ASUS X452C 02 User Manual

E8453  
First Edition  
June 2013  
Notebook PC  
E-Manual  
15.6”: X552 Series  
14.0”: X452 Series  
Table of Contents  
About this manual.....................................................................................................7  
Conventions used in this manual ............................................................................. 8  
Icons .................................................................................................................................... 8  
Typography....................................................................................................................... 8  
Safety precautions.....................................................................................................9  
Using your Notebook PC.............................................................................................. 9  
Caring for your Notebook PC ..................................................................................... 10  
Proper disposal................................................................................................................ 11  
Chapter 1: Hardware Setup  
Getting to know your Notebook PC ...................................................................14  
Top View............................................................................................................................. 14  
Bottom................................................................................................................................ 19  
Right Side .......................................................................................................................... 22  
Left Side ............................................................................................................................. 24  
Front Side .......................................................................................................................... 26  
Chapter 2: Using your Notebook PC  
Getting started ...........................................................................................................28  
Install the battery pack.*.............................................................................................. 28  
Charge your Notebook PC........................................................................................... 29  
Lift to open the display panel..................................................................................... 31  
Press the power button................................................................................................ 31  
Gestures for the touchpad .....................................................................................32  
Using the keyboard...................................................................................................39  
Function keys................................................................................................................... 39  
Function keys for ASUS Apps ..................................................................................... 40  
Windows®8 keys ............................................................................................................. 41  
Multimedia control keys* ............................................................................................ 41  
Using the numeric keypad.......................................................................................... 42  
Using the optical drive.............................................................................................43  
Notebook PC E-Manual  
3
Chapter 3: Working with Windows® 8  
Starting for the first time.........................................................................................46  
Windows® 8 lock screen ...........................................................................................46  
Windows® UI ................................................................................................................47  
Start screen....................................................................................................................... 47  
Windows® Apps .............................................................................................................. 47  
Hotspots............................................................................................................................. 48  
Working with Windows® apps...............................................................................51  
Launching apps............................................................................................................... 51  
Customizing apps........................................................................................................... 51  
Closing apps..................................................................................................................... 52  
Accessing the Apps screen.......................................................................................... 53  
Charms bar........................................................................................................................ 55  
Snap feature ..................................................................................................................... 57  
Other keyboard shortcuts ......................................................................................59  
Connecting to wireless networks ........................................................................61  
Wi-Fi..................................................................................................................................... 61  
Bluetooth .......................................................................................................................... 63  
Airplane mode................................................................................................................. 65  
Connecting to wired networks.............................................................................66  
Configuring a dynamic IP/PPPoE network connection .................................... 66  
Configuring a static IP network connection ......................................................... 68  
Turning your Notebook PC off..............................................................................69  
Putting your Notebook PC to sleep ......................................................................... 69  
Chapter 4: ASUS apps  
Featured ASUS Apps.................................................................................................72  
Power4Gear Hybrid........................................................................................................ 72  
Notebook PC E-Manual  
Chapter 5: Power-on Self Test (POST)  
The Power-on Self Test (POST)..............................................................................78  
Using POST to access BIOS and Troubleshoot...................................................... 78  
BIOS ................................................................................................................................78  
Accessing BIOS ................................................................................................................ 78  
BIOS Settings.................................................................................................................... 79  
Troubleshoot...............................................................................................................89  
Refresh your PC ............................................................................................................... 89  
Reset your PC ................................................................................................................... 90  
Advanced options .......................................................................................................... 91  
Chapter 6: Upgrading your Notebook PC  
Installing a Random-access Memory module*...............................................94  
Replacing the Hard Disk Drive* ............................................................................97  
Installing a new battery pack* ..............................................................................103  
Appendices  
DVD-ROM Drive Information*.................................................................................... 108  
Blu-ray ROM Drive Information* ............................................................................... 110  
Internal Modem Compliancy...................................................................................... 110  
Overview............................................................................................................................ 111  
Network Compatibility Declaration......................................................................... 111  
Non-Voice Equipment .................................................................................................. 111  
Federal Communications Commission Interference Statement ................... 113  
FCC Radio Frequency (RF) Exposure Caution Statement................................. 114  
Declaration of Conformity (R&TTE directive 1999/5/EC).................................. 115  
CE Marking........................................................................................................................ 115  
IC Radiation Exposure Statement for Canada ...................................................... 116  
Déclaration d’Industrie Canada relative à l’exposition aux ondes radio ... 117  
Wireless Operation Channel for Different Domains........................................... 118  
Notebook PC E-Manual  
France Restricted Wireless Frequency Bands ....................................................... 118  
UL Safety Notices............................................................................................................ 120  
Power Safety Requirement.......................................................................................... 121  
TV Notices ......................................................................................................................... 121  
REACH................................................................................................................................. 121  
Macrovision Corporation Product Notice.............................................................. 121  
Prevention of Hearing Loss......................................................................................... 121  
Nordic Lithium Cautions (for lithium-ion batteries)........................................... 122  
Optical Drive Safety Information .............................................................................. 123  
CTR 21 Approval (for Notebook PC with built-in Modem) .............................. 124  
ENERGY STAR complied product .............................................................................. 126  
European Union Eco-label........................................................................................... 126  
Global Environmental Regulation Compliance and Declaration .................. 127  
ASUS Recycling/Takeback Services.......................................................................... 127  
Regional notice for Singapore ................................................................................... 127  
Notebook PC E-Manual  
About this manual  
This manual provides information about the hardware and software  
features of your Notebook PC, organized through the following  
chapters:  
Chapter 1: Hardware Setup  
This chapter details the hardware components of your Notebook  
PC.  
Chapter 2: Using your Notebook PC  
This chapter shows you how to use the different parts of your  
Notebook PC.  
Chapter 3: Working with Windows® 8  
This chapter provides an overview of using Windows® 8 in your  
Notebook PC.  
Chapter 4: ASUS Apps  
This chapter features the ASUS apps included with your Notebook  
PC’s Windows® 8 operating system.  
Chapter 5: Power-on Self-test (POST)  
This chapter shows you how to use POST to change the settings  
of your Notebook PC.  
Chapter 6: Upgrading your Notebook PC  
This chapter guides you through the process of replacing and  
upgrading parts of your Notebook PC.  
Appendices  
This section includes notices and safety statements for your  
Notebook PC.  
Notebook PC E-Manual  
Conventions used in this manual  
To highlight key information in this manual, some text are presented as  
follows:  
IMPORTANT! This message contains vital information that must be  
followed to complete a task.  
NOTE: This message contains additional information and tips that can  
help complete tasks.  
WARNING! This message contains important information that must be  
followed to keep you safe while performing tasks and prevent damage to  
your Notebook PC's data and components.  
Icons  
The icons below indicate the devices you can use for completing a  
series of tasks or procedures on your Notebook PC.  
= Use the touchpad.  
= Use the keyboard.  
Typography  
Bold  
= This indicates a menu or an item that must be selected.  
= This indicates sections that you can refer to in this manual.  
Italic  
8
Notebook PC E-Manual  
Safety precautions  
Using your Notebook PC  
This Notebook PC should only be used in  
environments with ambient temperatures between  
ꢂ°C (ꢁ1°F) and 3ꢂ°C (ꢅꢂ°F).  
Refer to the rating label on the bottom of your  
Notebook PC and ensure that your power adapter  
complies with this rating.  
Do not leave your Notebook PC on your lap or near  
any part of your body to prevent discomfort or  
injury from heat exposure.  
Do not use damaged power cords, accessories, and  
other peripherals with your Notebook PC.  
While powered on, ensure that you do not carry or  
cover your Notebook PC with any materials that can  
reduce air circulation.  
Do not place your Notebook PC on uneven or  
unstable work surfaces.  
You can send your Notebook PC through x-ray  
machines (used on items placed on conveyor belts),  
but do not expose them to magnetic detectors and  
wands.  
Contact your airline provider to learn about related  
inflight services that can be used and restrictions  
that must be followed when using your Notebook  
PC in-flight.  
Notebook PC E-Manual  
Caring for your Notebook PC  
Disconnect the AC power and remove the battery  
pack (if applicable) before cleaning your Notebook  
PC. Use a clean cellulose sponge or chamois cloth  
dampened with a solution of nonabrasive detergent  
and a few drops of warm water. Remove any extra  
moisture from your Notebook PC using a dry cloth.  
Do not use strong solvents such as thinners,  
benzene, or other chemicals on or near your  
Notebook PC.  
Do not place objects on top of your Notebook PC.  
Do not expose your Notebook PC to strong  
magnetic or electrical fields.  
Do not use or expose your Notebook PC near  
liquids, rain, or moisture.  
Do not expose your Notebook PC to dusty  
environments.  
Do not use your Notebook PC near gas leaks.  
10  
Notebook PC E-Manual  
Proper disposal  
Do not throw your Notebook PC in municipal waste.  
This product has been designed to enable proper  
reuse of parts and recycling. The symbol of the  
crossed out wheeled bin indicates that the product  
(electrical, electronic equipment and mercury-  
containing button cell battery) should not be  
placed in municipal waste. Check local regulations  
for disposal of electronic products.  
Do not throw the battery in municipal waste. The  
symbol of the crossed out wheeled bin indicates  
that the battery should not be placed in municipal  
waste.  
Notebook PC E-Manual  
11  
1ꢀ  
Notebook PC E-Manual  
Chapter 1:  
Hardware Setup  
Notebook PC E-Manual  
13  
Getting to know your Notebook PC  
Top View  
NOTE: The keyboard's layout may vary per region or country. The top  
view may also vary in appearance depending on the Notebook PC model.  
15” model  
1ꢁ  
Notebook PC E-Manual  
Microphone  
The built-in microphone can be used for video conferencing,  
voice narrations, or simple audio recording.  
Camera  
The built-in camera allows you to take pictures or record videos  
using your Notebook PC.  
Camera indicator  
The camera indicator lights up when the built-in camera is in  
use.  
Microphone*  
The built-in microphone can be used for video conferencing,  
voice narrations, or simple audio recording.  
Display panel  
This high-definition display panel provides excellent viewing  
features for photos, videos, and other multimedia files on your  
Notebook PC.  
Power button  
Press the power button to turn your Notebook PC on or off. You  
can also use the power button to put your Notebook PC to sleep  
or hibernate mode and wake it up from sleep or hibernate mode.  
In the event that your Notebook PC becomes unresponsive,  
press and hold the power button for about four (ꢁ) seconds until  
your Notebook PC shuts down.  
* on selected models only  
Notebook PC E-Manual  
1ꢂ  
Numeric keypad*  
The numeric keypad toggles between these two functions: for  
numeric input and as pointer direction keys.  
NOTE: For more details, refer to the Using the numeric keypad  
section in this manual.  
Keyboard  
The keyboard provides full-sized QWERTY keys with a  
comfortable travel depth for typing. It also enables you to use  
the function keys, allows quick access to Windows®, and controls  
other multimedia functions.  
NOTE: The keyboard layout differs by model or territory.  
Touchpad  
The touchpad allows the use of multi-gestures to navigate  
onscreen, providing an intuitive user experience. It also simulates  
the functions of a regular mouse.  
NOTE: For more details, refer to the Gestures for the touchpad  
section in this manual.  
* on selected models only  
1ꢃ  
Notebook PC E-Manual  
Status indicators  
The status indicators help identify the current hardware status of  
your Notebook PC.  
Power indicator  
The power indicator lights up when the Notebook PC  
is turned on and blinks slowly when the Notebook  
PC is in sleep mode.  
Two-color battery charge indicator  
The two-color LED provides a visual indication of the  
battery’s charge status. Refer to the following table  
for details:  
Color  
Status  
Solid Green  
The Notebook PC is plugged to  
a power source and the battery  
power is between ꢅꢂ% and  
100%.  
Solid Orange  
The Notebook PC is plugged  
to a power source, charging its  
battery, and the battery power  
is less than ꢅꢂ%.  
Blinking Orange  
Lights off  
The Notebook PC is running on  
battery mode and the battery  
power is less than 10%.  
The Notebook PC is running on  
battery mode and the battery  
power is between 10% to 100%.  
Notebook PC E-Manual  
1ꢄ  
Drive activity indicator  
This indicator lights up when your Notebook PC is  
accessing the internal storage drives.  
Bluetooth / Wireless indicator  
This indicator lights up when your Notebook PC’s  
wireless function (Bluetooth or Wi-Fi) is enabled.  
Number lock indicator*  
This indicator lights up when the number lock  
function is activated. This allows you to use some of  
the keys on your keyboard for numeric input.  
Capital lock indicator  
This indicator lights up when the capital lock  
function is activated. Using capital lock allows you  
to type capitalized letters (such as A, B, C) using your  
Notebook PC’s keyboard.  
* on selected models only  
18  
Notebook PC E-Manual  
Bottom  
NOTE: The bottom side may vary in appearance depending on model.  
WARNING! The bottom of the Notebook PC can get warm to hot while in  
use or while charging the battery pack. When working on your Notebook  
PC, do not place it on surfaces that can block the vents.  
IMPORTANT! Battery time varies by usage and by the specifications for  
this Notebook PC. The battery pack cannot be disassembled.  
Notebook PC E-Manual  
1ꢅ  
Battery pack  
The battery pack is automatically charged when your Notebook  
PC is connected to a power source. When charged, the battery  
pack supplies power to your Notebook PC.  
Spring battery lock*  
The spring battery lock automatically locks the battery pack in  
place once it is inserted into the battery slot.  
IMPORTANT! This lock should be held in an unlocked position  
when removing the battery pack.  
Manual battery lock*  
The manual battery lock is used to keep the battery pack  
secured. This lock should be manually moved to a locked or  
unlocked position to insert or remove the battery pack.  
* on selected models only  
ꢀ0  
Notebook PC E-Manual  
Air vents  
The air vents allow cool air to enter and warm air to exit the  
Notebook PC.  
WARNING! Ensure that paper, books, clothing, cables, or other  
objects do not block any of the air vents or else overheating may  
occur.  
Hard disk drive compartment*  
This compartment is a reserved space for the HDD (hard disk  
drive) of your Notebook PC.  
Random-access memory module compartment*  
This compartment allows you to add RAM (random-access  
memory) modules to increase the memory capacity of your  
Notebook PC.  
* on selected models only  
Notebook PC E-Manual  
ꢀ1  
Right Side  
15” and 14" model  
USB 2.0 port*  
This USB (Universal Serial Bus) port is compatible with USB ꢀ.0  
or USB 1.1 devices such as keyboards, pointing devices, flash  
disk drives, external HDDs, speakers, cameras and printers.  
Optical drive  
Your Notebook PC’s optical drive may support several disc  
formats such as CDs, DVDs, recordable discs, or rewritable discs.  
Optical disc drive eject button  
Press this button to eject the optical drive tray.  
* on selected models only  
ꢀꢀ  
Notebook PC E-Manual  
Optical disc drive manual eject hole  
The manual eject hole is used to eject the drive tray in case the  
electronic eject button does not work.  
WARNING! Use the manual eject hole only when the electronic  
eject button does not work.  
NOTE: For more details, refer to the Using the optical drive  
section in this manual.  
Kensington® security slot  
The Kensington® security slot allows you to secure your  
Notebook PC using Kensington® compatible Notebook PC  
security products.  
Notebook PC E-Manual  
ꢀ3  
Left Side  
15” and 14" model  
Power (DC) input port  
Insert the bundled power adapter into this port to charge the  
battery pack and supply power to your Notebook PC.  
WARNING! The adapter may become warm to hot while in use.  
Do not cover the adapter and keep it away from your body while  
it is connected to a power source.  
IMPORTANT! Use only the bundled power adapter to charge  
the battery pack and supply power to your Notebook PC.  
Air vents  
The air vents allow cool air to enter and warm air to exit the  
Notebook PC.  
WARNING! Ensure that paper, books, clothing, cables, or other  
objects do not block any of the air vents or else overheating may  
occur.  
VGA port  
This port allows you to connect your Notebook PC to an  
external display.  
ꢀꢁ  
Notebook PC E-Manual  
HDMI port  
This port is for the HDMI (High-Definition Multimedia Interface)  
connector and is HDCP compliant for HD DVD, Blu-ray, and  
other protected content playback.  
LAN port  
Insert the network cable into this port to connect to a local area  
network.  
USB 3.0 ports  
These USB (Universal Serial Bus) 3.0 ports provide a transfer rate  
of up to ꢂ Gbit/s and are backward compatible to USB ꢀ.0.  
Headphone output/microphone input combo jack port  
This port allows you to connect your Notebook PC to amplified  
speakers or headphones. You can also use this port to connect  
your Notebook PC to an external microphone.  
Notebook PC E-Manual  
ꢀꢂ  
Front Side  
NOTE: The front side may vary in appearance depending on model.  
Status indicators  
The status indicators help identify the current hardware status  
of your Notebook PC.  
Memory card reader  
This built-in memory card reader supports SD and SDHC card  
formats.  
ꢀꢃ  
Notebook PC E-Manual  
Chapter 2:  
Using your Notebook PC  
Notebook PC E-Manual  
ꢀꢄ  
Getting started  
NOTE: If your Notebook PC does not have its battery pack installed, use  
the following procedures for installation.  
Install the battery pack.*  
A.  
B.  
Move the manual battery lock to the unlocked position.  
Align and insert the battery pack into the Notebook PC’s battery  
slot.  
C.  
Move the manual battery lock back to the locked position after  
inserting the battery pack.  
* on selected models only  
ꢀ8  
Notebook PC E-Manual  
Charge your Notebook PC.  
A.  
B.  
C.  
Connect the AC power cord to the AC/DC adapter.  
Plug the AC power adapter into a 100V~ꢀꢁ0V power source.  
Connect the DC power connector into your Notebook PC’s power  
(DC) input.  
Charge the Notebook PC for 3 hours before using it in  
battery mode for the first time.  
NOTE: The power adapter may vary in appearance, depending on models  
and your region.  
NOTE:  
Power adapter information:  
Input voltage: 100-ꢀꢁ0Vac  
Input frequency: ꢂ0-ꢃ0Hz  
Rating output current: 3.ꢁꢀA (ꢃꢂW), ꢁ.ꢄꢁA (ꢅ0W)  
Rating output voltage: 1ꢅV  
Notebook PC E-Manual  
ꢀꢅ  
IMPORTANT!  
Ensure that your Notebook PC is connected to a grounded  
power adapter before turning it on for the first time.  
When using your Notebook PC on power adapter mode, the  
socket outlet must be near to the unit and easily accessible.  
Locate the input/output rating label on your Notebook  
PC and ensure that it matches the input/output rating  
information on your power adapter. Some Notebook PC  
models may have multiple rating output currents based on  
the available SKU.  
WARNING!  
Read the following precautions for your Notebook PC’s battery.  
Only ASUS-authorized technicians should remove the battery  
inside the device.  
The battery used in this device may present a risk of fire or  
chemical burn if removed or disassembled.  
Follow the warning labels for your personal safety.  
Risk of explosion if battery is replaced by an incorrect type.  
Do not dispose of in fire.  
Never attempt to short-circuit your Notebook PC’s battery.  
Never attempt to dissamble and reassemble the battery.  
Discontinue usage if leakage is found.  
The battery and its components must be recycled or disposed  
of properly.  
Keep the battery and other small components away from  
children.  
30  
Notebook PC E-Manual  
Lift to open the display panel.  
Press the power button.  
Notebook PC E-Manual  
31  
Gestures for the touchpad  
Gestures allow you to launch programs and access the settings of your  
Notebook PC. Refer to the following illustrations when using hand  
gestures on your touchpad.  
Moving the pointer  
You can click or click anywhere on the touchpad to activate its pointer,  
then slide your finger on the touchpad to move the pointer onscreen.  
Slide horizontally  
Slide vertically  
Slide diagonally  
3ꢀ  
Notebook PC E-Manual  
One-finger gestures  
Click/Double click  
In the Start screen, click an app to launch it.  
In Desktop mode, double-click an application to launch it.  
Drag and drop  
Double-click an item, then slide the same finger without lifting it off  
the touchpad. To drop the item to its new location, lift your finger from  
the touchpad.  
Notebook PC E-Manual  
33  
Left-click  
Right-click  
In the Start screen, click an  
app to launch it.  
In the Start screen, click an  
app to select it and launch  
the settings bar. You can also  
press this button to launch  
the All Apps bar.  
In Desktop mode, double-  
click an application to  
launch it.  
In Desktop mode, use this  
button to open the right-  
click menu.  
NOTE: The areas inside the dotted line represent the locations of the left  
mouse button and the right mouse button on the touchpad.  
3ꢁ  
Notebook PC E-Manual  
Top edge swipe  
In the Start screen, swipe from the top edge to launch the All  
Apps bar.  
In a running app, swipe from the top edge to view its menu.  
Left edge swipe  
Right edge swipe  
Swipe from the left edge to shuffle Swipe the right edge to launch  
your running apps. the Charms bar.  
Notebook PC E-Manual  
3ꢂ  
Two-finger gestures  
Click  
Rotate  
Click two fingers on the touchpad To rotate an image, place two  
to simulate the right-click  
function.  
fingers on the touchpad then  
turn one finger clockwise or  
counterclockwise while the other  
stays still.  
Two-finger scroll (up/down)  
Two-finger scroll (left/right)  
Slide two fingers to scroll up or  
down.  
Slide two fingers to scroll left or  
right.  
3ꢃ  
Notebook PC E-Manual  
Zoom out  
Zoom in  
Bring together your two fingers on Spread apart your two fingers on  
the touchpad.  
the touchpad.  
Drag and drop  
Select an item then press and hold the left button. Using your other  
finger, slide down the touchpad to drag and drop the item to a new  
location.  
Notebook PC E-Manual  
3ꢄ  
Three-finger gestures  
Swipe up  
Swipe down  
Swipe three fingers upward to  
show all running applications.  
Swipe three fingers downward to  
show the Desktop mode.  
38  
Notebook PC E-Manual  
Using the keyboard  
Function keys  
The function keys on your Notebook PC’s keyboard can trigger the  
following commands:  
Puts the Notebook PC into Sleep mode  
Turns Airplane mode on or off  
NOTE: When enabled, the Airplane mode disables all  
wireless connectivity.  
Decreases display brightness  
Increases display brightness  
Turns the display panel off  
Activates the second screen  
NOTE: Ensure that the second display is connected to  
your Notebook PC.  
Enables or disables the touchpad  
Turns the speaker on or off  
Notebook PC E-Manual  
3ꢅ  
Turns the speaker volume down  
Turns the speaker volume up  
Function keys for ASUS Apps  
Your Notebook PC also comes with a special set of function keys that  
can be used to launch ASUS apps.  
Toggles the ASUS Splendid Video Enhancement  
Technology app to switch between these display  
color enhancement modes: Gamma Correction, Vivid  
Mode, Theater Mode, Soft Mode, My Profile, and  
Normal.  
Launches the ASUS PowerꢁGear Hybrid app  
ꢁ0  
Notebook PC E-Manual  
Windows®8 keys  
There are two special Windows® keys on your Notebook PC’s keyboard  
used as below:  
Press this key to go back to the Start screen. If you are  
already in the Start screen, press this key to go back to  
the last app you opened.  
Press this key to simulate the right-click functions.  
Multimedia control keys*  
The multimedia control keys allow you to control multimedia files, such  
as audios and videos, when played in your Notebook PC.  
Press  
in combination with the arrow keys on your Notebook PC,  
illustrated as below.  
Stop  
Skip to  
previous  
track or  
rewind  
Skip to  
Play or  
pause  
next track  
or fast  
forward  
* on selected models only  
Notebook PC E-Manual  
ꢁ1  
Using the numeric keypad  
A numeric keypad is available on  
selected Notebook PC models. You  
can use this keypad for numeric  
input or as pointer direction keys.  
Press  
to  
toggle between using  
the keypad as number  
keys or as pointer  
direction keys.  
ꢁꢀ  
Notebook PC E-Manual  
Using the optical drive  
NOTE: The actual location of the electronic eject button may vary  
depending on your Notebook PC model.  
Inserting an optical disc  
1.  
While the Notebook PC is  
on, press the electronic eject  
button to partially eject the  
optical drive tray.  
ꢀ.  
Gently pull out the drive tray.  
IMPORTANT! Be careful not  
to touch the optical drive lens.  
Ensure that there are no objects  
that may get jammed under the  
drive tray.  
3.  
Hold the disc by the edge,  
with its printed side up, then  
gently place it inside the hub.  
Notebook PC E-Manual  
ꢁ3  
ꢁ.  
Push down the disc’s plastic  
hub until it snaps onto the  
optical drive hub.  
ꢂ.  
Push the drive tray gently to  
close the optical drive.  
NOTE: While data is being  
read, it is normal to hear some  
spinning and vibrating in the  
optical drive.  
Manual eject hole  
The manual eject hole is located on the optical drive door and is used to  
eject the optical drive tray in case the electronic eject button does not  
work.  
To manually eject the optical drive tray, insert a straightened paper clip  
into the manual eject hole until the drive tray opens.  
WARNING! Use the manual eject hole only when the electronic eject  
button does not work.  
ꢁꢁ  
Notebook PC E-Manual  
Chapter 3:  
Working with Windows® 8  
Notebook PC E-Manual  
ꢁꢂ  
Starting for the first time  
When you start your computer for the first time, a series of screens  
appear to guide you in configuring the basic settings of your Windows®  
8 operating system.  
To start your Notebook PC for the first time:  
1.  
ꢀ.  
3.  
ꢁ.  
Press the power button on your Notebook PC. Wait for a few  
minutes until the setup screen appears.  
From the setup screen, pick a language to use on your Notebook  
PC.  
Carefully read the License Terms. Tick I accept the terms for  
using Windows then click Accept.  
Follow the onscreen instructions to configure the following basic  
items:  
Keep your PC secure  
Personalize  
Wireless  
Settings  
Sign in to your PC  
ꢂ.  
After configuring the basic items, the Windows®8 tutorial appears.  
Watch this to learn more about Windows®8 functionalities.  
Windows® 8 lock screen  
The Windows®8 lock screen may appear when your Notebook PC enters  
the Windows®8 operating system. To proceed, click on the lock screen  
or press any key on your Notebook PC's keyboard.  
ꢁꢃ  
Notebook PC E-Manual  
Windows® UI  
Windows® 8 comes with a tile-based user interface (UI) which allows  
you to organize and easily access Windows® apps from the Start screen.  
It also includes the following features that you can use while working  
on your Notebook PC.  
Start screen  
The Start screen appears after successfully signing in to your user  
account. It helps organize all the applications you need in just one  
place.  
Zoom in/out button  
Windows® Apps  
These are apps pinned on the Start screen and displayed on tiled-format  
for easy access.  
NOTE: Some apps require signing in to your Microsoft account before  
they are fully launched.  
Notebook PC E-Manual  
ꢁꢄ  
Hotspots  
Onscreen hotspots allow you to launch programs and access the  
settings of your Notebook PC. The functions in these hotspots can be  
activated using the touchpad.  
Hotspots on a running app  
Hotspots on the Start screen  
ꢁ8  
Notebook PC E-Manual  
Hotspot  
Action  
upper left corner  
Hover your mouse pointer on the upper  
left corner then click on the recent app’s  
thumbnail to revert back to that running app.  
If you launched more than one app, slide  
down to show all running apps.  
lower left corner  
From a running app screen:  
Hover your mouse pointer on the lower  
left corner then click on the Start screen’s  
thumbnail to go back to the Start screen.  
NOTE: You can also press the Windows key  
on your keyboard to go back to the  
Start screen.  
From the Start screen:  
Hover your mouse pointer on the lower  
left corner then click on the running app’s  
thumbnail to go back to that app.  
Notebook PC E-Manual  
ꢁꢅ  
Hotspot  
top side  
Action  
Hover your mouse pointer on the top side  
until it changes to a hand icon. Drag then  
drop the app to a new location.  
NOTE: This hotspot function only works on  
a running app or when you want to use the  
Snap feature. For more details, refer to the  
Snap feature under Working with Windows®  
apps.  
upper or lower right Hover your mouse pointer on the upper or  
corner  
lower right corner to launch the Charms bar.  
ꢂ0  
Notebook PC E-Manual  
Working with Windows® apps  
Use your Notebook PC’s touchpad, or keyboard to launch, customize,  
and close apps.  
Launching apps  
Position your mouse pointer over the app then left-click  
or click once to launch it.  
Press  
twice then use the arrow keys to browse  
to launch an app.  
gh pps
Customizing apps  
You can move, resize, uclose apps from the Start screen using  
the following steps:  
Moving apps  
Double-click on the app then drag and drop the app to  
a new lo
Resizing apps  
Right-click on the app to activate its settings bar then  
click or  
or  
.
Notebook PC E-Manual  
ꢂ1  
Unpinning apps  
Right-click on the app to activate the settings bar then  
click  
.
Closing apps  
1.  
Move your mouse pointer on the top side of the  
launched app then wait for the pointer to change  
to a hand icon.  
ꢀ.  
Drag then drop the app to the bottom of the  
screen to close it.  
From the running app’s screen, press  
.
ꢂꢀ  
Notebook PC E-Manual  
Accessing the Apps screen  
Aside from the apps already pinned on your Start screen, you can also  
open other applications through the Apps screen.  
Horizontal scroll bar  
Launching the Apps scre
Launch the Apps screen using your Notebook PC's touchpad or  
keyboard.  
Swipe from the top edge to launch the All Apps bar.  
From the Start screen, press  
All Apps icon then press  
to select the  
.
Notebook PC E-Manual  
ꢂ3  
Pinning more apps on the Start screen  
You can pin more apps on the Starusing your touchpad.  
1.  
Position the mouse pointer over the app you  
want to pin art screen.  
ꢀ.  
3.  
Right-click on the app to activate its settings.  
Click on the  
icon.  
ꢂꢁ  
Notebook PC E-Manual  
Charms bar  
The Charms bar is a toolbar that can be triggered on the right side  
of your screen. It consists of several tools that allow you to share  
applications and provide quick access for customizing the settings of  
your Notebook PC.  
Charms bar  
Launching the charms bar  
NOTE: When called out, the charms bar initially appears as a set of  
white icons. The image above shows how the charms bar looks like once  
activated.  
Use your Notebook PC’s touchpad or keyboard to launch the charms  
bar.  
Move your mouse pointer on the upper or lower right  
corner of the screen.  
Press  
Notebook PC E-Manual  
ꢂꢂ  
Inside the charms bar  
Search  
This charm allows you to look for files, applications, or  
programs in your Notebook PC.  
Share  
This charm allows you to share applications via social  
networking sites or email.  
Start  
This charm reverts the display back to the Start screen.  
From the Start screen, you can also use this to revert back  
to a recently opened app.  
Devices  
This charm allows you to access and share files with  
the devices attached to your Notebook PC such as an  
external display or printer.  
Settings  
This charm allows you to access the PC settings of your  
Notebook PC.  
ꢂꢃ  
Notebook PC E-Manual  
Snap feature  
The Snap feature displays two apps side-by-side, allowing you to work  
or switch between apps.  
IMPORTANT! Ensure that your Notebook PC’s screen resolution is set to  
13ꢃꢃ x ꢄꢃ8 pixels or higher before using the Snap feature.  
Snap bar  
Notebook PC E-Manual  
ꢂꢄ  
Using Snap  
Use your Notebook PC’s touchpad or keyboard to activate and use Snap.  
1.  
ꢀ.  
Launch the app you wish to snap.  
Hover the mouse point on the top side of your  
screen.  
3.  
ꢁ.  
Once the pointer changes to a hand icon, drag  
then drop the app to the left or right side of the  
display panel.  
Launch another app.  
1.  
ꢀ.  
3.  
ꢁ.  
Launch the app you wish to snap.  
Press  
.
Launch another app.  
To switch between apps, press  
.
ꢂ8  
Notebook PC E-Manual  
Other keyboard shortcuts  
Using the keyboard, you can also use the following shortcuts to help  
you launch applications and navigate Windows®8.  
Switches between the Start screen and the last  
running app  
\
Launches the desktop  
Launches the Computer window on Desktop  
mode  
Opens the File charm  
Opens the Share charm  
Opens the Settings charm  
Opens the Devices charm  
Activates the Lock screen  
Minimizes the Internet Explorer window  
Notebook PC E-Manual  
ꢂꢅ  
Opens the Second screen pane  
Opens the Apps search pane  
Opens the Run window  
Opens Ease of Access Center  
Opens the Settings charm  
Opens a menu box of Windows® tools  
Launches the magnifier icon and zooms in  
your screen  
Zooms out your screen  
Opens the Narrator Settings  
ꢃ0  
Notebook PC E-Manual  
Connecting to wireless networks  
Wi-Fi  
Access emails, surf the Internet, and share applications via social  
networking sites using your k PC’s Wi-Fi connection.  
IMPORTANT! The Airpladisables this feature. Ensure that  
Airplane mode is turned e enabling the Wi-Fi connection of your  
Notebook PC.  
Enabling Wi-Fi  
Activate Wi-Fi in your Notebook PC using the following steps on your  
touchpad.  
1.  
ꢀ.  
3.  
Launch the Charms bar.  
ck  
and click  
.
Select an access point from the list of available Wi-Fi connections.  
Notebook PC E-Manual  
ꢃ1  
ꢁ.  
ꢂ.  
Click Connect to start the network connection.  
NOTE: You may be prompted to enter a security key to activate the Wi-Fi  
connection.  
If you want to enable sharing between your Notebook PC and  
other wireless-enabled systems, click Yes, turn on sharing and  
connect to devices. Click No, don't turn on sharing or connect  
to devices if you do not want to enable the sharing function.  
ꢃꢀ  
Notebook PC E-Manual  
Bluetooth  
Use Bluetooth to facilitate wireless data transfers with other Bluetooth-  
enabled devices.  
IMPORTANT! The Airplane mode disables this feature. Ensure that  
Airplane mode is turned off before enabling the Bluetooth connection of  
your Notebook PC.  
Pairing with other Bluetooth-enabled devices  
You need to pair your Notebook PC with other Bluetooth-enabled  
devices to enable data transfers. To do this, use your touchpad as  
follows:  
1.  
ꢀ.  
3.  
Launch the Charms bar.  
ck  
then click Change PC Settings.  
Under PC Settings, select Devices then click Add a Device to  
search for Bluetooth-enabled devices.  
Notebook PC E-Manual  
ꢃ3  
ꢁ.  
Select a device from the list. Compare the passcode on your  
Notebook PC with the passcode sent to your chosen device. If  
they are the same, click Yes to successfully pair your Notebook PC  
with the device.  
NOTE: For some bluetooth-enabled devices, you may be prompted to  
key in the passcode of your Notebook PC.  
ꢃꢁ  
Notebook PC E-Manual  
Airplane mode  
The Airplane mode disables wireless communication, allowing you to  
use your Notebook PC safely while in-flight.  
Turning Airplane mode on  
1.  
ꢀ.  
3.  
Launch the Charms bar.  
ck  
and click  
Move the slider to the urn the Airplane  
mode on.  
Press  
.
Turning Airplane mode off  
1.  
ꢀ.  
3.  
Launch the Charms bar.  
ck  
and click  
.
Move the slider to the left to turn the Airplane  
mode off.  
Press  
.
NOTE: Contact your airline provider to learn about related inflight services  
that can be used and restrictions that must be followed when using your  
Notebook PC in-flight.  
Noteboonual  
ꢃꢂ  
Connecting to wired networks  
You can also connect to wired networks, such as local area networks  
and broadband Internet connection, using your Notebook PC’s LAN  
port.  
NOTE: Contact your Internet Service Provider (ISP) for details or  
your network administrator for assistance in setting up your Internet  
connection.  
To configure your settings, refer to the following procedures.  
IMPORTANT! Ensure that a network cable is connected between your  
Notebook PC’s LAN port and a local area network before performing the  
following actions.  
Configuring a dynamic IP/PPPoE network  
connection  
1.  
ꢀ.  
Launch Desktop.  
From the Windows® taskbar, right-click the network  
icon  
then click Open Network and Sharing  
Center.  
3.  
ꢁ.  
In the Network and Sharing Center window, click  
Change adapter settings.  
Right-click on your LAN then select Properties.  
ꢃꢃ  
Notebook PC E-Manual  
ꢂ.  
ꢃ.  
Click Internet Protocol Version 4(TCP/IPv4) then  
click Properties.  
Click Obtain an IP address automatically then  
click OK.  
NOTE: Proceed to the next steps if you are using PPPoE connection.  
ꢄ.  
Return to the Network and Sharing Center  
window then click Set up a new connection or  
network.  
8.  
ꢅ.  
Select Connect to the Internet then click Next.  
Click Broadband (PPPoE).  
10. Type your User name, Password, and Connection  
name then click Connect.  
11. Click Close to finish the configuration.  
1ꢀ. Click  
on the taskbar then click the  
connection you just created.  
13. Type your user name and password then click  
Connect to start connecting to the Internet.  
Notebook PC E-Manual  
ꢃꢄ  
Configuring a static IP network connection  
1.  
Repeat steps 1 to ꢂ under Configuring a dynamic  
IP/PPPoE network connection.  
Click Use the following IP address.  
3.  
Type the IP address, Subnet mask and Default  
gateway from your service provider.  
ꢁ.  
If needed, you can also type the preferred DNS  
server address and alternate DNS server address  
then click OK.  
ꢃ8  
Notebook PC E-Manual  
Turning your Notebook PC off  
You can turn off your NPC by doing either of the following  
procedures:  
ck  
from the Charms bar then click  
> Shut down to do l shutdown.  
From the log-in screen, click  
> Shut  
down.  
You can also shut down your Notebook PC using  
Desktop mode. To do this, launch the desktop  
then press alt + f4 to launch the Shut Down  
window. Select Shut Down from the drop-down  
list then select OK.  
If your Notebook PC is unresponsive, press  
and hold the power button for at least four (ꢁ)  
seconds until your Notebook PC turns off.  
Puttinr Notebook PC to sleep  
To put your Notebook PC on Sleep mode, press the power button once.  
You can also put your Notebook PC to sleep mode using  
Desktop mode. To do this, launch the desktop then press  
alt + f4 to launch the Shut Down window. Select Sleep  
from the drop-down list then select OK.  
Noteboonual  
ꢃꢅ  
ꢄ0  
Notebook PC E-Manual  
Chapter 4:  
ASUS apps  
Notebook PC E-Manual  
ꢄ1  
Featured ASUS Apps  
Power4Gear Hybrid  
Optimize the performance of your Notebook PC using the power saving  
modes in PowerꢁGear.  
NOTE: Unplugging the Notebook PC from its power adapter automatically  
switches PowerꢁGear Hybrid to Battery Saving mode.  
Launching Power4Gear Hybrid  
Press  
.
ꢄꢀ  
Notebook PC E-Manual  
Running System  
This option allows you to enable either of the following power saving  
modes in your Notebook PC.  
NOTE: By default, your Notebook PC is set to Performance mode.  
Performance mode  
Use this mode when doing high-performance activities like playing  
games or conducting business presentations using your Notebook PC.  
Battery Saving mode  
This mode extends your Notebook PC’s battery life while plugged in to  
the power adapter or while running on battery power only.  
Select from these power saving modes.  
This option allows you to hide  
the desktop icons and turns the  
presentation mode on or off.  
Use these options to customize your  
power saving mode.  
Notebook PC E-Manual  
ꢄ3  
System in Sleep  
This option allows you to enable or disable either of the following sleep  
modes:  
Instant On  
This mode is default-enabled in your Notebook PC. It allows the system  
to return to its last working state even after your Notebook PC has  
entered into sleep mode.  
Move this slider to switch between  
Instant On or Long Standby Time.  
ꢄꢁ  
Notebook PC E-Manual  
Long Standby Time  
This mode allows you to extend your Notebook PC’s battery life. When  
enabled, the Notebook PC returns to its last working state in as fast as  
seven seconds, four hours after entering into deep sleep mode.  
Notebook PC E-Manual  
ꢄꢂ  
ꢄꢃ  
Notebook PC E-Manual  
Chapter 5:  
Power-on Self Test (POST)  
Notebook PC E-Manual  
ꢄꢄ  
The Power-on Self Test (POST)  
The Power-on Self Test (POST) is a series of software-controlled  
diagnostic tests that run when you turn on or restart your Notebook PC.  
The software that controls the POST is installed as a permanent part of  
the Notebook PC’s architecture.  
Using POST to access BIOS and Troubleshoot  
During POST, you can access the BIOS settings or run troubleshooting  
options using the function keys of your Notebook PC. You may refer to  
the following information for more details.  
BIOS  
The Basic Input and Output System (BIOS) stores system hardware  
settings that are needed for system startup in the Notebook PC.  
The default BIOS settings apply to most conditions of your Notebook  
PC. Do not change the default BIOS settings except in the following  
circumstances:  
An error message appears onscreen during system bootup and  
requests you to run the BIOS Setup.  
You have installed a new system component that requires further  
BIOS settings or updates.  
WARNING: Using inappropriate BIOS settings may result to system  
instability or boot failure. We strongly recommend that you change the  
BIOS settings only with the help of a trained service personnel.  
Accessing BIOS  
Restart your Notebook PC then press  
during POST.  
ꢄ8  
Notebook PC E-Manual  
BIOS Settings  
NOTE: The BIOS screens in this section are for reference only. The actual  
screens may differ by model and territory.  
Boot  
This menu allows you to set your boot option priorities. You may refer to  
the following procedures when setting your boot priority.  
1.  
On the Boot screen, select Boot Option #1.  
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.  
Main  
Advanced Boot  
Security  
Save & Exit  
Sets the system  
boot order  
Boot Configuration  
Fast Boot  
[Enabled]  
Launch CSM  
[Disabled]  
Driver Option Priorities  
Boot Option Priorities  
Boot Option #1  
: Select Screen  
: Select Item  
→←  
↑↓  
[Windows Boot Manager]  
Enter: Select  
+/— : Change Opt.  
F1  
F9  
: General Help  
: Optimized Defaults  
Add New Boot Option  
Delete Boot Option  
F10 : Save & Exit  
ESC : Exit  
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.  
Notebook PC E-Manual  
ꢄꢅ  
ꢀ.  
Press  
and select a device as the Boot Option #1.  
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.  
Main  
Advanced Boot  
Security  
Save & Exit  
Boot Configuration  
Fast Boot  
Sets the system  
boot order  
[Enabled]  
Launch CSM  
[Disabled]  
Driver Option Priorities  
Boot Option #1  
Boot Option Prioritie
Boot Option #1  
: Select Screen  
: Select Item  
→←  
↓  
Windows Boot Manager  
ter: Select  
— : Change Opt.  
Disabled  
F9  
: General Help  
: Optimized Defaults  
Add New Boot Option  
Delete Boot Option  
F10 : Save & Exit  
ESC : Exit  
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.  
80  
Notebook PC E-Manual  
Security  
This menu allows you to set up the administrator and user password  
of your Notebook PC. It also allows you to control the access to your  
Notebook PC’s hard disk drive, input/output (I/O) interface, and USB  
interface.  
NOTE:  
If you install a User Password, you will be prompted to input  
this before entering your Notebook PC's operating system.  
If you install an Administrator Password, you will be  
prompted to input this before entering BIOS.  
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.  
Advanced Boot Security Save & Exit  
Main  
Set Administrator  
Password. The  
password length  
must be in the  
following range:  
Password Description  
If ONLY the Administrator’s password is set,  
then this only limits access to Setup and is  
only asked for when entering Setup. If ONLY  
the user’s password is set, then this is a  
power on password and must be entered to boot  
or enter Setup. In Setup, the User will have  
Administrator rights.  
Minimum length 3  
Maximum length 20  
Administrator Password Status  
User Password Status  
NOT INSTALLED  
NOT INSTALLED  
Administrator Password  
User Password  
HDD Password Status :  
Set Master Password  
Set User Password  
I/O Interface Security  
System Mode state  
Secure Boot state  
Secure Boot Control  
Key Management  
NOT INSTALLED  
: Select Screen  
: Select Item  
Enter: Select  
→←  
↑↓  
+/— : Change Opt.  
User  
F1  
F9  
: General Help  
: Optimized Defaults  
F10 : Save & Exit  
ESC : Exit  
Enabled  
[Enabled]  
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.  
Notebook PC E-Manual  
81  
To set the password:  
1.  
On the Security screen, select Administrator Password or User  
Password.  
ꢀ.  
3.  
Type in a password then press  
.
Re-type to confirm the password then press  
.
To clear the password:  
1.  
On the Security screen, select Administrator Password or User  
Password.  
ꢀ.  
3.  
Type in the current password then press  
.
Leave the Create New Password field blank then press  
.
ꢁ.  
Select Yes in the confirmation box then press  
.
8ꢀ  
Notebook PC E-Manual  
I/O Interface Security  
In the Security menu, you can access I/O Interface Security to lock  
or unlock some interface functions of your Notebook PC.  
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.  
Security  
If Locked, LAN  
controller will  
be disabled.  
I/O Interface Security  
LAN Network Interface  
Wireless Network Interface  
HD AUDIO Interface  
[UnLock]  
[UnLock]  
[UnLock]  
USB Interface Security  
LAN Network Interface  
: Select Screen  
: Select Item  
→←  
↑↓  
Lock  
Enter: Select  
+/— : Change Opt.  
UnLock  
F1  
F9  
: General Help  
: Optimized  
Defaults  
F10 : Save & Exit  
ESC : Exit  
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.  
To lock an interface:  
1.  
ꢀ.  
On the Security screen, select I/O Interface Security.  
Select an interface you would like to lock then press  
.
3.  
Select Lock.  
Notebook PC E-Manual  
83  
USB Interface Security  
Through the I/O Interface Security menu, you can also access USB  
Interface Security to lock or unlock ports and devices.  
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.  
Security  
If Locked, all  
USB device will  
be disabled  
USB Interface Security  
USB Interface  
[UnLock]  
External Ports  
CMOS Camera  
Card Reader  
[UnLock]  
[UnLock]  
[UnLock]  
USB Interface  
: Select Screen  
: Select Item  
nter: Select  
→←  
↓  
Lock  
UnLock  
+/— : Change Opt.  
F1  
F9  
: General Help  
: Optimized  
Defaults  
F10 : Save & Exit  
ESC : Exit  
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.  
To lock the USB interface:  
1.  
ꢀ.  
On the Security screen, select I/O Interface Security > USB  
Interface Security.  
Select an interface that you would like to lock then select  
Lock.  
NOTE: Setting the USB Interface to Lock also locks and hides the  
External Ports and other devices included under USB Interface Security.  
8ꢁ  
Notebook PC E-Manual  
Set Master Password  
In the Security menu, you can use Set Master Password to set up  
a password-enabled access to your hard disk drive.  
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.  
Main  
Advanced  
Boot Security  
Save & Exit  
Password Description  
Set HDD Master  
If ONLY the Administrator’s password is  
set,then this only limits access to Setup  
and is only asked for when entering Setup.  
If ONLY the user’s password is set, then  
this is a power on password and must be  
entered to boot or enter Setup. In Setup,  
the User will have Administrator rights.  
Password.  
***Advisable to  
Power Cycle System  
after Setting Hard  
Disk Passwords***  
Administrator Password Status NOT INSTALLED  
User Password Status  
Administrator Password  
User Password  
NOT INSTALLED  
NOT INSTALLED  
: Select Screen  
: Select Item  
Enter: Select  
→←  
↑↓  
HDD Password Status :  
Set Master Password  
Set User Password  
+/— : Change Opt.  
F1  
F9  
: General Help  
: Optimized  
I/O Interface Security  
Defaults  
F10 : Save & Exit  
ESC : Exit  
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.  
To set the HDD password:  
1.  
ꢀ.  
On the Security screen, select Set Master Password.  
Type in a password then press  
.
3.  
ꢁ.  
Re-type to confirm the password then press  
.
Select Set User Password then repeat the previous steps to  
set up the user password.  
Notebook PC E-Manual  
8ꢂ  
Save & Exit  
To keep your configuration settings, select Save Changes and Exit  
before exiting the BIOS.  
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.  
Main  
Advanced  
Boot  
Security Save & Exit  
Exit system setup  
after saving the  
changes.  
Save Changes and Exit  
Discard Changes and Exit  
Save Options  
Save Changes  
Discard Changes  
Restore Defaults  
Boot Override  
Windows Boot Manager  
: Select Screen  
: Select Item  
→←  
↑↓  
Enter: Select  
+/— : Change Opt.  
Launch EFI Shell from filesystem device  
F1  
F9  
: General Help  
: Optimized Defaults  
F10 : Save & Exit  
ESC : Exit  
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.  
8ꢃ  
Notebook PC E-Manual  
To update the BIOS:  
1.  
Verify the Notebook PC’s exact model then download the latest  
BIOS file for your model from the ASUS website.  
ꢀ.  
3.  
Save a copy of the downloaded BIOS file to a flash disk drive.  
Connect your flash disk drive to your Notebook PC.  
ꢁ.  
ꢂ.  
Restart your Notebook PC then press  
during POST.  
From the BIOS menu, Select Advanced > Start Easy Flash, then  
press  
.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.  
Main Advanced  
Boot  
Security  
Save & Exit  
Press Enter to run  
the utility to  
select and update  
BIOS.  
Start Easy Flash  
Internal Pointing Device  
Wake on Lid Open  
[Enabled]  
[Enabled]  
[Enabled]  
Power Off Energy Saving  
SATA Configuration  
Graphics Configuration  
Intel (R) Anti-Theft Technology Corporation  
USB Configuration  
Network Stack  
: Select Screen  
: Select Item  
→←  
↑↓  
Enter: Select  
+/— : Change Opt.  
F1  
F9  
: General Help  
: Optimized Defaults  
F10 : Save & Exit  
ESC : Exit  
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.  
Notebook PC E-Manual  
8ꢄ  
ꢃ.  
Locate your downloaded BIOS file in the flash disk drive then  
press  
.
ASUSTek Easy Flash Utility  
FLASH TYPE: MXIC 25L Series  
New BIOS  
Platform: Unknown  
Current BIOS  
Platform: X452/X552  
Version: 101  
Version: Unknown  
Build Date: Unknown  
Build Time: Unknown  
Build Date: Oct 26 2012  
Build Time: 11:51:05  
FSO  
FS1  
FS2  
FS3  
FS4  
0 EFI  
<DIR>  
[←→]: Switch [↑↓]: Choose [q]: Exit [Enter]: Enter/Execute  
ꢄ.  
After the BIOS update process, select Exit > Restore Defaults to  
restore the system to its default settings.  
88  
Notebook PC E-Manual  
Troubleshoot  
By pressing  
during POST, you can access Windows® 8 troubleshoot  
options which includes the following:  
Refresh your PC  
Reset your PC  
Advanced options  
Refresh your PC  
Use Refresh your PC if you want to refresh your system without losing  
your current files and applications.  
To access this during POST:  
1.  
ꢀ.  
Restart your Notebook PC then press  
POST.  
during  
Wait for Windows® to load the Choose an option  
screen then click Troubleshoot.  
3.  
ꢁ.  
Click Refresh your PC.  
In the Refresh your PC screen, read the bullet points  
to learn more about using this option then click  
Next.  
ꢂ.  
ꢃ.  
ꢄ.  
Click the account you would like to refresh.  
Type your account password then click Continue.  
Click Refresh.  
IMPORTANT! Ensure that your Notebook PC is plugged in  
to a power source before refreshing your system.  
Notebook PC E-Manual  
8ꢅ  
Reset your PC  
IMPORTANT! Back up all your data before performing this option.  
Use Reset your PC to restore your Notebook PC to its default settings.  
To access this during POST:  
1.  
ꢀ.  
Restart your Notebook PC then press  
POST.  
during  
Wait for Windows® to load the Choose an option  
screen then click Troubleshoot.  
3.  
ꢁ.  
Click Reset your PC.  
In the Reset your PC screen, read the bullet points  
to learn more about using this option then click  
Next.  
ꢂ.  
ꢃ.  
Click your preferred reset option: Just remove my  
files or Fully clean the drive.  
Click Reset.  
IMPORTANT! Ensure that your Notebook PC is plugged in  
to a power source before resetting your system.  
ꢅ0  
Notebook PC E-Manual  
Advanced options  
Use Advanced options to perform additional troubleshooting options  
in your Notebook PC.  
To access this during POST:  
1.  
ꢀ.  
Restart your Notebook PC then press  
POST.  
during  
Wait for Windows® to load the Choose an option  
screen then click Troubleshoot.  
3.  
ꢁ.  
Click Advanced options.  
In the Advanced options screen, select the  
troubleshooting option you wish to perform.  
ꢂ.  
Follow the succeeding steps to complete the  
process.  
Using System Image Recovery  
Under Advanced options, you can use System Image Recovery to  
recover your system using your Notebook PC’s original image file.  
To access this during POST:  
1.  
Restart your Notebook PC then press  
POST.  
during  
ꢀ.  
3.  
Wait for Windows® to load the Choose an option  
screen then click Troubleshoot.  
Click Advanced options.  
Notebook PC E-Manual  
ꢅ1  
ꢁ.  
ꢂ.  
In the Advanced options screen, select System  
Image Recovery.  
Choose an account you would like to recover using  
a system image file.  
ꢃ.  
ꢄ.  
Type your account password then click Continue.  
Select Use the latest available system image  
(recommended), then click Next. You can also  
choose Select a system image if your system  
image is in an external device or DVD.  
8.  
Follow the succeeding steps to complete the  
system image recovery procedure.  
NOTE: We strongly recommend that you regularly backup  
your system to prevent data loss in case your Notebook  
PC stops working.  
ꢅꢀ  
Notebook PC E-Manual  
Chapter 6:  
Upgrading your Notebook PC  
Notebook PC E-Manual  
ꢅ3  
Installing a Random-access  
Memory module*  
Upgrade the memory capacity of your Notebook PC by installing a RAM  
(random-access memory module) in the memory module compartment.  
The following steps show you how to install a RAM module into your  
Notebook PC:  
WARNING! Disconnect all the connected peripherals, any telephone or  
telecommunication lines and power connector (such as external power  
supply, battery pack, etc.) before removing the compartment cover.  
IMPORTANT! Visit an authorized service center or retailer for information  
on RAM module upgrades for your Notebook PC. Purchase RAM modules  
from authorized retailers of this Notebook PC to ensure maximum  
compatibility and reliability.  
NOTE: The appearance of your Notebook PC’s bottom side and RAM  
module may vary per model but the RAM module installation remains the  
same.  
* on selected models only  
ꢅꢁ  
Notebook PC E-Manual  
A.  
B.  
Loosen the screw of the Notebook PC’s compartment cover.  
Pull out the compartment cover and remove it completely from  
your Notebook PC.  
Notebook PC E-Manual  
ꢅꢂ  
C.  
D.  
Align and insert the RAM module into the RAM module slot.  
Push down the RAM module until it clicks in place  
30o angle  
notches  
E.  
F.  
Align then push down the compartment cover back into place.  
Reattach and tighten the screw that you removed earlier.  
ꢅꢃ  
Notebook PC E-Manual  
Replacing the Hard Disk Drive*  
Refer to the following steps if you need to replace the HDD (hard disk  
drive) of your Notebook PC.  
IMPORTANT! Purchase an HDD from authorized retailers of this Notebook  
PC to ensure maximum compatibility and reliability. It is recommended  
that you replace the HDD under professional supervision. You may also  
visit an authorized service center for further assistance.  
WARNING! Disconnect all the connected peripherals, any telephone or  
telecommunication lines and power connector (such as external power  
supply, battery pack, etc.) before removing the compartment cover.  
NOTE: The appearance of your Notebook PC’s bottom side and HDD may  
vary per model but the HDD installation remains the same.  
* on selected models only  
Notebook PC E-Manual  
ꢅꢄ  
A.  
B.  
Loosen the screw of the Notebook PC’s compartment cover.  
Pull out the compartment cover and remove it completely from  
your Notebook PC.  
ꢅ8  
Notebook PC E-Manual  
C.  
D.  
Remove the screws securing the HDD bay to the compartment.  
Disconnect the HDD bay from the HDD port then remove the  
HDD bay from the compartment.  
HDD bay  
Notebook PC E-Manual  
ꢅꢅ  
E.  
F.  
Turn the HDD bay upside down then remove the screws.  
Remove the old HDD from the HDD bay.  
HDD  
G.  
H.  
Place the new HDD with its PCB (printed circuit board) facing the  
HDD bay. Ensure that the port connectors of your HDD are not  
obstructed by any part of the HDD bay.  
Reattach and secure the HDD with the screws you removed  
earlier.  
100  
Notebook PC E-Manual  
I.  
Replace the HDD bay back in the compartment, with the HDD  
connector aligned with the Notebook PC’s HDD port. Push the  
HDD bay until it connects with the Notebook PC.  
J.  
Secure the HDD bay with the screws you removed earlier.  
HDD bay  
Notebook PC E-Manual  
101  
K.  
L.  
Align then push down the compartment cover back into place.  
Reattach and tighten the screw that you removed earlier.  
10ꢀ  
Notebook PC E-Manual  
Installing a new battery pack*  
WARNING! Turn off your Notebook PC and disconnect all connected  
peripherals, any telephone or telecommunication lines and power  
connector, before removing the battery pack.  
IMPORTANT! Purchase battery packs from authorized retailers of this  
Notebook PC to ensure maximum compatibility and reliability.  
NOTE: The following steps are also applicable for removing and replacing  
the battery pack of your Notebook PC.  
* on selected models only  
Notebook PC E-Manual  
103  
Refer to the following steps when installing a new battery pack for your  
Notebook PC.  
A.  
B.  
C.  
Move the manual battery lock to the unlocked position.  
Move and hold the spring battery lock to an unlocked position.  
Pull out the old battery pack from the battery slot then release  
your hold on the spring battery lock.  
10ꢁ  
Notebook PC E-Manual  
D.  
E.  
Move the manual battery lock to the unlocked position.  
Align and insert the new battery pack into the Notebook PC’s  
battery slot.  
F.  
Move the manual battery lock back to the locked position after  
inserting the battery pack.  
Notebook PC E-Manual  
10ꢂ  
10ꢃ  
Notebook PC E-Manual  
Appendices  
Notebook PC E-Manual  
10ꢄ  
DVD-ROM Drive Information*  
The DVD-ROM drive allows you to view and create your own CDs and DVDs. You  
can purchase an optional DVD viewer software to view DVD titles.  
Regional Playback Information  
Playback of DVD movie titles involves decoding MPEGꢀ video, digital AC3 audio  
and decryption of CSS protected content. CSS (sometimes called copy guard) is  
the name given to the content protection scheme adopted by the motion picture  
industry to satisfy a need to protect against unlawful content duplication.  
Although the design rules imposed on CSS licensors are many, one rule that is  
most relevant is playback restrictions on regionalized content. In order to facilitate  
geographically staggered movie releases, DVD video titles are released for specific  
geographic regions as defined in “Region Definitions” below. Copyright laws require  
that all DVD movies be limited to a particular region (usually coded to the region at  
which it is sold). While DVD movie content may be released for multiple regions, CSS  
design rules require that any system capable of playing CSS encrypted content must  
only be capable of playing one region.  
IMPORTANT! The region setting may be changed up to five times using the viewer  
software, then it can only play DVD movies for the last region setting. Changing the  
region code after that will require factory resetting which is not covered by warranty. If  
resetting is desired, shipping and resetting costs will be at the expense of the user.  
* on selected models only  
108  
Notebook PC E-Manual  
Region Definitions  
Region 1  
Canada, US, US Territories  
Region 2  
Czech, Egypt, Finland, France, Germany, Gulf States, Hungary, Iceland, Iran,  
Iraq, Ireland, Italy, Japan, Netherlands, Norway, Poland, Portugal, Saudi Arabia,  
Scotland, South Africa, Spain, Sweden, Switzerland, Syria, Turkey, UK, Greece,  
Former Yugoslav Republics, Slovakia  
Region 3  
Burma, Indonesia, South Korea, Malaysia, Philippines, Singapore, Taiwan, Thailand,  
Vietnam  
Region 4  
Australia, Caribbean (Except US Territories), Central America, New Zealand, Pacific  
Islands, South America  
Region 5  
CIS, India, Pakistan, Rest of Africa, Russia, North Korea  
Region 6  
China  
Notebook PC E-Manual  
10ꢅ  
Blu-ray ROM Drive Information*  
The Blu-ray ROM Drive allows you to view high definition (HD) videos and other  
disc file formats such as DVDs and CDs.  
Region Definitions  
Region A  
North, Central and South American countries, and their territories; Taiwan, Hong  
Kong, Macao, Japan, Korea (South and North), South East Asian countries and their  
territories.  
Region B  
European, African, and South West Asian countries and their territories; Australia  
and New Zealand.  
Region C  
Central, South Asian, Eastern European countries and their territories; China and  
Mongolia.  
NOTE: Refer to Blu-ray Disc website at www.blu-raydisc.com/en/Technical/FAQs/Blu-  
rayDiscforVideo.aspx for more details.  
* on selected models only  
Internal Modem Compliancy  
The Notebook PC with internal modem model complies with JATE (Japan), FCC  
(US, Canada, Korea, Taiwan), and CTRꢀ1. The internal modem has been approved  
in accordance with Council Decision ꢅ8/ꢁ8ꢀ/EC for pan-European single terminal  
connection to the public switched telephone network (PSTN). However due  
to differences between the individual PSTNs provided in different countries,  
the approval does not, of itself, give an unconditional assurance of successful  
operation on every PSTN network termination point. In the event of problems you  
should contact your equipment supplier in the first instance.  
110  
Notebook PC E-Manual  
Overview  
On ꢁth August 1ꢅꢅ8 the European Council Decision regarding the CTR ꢀ1 has  
been published in the Official Journal of the EC. The CTR ꢀ1 applies to all non  
voice terminal equipment with DTMF-dialling which is intended to be connected  
to the analogue PSTN (Public Switched Telephone Network).  
CTR ꢀ1 (Common Technical Regulation) for the attachment requirements for  
connection to the analogue public switched telephone networks of terminal  
equipment (excluding terminal equipment supporting the voice telephony  
justified case service) in which network addressing, if provided, is by means of  
dual tone multifrequency signalling.  
Network Compatibility Declaration  
Statement to be made by the manufacturer to the Notified Body and the vendor:  
“This declaration will indicate the networks with which the equipment is designed  
to work and any notified networks with which the equipment may have inter-  
working difficulties.”  
Statement to be made by the manufacturer to the user: “This declaration will  
indicate the networks with which the equipment is designed to work and any  
notified networks with which the equipment may have inter-working difficulties.  
The manufacturer shall also associate a statement to make it clear where network  
compatibility is dependent on physical and software switch settings. It will also  
advise the user to contact the vendor if it is desired to use the equipment on  
another network.”  
Up to now the Notified Body of CETECOM issued several pan-European approvals  
using CTR ꢀ1. The results are Europe’s first modems which do not require  
regulatory approvals in each individual European country.  
Non-Voice Equipment  
Answering machines and loud-speaking telephones can be eligible as well as  
modems, fax machines, auto-dialers and alarm systems. Equipment in which the  
end-to-end quality of speech is controlled by regulations (e.g. handset telephones  
and in some countries also cordless telephones) is excluded.  
Notebook PC E-Manual  
111  
This table shows the countries currently under the  
CTR21 standard.  
Country  
Austria1  
Applied  
Yes  
More Testing  
No  
Belgium  
Czech Republic  
Denmark1  
Finland  
Yes  
No  
No  
Not Applicable  
Yes  
Yes  
Yes  
No  
France  
Yes  
No  
Germany  
Greece  
Yes  
No  
Yes  
No  
Hungary  
Iceland  
No  
Not Applicable  
Yes  
No  
Ireland  
Yes  
No  
Italy  
Still Pending  
No  
Still Pending  
Israel  
No  
Lichtenstein  
Luxemburg  
The Netherlands1  
Norway  
Yes  
No  
Yes  
No  
Yes  
Yes  
Yes  
No  
Poland  
No  
Not Applicable  
Portugal  
Spain  
No  
Not Applicable  
No  
Not Applicable  
Sweden  
Yes  
No  
No  
No  
Switzerland  
United Kingdom  
Yes  
Yes  
11ꢀ  
Notebook PC E-Manual  
This information was copied from CETECOM and is supplied without liability. For  
updates to this table, you may visit http://www.cetecom.de/technologies/ctr_ꢀ1.  
html  
1 National requirements will apply only if the equipment may use pulse dialling  
(manufacturers may state in the user guide that the equipment is only intended to  
support DTMF signalling, which would make any additional testing superfluous).  
In The Netherlands additional testing is required for series connection and caller  
ID facilities.  
Federal Communications Commission  
Interference Statement  
This device complies with FCC Rules Part 1ꢂ. Operation is subject to the following  
two conditions:  
This device may not cause harmful interference.  
This device must accept any interference received, including interference  
that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a class  
B digital device, pursuant to Part 1ꢂ of the Federal Communications Commission  
(FCC) rules. These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment generates, uses,  
and can radiate radio frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Notebook PC E-Manual  
113  
Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
WARNING! The use of a shielded-type power cord is required in order to meet  
FCC emission limits and to prevent interference to the nearby radio and television  
reception. It is essential that only the supplied power cord be used. Use only shielded  
cables to connect I/O devices to this equipment. You are cautioned that changes or  
modifications not expressly approved by the party responsible for compliance could  
void your authority to operate the equipment.  
(Reprinted from the Code of Federal Regulations #ꢁꢄ, part 1ꢂ.1ꢅ3, 1ꢅꢅ3.  
Washington DC: Office of the Federal Register, National Archives and Records  
Administration, U.S. Government Printing Office.)  
FCC Radio Frequency (RF) Exposure Caution  
Statement  
WARNING! Any changes or modifications not expressly approved by the party  
responsible for compliance could void the user’s authority to operate this equipment.  
“The manufacture declares that this device is limited to Channels 1 through 11 in the  
ꢀ.ꢁGHz frequency by specified firmware controlled in the USA.”  
This equipment complies with FCC radiation exposure limits set forth for an  
uncontrolled environment. To maintain compliance with FCC RF exposure  
compliance requirements, please avoid direct contact to the transmitting antenna  
during transmitting. End users must follow the specific operating instructions for  
satisfying RF exposure compliance.  
11ꢁ  
Notebook PC E-Manual  
Declaration of Conformity (R&TTE directive  
1999/5/EC)  
The following items were completed and are considered relevant and sufficient:  
Essential requirements as in [Article 3]  
Protection requirements for health and safety as in [Article 3.1a]  
Testing for electric safety according to [EN ꢃ0ꢅꢂ0]  
Protection requirements for electromagnetic compatibility in [Article 3.1b]  
Testing for electromagnetic compatibility in [EN 301 ꢁ8ꢅ-1] & [EN 301  
ꢁ8ꢅ-1ꢄ]  
Effective use of the radio spectrum as in [Article 3.ꢀ]  
Radio test suites according to [EN 300 3ꢀ8-ꢀ]  
CE Marking  
CE marking for devices without wireless LAN/Bluetooth  
The shipped version of this device complies with the requirements of the EEC  
directives ꢀ00ꢁ/108/EC “Electromagnetic compatibilityand ꢀ00ꢃ/ꢅꢂ/EC “Low  
voltage directive.  
CE marking for devices with wireless LAN/ Bluetooth  
This equipment complies with the requirements of Directive 1ꢅꢅꢅ/ꢂ/EC of the  
European Parliament and Commission from ꢅ March, 1ꢅꢅꢅ governing Radio and  
Telecommunications Equipment and mutual recognition of conformity.  
Notebook PC E-Manual  
11ꢂ  
IC Radiation Exposure Statement for Canada  
This equipment complies with IC radiation exposure limits set forth for an  
uncontrolled environment. To maintain compliance with IC RF exposure  
compliance requirements, please avoid direct contact to the transmitting antenna  
during transmitting. End users must follow the specific operating instructions for  
satisfying RF exposure compliance.  
Operation is subject to the following two conditions:  
This device may not cause interference and  
This device must accept any interference, including interference that may  
cause undesired operation of the device.  
To prevent radio interference to the licensed service (i.e. co-channel Mobile  
Satellite systems) this device is intended to be operated indoors and away from  
windows to provide maximum shielding. Equipment (or its transmit antenna) that  
is installed outdoors is subject to licensing.  
This device complies with Industry Canada licence-exempt RSS standard(s).  
CAN ICES-3(B)/NMB-3(B)  
11ꢃ  
Notebook PC E-Manual  
Déclaration d’Industrie Canada relative à l’  
exposition aux ondes radio  
Cet appareil est conforme aux limites d’exposition aux radiations d’Industrie  
Canada définies pour un environnement non-contrôlé. Pour maintenir la  
conformité avec les exigences d’exposition RF d’IC, veuillez éviter tout contact  
direct avec l’antenne pendant l’émission. Les utilisateurs finaux doivent suivre  
les instructions de fonctionnement spécifiques pour satisfaire la conformité aux  
expositions RF.  
Son utilisation est sujette aux deux conditions suivantes :  
Cet appareil ne peut pas causer d’interférence, et  
Cet appareil doit accepter toute interférence, y compris les interférences  
qui pourraient causer un fonctionnement non souhaité de l’appareil.  
Pour éviter les interférences radio avec le service sous licence (c’est à-dire le  
partage de canal avec les systèmes de téléphonie satellite), cet appareil est destiné  
à être utilisé en intérieur et loin des fenêtres pour fournir un blindage maximal.  
Tout appareil (ou son antenne d’émission) qui est installé en extérieur est sujet à  
cette licence.  
Le present appareil est conforme aux CNR d’Industrie Canada applicables aux  
appareils radio exempts de licence.  
CAN ICES-3(B)/NMB-3(B)  
Notebook PC E-Manual  
11ꢄ  
Wireless Operation Channel for Different  
Domains  
N. America  
Japan  
ꢀ.ꢁ1ꢀ-ꢀ.ꢁꢃꢀ GHz  
ꢀ.ꢁ1ꢀ-ꢀ.ꢁ8ꢁ GHz  
Ch01 through CH11  
Ch01 through Ch1ꢁ  
Europe ETSI  
ꢀ.ꢁ1ꢀ-ꢀ.ꢁꢄꢀ GHz  
Ch01 through Ch13  
France Restricted Wireless Frequency Bands  
Some areas of France have a restricted frequency band. The worst case maximum  
authorized power indoors are:  
10mW for the entire ꢀ.ꢁ GHz band (ꢀꢁ00 MHz–ꢀꢁ83.ꢂ MHz)  
100mW for frequencies between ꢀꢁꢁꢃ.ꢂ MHz and ꢀꢁ83.ꢂ MHz  
NOTE: Channels 10 through 13 inclusive operate in the band ꢀꢁꢁꢃ.ꢃ MHz to ꢀꢁ83.ꢂ  
MHz.  
There are few possibilities for outdoor use: on private property or on the private  
property of public persons, use is subject to a preliminary authorization procedure  
by the Ministry of Defense, with maximum authorized power of 100mW in the  
ꢀꢁꢁꢃ.ꢂ–ꢀꢁ83.ꢂ MHz band. Use outdoors on public property is not permitted.  
In the departments listed below, for the entire ꢀ.ꢁ GHz band:  
Maximum authorized power indoors is 100mW  
Maximum authorized power outdoors is 10mW  
118  
Notebook PC E-Manual  
Departments in which the use of the ꢀꢁ00–ꢀꢁ83.ꢂ MHz band is permitted with an  
EIRP of less than 100mW indoors and less than 10mW outdoors:  
01 Ain  
0ꢀ Aisne  
03 Allier  
0ꢂ Hautes Alpes  
08 Ardennes  
0ꢅ Ariège  
11 Aude  
1ꢀ Aveyron  
ꢀꢂ Doubs  
1ꢃ Charente  
ꢀꢃ Drôme  
ꢀꢁ Dordogne  
3ꢀ Gers  
3ꢃ Indre  
ꢁꢂ Loiret  
ꢂ8 Nièvre  
3ꢄ Indre et Loire  
ꢂ0 Manche  
ꢂꢅ Nord  
ꢁ1 Loir et Cher  
ꢂꢂ Meuse  
ꢃ0 Oise  
ꢃ1 Orne  
ꢃ3 Puy du Dôme  
ꢃꢁ Pyrénées Atlantique  
ꢃ8 Haut Rhin  
ꢃꢃ Pyrénées Orientales  
ꢄ0 Haute Saône  
ꢃꢄ Bas Rhin  
ꢄ1 Saône et Loire  
ꢄꢂ Paris  
8ꢀ Tarn et Garonne  
8ꢅ Yonne  
8ꢁ Vaucluse  
88 Vosges  
ꢅ0 Territoire de Belfort  
ꢅꢁ Val de Marne  
This requirement is likely to change over time, allowing you to use your wireless  
LAN card in more areas within France. Please check with ART for the latest  
information (www.arcep.fr)  
NOTE: Your WLAN Card transmits less than 100mW, but more than 10mW.  
Notebook PC E-Manual  
11ꢅ  
UL Safety Notices  
Required for UL 1ꢁꢂꢅ covering telecommunications (telephone) equipment  
intended to be electrically connected to a telecommunication network that has an  
operating voltage to ground that does not exceed ꢀ00V peak, 300V peak-to-peak,  
and 10ꢂV rms, and installed or used in accordance with the National Electrical  
Code (NFPA ꢄ0).  
When using the Notebook PC modem, basic safety precautions should always be  
followed to reduce the risk of fire, electric shock, and injury to persons, including  
the following:  
DO NOT use the Notebook PC near water, for example, near a bath tub,  
wash bowl, kitchen sink or laundry tub, in a wet basement or near a  
swimming pool.  
DO NOT use the Notebook PC during an electrical storm. There may be a  
remote risk of electric shock from lightning.  
DO NOT use the Notebook PC in the vicinity of a gas leak.  
Required for UL 1ꢃꢁꢀ covering primary (nonrechargeable) and secondary  
(rechargeable) lithium batteries for use as power sources in products. These  
batteries contain metallic lithium, or a lithium alloy, or a lithium ion, and may  
consist of a single electrochemical cell or two or more cells connected in series,  
parallel, or both, that convert chemical energy into electrical energy by an  
irreversible or reversible chemical reaction.  
Do not dispose the Notebook PC battery pack in a fire, as they may  
explode. Check with local codes for possible special disposal instructions  
to reduce the risk of injury to persons due to fire or explosion.  
Do not use power adapters or batteries from other devices to reduce the  
risk of injury to persons due to fire or explosion. Use only UL certified  
power adapters or batteries supplied by the manufacturer or authorized  
retailers.  
1ꢀ0  
Notebook PC E-Manual  
Power Safety Requirement  
Products with electrical current ratings up to ꢃA and weighing more than 3Kg  
must use approved power cords greater than or equal to: H0ꢂVV-F, 3G, 0.ꢄꢂmmor  
H0ꢂVV-F, G, 0.ꢄꢂmm.  
TV Notices  
Note to CATV System Installer—Cable distribution system should be grounded  
(earthed) in accordance with ANSI/NFPA ꢄ0, the National Electrical Code (NEC),  
in particular Section 8ꢀ0.ꢅ3, Grounding of Outer Conductive Shield of a Coaxial  
Cable – installation should include bonding the screen of the coaxial cable to the  
earth at the building entrance.  
REACH  
Complying with the REACH (Registration, Evaluation, Authorization, and  
Restriction of Chemicals) regulatory framework, we publish the chemical  
substances in our products at ASUS REACH website at http://csr.asus.com/english/  
REACH.htm.  
Macrovision Corporation Product Notice  
This product incorporates copyright protection technology that is protected by  
method claims of certain U.S.A. patents and other intellectual property rights  
owned by Macrovision Corporation and other rights owners. Use of this copyright  
protection technology must be authorized by Macrovision Corporation, and  
is intended for home and other limited viewing uses only unless otherwise  
authorized by Macrovision Corporation. Reverse engineering or disassembly is  
prohibited.  
Prevention of Hearing Loss  
To prevent possible hearing damage, do not listen at high volume  
levels for long periods.  
Notebook PC E-Manual  
1ꢀ1  
Nordic Lithium Cautions (for lithium-ion  
batteries)  
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with  
the same or equivalent type recommended by the manufacturer. Dispose of used  
batteries according to the manufacturer’s instructions. (English)  
ATTENZIONE! Rischio di esplosione della batteria se sostituita in modo errato.  
Sostituire la batteria con un una di tipo uguale o equivalente consigliata dalla  
fabbrica. Non disperdere le batterie nell’ambiente. (Italian)  
VORSICHT! Explosionsgefahr bei unsachgemäßen Austausch der Batterie. Ersatz  
nur durch denselben oder einem vom Hersteller empfohlenem ähnlichen Typ.  
Entsorgung gebrauchter Batterien nach Angaben des Herstellers. (German)  
ADVARSELI! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning  
må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri  
tilbage til leverandøren. (Danish)  
VARNING! Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller  
en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt  
batteri enligt fabrikantens instruktion. (Swedish)  
VAROITUS! Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo  
ainoastaan laitevalmistajan sousittelemaan tyyppiin. Hävitä käytetty paristo  
valmistagan ohjeiden mukaisesti. (Finnish)  
ATTENTION! Il y a danger d’explosion s’il y a remplacement incorrect de la  
batterie. Remplacer uniquement avec une batterie du mêre type ou d’un type  
équivalent recommandé par le constructeur. Mettre au rebut les batteries usagées  
conformément aux instructions du fabricant. (French)  
ADVARSEL! Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme  
batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte  
batterier kasseres i henhold til fabrikantens instruksjoner. (Norwegian)  
(Japanese)  
ВНИМАНИЕ! При замене аккумулятора на аккумулятор иного типа возможно  
его возгорание. Утилизируйте аккумулятор в соответствии с инструкциями  
производителя. (Russian)  
1ꢀꢀ  
Notebook PC E-Manual  
Optical Drive Safety Information  
Laser Safety Information  
CD-ROM Drive Safety Warning  
CLASS 1 LASER PRODUCT  
WARNING! To prevent exposure to the optical drive’s laser, do not attempt to  
disassemble or repair the optical drive by yourself. For your safety, contact a  
professional technician for assistance.  
Service warning label  
WARNING! INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM OR  
VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.  
CDRH Regulations  
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug  
Administration implemented regulations for laser products on August ꢀ, 1ꢅꢄꢃ.  
These regulations apply to laser products manufactured from August 1, 1ꢅꢄꢃ.  
Compliance is mandatory for products marketed in the United States.  
WARNING! Use of controls or adjustments or performance of procedures other  
than those specified herein or in the laser product installation guide may result in  
hazardous radiation exposure.  
Coating Notice  
IMPORTANT! To provide electrical insulation and maintain electrical safety, a  
coating is applied to insulate the device except on the areas where the I/O ports  
are located.  
Notebook PC E-Manual  
1ꢀ3  
CTR 21 Approval (for Notebook PC with built-in  
Modem)  
Danish  
Dutch  
English  
Finnish  
French  
1ꢀꢁ  
Notebook PC E-Manual  
German  
Greek  
Italian  
Portuguese  
Spanish  
Swedish  
Notebook PC E-Manual  
1ꢀꢂ  
ENERGY STAR complied product  
ENERGY STAR is a joint program of the U.S. Environmental  
Protection Agency and the U.S. Department of Energy helping  
us all save money and protect the environment through energy  
efficient products and practices.  
All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR  
standard, and the power management feature is enabled by default. The  
monitor and computer are automatically set to sleep after 1ꢂ and 30 minutes  
of user inactivity. To wake your computer, click the mouse or press any key on  
the keyboard. Please visit http://www.energy.gov/powermanagement for detail  
information on power management and its benefits to the environment. In  
addition, please visit http://www.energystar.gov for detail information on the  
ENERGY STAR joint program.  
NOTE: Energy Star is NOT supported on FreeDOS and Linux-based operating systems.  
European Union Eco-label  
This Notebook PC has been awarded the EU Flower label, which means that this  
product has the following characteristics:  
1.  
ꢀ.  
3.  
ꢁ.  
ꢂ.  
Decreased energy consumption during use and stand-by modes.  
Limited use of toxic heavy metals.  
Limited use of substances harmful to the environment and health.  
Reduction of the use of natural resources by encouraging recycling.  
Designed for easy upgrades and longer lifetime through providing  
compatible spare parts such as batteries, power supplies, the keyboard, the  
memory, and if available the CD drive or DVD drive.  
ꢃ.  
Reduced solid waste through takeback policy.  
For more information on the EU Flower label, please visit the European Union Eco-  
label website at http://www.ecolabel.eu.  
1ꢀꢃ  
Notebook PC E-Manual  
Global Environmental Regulation Compliance  
and Declaration  
ASUS follows the green design concept to design and manufacture our products,  
and makes sure that each stage of the product life cycle of ASUS product is in line  
with global environmental regulations. In addition, ASUS disclose the relevant  
information based on regulation requirements.  
Please refer to http://csr.asus.com/english/Compliance.htm for information  
disclosure based on regulation requirements ASUS is complied with:  
Japan JIS-C-0950 Material Declarations  
EU REACH SVHC  
Korea RoHS  
Swiss Energy Laws  
ASUS Recycling/Takeback Services  
ASUS recycling and takeback programs come from our commitment to the  
highest standards for protecting our environment. We believe in providing  
solutions for you to be able to responsibly recycle our products, batteries, other  
components as well as the packaging materials. Please go to http://csr.asus.com/  
english/Takeback.htm for detailed recycling information in different regions.  
Regional notice for Singapore  
This ASUS product complies with IDA Standards.  
Complies with  
IDA Standards  
DB103778  
Notebook PC E-Manual  
1ꢀꢄ  
EC Declaration of Conformity  
EC Declaration of Conformity  
EC Declaration of Conformity  
We, the undersigned,  
We, the undersigned,  
Manufacturer:  
ASUSTeK COMPUTER INC.  
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN  
TAIWAN  
We, the undersigned,  
Manufacturer:  
ASUSTeK COMPUTER INC.  
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN  
TAIWAN  
Address, City:  
Manufacturer:  
ASUSTeK COMPUTER INC.  
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN  
TAIWAN  
Address, City:  
Country:  
Address, City:  
Country:  
Authorized representative in Europe:  
Address, City:  
ASUS COMPUTER GmbH  
HARKORT STR. 21-23, 40880 RATINGEN  
GERMANY  
Country:  
Authorized representative in Europe:  
Address, City:  
ASUS COMPUTER GmbH  
HARKORT STR. 21-23, 40880 RATINGEN  
GERMANY  
Authorized representative in Europe:  
Address, City:  
ASUS COMPUTER GmbH  
HARKORT STR. 21-23, 40880 RATINGEN  
GERMANY  
Country:  
Country:  
declare the following apparatus:  
Country:  
declare the following apparatus:  
Product name  
Model name  
:
Notebook PC  
declare the following apparatus:  
Product name  
Model name  
:
Notebook PC  
X550V, F550V, K550V, A550V, R510V, X550C, F550C, K550C, A550C,  
R510C, X552C, X552V, F552C, F552V, R513C, R513V, D552C, D552V,  
P552C, P552V, Y581C, X550E, F550E, R510E, D551E, X552E, F552E,  
R513E, D552E, P552E  
:
Product name  
Model name  
:
Notebook PC  
:
X452E, F452E, R412E, D452E  
:
X450V, A450V, K450V, F450V, R409V, X450C, A450C,  
K450C, F450C, R409C, X452V, F452V, R412V, D452V,  
PRO450V, X452C, F452C, R412C, D452C, Y482C, E450C  
conform with the essential requirements of the following directives:  
2004/108/EC-EMC Directive  
EN 55022:2010  
EN 55024:2010  
conform with the essential requirements of the following directives:  
2004/108/EC-EMC Directive  
EN 61000-3-2:2006+A2:2009  
EN 55013:2001+A1:2003+A2:2006  
EN 61000-3-3:2008  
EN 55020:2007+A11:2011  
conform with the essential requirements of the following directives:  
2004/108/EC-EMC Directive  
1999/5/EC-R &TTE Directive  
EN 55022:2010  
EN 55024:2010  
EN 55022:2010  
EN 55024:2010  
EN 300 328 V1.7.1(2006-10)  
EN 300 440-1 V1.6.1(2010-08)  
EN 300 440-2 V1.4.1(2010-08)  
EN 301 511 V9.0.2(2003-03)  
EN 301 908-1 V5.2.1(2011-05)  
EN 301 908-2 V5.2.1(2011-07)  
EN 301 893 V1.6.1(2011-11)  
EN 302 544-2 V1.1.1(2009-01)  
EN 302 623 V1.1.1(2009-01)  
EN 50360:2001  
EN 301 489-1 V1.9.2(2011-09)  
EN 301 489-3 V1.4.1(2002-08)  
EN 301 489-4 V1.4.1(2009-05)  
EN 301 489-7 V1.3.1(2005-11)  
EN 301 489-9 V1.4.1(2007-11)  
EN 301 489-17 V2.1.1(2009-05)  
EN 301 489-24 V1.5.1(2010-09)  
EN 302 326-2 V1.2.2(2007-06)  
EN 302 326-3 V1.3.1(2007-09)  
EN 301 357-2 V1.4.1(2008-11)  
EN 302 291-1 V1.1.1(2005-07)  
EN 302 291-2 V1.1.1(2005-07)  
EN 61000-3-2:2006+A2:2009  
EN 55013:2001+A1:2003+A2:2006  
EN 61000-3-3:2008  
EN 55020:2007+A11:2011  
EN 61000-3-2:2006+A2:2009  
EN 55013:2001+A1:2003+A2:2006  
EN 61000-3-3:2008  
EN 55020:2007+A11:2011  
1999/5/EC-R &TTE Directive  
1999/5/EC-R &TTE Directive  
EN 300 328 V1.7.1(2006-10)  
EN 300 440-1 V1.6.1(2010-08)  
EN 300 440-2 V1.4.1(2010-08)  
EN 301 511 V9.0.2(2003-03)  
EN 301 908-1 V5.2.1(2011-05)  
EN 301 908-2 V5.2.1(2011-07)  
EN 301 893 V1.6.1(2011-11)  
EN 302 544-2 V1.1.1(2009-01)  
EN 302 623 V1.1.1(2009-01)  
EN 300 330-1 V1.7.1(2010-02)  
EN 300 330-2 V1.5.1(2010-02)  
EN 50360:2001  
EN 301 489-1 V1.9.2(2011-09)  
EN 301 489-3 V1.4.1(2002-08)  
EN 301 489-4 V1.4.1(2009-05)  
EN 301 489-7 V1.3.1(2005-11)  
EN 301 489-9 V1.4.1(2007-11)  
EN 301 489-17 V2.1.1(2009-05)  
EN 301 489-24 V1.5.1(2010-09)  
EN 302 326-2 V1.2.2(2007-06)  
EN 302 326-3 V1.3.1(2007-09)  
EN 301 357-2 V1.4.1(2008-11)  
EN 302 291-1 V1.1.1(2005-07)  
EN 302 291-2 V1.1.1(2005-07)  
EN 62311:2008  
EN 300 328 V1.7.1(2006-10)  
EN 300 440-1 V1.6.1(2010-08)  
EN 300 440-2 V1.4.1(2010-08)  
EN 301 511 V9.0.2(2003-03)  
EN 301 908-1 V5.2.1(2011-05)  
EN 301 908-2 V5.2.1(2011-07)  
EN 301 893 V1.6.1(2011-11)  
EN 302 544-2 V1.1.1(2009-01)  
EN 302 623 V1.1.1(2009-01)  
EN 50360:2001  
EN 301 489-1 V1.9.2(2011-09)  
EN 301 489-3 V1.4.1(2002-08)  
EN 301 489-4 V1.4.1(2009-05)  
EN 301 489-7 V1.3.1(2005-11)  
EN 301 489-9 V1.4.1(2007-11)  
EN 301 489-17 V2.1.1(2009-05)  
EN 301 489-24 V1.5.1(2010-09)  
EN 302 326-2 V1.2.2(2007-06)  
EN 302 326-3 V1.3.1(2007-09)  
EN 301 357-2 V1.4.1(2008-11)  
EN 302 291-1 V1.1.1(2005-07)  
EN 302 291-2 V1.1.1(2005-07)  
EN 62479:2010  
EN 50385:2002  
EN 62311:2008  
2006/95/EC-LVD Directive  
EN 62479:2010  
EN 50385:2002  
EN 60950-1  
/
A12:2011  
EN 60065:2002 A12:2011  
/
EN 62479:2010  
EN 62311:2008  
2009/125/EC-ErP Directive  
Regulation (EC) No. 1275/2008  
Regulation (EC) No. 642/2009  
2006/95/EC-LVD Directive  
2006/95/EC-LVD Directive  
Regulation (EC) No. 278/2009  
EN 60950-1  
/
A12:2011  
EN 60065:2002 A12:2011  
/
EN 60950-1  
/
A12:2011  
EN 60065:2002 A12:2011  
/
2009/125/EC-ErP Directive  
Regulation (EC) No. 1275/2008  
Regulation (EC) No. 642/2009  
2009/125/EC-ErP Directive  
Regulation (EC) No. 1275/2008  
Regulation (EC) No. 642/2009  
2011/65/EU-RoHS Directive  
CE marking  
Ver. 130208  
Regulation (EC) No. 278/2009  
Regulation (EC) No. 278/2009  
2011/65/EU-RoHS Directive  
CE marking  
Ver. 130208  
2011/65/EU-RoHS Directive  
CE marking  
Ver. 130208  
(EC conformity marking)  
Position  
Name  
:
CEO  
(EC conformity marking)  
(EC conformity marking)  
:
Jerry Shen  
Position  
Name  
:
CEO  
Position  
Name  
:
CEO  
:
Jerry Shen  
:
Jerry Shen  
Declaration Date: 30/08/2013  
Year to begin affixing CE marking:2013  
Signature  
:
__________  
Declaration Date: 30/07/2013  
Declaration Date: 22/08/2013  
Year to begin affixing CE marking:2013  
Year to begin affixing CE marking:2013  
Signature  
:
__________  
Signature  
:
__________  

Toshiba Air Conditioner Rav Sm1102ut E User Manual
Samsung Um 19a1 B1 E2 User Manual
Panasonic Cw Xc82yu User Manual
Microwave Manual Control1 User Manual
LG 55LB6350 User Manual
LG 39LY340C User Manual
JVC DX J36UX User Manual
DELL 1409X User Manual
CRAFTSMAN 944.601880 User Manual
CRAFTSMAN 917.373981 User Manual