ASUS VZ27EHE User Manual

VZ27E Series  
LCD Monitor  
User Guide  
TCO Certifed  
A third-party certification according to ISO 14024  
Toward sustainable IT products  
Say hello  
to a more sustainable product  
IT products are associated with a wide range of sustainability risks  
throughout their life cycle. Human rights violations are common in the  
factories. Harmful substances are used both in products and their  
manufacture. Products can often have a short lifespan because of poor  
ergonomics, low quality and when they are not able to be repaired or  
upgraded.  
This product is a better choice. It meets all the criteria in TCO Certified,  
the world’s most comprehensive sustainability certification for IT  
products. Thank you for making a responsible product choice, that help  
drive progress towards a more sustainable future!  
Criteria in TCO Certified have a life-cycle perspective and balance  
environmental and social responsibility. Conformity is verified by  
independent and approved verifiers that specialize in IT products, social  
responsibility or other sustainability issues. Verification is done both  
before and after the certificate is issued, covering the entire validity  
period. The process also includes ensuring that corrective actions are  
implemented in all cases of factory non-conformities. And last but not  
least, to make sure that the certification and independent verification is  
accurate, both TCO Certified and the verifiers are reviewed regularly.  
Want to know more?  
Read information about TCO Certified, full criteria documents, news and  
updates at tcocertified.com. On the website you’ll also find our Product  
Finder, which presents a complete, searchable listing of certified  
products.  
iii  
Notices  
Federal Communications Commission Statement  
This device complies with Part 15 of the FCC Rules. Operation is subject  
to the following two conditions:  
This device may not cause harmful interference, and  
This device must accept any interference received including  
interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and used in accordance  
with manufacturer’s instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment to an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
As an Energy Star® Partner, our company has determined  
that this product meets the Energy Star® guidelines for energy  
efficiency.  
This product qualifies for ENERGY STAR in the factory default settings  
which can be restored by “Factory Reset” function in the OSD menu.  
Changing the factory default settings or enabling other features may  
increase power consumption that could exceed the ENERGY STAR  
specified limit.  
Canadian Department of Communications Statement  
This digital apparatus does not exceed the Class B limits for radio  
noise emissions from digital apparatus set out in the Radio Interference  
Regulations of the Canadian Department of Communications.  
This class B digital apparatus complies with Canadian ICES-003.  
Made in China  
iv  
If provided with a 3-pin attachment plug on the power cord, plug the cord  
into a grounded (earthed) 3-pin outlet. Do not disable the power cord  
grounding pin, for example, by attaching a 2-pin adapter. The grounding  
pin is an important safety feature.  
Disposal of Waste Equipment by Users in Private Household in the  
European Union.  
This symbol on the product or on its packaging indicates that this product  
must not be disposed of with your other household waste. Instead, it is  
your responsibility to dispose of your waste equipment by handing it over  
to a designated collection point for the recycling of waste electrical and  
electronic equipment The separate collection and recycling of your waste  
equipment at the time of disposal will help to conserve natural resources  
and ensure that it is recycled in a manner that protects human health and  
the environment. For more information about where you can drop off your  
waste equipment for recycling, please contact your local city office, your  
household waste disposal service or the shop where you purchased the  
product  
Please use ADP-40KD BB of DELTA adapter(VZ27E).  
v
Safety information  
Before setting up the monitor, carefully read all the documentation that  
came with the package.  
To prevent fire or shock hazard, never expose the monitor to rain or  
moisture.  
Never try to open the monitor cabinet. The dangerous high voltages  
inside the monitor may result in serious physical injury.  
If the power supply is broken, do not try to fix it by yourself. Contact a  
qualified service technician or your retailer.  
Before using the product, make sure all cables are correctly connected  
and the power cables are not damaged. If you detect any damage,  
contact your dealer immediately.  
Slots and openings on the back or top of the cabinet are provided for  
ventilation. Do not block these slots. Never place this product near or  
over a radiator or heat source unless proper ventilation is provided.  
The monitor should be operated only from the type of power source  
indicated on the label. If you are not sure of the type of power supply to  
your home, consult your dealer or local power company.  
Use the appropriate power plug which complies with your local power  
standard.  
Do not overload power strips and extension cords. Overloading can  
result in fire or electric shock.  
Avoid dust, humidity, and temperature extremes. Do not place the  
monitor in any area where it may become wet. Place the monitor on a  
stable surface.  
Unplug the unit during a lightning storm or if it will not be used for a  
long period of time. This will protect the monitor from damage due to  
power surges.  
Never push objects or spill liquid of any kind into the slots on the  
monitor cabinet.  
To ensure satisfactory operation, use the monitor only with UL listed  
computers which have appropriate configured receptacles marked  
between 100 ~ 240V AC.  
The socket-outlet shall be installed near the equipment and shall be  
easily accessible  
If you encounter technical problems with the monitor, contact a  
qualified servic er.  
Provide an earthing connection before the mains plug is connected to  
the mains. And, when disconnecting the earthing connection, be sure  
to disconnect after pulling out the mains plug from the mains.  
vi  
WARNING  
Usage of other than specified head- or earphones can result in hearing  
loss due to excessive sound pressures.  
vii  
Care & Cleaning  
Before you lift or reposition your monitor, it is better to disconnect the  
cables and power cord. Follow the correct lifting techniques when  
positioning the monitor. When lifting or carrying the monitor, grasp the  
edges of the monitor. Do not lift the display by the stand or the cord.  
Cleaning. Turn your monitor off and unplug the power cord. Clean the  
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains  
may be removed with a cloth dampened with mild cleaner.  
Avoid using a cleaner containing alcohol or acetone. Use a cleaner  
intended for use with the LCD. Never spray cleaner directly on the  
screen, as it may drip inside the monitor and cause an electric shock.  
The following symptoms are normal with the monitor:  
The screen may flicker during the initial use due to the nature of the  
fluorescent light. Turn off the Power Switch and turn it on again to  
make sure that the flicker disappears.  
You may find slightly uneven brightness on the screen depending on  
the desktop pattern you use.  
When the same image is displayed for hours, an afterimage of the  
previous screen may remain after switching the image. The screen will  
recover slowly or you can turn off the Power Switch for hours.  
When the screen becomes black or flashes, or cannot work anymore,  
contact your dealer or service center to fix it. Do not repair the screen  
by yourself!  
Conventions used in this guide  
WARNING: Information to prevent injury to yourself when trying to  
complete a task.  
CAUTION: Information to prevent damage to the components  
when trying to complete a task.  
IMPORTANT: Information that you MUST follow to complete a  
task.  
NOTE: Tips and additional information to aid in completing a task.  
viii  
Where to find more information  
Refer to the following sources for additional information and for product  
and software updates.  
1. ASUS websites  
The ASUS websites worldwide provide updated information on ASUS  
hardware and software products. Refer to http://www.asus.com  
2. Optional documentation  
Your product package may include optional documentation that may  
have been added by your dealer. These documents are not part of  
the standard package.  
Takeback Services  
ASUS recycling and takeback programs come from our commitment to the  
highest standards for protecting our environment. We believe in providing  
solutions for our customers to be able to responsibly recycle our products,  
batteries and other components as well as the packaging materials.  
information in different region.  
Product information for EU energy label  
VZ27EHE  
ix  
1.1  
Welcome!  
Thank you for purchasing the ASUS® LCD monitor!  
The latest widescreen LCD monitor from ASUS provides a crisper,  
broader, and brighter display, plus a host of features that enhance your  
viewing experience.  
With these features, you can enjoy the convenience and delightful visual  
experience that the monitor brings you!  
1.2  
Package contents  
Check your package for the following items:  
LCD Monitor  
Monitor Base  
Quick Start Guide  
Warranty Card  
1x Power Cord  
1x VGA Cable (option)  
1x HDMI Cable (option)  
If any of the above items is damaged or missing, contact your retailer  
immediately.  
* Also the Replaceable parts required by the TCO Certified.  
ASUS LCD Monitor VZ27E Series  
1-1  
1.3  
Assembling the monitor  
To assemble the monitor:  
1. Place the display flat on a cloth on the table, Then attach the base  
to the arm and fix with the screw to join them tightly. You can easily  
tighten the screw by fingers.  
2. Adjust the monitor to the angle that is most comfortable for you.  
-5 ~ 23  
1
2
3
4
1-2  
Chapter 1: Product Introduction  
1.4  
Connect cables  
1.4.1  
Rear of the LCD monitor  
DCIN  
HDMI  
VGA  
5
4
3
2
1
1. HDMI Port  
2. VGA Port  
3. Earphone - out Port  
4. DC-IN Port  
5. Kensington Lock  
ASUS LCD Monitor VZ27E Series  
1-3  
1.4.1  
Six sides figure  
UNIT:mm(inch)  
(VA)  
1-4  
Chapter 1: Product Introduction  
1.5  
Monitor introduction  
1.5.1  
Using the Controls button  
Use the control button on the back of the monitor to adjust the image  
settings.  
Main Menu  
2
Exit  
4
Power Off  
Input Select  
Brightness  
5
1
3
1. Menu Button:  
Press this button to turn the monitor on when monitor is power off.  
Press this button enter the OSD menu when monitor is power on.  
Enter/select the icon (function) highlighted while the OSD is activated.  
2. Input Select Item / Increase value:  
Add or Increase value  
Input source select hot key  
3.  
Brightness Item / Decrease value:  
Next Item or Decrease value  
Brightness hot key  
4. Close / Return Button:  
Return to previous menu.  
Exit the OSD menu  
.
5. Power Button:  
To activate “Power Off” OSD when monitor is power on.  
ASUS LCD Monitor VZ27E Series  
1-5  
2.1  
Adjusting the monitor  
For optimal viewing, we recommend that you look at the full face of the  
monitor, then adjust the monitor to the angle that is most comfortable  
for you.  
Hold the stand to prevent the monitor from falling when you change its  
angle.  
You can adjust the monitor’s angle from +23˚ to -5˚  
-5 ~ 23  
It is normal that the monitor slightly shakes while you adjust the viewing  
angle.  
ASUS LCD Monitor VZ27E Series  
2-1  
3.1  
OSD (On-Screen Display) menu  
3.1.1  
How to reconfigure  
ASUS VZ27E  
Standard Mode VGA 1920x1080@60Hz  
Splendid  
Standard Mode  
sRGB Mode  
Scenery Mode  
Theater Mode  
Game Mode  
Night View Mode  
Reading Mode  
Darkroom Mode  
1. Press the MENU button to activate the OSD menu.  
2. Press the and buttons to toggle between options in the  
Menu. As you move from one icon to another, the option name is  
highlighted.  
3. To select the highlighted item on the menu press the Center key.  
4. Press the and buttons to select the desired parameter.  
5. Press the Center key to enter the slide bar and then use the or  
buttons, according to the indicators on the menu, to make your  
changes.  
6. Press the ◄/► to move left / right menu.  
2-2  
Chapter 2: Setup  
3.1.2  
1. Splendid  
This function contains eight sub-functions that you can select for  
OSD Function Introduction  
your preference. Each mode has the Reset selection, allowing you to  
maintain your setting or return to the preset mode.  
ASUS VZ27E  
Standard Mode VGA 1920x1080@60Hz  
Splendid  
Standard Mode  
sRGB Mode  
Scenery Mode  
Theater Mode  
Game Mode  
Night View Mode  
Reading Mode  
Darkroom Mode  
Standard Mode: This is the best choice for document editing with  
SPLENDID™ Video Intelligence Technology.  
sRGB Mode: This is the best choice for viewing photos and graphics  
from PCs.  
Scenery Mode: This is the best choice for scenery photo displaying with  
SPLENDID™ Video Intelligence Technology.  
Theater Mode: This is the best choice for movie watching with  
SPLENDID™ Video Intelligence Technology.  
Game Mode: This is the best choice for game playing with SPLENDID™  
Video Intelligence Technology.  
Night View Mode: This is the best choice for playing dark-scene game  
or watching dark-scene movie with SPLENDID™ Video Intelligence  
Technology.  
Reading Mode : This is the best choice for book reading.  
Darkroom Mode : This is the best choice for a weak ambient light  
environmen.  
In the Standard Mode, the Saturation, SkinTone, Sharpness, and ASCR  
functions are not user-configurable.  
In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness, Brightness,  
Contrast and ASCR functions are not user-configurable.  
In the Reading Mode, the Saturation, SkinTone, Sharpness, ASCR, contrast,  
and Color Temp functions are not user-configurable.  
ASUS LCD Monitor VZ27E Series  
3-1  
2. Eye Care  
In this function, you can adjust settings to better protect your eyes.  
ASUS VZ27E  
Standard Mode VGA 1920x1080@60Hz  
Eye Care  
Blue Light Filter  
Rest Reminder  
Color Augmentation  
EyeCheck  
Blue Light Filter: In this function, you can adjust the blue light filter from  
0 to Max.  
*
*
0: No change.  
Max: The higher the level, the less blue light is scattered. When blue  
light filter is activated, the default settings of Standard Mode will be  
automatically imported. Besides maximum level, the brightness is  
user-configurable. Maximum is the optimized setting. It is compliance  
with TUV low blue light certification*. The brightness function is not user  
configurable.  
*
When color augmentation is in default value (50).  
Please refer to the following to alleviate eye strains:  
Users should take some time away from the display if working for long hours.  
It is advised to take short breaks (at least 5 mins) after around 1 hour of  
continuous working at the computer. Taking short and frequent breaks is more  
effective than a single longer break.  
To minimize eye strain and dryness in your eyes, users should rest the eye  
periodically by focusing on objects that are far away.  
Eye exercises can help to reduces eye strain. Repeat these exercises often. If  
eye strain continues please consult a physician. Eye exercises: (1) Repeating  
look up and down (2) Slowly roll your eyes (3) Move your eyes diagonal.  
High energy blue light may lead to eye strain and AMD (Age-Related Macular  
Degeneration). Blue light filter to reduce 70% (max.) hrmful blue light to  
avoiding CVS (Computer Vision Syndrome) when the user adjusts blue light  
filter bar to maximum level.  
3-2  
Chapter 3: General Instruction  
Rest Reminder: This function provides you a rest reminder according  
to how long you set for your working time. For example, if you set a  
30-minute working time and there will be a pop up reminder appeared on  
the upper left corner of the monitor for 5 seconds when time is up. Press  
any key to make this reminder OSD disappear.  
When this function is enabled, the following functions are not available:  
Splendid Demo Mode, GamePlus, QuickFit.  
Color Augmentation: The adjusting range of color enhancement is from  
0 to 100.  
This function is not available when sRGB Mode is selected in the Splendid  
menu.  
This function is not available when Reddish or Yellowish is selected in the  
Skin Tone menu.  
EyeCheck: The EyeCheck function contains three patters: (1) Snellen  
Chart (2) Amslter Grid (3) Astigmastism.  
E
Snellen Chart  
Amslter Grid  
12  
Astigmatism  
ASUS LCD Monitor VZ27E Series  
3-3  
3. Color  
Select the image color you like from this function.  
ASUS VZ27E  
Standard Mode VGA 1920x1080@60Hz  
Color  
Brightness  
Contrast  
Saturation  
Color Temp.  
Skin Tone  
Brightness: The adjusting range is from 0 to 100.  
Contrast: The adjusting range is from 0 to 100.  
Saturation: The adjusting range is from 0 to 100.  
Color Temp.: Contains three preset color modes (Cool, Normal, Warm)  
and User Mode.  
Skin Tone: Contains three color modes including Reddish, Natural, and  
Yellowish.  
In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-  
configurable; the adjusting range is from 0 ~ 100.  
3-4  
Chapter 3: General Instruction  
4. Image  
You can adjust the image Sharpness, Trace Free, Aspect Control,  
VividPixel, ASCR, Position (VGA only), Focus (VGA only), and Auto  
Adjust (VGA only), from this main function.  
ASUS VZ27E  
Standard Mode VGA 1920x1080@60Hz  
Image  
Sharpness  
Trace Free  
Aspect Control  
VividPixel  
ASCR  
Motion Sync  
FreeSync  
Position  
Focus  
Auto Adjust  
Sharpness: Adjusts the picture sharpness. The adjusting range is from  
0 to 100.  
Trace Free: Speeds up the response time by Over Drive technology. The  
adjusting range is from lower 0 to faster 100.  
Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”, “Overscan(Only  
For HDMI)”.  
VividPixel: ASUS Exclusive Technology that brings lifelike visuals for  
crystal-clear and detail-oriented enjoyment. The adjusting range is from  
0 to 100.  
ASCR: Select ON or OFF to enable or disable dynamic contrast ratio  
function.  
Motion Sync: Check to decrease motion blur and minimize ghosting part  
when on-screen objects are fast moving. It can only be turned on at 75Hz  
or above.  
FreeSync: It can allow a FreeSync supported graphics source to  
dynamically adjust display refresh rate based on typical content frame  
rates for power efficient, virtually stutter free and low-latency display  
update.  
Position: Adjusts the horizontal position (H-Position) and the vertical  
position (V-Position) of the image. The adjusting range is from 0 to 100  
(Only available for VGA input).  
Focus: Reduces Horizonal-line noise and Vertical-line noise of the image  
by adjusting (Phase) and (Clock) separately. The adjusting range is from  
0 to 100 (Only available for VGA input).  
Auto Adjust.: Automatically adjust the image to its optimized position,  
clock, and phase. (Only available for VGA input.)  
ASUS LCD Monitor VZ27E Series  
3-5  
4:3 is only available when input source is in 4:3 formatOverScan is only  
available for the HDMI input source  
Phase adjusts the phase of the pixel clock signal. With a wrong phase  
adjustment, the screen shows horizontal disturbances.  
Clock (pixel frequency) controls the number of pixels scanned by one  
horizontal sweep. If the frequency is not correct, the screen shows vertical  
stripes and the image is not proportional.  
5. Input Select  
Select the input source from VGA,HDMI nput signal.  
ASUS VZ27E  
Standard Mode VGA 1920x1080@60Hz  
Input Select  
VGA  
HDMI  
3-6  
Chapter 3: General Instruction  
6. System Setup  
Adjusts the system configuration.  
ASUS VZ27E  
Standard Mode VGA 1920x1080@60Hz  
System Setup  
Splendid Demo Mode  
Volume  
GamePlus  
QuickFit  
ECO Mode  
OSD Setup  
Language  
More  
ASUS VZ27E  
Standard Mode VGA 1920x1080@60Hz  
System Setup  
Back  
Key Lock  
Information  
Power Indicator  
Power Key Lock  
All Reset  
Splendid Demo Mode: Activate the demo mode for the Splendid  
function.  
Volume: Adjusts the output volume level.  
GamePlus: The GamePlus Function provides a toolkit and creates a  
better gaming environment for users when playing different types of  
games. Particularly, Aimpoint function is specially designed for new  
gamers or beginners interested in First Person Shooter (FPS) games.  
To active GamePlus:  
Select ON to enter the GamePlus main menu.  
Press and to select between Crosshair, Timer, FPS Counter,  
and Display Alignment function.  
Press Center key to confirm the function you choose. Press to go  
back. Press to go off, and exit.  
ASUS LCD Monitor VZ27E Series  
3-7  
GamePlus main menu  
GamePlus-Crosshair  
GamePlus  
GamePlus  
Crosshair  
Timer  
FPS  
FPS Counter  
Display Alignment  
GamePlus main-Timer  
GamePlus -FPS counter  
GamePlus  
GamePlus  
FPS  
QuickFit: contains three patterns: (1) Grid (2) Paper size (3) Photo size.  
1. Grid pattern: Facilitates designers and users to organize  
content and layout on one page and achieve a consistent  
look and feel.  
Alignmenꢀ ꢁꢂiꢃ ꢄ  
Alignmenꢀ ꢁꢂiꢃ 2  
3-8  
Chapter 3: General Instruction  
2. Paper size: Provides users to view their documents in real  
size on the screen.  
B5  
Letter  
B5  
Letter  
EXIT  
EXIT  
3. Photo size: Provides photographers and other users to  
accurately view and edit their photos in real size on the  
screen.  
2x2  
8x10  
4x6  
3x5  
ꢀx7  
ECO Mode: Activate the ecology mode for power saving.  
OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of  
the OSD screen.  
Language: Select OSD language. The selections are: English, French,  
German, Spanish, Italian, Dutch, , Russian, Poland, Czech, Croacia,  
Hungary, Romania, Portugal, Turkey, Simplified Chinese, Traditional  
Chinese, Japanese, Korean, Persian, Thai, Indonesian.  
More: Return the next page of System Setting.  
Back: Return the previous page of System Setting.  
Key Lock: Disable all key functions. Pressing the second button on the  
right for more than five seconds to disable key lock function.  
Information:Displays the monitor information.  
Power Indicator: Turn the power LED indicator on/off.  
Power Key Lock: To disable / enable power key  
All Reset: Selects “Yes” to revert all settings to the factory default mode.  
ASUS LCD Monitor VZ27E Series  
3-9  
7. Shortcut  
Selecting this option allows you to set two shortcut keys.  
ASUS VZ27E  
Standard Mode VGA 1920x1080@60Hz  
Shortcut  
Shortcut 1  
Shortcut 2  
Blue Light Filter  
Splendid  
Brightness  
Auto Adjust  
Contrast  
Input Select  
Color Temp.  
QuickFit  
GamePlus  
Shortcut 1: User can select from “Blue Light Filter” “Splendid”,  
“Brightness”, “Auto Adjust”, “Contrast”, “Input Select”, “Color  
Temp.”, “Volume”, “QuickFit”, “GamePlus”, and set as shortcut  
key. The default setting is Brightness.  
Shortcut 2: User can select from “Blue Light Filter” “Splendid”,  
“Brightness”, “Auto Adjust”, “Contrast”, “Input Select”, “Color  
Temp.”, “Volume”, “QuickFit”, “GamePlus”, and set as shortcut  
key. The default setting is Blue Light Filter.  
3-10  
Chapter 3: General Instruction  
3.2  
Model  
Specifications  
VZ27EHE  
27”W  
Panel Size  
Max. Resolution  
Brightness (Typ.)  
1920x1080  
250cd/m2  
Intrinsic Contrast Ratio  
(Typ.)  
1000:1  
Viewing Angle (CR>10)  
Display Colors  
Response Time  
Sound from HDMI  
HDMI input  
178°(V) /178°(H)  
16.7 M(6bit+FRC)  
5ms (G To G )  
Yes  
Yes  
D-Sub input  
Yes  
Yes  
Audio Line-out  
Power ON Consumption  
Note  
< 16W  
Energy star 8.0 standard  
Black  
Chassis Colors  
Power saving mode  
Power off mode  
Tilt  
< 0.5W  
< 0.5W  
-5° ~ +23°  
VESA Wall Mounting  
Yes (100mm x 100mm)  
Phys. Dimension with  
stand (WxHxD)  
612mm x 434mm x 210mm  
Phys. Dimension without  
stand (WxHxD)  
612mm x 356mm x 39mm  
(For VESA Wall Mount)  
Box Dimension (WxHxD)  
Net Weight (Esti.)  
Gross Weight (Esti.)  
Voltage Rating  
Temperature  
678mm x 532mm x 124mm  
3.6kg  
5.2 Kg  
DC 19V(Built-in)  
0
°C ~ +35°C  
10% 80%  
12,000 feet (3,658 m)  
~
Humidity  
Altitude  
ASUS LCD Monitor VZ27E Series  
3-11  
3.3  
Troubleshooting (FAQ)  
Problem  
Possible Solution  
button to check if the monitor is in the  
Power LED is not ON  
Press the  
ON mode.  
Check if the power cord is properly connected to  
the monitor and the power outlet.  
Check Power Indicator function in main menu OSD.  
Select “ON” to turn on power LED.  
The power LED lights amber and  
there is no screen image  
Check if the monitor and the computer are in the  
ON mode.  
Make sure the signal cable is properly connected  
the monitor and the computer.  
Inspect the signal cable and make sure none of the  
pins are bent.  
Connect the computer with another available  
monitor to check if the computer is properly  
working.  
Screen image is too light or dark  
Adjust the Contrast and Brightness settings via  
OSD.  
Screen image bounces or a wave  
pattern is present in the image  
Make sure the signal cable is properly connected to  
the monitor and the computer.  
Move electrical devices that may cause electrical  
interference.  
Screen image has color defects  
(white does not look white)  
Inspect the signal cable and make sure that none of  
the pins are bent.  
Perform Reset via OSD.  
Adjust the R/G/B color settings or select the Color  
Temperature via OSD.  
No sound or sound is low  
Make sure the audio cable is properly connected to  
the monitor.  
Adjust the volume settings of both your monitor and  
computer.  
Make sure the computer sound card driver is  
properly installed and activated.  
Make sure the audio source is correct on the OSD.  
3-12  
Chapter 3: General Instruction  
3.4  
Supported Timing List  
PC Supported Primary Timing  
Resolution  
640x480  
640x480  
640x480  
800x600  
800x600  
800x600  
800x600  
1024x768  
1024x768  
1024x768  
1152x864  
1280x960  
1280x1024  
Refresh Rate  
Horizontal Frequency  
31.469kHz  
37.861kHz  
37.5kHz  
60Hz  
72Hz  
75Hz  
56Hz  
60Hz  
72Hz  
75Hz  
60Hz  
70Hz  
75Hz  
75Hz  
60Hz  
60Hz  
35.156kHz  
37.879kHz  
48.077kHz  
46.875kHz  
48.363kHz  
56.476kHz  
60.023kHz  
67.5kHz  
60kHz  
63.981kHz  
1280x1024  
1440x900  
1680x1050  
1920x1080  
1920x1080  
75Hz  
60Hz  
60Hz  
60Hz  
75Hz  
79.976kHz  
55.935kHz  
65.29kHz  
67.5kHz  
83.894kHz  
IBM Modes, Factory Preset Timing  
Resolution  
Refresh Rate  
Horizontal Frequency  
640x350  
720x400  
70Hz  
70Hz  
31.469kHz  
31.469kHz  
MAC Modes, Factory Preset Timing  
Resolution  
Refresh Rate  
Horizontal Frequency  
640x480  
832x624  
67Hz  
75Hz  
35kHz  
49.725kHz  
VESA Modes, User Available Timing  
Resolution  
Refresh Rate  
Horizontal Frequency  
848x480  
1280x720(RB)  
1280x720  
1280x800(RB)  
1280x800  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
31.02kHz  
44.444kHz  
44.772kHz  
49.306kHz  
49.702kHz  
47.712kHz  
55.469kHz  
64.674kHz  
66.587kHz  
1366x768  
1440x900(RB)  
1680x1050(RB)  
1920x1080  
ASUS LCD Monitor VZ27E Series  
3-13  
SD/HD Timings (HDMI input only)  
HDMI 1.3,CEA-861B Formats, SD/HD Supported Primary Timings of (HDMI input only)  
Resolution  
Refresh Rate  
Horizontal Frequency  
640x480P  
720x480P  
720x576P  
1280x720P  
1280x720P  
1920x1080i  
1920x1080i  
59.94 / 60Hz  
59.94 / 60Hz  
50Hz  
50Hz  
59.94 / 60Hz  
50Hz  
31.469 / 31.5kHz  
31.469 / 31.5kHz  
31.25kHz  
37.5kHz  
44.955 /45kHz  
28.125kHz  
59.94 / 60Hz  
33.716 / 33.75kHz  
HDMI 1.3,CEA-861B Formats, SD/HD Supported Optional Timings of (HDMI input only)  
Resolution  
Refresh Rate  
Horizontal Frequency  
1440x480P  
1440x576P  
1920x1080P  
1920x1080P  
59.94 / 60Hz  
50Hz  
50Hz  
59.94 / 60Hz  
31.469 / 31.5kHz  
31.25kHz  
56.25kHz  
67.433 / 67.5kHz  
* The modes not listed in the above tables may not be supported. For optimal resolution, we  
recommend that you choose a mode listed in the above tables.  
3-14  
Chapter 3: General Instruction  

Toshiba Air Conditioner Rav Sm1403dt A User Manual
Sanyo 36x72r User Manual
Samsung Um 18a1 B1 E2 User Manual
Samsung Sh12zsgx User Manual
Panasonic Cu W12ekr User Manual
MAKITA SK105D User Manual
LG 55VM5B 02 User Manual
LEVOIT VESYNC CORE 400S LAP C401S WAAA User Manual
BROTHER HL 5440D User Manual
BLACK DECKER DVJ325J User Manual