ATLAS METAL HB 5 User Manual

HEATED BASE-HB SERIES  
Service and Installation Manual  
Please read this manual completely before attempting to install or operate this equipment!  
Notify carrier of damage! Inspect all components immediately. See page 2.  
HEATED BASE-HB SERIES  
ELECTRICALLY HEATED  
UNDER-COUNTER  
Effective Date: 2019  
IMPORTANT INFORMATION  
READ BEFORE USE  
Project: ___________  
Item No.:ꢀ ___________  
Quantity:ꢀ ___________  
SLIDE-IN SERVING EQUIPMENT  
HEATED  
HB-3  
HB-4  
HB-5  
BASE  
Electrically Heated  
Under Counter  
HB-3  
STANDARD FEATURES  
Slides into your counter - puts heated storage where  
you need it  
Fully insulated for maximum efficiency  
Slide assembly for standard 12” x 20” pans  
SPECIFICATIONS  
g
BODY: Double wall constructed with 20 gauge, type 304  
stainless steel interior liner, with coved corners. Exterior wall  
is 22 gauge galvanized steel, with an 18 gauge stainless  
steel facia. The body is filled with 1" of high density fiber-  
glass insulation on all sides. Interior of the body is provided  
with a removable slide assembly to accommodate 12" X 20"  
pans.  
g
g
g Electrically heated - thermostat control  
g 1-Year Parts &ꢀLabor Warranty  
g
UL Listed  
DOORS: Doors are double wall constructed of 18 gauge,  
type 304 stainless steel, fully insulated with high density  
fiberglass, and provided with edge mounted, chrome plated  
hinges and a slam action latch. Doors are complete with a  
moisture-proof gasket.  
ELECTRICAL: The unit is provided with an 850 watt ele-  
ment, pre-wired to an on/off thermostat switch and pilot light.  
The unit is wired for 15 amp., 120 volt, single phase opera-  
tion, with a 6’ long, 3-wire cord and plug (NEMA 5-15P).  
Specifications subject to change without notice.  
DI-57  
“A”  
23-5/8”  
PLAN VIEW  
15-3/4”  
14-5/8”  
14-1/8”  
15-1/2”  
FRONT ELEVATION  
29-1/8”  
END VIEW  
STORAGE CAPACITY  
12” X 20” PANS  
CUT-OUT  
ELECTRICAL  
SHIP WT.  
MODEL  
HB-3  
“A”  
REQUIRED  
CHARACTERISTICS (LBS.)  
41-7/8”  
(106cm)  
15-3/4” X 41-7/8” 850 W - 7.1 amps.  
(40 X 106cm) 120V  
190  
(86.1kg)  
8
55-5/8”  
15-3/4” X 55-5/8” 850 W - 7.1 amps.  
(40 X 140.9cm) 120V  
265  
HB-4  
12  
16  
(140.9cm)  
(120.2kg)  
69-3/8”  
(175.8cm)  
15-3/4” X 69-3/8” 850 W - 7.1 amps.  
(40 X 175.8cm) 120V  
312  
(141.5kg)  
HB-5  
Atlas Metal Industries 1135 NWꢀ159th Dr. Miami, FL 33169 (800) 762-7565 Fax: (305) 623-0475 atlasfoodserv.com  
DI-58  
2/19-sc  
SLIDE- IN HEATED BASE  
HB SERIES  
--------------------------------------------------------------------------------------------------------------------------------------------------------------------  
--------------------------------------------------------------------------------------------------------------------------------------------------------------------  
OPERATION  
The unit is ready to operate as soon as it is plugged in and turned on. The thermostat has an off position and  
numbers from #1 through #10 (number 10 is the highest setting).  
The unit is supplied with a power cord and NEMA plug. Refer to the data plate for the amperage and voltage  
information. Use a licensed electrician when installing power source.  
--------------------------------------------------------------------------------------------------------------------------------------------------------------------  
--------------------------------------------------------------------------------------------------------------------------------------------------------------------  
MAINTENANCE  
NEVER CLEAN THE UNIT WITH A CHLORIDE BASED PRODUCT. CHLORIDES OR IMPROPER  
CLEANING COULD SCAR, MARK AND/OR CORRODE METAL. DO NOT USE STEEL WOOL OR  
ABRASIVE PRODUCTS. TO CLEAN USE SOAPY WARM WATER, RINSE THOROUGHLY TO REMOVE  
ALL RESIDUES. FAILURE TO MEET THESE CONDITIONS WILL VOID WARRANTY.  
Subsidiary of Mercury Aircraft, Inc.  
1135 N.W. 159th DR., MIAMI, FL 33169  
PHONE (305) 625-2451, (800) 762-7565, FAX (305) 623-0475, E-mail: [email protected]  
PARTS LIST ELECTRICAL HEATED BASE  
HB SERIES  
1
2
6
7
3
4
5
8
H B -4 S H O W N  
9
10  
ITEM  
P ART  
DESCRIPTION  
NUMBER  
NUMBER  
1001-0  
Power Cord 14/3-15 Amps 240V  
1
1002-0  
22-1407  
1100-0  
1105-0  
7010-3  
7013-3  
S83754-4  
S83753-0  
6055-1  
6052-1  
S83754-3  
6053-8  
1087-0  
2500-1  
1053-0  
Power Cord 14/3-15 Amps 120V  
Thermostat Knob  
2
3
4
Pilot Light  
Thermometer  
#3 & #4 Door Gasket  
#4 & #5 Door Gasket  
Door Assembly HB-5  
Pan Rack  
5
6
7
Slam Action Latch  
8
Slam Action W/ Lock  
Door Assembly HB-3, HB-4  
Hinge & Cover  
9
10  
11  
12  
Cord Connector (Not Shown)  
Thermostat (Not Shown)  
120V / 850W Element (Not Shown)  
208V / 850W Element (Not Shown)  
240V / 850W Element (Not Shown)  
13  
1054-0  
1055-0  
Subsidiary of Mercury Aircraft, Inc.  
1135 N.W. 159th DR., MIAMI, FL 33169  
PHONE (305) 625-2451, (800) 762-7565, FAX (305) 623-0475, E-mail: [email protected]  
Electric Hot Food Drop-In Trouble Shooting Guide  
Symptom  
Probable Cause  
Unit not plugged in.  
No power at receptacle.  
Thermostat and or switch not in the on position.  
Call factory for service at 1-800-762-7565  
Unit will not heat  
Thermostat’s not turned to the highest setting.  
Food products not hot enough when placed in unit.  
Food product not being stirred or rotated.  
Heat lamp or head strip over the food product is recommended.  
Call factory for service at 1-800-762-7565.  
Food products not  
hot enough.  
NOTE:  
Before starting any warranty repair work you must first call the factory for authorization.  
Failure to do so can make you responsible for repair cost.  
LIMITED WARRANTY  
Atlas Metal Industries, Inc. warrants to the Purchaser of this product that the  
same shall be free from defects in the workmanship and material for a period of  
one year from the date of original installation of the equipment, but not to exceed  
eighteen (18) months after date of shipment from factory. During this period of  
time Atlas Metal Industries, Inc. will replace all defective parts and will pay for  
authorized replacement labor. Replacement and installation of such parts and  
labor shall be provided only upon prior written authority of Atlas Metal Industries,  
Inc.  
The Refrigeration warranty is for a twenty (20) month time period and includes  
supplying the compressor at a no charge basis provided the damage to the  
compressor was not caused by the customer or end user. Authorized  
replacement labor will be paid for a period of one year from date of installation.  
Freight costs for defective unit to and from Atlas Metal Industries, Inc. are not  
included, and all defective parts must be returned to the factory freight prepaid  
for evaluation. ALL WARRANTY LABOR MUST BE AUTHORIZED BY ATLAS  
METAL INDUSTRIES, INC. PRIOR TO THE ACTUAL WORK BEING DONE.  
This warranty does not apply to any equipment or any part thereof, which has  
been subjected to shipping damage, improper voltage, alteration, abuse or  
misuses, and does not cover loss of food, other products, or damage to property  
due to mechanical or electrical malfunction.  
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE  
DESCRIPTION OF THE FACE HEREOF. SELLER DISCLAIMS ANY IMPLIED  
WARRANTY OF MERCHANTABILITY OF THE GOODS OR THE FITNESS OF  
THE GOODS FOR ANY PURPOSE AND BUYER AGREES THAT THE GOODS  
ARE SOLD “AS IS.”  
WARRANTY INFORMATION  
In order to have your invoice approved for  
payment by the factory, please note the following:  
_______________________________________________  
An authorization number must be obtained from  
the factory prior to performing any warranty  
service.  
_______________________________________________  
Atlas Metal will not approve excessive labor due to poor  
access to the unit being serviced. If design does not  
allow reasonable access, contact the factory.  
_______________________________________________  
All travel time that exceeds 100 miles round trip  
must be authorized by the factory.  
_____________________________________________________________________________________  
Thank You:  
Warranty service Dept.  

Sanyo 12xs71 User Manual
Mitsubishi Motors Automobile Parts R4m21 User Manual
MAKITA LXSF01 User Manual
LG CMS2460F 02 User Manual
HP 5550N User Manual
HITACHI 60V525E User Manual
CYBERPOWER PDU41101 User Manual
CRAFTSMAN 917.379480 User Manual
CRAFTSMAN 917.204130 User Manual
BLACK DECKER KS701PE User Manual