Camera User Guide
• Make sure yod thguide, including the “Safety
Precautions” beore using the camera.
• Readinthis guiwill help you learn to use the camera
properly
• Store this guide safely so that you can use it in the future.
ENGLISH
Preliminary Notes and Legal
Information
•
•
Take and review some test shots initially to make sure the images were
recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be
recorded in a way that is machine readable.
Images recorded by the camera are intended for personal use. Refrain
from unauthorized recording that infringes on copyright law, and note that
even for personal use, photography may contravene copyright or other
legal rights at some performances or exhibitions, or in some commercial
settings.
•
•
The camera warranty is valid only in the area of purchase. In case of
camera problems while abroad, return to the area of purchase before
contacting a Canon Customer Support Help Desk.
Although the LCD monitor is produced undr extremely high-precision
manufacturing conditions and more an 999% of the pixels meet
design specifications, in rare cases e pixels may be defective or may
appear as red or black dots. dos not indicate camera damage or
affect recorded images.
•
•
The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If covered, remove the film before
using the camera.
When the camera is used over an extended period, it may become warm.
This does not indicate damage.
Organization of Camera User Guide
The following guides are included, each used for different purposes.
•
Gives basic instructions, from initial preparations to shooting, playback,
and saving on a computer
•
Practical guide that introduces other camera basics and describes
shooting and playback options
3
Part Names and Conventions in This Guide
Front dial
Lamp
Power button/lamp
Mode dial
Lens
Hot shoe
Zoom lever
<
(Flash up)> switch
Shooting:<i(telephoto)> /
<j(wide angle)>
Flash
Spea
Playback:<k(magnify)> /
g relese button
coupler cable port
Mmory card/battery cover
Tripod socket
<g(index)>
Strap mount
Shutter button
•
•
•
Shooting modes and on-sceen icons and text are indicated in brackets.
: Important information you should know
: Notes and tips for expert camera use
• =xx: Pages with related information (in this example, “xx” represents a
page number)
•
•
Instructions in this guide apply to the camera under default settings.
For convenience, all supported memory cards are simply referred to as
“the memory card”.
•
The tabs shown above titles indicate whether the function is used for still
images, movies, or both.
Still Images
:
Indicates that the function is used when shooting or
viewing still images.
Movies
:
Indicates that the function is used when shooting or
viewing movies.
•
The following camera buttons and controls are represented by icons.
<o> Up button on back
<q> Left button on back
<r> Right button on back
<p> Down button on back
<7> Control dial on back
<z> Front dial on front
4
Part Names and Conventions in This Guide
<
(Shortcut)> / <c(Direct print)>
Remote terminal
button
AV OUT (Audio/video output) /
DIGITAL terminal
HDMITM terminal
<+(AE lock/FE lock)> /
<
(Filtering image display)> button
<
(AF Frame Selector)> /
n> button
<a(Single image erase)> button
Screen (LCD monitor)
Diopter adjustment dial
Viewfinder
<
(Metering)> button
<
(ISO speed)> / Up button
<e(Macro)> / <f(Manual focus)> /
Left button
Microphone
Control dial
Indicator
FUNC./SET button
Exposure compensation dial
<1(Playback)> button
Movie button
<h(Flash)> / Right button
<l(Display)> / Down button
zzTurning the control dial is one way to
choose setting items, switch images, and
perform other operations. Most of these
operations are also possible with the
<o><p><q><r> buttons.
•
In this guide, icons are used to represent the corresponding camera
buttons and dials on which they appear or which they resemble.
5
Table of Contents
3
Table of Contents...........................6
4
1
5
2
6
Table of Contents
8
9
6
7
7
Contents: Basic Operations
zzAdd a date stamp................................................................................. 67
zzUse Face ID ................................................................................. 69, 177
1
View
zzOn a TV.............................................................................................. 239
zzOn a computer ..................................................................................... 31
E
Shoot/View Movie
c
Print
zzPrint pictures ...................................................................................... 259
Save
9
Safety Precautions
• Before using the product, please ensure that you read the safety
precautions described below. Always ensure that the product is used
correctly.
• The safety precautions noted on the following pages are intended
to prevent injuries to yourself and other persons, or damage to the
equipment.
• Be sure to also check the guides included with any separately sold
accessories you use.
Denotes the possibility of serious injury or death.
Warning
• Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight.
In particular, remain at least 1 meter (39 inches) away from infants when
using the flash.
• Store this equipment out of the reach of chidren and infants.
Strap: Putting the strap around a child’s neck cod result in asphyxiation.
• Use only recommended power sourc
• Do not attempt to disassembler oapply heat to the product.
• Avoid dropping or subjecting tduct to severe impacts.
• To avoid the risk of injur, do not ouch the interior of the product if
it has been dropped or otherwse damaged.
• Stop using the product immediately if it emits smoke, a strange
smell, or otherwise behaves abnormally.
• Do not use organic solvents such as alcohol, benzine, or thinner to
clean the product.
• Do not let the product come into contact with water (e.g. sea water)
or other liquids.
• Do not allow liquids or foreign objects to enter the camera.
This could result in electrical shock or fire.
If liquids or foreign objects come into contact with the camera interior,
immediately turn the camera off and remove the battery.
If the battery charger becomes wet, unplug it from the outlet and consult
your camera distributor or a Canon Customer Support Help Desk.
• Do not look through the viewfinder at bright light sources (such as
the sun on a clear day).
This could damage your eyesight.
10
Safety Precautions
• Use only the recommended battery.
• Do not place the battery near or in direct flame.
• Unplug the power cord periodically, and using a dry cloth, wipe away
any dust and dirt that has collected on the plug, the exterior of the
power outlet, and the surrounding area.
• Do not handle the power cord with wet hands.
• Do not use the equipment in a manner that exceeds the rated
capacity of the electrical outlet or wiring accessories. Do not use if
the power cord or plug are damaged, or not fully plugged into the
outlet.
• Do not allow dirt or metal objects (such as pins or keys) to contact
the terminals or plug.
The battery may explode or leak, resulting in electrical shock or fire. This
could cause injury and damage the surroundings. In the event that a battery
leaks and the battery electrolyte contacts eyes, mouth, skin or clothing,
immediately flush with water.
• Turn the camera off in places where camra use is prohibited.
The electromagnetic waves emitted e camera may interfere with the
operation of electronic instrumenanther devices. Exercise adequate
caution when using the camera cewhere use of electronic devices is
restricted, such as inside airpland medical facilities.
• Do not play the supplid CD-ROM(s) in any CD player that does not
support data CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the
loud sounds of a CD-ROM played on an audio CD player (music player).
Additionally, this could damage the speakers.
Denotes the possibility of injury.
Caution
• When holding the camera by the strap, be careful not to bang it,
subject it to strong impacts or shocks, or let it get caught on other
objects.
• Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
• Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
11
Safety Precautions
• When using the flash, be careful not to cover it with your fingers or
clothing.
This could result in burns or damage to the flash.
• Avoid using, placing or storing the product in the following places:
- Places subject to strong sunlight
- Places subject to temperatures above 40 °C (104 °F)
- Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery,
resulting in electrical shock, fire, burns or other injuries.
High temperatures may cause deformation of the camera or battery charger
casing.
• The slideshow transition effects may cause discomfort when viewed
for prolonged periods.
• When using the separately sold optional lenses, be sure to attach
them firmly.
If the lens becomes loose and falls off, it may crk, and the shards of glass
may lead to cuts.
Denotes the poy odamage to the equipment.
Caution
• Do not aim the camera abright light sources (such as the sun on a
clear day).
Doing so may damage the image sensor.
• When using the camera on a beach or at a windy location, be careful
not to allow dust or sand to enter the camera.
• Do not push down on the flash, or pry it open.
This may cause the product to malfunction.
• In regular use, small amounts of smoke may be emitted from the
flash.
This is due to the high intensity of the flash burning dust and foreign
materials stuck to the front of the unit. Please use a cotton swab to remove
dirt, dust or other foreign matter from the flash to prevent heat build-up and
damage to the unit.
• Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may
occur.
12
Safety Precautions
• Before you discard the battery, cover the terminals with tape or other
insulators.
Contacting other metal materials may lead to fire or explosions.
• Unplug the battery charger from the power outlet after charging is
complete, or when you are not using it.
• Do not place anything, such as cloth, on top of the battery charger
while it is charging.
Leaving the unit plugged in for a long period of time may cause it to
overheat and distort, resulting in fire.
• Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion,
resulting in fire or damage.
• When putting the camera in your bag, ensure that hard objects do
not come into contact with the screen.
• Do not attach any hard objects to the camera.
Doing so may cause malfunctions or damae he screen.
13
14
Initial Preparations
Prepare for shooting as follows.
Attaching the Strap
Attach the strap.
zzAttach the included strap to the camera
as shown.
zzOn the other side of the camera, attach
the strap the same way.
Holding the Camera
zzPlace the strap around your neck.
zzWhen shooting, keep your arms close to
your body and hold the camera securely
to prevent it frm moving. If you have
raised ash, do not rest your fingers
16
Initial Preparations
Charging the Battery
Before use, charge the battery with the included charger. Be sure to charge
the battery initially, because the camera is not sold with the battery charged.
1 Remove the battery cover and
insert the battery in the charger.
zzRemove the cover from the battery, align
the marks on the battery and charger,
and insert the battery by pushing it in (
and down ( ).
)
2 Charge the battery.
zzCB-2LC: Flip out the plug ( ) and plug
the charger into a power outlet ( ).
zzCB-2LCE: lug the power cord into the
charger, tn plug the other end into a
poutlet
CB‑2LC
e harging lamp turns orange and
rging begins.
XXWhen the charging is finished, the lamp
turns green.
CB‑2LCE
3 Remove the battery.
zzAfter unplugging the battery charger,
remove the battery by pushing it in (
)
and up ( ).
• To protect the battery and keep it in optimal condition, do not
charge it continuously for more than 24 hours.
• For battery chargers that use a power cord, do not attach
the charger or cord to other objects. Doing so could result in
malfunction or damage to the product.
• For details on charging time and the number of shots and recording time
17
Initial Preparations
Inserting the Battery and Memory Card
Insert the included battery and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted
in another device), you should format the memory card with this camera
1 Check the card’s write-protect
tab.
zzRecording is not possible on memory
cards with a write-protect tab when the
tab is in the locked (downward) position.
Slide the tab up until it clicks into the
unlocked position.
2 Open the cover.
zzSlide the cove( ) and open it ( ).
3 Insert the battery.
zzWhile pressing the battery lock in the
direction of the arrow, insert the battery
as shown and push it in until it clicks into
the locked position.
zzIf you insert the battery facing the wrong
way, it cannot be locked into the correct
position. Always confirm that the battery
Terminals Battery
Lock
is facing the right way and locks when
inserted.
18
Initial Preparations
4 Insert the memory card.
zzInsert the memory card facing as shown
until it clicks into the locked position.
zzMake sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
Label
5 Close the cover.
zzLower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
• For guidelines on how manots hours of recording can be saved on
19
Initial Preparations
Removing the Battery and Memory Card
Remove the battery.
zzOpen the cover and press the battery
lock in the direction of the arrow.
XXThe battery will pop up.
Remove the memory card.
zzPush the memory card in until it clicks,
and then slowly release it.
XXThe memory card will pop up.
Setting the Date and Ti
Set the current date and time corrs fllows if the [Date/Time] screen
is displayed when you turn te camn. Information you specify this way
is recorded in image propertes when you shoot, and it is used when you
manage images by shooting date or print images showing the date.
1 Turn the camera on.
zzPress the power button.
XXThe [Date/Time] screen is displayed.
20
Initial Preparations
2 Set the date and time.
zzPress the <q><r> buttons to choose an
option.
zzPress the <o><p> buttons or turn the
<7> dial to specify the date and time.
zzWhen finished, press the <m> button.
3 Set the home time zone.
zzPress the <q><r> buttons or turn the
<7> dial to choose your home time zone.
4 nish the setup process.
zzPress the <m> button when finished.
After a confirmation message, the setting
screen is no longer displayed.
zzTo turn off the camera, press the power
button.
• Unless you set the date, time, and home time zone, the [Date/
Time] screen will be displayed each time you turn the camera on.
Specify the correct information.
• To set daylight saving time (1 hour ahead), choose [
] in step 2 and then
choose [ ] by pressing the <o><p> buttons or turning the <7> dial.
21
Initial Preparations
Changing the Date and Time
Adjust the date and time as follows.
1 Access the camera menu.
zzPress the <n> button.
2 Choose [Date/Time].
zzMove the zoom lever to choose the [3]
tab.
zzPress the <o><p> buttons or turn the
<7> dial to choose [Date/Time], and then
press the <m> button.
3 Change the date and time.
ngs
zhe <n> button to close the
me.
• Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
• The date/time battery will be charged in about 4 hours once you insert a
charged battery or connect the camera to an AC adapter kit (sold separately,
• Once the date/time battery is depleted, the [Date/Time] screen will be
the date and time.
22
Initial Preparations
Display Language
Change the display language as needed.
1 Enter Playback mode.
zzPress the <1> button.
2 Access the setting screen.
zzPress and hold the <m> button, and
then immediately press the <n>
button.
3 Set the display language.
zzPress the <o><p><q><r> buttons or
tur<7dial to choose a language,
and en press the <m> button.
ce he display language has been set,
setting screen is no longer displayed.
• The current time is displayed if you wait too long in step 2 after pressing the
m
m
<
<
> button before you press the <n> button. In this case, press the
> button to dismiss the time display and repeat step 2.
• You can also change the display language by pressing the <n> button
and choosing [Language ] on the [3] tab.
23
Still Images
Movies
Trying the Camera Out
Follow these instructions to turn the camera on, shoot still images or
movies, and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
1 Turn the camera on.
zzPress the power button.
XXThe startup screen is displayed.
2 Enter <A> mode.
zzSet the mode dial to <A>.
zzAim the camea at the subject. The
camera will me a slight clicking noise
as it dines he scene.
Xreresenting the scene and image
sation mode are displayed in the
upper right of the screen.
XXFrames displayed around any detected
subjects indicate that they are in focus.
3 Compose the shot.
zzTo zoom in and enlarge the subject, move
the zoom lever toward <i> (telephoto),
and to zoom away from the subject, move
it toward <j> (wide angle).
24
Trying the Camera Out
4 Shoot.
Shooting Still Images
Focus.
zzPress the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
zzIf [Raise the flash] appears on the screen,
move the < > switch to raise the flash.
It will fire wen shooting. If you prefer not
to he flah, push it down with your
geinto the camera.
oot.
zzPress the shutter button all the way
down.
XXAs the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
zzKeep the camera still until the shutter
sound ends.
XXYour shot is only displayed until the
camera is ready to shoot again.
25
Trying the Camera Out
Shooting Movies
Start shooting.
zzPress the movie button. The camera
beeps once as recording begins, and
[
Rec] is displayed with the elapsed time.
Elapsed Time
XXBlack bars displayed on the top and
bottom edges of the screen indicate
image areas not recorded.
XXFrames displayed around any detected
faces indicate that they are in focus.
zzOnce recording begins, you can take your
finger off the movie button.
Finish shooting.
zzPress the move button again to stop
shootinThe amera beeps twice as
recorditops.
26
Trying the Camera Out
Viewing
After shooting images or movies, you can view them on the screen as
follows.
1 Enter Playback mode.
zzPress the <1> button.
XXYour last shot is displayed.
2 Browse through your images.
zzTo view the previous image, press
the <q> button or turn the <7> dial
counterclockwise. To view the next
image, press the <r> button or turn the
<7> dial cockwise.
zzPreand old the <q><r> buttons to
brothrough images quickly.
zzTo access Scroll Display mode, turn the
<7> dial rapidly. In this mode, turn the
<7> dial to browse through images.
zzTo return to single-image display, press
the <m> button.
zzMovies are identified by a [
] icon. To
play movies, go to step 3.
27
Trying the Camera Out
3 Play movies.
zzPress the <m> button to access the
movie control panel, choose [ ] (either
press the <q><r> buttons or turn the
<7> dial), and then press the <m>
button again.
XXPlayback now begins, and after the movie
Volume
is finished, [
] is displayed.
zzTo adjust the volume, press the <o><p>
buttons.
• To switch to Shooting mode from Playback mode, press the shutter button
halfway.
28
Trying the Camera Out
Erasing the Images
You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered.
1 Choose an image to erase.
zzPress the <q><r> buttons or turn the
<7> dial to choose an image.
2 Erase the image.
zzPress the <a> button.
zzAfter [Erase?] is displayed, press the
<q><r> buttons or turn the <7> dial to
choose [Erase], and then press the <m>
button.
XXThe current image is now erased.
zzTo cancel easure, press the <q><r>
butor trn the <7> dial to choose
[Cal], and then press the <m>
ton.
29
Included Software, PDF Manuals
The software and PDF manuals on the included DIGITAL CAMERA Solution
installation, and saving images to a computer.
Software
After installing the software on the CD-ROM, you can do the following
things on your computer.
CameraWindow
zzImport images and change camera settings
ImageBrowser EX
zzManage images: view, search, and organize
zzPrint and edit images
Digital Photo Professional
zzBrowse, process and edit RAW images
Auto Update Function
Using the included software, you can updo the latest version, and
download new functions via the In(sme software excluded). Be sure
to install the software on a computan Internet connection so you can
use this function.
• Internet access is required to use this function, and any ISP
account charges and access fees must be paid separately.
PDF Manuals
Camera User Guide
zzRefer to this guide for a more in-depth understanding of camera
operation.
Software Guide
zzRefer to this guide when using the included software. The guide can be
accessed from the help system of included software (some software
excluded).
30
Included Software, PDF Manuals
System Requirements
The included software can be used on the following computers. Adobe
Reader is required to view the PDF manuals.
Windows
Macintosh
Operating
System
Windows 7 SP1
Windows Vista SP2
Windows XP SP3
Mac OS X 10.6 – 10.7
Computers running one of the above operating systems
(preinstalled), with an included USB port and Internet connection*
Computer
Processor
Still images
Still images
1.6 GHz or higher
Movies
Core Duo 1.83 GHz or higher
Movies
Core 2 Duo 2.6 GHz or higher
Core 2 Duo 2.6 GHz or higher
Still images
Windows 7 (64 bit):
2 GB or more
Windows 7 (32 bit), Vista, XP:
1 GB or more
Still images
Mac OS X 10.7: 2 GB or more
Mac OS X 10.6: 1 GB or more
Movies
RAM
Movies
2 GB or more
2 GB or more
Interfaces
USB
Free Hard Disk
Space
640 MB or moe*
1024 x 768 resolution or higher
750 MB or more
Display
* Silverlight 4 or later (max. 100 MB) must be installed, and in Windows XP, Microsoft
.NET Framework 3.0 or later (max. 500 MB) must be installed. Installation may take
some time, depending on computer performance.
• Check the Canon website for the latest system requirements, including
supported OS versions.
31
Included Software, PDF Manuals
Installing the Software
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.
Using the software auto update function, you can update to the latest
version and download new functions via the Internet (some software
excluded), so be sure to install the software on a computer with an Internet
connection.
What you will need:
zzComputer
zzUSB cable (camera end: Mini-B)
1 Insert the CD-ROM in the
computer’s CD-ROM drive.
zzInsert the included CD-ROM (DIGITAL
compuCD-ROM drive.
zMaintosh computer, after inserting
tc, double-click the desktop disc
con to open it, and then double-click the
[
] icon displayed.
2 Begin the installation.
zzClick [Easy Installation] and follow the
on-screen instructions to complete the
installation process.
32
Included Software, PDF Manuals
3 When a message is displayed
prompting you to connect
the camera, connect it to a
computer.
zzWith the camera turned off, open the
cover ( ). With the smaller plug of the
USB cable in the orientation shown,
insert the plug fully into the camera
terminal ( ).
zzInshe lager plug of the USB cable
in tomputer’s USB port. For details
out USB connections on the computer,
er to the computer user manual.
33
Included Software, PDF Manuals
4 Install the files.
zzTurn the camera on, and follow the
on-screen instructions to complete the
installation process.
XXThe software will connect to the Internet
to update to the latest version and
download new functions. Installation may
take some time, depending on computer
performance and the Internet connection.
zzClick [Finish] or [Restart] on the screen
after installation and remove the
CD-ROM when the desktop is displayed.
zzTurn the camera off and disconnect the
cable.
• When not connected to the Internet, there are following limitations.
- The screen in step 3 will not be disp.
- Some functions may not be ined.
• The first time you connect the to he computer, drivers will be
installed, so it may taka few muntil camera images are accessible.
• If you have several camras tat were bundled with ImageBrowser EX on
the included CD-ROMs, be sure to use each camera with their included
CD-ROM and follow the on-screen installation instructions for each. Doing
so will ensure that each camera will receive the correct updates and new
functions via the auto update function.
34
Included Software, PDF Manuals
Saving Images to a Computer
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.
1 Connect the camera to the
computer.
camera to a computer.
2 Turn the camera on to access
CameraWindow.
zzPress the <1> button to turn the camera
on.
zzOn a Macintosh computer,
CameraWindow is displayed when a
connection s established between the
camera acomputer.
zzFor dowsfollow the steps introduced
ow
he screen that displays, click the [
]
link to modify the program.
zzChoose [Downloads Images From Canon
Camera using Canon CameraWindow]
and then click [OK].
zzDouble click [
].
35
Included Software, PDF Manuals
CameraWindow
3 Save the images to the
computer.
zzClick [Import Images from Camera], and
then click [Import Untransferred Images].
XXImages are now saved to the Pictures
folder on the computer, in separate
folders named by date.
zzAfter images are saved, close
CameraWindow, press the <1> button
to turn the camera off, and unplug the
cable.
zzFor instructions on viewing images on
a computer, refer to the Software Guide
36
Included Software, PDF Manuals
• In Windows 7, if the screen in step 2 is not displayed, click the [ ] icon in
the taskbar.
• To start CameraWindow in Windows Vista or XP, click [Downloads Images
From Canon Camera using Canon CameraWindow] on the screen displayed
when you turn the camera on in step 2. If CameraWindow is not displayed,
click the [Start] menu and choose [All Programs] X [Canon Utilities] X
[CameraWindow] X [CameraWindow].
• On a Macintosh computer, if CameraWindow is not displayed after step 2,
click the [CameraWindow] icon in the Dock (the bar at the bottom of the
desktop).
• Although you can save images to a computer simply by connecting your
camera to the computer without using the included software, the following
limitations apply.
- It may take a few minutes after you connect the camera to the computer
until camera images are accessible.
- Images shot in vertical orientation may bsaved in horizontal orientation.
- RAW images (or JPEG images recordeith RAW images) may not be
saved.
- Image protection settings be eared from images saved to a
computer.
- Some problems may occusaving images or image information,
depending on the perang system version, the software in use, or image
file sizes.
- Some functions provided by the included software may not be available,
such as editing movies or returning images to the camera.
Using the PDF Manuals
Camera User Guide
zzAccess this guide by double-clicking the desktop shortcut icon.
Software Guide
zzThe guide can be accessed from the help system of included software
(some software excluded).
• It may not be possible to install the PDF manuals on computers that do
manuals on a computer that supports Adobe Reader by copying the PDF
files in the Readme folder on the CD-ROM directly to a convenient location
on the computer.
37
Accessories
Included Accessories
Battery Pack
Battery Charger
DIGITAL
CAMERA
NB-10L*1
CB-2LC/CB-2LCE*1
Neck Strap
NS-DC11
(with terminal cover)
Solution Disk
Memory Card
Card Reader
Windows/
Macintosh
Computer
Power
USB Cable (camera endMini-B)*2
Cs
AC Adapter Kit
ACK-DC80
Hble HTC-100
TV/Video
System
Stereo AV Cable AVC-DC400ST
*1Also available for purchase separately.
*2A genuine Canon accessory is also available (Interface Cable IFC-400PCU).
*3High-Power Flash HF-DC1 also supported.
*4These accessories are also supported: Speedlite 580EX, 430EX, 270EX, and
220EX, Speedlite Transmitter ST-E2, Speedlite Bracket SB-E2, and Off-Camera
Shoe Cord OC-E3.
*5Requires Bracket BKT-DC1 and Off-Camera Shoe Cord OC-E3.
*6Requires Conversion Lens Adapter LA-DC58L.
*7Requires Filter Adapter FA-DC58D.
38
Accessories
Flash Units
Speedlite*4
600EX-RT, 600EX,
580EX II, 430EX II,
320EX, 270EX II
High-Power Flash
HF-DC2*3
Macro Twin Lite
MT-24EX*5*6
Macro Ring Lite
MR-14EX*6
Case
Soft Case
SC-DC85
Waterproof Case
WP-DC48
Lens Accessories
Canon-brand Lens Filte
(58 mm dia.)*
Tele-converter
TC-DC58E*6
Cnon Picge-Compatible Printers
Other Accessories
Remote Switch RS-60E3
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories.
Canon shall not be liable for any damage to this product and/or accidents such as fire,
etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage
and/or explosion of a battery pack). Please note that this warranty does not apply to
repairs arising out of the malfunction of non-genuine Canon accessories, although you
may request such repairs on a chargeable basis.
39
40
On/Off
Shooting Mode
zzPress the power button to turn the
camera on and prepare for shooting.
zzTo turn the camera off, press the power
button again.
Playback Mode
zzPress the <1> button to turn the camera
on and view your shots.
zzTo turn the camera off, press the <1>
button again.
• To switch to Playback mode from Shooting mode, press the <1> button.
• To switch to Shooting mode from Playback mode, press the shutter button
• The lens will be retracted after about one minue once the camera is in
Playback mode. You can turn the camera owen the lens is retracted by
pressing the <1> button.
Power-Saving Featu(Auto Power Down)
As a way to conserve batterpower, te camera automatically deactivates
the screen (Display Off) and ten urns itself off after a specific period of
inactivity.
Power Saving in Shooting Mode
The screen is automatically deactivated after about one minute of inactivity.
In about two more minutes, the lens is retracted and the camera turns itself
off. To activate the screen and prepare for shooting when the screen is off
Power Saving in Playback Mode
The camera turns itself off automatically after about five minutes of
inactivity.
• Adjust the timing of automatic camera and screen deactivation as needed
• Power saving is not active while the camera is connected to a computer
42
Shutter Button
To ensure your shots are in focus, always press the shutter button lightly
(halfway) initially. Once the subject is in focus, press the button all the way
down to shoot.
In this manual, shutter button operations are described as pressing the
button halfway or all the way down.
1 Press halfway. (Press lightly to
focus.)
zzPress the shutter button halfway. The
camera beeps twice, and AF frames are
displayed around image areas in focus.
2 Press all the way down. (From
the halfway position, press fully
to shoot.)
XXThe cameshoots, as a shutter sound
is d.
eep the camera still until the shutter
nd ends.
• Images may be out of focus if you shoot without initially pressing
the shutter button halfway.
• Length of shutter sound playback varies depending on the time
required for the shot. It may take longer in some shooting scenes,
and images will be blurry if you move the camera (or the subject
moves) before the shutter sound ends.
43
Optical Viewfinder
To conserve battery power when shooting, you can use the optical
viewfinder instead of the screen. Shoot the same way as when using the
screen.
1 Deactivate the screen.
zzPress the <p> button to turn the screen
2 Adjust the diopter.
zzAs you look through the optical
viewfinder, turn the dial one way or the
other so that images look sharp.
• The area visible in the optical viewfinder may differ slightly from
the image area in your shots.
• At aspect ratios other than 4:3, the area isible in the optical
viewfinder differs from the image aea in our shots. Check the
settings before shooting.
• The lens may be partialy vsiblgh the optical viewfinder at some zoom
positions.
• Although the camera autmacally focuses on subjects, face detection and
focusing is not possible.
• Continuous shooting is not supported in <A> mode, because the camera
will not determine the shooting scene.
44
Shooting Modes
Use the mode dial to access each shooting mode.
P, Tv, Av, M, C1,
and C2 Modes
Take a variety of
shots using your
preferred settings
Auto Mode
Fully automatic shooting, with
camera-determined settings
Movie Digest Mode
You can make a short movie
of a day just by shooting still
Special Scene Mode
Shoot with optimal settings for
Movie Mode
For shooting movies
You can also shoot
movies when the
mode dial is not
set to Movie mode,
simply by pressing
the movie button.
Creative Filters Mode
Add a variety of effects to images
45
Shooting Display Options
Press the <p> button to view other information on the screen, or to hide
Display 1
Display 2
Display Off
• Even if the screen is off, it will turn on when you start shooting a
movie.
• Screen brightness is automatically increased by the night display function
when you are shooting under low light, making it easier to check how shots
are composed. However, on-screen image brightness may not match the
brightness of your shots. Note that any on-sren image distortion or jerky
subject motion will not affect recorded ges.
46
FUNC. Menu
Configure commonly used shooting functions through the FUNC. menu as
follows.
Note that menu items and options vary depending on the shooting mode
1 Access the FUNC. menu.
zzPress the <m> button.
2 Choose a menu item.
zzPress the <o><p> buttons to choose a
menu item.
XXAvailable options are shown at the bottom
of the screen.
Options
Menu Items
3 Choose an option.
zzPress the <q><r> buttons or turn the
<7> dial to choose an option.
zzOptions labeled with a [
] icon can be
configured by pressing the <n>
button.
4 Finish the setup process.
zzPress the <m> button.
XXThe screen before you pressed the
<m> button in step 1 is displayed again,
showing the option you configured.
• To undo any accidental setting changes, you can restore the camera’s
47
MENU Menu
Configure a variety of camera functions through other menus as follows.
Menu items are grouped by purpose on tabs, such as shooting [4],
playback [1], and so on. Note that available settings vary depending on
1 Access the menu.
zzPress the <n> button.
2 Choose a tab.
zzMove the zoom lever to choose a tab.
zzAfter you have pressed the <o><p>
buttons or turned the <7> dial to choose
a tab initially, you can switch between
tabs by pressig the <q><r> buttons.
You can also oose a tab by pressing
the <+utton
3 Choose a setting.
zzPress the <o><p> buttons or turn the
<7> dial to choose a setting.
zzTo choose settings with options not
shown, first press the <m> or <r>
button to switch screens, and then either
press the <o><p> buttons or turn the
<7> dial to select the setting.
zzTo return to the previous screen, press
the <n> button.
48
MENU Menu
4 Choose an option.
zzPress the <q><r> buttons to choose an
option.
5 Finish the setup process.
zzPress the <n> button to return to the
screen displayed before you pressed the
<n> button in step 1.
• To undo any accidental setting changes, you can restore the camera’s
49
Indicator Display
or blink depending on the camera status.
Indicator
Status
Indicator
Color
Camera Status
On
Camera on
Power Lamp
Green
Blinking Low battery
On
Ready to shoot (when the flash is deactivated)
Recording/reading/transmitting images
Green
Indicator
On
Ready to shoot (when the flash is activated)
Orange
Blinking
• When the indicator blinks green, never turn the camera off, open
the memory card/battery cover, or shake or jolt the camera, which
may corrupt images or damage the cama or memory card.
50
Clock
You can check the current time.
zzPress and hold the <m> button.
XXThe current time appears.
zzIf you hold the camera vertically while
using the clock function, it will switch
to vertical display. Press the <q><r>
buttons or turn the <7> dial to change
the display color.
zzPress the <m> button again to cancel
the clock display.
• When the camera is off, press and hold the <m> button, then press the
power button to display the clock.
51
52
Still Images
Movies
Shooting (Smart Auto)
For fully automatic selection at optimal settings for specific scenes, simply
let the camera determine the subject and shooting conditions.
1 Turn the camera on.
zzPress the power button.
XXThe startup screen is displayed.
2 Enter <A> mode.
zzSet the mode dial to <A>.
zzAim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
XXIcons representing the scene and image
stabilization mde are displayed in the
XXFrameplayed around any detected
ts ndicate that they are in focus.
3 Compose the shot.
zzTo zoom in and enlarge the subject, move
the zoom lever toward <i> (telephoto),
and to zoom away from the subject, move
it toward <j> (wide angle). (A zoom bar
showing the zoom position is displayed.)
Zoom Bar
Focus Range (approx.)
54
Shooting (Smart Auto)
4 Shoot.
Shooting Still Images
Focus.
zzPress the shutter button halfway. The
camera beeps twice after focusing, and
AF frames are displayed to indicate
image areas in focus.
XXSeveral AF frames are displayed when
multiple areas are in focus.
zzIf [Raise the flash] appears on the screen,
move the < > switch to raise the flash.
It will fire wen shooting. If you prefer not
to he flah, push it down with your
geinto the camera.
ot.
zzPress the shutter button all the way
down.
XXAs the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
zzKeep the camera still until the shutter
sound ends.
XXYour shot is only displayed until the
camera is ready to shoot again.
55
Shooting (Smart Auto)
Shooting Movies
Start shooting.
zzPress the movie button. The camera
beeps once as recording begins, and
[
Rec] is displayed with the elapsed
Elapsed Time
time.
XXBlack bars displayed on the top and
bottom edges of the screen indicate
image areas not recorded.
XXFrames displayed around any detected
faces indicate that they are in focus.
zzOnce recording begins, you can take your
finger off the movie button.
Resize the subject and
recompose e shot as needed.
zzTo resie suject, do the same thing
er, note that the sound of camera
operations will be recorded.
zzWhen you recompose shots, the
focus, brightness, and colors will be
automatically adjusted.
Finish shooting.
zzPress the movie button again to stop
shooting. The camera beeps twice as
recording stops.
zzRecording will stop automatically when
the memory card becomes full.
56
Shooting (Smart Auto)
Still Images/Movies
• To activate the screen when the camera is on but the screen is
blank, press the <p> button.
• To restore camera sound if you have accidentally deactivated it (by
holding the <p> button down while turning the camera on), press
the <n> button and choose [Mute] on the [3] tab, and then
press the <q><r> buttons to choose [Off].
Still Images
• A flashing [ ] icon warns that images are more likely to be blurred
by camera shake. In this case, mount the camera on a tripod or
take other measures to keep it still.
• If your shots are dark despite the flash firing, move closer to
the subject. For details on the flash range, see “Specifications”
• The subject may be too close camera only beeps once when
you press the shutter bun hway. For details on the focusing
• To reduce red-ee and tist in focusing, the lamp may be
activated when sooting in low-light conditions.
• A blinking [h] icon displayed when you attempt to shoot indicates
that shooting is not possible until the flash has finished recharging.
Shooting can resume as soon as the flash is ready, so either press
the shutter button all the way down and wait, or release it and
press it again.
• The shutter sound will not be played when the Sleeping and
• The flash firing during shots indicates that the camera has automatically
attempted to ensure optimal colors in the main subject and background
(Multi-area White Balance).
57
Shooting (Smart Auto)
Movies
• Keep your fingers away from the
microphone while shooting movies.
Blocking the microphone may prevent
audio from being recorded or may
cause the recording to sound muffled.
Microphone
• Avoid touching camera controls other than the movie button when
shooting movies, because sounds made by the camera will be
recorded.
• To correct suboptimal image color that may occur in [ ] movie
button to stop recording, and then press it again to resume
recording.
• Audio is recorded in stereo.
58
Shooting (Smart Auto)
Movies
Still Images
Scene Icons
In <A> mode, shooting scenes determined by the camera are indicated
by the icon displayed, and corresponding settings are automatically
selected for optimal focusing, subject brightness, and color. Depending on
Background
Normal Backlit
Dark*
Sunsets Spotlights
Subject
People
–
In Motion
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Shadows on Face
Smiling
–
Sleeping
Babies
Smiling
Sleeping
Children (In Motion)
Other Subjects
In Motion
–
–
–
–
–
At Close Range
* Tripod Used
The background color of icons is light blue when the background is a blue sky,
dark blue when the background is dark, and gray for all other backgrounds.
The background color of icons is light blue when the background is a blue sky,
and gray for all other backgrounds.
• The background color of [ ], [ ], [ ], [ ], and [ ] is dark blue, and the
background color of [ ] is orange.
• When shooting movies, only People, Other Subjects, and At Close Range icons will
be displayed.
• When shooting with the self-timer, People (In Motion), Smiling, Sleeping, Babies
(Smiling), Babies (Sleeping), Children, Other Subjects (In Motion) icons will not be
displayed.
59
Shooting (Smart Auto)
(Smiling), Babies (Sleeping), and Children icons will not be displayed.
• If the flash is set to [ ], the Backlit icons for Smiling and Children will not be
displayed.
• Babies, Babies (Smiling), Babies (Sleeping), and Children icons will be displayed
when [Face ID] is set to [On], and the face of a registered baby (under two years old)
match actual shooting conditions, or if it is not possible to shoot
with your expected effect, color, or brightness.
Continuous Shooting Scenes
If you shoot a still image when the following scene icons are displayed,
the camera will shoot continuously. If you press te shutter button halfway
when one of the icons in the table below is displed, one of the following
icons will be displayed to inform you that amea will shoot continuous
images: [ ], [ ], or [W].
:
Consimages are captured, and the camera
analyzes details such as facial expressions to save
he mage determined to be the best.
Smiling (including Babies)
Sleeping (including Babies)
Children
:
Beautiful shots of sleeping faces, created by
combining consecutive shots to reduce camera
shake and image noise.
The AF assist beam will not light up, the flash will
not fire, and the shutter sound will not be played.
W: So you don’t miss a photo opportunity of children
who move around, the camera will capture three
consecutive images for each shot.
• In some scenes, expected images may not be saved, and images
may not look as expected.
• Focus, image brightness, and color are determined by the first
shot.
• When you want to shoot single images only, press the <m> button, choose
[
] in the menu, and then choose [ ].
60
Shooting (Smart Auto)
Movies
Still Images
Image Stabilization Icons
Optimal image stabilization for the shooting conditions is automatically
applied (Intelligent IS). Additionally, the following icons are displayed in
<A> mode.
Image stabilization for movies,
Image stabilization for still
images
reducing strong camera shake,
as when shooting while walking
(Dynamic IS)
Image stabilization for slow
camera shake, such as when
shooting movies at telephoto
(Powered IS)
Image stabilization for still
images, when panning*
No image stabilization, because
the camera is mounted on
a tripod or held still by other
means
Image stabilization for macro
shots (Hybrid IS)
* Displayed when you pan, following movinjects ith the camera. When you follow
subjects moving horizontally, imagbilizion only counteracts vertical camera
shake, and horizontal stabilization Simlarly, when you follow subjects moving
vertically, image stabilizatioonly cacts horizontal camera shake.
an IS icon is not displayed.
61
Shooting (Smart Auto)
Still Images
Movies
On-Screen Frames
A variety of frames are displayed once the camera detects subjects you are
aiming the camera at.
•
A white frame is displayed around the subject (or person’s face)
determined by the camera to be the main subject, and gray frames are
displayed around other detected faces. Frames follow moving subjects
within a certain range to keep them in focus.
However, if the camera detects subject movement, only the white frame
will remain on the screen.
•
When you are pressing the shutter button halfway and the camera
detects subject movement, a blue frame is displayed, and the focus and
image brightness are constantly adjusted (Servo AF).
frames are not displayed around desired subjects, or if frames are
displayed on the background or slar aas.
62
Common, Convenient Features
Still Images
Movies
Zooming In Closer on Subjects (Digital Zoom)
When distant subjects are too far away to enlarge using the optical zoom,
use digital zoom for up to about 20x enlargement.
1 Move the zoom lever toward
<i>.
zzHold the lever until zooming stops.
XXZooming stops at the largest possible
zoom factor (before the image becomes
noticeably grainy), which is then indicated
on the screen.
Zoom Factor
2 Move the zoom lever toward
<i> again.
XXThe camerzooms in even closer on the
su
• Moving the zoom lever will display the zoom bar (which indicates
the zoom position). The color of the zoom bar will change
depending on the zoom range.
- White range: optical zoom range where the image will not appear
grainy.
- Yellow range: digital zoom range where the image is not
noticeably grainy (ZoomPlus).
- Blue range: digital zoom range where the image will appear
grainy.
Because the blue range will not be available at some resolution
following step 1.
63
Common, Convenient Features
• Focal length when optical and digital zoom are combined is as follows
(35mm film equivalent).
28 – 560 mm (28 – 140 mm with optical zoom alone)
• To deactivate digital zoom, press the <n> button, choose [Digital Zoom]
on the [4] tab, and then choose [Off].
Still Images
Movies
Using the Self-Timer
With the self-timer, you can include yourself in group photos or other timed
shots. The camera will shoot about 10 seconds after you press the shutter
button.
1 Configure the setting.
zzPress the <m> button, choose [ ] in
the menu, and hen choose the []] option
XXOnce tetting is complete, []] is
yed.
2 Shoot.
zzFor Still Images: Press the shutter button
halfway to focus on the subject, and then
press it all the way down.
zzFor Movies: Press the movie button.
64
Common, Convenient Features
XXOnce you start the self-timer, the lamp
will blink and the camera will play a self-
timer sound.
XXTwo seconds before the shot, the blinking
and sound will speed up. (The lamp will
remain lit in case the flash fires.)
zzTo cancel shooting after you have
triggered the self-timer, press the
<n> button.
zzTo restore the original setting, choose [
]
in step 1.
Still Images
Movies
Using the Self-Timer to Avoid Camera Shake
This option delays shutter release until about wo seconds after you have
pressed the shutter button. If the camera is usteady while you are pressing
the shutter button, it will not affect yoot.
Cgure the setting.
[[].
XXOnce the setting is complete, [[] is
displayed.
65
Common, Convenient Features
Still Images
Movies
Customizing the Self-Timer
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
1 Choose [$].
and press the <n> button.
2 Configure the setting.
zzTurn the <z> dial to set the delay.
Press the <q><r> buttons or turn the
<7> dial to specify the number of shots,
and then press the <m> button.
XXOnce the setting is complete, [$] is
displayed.
• For movies shot using the self-timer, the delay represents the
delay before recording begins, but the setting for the number of
shots has no effect.
• When you specify multiple shots, image brightness and white balance are
determined by the first shot. More time is required between shots when the
flash fires or when you have specified to take many shots. Shooting will stop
automatically when the memory card becomes full.
• When a delay longer than two seconds is specified, two seconds before the
shot, the lamp blinking and self-timer sound will speed up. (The lamp will
remain lit in case the flash fires.)
66
Common, Convenient Features
Still Images
Adding a Date Stamp
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so confirm
1 Configure the setting.
zzPress the <n> button, choose [Date
Stamp] on the [4] tab, and then choose
XXOnce the setting is complete, [DATE] is
displayed.
2 oot.
Xs you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
zzTo restore the original setting, choose
[Off] in step 1.
• Date stamps cannot be edited or removed.
• Shots taken without adding a date stamp can be printed with one as follows.
However, adding a date stamp this way to images that already have one may
cause it to be printed twice.
- Use the included software to print
67
Common, Convenient Features
Still Images
Choosing Subjects to Focus On (Tracking AF)
Shoot after choosing a subject to focus on as follows.
1 Specify Tracking AF.
zzPress the <o> button.
XX[ ] is displayed in the center of the
screen.
2 Choose a subject to focus on.
zzAim the camera so that [ ] is on the
desired subject, and then press the
shutter button halfway.
XXA blue frame is displayed, and the
camera will kep the subject in focus and
image bghtnes adjusted (Servo AF).
3 Soot
zzhe shutter button all the way down
to soot.
zzPress the <o> button to cancel Tracking
AF.
• Tracking may not be possible when subjects are too small or move too
rapidly, or when subject color or brightness matches that of the background
too closely.
68
Using Face ID
If you register a person ahead of time, the camera will detect that person’s
face, and prioritize focus, brightness, and color for that person when
shooting. In <A> mode, the camera can detect babies and children
based on registered birthdays and optimize settings for them when
shooting.
This function is also useful when searching for a specific registered person
Personal Information
•
•
Information such as images of a face (face info) registered with Face ID,
and personal information (name, birthday) will be saved on the camera.
Additionally, when registered people are detected, their names will be
recorded in still images. When using the Face ID function, be careful
when sharing the camera or images with others, and when posting
images online where many others can view them.
When disposing of a camera or transferring it to another person after
using Face ID, be sure to erase all informaion (registered faces, names,
Registering Face ID Inrmation
You can register information (fa, name, birthday) for up to 12 people
to use with Face ID.
1 Access the setting screen.
zzPress the <n> button, choose [Face
ID Settings] on the [4] tab, and then
69
Using Face ID
zzPress the <o><p> buttons or turn the
<7> dial to choose [Add to Registry],
and then choose [Add a New Face].
2 Register face information.
zzAim the cameso that the face of the
persowanto register is inside the
gfrae at the center of the screen.
ze frame on the person’s face
intes that the face is recognized.
Make sure a white frame is displayed on
the face, and then shoot.
zzIf the face is not recognized, you cannot
register face information.
3 Save the settings.
zzAfter [Register?] is displayed, press the
<q><r> buttons or turn the <7> dial to
choose [OK], and then press the <m>
button.
70
Using Face ID
XXThe [Edit Profile] screen is displayed.
4 Enter a name.
zzPress the <m> button.
zzPress the <o><p><q><r> buttons or
turn the <7> dial to choose a character,
and then press the <m> button to enter
it.
zzUp to 10 characters can be used.
zzTo move thcursor, choose [ ] or [
and press e <m> button, or turn the
<zial.
]
deete the previous character, either
ss the <a> button or choose [ ] and
press the <m> button.
zzPress the <n> button to return to the
edit profile screen.
5 Enter a birthday.
zzPress the <o><p> buttons or turn the
<7> dial to choose [Birthday], and then
press the <m> button.
zzPress the <q><r> buttons to choose a
setting.
zzPress the <o><p> buttons or turn the
<7> dial to specify the date.
zzWhen finished, press the <m> button.
71
Using Face ID
6 Save the settings.
zzPress the <o><p> buttons or turn the
<7> dial to choose [Save], and then
press the <m> button.
zzAfter a message is displayed, press the
<q><r> buttons or turn the <7> dial to
choose [Yes], and then press the <m>
button.
7 Continue registering face
information.
zzTo register up to 4 more points of face
information (expressions or angles),
repeat steps 2 – 3.
zzRegistered faces are more easily
recognized if you add a variety of face
information. Iddition to a head-on
angle, a slight side angle, a shot
smling, and shots inside and
.
• The flash will not fire when following step 2.
• If you do not register a birthday in step 5, Babies or Children icons
• You can overwrite registered face info, and add face info later if you have not
72
Using Face ID
Shooting
If you register a person ahead of time, the camera will prioritize that person
as the main subject, and optimize focus, brightness, and color for that
person when shooting.
XXWhen you point the camera toward a
subject, the names of up to 3 registered
people will be displayed when they are
detected.
zzShoot.
XXDisplayed names will be recorded in still
images. Even if people are detected, but
their names are not displayed, the names
(up to 5 people) will be recorded in the
image.
• People other than those regid mabe mistakenly detected as
the registered person if shre similar facial features.
• Registered people may not brrectly detected if the captured image or
scene differs drasticlly frm the registered face information.
• If a registered face is not detected, or not easily detected, overwrite
registered information with new face info. Registering face info right before
shooting will allow for easier detection of registered faces.
• If a person is mistakenly detected as another person and you continue
shooting, you can edit or erase the name recorded in the image during
• Because faces of babies and children change quickly as they grow, you
will be recorded in the image.
• If you don’t want names to be recorded in still images, choose [Face ID
Settings] on the [4] tab, choose [Face ID], and then choose [Off].
• You can check names recorded in images in the playback screen (simple
73
Using Face ID
Checking and Editing Registered Information
Checking Registered Face ID Information
1 Access the [Check/Edit Info]
screen.
[Check/Edit Info] and press the <m>
button.
2 Choose a person to check.
zzPress the <o><p><q><r> buttons or
turn the <7> dial to choose a person,
and then press the <m> button.
3 k he registered
imation.
zzPress the <o><p> buttons or turn the
<7> dial to choose an item, and then
press the <m> button.
zzCheck the registered information.
74
Using Face ID
Changing the Name or Birthday
1 Access the [Edit Profile] screen.
[Edit Profile] and press the <m> button.
2 Input changes.
zzPress the <o><p> buttons or turn the
<7> dial to choose an item, and follow
• Even if you change names in [Edit Profile], the names recorded in
previously shot images will remain the same.
• You can use the included softwardit reistered names. Some
characters entered with the includftware may not display on the
camera, but will be correcrdein images.
75
Using Face ID
Overwriting and Adding Face Information
You can overwrite existing face information with new face info. You should
update face information regularly, especially with babies and children, as
their faces change quickly as they grow.
You can also add face information when all 5 face info slots have not been
filled.
1 Access the [Add Face Info]
screen.
choose [Add Face Info] and press the
<m> button.
2 Choose the name of the person
to overwrit.
zzPress o>p><q><r> buttons or
he 7> dial to choose the name of
on to overwrite, and then press the
<mbutton.
zzf 4 or less face information slots are
add more face info.
3 Access the face info screen.
zzRead the message that displays, press
the <q><r> buttons or turn the <7> dial
to choose [OK], and then press the <m>
button.
XXThe face info screen is displayed.
76
Using Face ID
4 Choose the face info to
overwrite.
zzPress the <o><p><q><r> buttons or
turn the <7> dial to choose the face info
to overwrite, and then press the <m>
button.
5 Register face information.
shoot, and then register the new face
information.
zzRegistered faces are more easily
recognized if you add a variety of face
information. In addition to a head-on
angle, add a slight side angle, a shot
when smilig, and shots inside and
ou
• You cannot add face inormall 5 information slots are filled. Follow the
steps above to ovewrite face iformation.
• You can follow the abve teps to register new face info when there is at
least one slot open, however you cannot overwrite any face information.
77
Using Face ID
Erasing Face Information
1 Access the [Check/Edit Info]
screen.
[Check/Edit Info] and press the <m>
button.
2 Choose the name of the person
whose face info you want to
erase.
zzPress the <o><p><q><r> buttons or
turn the <7> dial to choose the name of
the person whose face info you want to
erase, and hepress the <m> button.
3 Accehe [Face Info List]
en
zzPhe <o><p> buttons or turn the
<7> dial to choose [Face Info List], and
then press the <m> button.
4 Choose the face info to erase.
zzPress the <m> button, press the
<o><p><q><r> buttons or turn the
<7> dial to choose the face info you
want to erase, and then press the <m>
button.
zzAfter [Erase?] is displayed, press the
<q><r> buttons or turn the <7> dial to
choose [OK], and then press the <m>
button.
XXThe selected face info will be erased.
78
Using Face ID
Erasing Registered Information
You can erase information (face info, name, birthday) registered to Face ID.
However, names recorded in previously shot images will not be erased.
1 Access the [Erase Info] screen.
[Erase Info].
2 Choose the name of the person
whose info you want to erase.
zzPress the <o><p><q><r> buttons or
turn the <7> dial to choose the name
of a rson o erase, and then press the
<mutton.
er Erase?] is displayed, press the
><r> buttons or turn the <7> dial to
choose [OK], and then press the <m>
button.
• If you erase a registered person’s info, you will not be able to
79
Image Customization Features
Still Images
Changing the Aspect Ratio
Change the image aspect ratio (ratio of width to height) as follows.
Configure the setting.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
XXOnce the setting is complete, the screen
aspect ratio will be updated.
zzTo restore the original setting, repeat this
process but choose [ ].
Used for display on widescreen HDTVs ilar diplay devices.
Same aspect ratio as 35mm film, or inting images at 5 x 7-inch or
postcard sizes.
Native aspect ratio of the amera screen, also used for display on standard-
definition televisions or simir diplay devices, or for printing images at
3.5 x 5-inch or A-series sizes.
Square aspect ratio.
Aspect ratio commonly used for portraits.
80
Image Customization Features
Still Images
Changing Image Resolution (Size)
Choose from 4 levels of image resolution, as follows. For guidelines on
how many shots at each resolution setting can fit on a memory card, see
Configure the setting.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
XXThe option you configured is now
displayed.
zzTo restore the original setting, repeat this
process but choose [ ].
Guidelines for Choosinesolution Based on Paper
Size (for 4:3 Imags)
A2 (16.5 x 23.4 in.)
zz[ ]: For e-mailing images.
A3 – A5 (11.7 x
16.5 – 5.8 x 8.3 in.)
5 x 7 in.
Postcard
3.5 x 5 in.
81
Image Customization Features
Still Images
Red-Eye Correction
Red-eye that occurs in the flash photography can be automatically
corrected as follows.
1 Access the [Built-in Flash
Settings] screen.
zzPress the <n> button, choose [Flash
Control] on the [4] tab, and then press
2 Cnfire the setting.
zze [Red-Eye Corr.], and then
XXOnce the setting is complete, [R] is
displayed.
zzTo restore the original setting, repeat this
process but choose [Off].
• Red-eye correction may be applied to image areas other than
eyes (if the camera misinterprets red eye makeup as red pupils,
for example).
• You can also access the screen in step 2 by holding down the <r> button for
at least one second.
• You can also access the screen in step 2 when the flash is up by pressing
the <r> button and immediately pressing the <n> button.
82
Image Customization Features
Still Images
Correcting Greenish Image Areas from
Mercury Lamps
In shots of evening scenes with subjects illuminated by mercury lamps, the
subjects or background may appear to have a greenish tinge. This greenish
tinge can be corrected automatically when shooting, using Multi-area White
Balance.
Configure the setting.
zzPress the <n> button, choose [Hg
Lamp Corr.] on the [4] tab, and then
XXOnce the setting is complete, [ ] is
displayed.
zzTo restore he original setting, repeat this
process bchoose [Off].
• After you are finished shooting under mercury lamps, you should
set [Hg Lamp Corr.] back to [Off]. Otherwise, green hues not
caused by mercury lamps may be corrected by mistake.
• Try taking some test shots first to make sure you obtain the desired results.
83
Image Customization Features
Movies
Changing Movie Image Quality
3 image quality settings are available. For guidelines on the maximum
movie length at each level of image quality that will fit on a memory card,
Configure the setting.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
XXThe option you configured is now
displayed.
zzTo restore the original setting, repeat this
process but choose [ ].
Image
Quality
Resolution
1920 x 1080*
Rate
24 fs
Details
For shooting in Full HD
For shooting in HD
1280 x 720
640 x 480
30 fps
30 fps
For shooting in standard
definition
* Fine Detail Movie Processing (This function quickly processes a large amount of
information, making it possible to record even finer details in movies.)
• In [ ] and [ ] modes, black bars displayed on the top and bottom edges
of the screen indicate image areas not recorded.
84
Image Customization Features
Movies
Using the Wind Filter
Distorted audio caused by recording when the wind is strong can be
reduced. However, the recording may sound unnatural when this option is
used when there is no wind.
Configure the setting.
zzPress the <n> button, choose [Wind
Filter] on the [4] tab, and then choose
zzTo restore the original setting, repeat this
process but choose [Off].
85
Helpful Shooting Features
Still Images
Movies
Using the Dual Axis Electronic Level
An electronic level can be displayed as a guideline to ensure the camera is
level from front to back and left to right.
1 Display the electronic level.
zzPress the <p> button several times to
display the electronic level.
2 Straighten the camera.
zzIf the camera is tilted, move it so that the
red line changes to green.
Back or
Forward
Left or Right
• If the electronic level is nt diplayed in step 1, press the <n> button,
and on the [4] tab, choose [Custom Display]. Add a [ ] to [ ] or [ ] to
choose the electronic level.
• The electronic level is not displayed during movie recording.
• If you hold the camera vertically, the orientation of the electronic level will be
updated automatically to match the camera orientation.
• Calibrate the electronic level if it seems ineffective in helping you level the
86
Helpful Shooting Features
Still Images
Magnifying the Area in Focus
You can check the focus by pressing the shutter button halfway, which will
enlarge the portion of the image in focus in the AF frame.
1 Configure the setting.
zzPress the <n> button, choose
[AF-Point Zoom] on the [4] tab, and
2 Chk the focus.
ss the shutter button halfway. The
ce detected as the main subject is now
magnified.
zzTo restore the original setting, choose
[Off] in step 1.
• The area in focus will not be magnified when you press the shutter
button halfway if a face was not detected, if the person is too close
to the camera and their face is too large for the screen, or if the
camera detects subject movement.
87
Helpful Shooting Features
Still Images
Checking for Closed Eyes
] is displayed when the camera detects that people may have closed
[
their eyes.
1 Configure the setting.
zzPress the <n> button, choose [Blink
Detection] on the [4] tab, and then
2 Shoot.
XX[ ] is displayed when the camera
detects a person whose eyes are closed.
zzTo restore the original setting, choose
[Off] in step 1.
• When you have specified multts [$] mode, this function is only
available for the final sot.
• This feature is not availble during continuous shooting in [ ] mode
• A frame is displayed around people whose eyes are closed when you
have selected 2 – 10 seconds in [Review], or if you have selected [Hold]
88
Customizing Camera Operation
Customize shooting functions on the [4] tab of the menu as follows.
Still Images
Deactivating the AF Assist Beam
You can deactivate the lamp that normally lights up to help you focus when
you press the shutter button halfway in low-light conditions.
Configure the setting.
zzPress the <n> button, choose
[AF-assist Beam] on the [4] tab, and
zzTo restore the original setting, repeat this
process but choose [On].
Still Images
Deactivating the Red-e Reduction Lamp
You can deactivate the red-eye ctin lamp that lights up to reduce red-
eye when the flash is used in loshots.
1 Access the [Built-in Flash
Settings] screen.
zzPress the <n> button, choose [Flash
Control] on the [4] tab, and then press
2 Configure the setting.
zzChoose [Red-Eye Lamp], and then
zzTo restore the original setting, repeat this
process but choose [On].
89
Customizing Camera Operation
Still Images
Changing the Image Display Period After
Shots
Change how long images are displayed after shots as follows.
Configure the setting.
zzPress the <n> button, choose
[Review] on the [4] tab, and then
zzTo restore the original setting, repeat this
process but choose [Quick].
Displays images only until you can
shoot again.
Quick
Displays images for the specified
timEven while the shot is
2 – 10 sec. disayed, you can take another
shot y pressing the shutter button
halfway again.
Displays images until you press
the shutter button halfway.
Off
No image display after shots.
90
Customizing Camera Operation
Still Images
Changing the Image Display Style After Shots
Change the way images are displayed after shots as follows.
1 In [Review], choose either 2 – 10
2 Configure the setting.
zzPress the <n> button, choose
[Review Info] on the [4] tab, and then
zzTo restore the original setting, repeat this
process but choose [Off].
Off
Displays only the image.
Displays shooting details
Detailed
Sows the area in the AF frame
magnified, enabling you to check
the focus. Follow the steps in
cu
eck
91
92
Still Images
Movies
Auto Clip Recording (Movie Digest)
You can make a short movie of a day just by shooting still images.
Before each shot, the camera will automatically record a movie clip of the
scene. Each clip recorded that day is combined into a single file.
1 Enter < > mode.
zzSet the mode dial to < >.
2 Shoot.
zzTo shoot a still image, press the shutter
button all the way down.
XXBefore shooting, the camera will
automatically record a clip about 2 – 4
seconds long.
• Clips may not be recorded if you shoot a still image immediately
after turning the camera on, choosing < > mode, or operating the
camera in other ways.
• Battery life is shorter in thide an in <A> mode, because
clips are recorded for each
• Any sounds from camera opetions during movie recording will
be included in the moie.
• Although the clips recorded on a particular day are combined into a single
• Clips are saved as separate movie files in the following cases even if they
were recorded on the same day in < > mode.
- If the movie file size reaches about 4 GB or the total recording time reaches
approx. 29 minutes and 59 seconds
been changed
• Some camera sounds will be muted. Sounds are not played when you press
the shutter button halfway, use camera controls, or trigger the self-timer
94
Specific Scenes
Choose a mode matching the shooting scene, and the camera will
automatically configure the settings for optimal shots.
1 Enter <K> mode.
zzSet the mode dial to <K>.
2 Choose a shooting mode.
zzPress the <m> button, choose [I] in the
menu, and then choose a shooting mode
3 Shoot.
Still Images
Movies
IShot prtraits (Portrait)
zakhots of people with a softening
ct.
Still Images
Shoot evening scenes without
using a tripod (Handheld
NightScene)
zzBeautiful shots of evening scenes or
portraits with evening scenery in the
background, without the need to hold the
camera very still (as with a tripod).
zzA single image is created by combining
consecutive shots, reducing camera
shake and image noise.
95
Specific Scenes
Still Images
Movies
SShoot under water (Underwater)
zzNatural-colored shots of sea life and
underwater scenery, when you use an
zzThis mode can correct white balance and
match the effect of using a commercially
available color-compensating filter
Still Images
Movies
PShoot with snowy backgrounds
(Snow)
zzBright, natural-colored shots of people
against snowy backgrounds.
Still Images
Movies
tot fireworks (Fireworks)
zzVivid shots of fireworks.
• Subjects appear larger in [ ] mode compared to other modes.
• In [ ] and [S] modes, shots may look grainy because the ISO
• Because the camera will shoot continuously in [ ] mode, hold it
steady while shooting.
• In [ ] mode, excessive camera shake or certain shooting
conditions may prevent you from obtaining the desired results.
• In [t] mode, mount the camera on a tripod or take other
measures to keep it still and prevent camera shake. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other
96
Specific Scenes
] mode instead
Still Images
• When you use a tripod for evening scenes, shooting in [
A
Shooting With an Underwater Focusing Range
using a focus range designed for underwater shooting can ensure optimal
underwater shots.
1 Configure the setting.
choose [S].
zzPress the <q> button, choose the desired
focus range (either press the <q><r>
buttons or urn the <7> dial), and then
presthe <m> button.
2 Sht.
Focusing Range
Description
ake close-ups of sea life, using the digital zoom for even
closeshots.
Underwater Macro
Avoid missing unexpected underwater shooting
opportunities when shooting subjects some distance
away. Especially effective for moving subjects.
8Quick
Manual Focus
f
• In [ ] mode, optical zoom is set to maximum wide angle.
• In [ ] mode, use of digital zoom may cause images to appear
• In [8] mode, subjects at close range may not be in focus. In this
case, try setting the focus range to [ ].
97
Specific Scenes
Still Images
Making Skin Look Smoother (Smooth Skin)
You can apply a smoothening effect when shooting images of people.
The effect level and color ([Lighter Skin Tone], [Darker Skin Tone]) can be
chosen as follows.
1 Choose [ ].
choose [ ].
2 Access the setting screen.
zzPress the < > button.
3 Configure the setting.
zzPress the <o><p> buttons to choose
an option. Chose the effect level (either
press q><r> buttons or turn the
<7> di, and then press the <
.
>
XXA iew is shown of how your shot will
ook with the effect applied.
4 Shoot.
• Areas other than people’s skin may be modified.
• Try taking some test shots first to make sure you obtain the
desired results.
• The effect will be stronger for the face of the person detected as the main
subject.
98
Image Effects (Creative Filters)
Add a variety of effects to images when shooting.
1 Enter < > mode.
zzSet the mode dial to < >.
2 Choose a shooting mode.
zzPress the <m> button, choose [ ] in
the menu, and then choose a shooting
3 Shoot.
Still Images
Movies
Shoot ivivid colors (Super
V)
hotin rich, vivid colors.
Still Images
Movies
Posterized shots (Poster Effect)
zzShots that resemble an old poster or
illustration.
• In [ ] and [ ] modes, try taking some test shots first, to make
sure you obtain the desired results.
99
Image Effects (Creative Filters)
Still Images
Shooting High-Contrast Scenes
(High Dynamic Range)
Three consecutive images are captured at different brightness levels
each time you shoot, and the camera combines image areas with optimal
brightness to create a single image. This mode can reduce the washed-out
highlights and loss of detail in shadows that tends to occur in high-contrast
shots.
1 Choose [ ].
choose [ ].
2 Hold the camera still.
zzMount the camera on a tripod or take
other measuto keep it still and
prevemera shake.
3 t.
zzWyou press the shutter button all
he way down, the camera will take three
shots and combine them.
• Any subject movement will cause images to look blurry.
• There will be a delay before you can shoot again, as the camera processes
and combines the images.
100
Image Effects (Creative Filters)
Adding Color Effects
choose [ ].
zzPress the < > button, choose a color
effect (either press the <q><r> buttons
or turn the <7> dial), and then press the
<
> button again.
–
Effect Off
Sepia
Sepia tone shots.
B/W
Black and white shots.
Super Vivid
Poster Effect
Shots in rich, vivid colors.
Shots that resemble an od poster or illustration.
101
Image Effects (Creative Filters)
Still Images
Movies
Shooting with Faded Colors (Nostalgic)
This effect makes colors look faded and images look weathered, as in old
photographs. Choose from five effect levels.
1 Choose [ ].
choose [ ].
2 Choose an effect level.
zzTurn the <z> dial to choose an effect
level.
XXA preview is shown of how your shot will
look with the effect applied.
3 Shoot.
• Try taking some test shots to ake sure you obtain the
desired results.
• Colors will look faded on the shooting screen, but the image aging effect is
• The image aging effect is not shown in movies.
102
Image Effects (Creative Filters)
Still Images
Shooting with a Fish-Eye Lens Effect
(Fish-eye Effect)
Shoot with the distorting effect of a fish-eye lens.
1 Choose [ ].
choose [ ].
2 Choose an effect level.
zzTurn the <z> dial to choose an effect
level.
XXA preview is shown of how your shot will
look with the effect applied.
3 Shoot.
• Try taking some test shrst, o make sure you obtain the
desired results.
103
Image Effects (Creative Filters)
Still Images
Movies
Shots Resembling Miniature Models
(Miniature Effect)
Creates the effect of a miniature model, by blurring image areas above and
below your selected area.
You can also make movies that look like scenes in miniature models by
choosing the playback speed before the movie is recorded. People and
objects in the scene will move quickly during playback. Note that sound is
not recorded.
1 Choose [ ].
choose [ ].
XXA white frame is displayed, indicating the
image area tht will not be blurred.
2 Choothe area to keep in
fus.
zzhe < > button.
zzMove the zoom lever to resize the frame,
and turn the <7> dial to move it.
3 For movies, choose the movie
playback speed.
zzTurn the <z> dial to choose the speed.
4 Return to the shooting screen
and shoot.
zzPress the < > button to return to the
shooting screen, and then shoot.
104
Image Effects (Creative Filters)
Playback Speed and Estimated Playback Time
(for One-Minute Clips)
Speed
Playback Time
Approx. 12 sec.
Approx. 6 sec.
Approx. 3 sec.
• The zoom is not available when shooting movies. Be sure to set
the zoom before shooting.
• Try taking some test shots first, to make sure you obtain the
desired results.
• To switch the orientation of the frame to vertical, press the <q><r> buttons
in step 2. To move the frame, press the <q<r> buttons again. To return the
frame to horizontal orientation, preshe <><p> buttons.
• Holding the camera vertically will e the rientation of the frame.
• Movie image quality is [ asect ratio of [ ] and [ ] at an aspect
105
Image Effects (Creative Filters)
Still Images
Shooting with a Toy Camera Effect
(Toy Camera Effect)
This effect makes images resemble shots from a toy camera by vignetting
(darker, blurred image corners) and changing the overall color.
1 Choose [ ].
choose [ ].
2 Choose a color tone.
zzTurn the <z> dial to choose a color
tone.
XXA preview is shown of how your shot will
look with the efect applied.
3 Shoo
Standard Shots resemble toy camera s.
Warm
Cool
Images have a warer tone twith [Standard].
Images have a cooler one han with [Standard].
• Try taking some test shots first, to make sure you obtain the
desired results.
106
Image Effects (Creative Filters)
Still Images
Shooting With a Soft Focus Effect
This function allows you to shoot images as if a soft focus filter is attached
to the camera. You can adjust the effect level as desired.
1 Choose [ ].
choose [ ].
2 Choose an effect level.
zzTurn the <z> dial to choose an effect
level.
XXA preview is shown of how your shot will
look with the effect applied.
3 Shoot.
• Try taking some test shrsto make sure you obtain the
desired results.
107
Image Effects (Creative Filters)
Still Images
Movies
Shooting in Monochrome
Shoot images in black and white, sepia, or blue and white.
1 Choose [ ].
choose [ ].
2 Choose a color tone.
zzTurn the <z> dial to choose a color
tone.
XXA preview is shown of how your shot will
look with the effect applied.
3 Shoot.
B/W
Black and white shots.
Sepia
Blue
Sepia tone shots.
Blue and white shots.
108
Image Effects (Creative Filters)
Still Images
Movies
Shooting with Color Accent
Choose a single image color to keep and change other colors to black and
white.
1 Choose [T].
choose [T].
2 Access the setting screen.
zzPress the < > button.
XXThe original image and the Color Accent
image are displayed one after another.
XXBy default, green is the color that will be
kept.
3 Speify te color.
zzPosn the center frame over the color
keep, and then press the <q> button.
e specified color is recorded.
4 Specify the range of colors to
keep.
Recorded Color
zzPress the <o><p> buttons or turn the
<7> dial to adjust the range.
zzTo keep only your specified color, choose
a large negative value. To keep colors
similar to your specified color as well,
choose a large positive value.
zzPress the < > button to return to the
shooting screen.
5 Shoot.
• Using the flash in this mode may cause unexpected results.
• In some shooting scenes, images may look grainy and colors may
not look as expected.
109
Image Effects (Creative Filters)
Still Images
Movies
Shooting with Color Swap
You can replace one image color with another before shooting. Note that
only one color can be replaced.
1 Choose [Y].
choose [Y].
2 Access the setting screen.
zzPress the < > button.
XXThe original image and the Color Swap
image are displayed one after another.
XXBy default, green will be replaced with
gray.
3 Speche olor to replace.
zon he center frame over the color
ace, and then press the <q>
button.
XXThe specified color is recorded.
4 Specify the new color.
zzPosition the center frame over the new
color, and then press the <r> button.
XXThe specified color is recorded.
110
Image Effects (Creative Filters)
5 Specify the range of colors to
replace.
zzPress the <o><p> buttons or turn the
<7> dial to adjust the range.
zzTo replace only your specified color,
choose a large negative value. To replace
colors similar to your specified color as
well, choose a large positive value.
zzPress the < > button to return to the
shooting screen.
6 Shoot.
• Using the flash in this mode may cause unexpected results.
• In some shooting scenes, images may look grainy and colors may
not look as expected.
111
Special Modes for Other Purposes
Still Images
Auto Shooting After Face Detection
(Smart Shutter)
Auto Shooting After Smile Detection
The camera shoots automatically after detecting a smile, even without you
pressing the shutter button.
1 Choose [ ].
choose [ ], and then press the <
button.
>
zzPress the <q><r> buttons or turn the
<7> dial to choose [ ], and then press
the < > buttn.
XXThe camera nw enters shooting standby
mode, [Smie Detection on] is
aye.
2 Ahe camera at a person.
zzEach time the camera detects a smile, it
will shoot after the lamp lights up.
zzTo pause smile detection, press the <p>
button. Press the <p> button again to
resume detection.
• Switch to another mode when you finish shooting, or the camera
will continue shooting each time a smile is detected.
• You can also shoot as usual by pressing the shutter button.
• The camera can detect smiles more easily when subjects face the camera
and open their mouth wide enough so that teeth are visible.
• To change the number of shots, press the <o><p> buttons after choosing
[
112
Special Modes for Other Purposes
Still Images
Using the Wink Self-Timer
Aim the camera at a person and press the shutter button all the way down.
The camera will shoot about two seconds after a wink is detected.
1 Choose [ ].
choose [ ], and then press the <
button.
>
zzPress the <q><r> buttons or turn the
<7> dial to choose [ ], and then press
the < > button.
2 Compose the shot and press
the shuter button halfway.
zzMake sure green frame is displayed
arothe fce of the person who will
nk
3 ess the shutter button all the
way down.
XXThe camera now enters shooting standby
mode, and [Wink to take picture] is
displayed.
XXThe lamp blinks and the self-timer sound
is played.
4 Face the camera and wink.
XXThe camera will shoot about two seconds
after detecting a wink by the person
whose face is inside the frame.
zzTo cancel shooting after you have
triggered the self-timer, press the
<n> button.
113
Special Modes for Other Purposes
• If the wink is not detected, wink again slowly and deliberately.
• Winking may not be detected if eyes are obscured by hair, a hat, or glasses.
• Closing and opening both eyes at once will also be detected as a wink.
• If winking is not detected, the camera will shoot about 15 seconds later.
• To change the number of shots, press the <o><p> buttons after choosing
[
• If no one is in the shooting area when the shutter button is pressed all the
way down, the camera will shoot after a person enters the shooting area and
winks.
Still Images
Using the Face Self-Timer
The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
shots.
1 os[ ].
choose [ ], and then press the <
button.
>
zzPress the <q><r> buttons or turn the
<7> dial to choose [ ], and then press
the < > button.
2 Compose the shot and press
the shutter button halfway.
zzMake sure a green frame is displayed
around the face you focus on and white
frames around other faces.
114
Special Modes for Other Purposes
3 Press the shutter button all the
way down.
XXThe camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
XXThe lamp blinks and the self-timer sound
is played.
4 Join the subjects in the
shooting area and look at the
camera.
XXAfter the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the flash fires, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
zzTo el sooting after you have
rigged the self-timer, press the
n> button.
• Even if your face is ot deected after you join the others in the shooting
area, the camera will shoot about 15 seconds later.
• To change the number of shots, press the <o><p> buttons after choosing
[
115
Special Modes for Other Purposes
Still Images
High-Speed Continuous Shooting
(High-speed Burst HQ)
You can shoot a series of shots in rapid succession by holding the shutter
button all the way down. For details on the continuous shooting speed, see
HQ: High Quality
1 Choose [ ].
choose [ ].
2 Shoot.
XXHold the shutter button all the way down
to shoot continuously.
zzShooting stopwhen you release the
shutteon or reach the maximum
er f shots, after which [Busy] is
ed and the shots are shown in the
order you took them.
• Focus, image brightness, and color are determined by the first shot.
• The screen is blank while you are shooting.
• There may be a delay after continuous shooting before you can shoot again.
Note that some types of memory cards may delay your next shot even
longer. SD Speed Class 6 or higher memory cards are recommended.
• Shooting may slow down depending on shooting conditions, camera settings,
and the zoom position.
116
Special Modes for Other Purposes
Images Displayed During Playback
Each set of images shot continuously is managed as a single group, and
only the first image in that group will be displayed. To indicate that the
image is part of a group, [
] is displayed in the upper left of the screen.
are also erased. Be careful when erasing images.
• Grouped images can be viewed individually when played back using Image
temporarily ungrouped.
117
Special Modes for Other Purposes
Still Images
Shooting Stitch Assist Images
Shoot a large subject by taking multiple shots at various positions, and then
1 Choose [x] or [v].
choose [x] or [v].
2 Take the first shot.
XXThe first shot will determine the exposure
and white balance.
3 Take itional shots.
zosthe second shot so that it
y overlaps the image area of the
first shot.
zzMinor misalignment of overlapping
portions will be corrected automatically
when the images are combined.
zzYou can take up to 26 shots, the same
way you took the second shot.
4 Finish shooting.
zzPress the <m> button.
5 Use the software to combine the
images.
zzFor instructions on merging images, refer
118
Movies
Movies
Shooting Various Movies
Shooting Movies in <E> Mode
1 Enter <E> mode.
zzSet the mode dial to <E>.
XXBlack bars displayed on the top and
bottom edges of the screen indicate
image areas not recorded.
2 Configure the settings to suit
3 Shoot.
zzPress the movie button.
zzTo stop movie recording, press the movie
button aa.
Movies
Locking or Changing Ie Brightness Before Shooting
Before shooting, you can lock the exposure or change it in 1/3-stop
increments within a range of –3 to +3.
1 Lock the exposure.
zzPress the < > button to lock the
exposure. The exposure shift bar is
displayed.
zzTo unlock the exposure, press the <
>
button again.
2 Adjust the exposure.
zzTurn the <7> dial to adjust the exposure,
as you watch the screen.
119
Shooting Various Movies
Movies
Shooting iFrame Movies
Shoot movies that can be edited with iFrame-compatible software or
devices. You can quickly edit, save, and manage iFrame movies using the
1 Choose [ ].
zzSet the mode dial to <E>.
zzPress the <m> button, choose [E]
in the menu, and then choose [
]
XXBlack bars displayed on the top and
bottom edges of the screen indicate
image areas not recorded.
• iFrame is a video formadeveloApple.
120
Shooting Various Movies
Movies
Shooting Super Slow Motion Movies
You can shoot fast-moving subjects for playback later in slow motion. Note
that sound is not recorded.
1 Choose [ ].
zzSet the mode dial to <E>.
zzPress the <m> button, choose [E]
in the menu, and then choose [
]
2 Choose a frame rate.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired frame
XXThe option ou configured is now
disd.
XXA bar showing the elapsed time is
displayed. Maximum clip length is approx.
30 sec.
Playback Time
Image Quality
Frame Rate
(For a 30-sec. Clip)
240 fps
120 fps
(320 x 240)
(640 x 480)
Approx. 4 min.
Approx. 2 min.
• Zooming is not available during recording, even if you move the
zoom lever.
• Focus, exposure, and color are determined when you press the
movie button.
121
Still Images
Shooting in Program AE Mode
(<P> Mode)
Movies
You can customize many function settings to suit your preferred shooting
style.
1 Enter <G> mode.
zzSet the mode dial to <G>.
2 Customize the settings as
then shoot.
• If adequate exposure cannot be obtained when you press the shutter button
halfway, shutter speeds and aperture values are displayed in orange. To
obtain adequate exposure, try adjusting the folwing settings.
• Movies can be recorded in <Gde well, by pressing the movie button.
automatically adjusted or movie rding.
124
Image Brightness
(Exposure Compensation)
Still Images
Adjusting Image Brightness
(Exposure Compensation)
The standard exposure set by the camera can be adjusted in 1/3-stop
increments, in a range of –3 to +3.
zzAs you watch the screen, turn the
exposure compensation dial to adjust
brightness.
XXThe correction level you specified is now
displayed.
125
Image Brightness (Exposure Compensation)
Still Images
Locking Image Brightness/Exposure (AE Lock)
Before shooting, you can lock the exposure, or you can specify focus and
exposure separately.
1 Lock the exposure.
zzAim the camera at the subject to shoot
with the exposure locked, and then press
the < > button.
XX[ ] is displayed, and the exposure is
locked.
2 Compose the shot and shoot.
zzAfter one shot, AE is unlocked and [ ] is
no longer displayed.
• AE: Auto Exposure
• After the exposure is locked, yn aust the combination of shutter
speed and aperture value by the 7> dial (Program Shift).
126
Image Brightness (Exposure Compensation)
Still Images
Changing the Metering Method
Adjust the metering method (how brightness is measured) to suit shooting
conditions as follows.
zzPress the < > button, choose the
desired option (either press the <q><r>
buttons or turn the <7> dial), and then
press the < > button again.
XXThe option you configured is now
displayed.
For typical shooting conditions, including backlit shots.
Evaluative
Automatically adjusts exposure to match the shooting conditions.
Determines the average brighess of light across the entire
image area, calculated by treng brightness in the central area
as more important.
Center
Weighted Avg.
Metering resto whin the [ ] (Spot AE Point frame).
You can also lSpot AE Point frame to the AF frame (see
below
Spot
127
Image Brightness (Exposure Compensation)
Still Images
Linking the Spot AE Point Frame to the AF Frame
1 Set the metering method to [ ].
2 Configure the setting.
zzPress the <n> button, choose
[Spot AE Point] on the [4] tab, and then
XXThe Spot AE Point frame will now be
linked to the movement of the AF frame
128
Image Brightness (Exposure Compensation)
Still Images
Changing the ISO Speed
zzPress the <o> button, choose an option
(either press the <q><r> buttons or turn
the <7> dial), and then press the <m>
button.
XXThe option you configured is now
displayed.
Automatically adjusts the ISO speed to suit the
shooting mode and conditions.
For shooting outdoors in fair weather.
For shooting in cloudy conditions, or at
twilight.
Low
High
or shting night scenes, or in dark
ms.
• To view the automically sespeed when the camera is set to [ ],
press the shutter buon hlfway.
• Although choosing a lower ISO speed may reduce image graininess, there
may be a greater risk of subject blurriness in some shooting conditions.
• Choosing a higher ISO speed will increase shutter speed, which may reduce
subject blurriness and increase the flash range. However, shots may look
grainy.
• To specify [ ], press the <
> button on the setting screen.
129
Image Brightness (Exposure Compensation)
Still Images
Adjusting the
Setting
When the camera is set to [ ], maximum ISO speed can be specified in
a range of [ ] – [ ], and sensitivity can be specified in a range of three
levels.
1 Access the setting screen.
zzPress the <n> button, choose [ISO
Auto Settings] on the [4] tab, and then
2 Configure the setting.
zzChoose a menu item to configure, and
• You can also access th[ISO Attings] screen when the ISO speed
Changing the Noise Reduction Level
(High ISO NR)
You can choose from 3 levels of noise reduction: [Standard], [High], [Low].
This function is especially effective when shooting at high ISO speeds.
Choose a noise reduction level.
zzPress the <n> button, choose [High
ISO NR] on the [4] tab, and then choose
130
Image Brightness (Exposure Compensation)
Still Images
Auto Exposure Bracketing (AEB Mode)
Three consecutive images are captured at different exposure levels
(standard exposure, underexposure, and then overexposure) each time
you shoot. You can adjust the amount of underexposure and overexposure
(relative to standard exposure) from –2 to +2 stops in 1/3-stop increments.
1 Choose [ ].
zzPress the <m> button, choose [
in the menu, and then choose [
]
]
2 Configure the setting.
zzPresthe n> button, and then
adjhe seing by pressing the
q>r> buttons or turning the <7> dial.
that function is treated as the standard exposure level for this function.
• You can also access the setting screen of step 2 by pressing the <n>
shot.
131
Image Brightness (Exposure Compensation)
Still Images
Correcting Image Brightness (i-Contrast)
Before shooting, excessively bright or dark image areas (such as faces or
backgrounds) can be detected and automatically adjusted to the optimal
brightness.
To avoid washed-out highlights, specify Dynamic Range Correction. To
preserve image detail in shadows, specify Shadow Correct.
• Under some shooting conditions, correction may be inaccurate or
may cause images to appear grainy.
• You can customize camera operation so that turning the <z> or <7> dial
Still Images
Dynamic Range Correction (DCorrection)
Tone down bright image areas, which migotherwise look washed out, as
follows.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
(
XXOnce the setting is complete, [@] is
displayed.
Available ISO Speed
Item
Details
–
–
Automatic adjustment to prevent washed-out
highlights
[
[
[
], [ ] – [
], [ ] – [
], [ ] – [
]
]
]
Tone down highlights by about 200% relative
to the brightness level of [ ].
Tone down highlights by about 400% relative
to the brightness level of [ ].
132
Image Brightness (Exposure Compensation)
supported range if you have specified a value outside the
supported range indicated here.
Still Images
Shadow Correct
Automatically preserve image detail in shadows as follows.
zzPress the <m> button, choose [ ] in
the menu, press the <n> button,
XXOnce the setting is complete, [@] is
displayed.
Using the ND Filter
To shoot at slower shutter speed smaller aperture values, use the ND
filter, which reduces lighintensit1/8 the actual level (equivalent to 3
stops).
zzPress the <m> button, choose [
in the menu, and then choose [
]
]
• Mount the camera on a tripod or take other measures to keep it
still and prevent camera shake. Additionally, you should set [IS
Mode] to [Off] when using a tripod or other means to hold the
133
Color and Continuous Shooting
Still Images
Movies
Adjusting White Balance
By adjusting white balance (WB), you can make image colors look more
natural for the scene you are shooting.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
XXThe option you configured is now
displayed.
Automatically sets the optimal white balance for the shooting
conditions.
Auto
Day Light
Cloudy
For shooting outdoors in fair wether.
For shooting in cloudy itionsin the shade, or at twilight.
For shooting unrdiny incandescent (tungsten) lighting
and similarly coorscent lighting.
Tungsten
For shoting undrm-white (or similarly colored) or cool-
white fluescet lighting.
Fluorescent
For shooting under daylight fluorescent and similarly colored
fluorescent lighting.
Fluorescent H
Flash
For shooting with the flash.
h
Sets the optimal white balance for shooting underwater. Tones
down blues to produce natural-looking colors overall.
Underwater
Custom
S
134
Color and Continuous Shooting
Still Images
Movies
Custom White Balance
For image colors that look natural under the light in your shot, adjust white
balance to suit the light source where you are shooting. Set the white
balance under the same light source that will illuminate your shot.
[
] or [ ].
zzAim the camera at a plain white subject,
so that the entire screen is white. Press
the <n> button.
XXThe tint of the screen changes once the
white balance data has been recorded.
• Colors may look unnatural if you chage camera settings after
recording white balance data.
Still Images
Movies
Manually Correctng WBalance
You can manually correcwhite balance. This adjustment can match the
effect of using a commercially available color temperature conversion filter
or color-compensating filter.
1 Configure the setting.
the white balance option.
zzTurn the <z> dial to adjust the
correction level for B and A.
135
Color and Continuous Shooting
2 Configure advanced settings.
zzTo configure more advanced settings,
press the <n> button and turn
the <z> or <7> dial to adjust the
correction level.
zzTo reset the correction level, press the
<
> button.
zzPress the <n> button to complete
the setting.
• The camera will retain white balance correction levels even if you
switch to another white balance option in step 1, but correction
levels will be reset if you record custom white balance data.
• B: blue; A: amber; M: magenta; G: green
• One level of blue/amber correction is equivato about 7 mireds on a color
temperature conversion filter. (Mired: temerature unit representing
color temperature conversion filtden)
• You can customize camera opso hat the B and A adjustment screen
136
Color and Continuous Shooting
Still Images
Movies
Changing Image Color Tones (My Colors)
Change image color tones as desired, such as converting images to sepia
or black and white.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
XXThe option you configured is now
displayed.
–
My Colors Off
Vivid
Emphasizes contrast and color saturation, making images
sharper.
Tones down cst ancolor saturation for subdued
images.
Neutral
Sepia
Createtoe images.
B/W
Creates bk and white images.
Cmbnes the effects of Vivid Blue, Vivid Green, and
Vivid Red to produce intense yet natural-looking colors
resembling images on positive film.
Positive Film
Lighter Skin Tone
Darker Skin Tone
Lightens skin tones.
Darkens skin tones.
Emphasizes blues in images. Makes the sky, ocean, and
other blue subjects more vivid.
Vivid Blue
Emphasizes greens in images. Makes mountains, foliage,
and other green subjects more vivid.
Vivid Green
Vivid Red
Emphasizes reds in images. Makes red subjects more
vivid.
Adjust contrast, sharpness, color saturation, and other
Custom Color
137
Color and Continuous Shooting
• With [ ] and [ ] modes, colors other than people’s skin tone
may be modified. These settings may not produce the expected
results with some skin tones.
Still Images
Movies
Custom Color
Choose the desired level of image contrast, sharpness, color saturation,
red, green, blue, and skin tones in a range of 1 – 5.
1 Access the setting screen.
[
], and then press the <n> button.
2 Configure the setting.
zzPress the <o<p> buttons to choose
an optand ten specify the value by
ing he <q><r> buttons or turning
> dial.
zzFor stronger/more intense effects (or
darker skin tones), adjust the value to
the right, and for weaker/lighter effects
(or lighter skin tones), adjust the value to
the left.
zzPress the <n> button to complete
the setting.
138
Color and Continuous Shooting
Still Images
Continuous Shooting
Hold the shutter button all the way down to shoot continuously.
For details on the continuous shooting speed, see “Specifications”
1 Configure the setting.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
XXThe option you configured is now
displayed.
2 Shoot.
XXHold the shutter button all the way down
to shot cotinuously.
Mode
Description
Continuous swith the focus and exposure determined
when ou press shutter button halfway.
Continuous
W
Continuous
Shooting AF
Continuus sooting and focusing.
[AF Frame] is set to [Center] and cannot be changed.
Continuous shooting, with the focus fixed at the position
determined in manual focusing. In [t] mode, focus is determined
by the first shot.
Continuous
Shooting LV*
changed to [ ].
* For details on the continuous shooting speed in each mode, see “Specifications”
• Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
• As more shots are taken, shooting may slow down.
• Shooting may slow down if the flash fires.
139
Shooting Range and Focusing
Still Images
Movies
Shooting at Preset Focal Lengths (Step Zoom)
You can shoot at preset focal lengths of 28, 35, 50, 85, 100 or 140 mm
(35mm film equivalent). This is convenient when you want to shoot at the
angle of view of those focal lengths.
1 Assign [
] to the <z> dial
2 Choose a focal length.
zzTurn the <z> dial clockwise until it
clicks to change the focal length from
28 mm to 35 mm. Keep turning the <z>
dial to increase the focal length, which
changes to 50, 85, 100, and 140 mm at
each clik.
• Step zoom is not availawheshooting movies even if you turn
the <z> dial.
will not change the zoom factor. However, turning the <z> dial
counterclockwise will set the focal length to 140 mm.
141
Shooting Range and Focusing
Still Images
Movies
Shooting Close-ups (Macro)
To restrict the focus to subjects at close range, set the camera to [e]. For
zzPress the <q> button, choose [e] (either
press the <q><r> buttons or turn the
<7> dial), and then press the <m>
button.
XXOnce the setting is complete, [e] is
displayed.
• If the flash fires, vignetting may occur.
• Be careful to avoid damaging the lens.
• To prevent camera shake, try mounticama on a tripod and shooting
Still Images
Movies
Shooting in Manual Focus Mode
When focusing is not possible in AF mode, use manual focus. You can
specify the general focal position and then press the shutter button halfway
to have the camera determine the optimal focal position near the position
you specified. For details on the focusing range, see “Specifications”
1 Choose [f].
zzPress the <q> button and choose [f],
either by pressing the <q><r> buttons or
turning the <7> dial. Immediately press
the <m> button.
XX[f] and the MF indicator are displayed.
142
Shooting Range and Focusing
2 Specify the general focal
position.
zzReferring to the on-screen MF indicator
bar (which shows the distance and focal
position) and the magnified display area,
press the <o><p> buttons or turn the
<7> dial to specify the general focal
position, and then press the <m> button.
MF Indicator
3 Fine-tune the focus.
zzPress the shutter button halfway to have
the camera fine-tune the focal position
(Safety MF).
zzYou can also fine-tune the focus by
pressing the < > button.
• AF frame mode or size cannchaged while focusing
size, cancel manual foode first.
• To focus more accurately, try attaching the camera to a tripod to stabilize it.
• To hide the magnified display area, press the <n> button and set
• To deactivate automatic focus fine-tuning when the shutter button is pressed
halfway, press the <n> button and set [Safety MF] on the [4] tab to
143
Shooting Range and Focusing
Still Images
Movies
Digital Tele-Converter
The focal length of the lens can be increased by approximately 1.5x or 2.0x.
This can reduce camera shake because the shutter speed is faster than it
would be if you zoomed (including using digital zoom) in to the same zoom
factor.
zzPress the <n> button, choose
[Digital Zoom] on the [4] tab, and then
XXThe view is enlarged and the zoom factor
is displayed on the screen.
• The digital tele-converter cannot be usewith digital zoom
• The respective focal lengths wng 1.5x] and [2.0x] are 42.0 –
210.0 mm and 56.0 – 280.0 mm m film equivalent).
• The shutter speed may e eqivalent when you move the zoom lever all the
way toward <i> for maximum telephoto, and when you zoom in to enlarge
144
Shooting Range and Focusing
Still Images
Movies
Changing the AF Frame Mode
Change the AF (auto focus) frame mode to suit the shooting conditions as
follows.
zzPress the <n> button, choose [AF
Frame] on the [4] tab, and then choose
Still Images
Movies
Face AiAF
•
•
Detects people’s faces, and then she fcus, exposure (evaluative
metering only), and white balance (only)
After you aim the camera at bjet, a white frame is displayed
around the person’s face deteed by the camera to be the main
subject, and up to two ray ames are displayed around other detected
faces.
•
•
When the camera detects movement, frames will follow moving subjects,
within a certain range.
After you press the shutter button halfway, up to nine green frames are
displayed around faces in focus.
145
Shooting Range and Focusing
• If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in
the areas in focus when you press the shutter button halfway.
the AF frame is displayed in the center of the screen when you
press the shutter button halfway.
• Examples of faces that cannot be detected:
- Subjects that are distant or extremely close
- Subjects that are dark or light
- Faces in profile, at an angle, or partly hidden
• The camera may misinterpret non-human subjects as faces.
• No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
Still Images
FlexiZone/Center
One AF frame is displayed. Effective for rble focusing.
• A yellow AF frame is displayed with [ ] if the camera cannot
focus when you press the shutter button halfway. Note that AF-
• To compose shots so that subjects are positioned at the edge or in a corner,
first aim the camera to capture the subject in an AF frame, and then hold
the shutter button halfway down. As you continue to hold the shutter button
halfway, recompose the shot as desired, and then press the shutter button all
the way down (Focus Lock).
146
Shooting Range and Focusing
Still Images
Moving and Resizing AF Frames (FlexiZone)
When you want to change the position or size of the AF frame, set the AF
1 Prepare to move the AF frame.
zzPress the < > button. The AF frame
turns orange.
2 Move and resize the AF frame.
zzTurn the <7> dial to move the AF frame,
or press the <o><p><q><r> buttons
to move it by a smaller amount.
zzTo return the AF frame to the original
position in the center, keep the <
>
button hld down.
zzTo ce the AF frame size, press the
n> button. Press it again to restore
the original size.
3 Finish the setup process.
zzPress the < > button.
• AF frames are displayed at normal size when you use the digital
147
Shooting Range and Focusing
Still Images
Choosing Subjects to Focus On (Tracking AF)
Shoot after choosing a subject to focus on as follows.
1 Choose [Tracking AF].
[Tracking AF].
XX[ ] is displayed in the center of the
screen.
2 Choose a subject to focus on.
zzAim the camera so that [ ] is on the
desired subject, and then press the <
button.
>
XXWhen tsubject is detected, the camera
and [ ] is displayed. Even if the
st moves, the camera will continue
o track the subject within a certain range.
XXIf no subject is detected, [ ] is
displayed.
zzTo cancel tracking, press the < > button
again.
3 Shoot.
zzPress the shutter button halfway. [
]
changes to a blue [ ], which follows
the subject as the camera continues to
adjust the focus and exposure (Servo AF)
zzPress the shutter button all the way down
to shoot.
XXEven after your shot, [ ] is still
displayed and the camera continues to
track the subject.
148
Shooting Range and Focusing
• Tracking may not be possible when subjects are too small or move
too rapidly, or when subject color or brightness matches that of the
background too closely.
• [AF-Point Zoom] on the [4] tab is not available.
• [e] is not available.
• The camera can detect subjects even if you press the shutter button halfway
without pressing the <
center of the screen.
> button. After your shot, [ ] is displayed in the
149
Shooting Range and Focusing
Still Images
Shooting with Servo AF
This mode helps avoid missing shots of subjects in motion, because the
camera continues to focus on the subject and adjust the exposure as long
as you press the shutter button halfway.
1 Configure the setting.
zzPress the <n> button, choose
[Servo AF] on the [4] tab, and then
2 Focus.
zzThe focus and exposure are maintained
where tblue AF frame is displayed
while yre prssing the shutter button
y.
• Focusing may not be possble in some shooting conditions.
• In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway.
In this case, the focus and exposure are set according to the
specified AF frame mode.
• If adequate exposure cannot be obtained, shutter speeds and
aperture values are displayed in orange. Release the shutter
button, and then press it halfway again.
• AF lock shooting is not available.
• [AF-Point Zoom] on the [4] tab is not available.
150
Shooting Range and Focusing
Still Images
Changing the Focus Setting
You can change default camera operation of constantly focusing on
subjects it is aimed at, even when the shutter button is not pressed. Instead,
you can limit camera focusing to the moment you press the shutter button
halfway.
zzPress the <n> button, choose
[Continuous AF] on the [4] tab, and then
Helps avoid missing sudden photo
opportunities, because the camera
constantly focuses on subjects until you
On
press the shutter button halfway.
Conserves battery power, because the
Off
camera does not focus constantly.
Still Images
Choosing a PersoFocus On (Face Select)
You can shoot after choosing a specific person’s face to focus on.
1 Set the AF frame to [Face AiAF]
2 Enter Face Select mode.
zzAim the camera at the person’s face and
press the < > button.
XXAfter [Face Select : On] is displayed, a
face frame [ ] is displayed around the
face detected as the main subject.
zzEven if the subject moves, the face frame
[
] follows the subject within a certain
range.
zzIf a face is not detected, [ ] is not
displayed.
151
Shooting Range and Focusing
3 Choose the face to focus on.
zzTo switch the face frame [ ] to another
detected face, press the < > button.
zzAfter you have switched the face frame
to all detected faces, [Face Select : Off]
is displayed, and the specified AF frame
mode screen is displayed again.
4 Shoot.
zzPress the shutter button halfway. After the
camera focuses, [ ] changes to [ ].
zzPress the shutter button all the way down
to shoot.
Stmages
Movies
Shooting with the AF Lo
The focus can be locked. After you he ocus, the focal position will not
change even when you relese youer from the shutter button.
1 Lock the focus.
zzWith the shutter button pressed halfway,
press the <q> button.
XXThe focus is now locked, and [f] and
the MF indicator are displayed.
zzTo unlock the focus, once again hold the
shutter button halfway down and press
the <q> button.
2 Compose the shot and shoot.
152
Shooting Range and Focusing
Still Images
Focus Bracketing (Focus-BKT Mode)
Three consecutive images are captured each time you shoot, with the
first one at the focal distance you set manually and the others at farther
and nearer focal positions determined by presets. The distance from your
specified focus can be set in three levels.
1 Choose [ ].
zzPress the <m> button, choose [
in the menu, and then choose [
]
]
2 Configure the setting.
zzPresthe n> button, and then
adjhe seing by pressing the
q>r> buttons or turning the <7> dial.
• You can also access the setting screen in step 2 by choosing [f] in step 1
shot.
153
Flash
Still Images
Activating Flash
You can have the flash fire for each shot. For details on the flash range, see
1 Raise the flash.
zzMove the < > switch.
2 Configure the setting.
zzPress the <r> button, choose [h] (either
press the <q><r> buttons or turn the
<7> dial), and then press the <m>
button.
XXOnce the setting is complete, [h] is
displayed.
• The setting screen cannot be aced bpressing the <r>
button when the flash is lowered. ve the < > switch to raise
the flash, then configure thng
154
Flash
Still Images
Shooting with Slow Synchro
With this option, the flash fires to increase the brightness of the main
subject (such as people) while the camera shoots at a slow shutter speed to
increase the brightness of the background that is out of the flash range.
1 Raise the flash.
zzMove the < > switch.
2 Configure the setting.
zzPress the <r> button, choose [Z] (either
press the <q><r> buttons or turn the
<7> dial), and then press the <m>
button.
XXOnce the stting is complete, [Z] is
displyed.
3 Sht.
n after the flash fires, ensure that
e main subject does not move until the
shutter sound is finished playing.
• Mount the camera on a tripod or take other measures to keep it
still and prevent camera shake. Additionally, you should set [IS
Mode] to [Off] when using a tripod or other means to hold the
• The setting screen cannot be accessed by pressing the <r>
button when the flash is lowered. Move the < > switch to raise
the flash, then configure the setting.
155
Flash
Still Images
Adjusting the Flash Exposure Compensation
flash exposure from –2 to +2 stops, in 1/3-stop increments.
zzRaise the flash, press the <r> button and
immediately turn the <z> dial to choose
the compensation level, and then press
the <m> button.
XXOnce the setting is complete, [X] is
displayed.
• When there is a risk of overexposure, the camera automatically adjusts the
shutter speed or aperture value during the flasshots to reduce washed-
out highlights and shoot at optimal exposurHwever, you can deactivate
automatic adjustment of the shutter sand perture value by accessing
to [Off].
• You can also configure he flassure compensation by choosing [X]
choosing [Flash Exp. Cop] i[Flash Control] on the [4] tab.
• You can also access the [Built-in Flash Settings] <n> screen as follows
(except when an optional external flash is mounted).
- Press and hold the <r> button for at least one second.
- When the flash is up, press the <r> button and immediately press the
<n> button.
156
Flash
Still Images
Shooting with the FE Lock
shots.
1 Raise the flash and set it to [h]
2 Lock the flash exposure.
zzAim the camera at the subject to shoot
with the exposure locked, and then press
the < > button.
XXThe flash fires, and when [ ] is
displayed, the flash output level is
retained.
3 Composthe shot and shoot.
zzAfte sho, FE is unlocked and [ ] is
loger displayed.
• FE: Flash Exposur
157
Flash
Still Images
Changing the Flash Timing
Change the timing of the flash and shutter release as follows.
1 Access the setting screen.
zzPress the <n> button, choose [Flash
Control] on the [4] tab, and then press
2 Configure the setting.
zzChoose [Shutter Sync.], and then choose
1st-
The flash fires immediately after the
curtain shutter opens.
2nd- The flasfires immediately before the
curtain shutteoses.
158
Still Images
Shooting RAW Images
RAW images are “raw” (unprocessed) data, recorded with essentially no
loss of image quality from the camera’s internal image processing. Use
minimal loss of image quality.
zzPress the <m> button, choose [ ] in
the menu, and choose the desired option
Records JPEG images. JPEG images are processed in the camera for optimal
image quality and compressed to reduce file size. However, the compression
process is irreversible, and images cannot be restored to their original,
unprocessed state. Image processing may alscause some loss of image
quality.
Records RAW images. RAW images raw” (unprocessed) data, recorded with
essentially no loss of image qrothe camera’s image processing. The
data cannot be used in this stiewing or printing on a computer. You must
first use the included oftware (al Photo Professional) to convert images to
ordinary JPEG or TIFF les. mages can be adjusted with minimal loss of image
quality.
For details on resolution and the number of shots that will fit on a card, see
Records two images, both a RAW image and a JPEG image, for each shot.
The JPEG image can be printed or viewed on a computer without using the
included software.
• When transferring RAW images (or RAW and JPEG images
recorded together) to a computer, always use the included
• The file extension for JPEG images is .JPG, and the extension for RAW
images is .CR2.
159
Other Settings
Still Images
Changing the Compression Ratio
(Image Quality)
Choose from two compression ratios, as follows: [ ] (Super Fine),
] (Fine). For guidelines on how many shots at each compression ratio
[
Configure the setting.
zzPress the <m> button, choose [ ] in
the menu, press the <n> button,
ilmages
Movies
Changing the IS Mode Sings
zth<n> button, choose [IS
Mon the [4] tab, and then press the
<q><r> buttons to choose the desired
Optimal image stabilization
for the shooting conditions is
automatically applied (Intelligent
Continuous
Image stabilization is active only at
Shoot Only*
the moment of shooting.
Off
Deactivates image stabilization.
* The setting is changed to [Continuous] for movie
recording.
• If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this
case, set [IS Mode] to [Off].
160
Still Images
Specific Shutter Speeds (<Tv> Mode)
Set your preferred shutter speed before shooting as follows. The camera
automatically adjusts the aperture value to suit your shutter speed.
1 Enter <M> mode.
zzSet the mode dial to <M>.
2 Set the shutter speed.
zzTurn the <z> dial to set the shutter
speed.
• With shutter speeds of 1.3 seconds or slwer, there will be a delay
before you can shoot again, as imes ae processed to remove
noise.
• When shooting at low shuees on a tripod, you should set
• Maximum shutter sped with the flash is 1/2000 second. If you
specify a faster speed, the camera will automatically reset the
speed to 1/2000 second before shooting.
• With shutter speeds of 1.3 seconds or slower, ISO speed is [
and cannot be changed.
]
• Orange display of aperture values when you press the shutter
button halfway indicates that the settings deviate from standard
exposure. Adjust the shutter speed until the aperture value is
• <M>: Time value
• You can customize camera operation so that turning the <7> dial changes
162
Still Images
Specific Aperture Values (<Av> Mode)
Set your preferred aperture value before shooting as follows. The camera
automatically adjusts the shutter speed to suit your aperture value.
1 Enter <B> mode.
zzSet the mode dial to <B>.
2 Set the aperture value.
zzTurn the <z> dial to set the aperture
value.
• Orange display of shutter speeds whn you press the shutter
button halfway indicates that tsettigs deviate from standard
exposure. Adjust the aperture e untl the shutter speed is
displayed in white, or ufetshift (see below).
• <B>: Aperture vaue (size of the opening made by the iris in the lens)
• To avoid exposure problems in <M> and <B> modes, you can have the
camera automatically adjust the shutter speed or aperture value, even when
standard exposure cannot otherwise be obtained. Press the <n> button
However, safety shift is disabled when the flash fires.
• You can customize camera operation so that turning the <7> dial changes
163
Still Images
Specific Shutter Speeds and Aperture
Values (<M> Mode)
Follow these steps before shooting to set your preferred shutter speed and
aperture value to obtain the desired exposure.
For details on available shutter speeds and aperture values, see
1 Enter <D> mode.
zzSet the mode dial to <D>.
2 Configure the setting.
zzTurn the <z> dial to set the shutter
speed, and turn the <7> dial to set the
aperture value.
XXAn exposure level mark based on your
specified valuis shown on the exposure
level indicator or comparison to the
standxposre level.
Aperture Value
Shutter Speed
Standard
Exposure Level
Exposure Level
Mark
Exposure Level
Indicator
Xxpsure level mark is shown
ge when the difference from
staard exposure exceeds 2 stops. “–2”
or “+2” is displayed in orange in the lower
right when you press the shutter button
halfway.
• After you set the shutter speed or aperture value, the exposure
level may change if you adjust the zoom or recompose the shot.
• Screen brightness may change depending on your specified
shutter speed or aperture value. However, screen brightness
remains the same when the flash is up and the mode is set to [h].
• To have both the shutter speed and aperture value automatically
adjusted to obtain standard exposure, hold the shutter button
halfway and press the < > button. Note that standard exposure
may not be possible with some settings.
• With shutter speeds of 1.3 seconds or slower, ISO speed is [
]
and cannot be changed.
164
Specific Shutter Speeds and Aperture Values (<M> Mode)
• <D>: Manual
• Calculation of standard exposure is based on the specified metering method
• You can customize camera operation so that turning the <7> dial adjusts
the shutter speed and turning the <z> dial adjusts the aperture value
Still Images
Adjusting the Flash Output
Choose from the three flash levels in <D> mode.
1 Enter <D> mode.
zzSet the mode dial to <D>.
2 Configure the setting.
zzRaise the flash, press the <r> button and
immatelturn the <z> dial to choose
the h level, and then press the <m>
to.
ce the setting is complete, [X] is
displayed.
• You can also set the flash level by choosing [X] in the FUNC. menu
in [Flash Control] on the [4] tab.
• You can set the flash level in <M> or <B> mode by accessing <n>
Mode] to [Manual].
• You can also access the [Built-in Flash Settings] <n> screen as follows
(except when an external flash (sold separately) is attached to the camera).
- Press and hold the <r> button for at least one second.
- When the flash is up, press the <r> button and immediately press the
<n> button.
165
Customization for Shooting Styles
Still Images
Movies
Customizing Display Information
displayed in each display when the <p> button is pushed in shooting
display.
1 Access the setting screen.
zzPress the <n> button, choose
[Custom Display] on the [4] tab, and
2 Choose [LCD/Viewfinder].
zzPress the <o><p><q><r> buttons or
turn the <7> dial, and then press the
<m> button to configure custom displays
[
], [ ] or [ ] which are displayed
when tp> utton is pressed.
zzTdeacate a custom display, press the
buon to add [ ] to [ ], [ ] or
[
zzNote that [ ] cannot be applied to [LCD/
Viewfinder] custom display currently in
use.
3 Configure the setting.
zzPress the <o><p><q><r> buttons or
turn the <7> dial to choose an item, and
then press the <m> button. Items you
choose for display are labeled with [ ].
XXSelected items (labeled with a [ ]) will
be included in display.
Shooting Info
Grid Lines
Displays a reference grid.
Electronic Level
modes.
Histogram
166
Customization for Shooting Styles
• Settings will not be saved if you press the shutter button halfway
and return to the shooting screen from the custom display settings
screen.
• Grayed-out items can also be specified, but they may not be
displayed in some shooting modes.
• Grid lines are not recorded in your shots.
167
Customization for Shooting Styles
Still Images
Movies
Assigning Functions to the Front Dial and
Control Dial
Assign commonly used functions to the front dial and control dial, by
shooting mode.
1 Access the setting screen.
zzPress the <n> button, choose [Set
z7Func.] on the [4] tab, and then
2 Configure the setting.
zzPress the <q><r> buttons to choose an
item.
zzTo configure the settings, press the
<o><p> buttns, choose an item (either
press to>p><q><r> buttons
or urn <7> dial), and then turn the
dil to change the function.
Assignable Functions
Functions you can assign to the front dial and control dial vary depending
on shooting mode. On the setting screen, you can assign aspect ratio
in the following table.
Shooting Mode
Item
D B M
M B M
B,
G
z
7
Front Dial 1
Front Dial 2
Control Dial
z B B M
7
M,
z
7 B, M B M
• When multiple functions are assigned to the <7> dial, press the <
switch between them.
> button to
168
Customization for Shooting Styles
Still Images
Movies
Assigning Functions to the < > Button
1 Access the setting screen.
zzPress the <n> button, choose [Set
Shortcut button] on the [4] tab, and then
2 Configure the setting.
zzPress the <o><p><q><r> buttons or
turn the <7> dial to choose a function to
assign, and then press the <m> button.
3 Use the assigned function as
needed.
zzPress the < > button to activate the
assigned fnction.
• To restore default settings, cose ].
• Icons labeled with [ ] indat te function is not available in the current
shooting mode or under curnction conditions.
• When the [ ] or [ ] funcion is used, each press of the < > button
to [ ] or [ ].
• When the [%] function is used, each press of the < > button adjusts and
locks the focus, and [%] is displayed on the screen.
• Pressing the < > button when the [ ] function is used deactivates screen
display. To restore the display, do any of the following.
- Press any button (other than the power button)
- Hold the camera in another orientation
- Raise and lower the flash
169
Customization for Shooting Styles
Still Images
Saving Shooting Settings
Save commonly used shooting modes and your configured function settings
for reuse. To access saved settings later, simply turn the mode dial to <
or < >. Even settings that are usually cleared when you switch shooting
>
modes or turn the camera off (such as self-timer settings) can be retained
this way.
Settings that can be saved
•
•
•
•
•
•
Shooting modes (<G>, <M>, <B>, and <D>)
Shooting menu settings
Zoom positions
1 Enter shooting mode with
ngs you want to save, and
cge the settings as desired.
2 Configure the setting.
zzPress the <n> button, choose [Save
Settings] on the [4] tab, and then press
the <m> button.
3 Save the settings.
zzPress the <q><r> buttons or turn the
<7> dial to choose the destination, and
then press the <m> button.
170
Customization for Shooting Styles
• To edit saved settings (except their shooting mode), choose <
>
or < >, change the settings, and then repeat steps 2 – 3. These
setting details are not applied in other shooting modes.
• To clear information you have saved to < > or < > and restore default
values, turn the mode dial to < > or < > and choose [Reset All]
Still Images
Movies
Saving Commonly Used Shooting Menus
(My Menu)
Save up to five commonly used shooting menus as menus on the [ ] tab,
for instant access to all of these items from a single screen.
1 Access the setting screen.
zzPrhe <n> button, choose [My
Mensettings] on the [ ] tab, and then
2 Configure the setting.
zzPress the <o><p> buttons or turn the
<7> dial to choose [Select items], and
then press the <m> button.
zzPress the <o><p> buttons or turn the
<7> dial to choose menus to save (up to
five), and then press the <m> button.
XX[ ] is displayed.
zzTo cancel saving, press the <m> button.
[
] is no longer displayed.
zzPress the <n> button.
171
Customization for Shooting Styles
3 Rearrange the menu list order,
as needed.
zzPress the <o><p> buttons or turn the
<7> dial to choose [Sort], and then press
the <m> button.
zzPress the <o><p> buttons or turn the
<7> dial to choose a menu to move, and
then press the <m> button.
zzPress the <o><p> buttons or turn the
<7> dial to change the order, and then
press the <m> button.
zzPress the <n> button.
• Grayed-out items in step 2 can also be specified, but they may not
be available in some shooting modes.
• To make My Menu immediately accesby presing the <n> button
in Shooting mode, choose [Seult w] and press the <q><r> buttons
to choose [Yes].
172
6
Playback Mode
Have fun reviewing your shots, anbrowse or edit them
in many ways
•
To prepare the camera for these operations, press the <1> button to
enter Playback mode.
• It may not be possible to play back or edit images that were
renamed or already edited on a computer, or images from other
cameras.
173
Still Images
Movies
Viewing
After shooting images or movies, you can view them on the screen as
follows.
1 Enter Playback mode.
zzPress the <1> button.
XXYour last shot is displayed.
2 Browse through your images.
zzTo view the previous image, press
the <q> button or turn the <7> dial
counterclockwise. To view the next
image, press the <r> button or turn the
<7> dial clockwise.
zzPress and holthe <q><r> buttons to
browse throuimages quickly.
zzTo access Scroll Display mode, turn the
<7> dial rapidly. In this mode, turn the
<7> dial to browse through images.
zzTo return to single-image display, press
the <m> button.
zzTo browse images grouped by shooting
date, press the <o><p> buttons in
Scroll Display mode.
zzMovies are identified by a [
] icon. To
play movies, go to step 3.
174
Viewing
3 Play movies.
zzTo start playback, press the <m> button
to access the movie control panel,
choose [ ] (either press the <q><r>
buttons or turn the <7> dial), and then
press the <m> button again.
4 Adjust the volume.
Volume
zzPress the <o><p> buttons to adjust the
volume.
5 Pause playback.
zzTo pause or resume playback, press the
<m> button.
XXAfter the movie is finished, [
] is
displayed.
• To switch to Shooting mode from ack ode, press the shutter button
halfway.
• To deactivate Scroll Displas the <n> button, choose [Scroll
Display] on the [1tab, anchoose [Off].
• If you prefer to havthe most recent shot displayed when you enter
Playback mode, presth<n> button, and on the [1] tab, choose
[Resume] and then [Last shot].
• To change the transition shown between images, press the <n> button,
choose [Transition] on the [1] tab, and then press the <q><r> buttons to
choose the effect.
175
Viewing
Still Images
Movies
Switching Display Modes
Press the <p> button to view other information on the screen, or to hide
No Information
Display
Simple
Information
Display
Detailed
Information
Display
Enables you to
check the focus
*Not shown for movies.
• Switching display modes by pressing the <p> button is also possible
immediately after you shoot, while your shois isplayed. However, simple
information display is not available. To nge te initial display mode, press
Still Images
Movies
Overexposure Warning (or Image Highlights)
Washed-out highlights in the image flash on the screen in detailed
information display.
Still Images
Movies
Histogram
High
Low
zzThe graph in detailed information display
(see above) is a histogram showing the
distribution of brightness in the image.
The horizontal axis represents the degree
of brightness, and the vertical axis, how
much of the image is at each level of
brightness. Viewing the histogram is a
way to check exposure.
Dark
Bright
zzThe histogram can also be accessed
176
Viewing
Still Images
Movies
RGB Histogram
zzTo view an RGB histogram, press the
<o> button in detailed information
display. The RGB histogram shows the
distribution of shades of red, green, and
blue in an image. The horizontal axis
represents R, G, or B brightness, and the
vertical axis, how much of the image is
at that level of brightness. Viewing this
histogram enables you to check image
color characteristics.
RGB Histogram
zzPress the <o> button again to return to
detailed information display.
Still Images
Checking People Deteed in Face ID
displayed.
Switch to simple information
display mode and check.
zzPress the <p> button repeatedly until
simple information display is activated,
and then press the <q><r> buttons to
choose an image.
zzNames will be displayed on detected
people.
• If you do not want names to display on images shot using Face ID, press the
<n> button, choose [Face ID Info] on the [1] tab, and then set [Name
Display] to [Off].
177
Viewing
Viewing Movie Digest Clips
still image shooting as follows.
1 Choose an image.
zzStill images shot in [ ] mode are labeled
with an [
] icon.
zzChoose a still image labeled with [
]
and press the <m> button.
2 Play the clip.
zzAfter [Play back
movie?] is displayed,
press the <q><r> buttons or turn the
<7> dial to chose [OK], and then press
the <mbutto.
XXTmoclip recorded automatically on
y ostill image shooting is played
brom the beginning.
• After a moment, [
] will no longer be displayed when you are using the
178
Viewing
Still Images
Checking the Focus
To check the focus of your shots, you can magnify the area of the image
that was in the AF frame at the time of shooting.
1 Access Focus Check.
XXA white frame is displayed where the AF
frame was when the focus was set.
XXGray frames are displayed over faces
detected later, in Playback mode.
XXThe portion of the image in the orange
frame is magnified.
2 Switch frames.
zzMove the om lever toward <k> once.
XXTheen t left is displayed.
stch to a different frame when there
multiple frames, press the <m>
button.
3 Zoom in or out, or view other
image areas.
zzAs you examine the focus, use the
zoom lever to zoom in or out. Press the
<o><p><q><r> buttons to adjust the
display position.
zzPress the <n> button to restore the
original display in step 1.
179
Browsing and Filtering Images
Still Images
Movies
Navigating Through Images in an Index
By displaying multiple images in an index, you can quickly find the images
you are looking for.
1 Display images in an index.
zzMove the zoom lever toward <g> to
display images in an index. Moving the
lever again will increase the number of
images shown.
zzTo display fewer images, move the zoom
lever toward <k>. Fewer images are
shown each time you move the lever.
2 Choose an image.
zzTurn the <7> ial to scroll through the
image
zzPs t<o><p><q><r> buttons to
e aimage.
XXAnge frame is displayed around the
selected image.
zzPress the <m> button to view the
selected image in single-image display.
180
Browsing and Filtering Images
Still Images
Movies
Finding Images Matching Specified Conditions
Find desired images quickly on a memory card full of images by filtering
image display according to your specified conditions. You can also protect
Favorites
Shot Date
Displays the images shot on a specific date.
Displays the images of a specific category
My Category
;
Displays still images, movies, or movies shot in
Still image/Movie
Name
[
Still Images
Movies
Filtering Display by [ ], [ [ ], or [
]
;
1 Chse the first condition for
age display or navigation.
zsingle-image display, press the <
button, and then press the <o><p>
buttons to choose a display filter.
>
zzWhen [ ] is selected, you can view
only images matching this condition by
pressing the <q><r> buttons. To perform
an action for all of these images together,
press the <m> button and go to step 3.
181
Browsing and Filtering Images
2 Choose the second condition
and check the images found.
zzPress the <q><r> buttons to choose
another condition. Once you turn the
<7> dial, you can view the images
narrowed down by your conditions.
zzTo cancel this mode, press the <n>
button.
zzTo switch to filtered image display, press
the <m> button and go to step 3.
3 View the filtered images.
zzImages matching your conditions are
displayed in yellow frames. To view
only these images, press the <q><r>
buttons, or turthe <7> dial.
zzTo exit red image display, press the
<
> bon, and after [Image search
edis displayed, press the <m>
b
• When the camera has found no corresponding images for some
conditions, those conditions will not be available.
images found or add them to a photobook by choosing [Select All Images
display ends.
182
Browsing and Filtering Images
Still Images
Filtering Display by [
]
1 Choose [ ].
choose [ ] and press the <m> button.
2 Choose a person.
zzPress the <o><p><q><r> buttons
to choose a person, and then press the
<m> button.
3 View the filtered images.
images.
183
Browsing and Filtering Images
Still Images
Movies
Using the Front Dial to Jump
Use the front dial to find and jump between desired images quickly by
filtering image display according to your specified conditions.
Jump to Favorites
Jumps to the first image in each group of images that
were shot on the same date.
Jump Shot Date
Jump 10 Images
Jump 100 Images
Jumps by 10 images at a time.
Jumps by 100 images at a time.
1 Choose a condition.
zzChoose a condition (or jump method) in
single-image display by turning the <z>
dial and then pessing the <o><p>
button
2 iages matching your
fied condition, or jump by
the specified amount.
zzTurn the <z> dial to view only images
matching the condition or jump by the
specified number of images forward or
back.
zzTo cancel this mode, press the <n>
button.
• Turning the <z> dial when browsing images in index display will jump to
the previous or next image according to the jump method chosen in single-
image display. However, if you have chosen [ ] or [ ], the jump method
will be switched to [ ].
184
Browsing and Filtering Images
Movies
Viewing Movie Digest Movies
1 Choose a movie.
zzPress the <n> button, choose
[Movie Digest Playback] on the [1] tab,
and then choose the date.
2 Play the movie.
zzPress the <m> button to start playback.
Still Images
Viewing Individual Images in a Group
together, but they can also be viewed ividully.
1 hoose an image group.
ss the <q><r> buttons or turn the
<7> dial to choose an image labeled
[
], and then press the <m> button.
2 View individual images in the
group.
zzPressing the <q><r> buttons or turning
the <7> dial will display only images in
the group.
zzPressing the < > button will display
[Display all images]. Press <m> to
cancel group playback.
185
Browsing and Filtering Images
• During group playback (step 2), you can browse through images quickly
in a group at once or add them to a photobook by choosing [All Images in
• To ungroup images so that you can view them individually, press the
<n> button, choose [Group Images] on the [1] tab, and then choose
individual playback.
186
Editing Face ID Information
If you notice that a name is incorrect during playback, you can change it or
erase it.
However, you cannot add names for people who are not detected by Face
ID (names are not displayed), and for people whose names have been
erased.
Changing Names
1 Access the setting screen.
zzPress the <n> button and choose
zzPress the <o><p> buttons or turn the
<7> dial to choose [Edit ID Info], and
then press the <m> button.
2 Choose an image.
choose an mage and press the <m>
bu
onge frame is displayed around the
ected face. When multiple names are
displayed in an image, press the <q><r>
buttons or turn the <7> dial to choose
the name to change, and then press the
<m> button.
3 Choose the item to edit.
zzPress the <o><p><q><r> buttons or
turn the <7> dial to choose [Overwrite],
and then press the <m> button.
187
Image Viewing Options
Still Images
Magnifying Images
1 Magnify an image.
zzMoving the zoom lever toward <k> will
zoom in and magnify the image. You
can magnify images up to about 10x by
continuing to hold the zoom lever.
zzTo zoom out, move the zoom lever
toward <g>. You can return to single-
image display by continuing to hold it.
2 Move the display position and
switch images as needed.
zzTo move the display position, press the
<o><p><q><r> buttons.
zzTo switch tother images while zoomed,
tur<7dial.
Approximate Position of
Displayed Area
• You can return to single-implay from magnified display by pressing
the <n> butto.
189
Image Viewing Options
Still Images
Movies
Viewing Slideshows
Automatically play back images from a memory card as follows.
1 Access the setting screen.
zzPress the <n> button, and then
choose [Slideshow] on the [1] tab
2 Configure the setting.
zzChoose a menu item to configure, and
3 Start autoatic playback.
zzPress o><p> buttons or turn the
diato choose [Start], and then
he <m> button.
XXThe slideshow will start a few seconds
after [Loading image...] is displayed.
zzPress the <n> button to stop the
slideshow.
during slideshows.
• To pause or resume slideshows, press the <m> button.
• You can switch to other images during playback by pressing the <q><r>
buttons or turning the <7> dial. For fast-forward or fast-rewind, hold the
<q><r> buttons down.
• [Play Time] cannot be modified when [Bubble] is chosen in [Effect].
• You can also start slideshows from single-image display by pressing and
holding the <m> button and immediately pressing the < > button.
190
Image Viewing Options
Still Images
Auto Playback of Similar Images
(Smart Shuffle)
Based on the current image, the camera offers four images similar to it
that you may wish to view. After you choose to view one of those images,
the camera offers four more images. This is an enjoyable way to play back
images in an unexpected order. Try this feature after you have taken many
shots, in many kinds of scenes.
1 Choose Smart Shuffle.
zzPress the <n> button, choose
[Smart Shuffle] on the [1] tab, and then
XXFour candidate images are displayed.
2 Chse aimage.
ess the <o><p><q><r> buttons to
ose the image you want to view next.
XXYour chosen image is displayed in the
center, surrounded by the next four
candidate images.
zzFor full-screen display of the center
image, press the <m> button. To restore
the original display, press the <m>
button again.
zzPress the <n> button to restore
single-image display.
• Only still images shot with this camera are played back using
Smart Shuffle.
• Smart Shuffle is not available in the following cases:
- There are less than 50 shots taken with this camera
- An unsupported image is currently displayed
191
Still Images
Movies
Protecting Images
Protect important images to prevent accidental erasure by the camera
Choosing a Selection Method
1 Access the setting screen.
zzPress the <n> button and choose
2 Choose a selection method.
zzChoose a menu item and a setting as
zzTo return to thmenu screen, press the
<nbutto.
• Protected images on a memory card will be erased if you format
• Protected images cannot be erased using the camera’s erasure function. To
erase them this way, first cancel protection.
192
Protecting Images
Choosing Images Individually
1 Choose [Select].
zzFollowing step 2 above, choose [Select]
and press the <m> button.
2 Choose an image.
zzPress the <q><r> buttons or turn the
<7> dial to choose an image, and then
press the <m> button. [ ] is displayed.
zzTo cancel selection, press the <m>
button again. [ ] is no longer displayed.
zzRepeat this process to specify other
images.
3 Protect the image.
zzPress the n> button. A
coation message is displayed.
esthe <q><r> buttons or turn the
> dial to choose [OK], and then press
e <m> button.
• Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.
193
Protecting Images
Selecting a Range
1 Choose [Select Range].
[Select Range] and press the <m>
button.
2 Choose a starting image.
zzPress the <m> button.
zzPress the <q><r> buttons or turn the
<7> dial to choose an image, and then
press the <mbutton.
3 Choose an ending image.
zzPress the <r> button to choose [Last
image], and then press the <m> button.
zzPress the <q><r> buttons or turn the
<7> dial to choose an image, and then
press the <m> button.
zzImages before the first image cannot be
selected as the last image.
194
Protecting Images
4 Protect the images.
zzPress the <p> button to choose
[Protect], and then press the <m>
button.
• You can also choose the first or last image by turning the <7> dial when the
top screen in steps 2 and 3 is displayed.
Specifying All Images at Once
1 Choose [Select All Images].
[Select All mages] and press the <m>
butto.
2 Proct the images.
ss the <o><p> buttons or turn the
7> dial to choose [Protect], and then
press the <m> button.
• To cancel protection for groups of images, choose [Unlock] in step 4 of
“Selecting a Range” or in step 2 of “Specifying All Images at Once”.
195
Still Images
Movies
Erasing Images
You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered. However, protected
1 Choose an image to erase.
zzPress the <q><r> buttons or turn the
<7> dial to choose an image.
2 Erase the image.
zzPress the <a> button.
zzAfter [Erase?] is displayed, press the
<q><r> buttons or turn the <7> dial to
choose [Erase], and then press the <m>
button.
XXThe current image is now erased.
zzTo cancel easre, press the <q><r>
buttonturn he <7> dial to choose
[Cnceand then press the <m>
.
• Pressing the <a> button while [ ] images are displayed will give you
the option of choosing [Erase
], [Erase JPEG], or [Erase
+JPEG] for
deletion.
196
Erasing Images
Erasing All Images
You can erase all images at once. Be careful when erasing images,
cannot be erased.
Choosing a Selection Method
1 Access the setting screen.
zzPress the <n> button, and then
2 Choose a selection method.
zzChoose a enu item and a setting as
zzTo n to te menu screen, press the
n> button.
Choosing Images Individually
1 Choose [Select].
zzFollowing step 2 above, choose [Select]
and press the <m> button.
2 Choose an image.
choose an image, [ ] is displayed.
zzTo cancel selection, press the <m>
button again. [ ] is no longer displayed.
zzRepeat this process to specify other
images.
197
Erasing Images
3 Erase the image.
zzPress the <n> button. A
confirmation message is displayed.
zzPress the <q><r> buttons or turn the
<7> dial to choose [OK], and then press
the <m> button.
Selecting a Range
1 Choose [Select Range].
[Select Range] and press the <m>
button.
2 Choose imges.
images
3 e the images.
zzPress the <p> button to choose [Erase],
and then press the <m> button.
198
Erasing Images
Specifying All Images at Once
1 Choose [Select All Images].
[Select All Images] and press the <m>
button.
2 Erase the images.
zzPress the <q><r> buttons or turn the
<7> dial to choose [OK], and then press
the <m> button.
199
Still Images
Movies
Rotating Images
Change the orientation of images and save them as follows.
1 Choose [Rotate].
zzPress the <n> button and choose
2 Rotate the image.
zzPress the <q><r> buttons or turn the
<7> dial to choose an image.
zzThe image is rotated 90° each time you
press the <m> button.
zzTo return to thmenu screen, press the
<nbutto.
• Movies with an image qua] or [ ] cannot be rotated.
• Rotation is not possble when uto Rotate] is set to [Off]
200
Rotating Images
Deactivating Auto Rotation
Follow these steps to deactivate automatic rotation by the camera, which
rotates images shot in vertical orientation so they are displayed vertically on
the camera.
zzPress the <n> button, choose [Auto
Rotate] on the [1] tab, and then choose
[Off]. Additionally, images already rotted will be displayed in the
original orientation.
[Off], images shot verticwile displayed vertically, and rotated
images will be displayee rtated orientation.
201
Image Categories
groups. By choosing a category in filtered playback, you can restrict the
following operations to all of those images.
•
Still Images
Movies
Tagging Images as Favorites
1 Choose [Favorites].
zzPress the <n> button and choose
2 Choose an mage.
zzPress t<q><r> buttons or turn the
ial to choose an image, and then
phe <m> button. [ ] is displayed.
zzTo untag the image, press the <m>
button again. [ ] is no longer displayed.
zzRepeat this process to choose additional
images.
3 Finish the setup process.
zzPress the <n> button. A
confirmation message is displayed.
zzPress the <q><r> buttons or turn the
<7> dial to choose [OK], and then press
the <m> button.
• Images will not be tagged as favorites if you switch to Shooting
mode or turn the camera off before finishing the setup process in
step 3.
202
Image Categories
) when
• Favorite images will have a three-star rating (
transferred to computers running Windows 7 or Windows Vista. (Does not
apply to movies or RAW images.)
Still Images
Movies
Organizing Images by Category (My Category)
You can organize images into categories. Note that images are
automatically categorized at the time of shooting, according to shooting
conditions.
:
:
Images with detected faces, or images shot in [I] or [ ] mode.
Images detected as [ ], [ ], or [ ] in <A> mode, or images
shot in [ ] mode.
:
Images shot in [S], [P], or [t] mode.
Choosing a Selection Method
1 Acs the setting screen.
esthe <n> button, and then
ose [My Category] on the [1] tab
2 Choose a selection method.
zzChoose a menu item and a setting as
zzTo return to the menu screen, press the
<n> button.
203
Image Categories
Choosing Images Individually
1 Choose [Select].
[Select] and press the <m> button.
2 Choose an image.
zzPress the <q><r> buttons or turn the
<7> dial to choose an image.
3 Choose a category.
zzPress the <o><p> buttons to choose
a category and then press the <m>
button. [ ] is displayed.
zzTo cancel selection, press the <m>
button again. [ ] is no longer displayed.
zzRepeat this prcess to choose additional
image
4 sh he setup process.
zzhe <n> button. A
confirmation message is displayed. Press
the <q><r> buttons or turn the <7> dial
to choose [OK], and then press the <m>
button.
• Images will not be assigned to a category if you switch to Shooting
mode or turn the camera off before finishing the setup process in
step 4.
204
Image Categories
Selecting a Range
1 Choose [Select Range].
[Select Range] and press the <m>
button.
2 Choose images.
images.
3 Choose a category.
zzPress the <p> button to choose the type
of image, and then press the <q><r>
buttons or turn the <7> dial to choose a
category.
4 Finish tsetup process.
zzPree <p> button to choose [Select],
d ten press the <m> button.
• You can clear the slection of all images in the [Select Range] category by
choosing [Deselect] in stp 4.
205
Editing Still Images
card has sufficient free space.
Still Images
Resizing Images
Save a copy of images at a lower resolution.
1 Choose [Resize].
zzPress the <n> button and choose
2 Choose an image.
zzPress the <q><r> buttons or turn the
<7> dial to choose an image, and then
press the <m> button.
3 Choose an mage size.
zzPress t<q><r> buttons or turn the
diato choose the size, and then
phe <m> button.
XXSave new image?] is displayed.
4 Save the new image.
zzPress the <q><r> buttons or turn the
<7> dial to choose [OK], and then press
the <m> button.
XXThe image is now saved as a new file.
206
Editing Still Images
5 Review the new image.
zzPress the <n> button. [Display new
image?] is displayed.
zzPress the <q><r> buttons or turn the
<7> dial to choose [Yes], and then press
the <m> button.
XXThe saved image is now displayed.
• Editing is not possible for images saved as [ ] in step 3.
• RAW images cannot be edited.
• Images cannot be resized to a higher resolution.
Still Images
Cropping
You can specify a portion of an iage save as a separate image file.
1 oose [Cropping].
zzPress the <n> button, and then
choose [Cropping] on the [1] tab
2 Choose an image.
zzPress the <q><r> buttons or turn the
<7> dial to choose an image, and then
press the <m> button.
207
Editing Still Images
Cropping Area
3 Adjust the cropping area.
XXA frame is displayed around the portion of
the image to be cropped.
XXThe original image is shown in the upper
left, and a preview of the image as
cropped is shown in the lower right.
zzTo resize the frame, move the zoom
lever.
zzTo move the frame, press the
<o><p><q><r> buttons.
Preview of Image After
Cropping
zzTo change the frame orientation, press
the <m> button.
Resolution After Cropping
zzFaces detected in the image are
enclosed in gray frames in the upper-left
image. To crop the image based on this
frame, turn th<7> dial to switch to the
other .
zth<n> button.
4 Saas a new image and
review.
• Editing is not possible for images shot at a resolution of [
]
• RAW images cannot be edited.
• Images supported for cropping will have the same aspect ratio after
cropping.
• Cropped images will have a smaller resolution than uncropped images.
208
Editing Still Images
Still Images
Changing Image Color Tones (My Colors)
You can adjust image colors and then save the edited image as a separate
1 Choose [My Colors].
zzPress the <n> button, and then
choose [My Colors] on the [1] tab
2 Choose an image.
zzPress the <q><r> buttons or turn the
<7> dial to choose an image, and then
press the <m> button.
3 Choose n option.
zzPrehe <q><r> buttons or turn the
<7al to choose an option, and then
ss the <m> button.
4 ave as a new image and
review.
• Image quality of pictures you repeatedly edit this way will be a little
lower each time, and you may not be able to obtain the desired
color.
• Colors of RAW images cannot be edited.
• The color of images edited using this function may vary slightly from the
209
Editing Still Images
Still Images
Correcting Image Brightness (i-Contrast)
Excessively dark image areas (such as faces or backgrounds) can be
detected and automatically adjusted to the optimal brightness. Insufficient
overall image contrast is also automatically corrected, to make subjects
stand out better. Choose from four correction levels, and then save the
image as a separate file.
1 Choose [i-Contrast].
zzPress the <n> button, and then
choose [i-Contrast] on the [1] tab
2 Choose an image.
zzPress the <q><r> buttons or turn the
<7> dial to chose an image, and then
press t<mbutton.
3 osan option.
zzhe <q><r> buttons or turn the
<7> dial to choose an option, and then
press the <m> button.
4 Save as a new image and
review.
• For some images, correction may be inaccurate or may cause
images to appear grainy.
• Images may look grainy after repeated editing using this function.
• RAW images cannot be edited this way.
• If [Auto] does not produce the expected results, try correcting images using
[Low], [Medium], or [High].
210
Editing Still Images
Still Images
Correcting Red-Eye
Automatically corrects images affected by red-eye. You can save the
corrected image as a separate file.
1 Choose [Red-Eye Correction].
zzPress the <n> button, and then
choose [Red-Eye Correction] on the [
]
1
2 Choose an image.
zzPress the <q><r> buttons or turn the
<7> dial to choose an image.
3 Correct the image.
zzPress the <m> button.
XXRee deected by the camera is now
corred, and frames are displayed
uncorrected image areas.
zlarge or reduce images as needed.
4 Save as a new image and
review.
zzPress the <o><p><q><r> buttons or
turn the <7> dial to choose [New File],
and then press the <m> button.
XXThe image is now saved as a new file.
211
Editing Still Images
• Some images may not be corrected accurately.
• To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be
erased.
• Protected images cannot be overwritten.
• RAW images cannot be edited this way.
• Red-eye correction can be applied to JPEG images shot in [ ],
but the original image cannot be overwritten.
212
Movies
Editing Movies
You can cut movies to remove unneeded portions at the beginning or end.
1 Choose [*].
choose [*] and press the <m> button.
XXThe movie editing panel and editing bar
are now displayed.
Movie Editing Panel
2 Specify portions to cut.
zzPress the <o><p> buttons to choose
[
] or [ ].
zzTo view the portions you can cut
(identified by [ ] on the screen), press
the <q><r> buttons or turn the <7>
dial mov[ ]. Cut the beginning of the
morom [ ]) by choosing [ ], and
t the end of the movie by choosing
Movie Editing Bar
].
zzEven if you move [ ] to a position other
than a [ ] mark, choosing [ ] will only
cut the portion from the nearest [ ] to
the left, and choosing [ ] will cut the
portion from the nearest [ ] to the right.
3 Review the edited movie.
zzPress the <o><p> buttons to choose
[
], and then press the <m> button.
The edited movie is now played.
zzTo edit the movie again, repeat step 2.
zzTo cancel editing, press the <o><p>
buttons to choose [ ]. Press the <m>
button, choose [OK] (either press the
<q><r> buttons or turn the <7> dial),
and then press the <m> button again.
213
Editing Movies
4 Save the edited movie.
zzPress the <o><p> buttons to choose
[
], and then press the <m> button.
zzPress the <o><p><q><r> buttons or
turn the <7> dial to choose [New File],
and then press the <m> button.
XXThe movie is now saved as a new file.
• To overwrite the original movie with the cut one, choose
[Overwrite] in step 4. In this case, the original movie will be erased.
• [Overwrite] is only available when memory cards lack sufficient
free space.
• Movies may not be saved if the battery runs out while saving is in
progress.
• When editing movies, you should use a ully charged battery or an
214
Editing Movies
Editing Movie Digest Clips
needed. Be careful when erasing chapters, because they cannot be
recovered.
1 Select the chapter to erase.
to choose a movie recorded in [
]
mode, and then press the <m> button
repeatedly to access the screen at left.
zzChoose the chapter to erase by pressing
the <q><r> buttons or turning the <7>
dial, and then choosing [ ] or [ ].
2 Choose [ ].
ch[ ] ad press the <m> button.
e elected chapter is played back
eatedly.
3 Confirm erasure.
zzPress the <q><r> buttons or turn the
<7> dial to choose [OK], and then press
the <m> button.
XXThe chapter is erased, and the clip is
overwritten.
• [ ] is not displayed if you select a chapter when the camera is connected to
a printer.
215
216
Adjusting Basic Camera Functions
Functions can be configured on the [3] tab. Customize commonly used
Silencing Camera Operations
Silence camera sounds and movies as follows.
zzChoose [Mute], and then choose [On].
• Operation can also be silenced by holding down the <p> button as you turn
the camera on.
restore sound during movies, press tho> buon. Adjust volume with the
<o><p> buttons, as needed.
Adjusting the Volume
Adjust the volume of individuacamera sounds as follows.
zzChoose [Volume], and then press the
<m> button.
zzChoose an item, and then press the
<q><r> buttons to adjust the volume.
218
Adjusting Basic Camera Functions
Customizing Sounds
Customize camera operating sounds as follows.
zzChoose [Sound Options], and then press
the <m> button.
zzChoose an item, and then press the
<q><r> buttons to choose an option.
Preset sounds
1, 2
(cannot be modified)
Preset sounds
3
Can be changed by using the included
software.
changes to [Shutter Sound].
Hiding Hints and Tips
Hints and tips are normally shoen you choose FUNC. menu
information.
zzChoose [Hints & Tips], and then choose
[Off].
219
Adjusting Basic Camera Functions
Date and Time
Adjust the date and time as follows.
1 Access the [Date/Time] screen.
zzChoose [Date/Time], and then press the
<m> button.
2 Configure the setting.
zzPress the <q><r> buttons to choose an
option, and then adjust the setting, either
by pressing the <o><p> buttons or
turning the <7> dial.
World Clock
To ensure that your shots will have the correct loal date and time when you
travel abroad, simply register the destination in vance and switch to that
time zone. This convenient feature eliminthe eed to change the Date/
Time setting manually.
Before using the world clock, be set the date and time and your
1 Specify your destination.
zzChoose [Time Zone], and then press the
<m> button.
zzPress the <o><p> buttons or turn the
<7> dial to choose [ World], and then
press the <m> button.
zzPress the <q><r> buttons or turn the
<7> dial to choose the destination.
zzTo set daylight saving time (1 hour
ahead), press the <o><p> buttons to
choose [ ].
zzPress the <m> button.
220
Adjusting Basic Camera Functions
2 Switch to the destination time
zone.
zzPress the <o><p> buttons or turn the
<7> dial to choose [ World], and then
press the <n> button.
XX[ ] is now shown on the shooting screen
update your [
Home] time and date.
Screen Brightness
Adjust screen brightness as follows.
zzChoose [LD Brightness], and then
prehe <><r> buttons to adjust the
brigss.
• For maximum brightness, press and hold the <p> button for at least one
second when the shooting screen is displayed or when in single-image
display. (This will override the [LCD Brightness] setting on the [3] tab.) To
restore the original brightness, press and hold the <p> button again for at
least one second or restart the camera.
221
Adjusting Basic Camera Functions
Start-up Screen
Customize the start-up screen shown after you turn the camera on as
follows.
zzChoose [Start-up Image], and then press
the <m> button.
zzPress the <q><r> buttons or turn the
<7> dial to choose an option.
No start-up image
Preset image
1, 2
(cannot be modified)
Preset image
3
Assign a desired shot, or use the
included software to change the image.
Customizing the Start-up Scre
1 Accesthe [Start-up Image]
n in Playback mode.
zzPrthe <1> button.
zzFollowing the previous procedure, choose
[3] and press the <m> button.
2 Choose one of your shots.
zzChoose an image and press the <m>
button. After [Register?] is displayed,
choose [OK] (either press the <q><r>
buttons or turn the <7> dial), and then
press the <m> button.
• The previous start-up setting is overwritten when you assign a new
start-up image.
222
Adjusting Basic Camera Functions
• You can assign the operating sounds and start-up image for your camera
Formatting Memory Cards
Before using a new memory card or a card formatted in another device, you
should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy
images on the memory card to a computer, or take other steps to back them
up.
formatting an Eye-Fi card, install the software on a computer.
1 Access the [Format] screen.
zzChoose [Format], and then press the
<m> buttn.
2 Choose OK].
zzPrehe <o><p> buttons to choose
ancel], choose [OK] (either press the
><r> buttons or turn the <7> dial),
and then press the <m> button.
3 Format the memory card.
zzTo begin the formatting process, press
the <o><p> buttons or turn the <7>
dial to choose [OK], and then press the
<m> button.
zzWhen formatting is finished, [Memory
card formatting complete] is displayed.
Press the <m> button.
• Formatting or erasing data on a memory card only changes file
management information on the card and does not erase the data
completely. When transferring or disposing of memory cards, take
steps to protect personal information if necessary, as by physically
destroying cards.
223
Adjusting Basic Camera Functions
• The total card capacity indicated on the formatting screen may be less than
the advertised capacity.
Low-Level Formatting
Perform low-level formatting in these cases: [Memory card error] is
displayed, the camera is not working correctly, card image reading/writing is
slower, continuous shooting is slower, or movie recording suddenly stops.
Low-level formatting erases all data on a memory card. Before low-level
formatting, copy images on the memory card to a computer, or take other
steps to back them up.
Perform low-level formatting.
press the <o><p> buttons or turn the
<7> dial to choose [Low Level Format],
and then selecthis option (mark with a
[
]) bessig the <q><r> buttons.
e frmatting process.
card.
• You can cancel low-level formatting in progress by choosing [Stop]. In this
case, all data will be erased, but the memory card can be used normally.
224
Adjusting Basic Camera Functions
File Numbering
Your shots are automatically numbered in sequential order (0001 – 9999)
and saved in folders that store up to 2,000 images each. You can change
how the camera assigns file numbers.
zzChoose [File Numbering], and then
choose an option.
Images are numbered
consecutively (until the 9999th
shot is taken/saved) even if
Continuous
you switch memory cards.
Image numbering is reset to
0001 if you switch memory
Auto Reset
cards, or when a new folder is
created.
• Regardless of the option selected is seng, shots may be numbered
consecutively after the last numbexisting images on newly inserted
memory cards. To start saots rom 0001, use an empty (or formatted
structure and image orms.
Date-Based Image Storage
Instead of saving images in folders created each month, you can have the
camera create folders each day you shoot to store shots taken that day.
zzChoose [Create Folder], and then choose
[Daily].
XXImages will now be saved in folders
created on the shooting date.
225
Adjusting Basic Camera Functions
Lens Retraction Timing
The lens is normally retracted for safety about one minute after you press
immediately after you press the <1> button, set the retraction timing to
[0 sec.].
zzChoose [Lens Retract], and then choose
[0 sec.].
Power-Saving Adjustment
Adjust the timing of automatic camera ancreedeactivation (Auto Power
1 ss the [Power Saving]
screen.
zzChoose [Power Saving], and then press
the <m> button.
2 Configure the settings.
zzAfter choosing an item, press the
<q><r> buttons to adjust it as needed.
• To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
• The [Display Off] setting is applied even if you set [Auto Power Down] to
[Off].
226
Adjusting Basic Camera Functions
Electronic Level Calibration
Calibrate the electronic level if it seems ineffective in helping you level the
camera.
1 Make sure the camera is level.
zzPlace the camera on a flat surface, such
as a table.
2 Access the [Electronic Level]
screen.
zzChoose [Electronic Level], and then press
the <m> button.
3 Calibrate the electronic level.
zzTo adjust left/right tilt, choose [Horizontal
Roll Calibratio], and to adjust forward/
backward tilt, oose [Vertical Pitch
Calibr, follwed by the <m> button.
firation message is displayed.
zze [OK], and then press the <m>
button.
Resetting the Electronic Level
Restore the electronic level to its original state as follows. Note that this is
not possible unless you have calibrated the electronic level.
zzChoose [Electronic Level], and then press
the <m> button.
zzChoose [Reset], and then press the
<m> button.
XXOnce the electronic level has been reset,
the menu screen is displayed again.
228
Adjusting Basic Camera Functions
Setting Copyright Information to Record in
Images
To record the author’s name and copyright details in images, set this
information beforehand as follows.
1 Access the setting screen.
zzChoose [Copyright Info], and then press
the <m> button.
zzPress the <o><p> buttons or turn
the <7> dial to choose [Enter Author’s
Name] or [Enter Copyright Details], and
then press the <m> button.
2 Enter a name.
zzPress the o><p><q><r> buttons or
turn the <> dial to choose a character,
ann pres the <m> button to enter
to 63 characters can be used.
zzPress the <a> button to delete single
characters.
zzTurn the <z> dial or choose [ ] or
[
] and press the <m> button to move
the cursor.
3 Save the settings.
zzPress the <n> button. [Accept
changes?] is displayed.
zzPress the <q><r> buttons or turn the
<7> dial to choose [Yes], and then press
the <m> button.
XXThe information set here will now be
recorded in images.
229
Adjusting Basic Camera Functions
• To check the information entered, choose [Display Copyright Info] on the
screen in step 1, and then press the <m> button.
delete copyright information. Some characters entered with the included
software may not display on the camera, but will be correctly recorded in
images.
• You can view, change, and delete copyright information recorded in images
by using the included software to save images to a computer.
Deleting All Copyright Information
You can delete both the author’s name and copyright details at the same
time as follows.
[Delete Copyright Info].
zzPress the <q><r> buttons or turn the
<7> dial to cose [OK], and then press
the <utton
• The copyright info alreadrecrded in images will not be deleted.
Checking Certification Logos
Some logos for certification requirements met by the camera can be viewed
on the screen. Other certification logos are printed in this guide, on the
camera packaging, or on the camera body.
zzChoose [Certification Logo Display], and
then press the <m> button.
230
Adjusting Basic Camera Functions
Display Language
Change the display language as needed.
1 Access the [Language] screen.
zzChoose [Language ], and then press
the <m> button.
2 Configure the setting.
zzPress the <o><p><q><r> buttons or
turn the <7> dial to choose a language,
and then press the <m> button.
• You can also access the [Language] screen in Playback mode by pressing
and holding the <m> button and immediately pressing the <n> button.
Adjusting Other Settings
The following settings can also be add on he [3] tab.
•
•
•
Restoring Defaults
If you accidentally change a setting, you can restore default camera
settings.
1 Access the [Reset All] screen.
zzChoose [Reset All], and then press the
<m> button.
2 Restore default settings.
zzPress the <q><r> buttons or turn the
<7> dial to choose [OK], and then press
the <m> button.
XXDefault settings are now restored.
231
Adjusting Basic Camera Functions
• The following functions are not restored to default settings.
232
Tips on Using Included Accessories
Effective Battery and Charger Use
• Charge the battery on (or immediately before) the
day of use
Charged batteries gradually lose their charge, even when
they are not used.
You can easily check the charge state of the battery by
attaching the cover so that is visible on a charged
battery, and attaching it so that is not visible on an
uncharged battery.
• Long-term battery storage
After using up all remaining battery power, remove the battery from the camera. Store
the battery with the cover attached. Storing a partially charged battery over extended
periods (about a year) may shorten its life or affect performance.
• Using the battery charger abroad
The charger can be used in areas with 100 – 240 V AC power (50/60 Hz). For power
outlets in a different format, use a commercially availale adapter for the plug. Never
use an electrical transformer designed for travelingwch may damage the battery.
234
Optional Accessories
The following camera accessories are sold separately. Note that availability
varies by area, and some accessories may no longer be available.
Power Supplies
Battery Pack NB-10L
zzRechargeable lithium-ion battery
Battery Charger CB-2LC/CB-2LCE
zzCharger for Battery Pack NB-10L
AC Adapter Kit ACK-DC80
zzFor powering the camera using
household power. Recommended when
using the camera over extended periods,
or when connecting the camera to a
printer or cmputer. Cannot be used to
charge the amera battery.
• The battery charger anadpter kit can be used in areas with
100 – 240 V AC ower Hz).
• For power outletin a different format, use a commercially
available adapter for the plug. Never use an electrical transformer
designed for traveling, which may damage the battery.
Flash Units
High-Power Flash HF-DC2
zzExternal flash for illuminating subjects
that are out of range of the built-in flash.
High-Power Flash HF-DC1 can also be
used.
Speedlite 600EX-RT, 600EX,
580EX II, 430EX II, 320EX, 270EX II
zzShoe-mounted flash unit that enables
many styles of flash photography.
Speedlite 580EX, 430EX, 270EX, and
220EX are also supported.
235
Optional Accessories
Speedlite Bracket SB-E2
zzPrevents unnatural shadows next to
subjects during vertical shooting. Includes
Off-Camera Shoe Cord OC-E3.
Speedlite Transmitter ST-E2
zzEnables wireless control of slave
Speedlite flash units (except Speedlite
270EX/220EX).
Macro Twin Lite MT-24EX
Macro Ring Lite MR-14EX
zzRequires Conversion Lens Adapter
LA-DC58L, Off-Camera Shoe Cord
OC-E3, and Backet BKT-DC1 (all sold
separ) for ttachment to the camera.
RquirConversion Lens Adapter
58L (sold separately) for
ament to the camera.
Off-Camera Shoe Cord OC-E3
zzUsed to attach a Macro Twin Lite flash to
the camera.
Bracket BKT-DC1
zzUsed to attach a Macro Twin Lite flash to
the camera.
236
Optional Accessories
Other Accessories
Soft Case SC-DC85
zzProtects the camera from dust and
scratches.
Handle with care to prevent leather
discoloration.
Waterproof Case WP-DC48
zzFor underwater photography at depths of
up to 40 meters (130 ft.). Also useful for
shooting in the rain, at the beach, or on
ski slopes.
Interface Cable IFC-400PCU
zzFor connecing the camera to a computer
or er.
eo AV Cable AVC-DC400ST
zzConnect the camera to a TV to enjoy
playback on the larger TV screen.
HDMI Cable HTC-100
zzFor connecting the camera to an HDMI
input of a high-definition TV.
Tele-converter TC-DC58E
zzOptional lens attached to the camera to
increase the focal length by a factor of
approximately 1.4x. (Includes lens hood.)
237
Optional Accessories
Conversion Lens Adapter
LA-DC58L
zzAdapter required to attach the Tele-
converter or Macro Ring Lite/Macro Twin
Lite flash to the camera.
Remote Switch RS-60E3
zzEnables remote shutter button operation
(pressing the button halfway or all the
way down).
Filter Adapter FA-DC58D
zzAdapter required when mounting a 58
mm filter.
Canon s Flter (58 mm dia.)
zts he lens and enables a variety of
sg effects.
Printers
Canon PictBridge-Compatible
Printers
zzPrinting images without a computer is
possible by connecting the camera to a
Canon PictBridge-compatible printer.
For details, visit your nearest Canon
dealer.
238
Still Images
Movies
Movies
Using Optional Accessories
Still Images
Playback on a TV
By connecting the camera to a TV, you can view your shots on the larger
screen of the TV.
For details on connection or how to switch inputs, refer to the TV manual.
Still Images
Movies
Playback on a High-Definition TV
Connecting the camera to an HDTV with the HDMI Cable HTC-100 (sold
separately) enables you to view your shots on the larger screen of the TV.
Movies shot at a resolution of [ ] or [ ] can be viewed in high-definition.
1 Make sue the camera and TV
are f.
2 nnect the camera to the TV.
zzOn the TV, insert the cable plug fully into
the HDMI input as shown.
zzOn the camera, open the terminal cover
and insert the cable plug fully into the
camera terminal.
239
Using Optional Accessories
3 Turn the TV on and switch to
video input.
zzSwitch the TV input to the video input you
connected the cable to in step 2.
4 Turn the camera on.
zzPress the <1> button to turn the camera
on.
XXImages from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
zzWhen finished, turn off the camera and
TV before disconnecting the cable.
• It is not possible to connect the USB cabe or an optional stereo
AV cable at the same time as an HDMCable HTC-100. Forcing
the cables into the camera at the me time may damage the
camera or cables.
• Camera operating souds are nyed while the camera is connected to
an HDTV.
240
Using Optional Accessories
Still Images
Movies
Controlling the Camera with a TV Remote
Connecting the camera to an HDMI CEC-compatible TV enables playback
(including slideshow playback) using the TV remote control.
In this case, you will need to adjust some TV settings. For details, refer to
the TV user manual.
1 Configure the setting.
zzPress the <n> button, choose
[Ctrl via HDMI] on the [3] tab, and then
2 Connect the camera to the TV.
the era tthe TV.
3 spay images.
zrn on the TV. On the camera, press the
<1> button.
XXImages from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
4 Control the camera with the TV
remote.
zzPress the <q><r> buttons on the remote
to browse images.
zzTo display the camera control panel,
press the OK/Select button. Select
control panel items by pressing the
<q><r> buttons to choose an item, and
then pressing the OK/Select button again.
241
Using Optional Accessories
Camera Control Panel Options Shown on the TV
Return
Closes the menu.
(Only displayed when a grouped image is selected.)
Group Playback
Starts movie playback. (Only displayed when a movie
is selected.)
Play Movie
Slideshow
Starts slideshow playback. To switch images during
playback, press the <q><r> buttons on the remote
control.
.
Index Playback
Change Display
Displays multiple images in an index.
l
• Pressing the <n> button on the camera will switch control to the
camera itself, which will prevent remote contrountil you return to single-
image display.
• The camera may not always respond ctly een if the remote is for an
HDMI CEC-compatible TV.
242
Using Optional Accessories
Still Images
Movies
Playback on a Standard-Definition TV
Connecting the camera to a TV with the Stereo AV Cable AVC-DC400ST
(sold separately) enables you to view your shots on the larger screen of the
TV as you control the camera.
1 Make sure the camera and TV
are off.
White
2 Connect the camera to the TV.
Red
Yellow
Yellow
zzOn the TV, insert the cable plugs fully into
the video inputs as shown.
Red
White
zzOn the caera, open the terminal cover
anert thcable plug fully into the
ama terminal.
3 splay images.
images.
• Correct display is not possible unless the camera video output
format (NTSC or PAL) matches the TV format. To change the
video output format, press the <n> button and choose [Video
System] on the [3] tab.
• When the camera and TV are connected, you can also shoot while
previewing shots on the larger screen of the TV. To shoot, follow the same
243
Using Optional Accessories
Still Images
Movies
Powering the Camera with Household Power
Powering the camera with AC Adapter Kit ACK-DC80 (sold separately)
eliminates the need to monitor the remaining battery level.
1 Make sure the camera is off.
2 Connect the adapter to the
coupler.
zzInsert the adapter plug fully into the
coupler.
3 Insert the coupler.
cover, and theinsert the coupler as
shown it loks into place.
zzLower the cover ( ), keeping the coupler
cable in the coupler cable port ( ).
zzSlide the cover ( ) until it clicks into
place.
Coupler Cable Port
244
Using Optional Accessories
4 Connect the power cord.
zzInsert one end of the power cord into the
compact power adapter, and then plug
the other end into a power outlet.
zzTurn the camera on and use it as desired.
zzWhen finished, turn the camera off and
unplug the power cord from the outlet.
• Do not disconnect the adapter or unplug the power cord while
the camera is still on. This may erase your shots or damage the
camera.
• Do not attach the adapter or adapter cord to other objects. Doing
so could result in malfunction or damage to the product.
Still Images
Movies
Using a Tele-converter (Sod Separately)
Attaching Tele-converter TC-DC58E aConversion Lens Adapter
LA-DC58L (both sold separateabls you to use a focal length of 1.4x.
1 Remove the ring.
zzMake sure the camera is off.
zzHold down the ring release button (
)
and turn the ring in the direction of the
arrow ( ).
○
●
zzAlign the mark on the ring with the
mark on the camera, and then lift the
ring off.
245
Using Optional Accessories
2 Attach the conversion lens
adapter.
●
zzAlign the mark on the conversion lens
●
adapter with the mark on the camera,
and then turn the adapter in the direction
of the arrows until it locks.
zzTo remove the adapter, hold down the
ring release button and turn the adapter
in the opposite direction.
3 Attach the tele-converter lens.
zzTurn the lens in the direction of the arrow
to attach it securely to the camera.
4 ify the converter in the
cra settings.
zzTurn the camera on.
zzPress the <n> button and choose
[Converter] on the [4] tab. Press the
<q><r> buttons to choose [TC-DC58E].
zzThere is no need to adjust the converter
setting when [IS Mode] is set to [Off].
zzAfter removing the converter, always
return the converter setting to [None].
246
Using Optional Accessories
• Vignetting may occur (especially in the lower right) when the built-
in flash is used.
• Set the camera to maximum telephoto when using the tele-
converter. At other zoom positions, vignetting may occur.
• Use the LCD monitor to compose shots. The view through the
viewfinder may be partially obstructed by vignetting.
• Before use, remove all dust or debris from the conversion lens
with a lens blower brush.
• Stitching multiple images together accurately with the included
software is not possible when shooting in [x] or [v] mode
Still Images
Movies
Using a Lens Hood
Attaching the lens hood included with Tele-coverter TC-DC58E (sold
separately) can reduce the effect of extraneos light outside the angle of
view when shooting backlit subjects, en te camera is aimed toward a
bright light source.
Ach the lens hood.
zzFit the lens hood over the tele-converter
as shown and attach it securely.
zzWhen the lens hood will not be used,
attach it inverted.
• Vignetting may occur if you use the built-in flash when the lens
hood is attached.
247
Using Optional Accessories
Still Images
Movies
Using Lens Filters (Sold Separately)
Attaching a lens filter to the camera protects the lens and allows you to
shoot with various effects. To attach a lens filter, you will need Filter Adapter
FA-DC58D (sold separately).
1 Remove the ring.
ring.
2 Attach the filter adapter.
●
zzAlign the mark on the filter adapter with
●
the mark on the camera, and then turn
the adapter in the direction of the arrows
until it locks in place.
zzTo remove the adapter, turn off the
cameraold dwn the ring release
button, turn he adapter in the
ite direction.
3 Ach a filter.
zzAttach the filter to the camera in the
direction of the arrow.
• We recommend the use of genuine Canon filters (58 mm dia.).
• When not using auto focus to shoot, set the manual focus option
[Safety MF] to [On].
• If you use the built-in flash with the filter adapter attached, portions
of the image may appear darker.
• When using the filter adapter, be sure to use only one filter at a
time. Attaching multiple filters, or accessories such as a heavy
lens, may cause the attachments to fall off and become damaged.
• Do not grip the filter adapter tightly.
• Remove the filter adapter when not using a filter.
248
Using Optional Accessories
• The filter adapter and a lens hood cannot be attached to the camera at the
same time.
Still Images
Using a Remote Switch (Sold Separately)
An optional Remote Switch RS-60E3 can be used to avoid camera shake
that may otherwise occur when pressing the shutter button directly. This
optional accessory is convenient when shooting at slow shutter speeds.
1 Connect the remote switch.
zzMake sure the camera is off.
zzOpen the terminal cover and insert the
remote switch plug.
2 oot.
zzTo shoot, press the release button on the
remote switch.
• Bulb photography (long exposures) is not supported.
249
Using Optional Accessories
Still Images
Movies
Using an External Flash (Sold Separately)
More sophisticated flash photography is possible with an optional Speedlite
EX series flash. For movie shooting using an LED light, the optional
Speedlite 320EX flash is available.
• This camera does not support some Speedlite EX series functions.
• Wireless operation of the Speedlite 600EX-RT is not supported.
• Non-EX series Canon flash units may not fire correctly or may not
fire at all, in some cases.
• Use of non-Canon flash units (especially high-voltage flash units)
or flash accessories may prevent normal camera operation and
may damage the camera.
• Also refer to the Speedlite EX series manual for additional information.
Still Iages
Movies
Speedlite EX Series
These optional flash units cn proviight lighting and meet a variety of
flash photography needs.
1 Attach the flash unit to the hot
shoe.
2 Turn the flash on, and then turn
the camera on.
XXA red [h] icon is now displayed.
XXThe flash pilot lamp will light up when the
flash is ready.
250
Using Optional Accessories
3 Choose shooting mode <G>,
<M>, <B>, or <D>.
zzFlash settings can only be configured in
these modes. In other modes, the flash
is adjusted and fired automatically, as
needed.
4 Set the white balance to [h]
5 Configure the external flash.
zzPress the <n> button, choose [Flash
Control] on the [4] tab, and then press
the <m> button.
XXOptions already set on the flash itself are
displayed.
zzPresthe o><p> buttons or turn
the > dial to choose an item, and
en djust the setting by pressing the
><r> buttons.
zzAvailable settings vary depending on the
shooting mode and the flash attached
• Settings for the built-in flash cannot be configured while a Speedlite EX
series flash is attached, because that setting screen is no longer accessible.
• You can also access the setting screen by pressing the <r> button for at
least one second.
• Flash settings in [ ] shooting mode can be configured just as they are in
<G> mode.
• 600EX-RT/580EX II only: [Flash Control] is not available if the external flash
has been set up for stroboscopic flash.
• 320EX only: Auto LED lighting is only available in low-light movie recording
or in Movie mode. In this case, the [ ] icon is shown.
251
Using Optional Accessories
Still Images
Movies
Using Speedlite Bracket SB-E2 (Sold Separately)
zzUsing the optional Speedlite Bracket
SB-E2 can help prevent unnatural
shadows next to subjects during vertical
shooting.
Still Images
Macro Ring Lite MR-14EX
These optional flash units enable many styles of macro flash photography.
Requires Conversion Lens Adapter LA-DC58L (sold separately) for
attachment to the camera.
1 Prepthe conversion lens
Back
Section Section
Front
pt.
zzthe conversion lens adapter in
the direction indicated by the arrow to
separate the front and back sections.
zzOnly the back section is used to attach
the Macro Ring Lite MR-14EX or Macro
Twin Lite MT-24EX.
Attach
Detach
Attach to camera
2 Remove the ring.
zzMake sure the camera is off.
zzHold down the ring release button (
)
and turn the ring in the direction of the
arrow ( ).
252
Using Optional Accessories
●
zzAlign the
○
mark on the ring with the
mark on the camera, and then lift the
ring off.
3 Attach the back section of the
conversion lens adapter.
●
zzAlign the mark on the back section with
●
the mark on the camera, and then turn
the adapter in the direction of the arrows
until it locks in place.
zzTo remove the adapter, hold down the
ring release button and turn the adapter
in the opposite direction.
4 Atth the controller to the
cara.
ach the control component of the
cro ring lite to the hot shoe on top of
the camera.
5 Attach the flash unit to the
conversion lens adapter.
zzPress the release buttons on both sides
of the macro ring lite in and attach the
macro ring lite to the conversion lens
adapter.
6 Choose shooting mode <G>,
<M>, <B>, or <D>.
zzFlash settings can only be configured in
these modes. In other modes, the flash
is adjusted and fired automatically, as
needed.
253
Using Optional Accessories
7 Set the white balance to [h]
10 Configure the external flash.
settings.
• Keep the macro ring lite cord away from flash heads.
• When using a tripod, adjust the position of the legs to prevent
them from coming into contact with the flash heads or the bracket.
• Use the screen to compose shots, because the viewfinder cannot
be used with these accessories attached.
Macro Twin Lite MT‑24EX
These optional flash units enable many sts of macro flash photography.
Requires the Conversion Lens AdA-DC58L, Off-Camera Shoe Cord
OC-E3, and Bracket BKT-D1 (all eparately) for attachment to the
camera.
1 Remove the ring and attach the
back section of the conversion
lens adapter.
remove the ring, and then attach the back
section of the conversion lens adapter.
2 Attach the off-camera shoe cord
to the bracket.
z Slide the bracket screw to the outer end
of the bracket. Align the bracket screw
with the tripod socket of the off-camera
shoe cord, and then tighten the screw to
secure it.
254
Using Optional Accessories
3 Attach the bracket to the
camera.
zzSlide the other bracket screw to the outer
end of the bracket. Align the bracket
screw with the tripod socket on the
bottom of the camera, and then tighten
the screw to secure it.
4 Attach the off-camera shoe cord
to the camera.
zzAttach the camera connection component
of the off-camera shoe cord to the hot
shoe on toof the camera.
5 Atth the controller to the off-
mera shoe cord.
zzAttach the controller for the macro twin
lite to the flash connection component of
the off-camera shoe cord.
6 Attach the flash unit to the
conversion lens adapter.
zzAttach each flash head to the respective
mount ( ). Press the release button on
the top of the ring in and attach the ring to
the conversion lens adapter ( ).
255
Using Optional Accessories
7 Configure the external flash and
settings on the camera.
configure the setting.
• Keep cords (from the macro twin lite or the off-camera shoe cord)
away from flash heads.
• When using a tripod, adjust the position of the legs to prevent
them from coming into contact with the flash heads or the bracket.
• Use the screen to compose shots, because the viewfinder cannot
be used with these accessories attached.
256
Using Optional Accessories
Still Images
Camera Settings Available with an External Flash
(Sold Separately)
The following settings are available in <G>, <M>, <B>, or <D> mode.
In other shooting modes, only [Red-Eye Corr.] and [Red-Eye Lamp] can
be configured. (With autoflash control, the flash always fires.) However,
external flash units do not fire in modes that the built-in flash does not fire
Shooting Mode
Item
Options
G M B D
Auto*1
Manual*2
O
O
O
O
O
O
–
O
–
Flash Mode
Flash Exp. Comp*3
–3 to +3
O
O
O
Flash Output*4
Shutter Sync.
1/128*5 to 1/1 (in 1/3-stop inrements)
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
–
1st-curtain/2nd-curtain/Hi-ed
On
Slow Synchro
Off
Wireless Func.*6
Red-Eye Corr.
Red-Eye Lamp
On/Off
On/Off
On/Off
On
O
O
O
O
O
O
O
O
O
–
Safety FE*7
Off
O
O
Clear Flash Settings*8
*1E-TTL mode is used for the flash.
*2M mode is used for the flash.
In [D] shooting mode, E-TTL mode is also available for the flash. In this case, when
the flash fires, flash exposure compensation set on the flash is applied to the flash
output level set on the camera.
*3Can be configured only when [Flash Mode] is [Auto] and flash exposure
compensation set on the flash is [+0]. When you adjust flash exposure compensation
on 600EX-RT, 600EX, 580EX II, or 430EX II Speedlites, the camera display will be
updated accordingly.
*4Can be configured when [Flash Mode] is [Manual]. Linked to settings on the flash
unit.
*51/64 for Speedlite 430EX II/430EX/320EX/270EX II/270EX, Macro Ring Lite
MR-14EX, and Macro Twin Lite MT-24EX.
257
Using Optional Accessories
*6For options other than On/Off, configure the setting on the flash unit itself. Not
available with Speedlite 430EX II/320EX/270EX II/270EX, Macro Ring Lite MR-14EX,
or Macro Twin Lite MT-24EX. When this setting is set to [On], [Shutter Sync.] cannot
be set to [2nd-curtain]. (If [Shutter Sync.] is set to [2nd-curtain], it will be changed to
[1st-curtain].)
*7Can only be configured when [Flash Mode] is [Auto].
*8Restores all default settings. You can also restore defaults for [Slow Synchro], [Safety
FE], [Red-Eye Corr.], and [Red-Eye Lamp] by using [Reset All] in the [3] menu on
• Flash settings in [ ] shooting mode can be configured just as they are in
<G> mode.
• In <A> shooting mode, icons representing Smiling, Sleeping, Babies
(Smiling), Babies (Sleeping), and Children shooting scenes determined by
the camera are not displayed, and the camera does not shoot continuously
258
Still Images
Movies
Printing Images
Your shots can easily be printed by connecting the camera to a printer. On
the camera, you can specify images to set up batch printing, prepare orders
for photo development services, and prepare orders or print images for
photobooks.
A Canon SELPHY CP series compact photo printer is used here for the
sake of illustration. Screens displayed and available functions vary by
printer. Also refer to the printer manual for additional information.
Still Images
Easy Print
Easily print your shots by connecting the camera to a PictBridge-compatible
printer (sold separately) with the USB cable.
1 Make sure the camera and
printer are off.
2 Connect he camera to the
prr.
pethe cover. Holding the smaller
le plug in the orientation shown, insert
e plug fully into the camera terminal.
zzConnect the larger cable plug to the
printer. For other connection details, refer
to the printer manual.
3 Turn the printer on.
4 Turn the camera on.
zzPress the <1> button to turn the camera
on.
259
Printing Images
XX[
] is displayed.
5 Choose an image.
zzPress the <q><r> buttons or turn the
<7> dial to choose an image.
6 Print the image.
zzPress the <c> button.
XXPrinting now begins.
zzTo print other images, repeat steps 5 – 6
after printing ifinished.
zzWhen are fiished printing, turn the
ra nd printer off and disconnect the
ce cable.
• RAW images cannot be printed.
260
Printing Images
Still Images
Configuring Print Settings
1 Access the printing screen.
<m> button to access the screen at left.
2 Configure the settings.
zzPress the <o><p> buttons or turn
the <7> dial to choose an item, and
then choose an option by pressing the
<q><r> buttons.
Default
Date
Matches current printer settings.
Prints images with the date added.
Prints images with thfile number added.
Prints imagh botthe date and file number added.
–
File No.
Both
Off
Default
Off
Matcrenprinter settings.
–
Useinformation from the time of shooting to print under
optimal settings.
On
Red-Eye 1 Corrects red-eye.
No. of Copies Choose the number of copies to print.
–
Cropping
Paper
Settings
Specify the paper size, layout, and other details
–
261
Printing Images
Still Images
Cropping Images Before Printing (Cropping)
By cropping images before printing, you can print a desired image area
instead of the entire image.
1 Choose [Cropping].
access the printing screen, choose
[Cropping] and press the <m> button.
XXA cropping frame is now displayed,
indicating the image area to print.
2 Adjust the cropping frame as
needed.
zzTo resize the fame, move the zoom
lever.
zzTo movhe frame, press the
p<q><r> buttons.
zzTte the frame, turn the <7> dial.
zzWhen finished, press the <m> button.
3 Print the image.
zzOn the screen in step 1, press the
<o><p> buttons or turn the <7> dial to
choose [Print], and then press the <m>
button.
• Cropping may not be possible at small image sizes, or at some
aspect ratios.
• Dates may not be printed correctly if you crop images shot with
[Date Stamp] selected.
262
Printing Images
Still Images
Choosing Paper Size and Layout Before Printing
1 Choose [Paper Settings].
access the printing screen, choose
[Paper Settings] and press the <m>
button.
2 Choose a paper size.
zzPress the <o><p> buttons or turn the
<7> dial to choose an option, and then
press the <m> button.
3 hose a type of paper.
ss the <o><p> buttons or turn the
<7> dial to choose an option, and then
press the <m> button.
4 Choose a layout.
zzPress the <o><p> buttons or turn the
<7> dial to choose an option.
zzWhen choosing [N-up], press the
<q><r> buttons to specify the number of
images per sheet.
zzPress the <m> button.
5 Print the image.
263
Printing Images
Available Layout Options
Default
Matches current printer settings.
Bordered
Borderless
N-up
Prints with blank space around the image.
Borderless, edge-to-edge printing.
Choose how many images to print per sheet.
Prints images for identification purposes.
ID Photo
Only available for images with a resolution of L and an aspect ratio of
4:3.
Choose the print size.
Choose from 3.5 x 5 in., postcard, or wide-format prints.
Fixed Size
Still Images
Printing ID Photos
1 Choose [ID Photo].
[ID Phand ress the <m> button.
2 osthe long and short side
lh.
zzPress the <o><p> buttons or turn the
<7> dial to choose an item. Choose the
length by pressing the <q><r> buttons,
and then press the <m> button.
3 Choose the printing area.
printing area.
4 Print the image.
264
Printing Images
Movies
Printing Movie Scenes
1 Access the printing screen.
to choose a movie, and then press the
<m> button.
zzPress the <q><r> buttons or turn the
<7> dial to choose [c], and then press
the <m> button. The screen at left is
displayed.
2 Choose a printing method.
zzPress the <o><p> buttons or turn
the <7> dial to choose [ ], and then
press the <q><r> buttons to choose the
printing mhod.
3 Prithe image.
Movie Printing Otions
Single
Prints the currnt sene as a still image.
Prints a series of scenes, a certain interval apart, on a single sheet of
paper. You can also print the folder number, file number, and elapsed
time for the frame by setting [Caption] to [On].
Sequence
• To cancel printing in progress, press the <m> button.
• [ID Photo] and [Sequence] cannot be chosen on Canon PictBridge-
compatible printers from CP720/CP730 and earlier models.
265
Printing Images
Still Images
Adding Images to the Print List (DPOF)
service can be set up on the camera. Choose up to 998 images on a
memory card and configure relevant settings, such as the number of copies,
as follows. The printing information you prepare this way will conform to
DPOF (Digital Print Order Format) standards.
• RAW images cannot be included in print list.
Still Images
Adding Images to the Print List via the <c> Button
You can add images to the print list (DPOF) during playback simply by
pressing the <c> button.
1 Choosan mage.
zzPrss t<q><r> buttons or turn the
ial to choose an image.
2 Add the image to the print list.
zzPress the <c> button.
zzPress the <o><p> buttons to specify
the number of prints. Choose [Add] by
pressing the <q><r> buttons or turning
the <7> dial, and then press the <m>
button.
zzTo remove the image from the print list,
repeat steps 1 – 2 but choose [Remove]
by pressing the <q><r> buttons or
turning the <7> dial, and then press the
<m> button.
• Print list cannot be set up while the camera is connected to a printer.
266
Printing Images
Still Images
Configuring Print Settings
Specify the printing format, whether to add the date or file number, and
other settings as follows. These settings apply to all images in the print list.
zzPress the <n> button, and then
choose [Print Settings] on the [2] tab.
Choose and configure settings as desired
Standard
Index
One image is printed per sheet.
Smaller versions of multiple images are printed
per sheet.
Print Type
Both
On
Both staard aindex formats are printed.
Images printed with the shooting date.
Date
Off
On
Iare printed with the file number.
–
File No.
Off
All image print list settings are cleared after
printing.
On
Off
Clear DPOF
data
–
• Not all of your DPOF settings may be applied in printing by the
printer or photo development service, in some cases.
• [ ] may be displayed on the camera to warn you that the memory
card has print settings that were configured on another camera.
Changing the print settings using this camera may overwrite all
previous settings.
• Setting [Date] to [On] may cause some printers to print the date
twice.
267
Printing Images
• Specifying [Index] will prevent you from choosing [On] for both [Date] and
[File No.] at the same time.
• Index printing is not available on some Canon PictBridge-compatible printers
(sold separately).
• The date is printed in a format matching setting details in [Date/Time] on the
Still Images
Setting Up Printing for Individual Images
1 Choose [Select Images & Qty.].
zzPress the <n> button, choose
[Select Images & Qty.] on the [2] tab,
and then press the <m> button.
2 Choose an mage.
zzPress the <qr> buttons or turn the
<7> dchose an image, and then
th<m> button.
Xn now specify the number of
copies.
zzIf you specify index printing for the image,
it is labeled with a [ ] icon. To cancel
index printing for the image, press the
<m> button again. [ ] is no longer
displayed.
268
Printing Images
3 Specify the number of prints.
zzPress the <o><p> buttons or turn the
<7> dial to specify the number of prints
(up to 99).
zzTo set up printing for other images and
specify the number of prints, repeat steps
2 – 3.
zzPrinting quantity cannot be specified for
index prints. You can only choose which
images to print, by following step 2.
zzWhen finished, press the <n> button
to return to the menu screen.
Still Images
Setting Up Printing for a Range oImages
1 Chse [Select Range].
lecRange] and press the <m>
tton.
2 Choose images.
images.
3 Configure the print settings.
zzPress the <o><p> buttons to choose
[Order], and then press the <m> button.
269
Printing Images
Still Images
Setting Up Printing for All Images
1 Choose [Select All Images].
[Select All Images] and press the <m>
button.
2 Configure the print settings.
zzPress the <q><r> buttons or turn the
<7> dial to choose [OK], and then press
the <m> button.
Still Images
Clearing All Images from the Print List
1 Choose [Clar All Selections].
[ar ASelections] and press the <m>
2 Cfirm clearing the print list.
zzPress the <q><r> buttons or turn the
<7> dial to choose [OK], and then press
the <m> button.
Still Images
Printing Images Added to the Print List (DPOF)
zzWhen images have been added to the
at left is displayed after you connect
the camera to a PictBridge-compatible
printer. Press the <o><p> buttons to
choose [Print now], and then simply press
the <m> button to print the images in the
print list.
zzAny DPOF print job that you temporarily
stop will be resumed from the next image.
270
Printing Images
Still Images
Adding Images to a Photobook
Photobooks can be set up on the camera by choosing up to 998 images
on a memory card and importing them into the included software on your
computer, where they are stored in their own folder. This is convenient
when ordering printed photobooks online or printing photobooks with your
own printer.
Choosing a Selection Method
zzPress the <n> button, choose
[Photobook Set-up] on the [1] tab, and
then choose how you will select images.
• [ ] may be displayed ohe mera to warn you that the memory
card has print settings ere configured on another camera.
Changing the prnt settinsing this camera may overwrite all
previous settings
• After importing images to your computer, also refer to the Software Guide
271
Printing Images
Still Images
Adding Images Individually
1 Choose [Select].
zzFollowing the previous procedure, choose
[Select] and press the <m> button.
2 Choose an image.
zzPress the <q><r> buttons or turn the
<7> dial to choose an image, and then
press the <m> button.
XX[ ] is displayd.
zzTo remove thmage from the photobook,
press m> button again. [ ] is no
ler dplayed.
zt this process to specify other
imaes.
zzWhen finished, press the <n> button
to return to the menu screen.
Still Images
Adding All Images to a Photobook
1 Choose [Select All Images].
choose [Select All Images] and press the
<m> button.
2 Configure the print settings.
zzPress the <q><r> buttons or turn the
<7> dial to choose [OK], and then press
the <m> button.
272
Printing Images
Still Images
Removing All Images from a Photobook
1 Choose [Clear All Selections].
choose [Clear All Selections] and press
the <m> button.
2 Confirm clearing the photobook.
zzPress the <q><r> buttons or turn the
<7> dial to choose [OK], and then press
the <m> button.
273
Still Images
Movies
Using an Eye-Fi Card
Before using an Eye-Fi card, always confirm that local use is permitted
Inserting a prepared Eye-Fi card enables automatic wireless transfer of
images to a computer or uploading to a photo-sharing website.
Images are transferred by the Eye-Fi card. Refer to the card’s user manual
or contact the manufacturer for instructions on preparing and using cards or
resolving transfer problems.
• When using an Eye-Fi card, keep the following points in mind.
- Cards may continue to transmit radio waves even when
card before entering hospitals, aircraft, or other areas where
transmission is prohibited.
- When troubleshooting image transfer issues, check the card and
computer settings. For details, refer to the card’s user manual.
- Poor Eye-Fi connections may cause mge transfer to take a long
time, and transfer may be interrd in ome cases.
- Eye-Fi cards may become ot, dto their transfer functions.
- Battery power will be confaster than in normal use.
- Camera operation may becsluggish. To resolve this, try
setting [Eye-Fi tran.] to Disable].
274
Using an Eye-Fi Card
Connection status of Eye-Fi cards in the camera can be checked on the
shooting screen (in regular information display mode) or playback screen (in
simple information display mode).
(Gray)
Not connected
Connecting
Interrupted
(Blinking white)
Not communicating
Error acquiring Eye-Fi card
information*2
(White)
Connected
Transfer in
progress*1
(Animated)
transfer.
* 2 Restart the camera. Repeated display of this icon may indicate a problem with the
card.
Images labeled with a [ ] icon have been transferred.
• Choosing [ ] mode will interrupt the Eye-i connection. Although the Eye-Fi
connection will be restored after yohoosanother shooting mode or enter
Playback mode, the camera may er any movies made in [ ] mode
again.
275
Using an Eye-Fi Card
Checking Connection Information
Check the access point SSID used by the Eye-Fi card or the connection
status, as needed.
zzPress the <n> button, choose
[Eye-Fi Settings] on the [3] tab, and then
press the <m> button.
zzChoose [Connection info], and then press
the <m> button.
XXThe connection information screen is
displayed.
Disabling Eye-Fi Transfer
Configure the setting as follows to disable Eye-Fi transfer by the card, if
necessary.
Choose [sable] in [Eye-Fi trans.].
zthe <n> button, choose
[Ei Settings] on the [3] tab, and then
press the <m> button.
zzChoose [Eye-Fi trans.], and then choose
[Disable].
• [Eye-Fi Settings] is not shown unless an Eye-Fi card is in the
camera with its write-protect tab in the unlocked position. For this
reason, you cannot change settings for an inserted Eye-Fi card if
the write-protect tab is in the locked position.
276
Troubleshooting
If you think there is a problem with the camera, first check the following.
If the items below do not solve your problem, contact a Canon Customer
Support Help Desk.
Power
Nothing happens when the power button is pressed.
• Dirty battery terminals reduce battery performance. Try cleaning the terminals with a
cotton swab and reinserting the battery a few times.
The battery is depleted quickly.
• Battery performance decreases at low temperatures. Try warming the battery a little
by putting it in your pocket, for example, with the terminal cover on.
• If these measures do not help and the battery is still depleted soon after charging, it
has reached the end of its life. Purchase a new battery.
The lens is not retracted.
• Do not open the memory card/battery cover the cmera is on. Close the cover,
The battery is swollen.
• Battery swelling is normal and does not any safety concerns. However, if battery
swelling prevents the battery frm fittg in the camera, contact a Canon Customer
Support Help Desk.
Display on a TV
Shooting
Cannot shoot.
Strange display on the screen when shooting.
Note that the following display problems are not recorded in still images but are
recorded in movies.
• The screen may flicker and horizontal banding may appear under fluorescent or LED
lighting.
278
Troubleshooting
No date stamp is added to images.
to images automatically, merely because you have configured the [Date/Time] setting
[h] flashes on the screen when the shutter button is pressed, and
[
• Mount the camera on a tripod or take other measures to keep it still. In this case, you
Shots are out of focus.
• Press the shutter button halfway to focus on subjes before pressing it all the way
• Confirm that unneeded functions smacro are deactivated.
No AF frames are displayed and the camera does not focus when the
shutter button is pressed halfway.
• To have AF frames displayed and the camera focus correctly, try composing the
shot with higher-contrast subject areas centered before you press the shutter button
halfway. Otherwise, try pressing the shutter button halfway repeatedly.
Subjects in shots look too dark.
Subjects look too bright, highlights are washed-out.
• Reduce the lighting on subjects.
279
Troubleshooting
• Adjust brightness by using flash exposure compensation or changing the flash output
Subjects in flash shots look too bright, highlights are washed-out.
• Adjust brightness by using flash exposure compensation or changing the flash output
White dots or similar image artifacts appear in flash shots.
• This is caused by light from the flash reflecting off dust or airborne particles.
Shots look grainy.
lamp. Also try increasing the lighting iscenes and shooting at closer range.
Recording to the memory card takes too long, or continuous shooting
is slower.
Shooting settings or FUNC. menu settings are not available.
• Available setting items vary by shooting mode. Refer to “Functions Available in Each
The Babies or Children icon does not display.
• The Babies and Children icons will not display if the birthday is not set in face
280
Troubleshooting
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
• Use the camera to format the memory card, or switch to a card that supports high-
speed recording. Note that even if the elapsed time display is incorrect, the length
[
] is displayed and shooting stops automatically.
The camera’s internal memory buffer filled up as the camera could not record to the
memory card quickly enough. Try one of the following measures.
Zooming is not possible.
modes.
Subjects look distorted.
• Subjects that pass in front of the camera kly my look distorted. This is not a
malfunction.
Playback
Playback is not possibe.
• Image or movie playback my nobe possible if a computer is used to rename files or
structure and file names.
Playback stops, or audio skips.
• Switch to a memory card that you have performed low-level formatting on with the
• There may be brief interruptions when playing movies copied to memory cards that
have slow read speeds.
• When movies are played on a computer, frames may be dropped and audio may skip
if computer performance is inadequate.
Sound is not played during movies.
sound in the movie is faint.
because audio is not recorded in these modes.
281
Troubleshooting
Computer
Cannot transfer images to a computer.
When attempting to transfer images to the computer via a cable, try reducing the
transfer speed as follows.
• Press the <1> button to enter Playback mode. Hold the <n> button down as
m
you press the <o> and < > buttons at the same time. On the next screen, press
m
the <q><r> buttons to choose [B], and then press the < > button.
Eye-Fi Cards
282
On-Screen Messages
If an error message is displayed, respond as follows.
No memory card
• The memory card may be inserted facing the wrong way. Reinsert the memory card
Memory card locked
• The write-protect tab of the memory card is set to the locked position. Switch the
Cannot record!
• Shooting was attempted without a memory card in the camera. To shoot, insert a
• If the same error message is displayed even when you have inserted a formatted
memory card facing the correct way, contact a Canon Customer Support Help Desk
Insufficient space on card
No Image.
• The memory card does not ontan any images that can be displayed.
Unidentified Image/Incompatible JPEG/Image too large./Cannot play
back AVI/RAW
• Unsupported or corrupt images cannot be displayed.
• It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.
Cannot magnify!/Cannot play back this content in Smart Shuffle/
Cannot rotate/Cannot modify image/Cannot register this image!/
Cannot modify/Cannot assign to category/Unselectable image./No
identification information
• The following functions may be unavailable for images that were renamed or already
edited on a computer, or images shot with another camera. Note that starred (*)
functions are not available for movies.
283
On-Screen Messages
Invalid selection range
attempted to choose an initial image that was after the final image, or vice-versa.
Exceeded selection limit
correctly. Reduce the number of selected images and try again.
Communication error
• An excessive amount of images (approx. 1,000) on the memory card prevented
printing or image transfer to a computer. To transfer the images, use a commercially
available USB card reader. To print, insert the memory card directly into the printer
card slot.
Naming error!
• The folder could not be created or images cot be corded, because the highest
supported folder number (999) for stormags on the card has been reached and
the highest supported image number or mages in folders has been reached.
Lens Error
• This error may occur if the lens is held while it is moving, or when the camera is used
in dusty or sandy locations.
• Frequent display of this error message may indicate camera damage. In this case,
contact a Canon Customer Support Help Desk.
A camera error was detected (error number)
• If this error message is displayed immediately after a shot, the image may not have
been saved. Switch to Playback mode to check for the image.
• Frequent display of this error message may indicate camera damage. In this case,
write down the error number (Exx) and contact a Canon Customer Support Help
Desk.
File Error
images that have been altered using computer software, even if the camera is
connected to the printer.
284
On-Screen Messages
Print error
setting is correct, restart the printer and complete the setting on the camera again.
Ink absorber full
• Contact a Canon Customer Support Help Desk to request assistance with ink
absorber replacement.
285
On-Screen Information
Shooting (Information Display)
Digital zoom
Exposure level
164)
Camera orientation*
White balance
Eye-Fi connection
Camera shake warning
Metering method
Still image compression
Digital onrter
pot E point frame
Focusing range
Shooting mode
Electronic level
Aperture value
Exposure compensation
Red-eye correction
Recordable shots
Remaining time
White balance
Flash exposure
compensation / Flash
165)
286
On-Screen Information
Blink detection
Image stabilization
Exposure shift bar
Mercury lamp correction
/ Focus bracketing
Exposure compensation
*
: Regular orientation,
: Held vertically
The camera detects the shooting orientation and adjusts settings for optimal shots.
Orientation is also detected during playback, and in either orientation, the camera
automatically rotates images as needed.
However, the orientation may not be detected correctly when the camera is pointed
straight up or down.
Battery Level
An on-screen icon or message indicates the battery charge level.
Display
Details
Sufficieharg
tly pleted, but sufficient
(Blinking red)
depleted – charge the battery soon
Depleted – charge the battery immediately
[Charge the battery]
287
On-Screen Information
Playback (Detailed Information Display)
Switch display
Shooting mode
Focusing range
Transferred via Eye-F
Meterhod
oldenumber - File
File size
Exposure compensation
Exposure shift level
Still images: Resolution
Movies: Movie length
White balance
balance correction
Current image no. /
Total no. of images
Shutter speed (still
Image quality / Frame
Aperture value
Image quality (movies)
Shooting date/time
Red-eye correction
210)
Compression (image
(movies)
Group playback
Movie Digest Playback
155), Flash exposure
Playback speed
288
On-Screen Information
• Some information may not be displayed when viewing images on a TV
Exit
Play
Slow Motion (To adjust the playback speed, press the <q><r> buttons or turn
the <7> dial. No sound is played.)
(To continue skipping backward, keep holding down the <m> button.)
Previous Frame (For fast-rewind, keep holding down the <m> button.)
Next Frame (For fast-forward, keep holding down the <m> button.)
(To continue skipping forward, keep holdig own the <m> button.)
*
c
Shown when the caera is cted to a PictBridge-compatible printer
* Displays the frame approx. 4 sec. before or after the current frame.
• To skip forward or back during movie playback, press the <q><r> buttons.
289
Functions and Menu Tables
Functions Available in Each Shooting Mode
Shooting Mode
K
DBMGA
I
Function
1
1
1
1
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
*
*
*
*
O
ISO Speed
1
1
–
–
–
O
O
O
O
O
*
*
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
–
–
O
O
O
O
O
O
–
–
–
O
–
O
–
O
–
O
O
O
O
O
O
O
–
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
O
–
O
O
–
O
O
–
O
–
O
O
O
O
O
–
O
–
h
Z
4
*
O
O
O
–
O
O
O
O
–
O
O
–
O
O
–
O
O
–
!
Metering Method
–
–
–
–
–
–
–
–
O
O
O
–
–
–
–
O
–
O
O
–
O
O
–
O
O
–
O
O
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
1
1
O
–
–
–
–
–
*
*
1
1
e
*
*
Focusing Range
–
–
/ 8
1
1
/AF Lock
Off
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
*
*
1
1
*
*
1
1
–
O
O
–
O
O
O
O
O
O
*
*
O
O
O
O
O
O
O
O
O
O
–
1
1
–
–
*
*
Screen Display
1
1
Display 1
O
O
O
O
*
*
1
1
Display 2
*
*
*1 Options vary depending on the assigned shooting mode.
*2 Advanced settings not available.
*3 Set to [!] when the flash is down, but otherwise selection is possible when the flash
is up.
*4 Not available, but switches to [Z] in some cases.
290
Functions and Menu Tables
K
E
x
v
T
E
Y
SPt
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
*
O
O
–
O
O
–
O
O
–
O
O
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
O
O
–
4
*
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
–
O
O
O
O
–
–
–
–
O
O
O
–
O
O
O
–
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
O
–
–
–
–
–
–
–
O
O
–
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
–
–
–
–
–
–
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
–
O
O
–
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
–
O
O
–
O
O
–
–
–
–
–
O
–
O
–
O
–
O
–
–
–
–
–
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
Available or set automatically. Not available.
291
Functions and Menu Tables
FUNC. Menu
Shooting Mode
K
I
DBMGA
Function
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
DR Correction
O
–
–
–
–
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
–
O
–
Shadow Correct
O
O
–
O
–
O
–
White Balance
h
–
–
–
–
–
–
S
2
2
*
*
–
–
–
O
–
O
–
O
–
3
3
*
*
*
1
O
O
O
O
4
*
1
1
1
1
1
1
1
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
–
O
–
O
–
O
–
*
*
*
*
*
*
*
Bracketing
–
–
–
–
O
O
–
O
O
–
O
–
O
–
O
–
–
–
Drive Mode
1
1
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
W
*
*
5
*
1
1
–
–
*
*
1
1
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
*
*
1
1
][$
Delay*6
Shots*7
*
*
1
1
*
*
Self-Timer Settings
1
1
*
*
*1 Options vary depending on the assigned shooting mode.
*2 Not available in [x] or [v].
*3 White balance is not available.
*4 Set in a range of 1 – 5: contrast, sharpness, color saturation, red, green, blue, and
skin tone.
*5 [ ] is set with [f], AF lock, or [t].
*6 Cannot be set to 0 seconds in modes without selection of the number of shots.
*7 One shot (cannot be modified) in modes without selection of the number of shots.
292
Functions and Menu Tables
K
E
x
v
T
E
Y
SPt
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
–
O
O
–
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
–
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
–
–
–
–
–
–
–
–
–
–
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
–
–
–
–
–
–
–
O
–
O
–
O
–
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
–
O
O
O
–
O
O
O
–
–
–
–
–
–
–
–
–
–
O
Available or set automatically. Not available.
293
Functions and Menu Tables
Shooting Mode
K
I
DBMGA
Function
1
1
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
–
O
–
*
*
*
*
*
*
*
*
1
1
1
1
1
1
O
O
O
–
–
–
O
O
O
O
O
O
O
Still Image Aspect
Image Type
1
1
1
1
–
–
–
–
O
O
O
O
O
O
O
O
O
–
O
–
*
*
*
*
1
1
1
1
1
1
1
1
1
1
1
1
1
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
–
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Resolution
–
–
Compression
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
Movie Quality
–
–
*1 Options vary depending on thassigned shooting mode.
*2 Only [ ] and [ ] are availabl
294
Functions and Menu Tables
K
E
x
v
T
E
Y
SPt
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
2
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
*
–
O
O
O
–
O
O
O
–
O
O
O
–
O
–
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
–
O
O
O
–
O
O
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
–
O
–
3
–
O
–
*
3
–
*
–
–
O
–
O
Available or set automatically. Not available.
295
Functions and Menu Tables
4Shooting Menu
Shooting Mode
K
I
DBMGA
Function
Face AiAF*1
FlexiZone/Center*4
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
–
2
2
2
2
2
2
2
2
2
2
*
*
*
*
*
*
*
*
*
*
3
*
–
–
O
–
–
Standard
Off
O
O
Digital Zoom
O
O
Digital Tele-converter
(1.5x/2.0x)
2
2
–
–
–
–
O
O
O
O
*
*
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
–
O
–
–
O
–
On
Off
On
Off*5
On
Off
On
Off
On
Off
On
Off
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
–
AF-Point Zoom
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
O
O
–
O
O
–
O
O
O
O
O
–
Continuous AF
O
O
–
O
O
–
AF-assist Beam
MF-Point Zoom
O
–
O
O
O
O
–
O
–
O
O
–
O
O
–
Auto
Flash Mode
Manual
O
–
–
–
–
Flash Exp. Comp
Flash Output
O
–
O
–
–
–
–
O
O
O
O
O
O
–
1st-curtain
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
–
O
–
Flash Control
Shutter Sync.
Red-Eye Corr.
2nd-curtain
–
On
Off
O
O
O
O
–
O
O
O
O
–
O
O
O
–
Red-Eye Lamp On/Off
On
Safety FE
Off
O
*1 Operation when no faces are detected varies by shooting mode.
*2 Options vary depending on the assigned shooting mode.
*4 [FlexiZone] in <G>, <M>, <B>, and <D> modes, otherwise [Center].
*5 [On] when subject movement is detected in <A> mode.
296
Functions and Menu Tables
K
E
x
v
T
E
Y
SPt
–
–
–
–
–
–
–
–
–
O
–
O
–
O
–
O
O
O
–
O
–
O
O
O
O
O
O
–
O
O
O
–
O
–
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
–
O
–
O
–
O
O
O
O
–
–
–
–
–
–
O
O
O
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
–
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
O
O
O
–
O
–
O
O
O
O
O
–
O
O
O
O
O
O
O
–
O
O
O
–
O
O
O
O
O
–
O
O
O
O
O
–
O
O
O
O
O
–
O
O
–
O
O
–
O
O
–
O
–
O
–
O
O
–
O
O
–
O
O
O
O
O
O
–
O
O
–
O
O
–
O
O
–
O
O
O
O
O
O
–
O
–
–
O
–
O
–
O
–
O
O
O
O
–
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
–
O
O
–
O
O
–
O
–
O
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
–
–
–
–
–
–
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
–
–
–
–
–
–
–
–
–
–
–
–
O
–
–
–
–
–
–
–
–
O
Available or set automatically. Not available.
297
Functions and Menu Tables
Shooting Mode
K
I
DBMGA
Function
1
1
1
1
–
–
–
–
–
–
–
–
Max ISO Speed
Rate of Change
O
O
O
–
O
O
O
O
ISO Auto Settings
*
*
*
*
High ISO NR
Hg Lamp Corr.
1
1
–
–
–
–
–
–
–
Low/Standard/High
On/Off
O
–
O
–
O
–
O
–
*
*
–
–
O
1
1
–
–
–
–
–
–
AF Point
Center
On
O
O
–
O
O
O
O
O
O
O
O
O
O
–
O
–
Spot AE Point
*
*
1
1
*
*
1
1
–
–
–
–
Safety Shift
*
*
1
1
Off
O
O
O
O
O
O
*
*
Wind Filter
1
1
On/Off
O
O
O
O
O
O
O
O
*
*
1
1
Off/Quick/2 – 10 sec./Hold
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
*
*
1
1
Off
Review Info
*
*
1
Detailed/Focus Check
*
1
On
Off
Blink Detection
1
*
*
Custom Display
Shooting Info/Grid Li
Electronic Leel/Histog
1
1
O
O
O
O
O
O
O
O
*
*
1
1
Off
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
–
O
O
O
O
O
O
O
–
O
O
O
O
O
–
*
*
1
1
Continuous
Shoot Only
None/TC-DC58E
Off
*
*
1
1
*
*
1
1
O
O
O
O
–
O
O
O
O
–
*
*
1
1
Date Stamp
*
*
1
1
Date/Date & Time
*
*
1
1
O
–
*
*
1
1
*
*
1
1
O
–
O
–
O
–
O
–
*
*
O
O
*1 Options vary depending on the assigned shooting mode.
], but they will be recorded in still images.
[
displayed in [E], [ ], or [ ], and they will not be recorded in movies.
298
Functions and Menu Tables
K
E
x
v
T
E
Y
SPt
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
O
O
O
O
O
–
O
O
–
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
–
O
O
–
O
O
O
–
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
–
O
O
O
O
O
–
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
–
O
O
O
O
O
O
–
O
O
O
O
O
–
O
O
O
O
O
–
O
O
O
O
O
–
O
O
O
O
O
–
O
O
O
O
O
–
O
O
O
O
O
–
O
O
O
O
O
–
O
O
O
O
O
–
O
O
O
O
O
–
O
O
O
O
O
–
O
O
O
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
–
O
Available or set automatically. Not available.
299
Functions and Menu Tables
3Set up Menu
Item
Ref. Page
Item
Lens Retract
Ref. Page
Mute
Volume
Power Saving
Units
Sound Options
Hints & Tips
Date/Time
Electronic Level
Video System
Ctrl via HDMI
Eye-Fi Settings
Copyright Info
Certification Logo Display
Language
Time Zone
LCD Brightness
Start-up Image
Format
File Numbering
Create Folder
Reset All
My Menu Menu
Item
Ref. Page
My Menu settings
300
Functions and Menu Tables
1Playback Menu
Item
Movie Digest Playback
Smart Shuffle
Slideshow
Ref. Page
Item
Ref. Page
Red-Eye Correction
Cropping
Resize
Erase
My Colors
Protect
Face ID Info
Scroll Display
Group Images
Auto Rotate
Resume
Rotate
Favorites
My Category
Photobook Set-up
i-Contrast
Transition
2Print Menu
Item
Ref. P
Item
Select All Images
Clear All Selections
Print Settings
Ref. Page
–
Print
Select Images & Qty.
Select Range
301
Handling Precautions
•
•
The camera is a high-precision electronic device. Avoid dropping it or
subjecting it to strong impact.
Never bring the camera near magnets, motors, or other devices that
generate strong electromagnetic fields, which may cause malfunction or
erase image data.
•
•
•
•
If water droplets or dirt adheres to the camera or screen, wipe with a dry
soft cloth, such as an eyeglass cloth. Do not rub hard or apply force.
Never use cleaners containing organic solvents to clean the camera or
screen.
Use a blower brush to remove dust from the lens. If cleaning is difficult,
contact a Canon Customer Support Help Desk.
To prevent condensation from forming on the camera after sudden
temperature changes (when the camera is transferred from cold to warm
environments), put the camera in an airtight, resealable plastic bag and
let it gradually adjust to the temperature before removing it from the bag.
•
If condensation does form on the camera, stousing it immediately.
Continuing to use the camera in this smay amage it. Remove the
battery and memory card, and wntihe moisture has evaporated
before resuming use.
302
Specifications
Camera Effective
Pixels (Max.)
Approx. 12.1 million pixels
5x zoom: 6.1 (W) – 30.5 (T) mm
(35mm film equivalent: 28 (W) – 140 (T) mm)
Lens Focal Length
Real-image type optical zoom viewfinder
Dioptric Adjustment Range: –3.0 to +1.0 m‑1 (dpt)
Coverage: Approx. 80%
Viewfinder
3.0 type color TFT LCD
Effective Pixels: Approx. 922,000 dots
LCD Monitor
File Format
Design rule for Camera File system, DPOF (version 1.1)
compliant
Still Images: Exif 2.3 (JPEG), RAW (CR2 (Canon Original))
Movies: MOV (Image data: H.264; Audio data: Linear PCM
(stereo))
Data Type
Hi-speed USB
HDMI output
Analog audio output (stere
Analog video output (NTSPAL)
Interface
Battery Pack NB-
AC AdapteCKDC80
Power Source
Dimensions (Based
on CIPA Guidelines)
1066 x 75.1 mm (4.20 x 2.99 x 1.58 in.)
Apprx. 32 g (approx. 12.4 oz.; including the battery and
memory card)
Approx. 310 g (approx. 10.9 oz.; camera body only)
Weight (Based on
CIPA Guidelines)
303
Specifications
Number of Shots/Recording Time, Playback Time
Screen On
Number of Shots
Approx. 350
Approx. 770
Screen Off
Movie Recording
Screen On
Screen On
Approx. 1 hour, 10 minutes
Time*1
Continuous
Shooting*2
Playback Time
Approx. 2 hours
Approx. 7 hours
*1Time under default camera settings, when normal operations are performed, such as
shooting, pausing, turning the camera on and off, and zooming.
*2Time available when shooting the maximum movie length (until recording stops
automatically) repeatedly.
• The number of shots that can be taken is based on measurement guidelines of the
Camera & Imaging Products Association (CIPA).
• Under some shooting conditions, the number of shots and recording time may be less
than mentioned above.
• Number of shots/time with a fully charged battery.
304
Specifications
Number of 4:3 Shots per Memory Card
Number of Shots per Memory Card
(Approx. shots)
Compression
Ratio
Recording Pixels
8 GB
1379
2192
2431
3721
7442
12927
27291
40937
32 GB
5568
(Large)
12M/4000x3000
8850
9814
(Medium 1)
6M/2816x2112
15020
30040
52176
110150
165225
(Medium 2)
2M/1600x1200
(Small)
0.3M/640x480
RAW Images
4000x3000
–
446
1804
• The values in the table are measured according o anon standards and may change
depending on the subject, memory card mera settings.
• The values in the table are based o3 act ratio. If the aspect ratio is changed
than with 4:3 images. Howver, sin] 16:9 images have a setting of 1920 x 1080
pixels, their data size will blarger than 4:3 images.
Recording Time per Memory Card
Recording Time per Memory Card
Image Quality
8 GB
32 GB
29 min. 39 sec.
42 min. 11 sec.*1
1 hr. 28 min. 59 sec.
1 hr. 59 min. 43 sec.
2 hr. 50 min. 19 sec.*2
5 hr. 59 min. 10 sec.
• The values in the table are measured according to Canon standards and may change
depending on the subject, memory card and camera settings.
• Recording will automatically stop when the clip file size reaches 4 GB, or when the
recording time reaches approximately 29 minutes and 59 seconds when shooting in
[
] or [ ], and approximately 1 hour when shooting in [ ].
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 6 or higher memory cards are recommended.
305
Specifications
Flash Range
50 cm – 7.0 m (1.6 – 23 ft.)
50 cm – 4.5 m (1.6 – 15 ft.)
Maximum wide angle (j)
Maximum telephoto (i)
Shooting Range
Shooting
Mode
Maximum Wide Angle
Maximum Telephoto
Focusing Range
(j)
(i)
–
1 cm (0.4 in.) – infinity
40 cm (1.3 ft.) – infinity
A
5 cm (2.0 in.) – infinity
40 cm (1.3 ft.) – infinity
–
1 – 50 cm
(0.4 in. – 1.6 ft.)
e*
1 cm (0.4 in.) – infinity
40 cm (1.3 ft.) – infinity
–
f*
Other modes
1 – 50 cm
(0.4 in. – 1.6 ft.)
1.5 20 m
1.5 20 m
–
–
8
(4.9 66
(4.9 66
–
ft.)
–
ft.)
* Not available in some shooting modes.
Continuous Shooting Seed
Cntinous Shooting
Mode
Shooting Mode
Speed
Approx. 2.1 shots/sec.
Approx. 0.9 shots/sec.
W
G
Approx. 0.9 shots/sec.
Approx. 10 shots/sec.
–
Shutter Speed
1 – 1/4000 sec.
15 – 1/4000 sec.
<A> mode, automatically set range
Range in all shooting modes
15, 13, 10, 8, 6, 5, 4, 3.2, 2.5, 2, 1.6, 1.3, 1,
0.8, 0.6, 0.5, 0.4, 0.3, 1/4, 1/5, 1/6, 1/8, 1/10,
1/13, 1/15, 1/20, 1/25, 1/30, 1/40, 1/50, 1/60,
1/80, 1/100, 1/125, 1/160, 1/200, 1/250, 1/320,
1/400, 1/500, 1/640, 1/800, 1/1000, 1/1250,
1/1600, 1/2000, 1/2500, 1/3200, 1/4000
<M> mode available values (sec.)
306
Specifications
Aperture
f/number
f/1.8 – f/8.0 (W), f/2.8 – f/8.0 (T)
f/1.8, f/2.0, f/2.2, f/2.5, f/2.8, f/3.2, f/3.5, f/4.0,
f/4.5, f/5.0, f/5.6, f/6.3, f/7.1, f/8.0
<B> mode available values*
* Depending on the zoom position, some aperture values may not be available.
Battery Pack NB-10L
Type:
Rechargeable lithium-ion battery
Rated Voltage:
Rated Capacity:
Charging Cycles:
7.4 V DC
920 mAh
Approx. 300 times
Operating Temperature: 0 – 40 °C (32 – 104 °F)
Dimensions:
Weight:
32.5 x 45.4 x 15.1 mm (1.28 x 1.79 x 0.59 in.)
Approx. 41 g (approx. 1.45 oz.)
Battery Charger CB-2LC/CB-2LCE
Rated Input:
100 – 240 V AC (500 Hz) 6 VA (100 V) – 22 VA (240 V),
0.18 A (100 V) – 0(240 )
8.4 V DC, 0
Rated Output:
Charging Time:
Charge Indicator:
Approx. 1 mi(when using NB-10L)
Chging: orFully charged: green
Operating Temperature: 5 – 0 °C (41 – 104 °F)
Dimensions:
Weight:
92.8 x 63x 27.0 mm (3.65 x 2.48 x 1.06 in.)
CB-2LC: Approx. 80 g (approx. 2.82 oz.)
CB-2LCE: Approx. 74 g (approx. 2.61 oz.) (excluding power cord)
Tele-converter TC-DC58E (Sold Separately)
Zoom Factor:
1.4x
Lens Construction:
Thread Diameter:
5 elements in 3 groups
58 mm*
Max. Diameter x Length: ɸ69.0 x 36.5 mm (ɸ2.72 x 1.44 in.)
Weight: Approx. 165 g (approx. 5.8 oz.)
* Requires Conversion Lens Adapter LA-DC58L.
307
Specifications
Conversion Lens Adapter LA-DC58L (Sold Separately)
Camera Mount:
Bayonet
Thread Diameter:
58 mm
Max. Diameter x Length: ɸ63.8 x 54.8 mm (ɸ2.51 x 2.16 in.)
Weight: Approx. 36 g (approx. 1.3 oz.)
Filter Adapter FA-DC58D (Sold Separately)
Diameter x Length: ɸ66.0 x 46.7 mm (ɸ2.60 x 1.84 in.)
Weight:
Approx. 58 g (approx. 2.0 oz.)
Bracket BKT-DC1 (Sold Separately)
Dimensions (Max.): 220.0 x 32.0 x 19.0 mm (8.66 x 1.26 x 0.75 in.)
Weight:
Approx. 90 g (approx. 3.2 oz.)
•
•
All data is based on tests by Canon.
Camera specifications or appearance are subject to change without
notice
308
Index
A
D
Accessories ....................................... 235
AEB mode ......................................... 131
AE lock .............................................. 126
AF lock............................................... 152
Aspect ratio.......................................... 80
Av (shooting mode) ........................... 163
Date/time
Adding date stamps ...................... 67
Changing....................................... 22
Date/time battery........................... 22
World clock.................................. 220
Defaults Reset all
DIGITAL CAMERA Solution Disk........... 2
Digital tele-converter.......................... 144
Digital zoom......................................... 63
DPOF................................................. 266
Drive mode ........................................ 139
Dynamic Range Correction ............... 132
B
Battery
Charging........................................ 17
Level............................................ 287
Power saving................................. 42
E
diting
Cropping...................................... 207
i-Contrast..................................... 210
Red-eye correction.......................211
Resizing images.......................... 206
C
C1/C2 (shooting mode) ..................... 170
Electronic level .................................... 86
Erasing .............................................. 196
Error messages ................................. 283
Exposure
Camera
Reset all ...................................... 231
Camera shake ................................... 160
Clock.................................................... 51
Color Accent (shooting mode) ........... 109
Color (white balance)......................... 134
Compression ratio (image quality)..... 160
Continuous shooting.......................... 139
FE lock ........................................ 157
F
High-speed burst HQ
(shooting mode) ...........................116
Face select ........................................ 151
Face self-timer (shooting mode).........114
Favorites............................................ 202
FE lock............................................... 157
File numbering................................... 225
Creative filters (shooting mode)........... 99
Custom white balance ....................... 135
309
Index
Flash
Images
Display period ............................... 90
Playback Viewing
Flash exposure compensation .... 156
On ............................................... 154
Slow synchro............................... 155
Indicator............................................... 50
ISO speed.......................................... 129
FlexiZone (AF frame mode)............... 146
Focus bracketing ............................... 153
Focus check ...................................... 179
Focusing
L
Lamp.................................................... 89
M
AF frames.................................... 145
AF lock ........................................ 152
AF-point zoom............................... 87
Face select.................................. 151
Servo AF ..................................... 150
M (shooting mode)............................. 164
Macro (focus mode)........................... 142
Magnified display............................... 189
Manual focus (focus mode) ............... 142
Focusing range
M
Macro .......................................... 142
Manual focus............................... 142
FUNC. menu
Basic operations............................ 48
Metering method................................ 127
Monochrome (shooting mode)........... 108
Movie Digest (shooting mode)............. 94
Movies
H
Handheld nightscene
(shooting mode)................................... 95
High dynamic range
(shooting mode)................................. 100
Editing ......................................... 213
Image quality
(resolution/frame rate)................... 84
High-speed burst HQ
(shooting mode)..................................116
Multi-area White Balance .................... 83
My Category ...................................... 203
Household power............................... 244
I
N
ND filter.............................................. 133
Neck strap Strap
Image quality Compression ratio
(image quality)
Nostalgic (shooting mode)................. 102
310
Index
Servo AF............................................ 150
Shadow Correct................................. 133
Shooting
P
P (shooting mode) ............................. 124
Photobook set-up .............................. 271
Playback Viewing
Shooting date/time Date/time
Slideshow .......................................... 190
Smart Shuffle..................................... 191
Smart Shutter (shooting mode) ..........112
Smile (shooting mode)........................112
Snow (shooting mode)......................... 96
Soft focus (shooting mode)................ 107
Software
Poster effect (shooting mode) ............. 99
Power AC adapter kit
Battery
Battery charger
Printing .............................................. 259
Program AE ....................................... 124
Protecting .......................................... 192
DIGITAL CAMERA Solution Disk .... 2
Saving images to a computer........ 35
R
RAW .................................................. 159
Rotating ............................................. 200
Super slow motion movie
(movie mode)..................................... 121
Super vivid (shooting mode)................ 99
T
TV display.......................................... 239
Tv (shooting mode)............................ 162
S
Screen
Display language........................... 23
Menu FUNC. menu, Menu
SD/SDHC/SDXC memory cards
Memory cards
Searching .......................................... 181
U
Self-timer ............................................. 64
2-second self-timer........................ 65
Customizing the self-timer............. 66
Face self-timer (shooting mode) ..114
Wink self-timer (shooting mode) ..113
311
Index
V
Viewfinder............................................ 44
Image search .............................. 181
Index display ............................... 180
Magnified display ........................ 189
Slideshow.................................... 190
Smart Shuffle .............................. 191
TV display ................................... 239
W
White balance (color)......................... 134
Wink self-timer (shooting mode).........113
Z
312
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
Battery Charger CB-2LC
IMPORTANT SAFETY INSTRUCTIONS-
SAVE THESE INSTRUCTIONS.
DANGER-TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, CAREFULLY
FOLLOW THESE INSTRUCTIONS.
For connection to a supply not in the U.S.A., use an attachment plug adapter of the
proper configuration for the power outlet, if needed.
Battery Charger CB-2LCE
The adapter can be used with a power supply between 100 and 240 V AC.
Contact your Canon dealer for information about plug adapter for overseas use.
For U.S.A. customers only: For areas where 120 V AC power is not used, you will
need a special plug adapter.
For only United States
Use a UL listed, 1.8-3m(6-10ft), Type SPTNTSP-2, AWG no.18 power supply
cord, rated for 125V 7A, with a nonizeNEMA 1-15P plug rated for 125V 15A.
USA and Caada on
The Lithium in/polymer battery that powers the product is recyclable.
Please call 1-800-8-BATTERY for information on how to recycle this
battery.
313
FCC Notice
(Digital Camera, Model PC1815 systems)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions;
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for Class
B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment ad rceiver.
• Connect the equipment into an outlet on a cidiffernt from that to which the
receiver is connected.
• Consult the dealer or an experienced V echnician for help.
The cable with the ferrite core ovided whe digital camera must be used with this
equipment in order to comply wih Clas B limits in Subpart B of Part 15 of the FCC
rules.
Do not make any changes or modifications to the equipment unless otherwise
specified in the manual. If such changes or modifications should be made, you could
be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516) 328-5600
Canadian Radio Interference Regulations
This Class B digital apparatus complies with Canadian ICES-003.
To ensure proper operation of this product, use of genuine Canon
accessories is recommended.
For CA, USA only
Included lithium battery contains Perchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
314
Trademark Acknowledgments
•
•
•
The SDXC logo is a trademark of SD-3C, LLC.
This device incorporates exFAT technology licensed from Microsoft.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
•
The iFrame logo and the iFrame symbol are trademarks of Apple Inc.
About MPEG-4 Licensing
This product is licensed under AT&T patents for the MPEG-4 standard
and may be used for encoding MPEG-4 compliant video and/or decoding
MPEG-4 compliant video that was encoded only (1) for a personal and
non-commercial purpose or (2) by a video provider licensed under the AT&T
patents to provide MPEG-4 compliant video.
No license is granted or implied for any other use for MPEG-4 standard.
* Notice displayed in English as required.
Disclaimer
•
•
•
•
Reprinting, transmitting, or storing in a retrval system any part of this
guide without the permission of Cais prhibited.
Canon reserves the right to cge e contents of this guide at any time
without prior notice.
Illustrations and screeshots in s guide may differ slightly from the
actual equipment.
The above items notwithstanding, Canon accepts no liability for damages
due to mistaken operation of the products.
315
CDD-E490-010
©CANON INC. 2012
|