PowerShot G16 Connecting to a printer and printing via Wi-Fi
•
Press the <FUNC./SET> ( ) button to access the keyboard, and use it to enter a nickname for
the camera.
3. Press the < >< >< >< > buttons, to choose [
button.
], and then press the <FUNC./SET> (
)
4. Press the < >< >buttons to choose [Add a Device], and then press the <FUNC./SET> ( ) button.
NOTE
•
•
Once a printer is added, the printer name will be displayed on the screen in step 4. To connect
to a printer again, simply choose the printer name from the list.
Once you have connected to devices via Wi-Fi, recent destinations willbe listed first when you
access the Wi-Fi menu by pressing the < >button. You can easily connect again by pressing the
<
>< > buttons to choose the device name. To add a new device, display the device
selection screen by pressing the < >< > buttons, and then configure the setting. If you
prefer not to display recent target devices, press the <MENU > button, and on the [
choose [Wi-Fi Settings] > [Target History] > [Off].
] tab,
5. Choose the displayed SSID (network name) from the printer's Wi-Fi setting menu.
Enter the encryption key displayed on the camera's screen in the password field.
6. Once the printer is ready for the connection, the printers name will be displayed on the camera.
Press the <FUNC./SET> ( ) button.
•
The printer is added and the printing screen appears.
Printing Images
7. Press the < >< > buttons to choose an image.
8. After pressing the <FUNC./SET> ( ) button, press the < >< > buttons to choose [
the <FUNC./SET> ( ) button again to access the print screen.
] and press
9. The screen for specifying the print settings appears.
Press the < >< > buttons to choose the number of prints.
If you want to print the shooting date, press the
Then, choose [Paper Settings].
<
>< > buttons to set the date.
10. The screen for setting the paper size appears.
Press the < >< > buttons to choose the paper size, and then press the <FUNC./SET> (
button.
)
([9x13cm] has been selected in the example image above.)
11. The screen for setting the paper type appears.
Press the < >< > buttons to choose the paper type, and then press the <FUNC./SET> (
button.
)
([Photo] has been selected in the example image above.)
12. The layout (border) settings screen appears.
Press the < >< > buttons to choose a layout, and then press the <FUNC./SET> ( ) button.
([Bordered] has been selected in the example image above.)
13. The camera returns to the print setting screen.
Make sure that the settings are correct. Press the <FUNC./SET> ( ) with [Print] selected to begin
printing.
|