ASUS X5RE User Manual

E6378  
Notebook PC User Manual  
May 2011  
Notebook PC User Manual  
3
4
Notebook PC User Manual  
Chapter 1:  
Introducing the  
1
Notebook PC  
 
About This User’s Manual  
You are reading the Notebook PC User’s Manual.This User’s Manual  
provides information regarding the various components in the  
Notebook PC and how to use them.The following are major sections  
of this User’s Manual:  
1. Introducing the Notebook PC  
Introduces you to the Notebook PC and this User’s Manual.  
2. Knowing the Parts  
Gives you information on the Notebook PC’s components.  
3. Getting Started  
Gives you information on getting started with the Notebook PC.  
4. Using the Notebook PC  
Gives you information on using the Notebook PC’s components.  
5. Appendix  
Introduces you to optional accessories and gives additional  
information.  
The actual bundled operating system and applications differ by  
models and territories.There may be differences between your  
Notebook PC and the pictures shown in this manual. Please  
accept your Notebook PC as being correct.  
Notes for This Manual  
A few notes and warnings are used throughout this guide, allowing  
you to complete certain tasks safely and effectively.These notes have  
different degrees of importance as follows:  
WARNING! Important information that must be followed for safe  
operation.  
IMPORTANT! Vital information that must be followed to prevent  
damage to data, components, or persons.  
TIP: Tips for completing tasks.  
NOTE: Information for special situations.  
6
Notebook PC User Manual  
 
Safety Precautions  
The following safety precautions will increase the life of the  
Notebook PC. Follow all precautions and instructions. Except as  
described in this manual, refer all servicing to qualified personnel.  
Disconnect the AC power and remove the battery pack(s) before  
cleaning.Wipe the Notebook PC using a clean cellulose sponge  
or chamois cloth dampened with a solution of nonabrasive  
detergent and a few drops of warm water and remove any extra  
moisture with a dry cloth.  
DO NOT place on  
DO NOT place or drop  
objects on top and  
do not shove any  
foreign objects into the  
Notebook PC.  
uneven or unstable work  
surfaces. Seek servicing  
if the casing has been  
damaged.  
DO NOT expose to dirty  
or dusty environments.  
DO NOT operate during a  
gas leak.  
DO NOT expose to  
strong magnetic or  
electrical fields.  
DO NOT press or touch  
the display panel. Do not  
place together with small  
items that may scratch or  
enter the Notebook PC.  
DO NOT expose to or  
use near liquids, rain,  
or moisture. DO NOT  
use the modem during  
electrical storms.  
DO NOT leave the  
Notebook PC on your lap  
or any part of the body  
to prevent discomfort  
or injury from heat  
exposure.  
Battery safety warning:  
DO NOT throw the  
battery in fire. DO NOT  
short circuit the contacts.  
DO NOT disassemble the  
battery.  
Notebook PC User Manual  
7
 
SAFE TEMP:This  
Notebook PC should  
only be used in  
environments with  
ambient temperatures  
between 5°C (41°F) and  
35°C (95°F).  
INPUT RATING: Refer to  
the rating label on the  
bottom of the Notebook  
PC and be sure that your  
power adapter complies  
with the rating.  
DO NOT carry or cover  
a Notebook PC that  
is powered ON with  
any materials that will  
reduce air circulation  
such as a carrying bag.  
DO NOT use strong  
solvents such as  
thinners, benzene, or  
other chemicals on or  
near the surface.  
DO NOT use damaged  
power cords, accessories,  
or other peripherals.  
Incorrect installation  
of battery may cause  
explosion and damage  
the Notebook PC.  
DO NOT throw the Notebook PC in municipal waste.This  
product has been designed to enable proper reuse of parts  
and recycling.The symbol of the crossed out wheeled bin  
indicates that the product (electrical, electronic equipment  
and mercury-containing button cell battery) should not  
be placed in municipal waste. Check local regulations for  
disposal of electronic products.  
DO NOT throw the battery in municipal waste.The symbol  
of the crossed out wheeled bin indicates that the battery  
should not be placed in municipal waste.  
8
Notebook PC User Manual  
Sound Pressure warning  
Excessive sound pressure from earphones or headphones can cause  
hearing damage or loss. Adjustment of the volume control as well as  
the equalizer to settings other than the center position may increase  
the earphones or headphones output voltage and the sound  
pressure level.  
DC Fan warning  
Please note that the DC fan is a moving part that may cause DANGER.  
Ensure to keep your body from the moving fan blades.  
Adapter Information  
Input voltage: 100-240Vac  
Input frequency: 50-60Hz  
Rating output current: 3.42A  
Rating output voltage: 19Vdc  
Transportation Precautions  
To prepare the Notebook PC for transport, you should turn it OFF  
and disconnect all external peripherals to prevent damage to  
the connectors.The hard disk drive’s head retracts when the power  
is turned OFF to prevent scratching of the hard disk surface during  
transport.Therefore, you should not transport the Notebook PC  
while the power is still ON. Close the display panel and check that  
it is latched securely in the closed position to protect the keyboard  
and display panel.  
CAUTION! The Notebook PC’s surface is easily dulled if not  
properly cared for. Be careful not to rub or scrape the Notebook  
PC surfaces.  
Notebook PC User Manual  
9
Cover Your Notebook PC  
Purchase a carrying bag to protect the Notebook PC from dirt, water,  
shock, and scratches.  
Charge Your Batteries  
If you intend to use battery power, be sure to fully charge your  
battery pack and any optional battery packs before going on long  
trips. Remember that the power adapter charges the battery pack as  
long as it is plugged into the computer and an AC power source. Be  
aware that it takes much longer to charge the battery pack when the  
Notebook PC is in use.  
Airplane Precautions  
Contact your airline if you want to use the Notebook PC on the  
airplane. Most airlines will have restrictions for using electronic  
devices. Most airlines will allow electronic use only between and not  
during takeoffs and landings.  
CAUTION! There are three main types of airport security  
devices: X-ray machines (used on items placed on conveyor  
belts), magnetic detectors (used on people walking through  
security checks), and magnetic wands (hand-held devices used  
on people or individual items).You can send your Notebook  
PC and diskettes through airport X-ray machines. However, it  
is recommended that you do not send your Notebook PC or  
diskettes through airport magnetic detectors or expose them to  
magnetic wands.  
10  
Notebook PC User Manual  
Preparing your Notebook PC  
These are quick instructions for using your Notebook PC.  
Installing the Battery Pack  
1
Connecting the Power Adapter  
2
1
10V  
-220V  
3
1
Notebook PC User Manual  
11  
 
Opening the LCD display panel  
1. Carefully lift up the display panel with your thumb.  
2. Slowly tilt the display panel forward or backward to a  
comfortable viewing angle.  
Turning on the Power  
1. Push and release the power button located beneath the LCD  
display panel.  
2. Use [Fn]+[F5] or [Fn]+[F6] to adjust the LCD brightness.  
12  
Notebook PC User Manual  
Chapter 2:  
Knowing the parts  
2
 
Top Side  
The keyboard differs for each territory.  
1
2
3
4
5
6
7
8
14  
Notebook PC User Manual  
 
Microphone (Built-in)  
1
2
The built-in mono microphone can be used for video  
conferencing, voice narrations, or simple audio recordings.  
Camera  
The built-in camera allows picture taking or video  
recording. Can be used with video conferencing and other  
interactive applications.  
Display Panel  
3
The display panel functions the same as a desktop monitor.  
The Notebook PC uses an active matrix TFT LCD, which  
provides excellent viewing like that of desktop monitors.  
Unlike desktop monitors, the LCD panel does not produce  
any radiation or flickering, so it is easier on the eyes. Use  
a soft cloth without chemical liquids (use plain water if  
necessary) to clean the display panel.  
4
5
Power Switch  
The power switch allows powering ON and OFF the  
Notebook PC and recovering from STD. Use the switch once  
to turn ON and once to turn OFF the Notebook PC.The  
power switch only works when the display panel is opened.  
Power4Gear Key (on selected models)  
Under the Windows OS, this key functions as the  
Power4Gear Hybrid key.The key toggles power savings  
between various power saving modes.The power saving  
modes control many aspects of the Notebook PC to  
maximize performance versus battery time. Applying or  
removing the power adapter will automatically switch the  
system between AC mode and battery mode.The selected  
mode is shown on the display.  
Notebook PC User Manual  
15  
Keyboard  
6
The keyboard provides full-sized keys with comfortable  
travel (depth at which the keys can be depressed) and  
palm rest for both hands.Two Windows function keys are  
provided to help ease navigation in the Windows operating  
system.  
Touchpad and Buttons  
7
8
The touchpad with its buttons is a pointing device that  
provides the same functions as a desktop mouse. A  
software-controlled scrolling function is available after  
setting up the included touchpad utility to allow easy  
Windows or web navigation.  
Status Indicators (front)  
Status indicators represent various hardware/software  
conditions. See indicator details in Chapter 3.  
16  
Notebook PC User Manual  
Bottom Side  
The bottom side may vary in appearance depending on model.  
The battery pack size varies depending on model.  
1
2
1
3
4
The bottom of the Notebook PC can get very hot. Be careful  
when handling the Notebook PC while it is in operation or  
recently been in operation. High temperatures are normal during  
charging or operation. DO NOT USE ON SOFT SURFACES SUCH  
AS SOFAS OR BEDS,WHICH MAY BLOCK THE VENTS. DO NOT  
PUT THE NOTEBOOK PC ON YOUR LAP OR OTHER PARTS OF  
THE BODY TO AVOID INJURY FROM THE HEAT.  
Notebook PC User Manual  
17  
 
1
2
Battery Lock - Spring  
The spring battery lock is used to keep the battery  
pack secured.When the battery pack is inserted, it will  
automatically lock.To remove the battery pack, this spring  
lock must be held in the unlocked position.  
Battery Pack  
The battery pack is automatically charged when the  
Notebook PC is connected to an AC power source and  
maintains power to the Notebook PC when AC power is  
not connected.This allows use when moving temporarily  
between locations. Battery time varies by usage and by  
the specifications for this Notebook PC.The battery pack  
cannot be disassembled and must be purchased as a single  
unit.  
3
4
Hard Disk Drive Compartment  
The hard disk drive is secured in a compartment.Visit an  
authorized service center or retailer for information on hard  
disk drive upgrades for your Notebook PC. Only purchase  
hard disk drives from authorized retailers of this Notebook  
PC to ensure maximum compatibility and reliability.  
Memory (RAM) Compartment  
The memory compartment provides expansion capabilities  
for additional memory. Additional memory will increase  
application performance by decreasing hard disk access.  
The BIOS automatically detects the amount of memory in  
the system and configures CMOS accordingly during the  
POST (Power-On-Self-Test) process.There is no hardware or  
software (including BIOS) setup required after the memory  
is installed.Visit an authorized service center or retailer for  
information on memory upgrades for your Notebook PC.  
Only purchase expansion modules from authorized retailers  
of this Notebook PC to ensure maximum compatibility and  
reliability.  
18  
Notebook PC User Manual  
Right Side  
1
2
3
4 5  
6
1
2
Headphone Output Jack  
The stereo headphone jack (1/8 inch) is used to connect  
the Notebook PC’s audio out signal to amplified speakers  
or headphones. Using this jack automatically disables the  
built-in speakers.  
Microphone Input Jack  
The mono microphone jack (1/8 inch) can be used to  
connect an external microphone or output signals from  
audio devices. Using this jack automatically disables the  
built-in microphone. Use this feature for video conferencing,  
voice narrations, or simple audio recordings.  
USB Port (2.0)  
3
The USB (Universal Serial Bus) port is compatible with USB  
2.0 or USB 1.1 devices such as keyboards, pointing devices,  
cameras, hard disk drives, printers, and scanners connected  
in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec  
(USB 2.0). USB allows many devices to run simultaneously  
on a single computer, with some peripherals acting as  
additional plug-in sites or hubs. USB supports hot-swapping  
of devices so that most peripherals can be connected or  
disconnected without restarting the computer.  
Notebook PC User Manual  
19  
 
Optical Drive Activity Indicator (location varies by  
model)  
4
The optical drive activity indicator shows when data is  
being transferred by the optical disk drive.This indicator  
will light in proportion to the data size transferred.  
Optical Drive Electronic Eject  
5
6
The optical drive eject has an electronic eject button for  
opening the tray.You can also eject the optical drive tray  
through any software player or by right clicking the optical  
drive in WindowsComputerand selecting Eject.  
Optical Drive Emergency Eject (location varies by  
model)  
The emergency eject is used to eject the optical drive tray  
in case the electronic eject does not work. Do not use the  
emergency eject in place of the electronic eject.  
20  
Notebook PC User Manual  
Left Side  
1
2
3
4
5
6
Power (DC) Input  
1
The supplied power adapter converts AC power to DC  
power for use with this jack. Power supplied through this  
jack supplies power to the Notebook PC and charges the  
internal battery pack.To prevent damage to the Notebook  
PC and battery pack, always use the supplied power  
adapter.  
The adapter may become warm to hot when in use. Ensure  
not to cover the adapter and keep it away from your body.  
2
3
LAN Port  
The RJ-45 LAN port with eight pins is larger than the RJ-11  
modem port and supports a standard Ethernet cable for  
connection to a local network.The built-in connector allows  
convenient use without additional adapters.  
Air Vents  
The air vents allow cool air to enter and warm air to exit the  
Notebook PC.  
Ensure that paper, books, clothing, cables, or other objects  
do not block any of the air vents or else overheating may  
occur.  
4
Display (Monitor) Output  
The 15-pin D-sub monitor port supports a standard  
VGA-compatible device such as a monitor or projector to  
allow viewing on a larger external display.  
Notebook PC User Manual  
21  
 
HDMI  
HDMI Port  
5
HDMI (High-Definition Multimedia Interface) is an  
uncompressed all-digital audio/video interface between  
any audio/video source, such as a set-top box, DVD player,  
and A/V receiver and an audio and/or video monitor, such  
as a digital television (DTV). Supports standard, enhanced,  
or high-definition video, plus multi-channel digital audio  
on a single cable. It transmits all ATSC HDTV standards and  
supports 8-channel digital audio, with bandwidth to spare  
to accommodate future enhancements or requirements.  
USB Port (3.0) (on selected models)  
6
The USB (Universal Serial Bus) port is compatible with USB  
3.0, 2.0, or USB 1.1 devices such as keyboards, pointing  
devices, cameras, hard disk drives, printers, and scanners  
connected in a series up to 4.8Gbits/sec (USB 3.0),  
480Mbits/sec (USB 2.0), and 12Mbits/sec (USB 1.1). USB  
allows many devices to run simultaneously on a single  
computer, with some peripherals acting as additional  
plug-in sites or hubs. USB supports hot-swapping of devices  
so that most peripherals can be connected or disconnected  
without restarting the computer.  
22  
Notebook PC User Manual  
Rear Side  
1
2
Kensington® Lock Port  
1
The Kensington® lock port allows the Notebook PC to  
be secured using Kensington® compatible Notebook PC  
security products.These security products usually include  
a metal cable and lock that prevent the Notebook PC to  
be removed from a fixed object. Some may also include a  
motion detector to sound an alarm when moved.  
Battery Pack  
2
The battery pack is automatically charged when the  
Notebook PC is connected to an AC power source and  
maintains power to the Notebook PC when AC power is  
not connected.This allows use when moving temporarily  
between locations. Battery time varies by usage and by  
the specifications for this Notebook PC.The battery pack  
cannot be disassembled and must be purchased as a single  
unit.  
Notebook PC User Manual  
23  
 
Front Side  
1
2
2
Flash Memory Slot  
1
Normally an external memory card reader must be  
purchased separately in order to use memory cards from  
devices such as digital cameras, MP3 players, mobile  
phones, and PDAs.This Notebook PC has a built-in  
high-speed memory card reader that can conveniently read  
from and write to many flash memory cards.  
Audio Speaker System  
2
The built-in stereo speaker system allows you to hear audio  
without additional attachments.The multimedia sound  
system features an integrated digital audio controller  
that produces rich, vibrant sound (results improved with  
external stereo headphones or speakers). Audio features  
are software controlled.  
24  
Notebook PC User Manual  
 
Chapter 3:  
Getting Started  
3
 
Power System  
Using AC Power  
The Notebook PC power is comprised of two parts, the power  
adapter and the battery power system.The power adapter converts  
AC power from a wall outlet to the DC power required by the  
Notebook PC.Your Notebook PC comes with a universal AC-DC  
adapter.That means that you may connect the power cord to any  
100V-120V as well as 220V-240V outlets without setting switches  
or using power converters. Different countries may require that an  
adapter be used to connect the provided US-standard AC power  
cord to a different standard. Most hotels will provide universal  
outlets to support different power cords as well as voltages. It is  
always best to ask an experienced traveler about AC outlet voltages  
when bringing power adapters to another country.  
2
1
10V  
-220V  
3
1
You can buy travel kits for the Notebook PC that includes power  
and modem adapters for almost every country.  
WARNING! DO NOT connect the AC power cord to an AC outlet  
prior to connecting the DC plug to the Notebook PC. Doing so  
may damage the AC-DC adapter.  
26  
Notebook PC User Manual  
 
IMPORTANT! Damage may occur if you use a different adapter  
to power the Notebook PC or use the Notebook PC’s adapter to  
power other electrical devices. If there is smoke, burning scent,  
or extreme heat coming from the AC-DC adapter, seek servicing.  
Seek servicing if you suspect a faulty AC-DC adapter.You may  
damage both your battery pack(s) and the Notebook PC with a  
faulty AC-DC adapter.  
This Notebook PC may come with either a two or three-prong  
plug depending on territory. If a three-prong plug is provided,  
you must use a grounded AC outlet or use a properly grounded  
adapter to ensure safe operation of the Notebook PC.  
WARNING! THE POWER ADAPTER MAY BECOME WARM TO HOT  
WHEN IN USE. BE SURE NOT TO COVER THE ADAPTER AND KEEP  
IT AWAY FROM YOUR BODY.  
Unplug the power adapter or switch off the AC outlet to  
minimize the power consumption when the Notebook PC is not  
in use.  
Notebook PC User Manual  
27  
Using Battery Power  
The Notebook PC is designed to work with a removable battery pack.  
The battery pack consists of a set of battery cells housed together.  
A fully charged pack will provide several hours of battery life, which  
can be further extended by using power management features  
through the BIOS setup. Additional battery packs are optional and  
can be purchased separately through a Notebook PC retailer.  
Installing and Removing the Battery Pack  
Your Notebook PC may or may not have its battery pack installed. If  
your Notebook PC does not have its battery pack installed, use the  
following procedures to install the battery pack.  
IMPORTANT! Never attempt to remove the battery pack while  
the Notebook PC is turned ON, as this may result in the loss of  
working data.  
To install the battery pack:  
1
28  
Notebook PC User Manual  
 
To remove the battery pack:  
1
1
IMPORTANT! Only use battery packs and power adapters  
supplied with this Notebook PC or specifically approved by the  
manufacturer or retailer for use with this model or else damage  
may occur to the Notebook PC.  
Battery Care  
The Notebook PC’s battery pack, like all rechargeable batteries, has  
a limit on the number times it can be recharged.The battery pack’s  
useful life will depend on your environment temperature, humidity,  
and how your Notebook PC is used. It is ideal that the battery be  
used in a temperature range between 10˚C and 35˚C (50˚F and  
95˚F).You must also take into account that the Notebook PC’s  
internal temperature is higher than the outside temperature. Any  
temperatures above or below this range will shorten the life of the  
battery. But in any case, the battery pack’s usage time will eventually  
decrease and a new battery pack must be purchased from an  
authorized dealer for this Notebook PC. Because batteries also have  
a shelf life, it is not recommended to buy extras for storing.  
WARNING! For safety reasons, DO NOT throw the battery in fire,  
DO NOT short circuit the contacts, and DO NOT disassemble the  
battery. If there is any abnormal operation or damage to the  
battery pack caused by impact, turn OFF the Notebook PC and  
contact an authorized service center.  
Notebook PC User Manual  
29  
 
Powering ON the Notebook PC  
The Notebook PC’s power-ON message appears on the screen when  
you turn it ON. If necessary, you may adjust the brightness by using  
the hot keys. If you need to run the BIOS Setup to set or modify the  
system configuration, press [F2] upon bootup to enter the BIOS  
Setup. Press [ESC] and you will be presented with a boot menu with  
selections to boot from your available drives.  
Before bootup, the display panel flashes when the power is  
turned ON.This is part of the Notebook PC’s test routine and is  
not a problem with the display.  
IMPORTANT! To protect the hard disk drive, always wait at least  
5 seconds after turning OFF your Notebook PC before turning it  
back ON.  
WARNING! DO NOT carry or cover a Notebook PC that is  
powered ON with any materials that will reduce air circulation  
such as a carrying bag.  
The Power-On Self Test (POST)  
When you turn ON the Notebook PC, it will first run through a  
series of software-controlled diagnostic tests called the Power-On  
Self Test (POST).The software that controls the POST is installed  
as a permanent part of the Notebook PC’s architecture.The POST  
includes a record of the Notebook PC’s hardware configuration,  
which is used to make a diagnostic check of the system.This record  
is created by using the BIOS Setup program. If the POST discovers  
a difference between the record and the existing hardware, it will  
display a message on the screen prompting you to correct the  
conflict by running BIOS Setup. In most cases the record should be  
correct when you receive the Notebook PC.When the test is finished,  
you may get a message reportingNo operating system foundif the  
hard disk was not preloaded with an operating system.This indicates  
that the hard disk is correctly detected and ready for the installation  
of a new operating system.  
30  
Notebook PC User Manual  
 
Self Monitoring and Reporting Technology  
The S.M.A.R.T. (Self Monitoring  
and Reporting Technology)  
checks the hard disk drive during  
POST and gives a warning  
message if the hard disk drive  
requires servicing. If any critical  
hard disk drive warning is given  
during bootup, backup your data  
immediately and run Windows  
disk checking program.To run  
Window’s disk checking program:  
click Start > select Computer >  
right-click a hard disk drive icon  
> choose Properties > click the  
Tools tab > click Check Now >  
click Start.You can also selectScan ... sectorsfor more effective  
scan and repair but the process will run slower.  
IMPORTANT! If warnings are still given during bootup after  
running a software disk checking utility, you should take your  
Notebook PC in for servicing. Continued use may result in data  
loss.  
Notebook PC User Manual  
31  
Checking Battery Power  
The battery system implements the Smart Battery standard under  
the Windows environment, which allows the battery to accurately  
report the amount of charge left in the battery. A fully-charged  
battery pack provides the Notebook PC a few hours of working  
power. But the actual figure varies depending on how you use the  
power saving features, your general work habits, the CPU, system  
memory size, and the size of the display panel.  
Screen captures shown here are examples only and may not  
reflect what you see in your system.  
You will be warned when battery power is low. If you continue  
to ignore the low battery warnings, the Notebook PC eventually  
enters suspend mode (Windows default uses STR).  
Right-click the battery icon  
Pointer over the battery icon without power adapter.  
Pointer over the battery icon with  
power adapter.  
Left-click the battery icon  
WARNING! Suspend-to-RAM (STR) does not last long when the  
battery power is depleted. STR is not the same as power OFF.  
STR requires a small amount of power and will fail and lose data  
if no power is available due to complete battery depletion or  
no power supply (e.g. removing both the power adapter and  
battery pack).  
32  
Notebook PC User Manual  
 
Charging the Battery Pack  
Before you use your Notebook PC on the road, you will have to  
charge the battery pack.The battery pack begins to charge as  
soon as the Notebook PC is connected to external power using the  
power adapter. Fully charge the battery pack before using it for the  
first time. A new battery pack must completely charge before the  
Notebook PC is disconnected from external power. It takes a few  
hours to fully charge the battery when the Notebook PC is turned  
OFF and may take twice the time when the Notebook PC is turned  
ON.The battery status indicator on the Notebook PC turns OFF when  
the battery pack is charged.  
The battery starts charging when the charge remaining in  
the battery drops below 95%.This prevents the battery from  
charging frequently. Minimizing the recharge cycles helps  
prolong battery life.  
The battery stops charging if the temperature is too high or the  
battery voltage is too high.  
WARNING! DO NOT leave the battery pack discharged.The  
battery pack will discharge over time. If not using a battery pack,  
it must continued to be charged every three months to extend  
recovery capacity or else it may fail to charge in the future.  
Notebook PC User Manual  
33  
 
Power Options  
The power switch turns ON and  
OFF the Notebook PC or putting  
the Notebook PC into sleep  
or hibernation modes. Actual  
behavior of the power switch  
can be customized in Windows  
Control PanelPower Options.”  
For other options, such asSwitch  
User, Restart, Sleep, or Shut Down,click the arrowhead next to the  
lock icon.  
Restarting or Rebooting  
After making changes to your operating system, you may be  
prompted to restart the system. Some installation processes will  
provide a dialog box to allow restart.To restart the system manually,  
choose Restart.  
IMPORTANT! To protect the hard drive, wait at least 5 seconds  
after turning OFF your Notebook PC before turning it back ON.  
34  
Notebook PC User Manual  
 
Emergency Shutdown  
In case your operating system cannot properly turn OFF or restart,  
there is an additional way to shutdown your Notebook PC:  
Hold the power button  
4 seconds.  
over  
IMPORTANT! DO NOT use emergency shutdown while data is  
being written; doing so can result in loss or destruction of your  
data.  
Notebook PC User Manual  
35  
Power Management Modes  
The Notebook PC has a number of automatic or adjustable power  
saving features that you can use to maximize battery life and lower  
Total Cost of Ownership (TCO).You can control some of these  
features through the Power menu in the BIOS Setup. ACPI power  
management settings are made through the operating system.  
The power management features are designed to save as much  
electricity as possible by putting components into a low power  
consumption mode as often as possible but also allow full operation  
on demand.  
Sleep and Hibernate  
Power management settings  
can be found in the Windows  
> Control Panel > Hardware  
and Sound > Power Options. In  
Power Options, you can define  
“Sleep/HibernateorShut Down”  
for closing the display panel  
or pressing the power button.  
“SleepandHibernatesaves power when your Notebook PC is not  
in use by turning OFF certain components.When you resume your  
work, your last status (such as a document scrolled down half way or  
email typed half way) will reappear as if you never left.“Shut Down”  
will close all applications and ask if you want to save your work if any  
are not saved.  
Sleep is the same as Suspend-to-  
RAM (STR).This function stores  
your current data and status in  
RAM while many components  
are turned OFF. Because RAM  
is volatile, it requires power to  
keep (refresh) the data. Click  
the Windows button and the  
arrowhead next to the lock icon  
to see this option.You can also use the keyboard shortcut [Fn F1]  
to activate this mode. Recover by pressing any keyboard key except  
[Fn]. (NOTE:The power indicator will blink in this mode.)  
36  
Notebook PC User Manual  
 
Hibernate is the same as Suspend-to-Disk (STD) and stores your  
current data and status on the hard disk drive. By doing this, RAM  
does not have to be periodically refreshed and power consumption  
is greatly reduced but not completely eliminated because  
certain wake-up components like LAN needs to remain powered.  
“Hibernatesaves more power compared toSleep. Click the Start  
button and the arrowhead next to the lock icon to see this option.  
Recover by pressing the power button. (NOTE:The power indicator  
will be OFF in this mode.)  
Thermal Power Control  
There are three power control methods for controlling the Notebook  
PC’s thermal state.These power control cannot be configured by  
the user and should be known in case the Notebook PC should  
enter these states.The following temperatures represent the chassis  
temperature (not CPU).  
The fan turns ON for active cooling when the temperature reaches  
the safe upper limit.  
The CPU decreases speed for passive cooling when the temperature  
exceeds the safe upper limit.  
The system shut down for critical cooling when temperature ex-  
ceeds the maximum safe upper limit.  
Notebook PC User Manual  
37  
 
Special Keyboard Functions  
Colored Hot Keys  
The following defines the colored hot keys  
on the Notebook PC’s keyboard.The colored  
commands can only be accessed by first  
pressing and holding the function key while  
pressing a key with a colored command.  
The Hot Key locations on the function keys may vary depending  
on model but the functions should remain the same. Follow the  
icons instead of the function keys.  
“ZZ” Icon (F1): Places the Notebook PC in suspend mode  
(either Save-to-RAM or Save-to-Disk depending on sleep  
button setting in power management setup).  
Radio Tower (F2): Wireless Models Only:Toggles the  
internal wireless LAN or Bluetooth (on selected models)  
ON or OFF with an on-screen-display.When enabled,  
the corresponding wireless indicator will light.Windows  
software settings are necessary to use the wireless LAN  
or Bluetooth.  
Sun Down Icon (F5): Decreases the display brightness  
Sun Up Icon (F6): Increases the display brightness  
LCD Icon (F7):Toggles the display panel ON and OFF.(On  
certain models;stretches the screen area to fill the entire  
display when using low resolution modes.)  
LCD/Monitor Icons (F8): Toggles between the Notebook  
PC’s LCD display and an external monitor in this series:  
LCD Only -> CRT Only (External Monitor) -> LCD + CRT  
Clone -> LCD + CRT Extend. (This function does not  
work in 256 Colors, select High Color in Display Property  
Settings.) NOTE: Must connect an external monitor  
“before” booting up.  
38  
Notebook PC User Manual  
 
Crossed-out Touchpad (F9):Toggles the built-in  
touchpad LOCKED (disabled) and UNLOCKED (enabled).  
Locking the touchpad will prevent you from accidentally  
moving the pointer while typing and is best used with an  
external pointing device such as a mouse. NOTE: Selected  
models have an indicator between the touchpad buttons  
will light when the touchpad is UNLOCKED (enabled) and  
not light when the touchpad is LOCKED (disabled).  
Crossed Speaker Icons (F10): Toggles the speakers ON  
and OFF (only in Windows OS)  
Speaker Down Icon (F11):  
Decreases the speaker volume (only in Windows OS)  
Speaker Up Icon (F12):  
Increases the speaker volume (only in Windows OS)  
Fn+C: TogglesSplendid Video Intelligent Technology”  
function ON and OFF.This allows switching between  
different display color enhancement modes in order  
to improve contrast, brightness, skin tone, and color  
saturation for red, green, and blue independently.You  
can see the current mode through the onscreen display  
(OSD).  
Fn+V: TogglesLife Framesoftware application.  
Power4Gear Hybrid (Fn+Space Bar): This key toggles  
power savings between various power saving modes.  
The power saving modes control many aspects of the  
Notebook PC to maximize performance versus battery  
time. Applying or removing the power adapter will  
automatically switch the system between AC mode and  
battery mode.You can see the current mode through the  
on-screen display (OSD).  
Notebook PC User Manual  
39  
Fn+Enter (extended keyboard): Toggles Windows  
“Calculatorapplication.  
Microsoft Windows Keys  
There are two special Windows keys on the keyboard as described  
below.  
The key with the Windows Logo activates the Start menu  
located at the bottom left of the Windows desktop.  
The other key, that looks like a Windows menu with  
a small pointer, activates the properties menu and is  
equivalent to pressing the right mouse button on a  
Windows object.  
Extended Keyboard  
The extended keyboard  
has a dedicated numeric  
keypad for easy number  
entry. Use [Num Lk / Scr  
Lk] to toggle between  
using the extended  
keypad as numbers or  
as pointer directions.The  
pointer direction keys are  
for navigation between fields  
or cells such as those in a  
spreadsheet or table.  
40  
Notebook PC User Manual  
 
Multimedia Control Keys (on selected models)  
The multimedia control keys allows for convenient controlling of the  
multimedia application.The following defines the meaning of each  
multimedia control key on the Notebook PC.  
Some control key functions may defer depending on Notebook  
PC model.  
Use the [Fn] key in combination with the arrow keys for  
multimedia control functions.  
Play/Pause ()  
Begins or pauses media file playback.  
Stop ()  
Stops media file playback.  
Back ()  
During media file playback, goes back to the previous  
song / movie chapter.  
Forward (  
)
During media file playback, skips to the next song /  
movie chapter.  
Notebook PC User Manual  
41  
 
Switches and Status Indicators  
Switches  
Power4Gear Key (on selected models)  
Under the Windows OS, this key functions as the Power4Gear  
Hybrid key.The key toggles power savings between various  
power saving modes.The power saving modes control many  
aspects of the Notebook PC to maximize performance versus  
battery time. Applying or removing the power adapter will  
automatically switch the system between AC mode and battery  
mode.The selected mode is shown on the display.  
Power Switch  
The power switch allows powering ON and OFF the Notebook  
PC and recovering from STD. Use the switch once to turn ON  
and once to turn OFF the Notebook PC.The power switch only  
works when the display panel is opened.  
42  
Notebook PC User Manual  
 
Status Indicators  
Power Indicator  
The power indicator lights when the Notebook PC is turned ON  
and blinks slowly when the Notebook PC is in the Suspend-to-  
RAM (Sleep) mode.This indicator is OFF when the Notebook PC  
is turned OFF or in the Suspend-to-Disk (Hibernation) mode.  
Battery Charge Indicator (dual-color)  
The dual-color battery charge indicator shows the status of the  
battery’s power as follows:  
Green ON: Battery power is between 95% and 100% (with AC  
power).  
Orange ON: Battery power is less than 95% (with AC power).  
Orange Blinking: Battery power is less than 10% (without AC  
power).  
Off: Battery power is between 10% and 100% (without AC  
power).  
Notebook PC User Manual  
43  
 
Drive Activity Indicator  
Indicates that the Notebook PC is accessing one or more storage  
device(s) such as the hard disk.The light flashes proportional to  
the access time.  
Bluetooth / Wireless Indicator  
This is only applicable on models with internal Bluetooth (BT)  
and built-in wireless LAN.This indicator will light to show that  
the Notebook PC’s built-in Bluetooth (BT) function is activated.  
When the built-in wireless LAN is enabled, this indicator will also  
light. (Windows software settings are necessary.)  
Number Lock Indicator  
Indicates that number lock [Num Lk] is activated when lighted.  
Number lock allows some of the keyboard letters to act as  
numbers for easier numeric data input.  
Capital Lock Indicator  
Indicates that capital lock [Caps Lock] is activated when lighted.  
Capital lock allows some of the keyboard letters to type using  
capitalized letters (e.g. A, B, C).When the capital lock light is OFF,  
the typed letters will be in the lower case form (e.g. a,b,c).  
44  
Notebook PC User Manual  
Chapter 4:  
Using the Notebook PC  
4
 
Pointing Device  
The Notebook PC’s integrated touchpad pointing device is fully  
compatible with all two/three-button and scrolling knob PS/2 mice.  
The touchpad is pressure sensitive and contains no moving parts;  
therefore, mechanical failures can be avoided. A device driver is still  
required for working with some application software.  
Pointer Movement  
Right Click  
Left Click  
IMPORTANT! DO NOT use any objects in place of your finger  
to operate the touchpad or else damage may occur to the  
touchpad’s surface.  
46  
Notebook PC User Manual  
 
Using the Touchpad  
The touchpad allows you to use your fingers to move the pointer  
around or select onscreen items instead of using a standard  
mouse.To use the touchpad, lightly press or tap your finger on the  
touchpad.  
Moving The Pointer  
Place your finger in the center of the touchpad and slide in a  
direction to move the pointer.  
Slide finger forward  
Slide finger  
left  
Slide finger  
right  
Slide finger  
backward  
Notebook PC User Manual  
47  
 
Touchpad Usage Illustrations  
Clicking/Tapping -With the pointer over an item,press the left button  
or use your fingertip to touch the touchpad lightly,keeping your finger  
on the touchpad until the item is selected.The selected item will change  
color.The following two examples produce the same results.  
Tapping  
Clicking  
Press the left pointer button  
and release.  
Lightly but rapidly strike the  
touchpad.  
Double-clicking/Double-tapping -These actions allows you to launch  
your selected program. Move your finger over the program that you  
want to launch, press the left button or tap the pad twice in rapid  
succession, and the system launches your selected program. If the  
interval between the clicks or taps is too long, the operation will not  
be executed. You can set the double-click speed using the Windows  
Control Panel“Mouse.”The following two examples produce the same  
results.  
Double-  
Tapping  
Double-  
Clicking  
Press the left button twice  
and release.  
Lightly but rapidly strike the  
touchpad twice.  
48  
Notebook PC User Manual  
 
Dragging - Dragging refers to moving an item to another location.  
Move your finger over an item, while simultaneously pressing the left  
button, move the item to your desired location, then release the left  
button. You can also double-tap and hold the item while dragging it  
with your finger.The following illustrations produce the same results.  
Dragging-Clicking  
Dragging-Tapping  
Hold left button and slide  
finger on touchpad.  
Lightly strike the touchpad  
twice, sliding finger on touchpad  
during second strike.  
Two-finger scrolling - Use two fingertips to slide up/down/left/  
right on the touchpad to scroll a window up/down/left/right. If your  
display window includes several sub-windows, move the pointer on  
that pane before scrolling.  
Scrolling  
Scrolling vertically  
horizontally  
Two-finger zooming in/out - Moving two fingertips apart or  
together on the touchpad to zoom in or zoom out.This is convenient  
when viewing photos or reading documents.  
Zoom in  
Zoom out  
Notebook PC User Manual  
49  
Two-finger tapping - Use two  
fingers to tap the touchpad.This  
action simulates the click on the  
scroll wheel of a mouse.  
Three-finger tapping -  
Use three fingers to tap the  
touchpad.This action mimics the  
right-click function of a mouse.  
Two-finger rotating- Fix one  
fingertip on the touchpad and  
make an arc with the other  
to rotate the photo or the  
document you are viewing.  
You can make a clockwise or  
counterclockwise rotation based  
on your needs.  
50  
Notebook PC User Manual  
Caring for the Touchpad  
The touchpad is pressure sensitive. If not properly cared for, it can be  
easily damaged.Take note of the following precautions.  
Ensure the touchpad does not come into contact with dirt, liquids or  
grease.  
Do not touch the touchpad if your fingers are dirty or wet.  
Do not rest heavy objects on the touchpad or the touchpad  
buttons.  
Do not scratch the touchpad with your finger nails or any hard  
objects.  
The touchpad responds to movement not to force.There is no need  
to tap the surface too hard. Tapping too hard does not increase  
the responsiveness of the touchpad.The touchpad responds best  
to light pressure.  
Automatic Touchpad Disabling  
Windows can automatically disable the Notebook PC’s touchpad  
when an external USB mouse is attached.  
This feature is normally OFF, to turn ON this feature:  
1. Select the option in Windows Control Panel > Hardware and  
Sound > Mouse.  
Notebook PC User Manual  
51  
 
2. Click ELAN on the top and click Disable when external USB  
pointing device plug in check box.  
3. Click OK to finish the configuration.  
52  
Notebook PC User Manual  
Storage Devices  
Storage devices allow the Notebook PC to read or write documents,  
pictures, and other files to various data storage devices.  
Flash Memory Card Reader  
Normally a memory card reader must be purchased separately in  
order to use memory cards from devices such as digital cameras,  
MP3 players, mobile phones, and PDAs.This Notebook PC has a  
single built-in memory card reader that can use many flash memory  
cards as shown in the example below.The built-in memory card  
reader is not only convenient, but also faster than most other  
forms of memory card readers because it utilizes the internal high-  
bandwidth PCI bus.  
IMPORTANT! Flash memory card compatibility varies depending  
on Notebook PC model and flash memory card specifications.  
Flash memory card specifications constantly change so  
compatibility may change without warning.  
SD / MMC  
MS / MS Pro  
The actual location of the Flash Memory Slot differs by models.  
Refer to the previous chapter to locate the Flash Memory Slot.  
IMPORTANT! Never remove cards while or immediately after  
reading, copying, formatting, or deleting data on the card or else  
data loss may occur.  
WARNING! To prevent data loss, useSafely Remove Hardware  
and Eject Mediain the Windows  
notification area before removing  
the flash memory card.  
Notebook PC User Manual  
53  
 
Memory (RAM)  
Additional memory will increase application performance by  
decreasing hard disk access.Visit an authorized service center or  
retailer for information on memory upgrades for your Notebook PC.  
Only purchase expansion modules from authorized retailers of this  
Notebook PC to ensure maximum compatibility and reliability.  
The BIOS automatically detects the amount of memory in the  
system and configures CMOS accordingly during the POST (Power-  
On-Self-Test) process.There is no hardware or software (including  
BIOS) setup required after the memory is installed.  
WARNING! Disconnect all  
the connected peripherals,  
any telephone or  
telecommunication lines  
and power connector  
(such as external power  
supply, battery pack,  
etc.) before installing or  
removing a memory.  
The actual location of the memory differs by models. Refer to the  
previous chapter to locate the memory.  
Installing a Memory Card:  
Removing a Memory Card:  
3
(This is only an example.)  
(This is only an example.)  
54  
Notebook PC User Manual  
 
Connections  
The built-in network cannot be installed later as an upgrade.  
After purchase, network can be installed as an expansion card.  
Network Connection  
Connect a network cable, with RJ-45 connectors on each end, to the  
modem/network port on the Notebook PC and the other end to a  
hub or switch. For 100 BASE-TX / 1000 BASE-T speeds, your network  
cable must be category 5 or better (not category 3) with twisted-pair  
wiring. If you plan on running the interface at 100/1000Mbps, it must  
be connected to a 100 BASE-TX / 1000 BASE-T hub (not a BASE-T4  
hub). For 10Base-T, use category 3, 4, or 5 twisted-pair wiring. 10/100  
Mbps Full-Duplex is supported on this Notebook PC but requires  
connection to a network switching hub withduplexenabled.The  
software default is to use the fastest setting so no user-intervention  
is required.  
1000BASE-T (or Gigabit) is only supported on selected models.  
Notebook PC User Manual  
55  
 
Twisted-Pair Cable  
The cable used to connect the Ethernet card to a host (generally  
a Hub or Switch) is called a straight-through Twisted Pair Ethernet  
(TPE).The end connectors are called RJ-45 connectors, which are  
not compatible with RJ-11 telephone connectors. If connecting two  
computers together without a hub in between, a crossover LAN  
cable is required (Fast-Ethernet model). (Gigabit models support  
auto-crossover so a crossover LAN cable is optional.)  
Example of the Notebook PC connected to a Network Hub or Switch  
for use with the built-in Ethernet controller.  
Network cable with  
RJ-45 connectors  
Network Hub or Switch  
The actual location of the LAN port differs by models. Refer to  
the previous chapter to locate the LAN port.  
56  
Notebook PC User Manual  
Wireless LAN Connection (on selected models)  
The optional built-in wireless LAN is a compact easy-to-use wireless  
Ethernet adapter. Implementing the IEEE 802.11 standard for  
wireless LAN (WLAN), the optional built-in wireless LAN is capable of  
fast data transmission rates using Direct Sequence Spread Spectrum  
(DSSS) and Orthogonal Frequency Division Multiplexing (OFDM)  
technologies on 2.4GHz/5GHz frequencies.The optional built-in  
wireless LAN is backward compatible with the earlier IEEE 802.11  
standards allowing seamless interfacing of wireless LAN standards.  
The optional built-in wireless LAN is a client adapter that supports  
Infrastructure and Ad-hoc modes giving you flexibility on your  
existing or future wireless network configurations for distances up to  
40 meters between the client and the access point.  
To provide efficient security to your wireless communication, the  
optional built-in wireless LAN comes with a 64-bit/128-bit Wired  
Equivalent Privacy (WEP) encryption and Wi-Fi Protected Access  
(WPA) features.  
For security concerns, DO NOT connect to the unsecured  
network; otherwise, the information transmission without  
encryption might be visible to others.  
Notebook PC User Manual  
57  
 
Ad-hoc mode  
The Ad-hoc mode allows the Notebook PC to connect to another  
wireless device. No access point (AP) is required in this wireless  
environment.  
(All devices must install  
Notebook PC  
Desktop PC  
optional 802.11 wireless  
LAN adapters.)  
PDA  
Infrastructure mode  
The Infrastructure mode allows the Notebook PC and other wireless  
devices to join a wireless network created by an Access Point (AP)  
(sold separately) that provides a central link for wireless clients to  
communicate with each other or with a wired network.  
(All devices must install  
Notebook PC  
Desktop PC  
optional 802.11 wireless  
LAN adapters.)  
Access Point  
PDA  
58  
Notebook PC User Manual  
Windows Wireless Network Connection  
Connecting to a network  
1. Switch ON the Wireless function if necessary for your model (see  
switches in Chapter 3).  
2. Press [FN+F2] repeatedly  
until wireless LAN icon and  
Bluetooth icon are shown.  
Or double click the Wireless  
Console icon in Windows  
notification area and select the  
wireless LAN icon.  
3. Click the wireless network icon with an orange star  
Windows® Notification area.  
in the  
4. Select the wireless access  
point you want to connect  
to from the list and click  
Connect to build the  
connection.  
If you cannot find the  
desired access point, click  
the Refresh icon on  
the upper right corner to  
refresh and search in the  
list again.  
Notebook PC User Manual  
59  
 
5. When connecting, you may have to enter a password.  
6. After a connection has been established, the connection is  
shown on the list.  
7. You can see the wireless network icon  
area.  
in the Notification  
The crossed wireless network icon  
appears when you press  
<Fn> + <F2> to disable the WLAN function.  
60  
Notebook PC User Manual  
Bluetooth Wireless Connection  
(on selected models)  
Notebook PCs with Bluetooth technology eliminates the need for  
cables for connecting Bluetooth-enabled devices. Examples of  
Bluetooth-enabled devices may be Notebook PCs, Desktop PCs,  
mobile phones, and PDAs.  
If your Notebook PC did not come with built-in Bluetooth, you  
need to connect a USB or ExpressCard Bluetooth module in  
order to use Bluetooth.  
Bluetooth-enabled mobile phones  
You can wireless connect to your mobile phone. Depending on  
your mobile phone’s capabilities, you can transfer phone book  
data, photos, sound files, etc. or use it as a modem to connect to the  
Internet.You may also use it for SMS messaging.  
Bluetooth-enabled computers or PDAs  
You can wireless connect to another computer or PDA and exchange  
files, share peripherals, or share Internet or network connections.  
You may also make use of Bluetooth-enabled wireless keyboard or  
mouse.  
Turning ON and Launching Bluetooth Utility  
This process can be used to add most Bluetooth devices.  
1. Switch ON the Wireless function if necessary for your model (see  
switches in Chapter 3).  
2. Press [FN+F2] repeatedly  
until wireless LAN icon and  
bluetooth icon are shown.  
Notebook PC User Manual  
61  
 
Or double click the Wireless  
Console icon in the Windows  
notification area and select the  
Bluetooth icon.  
3. From Control Panel, go  
to Network and Internet  
> Network and Sharing  
Center and then click  
Change adapter settings in  
the left blue pane.  
4. Right-click Bluetooth  
Network Connection and  
select View Bluetooth  
Network Devices.  
5. Click Add a device to look for  
new devices.  
62  
Notebook PC User Manual  
6. Select a Bluetooth-enabled  
device from the list and click  
Next.  
7. Enter the Bluetooth security  
code into your device and  
start pairing.  
8. The paired relationship is  
successfully built. Click Close  
to finish the setting.  
Notebook PC User Manual  
63  
64  
Notebook PC User Manual  
Appendix  
A
 
Optional Accessories  
These items, if desired, come as optional items to complement your  
Notebook PC.  
USB Hub (Optional)  
Attaching an optional USB hub will increase your USB ports and  
allow you to quickly connect or disconnect many USB peripherals  
through a single cable.  
USB Flash Memory Disk  
A USB flash memory disk is an optional item that can provide  
storage up to several hundred megabytes, higher transfer speeds,  
and greater durability.When used in current operating systems, no  
drivers are necessary.  
USB Floppy Disk Drive  
An optional USB-interface floppy disk drive can accept a standard  
1.44MB (or 720KB) 3.5-inch floppy diskette.  
WARNING! To prevent system failures, use WindowsSafely  
Remove Hardwareon the taskbar before disconnecting the USB  
floppy disk drive. Eject the floppy disk before transporting the  
Notebook PC to prevent damage from shock.  
Optional Connections  
These items, if desired, may be purchased from third-parties.  
USB Keyboard and Mouse  
Attaching an external USB keyboard will allow data entry to be more  
comfortable. Attaching an external USB mouse will allow Windows  
navigation to be more comfortable. Both the external USB keyboard  
and mouse will work simultaneously with the Notebook PC’s built-in  
keyboard and touchpad.  
Printer Connection  
One or more USB printers can be simultaneously used on any USB  
port or USB hub.  
A-2  
Notebook PC User Manual  
 
Operating System and Software  
This Notebook PC may offer (depending on territory) its customers  
the choice of a pre-installed Microsoft Windows operating system.  
The choices and languages will depend on the territory.The levels  
of hardware and software support may vary depending on the  
installed operating system.The stability and compatibility of other  
operating systems cannot be guaranteed.  
Support Software  
This Notebook PC comes with a support disc that provides BIOS,  
drivers and applications to enable hardware features, extend  
functionality, help manage your Notebook PC, or add functionality  
not provided by the native operating system. If updates or  
replacement of the support disc is necessary, contact your dealer for  
web sites to download individual software drivers and utilities.  
The support disc contains all drivers, utilities and software for all  
popular operating systems including those that have been pre-  
installed.The support disc does not include the operating system  
itself.The support disc is necessary even if your Notebook PC came  
pre-configured in order to provide additional software not included  
as part of the factory pre-install.  
A recovery disc is optional and includes an image of the original  
operating system installed on the hard drive at the factory.The  
recovery disc provides a comprehensive recovery solution that  
quickly restores the Notebook PC’s operating system to its original  
working state provided that your hard disk drive is in good working  
order. Contact your retailer if you require such a solution.  
Some of the Notebook PC’s components and features may not  
work until the device drivers and utilities are installed.  
Notebook PC User Manual  
A-3  
 
System BIOS Settings  
The BIOS screens in this section are for reference only.The actual  
screens may differ by models and territories.  
Boot Device  
1. On the Boot screen, select Boot Option #1.  
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.  
Main Advanced Boot Security Save & Exit  
Set the system boot order.  
Boot Configuration  
UEFI Boot  
PXE ROM  
[Disabled]  
[Disabled]  
Boot Option Priorities  
Boot Option #1  
Boot Option #2  
[P0: ST9640423AS ...]  
[P2: TSSTcorp CDDVD...]  
Hard Drive BBS Priorities  
CD/DVD ROM Drive BBS Priorities  
Delete Boot Option  
:
Select Screen  
Select Item  
:
Enter: Select  
+/—: Change Opt.  
F1:  
F9:  
General Help  
Optimized Defaults  
F10: Save ESC: Exit  
Version 2.01.1204. Copyright (C) 2010 American Megatrends, Inc.  
2. Press [Enter] and select a device as the Boot Option #1.  
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.  
Main Advanced Boot Security Save & Exit  
Set the system boot order.  
Boot Configuration  
UEFI Boot  
PXE ROM  
[Disabled]  
[Disabled]  
Boot Option Priorities  
Boot Option #1  
Boot Option #2  
[P0: ST9640423AS ...]  
[P2: TSSTcorp CDDVD...]  
Hard Drive BBS Priorities  
CD/DVD ROM Drive BBS Priorities  
Delete Boot Option  
:
Select Screen  
Select Item  
Boot Option #1  
:
P0: ST9640423AS  
Enter: Select  
P2: TSSTcorp CDDVDW TS-U633A  
Disabled  
+/—: Change Opt.  
F1:  
F9:  
General Help  
Optimized Defaults  
F10: Save ESC: Exit  
Version 2.01.1204. Copyright (C) 2010 American Megatrends, Inc.  
A-4  
Notebook PC User Manual  
 
Security Setting  
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.  
Main Advanced Boot Security Save & Exit  
Password Description  
Set the system boot order.  
If ONLY the Administrator’s password is set,  
then this only limits access to Setup and is  
only asked for when entering Setup.  
If ONLY the user’s password is set, then this  
is a power on password and must be entered to  
boot or enter Setup. In Setup, the User will  
have Administrator rights.  
:
Select Screen  
Select Item  
Administrator Password  
User Password Status  
NOT INSTALLED  
NOT INSTALLED  
:
Enter: Select  
+/—: Change Opt.  
Setup administrator password  
User Password  
F1:  
F2:  
F9:  
General Help  
Previous Values  
Optimized Defaults  
HDD User Password Status  
Set Master Password  
Set User Password  
:
NOT INSTALLED  
F10: Save ESC: Exit  
I/O Interface Security  
Version 2.01.1204. Copyright (C) 2010 American Megatrends, Inc.  
To set the password:  
1. On the Security screen, select Setup Administrator Password  
or User Password.  
2. Type in a password and press [Enter].  
3. Re-type to confirm the password and press [Enter].  
4. Password is then set.  
To clear the password:  
1. On the Security screen, select Setup Administrator Password  
or User Password.  
2. Enter the current password and press [Enter].  
3. Leave the Create New Password field blank and press [Enter].  
4. Leave the Confirm New Password field blank and press [Enter].  
5. Password is then cleared.  
Notebook PC User Manual  
A-5  
Save Changes  
If you want to keep your configuration settings, you must save  
changes before exiting the BIOS setup utility.  
If you want to restore default settings, choose Restore Defaults.You  
must then save changes to keep the manufacture default settings.  
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.  
Main Advanced Boot Security Save & Exit  
Exit system setup after saving  
Save Changes and Exit  
the changes.  
Discard Changes and Exit  
Save Options  
Save Changes  
Discard Changes  
Restore Defaults  
Boot Override  
P0: ST9640423AS  
:
Select Screen  
Select Item  
:
P2: TSSTcorp CDDVDW TS-U633A  
Enter: Select  
+/—: Change Opt.  
Launch EFI Shell from filesystem device  
F1:  
F9:  
General Help  
Optimized Defaults  
F10: Save ESC: Exit  
Version 2.01.1204. Copyright (C) 2010 American Megatrends, Inc.  
A-6  
Notebook PC User Manual  
Common Problems and Solutions  
Hardware Problem - Optical Disc  
The optical disc drive is not able to read or write discs.  
1. Update the BIOS to the latest version and try again.  
2. If updating the BIOS does not help, try better quality discs and  
try again.  
3. If the problem still exist, contact your local service center and  
ask an engineer for assistance.  
Unknown Reason - System Unstable  
Cannot wake up from the hibernation.  
1. Remove upgraded parts (RAM, HDD,WLAN, BT) if they were  
installed after purchase.  
2. If not the case, try MS System Restore to an earlier date.  
3. If problem still persists, try restoring your system using the  
recovery partition or DVD.  
You must backup all your data to another location before  
recovering.  
4. If the problem still exist, contact your local service center and  
ask an engineer for assistance.  
Hardware Problem - Keyboard / Hotkey  
The Hotkey (FN) is disabled.  
A. Reinstall theATK0100driver from the driver CD or download it  
from the ASUS website.  
Notebook PC User Manual  
A-7  
 
Hardware Problem - Built-in Camera  
The built-in camera does not work correctly.  
1. CheckDevice Managerto see if there are any problems.  
2. Try reinstalling the webcam driver to solve the problem.  
3. If the problem is not solved, update the BIOS to the latest  
version and try again.  
4. If the problem still exist, contact your local service center and  
ask an engineer for assistance.  
Hardware Problem - Battery  
Battery maintenance.  
1. Register the Notebook PC for a one-year-warranty using the  
following website:  
http://member.asus.com/login.aspx?SLanguage=en-us  
2. Do NOT remove the battery pack while using the Notebook  
PC with the AC adaptor to prevent damage caused by the  
accidental power loss.The ASUS battery pack has protection  
circuitry to prevent over-charging so it will not damage the  
battery pack if it is left in the Notebook PC.  
Hardware Problem - Power ON/OFF Error  
I cannot power ON the Notebook PC.  
Diagnostics:  
1. Power On by Battery only? (Y = 2, N = 4)  
2. Able to see BIOS (ASUS Logo)? (Y = 3, N = A)  
3. Able to load the OS? (Y = B, N = A)  
4. Adapter power LED ON? (Y = 5, N = C)  
5. Power ON by Adapter only? (Y = 6, N = A)  
6. Able to see BIOS (ASUS Logo)? (Y = 7, N = A)  
7. Able to load the OS? (Y = D, N = A)  
A-8  
Notebook PC User Manual  
Symptom & Solutions:  
A. Problem might be in the MB, HDD, or NB; visit a local service center  
for assistance.  
B. Problem caused by the operating system, try restoring your system us-  
ing the recovery partition or disc.  
IMPORTANT! You must backup all your data to another location  
before recovering.  
C. Adapter problem; check the power cord connections, otherwise visit  
a local service center for replacement.  
D. Battery problem; please check the battery contacts, otherwise visit a  
local service center for repair.  
Hardware Problem - Wireless Card  
How to check whether a Notebook PC is equipped with a wireless  
card?  
A. Enter Control Panel -> Device Manager.You will see whether  
the Notebook PC has a WLAN card under theNetwork Adapter”  
item.  
Mechanical Problem - FAN / Thermal  
Why is the cooling fan always ON and the temperature high?  
1. Make sure that the FAN works when the CPU temperature is  
high and check whether there is air flow from the main air vent.  
2. If you have many applications running (see taskbar), close them  
to decrease system load.  
3. The problem may also be caused by some viruses, use anti-virus  
software to detect them.  
4. If none of the above help, try restoring your system using the  
recovery partition or DVD.  
IMPORTANT! You must backup all your data to another location  
before recovering.  
Notebook PC User Manual  
A-9  
CAUTION! DO NOT connect to the Internet before you have  
installed an anti-virus software and Internet firewall to protect  
yourself from viruses.  
Software Problem - ASUS bundled software  
When I power ON the Notebook PC, there will be anOpen policy file  
errormessage.  
A. Reinstall the latest versionPower4 Gearutility to solve your  
problem. It is available on the ASUS website.  
Unknown Reason - Blue screen with white text  
A blue screen with white text appears after system bootup.  
1. Remove additional memory. If additional memory was installed  
after purchase, power OFF, remove the additional memory, and  
power ON to see if the problem is due to incompatible memory.  
2. Un-install software applications. If you have installed software  
applications recently, they may not be compatible with your  
system.Try to un-install them in Windows Safe Mode.  
3. Check your system for viruses.  
4. Update the BIOS to the latest version with Easy Flash in  
Windows or AFLASH in DOS mode.These utilities and BIOS files  
can be downloaded from the ASUS website.  
WARNING! Ensure your Notebook PC does not lose power during  
the BIOS flashing process.  
A-10  
Notebook PC User Manual  
5. If problem still cannot be solved, use the recovery process to  
reinstall your entire system.  
IMPORTANT! You must backup all your data to another location  
before recovering.  
CAUTION! DO NOT connect to the Internet before you have  
installed an anti-virus software and Internet firewall to protect  
yourself from viruses.  
Ensure that you install theIntel INF UpdateandATKACPI”  
drivers first so that hardware devices can be recognized.  
6. If the problem still exist, contact your local service center and  
ask an engineer for assistance.  
Notebook PC User Manual  
A-11  
Software Problem - BIOS  
Updating the BIOS.  
1. Please verify the Notebook PC’s exact model and download the  
latest BIOS file for your model from the ASUS website and save  
it in your flash disk drive.  
2. Connect your flash disk drive to the Notebook PC and power on  
the Notebook PC.  
3. Use theStart Easy Flashfunction on the Advanced page of the  
BIOS Setup Utility. Follow the instructions shown.  
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.  
Main Advanced Boot Security Save & Exit  
Press ENTER to run the utility  
to select and update BIOS.  
ASUS FancyStart  
POST Logo Type  
[Disabled]  
[Static]  
Start Easy Flash  
Play POST Sound  
Speaker Volume  
Internal Pointing Device  
[No]  
[4]  
[Enabled]  
Intel Virtualization Technology  
Legacy USB Support  
USB CHARGE  
[Enabled]  
[Enabled]  
[Disable]  
:
Select Screen  
Select Item  
SATA Configuration  
:
Intel(R) AT Configurations  
Enter: Select  
+/—: Change Opt.  
F1:  
F9:  
General Help  
Optimized Defaults  
F10: Save ESC: Exit  
Version 2.01.1204. Copyright (C) 2010 American Megatrends, Inc.  
4. Locate the latest BIOS file and start updating (flashing) the BIOS.  
ASUS Tek. Easy Flash Utility  
FLASH TYPE: Generic Flash Type  
Current Platform  
Platform: U56E  
Version: 103  
New Platform  
Platform: Unkown  
Version: Unkown  
Build Date: Unkown  
Build Date: Sep 16 2010  
FS0  
FS1  
FS2  
[
]: Switch  
[
] : Choose [q] : Exit  
5. You mustRestore Defaultson the Exit page after updating  
(flashing) the BIOS.  
A-12  
Notebook PC User Manual  
Recovering Your Notebook PC  
Using Recovery Partition  
The Recovery Partition quickly restores your Notebook PC’s software  
to its original working state. Before using the Recovery Partition, copy  
your data files (such as Outlook PST files) to USB storage devices or  
to a network drive and make note of any customized configuration  
settings (such as network settings).  
About the Recovery Partition  
The Recovery Partition is a reserved space on your hard disk drive  
used to restore the operating system, drivers, and utilities installed  
on your Notebook PC at the factory.  
IMPORTANT! DO NOT delete the partition named RECOVERY.  
The Recovery Partition is created at the factory and cannot be  
restored if deleted.Take  
your Notebook PC to an  
authorized ASUS service  
center if you have problems  
with the recovery process.  
Using the Recovery Partition:  
1. Press [F9] during bootup.  
2. Press [Enter] to select Windows Setup [EMS Enabled].  
3. Select the language you want to recover and click Next.  
4. Read the ASUS Preload Wizard messages and click Next.  
5. Select a partition option and click Next. Partition options:  
Recover Windows to first partition only.  
This option deletes only the first partition and allows you to keep other  
partitions,and to create a new system partition as driveC.  
Recover Windows to entire HD.  
This option deletes all partitions from your hard disk drive and creates  
a new system partition as driveC.  
Notebook PC User Manual  
A-13  
 
Recover Windows to entire HD with two partitions.  
This option deletes all partitions from your hard drive and creates two  
new partitionsC”(40%) and“D”(60%).  
6. Follow the onscreen instructions to complete the recovery  
process.  
Visit the ASUS website at www.asus.com for updated drivers and  
utilities.  
Using Recovery DVD (on selected models)  
Creating the Recovery DVD:  
1. Double-click the AI Recovery Burner icon on the Window  
desktop.  
2. Insert a blank  
writable DVD  
into the optical  
drive and click  
Start to start  
creating the  
Recovery DVD.  
3. Follow the onscreen instructions to complete creating the  
recovery DVD.  
Prepare enough blank writable DVDs as instructed to create the  
Recovery DVD.  
IMPORTANT! Remove the external hard disk drive before  
performing system recovery on your Notebook PC. According  
to Microsoft, you may lose important data because of setting up  
Windows on the wrong disk drive or formatting the incorrect  
drive partition.  
A-14  
Notebook PC User Manual  
 
Using the Recovery DVD:  
1. Insert the Recovery DVD into the optical drive.Your Notebook  
PC needs to be powered ON.  
2. Restart the Notebook PC and press [Esc] on bootup and select  
the optical drive (may be labeled asCD/DVD”) and press [Enter]  
to boot from the Recovery DVD.  
3. Select OK to start to restore the image.  
4. Select OK to confirm the system recovery.  
Restoring will overwrite your hard drive. Ensure to back up all  
your important data before the system recovery.  
5. Follow the onscreen instructions to complete the recovery  
process.  
WARNING: DO NOT remove the Recovery disc, unless instructed  
to do so, during the recovery process or else your partitions will  
be unusable.  
Ensure to connect the power adapter to your Notebook PC when  
performing system recovery. Unstable power supply may cause  
recovery failure.  
Visit the ASUS website at www.asus.com for updated drivers and  
utilities.  
Notebook PC User Manual  
A-15  
DVD-ROM Drive Information  
The Notebook PC comes with an optional DVD-ROM drive or a  
CD-ROM drive. In order to view DVD titles, you must install your  
own DVD viewer software. Optional DVD viewer software may be  
purchased with this Notebook PC.The DVD-ROM drive allows the  
use of both CD and DVD discs.  
Regional Playback Information  
Playback of DVD movie titles involves decoding MPEG2 video, digital  
AC3 audio and decryption of CSS protected content. CSS (sometimes  
called copy guard) is the name given to the content protection  
scheme adopted by the motion picture industry to satisfy a need to  
protect against unlawful content duplication.  
Although the design rules imposed on CSS licensors are many, one rule  
that is most relevant is playback restrictions on regionalized content. In  
order to facilitate geographically staggered movie releases, DVD video  
titles are released for specific geographic regions as defined in “Region  
Definitions” below. Copyright laws require that all DVD movies be  
limited to a particular region (usually coded to the region at which it is  
sold). While DVD movie content may be released for multiple regions,  
CSS design rules require that any system capable of playing CSS  
encrypted content must only be capable of playing one region.  
The region setting may be changed up to five times using the  
viewer software, then it can only play DVD movies for the last  
region setting. Changing the region code after that will require  
factory resetting which is not covered by warranty. If resetting  
is desired, shipping and resetting costs will be at the expense of  
the user.  
A-16  
Notebook PC User Manual  
 
Region Definitions  
Region 1  
Canada, US, US Territories  
Region 2  
Czech, Egypt, Finland, France, Germany, Gulf States, Hungary, Iceland,  
Iran, Iraq, Ireland, Italy, Japan, Netherlands, Norway, Poland, Portugal,  
Saudi Arabia, Scotland, South Africa, Spain, Sweden, Switzerland,  
Syria,Turkey, UK, Greece, Former Yugoslav Republics, Slovakia  
Region 3  
Burma, Indonesia, South Korea, Malaysia, Philippines, Singapore,  
Taiwan,Thailand,Vietnam  
Region 4  
Australia, Caribbean (Except US Territories), Central America, New  
Zealand, Pacific Islands, South America  
Region 5  
CIS, India, Pakistan, Rest of Africa, Russia, North Korea  
Region 6  
China  
Notebook PC User Manual  
A-17  
Blu-ray ROM Drive Information  
(on selected models)  
Region Definitions  
Region A  
North, Central and South American countries, and their territories;  
Taiwan, Hong Kong, Macao, Japan, Korea (South and North), South  
East Asian countries and their territories.  
Region B  
European, African, and South West Asian countries and their  
territories; Australia and New Zealand.  
Region C  
Central, South Asian, Eastern European countries and their territories;  
China and Mongolia.  
Refer to Blu-ray Disc website at www.blu-raydisc.com/en/  
Technical/FAQs/Blu-rayDsicforVideo.html for more details.  
A-18  
Notebook PC User Manual  
 
Internal Modem Compliancy  
The Notebook PC with internal modem model complies with  
JATE (Japan), FCC (US, Canada, Korea,Taiwan), and CTR21.The  
internal modem has been approved in accordance with Council  
Decision 98/482/EC for pan-European single terminal connection  
to the public switched telephone network (PSTN). However due  
to differences between the individual PSTNs provided in different  
countries, the approval does not, of itself, give an unconditional  
assurance of successful operation on every PSTN network  
termination point. In the event of problems you should contact your  
equipment supplier in the first instance.  
Overview  
On 4th August 1998 the European Council Decision regarding the  
CTR 21 has been published in the Official Journal of the EC.The CTR  
21 applies to all non voice terminal equipment with DTMF-dialling  
which is intended to be connected to the analogue PSTN (Public  
Switched Telephone Network).  
CTR 21 (Common Technical Regulation) for the attachment  
requirements for connection to the analogue public switched  
telephone networks of terminal equipment (excluding terminal  
equipment supporting the voice telephony justified case service)  
in which network addressing, if provided, is by means of dual tone  
multifrequency signalling.  
Network Compatibility Declaration  
Statement to be made by the manufacturer to the Notified Body and  
the vendor:“This declaration will indicate the networks with which  
the equipment is designed to work and any notified networks with  
which the equipment may have inter-working difficulties”  
Notebook PC User Manual  
A-19  
 
Network Compatibility Declaration  
Statement to be made by the manufacturer to the user:“This  
declaration will indicate the networks with which the equipment  
is designed to work and any notified networks with which the  
equipment may have inter-working difficulties.The manufacturer  
shall also associate a statement to make it clear where network  
compatibility is dependent on physical and software switch settings.  
It will also advise the user to contact the vendor if it is desired to use  
the equipment on another network.”  
Up to now the Notified Body of CETECOM issued several pan-  
European approvals using CTR 21.The results are Europe’s first  
modems which do not require regulatory approvals in each  
individual European country.  
Non-Voice Equipment  
Answering machines and loud-speaking telephones can be eligible  
as well as modems, fax machines, auto-dialers and alarm systems.  
Equipment in which the end-to-end quality of speech is controlled  
by regulations (e.g. handset telephones and in some countries also  
cordless telephones) is excluded.  
A-20  
Notebook PC User Manual  
This table shows the countries currently under the CTR21  
standard.  
Country  
Applied  
More Testing  
Austria1  
Yes  
Yes  
No  
No  
Belgium  
Czech Republic  
Denmark1  
Finland  
No  
Not Applicable  
Yes  
Yes  
Yes  
Yes  
Yes  
No  
Yes  
No  
France  
No  
Germany  
Greece  
No  
No  
Hungary  
Iceland  
Not Applicable  
Yes  
Yes  
Still Pending  
No  
No  
Ireland  
No  
Italy  
Still Pending  
Israel  
No  
Lichtenstein  
Luxemburg  
The Netherlands1  
Norway  
Yes  
Yes  
Yes  
Yes  
No  
No  
No  
Yes  
No  
Poland  
Not Applicable  
Portugal  
Spain  
No  
Not Applicable  
No  
Not Applicable  
Sweden  
Yes  
Yes  
Yes  
No  
No  
No  
Switzerland  
United Kingdom  
Notebook PC User Manual  
A-21  
This information was copied from CETECOM and is supplied without  
liability. For updates to this table, you may visit http://www.cetecom.  
de/technologies/ctr_21.html  
1 National requirements will apply only if the equipment may use  
pulse dialling (manufacturers may state in the user guide that the  
equipment is only intended to support DTMF signalling, which  
would make any additional testing superfluous).  
In The Netherlands additional testing is required for series  
connection and caller ID facilities.  
A-22  
Notebook PC User Manual  
Declarations and Safety Statements  
Federal Communications Commission Statement  
This device complies with FCC Rules Part 15. Operation is subject to  
the following two conditions:  
This device may not cause harmful interference.  
This device must accept any interference received, including  
interference that may cause undesired operation.  
This equipment has been tested and found to comply with the  
limits for a class B digital device, pursuant to Part 15 of the Federal  
Communications Commission (FCC) rules. These limits are designed  
to provide reasonable protection against harmful interference in  
a residential installation. This equipment generates, uses, and can  
radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference  
to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment  
does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the  
user is encouraged to try to correct the interference by one or more of  
the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for  
help.  
The use of a shielded-type power cord is required in order to  
meet FCC emission limits and to prevent interference to the  
nearby radio and television reception. It is essential that only  
the supplied power cord be used. Use only shielded cables to  
connect I/O devices to this equipment.You are cautioned that  
changes or modifications not expressly approved by the party  
responsible for compliance could void your authority to operate  
the equipment.  
Notebook PC User Manual  
A-23  
 
(Reprinted from the Code of Federal Regulations #47, part 15.193, 1993.  
Washington DC: Office of the Federal Register, National Archives and  
Records Administration, U.S. Government Printing Office.)  
FCC Radio Frequency (RF) Exposure Caution  
Statement  
Any changes or modifications not expressly approved by the  
party responsible for compliance could void the user’s authority  
to operate this equipment.“The manufacture declares that  
this device is limited to Channels 1 through 11 in the 2.4GHz  
frequency by specified firmware controlled in the USA.”  
This equipment complies with FCC radiation exposure limits set forth  
for an uncontrolled environment.To maintain compliance with FCC  
RF exposure compliance requirements, please avoid direct contact  
to the transmitting antenna during transmitting. End users must  
follow the specific operating instructions for satisfying RF exposure  
compliance.  
Declaration of Conformity  
(R&TTE directive 1999/5/EC)  
The following items were completed and are considered relevant  
and sufficient:  
Essential requirements as in [Article 3]  
Protection requirements for health and safety as in [Article 3.1a]  
Testing for electric safety according to [EN 60950]  
Protection requirements for electromagnetic compatibility in  
[Article 3.1b]  
Testing for electromagnetic compatibility in [EN 301 489-1] & [EN  
301 489-17]  
Effective use of the radio spectrum as in [Article 3.2]  
Radio test suites according to [EN 300 328-2]  
A-24  
Notebook PC User Manual  
 
CE Mark Warning  
CE marking for devices without wireless LAN/Bluetooth  
The shipped version of this device complies with the requirements  
of the EEC directives 2004/108/ECElectromagnetic compatibility”  
and 2006/95/ECLow voltage directive.  
CE marking for devices with wireless LAN/ Bluetooth  
This equipment complies with the requirements of Directive 1999/5/  
EC of the European Parliament and Commission from 9 March, 1999  
governing Radio and Telecommunications Equipment and mutual  
recognition of conformity.  
IC Radiation Exposure Statement for Canada  
This equipment complies with IC radiation exposure limits set forth  
for an uncontrolled environment.To maintain compliance with IC  
RF exposure compliance requirements, please avoid direct contact  
to the transmitting antenna during transmitting. End users must  
follow the specific operating instructions for satisfying RF exposure  
compliance.  
Operation is subject to the following two conditions:  
This device may not cause interference and  
This device must accept any interference, including interference  
that may cause undesired operation of the device.  
To prevent radio interference to the licensed service (i.e. co-channel  
Mobile Satellite systems) this device is intended to be operated  
indoors and away from windows to provide maximum shielding.  
Equipment (or its transmit antenna) that is installed outdoors is  
subject to licensing.  
Notebook PC User Manual  
A-25  
 
Wireless Operation Channel for Different Domains  
N. America  
Japan  
2.412-2.462 GHz  
2.412-2.484 GHz  
2.412-2.472 GHz  
Ch01 through CH11  
Ch01 through Ch14  
Ch01 through Ch13  
Europe ETSI  
France Restricted Wireless Frequency Bands  
Some areas of France have a restricted frequency band.The worst  
case maximum authorized power indoors are:  
10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz)  
100mW for frequencies between 2446.5 MHz and 2483.5 MHz  
Channels 10 through 13 inclusive operate in the band 2446.6 MHz to  
2483.5 MHz.  
There are few possibilities for outdoor use: On private property or on  
the private property of public persons, use is subject to a preliminary  
authorization procedure by the Ministry of Defense, with maximum  
authorized power of 100mW in the 2446.5–2483.5 MHz band. Use  
outdoors on public property is not permitted.  
In the departments listed below, for the entire 2.4 GHz band:  
Maximum authorized power indoors is 100mW  
Maximum authorized power outdoors is 10mW  
Departments in which the use of the 2400–2483.5 MHz band is  
permitted with an EIRP of less than 100mW indoors and less than  
10mW outdoors:  
01 Ain  
02 Aisne  
03 Allier  
05 Hautes Alpes  
11 Aude  
08 Ardennes 09 Ariège  
12 Aveyron  
25 Doubs  
36 Indre  
16 Charente  
26 Drôme  
24 Dordogne  
32 Gers  
37 Indre et Loire  
50 Manche  
59 Nord  
41 Loir et Cher  
55 Meuse  
45 Loiret  
58 Nièvre  
A-26  
Notebook PC User Manual  
 
60 Oise  
61 Orne  
63 Puy du Dôme  
66 Pyrénées Orientales  
68 Haut Rhin  
71 Saône et Loire  
82 Tarn et Garonne  
88 Vosges  
64 Pyrénées Atlantique  
67 Bas Rhin  
70 Haute Saône  
75 Paris  
84 Vaucluse  
89 Yonne  
90 Territoire de Belfort  
94 Val de Marne  
This requirement is likely to change over time, allowing you to use  
your wireless LAN card in more areas within France. Please check  
with ART for the latest information (www.arcep.fr)  
Your WLAN Card transmits less than 100mW, but more than  
10mW.  
Notebook PC User Manual  
A-27  
UL Safety Notices  
Required for UL 1459 covering telecommunications (telephone)  
equipment intended to be electrically connected to a  
telecommunication network that has an operating voltage to  
ground that does not exceed 200V peak, 300V peak-to-peak, and  
105V rms, and installed or used in accordance with the National  
Electrical Code (NFPA 70).  
When using the Notebook PC modem, basic safety precautions  
should always be followed to reduce the risk of fire, electric shock,  
and injury to persons, including the following:  
DO NOT use the Notebook PC near water, for example, near  
a bath tub, wash bowl, kitchen sink or laundry tub, in a wet  
basement or near a swimming pool.  
DO NOT use the Notebook PC during an electrical storm.There  
may be a remote risk of electric shock from lightning.  
DO NOT use the Notebook PC in the vicinity of a gas leak.  
Required for UL 1642 covering primary (nonrechargeable) and  
secondary (rechargeable) lithium batteries for use as power sources  
in products.These batteries contain metallic lithium, or a lithium  
alloy, or a lithium ion, and may consist of a single electrochemical  
cell or two or more cells connected in series, parallel, or both, that  
convert chemical energy into electrical energy by an irreversible or  
reversible chemical reaction.  
Do not dispose the Notebook PC battery pack in a fire, as  
they may explode. Check with local codes for possible special  
disposal instructions to reduce the risk of injury to persons due  
to fire or explosion.  
Do not use power adapters or batteries from other devices to  
reduce the risk of injury to persons due to fire or explosion. Use  
only UL certified power adapters or batteries supplied by the  
manufacturer or authorized retailers.  
A-28  
Notebook PC User Manual  
 
Power Safety Requirement  
Products with electrical current ratings up to 6A and weighing more  
than 3Kg must use approved power cords greater than or equal to:  
H05VV-F, 3G, 0.75mm2 or H05VV-F, 2G, 0.75mm2.  
TV Tuner Notices (on selected models)  
Note to CATV System Installer—Cable distribution system should be  
grounded (earthed) in accordance with ANSI/NFPA 70, the National  
Electrical Code (NEC), in particular Section 820.93, Grounding of  
Outer Conductive Shield of a Coaxial Cable – installation should  
include bonding the screen of the coaxial cable to the earth at the  
building entrance.  
REACH  
Complying with the REACH (Registration, Evaluation, Authorization,  
and Restriction of Chemicals) regulatory framework, we publish  
the chemical substances in our products at ASUS REACH website at  
http://csr.asus.com/english/REACH.htm.  
Notebook PC User Manual  
A-29  
 
Nordic Lithium Cautions (for lithium-ion batteries)  
CAUTION! Danger of explosion if battery is incorrectly replaced.  
Replace only with the same or equivalent type recommended  
by the manufacturer. Dispose of used batteries according to the  
manufacturer’s instructions. (English)  
ATTENZIONE! Rischio di esplosione della batteria se sostituita in  
modo errato. Sostituire la batteria con un una di tipo uguale o  
equivalente consigliata dalla fabbrica. Non disperdere le batterie  
nell’ambiente. (Italian)  
VORSICHT! Explosionsgefahr bei unsachgemäßen Austausch der  
Batterie. Ersatz nur durch denselben oder einem vom Hersteller  
empfohlenem ähnlichen Typ. Entsorgung gebrauchter Batterien  
nach Angaben des Herstellers. (German)  
ADVARSELI! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering.  
Udskiftning må kun ske med batteri af samme fabrikat og type. Levér  
det brugte batteri tilbage til leverandøren. (Danish)  
VARNING! Explosionsfara vid felaktigt batteribyte. Använd  
samma batterityp eller en ekvivalent typ som rekommenderas  
av apparattillverkaren. Kassera använt batteri enligt fabrikantens  
instruktion. (Swedish)  
VAROITUS! Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda  
paristo ainoastaan laitevalmistajan sousittelemaan tyyppiin. Hävitä  
käytetty paristo valmistagan ohjeiden mukaisesti. (Finnish)  
ATTENTION! Il y a danger d’explosion s’il y a remplacement incorrect  
de la batterie. Remplacer uniquement avec une batterie du mêre  
type ou d’un type équivalent recommandé par le constructeur.  
Mettre au rebut les batteries usagées conformément aux instructions  
du fabricant. (French)  
ADVARSEL! Eksplosjonsfare ved feilaktig skifte av batteri.  
Benytt samme batteritype eller en tilsvarende type anbefalt  
av apparatfabrikanten. Brukte batterier kasseres i henhold til  
fabrikantens instruksjoner. (Norwegian)  
(Japanese)  
ВНИМАНИЕ! При замене аккумулятора на аккумулятор иного  
типа возможно его возгорание. Утилизируйте аккумулятор в  
соответствии с инструкциями производителя. (Russian)  
A-30  
Notebook PC User Manual  
 
Optical Drive Safety Information  
Laser Safety Information  
Internal or external optical drives sold with this Notebook PC  
contains a CLASS 1 LASER PRODUCT. Laser classifications can be  
found in the glossary at the end of this user’s manual.  
WARNING! Making adjustments or performing procedures  
other than those specified in the user’s manual may result in  
hazardous laser exposure. Do not attempt to disassemble the  
optical drive. For your safety, have the optical drive serviced only  
by an authorized service provider.  
Service warning label  
CAUTION! INVISIBLE LASER RADIATION WHEN OPEN. DO  
NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL  
INSTRUMENTS.  
CDRH Regulations  
The Center for Devices and Radiological Health (CDRH) of the  
U.S. Food and Drug Administration implemented regulations  
for laser products on August 2, 1976.These regulations apply to  
laser products manufactured from August 1, 1976. Compliance is  
mandatory for products marketed in the United States.  
WARNING! Use of controls or adjustments or performance of  
procedures other than those specified herein or in the laser  
product installation guide may result in hazardous radiation  
exposure.  
Notebook PC User Manual  
A-31  
 
Macrovision Corporation Product Notice  
This product incorporates copyright protection technology that  
is protected by method claims of certain U.S.A. patents and other  
intellectual property rights owned by Macrovision Corporation and  
other rights owners. Use of this copyright protection technology  
must be authorized by Macrovision Corporation, and is intended  
for home and other limited viewing uses only unless otherwise  
authorized by Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
A-32  
Notebook PC User Manual  
 
CTR 21 Approval  
(for Notebook PC with built-in Modem)  
Danish  
Dutch  
English  
Finnish  
French  
German  
Greek  
Italian  
Portuguese  
Notebook PC User Manual  
A-33  
 
Spanish  
Swedish  
A-34  
Notebook PC User Manual  
European Union Eco-label  
This Notebook PC has been awarded the EU Flower label, which  
means that this product has the following characteristics:  
1. Decreased energy consumption during use and stand-by  
modes.  
2. Limited use of toxic heavy metals.  
3. Limited use of substances harmful to the environment and  
health.  
4. Reduction of the use of natural resources by encouraging  
recycling.  
5. Designed for easy upgrades and longer lifetime through  
providing compatible spare parts such as batteries, power  
supplies, the keyboard, the memory, and if available the CD drive  
or DVD drive.  
6. Reduced solid waste through takeback policy.  
For more information on the EU Flower label, please visit the  
European Union Eco-label website at http://www.ecolabel.eu.  
ENERGY STAR complied product  
ENERGY STAR is a joint program of the U.S.  
Environmental Protection Agency and the U.S.  
Department of Energy helping us all save money  
and protect the environment through energy  
efficient products and practices.  
All ASUS products with the ENERGY STAR logo comply with the  
ENERGY STAR standard, and the power management feature  
is enabled by default. Please visit http://www.energy.gov/  
powermanagement for detail information on power management  
and its benefits to the environment. In addition, please visit http://  
www.energystar.gov for detail information on the ENERGY STAR  
joint program.  
Notebook PC User Manual  
A-35  
 
Global Environmental Regulation Compliance and  
Declaration  
ASUS follows the green design concept to design and manufacture  
our products, and makes sure that each stage of the product  
life cycle of ASUS product is in line with global environmental  
regulations. In addition, ASUS disclose the relevant information  
based on regulation requirements.  
Please refer to http://csr.asus.com/english/Compliance.htm for  
information disclosure based on regulation requirements ASUS is  
complied with:  
Japan JIS-C-0950 Material Declarations  
EU REACH SVHC  
Korea RoHS  
Swiss Energy Laws  
ASUS Recycling/Takeback Services  
ASUS recycling and takeback programs come from our commitment  
to the highest standards for protecting our environment. We believe  
in providing solutions for you to be able to responsibly recycle our  
products, batteries, other components as well as the packaging  
materials. Please go to http://csr.asus.com/english/Takeback.htm for  
detailed recycling information in different regions.  
A-36  
Notebook PC User Manual  
 
Copyright Information  
No part of this manual, including the products and software  
described in it, may be reproduced, transmitted, transcribed, stored  
in a retrieval system, or translated into any language in any form  
or by any means, except documentation kept by the purchaser  
for backup purposes, without the express written permission of  
ASUSTeK COMPUTER INC. (“ASUS”).  
ASUS PROVIDES THIS MANUALAS ISWITHOUT WARRANTY OF ANY  
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO  
THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY  
OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS,  
ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR  
ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES  
(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS,  
LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),  
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL  
OR PRODUCT.  
Products and corporate names appearing in this manual may or  
may not be registered trademarks or copyrights of their respective  
companies, and are used only for identification or explanation and to  
the ownersbenefit, without intent to infringe.  
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL  
ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT  
TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT  
BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO  
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES  
THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS  
AND SOFTWARE DESCRIBED IN IT.  
Copyright © 2011 ASUSTeK COMPUTER INC. All Rights Reserved.  
Notebook PC User Manual  
A-37  
 
Limitation of Liability  
Circumstances may arise where because of a default on ASUSpart  
or other liability, you are entitled to recover damages from ASUS.  
In each such instance, regardless of the basis on which you are  
entitled to claim damages from ASUS, ASUS is liable for no more  
than damages for bodily injury (including death) and damage to real  
property and tangible personal property; or any other actual and  
direct damages resulted from omission or failure of performing legal  
duties under this Warranty Statement, up to the listed contract price  
of each product.  
ASUS will only be responsible for or indemnify you for loss, damages  
or claims based in contract, tort or infringement under this Warranty  
Statement.  
This limit also applies to ASUSsuppliers and its reseller. It is the  
maximum for which ASUS, its suppliers, and your reseller are  
collectively responsible.  
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF  
THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR  
DAMAGES; (2) LOSS OF, OR DAMAGE TO,YOUR RECORDS OR DATA;  
OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY  
ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS  
OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS  
INFORMED OF THEIR POSSIBILITY.  
Service and Support  
Visit our multi-language web site at http://support.asus.com  
A-38  
Notebook PC User Manual  
 
EC Declaration of Conformity  
We, the undersigned,  
Manufacturer:  
ASUSTek COMPUTER INC.  
Address, City:  
No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C.  
Country:  
TAIWAN  
Authorized representative in Europe:  
Address, City:  
ASUS COMPUTER GmbH  
HARKORT STR. 21-23, 40880 RATINGEN  
GERMANY  
Country:  
declare the following apparatus:  
Product name :  
Notebook PC  
Model name :  
U56E, PRO5RE, X5RE  
conform with the essential requirements of the following directives:  
2004/108/EC-EMC Directive  
EN 55022:2006+A1:2007  
EN 61000-3-2:2006+A2:2009  
EN 55013:2001+A1:2003+A2:2006  
EN 55024:1998+A1:2001+A2:2003  
EN 61000-3-3:2008  
EN 55020:2007  
1999/5/EC-R &TTE Directive  
EN 300 328 V1.7.1(2006-10)  
EN 300 440-1 V1.4.1(2008-05)  
EN 300 440-2 V1.2.1(2008-03)  
EN 301 511 V9.0.2(2003-03)  
EN 301 908-1 V3.2.1(2007-05)  
EN 301 908-2 V3.2.1(2007-05)  
EN 301 893 V1.4.1(2005-03)  
EN 302 544-2 V1.1.1(2009-01)  
EN 62311 Jan 2008  
EN 301 489-1 V1.8.1(2008-04)  
EN 301 489-3 V1.4.1(2002-08)  
EN 301 489-4 V1.3.1(2002-08)  
EN 301 489-7 V1.3.1(2005-11)  
EN 301 489-9 V1.4.1(2007-11)  
EN 301 489-17 V2.1.1(2009-05)  
EN 301 489-24 V1.4.1(2007-09)  
EN 302 326-2 V1.2.2(2007-06)  
EN 302 326-3 V1.3.1(2007-09)  
EN 301 357-2 V1.3.1(2006-05)  
EN 302 623 V1.1.1(2009-01)  
EN 62209-2 Jun 2010  
EN 50385:2002  
2006/95/EC-LVD Directive  
EN 60950-1:2006  
EN 60065:2002+A1:2006+A11:2008  
EN 60950-1:2006+A11:2009  
2009/125/EC-ErP Directive  
Regulation (EC) No. 1275/2008  
EN 62301:2005  
Regulation (EC) No. 278/2009  
EN 62301:2005  
Regulation (EC) No. 642/2009  
EN 62301:2005  
Ver. 110101  
CE marking  
(EC conformity marking)  
Position : CEO  
Name :  
Jerry Shen  
Declaration Date: May. 26, 2011  
Year to begin affixing CE marking:2011  
Signature : __________  
Notebook PC User Manual  
A-39  
A-40  
Notebook PC User Manual  

Whynter Air Conditioner Arc 131gd User Manual
Toshiba Air Conditioner Mmy Map1604ht8z E User Manual
Ricoh Aficio Mp 9000 User Manual
Precisionaire Crank Lock Hepa Filter Housing C 4 User Manual
Master Plumber Mp35 User Manual
DELL ULTRASHARP UP2718Q 02 User Manual
DELL SE2222H User Manual
CRAFTSMAN 315.108410 User Manual
BLACK DECKER PI101B User Manual
ASUS RT N600RU User Manual