Printing ID Photos
Images can be printed for use in photo identification. You can choose from the following
three sizes: [Custom], [Standard] and [Dual].
With [Custom] and [Standard], two different images can be printed on each sheet.
* The dimensions of [Standard] conform to ICAO international standards.
1 Specify ID photo printing.
zz
Press the <k> button.
zz
Press the <u><d> buttons to select [ID Photo], and then
press the <o> button.
2 Specify the finished size of the photo.
zz
Press the <l><r> buttons to specify how the size is
determined.
zz
[Custom]: Press the <u><d> buttons to select [Long
Side], and then press the <l><r> buttons to specify the
length. Specify the [Short Side] length, and then press the
<o> button.
zz
[Standard] or [Dual]: Check the indicated image size and
press the <o> button.
3 Choose an image.
zz
Press the <l><r> buttons to select an image, and then
press the <u> button.
is shown in the lower right.
zz
To specify the cropping area, press the EDIT button in the
image selection screen.
zz
With [Standard] and [Dual], to print a photo that conforms
to standards for face size and position, adjust the crop
frame so that one line is above the head and the other is
below the chin.
4 Print.
zz
Print as described in step 5 of “Printing Images (Select &
Print)”.
12
Various Printing Options
• To display the ID Photo Settings screen by default when a memory card is inserted, and after printing,
press the <k> button, choose [Change Settings] [ID Photo Priority], and then select [On].
• The photo may not be accepted as an official ID photo, depending on the intended purpose. For
details, contact the institution that requires the photo.
Printing with Different Settings
Images can be printed with a print finish, with or without borders, with different page layouts,
and after correcting the images.
•
Press the <k> button and select [Change Settings].
• In [Keep Print Settings], you can have SELPHY retain the [Borders] and [Page
Layout] settings.
Printing without a Power Outlet
To print where no power outlet is available, use Battery Pack NB-CP2L (sold separately).
Attaching the Battery Pack
1 Remove the battery pack mounting cover.
zz
With the switch held in the direction of the arrow (
Y
R
E
T
T
A
B
), move the cover in the direction of the arrow ( ) to
remove.
Air Vent
2 Remove the battery terminal cover.
3 Attach the battery pack.
zz
Slide the terminal-end in the direction of the arrow (
)
and insert the other end ( ) until it clicks into place.
13
Various Printing Options
Charging the Battery to Use SELPHY
•
•
•
Once SELPHY is connected to a power outlet, charging starts and [
screen.
] blinks on the
] will no
When charging is finished in about four hours (at room temperature), [
longer be displayed.
SELPHY can be turned on for use even while [
] is blinking. However, charging will
then stop. When power is turned off, [ ] blinks and charging resumes.
• For battery precautions, refer to the battery user manual.
• When [
] is displayed, place SELPHY in an environment at operating temperature, and
charge once it has adjusted to the ambient temperature.
• When [
clear [
] is displayed, press and hold any button other than <q> for 3 seconds or more to
]. To check if the battery is still charging, you can press any button other than <q>,
and [
] will appear for around 10 seconds.
• When [
] is displayed in red, the battery has reached the end of its life. Please purchase a
new battery.
• For battery precautions, refer to the battery user manual.
14
Use of genuine Canon accessories and consumables is recommended.
This product is designed to achieve excellent performance when used with genuine Canon
accessories and consumables.
Canon shall not be liable for any damage to this product and/or accidents such as fire,
etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/ or
explosion of a battery pack). Canon’s commercial warranty (where offered) does not cover
the damage caused by the use of any non-genuine accessories or consumables.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
Connecting to a Computer
To connect SELPHY to a computer, use a USB cable (sold separately, maximum 2.5 m
[8.2 ft.]) that has a Mini-B connector on the SELPHY end.
Trademarks and Licenses
•
•
•
•
•
The CF5 logo is a trademark of CompactFlash Association.
The SDXC logo is a trademark of SD-3C, LLC.
All other trademarks are the property of their respective owners.
This device incorporates exFAT technology licensed from Microsoft.
Portions of the code used in the firmware are based in part on the work of the
Independent JPEG Group.
Online product registration
Take a few minutes to register your product online at
•
•
Your own secure Canon account and login
With access to Canon services such as irista and The Gallery.
The latest product and promotion information direct to your inbox
Subscribe to our emails and be the first to get news about products, events and
promotions as well as practical advice, hints, tips and tutorials.
•
Information personalised to you
Tell us a little bit more about you and your Canon products so that we can tailor the
information we send you.
15
Only for European Union and EEA (Norway, Iceland and Liechtenstein)
These symbols indicate that this product is not to be disposed of
with your household waste, according to the WEEE Directive
(2012/19/EU), the Battery Directive (2006/66/EC) and/or national
legislation implementing those Directives.
If a chemical symbol is printed beneath the symbol shown above,
in accordance with the Battery Directive, this indicates that a heavy
metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in this
battery or accumulator at a concentration above an applicable threshold specified in the
Battery Directive.
This product should be handed over to a designated collection point, e.g., on an authorized
one-for-one basis when you buy a new similar product or to an authorized collection site for
recycling waste electrical and electronic equipment (EEE) and batteries and accumulators.
Improper handling of this type of waste could have a possible impact on the environment
and human health due to potentially hazardous substances that are generally associated
with EEE. Your cooperation in the correct disposal of this product will contribute to the
effective usage of natural resources.
For more information about the recycling of this product, please contact your local city
office, waste authority, approved scheme or your household waste disposal service or visit
CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
PRINTED IN THE EU
© CANON INC. 2015
16
|
