ASUS X01AD ZB633KL User Manual

User Guide  
15060-0NE4R000  
E14752  
Side and rear features  
Microphone  
Audio jack  
Camera flash  
Rear cameras  
Fingerprint sensor  
Volume  
key  
Power  
key  
Eject hole  
Nano SIM1, Nano SIM2, Micro SD card slot  
Speaker  
Microphone  
Micro USB port  
Charging your ASUS Phone  
To charge your ASUS Phone:  
1. Connect the USB connector into the power  
adapter’s USB port.  
2. Connect the other end of the USB cable to your  
ASUS Phone.  
3. Plug the power adapter into a wall socket.  
3
2
1
IMPORTANT!  
When using your ASUS Phone while it is plugged to  
a power outlet, the grounded power outlet must be  
near to the unit and easily accessible.  
When charging your ASUS Phone through your  
computer, ensure that you plug the USB cable to  
your computer’s USB port.  
Avoid charging your ASUS Phone in an environment  
with ambient temperature of above 35oC (95oF).  
NOTES:  
For safety purposes, use ONLY the bundled power  
adapter and cable to avoid damaging your device  
and prevent the risk of injury.  
For safety purposes, use ONLY the bundled power  
adapter and cable to charge your ASUS Phone.  
The input voltage range between the wall outlet  
and this adapter is AC 100V - 240V. The output  
voltage of the USB cable is +5V 2A, 10W.  
Installing a Nano SIM/ microSD card  
To install a Nano SIM/ microSD card:  
1. Push the bundled eject pin into the hole on the  
card slot to eject the tray out.  
2. Insert the Nano SIM or microSD card into the  
appropriate slot.  
3. Push the tray to close it.  
NOTES:  
Both Nano SIM card slots support GSM/GPRS/ EDGE,  
WCDMA/HSPA+/DC-HSPA+, FDD-LTE, and TD-LTE  
DSDV network bands. Both Nano SIM cards can  
connect to VoLTE 4G calling service. But only one  
can connect to FDD-LTE, and TD-LTE data service at a  
time.  
ASUS phone 2G/3G/4G/LTE band compatibility  
varies by region. Check compatibility with your local  
carriers.  
The microSD card slot supports microSD and  
microSDXC card formats.  
CAUTION!  
Do not use sharp tools or solvent on your device to  
avoid scratches on it.  
Use only a standard Nano SIM card on your ASUS  
Phone.  
Federal Communications  
Commission Statement  
This device complies with part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference,  
and (2) this device must accept any interference  
received, including interference that may cause  
undesired operation.  
Changes or modifications not expressly approved by  
the party responsible for compliance could void the  
user‘s authority to operate the equipment.  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against  
harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However,  
there is no guarantee that interference will not occur  
in a particular installation. If this equipment does  
cause harmful interference to radio or television  
reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try  
to correct the interference by one or more of the  
following measures:  
-
Reorient or relocate the receiving antenna.  
-
Increase the separation between the equipment  
and receiver.  
-
Connect the equipment into an outlet on a  
circuit different from that to which the receiver  
is connected.  
-
Consult the dealer or an experienced radio/TV  
technician for help.  
The antenna(s) used for this transmitter must not be  
co-located or operated in conjunction with any other  
antenna or transmitter.  
The country code selection is for non-US models  
only and is not available to all US models. Per FCC  
regulation, all WiFi products that are marketed in US  
must be fixed to US-operated channels only.  
The responsible party within the USA per 47 CFR Part  
2.1077(a)(3):  
ASUS COMPUTER INTERNATIONAL (America)  
Address: 48720 Kato Rd., Fremont, CA 94538, USA  
Telephone: +1-510-739-3777  
RF Exposure Information (SAR)  
This device has been tested and meets applicable  
limits for Radio Frequency (RF) exposure.  
Specific Absorption Rate (SAR) refers to the rate at  
which the body absorbs RF energy. SAR limits are  
1.6 Watts per kilogram (over a volume containing  
a mass of 1 gram of tissue) in countries that follow  
the United States FCC limit and 2.0 W/kg (averaged  
over 10 grams of tissue) in countries that follow the  
Council of the European Union limit. Tests for SAR are  
conducted using standard operating positions with  
the device transmitting at its highest certified power  
level in all tested frequency bands.  
To reduce exposure to RF energy, use a hands-free  
accessory or other similar option to keep this device  
away from your head and body. Carry this device  
at least 10 mm away from your body to ensure  
exposure levels remain at or below the as-tested  
levels. Choose the belt clips, holsters, or other  
similar body-worn accessories which do not contain  
metallic components to support operation in this  
manner. Cases with metal parts may change the RF  
performance of the device, including its compliance  
with RF exposure guidelines, in a manner that has  
not been tested or certified, and use such accessories  
should be avoided.  
The highest FCC SAR values for the device are as  
follows:  
1.04 W/Kg @1g(Head)  
0.99 W/Kg @1g(Body)  
The FCC has granted an Equipment Authorization for  
this device with all reported SAR levels evaluated as  
in compliance with the FCC RF exposure guidelines.  
SAR information on this device is on file with the FCC  
and can be found under the Display Grant section  
ID: MSQX01AD.  
FCC Statement (HAC)  
This phone has been tested and rated for use with  
hearing aids for some of the wireless technologies  
that it uses. However, there may be some newer  
wireless technologies used in this phone that have  
not been tested yet for use with hearing aids. It is  
important to try the different features of this phone  
thoroughly and in different locations, using your  
hearing aid or cochlear implant, to determine if  
you hear any interfering noise. Consult your service  
provider or the manufacturer of this phone for  
information on hearing aid compatibility. If you have  
questions about return or exchange policies, consult  
your service provider or phone retailer.  
The Federal Communications Commission has  
implemented rules and a rating system designed  
to enable people who wear hearing aids to more  
effectively use these wireless telecommunications  
devices. The standard for compatibility of digital  
wireless phones with hearing aids is set forth in  
American National Standard Institute (ANSI) standard  
C63.19-2011. There are two sets of ANSI standards  
with ratings from one to four (four being the best  
rating): an “Mrating for reduced interference  
making it easier to hear conversations  
on the phone when using the hearing aid  
microphone, and a“T”rating that enables the phone  
to be used with hearing aids operating in the telecoil  
mode thus reducing unwanted background noise.  
The Hearing Aid Compatibility rating is displayed on  
the wireless phone box.  
A phone is considered Hearing Aid Compatible  
for acoustic coupling (microphone mode) if it has  
an “M3or “M4rating. A digital wireless phone is  
considered Hearing Aid Compatible for inductive  
coupling (telecoil mode) if it has a“T3”or“T4”rating.  
The tested M-Rating and T-Rating for this device are  
M3 and T3.  
You’ll want to try a number of wireless phones so  
that you can decide which works the best with your  
hearing aids. You may also want to talk with your  
hearing aid professional about the extent to which  
your hearing aids are immune to interference, if they  
have wireless phone shielding, and whether your  
hearing aid has a HAC rating.  
Canada, Industry Canada (IC)  
Notices  
This device complies with Industry Canada’s licence-  
exempt RSS standard(s). Operation is subject to the  
following two conditions:  
(1) This device may not cause interference; and  
(2) This device must accept any interference,  
including interference that may cause  
undesired operation of the device.  
Le présent appareil est conforme aux normes CNR  
d’Industrie Canada applicables aux appareils radio  
exempts de licence. Son utilisation est sujette aux  
deux conditions suivantes :  
(1) Cet appareil ne doit pas créer d’interférences  
nuisibles, et  
(2) Cet appareil doit tolérer tout type  
d’interférences, y compris celles susceptibles de  
provoquer un fonctionnement non souhaité de  
l’appareil.  
Radio Frequency (RF) Exposure Information  
The radiated output power of the Wireless Device  
is below the Industry Canada (IC) radio frequency  
exposure limits. The Wireless Device should be used  
in such a manner such that the potential for human  
contact during normal operation is minimized. This  
device has been evaluated for and shown compliant  
with the IC Specific Absorption Rate (“SAR”) limits  
when installed in specific host products operated in  
portable exposure conditions.  
Canada’s REL (Radio Equipment List) can be found at  
sitt/reltel/srch/nwRdSrch.do?lang=eng.  
Additional Canadian information on RF exposure  
also can be found at the following web address:  
sf08792.html.  
This equipment should be installed and operated  
with minimum distance 10 mm between the radiator  
and your body.  
Informations concernant lexposition aux  
fréquences radio (RF)  
La puissance de sortie émise par cet appareil sans fil  
est inférieure à la limite d’exposition aux fréquences  
radio d’Industrie Canada (IC). Utilisez l’appareil sans  
fil de façon à minimiser les contacts humains lors  
d’un fonctionnement normal.  
Cet appareil été évalué et démontré conforme  
aux limites de DAS (Débit d’absorption spécifique)  
d’IC lorsqu’il est installé dans des produits hôtes  
particuliers qui fonctionnent dans des conditions  
d’exposition à des appareils portables.  
Ce périphérique est homologué pour l’utilisation  
au Canada. Pour consulter l’entrée correspondant  
à l’appareil dans la liste d’équipement radio (REL  
- Radio Equipment List) d’Industrie Canada rendez-  
vous sur :  
do?lang=eng.  
Pour des informations supplémentaires concernant  
l’exposition aux ondes radio au Canada, rendez-vous  
sur :  
sf08792.html.  
Cet appareil doit être installé et utilisé avec un  
minimum de 10 mm de distance entre la source de  
rayonnement et votre corps.  
CAN ICES-3(B)/NMB-3(B)  
This Class B digital apparatus complies with  
Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à  
la norme NMB-003 du Canada.  
This device and its antenna(s) must not be co-  
located or operated in conjunction with any other  
antenna or transmitter, except tested built-in radios.  
The County Code Selection feature is disabled for  
products that are marketed in the US/ Canada.  
Cet appareil et son ou ses antenne(s) ne doivent pas  
être situés près de ou utilisés conjointement avec  
une autre antenne ou un autre émetteur, exception  
faite des radios intégrées qui ont été testées.  
La fonction de sélection de l’indicatif du pays est  
désactivée pour les produits commercialisés aux  
États-Unis et au Canada.  
The IC ID for this device is 3568A-X01AD.  
L’identifiant Industrie Canada de cet appareil est:  
3568A-X01AD.  
Using GPS (Global Positioning  
System) on your ASUS Phone  
To use the GPS positioning feature on your ASUS  
Phone:  
Ensure that your device is connected to the  
Internet before using Google Map or any  
GPS-enabled apps.  
For first-time use of a GPS-enabled app on  
your device, ensure that you are outdoors to  
get the best positioning data.  
When using a GPS-enabled app on your  
device inside a vehicle, the metallic  
component of the car window and other  
electronic devices might affect the GPS  
performance.  
Safety information  
CAUTION! Use of controls or adjustments or  
performance of procedures other than those  
specified herein may result in hazardous radiation  
exposure.  
ASUS Phone care  
Use your ASUS Phone in an environment with  
ambient temperatures between 0 °C (32 °F) and  
35 °C (95 °F).  
The battery  
WARNING: Disassembling the battery by yourself  
will void its warranty and may cause serious harm.  
Your ASUS Phone is equipped with a high  
performance non-detachable Li-polymer battery.  
Observe the maintenance guidelines for a longer  
battery life.  
Do not remove the non-detachable li-polymer  
battery as this will void the warranty.  
Avoid charging in extremely high or low  
temperature. The battery performs optimally in  
an ambient temperature of +5 °C to +35 °C.  
Do not remove and replace the battery with a  
non-approved battery.  
Use only ASUS battery. Using a different battery  
may cause physical harm/injury and may  
damage your device.  
Do not remove and soak the battery in water or  
any other liquid.  
Never try to open the battery as it contains  
substances that might be harmful if swallowed  
or allowed to come into contact with  
unprotected skin.  
Do not remove and short-circuit the battery, as  
it may overheat and cause a fire. Keep it away  
from jewelry or metal objects.  
Do not remove and dispose of the battery  
in fire. It could explode and release harmful  
substances into the environment.  
Do not remove and dispose of the battery  
with your regular household waste. Take it to a  
hazardous material collection point.  
Do not touch the battery terminals.  
To avoid fire or burns, do not disassemble,  
bend, crush, or puncture the battery.  
NOTES:  
Risk of explosion if battery is replaced by an  
incorrect type.  
Dispose of used battery according to the  
instructions.  
The charger  
Use only the charger supplied with your ASUS  
Phone.  
Never pull the charger cord to disconnect it  
from the power socket. Pull the charger itself.  
Caution  
Your ASUS Phone is a high quality piece of  
equipment. Before operating, read all instructions  
and cautionary markings on the (1) AC Adapter.  
Do not use the ASUS Phone in an extreme  
environment where high temperature or high  
humidity exists. The ASUS Phone performs  
optimally in an ambient temperature between  
0 °C (32°F) and 35 °C (95 °F).  
Do not disassemble the ASUS Phone or its  
accessories. If service or repair is required,  
return the unit to an authorized service center.  
If the unit is disassembled, a risk of electric  
shock or fire may result.  
Do not short-circuit the battery terminals with  
metal items.  
Operator access with a tool  
If a TOOL is necessary to gain access to an OPERATOR  
ACCESS AREA, either all other compartments within  
that area containing a hazard shall be inaccessible  
to the OPERATOR by the use of the same TOOL, or  
such compartments shall be marked to discourage  
OPERATOR access.  
Regional notice for Singapore  
This ASUS Phone complies  
with IMDA Standards.  
ASUS Recycling/Takeback Services  
ASUS recycling and takeback programs come  
from our commitment to the highest standards for  
protecting our environment. We believe in providing  
solutions for you to be able to responsibly recycle  
our products, batteries, other components as well as  
com/english/Takeback.htm for detailed recycling  
information in different regions.  
Proper disposal  
Risk of explosion if battery is replaced  
by an incorrect type. Dispose of used  
batteries according to the instructions.  
DO NOT throw the battery in municipal  
waste. The symbol of the crossed out  
wheeled bin indicates that the battery  
should not be placed in municipal waste.  
DO NOT throw this product in municipal  
waste. This product has been designed  
to enable proper reuse of parts and  
recycling. The symbol of the crossed out  
wheeled bin indicates that the product  
(electrical, electronic equipment and  
mercury-containing button cell battery)  
should not be placed in municipal waste.  
Check local regulations for disposal of  
electronic products.  
DO NOT throw this product in fire. DO  
NOT short circuit the contacts. DO NOT  
disassemble this product.  
WARNING  
Cancer and Reproductive Harm-  
NOTE: For more legal and e-labelling information,  
check on your device from Settings > About >  
Legal information.  
ASUS  
Address: 4F, No.150 Li-Te Rd., Peitou, Taipei,  
Taiwan  
Tel: 886228943447  
Fax: 886228907698  
Declaration  
We declare that the IMEI codes for this product, ASUS  
Phone, are unique to each unit and only assigned to  
this model. The IMEI of each unit is factory set and  
cannot be altered by the user and that it complies  
with the relevant IMEI integrity related requirements  
expressed in the GSM standards.  
Should you have any questions or comments regarding  
this matter, please contact us.  
Sincerely yours,  
ASUSTeK COMPUTER INC.  
Tel: 886228943447  
Fax: 886228907698  
Copyright © 2018 ASUSTeK COMPUTER INC.  
All Rights Reserved.  
You acknowledge that all rights of this Manual remain with ASUS.  
Any and all rights, including without limitation, in the Manual or  
website, and shall remain the exclusive property of ASUS and/or its  
licensors. Nothing in this Manual intends to transfer any such rights,  
or to vest any such rights to you.  
ASUS PROVIDES THIS MANUALAS ISWITHOUT WARRANTY OF  
ANY KIND. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS  
MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE  
SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD  
NOT BE CONSTRUED AS A COMMITMENT BY ASUS.  
ZenTalk Fans Forum  
(http://www.asus.com/zentalk/global_forward.php)  

Xerox Xes Synergix 8825 User Manual
Soleus Air Lx 100 User Manual
Sanyo 36uh72r User Manual
Samsung Ad24a1 B1 E12 User Manual
KENWOOD RAPID BAKE BM250 User Manual
KENWOOD KDC 258U User Manual
CRAFTSMAN 536.887250 User Manual
BLACK DECKER KS800E User Manual
BLACK DECKER HT18 User Manual
BLACK DECKER DP240 User Manual